Hose

Hose Assembl i es, Bul k Hose, and End Connect i ons

I PTFE-lined, stainless steel braided
I Metal flexible
I Multipurpose push-on
I Thermoplastic
I Conductive core
www.swagel ok.com
2 Hose
Contents
PTFE-Lined, Stainless Steel Braided Hose . . . . . . . . . . . 3
I Working pressures ambient to 3000 psig (206 bar)
I Temperatures from 65 to 450F (53 to 230C)
I End connection sizes from 1/8 to 1 1/2 in. and 6 to 25 mm
I Standard and custom-length assemblies
High-Pressure, Metal Flexible Hose (FM Series) . . . . . . . 8
I Working pressures from vacuum up to 3100 psig (213 bar)
I Temperatures from 325 to 850F (200 to 454C)
I End connection sizes from 1/4 to 2 in. and 6 to 12 mm
I Standard and custom-length assemblies
Low-Pressure, Metal Flexible Hose (FL Series) . . . . . . . 13
I Working pressures from vacuum up to 1500 psig (103 bar)
I Temperatures from 325 to 850F (200 to 454C)
I End connection sizes from 1/4 to 1/2 in. and 6 to 12 mm
I Standard and custom-length assemblies
Multipurpose Push-On Hose . . . . . . . . . . . . . . . . . . . . . 17
I Working pressures ambient to 350 psig (24.1 bar)
I Temperatures from 40 to 200F (40 to 93C)
I End connection sizes from 1/4 to 3/4 in. and 6 to 18 mm
I Bulk hose, end connections, and custom-length assemblies
Thermoplastic Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
I Working pressures ambient to 5000 psig (344 bar)
I Temperatures from 40 to 200F (40 to 93C)
I End connection sizes from 1/4 to 1 in. and 6 to 22 mm
I Bulk hose, end connections, and custom-length assemblies
Conductive Core Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 26
I Working pressures ambient to 5000 psig (344 bar)
I Temperatures from 40 to 150F (40 to 65C)
I End connection sizes of 1/4 and 3/8 in. and 8 and 10 mm
I Custom-length assemblies
See NAHAD ASC 001.01, Flexible Metal Hose Assembly
Standard, for common hose routing guidelines.
See SAE J1273, Recommended Practices for Hydraulic Hose
Assemblies, for information on installation and use of hose.
Hose 3
Technical Data
304 SS overbraid
Smooth virgin PTFE core tube 316 SS collar
303 SS sleeve 316 SS Swagelok

tube adapter
end connection shown; other
end connections available
Features
I Stainless steel end connections are available in 1/8 to
1 1/2 in. and 6 to 25 mm sizes. Select end connections are
available in other alloys; contact your authorized Swagelok
sales and service representative.
I Lightweight construction allows easy handling and
installation.
I Standard and custom lengths are available.
PTFE-Lined, Stainless Steel Braided Hose (TH Series)
I PTFE material complies with FDA regulation 21CFR Part
177.1550 for contact with water, food, and beverages.
I PTFE is a nonconductive material. In applications that
require conductivity to help prevent static-electric discharge,
PTFE-lined hose with carbon black-filled core tube (TC
series) is available.
I PTFE-lined hose with alloy 400/R-405 end connections and
overbraid (TL4 series) is available. The pressure rating is
1500 psig (103 bar) at 70F (20C).
1000 (68.9)
Nominal
Hose Size
in. (mm)
Minimum Bend Radius

in. (cm)
Temperature
Range

F (C)
Working
Pressure at
70F (20C)
psig (bar)
Minimum Burst
Pressure at
70F (20C)
psig (bar) Static Dynamic
3/16 (4.8) 1.50 (3.81) 2.00 (5.08)
65 to 450
(53 to 230)
3000 (206) 12 000 (826)
5/16 (7.9) 3.50 (8.89) 5.00 (12.7)
13/32 (10.3)
5/8 (15.9)
7/8 (22.2)
4.50 (11.4) 6.00 (15.2)
6.00 (15.2) 7.50 (19.0)
9.00 (22.9) 11.3 (28.7)
2500 (172) 10 000 (689)
2000 (137) 8 000 (551)
1500 (103) 6 000 (413)
4 000 (275)
Testing
Every Swagelok PTFE-lined hose
assembly is pressure tested with water
for 30 to 60 seconds at 1.5 times the
working pressure to a requirement of no
visible leakage at ambient temperature.
Cleaning and Packaging
Swagelok PTFE-lined, stainless steel
braided hose components are cleaned in
accordance with Swagelok standard
cleaning and packaging specification
(SC-10). Each hose is bagged individually
and boxed; longer hoses are coiled,
bagged, and boxed.
Additional Considerations
PTFE is a permeable material. Gases,
vapors, and liquids can migrate
through the PTFE core tube. The rate
of permeation is affected by many
application-specific variables.
Measured to inside of bend.
Thermal cycling of hose may affect
its ability to maintain a leak-tight
seal.
Testing should be performed
to verify suitability in actual
operating conditions.
Pressure-Temperature Ratings
To determine pressure-temperature
ratings at elevated temperatures, follow
these steps:
1. Find the working pressure at 70F
(20C) in the Technical Data table
above.
2. Multiply this by the appropriate factor
listed in the Pressure-Temperature
Rating Factors table.
Example: 3/16 in. TH series hose at
300F (148C)
1. The working pressure rating at 70F
(20C) is 3000 psig (206 bar).
2. The temperature factor for 300F
(148C) is 0.52:
3000 (206) 0.52 = 1560 psig
(107 bar).
The 3/16 in. TH series hose pressure
rating at 300F (148C) is 1560 psig
(107 bar).
Pressure-Temperature Rating Factors
Ratings maintain a minimum factor of
4:1 between working pressure and
minimum burst pressure.
Temperature
F (C)
TH, TC
Series
65 (53)
100 (37)
200 (93)
0.75
0.58
1.00
0 (17)
0.48
300 (148)
400 (204)
450 (230)
0.52
0.46
Factor
TL4
Series
1.00
0.87
0.81
0.79
0.78
4 Hose
Ordering Information
Dimensions are for reference only and are subject to change.
PTFE-Lined Hose Standard Assemblies
Select an ordering number.
A L
Tube
OD
1/4
Minimum
Inside
Diameter
Ordering
Number A
0.16
(4.1)
SS-4BHT-6 8.00 (20.3) 5.97 (15.2)
SS-4BHT-12 14.0 (35.6) 12.0 (30.5)
SS-4BHT-18 20.0 (50.8) 18.0 (45.7)
SS-4BHT-24 26.0 (66.0) 24.0 (61.0)
SS-4BHT-36 38.0 (96.5) 36.0 (91.4)
SS-4BHT-48 50.0 (127) 48.0 (122)
SS-4BHT-60 62.0 (157) 60.0 (152)
SS-4BHT-72 74.0 (188) 72.0 (183)
SS-4BHT-120 122 (310) 120 (305)
6
4.1
(0.16)
SS-4MBHT-12 35.6 (14.0) 30.2 (11.9)
SS-4MBHT-24 66.0 (26.0) 60.7 (23.9)
SS-4MBHT-36 96.5 (38.0) 91.2 (35.9)
3/8
0.27
(6.9)
SS-6BHT-12 14.0 (35.6) 11.8 (30.0)
SS-6BHT-24 26.0 (66.0) 23.8 (60.5)
SS-6BHT-36 38.0 (96.5) 35.8 (90.9)
SS-6BHT-48 50.0 (127) 47.8 (121)
Maximum
Outside
Diameter L
0.54
(13.7 )
13.7
(0.54)
0.73
(18.5)
Tube Adapter End Connections
VCO

