Ball Valves

Subsea Series
Internal Pressures to 20,000 psi (1379 bar)
Water Depths to 12,500 ft (3810 meters)
Parker Autoclave Engineers subsea ball valves have been designed
to fulfll the ever growing demand in the petroleum industry as
well as the need for externally pressurized components in other
markets. Utilizing the same design technology as the standard
ball valve, the subsea design incorporates the necessary design
alterations to provide a reliable externally pressurized valve for the
subsea industry.
With the availability of fttings, tubing, and related equipment our
ball valves can provide all your needs on high-pressure applica-
tions above or below the surface.
Ball Valve Features:
One-piece, trunnion mounted style, stem design
eliminates shear failure found in two-piece designs.
Re-torqueable seat glands for longer seat life.
PEEK seats which offer excellent resistance to chemicals,
heat, and wear/abrasion.
Full-port fow path minimizes pressure drop.
316 cold worked stainless steel construction.
Buna-N o-ring standard 250F (121C) max.
Low friction pressure assisted graphite flled PTFE stem
seal increases cycle life.
Wide selection of tube and pipe end fttings available.
Available to NACE MR-01-75.
Optional wetted materials.
Available in a number of fow confgurations and port
sizes.
B
a
l
l

V
a
l
v
e
s

-

S
u
b
s
e
a


S
e
r
i
e
s
Applications:
Subsea hydraulic manifolds
Subsea control panels
Subsea trees
Adaptable for Remote Operated Vehicle (ROV) operation by customer
www.autoclave.com
The Parker Autoclave Engineers ball valves can be utilized to
switch or isolate fow. The standard material of construction of
the valve is 316 cold worked stainless steel with PEEK seats,
graphite flled PTFE stem seal, and o-ring material as required
by the process fuid.
The subsea ball valve design incorporates additional o-ring
seals, which prevent the ingress of seawater into the valve
which would adversely affect the operation of the valve as well
as contaminate the process fuid. A signifcant feature of the
subsea design is a thrust washer positioned under the stem
preventing outside sea water from moving the stem from its
aligned position.
Subsea ball valves are designed to facilitate operation by a
Remote Operated vehicle (ROV). ROV operator assemblies are
used for valve mounting and to provide positive stopping for
precise 90 operation.
Various tube and pipe connections are available throughout a
variety of valve confgurations with standard port sizes from
3/16 to 1. Contact Parker Autoclave Engineers technical
sales support or your local distributor for more information
on optional materials of construction, seal materials and ROV
operator designs to ft your application requirements.
2
Ball Valves - 2-Way Subsea Series (1/4 Orifce)
Pressures to 20,000 psi (1379 bar) .250 (6.35mm) Orifce
Ordering Procedure
For complete information on available end connections, see next page. 2-way ball valves are furnished complete with tube or pipe connections.
Standard valve has Buna-N o-rings [250F (121C)] max.
Typical catalog number: S2B 4 S 20 M9
4-1/4
(6.35mm)
S - 316SS
(For material options
contact factory)
M9 - SF562CX20
(See Chart on
next page)
M9
End Connection
20
Pressure
(X 1000 psi)
S
Material
4
Ball
Orifce
Diameter
S2B
Valve
Series
Subsea-2-way V - Viton: 400F (204C) max
EPDM - Ethylene Propylene: 250F (121C) max
XXX
Options
MAWP: Maximum Allowable Working Pressure
C
v
listed is for maximum orifce size of .250 inches only.
Consult factory for C
v
of valves with reduced orifce sizes.
NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.
3
MAWP @ Minimum Orifce
Connection Room Temperature inches(mm)
W125 15,000 psi (1034 bar) .094 (2.39)
SW250 15,000 psi (1034 bar) .128 (3.25)
SW375 15,000 psi (1034 bar) .250 (6.35)
SW500 10,000 psi (690 bar) .250 (6.35)
SF250CX20 20,000 psi (1379 bar) .109 (2.77)
SF375CX20 20,000 psi (1379 bar) .203 (5.16)
SF562CX20 20,000 psi (1379 bar) .250 (6.35)
F250C 20,000 psi (1379 bar) .094 (2.39)
F375C 20,000 psi (1379 bar) .125 (3.17)
F562C 20,000 psi (1379 bar) .188 (4.77)
1/8 NPT 15,000 psi (1034 bar) .250 (6.35)
1/4 NPT 15,000 psi (1034 bar) .250 (6.35)
3/8 NPT 15,000 psi (1034 bar) .250 (6.35)
1/2 NPT 15,000 psi (1034 bar) .250 (6.35)
Valve C
v
=1.51
TEMPERATURE F
100 200 300 400 500
0
5,000
10,000
15,000
20,000
P
R
E
S
S
U
R
E

P
S
I
G
PRESSURE TEMPERATURE RATINGS
SF & F CONNECTIONS
W125, SW250, SW375, & NPT CONNECTIONS
SW500 CONNECTION
Pressure ratings are determined by the end connections chosen, see chart.
(1379)
(1034)
(690)
(345)
TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
P
R
E
S
S
U
R
E

