Scribd Logo
Upload

Welcome to Scribd!

  • 247 views

    Industrial Tribology

    Uploaded by

    gurudev001
    The document discusses the key topics in tribology covered in 5 units: Unit I discusses surface topography, contact between surfaces, sources of friction including adhesion and plowing, and friction characteristics of different materials. Unit II covers different types of wear, theories of wear mechanisms for metals and non-metals, corrosive wear, and methods for measuring wear. Unit III examines types and properties of lubricants, lubrication testing methods, and lubrication regimes including hydrodynamic, boundary, solid, and hydrostatic lubrication. Unit IV presents the Reynolds equation for film lubrication, analyses of journal and loaded bearings, and considerations of speed, load capacity, and friction. Unit V covers surface

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    Industrial Tribology

    Uploaded by

    gurudev001
    247 views2 pages
    The document discusses the key topics in tribology covered in 5 units: Unit I discusses surface topography, contact between surfaces, sources of friction including adhesion and plowing, and friction characteristics of different materials. Unit II covers different types of wear, theories of wear mechanisms for metals and non-metals, corrosive wear, and methods for measuring wear. Unit III examines types and properties of lubricants, lubrication testing methods, and lubrication regimes including hydrodynamic, boundary, solid, and hydrostatic lubrication. Unit IV presents the Reynolds equation for film lubrication, analyses of journal and loaded bearings, and considerations of speed, load capacity, and friction. Unit V covers surface

    Original Description:

    engg syllabus

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the key topics in tribology covered in 5 units: Unit I discusses surface topography, contact between surfaces, sources of friction including adhesion and plowing, and friction characteristics of different materials. Unit II covers different types of wear, theories of wear mechanisms for metals and non-metals, corrosive wear, and methods for measuring wear. Unit III examines types and properties of lubricants, lubrication testing methods, and lubrication regimes including hydrodynamic, boundary, solid, and hydrostatic lubrication. Unit IV presents the Reynolds equation for film lubrication, analyses of journal and loaded bearings, and considerations of speed, load capacity, and friction. Unit V covers surface

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    247 views2 pages

    Industrial Tribology

    Uploaded by

    gurudev001
    The document discusses the key topics in tribology covered in 5 units: Unit I discusses surface topography, contact between surfaces, sources of friction including adhesion and plowing, and friction characteristics of different materials. Unit II covers different types of wear, theories of wear mechanisms for metals and non-metals, corrosive wear, and methods for measuring wear. Unit III examines types and properties of lubricants, lubrication testing methods, and lubrication regimes including hydrodynamic, boundary, solid, and hydrostatic lubrication. Unit IV presents the Reynolds equation for film lubrication, analyses of journal and loaded bearings, and considerations of speed, load capacity, and friction. Unit V covers surface

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    ME2024 INDUSTRIAL TRIBOLOGY L T P C 3003 UNIT I SURFACES AND FRICTION 9 Topography of Engineering surfaces- Contact between surfaces - Sources

    of sliding Friction Adhesion-Ploug11hing- Energy dissipation mechanisms Friction Characteristics of metals - Friction of non metals. Friction of lamellar solids - friction of Ceramic materials and polymers - Rolling Friction - Source of Rolling Friction Stick slip motion - Measurement of Friction. UNIT II WEAR 9 Types of wear - Simple theory of Sliding Wear Mechanism of sliding wear of metals Abrasive wear Materials for Adhesive and Abrasive wear situations - Corrosive wear Surface Fatigue wear situations - Brittle Fracture - wear - Wear of Ceramics and Polymers - Wear Measurements. 76 UNIT III LUBRICANTS AND LUBRICATION TYPES 9 Types and properties of Lubricants - Testing methods - Hydrodynamic Lubrication Elasto-hydrodynamic lubrication- Boundary Lubrication - Solid Lubrication- Hydrostatic Lubrication. UNIT IV FILM LUBRICATION THEORY 9 Fluid film in simple shear - Viscous flow between very close parallel plates - Shear stress variation Reynolds Equation for film Lubrication - High speed unloaded journal bearings Loaded journal bearings Reaction torque on the bearings - Virtual Co-efficient of friction - The Sommerfield diagram. UNIT V SURFACE ENGINEERING AND MATERIALS FOR BEARINGS 9 Surface modifications - Transformation Hardening, surface fusion - Thermo chemical processes Surface coatings - Plating and anodizing - Fusion Processes - Vapour Phase processes - Materials for rolling Element bearings - Materials for fluid film bearings - Materials for marginally lubricated and dry bearings. TOTAL: 45 PERIODS TEXT BOOK: 1. A.Harnoy Bearing Design in Machinery Marcel Dekker Inc,NewYork,2003 REFERENCES: 1. M.M.Khonsari & E.R.Booser, Applied Tribology,John Willey &Sons,New York,2001 2. E.P.Bowden and Tabor.D., " Friction and Lubrication ", Heinemann EducationalBooks Ltd., 1974. 3. A.Cameron, " Basic Lubrication theory ", Longman, U.K.., 1981. 4. M.J.Neale (Editor), " Tribology Handbook ", Newnes. Butter worth, Heinemann, U.K., 1995.

