DATA SHEET

Model MTB-ASME
Vertical Pre-Piped
Bladder Tanks

Features
n Pre-piped configurations with a wide selection of propor-
tioner sizes, including the SKUM TPW-150 MK2 for closed-
head sprinkler systems
n Includes all components required for use in an automatic or
manually operated system
n UL Listed and FM Approved for use with various SKUM
proportioners and foam concentrates
n 175 psi (12.1 bar) maximum allowable working pressure
(design pressure)
n Nominal capacities up to 7,570 liters with larger tanks avail-
010119
able on special request
n Choice of Standard or Corrosion-Resistant Epoxy exterior The proportioner and carbon steel spool pipes are factory
paint, available in a variety of colors installed with the direction of flow from left to right when
viewed from the piping side of the tank. Spool pipes are
n Optional sight gauge and thermal pressure relief valves
sized to match the proportioner selected and lengths are a
available
minimum of five pipe diameters upstream and two and a half
pipe diameters downstream of the proportioner. The supplied
spool pipes are grooved for use with grooved couplings.
Application Adapters to facilitate use of flanged connections are available
The SKUM MTB-ASME Vertical Pre-Piped Bladder Tank is a separately.
complete balanced pressure proportioning system inclusive
The pre-piped trim consists of brass pipe with bronze manual
of a proportioner and all of the valves and piping required
ball valves and includes all valves required for manual or
for either manual or automatic operation. These tanks are
automatic operation. All manual valves are clearly identified
intended for use where is it desirable to have the proportion-
by permanently attached nameplates and can be secured in
ing system pre-assembled with fixed dimensions known,
position with included ring pins and tamper seals. To facilitate
eliminating field assembly of loose components and uncer-
automatic operation, an SKUM Hydraulic Concentrate Control
tainty in the layout of the foam equipment room. SKUM
Valve is factory installed in the foam concentrate discharge
Vertical Pre-Piped Bladder Tanks can be used with most
piping.
SKUM foam concentrates and any suitable discharge device
to complete the foam system. Protective Coatings
All SKUM Vertical Pre-Piped Bladder Tanks feature a high-
SKUM Vertical Pre-Piped Bladder Tanks require only a pres-
build epoxy internal coating. Exterior paint is available
surized water supply for operation. No other external power
in two grades: Standard and Corrosion-Resistant Epoxy
is required. As with standard SKUM bladder tanks, they can
(Epoxy CR). Paint systems used on SKUM Vertical
be used in a variety of applications, including aircraft hangars,
Pre-Piped Bladder Tanks have been subjected to and
foam-water sprinkler systems, truck loading racks, and
passed salt spray corrosion testing per ASTM B117-90.
helipads.
Standard paint has been tested to a minimum of 240 hours
in accordance with UL 162, UL 139, and FM 5130. Epoxy CR
paint has been tested to a minimum of 3,000 hours and is
Description suitable for marine and offshore use.
The SKUM Vertical Pre-Piped Bladder Tank is a steel pressure Support and Mounting
vessel which stores foam concentrate contained within an
Vertical tanks are supported on four legs with foot plates and
elastomeric bladder. The concentrate is discharged from the
slotted holes for mounting. Refer to dimensional drawings for
tank by incoming water applying pressure to the bladder. This
mounting hole spacing.
applied energy is transferred to the foam concentrate, supply-
ing pressurized foam concentrate to the proportioner.
Vertical Tanks
Trim Piping and Connections
Diameter Nominal Capacity Mounting Slot Size
SKUM Vertical Pre-Piped Bladder Tanks are available in
models up to 2,000 gal (7,570 L). All models are piped for 24 in. to 42 in.
50 gal to 400 gal 3/4 in. x 1 1/4 in.
top discharge of foam concentrate and include a stainless (610 mm to
(379 L to 1,514 L) (19 mm x 32 mm)
steel SKUM Hydraulic Concentrate Control Valve. Note: For 1,067 mm)
automatic operation, the sensing line to the SKUM Hydraulic 48 in. to 72 in.
Concentrate Control Valve must be piped in the field. 500 gal to 2,000 gal 1 in x 1 1/4 in.
(1,219 mm to
(1,893 L to 7,570 L) (25 mm x 32 mm)
1,829 mm)