B
A
R
NPT connections rated 400F (204C) maximum.
PACKING GLAND
LOCKING PIECE
SEAT GLAND
O-RING
SEAT RETAINER
BEARING
LOCKING PIECE
SPRING ENERGIZED SEAL
THRUST WASHER
ONE PIECE BALL STEM
PEEK SEATS
BOTTOM GLAND
O-RING
BOTTOM THRUST WASHER
O-RING
O-RING
Maximum temperature rating is determined by the o-ring material
(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).
4
Dimensions for reference only
and subject to change.
End Connection Options
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
S2B4S15L2 L2 W125 15,000 psi (1034 bar) 1 (25.40)
S2B4S15L4 L4 SW250 15,000 psi (1034 bar) 1 (25.40)
S2B4S15L6 L6 SW375 15,000 psi (1034 bar) 1 (25.40)
S2B4S10L8 L8 SW500 10,000 psi (690 bar) 1 (25.40)
S2B4S20M4 M4 SF250CX20 20,000 psi (1379 bar) 1 (25.40)
S2B4S20M6 M6 SF375CX20 20,000 psi (1379 bar) 1 (25.40)
S2B4S20M9 M9 SF562CX20 20,000 psi (1379 bar) 1 (25.40)
S2B4S20H4 H4 F250C 20,000 psi (1379 bar) 1 (25.40)
S2B4S20H6 H6 F375C 20,000 psi (1379 bar) 1 (25.40)
S2B4S20H9 H9 F562C 20,000 psi (1379 bar) 1.38 (35.05)
S2B4S15P2 P2 1/8 NPT 15,000 psi (1034 bar) 1 (25.40)
S2B4S15P4 P4 1/4 NPT 15,000 psi (1034 bar) 1 (25.40)
S2B4S15P6 P6 3/8 NPT 15,000 psi (1034 bar) 1 (25.40)
S2B4S15P8 P8 1/2 NPT 15,000 psi (1034 bar) 1.38 (35.05)
MAWP: Maximum Allowable Working Pressure
See ball valve option/details section for end connection details, material, and high temperature options.
Seat Gland
NOTE:
1. MAWP (See Table)
2. Maximum Sea Depth
12,500 FT (3811 meters)
3. Maximum External Pressure
5,500 psi (379 bar)
0.216 0.001 FLAT
(5.48 .025)
0.249 0.001
(6.32 .025)
0.50 FLAT LG
(12.7)
1.27
(32.4)
0.28
(7.1)
0.25
(6.4)
0.43
(10.9)
1.50
(38.1)
4.18
(106.3)
2.00
(50.8)
0.31
(7.7)
4.31
(109.3)
0.81 HEX
(20.6)
1.19
(30.2)
HEX
SEE SEAT
GLAND HEX
1.50
(38.1)
0.75
(19.1)
0.50
(12.7)
1/4-20 THD
1.00
(25.4)
SEE END
CONNECTION
OPTIONS
(both ends)
0.216 0.001 FLAT
(5.48 .025)
0.249 0.001
(6.32 .025)
0.50 FLAT LG
(12.7)
1.27
(32.4)
0.28
(7.1)
0.25
(6.4)
0.43
(10.9)
1.50
(38.1)
4.18
(106.3)
2.00
(50.8)
0.31
(7.7)
4.31
(109.3)
0.81 HEX
(20.6)
1.19
(30.2)
HEX
SEE SEAT
GLAND HEX
1.50
(38.1)
0.75
(19.1)
0.50
(12.7)
1/4-20 THD
1.00
(25.4)
SEE END
CONNECTION
OPTIONS
(both ends)
Dimensions for reference only
and subject to change.
Ball Valves - 2-Way Subsea Series (3/8 Orifce)
Pressures to 20,000 psi (1379 bar) .375 (9.52mm) Orifce
Ordering Procedure
For complete information on available end connections, see next page. 2-way ball valves are furnished complete with tube or pipe connections.
Standard valve has Buna-N o-rings [250F (121C)] max.
Typical catalog number: S2B 6 S 20 M9
6-3/8
(9.52 mm)
S - 316SS
(For material options
contact factory)
M9 - SF562CX20
(See Chart on
next page)
M9
End Connection
20
Pressure
(X 1000 psi)
S
Material
6
Ball
Orifce
Diameter
S2B
Valve
Series
Subsea-2-way
MAWP @ Minimum Orifce
Connection Room Temperature inches(mm)
SW500 10,000 psi (690 bar) .375 (9.52)
SF375CX20 20,000 psi (1379 bar) .203 (5.16)
SF562CX20 20,000 psi (1379 bar) .312 (7.92)
SF750CX20 20,000 psi (1379 bar) .375 (9.52)
1/4 NPT 15,000 psi (1034 bar) .375 (9.52)
3/8 NPT 15,000 psi (1034 bar) .375 (9.52)
1/2 NPT 15,000 psi (1034 bar) .375 (9.52)
Valve C
v
=3.51
XXX
Options
MAWP: Maximum Allowable Working Pressure
C
v
listed is for maximum orifce size of .375 inches only.
Consult factory for C
v
of valves with reduced orifce sizes.
NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.
TEMPERATURE F
100 200 300 400 500
0
5,000
10,000
15,000
20,000
P
R
E
S
S
U
R
E

P
S
I
G
PRESSURE TEMPERATURE RATINGS
SF CONNECTION
NPT CONNECTION
SW500 CONNECTION
Pressure ratings are determined by the end connections chosen, see chart.
(1379)
(1034)
(690)
(345)
TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
P
R
E
S
S
U
R
E

B
A
R
NPT connections rated 400F (204C) maximum.
5
V - Viton: 400F (204C) max
EPDM - Ethylene Propylene: 250F (121C) max

