DISTRIBUTED VALVES

C CV

Model B2 Cast Steel Flanged

Floating Ball Valves

NAVCO

DISTRIBUTED VALVES

TABLE OF CONTENTS

MODEL B2 CAST STEEL FLANGED

FLOATING BALL VALVES
Sizes, Specifications & Compliance

Features

ORDER INFORMATION

Valve Details

Materials List

Valve Dimensions

NAVCO

CT-NUT-B2
10/05 NP-3M

6&7

ACTUATOR MOUNTING DIMENSIONS

PRESSURE, TEMPERATURE RATINGS AND

TORQUE TABLES

TRADEMARK INFORMATION

10

TERMS AND CONDITIONS

11

DISTRIBUTED VALVES

MODEL B2 CAST STEEL FLANGED FLOATING BALL VALVES

SIZES AND PRESSURE RATINGS

Full Port sizes 1 1/2 in. through 8 in. (40 mm through 200 mm)

Reduced Port sizes 2 in. through 10 in. (50 mm through 250 mm)

ASME Class 150 through 600 (PN 20 through 100)

MATERIALS AND ACTUATION

Materials:

Carbon Steel, Stainless Steel

Operator:

Manual Lever Handle. Optional Gear Operator

for 6 in. (150 mm) and larger sizes

Actuation: Consult Cooper Cameron Valves - NUTRON Sales Department for

information on various types of actuators

COMPLIANCE TO STANDARDS AND SPECIFICATIONS:

ISO 9001-2000: Registered Quality System

CE Mark Number 0879

ASME B16.34

API 598, 607 4th Edition (Fire Safe)

NACE MR0175 (Rev. 2002)

CSA Z245.15 Steel Valves

ASME Section VIII Division 1 Boiler and Pressure Vessel Code

Canadian Registration Number (CRN)

NAVCO

CT-NUT-B2
10/05 NP-3M

DISTRIBUTED VALVES

MODEL B2 CAST STEEL FLANGED FLOATING BALL VALVES

STANDARD FEATURES

MODEL B2

ISO ACTUATOR MOUNTING PAD

Provides for easy installation of actuators
and accessories, gear operators and
locking device. Bolting Pad as per ISO 5211
and MSS-SP 101.

STAINLESS STEEL TRIM IS INCORPORATED AS STANDARD.

FIRE SAFE QUALIFIED TO API 607 4th EDITION.
STEM

Valve incorporates blow out proof stem. Anti static.

Adjustable graphite packing.

THRUST WASHER

Lowers turning torque.

C CV

ANTI STATIC SPRING

BALL

The floating ball design

allows for positive shut-off
in either flow direction.
Includes pressure
equalization hole to
prevent trapping of
pressure in the body cavity.

SEAT
SEALS

Viton or HSN O-ring as primary

body seal.

NAVCO

CT-NUT-B2
10/05 NP-3M

Large cross section of the seating surface provides long

life and low turning torque. The seat design allows for
shut off at both low and high pressures.
Materials available are PTFE and Nylon.

DISTRIBUTED VALVES

MODEL B2 CAST STEEL FLANGED FLOATING BALL VALVES

SIZES AVAILABLE
ASME CLASS

150

300

600

(PN)

(20)

(50)

(100)

in.

1 1/2 thru 8

1 1/2 thru 8

1 1/2 thru 4 in.

(mm)

(40 thru 200)

(40 thru 200)

(40 thru 100)

2 thru 10

2 thru 10

2 thru 6

(50 thru 250)

(50 thru 250)

(50 thru 150)

B2- Full Port

(DN)
B2 - Reduced Port
(DN)

ORDERING INFORMATION
How to develop
figure numbers:

SIZE
BORE
MODEL
B2 - 2 PIECE
BOLTED

R - REDUCED
PORT
F - FULL
PORT

15 -1 1/2 in.
20 2 in.
30 3 in.
40 4 in.
60 6 in.
80 8 in.
100 - 10 in.

/
/
/
/
/
/
/

40 mm
50 mm
80 mm
100 mm
150 mm
200 mm
250 mm

STYLE *
A - STAINLESS STEEL -50F (-46C)
L - SOUR/LOW TEMP -50F (-46C)
S - SOUR -20F (-29C)

B2 - F 20 R 03 S

Z
FIRE
SAFE

END CONNECTION

PRESSURE

OPTION

R - RAISED FACE

01 - 150 ASME (PN 20)

03 - 300 ASME (PN 50)
06 - 600 ASME (PN 100)

GEAR OPERATOR
(no other options
are available)

Examples:
B2-F20R03SZ

Model B2, Full Port, 2 in. /50 mm, Raised Face, ASME 300 (PN 50),
Sour Style Valve. Fire Safe Qualified to API 607 4th Edition.

B2-R60R06LZ

Model B2, Reduced Port, 6 in. /150 mm, Raised Face, ASME 600 (PN 100),
Sour/Low Temp Style Valve. Fire Safe Qualified to API 607 4th Edition.

* Consult Cameron, Valves & Measurement - NUTRON Sales Department for detailed valve style descriptions and actuation packages or for a
particular special valve service application.