Tyco Park / Grimshaw Lane / Newton Heath / Manchester / M40 2WL Tel:
+44 (0) 161 259 4000 / www.tfppemea.com
Copyright © 2017 Tyco Fire Products LP. All rights reserved. / FDS-2016073-03
Description (Continued) Every tank bears a permanently affixed ASME data plate
showing the National Board number which identifies the
Support and Mounting (Continued) tank as compliant with ASME code Section VIII, Division 1 for
All included piping and valves are supported by the tank. unfired pressure vessels.
No additional support or bracing of piping is required under
normal circumstances. Included piping is not designed SKUM Vertical Pre-Piped Bladder Tanks 200 gal (757 L) and
to support loading from external piping connections. larger are CE marked in conformance with the European
Appropriate piping supports should be used on field piping to Pressure Equipment Directive, 2014/68/EU. Under European
avoid damage. Pressure Equipment Directive 2014/68/EU, tanks smaller than
200 gal (757 L) are acceptable based on sound engineering
Each tank is fitted with two lifting lugs designed to lift the practices of ASME code and cannot be CE marked.
empty weight of the tank with a minimum safety factor of 2
when utilizing appropriate slings rigged at a lifting angle of
not less than 30 degrees from horizontal. All lifting lugs have Operation and Maintenance
a minimum clear hole size of 2 in. (50 mm).
Refer to the SKUM Bladder Tank Operation and Maintenance
Internal Components Manual for detailed procedures on installation, operation,
SKUM Vertical Pre-Piped Bladder Tanks contain an elas- inspection, and maintenance. A printed copy of this manual is
tomeric bladder that has been approved for use by included with every tank.
Underwriter’s Laboratory and FM Approvals with various
SKUM foam concentrates. All SKUM Vertical Pre-Piped
Bladder Tanks utilize a center tube to facilitate agent Valve Position Information
discharge. Center tubes are constructed of materials compat-
ible with SKUM foam concentrates. Vertical tanks utilize a
Valve Description Normal Valve Position
single center tube.
Valve* Manual Automatic
Sight Gauge Description
No. System System
A sight gauge is available as an optional accessory for SKUM
Manual Foam Concentrate
Vertical Pre-Piped Bladder Tanks for estimation of the fill 1. N.C.** N.O.***
Shutoff
level in the tank. The sight gauge is equipped with a clear 1
in. (25 mm). PVC tube. The sight gauge is shipped as a loose Water Supply
2. N.C. N.O.
item and must be assembled on the tank during installation. Shut-Off

