PSL Catalogue

EASISLIDE LOW FRICTION BEARINGS
WHAT SLIDE BEARINGS DO

When structures get hot, they expand and this
expansion has to be accommodated within the design of
the structure.
For example, bridges and buildings expand and contract
as a result of changes in ambient temperature and
pipelines expand or contract when the temperature of
the fluid they are transporting changes.
Failure to allow such items to expand can produce in
them unacceptably high stresses and may also overload
the equipment or structure to which they are attached.

An extremely effective way of accommodating such
expansion is to allow one item to move in relation to
another and this can easily be achieved by using slide
bearings to separate the expanding item from the
supporting structure.
However, it is important that the bearing is designed so
that the frictional force between the item and the
structure is kept to a minimum, to prevent the
development of high loads and stresses.
Slide Bearings in use on 1.5 miles of

pipework feeding water to the Cym
Dyli HEP Station, Gwynedd.
Mirror finish stainless

steel upper face and
PTFE lower face both
attached to carbon
steel backing plates
WHY USE EASISLIDE BEARINGS?

They incorporate PTFE which has a coefficient
of friction lower than any other solid material.
Can tolerate some embedment of small particles

in the bearing pad without causing failure.
The bearings are designed to achieve optimum

performance, by careful specification of the
bearing pad dimensions to achieve the ideal
compressive stress.
Compact design which means they often fit

into areas unsuitable for other types of bearing.
Capable of operating completely dry, they

require no lubrication.
Able to withstand a wide range of
environmental conditions operating at
temperatures from minus 200oC to plus 150oC
and are resistant to a wide range of organic and
inorganic chemicals.
Designed for easy on-site installation.
10
Long and maintenance free life.

Already operating successfully in a wide range
of installations worldwide.
11
135
THERES A EASISLIDE BEARING PRECISELY RIGHT FOR ANY JOB

THE RIGHT MATERIALS
THE RIGHT CONDITIONS
The EASISLIDE standard range of slide bearings uses a PTFE

pad (or pads) counterfaced by a larger polished stainless
steel plate the PTFE is bonded to a carbon steel backing
plate for attachment to existing steelwork either by means
of countersunk bolts or by welding. The stainless steel pad is
similarly attached to a carbon steel backing plate. For
corrosive environments, units can be supplied manufactured
entirely in stainless steel with a PTFE slider pad.
Alternatively, other combinations of material, such as PTFE
on PTFE or neoprene-backed PTFE may be specified.
Different slider materials such as bronze based assemblies
are also available.
PTFE is suitable for continuous operation at temperatures

up to 150oC at greater temperatures load bearing
thermal insulation material can be used to reduce the
temperature of the bearing. Where vibration is likely to
occur, anti-vibration pads can easily be incorporated into
slide bearing designs.
THERMAL
INSULATION
MATERIAL
STAINLESS
STEEL
PTFE
CARBON
STEEL
Coefficient of Friction
0.2
SELECTING THE RIGHT EASISLIDE

BEARING
0.1
Decide the style of bearing required and check that the

imposed load is within the recommended operating load
range of the bearing assembly.
The standard bearing may be used at loadings below

the recommended minimum, but an increased
coefficient of friction will result.
For loadings in excess of the recommended maximum,

please state the load capacity required, and we will
design an assembly to suit.
Select the appropriate axial and lateral movement

ranges to accommodate the maximum anticipated
movements.
Where the bearing gives a choice of height dimensions,

these should be specified.
If no standard EASISLIDE bearing suits your application,

please contact our design service with your
requirements.
Glass Filled PTFE
Virgin PTFE
0
10
12
14
16
18
20
22
Bearing Pressure (N/mm2)
THE RIGHT BEARING SIZE

