Scribd Logo
Upload

Welcome to Scribd!

  • 479 views

    Swagelok Ball Valve

    Uploaded by

    Phornlert Wana
    Ball valves are designed to be used in a fully open or fully closed position. Working pressures up to 6000 psig (413 bar) compact, maximum-flow design # flow coefficient (Cv) 0. To 1. Low operating torque # 2-way and 3-way flow pattern # Panel mounting # Pneumatic and electric Heavy-duty handle indicates flow direction.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Swagelok Ball Valve

    Uploaded by

    Phornlert Wana
    479 views4 pages
    Ball valves are designed to be used in a fully open or fully closed position. Working pressures up to 6000 psig (413 bar) compact, maximum-flow design # flow coefficient (Cv) 0. To 1. Low operating torque # 2-way and 3-way flow pattern # Panel mounting # Pneumatic and electric Heavy-duty handle indicates flow direction.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Ball valves are designed to be used in a fully open or fully closed position. Working pressures up to 6000 psig (413 bar) compact, maximum-flow design # flow coefficient (Cv) 0. To 1. Low operating torque # 2-way and 3-way flow pattern # Panel mounting # Pneumatic and electric Heavy-duty handle indicates flow direction.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    479 views4 pages

    Swagelok Ball Valve

    Uploaded by

    Phornlert Wana
    Ball valves are designed to be used in a fully open or fully closed position. Working pressures up to 6000 psig (413 bar) compact, maximum-flow design # flow coefficient (Cv) 0. To 1. Low operating torque # 2-way and 3-way flow pattern # Panel mounting # Pneumatic and electric Heavy-duty handle indicates flow direction.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    www.swagelok.

    com

    Tr unnion Ball Valve sSpe cial A lloy Mate r ials


    83 Se r ie s
    Alloy 625, alloy 825, and SAF 2507 super duplex stainless steel materials Working pressures up to 6000 psig (413 bar) 1/4 to 1/2 in. Swagelok tube fitting or NPT end connections Compact, maximum-flow design Flow coefficient (Cv) 0.75 to 1.6 Low operating torque 2-way and 3-way flow pattern Panel mounting Pneumatic and electric

    Heavy-duty handle indicates flow direction. Bottom-loaded stem: prevents stem blowout enhances system safety.

    actuators available

    Spring-loaded seats:
    provide leak-tight integrity in both

    low- and high-pressure systems


    contribute to low operating torque reduce seat wear from pressure

    surges.

    Trunnion-style ball: prevents ball blowout contributes to low operating torque.

    Pressure-Temperature Ratings
    Pressure-temperature ratings for 83series valves are based on listed seat materials, fluorocarbon FKM Orings, and reinforced PTFE backup rings. Low-temperature L83 series ball valves are available. See page 4.
    Material Seat Material Temperature, F (C) 0 (17) to 100 (37) 150 (65) 200 (93) 250 (121) 300 (148) 350 (176) 400 (204) 450 (232) Alloy 625, Alloy 825, SAF 2507 PCTFE 6000 (413) 3000 (206) 2000 (137) PEEK 6000 (413) 5800 (399) 5000 (344) 4100 (282) 3200 (220) 2300 (158) 1400 (96.4) 500 (34.4) Working Pressure, psig (bar)

    Important Information About Ball Valves Swagelok ball valves are designed to be used in a
    fully open or fully closed position.

    Valves that have not been cycled for a period of time


    may have a higher initial actuation torque.

