Wcet Certification

Wi reless Communi Cati on engi neeri ng teChnologi es (WCET)
Candidates Handbook
1
Quick Reference Guide
Contact Information
IEEE WCET Certifcation Program
IEEE Communications Society (IEEE ComSoc)
3 Park Avenue, 17th Floor
New York, NY 10016 USA
tel: +1 212 705 8900
fax: +1 212 705 8999
email: [email protected]
website: www.ieee-wcet.org
Professional Examination Service (PES)
475 Riverside Drive, 6th Floor
IEEE WCET Testing Offce (431)
tel: +1 866 285 0429 or +1 212 367 4369
fax: +1 917 305 9879
Prometric
IEEE WCET Program
1501 South Clinton Street
Baltimore, MD 21224 USA
tel: +1 800 532 2169*
website: www.prometric.com/wcet
*See Prometric Regional Contact Center Information for numbers outside the U.S., U.S. territories or Canada.
Important 2011 Dates
Testing Window Application Period Application Deadline
20 March - 16 April 2011 Through 4 March 2011
4 March 2011
by 23:59 p.m. UTC
2 October - 29 October 2011 Through 16 September 2011
16 September 2011
by 23:59 p.m. UTC
Examination and Other Fees
IEEE WCET total examination fee for IEEE and IEEE ComSoc members US$450*
IEEE WCET total examination fee for nonmembers US$500*
Duplicate certifcate Processing plus shipping fee
Review of examination score US$50
Online practice examination US$50
*A nonrefundable US$95 application fee is included in the total examination fee.
Copyright 2010. IEEE. All Rights Reserved.
Candidates Handbook
2
Application, Scheduling/Rescheduling, Withdrawal, Refund, and Other Information
Apply for the IEEE WCET certifcation Visit www.ieee-wcet.org
Update your contact information Visit www.ieee-wcet.org
Schedule an appointment Visit www.prometric.com/wcet or
Call the number listed on your Authorization to
Schedule notice
Cancel or reschedule an appointment Visit www.prometric.com/wcet or
Call the number listed on your Authorization
to Schedule notice
Withdraw your IEEE WCET certifcation
application (no appointment) Visit www.ieee-wcet.org
Refund requests Visit www.ieee-wcet.org
View/print score report Visit www.ieee-wcet.org
Request a duplicate certifcate Email [email protected]
Request a review of
examination score Visit www.ieee-wcet.org
Special accommodation request Email PES at [email protected] or
Call +1 866 285 0429 or +1 212 367 4367
General customer service Email PES at [email protected] or
Call +1 866 285 0429 or +1 212 367 4367
Candidates Handbook
3
Contents
Introduction Certifcation Overview 6
IEEE WCET Examination Overview 7
IEEE WCET Certifcation Denial and Revocation Appeals 10
Applying for the
Examination
Eligibility Recommendations 12
Application and Examination Fees 13
Testing Windows and Application Deadlines 14
Special Accommodation Requests 14
Completing and Submitting the Application 15
Updating Contact Information 16
Application Audit Process 17
After Applying for the
Examination
Schedule an Appointment 19
Testing Center Locations 20
Prometric Regional Contact Center Information 21
Appointment Changes, Withdrawals, and Refunds 22
Studying for the
Examination
Examination Preparation 27
On Examination Day Presenting Positive Proof of Identity 29
Testing Center Rules 30
Security Acknowledgement and Agreement 31
Inclement Weather and Local or National Emergencies 32
Candidates Handbook
4
After the Examination Receiving Examination Results 34
Retaking the Examination 34
Duplicate Score Reports/Replacement Certifcates 35
Review of Examination Score 36
Appendix A IEEE WCET Examination Specifcations 38
Appendix B International Testing Center Locations 50
Appendix C Sample References 57
Appendix D
Appendix E
Appendix F
IEEE
Communications Society
Top 5 Reasons for
Organizations to support the
IEEE WCET credential
Sample Examination Questions 58
IEEE WCET Glossary
Constants, Conversions and Equations 60
Special Testing Accommodation Request Form 67
Documentation of Disability-Related Needs by
Qualifed Professional 68
Supporting Documentation of Wireless Communication
Engineering Experience 69
About the IEEE Communications Society 71
Supporting Wireless Communication Engineering Technologies
Certifcation 73
Introduction
Candidates Handbook
6
Introduction
Certifcation Overview
What Is Certifcation?
Certifcation is a voluntary process by which individuals are assessed against predetermined standards
for knowledge/skills/competencies and granted a time-limited credential. Certifcation normally
requires assessment, including testing, and an evaluation of education and/or experience. Certifed
individuals are usually issued a certifcate attesting that they have met the standards of the credentialing
organization and are entitled to make the public aware of their credentialed status, usually through the
use of acronyms (e.g., WCP Wireless Communication Professional) after their names.
This certifcation differs from an assessment-based certifcate program in that the IEEE Wireless
Communication Engineering Technologies Certifcation includes a work experience component. In
contrast, an assessment-based certifcate program is a relatively short, non-degree granting program
that provides instruction and training to aid individuals in acquiring knowledge/skills/competencies and
designates that individuals have passed an end-of-program assessment derived from the learning/
course objectives. Although assessment may be an integral part of a certifcate program, the primary
purpose of such a program is to provide instruction and training.
Why Is Certifcation Desirable?
Certifcation sets those with the credential apart fromor abovethose without it. There are a number
of advantages to obtaining certifcation. Certifcation becomes a public recognition of professional
achievement, both within and outside the profession. For many individuals, achieving certifcation
becomes a personal professional goal, a way to test ones knowledge and to measure it against ones
peers. Others see certifcation as an aid to career advancement.
The IEEE WCET Certifcation Program
Global communication is the defning political and economic force in the world today. It requires new
ways of thinking and responding. For engineering professionals, recognizing and understanding this
phenomenon is fast becoming a job requirement.
The IEEE Communications Society (IEEE ComSoc) has designed the IEEE WCET certifcation program to
address the worldwide wireless industrys growing and ever-evolving need for qualifed communication
professionals who can demonstrate practical problem-solving skills in real-world situations. Individuals
who achieve this certifcation will be recognized as having the required knowledge, skill, and ability to
meet wireless challenges in various industry, business, corporate, and organizational settings.
To assist with the development of the IEEE WCET certifcation program, IEEE ComSoc has contracted
with Professional Examination Service (PES), a testing organization with more than 60 years of
experience in the development and administration of licensing and certifcation programs. IEEE
ComSoc has also contracted with Prometric, the leading global provider of comprehensive testing
and assessment services, to deliver the IEEE WCET examination via computer at their testing centers
throughout the world.
Candidates Handbook
7
Purpose and Use of Certifcation
The IEEE WCET certifcation shows that the individual has demonstrated mastery of the internationally
recognized body of wireless communication knowledge and has accepted the challenge to stay
informed of new developments in the wireless feld.
The WCET certifcation is completely voluntary. Organizations or individuals incorporating IEEE WCET
certifcation as a condition of employment or advancement do so of their own volition. Individuals
should determine for themselves whether certifcation, including eligibility and recertifcation
requirements, when coupled with any other requirements imposed by individuals or organizations,
meets their needs and complies with applicable laws.
The IEEE WCET certifcation designation is a visible reminder to peers and co-workers of the individuals
signifcant professional achievement. IEEE WCET-certifed professionals should proudly display their
certifcates and use the WCP credential on business correspondence.
IEEE WCET Examination Overview
IEEE WCET Examination
The IEEE WCET examination is administered on computer and consists of 150 scored multiple-choice
questions plus 15 unscored pretest questions randomly distributed throughout the examination (a
total of 165 questions). Test questions on the examination are in English and are based on the most
recently published test specifcations (see Appendix A). Each question lists four possible answers,
only one of which is the correct or best possible answer. The answer to each question can be
derived independently of the answer to any other question. Four (4) hours are allotted to complete
the examination. A calculator will be available online for use during the examination. A brief tutorial
will be available prior to the start of the examination to instruct candidates on how to mark and
unmark answers, how to navigate through the examination, and how to use the calculator. A glossary
of commonly used wireless communication terms will be available via a link during the examination
process. This same glossary is also available on the website www.ieee-wcet.org.
A candidate must obtain a scale score of 500 or higher, on a scale of 200 to 800, in order to pass the
examination and receive his or her certifcation.
For those considering taking the IEEE WCET examination, IEEE ComSoc offers an online practice
examination. See the section on Studying for the Examination in this handbook for more information
on the practice examination.
Pretest Questions
A candidates test score is based on the responses to the 150 scored multiple-choice items. Pretest
questions are not counted in scoring. They are, however, essential in building the bank of IEEE WCET
test questions and are included on the examination in order to statistically assess their diffculty level
and effectiveness at discriminating between candidates who meet the passing standard and those
who do not. The information gathered in the pretest process determines whether the questions meet
statistical guidelines for inclusion on future examinations.
Candidates Handbook
8
On Test Day
On test day, candidates should answer easy questions frst and mark the more diffcult ones to return to
later. There is no penalty for guessing, so candidates should answer all the questions, if possible. There
are optional survey questions at the end of the examination that candidates are encouraged to answer.
Responses are confdential. The information collected is used for statistical purposes only.
IEEE WCET Examination Areas of Expertise
The IEEE WCET examination consists of questions in several different areas of expertise. A short
description of these areas and the examination weightings (the percentage of questions allocated to
each area of expertise) are presented below.
Area 1 (19-23%) - RF Engineering, Propagation, Antennas, and Signal Processing: Tasks
and knowledge related to: antennas, RF engineering, transmission, reception, propagation,
channel modeling, and signal processing.
Evaluate system performance and reliability; calculate path loss; evaluate the effects of different
fading and empirical path loss models; calculate and evaluate the effects on the received
signal of path-related impairments; determine parameters related to antennas or antenna
arrays; generate and evaluate coverage and interference prediction maps; develop and analyze
procedure to optimize the coverage of a radio; make RF system measurements.
Area 2 (19-23%) - Wireless Access Technologies: Tasks and knowledge related to wireless
access networks, especially the physical, MAC, and link layers.
Analyze building blocks, multiple access, mobility management, and spectrum implications in
wireless access system design; analyze design considerations to optimize capacity/coverage;
design and analyze a wireless access system; analyze the required bandwidth for a wireless
system and tradeoffs; analyze wireless access technology standards, their features, and evolution.
Area 3 (19-23%) - Network and Service Architecture: Tasks and knowledge related to
network infrastructure, including core networks; service frameworks such as IMS; and application
architectures such as voice, video streaming, and messaging. All-IP services architecture as in
3GPP Rel 6 and beyond, including Enhanced Packet Services (EPS) as in 3GPP Rel 8 LTE (Long
Term Evolution) and EPC (Enhanced Packet Core).
Analyze service platforms, IP addressing schemes for various technologies; design and test
quality of service (QoS); select and test a load-balancing scheme; analyze IP routing and ad hoc
routing and mesh protocols; perform capacity planning, error tracking, and trace analysis; analyze
the evolution of mobile networks to enable IP multimedia.
Area 4 (11-15%) - Network Management and Security: Tasks and knowledge related to
fault, confguration, account, performance, maintenance, security management, management
availability, and operation support systems (examples include network service assurance and
provisioning).
Candidates Handbook
9
Design a fault monitoring system and a performance monitoring system; develop/specify types
and methods of alarm reporting; compute availability and reliability metrics; assess the potential
impacts of known security attacks; plan corresponding solutions to known security attacks.
Area 5 (6-8%) - Facilities Infrastructure: Tasks and knowledge related to the specifcation,
design, implementation, and operation of facilities and sites.
Determine power consumption; analyze electrical protection requirements and design the
electrical protection layout for a wireless telecommunications facility; determine the required
antennas for the facility and their positions; develop a specifcation for the required structure
for a wireless base station facility; determine the required cable, antennas, and materials to
implement an in-building wireless network; evaluate equipment compliance with industry
standards, codes, and site requirements.
Area 6 (6-8%) - Agreements, Standards, Policies, and Regulations: Tasks and knowledge
related to externally imposed compliance requirements and conformance testing, including
interoperability.
Assess service and equipment quality; prepare specifcations for purchasing services and
equipment and evaluate the responses; verify compliance with regulatory requirements; select
and analyze frequency assignments; perform standardized homologation tests as required by
regulatory or standardization bodies; evaluate compliance with health, safety, and environmental
requirements; perform conformance/interoperability analyses of systems and components;
analyze the use of licensed vs. unlicensed spectrum; obtain licenses and permits.
Area 7 (8-12%) - Fundamental Knowledge: Basic knowledge that a wireless communications
engineer would use in order to perform tasks across all domains.
Apply basic concepts related to electrical engineering, communications systems, and general
engineering management.
Examinations are reviewed by a panel of IEEE WCET subject matter experts to ensure that the questions
are current and refect the published test specifcations. See Appendix A for the complete version of
the examination specifcations.
Candidates Handbook
10
IEEE WCET Certifcation Denial and Revocation Appeals
Denial or Revocation of IEEE WCET Certifcation
Applications may be denied or certifcations revoked for any of the following reasons:
Falsifcation or misrepresentation of education and/or work experience or other information on
the examination application;
Violation of testing procedures;
Failure to pass the certifcation examination; or
Failure to meet recertifcation requirements.
Candidates whose applications are denied or certifcations revoked for any of the above reasons will be
notifed in writing. Candidates may appeal the decision to the IEEE WCET Appeals Board by submitting
an appeal in writing. Appeals must:
Be in writing, signed by the candidate;
Be sent to IEEE Communications Society - WCET by certifed mail;
Explain the specifc reason(s) for appeal;
Be accompanied by evidence or other pertinent information refuting the original decision; and
Be postmarked no later than ten (10) business days after the notifcation date on the letter.
Appeals should be addressed to:
IEEE WCET Appeals Board
IEEE Communications Society
Appeals Board for IEEE WCET Certifcation Denial and Revocation
Appeal requests will be reviewed by the WCET Appeals Board. The Appeals Board is composed of
two WCET Steering Committee members or their designees, one WCET professional, one WCET staff
member, and an attorney if deemed appropriate.
The Appeals Board will review the request within 15 business days of receipt. During the review of the
appeal, the Board may request additional documentation as needed. All information received will be
considered strictly confdential and will be used only to review the appeal.
Appeals Decision
Candidates submitting an appeal will receive written notifcation of the decision within 30 days of
receipt of the request. This notifcation will also be provided to the IEEE WCET Steering Committee. The
IEEE WCET Appeal Boards decision is fnal.
Applying
for the
Examination
Candidates Handbook
12
Applying for the Examination
Eligibility Recommendations
The IEEE WCET is a broad-based examination that assesses knowledge of the entire wireless
communication engineering feld. If you have never been a wireless communication engineering
practitioner, or do not plan to become one, you will need to evaluate whether it is appropriate for you
to take this examination. The IEEE WCET examination is intended for professionals who develop and
implement all types of wireless communication in countries throughout the world.
The WCET exam has been constructed by subject matter experts and hiring managers to assess the
skills and knowledge of practicing wireless communications professionals with the equivalent of a
college or university degree and three or more years of professional experience. The decision as to
whether an individual is qualifed to take the exam is an assessment that should be made by the
applicant with this understanding. In making the decision, an applicant should consider the following
factors.
The college or university should be accredited in the country in which it is located.
Graduate-level educational experience may be comparable to an equivalent period of
professional work experience.
Professional wireless experience means that at least 51% of the candidates daily activities are
in the feld of wireless communication engineering and those activities are at the professional
level.
A thorough familiarity with the topics covered by the exam, as described in Appendix A of this
Handbook, is necessary to achieve success on the examination.
Success on the practice exam, available on line, has been shown to be an indicator that a
candidate is probably qualifed to take the certifcation examination.
Applicants with a combination of a bachelors degree or comparable education plus three or
more years of professional experience or other similar level of preparation have been more
successful on the examination than those with less preparation.
The examination refects current wireless communication engineering practices. Although the three
years of professional wireless communication engineering experience need not be current or
sequential, recent experience is more likely to coincide with the content of the examination.
Candidates with questions about the recommended eligibility criteria can email [email protected].
Ultimately, however, it is up to each candidate to decide if his or her level of education and experience
qualifes the candidate to apply for the examination.
The IEEE WCET certifcation program does not discriminate on the basis of race, religion, national origin,
gender, sexual orientation, or disability. IEEE Membership is not a requirement to qualify to take the
exam and nothing in the preceding statements should be so interpreted.
Candidates Handbook
13
Application and Examination Fees
The total examination fee is US$450 for IEEE or IEEE ComSoc members and US$500 for nonmembers.
The total examination fee includes a US$95 nonrefundable application fee. (See the table below.)
If you are not a member of IEEE and wish to become one, visit www.ieee.org and click on the
Membership tab to enroll before you apply for the IEEE WCET certifcation examination. Candidates
must be full members of IEEE at the time of application in order to receive the discount and must
include their IEEE membership number in the relevant area on the application. If your membership
number is valid, you will be able to complete the application and pay the US$450 fee. If your
membership number is not valid, you will be able to complete the application but will need to pay the
US$500 fee.
Organizations or employers may sponsor candidates for the examination. Candidates who are being
sponsored by an employer will receive a promotional code from their sponsor. Candidates should
enter this promotional code (and credit card information if applicable) in the payment section of the
application.
2011 IEEE WCET Examination Fees
Application Fee
(nonrefundable)
Exam Fee Total Exam Fee
IEEE or IEEE ComSoc
Member
US$95 US$355 US$450
Nonmember US$95 US$405 US$500
Sponsored
Candidates
Check with your employer Check with your employer
Check with your
employer
Payment Methods
Examination fees are due at the time of application submission. Applicants may pay by VISA,
MasterCard, or American Express.
Candidates Handbook
14
Testing Windows and Application Deadlines
The testing window is the time period during which the WCET examination is offered. In 2011 and
future years, it is anticipated that there will be two testing windows annually. The 2011 testing windows
run from 20 March through 16 April and from 2 October through 29 October. Candidates may test on
any date during the testing window, depending upon the availability of appointments at the Prometric
testing centers.
Candidates may apply for either of the next two upcoming testing windows. For example, in early
2011, applicants can choose the Spring or Fall 2011 testing window. Once the Spring 2011 application
window closes, the choice will be for the Fall 2011 or Spring 2012 testing window. Note that each
testing window has an application deadline, as shown in the table below. Application for the Spring
testing window must be completed by 23:59 p.m. UTC on 4 March 2011. Application for the Fall 2011
testing window can be made at any time but must be completed by 23:59 p.m. on 16 September
2011.
Testing Window Application Period Application Deadline
20 March - 16 April 2011 Through 4 March 2011
4 March 2011
by 23:59 p.m. UTC
2 October - 29 October 2011 Through 16 September 2011
16 September 2011
by 23:59 p.m. UTC
Special Accommodation Requests
IEEE ComSoc will, to the best of its ability, accommodate candidates with disabilities who need special
arrangements to take the examination. Auxiliary aids and services will be provided except where these
may fundamentally alter the examination or result in an undue burden.
Prometric may be unable to comply with special accommodation requests made by candidates taking
the examination where local operating conditions or local laws and customs render such requests
unlawful, impossible, or economically unfeasible to perform.
A special accommodation request must be made by the candidate at the time of application by marking
the appropriate box on the online application. Candidates who request special accommodations must
also submit the Special Testing Accommodation Request form and the Documentation of Disability-
Related Needs by Qualifed Professional form (located in Appendix E of this handbook and in the
online application). The Documentation of Disability-Related Needs form must be completed by a
professional with a license or credential appropriate to diagnose and treat the candidates disability.
The nature of the disability, identifcation of the test(s) and protocols used to confrm the diagnosis, a
description of past accommodations made for the disability, and the specifc testing accommodations
requested must be included. All information submitted will be kept confdential. Full details regarding
special accommodations can be found on the website www.ieee-wcet.com.
Candidates must mail, email or fax special accommodation information to PES within ten (10)
business days of the date they submit the application. Candidates who do not provide the requested
Candidates Handbook
15
information within the specifed time frame will forfeit all fees. See the Incomplete Applications section
of this handbook. Contact information for PES may be found on the frst page of this handbook.
Completing and Submitting the Application
Please read this handbook carefully before applying to take the examination.
Submission of an application attests that you have read this Handbook and agree to be bound by all
policies and procedures set forth herein. It also attests that all information presented in the application
is correct and complete and that the work history you report represents professional level experience.
Submission of your application indicates your agreement to providing supporting documented evidence
of your education and/or work experience if requested to do so by IEEE ComSoc and to abide by
its decision should the education, work experience, or other submission information be judged to
be misrepresented or fraudulent. Further, you are granting permission to IEEE ComSoc to make any
inquiries that may be necessary to verify your submission information. Finally, you are agreeing to abide
by the rules and decision of IEEE ComSoc and understand that falsifcation of information on your
application is grounds for refusing or revoking certifcation.
To apply for the IEEE WCET examination, go to www.ieee-wcet.org and click on the Application link.
When completing the application, you will be asked to provide contact information, and payment
information. You will later be asked to answer some demographic questions. Verify that the information
you have entered online is correct before you submit the application. Be sure to print and keep a copy
of the Candidate Profle page when prompted, since this page is proof that your application is complete
and has been submitted.
All candidates who submit an application will be issued an IEEE WCET ID number and receive a
confrmation email acknowledgement within 24 hours indicating that their application was successfully
transmitted. Candidates will subsequently receive via email an Authorization to Schedule notice
providing information on how to schedule the examination. The IEEE WCET ID number will appear on
the Candidate Profle page, in the confrmation email acknowledgement, and on the Authorization to
Schedule notice. This IEEE WCET ID number will be required to review and modify your application
and to schedule your examination. This IEEE WCET ID number will also become your unique ID
number for any future IEEE WCET examinations as well as for recertifcation.
When completing the application, make sure that the name you enter on your application exactly
matches the unexpired government-issued ID that you will present at the testing center. Although
candidates can review and modify their contact information, for security reasons name changes cannot
be made online after the application has been submitted. See the section on Name Changes in this
handbook for instructions on how to make a name change.
Application Availability
For 2011, the application for the Spring testing window will be available until 23:59 p.m. UTC on
4 March 2011. The application for the Fall testing window will be available until 23:59 p.m. on 16
September 2011. The application availability for future testing windows will be posted at
www.ieee-wcet.org.
Candidates Handbook
16
Applicants are strongly advised to apply online well in advance of the deadlines, since the volume of
applications on the last day of the application period can be heavy. IEEE ComSoc and PES are not
responsible for system problems (e.g., web site down or slow, etc.).
Authorization to Schedule
Authorization to Schedule notices will be emailed to all candidates within two (2) days of receipt of a
completed application. This notice will provide candidates with the information needed to schedule an
examination. Candidates can also access this notice online within two (2) business days of submitting
their application. To access the notice, go to www.ieee-wcet.org.
Incomplete Applications
Applications that require additional documentation are considered incomplete until such information
is received and processed. PES will send candidates whose applications are incomplete an email
indicating what additional documentation is required. If you need to submit the Special Testing
Accommodations form, the Documentation of Disability-Related Needs form, the Supporting
Documentation form, or other information, these forms must be mailed, emailed, or faxed to PES
within ten (10) business days of the date you applied or are notifed by PES. Candidates who do not
provide their supporting documents within the specifed time frame will forfeit all fees.
It is strongly recommended that candidates use a traceable mailing method (e.g., certifed or registered
mail or expedited mail service that requires a signature) and/or keep a copy of the fax confrmation
page to verify delivery.
Updating Contact Information
Address Changes
If a candidates address changes at any time during the application period or testing window, the
candidate should go online to update this information in the application. Address changes should
be made as soon as they are known since certifcates are mailed to the postal address listed on the
application.
Name Changes
It is important to notify PES of any name changes as soon as possible for two reasons: (1) if the name
on your unexpired government-issued ID does not match the name on your Authorization to Schedule
notice, you may be denied admission into the testing center, and (2) the score report and certifcate
will not display your name correctly.
To correct minor changes in your name (e.g., incorrect middle initial, missing hyphen, etc.) as printed
on your email acknowledgement or Authorization to Schedule notice, email PES at wcetapp@proexam.
org to provide them with the correction(s) at least ten (10) business days before your examination
appointment. For security reasons, name changes cannot be made online after the application has
been submitted.
Candidates Handbook
17
To change your name because of a legal name change (e.g., marriage, divorce), you must submit
notarized documentation to PES by mail, email, or fax at least ten (10) business days before your
scheduled examination appointment. It is strongly recommended that candidates use a traceable
mailing method (e.g., certifed or registered mail or expedited mail service that requires a signature)
and/or keep a copy of the fax confrmation page to verify delivery.
Do not send originals because these documents cannot be returned. When submitting a name change,
make sure that you have an unexpired government-issued ID that matches the requested name. When
appearing for the examination appointment, candidates without valid ID will not be admitted to take the
examination and will forfeit all fees.
Application Audit Process

