Accessories

Autoclave Engineers offers a complete selection of accessories to complete your system requirements. Components such as thermocouples are used for monitoring and controlling temperatures, up to 100,000 psi (6895 bar). Safety head assemblies are used to protect systems and pressure vessels from over-pressure conditions. Rupture discs are available in various pressure ranges and material options suitable for the application. Pressure gauges are used to monitor and control pressure. Pressure gauges are available in two sizes, 4 1/2 and 6 (114.3 mm and 152.4 mm), and ranges from 0 to 80,000 psi (0 to 5116 bar). Optional electrical contact faces for pressure control are used to set high and low limits. Gauges are standard panel mount or can be ush mounted with an optional ush mount kit. Accessories are also available as specials or non-standard items. Contact your local sales representative for more information.

Accessories

www.autoclaveengineers.com

Accessories -

Pencil-type Thermocouples

Pressures to 15,000 psi (1034 bar)

Thermocouples provide reliable temperature measurement within a uid system. The design permits installation of the element in direct contact with the uid stream, thereby providing reliable temperature measurement. The quick-connector affords system exibility. The thermocouple tip has a grounded-type junction.

Materials
Precision-molded plastic connectors have heavy duty, springloaded jack inserts for positive contact. The sheath is type 316 stainless steel with 316 SS ferrule and gland. We offer a choice of iron contantan (J) or chromel-alumel (K) type elements (please specify when ordering). Basic assembly includes 1/8 Autoclave Speedbite connection with adapters for other connection sizes.

Pressure/Temperature Ratings
Ratings to 15,000 psi (1034 bar) maximum working pressure. Temperatures at thermocouple tip can range to 1,200F (649C) (SpeedBite connection not recommended below 0F (-17.8C) or above 650F (343C).)

Ordering Information
Catalog order numbers in the table refer to the complete assembly. Add sufxJ for iron constantan element or K for chromel-alumel. To order a basic thermocouple with plug/jack assembly and connection (without through or angle block), change last digit in order number to 0 and specify sheath length if different from standard 3.62 (91.94 mm) length. Ordering examples: TP4400K 6 (152.4 mm) denotes basic thermocouple to t into a 1/4 Autoclave SpeedBite connection with chromel-alumel element and 6 (152.4 mm) sheath. TP 4401K denotes the above unit complete with through-type block and standard 3.62 (91.94 mm) sheath.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Accessories Catalog Number Fits Connection Type

Pencil-type Thermocouples
Tubing Size Inches (mm) Dimensions - inches (mm) A B C D E H Block Thickness Fitting Pattern

Through-Type
TP2201 TP4401 TP6601 TP8801 W125 SW250 SW375 SW500 1/8 (3.18) 1/4 (6.35) 3/8 (9.52) 1/2 (12.70) 1.38 (35.05) 1.75 (44.45) 2.00 (50.80) 2.50 (63.50) 0.69 (17.53) 0.88 (22.35) 1.00 (25.40) 1.25 (31.75) 0.31 (7.87) 0.44 (11.18) 0.53 (13.46) 0.53 (13.46) 3.62 (91.95) 3.62 (91.95) 3.62 (91.95) 3.62 (91.95) 1.00 (25.40) 1.19 (30.23) 1.38 (35.05) 1.75 (44.45) 7.18 (182.37) 7.25 (184.15) 7.31 (185.67) 7.44 (188.98) 0.50 (12.70) 0.62 (15.75) 0.75 (19.05) 1.00 (25.40)

See Figure 1

Angle-Type
TP2202 TP4402 TP6602 TP8802 W125 SW250 SW375 SW500 1/8 (3.18) 1/4 (6.35) 3/8 (9.52) 1/2 (12.70) 1.00 (25.40) 1.19 (30.23) 1.38 (35.05) 1.75 (44.45) 0.75 (19.05) 0.88 (22.35) 1.00 (25.40) 1.25 (31.75) 0.31 (7.87) 0.44 (11.18) 0.53 (13.46) 0.53 (13.46) 3.62 (91.95) 3.62 (91.95) 3.62 (91.95) 3.62 (91.95) 1.38 (35.05) 1.75 (44.45) 2.00 (50.80) 2.50 (63.50) 7.62 (193.55) 7.81 (198.37) 7.94 (201.68) 8.19 (208.03) 0.50 (12.70) 0.62 (15.75) 0.75 (19.05) 1.00 (25.40)

See Figure 2

Note: All thermocouples are furnished complete with connection components unless otherwise specied. Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower.