NAVCO

CT-NUT-B2
10/05 NP-3M

DISTRIBUTED VALVES

MODEL B2 CAST STEEL FLANGED FLOATING BALL VALVES

VALVE DETAILS
22
21
28
20
11

10

19

13

27

23

14

14

25

26

11

24

19

12

10

14

14

13

8
3

17

12

C CV

HANDLE ASSEMBLY SUPPLIED ON

4 in. / 100 mm FULL PORT AND
6 in. / 150 mm REDUCED PORT & LARGER

16
15
1
5
4
5
6

GEAR OPERATOR OPTIONAL

NAVCO

CT-NUT-B2
10/05 NP-3M

DISTRIBUTED VALVES

MODEL B2 CAST STEEL FLANGED FLOATING BALL VALVES

MATERIALS LIST
ITEM

PART

ASME CLASS*

SOUR

SOUR & LOW TEMP

Body

150, 300 & 600

ASTM A216 Gr. WCC

ASTM A352 Gr. LCC

2
+
3
+
4

Adapter

150, 300 & 600

ASTM A216 Gr. WCC

ASTM A352 Gr. LCC

Stem

150, 300 & 600

ASTM A564 17-4 PH H1150

ASTM A564 17-4 PH H1150

Ball

150, 300 & 600

ASTM A351 Gr. CF8

ASTM A351 Gr. CF8

+
! 5

Seat

150 & 300

600

PTFE**
Nylon

PTFE**
Nylon

+
! 6
+
! 7
+
! 8

Body O-Ring

150, 300 & 600

Viton

HSN

Stem O-Ring

150, 300 & 600

Viton

HSN

Thrust Bearing

150, 300 & 600

Teflon

Teflon

+
! 9

Packing Ring

150, 300 & 600

Graphite

Graphite

10

Stop Plate

150, 300 & 600

Carbon Steel

Carbon Steel

11

Retaining Ring

150, 300 & 600

Carbon Steel

Carbon Steel

12

Packing Follower

150, 300 & 600

Stainless Steel

Stainless Steel

13

Packing Gland

150, 300 & 600

Stainless Steel

Stainless Steel

14

Socket Head Cap Screw

150, 300 & 600

Stainless Steel

Stainless Steel

15

Nut

150, 300 & 600

ASTM A194 Gr. 2HM

ASTM A194 Gr. L7M

16
+
17

Stud

150, 300 & 600

ASTM A193 B7M

ASTM A320 L7M

Spring (Anti-Static)

150, 300 & 600

Inconel X-750

Inconel X-750

19

Wave Spring Washer

150, 300 & 600

Carbon Steel

Carbon Steel

20

Handle

150, 300 & 600

Ductile Iron

Ductile Iron

21

Washer

150, 300 & 600

Carbon Steel

Carbon Steel

22

Screw

150, 300 & 600

Carbon Steel

Carbon Steel

23

Socket Head Cap Screw

150, 300 & 600

Carbon Steel

Carbon Steel

24

Key

150, 300 & 600

Carbon Steel

Carbon Steel

25

Cast Handle Hub

150, 300 & 600

Carbon Steel

Carbon Steel

26

Screw

150, 300 & 600

Carbon Steel

Carbon Steel

27

Handle

150, 300 & 600

Carbon Steel

Carbon Steel

28

Screw

150, 300 & 600

Carbon Steel

Carbon Steel

ITEM

PART

ASME CLASS*

STAINLESS STEEL

Body

150, 300 & 600

ASTM A351 Gr. CF8M

2
+
3
+
4

Adapter

150, 300 & 600

ASTM A351 Gr. CF8M

Stem

150, 300 & 600

ASTM A564 17-4 PH H1150 C/W Nitriding

Ball

150, 300 & 600

ASTM A351 Gr. CF8

+
! 5

Seat

150 & 300

600

PTFE**
Nylon

+
! 6
+
! 7
+
! 8

Body O-Ring

150, 300 & 600

HSN

Stem O-Ring

150, 300 & 600

HSN

Thrust Bearing

150, 300 & 600

Teflon

+
! 9

Packing Ring

150, 300 & 600

Graphite

10

Stop Plate

150, 300 & 600

Stainless Steel

11

Retaining Ring

150, 300 & 600

Stainless Steel

12

Packing Follower

150, 300 & 600

Stainless Steel

13

Packing Gland

150, 300 & 600

Stainless Steel

14

Socket Head Cap Screw

150, 300 & 600

Stainless Steel

15

Nut

150, 300 & 600

ASTM A453 Gr. 660

16
+
17

Stud

150, 300 & 600

ASTM A453 Gr. 660

Spring (Anti-Static)

150, 300 & 600

Inconel X-750

19

Wave Spring Washer

150, 300 & 600

Stainless Steel

20

Handle

150, 300 & 600

Stainless Steel

21

Washer

150, 300 & 600

Stainless Steel

22

Screw

150, 300 & 600

Stainless Steel

23

Socket Head Cap Screw

150, 300 & 600

Stainless Steel

24

Key

150, 300 & 600

Stainless Steel

25

Cast Handle Hub

150, 300 & 600

Stainless Steel

26

Screw

150, 300 & 600

Stainless Steel

27

Handle

150, 300 & 600

Stainless Steel

28

Screw

150, 300 & 600

Stainless Steel

+
Major repair kit.
! Minor repair kit.

* PN 20, 50 & 100 is equivalent to ASME CLASS 150, 300 & 600.

**

6 in. (150 DN), 8 in. (200 DN) Full Port and 8 in. (200 DN),
10 in. (250 DN) Reduced Port ASME 300 use Nylon Seats.
Cameron, Valves & Measurement reserves the right to substitute materials listed above with
alterative material approved for designated service.

