8ranch Cff|ce : West 8enga| 97/2, Pazra 8oad , kolkaLa W.8.

- 700026 l 1elelax - +91 33 24192883

8ranch Cff|ce : Uttar radesh 1/163, urmllapurl LxLenslon, Surendra nagar, lalzabad 8oad, Lucknow - u.. l h: +91 96219 77888
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure
Parad|gm Eng|neers & 6onsu|tants Pvt. Ltd.
A-3, Phase 1, Adityapur Industrial Area, Adityapur,
Jamshedpur 832109, Jharkhand, India
Phone: +91 657 237 1003
Fax : +91 657 237 3952
Email: [email protected]

Ref. : PECPL/OFFER/1112/3116
Date: 15.03.2012


To,
M/S Jindal Steel & Power Ltd.
Chhendipara Road, SH-63,
P.O. Nisa.
Angul 759130 ( Orissa )


Kind Attn.: Ansuman Kumar - Assistant Manager [ Steel Melting Shop ( E&I )]


Sub. : Techno-Commercial Offer for MLDB & EMLDB.


Dear Sir,

Kindly accept our sincere regards for your valuable inquiry. In inviting reference to above kindly find
our offer attached for your Plant.

Kindly find the detailed offer attached herewith. Hope you shall find the offer in line with your
requirement and we are sincerely looking forward to your valuable order. In case you require any further
clarification, kindly feel absolutely free to contact us.

Thanking you and assuring you for our best services,

Yours faithfully


For PARADIGM ENGINEERS & CONSULTANTS PVT.LTD.



Diptendu Patra

( 09614328514 )

uocumenL 8eference no. : LCL/Cll/11-12/3116

uaLe : 13.03.2012 age no. 2 of 11
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure






























Q Q@ @Q Q Q Q@ @ = = Q Q
@ @Q Q@ @@ @ Q Q@ @@ @
Q Q Q QQ QQ QQ Q@ @@ @
Q Q g g@ @ @ @ @ @g g@ @ @ @

uocumenL 8eference no. : LCL/Cll/11-12/3116

uaLe : 13.03.2012 age no. 3 of 11
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure
Technical Details

System Description

1. SYSTEM PARAMETER:-
AMBIENT TEMPERATURE 35DEG. C
MAXIMUM AMBIENT AIR TEMPERATURE 50DEG. C.

REFERENCE AMBIENT TEMPERATURE
FOR DESIGN
50DEG. C
2. MAIN SYSTEM 3PH.,4W,AC,50HZ.6%
RATED OPERATIONAL VOLTAGE 415V10% AC
NEUTRAL SYTEM SOLIDLY EARTHED
ALTITUDE <100 MTRS
HUMIDITY 90%
SYSTEM FAULT LEVEL 50KA FOR 1 SEC
AC CONTROL VOLTAGE 240V AC
3. CONSTRUCTION
TYPE OF SWITCHBOARD SINGLE FRONT
INSTALLATION IN DOOR
LOCATION FLOOR MOUNTED
MOUNTING LIFTING HOOK

ADDITIONAL BASE CHANNEL FOR
EMBEDMENT IN FOUNDATION
PROVIDED 75MM HEIGHT OF ISMC
FRONT & REAR ACCESS HINGED DOOR
FUTURE EXTENSION BOTH SIDE
DEGREE OF PROTECTION IP- 42
SHEET STEEL THICKNESS
SHEET THICKNESS FOR ,
2 MM THICK WITH BASE CHANNEL ISMC 75MM.
3.10 PAINTING
PROCEDURE
PRE-TREATMENT & POWDER COATING AS PER 10 TANK
PROCESS
MATERIAL POWDER COATED
SHADE INSIDE & OUTSIDE RAL 7035
3.11 NAME PLATE
NAME PLATE MATERIAL AL. ANODIZED
COLOUR OF LETTERING WHITE LETTERS OF BLACK BACKGROUND
SIZE OF LETTERING/NAME PLATE 25MM FOR MCC NAME & 5MM FOR FEEDER NAME

IDENTIFICATION OF EQUIPMENT
MOUNTED INSIDE PANEL
SELF- ADHESIVE STICKERS
4 BUSBARS/CONNECTIONS
4.1 MAIN BUSBARS
SYSTEM 3PH. 4W, R,Y,B,N

