Axminster 02 - Industrial Machines - p85-p108

Industrial Panel Saws
Axminster Industrial Series P30/2200 Panel Saws

Not every trade workshop needs a large panel saw dominating the workspace, but a compact, fully featured saw is a tempting alternative. The Axminster Industrial Series P30/2200 does just that, having a robustly constructed chassis in heavy gauge steel and generous grey cast iron table. This is a sturdy chassis that gives stability and vibration free running. The 305mm main blade gives a maximum depth of cut of 90mm. The saw blade is carried on a heavy duty spindle ensuring accurate blade control and is driven by a multi V type belt which ensures quiet operation with high reliability. A 120mm scoring blade is standard, easily adjusted or withdrawn below the table by simple hand controls. There are two options available; 230V 1ph or 415V 3ph, both are 2.2kW. These high efficiency motors will give more than ample power for the toughest of tasks, they are cool running and have a brake for safe stopping. A 2,200mm sliding table is a standard fitting, very smooth running, carries a sizeable crosscut table and includes a telescopic mitre fence complete with length stops. The crosscut table is easily removed if required, saving space when not needed. Rear outfeed and right hand support tables are included, giving a sizeable working area for sheet work. The cast iron handwheel controls are smooth to operate and have retracting handles to save them being knocked. Efficient dust control is via a direct dust chute and ensures clean operating when connected to a suitable extraction system. This saw has all you could require in a small but busy workshop, or in a school preparation area. The main saw blade is not supplied, please make your selection from the blades listed or from our Blades Section. (N.B. The Overhead Crown Guard Kit is to be recommended for increased safety and more efficient dust collection).
Available as 2.2kW 230V 1ph or 415V 3ph Powerful, heavyweight but compact dimensions Extra large rigid cast iron table 2,200 x 360mm fully featured sliding table Crosscut frame fully supported by a heavy duty telescopic arm Rear outfeed and right hand support tables Rigid, cast iron rip fence bracket Uses 305mm saw blades, wide range available 120mm scoring blade, fully adjustable for depth and position
Model Rating Power Blade Dia/Bore Blade Tilt Max Depth of Cut @ 45 Max Depth of Cut @ 90 Table Size Table Height Sliding Table Size Dust Extraction Outlet Overall L x W x H Weight
Axminster Ind P30/2200 Industrial 2.2kW (230V 1ph or 415V 3ph) 305mm/30mm 0-45 64mm 90mm 896 x 548mm 915mm 2,200 x 360mm 120mm & 60mm 2,326 x1,350 x 1,100mm 480kg
Overhead Crown Guard Kit

This Overhead Crown Guard is an accessory to fit the Axminster P30/2200 model. It offers much improved protection for the user as well as much superior dust collection and ease of use of the saw. The HSE recommend the use of guards of this design due to the greater safety for the user, it is simple to fit and is a great enhancement.
Inc.vat Ex.vat P30/2200 230V 1ph 3,559.50 2,966.25 P30/2200 415V 3ph 3,459.50 2,882.92 Saw Blade 305 x 3.2 x 30mm x 48T 84.95 70.79 Saw Blade 305 x 3.2 x 30mm x 72T 118.96 99.13 Saw Blade 305 x 3.2 x 30mm x 96T 110.50 92.08
Code 953440 953441 951525 951526 951527
Overhead Crown Guard kit
Inc.vat 474.50
Ex.vat 395.42
Code 211562
Order online www.axminster.co.uk/industrial
85

Precision ground cast iron main table 2,500 x 360mm or 3,200 x 360mm sliding tables with large panel support table Takes 305-355 main saw blades Separately powered 120mm scoring blade Outfeed and side extension tables standard Cast iron rip fence with fine adjustment
Axminster Industrial Series P305/2500 & P305/3200 Panel Saw

This is a great range of mid sized panel saws designed for ease of use and the high accuracy cutting of board materials of all types. With a choice of 2,500mm or 3,200mm x 360mm sliding tables which are robust and smooth running, these giving a 2,400mm or 3,100mm capacity before the blade. A crosscut frame supports the larger boards and a mitre fence with a telescopic extension and two flip-over length stops is fitted. Unusually, offering a choice of main blade size between 305-355mm giving a maximum depth of cut at 115mm at 90. A 120mm scoring blade powered by a separate motor is standard, giving the finest of cuts on faced materials. The main table is a rigid, precision ground, cast iron surface of 548 x 896mm supported by a welded steel chassis, powder coated for long term protection. A cast iron rip fence body with fine width adjustment is complemented by a long, alloy extrusion fence arm, all running on a solid 40mm chromed steel rail. Rear out feed and side extension tables are standard, along with a work clamp, handle and edge shoe for the sliding table. We do recommend the use of the optional Overhead Crown Guard when using the larger 355mm blades. Please choose your main saw blade from the selection below. A fine range of modern saws, a pleasure to use in any workshop. Model Rating Power Blade Dia/Bore Blade Tilt Max Depth of Cut @ 45 Max Depth of Cut @ 90 Max Width of Cut with Fence Max Ripping Width Table Size Table Height Sliding Table Size Dust Extraction Outlet Weight Model Rating Power Blade Dia/Bore Blade Tilt Max Depth of Cut @ 45 Max Depth of Cut @ 90 Max Width of Cut with Fence Max Ripping Width Table Size Table Height Sliding Table Size Dust Extraction Outlet Weight P305/2500 Industrial 3.75kW (230V 1ph, 415V 3ph) 305-355mm, 30mm 0-45 degrees 62mm (70mm max) 90mm (115mm max) 1,300mm 1,300mm 548 x 896mm 915mm 2500 x 360mm 120mm & 60mm 573kg P305/3200 Industrial 3.75kW (230V 1ph, 415V 3ph) 305-355mm, 30mm 0-45 degrees 62mm (70mm max) 90mm (115mm max) 1,300mm 1,300mm 548 x 896mm 915mm 3200 x 360mm 120mm & 60mm 600kg
Overhead Crown Guard Kit

Improved user protection Superior dust collection Better visibility during cutting This Overhead Crown Guard is an accessory to fit the Axminster SS-1600MH, P305/2500 and P305/3200 models. It offers much improved protection for the user as well as superior dust collection. The HSE recommend the use of guards of this design due to the greater safety for the user and we would recommend the use of these guards when using blades greater than 305mm in diameter.
P305/2500 230V 1ph P305/2500 415V 3ph P305/3200 230V 1ph P305/3200 415V 3ph Saw Blade 305 x 3.2 x 30mm x 48T Saw Blade 305 x 3.2 x 30mm x 72T Saw Blade 305 x 3.2 x 30mm x 96T Saw Blade 355 x 3.5 x 30mm 54T Saw Blade 355 x 3.5 x 30mm 72T Saw Blade 355 x 3.5 x 30mm 108T
Inc.vat 4,369.50 4,249.50 4,759.50 4,629.50 84.95 118.96 110.50 105.50 135.50 139.00
Ex.vat 3,641.25 3,541.25 3,966.25 3,857.92 70.79 99.13 92.08 87.92 112.92 115.83
Code 953442 211564 953443 211566 951525 951526 951527 951529 951530 951531
Overhead Crown Guard kit
Inc.vat 474.50
Ex.vat 395.42
Code 211562
86
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Order freephone 0800 371822

Powered blade height and tilt with digital read-out Precision ground main table Smooth running 3,200 x 395mm sliding table Takes 355-400mm main saw blades (not supplied) Separately powered 120mm scoring blade Large panel support frame Outfeed and side extension tables standard Cast iron rip fence with fine adjustment Work clamp, edge shoe and mitre gauge standard
Axminster Industrial Series D405A/3200 Panel Saw

This is a new design of large panel saw featuring a 3,200mm long sliding table of 395mm width with a four track bearing system for extra stability and smooth running. This sliding table is easily and completely adjustable to make sure it runs true to the blade, so complete accuracy is guaranteed. Able to crosscut up to 3,100mm and rip cut up to 1,300mm against the fence this saw has prodigious capacities for all your board work. Powered by a 5.5kW 415V motor for the main blade and a separate 0.75kW motor for the scoring blade this machine is very well powered as standard. The blade rise and fall is motorised, as is the blade tilt. A digital read-out enables accurate blade height and tilt setting every time. A very generously sized cast iron main table with its outfeed and side support tables gives a large working area, unimpeded by the overhead saw blade guard system. The exceptionally rigid cast iron rip fence holder features a micro adjustment system and a rigid alloy extrusion rail, all mounted on a solid chromed bar and held by cam locks. An optional fence fitted with a Digital Read-Out (DRO) can be fitted for improved accuracy of setting between the rip fence and blade.
Crosscut table
As you would expect, the chassis is of heavy welded steel construction and powder coated for long term protection. A panel saw is the machine at the heart of any professional workshop and this saw would win its place in all but the largest workshop. Supplied complete with 3,200 x 395mm sliding table, scoring blade, overhead crown guard, crosscut fence, mitre fence and work hold down clamp. Not supplied with a main blade, please choose from our Axcaliber Premium Blades selection.
Work hold down clamp
Edge shoe
Model Rating Power Blade Dia/Bore Blade Tilt Max Depth of Cut @ 45 Max Depth of Cut @ 90 Table Size Table Height Sliding Table Size Dust Extraction Outlet Weight
D405A Industrial 5.5kW (415V 3ph) 355-400mm, 30mm 0-45 70 - 84mm max 105-127mm max 548 x 896mm 915mm 3,200 x 395mm 120mm & 60mm 859kg
Inc.vat Ex.vat D405A 415V 3ph 7,259.50 6,049.58 Saw Blade 355 x 3.5 x 30mm 54T 105.50 87.92 Saw Blade 355 x 3.5 x 30mm 72T 135.50 112.92 Saw Blade 355 x 3.5 x 30mm 108T 139.00 115.83 Saw Blade 400 x 3.8 x 30mm 36T 95.99 79.99 Saw Blade 400 x 3.8 x 30mm 60T 127.50 106.25 Saw Blade 400 x 3.8 x 30mm 84T 169.50 141.25 Saw Blade 400 x 3.8 x 30mm 120T 171.00 142.50
Code 953444 951529 951530 951531 951532 951533 951534 951535
87
Industrial Vertical Panel Saws

Safety Speed Cut C4 Panel Saw
The C4 vertical panel saw is a useful addition to any small or medium workshop where sheet material is regularly processed. Vertical operation makes handling of the sheets much easier as well as saving valuable floor space. The saw can be secured permanently to a wall or moved around with the aid of the optional wheels and either the fixed or the folding stand. It can also be transported in the back of a van for site use. The saw unit with its 44.5mm depth of cut and 1,600W motor is fixed to a mounting plate which slides up and down the two guide bars, supported by a spring recoil device. Vertical cuts are made by positioning the sheet in the correct position on the frame and moving the saw blade down through the sheet; horizontal cuts are made by rotating the saw unit through 90, locking it in the correct vertical position and moving the sheet through the blade. Rollers on the lower rail ease the passage of the sheet through the saw and there are wheeled extensions available for the bottom rail to allow 2,440 x 1,220mm(8 x 4) sheets to be safely processed. The saw comes fitted with a mid-way fence which makes the handling of narrower width boards much more convenient. The two horizontal timber supports on the mid-way fence are secured in place with quick release cam clamps which allow the supports to be removed in a few seconds when full depth sheets are to be cut. The mid-way fence is fitted with a precision stop for accurate repeat length cutting. Other accessories available are: (a) a sliding dust extraction kit with a 6.5m hose which slides over the rollers at the top of the machine as the saw moves up and down, (b) a multiposition length stop which allows for up to eight pre-set lengths to be set and (c) a hold down bar with support fingers and non marring rollers for use when cutting thin materials such as Perspex. A package consisting of the basic saw with the mid-way fence together with the fixed stand, wheel set and sliding dust kit is available at a small cost saving over the individual items. Please note that a fine toothed blade is now supplied as standard with the saw. An additional blade suitable for cutting non-ferrous materials is also available.
Picture shows the mid-way fence with support boards fitted, these can be removed very quickly if required. Note the stop and scale that allows for quick and precise setting to be made.
1,600W industrial duty motor Up to 44.5mm depth of cut Counter-balanced saw carriage for ease of cutting 2,450 x 1,270mm(8 x 4)sheet cutting capacity Optional wheels and fixed or folding stands available Rollers on lower guide rails to ease horizontal cutting Optional wide board extensions and thin material pressure rollers C4 package supplied with midway fence for handling narrow boards, dust extraction kit, fixed stand and wheel kit
Model Rating Power Blade Dia/Bore Max Depth of Cut Max Crosscut Max Ripping Width Overall L x W x H Weight
C4 Industrial 1,600W 205mm/5/8 44.5mm 1,270mm 2,450mm 1,525 x 915 x 1,900mm 67kg
Inc.vat Ex.vat C4 Panel Saw 240V 1,649.50 1,374.58 C4 Saw Package 240V 1,859.50 1,549.58 205 x 1.8 x 16mm 64T Wood 19.45 16.21 205 x 2 x 16mm 64T Non Ferrous Metal 22.85 19.04
Code 110067 340134 950684 950685
Safety Speed Cut H4 & H5 Panel Saws