O-Ring Face Seal Fitting End Connections

48.8 (124)
1
3/4
1/2
12
0.36
(9.1)
8.3
(0.33)
0.53
(13.5)
0.80
(20.3)
0.86
(21.8)
SS-8BHT-12
SS-8BHT-24
SS-8BHT-36
SS-8BHT-48
SS-8BHT-60
SS-8BHT-72
21.8
(0.86)
SS-8MBHT-24
SS-8MBHT-36
1.04
(26.4)
1.36
(34.5)
SS-12BHT-24
SS-12BHT-36
SS-16BHT-36
SS-16BHT-48
14.5 (36.8) 11.8 (30.0)
26.5 (67.3) 22.3 (56.6)
38.5 (97.8) 35.8 (90.9)
50.5 (128) 47.8 (121)
62.5 (159) 59.8 (152)
74.5 (189) 71.8 (182)
67.3 (26.5) 60.5 (23.8)
97.8 (38.5) 90.9 (35.8)
26.5 (67.3) 23.8 (60.5)
38.5 (97.8) 35.8 (90.9)
39.5 (100) 36.8 (93.5)
51.5 (131)
VCO
Size
in.
Minimum
Inside
Diameter
in. (mm)
Ordering
Number
A
in. (cm)
SS-4BHO-12 13.5 (34.3) 12.1 (30.7)
SS-4BHO-24 25.5 (64.8) 24.1 (61.2)
SS-4BHO-36 37.5 (95.3) 36.1 (91.7)
Maximum
Outside
Dimension,
Hex Flat
L
in. (cm)
1/2
0.36
(9.1)
1 in.
SS-8BHO-12
SS-8BHO-24
SS-8BHO-36
SS-8BHO-48
13.5 (34.3) 11.3 (28.7)
25.5 (64.8) 23.3 (59.2)
37.5 (95.3) 35.3 (89.7)
49.5 (126) 47.3 (120)
1/4
0.16
(4.1)
11/16 in.
Dimensions, in. (mm)
Dimensions, mm (in.)
Nominal
Hose
Size
in. (cm)
cm (in.)
3/16
5/16
13/32
5/8
7/8
3/16 in.
13/32 in.
Nominal
Hose
Size
in.
3/16
13/32
Hose 5
PTFE-Lined Hose Custom Assemblies
Tube Adapters
A
Tube
OD
1/4
Minimum
Inside
Diameter A
0.16 (4.1) 1.64 (41.7)
3/8 0.27 (6.9)
1.81 (46.0)
Maximum
Outside
Diameter
0.54 (13.7)
0.73 (18.5)
3/4
1/2 0.36 (9.1)
0.53 (13.5)
0.86 (21.8)
1.02 (25.9)
2.19 (55.6)
2.72 (69.1)
Hose
Size
Designator
End
Connection
Designator
4 TA4
6
TA6
TA8
12
TA12
Dimensions, in. (mm)
8
2.27 (57.7)
1
0.56 (14.2) 16 3.29 (83.6)
0.58 (14.7)
TA16
12 2.99 (75.9)
0.80 (20.3) 16 3.57 (90.7)
Dimensions, mm (in.)
6
8
10
12
18
4.1 (0.16)
6.9 (0.27)
8.4 (0.33)
13.5 (0.53)
13.7 (0.54)
4
6
8
12
TM6
TM8
TM10
TM12
TM18
42.2 (1.66)
50.5 (1.99)
54.1 (2.13)
65.3 (2.57)
69.1 (2.72)
20.1 (0.79)
26.9 (1.06)
S S - T H 4 T A 4 T A 4 - 2 8 or 7 1 C M
1st 2nd
End Connections
Hose Size
4 = 3/16 in. (only size available for TL series)
6 = 5/16 in.
8 = 13/32 in.
12 = 5/8 in.
16 = 7/8 in.
Hose Series
TH = PTFE hose
TC = PTFE hose, carbon
black filled
TL = 1/4 in. PTFE hose
with alloy 400/R-405
overbraid
End Connection Material
SS = 316 stainless steel
C20 = Alloy 20
M = Alloy 400/R-405
INC = Alloy 600
HC = Alloy C-276
TI = Titanium
Typical Ordering Number
Build a hose assembly ordering number by combining the designators in the sequence shown below.
See tables below.
VCO O-Ring
Face Seal Fittings,
Female Swivel
A
VCO
Size
in.
1/2
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
0.27 (6.9) 1.83 (46.5)
0.36 (9.1) 1.95 (49.5)
Maximum
Outside
Dimension,
Hex Flat
3/4
0.58 (14.7)
0.63 (16.0)
1 1/2 in.
2.21 (56.1)
2.71 (68.8)
Hose
Size
Designator
End
Connection
Designator
1/4 0.16 (4.1) 4 VF4 1.69 (42.9)
6
VF8
8
12
VF12
16
1 VF16 0.80 (20.3) 2.68 (68.1)
1.36 (34.5)
1.34 (34.0)
1.36 (34.5)
14.0 (0.55)
15.5 (0.61)
11/16 in.
1 in.
1 3/4 in.
Must be in whole
number increments.
in. cm
Overall Length
25 19.0 (0.75) 34.5 (1.36) 16 TM25 88.6 (3.49)
See next page for more end connections.
6 Hose
Female Pipe Threads
A
Pipe
Size
in.
1/4
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
1.96 (49.8)
3/8
0.27 (6.9)
2.02 (51.3)
Maximum
Outside
Dimension,
Hex Flat
7/8 in.
3/4
1/2 0.36 (9.1)
0.58 (14.7)
1 1/16 in.
1 5/16 in.
2.42 (61.5)
2.57 (65.3)
Hose
Size
Designator
End
Connection
Designator
0.16 (4.1) 4
PF4
1.88 (47.8)
6
PF6
8 PF8
12 PF12
Male Pipe Threads
A
Pipe
Size
in.
1/4
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
0.16 (4.1) 1.88 (47.8)
3/8
0.27 (6.9) 1.98 (50.3)
Maximum
Outside
Dimension,
Hex Flat
11/16 in.
1/2
0.47 (11.9)
7/8 in.
1 1/16 in.
2.32 (58.9)
2.47 (62.7)
Hose
Size
Designator
End
Connection
Designator
4
PM4
6
PM6
PM8
12
Male NPT
0.36 (9.1) 8
2.10 (53.3)
3/4
0.58 (14.7)
PM12
0.63 (16.0)
16
2.99 (75.9)
1 0.80 (20.3) PM16 3.22 (81.8)
Male BSP/ISO Tapered
1/4
1/2
3/4
1
0.16 (4.1)
0.36 (9.1)
0.58 (14.7)
0.80 (20.3)
11/16 in. 4
8
12
16
MT4
MT8
MT12
MT16
1.88 (47.8)
2.32 (58.9)
2.47 (62.7)
3.22 (81.8)
1 1/16 in.
1 3/8 in.
0.27 (6.9)
0.28 (7.1)
6
8
1.98 (50.3)
2.10 (53.3)
Swagelok Tube Fittings
A
Fitting
Size
in.
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
3/8 0.27 (6.9) 2.27 (57.7)
Maximum
Outside
Dimension,
Hex Flat
3/4
1/2 0.36 (9.1)
0.58 (14.7)
15/16 in.
1 1/8 in.
2.43 (61.7)
2.87 (72.9)
Hose
Size
Designator
End
Connection
Designator
6 SL6
8 SL8
12 SL12
3/4 in.
1 3/8 in.
1 1/8 in.
7/8 in.
3/4 in.
1/8
1/4
0.10 (2.5)
0.16 (4.1)
9/16 in. 4
SL2
SL4
1.94 (49.3)
1.97 (50.0)
Female NPT
Female BSP/ISO Tapered
1/4
1/2
4
8
0.16 (4.1)
0.36 (9.1)
3/4 in.
1 1/16 in.
FT4
FT8
1.88 (47.8)
2.42 (61.5)
Dimensions, in. (mm)
6
10
12
18
Dimensions, mm (in.)
4.1 (0.16) 9/16 in.
3/4 in.
15/16 in.
30 mm
4
6
8
12
SM6
SM10
SM12
SM18
49.8 (1.96)
44.7 (1.76)
61.7 (2.43)
72.9 (2.87)
6.9 (0.27)
9.1 (0.36)
14.7 (0.58)
Hose 7
VCR

Metal Gasket
Face Seal Fittings,
Female Swivel
Male JIC (AN) 37Flare
Female JIC (AN) 37,
Female Swivel
Sanitary Flanges
A
A
A
A
VCR
Size
in.
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
1/2 0.36 (9.1) 2.17 (55.1)
Maximum
Outside
Dimension,
Hex Flat
1 1/16 in.
3/4 0.58 (14.7) 1 1/2 in. 2.52 (64.0)
Hose
Size
Designator
End
Connection
Designator
1/4 0.16 (4.1) 4 RF4 1.87 (47.5)
8 RF8
12 RF12
1 RF16 0.80 (20.3) 16 3.35 (85.1)
Fitting
Size
in.
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
3/8 0.27 (6.9) 1.98 (50.3)
Maximum
Outside
Dimension,
Hex Flat
5/8 in.
Hose
Size
Designator
End
Connection
Designator
1/4 0.16 (4.1) 4 AN4 1.88 (47.8)
6 AN6
Fitting
Size
in.
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
3/8 0.27 (6.9)
Maximum
Outside
Dimension,
Hex Flat
3/4 in.
1/2 0.36 (9.1) 15/16 in. 2.09 (53.1)
Hose
Size
Designator
End
Connection
Designator
1/4 0.16 (4.1) 4 AS4 1.62 (41.1)
6 AS6
8 AS8
Fitting
Size
in.
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
3/4 0.58 (14.7) 2.23 (56.6)
Maximum
Outside
Diameter
in. (mm)
1.00 (25.4)
1
0.80 (20.3)
1.06 (26.9) 2.91 (73.9)
Hose
Size
Designator
End
Connection
Designator
1/2 0.36 (9.1) 6 SC8 2.08 (52.8)
12 SC12
16
SC16
1 1/2 SC24 2.35 (59.7)
3/4 in.
1 3/4 in.
1/2 0.36 (9.1) 8 AN8 2.32 (58.9)
11/16 in.
7/8 in.
9/16 in.
0.99 (25.1)
1.98 (50.3)
Maximum pressure rating is 300 psig (20.6 bar). Working pressure and temperature ratings of
hoses with sanitary flange end connections may be limited by the gasket material and clamp.
Clear PVC Cover
I resists abrasion
I withstands temperatures from 40 to 165F (40 to 73C).
To order, add V to a hose assembly ordering number.
Example: SS-TH4TA4TA4-28V
Polyolefin Cover
I resists moisture
I withstands temperatures from 65 to 275F (53 to 135C).
To order, add P to a hose assembly ordering number.
Example: SS-TH4TA4TA4-28P
Acryl-Saturated Fiberglass Cover
I resists abrasion and UV light.
To order, add F1 to a hose assembly
ordering number.
Example: SS-TH4TA4TA4-28F1
1.82 (46.2)
Silicone-Coated Fiberglass Cover
I maintains flexibility down to 65F
(53C).
To order, add F to a hose assembly
ordering number.
Example: SS-TH4TA4TA4-28F
302 Stainless Steel Spring Guard
I covers entire hose to
protect against kinking
and abrasion.
To order, add S to a hose assembly ordering number.
Example: SS-TH4TA4TA4-28S
Options and Accessories
Options and accessories do not change hose technical data. Hose operating parameters must be considered when selecting a cover.
8 Hose
Features
I Hose can be used in vacuum and positive pressure service.
I Stainless steel end connections are available in 1/4 to 2 in.
and 6 to 12 mm sizes.
316/316L SS overbraid
316L SS core tube
316 SS weld ring
High-Pressure, Metal Flexible Hose (FM Series)
I End connections are welded in accordance with ASME
Boiler and Pressure Vessel Code Section IX.
I Standard and custom lengths are available.
Temperature
F (C) Factor
325 (200)
200 (93)
300 (148)
400 (204)
1.00
0.84
0.76
0.70
Pressure-Temperature Ratings
To determine pressure-temperature
ratings at elevated temperatures, follow
these steps:
1. Find the working pressure at 70F
(20C) in the Technical Data table
above.
2. Multiply this by the appropriate factor
listed in the Pressure-Temperature
Rating Factors table.
Example: 1/4 in. hose at 500F (260C)
1. The working pressure rating at 70F
(20C) is 3100 psig (213 bar).
2. The temperature factor for 500F
(260C) is 0.65:
3100 (213) 0.65 = 2015 psig
(138 bar).
The 1/4 in. hose pressure rating at
500F (260C) is 2015 psig (138 bar).
316 SS Swagelok tube
adapter end connection
shown; other end
connections available
Technical Data
Pressure-Temperature Rating Factors
Ratings maintain a minimum factor of
4:1 between working pressure and
minimum burst pressure.
Testing
Every Swagelok FM series metal
flexible hose assembly is inboard helium
leak tested to a maximum leak rate of
1 10
5
std cm
3
/s.
Helium leak testing to a maximum leak
rate of 1 10
9
std cm
3
/s is available.
See Custom Assemblies, page 10.
Cleaning and Packaging
Swagelok FM series metal flexible hose
components are cleaned in accordance
with Swagelok standard cleaning and
packaging specification (SC-10). Each
hose is bagged individually and boxed;
longer hoses are coiled, bagged, and
boxed or crated.
2 000 (137)
Nominal
Hose Size
in. (mm)
Minimum Bend Radius

