SRS1500

Active Subwoofer
SERVICE MANUAL
2000 MACKIE DESIGNS, INC.
Go To Bulletins
2
















































SERVICE ON THIS EQUIPMENT IS TO BE PERFORMED BY
EXPERIENCED REPAIR TECHNICIANS ONLY
3
C O NTENTS
Introduction ..................................................................... 3
Overview.......................................................................... 4
Specifications................................................................... 6
Safety test ........................................................................ 7
Parts................................................................................... 8
Service Bulletin ................................................................. 14
Fold-out Sections
Schematics and PCB layouts
Amplifier board .......................................................... 269-1
Input board ................................................................ 270-1
AC Input board ......................................................... 271-1
Assembly drawings.................................................... Assembly-1
INTRODUCTION
This manual contains basic service information. It is essential that you have a copy of the
users manual as this contains the complete operating instructions.
SERVICE TECHNICAL ASSISTANCE
Mackie Designs, Service Technical Assistance, is available 8AM - 5PM PST, Monday through
Friday for Authorized Mackie Service Centers, at 1-800-258-6883. Feel free to call with any
questions and speak with a carefully-calibrated technician. If one is not available, leave
a detailed message and a qualified Mackoid will return your call asap.
DISCLAIMER
The information contained in this manual is proprietary to Mackie Designs, Inc. The entire
manual is protected under copyright and may not be reproduced by any means without
express written permission from Mackie Designs, Inc.


SERVICE ON THIS EQUIPMENT IS TO BE PERFORMED BY
EXPERIENCED REPAIR TECHNICIANS ONLY
Click on any item to open that page
ALL BOARDS
4
Overview
The SRS1500 is a high output active subwoofer system. It features a high-precision 15
transducer combined with application specific amplifier technology. The system is
composed of a single, compact subwoofer cabinet with built-in control and amplifier
electronics.
The SRS1500 accepts a stereo line-level signal via female XLR input jacks. Male XLR Thru
jacks are provided for daisy-chaining the signal to additional SRS1500 cabinets. The built-
in crossover separates the low frequencies from the high frequencies, and routes the high
frequencies to the male XLR high-pass output jacks. Connect these to the inputs of full-
range active speakers such as the Mackie Designs SRM450s, or to an amplifier powering a
pair of passive speakers such as the Mackie Designs M1400i and C300s. A Phase switch
gives you the option of reversing the phase to the full-range speakers by 180. A
Subwoofer Level control allows you to adjust the balance between the subwoofer and
the full-range speakers.
The built-in amplifier produces up to 600 watts of power. The amplifier module sits on a
large heatsink that eliminates the need for fans, dramatically extending life expectancy,
and eliminating maintenance cycles. A tremendous benefit of having the amplifier
located within the subwoofer cabinet is the speed with which power is delivered to the
woofer.
The cabinet is constructed with 18mm thick multi-layered birch plywood. Carrying
handles are integrated into each side for easy loading and transport.
POWER Switch
Use this switch to turn the SRS1500 on and off. Make sure the signal sources level control
is turned down before you turn it on.
AC Receptacle
This is where you connect the AC linecord to provide AC power to the SRS1500s built-in
power amplifiers. Plug the linecord into an AC socket properly configured for your
particular model.
THERMAL Indicator
The SRS1500 has a thermal protection circuit that monitors the internal temperature of the
amplifier and heatsink. If the temperature should exceed a safe operating level, the
signal is muted and the THERMAL indicator lights. When the temperature cools to a safe
level once again, the thermal protection circuit deactivates and normal operation
continues.
Note: Activation of the thermal protection circuit is an indication that you must take
steps to avoid continued thermal problems.
POWER Indicator
When the POWER switch is turned on and the linecord is connected to an active AC
power supply, this indicator lights green. The blue LED on the front of the cabinet works
in the same way.