    Trunnion Ball ValvesSpecial Alloy Materials

    Materials of Construction
    1 2 3 4 5 15 16 17 22

    19 21

    18 20

    2-Way

    3-Way

    Valve Body Material Alloy 625 Component 1 Handle 2 Set screw 3 Panel nut 4 Stop pin (2-way2; 3-way1) 5 Body 6 Stem 7 Stem O-rings (2-way2; 3-way1) Alloy 625/B446 Alloy 625/B446 Alloy 825 Phenolic with brass insert S17400 SS 316 SS/B783 Stainless steel Alloy 825/B425 Alloy 825/B425 Fluorocarbon FKM PEEK PTFE/D1710 2-wayReinforced PTFE; 3-wayPEEK Alloy 625/B446 Alloy 825/B425 Reinforced PTFE Fluorocarbon FKM PEEK PCTFE/AMS 3650 or PEEK Alloy 625/B446 Alloy 625/B446 Alloy 825/B425 Alloy X-750/AMS 5542 Alloy 825/B425 Reinforced PTFE Fluorocarbon FKM PTFE/D1710 Alloy 625/B446 Alloy 825/B425 SAF 2507/A479 Fluorinated-based (all valves); tungsten disulfide additive (valves with PEEK seats) SAF 2507/A479 SAF 2507/A479 SAF 2507/A479 SAF 2507/A479 SAF 2507/A479 SAF 2507 Material Grade/ASTM Specification

    7 10 11

    8 7 10

    11

    8 Primary stem backup ring (3-way) 9 Secondary stem backup ring (3-way) 10 Stem bearing 11 Ball

    12

    13 14

    12 Trunnion backup rings (2) (2-way) 13 Trunnion O-rings (2) (2-way) 14 Trunnion bearings (3-way) 15 Seats (2) 16 Seat carriers (2) 17 Seat springs (12) 18 Seat carrier guides (2) 19 Seat carrier backup rings (4) 20 Seat carrier O-rings (2) 21 End screw seals (2) 22 End screws (2) Lubricants

    Wetted components listed in italics. Ball trunnions are PTFE coated in all 2-way valves.

    Trunnion Ball ValvesSpecial Alloy Materials

    Testing
    Every Swagelok trunnion ball valve is factory tested with nitrogen at 1000 psig (69 bar). Seats have a maximum allowable leak rate of 0.1stdcm3/min. Shell testing is performed to a requirement of no detectable leakage with aliquid leak detector.

    Cleaning and Packaging


    All Swagelok trunnion ball valves are cleaned and packaged in accordance with Swagelok Standard Cleaning and Packaging (SC-10), MS-06-62.

    Ordering Information and Dimensions


    Dimensions, in inches (millimeters), are for reference only and are subject to change. Dimensions shown with Swagelok tube fitting nuts finger-tight.
    2-Way
    (38.1)

    3-Way
    (38.1)

    1.50

    1.50

    (46.7)

    1.84

    29/32 (23.0) panel hole drill

    0.38 (9.7) max panel thickness


    (46.5)

    1.83

    29/32 (23.0) panel hole drill

    0.38 (9.7) max panel thickness

    (13.0)

    0.51

    (12.7)

    0.50

    (14.7)

    0.58

    (26.9)

    1.06

    B A B 1/4 in. female NPT port A

    Select a basic valve ordering number from the table below. Add the material designator from the table to the right. Example: 625 -83KF4 Valve ordering numbers specify a PCTFE seat. To order valves with PEEK seat, replace K in the ordering number with a P. Example: 625-83PF4
    End Connections Type Female NPT Fractional Swagelok tube fitting Size 1/4 in. 1/2 in. 1/4 in. 3/8 in. 1/2 in. 1/4 in. 1/2 in. 1/4 in. 3/8 in. 1/2 in. 0.75 Flow Coefficient (Cv) 1.0 1.2 1.6 1.4 1.0

    Material Alloy 625 Alloy 825 SAF 2507

    Designator 625 825 2507

    Basic Ordering Number SS-83KF4 SS-83KF8 SS-83KS4 SS-83KS6 SS-83KS8 SS-83XKF4 SS-83XKF8 SS-83XKS4 SS-83XKS6 SS-83XKS8

    Dimensions, in. (mm) A 2.94 (74.7) 4.25 (108) 4.14 (105) 4.39 (112) 4.60 (117) 2.94 (74.7) 4.25 (108) 4.14 (105) 4.39 (112) 4.60 (117) B 1.47 (37.3) 2.13 (54.1) 2.07 (52.6) 2.19 (55.6) 2.30 (58.4) 1.47 (37.3) 2.13 (54.1) 2.07 (52.6) 2.19 (55.6) 2.30 (58.4)

    2-Way Valve, 0.187 in. (4.75 mm) Orifice

    3-Way Valve, 0.187 in. (4.75 mm) Orifice Female NPT Fractional Swagelok tube fitting

    For more information about pressure ratings of valves with tube fitting end connections, see Swagelok Tubing Data, MS-01-107. Not recommended for panel mounting. Bottom port of all 3-way valves is 1/4 in. female NPT.

