DESIGN PARAMETER

ULS (KN) SLS (KN)

445 mm TOP PLATE O/O
LOAD CASE VERTICAL HORIZONTAL VERTICAL HORIZONTAL
391 mm BOLT C/C V(max) V(min) HL HT V(max) V(min) HL HT

337 mm TOP PLATE WIDTH CASE - 1 2250 800 112.5 112.5 1500 1050 75 75
397 mm TOP PLATE LENGTH
CASE - 2 2250 800 112.5 112.5 1500 1050 75 75
310 mm SS PLATE WIDTH
370 mm SS PLATE LENGTH
DETAIL-A CASE - 3 2250 800 112.5 112.5 1500 1050 75 75
DISTRIBUTION PLATE 302 mm Ø SADDLE LONG. ± 50 LONG. ± 50
485 X 437 X 25 mm MOVEMENT (mm)
343 mm BOLT C/C NOT IN DECG SCOPE TRANS. ± 20 TRANS. ± 20
ROTATION (rad.) 0.015 0.015
302 mm Ø SADDLE GRADE OF MATERIAL AT TOP (GIRDER) E250

22 mm GRADE OF MATERIAL AT BOTTOM (PEDESTAL) M40

TOP PLATE THICK. 90 mm 12 8 WASHER MILD STEEL IRC:83 (PART-III)
TOTAL HEIGHT 11 4 DOWELS MILD STEEL IS:2062 Gr. E250
4 10 8 BOLTS M16 Gr. 8.8 IS:1367

3 9 2 TRANSPORT BRACKET MILD STEEL -

14 mm
8 1 TOP PLATE MILD STEEL IS:2062 Gr. E350
14mm FLANGE
7 1 S.S. SHEET STAINLESS STEEL AISI:316
FLANGE
6 1 D-SM SHEET D-SM IRC:83 (PART-III)
10
5 1 PISTON MILD STEEL IS:2062 Gr. E350
11
4 1 DUST SEAL FLEXIBLE FOAM IRC:83 (PART-III)

3 AS PER INTERNAL SEAL POM IRC:83 (PART-III)

302 mm Ø WALL O/O 2 1 ELASTOMER PAD NATURAL RUBBER IRC:83 (PART-III)

302 mm Ø BOTTOM BASE 1 1 BOTTOM POT CAST STEEL IS:1030-Gr:340 - 570 W

356 mm PCD
410 mm Ø BOTTOM POT O/O 356 mm PCD S. NO. QTY. DESCRIPTION MATERIAL SPECIFICATION
410 mm Ø BOTTOM POT O/O MATERIAL DESCRIPTION PER BEARING
CROSS SECTION X-X
CROSS SECTION Y-Y NOTE -
1. THIS DESIGN & DRAWING IS THE SOLE PROPERTY OF DECG
INTERNATIONAL. IT SHOULD NOT BE COPIED OR
04 Nos. BOLT OF COMMUNICATED TO ANY PERSON WITHOUT THE WRITTEN
M16 X55 Length APPROVAL OF PROPRIETORS.
@TOP 2. ALL DIMENSION ARE IN MM.
HALF TOP 3. DESIGN AS PER IRC:83-2018 (PART-III).
4. ALL MANUFACTURING SHOULD BE CONFIRM AS PER IRC
Y SPECIFICATION.

7
6
5
4
3
2
X X 1 09-03-2024 0 INITIAL SUBMISSION J.T. A.K.S.
S. NO. DATE Rev. No. DESCRIPTION DRAWN CHECKED
6 D-SM Ø210 mm X 5mm Thik.
2.5 mm PROJECTED
TYPE - POT CUM PTFE FREE BEARING TOTAL QTY.
8
7 SS SHEET 1.5 mm Thik. SPAN - 36 M, Bridge-LC-83BT - 30 M, 24M
42 Nos.

6 2 25 mm TITLE GAD FOR FREE BEARING (DFRB - 225 T )

3 DIMENSIONAL VIEW
PROJECT MUGALSARAI-GAYA SECTION ON VILLAGE ROAD.
22 mm 22 mm CHITTORPUR
CLIENT DEDICATED FREIGHT CORRIDOR CORPORATION OF INDIA LTD.
5 mm 12 mm
04 Nos. BOLT OF CONTRACTOR JCL INFRA PVT LTD
HALF BOTTOM Y M16 X45 Length WITH
8mm
Ø32 x 160 DOWEL 29.5mm CONSULTANT --
@BOTTOM 20
W=12mm
30 mm
DRAWING NO. DECG/JCL/BH/2024/03/2021317
PLAN 18 mm
WALL Ht. DATE 09-03-2024 DRAWN J.T.
21 mm
SHEET N0. 05 of 10 SCALE CHECKED P.K.
14 mm 14 mm
TRANSVERSE DIRECTION

REV. R0 N.T.S. APPROVED A.K.S.

MANUFACTURER / DESIGNER
ELASTOMER
1 DECG INTERNATIONAL
OF BRIDGE

Ø260mm X 18mm Thik. 2

Crop. office: 69C, Sector A, Bhopal-Hoshamgabad Road (NH46)

Mandideep, Raisen- 462 046 , Madhya Pradesh
DETAIL-A Telephone : 9109120039, 9811350648
TRAFFIC DIRECTION OF E-mail : [email protected], [email protected]
BRIDGE Website : www.decgintl.com