in. (cm)
Temperature
Range
F (C)
Working
Pressure at
325 to 100F
(200 to 37C)
psig (bar)
Minimum
Burst Pressure
at 70F (20C)
psig (bar)
Hose
Series Static Dynamic
325 to 850
(200 to 454)
1/4 (6.4)
3/8 (9.7)
1/2 (12.7)
3/4 (19.0)
1 (25.4)
1 1/4 (31.8)
1 1/2 (38.1)
2 (50.8)
2.25 (5.72)
3.00 (7.62)
4.50 (11.4)
6.00 (15.2)
6.75 (17.1)
4.50 (11.4)
5.25 (13.3)
6.75 (17.1)
10.0 (25.4)
12.0 (30.5)
16.0 (40.6)
17.0 (43.2)
20.0 (50.8)
23.0 (58.4)
26.0 (66.0)
32.0 (81.3)
3100 (213)
2000 (137)
1800 (124)
1500 (103)
1200 (82.7)
950 (65.4)
900 (62.0)
500 (34.4)
12 400 (854)
8 000 (551)
7 200 (496)
6 000 (413)
4 800 (330)
3 800 (261)
3 600 (248)
FM4
FM6
FM8
FM12
FM16
FM20
FM24
FM32
Measured to inside of bend.
100 (37) 1.00
DO NOT SUBJECT METAL FLEXIBLE HOSE TO SYSTEM PRESSURE
SURGES, SHOCK, OR PULSATIONS GREATER THAN 50 % OF THE
WORKING PRESSURE RATING.
500 (260)
600 (315)
700 (371)
800 (426)
850 (454)
0.65
0.62
0.59
0.57
0.56
Hose 9
A
Tube
OD
in.
1/4
Minimum
Inside
Diameter
in. (mm)
Ordering
Number
A
in. (cm)
0.19
(4.8)
SS-FM4SL4PM4-12 12.0 (30.5) 8.26 (21.0)
SS-FM4SL4PM4-36 36.0 (91.4) 32.3 (82.0)
3/8
0.28
(7.1)
SS-FM6SL6PM6-18 18.0 (45.7) 14.2 (36.1)
SS-FM6SL6PM6-36 36.0 (91.4) 32.2 (81.8)
Maximum
Outside
Dimension,
Hex Flat
L
in. (cm)
13/16 in.
15/16 in.
Hose
Series
FM4
FM6
54.8 (139)
1
3/4
1/2
0.40
(10.2)
0.62
(15.7)
0.87
(22.1)
1 1/16 in.
SS-FM8SL8PM8-18
SS-FM8SL8PM8-48
FM8
1 1/2 in.
1 3/4 in.
SS-FM12SL12PM12-18
SS-FM12SL12PM12-48
SS-FM16SL16PM16-24
SS-FM16SL16PM16-60
FM12
FM16
18.0 (45.7) 13.6 (34.5)
48.0 (122) 43.6 (111)
18.0 (45.7) 13.4 (34.0)
48.0 (122) 43.4 (110)
24.0 (61.0) 18.8 (47.8)
60.0 (152)
Ordering Information
Dimensions are for reference only and are subject to change.
FM Series Metal Flexible Hose Standard Assemblies
Select an ordering number.
Swagelok Tube Fitting to Male NPT End Connection
Pipe
Size
in.
1/4
3/8
1/2
3/4
1
Tube
OD
in.
1/4
Minimum
Inside
Diameter
in. (mm)
Ordering
Number
A
in. (cm)
0.19
(4.8)
SS-FM4SL4SL4-12 12.0 (30.5) 8.12 (20.6)
SS-FM4SL4SL4-36 32.1 (81.5)
3/8
0.28
(7.1)
SS-FM6SL6SL6-18 18.0 (45.7) 14.0 (35.6)
SS-FM6SL6SL6-36 32.0 (81.3)
Maximum
Outside
Dimension,
Hex Flat
L
in. (cm)
13/16 in.
15/16 in.
Hose
Series
FM4
FM6
54.7 (139)
1
3/4
1/2
0.40
(10.2)
0.62
(15.7)
0.87
(22.1)
1 1/16 in.
SS-FM8SL8SL8-18
SS-FM8SL8SL8-48
FM8
1 1/2 in.
1 3/4 in.
SS-FM12SL12SL12-18
SS-FM12SL12SL12-48
SS-FM16SL16SL16-24
SS-FM16SL16SL16-60
FM12
FM16
18.0 (45.7) 13.5 (34.3)
43.5 (110)
18.0 (45.7) 13.3 (33.8)
43.3 (110)
24.0 (61.0) 18.7 (47.5)
Swagelok Tube Fitting End Connections
Tube
OD
in.
1/4
Minimum
Inside
Diameter
in. (mm)
Ordering
Number
A
in. (cm)
0.19
(4.8)
SS-FM4TA4TA4-12 12.0 (30.5) 8.48 (21.5)
SS-FM4TA4TA4-24 24.0 (61.0) 20.5 (52.1)
SS-FM4TA4TA4-36 36.0 (91.4) 32.5 (82.6)
SS-FM4TA4TA4-48 48.0 (122) 44.5 (113)
Maximum
Outside
Diameter
in. (mm)
L
in. (cm)
0.81
(20.6)
Hose
Series
FM4
Tube Adapter End Connections
L
36.0 (91.4)
36.0 (91.4)
48.0 (122)
48.0 (122)
60.0 (152)
See Custom Assemblies, next page, for other end connections.
10 Hose
FM Series Metal Flexible Hose Custom Assemblies
Typical Ordering Number
Build a hose assembly ordering number by combining the designators in the sequence shown below.
Swagelok Tube Fittings
Tube
OD
1/4
Minimum
Inside
Diameter A
0.16 (4.1) 1.76 (44.7)
3/8 0.27 (6.9) 1.82 (46.2)
Maximum
Outside
Diameter
0.81 (20.6)
0.98 (24.9)
Hose
Series
Designator
FM6
3/4
1/2 0.37 (9.4)
0.58 (14.7)
1.06 (26.9)
1.44 (36.6) FM12
2.22 (56.4)
2.35 (59.7)
End
Connection
Designator
TA4
TA6
TA8
TA12
Dimensions, in. (mm)
FM4
1 0.80 (20.3) TA16 FM16 2.69 (68.3)
Dimensions, mm (in.)
6
10
12
4.1 (0.16)
7.1 (0.28)
8.9 (0.35)
20.6 (0.81) FM4
FM6
FM8
TM6
TM10
TM12
44.4 (1.75)
47.0 (1.85)
57.2 (2.25) 26.9 (1.06)
1.75 (44.4)
24.9 (0.98)
Tube Adapters
Fitting
Size
1/4
Minimum
Inside
Diameter
A
in. (mm)
0.28 (7.1)
2.00 (50.8)
3/8
2.02 (51.3)
Maximum
Outside
Dimension
13/16, hex flat
Hose
Series
Designator
FM4
FM6
3/4
1/2 0.41 (10.4)
0.63 (16.0)
1 1/16, hex flat FM8
1 1/2, hex flat FM12
2.24 (56.9)
2.35 (59.7)
End
Connection
Designator
0.19 (4.8) SL4 1.94 (49.3)
SL6
SL8
1
1 1/4
1 1/2
2
0.50 (12.7)
0.88 (22.4)
1.09 (27.7)
1.34 (34.0)
1.88 (47.8)
15/16, hex flat
1 3/4, hex flat
2 1/4, hex flat
2, hex flat
3, hex flat
FM16
FM20
FM24
FM32
SL10
SL20
SL24
SL32
2.27 (57.7)
2.64 (67.1)
4.04 (103)
4.75 (121)
5.72 (145)
Dimensions, in. (mm)
Dimensions, mm (in.)
6
8
10
12
4.8 (0.19)
6.4 (0.25)
7.9 (0.31)
9.7 (0.38)
20.6 (0.81), dia
24, hex flat
27, hex flat
FM4
FM6
FM8
SM6
SM8
SM10
SM12
62.2 (2.45)
63.2 (2.49)
51.6 (2.03)
56.9 (2.24)
FM8
A
Cap Weld Style
1 in. and Under
Manual Weld Style
Over 1 in.
A
A
SL12
S S - F M 4 T A 4 T A 4 - 2 8 or 7 1 C M H
1st 2nd
End Connections
Must be in whole
number increments.
Hose Series
See tables below.
Material
Hose and end connections
316 stainless steel
See tables below.
in. cm
Overall Length Options
H = Inboard helium leak
testing to a maximum
leak rate of 1 10
9
std cm
3
/s
See Options and
Accessories, page 12,
for additional choices.
5/8
SL16
Hose 11
37
Pipe
Size
in.
1/4
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
0.28 (7.1)
1.80 (45.7)
Maximum
Outside
Dimension,
Hex Flat
13/16 in.
Hose
Series
Designator
1/2
0.47 (11.9)
7/8 in.
1 1/16 in.
1.99 (50.5)
2.15 (54.6)
End
Connection
Designator
PM4
PM8
Male NPT
FM4
PM6
3/4 0.63 (16.0) PM12 2.22 (56.4)
1 0.88 (22.4)
FM8
PM16 2.54 (64.5)
Male BSP/ISO Tapered
1/4
1/2
0.28 (7.1)
0.47 (11.9)
13/16 in. FM4
FM8
MT4
MT8
1.80 (45.7)
2.16 (54.9)
1.81 (46.0)
1 3/4 in.
1 1/16 in.
Male Pipe Threads
3/8
1 1/4
1 1/2
2
PM20
PM24
PM32
FM12
FM16
FM20
FM24
FM32
1.09 (27.7)
1.34 (34.0)
1.81 (46.0)
FM6 15/16 in.
FM4
0.38 (9.7)
0.28 (7.1)
1 1/2 in.
2 1/8 in.
2 3/4 in.
3.06 (77.7)
3.72 (94.5)
4.19 (106)
Female JIC (AN) 37,
Female Swivel
Fitting
Size
in.
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
3/8 0.28 (7.1) 1.97 (50.0)
Maximum
Outside
Dimension,
Hex Flat
15/16 in.
Hose
Series
Designator
FM4
1/2 0.42 (10.7) 1 1/16 in. FM8 2.15 (54.6)
End
Connection
Designator
1/4 0.17 (4.3) AS4 1.87 (47.5)
AS6
AS8
FM6
13/16 in.
Pipe
Size
in.
1/4
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
Maximum
Outside
Dimension,
Hex Flat
Hose
Series
Designator
FM4
3/4 0.72 (18.3) 1 1/2 in. FM12 2.21 (56.1)
End
Connection
Designator
0.28 (7.1) PF4 1.81 (46.0)
PF12
13/16 in.
Female NPT
VCO
Size
in.
1/2
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
0.41 (10.4) 2.14 (54.4)
Maximum
Outside
Dimension,
Hex Flat
Hose
Series
Designator
FM4
End
Connection
Designator
1/4 0.18 (4.6) VF4 2.11 (53.6)
VF8 FM8
11/16 in.
1 in.
VCO O-Ring
Face Seal Fittings,
Female Swivel
A
Cap Weld Style
1 in. and Under
Manual Weld Style
Over 1 in.
A
A
A
A
See next page for more end connections.
12 Hose
VCR Metal Gasket
Face Seal Fittings,
Female Swivel
VCR
Size
in.
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
1/2 0.40 (10.2) 2.16 (54.9)
Maximum
Outside
Dimension,
Hex Flat
1 1/16 in.
Hose
Series
Designator
FM4
3/4 0.65 (16.5) 1 1/2 in. FM12 4.14 (105)
End
Connection
Designator
1/4 0.19 (4.8) RF4 2.00 (50.8)
RF8
RF12
1 RF16
FM8
FM16 0.87 (22.1) 4.76 (121)
13/16 in.
1 3/4 in.
VCR Metal Gasket
Face Seal Fittings,
Male Swivel
VCR
Size
in.
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
1/2 0.40 (10.2) 2.16 (54.9)
Maximum
Outside
Dimension,
Hex Flat
1 1/16 in.
Hose
Series
Designator
FM4
3/4 0.65 (16.5) 1 1/2 in. FM12 4.14 (105)
End
Connection
Designator
1/4 0.19 (4.8) RM4 2.60 (66.0)
RM8
RM12
1 RM16
FM8
FM16 0.87 (22.1) 4.76 (121)
13/16 in.
1 3/4 in.
A
A
Acryl-Saturated Fiberglass Cover
I resists abrasion and UV light.
To order, add F1 to a hose assembly
ordering number.
Example: SS-FM4TA4TA4-28F1
Silicone-Coated Fiberglass Cover
I maintains flexibility down to 65F
(53C).
To order, add F to a hose assembly
ordering number.
Example: SS-FM4TA4TA4-28F
Options and Accessories
Options and accessories do not change hose technical data. Hose operating parameters must be considered when selecting a cover.
Hose 13
Low-Pressure, Metal Flexible Hose (FL Series)
316L SS core tube Weld 321 SS overbraid
Features
I Hose can be used in vacuum and positive pressure service.
I Stainless steel end connections are available in 1/4 to 1/2 in.
and 6 to 12 mm sizes.
Testing
Every Swagelok FL series metal flexible
hose assembly is inboard helium leak
tested to a maximum leak rate of
1 10
5
std cm
3
/s.
Helium leak testing to a maximum leak
rate of 1 10
9
std cm
3
/s is available.
See Custom Assemblies, next page.
Cleaning and Packaging
Swagelok FL series metal flexible hose
components are cleaned in accordance
with Swagelok standard cleaning and
packaging specification (SC-10). Each
hose is bagged individually and boxed;
longer hoses are coiled, bagged, and
boxed.
Hose
Series
Minimum Bend Radius