Maximum temperature rating is determined by the o-ring material
(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).
PACKING GLAND
LOCKING PIECE
SEAT GLAND
O-RING
SEAT RETAINER BEARING
LOCKING PIECE
SPRING ENERGIZED
SEAL
THRUST WASHER
PEEK SEATS
BOTTOM GLAND
O-RING BOTTOM THRUST WASHER
O-RING
O-RING
ONE PIECE BALL STEM
End Connection Options
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
S2B6S10L8 L8 SW500 10,000 psi (690 bar) 1.38 (35.05)
S2B6S20M6 M6 SF375CX20 20,000 psi (1379 bar) 1.38 (35.05)
S2B6S20M9 M9 SF562CX20 20,000 psi (1379 bar) 1.38 (35.05)
S2B6S20M12 M12 SF750CX20 20,000 psi (1379 bar) 1.38 (35.05)
S2B6S15P4 P4 1/4 NPT 15,000 psi (1034 bar) 1.38 (35.05)
S2B6S15P6 P6 3/8 NPT 15,000 psi (1034 bar) 1.38 (35.05)
S2B6S15P8 P8 1/2 NPT 15,000 psi (1034 bar) 1.38 (35.05)
MAWP: Maximum Allowable Working Pressure
See ball valve option/details section for end connection details, material, and high temperature options.
Seat Gland
6
NOTE:
1. MAWP (See Table)
2. Maximum Sea Depth
11,500 FT (3505 meters)
3. Maximum External Pressure
5,000 psi (345 bar)
Dimensions for reference only
and subject to change.
1.25
(31.8)
1.03
(26.2)
0.44
(26.2)
5.78
(146.8)
1.75 HEX
(44.5)
5.53
(140.3)
3.00
(76.2)
0.76
(19.2)
1.78
(45.2)
3.28
(83.3)
0.375 0.001 SQUARE
(9.35 0.02)
0.44
(11.1)
0.88
(22.3)
2.50
(63.5)
HEX
0.94
(23.9)
0.44
(11.1)
1.25
(31.8)
1.38
(35.1)
0.69
(17.5)
1.38
(34.9)
BODY
THICKNESS
5/16-18 THRD
.59 DEEP TYP
(4) PLACES
SEE SEAT
GLAND HEX
SEE END
CONNECTION
OPTIONS
(both ends)
1.25
(31.8)
1.03
(26.2)
0.44
(26.2)
5.78
(146.8)
1.75 HEX
(44.5)
5.53
(140.3)
3.00
(76.2)
0.76
(19.2)
1.78
(45.2)
3.28
(83.3)
0.375 0.001 SQUARE
(9.35 0.02)
0.44
(11.1)
0.88
(22.3)
2.50
(63.5)
HEX
0.94
(23.9)
0.44
(11.1)
1.25
(31.8)
1.38
(35.1)
0.69
(17.5)
1.38
(34.9)
BODY
THICKNESS
5/16-18 THRD
.59 DEEP TYP
(4) PLACES
SEE SEAT
GLAND HEX
SEE END
CONNECTION
OPTIONS
(both ends)
Ball Valves - 2-Way Subsea Series (1/2 Orifce)
Pressures to 15,000 psi (1034 bar) .500 (12.7mm) Orifce
Ordering Procedure
For complete information on available end connections, see next page. 2-way ball valves are furnished complete with tube or pipe connections.
Standard valve has Buna-N o-rings [250F (121C)] max.
Typical catalog number: S2B 8 S 15 M12
8-1/2
(12.7 mm)
S - 316SS
(For material options
contact factory)
M12 - SF750CX20
(See Chart on
next page)
M12
End Connection
15
Pressure
(X 1000 psi)
S
Material
8
Ball
Orifce
Diameter
S2B
Valve
Series
Subsea-2-way
XXX
Options
NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.
7
MAWP @ Minimum Orifce
Connection Room Temperature Inches (mm)
SF750CX20 15,000 psi (1034 bar) .500 (12.70)
SF1000CX20 15,000 psi (1034 bar) .500 (12.70)
3/4 NPT 10,000 psi (690 bar) .500 (12.70)
1 NPT 10,000 psi (690 bar) .500 (12.70)
Valve C
v
=10.20
MAWP: Maximum Allowable Working Pressure
V - Viton: 400F (204C) max
EPDM - Ethylene Propylene: 250F (121C) max

Maximum temperature rating is determined by the o-ring material
(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).
PACKING GLAND
LOCKING PIECE
SEAT GLAND
O-RING
SEAT RETAINER
LOCKING PIECE
SPRING
ENERGIZED
SEAL
THRUST WASHER
ONE PIECE BALL STEM
PEEK SEATS
BOTTOM GLAND
O-RING
BOTTOM THRUST WASHER
O-RING
O-RING
TEMPERATURE F
100 200 300 400 500
0
5,000
10,000
15,000
P
R
E
S
S
U
R
E

P
S
I
G
PRESSURE TEMPERATURE RATINGS
NPT CONNECTIONS
(1034)
(690)
(345)
TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
P
R
E
S
S
U
R
E