5
POWER THERMAL
THRU
(FULL RANGE OUTPUT)
HIGH PASS
(MID/HIGH FREQ)
OUTPUT
SUBWOOFER
CONTROL FULL RANGE
INPUT
PARALLEL
120Hz
ON
OFF
NORMAL
REV180
PHASE
120 VAC 60HZ 350W
POWER
L
R
L
R
SUBWOOFER
LEVEL
(+4dBu )
NORMAL
+15 OO
IN OUT
FULL RANGE INPUT
These are female XLR-type connectors that accept a balanced line-level signal from a
mixing console or other signal source.They are wired per AES (Audio Engineering Society)
standards:
XLR
Hot (+) Pin 2
Cold () Pin 3
Shield (Ground)Pin 1
THRU (FULL RANGE OUTPUT)
These are male XLR-type connectors that produce exactly the same signal that is
connected to the FULL RANGE INPUT jack. Use it to daisy-chain several SRS1500s together
off the same signal source.
HIGH PASS (MID/HIGH FREQ) OUTPUT
These are male XLR-type connectors that produce the frequencies above 120Hz. Connect
these to a pair of full-range active speakers or to an amplifer/ passive speaker
combination. The SRS1500 reproduces the frequencies below 120Hz.
SUBWOOFER LEVEL Control
This adjusts the subwoofer level. Use this control to balance the volume between the
subwoofer and the full-range speakers. The center detent position is +4 dBu gain, which is
the normal position. Unity gain is at the 9 oclock position.
PHASE
This switch reverses the phase of the signal at the HIGH PASS OUTPUT jacks. Depending on
the placement of the SRS1500 subwoofer relative to the full-range speakers, you may get
a better low-frequency response in the room if you reverse the phase of the signal.
6
Specifications
Ge ne ra l Spe c ific a tions
Freq. Range 40Hz120Hz
Freq. Response 45Hz120Hz (3 dB)
Maximum SPL @ 1m 123 dB
Peak Output @ 1m 126 dB
Crossover Freq. 120Hz (12 dB/octave)
Input Type
Balanced differential
Input Impedance 50k ohms
Prote c tion
Input Protection Level protected
Thermal Protection Input stage muting, auto-
reset
Tra nsduc e r Spe c ific a tions
Low-Frequency Transducer
Diameter 15 (381mm)
Voice Coil Diameter 3.0 (75mm)
Power Handling 350 watts rms
Powe r Amplifie r
Low-Frequency Power Amplifier
Burst Capability 600 watts
Rated THD <0.05%
Cooling Passive Heatsink
Line Input Powe r
US 120V, 60Hz
Europe 230V, 50Hz
Physic a l Prope rtie s
Height 23.25 (590mm)
Width 17.0 (432mm)
Depth 23.5 (597mm)
Weight 100 lbs. (45.4kg)
Enclosure 18mm thick multi-layered
baltic birch tree wood
Enc losure Ge ome try
Rectangular
Mounting Me thods
Floor mount only
7
You must perform the following leakage test before returning the unit to your customer.
Take every safety precaution to protect yourself while doing this test.
1. Make a small loading RC circuit as shown in the diagram below, and connect the AC
volt meter between the AC power source ground and any exposed metal on the unit
under test.
2. Connect the unit under test to an AC power source using a ground-lift adaptor, leaving
the units safety ground floating. Turn the unit on.
3. The meter reading should be less than 750mVAC (note: this is equivalent to 0.5mA of
leakage current).
4. Flip the plug over in the receptical so the hot and neutral are swapped.
Verify that the reading is still less then 750mVAC.
5. If either reading is greater than 750mVAC, then you must investigate and repair the unit
before returning it to your customer.