NAVCO

CT-NUT-B2
10/05 NP-3M

DISTRIBUTED VALVES

MODEL B2 CAST STEEL FLANGED FLOATING BALL VALVES

FULL PORT

DIMENSIONS inches (mm)

NPS ASME
in. (DN) CLASS (PN)

A
RF

CV

(K V)

1 1/2 (40) 150

(20)

6.50 (165)

1.50 (38)

2.50 (64)

5.50 (140)

12.00 (305)

5.00 (127)

260

(0.225)

21

(9.5)

300

(50)

7.50 (191)

1.50 (38)

3.06 (78)

5.50 (140)

12.00 (305)

5.00 (127)

209

(0.181)

28

(12.7)

600

(100)

9.50 (241)

1.50 (38)

3.06 (78)

5.50 (140)

12.00 (305)

5.00 (127)

225

(0.195)

37

(16.8)

150

(20)

7.00 (178)

2.00 (51)

3.00 (76)

5.88 (149)

12.00 (305)

5.25 (133)

442

(0.382)

29

(13.2)

2 (50)

3 (80)

4 (100)

6 (150)

8 (200)

300

(50)

8.50 (216)

2.00 (51)

3.25 (83)

5.88 (149)

12.00 (305)

5.25 (133)

454

(0.393)

41

(18.6)

600

(100)

11.50 (292)

2.00 (51)

3.25 (83)

5.88 (149)

12.00 (305)

5.25 (133)

302

(0.261)

50

(22.7)

150

(20)

8.00 (203)

3.00 (76)

3.75 (95)

8.00 (203)

20.00 (508)

6.68 (170)

1363

(1.179)

63

(28.6)

300

(50)

11.12 (283)

3.00 (76)

4.12 (105)

8.00 (203)

20.00 (508)

6.68 (170)

1197

(1.035)

83

(37.7)

600

(100)

14.00 (356)

3.00 (76)

4.12 (105)

8.00 (203)

20.00 (508)

6.68 (170)

1072

(0.927)

97

(44.0)

150

(20)

9.00 (229)

4.00 (102)

4.50 (114)

11.88 (302)

22.50 (572)

N/A

2452

(2.12)

96

(43.5)

300

(50)

12.00 (305)

4.00 (102)

5.00 (127)

11.88 (302)

22.50 (572)

N/A

2323

(2.01)

135

(61.2)

600

(100)

17.00 (432)

4.00 (102)

5.38 (137)

11.88 (302)

34.50 (876)

N/A

1729

(1.50)

180

(81.6)

150

(20)

15.50 (394)

6.00 (152)

5.50 (140)

15.25 (387)

46.50 (1181)

N/A

4700

(4.07)

204

(92.5)

300

(50)

15.88 (403)

6.00 (152)

6.25 (159)

15.25 (387)

70.50 (1790)

N/A

5483

(4.74)

250

(113.4)

150

(20)

18.00 (457)

8.00 (203)

6.75 (171)

N/A

N/A

13.47 (342)

10206

(8.83)

355

(161.0)

300

(50)

19.75 (502)

8.00 (203)

7.50 (191)

N/A

N/A

13.47 (342)

8333

(7.21)

435

(197.3)

NOTE: A dimension to be within 0.060 in. /2 mm.

WEIGHT
lb.
(kg)

NAVCO

CT-NUT-B2
10/05 NP-3M

DISTRIBUTED VALVES

MODEL B2 CAST STEEL FLANGED FLOATING BALL VALVES

REDUCED PORT

DIMENSIONS inches (mm)

NPS ASME
in. (DN) CLASS (PN)
2 (50)

3 (80)

4 (100)

6 (150)

A
RF

CV

(K V)

WEIGHT
lb. (kg)

150

(20)

7.00 (178)

1.50 (38)

2.00 (51)

3.00 (76)

5.50 (140)

12.00 (305)

5.00 (127)

185

(0.160)

25

(11.3)

300

(50)

8.50 (216)

1.50 (38)

2.00 (51)

3.25 (83)

5.50 (140)

12.00 (305)

5.00 (127)

182

(0.157)

32

(14.5)

600

(100)

11.50 (292)

1.50 (38)

2.00 (51)

3.25 (83)

5.50 (140)

12.00 (305)

5.00 (127)

171

(0.148)

43

(19.5)

150

(20)

8.00 (203)

2.00 (51)

3.00 (76)

3.75 (95)

5.88 (149)

12.00 (305)

5.25 (133)

221

(0.191)

40

(18.1)

300

(50)

11.12 (283)

2.00 (51)

3.00 (76)

4.12 (105)

5.88 (149)

12.00 (305)

5.25 (133)

381

(0.330)

60

(27.2)

600

(100)

14.00 (356)

2.00 (51)

3.00 (76)

4.12 (105)

5.88 (149)

12.00 (305)

5.25 (133)

289

(0.250)

69

(31.3)

150

(20)

9.00 (229)

3.00 (76)

4.00 (102)

4.50 (114)

8.00 (203)

20.00 (508)

6.68 (170)

509

(0.440)

73

(33.1)

300

(50)

12.00 (305)

3.00 (76)

4.00 (102)

5.00 (127)

8.00 (203)

20.00 (508)

6.68 (170)

606

(0.524)

104

(47.2)

600

(100)

17.00 (432)

3.00 (76)

4.00 (102)

5.38 (137)

8.00 (203)

20.00 (508)