The H4 and H5 vertical panel saws are a useful addition to any small or medium workshop where sheet material is regularly processed. Vertical operation makes handling of the sheets much easier as well as saving valuable floor space. The saw can be secured permanently to a wall or moved around with the aid of the optional wheels and either the fixed or the folding stand. It can also be transported in the back of a van for site use. The saw unit with its 44.5mm depth of cut and 1,600W motor is fixed to a mounting plate which slides up and down the two guide bars, supported by a spring recoil device. Vertical cuts are made by positioning the sheet in the correct position on the frame and moving the saw blade down through the sheet; horizontal cuts are made by rotating the saw unit through 90, locking it in the correct vertical position and moving the sheet through the blade. Rollers on the lower rail ease the passage of the sheet through the saw and there are wheeled extensions available for the bottom rail to allow 2,440 x 1,270mm (8 x 4) sheets to be safely processed. The saw comes fitted with a mid-way fence which makes the handling of narrower width boards much more convenient. The two horizontal timber supports on the mid-way fence are secured in place with quick release cam clamps which allow the supports to be removed in a few seconds when full depth sheets are to be cut. The mid-way fence is fitted with a precision stop for accurate repeat length cutting. Other accessories available are: (a) a sliding dust extraction kit with a 6.5 metre hose which slides over the rollers at the top of the machine as the saw moves up and down, (b) a multiposition length stop which allows for up to eight pre-set lengths to be set and (c) a hold down bar with support fingers and non marring rollers for use when cutting thin materials such as Perspex. Please note that a fine toothed blade is now supplied as standard with the saw. An additional blade suitable for cutting non-ferrous materials is also available. Model Rating Power Blade Dia/Bore Max Depth of Cut Max Crosscut Max Ripping Width Overall L x W x H Weight H4 Industrial 1,600W 205mm/5/8 44.5mm 1,270mm Unlimited 3,050 x 915 x 1,905mm 111kg Model Rating Power Blade Dia/Bore Max Depth of Cut Max Crosscut Max Ripping Width Overall L x W x H Weight H5 Industrial 1,600W 205mm/5/8 44.5mm 1,625mm Unlimited 3,050 x 915 x 2,286mm 135kg
1,600W, 13A industrial duty motor Zinc plated 44.5mm steel guide tubes Four Nylatron roller bearing systems Adjustable vertical and horizontal rulers Thin material pressure guard as optional accessory Spring loaded counter balance system Injection-moulded plastic material rollers Quick change from vertical to horizontal cutting
H4 Vertical Panel Saw 240V
Inc.vat Ex.vat 2,199.50 1,832.92
Code 500461
H5 Vertical Panel Saw 240V
Inc.vat Ex.vat 2,519.50 2,099.58
Code 500464
88
Vertical Panel Saws Accessories
Sliding Dust kit for C4, H4 & H5 Panel Saws

Allows you to efficiently remove most airborne dust particles and maintain a safer, cleaner working environment. Requires the connection of a suitable dust extractor. Kits contains, hose, rollers, dust tube and elbow. Can be fitted to the C4, H4 and H5 panel saws.
Extension Set for C4, H4 & H5 Panel Saws

Ex.vat 142.49 Code 110070
Extensions come as a pair and adds 20 to each side of the material handling roller fence allowing for easy processing of larger panels. They enable full sized panel saws to easily cut panels larger than 10 in length, quickly, accurately and safely, with just a single operator. Can be fitted to the C4, H4 and H5 panel saws.
Dust kit
Inc.vat 170.99
Extension Set
Inc.vat 142.00
Ex.vat 118.33
Code 500459
Wheel Set for C4, H4 & H5 Panel Saws

Allows the panel saw to be moved easily when in the completely upright position. When the panel saw is resting on the stand, wheels are disengaged and the machine will not move. Can be fitted to the C4, H4 and H5 panel saws.
Folding Stand for C4 Panel Saw

The Folding Stand allows the panel saw to free stand anywhere in your workshop. It will fold back out of the way, allowing for easier transporting or storage of the panel saw.
Wheel Set
Inc.vat 43.25
Ex.vat 36.04
Code 110072
Folding Stand (C4 Only)
Inc.vat 128.50
Ex.vat 107.08
Code 030011
Quick Stops for C4, H4 & H5 Panel Saws

The quick stop aids with easily adjustable repeat cutting. Using an 8 long heavy extrusion with an embedded scale and an adjustable machined aluminum stop block.
Quick Stop for C4 Quick Stop for H4 & H5
Inc.vat 172.96 207.50
Ex.vat 144.13 172.92
Code 341174 500466
Fixed Stand for C4, H4 & H5 Panel Saws

The Fixed Stand allows the panel saw to free stand anywhere in your workshop. The tripod design minimizes the effects of the most uneven floor while holding your panel saw at the best angle for stable material handling and cutting. Can be fitted to the C4, H4 and H5 panel saws.
Midway Fences for C4, H4 & H5 Panel Saws

Brings your small panel work to waist height. Reduce back fatigue while cutting quantities of small panels on your machine. Uses removable fence supports on both the left and right of the machine centre. Included is a stop block riding over recessed gauges for setting stops for repeat cuts.
Hold Down Bar for C4, H4 & H5 Panel Saws

The Hold Down Bar keeps thin and flexible materials firmly against the panel saws frame for accurate, easy and safe cutting. The Hold Down Bar features spring steel fingers with non-marring rollers to reduce vibration and flex while cutting thin materials.
Fixed Stand
Inc.vat 95.95
Ex.vat 79.96
Code 110074
Midway Fence for C4 Midway Fence for H4 & H5
Inc.vat 352.50 403.50
Ex.vat 293.75 336.25
Code 110069 500467
Hold Down Bar for C4 & H4 Hold Down Bar for H5
Inc.vat 157.00 166.00
Ex.vat 130.83 138.33
Code 500462 500465
89
Industrial Rip Saws
Cast iron main table and folding sliding table Mechanically braked induction motor, choice of 1 or 3ph Rigid rip fence with cam action clamps Blade controls are smooth and precise, with position locks Main switchgear has overload and fused protection Emergency Stop button with lock function
Axminster Industrial Series TSCE-12R 305mm Table Saw

This is a small industrial quality circular saw, primarily designed for rip work, compact in size but of very robust construction. Based around an all welded steel base with a heavy, finely ground, all cast iron table and amply powered by a mechanically braked induction motor. A small sliding table of cast iron running on an adjustable bearing system, complete with a simple mitre fence and a sliding support arm is a standard fitting, ideal for small boards or panels. This easily folds down out of the way if not required, saving space in the workshop. An extremely rigid rip fence with cam action clamps, comprising a cast iron housing with an extruded alloy fence rail giving a max capacity of 620mm to the blade is also standard. The power/saw head is mounted in a very rigid cast iron frame, the adjustments for rise and fall and blade tilt are via large, chromed steel hand wheels which are exceptionally smooth in operation. The handwheels also have in-built locking facilities. Dust extraction is via a rear mounted 100mm port and a connection hose to the crown guard. A conveniently mounted switch box has a locking emergency stop button and features overload protection and individual phase fused protection. This saw is simply perfect for the small general woodworking workshop, school technicians or maintenance departments requiring a simple, robust dimension saw. N.B.16A supply required. Model Rating Power Blade Dia/Bore Blade Tilt Max Depth of Cut @ 45 Max Depth of Cut @ 90 Max Width of Cut with Fence Table Size Table Height Sliding Table Size Dust Extraction Outlet Overall L x W x H Weight TSCE-12R Industrial 2.2kW (230V) - 3.75kW (415V) 305mm/30mm 0 - 45 72mm 102mm 620mm 866 x 800mm 860mm 354 x 650mm 100mm + 60mm 650 x 850 x 900mm 287kg
Inc.vat Ex.vat TSCE-12R 305mm Table Saw 230V 2,149.50 1,791.25 TSCE-12R 305mm Table Saw 415V 2,179.50 1,816.25 Saw Blade 305 x 3.2 x 30mm x 28T 63.00 52.50 Saw Blade 305 x 3.2 x 30mm x 48T 84.95 70.79 Saw Blade 305 x 3.2 x 30mm x 72T 118.96 99.13 Saw Blade 305 x 3.2 x 30mm x 96T 110.50 92.08
Code 700158 600807 951524 951525 951526 951527
Smooth & precise hand wheels with locking facility
Sliding table folds away when not in use
90
Industrial Rip Saws
Substantial cast iron table, ground for accuracy Mechanically braked high efficiency induction motor Rigid rip fence with cam action clamps Blade rise and fall plus tilt via smooth acting hand wheels Full overload protection and emergency stop switch provision Additional options available
Axminster Industrial Series TSCE-400R-1 400mm Table Saw