RATED SHORT TIME WITHSTAND
CURRENT
50KA
DURATION OF SHORT TIME RATING 1 SEC
RATED CURRENT AS REQUIRED
MATERIAL ALUMINIUM
INSULATION (EXCEPT AT JOINTS & TOP- HEAT SHRINKABLE SLEEVE

uocumenL 8eference no. : LCL/Cll/11-12/3116

uaLe : 13.03.2012 age no. 4 of 11
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure
OFFS)

LOCATION/ARRANGEMENT OF MAIN
BUSBARS
IN BUSBAR CHAMBER AT TOP/HORIZONTAL
COLOUR COADING R / Y / B / BL
4.2 NEUTRAL BUSBAR
NEUTRAL BUSBARS SIZE AS REQUIRED (HALF OF THE PHASE BUSBARS)
MATERIAL ALUMINIUM

RATED SHORT TIME WITHSTAND
CURRENT
50KA
DURATION OF SHORT TIME RATING 1 SEC

LOCATION/ARRANGEMENT OF MAIN
BUSBARS
ALONG BUSBAR
COLOUR COADING BLACK
4.3 EARTH BUSBAR
EARTH BUSBARS SIZE AS REQUIRED
MATERIAL GI
4.4 VERTICAL BUSBAR, IF APPLICABLE
SYSTEM 3PH. 4W, R,Y,B,N
RATED CURRENT AS PER CONNECTED LOAD

RATED SHORT TIME WITHSTAND
CURRENT
50KA FOR 1 SEC
MATERIAL ALUMINIUM
5.0 WIRING
5.1 POWER CIRCUIT
INSULATION GRADE 660V/1100V AC
SIZE AS PER FEEDER RATING
COLOUR COADING FOR IDENTIFICATION
COLOUR SLEEVES AT TERMINATION FOR HIGHER
RATING FDRS & COLOUR CABLE FOR SMALL RATING
FDRS.
TERMINATION WITH CRIMPING TYPE COPPER LUGS
5.2 AUXILIARY CIRCUIT (PVC INSULATED CU. STRANDED)
INSULATION GRADE 1100V AC
5.3 SIZE OF WIRE (CONTROL & AUXILIARY CIRCUITS)
CT CIRCUIT 2.5SQ.MM (RED-R PH, YELLOW-Y PH, BLUE-B PH.)
CONTROL 1.5SQ.MM (RED-R PH, YELLOW-Y PH, BLUE-B PH.)
AUXILIARY BUSWIRE 1.5SQ.MM (PHASE-RED, NEUTRAL-BLACK)
CIRCUIT IDENTIFICATION
PRINTED FERRULES PVC SLEEVE AT TERMINATIONS
END (AS PER
CONTROL CIRCUIT.)

uocumenL 8eference no. : LCL/Cll/11-12/3116

uaLe : 13.03.2012 age no. 3 of 11
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure
Bill of Materials

EMLDB
SL.NO DESCRIPTION QTY MAKE
A 630A Main Incomer 2 Nos
1
630 A 4P, 50KA, Microprocessor Base MCCB with O/L, S/C, E/F Protection &
RHOM with 1 C/O Aux. Contact
2 Schneider
2 630A, TPN Contactor with 2NO+2NC Aux. Contact Coil voltage - 240V AC 2 Schneider
3 SIF-96, 0- 600A, Digital Ammeter with CTR-600/5 A 2 Conzerv
4 SIF-96, 0-500V Digital Voltmeter 2 Conzerv
5 Ammeter Selector Switch 2 Recom
6 Voltmeter Selector Switch 2 Recom
7 600/5A, 15VA, Class -1 Current Transformer 6 Kappa
8 LED Type R / Y / B Phase Indication Lamp , 240V AC 6 Schneider
9 LED Type ON / OFF Indication Lamp , 240V AC 4 Schneider
10 6 A,10KA, SP MCB 14 Schneider
11 Neutral Link 4 Reputed
12 Caselt Key for Mechanical Interlock 1 Reputed
B Control Feeder 1 No
1
415V/240V AC,1KVA Resin Cast Control Transformer with +2.5%, +5% Primary
Taps
1 Gupta
2 6A,10KA,DP MCB 1 Schneider
3 10A,10KA,DP MCB 1 Schneider
4 LED Type Indication Lamp 1 Schneider
5 6A,10KA,SPN,MCB 1 Schneider
C Bus bar and Earth Bus
Bus bar with heat shrinkable PVC sleeves supported on Glass Epoxy Bus bar support
Phase : 1 No x 75 x 10 mm per phase, Al
Neutral: 1 No. X 75 x 6 mm, Al
Control Bus : 2 Nos x 15 x 3 mm, Copper
Earth Bus : 1 No. x 50 x 6 mm, GI
D OUTGOING FEEDERS 8 Nos
D1 125A Power Supply Feeder 8 Nos
1
125A 4P 50 KA Microprocessor Base MCCB O/L, S/C, E/F Protection &
RHOM, 1C/O Aux. Contact
8 Schneider
2 SIF-96, 0- 125A, Digital Ammeter with CTR-125/5 A 8 Conzerv
3 Ammeter Selector Switch 8 Recom
4 125/5A, 5VA, Class - 1 Current Transformer 24 Kappa
5 LED Type ON Indication Lamp. 8 Schneider
6 6 A,10KA,SP MCB 8 Schneider
7 Neutral Link 8 Reputed
Tentative Panel Dimension : (H) 2375 mm x ( L/W ) 3000 mm x (D) 600 mm

