®

DSEPower

DSE9460/9461 ENVIRONMENTAL TESTING STANDARDS

ELECTRO-MAGNETIC COMPATIBILITY
ENCLOSED INTELLIGENT BATTERY CHARGER BS EN 61000-6-2
EMC Generic Immunity Standard for
5 AMP & 10 AMP, 12 VOLT & 24 VOLT OPTIONS the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for
the Industrial Environment
FEATURES
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30 oC
The DSE94xx series of metal A comprehensive range of input and BS EN 60068-2-2
AVAILABLE 5 AMP VERSIONS Bb/Be Dry Heat +80 oC
enclosed intelligent battery chargers output protections ensures a
12v 5A (LCD)
* Refer to de-rating curve in the DSE9000

12v 5A (LCD & Meters)

have been developed with safety, continued safe charging 9460-01 Operator Manual

24v 5A (LCD)
9460-02
usability, optimised battery environment also enabling the use of
24v 5A (LCD & Meters)
9460-11 VIBRATION
performance and maximum battery the charger as a power supply. 9460-12 BS EN 60068-2-6
lifetimes in mind. Higher charging / power supply Ten sweeps in each of three
major axes
currents can be achieved by linking 5 Hz to 8 Hz at +/-7.5 mm,
The DSE94xx series can be used together multiple chargers from this 8 Hz to 500 Hz at 2 gn
directly from the box, relying on a series. AVAILABLE 10 AMP VERSIONS
HUMIDITY
12v 10A (LCD)
preconfigured lead/acid charging BS EN 60068-2-30
12v 10A (LCD & Meters)
9461-01
curve and selected manually for The chargers can be integrated into Db Damp Heat Cyclic 20/55 oC
12v 10A (LED & Meters)
9461-02
at 95% RH 48 Hours
12v 10A (LED)
either 12V or 24V operation an external system through modbus 9461-03 BS EN 60068-2-78
24v 10A (LCD)
(including a voltage trimming RTU using RS485 as well as an 9461-04 Cab Damp Heat Static 40 oC
24v 10A (LCD & Meters)
9461-11 at 93% RH 48 Hours
potentiometer function). Alternatively optional external remote LCD
24v 10A (LED & Meters)
9461-12

24v 10A (LED)

they can be connected via a USB to display being available. 9461-13 SHOCK
a PC (using the free DSE PC 9461-14 BS EN 60068-2-27
Three shocks in each of three major axes
configuration suite software) and can 15 gn in 11 mS
be configured with pre set charging
curves for different battery types.
The user also has the option of
configuring their own bespoke
charging curve for advanced battery
applications.

COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OF

BATTERY CHARGER APPLICATIONS
PC MODBUS/DSE2541 DISPLAY DSE2541

1ph
12V
N

CHARGE OUTPUT USB PORT RS485 AUXILIARY DC OUTPUT AC POWER SUPPLY

DSE9460/DSE9461
7

OTHER

TEMPERATURE SENSOR CHANGE OVER VOLTS FREE FAULT CONFIGURABLE INPUT

RELAY

PT1000 ONLY

1 1

ISSUE 1
 ®

DSEPower

DSE9460/9461 SPECIFICATION

AC SUPPLY

ENCLOSED INTELLIGENT BATTERY CHARGER VOLTAGE RANGE

90 V to 305 V (L-N)
5 AMP & 10 AMP, 12 VOLT & 24 VOLT OPTIONS FREQUENCY RANGE
48 Hz to 64 Hz (L-N)

DC OUTPUT RATING
DSE9460 OUTPUT
FEATURES 5 A DC at 12 V & 24 V DC

DSE9461 OUTPUT
10 A DC at 12 V & 24 V DC

RIPPLE AND NOISE

ADVANCED FEATURES <1%
• Intelligent two, three and four stage charging EFFICIENCY
profiles >86%
• Configurable to suit most battery types
AUXILIARY OUTPUT
(12V/24V) 100 mA DC at 12 V
• Adjustable current limit
• Can be used as a battery charger, power supply REGULATION
LINE
or both at the same time <0.5%
• Automatic or Manual boost and storage charge
functions to help maintain battery condition LOAD
2%
• Digital Microprocessor Technology
• Temperature compensation for battery charging TEMPERATURE SENSOR INPUT
• Low Output Ripple and superb line regulation PT1000

• Available in two variants (LCD display or LCD PROTECTIONS

display & analogue meters) Short Circuit
DC Over Voltage
Full Protection DC Over Current
• AC input Under voltage Reverse Polarity
• AC input Over voltage Over Temperature
AC Under & Over Voltage
• Battery charger output Over voltage Battery Charger Failure
• Battery charger output Over current
• Battery temperature compensation with over CHARGE FAILURE RELAY
3 A at 30 V DC volt free relay
temperature protection
• Output short circuit and Inversion polarity with DIMENSIONS
auto recovery OVERALL
165 mm x 305 mm x 110 mm
• Automatic power de-rating at high ambient 6.5” x 12” x 4.3”
temperatures
• Battery charger failure indication WEIGHT
KEY BENEFITS 2.3 kg
Automatic Boost Mode
• Boosts and equalises cell charge improving • Fully flexible to maximise the life of the battery OPERATING TEMPERATURE RANGE
• Suitable for a wide range of battery types -30 oC to +55 oC
battery performance and life
• Switched mode design
Power Save Mode STORAGE TEMPERATURE RANGE
• Fault output -40 oC to +85 oC
• Once the battery is fully charged the chargers
• Minimum 86% efficiency throughout full
switch to Eco-Power to save energy
operating range
Communication • No external intervention for boost mode
• Can be integrated into external systems through • Multiple chargers can be linked together to
MODBUS RTU using RS485 provide larger current output
• Fully configurable via DSE Configuration Suite • Can be permanently connected to battery and
PC Software mains (utility) supply. No need to disconnect
• External remote LCD option through high load conditions.

RELATED MATERIALS
TITLE PART NO’S
DSE9000 Configuration Suite PC Software Manual 057-159
DSE Configuration Suite Installation & Operator Manual 057-151
DSE9460/DSE9461 Series Installation Instructions 053-148
DSE9460/DSE9461 Series Operator Manual 057-176
DSE2541 Data Sheet 055-160
DSE2541 Installation Instructions 053-154

DEEP SEA ELECTRONICS PLC UK DEEP SEA ELECTRONICS INC USA

Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH 3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708
EMAIL [email protected] WEBSITE www.deepseaplc.com EMAIL [email protected] WEBSITE www.deepseausa.com

Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-153/11/12 US (4)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457