This saw is a larger version of our TSCE-12R table saw, having the same basic design but remaining quite compact in size and extremely robust. Available as a basic rip saw model, this machine is constructed around a heavy gauge welded steel chassis with a heavily braced cast iron table of very generous proportions. The 5.6kW 415V 3ph motor drives the 400mm blade giving ample power even at the maximum 130mm depth of cut. There is a 680mm width of cut from blade to fence, the rip fence being a heavy cast iron base running on a solid steel bar with fine width adjustment and a deep section alloy extrusion sliding fence rail. Fitted with cam lock clamps, this fence will remain in place even under arduous cutting conditions. A heavy duty cast iron mitre fence running in a T slot is provided. There is a full overhead crown guard provided for full blade protection, complete with excellent provision for dust extraction. The saw motor/arbor frame is a massive casting providing rigidity and vibration damping qualities, all adjustments to the blade height and tilt being made by the extra large cast iron hand wheels. The hand wheels also have built in locking facilities to prevent movement of the blade from the settings made, and are exceptionally smooth in operation. A conveniently situated switch box has a locking emergency stop button, features overload protection and individual phase fuses. A separate foot operated emergency stop switch is conveniently situated to provide extra operator safety. Supplied with a 400mm diameter, 28T rip blade. An ideal saw for producing large frames for roofing, joists, gate posts or processing other heavy timbers. There are two extra options that can be added to the basic saw: 1. A large right hand extension table, complete with a longer rip fence rail and extension to the overheard crown guard. This will give up to 1175mm width of cut from blade to fence. There is also a lower storage platform for materials etc. 2. A simple sliding table kit, comprising an alloy extrusion sliding table, and a cross cut table with a telescopic support leg. This is easy to fit, fully adjustable and will give 1360mm before the blade. It also has a mitre fence rail with a flip over length stop.
Rating Industrial Power 5.6kW Max Depth of Cut @ 45 93mm Max Depth of Cut @ 90 130mm Max Ripping Width 680mm Table Size 1,125 x 900mm Table Height 850mm Dust Extraction Outlet Cabinet - 150mm , Crown guard - 100mm Weight 430kg
Inc.vat Ex.vat TSCE-400R-1 Table Saw 415V 3,689.50 3,074.58 Right Hand Extension Table 547.00 455.83 1500mm Sliding Table 410.50 342.08 Cross Cut Table 364.50 303.75 Sliding Table & Crosscut Table Kit 736.00 613.33 Saw Blade 400 x 3.8 x 30mm 36T 95.99 79.99 Saw Blade 400 x 3.8 x 30mm 60T 127.50 106.25 Saw Blade 400 x 3.8 x 30mm 84T 169.50 141.25 Saw Blade 400 x 3.8 x 30mm 120T 171.00 142.50
Code 210696 210689 210692 210691 718421 951532 951533 951534 951535
Right hand extension table kit Sliding table and crosscut table kit
91
355mm
Rip Saw Blade
355mm Dia 30mm Bore 28 Teeth 3.5mm Kerf ATB
400mm
Rip Saw Blade
Inc.vat 73.96
Ex.vat 61.63
Code 951528
Inc.vat 95.99
Ex.vat 79.99
Code 951532
Fine grain Tungsten Carbide Tipped blades for the professional user featuring resin filled laser cut slots that dampen vibration.
The Premium range is from 254mm to 400mm and is aimed very much at the professional and industrial user. Basically manufactured in the same way, each plate is ground to an exceptional standard of accuracy, having a blade run-out of no more than 0.10mm on the very largest size. The TCT tips are made from Luxembourg Carbide, known for its consistent quality, CNC sandwich brazed to the plate and ground to a fine edge. Course toothed blades are alternate top bevel ground (ATB) whilst the finer toothed blades are top centre ground (TCG), ensuring the best performance for each application. The plate of the blade also has resin filled anti vibration slots. These greatly reduce the noise generated whilst cutting which must be a bonus for the saw operator and those nearby. These blades are recognised by the HSE as an invaluable method of reducing workshop noise. The Premium blades will give an exceptional cutting performance combined with a very reasonable price for such high technology blades.
General Purpose Saw Blade


Inc.vat 105.50 Fine Saw Blade

355mm Dia 30mm Bore
Ex.vat 87.92
Code 951529
Ex.vat 106.25
Code 951533
72 Teeth 3.5mm Kerf TCG
400mm Dia 30mm Bore
254mm
Rip Saw Blade
305mm
Rip Saw Blade
315mm
Rip Saw Blade
Inc.vat 135.50
Ex.vat 112.92
Code 951530
Inc.vat 169.50
Ex.vat 141.25
Code 951534
Extra Fine Saw Blade

355mm Dia 30mm Bore 108 Teeth 3.5mm Kerf TCG

Inc.vat 40.96
Ex.vat 34.13
Code 951520
Inc.vat 63.00
Ex.vat 52.50
Code 951524
Inc.vat 66.95
Ex.vat 55.79
Code 501023
Inc.vat 139.00
Ex.vat 115.83
Code 951531
Inc.vat 171.00
Ex.vat 142.50
Code 951535


305mm Dia 30mm Bore 48 Teeth 3.2mm KerfATB

260mm
Negative Rake Saw Blade
Negative Rake Saw Blade


254mm Dia 30mm Bore
Ex.vat 44.16
Code 951521
Ex.vat 70.79
Code 951525
Inc.vat 90.50
Ex.vat 75.42
Code 501024 Inc.vat 72.50 Ex.vat 60.42 Code 501027 Inc.vat 89.50 Ex.vat 74.58 Code 501028
Cross Cut Saw Blade

72 Teeth 3.2mm Kerf TCG 315mm Dia 30mm Bore 72 Teeth 3.2mm Kerf TCG
305mm Dia 30mm Bore
Axcaliber Split Scoring Blades

Inc.vat 72.50 Ex.vat 60.42 Code 951522 Inc.vat 118.96 Ex.vat 99.13 Code 951526 Inc.vat 126.50 Ex.vat 105.42 Code 501025
These flat adjustable scoring blades will allow you to make different thickness cuts by increasing or decreasing number of spacer shims. The scoring saw is a standard fitting on several of the larger saw benches in our range, particularly those designed for cutting sheet material. The blade is fitted a short distance in front of the main blade and cuts a shallow groove on the underside of the board, preventing splintering on faced and veneered boards. The scoring blades listed here are of the adjustable type and come in two parts with a set of shims so that Inc.vat Ex.vat Code the cut can be aligned exactly with 80 x (2.8-3.6mm) 49.55 41.29 951582 that of the main blade. The 80mm 100 x (2.8-3.6mm) 51.95 43.29 951583 diameter has a 20mm bore 120 x (2.8-3.6mm) 53.95 44.96 951584 together with 951805 and 100 x (2.8-3.6mm) 51.95 43.29 951805 951804. 951583 and 951584 are 120 x (2.8-3.6mm) 53.95 44.96 951804 22mm bore.



Inc.vat 88.50
Ex.vat 73.75
Code 951523
Inc.vat 110.50
Ex.vat 92.08
Code 951527
Inc.vat 117.00
Ex.vat 97.50
Code 501026
92
Industrial Bandsaws
Cast iron wheels
Blade quick release lever
Table tilt quadrant
Lower blade guide
Axminster Industrial Series AP3501B3 Bandsaw

The AP3501B3, with its high quality, specification and modest price, is an upgraded machine for the small trade workshop. The combination of rigidly built steel body, finely ground cast iron table, deep section rip fence and fully adjustable ball bearing blade guides produce the level of performance demanded by both the trade and advanced skills amateur user. The rip fence runs on a calibrated aluminium extrusion and is locked firmly in place with a camlock lever, giving a firm and accurate location. The adjustable precision mitre fence is T-slotted into the table for added safety and accuracy. At the rear of the machine are the blade tracking control, the blade tension indicator and a quick action blade tension lever, useful for both blade changing and for releasing the tension on the blade when the machine is not in use. Safety features include a electro-magnetic motor brake, interlocked and micro switched doors and a key release emergency stop switch. Supplied complete with floor stand, rip fence and blade. This upgraded bandsaw is fully compliant with both the requirements of BS 4163:2008 (for educational establishments) and PUWR98 (workplace) regulations. This machine will also appeal to those requiring the very highest standards of performance and safety in their workplace. Please contact our Specialist Sales Department (0845 0707870) for further details. Model Rating Power Blade Speed Blade Length Blade Width Min/Max Max Width of Cut Max Depth of Cut Table Size Table Height on Stand Table Tilt Table Height Dust Extraction Outlet Overall L x W x H Weight AP3501B3 Industrial 750W 800m/min 2,552mm(100.1/2) 3mm(1/8)/19mm(3/4) 340mm 200mm 495 x 360mm 1,060mm 10 - 0 - 45 490mm 100mm 445 x 610 x 1,753mm 85kg
Axminster Industrial Series AP4300T/1 & AP5300T/1 Bandsaws

These floor standing Axminster Industrial Series bandsaws are designed for continuous use in the busy workshop or manufacturing situation. Powerful, smooth running induction motors, large cutting capacities, steel and cast iron construction and manufactured to the exacting standards expected from our Plus range of machines. They offer excellent safety features including electro-mechanically braked motors, key release emergency stop switch and safety interlocked doors. Features include cast iron table, cast iron wheels, two blade speeds, heavy duty blade bearing guides throughout, mitre fence and an exceptionally rigid rip fence with an easy to read magnifying scale. Fitted with two x 100mm dust outlets for excellent dust control when fitted to a suitable extractor. These upgraded bandsaws are fully compliant with both the requirements of BS 4163:2008 (for educational establishments) and PUWR98 (workplace) regulations. Please contact our Specialist Sales Department (0845 0707870) for further details. N.B 16A supply is required. Model Rating Power Blade Speed Blade Length Blade Width Min/Max Max Width of Cut Max Depth of Cut Table Size Table Tilt Table Height Dust Extraction Outlet Overall L x W x H Weight AP4300T/1 Industrial 1,500W (230V) 430 & 850m/min 3,327mm(131) 3mm(1/8)/25mm(1) 410mm 300mm 600 x 430mm 10 - 0 - 45 950mm 2 x 100mm 820 x 670 x 1,880mm 145kg AP5300T/1 Industrial 1,500W (230V) 575 & 1,200m/min 3,860mm(152) 6mm(1/4)/25mm(1) 510mm 310mm 530 x 530mm 10 - 0 - 45 950mm 2 x 100mm 1,020 x 790 x 2,040mm 163kg
Large cast table
AP3501B3 Bandsaw 230V Pack of 5 Blades 2,552mm 2,552mm x 19mm x 4-6Tpi 2,552mm x 13mm x 6-10Tpi 2,552mm x 13mm x 10-14Tpi
Inc.vat 1,049.50 62.00 41.30 38.90 38.90
Ex.vat 874.58 51.67 34.42 32.42 32.42
Code 700356 719580 211501 212025 212034
AP4300T/1 Bandsaw 230V AP5300T/1 Bandsaw 230V 3,327mm x 13mm x 6-10Tpi 3,327mm x 13mm x 10-14Tpi
Inc.vat Ex.vat 1,289.50 1,074.58 1,409.50 1,174.58 49.00 40.83 57.00 47.50
Code 700355 700353 951664 951665
93
Industrial Bandsaws
Rigid Table Trunnion
Axminster Industrial Series AP5300HD3 & AP6300HD3 Bandsaws

These heavy duty Axminster Industrial Series bandsaws are designed for continuous use in manufacturing or production facilities. Powered by electro-magnetically braked motors that offer ample power at full depth of cut in all timbers. The heavily fabricated chassis is in welded steel with perfectly balanced solid cast iron wheels to give exceptionally smooth running. It has a very large cast iron ground surfaced table with a user friendly table tilt rack and pinion mechanism, table lock lever, mitre fence and a deep section cast iron rip fence with solid chromed steel rail. Other features include safety interlocked doors, heavy duty blade guide bearings throughout, twin belt drive with simple to adjust belt tightening, and a quick release blade tensioning lever to simplify and speed up the blade changing process. Dust extraction is well catered for with two x 100mm outlets, offering almost dust free cutting when connected to a suitable extractor. Offering up to a full 620mm(24) cutting width and a 405mm(16) cutting depth, the AP6300HD is the machine to have for processing those large workpieces that defeat lesser bandsaws! These models are fully compliant with PUWR98 (workplace) regulations and will appeal to those seeking the highest standards of safety and performance. The AP5300-TH3 also complies with BS4163-2007 making this machine suitable for educational use. For further details contact our Specialist Sales Dept (0845 0707870). N.B. 3ph only. Model Rating Power Blade Speed Blade Length Blade Width Min/Max Max Width of Cut Max Depth of Cut Table Size Table Tilt Table Height Dust Extraction Outlet Overall L x W x H Weight AP5300HD3 Industrial 2.2kW (415V) 1,370m/min 4,190mm(165) 6.3mm(1/4)/35mm(1.3/8) 510mm 350mm 530 x 750mm 0 - 45 900mm 2 x 100mm 1,002 x 727 x 1,982mm 264kg AP6300HD3 Industrial 3.7kW (415V) 1,615m/min 4,600mm(181) 9.5mm(3/8)/38mm(1.1/2) 620mm 405mm 600 x 850mm 0 - 45 830mm 2 x 100mm 1,190 x 750 x 2,060mm 380kg
Jet JWBS-14Q Bandsaw
Balanced Alloy Wheels
The Jet JWBS-14Q is intended for heavy work and has balanced cast alloy blade wheels, a superb cast iron table which can tilt from -10 to +45, and a locking rip fence which is supported at the front and rear of the table and extends slightly beyond the cast iron table to give an excellent capacity on both sides of the blade. On the face of the rip fence is a parallel cutting attachment which is ideal for resawing. The mitre fence is T slotted into the table for accuracy, safety and extended capacity. The blade is guided both above and below the table with micrometer-adjusted thrust and bearing rollers which give a positive support to the blade, resulting in a very good quality of cut and extended blade life. With fully interlocked doors, electro-mechanical motor brake, easily accessible, dual function quick release blade tension for easy blade changing and tracking controls, this machine is for the professional workshop where an accurate bandsaw with good capacities will become a very popular machine with which to work. To move this machine around the workshop we recommend the purchase of the mobile base unit (708119). This additional base unit is easy to fit and allows the machine to be moved without fear of tipping the unit over or causing any damage to either the operator or the machine. Model Rating Power Blade Speed Blade Length Blade Width Min/Max Max Width of Cut Max Depth of Cut Max Width of Cut with Fence Table Size Table Tilt Table Height Wheel Diameter Dust Extraction Outlet Overall L x W x H Weight JWBS-14Q Industrial Input 950W (240V) 800m/min 2,560mm (100.1/2) 3mm (1/8) 25mm (1) 350mm 200mm 300mm 430 x 430mm 10-0-45 880mm 355mm 100mm 900 x 1,100 x 1,800 mm 120kg
AP5300HD3 Bandsaw 415V AP6300HD3 Bandsaw 415V 4,190mm x 19mm x 4-6Tpi 4,190mm x 13mm x 6-10Tpi 4,597mm x 13mm x 6-10Tpi 4,597mm x 19mm x 4-6Tpi
Inc.vat Ex.vat 1,979.50 1,649.58 2,659.50 2,216.25 66.50 55.42 60.95 50.79 66.00 55.00 72.50 60.42
Code 700354 700352 951670 951669 951671 951672
Quick Release Blade Lever
JWBS-14Q Bandsaw 2,552mm x 19mm x 4-6Tpi 2,552mm x 13mm x 6-10Tpi 2,552mm x 13mm x 10-14Tpi
Inc.vat 979.50 41.30 38.90 38.90
Ex.vat 816.25 34.42 32.42 32.42
Code 950345 211501 212025 212034
94
Industrial Bandsaws
Jet JWBS-16Q, JWBS-18Q & JWBS-20Q Bandsaws