in. (cm)
Temperature
Range
F (C)
Working
Pressure at
325 to 100F
(200 to 37C)
psig (bar)
Minimum
Burst Pressure
70F (20C)
psig (bar) Dynamic
FL4 5.50 (14.0) 1.00 (2.54)
325 to 850
(200 to 454)
1500 (103) 6000 (413)
FL8 7.00 (17.8) 1.75 (4.44) 400 (27.5)
Pressure-Temperature Ratings
To determine pressure-temperature
ratings at elevated temperatures, follow
these steps:
1. Find the working pressure at 70F
(20C) in the Technical Data table
above.
2. Multiply this by the appropriate factor
listed in the Pressure-Temperature
Rating Factors table.
Example: 1/4 in. hose at 500F (260C)
1. The working pressure rating at 70F
(20C) is 1500 psig (103 bar).
2. The temperature factor for 500F
(260C) is 0.65:
1500 (103) 0.65 = 975 psig
(67.1 bar)
The 1/4 in. hose pressure rating at
500F (260C) is 975 psig (67.1 bar).
Measured to inside of bend.
Rapid changes in pressure above or below normal base pressure can cause excessive wear between overbraid and core tube convolutions and is
often associated with reciprocating-type pumps.
I End connections are welded in accordance with ASME
Boiler and Pressure Vessel Code Section IX.
I Standard and custom lengths are available.
Technical Data
Impulse
Pressure