Submission of an application indicates your agreement to comply with the terms of the audit process.
All applications are potentially subject to an audit, although only a percentage of applications are
selected. The selection of an application for an audit is made at random. Candidates will be notifed by
email if their application has been selected. All audits will occur after an application period closes but
before the subsequent testing window begins.
In keeping with the IEEE Code of Ethics, audits are primarily intended to ensure that a candidate has
not provided false or misleading information on the application. You may therefore be asked to provide:
evidence of your diploma or equivalent educational certifcation; documentation of your professional
work experience, signed by your supervisor or manager; documentation of graduate-level educational
experience if that is reported instead of professional work experience; or other written evidence to
support the information you provided on your application.
If you successfully complete the audit, you will be eligible to sit for the examination. If you fail to meet
the audit requirements, you will forfeit both the application and the examination fees.
Candidates Handbook
18
After
Applying
for the
Examination
Candidates Handbook
19
After Applying for the Examination
Schedule an Appointment
Examination appointments may be scheduled online or by phone. When scheduling an appointment,
the following information will be required:
Your name exactly as it is printed on the Authorization to Schedule notice and the unexpired
government-issued ID you will use to confrm your identity at the testing center;
Your IEEE WCET ID number as it is listed at the top of the Authorization to Schedule notice;
Your daytime telephone number; and
The name of the examination sponsor (IEEE Communications Society).
Online scheduling is encouraged because it is faster and more effcient. An email address is required
to schedule online. Candidates who schedule online will receive an email confrming their examination
appointment and their confrmation number. To schedule online, go to www.prometric.com/wcet and
click on Schedule an Exam.
Your appointment confrmation number is different from your IEEE WCET ID number. Make sure you
retain your appointment confrmation number since it is required to confrm, reschedule, or cancel an
appointment.
Those scheduling an appointment within 48 hours of the end of the application window must do so
by phone only. Examination appointments can be scheduled by phone Monday through Friday, 8:00
a.m. to 8:00 p.m. (Regional Contact Center Time). To schedule by phone, call Prometric at the number
listed on your Authorization to Schedule notice or contact the appropriate Regional Contact Center. Each
Prometric Regional Contact Center serves many different countries. Candidates should use the table
on the following page to locate the country in which they will test and then contact the corresponding
Regional Contact Center.
Candidates scheduling by phone will not receive written confrmation of their appointment unless they
have provided an email address, so it is imperative to note the appointment details and appointment
confrmation number. Please retain your appointment confrmation number. This number differs from
your IEEE WCET ID number and is required to confrm, reschedule, or cancel an appointment. It is
highly recommended that candidates confrm examination appointments within 48 hours of making
them. Confrmations can be made online at www.prometric.com/wcet, by phoning the number listed on
your Authorization to Schedule notice and selecting the voice prompt to confrm an appointment (your
appointment confrmation number will be required), or by contacting your Regional Contact Center.
If you lose your confrmation number, you can confrm your appointment by contacting your Regional
Contact Center. Candidates should verify their appointments as soon as possible, but no later than three
(3) business days before the scheduled examination.
Candidates who cancel their examination appointments but do not request a refund will forfeit all fees.
Candidates who do not schedule an appointment and do not request a refund are considered no-show
candidates and forfeit all fees. For more information, see the Refunds section of this handbook.
Candidates Handbook
20
Schedule an Appointment Early
Candidates should schedule their examination appointment as soon as possible after receiving their
Authorization to Schedule notice. Candidates who delay scheduling their examination until the testing
window has opened run a signifcant risk of not being able to schedule their test at a time and location
of their choice. In rare instances, candidates who attempt to schedule/reschedule their appointment or
change their testing center location late in the testing window may fnd that they are unable to schedule
an examination date and location. If this occurs, candidates may withdraw from the examination
and apply for a 50% refund (US$177.50 for IEEE and IEEE ComSoc members and US$202.50
for nonmembers) of their examination fee (see the Withdrawals and Refunds sections in this
handbook). The US$95 application fee is nonrefundable.
Testing Center Locations
Testing centers are available in every state in the US and in all Canadian provinces. Testing centers are
also available at the international locations shown below. Candidates who are testing in the US and/
or Canada should visit www.Prometric.com/wcet or call +1 800 532 2169 to fnd the center closest to
them.
Physically locate or visit the test location before examination day to make sure you can fnd the testing
center and that you are aware of transportation and parking requirements. Driving directions can be
obtained through www.prometric.com or you can use MapQuest or a similar Internet site.
A complete list of international testing centers is available online, or see Appendix B in this handbook.
Locations Served by Regional Contact Centers
CENTER (1)
Africa
Benin
Botswana
Burkina Faso
Cameroon
Chad
Comoros
Congo
Cote DIvoire
Eritrea
Ethiopia
Gabon
Gambia
Ghana
Guinea
Guinea Bissau
Kenya
Lesotho
Madagascar
Malawi
Mali
Mauritius
Mozambique
Namibia
Niger
Nigeria
Reunion
Rwanda
Senegal
Sierra Leone
South Africa
Swaziland
Tanzania
Togo
Uganda
Zaire
Zambia
Zimbabwe
CENTER (2)
Europe
Armenia
Austria
Azerbaijan
Belarus
Belgium
Bulgaria
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Iceland
Ireland
Italy
Kazakhstan
Kyrgyzstan
Latvia
Lithuania
Luxembourg
Macedonia
Malta
Moldova
Netherlands
North Cyprus
Norway
Poland
Portugal
Romania
Russian Federation
Slovakia
Spain
Sweden
Switzerland
Tajikistan
Candidates Handbook
21
Turkey
Turkmenistan
Ukraine
United Kingdom
Uzbekistan
CENTER (3)
Latin America and
Caribbean
Argentina
Bolivia
Brazil
Chile
Colombia
Dominican Republic
Guatemala
Mexico
Panama
Peru
Venezuela

CENTER (4)
Middle East
Bahrain
Egypt
Israel
Jordan
Kuwait
Lebanon
Morocco
Oman
Qatar
Saudi Arabia
Syria
Tunisia
United Arab Emirates
Yemen

CENTER (5)
Southeast Asia
Bangladesh
Hong Kong
Indonesia
Malaysia
Nepal
Pakistan
Philippines
Singapore
Taiwan
Thailand
Vietnam
CENTER (6)
Peoples Republic of
China
Beijing
Chang Sai
Chengdu
Dalian
Guangzhou
Harbin
Jinan
Kunming
Nanjing
Shanghai
Wuhan
Xiamen
Xian

CENTER (7)
India
Ahmedabad
Allahabad
Bangalore
Calcutta
Chennai
Hyderabad
Mumbai
New Delhi
Trivandrum

