Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    Measurment Records - Big End Bearing Bore

    Uploaded by

    swiatekpiotrwp.pl

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Measurment Records - Big End Bearing Bore

    Uploaded by

    swiatekpiotrwp.pl
    9 views1 page

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views1 page

    Measurment Records - Big End Bearing Bore

    Uploaded by

    swiatekpiotrwp.pl

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Services, Wärtsilä Finland Oy

    Section Valid for Ref. Date Issue Document No. Page

    11 Connecting rod W32, W34SG, WFI-S 10-Mar-2015 1(1)


    W34DF, W32GD 08 3211V017

    Installation name: Engine No: Engine ref. type:

    Engine type: Application: Ambient temp: °C Fuel type: Engine rhrs:

    Big end bearing bore


    NOTE: The connecting rod shank and bearing housing must be mounted
    together and the screws tightened before measuring.
    Tighten the M27 screws in this order: First (1), then (2).
    Hydraulic press. when tightening the M27 screws, to be tightened in
    three steps: first step 400 bar, second step 850 bar and third step 850 bar.
    Max. hydraulic pressure when loosening the M27 screws: 870 bar.

    Nominal diameter without shells:


    Allowed minimum diameter: 324.90 mm
    Maximum allowed difference between Dmax and Dmin: 0.15 mm

    Reference diameter (mm):

    Gudgeon pin bearing bush mounted


    Wear limit: When visible bronze lining wear areas meet, i.e. B = 0.
    Wear pattern shown in view A–A.

    Measurement tool(s):

    Cylinder number
    Bank:
    1 2 3 4 5 6 7 8 9 10
    Big end bearing bore D1 to D5 (deviation in 1 / 100 mm)
    L
    D1
    R
    L
    D2
    R
    L
    D3
    R
    L
    D4
    R
    L
    D5
    R
    Max deviation:
    Con. rod running hours
    bef. measuring:
    Manufact. no:
    Drawing No. or part No:
    Gudgeon pin bearing bush mounted
    Measurement (B) mm:
    Bush running hours bef.
    measuring:
    Manufact. No:
    Remarks

    Date of measurement: Place: Name:

    Wärtsilä Finland Oy P.O. Box 252 (Tarhaajantie 2) Telecop. +358 10 709 1847 Tel. +358 10 709 0000 Business ID 0773744-3
    Services, Vaasa FIN-65101 Vaasa, Finland Telecop. +358 10 709 1380 Registered Office: Vaasa
    Wärtsilä Finland Oy P.O. Box 50 (Stålarminkatu 45) Telecop. +358 10 709 3279 Tel. +358 10 709 0000
    Services, Turku FIN-20811 Turku, Finland Telecop. +358 10 709 3410

    You might also like