Thermal Relief Valve Sight Gauge

3. N.C. N.C.
Shut-Off
A thermal relief valve is available as an option for SKUM
bladder tanks. A thermal relief valve should be used when 4. Tank Shell Vent Valve N.C. N.C.
the bladder tank will be stored in an isolated/hydraulically 5. Bladder Vent Valve N.C. N.C.
locked condition in order to relieve pressure due to thermal
expansion. This valve is factory set to 175 psi (12 bar) and it 6. Tank Shell Drain Valve N.C. N.C.
is recommended that the design pressure of the system be 7. Bladder Drain/Fill Valve N.C. N.C.
maintained at least 5 psi (0.34 bar) or 10% below the set pres-
Automatic Foam Concentrate
sure of the valve to avoid seat leakage and early valve main- 8. N.O. N.C.
Isolation
tenance. This valve is NOT a substitute for a properly sized
ASME pressure relief valve to protect the entire system from 9. Isolation Valve N.C. N.C.
overpressure.
*Reference dimensional drawings for valve locations
ASME Information **N.C. – Normally Closed
SKUM Vertical Pre-Piped Bladder Tanks are designed and ***N.O. – Normally Open
constructed in accordance with the latest revisions to ASME
Dimension and Installation Notes:
Code Section VIII, Division 1 for unfired pressure vessels with
1. Dimensions listed are approximate and subject to change without
a maximum allowable working pressure (MAWP) of 175 psi
notice.
(12.1 bar) and tested to the pressure specified by the appli-
2. Foam Concentrate Discharge Pipe
cable codes and standards. Tanks designed to ASME code
– Tank sizes 50 gal to 400 gal (189 L to 1,514 L):
are tested to at least 230 psi (15.9 bar). CE marked tanks are 2 in. Female NPT or Grooved
tested to at least 255 psi (17.6 bar). All SKUM bladder tanks – Tank sizes 500 gal to 2,000 gal (1,893 L to 7,570 L):
are constructed of steel complying with ASME specifications. 3 in. Female NPT or Grooved
Tank heads are 2:1 elliptical unless otherwise specified. 3. Water Inlet Pipe
– Tank sizes 50 gal to 400 gal (189 L to 1,514 L):
All SKUM Vertical Pre-Piped Bladder Tanks include a perma- 2 in. Female NPT or Grooved
nently affixed stainless steel ASME data plate. At a minimum, – Tank sizes 500 gal to 2,000 gal (1,893 L to 7,570 L):
3 in. Female NPT or Grooved
the data plate includes the following information: year of
manufacture, maximum allowable working pressure (MAWP), 4. Rooms or buildings intended to house a bladder tank should have
accommodations for the removal of the internal center tube(s).
nominal volume, part number, National Board number,
Center tubes are approximately the full height and/or width of the
minimum material thickness, minimum design metal tempera- bladder tank.
ture (MDMT), and type of head used.
5. Spool pipe sizes correspond to the proportioner size.
6. Spool pipes are supplied ready to pipe using grooved fittings.
Adapters for use with flange connections available separately.
Approvals and Certifications
SKUM Vertical Pre-Piped Bladder Tanks are UL Listed and
FM Approved for use with various SKUM foam concentrates.
The UL mark and/or FM Approval diamond are applied at
the factory along with a label identifying the SKUM foam
concentrate for use in the tank.
Dimensional Information (Reference Dimensional Drawings)
Vertical Propor-
Tank Weight
Bladder tioner
(Empty)
Tank Size A B C D E F G
Part No. Size in. lb. (kg) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
50 gal 2 557 (253) 71.6 (1,819) 33.2 (843) 50 (1,270) 23.0 (584) 44.1 (1,120) 22.0 (559) 29.9 (760)
444187 (190 L) 582 (264)
2 1/2 71.6 (1,819) 33.2 (843) 50 (1,270) 23.0 (584) 44.1 (1,120) 22.0 (559) 30.1 (765)
2 681 (309) 98.6 (2,504) 33.2 (843) 50 (1,270) 23.0 (584) 44.1 (1,120) 23.1 (587) 29.9 (760)
100 gal 2 1/2 706 (320) 98.6 (2,504) 33.2 (843) 50 (1,270) 23.0 (584) 44.1 (1,120) 23.1 (587) 30.1 (765)
444188 789 (358)
(379 L) 3 98.6 (2,504) 33.2 (843) 50 (1,270) 23.0 (584) 44.1 (1,120) 23.1 (587) 30.4 (772)
4 905 (411) 98.6 (2,504) 33.2 (843) 50 (1,270) 23.0 (584) 44.1 (1,120) 23.1 (587) 30.9 (785)
3 979 (444) 98.8 (2,510) 39.2 (996) 50 (1,270) 23.0 (584) 49.9 (1,268) 26.0 (660) 38.1 (968)
150 gal
444189 4 1,094 (496) 98.8 (2,510) 39.2 (996) 50 (1,270) 23.0 (584) 49.9 (1,268) 26.0 (660) 38.6 (980)
(568 L) 1,095 (497)
6 98.8 (2,510) 39.2 (996) 50 (1,270) 23.0 (584) 49.9 (1,268) 26.0 (660) 39.7 (1,008)
3 1,086 (493) 118.3 (3,005) 39.2 (996) 50 (1,270) 23.0 (584) 49.9 (1,268) 27.0 (686) 38.1 (968)
200 gal 4 1,206 (547) 118.3 (3,005) 39.2 (996) 50 (1,270) 23.0 (584) 49.9 (1,268) 27.0 (686) 38.6 (980)
444190 6 1,208 (548) 118.3 (3,005) 39.2 (996) 50 (1,270) 23.0 (584) 49.9 (1,268) 27.0 (686) 39.7 (1,008)
