Scribd Logo
Upload

Welcome to Scribd!

  • 71 views

    1639-U-005 - R05 Datasheet Latest Datasheet

    Uploaded by

    HEMANT
    This document provides technical specifications for various pumps used at a waste management facility, including: 1) Raw water pumps, domestic water transfer pumps, neutralized waste water pumps, cooling water pumps, and leachate transfer pumps. 2) Performance parameters like flow rates, head pressures, temperatures, speeds, and material specifications are provided. 3) Electrical requirements like power consumption, voltage, frequency are listed. Safety and design codes are also referenced. 4) Pump models, sizes, efficiencies, power requirements and weight details are to be provided by the supplier to meet the described operating conditions.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    1639-U-005 - R05 Datasheet Latest Datasheet

    Uploaded by

    HEMANT
    71 views4 pages
    This document provides technical specifications for various pumps used at a waste management facility, including: 1) Raw water pumps, domestic water transfer pumps, neutralized waste water pumps, cooling water pumps, and leachate transfer pumps. 2) Performance parameters like flow rates, head pressures, temperatures, speeds, and material specifications are provided. 3) Electrical requirements like power consumption, voltage, frequency are listed. Safety and design codes are also referenced. 4) Pump models, sizes, efficiencies, power requirements and weight details are to be provided by the supplier to meet the described operating conditions.

    Original Title

    1639-U-005- R05 Datasheet latest datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical specifications for various pumps used at a waste management facility, including: 1) Raw water pumps, domestic water transfer pumps, neutralized waste water pumps, cooling water pumps, and leachate transfer pumps. 2) Performance parameters like flow rates, head pressures, temperatures, speeds, and material specifications are provided. 3) Electrical requirements like power consumption, voltage, frequency are listed. Safety and design codes are also referenced. 4) Pump models, sizes, efficiencies, power requirements and weight details are to be provided by the supplier to meet the described operating conditions.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    71 views4 pages

    1639-U-005 - R05 Datasheet Latest Datasheet

    Uploaded by

    HEMANT
    This document provides technical specifications for various pumps used at a waste management facility, including: 1) Raw water pumps, domestic water transfer pumps, neutralized waste water pumps, cooling water pumps, and leachate transfer pumps. 2) Performance parameters like flow rates, head pressures, temperatures, speeds, and material specifications are provided. 3) Electrical requirements like power consumption, voltage, frequency are listed. Safety and design codes are also referenced. 4) Pump models, sizes, efficiencies, power requirements and weight details are to be provided by the supplier to meet the described operating conditions.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 4

    Korus Engineering Solutions Pvt. Ltd. Jindal Urban Waste Management (Guntur) Ltd.

    Annexure - I : TECHNICAL DATA SHEET FOR COOLING WATER CIRCULATING PUMPS & OTHER PUMPS (UPDATED FOR SUBMERSIBEL PUMP)

    Sl.No. Description Units


    DW Water Tranfer Leachate Transfer
    Raw Water Pumps N.Pit To LTP Pumps Cooling Water Pumps
    Pumps Pumps
    A General
    Submersible Sump Pump
    Horizontal Split Casing, with all accessories like
    Type Non Clog Self Priming Horizontal Pump Horizontal Back Pull Out Vertical Sump Pump
    Self Priming guide,chain,cable and
    panel
    Qty Nos. 1W+1S 1W+1S 1W+1S 1W+1S 1W+1S
    Type of flow Raw Water DW water Netulralised Waste Water Industrial water Leachate