Safety test
8
MASTER PARTS LIST
090-104-00 SRS1500 120V MODEL
PART NUMBER DESCRIPTION REV QPA NOTES
055-313-00 PCB ASSY LED SRS1500 A 1
092-903-00 LC IEC SJ T 1250W 10A/125V A 1 LINECORD 120VAC
080-101-00 SA AMP A 1 AMPLIFIER SUBASSEMBLY
490-022-00 WOOFER 15IN SPKR A 1
490-045-00 CABINET HOUSING SRS-1500 A 1
490-051-00 POLE MOUNT CUP SRS1500 A 1
550-476-00 HANDLE HOUSING SPKR A 2
550-529-00 FAB BRKT POLE SRS1500 A 1
550-530-00 FAB BRKT HANDLE SRS1500 B 4
551-507-00 CAST HANDLE SPKR A 2
700-035-04 TF 6-32X3/8 PHP CLRZC A 4 SCREWS
700-038-00 MCH 10-32X1-1/4 SS SKTCAP A 8 SCREWS
700-051-10 MCH 8-32X7/8 PHP BLKZC A 8 SCREWS
700-130-15 MCH 10-32X1 1/2 BTNSK BLK A 10 SCREWS
700-131-00 10-32X1.25 FL 82D HEX BLK A 8 SCREWS
701-022-00 #4X1/ 4 PHP II TYP B BLK B 1 SCREWS
701-025-00 WOOD #10 X 3/ 4 PHP BLK A 12 WOOD SCREWS
701-030-00 WOOD #6X1/ 2 RND HD PH BLK A 12 WOOD SCREWS
705-021-01 NUT PALNUT 7/16OD STLZC A 2 AHH NUTS!
710-057-00 WASH FLT ID .195 SS BLK A 10 WASHER
760-115-00 SIDE HANDLE GRIP SRM450 A 2
760-142-00 PORT SUB WOOFER SRS1500 A 2
790-002-00 BAG POLY 12 X 18 2MIL A 1
790-019-00 P/FOAM 48X28X1/32 P/F SHT A 0.01
800-144-00 BOX SRS1500 A 1
800-162-00 BOX BOTTOM TRAY SRS1500 A 1
810-100-00 INSERT TOP/BTM SRS1500 A 2
810-101-00 INSERT CRN RAILS SRS1500 A 4
820-187-00 OWNERS MANUAL SRS1500 A 1
840-227-00 LOGO MACKIE LDSKR SERIES D 1
840-273-00 LOGO SRS1500 ACTIVE C 1
SRS1500 PARTS LIST
PART# DESCRIPTION PAGE
090-104-00 SRS1500 MASTER PARTS 8
080-101-00 AMPLIFIER SUBASSEMBLY 9
055-269-00 PCB ASSY AMP SRS1500 11
055-270-00 PCB ASSY INPUT SRS1500 12
055-271-00 PCB ASSY AC INPUT SRS1500 13
RECONE KIT L15P530-SRS: PART # 11467001
9
080-101-00 AMPLIFIER SUBASSEMBLY
PART NUMBER DESCRIPTION REV QPA
040-406-00 DIS 16GA WHT 4.5 IN QDX2 A 2
040-407-00 DIS 16GA BLK 4.5 IN QDX2 A 2
040-408-00 CBL ASY 2P 22G 45IN SPOX B 1
055-269-00 PCB ASSY AMP SRS1500 A 1 SEE PAGE 10
055-270-00 PCB ASSY INPUT SRS1500 A1 1 SEE PAGE 12
055-271-00 PCB ASSY AC INPUT SRS1500 A 1 SEE PAGE 13
080-155-00 SA XFMR SRS1500 W/ FERRITE A 1 TRANSFORMER SUBASSEMBLY
080-184-00 SA 040-409-00/ 601-039-00 A 1
080-185-00 SA 040-404/ 405/ 601-040-00 A 1
410-018-00 SILPAD 4 C SRS1500 4.46 C 1
410-019-00 SILPAD 6C SRS1500 6.56 C 1
410-020-00 SILPAD DIGI SRS1500 5.02 A 1
410-022-00 MICA 1.08x.90x.002 SRS150 A 2
410-023-00 MICA .90x.70x.002 SRS1500 A 2
500-055-00 SW PWR RCKR QD SRS1500 A 1 POWER SWITCH
550-249-00 PLATE XFMR .335IDX4.528OD A 1
550-477-00 SCR PANEL REAR SRS-1500 A 1
550-492-00 PNT SUPP AMP SRS1500 A 2
550-493-00 FAB SUB HTSINK SRS1500 A 1
550-509-00 FAB SUB HTSK LFT SRS1500 A 1
