K Series 1/2" To 4" Stainless Steel Control Valves: Description

K Series
1/2" to 4" Stainless Steel Control Valves

K_A63 1/2 to 1-3/4
Description
A range of two port stainless steel single seat globe valves
contorming to ANSI/ASTM standards in sizes 1/2 to 4 (DN15 to
DN100) available with screwed or flanged connections. When used in
conjunction with a pneumatic or electric linear actuator,they provide
characterized modulating or on/oft flow control. For close control with
pneumatic actuators, a valve positioner should be used.
Sizes and pipe connections

KEA61 1/2, 3,4, 1, 1-1/4, 1-1/2 and 2 screwed NPT.
KEA63 1/2, 3/4, 1, 1-1/2, 2, 2-1/2, 3 and 4 flanged ANSI
150 and ANSI 300
Options
Equal %, linear, reduced Cv. fast opening (on/off)
soft seal, hard faced, low noise, and anti-cavltation.
PTFE chevrons or graphite packing.
Control
Valves
Trim
Stem seal
Refer to TI-P305-04 US for further details.
Plug design
Leakage
Flow
characteristic
Rangeability
Travel
1/2 to 1-1/4 (DN15 to DN32)

Caged parabolic
1-1/2 to 4 (DN40 to DN100)
Vee port
Metal-to-metal seat
ANSI/FCI 70/2 Class IV
PTFE soft seal
ANSI/FCI 70/2 Class VI
KEA valves
Equal percentage (modulating)
KLA valves
Linear (modulating)
KFA valves
Fast opening (on/off)
50 to 1
1/2 to 2 (DN15 to DN50)
3/4 (20 mm)
2-1/2 to 4 (DN15 to DN50)
1-3/16 (30 mm)
Limiting conditions
Body design conditions
ANSI 150 and ANSI 300
Maximum design
PTFE chevron seals
482F (250C)
temperature
Graphite packed seals
800F (426C)
Minimum design temperature
-148F (-100C)
Maximum cold hydraulic
ANSI 150
425 psig (29.3 bar g)
test pressure
ANSI 300
1100 psig (75.8 bar g)
Maximum differential pressures
see actuator TIS
Operating range
Pressure barg
20
10
30
40
49.6
800
426
600
300
ANSI 150
400
200
Steam
Saturation
Curve
200
100
ANSI 300
0
0
100
200
300 400
Pressure psig
500
600
720
Temperature C
0
Temperature F
Globe Control
Valves
Technical data
K_A
1-1/2 to 4 plug and seat
Materials
1
2
3
4
5
7
8
9
10
11
12
13
14
15
Body
Bonnet
Valve plug
Valve seat
Valve stem
Gland nut gasket
Lock-nut
Gland nut
Mounting nut
Gland seals
Gland spring
Bonnet gasket
Bonnet studs
Bonnet nuts
16
17
18
Seat gasket
Guide bush
Bonnet guide
Stainless steel
ASTM A351 CF8M
Stainless steel
ASTM A351 CF8M
Stainless steel
ASTM A276 316L
Stainless steel
ASTM A276 316L
Stainless steel
ASTM A276 316L
Semi-rigid graphite laminated
Stainless steel
Stainless steel
ASTM A276 31 6L
Mild steel zinc plated
PTFE chevrons
Stainless steel
Stainless steel
ASTM A193 B8 M2
Stainless steel
ASTM A194 8M
1/2 to 3/4 (DN15 and DN20) 3/8 UNC
1 to 2 (DN25 to DN50)
1/2 UNC
2-1/2to4 (DN65 to DN100)
5/8UNC
Glass reinforced PTFE
Stainless steel
Stellite
Note: Part No.18 Bonnet guide used on all valves above 1-1/2 and valves having soft seat and hard faced trims in smaller sizes.
Local regulation may restrict the use of this product below the conditions quoted. Limiting conditions refer to standard connections only.
In the interests of development and improvement of the product, we reserve the right to change the specification.
TI-1-427-US 09.03
K Series
1/2" to 4" Stainless Steel Control Valves
C v Values
Size
Equal % and
linear trim
On/Off trim
1/2" (DN15) 3/4" (DN20)