uocumenL 8eference no. : LCL/Cll/11-12/3116

uaLe : 13.03.2012 age no. 6 of 11
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure

MLDB - 1
SL.NO DESCRIPTION QTY MAKE
A 800A Main Incomer 2 Nos
1
800 A 4P, 50KA, Microprocessor Base MCCB with O/L, S/C, E/F Protection &
RHOM with 1 C/O Aux. Contact
2 Schneider
2 800A, TPN Contactor with 2NO+2NC Aux.Contact Coil voltage - 240V AC 2 Schneider
3 SIF-96, 0- 800A, Digital Ammeter with CTR-800/5 A 2 Conzerv
4 SIF-96, 0-500V Digital Voltmeter 2 Conzerv
5 Ammeter Selector Switch 2 Recom
6 Voltmeter Selector Switch 2 Recom
7 800/5A, 15VA, Class -1 Current Transformer 6 Kappa
8 LED Type R / Y / B Phase Indication Lamp , 240V AC 6 Schneider
9 LED Type ON / OFF Indication Lamp , 240V AC 4 Schneider
10 6 A,10KA, SP MCB 14 Schneider
11 Neutral Link 4 Reputed
12 Caselt Key for Mechanical Interlock 1 Reputed
B Control Feeder 1 No
1
415V/240V AC,1KVA Resin Cast Control Transformer with +2.5%, +5% Primary
Taps
1 Gupta
2 6A,10KA,DP MCB 1 Schneider
3 10A,10KA,DP MCB 1 Schneider
4 LED Type Indication Lamp 1 Schneider
5 6A,10KA,SPN,MCB 1 Schneider
C Bus bar and Earth Bus
Bus bar with heat shrinkable PVC sleeves supported on Glass Epoxy Bus bar support
Phase : 2 Nos x 75 x 10 mm per phase, Al
Neutral: 1 No. X 75 x 10 mm, Al
Control Bus : 2 Nos x 15 x 3 mm, Copper
Earth Bus : 1 No. x 50 x 6 mm, GI
D OUTGOING FEEDERS 15 Nos
D1 125A Power Supply Feeder 15 Nos
1
125A 4P 50 KA Microprocessor Base MCCB O/L, S/C, E/F Protection &
RHOM, 1C/O Aux. Contact
15 Schneider
2 SIF-96, 0- 125A, Digital Ammeter with CTR-125/5 A 15 Conzerv
3 Ammeter Selector Switch 15 Recom
4 125/5A, 5VA, Class - 1 Current Transformer 45 Kappa
5 LED Type ON Indication Lamp. 15 Schneider
6 6 A,10KA,SP MCB 15 Schneider
7 Neutral Link 15 Reputed
Tentative Panel Dimension : (H) 2375 mm x ( L/W ) 4100 mm x (D) 600 mm

uocumenL 8eference no. : LCL/Cll/11-12/3116

uaLe : 13.03.2012 age no. 7 of 11
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure



























Q Q@ @Q Q Q Q@ @ = = g g
Q Qq qq q@ @q q q qj j q qQ Qg g g g@ @Q Q
@ @g gq q Q QQ Qj jq q@ @ @ @j jQ Q( (

uocumenL 8eference no. : LCL/Cll/11-12/3116

uaLe : 13.03.2012 age no. 8 of 11
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure
Scope of Supply & Services