All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. Consult your local representative.

Figure 1

Figure 2

C H D E B A
Through-Type
A

C D H

Angle-Type

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Accessories -

Sheath-type Thermocouples
Pressure/Temperature Rating Curve
70 (483)

Pressures to 60,000 psi (4137 bar)

Thermocouples provide reliable temperature measurement within a uid system. Similar to low pressure thermocouples, this design also permits direct temperature monitoring at any point in a uid system. The sheath type thermocouple features grounded junction and rapid response - 100 milliseconds or less at 63.3% of a step charge.
Maximum Working Pressure thousands psi (MPa)

60 (414) 50 (345) 40 (276) 30 (207) 20 (140) 10 (70)

Series TC

TC after 800F (427C) T Series TS TS after 800F (427C)

Temperature Rating
Rating to 2,000 F (1093C) at tip of thermocouple. (Refer to adjacent Pressure/Temperature chart for elevated temperatures.) Minimum operating temperature 0F (-17.8C)

Sheath Length
Differs for each size connection for optimum tip contact with uid stream.

200 (93)

400 (204)

600 (316)

800 (427)

1000 (538)

1200 (649)

Temperature at Connection: F (C)

Materials
Bodies heat-treated 15-5 PH SS. 316 sheath brazed into body with gold-nickel alloy brazing material. An aluminum terminal housing is threaded into the body for ready access to terminals. An o-ring seal provides moisture protection.

Standard collar and gland are cold worked 316 SS for use up to 1200F (649C). When cold worked 316 SS collar and gland are used, the physical properties are permanently altered after use above 800F (427C). CAUTION: While testing has shown O-rings to provide satisfactory service life, both cyclic and shelf life may vary widely with differing service conditions, properties of reactants, pressure and temperature cycling, and age of the O-ring. FREQUENT INSPECTION SHOULD BE MADE to detect any deterioration, and O-rings replaced as required. CAUTION: See appropriate pressure section in reference to proper selection of tubing.

Ordering Information
To order thermocouples for use in standard Autoclave tees or crosses, use order numbers listed in table. For custom length sheaths, to extend through a vessel wall or cover, calculate sheath length as follows: 1. Add vessel wall or cover thickness to the distance the sheath will extend into vessel. 2. When using a basic 1/4 Autoclave connection, subtract dimension M for proper sheath length to order. 3. For all other connection sizes, add dimension N to measurement obtained in step 1. 4. Order a custom length sheath by adding desired length in inches as sufx to order number.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Accessories Catalog Number Fits Connection Type

Sheath-type Thermocouples
Tubing Size Inches (mm) Dimensions - inches (mm) Element Type L M N H Fitting Pattern

Series TS 20,000 psi (1379 bar)

TSJ4 TSK4 TSJ6 TSK6 TSJ9 TSK9 TSJ12 TSK12 TSJ16 TSK16 SF250CX SF375CX SF562CX SF750CX SF1000CX 1/4 (3.18) 3/8 (9.52) 9/16 (14.28) 3/4 (19.05) 1 (25.4) iron constantan chromel-alumel iron constantan chromel-alumel iron constantan chromel-alumel iron constantan chromel-alumel iron constantan chromel-alumel 0.28 (7.11) 1.19 (30.23) 1.19 (30.23) 2.00 (50.80) 2.62 (66.55) 0.95 (24.13) 0.19 (4.83) 0.13 (3.30) 0.50 (12.70) 0.57 (14.48) 5.78 (146.81) 6.67 (166.88) 6.50 (165.10) 6.88 (174.75) 6.94 (176.28)