The Jet JWBS saws are intended for heavy work and have cast iron blade wheels, a super cast iron table which can tilt from -10 to +45, and a locking rip fence which is supported at the front and rear of the table and extends slightly beyond the cast iron table to give an excellent capacity on both sides of the blade. On the face of the rip fence is a point cutting attachment which is ideal for re-sawing. The mitre fence is T slotted into the table for accuracy, safety and extended capacity. The blade is guided both above and below the table with micrometer-adjusted thrust and bearing rollers which give a positive support to the blade, resulting in a very good quality of cut and extended blade life. With fully interlocked doors, electro-mechanical motor brake and with easily accessible blade tension and tracking controls, these machines are for the professional workshop where an accurate bandsaw with good capacities can become a very popular machine with which to work. To move any of these machines around the workshop we recommend the purchase of the mobile base unit (stock number 708119). This additional base unit is easy to fit and allows the machine to be moved without fear of tipping the unit over or causing any damage to either the operator or the machine. Q models have blade quick release levers. N.B. A 20A supply is recommended when used with 240 volt supply. Model Rating Power Blade Speed Blade Length Blade Width Min/Max Max Width of Cut Max Depth of Cut Max Width of Cut with Fence Table Size Table Tilt Table Height Wheel Diameter Dust Extraction Outlet Overall L x W x H Weight JWBS-16Q Industrial Input 1,100W (240V) 900m/min 3,124mm(123) 3mm(1/8)/32mm(1.1/4) 405mm 250mm 355mm 430 x 430mm -10 to +45 890mm 420mm 100mm (x 2) 800 x 950 x 1,850mm 130kg Model Rating Power Blade Speed Blade Length Blade Width Min/Max Max Width of Cut Max Depth of Cut Max Width of Cut with Fence Table Size Table Tilt Table Height Wheel Diameter Dust Extraction Outlet Overall L x W x H Weight JWBS- 18Q Industrial 2.6kW (240V) - 4.2kW (415V) 550 & 970m/min 3,480mm 3mm(1/8)/32mm(1.1/4) 460mm 300mm 410mm 485 x 485mm -10 to +45 950mm 470mm 100mm (x2) 900 x 1,100 x 1,900mm 165kg Model Rating Power Blade Speed Blade Length Blade Width Min/Max Max Width of Cut Max Depth of Cut Max Width of Cut with Fence Table Size Table Tilt Table Height Wheel Diameter Dust Extraction Outlet Overall L x W x H Weight JWBS-20Q Industrial 2.6kW (240V) - 4.2kW (415V) 550 & 970m/min 3,820mm 3mm(1/8)/32mm(1.1/4) 508mm 300mm 480mm 530 x 530mm -10 to +45 930mm 520mm 100mm (x2) 900 x 1100 x 1900mm 230kg
JWBS-16Q Bandsaw - 240V 3,124mm x 13mm x 6-10Tpi 3,124mm x 13mm x 10-14Tpi 3,124mm x 19mm x 4-6Tpi
Inc.vat Ex.vat 1,239.50 1,032.92 42.20 35.17 46.40 38.67 49.36 41.13
Code 600537 211502 211503 211504
JWBS-18Q Bandsaw 240V JWBS-18Q Bandsaw 415V 3,480mm x 13mm x 6-10Tpi 3,480mm x 13mm x 10-14Tpi 3,480mm x 19mm x 4-6Tpi
Inc.vat Ex.vat 1,449.50 1,207.92 1,449.50 1,207.92 50.99 42.49 46.45 38.71 54.50 45.42
Code 210683 210684 211511 211512 211513
JWBS-20Q Bandsaw 240V JWBS-20Q Bandsaw 415V 3,820mm x 13mm x 6-10Tpi 3,820mm x 13mm x 10-14Tpi 3,820mm x 19mm x 4-6Tpi
Inc.vat Ex.vat 1,919.50 1,599.58 1,919.50 1,599.58 55.50 46.25 50.50 42.08 54.95 45.79
Code 210685 210686 211508 211509 211510
95
Industrial Bandsaw Blades
Heavy Duty Machine Base

Adjustable 5 point ball bearing guides
A choice of two all-steel bases, adjustable for size, with fixed wheels on the back corners and two lockable castoring wheels on the front. The smaller one will fit machine bases from 460mm to 710mm and take a weight of 250kg whilst the larger one takes bases from 610mm to 860mm and a load of 540kg.
Mobile Base 250kg Machine Mobile Base 540kg
Inc.vat 85.50 95.99
Ex.vat 71.25 79.99
Code 708118 708119
Jet VBS18MW Wood & Metal Cutting Bandsaw

This bandsaw has been designed for a workshop that requires a wood cutting bandsaw with the capability of occasional metal cutting, or vice versa. The VBS18MW is capable of cutting timber, ferrous and non-ferrous metals (using the correct blade). A two speed gearbox lets you choose the ideal cutting speeds for wood or metal, the three belts speeds giving 250, 450 or 820m/min or 20, 40 or 70m/min. Adjustment for the most suitable speed for efficient cutting is straight forward. The bandsaw is supplied with two chip trays for the separate collection of metal cutting swarf. A large hand wheel and rack system allows simple adjustment of the cutting height and there is an easy to read built-in cutting height scale. The blade is well supported above and below the table by ball bearing guides. A viewing window is provided for easy blade tracking control, the blade runs on balanced cast iron wheels with crowned, long-life PU tyres. The generous cast iron table tilts from 10to + 45, and is supplied with both rip cutting and mitre cutting fences. Standard equipment includes: On/Off NVR switch, 20mm bandsaw blade 2 chip trays, rip fence, mitre fence and crosscut vice. Model Rating Power Blade Speed Blade Length Blade Width Min/Max Max Depth of Cut Max Width of Cut with Fence Table Size Table Tilt Table Height Wheel Diameter Dust Extraction Outlet Overall L x W x H Weight VBS18MW Industrial Input 2.2kW Wood 250/450/820m/min Metal 20/40/70m/min 3,480mm(137) 3mm(1/8)/30mm(1.1/8) 300mm 460mm 485 x 485mm 45-0-10 950mm 470mm 100mm 970 x 1,070 x 1,900mm 210kg
This is a primary wood processing and ripping bandsaw blade delivered ready for immediate work.
Manufactured from premium carbon rich European steel, each tooth is ground using high precision CNC machinery rather than being punched and sharpened The teeth are . then induction hardened, ensuring an outstanding life and as many as 20 re-sharpens before the blades cutting performance is reduced. These blades offer the longest working life and the best possible cutting performance. Your bandsaw is only as good as Individuals the blade that 3,480mm (137) you fit. The Ripper 37 has 3,820mm (150) no compromises. 4,010mm (157) All blades are 32mm 4,190mm (165) (1.1/4") wide x 1.1tpi 4,450mm (175) 4,600mm (181) 5,125mm (202) Bandsaw Blade Length
Model Axminster AP5300HD3 Axminster AP6300HD3 Axminster HB600A Axminster HB700 Jet JWBS-18Q Jet JWBS-20Q Jet VBS18MW Woodmizer (mm) 4,190 4,600 4,450 5,125 3,480 3,820 3,480 4,010
Inc.vat 33.30 36.60 38.40 40.10 42.60 43.99 49.00 Inc.vat 117.50 125.99 131.99 139.00 148.96 152.50 172.96
Ex.vat 27.75 30.50 32.00 33.42 35.50 36.66 40.83 Ex.vat 97.92 104.99 109.99 115.83 124.13 127.08 144.13
Code 501101 501102 501103 501097 501099 501098 501100 Code 501079 501080 501081 501075 501077 501076 501078
Packs of 5
3,480mm (137) 3,820mm (150) 4,010mm (157) 4,190mm (165) 4,450mm (175) 4,600mm (181) 5,125mm (202)
VBS18MW Bandsaw 230V 3,480mm x 19mm x 4-6Tpi 3,480mm x 13mm x 6-10Tpi 3,480mm x 13mm x 10-14Tpi
Inc.vat Ex.vat 1,979.50 1,649.58 54.50 45.42 50.99 42.49 46.45 38.71
Code 600755 211513 211511 211512
96
Industrial Tenoners
Two separately powered heads Fully braked individually switched motors Emergency foot operated stop switch Full thermal overload protection Two main heads equipped with four replaceable shear-cutting knives and two spur cutters Cam action work clamp Two main cutter heads 175 x 60mm Invaluable in any production workshop
Axminster Industrial Series SETM-2HD 2 Head Tenoner

A machine in the best traditional fashion, the Axminster Industrial SETM-2HD 2 Head Tenoner is designed and built to withstand continuous production use. Its cast iron base, column and slide ways provide a rigid and durable mainframe assembly, and the high efficiency motors supply ample power. The large, ground cast iron sliding table slides easily on its ball race supported wheels, and cutter head slide movements are smooth and easily adjusted on dovetail slides. Extremely versatile and taking only minutes to set up, the Axminster Industrial SETM-2HD tenoner is easy to use and accurate in operation. Work is positioned on the rolling table against an end stop and a fence, and is secured by a cam action clamp. Its end is then passed between two vertically mounted cutter heads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder length are set using the rule on the end stop, and staggered tenons are achieved by simple hand wheel adjustment of the top motor, with digital counters to help the measurements. Each cutting head has provision for profile knives to enable the cross section of the components being jointed to be matched. Stepped tenons, splayed tenons, double tenons and multiple bridles are all possible on this versatile machine. Model SETM-2HD 2 Combinations of 90 Rating Industrial and bevelled cutting Power 2 x 2.2kW (230V 1ph) - 2 x 2.2kW (415V 3ph) discs with appropriate Main Cutter Heads 2,175 x 60mm spacers can also be Vertical Adjustment Bottom Block 0-60mm fitted to produce Vertical Adjustment Top Block 0-100mm interleaved joints as Horizontal Adjustment Top Block 32mm used in sash window construction. This Timber Capacity Height Fence @ 45 130mm tenoner may also be used to produce comb and Timber Capacity Width Fence @ 45 195mm finger joints by replacing the main cutter heads Timber Capacity Width Fence @ 90 310mm with the appropriate disc type cutters. Max Length of Tenon Single Pass 155mm N.B. 16 Amp supply required. Max Length of Tenon Two Passes 205mm Table Size Dust Extraction Outlet Overall L x W x H Weight 800 x 310mm 2 x 150mm 1,320 x 1,020 x 1,560mm 420kg
SETM-2HD 230V (1ph) SETM-2HD 415V (3ph) Knives 60 x 12 x 1.5mm (Pkt 10)
Inc.vat Ex.vat 4,359.50 3,632.92 4,189.50 3,491.25 41.60 34.67
Code 211980 211981 100729
97
Industrial Tenoners
Three separately powered heads Fully braked individually switched motors Emergency foot operated stop switch Full thermal overload protection Two main heads equipped with four replaceable shear-cutting knives and two spur cutters Third scribing head Cam action work clamp Invaluable in any production workshop
Axminster Industrial Series SETM-3HD 3 Head Tenoner