(757 L)
WR 1,204 (546) 118.3 (3,005) 39.2 (996) 50 (1,270) 23.0 (584) 49.9 (1,268) 27.0 (686) 39.7 (1,008)
3 1,626 (738) 97.0 (2,464) 51.2 (1,301) 65 (1,651) 28.6 (726) 61.9 (1,572) 31.5 (800) 38.1 (968)
300 gal 4 1,752 (795) 97.0 (2,464) 51.2 (1,301) 65 (1,651) 28.6 (726) 61.9 (1,572) 31.5 (800) 38.6 (980)
444191 1,763 (800)
(1,136 L) 6 97.0 (2,464) 51.2 (1,301) 65 (1,651) 28.6 (726) 61.9 (1,572) 31.5 (800) 39.7 (1,008)
WR 1,758 (797) 97.0 (2,464) 51.2 (1,301) 65 (1,651) 28.6 (726) 61.9 (1,572) 31.5 (800) 39.7 (1,008)
4 1,996 (905) 117.0 (2,972) 51.2 (1,301) 65 (1,651) 28.6 (726) 61.8 (1,570) 31.5 (800) 38.6 (980)
400 gal 6 2,009 (911) 117.0 (2,972) 51.2 (1,301) 65 (1,651) 28.6 (726) 61.8 (1,570) 31.5 (800) 39.7 (1,008)
444192
(1,514 L) WR 2,004 (909) 117.0 (2,972) 51.2 (1,301) 65 (1,651) 28.6 (726) 61.8 (1,570) 31.5 (800) 39.7 (1,008)
4 2,292 (1,040) 115.9 (2,944) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 38.6 (980)
500 gal 6 2,310 (1,048) 115.9 (2,944) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 39.7 (1,008)
444193 2,658 (1,206)
(1,893 L) 8 115.9 (2,944) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 40.7 (1,034)
WR 2,305 (1,046) 115.9 (2,944) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 39.7 (1,008)
4 2,503 (1,135) 130.9 (3,325) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 38.6 (980)
600 gal 6 2,522 (1,144) 130.9 (3,325) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 39.7 (1,008)
444194 2,873 (1,303)
(2,271 L) 8 130.9 (3,325) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 40.7 (1,034)
WR 2,517 (1,142) 130.9 (3,325) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 39.7 (1,008)
4 2,712 (1,230) 145.8 (3,703) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 38.6 (980)
700 gal 6 2,732 (1,239) 145.8 (3,703) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 39.7 (1,008)
444195 3,086 (1,400)
(2,650 L) 8 145.8 (3,703) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 40.7 (1,034)
WR 2,727 (1,237) 145.8 (3,703) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 39.7 (1,008)
4 2,951 (1,339) 161.8 (4,110) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 38.6 (980)
800 gal 6 2,972 (1,348) 161.8 (4,110) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 39.7 (1,008)
444196 3,329 (1,510)
(3,028 L) 8 161.8 (4,110) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 40.7 (1,034)
WR 2,968 (1,346) 161.8 (4,110) 57.2 (1,453) 65 (1,651) 32.6 (828) 68.3 (1,735) 35.1 (892) 39.7 (1,008)
4 3,253 (1,476) 130.2 (3,307) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 45.3 (1,151)
900 gal 6 3,273 (1,485) 130.2 (3,307) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 46.3 (1,176)
444197 3,623 (1,643)
(3,407 L) 8 130.2 (3,307) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 47.3 (1,201)
WR 3,268 (1,482) 130.2 (3,307) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 46.3 (1,176)
4 3,456 (1,568) 139.9 (3,554) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 45.3 (1,151)
1,000 gal 6 3,476 (1,577) 139.9 (3,554) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 46.3 (1,176)
444198 3,828 (1,736)
(3,785 L) 8 139.9 (3,554) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 47.3 (1,201)
WR 3,471 (1,574) 139.9 (3,554) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 46.3 (1,176)
4 3,754 (1,703) 154.1 (3,914) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 45.3 (1,151)
1,200 gal 6 3,776 (1,713) 154.1 (3,914) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 46.3 (1,176)
444199 4,130 (1,873)
(4,542 L) 8 154.1 (3,914) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 47.3 (1,201)
WR 3,771 (1,710) 154.1 (3,914) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 46.3 (1,176)
4 4,176 (1,894) 173.3 (4,402) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 45.3 (1,151)
1,400 gal 6 4,199 (1,905) 173.3 (4,402) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 46.3 (1,176)
444200 4,557 (2,067)
(5,299 L) 8 173.3 (4,402) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 47.3 (1,201)
WR 4,194 (1,902) 173.3 (4,402) 69.2 (1,758) 65 (1,651) 32.6 (828) 80.3 (2,040) 40.9 (1,039) 46.3 (1,176)
4 5,164 (2,342) 144.6 (3,673) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 45.3 (1,151)
1,600 gal 6 5,185 (2,352) 144.6 (3,673) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 46.3 (1,176)
444201 5,539 (2,512)
(6,056 L) 8 144.6 (3,673) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 47.3 (1,201)
WR 5,180 (2,350) 144.6 (3,673) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 46.3 (1,176)