at
70F (20C)
psig (bar)
500 (34.4)
1200 (82.6)
Nominal
Hose Size
in. (mm)
1/4 (6.4)
1/2 (12.7)
Static
4800 (330)
316 SS Swagelok tube
adapter end connection
shown; other end
connections available
Temperature
F (C) Factor
325 (200)
200 (93)
300 (148)
400 (204)
1.00
0.84
0.76
0.70
Pressure-Temperature Rating Factors
Ratings maintain a minimum factor of
4:1 between working pressure and
minimum burst pressure.
100 (37) 1.00
500 (260)
600 (315)
700 (371)
800 (426)
850 (454)
0.65
0.62
0.59
0.57
0.56
14 Hose
A
Ordering Information
Dimensions are for reference only and are subject to change.
FL Series Metal Flexible Hose Standard Assemblies
Select an ordering number.
Tube Adapter End Connections
Tube
OD
1/4
Minimum
Inside
Diameter
Ordering
Number A
0.15
(3.8)
SS-FL4TA4TA4-12 12.0 (30.5) 8.48 (21.5)
SS-FL4TA4TA4-24 24.0 (61.0) 20.5 (52.1)
SS-FL4TA4TA4-36 36.0 (91.4) 32.5 (82.6)
SS-FL4TA4TA4-48 48.0 (122) 44.5 (113)
Maximum
Outside
Diameter L
0.67
(17.0)
Hose
Series
FL4
Dimensions, in. (mm)
1/2
6
12
0.37
(9.4)
FL8
SS-FL8TA8TA8-12
SS-FL8TA8TA8-24
SS-FL8TA8TA8-36
SS-FL8TA8TA8-48
12.0 (30.5)
24.0 (61.0)
36.0 (91.4)
48.0 (122)
Dimensions, mm (in.)
in. (cm)
7.50 (19.0)
19.5 (49.5)
31.5 (80.0)
43.5 (110)
L
3.8
(0.15)
8.9
(0.35)
17.0
(0.67)
SS-FL4TM6TM6-50CM
SS-FL4TM6TM6-100CM
SS-FL4TM6TM6-150CM
SS-FL8TM12TM12-50CM
SS-FL8TM12TM12-100CM
SS-FL8TM12TM12-150CM
FL4
FL8
50.0 (19.7)
100 (39.4)
150 (59.1)
50.0 (19.7)
100 (39.4)
150 (59.1)
41.1 (16.2)
91.2 (35.9)
141 (55.6)
38.6 (15.2)
88.6 (34.9)
139 (54.7)
FL Series Metal Flexible Hose Custom Assemblies
S S - F L 4 T A 4 T A 4 - 2 8 or 7 1 C M H
1st 2nd
End Connections
Must be in whole
number increments.
Hose Series
FL4 or FL8
See following tables.
End Connection Material
316 stainless steel
Typical Ordering Number
Build a hose assembly ordering number by combining the designators in the sequence shown below.
See following tables.
in. cm
Overall Length Options
H = Inboard helium leak
testing to a maximum
leak rate of 1 10
9
std cm
3
/s
See Options and
Accessories, page 16,
for additional choices.
cm (in.)
25.9
(1.02)
1.02
(25.9)
Hose 15
Swagelok Tube Fittings
Fitting
Size
1/4
Minimum
Inside
Diameter A
3/8 2.22 (56.4)
Maximum
Outside
Dimension,
Hex Flat
11/16
Hose
Series
Designator
FL4
FL8
End
Connection
Designator
0.18 (4.6) SL4 1.94 (49.3)
SL6
1 1/16
Dimensions, in. (mm)
Dimensions, mm (in.)
6
10
12
4.6 (0.18)
7.9 (0.31)
9.9 (0.39)
11/16 in.
1 1/16 in.
FL4
FL8
SM6
SM10
SM12
49.3 (1.94)
56.4 (2.22)
59.2 (2.33)
1/2 SL8
0.28 (7.1)
0.40 (10.2)
Tube
OD
1/4
Minimum
Inside
Diameter A
0.15 (3.8) 1.76 (44.7)
3/8 0.27 (6.9)
1.79 (45.5)
Maximum
Outside
Diameter
Hose
Series
Designator
1/2 0.37 (9.4)
2.03 (51.6)
2.25 (57.2)
End
Connection
Designator
TA4
TA6
TA8
Dimensions, in. (mm)
FL4
Dimensions, mm (in.)
6
8
12
3.8 (0.15)
5.6 (0.22)
8.9 (0.35)
FL4
TM6
TM8
TM12
44.4 (1.75)
45.2 (1.78)
57.4 (2.26)
FL8
Tube Adapters
2.33 (59.2)
10
10
FL8
TM10 7.1 (0.28)
51.3 (2.02)
Pipe
Size
in.
1/4
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
0.28 (7.1) 1.80 (45.7)
Maximum
Outside
Dimension,
Hex Flat
11/16 in.
Hose
Series
Designator
0.47 (11.9)
1 1/16 in.
2.21 (56.1)
End
Connection
Designator
PM4
PM8
Male NPT
FL4
PM6
Male BSP/ISO Tapered
1/4
1/2
0.28 (7.1)
0.47 (11.9)
11/16 in. FL4
FL8
MT4
MT8
1.80 (45.7)
2.21 (56.1) 1 1/16 in.
3/8 0.37 (9.4)
Male Pipe Threads
1/2
FL8
2.02 (51.3)
VCO
Size
in.
1/2
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
0.40 (10.2) 2.69 (68.3)
Maximum
Outside
Dimension
in. (mm)
Hose
Series
Designator
FL4
End
Connection
Designator
1/4 0.18 (4.6) VF4 2.50 (63.5)
VF8 FL8
11/16,
hex flat
1.02 (25.9),
dia
VCO O-Ring
Face Seal Fittings,
Female Swivel
A
A
A
A
0.67
(17.0)
0.67
(17.0)
1.02
(25.9)
1.02
(25.9)
See next page for more end connections.
16 Hose
VCR Metal Gasket
Face Seal Fittings,
Female Swivel
VCR Metal Gasket
Face Seal Fittings,
Male Swivel
VCR
Size
in.
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
1/2 0.40 (10.2) 2.88 (73.2)
Maximum
Outside
Dimension,
Hex Flat
1 1/16 in.
Hose
Series
Designator
FL4
End
Connection
Designator
1/4 0.19 (4.8) RM4 2.60 (66.0)
RM8
3/4 in.
VCR
Size
in.
Minimum
Inside
Diameter
in. (mm)
A
in. (mm)
1/2 0.40 (10.2) 2.21 (56.1)
Maximum
Outside
Diameter
in. (mm)
1.02 (25.9)
Hose
Series
Designator
FL4
End
Connection
Designator
1/4 0.18 (4.6) RF4 2.00 (50.8)
RF8 FL8
0.67 (17.0)
FL8
Tube Butt Welds
Tube
OD
in.
Minimum
Inside
Diameter
in. (mm)
1/2 0.40 (10.2) 2.09 (53.1)
Maximum
Outside
Diameter
in. (mm)
Hose
Series
Designator
FL4
End
Connection
Designator
1/4 0.18 (4.6) TB4 1.90 (48.3)
TB8 FL8
A
in. (mm)
A
A
A
0.75 in.
(19.0 mm)
0.67 (17.0)
1.02 (25.9)
Wall
Thickness
in.
0.035
0.049
Acryl-Saturated Fiberglass Cover
I resists abrasion and UV light.
To order, add F1 to a hose assembly
ordering number.
Example: SS-FL4TA4TA4-28F1
Silicone-Coated Fiberglass Cover
I maintains flexibility down to 65F
(53C).
To order, add F to a hose assembly
ordering number.
Example: SS-FL4TA4TA4-28F
Options and Accessories
Options and accessories do not change hose technical data. Hose operating parameters must be considered when selecting a cover.
Rayon fiber reinforcement Buna N cover Buna N core tube
Hose 17
Features
I Cover is flame-resistant in accordance with 30CFR, Part 18.
I Single-braid rayon fiber reinforcement is woven for maximum
strength and end connection retention.
I Stainless steel and brass end connections are available in
1/4 to 3/4 in. and 6 to 18 mm sizes.
Technical Data
Cleaning and Packaging
Swagelok PB series multipurpose push-on hose components are
cleaned in accordance with Swagelok standard cleaning and
packaging specification (SC-10). Each hose is bagged individually
and boxed; longer hoses are coiled, bagged, and boxed.
Multipurpose Push-On Hose (PB Series)
Minimum
Bend Radius