    TRIBOLOGY IN DESIGN L T P C 3003 UNIT -I SURFACE INTERACTION AND FRICTION 7 Topography of Surfaces Surface features-Properties and measurement Surface interaction Adhesive Theory of Sliding Friction Rolling Friction-Friction properties of metallic and non-metallic materials friction in extreme conditions Thermal considerations in sliding contact UNIT II WEAR AND SURFACE TREATMENT 8 Types of wear Mechanism of various types of wear Laws of wear Theoretical wear models-Wear of Metals and Non metals Surface treatments Surface modifications surface coatings methods- Surface Topography measurements Laser methods instrumentation - International standards in friction and wear measurements UNIT III LUBRICANTS AND LUBRICATION REGIMES 8 Lubricants and their physical properties- Viscosity and other properties of oils Additivesand selection of Lubricants- Lubricants standards ISO,SAE,AGMA, BIS standards Lubrication Regimes Solid Lubrication-Dry and marginally lubricated contacts- Boundary Lubrication- Hydrodynamic lubrication Elasto and plasto hydrodynamic - Magneto hydrodynamic lubrication Hydro static lubrication Gas lubrication. UNIT IV THEORY OF HYDRODYNAMIC AND HYDROSTATIC LUBRICATION 12 Reynolds Equation,-Assumptions and limitations-One and two dimensional Reynolds Equation-Reynolds and Sommerfeld boundary conditions- Pressure wave, flow, load capacity and friction calculations in Hydrodynamic bearings-Long and short bearings-Pad bearings and Journal bearings-Squeeze film effects-Thermal considerations-Hydrostatic lubrication of Pad bearing- Pressure , flow , load and friction calculations-Stiffness considerations- Various types of flow restrictors in hydrostatic bearings UNIT V HIGH PRESSURE CONTACTS AND ELASTO HYDRODYNAMIC LUBRICATION 10 Rolling contacts of Elastic solids- contact stresses Hertzian stress equation- Spherical and cylindrical contacts-Contact Fatigue life- Oil film effects- Elasto Hydrodynamic lubrication Theory-Soft and hard EHL-Reynolds equation for elasto hydrodynamic lubrication- - Film shape within and outside contact zones-Film thickness and friction calculation- Rolling bearings- Stresses and deflections-Traction drives. 9 TOTAL: 45 PERIODS REFERENCES: 1. Rabinowicz.E, Friction and Wear of materials, John Willey &Sons ,UK,1995 2. Cameron, A. Basic Lubrication Theory, Ellis Herward Ltd., UK, 1981 3. Halling, J. (Editor) Principles of Tribology , Macmillian 1984. 4. Williams J.A. Engineering Tribology, Oxford Univ. Press, 1994. 5. S.K.Basu, S.N.Sengupta & B.B.Ahuja ,Fundamentals of Tribology, Prentice Hall of India Pvt Ltd , New Delhi, 2005 6. G.W.Stachowiak & A.W .Batchelor, Engineering Tribology, Butterworth-Heinemann, UK, 2005.

    You might also like