See Figure 1

Series TC 60,000 psi (4137 bar)

TCJ4 TCK4 TCJ6 TCK6 TCJ9 TCK9 F250C F375C F562C 1/4 (3.18) 3/8 (9.52) 9/16 (14.28) iron constantan chromel-alumel iron constantan chromel-alumel iron constantan chromel-alumel 0.38 (9.65) 1.38 (35.05) 1.62 (41.15) 0.50 (12.70) 0.32 (8.13) 0.25 (6.35) 5.88 (149.35) 6.69 (169.93) 6.62 (168.15)

See Figure 2

Note: All thermocouples are furnished complete with connection components unless otherwise specied. Basic assembly includes 1/4 connection with adapters for other O.D. tube sizes. Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower.

All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. Consult your local representative.

Figure 1
1.25" (31.75)

Figure 2

6.375" (161.93)

SHEATH DIAMETER 0.062" (1.57mm)

TOP FACE OF COVER TEE OR CROSS

H 3.75" (95.25) M
TOP FACE OF COVER TEE OR CROSS

N L
SHEATH DIAMETER 0.062" (1.57mm)

Series TS

Series TC

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Accessories -

Universal Safety Heads

Pressures to 110,000 psi (7584 bar)

Safety Heads/Rupture Discs - Safety Heads and Rupture Discs offer an economical and dependable relief port to guard against system over-pressure. Autoclave Engineers offers universal safety heads in three series compatible in orice size and maximum pressure rating with Autoclave Low Pressure, Medium Pressure and High Pressure valves, ttings and tubing. Autoclave Low Pressure Series SS: Autoclave SpeedBite Ermeto-type tube connection, maximum rupture pressures to 15,000 psi (1034 bar). Autoclave Medium Pressure Series SFCX: Autoclave Medium-Pressure coned-and-threaded tube connection, maximum rupture pressures to 20,000 psi (1379 bar). Autoclave High Pressure Series FC: Autoclave High Pressure coned-and-threaded tube connection, maximum rupture pressure to 110,000 psi (7584 bar). The 3/16F style features a 3/16 blow-out diameter and a at seat which can be ordered in pressure range from 200 to 27,000 psi (13.8 to 1862 bar). The 1/4A style features a 1/4 blow-out diameter and an angular seat which can be ordered in pressures from 900 to 60,000 psi (62 to 4137 bar). The 1/4F style features a 1/4 blow-out diameter and a at seat which is used for pressure above 60,000 psi (4137 bar). The 1/2F style features a 1/2 blow-out diameter and a at seat which can be ordered in pressures from 500 to 10,000 psi (35 to 690 bar).

Materials and Features

Non-rotating double-cone plug design avoids galling and scoring of safety head or connection during installation. Reduces likelihood of leakage. Interchangeable hold-down rings permit use of several different sizes and types of rupture discs in a single safety head. Accommodates discs with rupture pressures as low as 90 psi (6.2 bar) and ranging to 60,000 psi (4137 bar) and above. Install in any standard Autoclave coupling, elbow, cross or tee, directly into a pressure vessel. Cold-worked Type 316 SS body hold down gland and plug, all series. Hold down rings are corrossion resistant steel.
Consult Local Sales Representative for safety head assemblies rated above 60,000 psi (4137 bar).