4 5,571 (2,527) 156.8 (3,983) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 45.3 (1,151)
1,800 gal 6 5,593 (2,537) 156.8 (3,983) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 46.3 (1,176)
444202 5,949 (2,698)
(6,813 L) 8 156.8 (3,983) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 47.3 (1,201)
WR 5,588 (2,535) 156.8 (3,983) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 46.3 (1,176)
4 6,197 (2,811) 175.1 (4,448) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 45.3 (1,151)
2,000 gal 6 6,221 (2,822) 175.1 (4,448) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 46.3 (1,176)
444203 6,581 (2,985)
(7,570 L) 8 175.1 (4,448) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 47.3 (1,201)
WR 6,216 (2,820) 175.1 (4,448) 82.2 (2,088) 65 (1,651) 32.6 (828) 93.2 (2,367) 47.4 (1,204) 46.3 (1,176)
Note: WR denotes a wide range proportioner
Dimensional Information (Continued)
Vertical
Bladder H J K L M Dia N
Tank Size in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
50 gal 19.6 (498) 16.6 (422) 8.3 (211) 3 (76) Dia 3/4 x 1 1/4 (Dia 19 x 32) 24 (610)
(190 L) 19.6 (498) 16.6 (422) 8.3 (211) 3 (76) Dia 3/4 x 1 1/4 (Dia 19 x 32) 24 (610)
19.6 (498) 16.6 (422) 8.3 (211) 3 (76) Dia 3/4 x 1 1/4 (Dia 19 x 32) 24 (610)
100 gal 19.6 (498) 16.6 (422) 8.3 (211) 3 (76) Dia 3/4 x 1 1/4 (Dia 19 x 32) 24 (610)
(379 L) 19.6 (498) 16.6 (422) 8.3 (211) 3 (76) Dia 3/4 x 1 1/4 (Dia 19 x 32) 24 (610)
19.6 (498) 16.6 (422) 8.3 (211) 3 (76) Dia 3/4 x 1 1/4 (Dia 19 x 32) 24 (610)
25.2 (640) 21.2 (539) 10.6 (269) 4 (102) Dia 3/4 x 1 1/4 (Dia 19 x 32) 30 (762)
150 gal
25.2 (640) 21.2 (539) 10.6 (269) 4 (102) Dia 3/4 x 1 1/4 (Dia 19 x 32) 30 (762)
(568 L) 25.2 (640) 21.2 (539) 10.6 (269) 4 (102) Dia 3/4 x 1 1/4 (Dia 19 x 32) 30 (762)
25.2 (640) 21.2 (539) 10.6 (269) 4 (102) Dia 3/4 x 1 1/4 (Dia 19 x 32) 30 (762)
200 gal 25.2 (640) 21.2 (539) 10.6 (269) 4 (102) Dia 3/4 x 1 1/4 (Dia 19 x 32) 30 (762)
(757 L) 25.2 (640) 21.2 (539) 10.6 (269) 4 (102) Dia 3/4 x 1 1/4 (Dia 19 x 32) 30 (762)
25.2 (640) 21.2 (539) 10.6 (269) 4 (102) Dia 3/4 x 1 1/4 (Dia 19 x 32) 30 (762)
34.8 (884) 28.8 (732) 14.4 (366) 6 (152) Dia 3/4 x 1 1/4 (Dia 19 x 32) 42 (1,067)
300 gal 34.8 (884) 28.8 (732) 14.4 (366) 6 (152) Dia 3/4 x 1 1/4 (Dia 19 x 32) 42 (1,067)
(1,136 L) 34.8 (884) 28.8 (732) 14.4 (366) 6 (152) Dia 3/4 x 1 1/4 (Dia 19 x 32) 42 (1,067)
34.8 (884) 28.8 (732) 14.4 (366) 6 (152) Dia 3/4 x 1 1/4 (Dia 19 x 32) 42 (1,067)
34.8 (884) 28.8 (732) 14.4 (366) 6 (152) Dia 3/4 x 1 1/4 (Dia 19 x 32) 42 (1,067)
400 gal
34.8 (884) 28.8 (732) 14.4 (366) 6 (152) Dia 3/4 x 1 1/4 (Dia 19 x 32) 42 (1,067)
(1,514 L) 34.8 (884) 28.8 (732) 14.4 (366) 6 (152) Dia 3/4 x 1 1/4 (Dia 19 x 32) 42 (1,067)
39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
500 gal 39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
(1,893 L) 39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
600 gal 39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
(2,271 L) 39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
700 gal 39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
(2,650 L) 39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
800 gal 39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
(3,028 L) 39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
39.1 (993) 33.1 (841) 16.6 (422) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 48 (1,219)
48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
900 gal 48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
(3,407 L) 48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
1,000 gal 48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
(3,785 L) 48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
1,200 gal 48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
(4,542 L) 48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
1,400 gal 48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
(5,299 L) 48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
48.4 (1,229) 42.4 (1,077) 21.2 (539) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 60 (1,524)
57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
1,600 gal 57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
(6,056 L) 57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
1,800 gal 57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
(6,813 L) 57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
2,000 gal 57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
(7,570 L) 57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
57.4 (1,458) 51.4 (1,306) 25.7 (653) 6 (152) Dia 1 x 1 1/4 (Dia 25 x 32) 73 (1,854)
Vertical Pre-Piped Bladder Tank
8 F B
5