CENTER (8)
Japan
Osaka
Tokyo
Yokohama

CENTER (9)
Republic of Korea
Seoul
Seoul Mapo-Gu
Taegu

CENTER (10)
Australia/New Zealand
Auckland
Melbourne
Sydney
(1) Prometric
Attn: PTC Registrations Africa
Noorderwagenplein 6
8223 AL - Lelystad
The Netherlands
Telephone: +31 320 239 593
Fax: +31 320 239 886
(2) Prometric
Attn: PTC Registrations Europe
Noorderwagenplein 6
8223 AL - Lelystad
The Netherlands
Telephone: +31 320 239 540
Fax: +31 320 239 541
(3) Prometric
Attn: PTC Registrations Latin America and Caribbean
3110 Lord Baltimore Drive
Baltimore, Maryland 21244 USA
Telephone: +1-443-751-4995
Fax: +1-443-751-5980
(4) Prometric
Attn: PTC Registrations Middle East
Noorderwagenplein 6
8223 AL - Lelystad
The Netherlands
Telephone: +31 320 239 530
Fax: +31 320 239 531
Prometric Regional Contact Center Information
*Note: Countries listed above do not necessarily have WCET testing centers. Please contact the Regional Contact Center
below for information or the nearest testing center locations.
Candidates Handbook
22
(5) Prometric
Attn: PTC Registrations South East Asia
PO Box 12964
50794 Kuala Lumpur
Malaysia
Telephone: +60-3-7628-3333
Fax: +60-3-7628-3366
(6) Prometric
Attn: PTC Registrations Peoples Republic of China
P.O. Box 84-056 Beijing
China International Examination Bureau 100084
Peoples Republic of China
Telephone: +8610-62799911
Fax: +8610-82520243
(7) Prometric Testing Private Limited
Attn: PTC Registrations India
2nd Floor
DLF Infnity Tower - A
Sector 25, Phase II
DLF City Gurgaon
Haryana 122002
India
Telephone: 0124-4147700
Fax: 0124-4147773
(8) R-Prometric, K.K.
Attn: PTC Registrations Japan
Kayabacho Tower 15th Floor
1-21-2 Shinkawa
Chuo-ku
Tokyo 104-0033
Japan
Telephone: +81-3-5541-4800
Fax: +81-3-5541-4810
(9) Korean-American Educational
Commission (KAEC) / Prometric
Attn: PTC Registrations Korea
Mapo-gu Yomni Dong 168-15
Seoul 121-090
Republic of Korea
Telephone: +82-2-2116-8331 or 1566-0990
Fax: +82-2-327-54029
(10) Prometric Regional Registration
Center (Region 6)
Attn: PTC Registrations Australia and New Zealand
21A-15-1 Faber Imperial Court
Jalan Sultan Ismail
50250 Kuala Lumpur
Malaysia
Telephone: +60-3-7628-2222
Appointment Changes, Withdrawals, and Refunds
Appointment Rescheduling
Candidates can reschedule examination appointments as often as they wish within their testing
window. Testing windows, however, cannot be changed. Testing center seats fll up quickly, so be sure
to reschedule as early as possible during the testing window. IEEE ComSoc shares the Prometric testing
centers with many other organizations, so reschedule your appointment as soon as possible.
There is no charge for rescheduling examination appointments but this must be done no later than
12:00 noon (Regional Contact Center time) fve (5) business days before the scheduled examination.
Candidates who do not reschedule examination appointments within that time frame and who do
not appear to take the examination will be considered no-show candidates and will forfeit all fees.
Candidates who attempt to reschedule their examination appointment late in the testing window
cannot be guaranteed that a seat will be available and risk forfeiting the examination fee. If this
occurs, candidates must withdraw from the examination and apply for a 50% refund (US$177.50 for
IEEE and IEEE ComSoc members and US$202.50 for nonmembers) of their examination fee (see
the Withdrawals and Refunds sections in this handbook) in order to not be considered no-show
Candidates Handbook
23
candidates. The US$95 application fee is nonrefundable. To reschedule your appointment, contact
Prometric at www.prometric.com/wcet, call the number listed in your Authorization to Schedule notice,
or contact your Prometric Regional Contact Center.
Testing Center Changes
Candidates can change their testing center location; however, doing so will cancel their previously
scheduled appointment. Candidates who attempt to change their testing center after the opening of
the testing window may not be able to reschedule at a time and test location of their choice. In rare
instances, candidates who attempt to change their testing center late in the testing window may fnd
that they are unable to schedule at the new location. If this occurs, candidates may withdraw from
the examination and apply for a 50% refund (US$177.50 for IEEE and IEEE ComSoc members and
US$202.50 for nonmembers) of their examination fee (see the Withdrawals and Refunds sections
in this handbook). The US$95 application fee is nonrefundable. To change testing centers, contact
Prometric at www.prometric.com/wcet, call the number listed on your Authorization to Schedule notice,
or contact your Prometric Regional Contact Center.
Withdrawals
Candidates who have a scheduled appointment, as well as those candidates who have not scheduled
an appointment with Prometric, may withdraw from the IEEE WCET certifcation examination. To
withdraw from the examination, candidates must do the following:
Candidates Who Have a Scheduled Examination Appointment
Candidates with a scheduled examination appointment may withdraw from the examination by
canceling their appointment on or before 12:00 noon (Regional Contact Center time), fve (5) business
days before their scheduled examination appointment. To cancel an examination appointment, contact
Prometric at www.prometric.com/wcet, call the number listed on your Authorization to Schedule notice,
or contact your Prometric Regional Contact Center. In addition to canceling your appointment with
Prometric, you must submit your Examination Withdrawal information online at
https://www2.proexam.org/IEEE. The withdrawal information must be submitted on or before the last
day of the testing window in order to receive a refund. See the following section on Refunds for more
information.
Candidates Who Have Not Scheduled an Examination Appointment
Candidates who have not scheduled an appointment and who wish to withdraw from the examination
must submit Examination Withdrawal information online at https://www2.proexam.org/IEEE. The
withdrawal information must be submitted on or before the last day of the testing window in order to
receive a refund. See the following section on Refunds for more information.
Refunds
Candidates who withdraw from the examination on or before the last day of the application period will
receive a full refund of their examination fee. The US$95 application fee is nonrefundable.
Candidates Handbook
24
To initiate the refund, candidates must submit their Examination Withdrawal information online on or
before the last day of the testing window at https://www2.proexam.org/IEEE.
Candidates who withdraw from the examination after the last day of the application period, but no
later than 12:00 noon (Regional Contact Center time) fve (5) business days before their examination
appointment, will receive a 50% refund (US$177.50 for IEEE and IEEE ComSoc members and
US$202.50 for nonmembers) of their examination fee. The US$95 application fee is nonrefundable.
To initiate the refund, candidates must submit their Examination Withdrawal information online at
https://www2.proexam.org/IEEE on or before the last day of the testing window.
Candidates who do not cancel their examination appointment within the specifed time frame and/or
do not appear for an examination appointment are considered no-show candidates and forfeit all fees.
Candidates who cannot take the examination due to a medical or personal emergency should refer to
Refunds for Medical or Personal Emergencies below.
Candidates who do not schedule an examination appointment with Prometric and/or who do not
submit their Examination Withdrawal information online on or before the last day of the testing window
are considered no-show candidates and forfeit all fees.
To receive a refund, candidates must submit their Examination Withdrawal information online at https://
www2.proexam.org/IEEE on or before the last day of the testing window.
All candidates will need to provide the following Examination Withdrawal information in order to obtain
a refund:
Candidates full name as it appears on the application;
Candidates postal and email addresses;
IEEE WCET ID number (found in the Authorization to Schedule notice);
Testing center location (if applicable);
Examination appointment date and time (if applicable); and
Date and time the appointment was canceled (if applicable).
No refunds will be issued unless candidates submit their Examination Withdrawal information within
the specifed timeframe. Refunds are issued no later than four (4) weeks after the close of the testing
window.
Refunds for Medical or Personal Emergencies
IEEE ComSoc recognizes that medical or personal emergencies may arise that prevent candidates from
rescheduling or withdrawing from an examination appointment. In such cases, candidates may request
a partial refund of their examination fee by submitting a written request to PES and including supporting
documentation as to the nature of the medical or personal emergency (e.g., accident report, medical
documentation, death certifcate). Refund requests resulting from medical or personal emergencies
will be reviewed on a case-by-case basis and candidates will be notifed by email of the outcome of
the request. If approved, candidates will receive a refund of their examination fee minus US$100.
Candidates Handbook
25
The US$95 application fee is nonrefundable. Examinations cannot be rescheduled to a future testing
window.
Medical or personal emergency refund requests must be made in writing to PES on or before the last
day of the testing window and must include a description of the situation and documentation of the
emergency or extenuating circumstance. Candidates whose examination appointments were scheduled
for the last two (2) days of the testing window may submit the refund request no later than fve (5)
business days from the last day of the testing window. Requests received after that time and/or without
documentation will not be reviewed.
What Is a Medical or Personal Emergency?
IEEE ComSoc considers a medical emergency to be an unplanned medical event that arises within
48 hours of the scheduled examination and prevents candidates from taking the examination. The
medical emergency may apply to candidates themselves or to one of the candidates immediate family
members (spouse, child, or parent). Medical events that can be anticipated as occurring on or near the
examination date or any of the dates on which candidates can schedule, reschedule, or withdraw from
the examination are not considered medical emergencies.
A personal emergency may apply to candidates themselves or to one of the candidates immediate
family members (spouse, child, or parent). Personal events that can be anticipated as occurring on
or near the examination date or any of the dates on which candidates can schedule, reschedule,
or withdraw from the examination are not considered personal emergencies. Inability to take the
examination due to workload or work conficts, or to an inability to properly prepare for the examination
is not considered a personal emergency.
No-Show Candidates
Candidates who do not appear for their scheduled examination appointment, who arrive more than 15
minutes late for their appointment, who appear without ID or without a valid ID, or who cancel their
appointment later than 12:00 noon (Regional Contact Center time) fve (5) business days before the
scheduled examination (without a documented medical or personal emergency) will be considered no-
shows and will forfeit all fees. No-show candidates may reapply for a future examination window and
pay the full fee.
Candidates Handbook
26
Studying
for the
Examination
Candidates Handbook
27
Studying for the Examination
Examination Preparation
Candidates should prepare thoroughly for the examination. The following are some of the available
resources to assist in this preparation.
Appendix C in this Handbook contains a short list of relevant references. This list is provided solely
as an example and these references should not be considered the only possible study options.
Appendix D in this Handbook contains a few sample questions that are similar in form and content
to those that appear on the certifcation examination.
Appendix E in this Handbook contains a glossary of acronyms, as well as constants, conversions, and
equations that candidates should be familiar with before taking the examination. This glossary will
also be available for online reference during the examination.
The Wireless Engineering Body of Knowledge (WEBOK), published by IEEE ComSoc, is a review text
that outlines the topics that may be covered on the examination. It includes numerous references
in which detailed wireless communications knowledge can be found. The WEBOK can be ordered
through the WCET website, www.ieee-wcet.org, or from John Wiley Publishers at www.wiley.com.
Online tutorials addressing many of the topical areas covered by the exam can be purchased from
IEEE ComSoc via the website www.ieee-wcet.org. Each tutorial offers a free fve-minute preview.
IEEE ComSoc has, through its education arm, developed a number of training materials in wireless
communications, including one-day and two-day refresher workshops, a three-day intensive study
course, and training materials that can be purchased for use by IEEE Sections and IEEE ComSoc
chapters, as well as by for-proft training organizations. Information about these materials can be
found at www.ieee-wcet.org.
Before applying for the WCET certifcation examination, candidates should strongly consider taking
an on-line practice examination. This exam consists of 75 questions that are similar to those on the
actual examination. The questions were created and reviewed by WCET subject matter experts at the
same time and using the same methodology as the questions on the certifcation examination. The
fee for the practice exam is US$50 and it may be taken up to two times by an applicant. For more
information, visit the WCET website, www.ieee-wcet.org.
A number of professional training organizations offer WCET-specifc training programs. A short list
can be found under Resources at the WCET website. There may be other such programs available
about which IEEE ComSoc has not been notifed. Note that IEEE ComSoc provides this listing strictly
as a courtesy and does not recommend or endorse any of these programs.
See pages 74-76 for more information.
Candidates Handbook
28
On
Examination
Day
Candidates Handbook
29
On Examination Day
Presenting Positive Proof of Identity
All candidates must present positive proof of identity by providing two forms of identifcation. One of
these must be an unexpired government-issued photo ID with a signature. Examples of government-
issued identifcations are a drivers license with a photograph, a military photo ID, or a passport. The
name on the ID must match the name used on the application and the Authorization to Schedule
notice and the photo must validate the candidates identity. Credit cards with photos and Social Security
or similar cards are not acceptable forms of government-issued identifcation. However, credit cards are
acceptable as the second form of identifcation.
All identifcation documents must be in Latin characters. Candidates testing outside of their country of
citizenship must present a passport. Candidates testing within their country of citizenship must present
either a passport, drivers license, national or other government issued ID, or military ID.
Candidates must have acceptable and unexpired photo identifcation to be admitted to a testing center.
If a candidates primary ID does not have a photo and signature, the secondary (backup) ID must
contain either a photo or signature, whichever is missing on the primary ID. The name on the backup
ID must exactly match the primary ID and the name in the scheduling system. Candidates who arrive at
the testing center without the required identifcation will not be permitted to test and will forfeit all fees.
Biometric Validation of Candidate Identifcation
To further validate candidate identifcation, Prometric employs a sophisticated biometric identity
management system throughout its domestic and international testing center network.
Prometrics biometric identity management system consists of a fngerprint reader, a device for reading
the data on a drivers license, passport, or similar identifcation document, and a scanner for scanning
in the drivers license or other identifcation document. The fngerprint reader captures an image of a
fngerprint and that image is used for comparison throughout the day.
Prometrics biometric technology allows for enhanced monitoring of a candidates movement into and
out of the testing room. By capturing the fngerprint scan at check-in, Prometric can allow candidates to
leave and return from breaks (based on IEEE ComSoc rules) by rescanning their fngerprint along with
their sign-in and a display of their identifcation documents. The software will compare the fngerprint
to the one scanned and saved at check-in, alerting the testing center administrator if the fngerprints do
not match.
Prometrics reader and scanner system authenticates a candidates drivers license (or other national
identifcation) when presented during check-in at the testing center. The software will read the bar
code or magnetic stripe on the license and provide two comparisons. First, it compares the license
presented to known license templates for the state, province, or country and will let the testing center
administrator know if the template does not match the license presented. The information from the
magnetic stripe or bar code will then be compared to the information on the face of the license. Again,
the testing center administrator will know if the information on the face of the license matches the
Candidates Handbook
30
information embedded in the barcode/magnetic stripe. This enables a testing center administrator to
verify that the license presented is valid and that the individual presenting the license is who he/she
claims to be.
Hyphenated Names
Candidates with hyphenated last names whose photo IDs show only one of the last names may be
admitted if the single name matches part of the hyphenated name and the signature and photograph
clearly match.
Candidates whose middle names are spelled out on their ID but are listed with an initial on the
application may be admitted as long as the initial matches the frst letter of the middle name and the
signature and photograph match. This also applies to candidates who use their middle name instead of
their frst name on their application but their ID displays their frst, middle, and last names.
Testing Center Rules
The following rules are enforced at all testing centers to ensure a fair and consistent test experience for
all candidates.
