Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    Isolated 48VDC/24VDC Converter

    Uploaded by

    OPENWIFI MIKROTIK
    This technical datasheet provides specifications for an isolated DC/DC converter that steps down 48VDC input to 24VDC output. The converter has a power rating of 312W, 93% efficiency, and protections such as overvoltage, undervoltage, overcurrent and overtemperature. It is intended for use in applications such as telecom equipment and off-highway vehicles to provide reliable isolated power conversion in harsh operating environments.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Isolated 48VDC/24VDC Converter

    Uploaded by

    OPENWIFI MIKROTIK
    49 views3 pages
    This technical datasheet provides specifications for an isolated DC/DC converter that steps down 48VDC input to 24VDC output. The converter has a power rating of 312W, 93% efficiency, and protections such as overvoltage, undervoltage, overcurrent and overtemperature. It is intended for use in applications such as telecom equipment and off-highway vehicles to provide reliable isolated power conversion in harsh operating environments.

    Original Description:

    Tda

    Original Title

    t Dax 081520

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This technical datasheet provides specifications for an isolated DC/DC converter that steps down 48VDC input to 24VDC output. The converter has a power rating of 312W, 93% efficiency, and protections such as overvoltage, undervoltage, overcurrent and overtemperature. It is intended for use in applications such as telecom equipment and off-highway vehicles to provide reliable isolated power conversion in harsh operating environments.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views3 pages

    Isolated 48VDC/24VDC Converter

    Uploaded by

    OPENWIFI MIKROTIK
    This technical datasheet provides specifications for an isolated DC/DC converter that steps down 48VDC input to 24VDC output. The converter has a power rating of 312W, 93% efficiency, and protections such as overvoltage, undervoltage, overcurrent and overtemperature. It is intended for use in applications such as telecom equipment and off-highway vehicles to provide reliable isolated power conversion in harsh operating environments.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    TECHNICAL DATASHEET #TDAX081520

    Isolated 48VDC/24VDC Converter


    48Vdc/24Vdc, 312W
    P/N: AX081520

    Power stepped down from 48Vdc to 24 Vdc for electronic control systems
    on vehicles, telecom equipment and in other harsh operating environments
    Features:
     48Vdc/24Vdc, 312 Watts
     Isolated
     Can connect to -48Vdc input
     Typical efficiency of 93%
     Input inrush current limit
     Thermal protection for over temperature
     Reverse battery, over and under-voltage
    protection
     Short circuit and overcurrent protection
     -40 to 85 °C (-40 to 185 °F) operating
     IP67
     EMI/EMC compliant
     CE marking
     1 TE Deutsch DTP13-4P connector
     Compact: 8.50 x 5.125 x 2.50 inches (215.90 x
    130.18 x 63.50 mm)
     Can be used in a current sharing configuration
     Redundancy for parallel application

    Applications: The DC/DC converter is suitable for application on charging/cranking battery


    based systems.
     Off-highway Equipment
     Telecom

    Ordering Part Numbers:


    48V/24V, Isolated DC/DC Converter P/N: AX081520

    Accessories:
    Mating Wire Harness, 2 m: AX070103
    or Mating Plug Kit: AX070117

    To purchase the DC/DC Converter and mating wire harness as a KIT (AX081520 converter,
    AX070103 wire harness), the ordering P/N is AX081520K.
    Technical Specifications:
    All specifications are typical at nominal input voltage and 25 degrees C unless otherwise specified.
    Input Specifications Output Specifications
    Power Source 48 Vdc nominal Nameplate Rating 312 VA nominal
    (Output Power)
    Operating Voltage Range 36 to 72 Vdc Output Current (DC) 13 A continuous
    Maximum Input Current 10ADC @ 36Vdc Output Voltage 24 Vdc  4%

    Reverse Voltage Protection Provided Output Voltage VO(RIPPLE) < 100 mVpp
    Ripple
    Under-voltage Shutdown 30 Vdc typical Turn-on time 900 ms typical
    (at full load)
    Over-voltage Shutdown 75 Vdc typical Stability Stable at all loads
    (no minimum load requirement)
    Transient Response 250 mV/2 ms
    (25%-75% Load)
    Short Circuit Current Protection provided
    Self-recovery
    16A current limit

    General Specifications
    Approvals CE marking
    Efficiency 93% Refer to Figure 1.0.
    Isolation 707 Vdc minimum
    Enclosure Cast Aluminum housing, integral gasket and connector
    8.14 x 5.83 x 2.50 inches (206.82 x 148.00 x 63.25 mm)
    L x W x H including integral connectors
    Refer to the dimensional drawing, Figure 2.0.
    Protection IP67
    Weight 4.20 lb. (1.9 kg)
    Vibration MIL-STD-202G, Test 204D and 214A (Sine and Random)
    10 g peak (Sine)
    7.86 Grms peak (Random)
    Shock MIL-STD-202G, Test 213B
    50g
    Temperature Rating Operating: -40 to 85C (-40 to 185F)
    Storage: -50 to 90C (-58 to 194F)
    Electrical Pinout Connector: 1 Deutsch IPD DTP13-4P
    Pin # Description
    1 Input +
    2 Input -
    3 Output -
    4 Output +

    For use with -48Vdc input, connect Input + to 0V and Input – to -48Vdc. The output will
    be +24V.

    A mating plug assembly, P/N: AX070117, is available and is comprised of Deutsch P/N:
    DTP06-4S, WP4S and four contact sockets 0462-203-12141.

    Alternatively, a mating wire harness is available as P/N: AX070103.


    It has the following wire colours and pin out.
    Pin# 1 Red Batt+
    Pin# 2 Black Batt-
    Pin# 3 White/Black Output-
    Pin# 4 White/Red Output+

    TDAX081520 2
    Efficiency (%) vs. Output Current (A)
    at 48Vdc Input
    94.00

    93.50

    93.00

    92.50

    92.00

    91.50

    91.00

    90.50
    0 2 4 6 8 10 12 14

    Figure 1.0 Efficiency vs. Output Current

    Figure 2. 0. – Dimensional Drawing

    Specifications are indicative and subject to change. Actual performance will vary depending on the application and
    operating conditions. Users should satisfy themselves that the product is suitable for use in the intended application. All our
    products carry a limited warranty against defects in material and workmanship. Please refer to our Warranty, Application
    Approvals/Limitations and Return Materials Process as described on www.axiomatic.com/service.html.

    Form: TDAX081520-08/13/18

    TDAX081520 3

    You might also like