Tga

Prepared by:Priyanka jain
THERMOGRAVIMETRIC ANALYSIS
CONTENTS: INTRODUCTION PRINCIPLE TYPES INSTRUMENTATION METHODOLOGY APPLICATIONS STRENGTH AND LIMITATION
INTRODUCTION
DEFINITION:TGA is a technique in which mass of a substance is monitored as a function of temperature or time as the sample specimen is subjected to a controlled temperature program in a controlled atmosphere. It is a technique in which upon heating a material, its weight increases or decreases. TGA is commonly used to determine selected characteristics of materials that exhibit either mass loss or gain due to decomposition, oxidation, or loss of volatiles (such as moisture).
PRINCIPLE OF THERMOGRAVIMETRIC ANALYSIS
Large number of chemical substances invariably decomposes upon heating and this idea of heating a sample to observe weight changes is the underlying principle of TGA.
TYPES OF TGA
1. Static (or Isothermal) TGA 2. Dynamic TGA 1. STATIC (ISOTHERMAL) TGA:- In this technique sample is maintained at a constant temp. for a period of time during which any changes in weight are observed. 2. DYNAMIC TGA:- In this sample is subjected to under controlled continuous increase in temp. conditions (linear with time).
INSTRUMENTATION
1.A high precision balance 2.Furnace 3.A sensitive recorder
Thermo gravimetric analyzer also known as thermobalance.
A Thermo gravimetric analyzer consists of a sample pan that is supported by a precision balance. The pan resides in a furnace and is heated or cooled during the experiment. The mass of the sample is monitored during the experiment. A sample purge gas controls the sample environment. The gas may inert or a reactive gas that flows over the sample and exist through an exhaust.
A TGA analysis is performed by gradually raising the temperature of a sample in a furnace as its weight is measured on an analytical balance that remains outside of the furnace. In TGA, mass loss is observed if a
thermal event involves loss of a volatile component. Chemical reactions,

such as combustion, involve mass losses, whereas physical changes, such as melting, do not. The weight of the sample is plotted against temperature or time to illustrate thermal transitions in the material such as loss of solvent and plasticizers in polymers, water of hydration in inorganic materials, and finally, decomposition of the material.
RECORDING BALANCES
These are of two types:-
Deflection type
Null Type
Beam type
Helical type
Cantilevered beam
Torsion wire
DEFLECTION TYPE:This type of balance is based on conventional analytical balance consist of beam type, helical spring, cantilever beam and torsion wire involving the conversion of deviation directly into a record of weight change.
NULL TYPE:It consists of a sensing element which detects any slightest deviation of the balance beam and provides the application of restoring force, directly proportional to the change in weight, there by returning the beam to its original null point. The restoring force is subsequently recorded.
FURNACE
Furnace is designed in such a way for maintaining a fixed temp. or a predetermined linear heating programme. (10 C 600 C/h). The temperature control of the furnace is achieved via a thermocouple mounted very close to the furnace winding.
S.No. Specification Max temp.C
1. 2.
3.
Nickel-chrome (Nichrome) Platinum-Rhodium

Graphite- tube furnace
1100 1450
>1500
RECORDER
The recording device must be such so as to:-
Record both temp. and weight continuously.

Make a definite periodic record of the time.
METHODOLOGY
Example The thermogram for calcium oxalate(CaC2O4.H2O) Decomposition of calcium oxalate monohydrate exhibits three weight losses with temperature in an inert atmosphere (e.g. N2). CaC2O4 H2O CaC2O4 CaCO3 CaO
Calcium oxalate monohydrate (20mg)
H2O, (12.3%, 2.46 mg)
CO (19.2%,3.84mg)
CO2 (6.02%,3.01 mg)
Weight decreases as lose H2O, CO and CO2
The successive plateaus correspond to the anhydrous oxalate (100250 C), calcium carbonate (400- 500C) and finally calcium oxide (700-850C). In other words, these plateaus on the decomposition curve designate 2 vital aspects, namely: 1)Clear indication constant weight 2)Stable phase within a specified temperature interval Step-1 The water of hydration from calcium oxalate monohydrate is lost which corresponds to 2.46mg (12.3%) equivalent to 1 mole of water in the temperature range 100-250C. Step-2 One mole of carbon monoxide is evolved subsequently from calcium oxalate, corresponding to 3.84 mg (19.2%) in the temperature range 400-500C. The 19.2% weight loose that occurred between 400-500C should corresponds to 19.2% of the original formula weight of 146.Therefore the product being given out has a formula weight of 1.92*146=28.0 that corresponds to carbon monoxide.
Step-3 Finally, a mole of carbon dioxide is evolved from calcium carbonate that corresponds to 6.02 mg (3.01%) of the original formula weight of 146.Therefore ,the product being evolved has a formula weight of 0.301*146=43.946(=44), and it corresponds to carbon dioxide. In situation whereby an inert material is present along with a pure substance, from the generated thermogram the composition of the mixture may be derived from the percentage weight variation which takes place relative to the percentage weight variation observed with the pure compound (A), by employing the following expression:
Compound A (wt %)={ %wt.change for mixture/%wt.change for pure compound A}*100(%)
MECHANISM OF WEIGHT CHANGE IN THERMOGRAVEMETRIC ANALYSIS