6.68 (170)

464

(0.401)

139

(63.0)

150

(20)

10.50 (267)

4.00 (102)

6.00 (152)

5.50 (140)

11.88 (302)

22.50 (572)

N/A

1020

(0.882)

116

(52.6)

300

(50)

15.88 (403)

4.00 (102)

6.00 (152)

6.25 (159)

11.88 (302)

22.50 (572)

N/A

1029

(0.890)

190

(86.2)

600

(100)

22.00 (559)

4.00 (102)

6.00 (152)

7.00 (178)

11.88 (302)

34.50 (876)

N/A

1068

(0.924)

288 (130.6)

8.00 (203)

6.75 (171)

15.25 (387)

46.50 (1181)

N/A

2216

(1.92)

224 (101.6)

8 (200)

150
300

(20) 11.50 (292)+ 6.00 (152)

(50) 16.50 (419)+ 6.00 (152)

8.00 (203)

7.50 (191)

15.25 (387)

70.50 (1790)

N/A

2343

(2.03)

315 (142.9)

10 (250)

150

(20) 21.00 (533)* 8.00 (203) 10.00 (254)

8.00 (203)

N/A

N/A

13.47 (342)

3890

(3.37)

422 (191.4)

300

(50) 22.38 (568)* 8.00 (203)

10.00 (254) 8.75 (222)

N/A

N/A

13.47 (342)

4172

(3.61)

540 (244.9)

NOTE: A dimension to be within 0.060 in. /2 mm.

* ASME B16.10 Long Pattern. + ASME B16.10 Short Pattern.

NAVCO

CT-NUT-B2
10/05 NP-3M

DISTRIBUTED VALVES

MODEL B2 CAST STEEL FLANGED FLOATING BALL VALVES

ACTUATOR MOUNTING DIMENSIONS
A
B

NOTE:
SHOWN IN OPEN POSITION,
CLOCKWISE 90 TO CLOSE

L THRU
4 HOLES ON M B.C.D.,
LOCATED AS SHOWN,
EQUALLY SPACED & STRADDLING CL

G
D
E

DIMENSIONS

inches
(mm)

Bore Size
in. ASME
(DN) CLASS
1 1/2
(40)

2
(50)

3
(80)

(PN)

150

(20)

300

(50)

600

(100)

150

(20)

300

(50)

600

(100)

150

(20)

300

(50)

600

(100)

3.188
(81.0)
3.188
(81.0)
3.188
(81.0)
3.500
(88.9)
3.500
(88.9)
3.500
(88.9)
4.625
(117.5)
4.625
(117.5)
4.625
(117.5)

0.440
(11.2)
0.440
(11.2)
0.440
(11.2)
0.380
(9.7)
0.380
(9.7)
0.380
(9.7)
0.500
(12.7)
0.500
(12.7)
0.500
(12.7)

3.500
(88.9)
3.500
(88.9)
3.500
(88.9)
3.500
(88.9)
3.500
(88.9)
3.500
(88.9)
4.938
(125.4)
4.938
(125.4)
4.938
(125.4)

1.428
(36.3)
1.428
(36.3)
1.428
(36.3)
1.444
(36.7)
1.444
(36.7)
1.444
(36.7)
1.693
(43.0)
1.693
(43.0)
1.693
(43.0)

0.494
(12.5)
0.494
(12.5)
0.494
(12.5)
0.494
(12.5)
0.494
(12.5)
0.494
(12.5)
0.744
(18.9)
0.744
(18.9)
0.744
(18.9)

0.906
(23.0)
0.906
(23.0)
0.906
(23.0)
0.906
(23.0)
0.906
(23.0)
0.906
(23.0)
1.125
(28.6)
1.125
(28.6)
1.125
(28.6)

0.683
(17.3)
0.683
(17.3)
0.683
(17.3)
0.683
(17.3)
0.683
(17.3)
0.683
(17.3)
1.000
(25.4)
1.000
(25.4)
1.000
(25.4)

0.840
(21.3)
0.840
(21.3)
0.840
(21.3)
0.840
(21.3)
0.840
(21.3)
0.840
(21.3)
1.125
(28.6)
1.125
(28.6)
1.125
(28.6)

0.750
(19.0)
0.750
(19.0)
0.750
(19.0)
0.750
(19.0)
0.750
(19.0)
0.750
(19.0)
1.125
(28.6)
1.125
(28.6)
1.125
(28.6)

3.510
(89.2)
3.510
(89.2)
3.510
(89.2)
3.510
(89.2)
3.510
(89.2)
3.510
(89.2)
4.380
(111.3)
4.380
(111.3)
4.380
(111.3)

0.406
(10.3)
0.406
(10.3)
0.406
(10.3)
0.406
(10.3)
0.406
(10.3)
0.406
(10.3)
0.406
(10.3)
0.406
(10.3)
0.406
(10.3)

2.750
(69.9)
2.750
(69.9)
2.750
(69.9)
2.750
(69.9)
2.750
(69.9)
2.750
(69.9)
4.000
(101.6)
4.000
(101.6)
4.000
(101.6)

L THRU
4 HOLES ON M B.C.D.,
LOCATED AS SHOWN,
EQUALLY SPACED & STRADDLING CL

G
B
D

NOTE:
SHOWN IN OPEN POSITION,
CLOCKWISE 90 TO CLOSE

DIMENSIONS

Bore Size
in. ASME
(DN) CLASS (PN)
4
(100)