In determining the size of the PTFE bearing pad the applied
loading and eventual operating temperature has to be
taken into consideration.
PTFE performs less well at very low bearing pressures and
at normal ambient temperatures a maximum bearing
pressure of 60 kgf/cm2 is recommended.
It is therefore imperative that the load acting upon the
bearing is specified at the outset to enable accurate
calculation of the bearing pad size.
If stability is a consideration, the PTFE can be arranged in
strips and if space constraint necessitates a higher
bearing pressure, glass-filled PTFE can be used.
The size of the stainless steel counterfacing plate must be
greater that the PTFE pad by an amount equal to the total
anticipated movement with an allowance for over-travel.
It is important that all of the PTFE pad remains in contact
with the stainless steel counterfacing plate at all times.
Bearing Pressure (N/mm2)
ES01 to ES07DS
The numbering system for the standard range of EASISLIDE
bearings enables all design parameters to be specified by
the part number.
For example, part number
ES01 200 NB-L2 A1-X = 180
is easily broken down to indicate the following:
ES01
200 NB
L2
A1
X = 180
20
15
10
the style of the bearing.

to suit pipe nominal bore.
Lateral movement range see tabulation.
Axial movement range see tabulation.
Height dimension see diagram.
Where a particular parameter is not applicable, it is omitted,

as in, for example: ES04 350 NB-A2-X = 300.
Glass Filled PTFE
THE RIGHT DESIGN
Virgin PTFE
2
-50
50
-25
0
25
50
50
75
100 125
100 150
200 250
Temperature
136
THE RIGHT PART NUMBER
150
300
175 200 225 250

350 400 450 F
EASISLIDE bearings are designed and produced by Pipe

Supports Group.
Whether you need a bearing for a larger load or movement
than those covered by our standard range, or even to a
totally different style, our experienced team can design a
slide bearing to meet your needs exactly.
So whatever your slide bearing requirements, call Pipe
Supports Group and ask for EASISLIDE, theyre precisely
right for any job!
TYPES OF LEG ES01

TO ES05
ES07/ES07DS
The ES07 PTFE/Stainless Steel slide
bearing is suitable for a wide range of
sliding applications. If stability of the
supported item is a consideration, a
number of ES07 bearings may be used.
Alternatively, larger bearings with split
PTFE pads can be designed and made
to suit particular requirements. The
standard bearing thickness (C) should
be suitable for most applications.
Alternative thicknesses can be supplied
ES07
to order. Care should be taken if

reducing C that the attached
structure has sufficient local strength.
The standard bearing is designed for
attachment by welding. Bearings for
attachment by bolting can also by
supplied. ES07DS slide bearing design
incorporates a dust seal for use where
significant amounts of dust or other
contaminants are present.
15NB 150NB
POLISHED
STAINLESS
STEEL
Bonded PTFE
SIZE
RECOMMENDED
LOADING AT
25C (kgf)
A (Sq.)
mm
C
mm
250
500
1000
2000
4000
8000
16000
32000
64000
100 TO 250
200 TO 500
400 TO 1000
800 TO 2000
1600 TO 4000
3200 TO 8000
6400 TO 16000
12800 TO 32000
25600 TO 64000
40
55
70
100
125
180
230
300
400
15
21
25
29
35
45
55
55
55
B mm
MOVEMENT
RANGE 1 RANGE 2 RANGE 3
65
75
85
105
125
165
205
275
375
90
100
110
130
150
190
230
300
400
115
125
135
155
175
215
255
325
425
175NB 400NB
ES07DS
POLISHED
STAINLESS
STEEL
A
DUST
SEAL
Bonded PTFE
RECOMMENDED
LOADING AT
25C (kgf)
A (Sq.)
mm
C
mm
250
100 TO 250
60
15
85
110
500
200 TO 500
75
21
95
120
145
1000
400 TO 1000
90
25
105
130
155
2000
800 TO 2000
120
29
125
150
175
4000
1600 TO 4000
145
35
145
170
195
235
135
8000
3200 TO 8000
200
45
185
210
16000
6400 TO 16000
260
55
235
260
285
32000
64000
12800 TO 32000
25600 TO 64000
330
430
55
55
305
405
330
430
355
455
RANGE 1 = +/-12.5 mm MOVEMENT

RANGE 2 = +/-25 mm MOVEMENT
RANGE 3 = +/-37.5 mm MOVEMENT
BOTTOM PLATE IS SQUARE.
TOP PLATE MAY BE SQUARE OR
RECTANGULAR DEPENDING UPON
REQUIRED MOVEMENT IN COORDINATE DIRECTIONS.
B mm
MOVEMENT
RANGE 1 RANGE 2 RANGE 3
SIZE
450NB 1000NB
10
FOR SIZE 16000 AND ABOVE,