B
A
R
SF CONNECTIONS
NPT connections rated 400F (204C) maximum.
Pressure ratings are determined by the end connections chosen, see chart.
End Connection Options
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
S2B8S15M12 M12 SF750CX20 15,000 psi (1034 bar) 1.75 (44.5)
S2B8S15M16 M16 SF1000CX20 15,000 psi (1034 bar) 1.75 (44.5)
S2B8S10P12 P12 3/4 NPT 10,000 psi (690 bar) 1.75 (44.5)
S2B8S10P16 P16 1 NPT 10,000 psi (690 bar) 1.75 (44.5)
MAWP: Maximum Allowable Working Pressure
See ball valve option/details section for end connection details, material, and high temperature options.
Seat Gland
2.08
(52.8)
4.00
(101.6)
6.44
(163.5)
0.77
(19.6)
0.88
(22.2)
0.88
(22.4)
4.13
(104.8)
7.73
(196.4)
0.44
(11.1)
0.438 0.001 SQUARE
(11.13 0.021)
0.62
(15.9)
(4) 5/16-18 TAP
.500 DEEP
1.50
(38.1)
1.00
(25.4)
3.00
(76.2)
1.50
(38.1)
0.50
(12.7)
1.75
(44.5)
BODY
THICKNESS
2.25 HEX
(57.2)
SEE SEAT
GLAND HEX
SEE END
CONNECTION
OPTIONS
(both ends) 2.08
(52.8)
4.00
(101.6)
6.44
(163.5)
0.77
(19.6)
0.88
(22.2)
0.88
(22.4)
4.13
(104.8)
7.73
(196.4)
0.44
(11.1)
0.438 0.001 SQUARE
(11.13 0.021)
0.62
(15.9)
(4) 5/16-18 TAP
.500 DEEP
1.50
(38.1)
1.00
(25.4)
3.00
(76.2)
1.50
(38.1)
0.50
(12.7)
1.75
(44.5)
BODY
THICKNESS
2.25 HEX
(57.2)
SEE SEAT
GLAND HEX
SEE END
CONNECTION
OPTIONS
(both ends)
Dimensions for reference only
and subject to change.
NOTE:
1. MAWP (See Table)
2. Maximum Sea Depth
11,500 FT (3505 meters)
3. Maximum External Pressure
5,000 psi (345 bar)
8
Ball Valves - 2-Way Subsea Series (3/4 Orifce)
Pressures to 15,000 psi (1034 bar) .750 (19mm) Orifce
Ordering Procedure
For complete information on available end connections, see next page. 2-way ball valves are furnished complete with tube or pipe connections.
Standard valve has Buna-N o-rings [250F (121C)] max.
Typical catalog number: S2B 12 S 15 M12
12-3/4
(19.05 mm)
S - 316SS
(For material options
contact factory)
M12 - SF750CX10
(See Chart on
next page)
M12
End Connection
15
Pressure
(X 1000 psi)
S
Material
12
Ball
Orifce
Diameter
S2B
Valve
Series
Subsea-2-way
XXX
Options
NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.
MAWP @ Minimum Orifce
Connection Room Temperature Inches (mm)
SF750CX10 15,000 psi (1034 bar) .516 (13.10)
SF1000CX10 15,000 psi (1034 bar) .688 (17.47)
1/2 NPT 15,000 psi (1034 bar) .688 (17.47)
3/4 NPT 10,000 psi (690 bar) .75 (19.05)
1 NPT 10,000 psi (690 bar) .75 (19.05)
Valve C
v
=21
MAWP: Maximum Allowable Working Pressure
C
v
listed is for maximum orifce size of .750 inch only.
Consult factory for C
v
of valves with reduced orifce sizes.
V - Viton: 400F (204C) max
EPDM - Ethylene Propylene: 250F (121C) max

Maximum temperature rating is determined by the o-ring material
(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).
Pressure ratings are determined by the end connections chosen, see chart.
9
TEMPERATURE F
100 200 300 400 500
0
5,000
10,000
15,000
P
R
E
S
S
U
R
E

P
S
I
G
PRESSURE TEMPERATURE RATINGS
3/4 & 1 NPT
(1034)
(690)
(345)
TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
P
R
E
S
S
U
R
E

B
A
R
SF750CX, SF1000CX, 1/2 NPT
NPT connections rated 400F (204C) maximum.
PACKING GLAND
LOCKING PIECE
SEAT GLAND
O-RING
SEAT RETAINER
LOCKING PIECE
SPRING
ENERGIZED
SEAL
THRUST WASHER
ONE PIECE BALL STEM
PEEK SEATS
BOTTOM GLAND
O-RING
BOTTOM THRUST WASHER
O-RING
O-RING
End Connection Options
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
S2B12S15M12 M12 SF750CX20 15,000 psi (1034 bar) 1.88 (47.8)
S2B12S15M16 M16 SF1000CX20 15,000 psi (1034 bar) 1.88 (47.8)
S2B12S15P8 P8 1/2 NPT 15,000 psi (1034 bar) 1.88 (47.8)
S2B12S10P12 P12 3/4 NPT 10,000 psi (690 bar) 1.88 (47.8)
S2B12S10P16 P16 1 NPT 10,000 psi (690 bar) 1.88 (47.8)
MAWP: Maximum Allowable Working Pressure
See ball valve option/details section for end connection details, material, and high temperature options.
Seat Gland
2.67
(67.9)
5.31
(134.9)
8.58
(217.93)
.980
(24.89)
1.50
(38.10)
0.75
(19.05)
4.50
(114.30)
9.18
(233.10)
0.50
(12.70)
0.750 0.001 SQUARE
(19.05 0.021)
.938
(23.81)
(4) 3/8-16 TAP
.625 DEEP
1.75
(44.45)
1.50
(38.10)
3.50
(88.9)
2.25
(57.2)
0.75
(19.05)
3.00
(76.2)
BODY
THICKNESS
2.25 HEX
(57.2)
SEE SEAT
GLAND HEX
SEE END
CONNECTION
OPTIONS
(both ends)
Dimensions for reference only
and subject to change.
NOTE:
1. MAWP (See Table)
2. Maximum Sea Depth
11,500 FT (3505 meters)
3. Maximum External Pressure
5,000 psi (345 bar)
10
2.67
(67.9)
5.31
(134.9)
8.58
(217.93)
.980
(24.89)
1.50
(38.10)
0.75
(19.05)
4.50
(114.30)
9.18
(233.10)
0.50
(12.70)
0.750 0.001 SQUARE
(19.05 0.021)
.938
(23.81)
(4) 3/8-16 TAP
.625 DEEP
1.75
(44.45)
1.50
(38.10)
3.50
(88.9)
2.25
(57.2)
0.75
(19.05)
3.00
(76.2)
BODY
THICKNESS
2.25 HEX
(57.2)
SEE SEAT
GLAND HEX
SEE END
CONNECTION
OPTIONS
(both ends)
Ball Valves - 2-Way Subsea Series (1 Orifce)
Pressures to 10,000 psi (690 bar) 1.00 (25.4mm) Orifce
Ordering Procedure
For complete information on available end connections, see next page. 2-way ball valves are furnished complete with tube or pipe connections.
Standard valve has Buna-N o-rings [250F (121C)] max.
Typical catalog number: S2B 16 S 10 P16
16-1
(25.4 mm)
S - 316SS
(For material options
contact factory)
P16 - 1 NPT
(See Chart on
next page)
P16
End Connection
10
Pressure
(X 1000 psi)
S
Material
16
Ball
Orifce
Diameter
S2B
Valve
Series
Subsea-2-way
XXX
Options
NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.
MAWP @ Minimum Orifce
Connection Room Temperature Inches (mm) Valve C
V
SF1500CX 10,000 psi (690 bar) .938 (23.83) 30
3/4 NPT 10,000 psi (690 bar) 1.00 (25.40) 34
1 NPT 10,000 psi (690 bar) 1.00 (25.40) 34
MAWP: Maximum Allowable Working Pressure
V - Viton: 400F (204C) max
EPDM - Ethylene Propylene: 250F (121C) max