A machine in the best tradition, the Axminster Industrial Series SETM-3HD 3 Head Tenoner is designed and built to withstand continuous production use. Its cast iron base, column and slide ways provide a rigid and durable mainframe assembly, and the high efficiency motors supply ample power. The large, ground cast iron sliding table slides easily on its ball race supported wheels, and cutter head slide movements are smooth and easily adjusted on dovetail slides. Extremely versatile and taking only minutes to set up, the Axminster Industrial SETM-3HD Tenoner is easy to use and accurate in operation. Work is positioned on the rolling table against an end stop and a fence, and is secured by a cam action clamp. Its end is then passed between two vertically mounted cutter heads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder length are set using the rule on the end stop, and staggered tenons are achieved by simple hand wheel adjustment of the top motor, with digital counters to help the measurements. Each cutting head has provision for profile knives to enable the cross section of the components being jointed to be matched. The standard scribing head allows many different configurations of tenons to be achieved. Stepped tenons, splayed tenons, scribed tenons, double tenons, and multiple bridles and finger joints are all possible on this versatile machine. Combinations of 90 and bevelled cutting discs with appropriate spacers can also be fitted to produce interleaved joints as used in sash window construction. N.B. 32 Amp supply required.
Rating Industrial Power 3 x 2.2kW (230V 1ph) - 3 x 2.2kW (415V 3ph) Main Cutter Heads 2, 175 x 60mm. 1, 125 x 60mm Vertical Adjustment Bottom Block 0-60mm Vertical Adjustment Scibing Head 95mm Vertical Adjustment Top Block 0-100mm Horizontal Adjustment Scibing Head 95mm Horizontal Adjustment Top Block 32mm Scribing Head Shaft Diameter 75 x 30mm Timber Capacity Height Fence @ 45 130mm Timber Capacity Width Fence @ 45 195mm Timber Capacity Width Fence @ 90 310mm Max Length of Tenon Single Pass 155mm Max Length of Tenon Two Passes 205mm Table Size 800 x 310mm Dust Extraction Outlet 2 x 150mm Overall L x W x H 1,320 x 1,020 x 1,560mm Weight 470kg
SETM-3HD 230V 1ph SETM-3HD 415V 3ph Knives 60 x 12 x 1.5mm (Pkt 10)
Inc.vat Ex.vat 4,849.50 4,041.25 4,679.50 3,899.58 41.60 34.67
Code 211521 210693 100729
Sliding table and material clamp
Easy cutterblock access
Optional Large Scribing Head

This optional 125 x 65mm scribing head for use with the Axminster and Sedgwick TESH three head tenoners.
Inc.vat Optional 125 x 65mm Scribing Head 182.50
Ex.vat 152.08
Code 900255
98
Industrial Morticers
Single handwheel design for both longitudinal and lateral table movement Two position material clamp for fast clamping of a variety of material sizes Multi-position hand lever positions to provide the correct leverage for comfortable use Gas strut to provide smooth downward travel of the chisel head Large storage space in stand cupboard Large table surface with tall back fence Easily set depth stop for repeat accuracy Feet brackets provided to allow machine to be bolted to the workshop floor Maximum chisel size 25mm (softwood), 19mm (hardwood) Chisel bushing size 1.3/16 OD
25mm capacity Accurate and quick-to-change material clamp Fully adjustable slideways Ratchet setting on main operating handle Motor and switch gear are virtually silent in operation Simple and effective depth stop Head rotates 180 for door lock morticing Cabinet base fabricated from heavy gauge sheet steel Supplied with bushes for 3/4 13/16 and 1.13/16 , shank chisels and cabinet base
Jet 719-A Floor Standing Morticer

A floor standing morticer with a 25mm capacity. The unique screw and fast action nut allows the material clamp to be set across its length in seconds. With fully adjustable slideways the morticer has travel in both directions with lock on the fore and aft setting. The main operating handle has a clever ratchet setting which allows it to be quickly set in the correct position for optimum leverage. The depth stop is simple and very effective to use. Along the back of the main table is a mortice length setting device which allows the mortice length to be pre-set for reduced marking out. The cabinet base is fabricated from heavy gauge sheet steel and incorporates a shelf in the base for storage of chisels, bits and service tools. Bushes are provided for 3/4 13/16 and , 1.13/16 shank chisels. Supplied with cabinet base, chisel bushings and service tools. Model 719-A Rating Industrial Power Input 1,300W Chisel Stroke 140mm Centre of Chisel to Back Fence 100mm Max Height of Timber with 12.7mm Chisel and Bit 190mm Max Chisel Size Softwood 25mm Max Chisel Size Hardwood 19mm Overall L x W x H 700 x 580 x 950mm (1,550mm inc stand) Weight 110kg
Axminster Industrial Series YC2308 Floor Standing Morticer

A heavy duty morticer of 25mm capacity, cast iron construction with a welded steel stand. With many features such as single handwheel design for both longitudinal and lateral table movement, two position material clamp for fast clamping, multi-position hand lever positions to provide the correct leverage for comfortable use, gas strut to provide smooth downward travel of the chisel head, also allowing travel stop in any position, large storage space in stand cupboard, large table surface with tall back fence, easily set depth stop for repeat accuracy and feet brackets provided to allow machine to be bolted to the workshop floor. This machine is well suited to the busy workshop and will provide years of accurate and trouble free use. N.B. A chisel morticer will only work as well as the chisel cuts, please do not stint on the quality of the chisels you purchase. Accepts 1.3/16 and 13/16 chisels. Lateral table travel 90mm, longitudinal 400mm. Model YC 2308 Rating Industrial Power 750W Chisel Stroke 125mm Max Height of Timber with 12.7mm Chisel and Bit 170mm Max Chisel Size Softwood 25mm Max Chisel Size Hardwood 19mm Overall L x W x H 670 x 560 x 750mm Weight 165kg
719A Morticer 240V
Inc.vat 963.95
Ex.vat 803.29
Code 310043
Japanese Pattern Mortice Chisels & Bits, Metric

Japanese Pattern. The auger bit on this type has a point on the end, one cutting spur and a single spiral for rapid chip clearance. The single spur is easy to sharpen and the bits cut evenly and fast, even in the hardest of timbers. N.B. As all the auger bits have to accommodate different machines they are supplied long and will need cutting with a conventional hacksaw blade to suit the specific machine for which purchased.
Inc.vat YC2308 Floor Standing Morticer 230V 1,069.50 YC2308 Floor Standing Morticer 415V 1,069.50
Ex.vat 891.25 891.25
Code 600801 600816
A = Size B = Maximum Depth C = Mounting Diameter D = Bit Shank Diameter
A B 6mm 45mm 8mm 56mm 10mm 73mm 12mm 79mm 16mm 98mm 20mm 127mm
C 13/16 13/16 13/16 13/16 13/16 1.3/16
D 5/32 5/32 1/4 3/8 1/2 1/2
Inc.vat 55.50 55.50 58.96 68.99 78.95 97.50
Ex.vat 46.25 46.25 49.13 57.49 65.79 81.25
Code 510295 510296 510287 510288 510289 510290
99
Industrial Spindle Moulders

Substantial cast iron and welded steel construction 30mm diameter spindle with three spindle speeds Small cast iron sliding table with work clamp Comprehensive fence/extraction hood system with adjustable fences 180mm tool diameter below, 200mm above the table Choice of 230V 1ph or 415V 3ph versions
Axminster Industrial Series SS-510M Spindle Moulder

This is a good, solid compact spindle moulder, built for professional use and based around a heavy gauge welded steel chassis that is powder coated for protection. The table is high grade cast iron, with a finely ground low friction surface and has a small cast iron sliding table that moves on precision bearings. This also has a cam lock material clamp and angle fence. The 30mm diameter spindle has 100mm travel, is non-tilting and is driven by a 3hp (1ph) or 4hp (3ph) induction motor via a three speed belt drive. Having a capacity of 180mm below the table and 200mm above, a wide range of tooling to handle many tasks can be used. A nicely designed fence/hood assembly is fitted with fully adjustable fence wings and material hold down guides. The table is pre-drilled for a power feed (Co-Matic AF32 Junior). N.B. 16Amp supply required Model SS-510M Rating Industrial Power 2.2kW (230V 1ph) - 2.95kW (415V 3ph) Spindle Travel 100mm Spindle Diameter 30mm Max Spindle Projection above Table 100mm Max Tooling Diameter Above Table 200mm Max Tooling Diameter Below Table 180mm Table Height 850mm Table Size 700 x 600mm Dust Extraction Outlet 1 x 127mm(5), 1 x 100mm(4) Overall L x W x H 850 x 690 x 1,200mm Weight 200kg
SS-510M Spindle Moulder 1ph SS-510M Spindle Moulder 3ph
Inc.vat Ex.vat 2,649.50 2,207.92 2,539.50 2,116.25
Code 501002 501003
Precision ground cast iron table with deep sections 30mm spindle with spacing collars 4.1kW 415V motor with five spindle speeds Maximum tooling diameter above table 335mm Cast iron fence/extraction hood with extra long adjustable extensions All controls grouped on the front panel for ease of use
Axminster Industrial Series SS-512ML Spindle Moulder 3ph

A rugged medium sized professional spindle moulder with a deep section, precision ground high grade cast iron table. With a choice of five spindle speeds and a capacity of 335mm tooling diameter above the table many deep profiles and rebates can be machined. Ample power is available from its 4.1kW braked induction motor and, with a very large access panel, the spindle speeds are easily changed. A large spindle height control handle is also provided with an indication gauge for precise spindle setting. All electrical controls are grouped on the front panel for convenience along with the spindle speed indicators. The cast fence and extraction hood is fitted with extra long fence wings, each individually micro-adjustable for accurate machining. The table is pre-drilled for a power feed (Co-Matic AF32 Junior). Model SS-512ML Rating Industrial Power 4.1kW (415V 3ph) Spindle Travel 170mm Spindle Diameter 30mm Max Tooling Diameter Above Table 335mm Max Tooling Diameter Below Table 210mm Table Height 870mm Table Size 1,300 x 850mm Dust Extraction Outlet 1 x 127mm(5), 1 x 100mm(4) Overall L x W x H 1,300 x 900 x 1,320mm Weight 530KG
SS-512ML Spindle Moulder 3ph
Inc.vat Ex.vat 4,059.50 3,382.92
Code 501004
100
Industrial Spindle Moulders

Precision ground cast iron table with integrated sliding table 30mm spindle, tilts +10 to -45 to give the greatest flexibility of use 4.1kW 415V motor with 5 spindle speeds Maximum tooling diameter above table 360mm Cast iron fence/extraction hood with extra long adjustable extensions All electrical controls grouped on the front panel for ease of use
Axminster Industrial Series SS-512TSL Spindle Moulder 3ph