PARTICULAR CARE SHOULD BE
TAKEN TO ENSURE THAT THE SLIDE
BEARINGS ARE MOUNTED ON A
BACKING STRUCTURE OF ADEQUATE
STRENGTH.
11
TYPICAL SELECTION:
ES07-8000 RANGE 2 X RANGE 2.
137
ES01
x
STAINLESS STEEL
PTFE
E
F
C
D
LATERAL MOVEMENT
LATERAL MOVEMENT
RANGE L1
RANGE L2
MOVT
MOVT
RANGE
C
D
RANGE
C
D
mm
mm
mm
mm
mm
mm
AXIAL MOVEMENT
RANGE A1
RANGE A2
MOVT
MOVT
RANGE
E
F
RANGE
E
F
mm
mm
mm
mm
mm
mm
OPERATING
LOAD
PIPE
PIPE
NB
mm
O/D
mm
Min
mm
Max
mm
15
21.3
35
120
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
96
100
300
20
26.7
35
125
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
100
100
300
25
33.4
40
125
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
106
100
300
32
42.2
45
130
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
126
100
300
40
48.3
50
135
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
132
100
300
50
60.3
55
140
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
142
100
300
65
73.0
70
150
0-25
70
89
25-50
70
127
0-25
70
150
25-50
70
200
204
200
600
80
88.9
75
160
0-25
70
89
25-50
70
127
0-25
70
150
25-50
70
200
214
200
600
100
114.3
90
170
0-25
70
89
25-50
70
127
0-25
70
150
25-50
70
200
238
200
600
125
141.3
105
180
0-25
70
89
25-50
70
127
0-25
70
150
25-50
70
200
264
200
600
150
168.3
120
195
0-25
70
89
25-50
70
127
0-25
70
150
25-50
70
200
294
200
600
175
193.7
135
260
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
318
500
1500
200
219.1
150
275
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
344
500
1500
225
244.5
160
285
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
368
500
1500
250
273.0
175
300
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
398
500
1500
300
323.9
205
330
0-50
140
150
50-100
140
200
0-50
140
300
50-100
140
300
480
1000
3000
350
355.6
220
345
0-50
140
150
50-100
140
200
0-50
140
300
50-100
140
300
532
1000
3000
400
406.4
250
370
0-50
140
150
50-100
140
200
0-50
140
300
50-100
140
300
608
1000
3000
450
457.2
290
400
0-50
200
250
50-100
200
250
0-50
200
345
50-100
200
345
716
2500
7500
500
508.0
315
425
0-50
200
250
50-100
200
250
0-50
200
345
50-100
200
345
766
2500
7500
550
558.8
340
450
0-50
200
250
50-100
200
250
0-50
200
345
50-100
200
345
816
2500
7500
600
609.6
365
480
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
870
2500
7500
650
660.4
390
500
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
920
2500
7500
700
711.2
415
530
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
970
2500
7500
750
762.0
445
550
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
1020
2500
7500
800
812.8
470
580
0-50
200
250
50-100
200
250
0-50
200
370
50-100
200
370
1110
2500
7500
850
863.6
495
600
0-50
200
250
50-100
200
250
0-50
200
370
50-100
200
370
1160
2500
7500
900
914.4
520
630
0-50
200
250
50-100
200
250
0-50
200
370
50-100
200
370
1210
2500
7500
1000
1016
575
680
0-50
200
250
50-100
200
250
0-50
200
380
50-100
200
380
1358
2500
7500
138
AXIAL MOVEMENT
B
mm
Min
kgf
Max
kgf
ES02
x
STAINLESS STEEL
PTFE
E
F
AXIAL MOVEMENT
C
D
B
LATERAL MOVEMENT
LATERAL MOVEMENT
RANGE L1
RANGE L2
MOVT
MOVT
RANGE
C
D
RANGE
C
D
mm
mm
mm
mm
mm
mm
AXIAL MOVEMENT
RANGE A1
RANGE A2
MOVT
MOVT
RANGE
E
F
RANGE
E
F
mm
mm
mm
mm
mm
mm
OPERATING
LOAD
PIPE
PIPE
NB
mm
O/D
mm
Min
mm
Max
mm
15
21.3
35
120
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
96
100
300
20
26.7
35
125
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
100
100
300
25
33.4
40
125
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
106
100
300
32
42.2
45
130