Maximum temperature rating is determined by the o-ring material
(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).
Pressure ratings are determined by the end connections chosen, see chart.
11
PACKING GLAND
LOCKING PIECE
SEAT GLAND
O-RING
SEAT RETAINER
LOCKING PIECE
SPRING
ENERGIZED
SEAL
THRUST WASHER
ONE PIECE BALL STEM
PEEK SEATS
BOTTOM GLAND
O-RING
BOTTOM THRUST WASHER
O-RING
O-RING
TEMPERATURE F
100 200 300 400 500
0
5,000
10,000
15,000
P
R
E
S
S
U
R
E

P
S
I
G
PRESSURE TEMPERATURE RATINGS
SF & NPT CONNECTIONS
(1034)
(690)
(345)
TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
P
R
E
S
S
U
R
E

B
A
R
NPT connections rated 400F (204C) maximum.
End Connection Options
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
S2B16S10M24 M24 SF1500CX 10,000 psi (690 bar) 1.88 (47.75)
S2B16S10P12 P12 3/4 NPT 10,000 psi (690 bar) 1.88 (47.75)
S2B16S10P16 P16 1 NPT 10,000 psi (690 bar) 1.88 (47.75)
MAWP: Maximum Allowable Working Pressure
See ball valve option/details section for end connection details, material, and high temperature options.
Seat Gland
Dimensions for reference only
and subject to change.
NOTE:
1. MAWP (See Table)
2. Maximum Sea Depth
11,500 FT (3505 meters)
3. Maximum External Pressure
5,000 psi (345 bar)
12
2.67
(67.9)
5.80
(147.2)
9.96
(253.0)
1.25
(31.8)
1.75
(44.5)
0.98
(24.9)
5.19
(131.8)
8.41
(213.7)
0.50
(12.70)
1.000 .005 SQUARE
(25.40 0.12)
1.25
(31.7)
(4) 3/8-16 TAP
.625 DEEP
2.00
(50.8)
1.50
(38.10)
4.00
(101.6)
2.88
(73.0)
0.75
(19.05)
3.38
(85.7)
BODY
THICKNESS
2.88 DIA
(73.0)
SEE SEAT
GLAND HEX
SEE END
CONNECTION
OPTIONS
(both ends)
2.67
(67.9)
5.80
(147.2)
9.96
(253.0)
1.25
(31.8)
1.75
(44.5)
0.98
(24.9)
5.19
(131.8)
8.41
(213.7)
0.50
(12.70)
1.000 .005 SQUARE
(25.40 0.12)
1.25
(31.7)
(4) 3/8-16 TAP
.625 DEEP
2.00
(50.8)
1.50
(38.10)
4.00
(101.6)
2.88
(73.0)
0.75
(19.05)
3.38
(85.7)
BODY
THICKNESS
2.88 DIA
(73.0)
SEE SEAT
GLAND HEX
SEE END
CONNECTION
OPTIONS
(both ends)
Dimensions for P12 and P16 connections only. Contact facotry for M16 dimensions.
Ball Valves - 3-Way Subsea Series (3/16 Orifce)
Pressures to 20,000 psi (1379 bar) .187 (4.77mm) Orifce
Ordering Procedure
For complete information on available end connections, see next page. 3-way ball valves are furnished complete with tube or pipe connections.
Standard valve has Buna-N o-rings [250F (121C)] max.
Typical catalog number: S3BD 3 S 20 M9
3-3/16
(4.77 mm)
S -316SS
(For material options
contact factory)
M9 - SF562CX20
(See Chart on
next page)
M9
End Connection
20
Pressure
(X 1000 psi)
S
Material
3
Ball
Orifce
Diameter
MAWP @ Minimum Orifce
Connection Room Temperature inches(mm)
SF250CX20 20,000 psi (1379 bar) .109 (2.77)
SF375CX20 20,000 psi (1379 bar) .188 (4.77)
SF562CX20 20,000 psi (1379 bar) .188 (4.77)
F250C 20,000 psi (1379 bar) .094 (2.39)
F375C 20,000 psi (1379 bar) .125 (3.17)
1/4 NPT 15,000 psi (1034 bar) .188 (4.77)
3/8 NPT 15,000 psi (1034 bar) .188 (4.77)
XXX
Options
MAWP: Maximum Allowable Working Pressure
C
v
listed is for maximum orifce size of .188 inches only.
Consult factory for C
v
of valves with reduced orifce sizes.
NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.
Valve C
v
=.50
Note: Side inlet pressure not recommended. Bottom inlet pressure only.
Maximum temperature rating is determined by the o-ring material
(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).
V - Viton: 400F (204C) max
EPDM - Ethylene Propylene: 250F (121C) max