    Options and Accessories


    83 Series Handles
    Black phenolic handles are standard. Colored phenolic and 316 stainless steel bar handles are available. To order, add a handle designator to the valve ordering number. Example: 625-83KF4-RD
    Handle Black phenolic Blue phenolic Green phenolic Orange phenolic Red phenolic Yellow phenolic Stainless steel bar Designator -BK -BL -GR -OG -RD -YW -SH

    Low-Temperature Service Options


    Trunnion ball valves for low-temperature service, with a temperature rating of 40 to 200F (40 to 93C), are available. Low-temperature valves have low-temperature Buna C O-rings. All other materials and ratings are the same as those of standard valves. To order a valve for low-temperature service, insert L into the valve ordering number. Example: 625-L83KF4

    L83 Series Pressure-Temperature Ratings


    Material Seat Material Temperature, F (C) 40 (40) to 100 (37) 150 (65) 200 (93) Alloy 625, Alloy 825, SAF 2507 PCTFE PEEK Working Pressure, psig (bar) 6000 (413) 6000 (413) 3000 (206) 5800 (399) 2000 (137) 5000 (344)

    Handle Kits
    Handle kits contain a handle and set screw. Standard black phenolic handle kit ordering number: PH5K83-BK To order handles in other colors, replace -BK in the kit ordering number with a handle designator. Example: PH-5K-83-RD Stainless steel bar handle kit ordering number: SS5K83

    83 Series Seal Kits


    Seal kits contain components of the same materials as new components. See Materials of Construction, page 2, or Low-Temperature Service, this page. For a complete ordering number, add a special alloy material designator and a seat material designator to a basic seal kit ordering number. Examples: 6  25 -9K-83K 825 -9K-L83P
    Valve Series 83 2-way Lowtemperature 83 2-way 83 3-way Lowtemperature 83 3-way Basic Seal Kit Ordering Number -9K-83 -9K-L83 -9K-83X -9K-L83X Kit Contents Instructions, O-rings, stem bearing, ball, seat subassemblies (seats and seat carriers), seat springs, end screw seals, lubricant, and lubricant Material Safety Data Sheet (MSDS) Instructions, stem, O-rings, backup rings, bearings, ball, seat subassemblies (seats and seat carriers), seat springs, end screw seals, lubricant, and lubricant MSDS Special Alloy Material Alloy 625 Alloy 825 SAF 2507 Seat Material PEEK PCTFE Designator 625 825 2507 Designator P K

    Pneumatic Actuators
    Pneumatic actuators are available for the special alloy, 83 series trunnion ball valves. See the Swagelok Trunnion Ball Valves83 Series and H83 Series catalog, MS01166.

    Options for Pneumatic Actuators


    Swagelok can provide factory assemblies with pneumatic actuators, solenoid valves, limit switches, and position sensors, as well as kits for field assembly. For more information, see the Swagelok Ball Valve Actuation Options catalog, MS02343. Mounting bracket kits for ISO5211-compliant actuators are available. See the Actuated Ball Valve Selection GuideISO5211-Compliant Actuator Mounting Bracket Kits, MS02136.

    Electric Actuators
    Electric actuators are available. See the Swagelok Electric Actuators, 141 and 142 Series catalog, MS-01-35.

    Safe Product Selection When selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Caution: Do not mix or interchange parts with those of other manufacturers.

    Warranty Information
    Swagelok products are backed by The Swagelok Limited Lifetime Warranty. For a copy, visit swagelok.com or contact your authorized Swagelok representative.

    SwagelokTM Swagelok Company SAF 2507TM Sandvik AB 20102012 Swagelok Company Printed in U.S.A., AGS MS-02-357, R3

    You might also like