Lembar data produk

Spesifikasi

variable speed drive, Altivar 12,

1.5kW, 2hp, 200 to 240V, 3 phases,
with heat sink
ATV12HU15M3

Main
Range Of Product Altivar 12

Product Or Component Type Variable speed drive

Disklaimer: Dokumentasi ini tidak ditujukan sebagai pengganti dan tidak untuk digunakan untuk menentukan kesesuaian atau keandalan produk ini untuk aplikasi pengguna
Product Specific Application Simple machine

Mounting Mode Cabinet mount

Communication Port Protocol Modbus

Supply Frequency 50/60 Hz +/- 5 %

[Us] Rated Supply Voltage 200...240 V - 15...10 %

Nominal Output Current 7.5 A

Motor Power Hp 2 hp

Motor Power Kw 1.5 kW

Motor Power Hp 2 hp

Emc Filter Without EMC filter

Ip Degree Of Protection IP20

Complementary
Discrete Input Number 4

Discrete Output Number 2

Analogue Input Number 1

Analogue Output Number 1

Relay Output Number 1

Physical Interface 2-wire RS 485

Connector Type 1 RJ45

Continuous Output Current 7.5 A at 4 kHz

Method Of Access Server Modbus serial

Speed Drive Output Frequency 0.5…400 Hz

Speed Range 1…20

Sampling Duration 20 ms, tolerance +/- 1 ms for logic input

10 ms for analogue input

Linearity Error +/- 0.3 % of maximum value for analogue input

Frequency Resolution Analog input: converter A/D, 10 bits

Display unit: 0.1 Hz

Time Constant 20 ms +/- 1 ms for reference change

6 Jun 2024 1
Transmission Rate 9.6 kbit/s
19.2 kbit/s
38.4 kbit/s

Transmission Frame RTU

Number Of Addresses 1…247

Data Format 8 bits, configurable odd, even or no parity

Communication Service Read holding registers (03) 29 words

Write single register (06) 29 words
Write multiple registers (16) 27 words
Read/write multiple registers (23) 4/4 words
Read device identification (43)

Type Of Polarization No impedance

4 Quadrant Operation Possible False

Asynchronous Motor Control Quadratic voltage/frequency ratio

Profile Voltage/frequency ratio (V/f)
Sensorless flux vector control

Maximum Output Frequency 4 kHz

Transient Overtorque 150…170 % of nominal motor torque depending on drive rating and type of motor

Acceleration And Deceleration Linear from 0 to 999.9 s

Ramps U
S

Motor Slip Compensation Adjustable

Preset in factory

Switching Frequency 2...16 kHz adjustable

4...16 kHz with derating factor

Nominal Switching Frequency 4 kHz

Braking To Standstill By DC injection

Brake Chopper Integrated False

Line Current 11.1 A at 100 V (heavy duty)

9.3 A at 120 V (heavy duty)

Maximum Input Current 9.3 A

Maximum Output Voltage 240 V

Apparent Power 3.9 kVA at 240 V (heavy duty)

Maximum Transient Current 11.2 A during 60 s (heavy duty)

12.4 A during 2 s (heavy duty)

Network Frequency 50...60 Hz

Relative Symmetric Network 5%

Frequency Tolerance
Prospective Line Isc 5 kA

Base Load Current At High 7.5 A

Overload
Power Dissipation In W Forced cooling: 73.0 W

With Safety Function Safely False

Limited Speed (Sls)
With Safety Function Safe Brake False
Management (Sbc/Sbt)
With Safety Function Safe False
Operating Stop (Sos)
With Safety Function Safe False
Position (Sp)
With Safety Function Safe False
Programmable Logic
With Safety Function Safe Speed False
Monitor (Ssm)

2 6 Jun 2024
With Safety Function Safe Stop 1 False
(Ss1)
With Sft Fct Safe Stop 2 (Ss2) False

With Safety Function Safe Torque False

Off (Sto)
With Safety Function Safely False
Limited Position (Slp)
With Safety Function Safe False
Direction (Sdi)
Protection Type Line supply overvoltage
Line supply undervoltage
Overcurrent between output phases and earth
Overheating protection
Short-circuit between motor phases
Against input phase loss in three-phase
Thermal motor protection via the drive by continuous calculation of I²t

Tightening Torque 1.2 N.m

Insulation Electrical between power and control

Quantity Per Set Set of 1

Width 105 mm

Height 143 mm

Depth 131.2 mm

Net Weight 1.2 kg

Environment
Operating Altitude <= 1000 m without derating
> 1000...3000 m with current derating 1 % per 100 m

Operating Position Vertical +/- 10 degree

Product Certifications NOM

CSA
C-Tick
UL
GOST
RCM
KC

Marking CE

Standards UL 508C
UL 618000-5-1
EN/IEC 61800-5-1
EN/IEC 61800-3

Assembly Style With heat sink

Electromagnetic Compatibility Electrical fast transient/burst immunity test level 4 conforming to EN/IEC 61000-4-4
Electrostatic discharge immunity test level 3 conforming to EN/IEC 61000-4-2
Immunity to conducted disturbances level 3 conforming to EN/IEC 61000-4-6
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to
EN/IEC 61000-4-3
Surge immunity test level 3 conforming to EN/IEC 61000-4-5
Voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11

Environmental Class (During Class 3C3 according to IEC 60721-3-3

Operation) Class 3S2 according to IEC 60721-3-3

Maximum Acceleration Under 150 m/s² at 11 ms

Shock Impact (During Operation)
Maximum Acceleration Under 10 m/s² at 13...200 Hz
Vibrational Stress (During
Operation)
Maximum Deflection Under 1.5 mm at 2...13 Hz
Vibratory Load (During Operation)
Volume Of Cooling Air 14.8 m3/h