6
(150)

8
(200)

150

(20)

300

(50)

600

(100)

150

(20)

300

(50)

150

(20)

300

(50)

NAVCO

CT-NUT-B2
10/05 NP-3M

H R

inches
(mm)

H R

5.875
(149.2)
5.875
(149.2)
5.875
(149.2)
8.500
(215.9)
8.500
(215.9)
10.125
(257.2)
10.125
(257.2)

0.560
(14.2)
0.560
(14.2)
0.560
(14.2)
0.570
(14.5)
0.570
(14.5)
0.630
(16.0)
0.630
(16.0)

4.938
(125.4)
4.938
(125.4)
4.938
(125.4)
5.938
(150.8)
6.938
(176.2)
6.875
(174.6)
8.938
(227.0)

2.255
(57.3)
2.255
(57.3)
2.255
(57.3)
2.850
(72.4)
2.850
(72.4)
3.344
(84.9)
3.344
(84.9)

0.313
(8.0)
0.313
(8.0)
0.313
(8.0)
0.376
(9.6)
0.376
(9.6)
0.502
(12.8)
0.502
(12.8)

1.607
(40.8)
1.607
(40.8)
1.607
(40.8)
1.906
(48.4)
1.906
(48.4)
2.156
(54.8)
2.156
(54.8)

1.375
(34.9)
1.375
(34.9)
1.375
(34.9)
1.478
(37.5)
1.478
(37.5)
1.927
(48.9)
1.927
(48.9)

1.125
(28.6)
1.125
(28.6)
1.125
(28.6)
1.530
(38.9)
1.530
(38.9)
1.780
(45.2)
1.780
(45.2)

1.125
(28.6)
1.125
(28.6)
1.125
(28.6)
1.440
(36.6)
1.440
(36.6)
1.565
(39.8)
1.565
(39.8)

4.380
(11.3)
4.380
(11.3)
4.380
(11.3)
5.310
(134.9)
5.310
(134.9)
5.940
(150.9)
5.940
(150.9)

0.406
(10.3)
0.406
(10.3)
0.406
(10.3)
0.531
(13.5)
0.656
(16.7)
0.656
(16.7)
0.781
(19.8)

4.000
(101.6)
4.000
(101.6)
4.000
(101.6)
4.950
(125.7)
5.500
(139.7)
5.500
(139.7)
6.500
(165.1)

DISTRIBUTED VALVES

MODEL B2 CAST STEEL FLANGED FLOATING BALL VALVES

PRESSURE/TEMPERATURE RATINGS (SEATS AND SEALS)*

TEMPERATURE C
0

38

93

149

204

260

316

371

1500

10000

1200

8000

6000
HSN
O-RING

4000

600
VITON
O-RING

2000

300

PRESSURE (kPa)

PRESSURE (psi)

NYLON

900

PTFE

0
0

100

200

300

400

500

600

700

TEMPERATURE F
* Consult ASME B16.34 for Body and Adapter Material Pressure/Temperature Ratings.

BREAKAWAY TORQUE DATA

Torque=inch-pounds

Bore
Size
in.
(DN)

ASME CLASS
(PN)
Pressure (psi)
Seat Material

150
(20)
285

300
(50)
740

600
(100)
1480

240

360

480

1 1/2

(40)

PTFE
Nylon

420

480

540

660

(50)

PTFE

360

600

720

Nylon

480

720

960

1200

(80)

PTFE

600

1080

1680

Nylon

720

1200

1800

2160

840

1560

2160

(100)

PTFE
Nylon

960

1680

2280

2880

(150)

PTFE

3600

7200

Nylon

4800

9600

13200

PTFE

4800

9000

Nylon

8400

15600

24000

(200)

Torque values shown are to be used as a guide for actuator selection. All above torque values are based upon clean liquid service. Additional factors
such as media characteristics, number of cycles and temperature may require an additional safety factor.
Please contact the actuator supplier/manufacturer for these factors.

NAVCO

CT-NUT-B2
10/05 NP-3M

DISTRIBUTED VALVES

TRADEMARK INFORMATION
NAVCO is a registered trademark which is owned by Cameron.
This document contains references to registered trademarks or product designations,
which are not owned by Cameron.

10

Trademark

Owner

Inconel
Teflon
Viton

INCO Nickel Sales, Inc.

