Scribd Logo
Upload

Welcome to Scribd!

  • 179 views

    Proposed TCDA Supplement - Draft: GEH-6195C Application Manual

    Uploaded by

    austintan
    This document provides information on jumper positions and application notes for a proposed TCDA supplement. It includes tables that specify the jumper settings for different card types and locations to set the binary address for IONET communication. The settings vary depending on the card type and location. It also provides notes on jumper functions like enabling test modes, termination resistors, and supported IONET frequencies.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Proposed TCDA Supplement - Draft: GEH-6195C Application Manual

    Uploaded by

    austintan
    179 views1 page
    This document provides information on jumper positions and application notes for a proposed TCDA supplement. It includes tables that specify the jumper settings for different card types and locations to set the binary address for IONET communication. The settings vary depending on the card type and location. It also provides notes on jumper functions like enabling test modes, termination resistors, and supported IONET frequencies.

    Original Title

    geh-6195 tcda supplement

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on jumper positions and application notes for a proposed TCDA supplement. It includes tables that specify the jumper settings for different card types and locations to set the binary address for IONET communication. The settings vary depending on the card type and location. It also provides notes on jumper functions like enabling test modes, termination resistors, and supported IONET frequencies.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    179 views1 page

    Proposed TCDA Supplement - Draft: GEH-6195C Application Manual

    Uploaded by

    austintan
    This document provides information on jumper positions and application notes for a proposed TCDA supplement. It includes tables that specify the jumper settings for different card types and locations to set the binary address for IONET communication. The settings vary depending on the card type and location. It also provides notes on jumper functions like enabling test modes, termination resistors, and supported IONET frequencies.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    GEH-6195C Application Manual

    Proposed TCDA Supplement - Draft

    TCDA Jumper Position Application Notes


    <QDn>
    Location 1,2,3
    <CD>
    Location 1
    <DD>
    Location 1,3

    Rev. TCDAG#A
    and TCDAG#B
    and TCDAH#B
    Default
    J1 Off On = Factory Card Test Enable
    Test OFF for proper operation.
    J2 In = Out = Not IONET Termination Resistor
    J3 Terminated Terminated
    1
    0 Binary
    weighted
    value
    J6 0 1 IONET Address
    J5 0 2 This configuration varies for:
    J4 0 4 <QDn>,<CD>, <DD> See next table.
    J7 1 = enable 0 = disable Enable Stall Timer
    Enable = normal operation
    J8 In = operate Out = Test Enable
    test mode In = normal operation
    JP9 B = 16 A = 11.7 IONET Frequency (Applies only to
    TCDAH#B):
    B for all DS200TCDAF1B prom sets, and
    F1A prom sets with rev CI and above;
    A for DS200TCDAF1A prom sets up to
    and including rev CE.

    CORE Location Address J6 J5 J4


    <QD1> 1, 2, 3 0 0 0 0
    <QD2> 1, 2, 3 1 1 0 0
    <CD> 1 0 0 0 0
    <DD> 1 0 0 0 0
    <DD> 3 1 1 0 0
    TCDA --Binary Summation Card Addressing - J4, J5, J6

    A-8

    You might also like