S3BD
Valve
Series
S3B Subsea-3-way
S3BD Subsea-3-way
diverter
ONE PIECE BALL STEM
O-RING
O-RING
PACKING GLAND
LOCKING PIECE
SEAT GLAND
O-RING
SEAT
BOTTOM BEARING
LOCKNUT
STEM SEAL
THRUST WASHER
BELLEVILLE WASHERS
SEAT RETAINER
BOTTOM GLAND
O-RING
BELLEVILLE BACKUP
13
TEMPERATURE F
100 200 300 400 500
0
5,000
10,000
15,000
20,000
P
R
E
S
S
U
R
E

P
S
I
G
PRESSURE TEMPERATURE RATINGS
*pressure ratings are determined by the end connections chosen, see chart.
P
R
E
S
S
U
R
E

B
A
R
(345)
(690)
(1034)
(1379)
(-18) (38) (93) (150) (204) (260)
TEMPERATURE C
NOTE: Maximum side connection inlet pressure 15,000 psi (1034 bar).
SF & F CONNECTIONS
NPT CONNECTION
NPT connection rated 400F (204C) maximum.
14
End Connection Options
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
S3B3S15M4 M4 SF250CX20 15,000 psi (1034 bar) 1 (25.40)
S3BD3S20M4 20,000 psi (1379 bar)
S3B3S15M6 M6 SF375CX20 15,000 psi (1034 bar) 1 (25.40)
S3BD3S20M6 20,000 psi (1379 bar)
S3B3S15M9 M9 SF562CX20 15,000 psi (1034 bar) 1 (25.40)
S3BD3S20M9 20,000 psi (1379 bar)
S3B3S15H4 H4 F250C 15,000 psi (1034 bar) 1 (25.40)
S3BD3S20H4 20,000 psi (1379 bar)
S3B3S15H6 H6 F375C 15,000 psi (1034 bar) 1 (25.40)
S3BD3S20H6 20,000 psi (1379 bar)
S3B3S15P4 P4 1/4 NPT 15,000 psi (1034 bar) 1 (25.40)
S3BD3S15P4
S3B3S15P6 P6 3/8 NPT 15,000 psi (1034 bar) 1 (25.40)
S3BD3S15P6
See ball valve option/detail section for end connection details, material, and high temperature options.
*The Diverter Valve design permits inlet fow through the bottom port. Outlet fow may be diverted to either valve side port.
OPEN OPEN
*3-Way Diverter Valve
90 Turn
OPEN CLOSED
3-Way Ball Valve
180 Turn
OPEN
*3-Way Diverter Valve
90 Turn
3-Way Ball Valve
180 Turn
Seat Gland
0.216 .001
(5.49 .025)
1/4-20 TAP
.41 DEEP
(2) PLACES
.041 TYP
(10.41)
0.28 TYP
(7.11)
0.94
(23.87)
0.50 FLAT LGTH
(12.7)
2.00
(50.8)
1.50
(38.1)
2.56
(65.02)
1.28
(32.5)
4.34
(110.23)
2.50
(63.50)
4.72
(119.89)
1.19 HEX TYP
(30.22)
1.00 HEX TYP
(25.4)
1.00
(25.4)
2.50
(63.50)
1.25
(31.75)
0.25 STEM REF
(6.35)
1.00
THK
BODY
(25.4)
0.50
(12.7)
SEE END
CONNECTION
OPTONS
(3 PLACES)
.249 .001
(6.32 .025)
0.216 .001
(5.49 .025)
1/4-20 TAP
.41 DEEP
(2) PLACES
.041 TYP
(10.41)
0.28 TYP
(7.11)
0.94
(23.87)
0.50 FLAT LGTH
(12.7)
2.00
(50.8)
1.50
(38.1)
2.56
(65.02)
1.28
(32.5)
4.34
(110.23)
2.50
(63.50)
4.72
(119.89)
1.19 HEX TYP
(30.22)
1.00 HEX TYP
(25.4)
1.00
(25.4)
2.50
(63.50)
1.25
(31.75)
0.25 STEM REF
(6.35)
1.00
THK
BODY
(25.4)
0.50
(12.7)
SEE END
CONNECTION
OPTONS
(3 PLACES)
.249 .001
(6.32 .025)
NOTE:
1. MAWP (See Table)
2. Maximum Sea Depth
10,300 FT (3140 meters)
3. Maximum External Pressure
4,500 psi (310 bar)
Dimensions for reference only
and subject to change.
Ball Valves - 3-Way Subsea Series (3/8 Orifce)
Pressures to 10,000 psi (689 bar) .328 (8.33mm) Orifce
Ordering Procedure
For complete information on available end connections, see next page. 3-way ball valves are furnished complete with tube or pipe connections.
Standard valve has Buna-N o-rings [250F (121C)] max.
Typical catalog number: S3B 6 S 10 M9
6-3/8
(9.52 mm)
S -316SS
(For material options
contact factory)
M9 - SF562CX20
(See Chart on
next page)
M9
End Connection
10
Pressure
(X 1000 psi)
S
Material
6
Ball
Orifce
Diameter
S3B
Valve
Series
S3B Subsea-3-way
S3BD Subsea-3-way
diverter
XXX
Options
MAWP: Maximum Allowable Working Pressure
C
v
listed is for maximum orifce size of .328 inches only.
Consult factory for C
v
of valves with reduced orifce sizes.
NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.
MAWP @ Minimum Orifce
Connection Room Temperature inches(mm)
SW500 10,000 psi (690 bar) .328 (8.33)
SF375CX20 10,000 psi (690 bar) .203 (5.16)
SF562CX20 10,000 psi (690 bar) .312 (7.92)
SF750CX20 10,000 psi (690 bar) .328 (8.33)
1/4 NPT 10,000 psi (690 bar) .328 (8.33)
3/8 NPT 10,000 psi (690 bar) .328 (8.33)
1/2 NPT 10,000 psi (690 bar) .328 (8.33)
Valve C
v
=2.1
ONE PIECE BALL STEM
O-RING
O-RING
PACKING GLAND
LOCKING PIECE
SEAT GLAND
O-RING
SEAT
BOTTOM BEARING
LOCKNUT
STEM SEAL
THRUST WASHER
BELLEVILLE WASHERS
SEAT RETAINER
BOTTOM GLAND
O-RING
BELLEVILLE BACKUP
V - Viton: 400F (204C) max
EPDM - Ethylene Propylene: 250F (121C) max