4.7
7.4
1" (DN25)
11.7
1-1/4" (DN32) 1-1/2" (DN40)

18.7
29.3
2"(DN50)
42
2-1/2"(DN65)
74
3"(DN80)
117
4" (DN100)
187
4.7
11.7
21.0
59
99
137
211
7.4
32.8
Three reductions in Cv are available for equal percentage and linear trims, for further details see TIS 1.427 .
For conversion Cv(UK) = Cv(US) x 0.833 Kvs = Cv(US) x 0.855
Weights
Dimensions
(approximate) in pounds (kg)
(approximate) in inches (mm)
B (ANSI 150)
7.3 (184)
7.3 (184)
7.3 (184)
8.8 (222)
10.0 (254)
10.9 (276)
11.8 (298)
13.9 (353)
B (ANSI 300)
7.5 (191)
7.6 (194)
7.8 (197)
9.3 (235)
10.5 (267)
11.5 (292)
12.5 (318)
14.5 (368)
C
3.3 (84)
3.4 (87)
3.8 (96)
4.0 (101)
4.0 (101)
4.2 (106)
5.4 (136)
5.6 (141)
6.5 (165)
D
1.69 (43)
1.7 (44)
2.0 (51)
2.3 (58)
2.5 (64)
3.0 (76)
-
K_A61
8.4
8.8
12.1
17.6
19.9
23.2
-
K_A63
(3.8)
(4.0)
(5.5)
(8.0)
(9.0)
(10.5)
10.6
13.2
18.1
30.9
36.4
59.5
72.8
103.6
(4.8)
(6.0)
(8.2)
(14.0)
(16.5)
(27.0)
(33.0)
(47.0)
Control
Valves
Valve size
A
1,2
(DN15)
6.5 (165)
3/4
(DN20)
6.5 (165)
1
(DN25)
7.8 (197)
1-1/4
(DN32)
8.5 (216)
1-1/2
(DN40)
9.3 (235)
2
(DN50)
10.5 (267)
2-1/2
(DN65)
3
(DN80)
4
(DN1OO)
-
Sizing
Globe Control
Valves
For steam see TIS 1.618.
Installation
The valve should be installed in a horizontal pipeline with the direction of flow arrow as indicated by the arrow on the valve body. If
necessary the actuator should be commissioned in accordance
with the Installation and Maintenance Instructions supplied with the
valve.
How to order
Example: 1 off - 2 KEA63 Cv (US) 42 control valve flanged ANSI
300.
Spare parts
See TIS 1.430.
Compatible actuators and positioners

EL3500, EL5060 and EL5600 series.
PN5000, 6000, 3000, 4000, 1000 Series.
PP5 (pneumatic), EPS (electropneumatic) and
SP2 (smart electropneumatic).
Spirax Sarco, Inc. 2003
Electric
Pneumatic
Positioners
Refer to relevant TIS sheet for further details
TI-1-427-US
Spirax Sarco, Inc., 1150 Northpoint Blvd., Blythewood, SC 29016
09.03
Telephone: (803) 714-2000 FAX (803) 714-2222

K Series 1/2" To 4" Stainless Steel Control Valves: Description

Uploaded by

Copyright:

Available Formats

K Series 1/2" To 4" Stainless Steel Control Valves: Description

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

K Series 1/2" To 4" Stainless Steel Control Valves: Description

Uploaded by

Copyright:

Available Formats

K Series

1/2" to 4" Stainless Steel Control Valves

Sizes and pipe connections

Refer to TI-P305-04 US for further details.

1/2 to 1-1/4 (DN15 to DN32)

1/2" (DN15) 3/4" (DN20)

1-1/4" (DN32) 1-1/2" (DN40)

(approximate) in pounds (kg)

(approximate) in inches (mm)

For steam see TIS 1.618.

Compatible actuators and positioners

Refer to relevant TIS sheet for further details

Telephone: (803) 714-2000 FAX (803) 714-2222

You might also like