E.I. DuPont De Nemours & Company
E.I. DuPont De Nemours & Company

NAVCO

CT-NUT-B2
02/07 NP-3M

CAMERON, VALVES & MEASUREMENT TERMS AND CONDITIONS OF SALE

1. CONTRACT ACCEPTANCE:
Any written or oral purchase order received from Buyer by Seller shall be construed as a written
acceptance of Sellers offer to sell and shall be filled in accordance with the terms and conditions of
sale set forth herein. SELLERS ACCEPTANCE OF THIS ORDER IS EXPRESSLY CONDITIONED ON BUYERS
ASSENT TO THE TERMS CONTAINED HEREIN. The terms and conditions of Sellers proposal (if any) and
acknowledgement shall prevail over any conflicting or different terms in Buyers order unless Buyer
notifies Seller in writing of its objections thereto within fifteen (15) days from receipt of Sellers
acknowledgement. Buyers standard terms of purchase will not be considered a counteroffer to Sellers
terms and conditions of sale. The failure of Seller to object to any provision in conflict herewith whether
contained on Buyers purchase order or otherwise shall not be construed as a waiver of the provisions
hereof nor as an acceptance thereof.
2. QUOTATIONS AND PRICES:
Any product, service capability or manufacturing capability which may be available at the time a
quotation is made is subject to prior sale. Prices quoted are subject to change without notice. The price
in effect at the time of shipment including any escalation formula will apply, unless a valid quotation or
written agreement to the contrary exists between Buyer and Seller. All prices shown are in U.S. dollars
and are F.O.B. Sellers shipping point. Seller reserves the right to place a service charge on past due
accounts at the highest rate permitted by law. Any documentation pertaining to traceability
requirements for raw materials or products or documentation required for any routine or special
processes must be identified by the Buyer at the time of quotation (if any) or at the time of order
placement.
3. TAXES:
Any tax or other charge imposed by law on the sale or production of goods or the performance of
services shall be paid by the Buyer, unless the law specifically provides that such payment must be made
by Seller, in which case Buyer shall reimburse Seller for such payment as part of the purchase price.
Custom duties, consular fees, insurance charges and other comparable charges will be borne by Buyer.
4. SHIPPING SCHEDULE AND DELIVERY:
Shipment schedules are given as accurately as conditions permit and every effort will be made to make
shipments as scheduled. Seller will not be responsible for deviations in meeting shipping schedules nor
for any losses or damages to Buyer (or any third party) occasioned by deviations in the shipping schedule,
whether due to Acts of God, orders bearing priority ratings established pursuant to law, differences with
workmen, local labor shortages, fire, flood, shortages or failure of raw materials, supplies, fuel, power or
transportation, breakdown of equipment or any other causes beyond Sellers reasonable control,
whether of similar or dissimilar nature than those enumerated. Seller shall have additional time within
which to perform as may be reasonably necessary under the circumstances and shall have the right to
apportion its production among its customers in such a manner as it may consider to be equitable.
Seller reserves the right to furnish commercially equivalent or better substitutes for materials or to
subcontract the Buyers order or portions thereof as Seller deems necessary. In no event shall Seller be
liable for any consequential damages resulting from failure or delay in shipment. If Buyer requires
drawings, procedures, standards or similar material for approval, shipping schedules will be calculated
from the time such approvals are received by Seller, since shipping schedules are based on Seller having
all required information and a firm order from Buyer which is enterable into production. Any hold points,
witness points or the need for inspection by Buyers representatives must be identified by Buyer at the
time of quotation (if any) and/or order placement in order that the effect on the prices or shipping
schedules (if any) can be taken into account. Additional inspection or testing required by Buyer which
affects normal production sequence will be considered as extending the shipping dates accordingly.
5. TERMS OF PAYMENT:
Terms of payment are 30 days from date of invoice unless otherwise stated in the quotation or Sellers
order acknowledgment.
6. CANCELLATIONS AND RETURNS:
Purchase orders once placed by Buyer and accepted by Seller can be canceled only with Sellers written
consent and upon terms which will save Seller from loss. No products may be returned for credit or
adjustment without written permission from Sellers office authorized to issue such permission.
7. WARRANTIES:
All products of Sellers manufacture except for its Orbit product are warranted against defects of
material and workmanship for a period of twelve (12) months from the date of installation or eighteen
(18) months from date of shipment, whichever period first expires while its Orbit product is warranted
for thirty six (36) months from date of shipment, when all such products are used in the service and
within the pressure range for which they were manufactured. In the case of products or parts not wholly
of Sellers manufacture, Sellers liability shall be limited to the extent of its recovery from the
manufacturer of such products or parts under its liability to Seller. Any repair work performed by Seller
is warranted for one year from completion of such repairs and applies only to work performed. If, within
these specified periods, Seller receives notice from Buyer of any alleged defect in or nonconformance of
any product or repair and if in the Sellers sole judgment the product or repair does not conform or is
found to be defective in material or workmanship, then, Buyer shall, at Sellers request, return the part
or product F.O.B. to Sellers designated plant or service location. Seller has no liability for removal or
reinstallation of products or equipment. Seller, at its option and expense, shall repair or replace the
defective part or product, or repay to Buyer the full price paid by Buyer for such defective part, repair or
product. Any repayment of purchase price shall be without interest. Sellers warranty liability, including
defects caused by Sellers negligence, shall be limited to such repair, replacement or refund, and shall
not include claims for labor costs, expenses of Buyer resulting from such defects, recovery under general
tort law or strict liability or for damages resulting from delays, loss of use, or other direct, indirect,
incidental or consequential damages of any kind. Seller will not be responsible for failures of products
which have been in any way tampered with or altered by anyone other than an authorized representative
of Seller, failures due to lack of compliance with recommended maintenance procedures or products
which have been repaired or altered in such a way (in Sellers judgment) as to affect the products
adversely. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, STATUTORY
OR IMPLIED, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR PARTICULAR
PURPOSE WHICH EXCEED THE FOREGOING WARRANTY.
8.ENGINEERING AND SERVICE:
Upon request, Seller will provide engineering and/or technical information regarding its products and
their uses and, if feasible, will provide personnel to assist Buyer in effecting field installations and/or field
service. Any such information, service or assistance so provided, whether with or without charge, shall
be advisory only
9. LABOR STANDARDS:
Seller hereby certifies that these products were produced in accordance with all applicable requirements
of Section 6, 7 and 12 of the Fair Labor Standards Act as amended and of regulations and orders of the
United States Department of Labor issued under Section 14 thereof.
10. INSPECTION:
Unless otherwise agreed in writing, final inspection and acceptance of products must be made at Sellers
plant or other shipping or receiving point designated by Seller and shall be conclusive except as regards
latent defects. Buyers representatives may inspect at the Sellers plant or shipping point during working
hours prior to shipment in such manner as will not interfere with operations.
11. DELIVERY AND ACCEPTANCE:
Delivery shall be in accordance with the requirements in the Purchase Contract, provided, in the event
Buyer is unable to accept delivery upon completion of the manufacture of the Goods in accordance with
such requirements, Buyer agrees that (i) title and risk of ownership shall pass to Buyer on date of Sellers
invoice, and (ii) Buyer will make payments within thirty days after date of such invoice. Seller shall retain
custodial risk of loss until delivery is made in accordance with such requirements.
12. EXPORT COMPLIANCE:
The Buyer shall provide the Seller with relevant end-use, end-user and country of end-use information
with respect to the goods, services, software or technology to be supplied hereunder (collectively,
Items). Based on and in reliance on such information, the Seller will supply such Items in compliance
with applicable trade and customs laws including that of the United States of America. The Seller cautions
and the Buyer acknowledges that any change in end-use, end-user or country of end-use (including a
shipment between countries other than the U.S.) may be restricted or prohibited by applicable trade and