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Ordering Information
To order an Autoclave Universal Safety Head, use the catalog order number from table. ADD THE SIZE OF THE RUPTURE DISC YOU WANT AS A SUFFIX TO THE CATALOG NUMBER; SUCH AS CS6600-1/4A. Then order desired rupture discs from rupture disc section. (This is important since the disc size determines which hold-down ring will be furnished with the safety head.) Hold-down nut torque values
Torque@ Minimum Pressure Ft. lb. psi (N.m) (bar) 20 (27.1) 40 (54.2) 20 (27.1) 5,000 (345) 4,000 (276) 4,000 (276) Torque@ Maximum Pressure Ft. lb. psi (N.m) (bar) 90 (122.0) 90 (122.0) 140 (189.8) 26,500 (1827) 10,000 (690) 60,000 (4137) Rupture Disc inches 3/16 Flat 1/2 Flat 1/4 Angle Hold-down Ring Part Number 101A-0439 1020-7434 102A-0439

Hold-down nut torque requirements vs. rupture disc burst pressure rating @ RT
Burst Pressure psi (bar) @ RT
60,000 (4137) 45,000 (3103) 30,000 (2068) 15,000 (1034)
Note: Inconel disc only 1/4 angle disc 3/16 flat disc 1/2 flat disc

30 (40.6)

60 (81.3)

120 90 (122.4) (162.7)

150 (203.3)

Torque ft.lb (N.m)

3/16 at seat disc cannot be used with safety head assemblies SS6600, SS8600 and CSX9600. Torque values for intermediate pressures may be linearily interpolated. Use minimum torque value for pressures lower than those shown.

1/2 Flat Disc illustrated in safety head

Hold-down Nut 3/8" NPT Hold-down Ring Rupture Connection Disc Plug

Body

3/16 Flat rupture disc

1/4 Angle rupture disc

Catalog Number Without Disc

Body Part Number

Plug Part Number

Hold-down Gland Fits Part Connection Number Type

Fitting Pressure Rating psi (bar)

Body Plug Torque Orice Ft.lb. (N.m) inches (mm)

Body Orice inches (mm)

Rupture Disc Size inches (mm) 3/16F Port E* 1/4A Port E* 1/2F Port E*

Dimensions inches (mm) C D

Low-Pressure
SS2600 SS4600 SS6600 SS8600 20107035 20207035 20307035 20407035 101A0434 102A0434 103A0434 104A0434
3/16 & 1/2 Flat 1040-7434 1/4 Angle 1030-0241

W125 SW250 SW375 SW500

15,000 (1034.2) 15,000 (1034.2) 15,000 (1034.2) 10,000 (690.0)

15 (20.3) 15 (20.3) 15 (20.3) 20 (22.1)

0.094 (2.39) 0.125 (3.18) 0.250 (6.35) 0.375 (9.53)

0.125 (3.15) 0.250 (6.35) 0.375 (9.53) 0.375 (9.53)

0.188 (4.78) 0.188 (4.78) NA NA

0.25 (6.35) 0.25 (6.35) 0.25 (6.35) 0.25 (6.35)

0.50 (12.7) 0.50 (12.7) 0.50 (12.7) 0.50 (12.7)

1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4)

1.12 (28.45) 1.12 (28.45) 1.12 (28.45) 1.12 (28.45)

Port E* - Minimum disc blow-out diameter of hold down ring Note: Interchangeable hold-down rings permit use of several different sizes and types of rupture disc in a single safety head. Series SS, CS, and CSX-1/4, 3/8 and 9/16 have stainless steel hold-down gland with tool steel hold-down ring.

Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

1/2 Flat Disc illustrated in safety head

Hold-down Nut 3/8" NPT Hold-down Ring Rupture Connection Disc Plug

Body

3/16 Flat rupture disc

1/4 Angle rupture disc

Catalog Number Without Disc

Body Part Number

Plug Part Number

Hold-down Gland Fits Part Connection Number Type

Fitting Pressure Rating psi (bar)

Body Plug Torque Orice Ft.lb. (N.m) inches (mm)

Body Orice inches (mm)

Rupture Disc Size inches (mm) 3/16F Port E* 1/4A Port E* 1/2F Port E*

Dimensions inches (mm) C D

Medium-Pressure
CSX4600 CSX6600 CSX9600 101A1731 102A1731 101A0438 20107823 20107844 102A0438
3/16 & 1/2 Flat 1040-7434 1/4 Angle 1030-0241