550-510-00 FAB SUB HTSK RGT SRS1500 A 1
550-513-00 GEORGES SPRING CLIP SRS A 7
550-569-00 PLATE XFMER SRS1500 A 1
700-028-00 SEMS 6-32X1/4 PHP BLKZC B 8
700-028-03 SEMS 6-32X1/2 PHP BLKZC A 4
700-055-00 MCH 4-24X3/8 PHP BLK HILO A 12
700-113-01 BOLT CAR 5/16-18 2.5I STL A 1 TRANSFORMER CARRIAGE BOLT
705-001-00 KEPNUT 6-32 A 19
705-008-00 NUT LOCK 8-32 A 4
705-011-00 NUT LOCK 10-32 A 4
705-018-00 NUT HEX 5/16-18 (GD-5) A 1 TRANSFORMER MOUNTINIG NUT
706-080-00 MOUNT VIBRATION 1.0 DIA A 4
706-084-00 STDF 1/4 HEX 6-32 .187 FF A 7
710-017-00 WASH SPLTLCK 5/16 HEAVY A 1
710-024-00 WASH FLAT 5/16 HARD (USS) A 1
710-054-00 WASH FLT .312 OD A 7
710-056-00 WASH SHLD #6 .36 OD NYLON A 2
712-061-00 NO4 VINYL COAT WIRE CLAMP A 1
720-006-00 TAPE DS 60M .50W VYNL BLK A AR
730-001-00 THERMAL J OINT COMPOUND A AR
730-025-00 LOCTITE 222 A AR
730-026-00 ADHESIVE RTV162 A AR
740-001-00 TYRAP 3-1/4L A 2
740-002-00 TYRAP MOUNT .75 X .75 B 1
760-081-00 KNOB TRIM W/PNTR A 1
780-111-00 WASH RUB (W/TRANSFORMER) A 2
780-150-00 SHIELD AMP PCB SRS1500 A 1
790-001-00 BAG POLY 20 X 30 4MIL A 1
800-166-00 BOX SET SA AMP SRS1500 0.25
10
AMP PCB ASSEMBLY 055-269-00 REV:A
PART NUMBER DESCRIPTION VALUE REFERENCE DESIGNATORS
110-001-00 RES CF .25W 5% 10 OHM 10 5% R1 R3 R43 R45 R65 R68
110-018-00 RES CF .25W 5% 51 OHM 51 5% R26 R38
110-025-00 RES CF .25W 5% 100 OHM 100 5% R50 R59
110-033-00 RES CF .25W 5% 220 OHM 220 5% R47 R64
110-039-00 RES CF .25W 5% 390 OHM 390R R57 R74
110-041-00 RES CF .25W 5% 470 OHM 470 5% R29 R35
110-049-00 RES CF .25W 5% 1K OHM 1K 5% R25 R37 R48-49 R54-55 R60-61 R71-72
110-051-00 RES CF .25W 5% 1K2 OHM 1k2 R51 R56 R58
110-057-00 RES CF .25W 5% 2K2 OHM 2K2 R6 R12-15 R19 R27 R39 R46 R66 R73 R76
110-080-00 RES CF .25W 5% 20K OHM 20K 5% R70 R77
110-083-00 RES CF .25W 5% 27K OHM 27K 5% R75
120-025-00 RES MO .5W 5% 1 OHM 1R R17 R24
120-064-00 RES MO .5W 5% 43 OHM 43 5% R34
120-081-00 RES MO .5W 5% 2K2 OHM 2K2 5% R30 R33
120-090-00 RES MO .5W 5% 5.1K OHM 5.1K 5% R16 R18 R20 R23 R28 R40
121-025-00 RES MO 1W 5% 1 OHM 1R R7-8 R22 R41
121-085-00 RES MO 1W 5% 3K3 OHM 3k3 R44 R67
123-033-00 RES MO 3W 5% 2.2 OHM 2.2 5% R5 R10-11
125-034-00 RES WW 5W 0.15 OHM 0.15R R9 R21 R31 R36
125-035-00 RES WW 5W 5% 1k OHM 1k R32 R42 R52-53 R62-63
125-036-00 RES WW 5W 5% 1K5 OHM 1k5 R4
125-037-00 RES WW 5W 5% 2K2 OHM 2k2 R2
125-038-00 RES WW 5W 5% 470 OHM 470 R69 R78
200-007-02 PLY .01UF 10% 100V TR 0.01 C28-29
200-036-02 PLY/BX .1UF 10% 250V TR .1uF 10% C10 C15 C30
200-042-02 PLY/BX .22UF 10%250V TR 0.22 10% C4 C7 C20 C22-24 C32-38