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
126
100
300
40
48.3
50
135
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
132
100
300
50
60.3
55
140
0-25
55
76
25-50
55
102
0-25
55
100
25-50
55
130
142
100
300
65
73.0
70
150
0-25
70
89
25-50
70
127
0-25
70
150
25-50
70
200
204
200
600
B
mm
Min
kgf
Max
kgf
80
88.9
75
160
0-25
70
89
25-50
70
127
0-25
70
150
25-50
70
200
214
200
600
100
114.3
90
170
0-25
70
89
25-50
70
127
0-25
70
150
25-50
70
200
238
200
600
125
141.3
105
180
0-25
70
89
25-50
70
127
0-25
70
150
25-50
70
200
264
200
600
150
168.3
120
195
0-25
70
89
25-50
70
127
0-25
70
150
25-50
70
200
294
200
600
175
193.7
135
260
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
318
500
1500
200
219.1
150
275
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
344
500
1500
225
244.5
160
285
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
368
500
1500
250
273.0
175
300
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
398
500
1500
300
323.9
205
330
0-50
140
150
50-100
140
200
0-50
140
300
50-100
140
300
480
1000
3000
350
355.6
220
345
0-50
140
150
50-100
140
200
0-50
140
300
50-100
140
300
532
1000
3000
400
406.4
250
370
0-50
140
150
50-100
140
200
0-50
140
300
50-100
140
300
608
1000
3000
450
457.2
290
400
0-50
200
250
50-100
200
250
0-50
200
345
50-100
200
345
716
2500
7500
500
508.0
315
425
0-50
200
250
50-100
200
250
0-50
200
345
50-100
200
345
766
2500
7500
550
558.8
340
450
0-50
200
250
50-100
200
250
0-50
200
345
50-100
200
345
816
2500
7500
600
609.6
365
480
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
870
2500
7500
650
660.4
390
500
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
920
2500
7500
700
711.2
415
530
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
970
2500
7500
750
762.0
445
550
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
1020
2500
7500
800
812.8
470
580
0-50
200
250
50-100
200
250
0-50
200
370
50-100
200
370
1110
2500
7500
850
863.6
495
600
0-50
200
250
50-100
200
250
0-50
200
370
50-100
200
370
1160
2500
7500
900
914.4
520
630
0-50
200
250
50-100
200
250
0-50
200
370
50-100
200
370
1210
2500
7500
1000
1016
575
680
0-50
200
250
50-100
200
250
0-50
200
380
50-100
200
380
1358
2500
7500
10
11
139
ES03
STAINLESS STEEL
PTFE
E
F
AXIAL MOVEMENT
D
C
AXIAL MOVEMENT
X
RANGE A1
OPERATING
LOAD
PIPE
PIPE
RANGE A2
NB
mm
O/D
mm
Min
mm
Max
mm
C
mm
D
mm
MOVT
RANGE
mm
E
mm
F
mm
MOVT
RANGE
mm
E
mm
F
mm
15
21.3
55
120
55
76
0-25
55
100
25-50
55
20
26.7
60
125
55
76
0-25
55
100
25-50
55
25
33.4
60
125
55
76
0-25
55
100
25-50
32
42.2
70
130
55
76
0-25
55
100
40
48.3
70
135
55
76
0-25
55
50
60.3
75
140
55
76
0-25
65
73.0
105
150
70
89
0-25
B
mm
Min
kgf
Max
kgf
130
96
100
300
130
100
100
300
55
130
106
100
300
25-50
55
130
126
100
300
100
25-50
55
130
132
100
300
55
100
25-50
55
130
142
100
300
70
150
25-50
70
200
204
200
600
80
88.9
110
160
70
89
0-25
70
150
25-50
70
200
214
200
600
100
114.3
115
170
70
89
0-25
70
150
25-50
70
200
238
200
600
125
141.3
125
180
70
89
0-25
70
150
25-50
70
200
264
200
600
150
168.3
135
195
70
89
0-25
70
150
25-50
70
200
294
200
600
175
193.7
145
260
100
102
0-25
100
200
25-50
100
200
318
500
1500
200
219.1
155
275
100
102
0-25
100
200
25-50
100
200
344
500
1500
225
244.5
160
285
100
102
0-25
100
200
25-50
100
200
368
500
1500
250
273.0
175
300
100
102
0-25
100
200
25-50
100
200
398
500
1500
300
323.9
205
330
140
150
0-50
140
300
50-100
140
300
480
1000
3000
350
355.6
220
345
140
150
0-50
140
300
50-100
140
300
532
1000
3000
400
406.4
250