2 1
A

6 3
7
G

E 9
D
C
L

DIA N
FIGURE 1
010116

Option 1: Sight Gauge Included

Sight Gauge
Option 2: No Sight Gauge

H
Thermal Option 1: No Thermal Relief Valve
Relief Valve 6
Option 2: Thermal Relief Valve Included
Option 1: Domestic Packaging
Packaging
Option 2: Export Crating
Ordering Notes:
M
K 1. Tanks will be marked as UL Listed and/or FM Approved based
on the foam concentrate type specified. Orders for SKUM
J pre-piped bladder tanks will not be processed unless foam
concentrate type is specified as this information is required to
Ordering Information properly manufacture the proportioner.
2. Orders for SKUM Vertical Pre-Piped Bladder Tanks will not
Please specify the following when ordering: be processed if a proportioner size is not specified. See the
n Part Number for required bladder tank size and Ordering Information Part Number Table for standard tank size
and proportioner combinations.
orientation (See Ordering Part Numbers Table)
3. For all other options categories, if an option is not specified,
n Foam concentrate type to be used 1
Option 1 will be used as the default.
4. UL Listing of paint systems is color-specific. The Red, Blue,
n One option from each of the following categories :
2,3
and Yellow color shade options shown above are UL Listed.
Contact TFPP Technical Services to determine if other color
Proportioner Size/Style (See Ordering Table) shades are UL Listed.
Option 1 2 in. (50 mm) DN50 Threaded 5. If “Other” is selected, the specific paint shade required must be
Option 2 2 1/2 in. (65 mm) DN65 Threaded supplied. Availability of the paint shade selected may impact
lead time.
3 in. (80 mm) DN80 Between the
Option 3 6. Set pressure is 175 psi (12.1 bar). Set pressure cannot exceed
Flange (wafer-style)
the design pressure of the tank per ASME code.
4 in. (100 mm) DN100 Between the Flange
Option 4
(wafer-style) Expediting Service
6 in. (150 mm) DN150 Between the Flange Selected sizes of SKUM bladder tanks, including most
Option 5
(wafer-style) of the standard options listed above, are available
8 in. (200 mm) DN200 Between the Flange for optional expediting service. These tanks can be
Option 6
(wafer-style) shipped in three weeks or less after order confirmation.
Option 7 SKUM TPW-150 MK2 See the list of ordering part numbers for the specific
sizes eligible for this service. Due to availability, expe-
Option 1: Standard dited tanks are only available in RAL3001 Red. Contact
Exterior Paint
Option 2: CR Epoxy Tyco Fire Protection Products Technical Services or a
Option 1: Red (RAL 3001) SKUM Regional Sales Manager for additional informa-
Exterior Paint Option 2: Blue (RAL 5019) tion and limitations on this service.
Color 4 Option 3: Yellow (RAL 1021)
Option 4: Other 5
Ordering Information (Continued)
Bladder Tank Ordering Part Numbers