200-049-00 PLY BOX LW IND 22UF SPL 22UF C5-6
200-062-00 PLY FILM 6.8UF 10% 100V 6.8UF C1-2 C14
205-006-02 MICA 30PF 5% 500V T/A 30pF 5% C31
220-007-00 LYT 100UF 20% 100V RAD 100UF 10% C17-18
220-011-02 LYT 100UF 20% 25V RAD 100UF 10% C3 C8 C16 C19 C26-27
220-016-00 LYT 1000UF 20% 25V RAD 1000UF 10% C12-13
220-027-02 LYT 10UF 20% 50V RAD TR 10UF 10% C21 C25
220-033-00 LYT 10000UF 20% 80V RAD 10,000uF20% C9 C11
NOT USED C39-40
300-007-00 DIO SW 1SS244-SUB 1SS245 1SS244 D13 D15 D17 D19 D22-23 D25 D28 D30
D35 D37-40
301-019-00 DIO PWR BRDG 25A 400V SIP 25A D10
301-059-00 FAST DIO 600V/4A MUR460 MUR460 D6-7 D18 D20
301-060-00 FAST DIO 400V/1A MUR140 MUR140 D11 D16
301-061-00 FAST DIO 400V/15A MUR1540 MUR1540 D2-3
301-062-00 DIO BRDG 400V/1A DF04M DF04M D9
302-002-00 DIO ZEN 1N5230B 4.7V 1N5230 D29 D31
302-026-00 DIO ZEN 1N4744A 15V 1W 1N4744 D1 D4-5 D8 D27 D33
302-030-00 DIO ZEN 1N4746A 18V 1W 1N4746 D21 D34
304-041-02 LED GRN T-1 TRANS W/TIE GRN D12 D14 D24 D26 D32 D36
310-001-02 TRANSISTOR NPN 2N3904 2N3904 Q7 Q12
310-018-00 XSTR NPN TIP122 TIP122 Q4
310-023-02 XSTR NPN 2SC2362K TR 2SC2362K Q20-23 Q25
310-032-02 TRANSISTOR PNP T&R 2SA1016K Q18-19 Q28-30
310-035-00 TRANSISTOR PNP 2SA1478 Q24 Q26-27
310-036-00 TRANSISTOR NPN 2SC3788 Q15-17
310-042-00 XSTR NPN MJ E15032 MJ E15032 Q14
310-043-00 XSTR PNP MJ E15033 MJ E15033 Q10
310-062-00 XSTR NPN 100V/25A TIP35C TIP35C Q8 Q13
11
PART NUMBER DESCRIPTION VALUE REFERENCE DESIGNATORS
310-063-00 XSTR PNP 100V/25A TIP36C TIP36C Q3 Q9
310-065-00 XSTR PNP TIP127 TIP127 Q5
310-066-00 XSTR MOSFET-N MTW32N20E MTW32N20E Q1-2
310-067-00 XSTR PNP SWITCH PNP 60V/ .2A 2N3906 Q6 Q11
310-068-00 PC 923 /SHARP, HIGH SPEED PC923 U1-2
PHOTOCOUPLER
400-078-00 HDR 10P .1X2 STR LCK SHRD J 4
400-129-00 FUSE CLIP .25 DIA PC MNT FC1-4
400-173-00 TERM .25 QKDS PCMT STABLE J 2-3
400-373-00 HDR 6P .084 DIA 11A J 1
450-269-00 PCB, SRS1500: AMP Z4
500-026-00 THERMOSTAT 67F070 PCMNT 67F070 TH1
510-028-00 FUSE SB 10A 3AB 1/4X1-1/4 10A F1-2
601-006-00 INDUCTOR AIR COIL 1UH 1uH 10% L3
601-031-00 INDUCTOR CZECH 5UH 50A SP 5uH/50A L1-2
12
PART NUMBER DESCRIPTION VALUE REFERENCE DESIGNATORS
120-081-00 RES MO .5W 5% 2K2 OHM 2K2 5% R72 R74
121-049-00 RES MO 1W 5% 10 OHM 10 OHM5% R96-97
130-037-02 POT RTY 10KC 9MM TN 10KC . R80
140-009-00 RES TF SM .1W 5% 2.2 OHM 2.2 5% R65 R69
140-049-00 RES TF SM .1W 5% 100 OHM 100 5% R28-29 R54-55 R71 R88
140-057-00 RES TF SM .1W 5% 220 OHM 220 5% R23-24 R49 R53 R79
140-065-00 RES TF SM .1W 5% 470 OHM 470 5% R89
140-073-00 RES TF SM .1W 5% 1K0 OHM 1K0 5% R3-4 R36-37 R87