370
140
150
0-50
140
300
50-100
140
300
608
1000
3000
450
457.2
290
400
200
250
0-50
200
345
50-100
200
345
716
2500
7500
500
508.0
315
425
200
250
0-50
200
345
50-100
200
345
766
2500
7500
550
558.8
340
450
200
250
0-50
200
345
50-100
200
345
816
2500
7500
600
609.6
365
480
200
250
0-50
200
360
50-100
200
360
870
2500
7500
650
660.4
390
500
200
250
0-50
200
360
50-100
200
360
920
2500
7500
700
711.2
415
530
200
250
0-50
200
360
50-100
200
360
970
2500
7500
750
762.0
445
550
200
250
0-50
200
360
50-100
200
360
1020
2500
7500
800
812.8
470
580
200
250
0-50
200
370
50-100
200
370
1110
2500
7500
850
863.6
495
600
200
250
0-50
200
370
50-100
200
370
1160
2500
7500
900
914.4
520
630
200
250
0-50
200
370
50-100
200
370
1210
2500
7500
1000
1016
575
680
200
250
0-50
200
380
50-100
200
380
1358
2500
7500
140
ES04
STAINLESS STEEL
PTFE
E
F
AXIAL MOVEMENT
D
C
AXIAL MOVEMENT
X
RANGE A1
OPERATING
LOAD
PIPE
PIPE
RANGE A2
NB
mm
O/D
mm
Min
mm
Max
mm
C
mm
D
mm
MOVT
RANGE
mm
E
mm
F
mm
MOVT
RANGE
mm
E
mm
F
mm
15
21.3
55
120
55
76
0-25
55
100
25-50
55
20
26.7
60
125
55
76
0-25
55
100
25-50
55
25
33.4
60
125
55
76
0-25
55
100
25-50
32
42.2
70
130
55
76
0-25
55
100
40
48.3
70
135
55
76
0-25
55
50
60.3
75
140
55
76
0-25
65
73.0
105
150
70
89
0-25
B
mm
Min
kgf
Max
kgf
130
96
100
300
130
100
100
300
55
130
106
100
300
25-50
55
130
126
100
300
100
25-50
55
130
132
100
300
55
100
25-50
55
130
142
100
300
70
150
25-50
70
200
204
200
600
80
88.9
110
160
70
89
0-25
70
150
25-50
70
200
214
200
600
100
114.3
115
170
70
89
0-25
70
150
25-50
70
200
238
200
600
125
141.3
125
180
70
89
0-25
70
150
25-50
70
200
264
200
600
150
168.3
135
195
70
89
0-25
70
150
25-50
70
200
294
200
600
175
193.7
145
260
100
102
0-25
100
200
25-50
100
200
318
500
1500
200
219.1
155
275
100
102
0-25
100
200
25-50
100
200
344
500
1500
225
244.5
160
285
100
102
0-25
100
200
25-50
100
200
368
500
1500
250
273.0
175
300
100
102
0-25
100
200
25-50
100
200
398
500
1500
300
323.9
205
330
140
150
0-50
140
300
50-100
140
300
480
1000
3000
350
355.6
220
345
140
150
0-50
140
300
50-100
140
300
532
1000
3000
400
406.4
250
370
140
150
0-50
140
300
50-100
140
300
608
1000
3000
450
457.2
290
400
200
250
0-50
200
345
50-100
200
345
716
2500
7500
500
508.0
315
425
200
250
0-50
200
345
50-100
200
345
766
2500
7500
550
558.8
340
450
200
250
0-50
200
345
50-100
200
345
816
2500
7500
600
609.6
365
480
200
250
0-50
200
360
50-100
200
360
870
2500
7500
650
660.4
390
500
200
250
0-50
200
360
50-100
200
360
920
2500
7500
700
711.2
415
530
200
250
0-50
200
360
50-100
200
360
970
2500
7500
750
762.0
445
550
200
250
0-50
200
360
50-100
200
360
1020
2500
7500
800
812.8
470
580
200
250
0-50
200
370
50-100
200
370
1110
2500
7500
850
863.6
495
600
200
250
0-50
200
370
50-100
200
370
1160
2500
7500
900
914.4
520
630
200
250
0-50
200
370
50-100
200
370
1210
2500
7500
1000
1016
575
680
200
250
0-50
200
380
50-100
200
380
1358
2500
7500
10
11
141
ES05
F
AXIAL MOVEMENT
LATERAL MOVEMENT
LATERAL MOVEMENT
RANGE L1
RANGE L2
MOVT
MOVT
RANGE
C
D
RANGE
C
D
mm
mm
mm
mm
mm
mm
RANGE A1
MOVT
RANGE
E
mm
mm
AXIAL MOVEMENT
RANGE A2
MOVT
F
RANGE
E
mm
mm
mm
PIPE
PIPE
NB
mm
O/D
mm
Min
mm
Max
mm
15
21.3
35
120
0-25
55
76
25-50
55
102
0-25
55
100
25-50
20
26.7
35
125
0-25
55
76
25-50
55
102
0-25
55
100
25-50
25
33.4
40
125
0-25
55
76
25-50
55
102
0-25
55
100
32
42.2
45
130
0-25
55
76
25-50
55
102
0-25
55
40
48.3
50
135
0-25
55
76
25-50
55
102
0-25
50
60.3
55
140
0-25
55
76
25-50
55
102
65
73.0
70
150
0-25
70
89
25-50
70
80
88.9
75