Weight Loss:
Decomposition: The breaking apart of chemical bonds. Evaporation: The loss of volatiles with elevated temperature. Reduction: Interaction of sample to a reducing atmosphere (hydrogen, ammonia, etc). Desorption.
Weight Gain: Oxidation: Interaction of the sample with an oxidizing atmosphere -Absorption
FACTORS AFFECTING TG CURVE

Heating rate Sample size (Increases the temp at which sample decomposition occurs) Particle size of sample Packing Crucible shape Gas flow rate (Affects the progress of the reaction)
EVOLVED GAS DETECTION AND ANALYSIS

The analysis of the purge gas exit stream from thermogravimetric analyzers is useful in establishing mechanism and stoichiometric relationships of thermal decompositions. In evolved gas analysis(EGA),
the absolute identities of the gaseous components are determined,

whereas in evolved gas detection(EGD), the presence of only a single, preselected component of the evolved gas is sensed. An appropriate analyzer may be coupled to a thermogravimetric system for performing either EGA or EGD. The resulting hyphenated methods are powerful analytical tools. Two analyzers Mass spectrometers(MS) and flame ionization detectors
(FID) are successfully coupled to TG systems.

The TG-MS combination is used for evolved gas analysis whereas the TG-FID combination provides evolved gas detection.
APPLICATIONS
Evaluation of Gravimetric precipitates Evaluation of suitable standards Testing of purity of samples Determine stability of compounds Analysis of polymeric material (also polymer stability) Phase transition measurement Compositional analysis
Reaction Kinetics (computer software allows the computation ofdw/dt,

which is imp. In kinetic interpretation of reactions and processes. Determining moisture, volatile and ash contents
STRENGTH OF THERMOGRAVIMETRIC ANALYSIS
Any type of solid can be analyzed, with minimal sample
preparation
Qualitative or quantitative analysis
LIMITATIONS OF THERMOGRAVIMETRIC ANALYSIS
Data interpretation not always straightforward. Analysis
in combination with other techniques is often helpful.

Tga

Uploaded by

Copyright:

Available Formats

Tga

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tga

Uploaded by

Copyright:

Available Formats

Prepared by:Priyanka jain

PRINCIPLE OF THERMOGRAVIMETRIC ANALYSIS

1.A high precision balance 2.Furnace 3.A sensitive recorder

Thermo gravimetric analyzer also known as thermobalance.

thermal event involves loss of a volatile component. Chemical reactions,

These are of two types:-

Nickel-chrome (Nichrome) Platinum-Rhodium

The recording device must be such so as to:-

Record both temp. and weight continuously.

Calcium oxalate monohydrate (20mg)

H2O, (12.3%, 2.46 mg)

CO2 (6.02%,3.01 mg)

Weight decreases as lose H2O, CO and CO2

MECHANISM OF WEIGHT CHANGE IN THERMOGRAVEMETRIC ANALYSIS

FACTORS AFFECTING TG CURVE

EVOLVED GAS DETECTION AND ANALYSIS

the absolute identities of the gaseous components are determined,

(FID) are successfully coupled to TG systems.

Reaction Kinetics (computer software allows the computation ofdw/dt,

STRENGTH OF THERMOGRAVIMETRIC ANALYSIS

Any type of solid can be analyzed, with minimal sample

LIMITATIONS OF THERMOGRAVIMETRIC ANALYSIS

Data interpretation not always straightforward. Analysis

in combination with other techniques is often helpful.

You might also like