SF250CX SF375CX SF562CX

20,000 (1378.9) 20,000 (1378.9) 20,000 (1378.9)

15 (20.3) 20 (27.1) 30 (40.6)

0.094 (2.39) 0.171 (4.34) 0.312 (7.92)

0.141 (3.58) 0.250 (6.35) 0.375 (9.53)

0.188 (4.78) 0.188 (4.78) NA

0.25 (6.35) 0.25 (6.35) 0.25 (6.35)

0.50 (12.7) 0.50 (12.7) 0.50 (12.7)

1.00 (25.4) 1.00 (25.4) 1.00 (25.4)

2.19 (55.63) 2.19 (55.63) 2.19 (55.63)

High-Pressure
CS4600 CS6600 CS9600 40CS9600 20107036 20207036 20307036 20307036 10304877 10306096 10306097 101C7192
1/4 Angle 1030-0241 3/16 & 1/2 Flat 1040-7434

F250C F375C F562C F562C40

60,000 (4136.8) 60,000 (4136.8) 60,000 (4136.8) 40,000 (2757.9)

20 (2.8) 40 (5.5) 80 (11.1) 80 (11.1

0.082 (2.08) 0.125 (3.18) 0.188 (4.78) 0.250 (6.35)

0.125 (3.18) 0.219 (5.56) 0.281 (7.13) 0.281 (7.13)

0.188 (4.78) 0.188 (4.78) 0.188 (4.78) NA

0.25 (6.35) 0.25 (6.35) 0.25 (6.35) 0.25 (6.35)

0.50 (12.7) 0.50 (12.7) 0.50 (12.7) 0.50 (12.7)

1.00 (25.4) 1.00 (25.4) 1.19 (30.23) 1.19 (30.23)

2.25 (57.15) 2.25 (57.15) 2.25 (57.15) 2.25 (57.15)

Port E* - Minimum disc blow-out diameter of hold down ring Note: Interchangeable hold-down rings permit use of several different sizes and types of rupture disc in a single safety head. Series SS, CS, and CSX-1/4, 3/8 and 9/16 have stainless steel hold-down gland with tool steel hold-down ring.

Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Accessories -

Prebulged Rupture Discs

Ordering Information
Specify quantity, disc size, type, material and temperature. Indicate desired rupture rating which should be at least 110% of operating pressure. Manufacturing tolerances are +6% to -3% of nominal rating and will burst at 5% of furnished rating. Discs are rated at 72F (22C). Minimum order of 6 discs required for materials other than Inconel.
3/16" Dia. (4.76 mm)

3/16 F Ref. O.D. .375" (9.53 mm) 1/2 F Ref. O.D. .68" (17.3 mm)

1/4A Ref. O.D. .62" (15.7 mm)

See next page for standard part numbers.

Note: Inconel disc normally available from stock.

1/2" Dia. (12.7 mm)

1/4" Dia. (6.35 mm)

Flat Seat Rupture Disc

30 Angular Seat Rupture Disc

Disc Material

Disc Size Seat Type Inches 3/16 at

Rupture Pressures Standard Available Range 5% psi (bar) 220 to 1,750 (15.2 to 120.7) 160 to 2,000 (11.0 to 137.9) 90 to 1,000 (6.2 to 68.9) 500 to 4,500 (34.5 to 310.3) 360 to 6,000 (24.8 to 413.7) 190 to 1,700 (13.1 to 117.2) 3,000 to 65,000 (206.8 to 4481.5) 2,500 to 70,000 (172.4 to 4826.3) 1,300 to 11,500 (89.6 to 792.9) 770 to 20,000 (53.1 to 1378.9) 550 to 35,000 (37.9 to 2413.1) 300 to 7,500 (20.7 to 517.1) 960 to 20,000 (66.2 to 1378.9) 690 to 40,000 (47.6 to 2757.9) 375 to 7,500 (25.9 to 517.1) 1,250 to 20,000 (86.2 to 1378.9) 900 to 60,000 (62.1 to 4136.8) 500 to 10,000 (34.5 to 690.0) 1,750 to 20,000 (120.7 to 1378.9) 1,250 to 60,000 (86.2 to 4136.8) 700 to 10,000 (48.3 to 690.0)