160
0-25
70
89
25-50
100
114.3
90
170
0-25
70
89
125
141.3
105
180
0-25
70
150
168.3
120
195
0-25
70
175
193.7
135
260
0-25
200
219.1
150
275
225
244.5
160
285
250
273.0
175
300
323.9
350
400
OPERATING
LOAD
F
mm
Min
kgf
Max
kgf
55
130
100
300
55
130
100
300
25-50
55
130
100
300
100
25-50
55
130
100
300
55
100
25-50
55
130
100
300
0-25
55
100
25-50
55
130
100
300
127
0-25
70
150
25-50
70
200
200
600
70
127
0-25
70
150
25-50
70
200
200
600
25-50
70
127
0-25
70
150
25-50
70
200
200
600
89
25-50
70
127
0-25
70
150
25-50
70
200
200
600
89
25-50
70
127
0-25
70
150
25-50
70
200
200
600
100
102
25-50
100
127
0-25
100
200
25-50
100
200
500
1500
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
500
1500
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
500
1500
300
0-25
100
102
25-50
100
127
0-25
100
200
25-50
100
200
500
1500
205
330
0-50
140
150
50-100
140
200
0-50
140
300
50-100
140
300
1000
3000
355.6
220
345
0-50
140
150
50-100
140
200
0-50
140
300
50-100
140
300
1000
3000
406.4
250
370
0-50
140
150
50-100
140
200
0-50
140
300
50-100
140
300
1000
3000
450
457.2
290
400
0-50
200
250
50-100
200
250
0-50
200
345
50-100
200
345
2500
7500
500
508.0
315
425
0-50
200
250
50-100
200
250
0-50
200
345
50-100
200
345
2500
7500
550
558.8
340
450
0-50
200
250
50-100
200
250
0-50
200
345
50-100
200
345
2500
7500
600
609.6
365
480
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
2500
7500
650
660.4
390
500
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
2500
7500
700
711.2
415
530
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
2500
7500
750
762.0
445
550
0-50
200
250
50-100
200
250
0-50
200
360
50-100
200
360
2500
7500
800
812.8
470
580
0-50
200
250
50-100
200
250
0-50
200
370
50-100
200
370
2500
7500
850
863.6
495
600
0-50
200
250
50-100
200
250
0-50
200
370
50-100
200
370
2500
7500
900
914.4
520
630
0-50
200
250
50-100
200
250
0-50
200
370
50-100
200
370
2500
7500
1000
1016
575
680
0-50
200
250
50-100
200
250
0-50
200
380
50-100
200
380
2500
7500
142
ES06
LATERAL MOVEMENT
AXIAL MOVEMENT
LATERAL MOVEMENT
RANGE L1
RANGE L2
MOVT
MOVT
RANGE
C
D
RANGE
C
D
mm
mm
mm
mm
mm
mm
RANGE A1
MOVT
RANGE
E
mm
mm
AXIAL MOVEMENT
RANGE A2
MOVT
F
RANGE
E
mm
mm
mm
PIPE
PIPE
NB
mm
O/D
mm
Min
mm
Max
mm
300
323.9
205
335
0-50
250
260
50-100
300
360
0-50
120
300
50-100
350
355.6
220
350
0-50
250
260
50-100
300
360
0-50
120
300
50-100
400
406.4
250
380
0-50
300
300
50-100
350
400
0-50
180
300
450
457.2
280
405
0-50
300
300
50-100
350
400
0-50
180
500
508.0
305
430
0-50
300
300
50-100
350
400
0-50
550
558.8
330
455
0-50
300
300
50-100
350
400
0-50
600
609.6
335
480
0-50
330
330
50-100
380
430
650
660.4
355
505
0-50
330
330
50-100
380
700
711.2
405
530
0-50
330
330
50-100
380
750
762.0
435
560
0-50
400
400
50-100
800
812.8
460
590
0-50
400
400
850
863.6
485
615
0-50
400
400
900
914.4
510
640
0-50
400
1000
1016
560
690
0-50
400
OPERATING
LOAD
F
mm
Min
kgf
Max
kgf
120
300
1500
4500
120
300
1500
4500
50-100
180
350
1500
4500
300
50-100
180
350
3300
10000
180
300
50-100
180
350
3300
10000
180
300
50-100
180
350
3300
10000
0-50
180
300
50-100
180
350
3300
10000
430
0-50
180
350
50-100
180
350
3300
10000
430
0-50
180
350
50-100
180
350
3300
10000
450
500
0-50
200
400
50-100
200
400
3300
10000
50-100
450
500
0-50
200
400
50-100
200
400
3300
10000
50-100
450
500
0-50
200
400
50-100
200
400
3300
10000
400
50-100
450
500
0-500
200
400
50-100
200
400
3300
10000
400
50-100
450
500
0-50
200
400
50-100
200
400
3300
10000
10
11
143
Easislide PTFE Slide