in. (cm)
Temperature
Range
F (C)
Working
Pressure at
70F (20C)
psig (bar)
Minimum Burst
Pressure at
70F (20C)
psig (bar)
2.50 (6.35)
3.00 (7.62)
5.00 (12.7)
7.00 (17.8)
350 (24.1)
300 (20.6)
300 (20.6)
300 (20.6)
1400 (96.4)
1200 (82.6)
1200 (82.6)
1200 (82.6)
40 to 200
(40 to 93)
Measured to inside of bend.
I End connections are reusable.
I Assembly does not require clamps or special tools.
I Hose is available in blue, black, green, gray, red, and yellow.
Ordering Information and Dimensions
Bulk Multipurpose Push-On Hose
To order a 250 ft (76 m) reel of standard blue hose, select an ordering number.
Example: PB-4
For hose of another color, add a hose color designator.
Example PB-4-BK
PB-12
Nominal
Hose Size
in.
Ordering
Number
1/4
3/8
1/2
3/4
PB-4
PB-6
PB-8
Hose Color Designator
Black -BK
Green -GR
Red -RD
Gray -GY
Yellow -YW
Nominal
Hose Size
in. (mm)
1/4 (6.4)
3/8 (9.7)
1/2 (12.7)
3/4 (19.0)
Caution:
Do not reuse hose.
Reels may contain more than one
piece of hose.
Nominal
Hose Size, in. 1/4 3/8, 1/2, 3/4
Temperature
F (C)
Working Pressure
psig (bar)
40 (40)
70 (20)
100 (37)
150 (65)
200 (93)
350 (24.1)
350 (24.1)
315 (21.7)
210 (14.4)
100 (6.8)
300 (20.6)
300 (20.6)
270 (18.6)
180 (12.4)
80 (5.5)
Pressure-Temperature Ratings
Ratings maintain a minimum factor of
4:1 between working pressure and
minimum burst pressure.
Multipurpose Push-On Hose End Connections
Select a basic ordering number and add SS for 316 SS or
B for brass.
Example: SS-PB4-SL4
To determine the length to cut bulk hose for field assembly,
subtract dimension B for each end connection from the desired
overall assembly length.
Dimensions are for reference only and are subject to change.
18 Hose
A
B
Swagelok Tube Fittings
Fitting
Size
in.
1/4
Dimensions
in. (mm)
3/8
Maximum
Outside
Dimension,
Hex Flat
9/16 in.
1/2 7/8 in.
1.97 (50.0)
3/4 in.
Basic
Ordering
Number
1/4
3/8
1/2
-PB4-SL4
-PB6-SL6
-PB8-SL8
Nominal
Hose
Size
in.
1.21 (30.7)
1.24 (31.5)
1.42 (36.1)
2.11 (53.6)
2.47 (62.7)
Tube Adapters
Tube
OD
1/4
Basic
Ordering
Number A
-PB4-TA4 1.93 (49.0)
Maximum
Outside
Diameter
3/4
1/2 -PB8-TA8
-PB12-TA12
2.47 (62.7)
3.14 (79.8)
Dimensions, in. (mm)
Dimensions, mm (in.)
6
10
12
-PB4-TM6
-PB6-TM10
-PB8-TM12
49.0 (1.93)
51.6 (2.03)
62.7 (2.47)
B
Nominal
Hose
Size
1/4
3/8
1/2
3/4
1/4 in.
8
1/2 in.
-PB6-TA6
-PB4-TM8
2.03 (51.6)
1.17 (29.7)
1.16 (29.5)
1.42 (36.1)
1.48 (37.6)
29.7 (1.17)
29.5 (1.16)
36.1 (1.42)
3/8
18
-PB6-TM8
-PB12-TM18
3/8 in.
3/4 in.
48.8 (1.92)
52.1 (2.05)
79.8 (3.14)
29.5 (1.16)
30.0 (1.18)
37.6 (1.48)
Pipe
Size
in.
1/4
A
3/8
1.80 (45.7)
Maximum
Outside
Diameter
in. (mm)
1/2 2.19 (55.6)
1.68 (42.7)
Basic
Ordering
Number
1/4
1/2
-PB4-PM4
-PB6-PM6
-PB8-PM8
B
Nominal
Hose
Size
in.
0.92 (23.4)
0.93 (23.6)
1.14 (29.0)
Dimensions
in. (mm)
Male NPT
3/8
-PB6-PM4
Male BSP/ISO Tapered
1/4
3/8
1/2
1/4
3/8
1/2
-PB4-MT4
-PB6-MT6
-PB8-MT8
1.68 (42.7)
1.80 (45.7)
2.19 (55.6)
0.92 (23.4)
0.93 (23.6)
1.14 (29.0)
Male Pipe Threads
3/4
3/4
3/4
3/4
-PB12-PM12
-PB12-MT12
2.81 (71.4) 1.15 (29.2)
2.81 (71.4) 1.15 (29.2)
Dimensions shown with Swagelok nuts finger-tight.
0.68 (17.3)
0.84 (21.3)
0.99 (25.1)
1.27 (32.3)
17.3 (0.68)
21.3 (0.84)
25.1 (0.99)
32.3 (1.27)
0.68 (17.3)
0.84 (21.3)
0.99 (25.1)
1.27 (32.3)
0.68 (17.3)
0.84 (21.3)
0.99 (25.1)
1.27 (32.3)
A B
Polyethylene
finishing cap
Hose 19
Unions
A
Maximum
Outside
Diameter
in. (mm)
Basic
Ordering
Number B
Nominal
Hose
Size
in.
Dimensions
in. (mm)
1/4
3/8
1/2
-PB4-6
-PB6-6
-PB8-6
2.07 (52.6)
2.25 (57.2)
2.61 (66.3)
0.55 (14.0)
0.51 (13.0)
3/4 -PB12-6 3.83 (97.3)
Hose Cutter
For use with push-on hose or soft
plastic tubing.
Ordering number: MS-HC-SC
Tools
0.68 (17.3)
0.84 (21.3)
0.99 (25.1)
1.27 (32.3)
Multipurpose Push-On Hose Assembly
Multipurpose Push-On Hose Disassembly
2. Cover first barb of end
connection with hose.
(Lubricating fitting stem
with light oil [10W40] may
ease assembly.)
3. Hold end connection
against flat surface. Grip
hose and push with a
steady force until hose
seats into blue finishing
cap.
Do not use a hose
clamp.
1. Slit hose lengthwise from
blue finishing cap to end
of barb. Do not damage
barbs.
2. Bend hose to expose
barbs, then remove hose
with a quick pull.
1. Cut a clean, square edge
on end of hose.
Ensure hose is pushed
fully into finishing cap.
See Custom Assemblies, next page, for assembled hoses.
Do not reuse hose.
Assembly and disassembly illustrated
with old-style, round-body Swagelok
tube adapter end connections.
20 Hose
Nominal Hose Size
4 = 1/4 in.
6 = 3/8 in.
8 = 1/2 in.
12 = 3/4 in.
S S - P B 4 T A 4 T A 4 - 2 8 or 7 1 C M - BK
1st 2nd
End Connections
Hose Series
PB
End Connection Material
SS = 316 stainless steel
B = Brass
Multipurpose Push-On Hose Custom Assemblies
Typical Ordering Number
Build a hose assembly ordering number by combining the designators in the sequence shown below.
Type
SL = Fractional Swagelok tube fitting
SM = Metric Swagelok tube fitting
TA = Fractional tube adapter
TM = Metric tube adapter
PM = Male NPT
MT = Male BSP/ISO tapered thread
See End Connections tables for fitting
dimensions.
Size
Fractional
4 = 1/4 in.
6 = 3/8 in.
8 = 1/2 in.
12 = 3/4 in.
Hose Color
No designator
= blue
-BK = Black
-GR = Green
-GY = Gray
-RD = Red
-YW = Yellow
Metric
6 = 6 mm
8 = 8 mm
10 = 10 mm
12 = 12 mm
18 = 18 mm
Must be in whole
number increments.
in. cm
Overall Length
Hose 21
Features
I Stainless steel and carbon steel end connections are
available in 1/4 to 1 in. and 6 to 22 mm sizes.
I Polyurethane cover resists abrasion and does not postcure.
Nylon Core Hose (7R and 8R Series)
I Nylon core tube is designed for use with petroleum-based
and synthetic hydraulic fluids.
I Black polyurethane cover is perforated to prevent blistering.
Technical Data
Thermoplastic Hose (7R, 8R, 7N, and 7P Series)
Fiber reinforcement
Nonconductive Nylon Core Hose (7N Series)
I Nylon core tube is designed for use with petroleum-based
and synthetic hydraulic fluids.
I Hose passes electrical conductivity test of SAE J343/
SAE J517 100R7. Hose is not intended for exposure to
continuous electrical current.
I Orange polyurethane nonperforated cover helps prevent
moisture from entering the hose.
Polyethylene Core Hose (7P Series)
I Polyethylene core tube complies with FDA regulation 21CFR
Part 177.1520 and NSF Standard 51 for contact with water,
food, and beverages.
I Cover is nonperforated blue polyurethane.
Polyurethane cover Core tube
Cleaning and Packaging
Swagelok thermoplastic hose components are cleaned in
accordance with Swagelok standard cleaning and packaging
specification (SC-10). Each hose is bagged individually and
boxed; longer hoses are coiled, bagged, and boxed.
Caution:
Nonconductive hoses can be conduits for electricity if
they contain conductive fluids. Verify fluid conductive
properties prior to use.
Nonperforated covers may blister in gas service.
User must evaluate compatibility in systems
containing heated, water-based fluidssome
conditions may affect the nylon core.
2250 (155)
Minimum
Bend Radius

in. (cm)
Temperature
Range

F (C)
Working
Pressure at
70F (20C)
psig (bar)
Minimum
Burst Pressure
at 70F (20C)
psig (bar)
1.25 (3.18)
40 to 200
(40 to 93)
2750 (189) 11 000 (757)
2.00 (5.08)
3.00 (7.62)
1.25 (3.18)
2.00 (5.08)
2250 (155) 9 000 (620)
2000 (137) 8 000 (551)
2750 (189) 11 000 (757)
9 000 (620)
3.00 (7.62)
5.00 (12.7)
8.00 (20.3)
2000 (137)
1500 (103)
1500 (103)
8 000 (551)
6 000 (413)
6 000 (413)
2.00 (5.08)
3.00 (7.62)
2.00 (5.08)
2.50 (6.35)
4.00 (10.2)
6.50 (16.5)
10.0 (25.4)
1.25 (3.18)
10 to 150
(23 to 65)
2250 (155)
2000 (137)
5000 (344)
4000 (275)
3500 (241)
2250 (155)
2000 (137)
2750 (189)
9 000 (620)
8 000 (551)
20 000 (1378)
16 000 (1102)
14 000 (964)
9 000 (620)
8 000 (551)
11 000 (757)
Nominal
Hose Size
in. (mm)
1/4 (6.4)
3/8 (9.7)
1/2 (12.7)
1/4 (6.4)
3/8 (9.7)
1/2 (12.7)
3/4 (19.0)
1 (25.4)
1/4 (6.4)
3/8 (9.7)
1/2 (12.7)
1/4 (6.4)
3/8 (9.7)
1/2 (12.7)
3/4 (19.0)
1 (25.4)
Specification
SAE J517
100R7
SAE J517
100R8
SAE J517
100R7
(nonconductive)