Maximum Temperature Rating F (C) 250 (121) 250 (121) 250 (121) 250 (121) 250 (121) 250 (121) 1,000 (538) 1,000 (538) 1,000 (538) 750 (399) 750 (399) 750 (399) 800 (427) 800 (427) 800 (427) 900 (482) 900 (482) 900 (482) 900 (482) 900 (482) 900 (482)

Aluminum

1/4 angle 1/2 at 3/16 at

Silver

1/4 angle 1/2 at 3/16 at

Hastelloy C

1/4 angle 1/2 at 3/16 at

Nickel

1/4 angle 1/2 at 3/16 at

Monel

1/4 angle 1/2 at 3/16 at

Inconel (Standard)

1/4 angle 1/2 at 3/16 at

Type 316 Stainless Steel

1/4 angle 1/2 at

Teon coating available on one or both sides to increase minimum rupture rating. CAUTION: High pressure-to-rupture ratios, severe pressure or temperature cycling, corrosion and metal fatigue affect disc life and rupture pressure. Frequent disc replacement may be desirable to avoid premature rupture. Rupture disc manufacturers recommended a 140 to 170 percent margin on disc ratings for extended disc life.

All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Rupture Disc Stock Part List - 3/16 Flat Disc

Part Number Pressure Range (psi) 1940-2120 2231-2438 2910-3180 3201-3498 3880-4240 4365-4700 4850-5300 5141-5618 5335-5830 5626-6148 5723-6254 5820-6360 6014-6572 6111-6678 6305-6890 6790-7420 7275-7950 7760-8480 8245-9010 8730-9540 10185-11130 11155-12190 11640-12720 12125-13250 12610-13780 13095-14310 13580-14840 14065-15370 14550-15900 15035-16430 15520-16960 16005-17490 16975-18550 17945-19610 18430-20140 19885-21730 20370-22260 20885-22790 21340-23320 21825-23850 23280-25440 24250-26500 24735-27030 Pressure Range (bar) 134-146 154-168 201-219 221-241 268-292 301-324 334-365 355-387 368-402 388-424 395-431 401-439 415-453 421-460 435-475 468-512 502-548 535-585 568-621 602-658 702-767 769-840 803-877 836-914 869-950 903-987 936-1023 970-1060 1003-1096 1037-1133 1070-1169 1103-1206 1170-1279 1237-1352 1271-1389 1371-1498 1404-1535 1440-1571 1471-1608 1505-1644 1605-1754 1672-1827 1705-1864

Description

Material

P-7003 P-7674 P-7005 P-7007 P-7009 P-7011 P-7013 P-7015 P-7017 P-7018 P-7019 P-7020 P-7021 P-7022 P-7024 P-7026 P-7028 P-7030 P-7032 P-7034 P-7040 P-7044 P-7046 P-7048 P-7050 P-7052 P-7054 P-7056 P-7058 P-7060 P-7062 P-7064 P-7068 P-7072 P-7074 P-7080 P-7082 P-7084 P-7086 P-7088 P-7094 P-7096 P-7098

3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC 3/16F DISC

Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel

10

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Rupture Disc Stock Part List - 1/4 Angle Disc