Arrive at the testing center at least 30 minutes before your scheduled reporting time.
All candidates must present an unexpired government-issued ID bearing their photo and
signature to be admitted to the testing center (see Presenting Positive Proof of Identity). Your
ID must match the name you provided on your application and the name that appears on your
Authorization to Schedule notice, and the photo must validate your identity.
All candidates will be required to have a fngerprint scan and will also have their drivers license
(or other national identifcation) read and scanned.
Admittance to the testing center is by appointment only. Candidates must be present at the time
and location of their appointment to be admitted.
No test materials, documents, or memoranda of any sort may be taken into or from the test
room.
Candidates will be provided with a couple of laminated sheets, a dry erasable marker, and an
eraser, to be used as an alternative to scratch paper during the exam.
Candidates will have the opportunity after the examination to submit general comments or
comments about specifc examination questions by following the applicable onscreen instructions.
The IEEE ComSoc Examination Committee will review all comments but will not provide written
responses to comments.
Smoking is prohibited.
Candidates may not ask questions about examination content.
All examinations are monitored and may be recorded in both audio and video format.
Candidates Handbook
31
No breaks are scheduled during the examination. Candidates who have to leave the testing room
to take a break will not be given extra time on the examination. To re-enter the testing room,
candidates must have their fngerprint rescanned, and must sign in and present their identifcation
documents.
Candidates may not leave the testing site facility while the examination is in progress.
IEEE ComSoc and PES reserve the right to cancel any test score believed to be obtained in a
questionable manner.
Food, drinks, purses, briefcases, notebooks, calculators, pagers, cellular telephones, recording
devices, and photography equipment are not allowed into the testing room.
It is expressly prohibited to disclose, publish, reproduce, or transmit any part of the examination,
in any form, by any means, verbal or written, for any purpose, without the express written
permission of IEEE ComSoc. Violation may result in civil or criminal prosecution.
Medications that may need to be accessed during the test can be stored in lockers outside the
testing room. Candidates who will need to use crutches or other medical equipment should
complete a special accommodation request form (see Appendix E) so that the testing center can
be informed in advance.
Religious headwear may be worn into the testing room; however, it may be subject to inspection
by a testing center administrator before entry into the testing room is permitted.
Candidates are expected to behave in a civil manner when on the premises of the testing center.
Exhibiting abusive behavior toward the testing center staff or other testing candidates may result
in forfeiture of your examination and/or criminal prosecution.
Please remember that other examinations are being administered at the same time that you are taking
the IEEE WCET examination so you may hear typing on keyboards for an essay examination, coughing,
and/or people entering and leaving the testing room. It is impossible to provide a completely noise-free
testing environment. The testing center allows candidates to bring small earplugs that can be inserted
inside the ear. Candidates are not allowed to bring in headsets or headphones. Earplugs are subject to
inspection by a testing center administrator before entry into the testing room is permitted.
Security Acknowledgement and Agreement
Prior to taking the examination, candidates will be presented with a security acknowledgement screen.
Candidates must acknowledge that they have read, understand, and accept the conditions listed below.
1. I have an ethical duty to protect the security of the IEEE WCET Certifcation Examination.
2. The examination and questions contained therein are the exclusive property of the IEEE
Communications Society WCET Certifcation Examination Program.
3. This examination and the questions contained therein are protected by copyright law and
constitute valuable trade secret information, the disclosure of which will cause injury to the IEEE
Communications Society WCET Certifcation Examination Program. No part of this examination
may be copied or reproduced in part or whole by any means whatsoever, including memorizing
and/or reporting question or examination content.
Candidates Handbook
32
4. The dissemination of question or examination content to any person, organization, company,
or other entity in any manner shall constitute a breach of professional ethics and theft of the
exam. Any person found guilty of such violation may have his/her score voided. The IEEE
Communications Society may prohibit the candidate from future access to the IEEE WCET
Certifcation Examination.
5. The theft or attempted theft of an examination or examination items is punishable as a
felony and may result in civil penalties and/or professional sanction. I recognize that the
breach of my obligations under this candidate acknowledgment may expose me to liability for
damages caused to the IEEE Communications Society and to legal fees incurred by the IEEE
Communications Society in preserving its rights.
6. I understand that during the examination, I may not communicate with other candidates, refer to
any materials other than those provided to me, or assist or obtain assistance from any person.
Failure to comply with these requirements may result in the invalidation of my examination
results as well as other appropriate action.
7. My participation in any irregularity occurring prior to, during, or subsequent to this examination,
such as giving or obtaining unauthorized information or aid, as evidenced by observation or
subsequent statistical analysis, may result in termination of my participation, invalidation of my
examination results, or other appropriate action.
Candidates who do not agree to the conditions listed above will not be allowed to proceed and take
the examination, and will forfeit both the application and examination fee.
Inclement Weather and Local or National Emergencies
In the event of inclement weather or a local or national emergency, please contact Prometric at the
Regional Contact Center (the number provided in your Authorization to Schedule notice) or go to www.
prometric.com/sitestatus to determine the appointment status. If the center is closed and appointments
are canceled, candidates should wait two (2) business days before calling to reschedule their
appointments.
Candidates Handbook
33
After the
Examination
Candidates Handbook
34
After the Examination
Receiving Examination Results
An offcial score report will be available online approximately three to four weeks after the close of the
testing window. To access your score report, go to www.ieee-wcet.org, click on the Post Exam then
Examination Results button, log in using your email address and the password you selected when you
submitted your application, click on the Communications tab, and follow the instructions to access your
score report. In addition to a score report, passing candidates will receive a certifcate. The certifcate
will be mailed to the postal address provided in the application, so make sure that you update your
address if it has changed. Under no circumstances will scores or pass/fail information be released over
the phone, via email or Internet, or by fax.
The score report provides information on whether the candidate passed or failed the examination. In
order to pass the examination, candidates must obtain a scale score of 500 or higher on a scale that
ranges from 200 to 800. In addition to the scale score, candidates will receive information on the total
number of questions in each area of expertise and the number of questions the candidate answered
correctly in each area. For passing candidates, the information will help identify specifc areas to focus
on for continuing education purposes. For failing candidates, this information will identify specifc areas
where improvement or further study may be required if retaking the examination is a consideration.
Due to the need to maintain test security, examination questions and answers will not be released to
candidates.
Retaking the Examination
Candidates who fail the examination may re-apply for the examination during the next available testing
window, but may not apply for the examination during the same testing window in which they failed.
Fees and application procedures for those retaking the examination remain the same as those for frst-
time applicants.
Candidates Handbook
35
Recertifcation
Passing the IEEE WCET examination means that an individual has demonstrated mastery of the
wireless communication body of knowledge. However, passing the examination is only one portion
of certifcation. The wireless communication feld is constantly changing and requires that wireless
communication professionals keep current with changes in the profession. Maintaining an active
certifcation status through recertifcation is the way in which certifed professionals demonstrate their
currency and preserve their professional edge.
Recertifcation is required every fve years, determined by the expiration date of your current certifcation
(shown on the passing candidate certifcate). Certifed Wireless Communication Professionals can
recertify by retesting and passing the examination.
Duplicate or Replacement Certifcates
Successful candidates who have not received a certifcate within three months after the close of the
testing window or who receive a damaged certifcate should email IEEE ComSoc at wcetcertifcates@
comsoc.org. A duplicate certifcate (if applicable) will be issued at no cost. A processing and shipping
fee may be assessed for requests postmarked more than 90 days after the test date.
If you legally change your name, lose your certifcate, or want another certifcate for personal reasons,
you may request a replacement certifcate. To request an additional certifcate, email wcetcertifcates@
comsoc.org.
Formal name changes require appropriate legal documentation, such as a notarized copy of a marriage
certifcate or divorce decree. Documentation should be sent to [email protected]. A
processing and shipping fee will be required for additional certifcates. Payment must be made by VISA,
MasterCard, or American Express.
Duplicate certifcate requests must include:
Candidates full name (as it appears on the application);
Postal address;
IEEE WCET ID number (found in the Authorization to Schedule notice);
Examination date; and
Appropriate legal documentation, if applicable. Please do not send originals, as they cannot be
returned.
Candidates Handbook
36
Review of Examination Score
To ensure the accuracy of results, PES performs quality assurance procedures before scoring
examination fles. It is extremely unlikely that a review of your electronic fle will result in a change in
your examination score.
Candidates may request that PES manually review their electronic examination fle within six months of
the examination date. Requests received after that time will not be honored. To submit a request, visit
https://www2.proexam.org/IEEE.
There is a US$50 fee to have PES review your electronic examination fle. Payment can be made by
VISA, MasterCard, or American Express.
Appendix A:
IEEE WCET Examination Specifcations
Appendix B:
International Testing Center Locations
Appendix C:
Sample References
Appendix D:
Sample Examination Questions
Appendix E:
Glossary
Appendix F:
Forms
Candidates Handbook
38
Appendix A:
IEEE WCET Examination Specifcations
Major Areas of Expertise
Area 1 (19-23%) - RF Engineering, Propagation, Antennas, and Signal Processing: Tasks and
knowledge related to: antennas, RF engineering, transmission, reception, propagation, channel
modeling, and signal processing.
Evaluate system performance and reliability; calculate path loss; evaluate the effects of different
fading and empirical path loss models; calculate and evaluate the effects on the received signal of
path-related impairments; determine parameters related to antennas or antenna arrays; generate and
evaluate coverage and interference prediction maps; develop and analyze procedure to optimize the
coverage of a radio; make RF system measurements.
Area 2 (19-23%) - Wireless Access Technologies: Tasks and knowledge related to wireless access
networks, especially the physical, MAC, and link layers.
Analyze building blocks, multiple access, mobility management, and spectrum implications in wireless
access system design; analyze design considerations to optimize capacity/coverage; design and
analyze a wireless access system; analyze the required bandwidth for a wireless system and tradeoffs;
analyze wireless access technology standards, their features, and evolution.
Area 3 (19-23%) - Network and Service Architecture: Tasks and knowledge related to network
infrastructure, including core networks; service frameworks such as IMS; and application architectures
such as voice, video streaming, and messaging. All-IP services architecture as in 3GPP Rel 6 and
beyond, including Enhanced Packet Services (EPS) as in 3GPP Rel 8 LTE (Long Term Evolution) and
EPC (Enhanced Packet Core).
Analyze service platforms, IP addressing schemes for various technologies; design and test quality of
service (QoS); select and test a load-balancing scheme; analyze IP routing and ad hoc routing and
mesh protocols; perform capacity planning, error tracking, and trace analysis; analyze the evolution of
mobile networks to enable IP multimedia.
Area 4 (11-15%) - Network Management and Security: Tasks and knowledge related to fault,
confguration, account, performance, maintenance, security management, management availability,
and operation support systems (examples include network service assurance and provisioning).
Design a fault monitoring system and a performance monitoring system; develop/specify types and
methods of alarm reporting; compute availability and reliability metrics; assess the potential impacts of
known security attacks; plan corresponding solutions to known security attacks.
Area 5 (6-8%) - Facilities Infrastructure: Tasks and knowledge related to the specifcation, design,
implementation, and operation of facilities and sites.
Determine power consumption; analyze electrical protection requirements and design the electrical
protection layout for a wireless telecommunications facility; determine the required antennas for the
facility and their positions; develop a specifcation for the required structure for a wireless base station
facility; determine the required cable, antennas, and materials to implement an in-building wireless
network; evaluate equipment compliance with industry standards, codes, and site requirements.
Candidates Handbook
39
Area 6 (6-8%) - Agreements, Standards, Policies, and Regulations: Tasks and knowledge related
to externally imposed compliance requirements and conformance testing, including interoperability.
Assess service and equipment quality; prepare specifcations for purchasing services and equipment
and evaluate the responses; verify compliance with regulatory requirements; select and analyze
frequency assignments; perform standardized homologation tests as required by regulatory or
standardization bodies; evaluate compliance with health, safety, and environmental requirements;
perform conformance/interoperability analyses of systems and components; analyze the use of
licensed vs. unlicensed spectrum; obtain licenses and permits.
Area 7 (8-12%) - Fundamental Knowledge: Basic knowledge that a wireless communications
engineer would use in order to perform tasks across all domains.
Apply basic concepts related to electrical engineering, communications systems, and general
engineering management.
Area 1 RF Engineering, Propagation, Antennas, And Signal Processing
Tasks:
T1.01 Calculate link budgets to evaluate system performance and reliability based on received signal level
and fade margin (examples might include satellite, microwave link, base station to mobile station,
wireless LAN and PAN); calculate path loss for various RF transmission systems (examples might
include between isotropic or dipole reference antennas, base station to mobile station, base station
to repeater, earth station to satellite, LOS/NLOS paths, and clutter losses).
T1.02 Calculate the capacity of various multiple-antenna schemes, and analyze the tradeoffs involved
in selecting from among alternative schemes (calculations might include analysis of pre-coding
techniques).
T1.03 Evaluate the effects of different fading models (examples might include Rayleigh and lognormal)
and empirical path loss models on the received signal strength in various signal propagation
environments (examples might include fat terrain, rolling hills, urbanized areas, and indoor
environments [such as buildings or tunnels] with losses caused by walls, ceilings, and other
obstructions).
T1.04 Calculate and evaluate the effects on the received signal of path-related impairments, such as
Fresnel Zone blockage, delay spread, and Doppler shift of a signal received by a moving receiver.
T1.05 Calculate the polarization mismatch loss for various antenna systems (examples might include fxed
microwave systems, cellular and mobile radio systems, and satellite systems).
T1.06 Evaluate receive diversity gain for selection, equal gain, and maximal ratio diversity system
confgurations.
T1.07 Determine parameters related to antennas or antenna arrays (examples might include pattern,
beamwidth, gain, SAR-reduction features, distance from an antenna or array at which far feld
conditions apply, spacing, beam forming, tilt, and sectorization) and analyze the effects of these
parameters on coverage.
Candidates Handbook
40
T1.08 Determine appropriate antenna location at base station sites to prevent inter-system and intra-
system interference effects, taking into account required radiation patterns and mutual coupling
effects.
T1.09 Generate and evaluate coverage and interference prediction maps (examples might include maps
for cellular, mobile radio, and WLAN systems).
T1.10 Develop and analyze a procedure to optimize the coverage of a radio system using propagation
modeling and drive test measurements.
T1.11 Develop a block diagram of an RF system (examples might include cellular, land mobile, and
WLAN) employing standard modules (examples might include flters, couplers, circulators, and
mixers) and/or using lumped or distributed matching networks, microstrips, and stripline.
T1.12 Make and analyze RF system measurements (examples might include swept return loss to