140-077-00 RES TF SM .1W 5% 1K5 OHM 1K5 5% R94-95
140-081-00 RES TF SM .1W 5% 2K2 OHM 2K2 5% R75 R85 R90
140-083-00 RES TF SM .1W 5% 2K7 OHM 2K7 5% R83
140-089-00 RES TF SM .1W 5% 4K7 OHM 4K7 5% R5 R19 R60-61 R64 R76
140-090-00 RES TF SM .1W 5% 5K1 OHM 5K1 5% R70
140-091-00 RES TF SM .1W 5% 5K6 OHM 5K6 5% R68
140-093-00 RES TF SM .1W 5% 6K8 OHM 6K8 5% R12 R45
140-097-00 RES TF SM .1W 5% 10K OHM 10K 5% R20 R26 R46 R51 R66-67 R73
140-101-00 RES TF SM .1W 5% 15K OHM 15K 5% R11 R44
140-105-00 RES TF SM .1W 5% 22K OHM 22K 5% R18 R77-78
140-114-00 RES TF SM .1W 5% 47K OHM 47K 5% R1-2 R16-17 R30-35 R56-59 R93
140-123-00 RES TF SM .1W 5% 100K OHM 100K 5% R14-15 R84 R86
140-131-00 RES TF SM .1W 5% 220K OHM 220K 5% R63
140-135-00 RES TF SM .1W 5% 330K OHM 330K 5% R92
145-266-00 RES MF SM .1W 1% 576 OHM 576 1% R13 R91
145-326-00 RES MF SM .1W 1% 2K21 OHM 2K21 1% R21-22 R25 R27 R47-48 R50 R52 R81-82
145-367-00 RES MF SM .1W 1% 5K90 OHM 5K90 1% R9-10 R42-43
145-389-00 RES MF SM .1W 1% 10K0 OHM 10K0 1% R7-8 R40-41
200-022-02 PLY .47UF 5% 50V TR 0.47 10% C37
210-002-00 CER 100PF 10% 50V RAD 100PF 10% C35
212-001-00 CER .01UF 10% 50V X7R SM 0.01 10% C49
212-015-00 CER 33PF 5% 50V NPO SM 33PF 5% C5-7 C23-25 C39
212-018-00 CER 10PF 5% 50V NPO SM 10PF 5% C15-16 C28-29
212-020-00 CER 750PF 5% 50V NPO SM 750PF 5% C3-4 C21-22
212-024-00 CER 1UF 25V Y5V 1206 1UF +80/-20% C1-2 C10-11 C19-20
212-025-00 CAP CER .1UF 50V 10% X7R .1UF 10% C45-48
220-001-02 LYT 22UF 20% 25V RAD TR 22UF 10% C38 C43
220-002-02 LYT 47UF 20% 25V RAD TR 47UF 20% C17-18 C30-31
220-011-02 LYT 100UF 20% 25V RAD 100UF 10% C32 C34 C36 C40
220-012-02 LYT 4.7UF 20% 63V RAD TR 4.7UF 10% C33
224-010-00 PLY .1UF 2% 50V SM 0.1 2.00% C8-9 C12-13 C26-27 C42 C44
224-015-00 PLY .047UF 2% 50V SM 0.047 2.00% C14 C41
300-003-00 DIO SW DL4148 100V SM DL4148 D1-2 D5-6 D10 D12-14
302-002-03 DIO ZEN 1N5230B 4.7V SM DL5230B D16
302-013-03 DIO ZEN DL5242 12V SM DL5242B D3-4 D7-8
302-025-03 DIO ZEN DL5245B 15V SMT DL5245B D11
304-001-00 LED RED T-1 RED D15
304-004-00 LED GREEN T-1 GRN D9
310-005-02 TRANSISTOR J FET J 112 J 112 Q1-4 Q10
310-035-00 TRANSISTOR PNP 2SA1478 Q12
310-036-00 TRANSISTOR NPN 2SC3788 Q11
311-005-00 XSTR NPN MMBTA06 SMT IMBTA06 Q5 Q7-8
311-006-00 XSTR PNP IMBTA56 SMT IMBTA56 Q6 Q9
320-017-03 OPAMP NE5532 SMD NE5532 U1-7
329-012-00 VTL5C10 OPTOCOUPLER VTL5C10 U9
400-078-00 HDR 10P .1X2 STR LCK SHRD J 5
400-141-00 XLR 3P F VERT A-SERIES J 1 J 3
400-142-00 XLR 3P M VERT A-SERIES J 2 J 4 J 6-7
INPUT PCB ASSEMBLY 055-270-00 REV:A
13
PART NUMBER DESCRIPTION VALUE REFERENCE DESIGNATORS