customs law, whether it be of the U.S. or other country. The Parties shall comply with all trade and
customs laws (including U.S. Export Controls) except for any such laws which conflict with or are
otherwise penalized under the laws of the U.S., which in the event of such conflict, Seller shall notify
Buyer. The Buyer agrees in particular that it shall not use and shall not permit any third party to use such
items in connection with the design, production, use, or storage of chemical, biological or nuclear
weapons or missiles of any kind.
13. TRANSPORTATION CHARGES, ALLOWANCES, CLAIMS:
All prices are F.O.B. Sellers plant or other designated shipping point. No freight is allowed unless
stated in Sellers quotation (if any) or in a written contract which may exist between Seller and Buyer
at the time of shipment. If Sellers quotation or a written contract states that all or a portion of freight
is allowed, all prices are F.O.B. Sellers plant or other designated shipping point, with most economical
surface transportation allowed. If the quoted or contractual price includes transportation, Seller reserves
the right to designate the common carrier and to ship in the manner it deems most economical. Added
costs due to special routing requested by the Buyer are chargeable to the Buyer. Under no circumstances
is any freight allowance which is absorbed by Seller to be deducted from the selling price. If the quoted
price or contract includes transportation, no deduction will be made in lieu thereof whether Buyer accepts
shipment at plant, warehouse, freight station, or otherwise supplies its own transportation. When sales
are made from the Sellers warehouse, Seller reserves the right to charge either actual or pro-rated freight
from Sellers principle point of manufacture to Sellers warehouse. Buyer assumes risk of loss upon delivery
to the carrier, regardless of who pays shipping costs. Seller endeavors to pack or prepare all shipments so
that they will not break, rust or deteriorate in transit, but does not guarantee against such damage.
Unless requested in writing by the Buyer, no shipments are insured by Seller against damage or loss in
transit. Seller will place insurance as nearly as possible in accordance with Buyers written instructions but
in such case Seller acts only as agent between the insurance company and the Buyer and assumes no
liability whatsoever. Any claims for shipping loss, breakage or damage (obvious or concealed) are Buyers
responsibility and should be made to the carrier. All claims regarding shortages must be made within
thirty (30) days from receipt of shipment and must be accompanied by the packing list(s) covering the
shipment.
14. INDEMNIFICATION AND LIMITATION OF LIABILITY:
A. INDEMNIFICATION:
Buyer Group means: Buyer, its parent (if any), subsidiaries, affiliates, co-owners, co-venturers,
partners and any entity with whom Buyer has an economic interest with respect to the Work including
Buyers customer and its and their respective employees, personnel, directors, officers, borrowed
servants, representatives, agents, contractors and subcontractors (respectively and of any tier or level
and who are not included within the Seller Group), Seller Group means: Seller, its parent (if any),
subsidiaries, affiliates, co-owners and its and their respective employees, personnel, directors, officers,
borrowed servants, representatives, agents, contractors and subcontractors (respectively and of any tier
or level and who are not included within the Buyer Group), Negligence means: sole, joint or
concurrent, active, passive, gross or willful misconduct.
(1) Seller shall release, defend, save, indemnify (collectively Indemnify) and hold Buyer Group
harmless from and against all claims, demands, losses, damages and causes of action of whatever kind
or nature (collectively Claims), for loss of or damage to the property of the members of the Seller
Group even if such Claims arise from or attributable to the Negligence of the members of Buyer Group.
(2) Seller shall Indemnify and hold Buyer Group harmless from and against all Claims for the death(s)
of or personal injury(ies) to members of the Seller Group even if such Claims arise from or attributable
to the Negligence of the members of Buyer Group.
(3) Buyer shall Indemnify and hold Seller Group harmless from and against all Claims for loss of or
damage to the property (including the Work) of the members of the Buyer Group even if such Claims
arise from or attributable to the Negligence of the members of Seller Group.
(4) Buyer shall Indemnify and hold Seller Group harmless from and against all Claims for the death(s)
of or personal injury(ies) to members of the Buyer Group even if such Claims arise from or