Part Number Pressure Range (psi) 970-1060 1164-1272 1445-1590 1697-1855 1940-2120 2425-2650 2910-3180 3395-3710 3880-4240 4365-4770 4850-5300 5335-5830 5820-6360 6305-6890 6790-7420 7275-7950 7760-8480 8245-9010 8730-9540 9215-10070 9700-10600 10185-11130 10670-11660 11155-12190 11640-12720 12125-13250 12610-13780 13095-14310 13580-14840 14550-15900 15035-16430 15520-16960 16005-17490 16490-18020 16975-18550 17460-19080 17945-19610 18915-20670 19400-21200 19885-21730 21000-22000 21825-23850 24250-26500 Pressure Range (bar) 67-73 80-88 100-110 117-128 134-146 167-183 201-219 234-256 268-292 301-329 334-365 368-402 401-438 435-475 468-512 502-548 535-585 568-621 602-658 635-694 669-731 702-767 736-804 769-841 803-877 836-914 869-950 903-987 936-1023 1003-1096 1037-1133 1070-1169 1103-1206 1137-1242 1170-1279 1204-1315 1237-1352 1304-1425 1338-1462 1371-1498 1448-1517 1505-1644 1672-1827

Description

Material

P-7301 P-7303 P-7305 P-7307 P-7309 P-7311 P-7313 P-7315 P-7317 P-7319 P-7321 P-7323 P-7325 P-7327 P-7329 P-7331 P-7333 P-7335 P-7337 P-7339 P-7341 P-7343 P-7345 P-7347 P-7349 P-7351 P-7353 P-7355 P-7357 P-7361 P-7363 P-7365 P-7367 P-7369 P-7371 P-7373 P-7375 P-7377 P-7379 P-7381 P-7382 P-7383 P-7385

1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC

Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

11

Rupture Disc Stock Part List - 1/4 Angle Disc - cont

Part Number Pressure Range (psi) 25220-27560 26190-28620 27160-29680 29100-31800 30070-32860 31525-34450 33950-37100 36375-39750 38880-42400 41255-45050 43650-47700 48500-53000 53350-58300 58200-63600 62155-66000 65960-72080 68870-75260 Pressure Range (bar) 1739-1900 1806-1973 1873-2046 2006-2192 2073-2266 2174-2375 2341-2558 2508-2741 2681-2923 2844-3106 3010-3289 3344-3654 3678-4020 4013-4385 4285-4550 4548-4970 4748-5189

Description

Material

P-7387 P-7389 P-7391 P-7393 P-7395 P-7397 P-7399 P-7401 P-7403 P-7405 P-7407 P-7409 P-7411 P-7413 P-7415 P-7417 P-7419

1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC 1/4A DISC

Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel

12

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Rupture Disc Stock Part List - 1/2 Flat Disc

Part Number Pressure Range (psi) 485-530 679-742 727-795 873-954 970-1060 1006-1100 1164-1272 1213-1323 1358-1484 1455-1590 1552-1696 1697-1855 1746-1908 1940-2120 2183-2385 2271-2438 2425-2650 2619-2862 2716-2968 2910-3180 3104-3392 3395-3710 3589-3922 3637-3975 3880-4240 4365-4770 4462-4876 4850-5300 5335-5830 5626-6148 5820-6360 6305-6890 6790-7420 7275-7950 7760-8480 8245-9010 8730-9540 9700-10600 Pressure Range (bar) 33-37 47-51 50-55 60-73 67-75 69-76 80-88 84-91 94-102 100-110 107-117 117-128 120-132 134-146 151-164 157-168 167-183 181-197 187-204 201-219 214-234 234-256 247-270 251-274 268-292 301-329 308-336 334-365 368-402 388-424 401-438 435-475 468-512 502-548 535-585 568-621 602-658 669-731

Description

Material

P-7601 P-7603 P-7605 P-7607 P-7609 P-7610 P-7611 P-7613 P-7615 P-7617 P-7619 P-7621 P-7623 P-7625 P-7627 P-7629 P-7631 P-7633 P-7635 P-7637 P-7639 P-7641 P-7643 P-7645 P-7647 P-7649 P-7651 P-7653 P-7655 P-7657 P-7659 P-7661 P-7663 P-7665 P-7667 P-7669 P-7671 P-7673

1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC 1/2F DISC

Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel Inconel

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

13

Accessories -

Instrument Quality Pressure Gauges

Pressures to 80,000 psi (5116 bar)

Gauges - Pressure gauges are offered for use in low, medium and high pressure systems. Instrument quality gauges are available with pressure to 80,000 psi (5115.7 bar).