determine antenna system performance, transmitter output power [peak or average, as appropriate],
signal-to-noise ratio at a receiver front end, and co-channel and adjacent-channel interference for
specifc types of signal spectra).
Knowledge of:
K1.01 different types of losses (examples might include transmission line loss, antenna gain, connector
losses, and path loss)
K1.02 procedures to calculate antenna gain and free space path loss
K1.03 statistical fading models and distance-power (path loss) relationships in different propagation
environments
K1.04 the effects of outdoor terrain and indoor structures such as walls, foors, and ceilings on signal
propagation
K1.05 common deterministic, statistical, and empirical propagation models (examples might include free
space, Okumura, Longley-Rice, and ray-tracing) and software modeling tools (examples might
include EDX Signal, ATDI, PathLoss, and similar radio network planning tools) used to implement
them
K1.06 topographical maps and digital terrain databases
K1.07 indoor and outdoor coverage calculation and verifcation techniques
K1.08 Es/N0, Eb/N0, RSSI, NF, and other system parameters
K1.09 the relationship between receiver noise fgure, noise temperature, and receiver sensitivity and the
relationship between sensitivity under static conditions and the degradation of effective receiver
sensitivity caused by signal fading in different propagation conditions
K1.10 external noise sources and their impact on the S/N ratios of received signals, and techniques for
measuring the impact of external noise
K1.11 basic antenna system design and use including antenna types (examples might include
omnidirectional, panel, parabolic, dipole array, indoor antennas), antenna patterns, gain and EIRP,
EIS, ERP, TIS, TRP, antenna size, antenna polarization, receive and transmit diversity, antenna
correlation coeffcients (examples might include MIMO antenna systems), and proper antenna
installation to provide for coverage, interference mitigation, and frequency reuse
Candidates Handbook
41
K1.12 adaptive antenna methods and techniques, including null-steering, selection diversity, optimal-ratio
combining, adaptive antennas, spatial multiplexing, space-time coding, and MIMO techniques
K1.13 subscriber unit, mobile, and device antennas and their performance characteristics, including SAR-
reduction characteristics
K1.14 use of test equipment such as network analyzers, spectrum analyzers, and TDRs
K1.15 co-channel and adjacent channel interference analysis and measurement methods and techniques;
multi-user detection and interference-cancellation schemes and their limitations
K1.16 flters, power dividers, combiners, and directional couplers
K1.17 signal processing techniques, including matched fltering, adaptive fltering, adaptive equalization,
and Rake processing
Area 2 Wireless Access Technologies
Tasks:
T2.01 Analyze multiple access schemes for various technologies.
T2.02 Analyze spectrum implications in wireless access system design (examples might include
applications, TDD/FDD, inter-modulation, LOS/NLOS, coverage/capacity).
T2.03 Analyze design considerations and perform system design to eliminate coverage holes and to
optimize capacity/coverage in urban/indoor areas.
T2.04 Design and analyze a wireless access system (examples might include AP placement and channel
selection) according to given bandwidth requirements, coverage, and other considerations.
T2.05 Test devices with respect to interference issues in various operating environments (examples might
include TDMA, CDMA, WCDMA, WLAN, 802.15).
T2.06 Perform interference analysis (examples: co-site interference in TDMA, CDMA, WCDMA, WLAN,
802.15, and GSM; effect of interference on capacity in cellular, WLAN, WAN, ad hoc and sensor
networks).
T2.07 Compute the required bandwidth for a wireless system given certain network conditions (examples
might include BER, fow count, and protocols in use).
T2.08 Analyze the tradeoffs (examples might include bandwidth versus BER) of various error detection
and correction techniques.
T2.09 Analyze the tradeoffs and capacity implications of mitigation techniques for time-varying channels,
including channel estimation; time- and frequency-recovery and tracking; modulation/demodulation;
pre-coding; and power control schemes (examples: scheduling algorithms, bandwidth versus power
effciency analysis).
T2.10 Calculate frequency re-use factor.
T2.11 Design fundamental elements/attributes of wireless network systems (examples might include
cellular, 802.16, WLAN, and satellite).
Candidates Handbook
42
T2.12 Analyze the steps involved in the process of handover/handoff for various wireless systems
(examples might include UMTS, CDMA2000, 802.16, and WLAN).
T2.13 Analyze the tradeoff between the size of a paging area and the location update frequency.
Knowledge of:
K2.01 multiple access and multiplexing schemes (examples might include TDMA, CDMA, OFDMA, FDMA,
and SDMA)
K2.02 technology standards and their evolution (examples might include WCDMA, CDMA2000, LTE,
802.11, 802.15, and 802.16)
K2.03 error detection and correction, ARQ, HARQ, Turbo Coding, link-adaptation, modulation/
demodulation, and pre-coding techniques
K2.04 objectives of channel-estimation and power-control schemes and their operation
K2.05 handover/handoff/mobility management, including inter-technology handover/handoff
K2.06 paging functions
K2.07 the major components of a wireless network topology
K2.08 LEOS, MEOS and geostationary satellites, their bands, and their usage for broadcasting
Area 3 Network and Service Architecture
Tasks:
T3.01 Analyze service platforms including service enablers (examples might include messaging,
positioning, and location), service creation/delivery (examples might include Open Service Access
and Parlay), and service-oriented architecture (SOA). Design and engineer various VAS (CRBT, SMS,
VMS, Alerts, etc.) services on wireless network CORE. Design optimum network services for data
traffc.
T3.02 Analyze IP addressing schemes for various technologies (examples might include Mobile IP, RObust
Header Compression [ROHC] as in VoIP over HSPA or LTE, IPv4, and IPv6).
T3.03 Design and test quality of service (QoS) (examples might include design and plan for adequate
resources, selecting priority schemes, prioritization of differentiated services, queuing strategies,
mapping of QoS classes between network and transport layers and call admission control) for
VoIP and IMS-based services. Calculate Capacity and Grade of Service (GOS) for a cellular network
e.g., GSM/WCDMA/LTE networks. Provision QoS for different applications per 3GPP standards, e.g.
through QCI, ARP, etc. for LTE/EPC networks.
T3.04 Select and test a load-balancing scheme.
T3.05 Analyze IP routing (examples might include interpreting an IP routing table).
Candidates Handbook
43
T3.06 Analyze ad hoc routing and mesh protocols, and suitability for various deployment scenarios.
T3.07 Perform capacity planning using traffc engineering principles.
T3.08 Perform error tracking and trace analysis on protocol control messages for specifc systems.
T3.09 Analyze the evolution of mobile networks to enable IP multimedia services (including circuit-
switched to packet-switched network evolution).
T3.10 Analyze intra- and inter-domain roaming (examples might include roaming within a country or in
different countries in 3GPP networks). Analyze service continuity across domains (e.g., VoIP in LTE
and circuit-switched voice in GSM/W-CDMA networks).
T3.11 Analyze the functioning of TCP/IP major transport protocols (examples might include TCP, UDP, and
RTP) in the context of wireless communications and limitations of PING/Ack.
T3.12 Develop a simple block diagram-level design for a network operations center (examples might
include digital cellular, web-based mobile content, multimedia broadcast, and SMS).
Knowledge of:
K3.01 IMS (IP multimedia subsystems) and its architecture, including session control and switching plane;
knowledge of different VAS in wireless domain
K3.02 VoIP/IP-multimedia protocols
K3.03 wireless service enablers evolution, including call processing architecture/framework, feature
development/enhancement, as well as applications such as presence, location, etc. policy rules,
decisions, charging and enforcement
K3.04 location and positioning techniques
K3.05 load balancing principles in the context of wireless communications, and methods to avoid single
point of failure through active/active or active standby, and concept of self organizing networks
(SON)
K3.06 IP routing and mobile IP networking and addressing schemes including WLAN systems. IP evolution
in wireless access - backhaul and packet core connectivity
K3.07 error tracking and trace analysis techniques for dropped cells, access failures and other network
related problem reports
K3.08 circuit switched and packet switched data and packet cellular networks and the differences between
them; knowledge of various data capable technologies - 1xRTT, EVDO, GPRS/EDGE, LTE
K3.09 roaming and roaming controls
K3.10 TCP/IP including transport protocols including WLAN systems
K3.11 Access Point Name and its functionality
K3.12 heterogeneous architecture for single-hop and multi-hop wireless networks
Candidates Handbook
44
Area 4 Network Management and Security
Tasks:
T4.01 Design a fault monitoring system (examples might include using SNMP TRAP/NOTIFICATION, and
using 2G OAM&P standards at Network Element Layer [NEL], Equipment Management Layer [EML],
and Network Management Layer [NML]).
T4.02 Design a performance monitoring system (examples might include using SNMP GET/SET and
performance measurement on radio layer, BTS and RNC, usage and traffc analysis and accounting,
monitoring SAACH frame error rate in 3GPP networks).
T4.03 Develop/specify types and methods of alarm reporting for an installation, and other OAM&P.
T4.04 Compute availability and reliability metrics from both the network performance and system
designer perspectives (related to equipment failure).
T4.05 Assess the potential impacts of known security attacks on wireless systems (examples might include
virus, worm, DoS, network sniffng, fooding and impersonation; additional examples might include
SIM/USIM card cloning, attempting bank transaction using prepaid cellular handsets, integrity of
SMS, multi subscription of USIM card etc).
T4.06 Plan corresponding solutions to known security attacks (examples might include stolen SIM card,
stolen PIN, use of different handsets using the same SIM card etc).
T4.07 Monitor, log, and audit security-related data (including tasks such as streaming system logs to third
party box for analysis and reporting).
T4.08 Analyze security vulnerabilities and prepare/recommend corrective actions; develop comprehensive
test plan for network security testing.
T4.09 Design and plan a migration to a new network management scheme (including impacts on OSS,
BSS, and billing); design proper access levels (user management) and its implementation.
T4.10 Analyze wireless accounting and billing schemes including inter-operator accounting.
T4.11 Design and establish VPN communications from client to host.
Knowledge of:
K4.01 quality of service (QoS) monitoring and control
K4.02 fault management
K4.03 confguration management including licensing mechanisms, feature addition/integration, system
initialization and installation, policy-based management, role-base access control, level of security
offered OTA by standard cellular and wireless systems, and architectures for service management
K4.04 authentication, authorization, and accounting (AAA) principles and mechanisms and APN security;
CAVE, A3/A8 and other authentication algorithms - separating mobile from subscription data;
cellular authentication schemes based on HLR, VLR, SIM card
K4.05 types of security attacks on wireless networks (examples might include use of stolen SIM card,
fraudulent techniques to use handsets in non-designated areas)
Candidates Handbook
45
K4.06 protocols to secure wireless networks (examples might include Application Security, Web security
and Secure Socket Layer, VPN, RADIUS, DIAMETER, HLR/VLR and encryption methods based on
cellular algorithms), and Self Organizing/Optimizing networks for next generation networks
K4.07 security-violation events logging and monitoring, attempts towards billing fraud, SIM card
manipulation and detection, etc. and different security testing tools
K4.08 security issue management and resolution (examples might include management of A-key, OTAP
and HLR/VLR updates, monitoring handoff and reauthentication during call)
K4.09 network management protocols (examples might include simple network management
protocol [SNMP], network scanning for BTS identifcation, interface measurements, data quality
measurements, video quality measurements, verifcation of test mobile phones, acquisition of
calibration data for planning tools)
K4.10 performance metrics pertinent to various access networks (examples might include Carrier to
Interface (C/I) matrix; recommended changes to neighbor list to ensure appropriate cell handovers
and others)
K4.11 IP security, Encapsulation Security Payload (ESP), Internet Key Exchange, and digital signature; root
authentication keys in removable UIM, Data Subscriber Authentication - DSA over the air interface
K4.12 MIB, RMON, and Internet Control Messaging Protocol (ICMP)
K4.13 intrusion detection systems, DDoS attacks, and traceback techniques; GSM security IMSI/TMSI,
RAND, SRES-HLR and AuC checking methods, network controlled policies, on-line and off-line
charging for pre-paid subscribers
K4.14 operational process models (examples might include ITIL and eTOM); writing A-key into mobile
manual and over-the-air procedures
K4.15 hot billing during call, hot billing after call, and similar cases
K4.16 OTAP (Over the air provisioning methods), USIM (Universal SIM) card architecture, Kasumi security
algorithm
K4.17 mobile money transaction methods, near-feld communications and security
Area 5 Facilities Infrastructure
Tasks:
T5.01 Determine the power consumption of a unit of communications equipment (examples might
include tower amplifer modules, pressurization systems for waveguides).
T5.02 Determine the power consumption for a facility containing communications equipment (examples
might include base station amplifer racks, microwave system rack etc.).
T5.03 Design a DC power plant to support the facility for a given required reserve time.
T5.04 Analyze the electrical protection requirements (includes grounding/earthing, bonding, shielding, and
lightning protection) and design the electrical protection layout for a wireless telecommunications
facility.
Candidates Handbook
46
T5.05 Design a wireless communication facility layout plan with considerations for heating, air conditioning,
ventilation, and structural issues.
T5.06 Determine the required antennas for the facility, including specifcation of the antenna system from
RAN to Antenna. Identify and size common types of antenna, amplifers, and cable for a given
scenario.
T5.07 Determine the required antenna positions on a structure (examples might include towers located in
remote/extreme conditions such as mountain tops, arctic areas, etc.).
T5.08 Design the waveguide/transmission line layout between the communications electronics and the
antenna(s).
T5.09 Coordinate with other users when implementing a communications system in a shared location.
T5.10 Develop a specifcation for the required structure for a wireless base station facility based on the
required antenna sizes and elevations above ground.
T5.11 Determine the required cable, antennas, distributed antenna systems, and materials to implement
an in-building wireless network.
T5.12 Determine the required number of racks on which to mount the equipment and the rack layout and
placement, taking into account the maintainability of the equipment.
T5.13 Evaluate equipment compliance with industry standards, codes, and site requirements such
as NEBS/ETSI specifcations as well as ANSI, IEC, local/city regulations, right of way, and other
applicable standards.
T5.14 Design a site-specifc alarm and surveillance system.
Knowledge of:
K5.01 procedures to determine the power consumption of wireless communications equipment
(examples might include satellite earth station facility, ship/small island based facility, etc.)
K5.02 how to determine the power required to support a site (examples might include solar and wind
based support for tower sites, considerations of bird nests, heated radome, etc.)
K5.03 the application of AC and DC power systems (examples might include urban towers based on roof
tops, tunnels and bridges)
K5.04 the application of alternative energy sources to wireless communications facilities (examples might
include use of solar, wind power, or bio-mass in rural areas)
K5.05 heating, ventilation, and air conditioning (HVAC) requirements
K5.06 equipment racks, rack mounting spaces, and related hardware
K5.07 electrical protection (including grounding/earthing, bonding, shielding, and lightning protection)
K5.08 basic waveguides and transmission lines (examples might include elliptical waveguides, multiple
cables runs, pressurization and sealing of connectors, etc.)
K5.09 tower specifcations and standards (examples might include wind load calculation based on
Effective Plate Area, alignment kits, and elevation angle measurements)
K5.10 physical security requirements
Candidates Handbook
47
K5.11 alarm and surveillance systems
K5.12 effects of environmental exposure (examples might include corrosion, temperature, and UV
susceptibility)
K5.13 NEBS/ETSI specifcations as well as ANSI, IEC, and other applicable standards, codes, and other
relevant site-specifc requirements
K5.14 where to fnd expertise in structural engineering, fre suppression, and other building systems
Area 6 Agreements, Standards, Policies, and Regulations
Tasks:
T6.01 Assess service and equipment quality and recommendations to standardization bodies for new
requirements/features.
T6.02 Prepare specifcations for purchasing services and equipment, and evaluate the responses, including
relevant country-specifc standards (examples might include preparing request for proposals for
introducing new services/licenses and evaluating submitted proposals for implementation of
universal services projects).
T6.03 Verify compliance with regulatory requirements (examples might include licensing, standards, rules,
and regulations).
T6.04 Select and analyze frequency assignments.
T6.05 Perform standardized homologation tests as required by regulatory or standardization bodies.
T6.06 Evaluate compliance with health, safety, and environmental requirements.
T6.07 Perform conformance/interoperability analyses of systems and components, including self