A rugged medium sized professional spindle moulder with a deep section, precision ground high grade cast iron table. An integrated sliding table runs on six adjustable ball bearings giving exceptionally smooth travel. The 30mm diameter spindle can tilt forward 10 and backwards 45 which has many advantages including: Safer working, machining from under the workpiece gives optimum operator protection Possibility of machining any size of workpiece Full use of pressure guards and power feeders without obstruction Minimising the load on the spindle bearings to increase the durability of the machine Gives perfect dust collection, the waste is directed straight into the extraction port Model SS-512TSL Rating Industrial Power 4.1kW (415V 3ph) Spindle Travel 180mm Spindle Diameter 30mm Max Tooling Diameter Above Table 360mm Max Tooling Diameter Below Table 310mm Table Height 900mm Table Size 1,300 x 960mm inc sliding table Dust Extraction Outlet 1 x 127mm(5), 1 x 100mm(4) Overall L x W x H 1060 x 900 x 1,320mm Weight 650kg
With a choice of five spindle speeds and a capacity of 360mm tooling diameter above the table, many deep profiles and rebates can be machined. Ample power is available from its 4.1kW braked induction motor and with a very large access panel, the spindle speeds are easily changed. Large spindle control handles are also provided including an indication gauge for precise spindle height setting. All electrical controls are grouped on the front panel for convenience along with the spindle speed indicators. The cast fence and extraction hood is fitted with extra long fence wings, each individually micro-adjustable for accurate machining. The table is pre-drilled for a power feed (Co-Matic AF32 Junior).
SS-512TSL Spindle Moulder 3ph
Inc.vat Ex.vat 5,009.50 4,174.58
Code 501005
Power Feeds
Co-Matic AF308 Power Feed

A heavy duty power feed with four speeds from 2.9 to 11.5m/min for the 240V 1ph or eight from 2.9 to 23m/min on the 415V 3ph version. The unit has a 50mm column and a 200mm depth under the head with a far more powerful motor than the smaller units previously listed. The three rollers are 50mm wide and provide a greater traction with this increased width. Due to the weight of this item, it is recommended to fix it directly to the table top of the machine. For the professional workshop. Model Rating Power Max Capacity Reach Feed Speed Roller Size Weight AF308 Trade 375W 200mm 415mm 2.9 to 11.5m/min (1ph) 2.9 to 23m/min (3ph) 100 x 50mm 50kg
Co-Matic AP34 Power Feed

A heavy duty industrially rated power feeder for professional use. The weight and duty of this machine is adequate for nearly all production applications. The unit has four feed speeds and three 60mm traction rollers. Four way adjustable mounting arm. A heavy duty roller is also available as an upgrade if needed. Must be mounted directly onto the machine. This unit is available only in 415V 3ph. Model Rating Power Max Capacity Reach Feed Speed Roller Size Weight AP34 Industrial 735W 215mm 760mm 4 - 22m/min 120 x 60mm 60kg
Co-Matic AP48 Power Feed

An extra heavy duty industrially rated power feeder for production use. The grip afforded and the choice of speeds of this machine make it suitable for all production applications. The unit has eight feed speeds and four 60mm traction rollers. Four way adjustable mounting arm. A heavy duty roller (100393) is also available as an upgrade if needed. Must be mounted directly onto the machine. This unit is available only in 415V 3ph. Model Rating Power Max Capacity Reach Feed Speed Roller Size Weight AP48 Industrial 735W 215mm 760mm 2 - 33m/min 120 x 60mm 63kg
AF308 Power Feed 240V AF308 Power Feed 415V Replacement Roller (1)
Inc.vat 701.99 690.50 8.86
Ex.vat 584.99 575.42 7.38
Code 210134 210135 100394
AP34 Power Feed 415V Replacement Roller (1) Heavy Duty Roller (1)
Inc.vat 752.50 16.45 16.45
Ex.vat 627.08 13.71 13.71
Code 210138 100392 100393
AP48 Power Feed 415V 3ph Replacement Roller (1) Heavy Duty Roller (1)
Inc.vat 852.50 16.45 16.45
Ex.vat 710.42 13.71 13.71
Code 201041 100392 100393
101
Industrial Sanders
Jet DDS-225 Dual Drum Sander

There is plenty of power in this machine and the robust construction makes it an excellent choice for production sanding. The rear drum is micro adjustable to allow for variations of stock removal. Either 75mm or 100mm wide abrasive strips can be used and changing the abrasive is a quick and straightforward operation. The sanding drums are hard rubber coated guaranteeing best results. The conveyor is guided on jackscrews to maintain accuracy Model DDS-225 throughout the machines life. Rating Industrial The two speed gearbox can Power Input 5.5kW (415V) match the feed rate to different Speed 1,400rpm types of wood, whilst two x Feed Speed 2 or 3m/min 100mm dust extraction ports Sanding Width Single Pass 635mm help to create a clean working Sanding Thickness Min/Max 0.8/133mm environment when connected Sanding Drum Diameter 2 x 152mm to a suitable extractor. Dust Extraction Outlet 2 x 100mm Overall L x W x H Weight 1,090 x 1,120 x 1,090mm 332kg
Belt runs in any angle between 0 and 90 Precision ground steel plate belt platen with low friction graphite slip plate Belt oscillation by heavy duty worm gear mechanism running in an oil bath Ground cast iron front table can be fully adjusted for precise alignment with the belt 2 x 100mm dust ports ensure efficient dust collection Variable height end table for drum sanding is included
DDS-225 Sander 415V
Inc.vat Ex.vat 2,589.50 2,157.92
Code 110266
Axminster Industrial Series Oscillating Belt Sander

An industrial quality oscillating belt sander with many nicely thought out features. Well suited to any small to medium sized joinery workshop or cabinet makers, it is fully guarded and exceptionally easy to use. Can be used horizontally as well as vertically, the belt oscillates across the platen 50 times per minute providing a scratch free finish. In the vertical mode the work table can be raised by means of a hand wheel and adjusted to give a close gap to the sanding belt. A large quadrant scale give an accurate indication of the belt inclination for bevel work. An additional use is as a small vertical drum sander with the fitment of any of the three bobbins (1 1/2 2 3) supplied, using a small table , , assembly surrounding the idler roller. A robust, welded steel stand supports the whole machine and has a large cupboard for storing sanding sheets and accessories. A very well made and a very useful machine in any workshop. N.B. 16A 230V supply must be used. Model Rating Power Belt Speed Belt Size Table Size Dust Extraction Outlet Overall L x W x H Weight 200005 Industrial 1,470W 960m/min 150 x 2,260mm 680 x 305mm 2 x 100mm 1,300 x 700 x 1,215mm 180kg
Jet DDS-237 Dual Drum Sander

There is plenty of power in this machine and the robust construction makes it an excellent choice for production sanding. The rear drum is micro adjustable to allow for variations of stock removal. Either 75mm or 100mm wide abrasive strips can be used and changing the abrasive is a quick and straightforward operation. The sanding drums are hard rubber coated guaranteeing best results. The conveyor is guided on jackscrews to maintain accuracy Model DDS-237 throughout the machines life. Rating Industrial The two speed gearbox can Power Input 8.5kW (415V) match the feed rate to different Feed Speed 2 or 3 m/min types of wood, whilst two x Sanding Width Single Pass 940mm 100mm dust extraction ports Sanding Thickness Min/Max 0.8mm/133mm help to create a clean working Sanding Drum Diameter 152mm environment when connected Dust Extraction Outlet 2 x 100mm to a suitable extractor. Overall L x W x H 1,090 x 1,420 x 1,090mm Weight 440kg
200005 Belt Sander 230V Belt 150 x 2,260mm 80G Belt 150 x 2,260mm 100G Belt 150 x 2,260mm 120G Belt 150 x 2,260mm 150G Belt 150 x 2,260mm 180G
Inc.vat Ex.vat 1,589.50 1,324.58 7.00 5.83 6.65 5.54 6.65 5.54 6.65 5.54 6.65 5.54
Code 200005 300414 300415 300416 300417 300418
DDS-237 Sander 415V
Inc.vat Ex.vat 3,919.50 3,266.25
Code 700397
102
For guidance on performance ratings, please see Dust Extraction section
Industrial Extractors
2
CHIPS to FINE Dust
Ideal for the small, home workshop application 1,200W TwinFlo vacuum motor & 35L capacity all steel drum Three stage filtration down to 0.5 microns, HepaFlo bags included Included is a 2.5 metre x 51mm hose with a flexible rubber cuff 51mm stainless steel gulper crevice tool Fits many bench top machines, two year warranty, made in the UK
Numatic NV750 Workshop Vacuum Extractor

Ideal for the small, home workshop application and offering unrivalled performance, the NV 750 workshop vacuum extractor is in a league of its own. Specifically aimed at users of small, bench top machines and power tools, this extractor is light in weight and easily stored under the workbench. The head assembly incorporates a 1,200W TwinFlo vacuum motor providing ample power for all tasks and has a 10 metre cord set. The extractor is fitted with a Permatex filter giving filtration down to 0.5 micron, with the option of fitting a HepaFlo disposable filter bag if required, a must when machining MDF. There is a blower socket for the exhaust air which can be directed away from the workshop if required. The drum assembly incorporates a 51mm cyclonic inlet connector for large dust/chips, and a 51mm front entry for use with HepaFlo bags making this the perfect solution to almost all small workshop applications. The accessory kit includes a 2.5 metre 51mm flexible extraction hose with a rubber expanding cuff for linking to most workshop machines with up to 58mm dust ports. A 51mm stainless steel gulper crevice tool is provided for general workshop cleaning. A 2.9 metre 32mm hose and step down adaptor for connecting to hand operated power tools or small, bench top machines are low cost accessories. The accessories available enable this machine to be tailored to your own specific use, making it suitable for many uses in your workshop. This machine is the ideal solution for those requiring something portable and also to handle a large range of extraction tasks, robustly built in heavy gauge epoxy painted steel, has a 2 year warranty and best of all, its designed and made in England! Model Rating Power Noise Level Overall L x W x H Weight NV750 Industrial 1,200W 230V 70dB 450mm diameter x 650mm height 11.2kg
2 x 1,200W TwinFlo vacuum motors, 35L capacity all steel drum Fitted with a red Filtrex primary filter and a secondary Permatex filter Filtration down to 0.5 microns 10m easy change cable set Supplied with 4m x 100mm flexible extraction hose, 2.9m x 32mm hose and step down adaptor for power tool use 2 year warranty, designed and made in England
Two x 1,200W TwinFlo vacuum motors Fitted with a red Filtrex primary filter and a secondary Permatex filter 50L capacity all steel drum with carrying handles Supplied with accessory kit which includes a 4 metre 100mm vacuum hose, a 2.9 metre 32mm hose and step down adaptor Two year warranty Designed and made in England
Numatic NVD750 Workshop Vacuum Extractor

When it comes to workshop applications coupled with unrivalled performance, the NVD 750 workshop vacuum extractor is in a league of its own. Many operational features are included within the package which will enable the user to link the extractor to a machine or hand operated power tool as required. The head assembly incorporates two 1200W TwinFlo vacuum motors providing ample power for all but the most demanding of tasks. The extractor is fitted with a red Filtrex primary filter and a secondary Permatex filter as standard, with the option of fitting a HepaFlo disposable filter bag if required, a must when machining MDF. The Filtrex filter also protects the filter system from impact damage from fast moving larger chips. There is an exhaust blower socket to enable the exhaust air to be ducted away from the workshop if required. The 10 meter cable set provides all round the workshop use from one power point. The drum assembly incorporates a 100-32mm cyclonic inlet connector with a 51mm - 32mm reducer making this the perfect solution to most workshop applications. The accessory kit provided with this extractor includes a 4 metre, 100mm flexible extraction hose for linking to most small workshop machines, and a 2.9 metre 32mm hose and step down adaptor for connecting to hand operated power tools or small, bench top machines. The accessories available enable this machine to be tailored to your own specific use, including a mobility chassis, floor cleaning kit and a HEPA filter module for the ultimate in filtration, providing the best performing machine you could possibly want for your workshop. This machine is the best solution for those requiring something portable and also to handle a large range of extraction tasks, is ruggedly made in epoxy painted steel, has a 2 year warranty and best of all, is designed and made in England! Model Rating Power Noise Level Overall L x W x H Weight NVD750 Industrial 2 x 1,200W 230V 79dB 450mm diameter x 650mm height 12.8kg
Numatic NVD1500 Workshop Vacuum Extractor