Nylon core
hose
(7R series)
Nylon core
hose
(8R series)
Nonconductive
nylon core hose
(7N series)
Polyethylene
core hose
(7P series)
Description
40 to 200
(40 to 93)
Measured to inside of bend.
For additional pressure-temperature data, contact your authorized Swagelok representative.
22 Hose
Ordering Information and Dimensions
Bulk Thermoplastic Hose
Select an ordering number.
Fitting
Size
1/4
A
3/8
Maximum
Outside
Dimension,
Hex Flat
11/16
1/2 15/16
2.60 (66.0)
3/4
Dimensions, in. (mm)
Dimensions, mm (in.)
6
8
10
12
11/16 in.
3/4 in.
15/16 in.
66.0 (2.60)
66.3 (2.61)
72.6 (2.86)
83.8 (3.30)
Swagelok Tube Fittings
Tube Adapters
Tube
OD
1/4
Basic
Ordering
Number A
-TP4-TA4
2.49 (63.2)
3/8
-TP4-TA6
Maximum
Outside
Dimension,
Hex Flat
11/16
3/4
1/2 -TP8-TA8
-TP12-TA12
15/16
1 1/8
3.35 (85.1)
3.65 (92.7)
Dimensions, in. (mm)
1 -TP16-TA16 4.43 (113)
Dimensions, mm (in.)
6
10
12
-TP4-TM6
-TP6-TM10
-TP8-TM12
11/16 in. 63.2 (2.49)
71.4 (2.81)
85.1 (3.35) 15/16 in.
3/4 in.
Reel
Length
ft (m)
250 (76)
250 (76)
Ordering
Number
7R-4
7R-6
7R-8
8R-4
8R-6
8R-8
8R-12
8R-16
Hose
Series
7R
8R
125 (38)
50 (15)
Reel
Length
ft (m)
250 (76)
250 (76)
Ordering
Number
7N-4
7N-6
7N-8
7P-4
7P-6
7P-8
7P-12
7P-16
Hose
Series
7N
7P
125 (38)
50 (15)
Thermoplastic Hose End Connections
Select an ordering number and add SS for 316 stainless steel
or S for carbon steel. Example: SS-TP4-TA4
For field assembly, also select the corresponding pusher and
die ordering numbers. Examples: MS-P-TA4 and MS-7R8R-4
To determine the length to cut bulk hose for field assembly,
subtract dimension B for each end connection from the desired
overall assembly length.
B
Nominal
Hose
Size
1/4
3/8
1/2
3/4
1
5/8
1/4 in.
8
3/8 in.
1/2 in.
-TP6-TA6
-TP8-TA10
-TP4-TM8
3/4 2.81 (71.4)
1.43 (36.3)
1.50 (38.1)
1.79 (45.5)
1.89 (48.0)
2.18 (55.4)
36.3 (1.43)
38.1 (1.50)
45.5 (1.79)
Basic
Ordering
Number
1/4
3/8
1/2
1/4 in.
3/8 in.
1/2 in.
-TP4-SL4
-TP6-SL6
-TP8-SL8
-TP4-SM6
-TP4-SM8
-TP4-SM10
-TP6-SM10
-TP8-SM12
B
Nominal
Hose
Size
74.9 (2.95)
1.54 (39.1)
1.63 (41.4)
1.72 (43.7)
39.1 (1.54)
39.4 (1.55)
45.7 (1.80)
41.7 (1.64)
44.2 (1.74)
A
B
Pusher
Ordering
Number
Die
Ordering
Number
MS-P-TA4
MS-P-4TA6
MS-P-TA6
MS-P-SLTA8
MS-P-8TA10
MS-P-TA12
MS-P-TA16
MS-7R8R-4
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
MS-7R8R-8
MS-8R-12
MS-8R-16
MS-P-TA4
MS-P-4TM8
MS-P-TA6
MS-P-SLTA8
MS-7R8R-4
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
Pusher
Ordering
Number
Die
Ordering
Number
MS-P-SL4
MS-P-SL6
MS-P-SLTA8
MS-P-SL4
MS-P-4SM8
MS-P-4SM10
MS-P-SL6
MS-P-SLTA8
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
MS-7R8R-4
MS-7R8R-4
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
2.94 (74.7)
3.30 (83.8)
Dimensions shown with Swagelok nuts finger-tight.
Nominal
Hose
Size, in.
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1
Nominal
Hose
Size, in.
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
Coils of nominal hose sizes smaller than 1 in. may
contain more than one piece of hose.
Dimensions are for reference only and are subject to change.
1 3/8
Hose 23
60
60Male Cone,
Female Swivel
(BSP/ISO Parallel Thread)
30Female Cone,
Female Swivel
(BSP/ISO Parallel Thread)
37
60
30
Female JIC (AN) 37,
Female Swivel
Fitting
Size
in.
1/4
A
3/8 3.03 (77.0)
Maximum
Outside
Dimension,
Hex Flat
11/16 in.
1/2 15/16 in. 3.34 (84.8)
2.65 (67.3)
3/4 in.
Basic
Ordering
Number
1/4
3/8
1/2
-TP4-AS4
-TP6-AS6
-TP8-AS8
B
Nominal
Hose
Size
in.
1.59 (40.4)
1.71 (43.4)
1.77 (45.0)
Dimensions

in. (mm)
Male Pipe Threads
Fitting
Size
in.
1/4
A
3/8 2.87 (72.9)
Maximum
Outside
Dimension,
Hex Flat
3/4 in.
1/2 1 1/16 in. 3.23 (82.0)
2.48 (63.0)
7/8 in.
Basic
Ordering
Number
1/4
3/8
1/2
-TP4-BM4
-TP6-BM6
-TP8-BM8
B
Nominal
Hose
Size
in.
1.42 (36.1)
1.57 (39.9)
1.67 (42.4)
Dimensions

in. (mm)
Fitting
Size
in.
1/4
A
3/8 3.00 (76.2)
Maximum
Outside
Dimension,
Hex Flat
3/4 in.
1/2 1 1/16 in. 3.38 (85.9)
2.59 (65.8)
7/8 in.
Basic
Ordering
Number
1/4
3/8
1/2
-TP4-BS4
-TP6-BS6
-TP8-BS8
B
Nominal
Hose
Size
in.
1.53 (38.9)
1.69 (42.9)
1.81 (46.0)
Dimensions

in. (mm)
Pipe
Size
in.
1/4
A
3/8
2.65 (67.3)
Maximum
Outside
Dimension,
Hex Flat
11/16 in.
1/2 15/16 in. 3.09 (78.5)
2.31 (58.7)
Basic
Ordering
Number
1/4
1/2
-TP4-PM4
-TP6-PM6
-TP8-PM8
B
Nominal
Hose
Size
in.
1.25 (31.8)
1.34 (34.0)
1.53 (38.9)
Dimensions
in. (mm)
Male NPT
3/8
-TP6-PM4
3/4 in.
Male BSP/ISO Tapered
1/4
3/8
1/2
1/4
3/8
1/2
-TP4-MT4
-TP6-MT6
-TP8-MT8
11/16 in.
3/4 in.
15/16 in.
2.31 (58.7)
2.65 (67.3)
3.09 (78.5)
1.25 (31.8)
1.34 (34.0)
1.53 (38.9)
Male BSP/ISO Parallel
1/4
3/8
1/2
1/4
3/8
1/2
-TP4-MS4
-TP6-MS6
-TP8-MS8
11/16 in.
3/4 in.
1 1/16 in.
2.56 (65.0)
2.69 (68.3)
3.00 (76.2)
1.50 (38.1)
1.38 (35.1)
1.44 (36.6)
Pusher
Ordering
Number
Die
Ordering
Number
MS-P-AS4
MS-P-AS6
MS-7R8R-8
MS-7R8R-6
MS-7R8R-4
MS-P-AS8
Pusher
Ordering
Number
Die
Ordering
Number
MS-P-BM4
MS-P-BM6
MS-P-BM8
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
Pusher
Ordering
Number
Die
Ordering
Number
MS-P-BS4
MS-P-BS6
MS-P-BS8
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
Pusher
Ordering
Number
Die
Ordering
Number
MS-P-PM4
MS-P-PM4
MS-P-PM6
MS-P-PM6
MS-P-PM8
MS-P-PM6
MS-P-PM8
MS-P-MS4
MS-P-MS6
MS-P-MS8
MS-7R8R-4
MS-7R8R-6
MS-7R8R-6
MS-7R8R-8
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
Measured with swivel nut pulled toward hex.
Measured with swivel nut pulled toward hex.
Measured with swivel nut pulled toward hex.
See next page for more end connections.
24 Hose
Nominal Hose Size
4 = 1/4 in.
6 = 3/8 in.
8 = 1/2 in.
12 = 3/4 in.
16 = 1 in.
Universal Globe Seal,
Metric Female Swivel Nut
Fitting
Size
mm
14
A
18 2.77 (70.4)
Maximum
Outside
Dimension,
Hex Flat
3/4 in.
22 11/16 in. 3.08 (78.2)
2.41 (61.2)
7/8 in.
Basic
Ordering
Number
1/4
1/2
-TP4-MC14
-TP6-MC18
-TP8-MC22
B
Nominal
Hose
Size
in.
1.35 (34.3)
1.46 (37.1)
1.52 (38.6)
Dimensions