Bearings with load
bearing insulation
to allow movement
of CroMo alloy
shoes at 510 C
Large multiple
pad bearings on
exhaust
chimneys at
Teesside P.S.
144

PSL Catalogue

Uploaded by

Copyright:

Available Formats

PSL Catalogue

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PSL Catalogue

Uploaded by

Copyright:

Available Formats

EASISLIDE LOW FRICTION BEARINGS

WHAT SLIDE BEARINGS DO

the equipment or structure to which they are attached.

Slide Bearings in use on 1.5 miles of

Mirror finish stainless

WHY USE EASISLIDE BEARINGS?

Can tolerate some embedment of small particles

The bearings are designed to achieve optimum

Compact design which means they often fit

Capable of operating completely dry, they

Designed for easy on-site installation.

Long and maintenance free life.

THERES A EASISLIDE BEARING PRECISELY RIGHT FOR ANY JOB

THE RIGHT CONDITIONS

The EASISLIDE standard range of slide bearings uses a PTFE

PTFE is suitable for continuous operation at temperatures

SELECTING THE RIGHT EASISLIDE

Decide the style of bearing required and check that the

The standard bearing may be used at loadings below

For loadings in excess of the recommended maximum,

Select the appropriate axial and lateral movement

Where the bearing gives a choice of height dimensions,

If no standard EASISLIDE bearing suits your application,

Glass Filled PTFE

Bearing Pressure (N/mm2)

THE RIGHT BEARING SIZE

Bearing Pressure (N/mm2)

the style of the bearing.

Where a particular parameter is not applicable, it is omitted,

Glass Filled PTFE

THE RIGHT DESIGN

THE RIGHT PART NUMBER

175 200 225 250

EASISLIDE bearings are designed and produced by Pipe

TYPES OF LEG ES01

to order. Care should be taken if

RANGE 1 = +/-12.5 mm MOVEMENT

FOR SIZE 16000 AND ABOVE,

Easislide PTFE Slide

You might also like