attributable to the Negligence of the members of Seller Group.
(5) Buyer (on its own behalf and on behalf of Buyer Group) and Seller (on its own behalf and on
behalf of Seller Group) shall Indemnify and hold each other harmless from and against any and all
Claims asserted against them by or on behalf of any third party for the death(s) of or personal injury (ies)
to such a third party, as well as loss (es) of or damage(s) to the property of such a third party. A third
party is a person or entity not included in Buyer Group or Seller Group. It is agreed by Buyer and Seller
that their respective duty of indemnity to each other with respect to Claims asserted against them by a
third party pursuant to this Article 14 (A) (5) shall be limited to their respective degree of Negligence.
(6) Notwithstanding any other provision contained in this Agreement, Buyer shall Indemnify and hold
the members of Seller Group harmless from and against all Claims (including clean-up costs and loss (es)
of oil, gas or hydrocarbons) arising from pollution, contamination, dumping or spilling of any substance
and even if arising out of or attributable to the Negligence of the members of the Seller Group.
B. INDEMNITY FOR CONSEQUENTIAL DAMAGES:
UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, EXEMPLARY OR PUNITIVE DAMAGES (collectively CONSEQUENTIAL), AS
DEFINED BY THE LAWS GOVERNING THIS PURCHASE ORDER, NOR FOR ANY LOSS OF
ANTICIPATED PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF USE OF EQUIPMENT OR
OF ANY INSTALLATION, SYSTEM OR FACILITY INTO WHICH SELLERS EQUIPMENT MAY BE
LOCATED OR AT WHICH MEMBERS OF THE SELLER GROUP MAY BE PERFORMING WORK
AND BUYER AGREES TO INDEMNIFY AND HOLD SELLER GROUP HARMLESS FROM AND
AGAINST ANY CLAIMS FOR SUCH CONSEQUENTIAL DAMAGES EVEN IF ARISING OUT
OF OR ATTRIBUTABLE TO THE NEGLIGENCE OF THE MEMBERS OF THE SELLER GROUP.
C. LIMITATION OF LIABILITY:
EXCEPT AS OTHERWISE EXPRESSLY LIMITED IN THIS AGREEMENT IT IS THE EXPRESS
INTENTION OF THE PARTIES HERETO THAT ALL INDEMNITY OBLIGATIONS AND/OR LIABILITIES
HEREBY ASSUMED BY THE PARTIES SHALL BE: (i) SUPPORTED BY INSURANCE; (ii) WITHOUT
LIMIT; (iii) AND WITHOUT REGARD TO THE CAUSE OR CAUSES THEREOF, INCLUDING, BUT NOT
LIMITED TO, PREEXISTING CONDITIONS (WHETHER SUCH CONDITIONS BE PATENT OR LATENT);
THE UNSEAWORTHINESS OF ANY VESSEL OR VESSELS (WHETHER OR NOT PREEXISTING);
THE UNAIRWORTHINESS OF ANY AIRCRAFT; BREACH OF REPRESENTATION OR WARRANTY
(EXPRESS OR IMPLIED); BREACH OF CONTRACT; BREACH OF DUTY (STATUTORY,
CONTRACTUAL, COMMON LAW OR OTHERWISE); STRICT LIABILITY; CONDITION OF RUIN OR
DEFECTIVE PREMISES, EQUIPMENT, FACILITIES, OR APPURTENANCES OF ANY PARTY UNDER
ANY CODE, LAW OR (WHETHER OR NOT SAID CONDITION IS PREEXISTING AND/OR LATENT,
PATENT OR OTHERWISE); THE LOADING OR UNLOADING OF PERSONS OR CARGO; TORT; OR
THE NEGLIGENCE OR FAULT OF ANY PARTY (AS DEFINED AT THE BEGINNING OF THIS
ARTICLE 14; OR ANY OTHER THEORY OF LEGAL LIABILITY.
Sellers total responsibility for any claims, damages, losses or liability arising out of or related
to its performance of this contract or the products or services covered hereunder shall not
exceed the purchase price.
15. MODIFICATION, RESCISSION & WAIVER:
The terms herein may not be modified or rescinded nor any of its provisions waived unless such
modification, rescission or waiver is in writing and signed by an authorized employee of Seller at its
office in Houston, Texas. Failure of Seller to insist in any one or more instances upon the performance
of any of the terms and conditions of the contract or the failure of Seller to exercise any of its rights
hereunder shall not be construed as a waiver or relinquishment of any such term, condition, or right
hereunder and shall not affect Sellers right to insist upon strict performance and compliance with
regard to any unexecuted portions of this contract or future performance of these terms and
conditions.
All orders must be accepted by an authorized employee of Seller. The rights and duties of the parties
and construction and effect of all provisions hereof shall be governed by and construed according to
the internal laws of the State of Texas. Any disputes which arise under this agreement shall be venued
in the District Court of Harris County, Texas or in the Southern District of Texas.

CAM/T&C/US/96 REV. 08/06

NAVCO

CT-NUT-B2
02/07 NP-3M

11

DISTRIBUTED VALVES

NOTES

12

NAVCO

CT-NUT-B2
10/05 NP-3M

DISTRIBUTED VALVES

DISTRIBUTED VALVES

VALVES & MEASUREMENT

3250 Briarpark Drive, Suite 300
Houston, Texas 77042
USA Toll Free 800 323 9160
For the most current contact and location information go to: www.c-a-m.com

Cameron, Valves & Measurement Printed in Canada 02/07-NP-3M CT-NUT-B2