    Flow m3/h 60 30 10 300 10


    Head (TDH) mWc 25 45 15 40 30
    Tempurature of Feed Water °C 40 32 40 40 40
    Suction Level mWc 3 meter suction lift (max.) Flooded Suction Flooded Suction Flooded Suction NA
    Speed RPM 1500 1500 1500 1500 1500
    Minimum Water Level M NA NA NA NA NA
    Maximum Water Level M NA NA 0 NA 0
    Pump/Motor Floor Level M 0 0 0 0 0
    Type of Impeller Non clog design Closed impeller Non clog design Closed Non clog design
    Suspended solids allowed up to 50 mm NA up to 50 mm NA up to 50 mm
    B Site Data
    Location Guntur (Andhra Pradesh) Guntur (Andhra Pradesh) Guntur (Andhra Pradesh) Guntur (Andhra Pradesh) Guntur (Andhra Pradesh)
    Plant elevation (above MSL) m ~60 ~60 ~60 ~60 ~60
    Seismic Zone Zone III As per IS:1893 Zone III As per IS:1893 Zone III As per IS:1893 Zone III As per IS:1893 Zone III As per IS:1893
    Ambient temperature
    For performance guarantee 0
    C 35 35 35 35 35
    For electrical design 0
    C 50 50 50 50 50
    Average high temperature 0
    C 43 43 43 43 43
    Average low temperature 0
    C 17 17 17 17 17
    C Pump Data (To Be Filled By Supplier)
    Model/Size
    Pump Type
    Design Fluid Temperature °C
    Rated Flow Cu.m/h
    Rated Head m
    NPSH required (at strainer inlet) m
    Efficiency
    BKW kw
    Range of Operation %
    Recommended Motor KW/ speed KW
    Impeller Diameter mm
    Pump shut off head m

    TS No 1639-U-005 R0 TECHNICAL DATA SHEET Page 1 of 4


    Annexure - I : TECHNICAL DATA SHEET FOR COOLING WATER CIRCULATING PUMPS & OTHER PUMPS (UPDATED FOR SUBMERSIBEL PUMP)

    Sl.No. Description
    Pressure drop across strainer at full flow Units
    condition and 50% clogged condition mWc
    Suction/Discharge Size mm
    D Electrical
    Power Consumption at rated parameters kW
    Motor Driver Rating kW
    Voltage V
    Frequency Hz
    Combined Variation %

    E Major codes
    Design
    Pumps IS-6595:1993-Part2 IS-6595:1993-Part2 IS-6595:1993-Part2
    Material
    Piping Components
    Electrical motors
    F Material
    Impeller A743 CF8M A743 CF8M A743 CF8M A743 CF8M Supplier to provide as per
    Suction casing Cast iron, Grade FG200 of IS 210 A743 CF8M Cast iron, Grade FG200 of Cast iron, Grade FG200 of suitability. Pump must be
    IS 210 IS 210 suitable for sewerage
    Discharge casing Cast iron, Grade FG200 of IS 210 A743 CF8M Cast iron, Grade FG200 of Cast iron, Grade FG200 of water quality
    IS 210 IS 210
    Shaft SS410 SS410 SS410 SS410
    Shaft Sleeve SS410 (H) SS410 (H) SS410 (H) SS410 (H)
    Base plate MS MS MS MS
    Flange & Counter Flanges ASME B16.5 Class 150 ASME B16.5 ASME B16.5 ASME B16.5
    G Equipment Weights
    Weight of Pump with Base Frame & Motor kg

    TS No 1639-U-005 R0 TECHNICAL DATA SHEET Page 2 of 4


    Korus Engineering Solutions Pvt. Ltd Jindal Urban Waste Management (Guntur) Ltd.

    Annexure - II : PERFORMANCE GUARANTEE - COOLING WATER CIRCULATING PUMPS P1 & P2


    Sl.No. Description Units Input Value by Korus Remarks
    Pump P1 for RO Pump P2 for DM Pump P3 for STP
    P4 for Drain Pit P5 for Leachate
    water water water
    1 Pump flow M3/hr
    2 Pump head MWC
    3 Efficiency of the pump %
    4 Power consumption KW

    TS No 1638-U-005 R0 Performance Table Page 3 of 4


    Korus Engineering Solutions Pvt. Ltd. Jindal Urban Waste Management (Guntur) Ltd.

    ANNEXURE - III : SCOPE MATRIX FOR COOLING WATER CIRCULATING PUMPS P1&P2
    ( S - Supplier, P- Purchaser )
    Supervision of
    Mfg. &
    Basic Detail erection &
    S. No. Description Supply / Remarks
    Engg. Engg. commissioning
    Services
    up to PG

    Pumps
    1 Pumps with complete assembly S S S S
    2 Drive motors for the pumps S S S S

    3 Coupling between Pump and Drive motor S S S S


    Base Frame (Common For Pump+Motor) with
    4 S S S S
    foundation bolts

    5 Matting flanges with fasteners at all terminal points S S S S

    6 Commissioning Spares S S S S

    7 Spares for 2 Years Operation S S S S

    8 Maintenance Tools & Tackles-1 set for all pumps S S S S


    9 Pressure gauges at suction and discharge S S S S

    TS No. 1639-U-005 R0 SCOPE MATRIX Page 4 of 4

    You might also like