Note: Side inlet pressure not recommended. Bottom inlet pressure only.
Maximum temperature rating is determined by the o-ring material
(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).
15
TEMPERATURE F
100 200 300 400 500
0
5,000
10,000
15,000
P
R
E
S
S
U
R
E

P
S
I
G
PRESSURE TEMPERATURE RATINGS
SF, SW500 & NPT CONNECTIONS
(345)
(690)
(1034)
(260)
TEMPERATURE C
P
R
E
S
S
U
R
E

B
A
R
(-18) (38) (93) (150) (204)
NPT connections rated 400F (204C) maximum.
16
End Connection Options

See ball valve option/details section for end connection details, material, and high temperature options.
*The Diverter Valve design permits inlet fow through the bottom port. Outlet fow may be diverted to either valve side port.
OPEN CLOSED
3-Way Ball Valve
180 Turn
OPEN
OPEN OPEN
*3-Way Diverter Valve
90 Turn
MAWP: Maximum Allowable Working Pressure
*3-Way Diverter Valve
90 Turn
3-Way Ball Valve
180 Turn
Dimensions for reference only
and subject to change.
NOTE:
1. MAWP (See Table)
2. Maximum Sea Depth
11,500 FT (3505 meters)
3. Maximum External Pressure
5,000 psi (345 bar)
S3B6S10L8 L8 SW500 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10L8
S3B6S10M6 M6 SF375CX20 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10M6
S3B6S10M9 M9 SF562CX20 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10M9
S3B6S10M12 M12 SF750CX20 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10M12
S3B6S10P4 P4 1/4 NPT 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10P4
S3B6S10P6 P6 3/8 NPT 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10P6
S3B6S10P8 P8 1/2 NPT 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10P8
3.03
(77.0)
1.63
(41.4)
2.06
(52.3)
0.41 TYP
(10.4)
0.81
FLAT LENGTH
(20.6)
2.00
(50.8)
1.00
(25.4)
0.281 0.001
2 FLATS 180 APART
(7.14 .025)
0.437 0.001
(11.1 .025)
0.28 HOLE
(2) PLACES
(7.1)
3.00
(76.2)
5.74
(145.8)
5.08
(129.0)
1.38
(35.1)
0.69
(17.5)
1.00
(25.4)
1.75 HEX
(44.5)
1/4-20 THREAD
(2) PLACES
0.281 FLATS REF.
(7.1)
B
.66
(16.8) .44
(11.2)
SEE SEAT
GLAND HEX
1.38
(35.1)
SEE END
CONNECTION
OPTIONS
(3 PLACES)
1.28
(32.5)
3.03
(77.0)
1.63
(41.4)
2.06
(52.3)
0.41 TYP
(10.4)
0.81
FLAT LENGTH
(20.6)
2.00
(50.8)
1.00
(25.4)
0.281 0.001
2 FLATS 180 APART
(7.14 .025)
0.437 0.001
(11.1 .025)
0.28 HOLE
(2) PLACES
(7.1)
3.00
(76.2)
5.74
(145.8)
5.08
(129.0)
1.38
(35.1)
0.69
(17.5)
1.00
(25.4)
1.75 HEX
(44.5)
1/4-20 THREAD
(2) PLACES
0.281 FLATS REF.
(7.1)
B
.66
(16.8) .44
(11.2)
SEE SEAT
GLAND HEX
1.38
(35.1)
SEE END
CONNECTION
OPTIONS
(3 PLACES)
1.28
(32.5)
3.03
(77.0)
1.63
(41.4)
2.06
(52.3)
0.41 TYP
(10.4)
0.81
FLAT LENGTH
(20.6)
2.00
(50.8)
1.00
(25.4)
0.281 0.001
2 FLATS 180 APART
(7.14 .025)
0.437 0.001
(11.1 .025)
0.28 HOLE
(2) PLACES
(7.1)
3.00
(76.2)
5.74
(145.8)
5.08
(129.0)
1.38
(35.1)
0.69
(17.5)
1.00
(25.4)
1.75 HEX
(44.5)
1/4-20 THREAD
(2) PLACES
0.281 FLATS REF.
(7.1)
B
.66
(16.8) .44
(11.2)
SEE SEAT
GLAND HEX
1.38
(35.1)
SEE END
CONNECTION
OPTIONS
(3 PLACES)
1.28
(32.5)
DETAIL B
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