Large capacity coupled with unrivalled performance make the NVD 1500 workshop vacuum extractor the answer for todays workshop requirements. The head assembly incorporates two 1,200W TwinFlo vacuum motors providing ample power for all but the most demanding of tasks. The extractor is fitted with a red Filtrex primary filter and a secondary Permatex filter as standard, offering filtration down to 0.5 micron, with the option of fitting a Trapit disposable filter bag if required, essential when machining MDF. The steel drum assembly has a maximum capacity of 50 litres, has 2 carrying grab handles,and incorporates a 100mm cyclonic inlet connector with a 51mm - 32mm reducer making this the perfect solution to most workshop applications. This size drum has been selected as the largest that can still be easily handled when full of waste material, anything larger would present possible problems when requiring emptying. The accessory kit included with the workshop vacuum extractor includes a 4 metre 100mm vacuum hose for linking to most workshop machines and a 2.9 metre 32mm hose and step down adaptor for connecting to a hand operated power tools or small benchtop machines. Many accessories are available to tailor this machine to your requirements, including a HEPA filter module for the ultimate in filtration. This is a rugged and high performing machine, designed and built in England! Model Rating Power Noise Level Weight NVD1500 Industrial 2 x 1,200W 230V 79dB 23kg
Inc.vat NV750 Vacuum Extractor 230V 238.50 Extraction Hose 2.9m & Adaptor 27.55 2.9m 32mm hose 18.35 Hepaflo Filter Bags NVM-4BH Pkt 10 16.99 HEPA Module 194.00 Floor Cleaning Kit 82.00 Clip-on Mobility Chassis 79.96
Ex.vat 198.75 22.96 15.29 14.16 161.67 68.33 66.63
Code 702413 718085 210551 211015 210658 600071 210656
Inc.vat NVD750 Vacuum Extractor 230V 343.50 Hepaflo Filter Bags NVM-4BH Pkt 10 16.99 HEPA Module 208.50 Floor Cleaning Kit 82.00 Clip-on Mobility Chassis 79.96
Ex.vat 286.25 14.16 173.75 68.33 66.63
Code 702412 211015 210657 600071 210656
NVD1500 Vacuum Extractor 230V Floor Cleaning Kit
Inc.vat 608.95 82.00
Ex.vat 507.46 68.33
Code 702681 600071
103
Industrial Extractors
Exceptional performance on both fine dusts and chippings Easy mobility thanks to large castor wheels Automatic filter cleaning for consistent performance Low noise levels Large 123 litre chipping drum Filter cartridge captures 99% of dust from 0.2-2 microns in size Steel impellor in close housing gives exceptional perfromance
Exceptional performance on both fine dusts and chippings Easy mobility thanks to large castor wheels Automatic filter cleaning for consistent performance Low noise levels Large 277 litre chipping drum Filter cartridge captures 99% of dust from 0.2-2 microns in size Steel impellor in close housing gives exceptional perfomance
Axminster Industrial Series UB-503 & UB-505 Dust Extractors

These are a different style of dust extractor suited to specialist situations. In a cabinet style, they are quiet in operation, very mobile and completely self contained. Able to handle sanding dusts due to the multi piece filter system which has a manual shaker lever. A new design of impellor combines high efficiency with very low noise levels. Waste dusts are collected in a simple tray, easy to remove and empty. The inlet port can be located on either side or at the rear for convenience. A silencer can easily be added to the air outlet to reduce the noise even further. These extractors are not really suited to machines that produce large quantities of chips (a planer or thicknesser for example) but would be a great choice for school Design and Technology rooms, CNC routers, drum or pad sanders and other specialist machines. N.B. The UB-503 requires 16A supply and the UB-505 requires a 16A 3ph supply. Model Rating Power Noise Level Overall L x W x H Weight Model Rating Power Noise Level Overall L x W x H Weight UB-503 Industrial 2,2kW (230V) 70db(A) 820 x 760 x 1,750mm 197kg UB-505 Industrial 3.75kW (415V 3ph) 82dB(A) 850 x 750 x 2,000mm 230kg
Axminster Industrial Series UB-2200VECK Cyclone Extractor

This is a mobile cyclone dust extractor suitable for small to medium sized trade workshops. Able to handle most types of wood waste except for the very finest of dusts. With a 200mm inlet this is very suitable for a ducted workshop system, or if required, you could connect to two machines using the included 2 x 100mm adaptor. Nice and quiet in operation and features automatic filter cleaning for consistent performance. This machine is a great all round extractor, able to cope with all but the largest machines. Supplied with 0.2 micron polyester cartridge filter, plastic collection bag and steel impeller. N.B. 16A supply required. Model Rating Power Noise Level Overall L x W x H Weight UB-2200ECK Industrial 1.5kW (230V 1ph) 74dB(A) @ 3m 1,250 x 750 x 1,550mm 115kg
Axminster Industrial Series UB-3300VECK Cyclone Extractor

This is a mobile cyclone dust extractor suitable for the medium to large sized trade workshops. Able to handle most types of wood waste except for the very finest of dusts. With a 200mm inlet this is very suitable for a ducted workshop system, or if required, you could connect to three machines using the included 3 x 100mm adaptor. Nice and quiet in operation and features automatic filter cleaning for consistent performance. This machine is a great all round extractor, able to cope with even large machines. Supplied with 0.2 micron polyester cartridge filter, plastic collection bag and steel impellor. N.B. 16A supply required. Model Rating Power Noise Level Overall L x W x H Weight UB-3300ECK Industrial 2.25kW (230V 1ph) 78dB(A) @ 3m 1,200 x 880 x 2,150mm 139kg
Inc.vat Ex.vat UB-2200VECK Cyclone Extractor 230V 1,579.50 1,316.25
Code 210642
UB-3300ECK Cyclone Extractor 230V
Inc.vat Ex.vat 1,869.50 1,557.92
Code 210643
UB-503 Extractor 230V UB-505 Extractor 415V
Inc.vat Ex.vat 2,059.50 1,716.25 2,749.50 2,291.25
Code 501000 501001
104
Manufacturing by tradition
A company and above all, a family, Griggio has been manufacturing high quality woodworking machinery since 1946. Founded by two brothers the company is still characterised by the same enterprising spirit and forward thinking. Under the direction of the sons of the founding fathers, Griggio has continued a process of technological development with entrepreneurial courage and a thorough knowledge of the world market.
Today, three principles guide the company: total quality, innovation and a service you can rely on. All Griggio machines are designed in house. All processes from the initial sketches right through to the first production are controlled by the Technical Department, resulting in a final product that exudes quality and innovation. Manufacturing is carried out in large, modern facilities near Venice, an area well known for industrial enterprise. The principle of total quality is controlled by the ISO 9001 Vision 2000 Certification, ensuring a strict and continuous testing regime during production. The data gathered is used to improve production methods and machinery design over the long term. Their knowledge of the market has driven Griggio to develop a customer after-sales service regime that is unrivalled. This is a real service you can rely on to maintain a high level of machine productivity.
Retailing by tradition
Here at Axminster Tool Centre, we have always tried to offer our customers the widest range of machinery possible. Machinery and equipment suitable for industrial use is for us the hardest to source, having to balance many factors such as timely supply, potential productivity, high reliability and range of choice for the customer. We have also strived to offer a prime European brand, but with markets for machinery being severely afflicted in recent years, leading to the demise of many manufacturers, this has become difficult. Like Axminster, Griggio has invested to drive itself out of the recession and now is the right time to forge a partnership together. This partnership will offer our customers a wide range of choice in their next major machine purchase. We will be displaying a broad range of Griggio machinery at our High Wycombe retail store with a smaller selection of machines at all of our other stores. Staff at each store will be trained and provided with all the information needed to help our customers make a properly informed choice to meet their requirements. Machine installations and operator training will be offered, along with scheduled maintenance contracts, if required. Our aim is to provide the widest choice of machinery to meet with your requirements, on display in our own stores and delivered to your workshop by our own staff.
Griggio Planer Thicknesser

Griggio FS530 Planer Thicknesser
The FS 530 planer/thicknesser is a very solid, accurate machine with many features to make it easy to set up and use. Superbly finished, its extra long cast iron tables give great support for large planing work and lift together for easy conversion to thicknessing. It is fitted with a long cast iron fence that tilts to 45 for bevel work. The thicknessing table has a motorised drive for the rise and fall, with a digital indication of the depth setting for accurate timber sizing. Chip extraction is efficiently managed through carefully designed hoods. Prices from 10,231 + vat (12,277 inc vat) Model Rating Power Feed Speed Cutterblock Speed Cutterblock Diameter Max Thicknesser Capacity Max Planing Width Max Depth of Cut Knives Fence Size Fence Tilting Length of Table Table Size Noise Level Dust Extraction Outlet Weight FS 530 Industrial From 5.5kW (415V 3ph) 6-12m/min 5,000rpm 120mm 3-250mm 530mm 8mm Planing, 8mm Thicknessing 4 1,100mm 90-45 2,300mm Surfacing 2,300 x 530mm Thicknessing 920 x 530mm 75dB(A) 140mm x 2 980kg
Superbly finished and accurate long cast iron tables Electric thicknessing table height adjustment with digital indicator Easy and quick conversion from surface planing to thicknessing Helicoidal infeed roller, rubber covered outfeed roller Two speed thicknessing feed drive Many options available to configure to your requirements
105
Griggio Thicknessers & Surface Planer
Spindle Moulders
Griggio T22 Spindle Moulder Griggio PSA 630 Thicknesser Griggio PS 53 Thicknesser
When sizing timber for floorboards, beams, joists or frames few machines touch a thicknesser. The PS 53 is a great choice for these jobs and requires little in the way of workshop space. Robustly constructed and designed for ease of use, the PS 53 features a four knife cutting block and a choice of work feeding speeds to give the best finish possible. Also, electric lifting of the table with a mechanical display of the thickness is a standard fitting. Several options are available to upgrade this machine to suit your work. Prices from 4,653 + vat (5,583.60 inc vat) Model Rating Power Feed Speed Cutterblock Speed Cutterblock Diameter Max Thicknesser Capacity Max Depth of Cut Knives Table Size Noise Level Dust Extraction Outlet Weight PS 53 Industrial 4kW (415V 3ph) 5-10 M/min 5,000rpm 120mm 3-250mm 6mm 4 550 x 900mm 77dB(A) 140mm 760kg This heavy duty thicknesser is perfect for heavy continuous use. Capable of sizing very large boards, it features electric table height control and continuously variable feeding speed which, combined with the high speed cutter block, achieves an extremely high standard of finish. A digital thickness table height read-out makes accurate timber sizing simple and easy to achieve. Extra timber support is given by two steel outfeed rollers coupled with a support roller set into the thicknessing table, adjustable for height from the front of the machine. Many other accessories are available to tailor this machine to your requirements. Prices from 8,374 + vat (10,048 inc vat) Model Rating Power Feed Speed Cutterblock Speed Cutterblock Diameter Max Thicknesser Capacity Max Planing Width Max Depth of Cut Knives Table Size Noise Level Dust Extraction Outlet Weight PSA 630 Industrial From 5.5kW (415V 3ph) 5-21m/min variable 5,000rpm 120mm 3-300mm 630mm 8mm 4 630 x 1,000mm 77dB(A) 160mm 810kg The Griggio T22 is a robust, high quality spindle moulder for general workshop use. It is fitted with a large, deep sectioned cast iron table to give stability and vibration free running. The fixed spindle has manual lifting and a height indicator gauge. There are five spindle speeds by means of changing belt ratios, with speed warning indicator lights. The fences are individually adjustable and are long to give excellent support to the work. A comprehensive hood and guard system makes this machine easy and safe to use. Several options are available to upgrade this machine.Prices from 3,745 + vat (4.494 inc vat) Model Rating Power Spindle Diameter Spindle Height Max Tooling Diameter Below Table Table Size Noise Level Dust Extraction Outlet Weight T22 Industrial 5.5kW (415V 3ph) 30mm 140mm 260mm 1,125 x 672mm 73.5dB(A) 2 x 120mm 490kg
Griggio T45i Spindle Moulder