Overvoltage Category Class III

6 Jun 2024 3
Regulation Loop Adjustable PID regulator

Electromagnetic Emission Radiated emissions environment 1 category C2 conforming to EN/IEC 61800-3 2...16
kHz shielded motor cable
Conducted emissions with additional EMC filter environment 1 category C1
conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <5 m
Conducted emissions with additional EMC filter environment 1 category C2
conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <20 m
Conducted emissions with additional EMC filter environment 2 category C3
conforming to EN/IEC 61800-3 4...12 kHz shielded motor cable <20 m

Vibration Resistance 1 gn (f = 13…200 Hz) conforming to EN/IEC 60068-2-6

1.5 mm peak to peak (f = 3…13 Hz) - drive unmounted on symmetrical DIN rail -
conforming to EN/IEC 60068-2-6

Shock Resistance 15 gn conforming to EN/IEC 60068-2-27 for 11 ms

Relative Humidity 5…95 % without condensation conforming to IEC 60068-2-3

5…95 % without dripping water conforming to IEC 60068-2-3

Noise Level 50 dB

Pollution Degree 2

Ambient Air Transport -25…70 °C

Temperature
Ambient Air Temperature For -10…50 °C without derating
Operation 50…60 °C with current derating 2.2 % per °C

Ambient Air Temperature For -25…70 °C

Storage

Packing Units
Unit Type Of Package 1 PCE

Number Of Units In Package 1 1

Package 1 Height 20.000 cm

Package 1 Width 18.000 cm

Package 1 Length 20.000 cm

Package 1 Weight 1.515 kg

Unit Type Of Package 2 P06

Number Of Units In Package 2 30

Package 2 Height 75.000 cm

Package 2 Width 60.000 cm

Package 2 Length 80.000 cm

Package 2 Weight 58.450 kg

Contractual warranty
Warranty 18 months

4 6 Jun 2024
Keberlanjutan
Green PremiumTM label adalah komitmen Schneider Electric untuk memberikan produk dengan
performa lingkungan terbaik di kelasnya. Green Premium menjanjikan kepatuhan pada peraturan
terbaru, transparansi pada dampak lingkungan, serta produk melingkar dan rendah CO2.
Panduan untuk menilai keberlanjutan produk adalah laporan resmi yang menjelaskan standar
label lingkungan global dan bagaimana menafsirkan deklarasi lingkungan.
Pelajari lebih lanjut tentang Green Premium arrow2_right
Panduan untuk menilai keberlanjutan produk arrow2_right

Kinerja kesejahteraan

 Mercury Free

 Rohs Exemption Information Yes

Reach Regulation REACh Declaration

Eu Rohs Directive Pro-active compliance (Product out of EU RoHS legal scope)

China Rohs Regulation China RoHS declaration

Weee The product must be disposed on European Union markets following specific waste
collection and never end up in rubbish bins

6 Jun 2024 5
Lembar data produk ATV12HU15M3

Dimensions Drawings

Dimensions

Drive without EMC Conformity Kit

Dimensions in mm
b c

143 131.2

Dimensions in in.
b c

5.63 5.16

Drive with EMC Conformity Kit

Dimensions in mm
b1

189.3

Dimensions in in.
b1

7.45

6 6 Jun 2024
Lembar data produk ATV12HU15M3

Mounting and Clearance

Mounting Recommendations

Clearance for Vertical Mounting

Mounting Type A

Mounting Type B

Remove the protective cover from the top of the drive.

Mounting Type C

Remove the protective cover from the top of the drive.

6 Jun 2024 7
Lembar data produk ATV12HU15M3

Connections and Schema

Three-Phase Power Supply Wiring Diagram

A1 Drive

KM1 Contactor (only if a control circuit is needed)

Q1 Circuit breaker

8 6 Jun 2024
Lembar data produk ATV12HU15M3

Recommended Schemes

2-Wire Control for Logic I/O with Internal Power Supply

LI1 : Forward

LI• : Reverse

A1 : Drive

3-Wire Control for Logic I/O with Internal Power Supply

LI1 : Stop

LI2 : Forward

LI• : Reverse

A1 : Drive

Analog Input Configured for Voltage with Internal Power Supply

(1) 2.2 kΩ…10 kΩ reference potentiometer

A1 : Drive

Analog Input Configured for Current with Internal Power Supply

(2) 0-20 mA 4-20 mA supply

A1 : Drive

6 Jun 2024 9
Lembar data produk ATV12HU15M3

Connected as Positive Logic (Source) with External 24 vdc Supply

(1) 24 vdc supply

A1 : Drive

Connected as Negative Logic (Sink) with External 24 vdc supply

(1) 24 vdc supply

A1 : Drive

10 6 Jun 2024
Lembar data produk ATV12HU15M3

Performance Curves

Torque Curves

1: Self-cooled motor: continuous useful torque (1)

2: Force-cooled motor: continuous useful torque

3: Transient overtorque for 60 s

4: Transient overtorque for 2 s

5: Torque in overspeed at constant power (2)

(1) For power ratings ≤ 250 W, derating is 20% instead of 50% at very low frequencies.

(2) The nominal motor frequency and the maximum output frequency can be adjusted from 0.5 to 400 Hz. The
mechanical overspeed capability of the selected motor must be checked with the manufacturer.

6 Jun 2024 11