organizing and self optimizing networks for NGN.
T6.08 Analyze the use of licensed vs. unlicensed spectrum.
T6.09 Obtain and draft licenses and permits where required, including software, hardware, product
licenses (open source, GNU, IP, patent laws), as well as dispute settlement.
T6.10 Perform market analysis, study of market indicators, and pricing of telecom services.
Knowledge of:
K6.01 regulatory requirements and telecom laws (examples might include international, national, and
local); emerging standards and network evolution (examples might include convergence of
networks, IMT-advanced); regulatory pillars (examples might include transparency, free competition)
and mandates (examples might include consumer protection, universal service); international
organizations and corresponding structure and functions (examples might include the role of ITU
and its subdivisions)
K6.02 spectrum licensing (examples might include leasing options, primary and secondary assignments in
license)
Candidates Handbook
48
K6.03 spectrum characteristics, availability, and management including formal methods of measurements
to report non-compliance to regulatory bodies
K6.04 local and site-specifc rules/codes (examples might include the National Electric Code in the US and
analogous codes in other countries) and engineering regulations (examples might include when
engineering work needs to be sealed by a Professional Engineer)
K6.05 electrical and RF safety (examples might include UL, EC, CSA, and IEEE C.95)
K6.06 frequency assignment databases and online tools (examples might include verifcation of registered
users in the area, experimental bands and their usages)
K6.07 modulation anomalies (examples might include cross modulation, modulation products, harmonics,
and quantization impact)
K6.08 health, safety, and environmental issues (examples for RF safety might include SAR limits for
different countries [e.g., American limits vs. European limits for accepted SAR-values] and their
different ways to measure it)
K6.09 equipment type approval processes/requirements
K6.10 how to identify and locate appropriate industry technical standards, applicable codes, and other
pertinent requirements
K6.11 cost calculation models
Area 7 Fundamental Knowledge
Knowledge related to electrical engineering
K7.1 fundamental AC/DC circuit analysis
K7.2 mathematics including linear algebra, probability, statistics, and Boolean arithmetic
K7.3 operation of complex test instruments, including oscilloscopes, spectrum analyzers, network
analyzers, TDRs, and signal generators
K7.4 frequency spectrum and Fourier transforms
K7.5 basic printed circuit board design considerations
K7.6 transmission theory and lines, antennas, and basic electromagnetic wave theory and applications
K7.7 power calculations (examples might include dB, dBm, and dBx)
K7.8 basic concepts of queuing theory and traffc analysis
K7.9 basic signal processing (examples: analog and digital processing; quantization; linear fltering theory,
concepts, and design)
K7.10 basic concepts related to optical communications
K7.11 basic electronic system-level block diagrams
K7.12 basic power supply design
Candidates Handbook
49
Knowledge related to communication systems
K7.13 basic communications and information theory (analog and digital)
K7.14 basic telephony (including signaling, switching, and transmission)
K7.15 noise impairments
K7.16 basic EMI, EMC, and interference
K7.17 frequency allocations and reuse
K7.18 modulation techniques for analog (examples might include AM, FM, and PM)
K7.19 modulation techniques for digital (examples might include FSK, PSK, and QAM)
K7.20 wireless multiple-access schemes (examples might include FDMA, TDMA, CDMA, and variants)
K7.21 basic satellite communications
K7.22 digital data transmission formats (examples might include E1/T1 and OC-n/SDH)
K7.23 basic components of RF circuitry
K7.24 basic RF circuit design, including flter design
K7.25 basic RF coupling, radiation, and antenna theory concepts
K7.26 measurements for RF circuits and sub systems, such as output power, receiver sensitivity, noise
fgure, linearity performance, and spectral performance
Knowledge of general engineering management:
K7.27 project management methods and processes
K7.28 fundamental engineering economics
K7.29 design and confguration for ease of maintenance
K7.30 documentation and confguration control schemes
K7.31 IEEE Code of Ethics
Candidates Handbook
50
Appendix B:
International Testing Center Locations
The following table lists the Prometric testing center locations outside the US and Canada. Candidates who are
testing in the US or Canada should visit www.Prometric.com/Candidates or call +1 800 532 2169 to fnd the
center closest to them.
Efforts were made to see that the following list was accurate at the time this handbook was published.
However, local conditions may result in Prometric opening, closing, or relocating testing centers, and applicants
are urged to check the current list via the website www.ieee-wcet.org.
Country City Testing Location Address
Argentina Buenos Aires
Instituto Cultural Argentino
Norteamericano
1006
Armenia Yerevan Marshal Baghramian 17 2nd Floor 375019
Australia Melbourne Logonline Training
Unit 3, Level 8, 20-22
Albert Road
3000
Australia Sydney
Thomson Prometric, Level 4,
100 Harris Street
Pyrmont 2009 NSW
Austria Vienna
Bit Schulungscenter Nfg GmbH
& Co
KG Lemboeckgasse 49A 1230
Bangladesh Dhaka American Alumni Association
House 145, Street 13B,
Banani
1213
Bolivia La Paz
Centro Boliviano Americano La
Paz (CBA)
Parque Zenon Iturralde
#121
Botswana Gaborone Plot 39772/1 Garamotlhosi Road Junction
Brazil Belo Horizonte CEP
Instituto Cultural Brasil
Estados Unidos
30160-011
Brazil Brasilia Casa Thomas Jefferson
Quadra 606, Conjunto B
Asa Norte
70840-060
Brazil Curitiba Inter Americano/EBC
Rua Maranhao 2088,
Portao
80610
Brazil Porto Alegre Rua Riachuelo 1257
Instituto Cultural Brasileiro
Norte-Americano
90010-271
Brazil Recife Avenida Rosa e Silva 1510 Associacao Brasil America 52020-220
Brazil Rio de Janeiro
Instituto Brasil Estados Unidos
(IBEU)
Av. N.S. de Copacabana.
690/903
22050-001
Brazil Sao Paulo
Associacao Alumni Prometric
Testing Center
Rua Brasiliense, 65 04729-110
Bulgaria Sofa Fulbright Commission
17 Alexander Stamboliiski
Boulevard, Sofa
1000
Candidates Handbook
51
Chile Santiago
Instituto Chileno
Norteamericano de Cultura
Moneda #1467
China Beijing
STC, Room 519, B Tower,
Dingjun Building
N0. 75 Suzhoujie 100080
China Changsha
Room 1001B, Yonghua
Building
No.48 CaiE Rd 410005
China Chengdu
Wenhua Road, Sichuan
University
No. 24 1st South Section,
Yihuan Road
610064
China Dalian Liaoning Normal University Xin Wen Ke Bldg, 1st Floor 116029
China Guangzhou
Guangzhou University of
Foreign Study
Baiyun Dadao North #2 510420
China Harbin
Room 302, Zhili Building, No.
16 Wenku Street
Nangang District 150040
China Jinan
Campus of Shandong
University No. 73
11th Floor, Main Building
South
250061
China Kunming
Room 3-14, 3rd Fl., Yunnan
Education Committee Bldg.
No. 2 Xuefu Road 650233
China Nanjing
Foreign Testing Center, Nanjing
University
No. 22 Hankou Road 210093
China Shanghai
Shanghai University of Finance
& Economics
3rd Floor, Canteen Building 200083
China Wuhan The Educational Test Center
No. 5, Changqing Road,
Hankou District
430023
China Xiamen
Room 101, Jijin Building,
Xiamen University.
No. 422, Siming Nan Road 361005
China Xian
Xian Foreign Language
University
Room 110, ILTC Teaching
Building
710061
Columbia Cali
Universidad de San
Buenaventura
Edifcio El Lago Ofcina
208
Columbia Chia Gimnasio Britanico Sede Campestre Chia
Croatia Zagreb
University of Zagreb, Faculty of
Economics
J.F. Kennedy Square 6 10000
Czech
Republic
Prague U.S. Business School Praha Truhlarska 13-15 11000
Dominican
Republic
Santo Domingo
Instituto Cultural Dominico-
Americano (ICDA)
Avenida Abraham Lincoln
#21
Egypt Cairo AMIDEAST 23 Mosaddak Street, Dokki
Finland Helsinki Fulbright Center
Kaisaniemenkatu 3B (5th
Floor)
00100
France
Paris
(Courbevoie)
MBA Globe Training 19 Rue Armand Silvestre 92400
France Puteaux Prometric Test Centre
Tour Arago, 5 Rue Bellini,
16th Floor
91800
Candidates Handbook
52
France Toulouse
Universite Paul Sabatier,
Building U4
118 Route de Narbonne,
Room 101
31062
Georgia Tbilisi American Councils - Prometric
27/29 Chavchavadze
Avenue, Apt 19
0179
Germany Berlin Prometric Testing Centre
Tor Strasse 49,
Schoenhauser Tor
10119
Germany Frankfurt Prometric Testing Centre Zeil 5, 3rd Floor 60313
Germany
Frankfurt
(Eschborn)
New Horizons CLC Frankfurt
Ludwig Erhard Strasse
30-34
65760
Germany Hamburg
Skill Networks GMBH
Hamburg
Uwestrasse 12 22525
Germany Munich Prometric Testing Centre Nymphenburgerstrasse 20A 80335
Ghana Accra Linear Assessment Services 1st Floor Total House
Greece Athens Fulbright Prometric Test Center
4th Floor, 30 Averoff &
Acharnon Street.
10433
Greece Thessaloniki
US Educational Foundation in
Greece
Venizelou 4, 3rd Floor 54624
Guam Hagatna 134 Soledad Ave. Suite 407 Bank Of Hawaii 96910
Guatemala Guatemala City
Instituto Guatemalteco
Americano (IGA)
Ruta 1, 4-05 Zona 4 01004
Hong Kong Kowloon
Room 501 HKEA San PO Kong
Sub-Offce
#17 Tsuek Luk Street, San
PO Kong
Hungary Budapest Fulbright Commission
Baross Street 62, Ground
Floor 15
1082
India Ahmedabad Prometric Testing PVT Ltd
301-302 Abhijeet II, Mitha
Khali Six Roads
380006
India Allahabad I P E M
119/25A,Mahatma Gandhi
Marg Civil Lines
211001
India Bangalore Prometric Testing PVT Ltd
Maini Sadan,38 Lavelle
Road, 7th Cross
560001
India Chennai Prometric Testing PVT Ltd
15,Jagannathan Road,
Nungambakkam
600034
India Gurgaon Prometric Testing PVT Ltd
Mercury Sol Ltd Sec-14,
SCO21&22 Lower Ground
122001
India Gurgaon Prometric Testing PVT Ltd
2nd Floor, DLF Infnity
Tower-A
122002
India Hyderabad Prometric Testing PVT Ltd
Above SBI, Road 12 Banjara
Hill,Avenue 1,St 20
500034
India Kolkata Prometric Testing PVT Ltd
Flat 1/C Sukh Sagar Bldg,
2/5 Sarat Bose Road
70020
Candidates Handbook
53
India Mumbai Prometric Testing PVT Ltd
Marwah House, Saki Vihar
Road, Saki Naka
400072
India Trivandrum Prometric Testing PVT Ltd PTC Towers, SS Coil Road 695001
Indonesia Jakarta
The Indonesia International
Education Foundatrion
Menara Imperium 28th
Floor Suite B
12980
Ireland Dublin Hospitality House
16/20 South Cumberland
St
2
Israel Ramallah District
AMIDEAST, 1st Floor Al-
Watanieh Towers
34 El-Bireh Municipality St,
El-Bireh
91193
Israel Tel Aviv
Prometric, Ground Floor,
Hasapanut House
3 Nirim Street, Opp Yad
Elihayu Stadium
67060
Italy Milan Prometric/Politecnico Milano
Campus Bovisa Sud, Via la
Masa 34
20158
Italy Milan Via Angelo Villa6 Sesto San Giovanni 20099
Italy Rome Atrak S.r.l. Via Paolo Di Dono, 73 00142
Japan Kanagawa Soutetsu KS Building. 9F 1-11-5 KitasaiwaiI Nishi-ku 222-0004
Japan Osaka Nakatsu Center Bldg. 7F 1-11-1 Nakatsu Kita-ku 531-0071
Japan Tokyo Kayabacho Tower 15F 1-21-2 Shinkawa, Chuo-ku 104-0033
Japan Tokyo Nissei Minamiazabu Bldg. 3F
2-8-12 Minamiazabu,
Minato-ku
106-0047
Jordan Amman
AMIDEAST, 3rd Floor, Rodeo
Plaza Building
Nuh Al-Rumi St. Sweifyeh
District
11118
Kazakhstan Almaty
ACTR/ACCELS Almaty, Room
417
Prospekt Seifullina 531 480091
Kenya Nairobi Frise Holdings 2nd Floor Alys Centre
Korea Seoul KAEC, Fulbright Building
Mapo-gu, Yomni-dong,
168-15
121-874
Kuwait Kuwait
Block 3, Corner of 4th St. &
Yousef
Al-Qenai Street, Building
15, Salmiya
Latvia Riga
Baltijas Datoru Akademija
(BDA)
Elizabetes 65 LV 1050
Lebanon Beirut
Amideast, Beirut Central
District
Bazerkan Building. 1st Floor,
Nijmeh Sq.
2011 3302
Lithuania Vilnius
Vilnius Educational Information
Center
Sauletekio aleja 9 (VU
Skaiciavimo Center), R107
LT10222
Luxembourg Luxembourg Key Job SA 6 Rue de la Fonderie L-1531
Malaysia Kuala Lumpur Prometric Testing Center
Suite 21A-15-1, Faber
Imperial Court
50250
Mauritius Quatre Bornes DCDM Business School 4th Floor, Orbis Court
Candidates Handbook
54
Mexico Guadalajara Executrain of Guadalajara
Ave. Lopez Mateos Sur
1480-501
45040
Mexico Mexico City
Institute of International
Education
Berlin 18 Colonia Juarez 06600
Mexico Monterrey
IMNARC - Instituto Mexicano
Norteamericano
de Relaciones Culturales de
Nuevo Leon
64000
Nepal Kathmandu
Fulbright Commission in Nepal
(USEF/N)
GPO Box 380
Netherlands Amsterdam Crowne Plaza City Hotel Nieuwezijds Voorburgwal 5 1012 RC
Netherlands Amsterdam Global Knowledge Network
Q-Port Building, 5e Floor,
Kingsfordweg 43
1043 GP
Netherlands Arnhem
Cito Group Oude Oeverstraat
120
4th Floor, Arnhem Bldg. 6811 JZ
Nigeria Lagos
Firstlogic, Ground Floor, Wema
Building
Plot 30 Oba Akran Ave,
Ikeja
Pakistan Islamabad
US Education Foundation
Pakistan
Hse 3 & 5, St 17 & 18,
F-6/2,
44000
Pakistan Karachi
(Karachi)
H#F-47/1 Park Lane,
Block#5, K.D.A Scheme#5
Pakistan Lahore
(Lahore)
H#19, F.C. College
Peru Lima
Instituto Cultural Peruano
Norteamericano
Avenida Angamos Oeste
160, Mirafores
18
Phillippines Cebu City
c/o Train, Educ & Dev Cons
Inc. Suite
308-Centro Maximo D
Jakosalem Street
Phillippines Makati City
Ateneo Professional Schools,
130 H
De La Costa Street, Salcedo
Village
1200
Poland Warsaw Polish-Japanese Institute of IT
lll.Floor ul. Nowogrodzka
84/86
02-018
Portugal Lisbon
Universidade Lusofona de
Humanidades e
Tecnologias, Campo
Grande, 376
1749-024
Puerto Rico Guaynabo Metro Square Bldg. Suite 114 Street 1 Metro Offce Park 00968-1705
Puerto Rico Baltimore Ernestos Desk 21202
Russia Moscow
Amer. Center for Education &
Testing
2 Leninskii Prospekt /
Room 530
117049
Russia St. Petersburg
Central City Library,
Mayakovskogo
Nab. Fontanka 46, 2nd
Floor
191025
Saudi
Arabia
Dammam Men
Chamber of Commerce &
Industry
Eastern Province Training
Center
31421
Saudi
Arabia
Dammam
Women
Chamber of Commerce &
Industry
Eastern Province Training
Center
31421
Candidates Handbook
55
Singapore Singapore
Informatics Campus, Prometric
Test Center
Blk A Lvl3, 10-12 Science
Centre Road
609080
Slovenia Ljubljana QSTC D.O.O. Neubergerjeva 31 1000
South Africa Cape Town
New Horizons, 2nd Floor, FNB
Building
33 Heerengracht
South Africa Johannesburg
Block C, Empire Park
55 Empire Road
Parktown 2193
Spain Barcelona
IEN Institute of N. American
Studies
Via Augusta 123 08006
Spain
Villaviciosa de
Odn (Madrid)
Edifcio C, Universidad Europa
de Madrid
C/ Tajo S/N URB. El
Bosque
280670
Switzerland Geneva
International University in
Geneva
ICC Building, Route de Pre-
Bois 20
1215
Thailand Bangkok
Institute of International
Education
6th Floor Maneeya Center
North
10330
Turkey Ankara Turkish American Association
Cinnah Caddesi 20,
Kavaklidere
06690
Turkey Izmir Turkish American Association
Alsancak, 1379 Sokak No.
39
35210
Turkey
Nisantasi-
Istanbul
Bil-Merk
Rumeli Cad. Villa Han 4-6 A
Block K:6
80220
Taiwan Kaohsiung
The Language Training &
Testing Center
7F, 2 Chung-Cheng 3rd
Road
800
Taiwan Taipei
The Language Training &
Testing Center
170 Hsin-Hai Road, Sec 2 106
Tazania Dar Es Salaam University of Dar Es Salaam
University Computing
Center
Uganda Kampala Cyber Networks Uganda House, 8th Floor
Ukraine Kyiv IREX Kyiv, 6th Floor Vul. Pecherskyy Uzviz 3 01023
United Arab
Emirates
Dubai
AMIDEAST/CERT, Suite GO1,
Building 2B
Knowledge Village A, Al
Soufouh Road
United
Kingdom
Birmingham Prometric, Part Ground Floor
Beaufort Hse, 94-96
Newhall St.
B3 1PB
United
Kingdom
Bournemouth
Prometric, Suite 8, Roddis
House
4-12 Old Christchurch Road BH1 1LG
United
Kingdom
Bristol Prometric, Part 5th Floor 4 Colston Avenue BS1 4ST
United
Kingdom
Cardiff
Prometric, Part 1st Floor, West
Wing
Windsor House, Windsor
Place
CF10 3DE
United
Kingdom
Edinburgh Prometric, Suite 3, 1st Floor
Glenorchy Hse, 20 Union
St.
EH1 3LR
United
Kingdom
Glasgow 3rd Floor, Skypark1 Elliot Street G3 8EP
Candidates Handbook
56
United
Kingdom
Leeds
Prometric, Part 3rd Floor
Offces
Atlas House, 31 King Street LS1 2HL
United
Kingdom
London Prometric, 2nd Floor
Pellipar House, 9 Cloak
Lane
EC4R 2RU
United
Kingdom
Manchester
Prometric, Unit 38 Waterfront
Offces
Exchange Quay, Salford
Quays
M5 3EJ
United
Kingdom
Newcastle Prometric, 2nd Floor
Melbourne Hse, Melbourne
St..
NE1 2JQ
United
Kingdom
Peterborough
Prometric, 2nd Floor (Front)
Offce Suite
41 Broadway PE1 1SJ
Uzbekistan Tashkent Global Study 38 Gulyamov Str. 700000
Venezuela Caracas
Asociacion Venezolano-
Americana de Amistad
Av Libertador, Multicentro
Empresarial d Este
1060
Virgin
Islands
Christiansted Pentheny Building 46 King Street 00820
Zimbabwe Harare iWynSys
146 Samora Machel
Avenue East
Candidates Handbook
57
Appendix C:
Sample References
The following references are listed solely as examples of the many books available that provide detailed
technical information on the wireless technologies which may be covered by the IEEE WCET certifcation
examination. The list is far from exhaustive; many other useful publications exist and should be considered by
applicants while studying for the examination. Inclusion on this list is not intended as an endorsement of any
book, nor does absence from this list imply anything about the content or utility of any reference.
1. Wireless Communications, Principles and Practice (2
nd
Ed.), T. S. Rappaport, Prentice Hall, 2002.
2. Wireless Communications and Networking, J. W. Mark & W. Zhuang, Prentice Hall India, 2006.
3. WCDMA for UMTS, Radio Access for Third Generation Mobile Communications (3
rd
Ed.), Editors: H.
Holma & A. Toskala, Wiley, 2004.
4. Digital Communications (5
th
Ed.), J. G. Proakis & M. Salehi, McGraw Hill, 2008.
5. Error Control Coding (2
nd
Ed.), S. Lin & D. J. Costello, Jr., Prentice Hall, 2004.
6. Location Management Routing in Mobile Networks, A. Mukherjee, Artech House Books, UK, April 2003.
7. Internet Protocols, Advances, Technologies, and Applications, S. Goswami, Kluwer Academic Publishers,
2003.
8. Designing and Developing Scalable IP Networks, G. Davies, Wiley, 2004.
9. Satellite Communications & Networks: Systems, Techniques and Technology (2
nd
Ed.), G. Maral & M.
Bousquet, Wiley, 1995.
10. Wireless Communications & Networks (2
nd
Ed.), W. Stallings, Prentice Hall, 2005.
11. WCDMA (UMTS) Deployment Handbook, Planning and Optimization Aspects, Editors: C. Chevallier, C.
Brunner, A. Garavaglia, K. P. Murray, & K. R. Baker, Wiley, 2006.
12. UMTS Performance Measurement, A Practical Guide for KPIs for the UTRAN Environment, R. Kreher,
Wiley, 2006.
13. HSDPA/HSUPA for UMTS, H. Holma & A. Toskala, Wiley, 2006.
14. RF and Wireless Technologies, B. Fette, R. Aiello, P. Chandra, D. M. Dobkin, A. Bensky, D. Miron, D. A. Lide, F.
Dowla, & R. Olexa, Elsevier-Newness, 2008.
15. Wireless Information Networks (2
nd
Ed.), K. Pahlavan & A. H. Levesque, Wiley, 2005.
16. Fundamentals of WiMAX: Understanding Broadband Wireless Networking, J. Andrews, A. Ghosh, & R.
Muhamed, Prentice Hall, 2007.
17. The Mobile Communications Handbook (2
nd
Ed.), J. D. Gibson (Editor-in-Chief), CRC Press, 1999.