Materials and Features

Accuracy within 0.5% of full scale range. Plastic dial cover/solid front aluminum alloy case. Blow-out back panel for pressure relief in the event of Bourdon tube failure. 316 Stainless steel Bourdon tubes** Precision stainless steel movement for accuracy and resistance to atmospheric corrosion. Pointer zero adjustment located on front of gauge behind dial cover for convenience Gauges are commercially cleaned when shipped. Gauges available oxygen cleaned up to 20,000 psi (1379 bar) upon request. Gauges glycerin lled upon request. Gauges available with dual scale face plates.

Instrument quality gauges

Flush panel mounting - Interchangeable dial cover retaining rings are stocked to permit ush panel mounting of any instrument quality gauge. These will be furnished at an additional charge when specied - add PM to order number. Optional electrical contact face - Available for all instrument quality gauges. With adjustable low and high electrical contacts, this option permits gauges to provide pressure control for automatic or remote operation, or for fail-safe set points. **Bourdon tube material for 0-30,000 psi (0-2068 bar) gauge is K Monel. Bourdon tube material for 0-50,000 psi (0-3447 bar) and 0-80,000 psi (0-5116 bar) gauge is Inconel 718.

14

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

Note: Gauge connections are 1/4 (F250C) coned-and-threaded connection. Furnished with collar and gland.

Calibrated in psi Only

Catalog Number Pressure Range psi (bar) Minor Interval Value psi (bar) Dial Diameter inches (mm)

1.3 (33.0)

P-0499-CG P-0479-CG P-0480-CG P-0481-CG P-0482-CG P-0483-CG P-0487-CG

0-1,000 (0-69) 0-1,500 (0-103) 0-3,000 (0-207) 0-5,000 (0-345) 0-10,000 (0-690) 0-15,000 (0-1034) 0-20,000 (0-1379)

10 (.69) 10 (.69) 20 (1.38) 50 (3.44) 100 (6.89) 100 (6.89) 200 (13.79) 200 (13.79) 500 (34.47) 1,000 (68.94)

41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 41/2 (114.3) 6 (152.4) 6 (152.4) 6 (152.4)
Models P-0489-CG P-0490-CG Only 5.8 (147.2)

P-0488-CG** 0-30,000 (0-2068) P-0489-CG** 0-50,000 (0-3447) P-0490-CG** 0-80,000 (0-5116)

Optional Electrical Contact Face Catalog Number P-0713 P-0714 Fits Gauge Dial Diameter inches - (mm) 41/2 (114.3) 6 (152.4)
"B" D IAME TER

120 TYPICAL

**Bourdon tube material for 0-30,000 psi (0-2068 bar) gauge is K Monel. Bourdon tube material for 0-50,000 psi (0-3447 bar) and 0-80,000 psi (0-5116 bar) gauge is Inconel 718.

"C" DIAMETER

Gauge Size inches - (mm) 41/2 (114.3) 6 (152.4)

A cutout inches - (mm) 4.937 (125.39) 6.437 (163.49)

B inches - (mm) 5.375 (136.52) 7.0 (177.80)

C inches - (mm) .281 (7.14) .281 (7.14)

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

15

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. ! WARNING !
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is impor tant that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the nal selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice.

ISO-9001 Certi ed
02-0134SE-0103

Industrial Estate Whitemill-Wexford Republic of Ireland PH: 353-53-41566 FAX: 353-53-41582 e-mail: [email protected] www.snap-tite.com

8325 Hessinger Drive Erie, Pennsylvania 16509-4679 USA PH: 814-838-5700 FAX: 814-838-5811 e-mail: [email protected] www.autoclaveengineers.com