Vertical Bladder Tanks Standard Proportioner Options

Capacity Part Expediting 2 in. 2.5 in. 3 in. 4 in. 6 in. 8 in. TPW 150
gal (L) Number Available (50 mm) (65 mm) (80 mm) (100 mm) (150 mm) (200 mm) MK2
50 (189) 444187 √ √ √
100 (379) 444188 √ √ √ √ √
150 (568) 444189 √ √ √ √
200 (757) 444190 √ √ √ √
300 (1,136) 444191 √ √ √ √ √
400 (1,514) 444192 √ √ √
500 (1,893) 444193 √ √ √ √ √
600 (2,271) 444194 √ √ √ √
700 (2,650) 444195 √ √ √ √
800 (3,028) 444196 √ √ √ √
900 (3,407) 444197 √ √ √ √
1,000 (3,785) 444198 √ √ √ √
1,200 (4,542) 444199 √ √ √ √
1,400 (5,299) 444200 √ √ √ √
1,600 (6,056) 444201 √ √ √ √
1,800 (6,813) 444202 √ √ √ √
2,000 (7,570) 444203 √ √ √ √

Flange Adapters Touch Up Paint

Tyco Fire Protection Products Figure 71 Flange Adapters are Touch up paint for Red (RAL 3001) equipment is available in a
available to adapt the grooved fittings supplied with SKUM convenient 7 ounce spray can. Touch up paint for other colors
pre-piped bladder tanks to flanged piping for field installa- is not available in spray cans. Contact Tyco Fire Protection
tion. The sizes listed below have a maximum pressure rating Products Technical Services for touch up paint in other colors.
of 300 psi (20.7 bar). The flange adapter body is ductile iron
and utilizes a Grade “E” EPDM gasket. Finished with Red (RAL Red (RAL 3001) Touch Up Paint – Part Number: 405581.
3000) non-lead paint.
Custom Engineering
Recommended Flange SKUM pre-piped bladder tanks can be customized to accom-
Adapter Size Mating Bolts modate a variety of special requirements, including but not
limited to ladders, platforms, alternate materials of construc-
Bolt Torque
tion, higher design pressures, space constraints, larger capaci-
ANSI Size Range Approx. Ordering
ties, and seismic rated tanks.
Grooved Flange Dia x L lb-ft Weight Part
in. (mm) (DIN) in. Qty. (N·m) lb (kg) Number Contact Tyco Fire Protection Products Technical Services or
2 110 – 140 a SKUM Regional Sales Manager for additional information
2 (50) 5/8 x 3 4 3.0 (1.4) 7120TS or to obtain a quote. Note: UL Listed tanks are limited to
(DN50) (149 – 190)
maximum capacities of 3,000 gal (11,356 L) for vertical tanks
2 1/2 110 – 140
2 1/2 (65) 5/8 x 3 4 5.0 (2.3) 7125TS with maximum working pressures of 175 psi to 250 psi (12.1 bar
(DN65) (149 – 190)
to 17.2 bar). FM Approved tanks are limited to maximum
3 110 – 140 capacities of 2,000 gal (7,570 L).
3 (80) 5/8 x 3 4 5.6 (2.5) 7130TS
(DN80) (149 – 190) Note: The converted values provided in this document are for nominal
4 220 – 250 reference only and do not reflect an actual measurement.
4 (100) 3/4 x 3 1/2 8 7.0 (3.2) 7140TS
(DN100) (298 – 339) SKUM and the product names listed in this material are marks and/or
registered marks. Unauthorized use is strictly prohibited.
6 220 – 250
6 (150) 3/4 x 3 1/2 8 10.0 (4.5) 7160TS
(DN150) (298 – 339)
8 220 – 250
8 (200) 3/4 x 3 1/2 8 16.6 (7.5) 7180TS
(DN200) (298 – 339)