18. Digital Communications, Fundamentals and Applications (2
nd
Ed.), B. Sklar, Prentice Hall, 2002.
19. Computer Networking: A Top-Down Approach Featuring the Internet, J. Kurose & K. Rose, Addison
Wesley, 2007.
20. Internetworking With TCP/IP Volume 1: Principles Protocols, and Architecture, (5
th
Ed.), D. Comer,
Prentice Hall, 2006.
21. 802.11 Wireless LAN Fundamentals, P. Roshan & J. Leary, Cisco Press, 2004.
22. Radio Network Planning and Optimisation for UMTS, J. Laiho, A. Wacker, & T. Novosad, Wiley, 2006.
23. OFDM for Wireless Multimedia Communications, R. Van Nee & R. Prasad, Artech House Publishers, 2000.
24. DC Power System Design for Telecommunications, W. D. Reeve, Wiley-IEEE Press, 2006.
25. GSM Switching, Services and Protocols, J. Eberspacher, H-J. Vogel & C. Bettstetter, Wiley, 2001.
26. Wireless Communications, A. F. Molisch, Wiley-IEEE Press, 2007.
27. The cdma2000 System for Mobile Communications: 3G Wireless Evolution, V. Vanghi, A. Damnjanovic, B.
Vojcic, Prentice Hall, 2004.
28. CDMA 2000 Evolution: System Concepts and Design Principles, K. Etemad, Wiley, 2004.
29. Handbooks of the International Telecommunications Union Radiocommunications Sector (ITU-R),
e.g., Land Mobile Handbook, Satellite Communications Handbook.
30. Fundamentals of Wireless Communications, D. Tse, P. Viswanath, Cambridge University Press, 2005.
Candidates Handbook
58
Appendix D:
Sample Examination Questions
The following questions are typical of those that will be used on IEEE WCET certifcation examinations. An
answer key may be found at the end of this Appendix.
1. A mobile terminal moving at a speed of 30 m/sec is receiving a signal with a center frequency of 2 GHz,
having a bandwidth of 5 MHz. The received signal has a delay spread of 2 sec. The Doppler spread of
the received signal is approximately:
1. 200 Hz
2. 400 Hz
3. 0.5 MHz
4. 2.5 MHz
2. In a CDMA cellular system, the coverage region of a cell located in a dense urban environment at 5:00 PM
(busy hour) is most likely to be:
1. smaller than the coverage of 3:00 AM (dead hour) because of higher cell loading.
2. the same as the coverage at 3:00 AM (dead hour) because propagation remains the same.
3. the same as the coverage at 3:00 AM (dead hour) because transmit power remains the same.
4. smaller than the coverage at 3:00 AM (dead hour) because of more signal fading due to more cars
on the street.
3. Consider a receiver with an effective noise temperature of 33 C (306 K) and a 0.7-Hz bandwidth.
Boltzmanns constant is 1.38 1023 Joules/degree K. The equivalent thermal noise of the receiver
input is:
1. 115.3 dBW
2. 140 dBW
3. 203.7 dBW
4. 228 dBW
4. In 802.11 using RTS/CTS as an access scheme where the duration of RTS, CTS, and an ACK are all equal
to T, the Short Interframe Spacing duration equals S and the data packet duration of the transmitting
source is D, the total period allocated to the transmitting terminal and no others is:
1. 3T+2S+D
2. 3T+3S+D
3. 3T+4S+D
4. 3T+S+D
5. The choice of a duplexing method depends on the:
1. nature of the available spectrum and of the traffc in uplink/downlink.
2. modulation type.
3. chosen multiple access technology.
4. modulation type and the multiple access technology.
Candidates Handbook
59
6. The relationship among the IEEE 802.11 timing parameters is:
1. SIFS<DIFS<PIFS.
2. PIFS<SIFS<DIFS.
3. SIFS>PIFS>DIFS.
4. SIFS<PIFS<DIFS.
7. Which of the following OSI layers is responsible for error recovery and reliability?
1. Data link
2. Session
3. Application
4. Physical
8. To overcome the near-far-problem, the CDMA implementation for cellular telephony uses:
1. different pseudorandom codeword for each user.
2. power control.
3. cochannel cells.
4. spreading signal.
9. A fundamental architectural difference between Mobile IPv4 and Mobile IPv6 is that:
1. Mobile IPv4 dynamic home agent discovery returns a single reply to the mobile node.
2. Mobile IPv6 provides secure but less optimized routes than Mobile IPv4.
3. Mobile IPv6 does not require Foreign Agent (FA).
4. Mobile IPv6 does not require Home Agent (HA).
Answers: Q1 1; Q2 1; Q3 3; Q4 2; Q5 1; Q6 4; Q7 1; Q8 2; Q9 3
Candidates Handbook
60
IEEE WCET Glossary
Term Description Description Term
3G
3GPP
3GPP2
A
A5
AAA
AAD
ACK
ACM
ADC
AES
AF
AFD
AGC
AM
AMC
AMPS
ANM
ANSI
AODR
AP
AR
ARIB
ARQ
AS
ASCII
ASK
ASN
ASN.1
ASP
ATI S
ATM
ATPC
AuC
AUT
AUTN
AUTS
AWGN
AWS
BCMCS
BE
BER
BGP
BSC
BSS
BTS
CB
CBC
CBC-MAC
CC
CCCH/BCCH
CCI
CCM
CCMP
CCSA
CDMA
CGM
CID
CIR
CM
CMA
CNR
COFDM
COMP128
CP
CP
CPC
CQI
CRC
CRC-32
CS
CSA
CSCF
CSMA/CA
CSMA/CD
CSN
CST
CTIA
CTS
DARPA
dBi
dBm
dBr
DCF
DCH
DoS
DDoS
DECT
DES
DIFS
DL
DMB
DNS
DPCCH
Third Generation
third Generation Partnership Project
3G Partnership Project 2
Availability
Encryption algorithm
Authentication Authorization Accounting
Additional authentication data
Acknowledgement
Address Complete Message
Analog to Digital Converter
Advanced Encryption Standard
Diffserv Assured Forwarding
Average Fade Distortion
Automatic Gain Control
Amplitude Modulation
Adaptive Modulation and Coding
Advanced Mobile Phone Service (System)
Answer Message
American National Standards Institute
Ad hoc On Demand Routing
Access Point
Axial Ratio for Elliptical Polarization
Association of Radio Industries and Business
Automatic Repeat-Request
Application Server
American Standard code for Information Interchange
Amplitude Shift Keying
Access Service Network
Abstract Syntax Notation One
Application Service Provider
Association Telecommunications Industries Standards
Asynchronous Transfer Mode
Automatic Transmit Power Control
Authentication Center
Antenna Under Test
Network authentication token
Token used in resynchronization
Additive White Gaussian Noise
Advanced Wireless Services
Broadcast and Multicast Services
Best Effort
Bit Error Rate
Border Gateway Protocol
Base Station Controller
Basic Service Set
Base Transceiver Station
Certifcation Body
Cipher Block Chaining Message
Cipher Block Chaining Message Authentication Code
Call Control
Common Control Channel Broadcast Control Channel
Co Channel Interference
CTR Mode with CBC-MAC
Counter Mode with Cipher Block Chaining Message Authentication
Code Protocol
China Communications Standard Association
Code Division Multiple Access
Conjugate Gradient Method
Connection ID
Carrier to Interference Ratio
Connection Management
Constant Modulus Algorithm
Carrier-to-noise Ratio
Coded Orthogonal Frequency Division Multiplexing
Algorithm
Cyclic Prefx
Circular Polarization
Cyclic Prefx Code
Channel Quality Indicator
Cyclic Redundancy Check
Cyclic Redundancy check 32 bits
Coding Scheme
Canadian Standard Association
Call Session Control Function
Carrier Sense Multiple Access with Collision Avoidance
Carrier Sense Multiple Access with Collision Detection
Connectivity Service Network
Computer Simulation Technology
International Association for the Wireless Telecommunications
Industry
Clear To Send
Defense Advanced Research Projects Agency
Decibel Isotropic
Decibel milliwatt
Decibel Relative
Distributed Coordination Function
Dedicated Channel
Denial-of-Service
Distributed Denial-of-Service
Digital Enhanced Cordless Telephony
Data Encryption Standard
Distributed Inter Frame Space
Down Link
Digital Multimedia Broadcasting
Domain Name System
Dedicated Physical Control Channel
Appendix E:
Glossary
Candidates Handbook
61
DPSK
DQPSK
DS-CDMA
DRA
DRC
DSL
DSR
DSSS
DSS1
DVB-H
DWDM
EAP
EAP-FAST
EAPoL
EAP-TLS
EAP-TTLS
E-DCH
EDGE
EF
EGC
EGPRS
EIA
EIR
EIRP
EM
EP
ERP
ESS
ET
eTOM
ETSI
FA
FACA
FBSS
FCAPS
FCC
FDD
FDMA
FDTD
FEM
FFT
FHSS
FSK
FSO
FSS
G.711
GEO
GGSN
GKH
GMSC
GMSK
GPRS
GPS
GSM
GTC
H.263
H.264
HA
HARQ
HDLC
HE
HFSS
HHO
Hi-Cap
HLR
HLR/AUC
HN
HO
HSDPA
HS-DSCH
HSPA
HSS
HSUPA
HTTP
IBSS
ICMP
I-CSCF
ICV
IDEN
IDU
IEC
IECEE
IETF
IF
IFFT
IK
IKE
IMS
IMSI
IMT-2000
IP
IP v4
IP v6
IP-CAN
IPSec
IS-136
IS-95
ISAKMP
ISI
ISIS
ISM
ISO
ISUP
Differential Phase Shift Keying
Differential Quadrature (or quaternary) Phase Shift Keying
Direct Sequence Code Division Multiple Access
Dielectric Resonator Antenna
Data Rate Control
Digital subscriber Line
Dynamic Source Routing
Direct Sequence Spread Spectrum
Digital Subscriber Signaling System 1
Digital Video Broadcast Handheld
Dense Wavelength Division Multiplexing
Extensible Authentication Protocol
EAP Flexible Authentication via Secure Tunneling
EAP Over LAN
EAP Transport Layer Security
EAP Tunneled TLS
Enhanced Dedicated Channel
Enhanced Data Rates for GSM Evolution
Diffserv Expedited Forwarding
Equal Gain Combining
Enhanced GPRS
Electronic Industries Alliance
Equipment Identity Register
Effective Isotropic Radiated Power
Electromagnetic
Elliptical Polarization
Effective Radiated Power
Extended Service Set
Error Tracking
Enhanced Telecom Operations Map
European Telecommunications Standard Institute
Foreign Agent
US Federal Advisory Committee Act
Fast Base Station Switching
Fault Confguration Accounting Performance and Security
Federal Communications Commission
Frequency Division Duplex
Frequency Division Multiple Access
Finite Difference Time Domain
Finite Element Method
Fast Fourier Transform
Frequency Hop Spread Spectrum
Frequency Shift Keying
Free Space Optics
Frequency Selective Surfaces
Encoder
Geostationary Earth Orbit
Gateway GPRS Support Node
Group Key Hierarchy
Gateway Mobile Switching Centre
Gaussian Minimum Shift Keying
General Packet Radio Service
Global Positioning System
Global System for Mobile Communications
Generic Token Card
Video Codec Low-Bit rate
Video Codec MPEG-4 Advanced Video Codec
Home Agent
Hybrid Automatic Repeat Request
High-level Data Link Control
Home Environment
High Frequency Structure Simulator
Hard Handoff
High Capacity
Home Location Register
Home Location Register/Authentication Center
Home Network
Handoff
High Speed Down Link Packet Access
High Speed Downlink Shared Channel
High Speed Packet Access
Home Subscriber Server
High-Speed Uplink Packet Access
Hypertext Transfer Protocol
Independent Basic Service Set
Internet Control Message Protocol
Interrogating CSCF
Integrity Check Value
Integrated Digital Enhanced Network
Indoor Unit
International Electro technical Commission
International Electrotechnical Committee for Conformity Testing to
standards for Electrical Equipment
Internet Engineering Task Force
Intermediate Frequency
Inverse Fast Fourier Transform
integrity key
Internet Key Exchange
IP Multimedia Subsystem
International Mobile Subscriber Identity
International Mobile Telecommunications 2000 ITU standard
Internet Protocol
Internet Protocol Version 4
Internet Protocol Version 6
IP Connectivity Access Networks
Protocols for Security
Interim Standard 136
Interim Standard 95
Internet Security Association and Key Management Protocol
Inter-symbol Interference
Intermediate System to Intermediate System
Industrial, Scientifc, and Medical (Band)
International Standard Organization
ISDN User Part
Candidates Handbook
62
ISUP IAM
I-TCP
ITIL
ITU
ITU-R
ITU-T
KA
KC
KCK
KEK
LAN
LEO
LH
LMS
LO
Lo-Cap
LOS
LP
LR-WPAN
LS-CMA
LTE
MAC
MAC
MAC-S
MAN
MAP
MBMS
MCW
MD5
MDHO
MDS
MEdiaFLO
MGCF
MGW
MIB
MIC
MIMO
MIP
MISO
MM
MMUSIC
MoM
MOS
MPDU
MPEG
MPLS
MR
MRC
MRF
MS
MSC
MSC/VLR
ISUP Initial Address Message
Indirect Transmission Control Protocol
Information Technology` Infrastructure Library
International Telecommunication Union
International Telecommunication Union Radio
ITU-Telecommunication (standards sector)
Knowledge Area
Ciphering Key
EAPoL Key Communication Key
EAPoL Key Encryption Key
Local Area Network
Low Earth Orbit
Left Hand Circular Polarization
Least Mean Square
Local Oscillator
Low Capacity
Line of Sight
Linear Polarization
Low Rate Wireless Personal Area Network
Least Squares Constant Modulus Algorithm
Long Term Evolution
Media Access Control
Message Authentication Code
Authentication token used in resynchronization
Metropolitan Area Network
Mobile Application Part
Multimedia Broadcast/Multicast Service
Multi Codeword
Message digest 5
Macro Diversity Handover
Minimum Discernible Signal
Forward Link Only Technology
Media Gateway Control Function
Media Gateway
Management Information Base
Message Integrity Code
Multiple-Input Multiple-Output
Mobile IP
Multiple Input Single Output
Mobility Management
Multiparty Multimedia Session Control
Method of Moments
Mean Opinion Score
MAC Protocol Data Unit
Moving Picture Expert Group
Multiprotocol Label Switching
Mesh Router
Maximum Ratio Combining
Media Resource Function
Mobile Station
Mobile Switching Center
Mobile Switching Center/Visitor Location register
MSK
MSS
MTBF
MTTR
MU-MIMO
NACK
NAS
NAV
NCRP
NEBS
NEC
NF
NFC
NGMC
NGMN
NGN
NIC
NIST
NLOS
NMHA
NMS
NPA
NRSC
NRZ
NSP
NSS
NSTAC
OATS
ODU
OFDM
OFDMA
OGC
OLSR
OSA
OSI
OSPF
OSS/BSS
OTA
OTP
PA
PAN
PAPR
PBCCH
PCM
P-CSCF
PDC
PDSN
PDU
PEAP
PFDM
PHY
PIFA
Minimum-Shift Keying
Maximum Segment Size
Mean Time Between Failures
Mean Time To Repair
Multiple User MIMO
Negative Acknowledge
Network Access Server
Network Allocation Vector
National Council on Radiation Protection
Network Equipment Building Systems standard
Numerical Electromagnetics Code
Noise Figure
Near Field Communication
Next Generation Mobile Committee
Next Generation Mobile Networks
New Generation Network(s)
Network Interface Card
National institute of Standards and Technology
Non-Line-of-Sight
Normal Mode Helical Antenna
Network Management System
Nonlinear Power Amplifer
Network Reliability Steering Committee
Non-Return to Zero
Network Service Provider
Network Subsystem
National Security Telecommunications Advisory Committee( US)
Open Area Test Site
Outdoor Unit
Orthogonal Frequency Division Multiplexing
Orthogonal Frequency Division Multiple Access
Offce of Government Commerce
Optimized Link State Routing
Opportunistic Spectrum Address
Open Systems Interconnection
Open Shortest Path First
Operational and Business Support Systems
Over The Air Programming
One Time password
Power Amplifer
Personal Area Network
High Peak to Average Power Ratio
Packet Broadcast Control Channel
Pulse Code Modulation
Proxy CSCF
Personal Digital Cellular
Packet Data Serving Node
Protocol Data Unit
Protected EAP
Orthogonal Frequency Division Multiplex
Physical (layer)
Planar Inverted F Antenna
Candidates Handbook
63
PIN
PKH
PL
PLMN
PN
PO
PPP
PS
PSK
PSTN
QAM
QoS
QPSK
RAB
RACH
RADIUS
RAN
RAND
RC4
RET
RF
RFC
RFC
RFID
RHCP
RIP
RLS
RMON
RNC
ROAMOPS
ROHC
RR
RRC
RSA
RSN
RSNA
RTP
RTS
RTT
S/N
SA
SAR
SCCP
SCP
SCTP
S-CSCF
SCTP
SCW
SDCCH
SDH
Personal Identifcation Number
Pairwise Key Hierarchy
Path Loss
Public Land-Mobile Network
Pseudo-Noise
Physical Optics
Point to Point Protocol
Packet Switched
Phase Shift Keying
Public Switched Telephone Network
Quadrature Amplitude Modulation
Quality of Service
Quadrature (Quaternary) Phase Shift Keying
Radio Access Bearer
Random Access Channel
Remote Access Dial In User Server
Radio Access Network
Random
RC4 Cipher Algorithm
Remote Electrical Tilt
Radio Frequency
Request For Comment
Request for Change
Radio Frequency Identifcation
Right Hand Circular Polarization
Routing Information Protocol
Recursive Least Squares
Remote Network MONitoring
Radio Network Controller
IETF Roaming Operations
Robust Header Compression
Radio Resource
Radio Resource Control
Rivest Shamir Alderman
Robust Security Networks
Robust Security Network Associations
Real Time Protocol
Request to Send
Round Trip Time
Signal to Noise Ratio
Security Association
Specifc Absorption Rate
Signaling Connection Control Protocol
ETSI Smart Card Platform
Stream Control Transmission Protocol
Serving CSCF
Stream Control Transmission Protocol
Single Codeword
Stand Alone Dedicated Channel
Synchronous Digital Hierarchy
SDMA
SDR
SEGF
SET
SF
SFDR
SFID
SGSN
SGW
SHA
SID
SIFS
SIG
SIGTRAN
SIM
SIMO
SIP
SIR
SISO
SLF
SMI
SMS
SM-SC
SMTP
SNMP
SNR
SPC
SQN
SRES
SRTP
SS7
SSB
SSID
SSPA
STA
STM
SYN
T2P
TCAP
TCH
TCH/FS
TCH/HS
TCP
TCP/IP
TD-CDMA
TDD
TDMA
Space Division Multiple Access
Software Defned Radio
Security Gateway Function
Secure Electronic Transaction
Spreading Factor
Spurious Free Dynamic Range
Service Flow ID
Serving GPRS Support Node
Signaling Gateway
Secure Hash Algorithm
System Identifcation Number
Short Inter-Frame Space
Special Interest Group of WWRF
Signal Transport
Subscriber Identity Module
Single Input Multiple Output
Session Initiation Protocol
Signal to Interference Ratio
Single Input Single Output
Subscriber Location Function
Structure of Management Information
Short Message Service
Short Message Service Center
Simple Message Transfer Protocol
Simple Network Management Protocol
Signal-to-Noise Ratio
Single Parity Check
Sequence Number
Signed Response
Secure RTP
Signaling System 7
Single Sideband
Service Set Identifer
Solid State Power Amplifer
Stations
Synchronous Transfer Mode
Synchronization
Traffc To Pilot
Transaction Capabilities application Part
Traffc Channel
Traffc Channel Full Rate Speech
Traffc Channel Half Rate Speech
Transmission Control Protocol
Suite of Protocols
Time Division CDMA
Time Division Duplex
Time Division Multiple Access
Candidates Handbook
64
Time Difference Of Arrival
Time Division Synchronous CDMA
Telecommunications Industry Association
Temporal Key
Temporary Key Integrity Protocol
TM Forum
TDMA-based Randomly Addressed Polling
Encryption Standard
Time Slot
TKIP Sequence Counter
TSG Core Network & Terminals
TSG GSM EDGE Radio Access Network
TSG Radio Access Network
ETG Services & System Aspects
Telecommunications Technology Association of Korea
Telecommunications Technology Committee
User Datagram Protocol
User Equipment
Underwriters Laboratories
Ultra Mobile Broadband
Universal Mobile Telecommunications System
Protocol used in 3G
Uninterruptible Power Supply
United States Geological Survey
UMTS SIM
Universal Terrestrial Radio Access
TD-CDMA UTRA MODE
TD-SCDMA UTRA MODE
UMTS Terrestrial Radio Access Network
Ultra-Wideband
Visitor Location Register
Visited Network
Voice Over Internet Protocol
Very Small Aperture Terminal
Voltage Standing Wave Ratio
Wide Area Network
Wideband CDMA
Wireless Communication Engineering Technologies
Wireless Communications Professional
Wireless Encryption Protocol
Wireless Emergency Response Team
Working Group of WWRF
Wireless Fidelity
Worldwide Interoperability for Microwave Access
Wireless World Initiative New radio
Wireless Local Area Network
Wireless Metropolitan Area Network
Wireless Mesh Network
Wi-Fi Protected Access
Wireless Personal Area Network
World Radio Communication Conference
Wireless World Research forum
Next Generation
XML Key Management Services
Cryptographic primitive in the 3GSM Key Generation Process
Exclusive Or
Zone Routing Protocol
TDOA
TD-SCDMA
TIA
TK
TKIP
TMF
TRAP
Triple DES
TS
TSC
TSG CT
TSG GERAN
TSG RAN
TSG SA
TTA
TTC
UDP
UE
UL
UMB
UMTS
UMTS AKA
UPS
USGS
USIM
UTRA
UTRA TDD-HCR
UTRA TDD-LCR
UTRAN
UWB
VLR
VN
VoIP
VSAT
VSWR
WAN
W-CDMA
WCET
WCP
WEP
WERT
WG
WiFi
WiMAX
WINNER
WLAN
WMAN
WMN
WPA
WPAN
WRC
WWRF
XG
XKMS
XMAC (PG 26)
XOR
ZRP
Candidates Handbook
65
Constants, Conversions and Equations
11/30/09 (v11) -1-
WCET Glossary, Constants, Equations
November 30, 2009 (Version 11)