A true top performing spindle moulder, the Griggio T 45i features a tilting spindle that, unusually, has a range of +45 to -45. This gives the widest possible range of moulding options for the safest operation. It is heavily built with a large, deep section cast iron table and fitted with a comprehensive fence, guards and extraction hood system. Manual spindle tilt and lifting as standard, but this machine can be tailored with many options and fittings. This is the basis of a moulding centre for any workshop.Prices from 6,455 + vat (7,746 inc vat)
Griggio PF 530 Surface Planer

This surface planer has many features such as exceptionally long tables, electric adjustment of the infeed table with digital setting control and an overhead control panel for ease of use. The infeed table is twice as long as the outfeed table, providing a high level of support to the work before the blade. This, coupled with the high speed cutter block, means that an extremely high standard of finish can be achieved. Several options are available to build this machine to suit your needs.Prices from 6,549 + vat (7,858.80 inc vat)
Model Rating Power Cutterblock Speed Cutterblock Diameter Max Planing Width Max Depth of Cut Knives Table Size Noise Level Dust Extraction Outlet Weight
PF 530 Industrial From 4kW (415V 3ph) 5,000rpm 120mm 530mm 8mm 4 530 x 2,900mm 76dB(A) 140mm 910kg
Model Rating Power Spindle Diameter Spindle Height Max Tooling Diameter Above Table Max Tooling Diameter Below Table Table Size Noise Level Dust Extraction Outlet Weight
T 45I Production 4kW (415V 3ph) 30mm 140mm 260mm (profiling tools) 350mm (tenoning tools) 260 x 90mm, 350 x 50mm 1,100 x 750mm 73.5dB(A) 2 x 120mm 580kg
106
For a personal quotation on any Griggio machine please contact our Specialist Sales Team on 0800 371822
Griggio Panel Saws
Model Rating Power Blade Dia/Bore Blade Speed Blade Tilt Scoring Blade Diameter Max Depth of Cut @ 45 Max Depth of Cut @ 90 Max Crosscut Max Ripping Width Sliding Table Size Dust Extraction Outlet Weight
Unica 350 Industrial From 4kW (415V 3ph) 350mm, 30mm 4,000rpm 0-45 100mm 80mm 118mm 3,260mm 1,050mm 3,200 x 330mm 1 x 80mm, 1 x 120mm 705kg
Griggio Unica 350 Panel Saw

The Unica 350 panel saw is a robust and highly accurate machine, based around the 3,200mm sliding table and equipped with a 350mm diameter blade. A scoring blade system is fitted, this is fully adjustable to match the main blade. An overhead crown guard system is fitted for efficient dust extraction and enhanced operator safety. The lifting and tilting of the saw blade is manually operated, with a tilt angle indicator fitted. The sliding table has a quadruple roller system with extra external support rollers to ensure a maximum cut tolerance of 0.5mm. A large crosscut extension table with a telescopic fence and two flip-over length stops is also fitted. This machine forms the basis of a family of machines with many options to suit your requirements.Prices from 7,215 + vat (8,658 inc vat)
Model Rating Power Blade Dia/Bore Blade Speed Blade Tilt Scoring Blade Diameter Max Depth of Cut @ 45 Max Depth of Cut @ 90 Max Crosscut Max Ripping Width Sliding Table Size Dust Extraction Outlet Weight
Unica 400 DIGIT Production From 5.5kW (415V 3ph) 400mm, 30mm 3,000, 4,000 & 5,000rpm 0-46 125mm 90mm 130mm 3,260mm 1,250mm 3,200 x 385mm 1 x 80mm, 1 x 120mm 1,000kg
Griggio Unica 400 DIGIT 3 Panel Saw

The Unica 400 DIGIT 3 panel saw has many features to enhance the workflow in a busy production workshop. Fitted with a three axis control, it has electronic positioning of the height and tilt of the blade with automatic correction of the blade height in relation to the tilt. The rip fence is also electronically positioned and has automatic position compensation in relation to the blade tilt. The programmer has the ability to store up to 500 working programmes, making the setting of the machine swift and accurate. The heavy duty 3,200mm sliding table is fitted with a quadruple support bearing system with additional outboard support rollers, giving a cut accuracy to within 0.5mm. A rigid crosscut table with telescopic fence is fitted. Also included is an overhead crown guard for efficient dust extraction and enhanced operator safety. Many options are available to tailor the machine to suit almost all workshop requirements. Prices from 9,307 + vat (11,168.40 inc vat)
107
Griggio Four Side Planer, Wide Belt Sander & Edgebanders

Griggio G 22 Quadro Four Side Planer
A four side planer is very useful for the production of door and window components. The Griggio G 22 is compact in size but powerful and able to handle quite large timbers. It is equally good for machining lengths of quite small batten, beading etc. A whole host of options including TERSA blocks are available, for profiling work, rebates, ect. This machine, again part of a range, is solid, simple to use and would be a great asset in any joinery workshop. Prices from 13,562.28 + vat (16,277.74 inc vat) Model Rating Power G 22 Quadro Production 1st Spindle 4kW, 2nd-3rd Spindle 5.5kW, 4th Spindle 4kW (415V 3ph) Feed Motor Power 3 x 1.65kW (415V 3ph) Feed Speed 8m/min Feed Roller Diameter 140mm Cutterblock Speed 6,000rpm Cutterblock Diameter 125mm Max Capacity 220 x 120mm Min Capacity 8 x 5mm Spindle Diameter 40mm Length of Table In Feed Table 2,000mm Dust Extraction Outlet 2 x 100mm, 2 x 120mm Weight 1,135kg
Griggio GC95 Wide Belt Sander

This wide belt sander is a mid size model from a range covering 650mm 1,100mm. Used for precision finishing of wide panels, this machine has unique features such as an innovative conveyor table lifting system, using four ground slides to ensure the highest standards of precision and strength of any sander. Automatic table positioning and a variable conveyor speed system are standard, as is a system to compensate for different belt grit densities. Each machine has at least three options of sanding heads to choose from, covering any finishing task. A host of other options are available to tailor the machine to suit your requirements. Prices from 13,891.28 + vat (16,669.53 inc vat) Model Rating Power Belt Speed Feed Speed Sanding Thickness Min/Max Belt Size Dust Extraction Outlet Weight GC95 Production 7.5kW (415V 3ph) 18 m/sec 4-20 m/min 3-160mm 950mm wide 160mm From 1000kg
Griggio GB 2/8 Edgebander

An edgebander is used for applying veneers to straight edges in PVC, ABS, laminated and solid woods. The Griggio GB 2/8 is the smallest and simplist machine in the Griggio range and has everything that the small or medium scale furniture producer would require. Griggio is famous for its edgebanders and even this entry level machine shares the fundamental features found on the largest, most complex machine. The finished edges of furniture are critical to the appearance of the product, the GB 2/8 is versatile, accurate and easy to use. Prices from 11,771.03 + vat Model GB 2/8 (14,125.23 inc vat) Rating Industrial Power Installed Motor Power 7kW (415V, 3ph) Weight 1,020kg
Griggio Manual Edgebander

Workpiece remains stationary, the edgebender travels around the edge Can be used as a conventional hot melt straight line edgebander Compatible with PVC, ABS, wood veneer and melamine Tape thickness 0.4 to 3mm, workpiece thickness 10 to 40mm Minimum concave or convex radius 25mm Complete kit including trimmers, guillotines and metal storage case As easy to use as any other hand held power tool, this Griggio Manual Edgebander would be ideal for a small joinery workshop. With a wide range of applications and able to handle boards up to 40mm thick you can edgeband straight, convex or concave work. As it is portable you could take it on site for finishing fixed installations such as counter tops, bar areas and display sets. The glue temperature and speed are controlled electronically, with a sensor to lower the glue temperature when the machine is at idle for a short period. The kit includes, workbench mounting kit, four, triple suction clamp heads plus brackets to make a portable clamp stand, a 1/4 electric trimmer for producing curved edges, hand guillotines for cutting the banding and a hand trimmer to remove any waste material. All housed in a sturdy wheeled metal box. Easy and fast to set up, a professional finsh can be achieved every time. Model Power Temperature GB M Compact 185W 120-220C
GB M Edgebander
Inc.vat Ex.vat 1,390.80 1159.00
Code 501039
108
For a personal quotation on any Griggio machine please contact our Specialist Sales Team on 0800 371822

Axminster 02 - Industrial Machines - p85-p108

Uploaded by

Copyright:

Available Formats

Axminster 02 - Industrial Machines - p85-p108

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Axminster 02 - Industrial Machines - p85-p108

Uploaded by

Copyright:

Available Formats

Industrial Panel Saws

Axminster Industrial Series P30/2200 Panel Saws

Overhead Crown Guard Kit

Code 953440 953441 951525 951526 951527

Overhead Crown Guard kit

Order online www.axminster.co.uk/industrial

Industrial Panel Saws

Axminster Industrial Series P305/2500 & P305/3200 Panel Saw

Overhead Crown Guard Kit

Overhead Crown Guard kit

Order freephone 0800 371822

Industrial Panel Saws

Axminster Industrial Series D405A/3200 Panel Saw

Work hold down clamp

Code 953444 951529 951530 951531 951532 951533 951534 951535

Order online www.axminster.co.uk/industrial

Industrial Vertical Panel Saws

Code 110067 340134 950684 950685

Safety Speed Cut H4 & H5 Panel Saws

H4 Vertical Panel Saw 240V

Inc.vat Ex.vat 2,199.50 1,832.92

H5 Vertical Panel Saw 240V

Inc.vat Ex.vat 2,519.50 2,099.58

Order freephone 0800 371822

Vertical Panel Saws Accessories

Sliding Dust kit for C4, H4 & H5 Panel Saws

Extension Set for C4, H4 & H5 Panel Saws

Wheel Set for C4, H4 & H5 Panel Saws

Folding Stand for C4 Panel Saw

Folding Stand (C4 Only)

Quick Stops for C4, H4 & H5 Panel Saws

Quick Stop for C4 Quick Stop for H4 & H5

Inc.vat 172.96 207.50

Ex.vat 144.13 172.92

Code 341174 500466

Fixed Stand for C4, H4 & H5 Panel Saws

Midway Fences for C4, H4 & H5 Panel Saws

Hold Down Bar for C4, H4 & H5 Panel Saws

Midway Fence for C4 Midway Fence for H4 & H5

Inc.vat 352.50 403.50

Ex.vat 293.75 336.25

Code 110069 500467

Hold Down Bar for C4 & H4 Hold Down Bar for H5

Inc.vat 157.00 166.00

Ex.vat 130.83 138.33

Code 500462 500465

Order online www.axminster.co.uk/industrial

Industrial Rip Saws

Axminster Industrial Series TSCE-12R 305mm Table Saw

Code 700158 600807 951524 951525 951526 951527

Smooth & precise hand wheels with locking facility

Sliding table folds away when not in use

Order freephone 0800 371822

Industrial Rip Saws

Axminster Industrial Series TSCE-400R-1 400mm Table Saw

Order online www.axminster.co.uk/industrial

General Purpose Saw Blade

General Purpose Saw Blade