8cope of 8upp|y
1. 3upp|y ol Pare|s as per proposed 80V
2. 0ocurerls: 2 3els (0re 3el |r lard Copy & 0re 3el |r 3ollcopy)
8cope of 8erv|ce
1. 0es|gr & 3ysler erg|reer|rg ol Pare|s as per proposed 80V.
2. Tesl|rg & lrspecl|or al our erd oelore d|spalcr
L|st of Exc|us|on
1. PoWer & Corlro| Cao|e lor F|e|d.
2. 3upp|y, Lay|rg & Terr|ral|or ol ary F|e|d Cao|e or Cao|e 3credu||rg.
3. 3lorage ol Pare|.
1. 3upp|y & Lay|rg ol ary Cordu|l.
5. Ary F|e|d lrslrurerl
. Fu|| Load Tesl al Faclory / 0eslrucl|ve Tesl
Z Ary lype ol Erecl|or Acl|v|ly

uocumenL 8eference no. : LCL/Cll/11-12/3116

uaLe : 13.03.2012 age no. 9 of 11
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure




































Q Q@ @Q Q Q Q@ @ = = Q Q
Q Qq q@ @@ @q qQ Qq qj jg g Q Qj jj jq qQ Q

uocumenL 8eference no. : LCL/Cll/11-12/3116

uaLe : 13.03.2012 age no. 10 of 11
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure
Commercial Terms & Conditions
Price Bid

Sl.
No.
Description
UNIT PRICE
( INR )
Qty
(Sets)
AMOUNT
(INR)
Price Schedule and Break-up
1. Supply of EMLDB 6,65,000.00 5 Nos 33,25,000.00
2. Supply of MLDB 10,55,000.00 5 Nos 52,75,000.00
Total Package Price 86,00,000.00





Commercial Terms & Conditions

1 Prices Prices quoted are Ex-Works Basis.

2 Taxes & Duties Sales Tax (Central or State), Excise, Octroi and / or any other levy as applicable at the
time of delivery shall be charged extra.
Excise Duty 10.30 %
CST 2 % Against Form `C`
Service Tax 10.30 % (If Applicable).
3 P & F 2.5% Extra on Basic Prices.

4 Freight Charges Freight charges to be borne by Customer.

5 Transit
Insurance
Transit Insurance shall be in Customers Scope. In case the Insurance to be arranged
by us, an additional amount @ 0.1% shall be charged on total invoice value.

6 Payment Terms 20% Advance along with P.O. and balance 80% along-with all taxes and duties against
Proforma Invoice after inspection at our works but before dispatch.

7 Validity The quotation is valid for acceptance 30 days.

8 Delivery 14 - 15 Weeks Ex-works from the date of approved drawings.

uocumenL 8eference no. : LCL/Cll/11-12/3116

uaLe : 13.03.2012 age no. 11 of 11
www.parad|gmeng|neers.com
An ISC 9001-2008 Cert|f|ed Crgan|sat|on

aradlgm
lnLegraLlng luLure

9 Force Majeure Every effort will be made to deliver the goods within the scheduled deliver period, but
we take no responsibility for any delay occasioned by causes beyond our control
known as Force Majeure. Delayed delivery will not be the reasons for the cancellation
of the contract. NO claim for refund of deposits / advance or damages will be
entertained.
10 Inspection Inspection of goods will be arranged at our Jamshedpur Works at Purchasers Cost
failing that our guarantee before dispatch of goods shall have to be accepted.

11 Warranty All items supplied by us carry manufacturing warranty for their satisfactory working for
18 months from the date of dispatch / 12 months from the date of commissioning
whichever is earlier.
12 Insurance /
Indemnity /
Guarantee
Unless instructed otherwise, the goods will be dispatched at buyers risk. We however,
offer our indemnity guarantee service by which we ensure satisfactory working of the
instruments at the destination after delivery. For this service an additional amount of
3 % (6% for the glass parts) is charged. Any breakage or loss must be intimated to us
within 7 days from the date of receipt of goods, otherwise we shall not entertain claim.

13 Jurisdiction All disputes relating to the above contract are subject to East Singbhum Jurisdiction.
14 Order to be
placed on
M/s. Paradigm Engineers & Consultants Pvt. Ltd.
A-3 ,Phase-1, Adityapur Industrial Estate,
Adityapur, Jamshedpur 832 109.