Ball Valves - 3-Way Subsea Series (1/2 Orifce)
Pressures to 10,000 psi (690 bar) .500 (12.7mm) Orifce
MAWP @ Minimum Orifce
Connection Room Temperature inches(mm)
SF750CX20 10,000 psi (690 bar) .500 (12.70)
SF1000CX20 10,000 psi (690 bar) .500 (12.70)
3/4 NPT 10,000 psi (690 bar) .500 (12.70)
1 NPT 10,000 psi (690 bar) .500 (12.70)
Valve C
v
=4.4
Ordering Procedure
For complete information on available end connections, see next page. 3-way ball valves are furnished complete with tube or pipe connections.
Standard valve has Buna-N o-rings [250F (121C)] max.
Typical catalog number: S3B 8 S 10 M12
8-1/2
(12.7 mm)
S -316SS
(For material options
contact factory)
M12 - SF750CX20
(See Chart on
next page)
M12
End Connection
10
Pressure
(X 1000 psi)
S
Material
8
Ball
Orifce
Diameter
XXX
Options
MAWP: Maximum Allowable Working Pressure
NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.
Note: Side inlet pressure not recommended. Bottom inlet pressure only.
S3B
Valve
Series
S3B Subsea-3-way
S3BD Subsea-3-way
diverter
V - Viton: 400F (204C) max
EPDM - Ethylene Propylene: 250F (121C) max

Maximum temperature rating is determined by the o-ring material
(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).
1/2 3 WAY SUBSEA BALL
VALVE STEM
O-RING
O-RING
PACKING GLAND
LOCKING PIECE
SEAT GLAND
O-RING
SEAT
BOTTOM BEARING
LOCKNUT
STEM SEAL
THRUST WASHER
BELLEVILLE WASHERS
SEAT RETAINER
BOTTOM GLAND
O-RING
BELLEVILLE BACKUP
17
TEMPERATURE F
100 200 300 400 500
0
5,000
10,000
15,000
P
R
E
S
S
U
R
E

P
S
I
G
PRESSURE TEMPERATURE RATINGS
NPT & SF CONNECTIONS
(345)
(690)
(1034)
(260)
TEMPERATURE C
P
R
E
S
S
U
R
E

B
A
R
(-18) (38) (93) (150) (204)
NPT connections rated 400F (204C) maximum.
18
End Connection Options
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
S3B8S10M12 M12 SF750CX20 10,000 psi (690 bar) 1.75 (44.5)
S3BD8S10M12
S3B8S10M16 M16 SF1000CX20 10,000 psi (690 bar) 1.75 (44.5)
S3BD8S10M16
S3B8S10P12 P12 3/4 NPT 10,000 psi (690 bar) 1.75 (44.5)
S3BD8S10P12
S3B8S10P16 P16 1 NPT 10,000 psi (690 bar) 1.75 (44.5)
S3BD8S10P16



See ball valve options for end connection details, material, and high temperature options.
*The Diverter Valve design permits inlet fow through the bottom port. Outlet fow may be diverted to either valve side port.
OPEN OPEN
*3-Way Diverter Valve
90 Turn
OPEN CLOSED
3-Way Ball Valve
180 Turn
OPEN
MAWP: Maximum Allowable Working Pressure
*3-Way Diverter Valve
90 Turn
3-Way Ball Valve
180 Turn
Seat Gland
DETAIL B
2.32
(58.9)
1.188
(30.2)
FLAT LENGTH
0.50 TYP
(12.7)
2.00
(50.8)
3.62
(91.9)
4.13
(104.9)
SEE SEAT
GLAND HEX
1.50
(38.1)
3.00
(76.2)
0.686
(17.4)
0.28
(7.1)
(2) PLACES
0.438 0.001
(11.1 .025)
SQUARE
B
7.77
(197.4)
0.438 (11.1) REF
1.75
(44.5)
0.88
(22.4)
3.00
(76.2)
1.50
(38.1)
1/4-20 THREAD
(2) PLACES
2.25 HEX
(57.2)
SEE END
CONNECTION
OPTIONS
(3 PLACES)
1.79
(45.5)
1.75
(44.5)
.65
(16.5) .44
(11.2)
2.32
(58.9)
1.188
(30.2)
FLAT LENGTH
0.50 TYP
(12.7)
2.00
(50.8)
3.62
(91.9)
4.13
(104.9)
SEE SEAT
GLAND HEX
1.50
(38.1)
3.00
(76.2)
0.686
(17.4)
0.28
(7.1)
(2) PLACES
0.438 0.001
(11.1 .025)
SQUARE
B
7.77
(197.4)
0.438 (11.1) REF
1.75
(44.5)
0.88
(22.4)
3.00
(76.2)
1.50
(38.1)
1/4-20 THREAD
(2) PLACES
2.25 HEX
(57.2)
SEE END
CONNECTION
OPTIONS
(3 PLACES)
1.79
(45.5)
1.75
(44.5)
.65
(16.5) .44
(11.2)
Dimensions for reference only
and subject to change.
NOTE:
1. MAWP (See Table)
2. Maximum Sea Depth
11,500 FT (3505 meters)
3. Maximum External Pressure
5,000 psi (345 bar)
This page is blank
19
02-0108SE January2013 2013 Parker Hannifn Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifn Corporation
Parker Hannifn Manufacturing Ltd.
Instrumentation Products Division, Europe
Industrial Estate Whitemill
Wexford, Republic of Ireland
PH: 353 53 914 1566
FAX: 353 53 914 1582
Instrumentation Products Division
Autoclave Engineers Operation
8325 Hessinger Drive
Erie, Pennsylvania 16509-4679 USA
PH: 814-860-5700 FAX: 814-860-5811
www.autoclave.com
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifn Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the fnal selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifcations, designs, availability and pricing, are subject to change by Parker Hannifn Corporation and its subsidiaries at
any time without notice.
Offer of Sale
The items described in this document are available for sale by Parker Hannifn Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be
governed by the provisions stated in Parker's standard terms and conditions of sale (copy available upon request).
ISO-9001 Certified
Caution! Do not mix or interchange parts or tubing with those of
other manufacturers. Doing so is unsafe and will void warranty.
Caution! Parker Autoclave Engineers Valves, Fittings and Tools are
not designed to work with common commercial instrument tubing
and will only work with tubing built to Parker Autoclave Engineers
AES Specifcations. Failure to do so will void warranty.