in. (mm)
Pusher
Ordering
Number
Die
Ordering
Number
MS-P-MC14
MS-P-MC18
MS-P-MC22
MS-7R8R-4
MS-7R8R-6
MS-7R8R-8
3/8
Measured with swivel nut pulled toward hex.
S S - 7 R 4 T A 4 T A 4 - 2 8 or 7 1 C M
1st 2nd
End Connections
Hose Series
7R = SAE 100R7
8R = SAE 100R8
7N = SAE 100R7
(nonconductive)
7P = Polyethylene core
End Connection Material
SS = 316 stainless steel
S = Carbon steel
Custom Thermoplastic Hose Assemblies
Typical Ordering Number
Build a hose assembly ordering number by combining the designators in the sequence shown below.
Type
TA = Fractional tube adapter
TM = Metric tube adapter
SL = Fractional Swagelok tube fitting
SM = Metric Swagelok tube fitting
PM = Male NPT
MT = Male BSP/ISO tapered thread
MS = Male BSP/ISO parallel thread
AS = JIC (AN) 37flare, female swivel
BM = 60male cone, female swivel
nut (BSP/ISO parallel thread)
BS = 30female cone, female swivel
nut (BSP/ISO parallel thread)
MC = Universal globe seal with metric
female swivel nut
See End Connections tables for fitting
dimensions.
Size
Fractional
4 = 1/4 in.
6 = 3/8 in.
8 = 1/2 in.
12 = 3/4 in.
16 = 1 in.
Metric
6 = 6 mm
8 = 8 mm
10 = 10 mm
12 = 12 mm
18 = 18 mm
22 = 22 mm
Must be in whole
number increments.
in. cm
Overall Length
Hose 25
Power Swager
I Assembles 1/4 to 1 in. and
6 to 22 mm end connections.
I Is ready to use; instructions
included.
I Opens and closes dies
automatically.
I Can be bench mounted.
I Height: 30 in. (76 cm)
Width: 19 in. (48 cm)
Depth: 28 in. (71 cm)
Weight: approximately 140 lb
(64 kg)
Motor: Single-phase 1 hp,
60 Hz, 115/208/230 V.
Ordering number: MS-PSR-110
Assembly Tools
Dies
See End
Connections
tables for ordering
numbers.
Pushers
See End
Connections
tables for ordering
numbers.
Hand Cutter
Ordering number:
MS-HC-SC-1
Depth Insertion Gauges
Ordering numbers:
MS-IGB-1 for hose
size designators
4, 6, and 8
MS-IGB-2 for hose
size designators
12 and 16.
Vise Blocks
Ordering numbers:
MS-VB-1 for hose
size designators
4, 6, and 8
MS-VB-2 for hose
size designators
12 and 16.
Lubricant
Ordering number:
MS-TP-LUBE
Case
Can accommodate hand swager and
other tools and accessories.
Ordering number: MS-HSR-CASE
Hand Swager
I Assembles 1/4 to 1 in. and 6 to 22 mm
end connections.
I Is constructed of rugged, die-cast
aluminum.
I Can be bench mounted.
I Weight: approximately 8 lb (3.6 kg).
Ordering number: MS-HSR
302 Stainless Steel Spring Guards
Hose-Length Spring Guard
I covers entire hose to
protect against kinking
and abrasion.
To order, add S to a hose assembly ordering number.
Example: SS-7R4TA4TA4-28S
6 in. Long Spring Guard
I protects ends of hose.
To order, add S2 to the
hose assembly ordering
number.
Example: SS-7R4TA4TA4-28S2
For hose size designators 4 and 6.
Acryl-Saturated Fiberglass Cover
I resists abrasion and UV light.
To order, add F1 to a hose assembly
ordering number.
Example: SS-7R4TA4TA4-28F1
Silicone-Coated Fiberglass Cover
I maintains flexibility down to 65F
(53C).
To order, add F to a hose assembly
ordering number.
Example: SS-7R4TA4TA4-28F
Options and Accessories
Options and accessories do not change hose technical data. Hose operating parameters must be considered when selecting a cover.
26 Hose
Polyurethane cover Electrically conductive core tube
Fiber reinforcement 302 SS spring guard 316 SS end
connections
Features
I Single, twin, and vent hoses are available in custom lengths.
I Stainless steel end connections are available in 1/4 and
3/8 in. and 8 and 10 mm sizes.
I Electrically conductive core tube and 316 SS end
connections maintain electrical continuity while in use.
I Polyurethane cover resists abrasion.
I Blue stripe provides easily visible indicator of conductive
core tube hose, differentiating it from other Swagelok
thermoplastic hose.
Conductive Core Hose
Technical Data
Hose
Series
Inside
Diameter
in. (mm)
Minimum
Bend Radius

in. (cm)
Temperature
Range

F (C)
Working
Pressure
at 70F (20C)
psig (bar)
Minimum Burst
Pressure
at 70F (20C)
psig (bar)
NGS
0.26 (6.6) 2.00 (5.08)
5000 (344) 20 000 (1378)
3/8 (9.7)
NGT
NGV
3/8 (9.7)
0.26 (6.6)
3/8 (9.7)
Fill 0.26 (6.6)
Vent 0.26 (6.6)
2.00 (5.08)
2.00 (5.08)
40 to 150
(40 to 65)
Fill and vent
20 000 (1378)
Fill 20 000 (1378)
Vent 6 000 (413)
Nominal
Hose Size
in. (mm)
1/4 (6.4)
4.00 (10.2)
1/4 (6.4)
4.00 (10.2)
1/4 (6.4)
4.00 (10.2)
Hose
Style
Single
Twin
Vent

Measured to inside of bend.

For additional pressure-temperature data, contact your authorized Swagelok representative.
Low-pressure vent line does not have conductive core tube.
Testing
Every Swagelok conductive core hose assembly is factory
tested for electrical conductivity.
Cleaning and Packaging
Swagelok conductive core hose components are cleaned in
accordance with Swagelok standard cleaning and packaging
specification (SC-10). Each hose is bagged individually and
boxed; longer hoses are coiled, bagged, and boxed.
Warning:
All equipment must be properly grounded to prevent
static sparking.
Spring guards must be firmly attached to couplings on
both ends of hose.
Electrical resistance must not exceed 5 M.
0.38 (9.7)
0.38 (9.7)
Fill 0.38 (9.7)
Vent 0.26 (6.6)
Fill and vent
5000 (344)
Fill 5000 (344)
Vent 1500 (103)
Single hose
Twin hose (high-pressure vent)
Vent hose (low-pressure vent)
Hose 27
End Connection Material
316 stainless steel
S S - N G T 4 - A C A C - 2 8 - N 5 D 8
Nominal Fill Hose Size
4 = 1/4 in.
6 = 3/8 in.
Hose Series
NGS = Single hose
NGT = Twin hose
NGV = Vent hose
Ordering Information
Dimensions are for reference only and are subject to change.
Conductive Core Hose Custom Assemblies
Typical Ordering Number
Build a hose assembly ordering number by combining the designators in the sequence shown below.
Positive
Vent Hose
1 = 2 in.
2 = 4 in.
3 = 6 in.
4 = 8 in.
5 = 10 in.
6 = 12 in.
7 = 15 in.
8 = 18 in.
9 = 21 in.
0 = 24 in.
Negative
Vent Hose
A = 2 in.
B = 4 in.
C = 6 in.
D = 8 in.
E = 10 in.
F = 12 in.
G = 15 in.
H = 18 in.
J = 21 in.
K = 24 in.
X = None See tables below.
Conductive core hose is supplied with a spring guard at each end connection. Spring guards may be omitted for static
nondispensing applications. To order hose without spring guards, replace the dash following the fill hose overall length designator
with X.
Example: SS-NGT4-ACAC-28XN5D8
Fill Hose
Overall
Length, in.
Must be in
whole number
increments.
Nozzle Dispenser
End Connections
Fitting
Size
1/4
A
3/8
Maximum
Outside
Dimension,
Hex Flat
11/16 2.60 (66.0)
3/4
Dimensions, in. (mm)
Dimensions, mm (in.)
8 66.3 (2.61)
1/4
3/8
1/4 in.
3/8 in.
Nominal
Hose Size
74.9 (2.95)
2.94 (74.7)
Swagelok Tube Fittings
10
End
Connection
Designator
C
D
G
H
11/16 in.
3/4 in.
A
See next page for more end connections.
Vent Hose
Extension Lengths
(NGT or NGV Series)
N = Nozzle side
D = Dispenser side
Fill Vent
(NGT or
NGV
Series)
Nozzle Dispenser
Tube
OD
1/4
A
2.49 (63.2)
3/8
Maximum
Outside
Dimension,
Hex Flat
11/16
Dimensions, in. (mm)
Dimensions, mm (in.)
10 71.4 (2.81) 3/4 in.
Nominal
Hose Size
1/4
3/8
1/4 in. 8
3/8 in.
3/4 2.81 (71.4)
Pipe
Size
in.
1/4
A
in. (mm)
3/8
Maximum
Outside
Dimension,
Hex Flat
11/16 in. 2.31 (58.7) 1/4
3/8
Nominal
Hose Size
in.
Male NPT
Male BSP/ISO Tapered
1/4
3/8
1/4
3/8
11/16 in.
3/4 in.
2.31 (58.7)
2.65 (67.3)
Tube Adapters
Male Pipe Threads
End
Connection
Designator
B
A
A
E
F
End
Connection
Designator
M
N
K
L
11/16 in.
3/4 in. 2.65 (67.3)
63.2 (2.49)
Options and Accessories
Nozzle End Components
Kit contains vent tube, cover plate,
and label.
Ordering number: NG-COVER-KIT
Cover plate
Vent tube
Swagelok 83 series ball
valvesold separately
Cover Plate,
Label
Vent Tube
Complete Assembly
See NAHAD ASC 001.01, Flexible Metal Hose Assembly
Standard, for common hose routing guidelines.
Swagelok, VCO, VCRTM Swagelok Company
2002, 2004, 2005 Swagelok Company
Printed in U.S.A., MIG
April 2005, R3
MS-01-167
Safe Product Selection
When selecting a product, the total system design must
be considered to ensure safe, trouble-free performance.
Function, material compatibility, adequate ratings,
proper installation, operation, and maintenance are the
responsibilities of the system designer and user.
Caution: Do not mix or interchange parts with those of
other manufacturers.
See SAE J1273, Recommended Practices for Hydraulic Hose
Assemblies, for information on installation and use of hose.