040-135-00 CBL ASSY 18GA 1010 GRN/YEL 9" GRN/YEL P1
200-023-00 PLY/ BX .001UF 20% 250V Y2 .001uF 20% C1-2
200-024-00 PLY/ BX .01UF 20% 250V Y2 .01uF 20% C3
200-050-00 PLYBOX .47UF 20% 275V X2 .47 20% C4-5
400-060-00 FUSE CLIP PCMT 5MM DIA Z2-3
400-132-00 IEC MALE RTA PCMT J 1
400-173-00 TERM .25 QKDS PCMT STABLE J 2-7
450-271-00 PCB, SRS1500: AC INPUT Z1
712-020-00 BRKT ANG 6-32X.037THK STL BK1
712-021-01 RVT CL END .125X.062-.125 Z4-5
510-045-00 10 AMP, SLO BLO, 5 x 20mm F1 NOTE: Some early models have
7A fuses which should be
replaced with 10A.
AC INPUT PCB ASSEMBLY 055-271-00 Rev.A
PART NUMBER DESCRIPTION VALUE REFERENCE DESIGNATORS
400-243-00 HDR 2P .098X1 SHRD J 8
410-004-00 INSL SILPAD TO-126 Z103-104
450-270-00 PCB, SRS1500: INPUT Z100
500-024-00 SW SLIDE DPDT MINI DPDT SW1
550-573-00 HEATSINK 270 PCB SRS1500 HS1
700-087-00 TF 4-40X5/8 TORX 1/4 WASH Z101-102
706-095-00 SPCR PVC .905 T1 LED Z105-106
SRS1500 modification SSE August 2000
SRS1500 mod.pdf, page 1 of 1
SRS1500 a c tive sp e a ke r mod ific a tion
M od e ls a ffe c te d :
All SRS1500 120Volt and 100Volt active speakers. The 230Volt and 220Volt models are not affected.
Add this as part of your normal repair procedures.
Symp tom:
No power, no LED
Possib le C a use :
Blown AC fuse
Solution:
Increase the fuse size from 7 amps to 10 amps, to overcome the possibility of the fuse blowing under certain
turn-on and transient conditions.
Sa fe ty Wa rning :
Caution! These instructions are for use by qualified personnel only. To avoid electric shock, do not
perform any servicing unless you are qualified to do so. Refer all service to qualified personnel.
Tools Re q uire d :
Phillips screwdriver.
Pa rts Re q uire d :
Fuse 510-045-00 10 Amp, Slo Blo, 5 x 20mm
Fuse label 840-430-00
Proc e d ure :
1. Remove all cords (including the power cable and input cable) from the speaker.
2. Lay the speaker on its front on a soft carpet or surface.
3. Take off the amplifier panel assembly by removing the two screws along the rear edge of the top
of the speaker cabinet, and the two screws in the bottom. Take care to undo the LED wires and
the speaker connector before removing the amplifier panel.
4. Locate the AC input board and replace the fuse F1
with the new 10A fuse.
5. Add the fuse label over the silkscreen markings next
to the fuse.
6. Reconnect the speaker connector and the LED
connector.
7. Secure the amplifier panel back into the cabinet.
8. Reconnect the power cord and turn on the speaker.
9. Perform a complete specification and safety test
before returning the speaker to the customer.