Constants and Conversions
Boltzmannsconstant:
23
1.38 10 k

= Joules/Kelvin
Speed of light:
8
3 10 c= meters/second
Radius of the earth: R ~ 6,367 km
Natural log base: 2.718 e ~
Log base conversion:
2
log ( ) (ln ) /(ln2) 1.443ln x x x = ~

Equations
Radiowave propagation in free space:
2
4
r
t r
t
P
GG
P d
t
| |
=
|
\ .

Total path loss:
2
0
0
( )
4
n
tot
d
L d
d d
t
| |
| |
=
| |
\ .
\ .

Approximate LOS distance to the radio horizon:
17 d h ~
,
with d given in km and h in meters

LOS clearance above an obstacle (metric):
( )
1 2
1 2
17.3
d d
R
F d d
=
+

with d
1
and d
2
given in km, F in GHz, and R in meters
Candidates Handbook
66
11/30/09 (v11) -2-
Wavelength: / c f =

Maximum Doppler frequency shift:
/
m
f v =

Level-crossing rate (Rayleigh fading):
2
2
R m
N f e

t

=

Average fade duration (Rayleigh fading):
2
1
2
m
e
f
t
t
=

Erlang B distribution:
0
/ !
/ !
C
C
k
k
A C
P
A k
=
=

Channel capacity:
2
log 1
S
C W
N
| |
= +
|
\ .

Antenna design equations
Antenna Gain:
rad
ant
rad loss
R
G DE D
R R
= =
+

11/30/09 (v11) -3-
Parabolic antenna directivity:
2
2
ap
r
D
t
c
| |
=
|
\ .

Near/far-field boundary:
2
2L
R
=
Noise figure calculations

3 2
1
1 1 2
1 1
...
sys
F F
F F
G GG

= + + +

Abbreviations and Acronyms
3GPP = third generation partnership project

A = availability
ACK = acknowledgement
ADC = analog to digital converter
AFD = average fade distortion
AM = amplitude modulation
AES = advanced encryption standard
AMPS = advanced mobile phone service (system)
AODR = ad hoc on demand routing
AP = access point
ARQ = automatic repeat-request
ASK = amplitude shift keying
ASN.1 = abstract syntax notion one
ATPC = automatic transmit power control
AS = autonomous system
AUC = authentication center
Candidates Handbook
67
Appendix F:
Forms
SPECIAL TESTING ACCOMMODATION REQUEST FORM
Candidates with disabilities covered by the Americans with Disabilities Act, the Canadian/Australian
equivalent, or other similar national laws should complete this form and have an appropriate licensed
professional complete the Documentation of Disability-Related Needs form so their requests for
accommodations can be processed effciently. The information provided and any documentation regarding
the disability and the need for accommodation in testing will be treated with strict confdentiality.
APPLICANT INFORMATION
Last Name: ___________________________First Name: _____________________Middle Initial: ___
Address:_____________________________________________________________________________
City: _______________________State: ______ ZIP/Postal Code: ___________ Country:____________
Primary Telephone Number: ___________________________
IEEE WCET ID Number: ____________________________
Testing Wndow ________________________________________________________________________
SPECIAL TESTING ACCOMMODATIONS
Please check the accommodation(s) that you require: (Check all that apply.)
o Wheelchair access
o Special seating
o Reader
o Recorder
o Extended testing time (time and a half)
o Separate testing area
o Zoom text font size
oOther special accommodations (please specify) ___________________________________________
Please mail, email, or fax this competed form (along with a copy of your Candidate Profle page) to PES
within ten (10) business days of submitting your application.
Mail, email, or fax the form to:
Professional Examination Service
475 Riverside Drive, 6th Floor
WCET Testing Offce (431)
fax: +1 917 305 9879
Candidates Handbook
68
DOCUMENTATION OF DISABILITY-RELATED NEEDS BY QUALIFIED PROFESSIONAL
This section must be completed by a licensed health care provider or an educational or testing professional
to ensure that PES is able to provide the required test accommodations.
The nature of the disability, identifcation of the test(s) used to confrm the diagnosis, a description of past
accommodations made for the disability, and the specifc testing accommodations requested must be
included.
PROFESSIONAL DOCUMENTATION
I have known _____________________________________________ since ______________________
(Name of Applicant) (Date)
In my capacity as a(n) __________________________________________________________________
(Professional Title)
The applicant discussed with me the nature of the test to be administered. It is my opinion that, because
of this applicants disability described below, he or she should be accommodated by providing the special
arrangements listed on the Special Testing Accommodation Request form.
Comments: _____________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Signature: __________________________________ Printed Name: ________________________________
Title: ________________________________________________ Date: _____________________________
License No. _____________________________________________________________________________
(if applicable)
Please mail, email, or fax this competed form (along with a copy of your Candidate Profle page) to PES
within ten (10) business days of submitting your application.
Mail, email, or fax the form to:
Professional Examination Service
475 Riverside Drive, 6
th
Floor
WCET Testing Offce (431)
fax: +1 917 305 9879
Candidates Handbook
69
SUPPPORTING DOCUMENTATION OF WIRELESS COMMUNICATION
ENGINEERING EXPERIENCE
Candidates who have been asked to submit additional documentation of their wireless communication
engineering experience should use this form. If more than one position requires supporting documentation,
please photocopy this form as needed.
Name: ____________________________________ Job Title: _______________________________________
Organization Name: ________________________________________________________________________
Organization Address: _______________________________________________________________________
Supervisors Printed Name: __________________________________________________________________
Supervisors Telephone Number: ______________________________________________________________
Supervisors Email: _________________________________________________________________________
Supervisors Signature: ______________________________________________________________________
Dates Employed: From: ____________________________ To: _____________________________________
(Month/Year) (Month/Year)
Estimated percent of time spent in wireless communication engineering: ______________________%
Job Duties and Responsibilities: _______________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
I understand that any decision regarding the misrepresentation or falsifcation of information on my
application will be made on the basis of this and any other documentation submitted with this form, and that
if my application is denied due to such misrepresentation or falsifcation, I will forfeit all fees.
Candidates Signature: ________________________________________ Date: ____________________
Candidates Printed Name: ______________________________________________________________
Home Telephone Number: ____________________IEEE WCET ID # (if previously assigned): ________________
Return this form with any other supporting documentation to:
WCET Certifcation Program
Fax: +1 212 705 8999
Candidates Handbook
70
the Global Community of Communications Professionals
Candidates Handbook
71
About the IEEE Communications Society
The IEEE Communications Society is a diverse group of industry professionals with a common interest
in advancing all communication technologies. Individuals within this unique community interact across
international and technological borders to produce publications, organize conferences, foster educational
programs, promote local activities, and work on technical committees.
Website: www.comsoc.org
Conferences
Every year, the IEEE Communications Society sponsors major conferences that attract hundreds of the best
quality paper/presentation submissions and attendees. Held at convenient locations around the world, these
meetings attract thousands of participants who have much to share beyond their strong desire to learn.
Communications Society conferences and workshops provide ideal opportunities to be a part of the latest
technological developments and network with the leaders who are changing the world of communications.
IEEE/OSA Conference on Optical Fiber Communications/National Fiber Optic Engineers Conference
(OFC/NFOEC)
IEEE Wireless Communications and Networking Conference (WCNC)
IEEE/IFIP Network Operations & Management Symposium (NOMS)
IFIP/IEEE International Symposium on Integrated Network Management (IM)
IEEE International Conference on Communications (ICC)
IEEE International Enterprise Networking & Services Conference (ENTNET)
IEEE Conference on Computer Communications (INFOCOM)
IEEE/AFCEA Military Communications Conference (MILCOM)
IEEE Global Communications Conference (GLOBECOM)
IEEE Consumer Communications & Networking Conference (CCNC)
IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)
IEEE Conference on Sensor and Ad Hoc Communications and Networks (SECON)
IEEE International Symposium on Dynamic Spectrum Access Networks (DySPAN)
IEEE International Symposium on Power Line Communications and Its Applications (ISPLC)
Publications
IEEE Communications Magazine
IEEE Network: The Magazine of Global Internetworking
IEEE Wireless Communications
IEEE Communications Letters
IEEE Transactions on Communications
IEEE Journal on Selected Areas in Communications
IEEE/ACM Transactions on Networking
IEEE Transactions on Wireless Communications
Transactions on Network and Service Management (TNSM)
IEEE Communications Surveys & Tutorials
IEEE Transactions on Mobile Computing
IEEE/OSA Journal of Lightwave Technology
IEEE/OSA Journal of Optical Communications and Networking
ComSoc e-News
ComSoc Digital Library
IEEE Wireless Communications Professional e-newsletter
Candidates Handbook
72
Top 5 Reasons
for Organizations to
Support the IEEE WCET
Credential
Candidates Handbook
73
Top 5 Reasons for Organizations to Support the IEEE WCET
Credential
Leading organizations around the world have found that it pays to invest in professional
credentialing. The IEEE Wireless Communications Professional (WCP) credential is designed to
have high pay-off for your organization and for the wireless communications industry.
1. IEEE WCP credential holders have demonstrated their knowledge of wireless
engineering technology concepts and terminology. To obtain the IEEE WCP credential,
candidates must pass a rigorous examination based on the validated body of knowledge
underlying the tasks performed in the industry.
2. IEEE WCP credential holders are applied practitioners. Credential holders are tested not
only on their knowledge of wireless communication engineering technology and practice,
but also on their skills using that knowledge to perform and to develop and implement
high-quality deliverables.
3. IEEE WCP credential holders have successfully responded to a signifcant challenge.
They have demonstrated both depth and breadth in their wireless communications
engineering knowledge.
4. Organizations can retain employees by investing in them. Supporting the IEEE WCP
credential and IEEE WCP credential holders demonstrates a real commitment to them; in
turn, WCP credential holders will demonstrate a commitment to you.
5. Your support for the IEEE WCP credential makes a powerful statement to customers
about the caliber of your people and your commitment to global best-practices. The
IEEE WCET certifcation is both transnational and vendor neutral; the required examination
that each IEEE WCP credential holder has passed refects the work requirements of
professionals around the globe.
Candidates Handbook
74
WWW.IEEE-WCET.ORG
Free Candidates Handbook
Free IEEE Wireles Communications
Professional newsletter
Free 1 hour Webinar on Preparing
for the WCET Exam
Vendor-neutral Trans-national
CanDIDaTEs HanDbOOk
A free 76 page guide with complete
description of the IEEE WCET
certifcation program is available upon
request.
Visit WWW.IEEE-WCET.ORG to request
your print or electronic copy.
PRaCTICE Exam
75 question practice exam is available
online. Visit WWW.IEEE-WCET.ORG
for more information.
WEbOk
Edited by Gustavo Giannattasio with
contributions by selected wireless
communications experts, a Guide to
the Wireless Engineering body of
knowledge (WEBOK) covers all the
specialty areas included in the WCET
examination.
www.wiley.com
+1 877 762 2974 (US)
+1 800 567 4797 (Canada)
+1 44 1243 843294 (world)
ISBN: 978-0-470-43366-9
Paper, 272pp, 2009
Price: US$69.95
(IEEE ComSoc members save 15% using
Promo Code: 18493)
OnlInE TuTORIals
WCET area 1: RF Engineering,
Propagation and antennas
WCET area 2: Wireless access
Technologies
WCET Area 3: Network and Service
architectures
For a complete list of tutorials visit
www.comsoc.org/tutorialsnow
TRaInInG
Learn more about WCET related
training events and providers at
www.ieee-wcet.org/training
Resources
This certifcation would enhance my qualifcations with new
clients. Tom Lavrisa, Principal Engineer, Ontario, Canada
I would make hiring decisions based, at least in part, on WCET
results. Vasu Subramanian, Manager, Alcatel-Lucent
The exam truly tested the broader understanding of the wireless
engineering profession ... Sivan Ramanchandran, Bangalore, India
The WCET certifcation greatly helps to communicate my
capabilities to others. Chris Barroso, San Diego, California
... We do not often come across a program which specifcally
addresses the full breadth of this technology nor the aspirations
of wireless engineers in gaining recognized and specifc industry
qualifcations through a program of study and learning outside of
their college or degree courses.
Ian Rose, BT Design, United Kingdom
Candidates Handbook
75
Ultimate Resource for
Wireless Engineering
Professionals
Price: us $69.95
To order: www.wiley.com
(IEEE Communications Society member
order with 15% discount with
Promo Code: 18493)
+1 877 762 2974 (US)
+1 800 567 4797 (Canada)
+1 44 1243 843294 (world)
ISBN: 978-0-470-43366-9
Paper, 272pp, 2009
LIST PRICE:
US$69.95 $83.95CAN 46.95 59.90
Recommended Resource for
IEEE WCET Certifcation Program
www.ieee-wcet.org
Information presented in this book refects the evolution of

wireless technologies, their impact on the profession, and
the industrys commonly accepted best practices. Organized
in seven main areas of expertise, A Guide to the Wireless
Engineering Body of Knowledge (WEBOK) enhances
readers understanding of:
Wireless access technologies
Network and service architecture
Network management and security
Radio frequency engineering, propagation, and antennas
Facilities infrastructure
Agreements, standards, policies, and regulations
Wireless engineering fundamentals
Complemented with a large number of references and
suggestions for further reading, the Wireless Engineering
Book of Knowledge (WEBOK) is an indispensable resource
for anyone in the wireless industry.
The references noted in the WEBOK
are extremely helpful since wireless is
still in its infancy (compared to other
engineering disciplines) ... this at least
gave me a starting off point when
fguring out where to focus my studies.
Elena Neira, IEEE WCP
New Jersey, USA

Candidates Handbook
76
WWW.IEEE-WCET.ORG
WCET CERTIFICATION PROGRAM
tel: +1 212 705 8900
fax: +1 212 705 8999
website: www. ieee-wcet.org
www.facebook.com/IEEEWCET
twitter.com/WCET
www.linkedin.com/groups
(look for WCET)

Wcet Certification

Uploaded by

Copyright:

Available Formats

Wcet Certification

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wcet Certification

Uploaded by

Copyright:

Available Formats

Wi reless Communi Cati on engi neeri ng teChnologi es (WCET)

Information presented in this book refects the evolution of

Wi reless Communi Cati on engi neeri ng teChnologi es (WCET)

You might also like