AZ 700 Exam4Training Dumps

Exam4
Training
QUESTION & ANSWER
Latest and valid Q&A

Once Fail, Full Refund
http://www.exam4training.com
The safer , easier way to help you pass any IT exams.
Exam : AZ-700
Title : Designing and Implementing

Microsoft Azure Networking
Solutions
Version : V8.02
1 / 42
1. Topic 1, Litware. Inc Case Study 1
Overview
Litware. Inc. is a financial company that has a main datacenter in Boston and 20 branch offices across the
United States. Users have Android, iOS, and Windows 10 devices.
Existing Environment:
Hybrid Environment
The on-prernises network contains an Active Directory forest named litwareinc.com that syncs to an Azure
Active Directory (Azure AD) tenant named litwareinc.com by usinq Azure AD Connect.
All the offices connect to a virtual network named Vnetl by using a Site-to-Site VPN connection.
Azure Environment
Litware has an Azure subscription named Sub1 that is linked to the litwareinc.com Azure AD tenant.
Sub1 contains resources in the East US Azure region as shown in the following table.
There is bidirectional peering between Vnet1 and Vnet2. There is bidirectional peering between Vnet1
and Vnet3. Currently, Vnet2 and Vnet3 cannot communicate directly.
Requirements:
Business Requirements
Litware wants to minimize costs whenever possible, as long as all other requirements are met.
Virtual Networking Requirements

Litware identifies the following virtual networking requirements:
* Direct the default route of 0.0.0.0/0 on Vnet2 and Vnet3 to the Boston datacenter over an ExpressRoute
circuit.
2 / 42
* Ensure that the records in the cloud.litwareinc.com zone can be resolved from the on-premises
locations.
* Automatically register the DNS names of Azure virtual machines to the cloud.litwareinc.com zone.
* Minimize the size of the subnets allocated to platform-managed services.
* Allow traffic from VMScaleSet1 to VMScaleSet2 on the TCP port 443 only.
Hybrid Networking Requirements

Litware identifies the following hybrid networking requirements:
* Users must be able to connect to Vnet1 by using a Point-to-Site (P2S) VPN when working remotely.
Connections must be authenticated by Azure AD.
* Latency of the traffic between the Boston datacenter and all the virtual networks must be minimized.
* The Boston datacenter must connect to the Azure virtual networks by using an ExpressRoute FastPath
connection.
* Traffic between Vnet2 and Vnet3 must be routed through Vnet1.
PaaS Networking Requirements

Litware identifies the following networking requirements for platform as a service (PaaS):
* The storage1 account must be accessible from all on-premises locations without exposing the public
endpoint of storage1.
* The storage2 account must be accessible from Vnet2 and Vnet3 without exposing the public endpoint of
storage2.
HOTSPOT
You need to implement a P2S VPN for the users in the branch office. The solution must meet the hybrid
networking requirements.
What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct
selection is worth one point.
Answer:
2.DRAG DROP
3 / 42
You need to prepare Vnet1 for the deployment of an ExpressRoute gateway. The solution must meet the
hybrid connectivity requirements and the business requirements.
Which three actions should you perform in sequence for Vnet1? To answer, move the appropriate actions
from the list of actions to the answer area and arrange them in the correct order.
Answer:
3.You need to provide connectivity to storage1. The solution must meet the PaaS networking
requirements and the business requirements.
What should you include in the solution?
A. a service endpoint
B. Azure Front Door
C. a private endpoint
D. Azure Traffic Manager
Answer: D
4.You need to connect Vnet2 and Vnet3. The solution must meet the virtual networking requirements and
the business requirements.
Which two actions should you include in the solution? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. On the peerings from Vnet2 and Vnet3, select Use remote gateways.
B. On the peering from Vnet1, select Allow forwarded traffic.
C. On the peering from Vnet1, select Use remote gateways.
D. On the peering from Vnet1, select Allow gateway transit.
E. On the peerings from Vnet2 and Vnet3, select Allow gateway transit.
Answer: B,D
5. Topic 2, Contoso Case Study 2
Overview
This is a case study. Case studies are not timed separately. You can use as much exam time as you
4 / 42
would like to complete each case. However, there may be additional case studies and sections on this
exam. You must manage your time to ensure that you are able to complete all questions included on this
exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided
in the case study. Case studies might contain exhibits and other resources that provide more information
about the scenario that is described in the case study. Each question is independent of the other
questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers
and to make changes before you move to the next section of the exam. After you begin a new section,
you cannot return to this section.
To start the case study

To display the first question in this case study, click the Next button. Use the buttons in the left pane to
explore the content of the case study before you answer the questions. Clicking these buttons displays
information such as business requirements, existing environment, and problem statements. If the case
study has an All Information tab. note that the information displayed is identical to the information
displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to
return to the question.
Existing Environment:
Azure Network Infrastructure
Contoso has an Azure Active Directory (Azure AD) tenant named contoso.com.
The Azure subscription contains the virtual networks shown in the following table.
Vnet1 contains a virtual network gateway named GW1.
Azure Virtual Machines

The Azure subscription contains virtual machines that run Windows Server 2019 as shown in the
following table.
5 / 42
The NSGs are associated to the network interfaces on the virtual machines. Each NSG has one custom
security rule that allows RDP connections from the internet. The firewall on each virtual machine allows
ICMP traffic.
An application security group named ASG1 is associated to the network interface of VM1.
Azure Private DNS Zones

The Azure subscription contains the Azure private DNS zones shown in the following table.
Zone1.contoso.com has the virtual network links shown in the following table.
Other Azure Resources

The Azure subscription contains additional resources as shown in the following table.
Requirements:
Virtual Network Requirements
Contoso has the following virtual networks requirements:
* Create a virtual network named Vnet6 in West US that will contain the following resources and
configurations:
Two container groups that connect to Vnet6
Three virtual machines that connect to Vnet6
Allow VPN connections to be established to Vnet6
Allow the resources in Vnet6 to access KeyVault1, DB1, and Vnet1 over the Microsoft backbone network
* The virtual machines in Vnet4 and Vnet5 must be able to communicate over the Microsoft backbone
6 / 42
network.
* A virtual machine named VM-Analyze will be deployed to Subnet1. VM-Analyze must inspect the
outbound network traffic from Subnet2 to the internet.
Network Security Requirements

Contoso has the following network security requirements:
* Configure Azure Active Directory (Azure AD) authentication for Point-to-Site (P2S) VPN users.
* Enable NSG flow logs for NSG3 and NSG4.
* Create an NSG named NSG10 that will be associated to Vnet1/Subnet1 and will have the custom
inbound security rules shown in the following table.
* Create an NSG named NSG11 that will be associated to Vnet1/Subnet2 and will have the custom
outbound security rules shown in the following table.
5.HOTSPOT
You create NSG10 and NSG11 to meet the network security requirements.
For each of the following statements, select Yes it the statement is true. Otherwise, select No. NOTE:
Each correct selection is worth one point.
Answer:
7 / 42
6.HOTSPOT
In which NSGs can you use ASG1 and to which virtual machine network interfaces can you associate
ASG1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is
worth one point.
Answer:
7.What should you implement to meet the virtual network requirements for the virtual machines that
connect to Vnet4 and Vnet5?
A. a private endpoint
B. a virtual network peering
C. a private link service
D. a routing table
E. a service endpoint
Answer: E
8.CORRECT TEXT
You are implementing the Virtual network requirements for Vnet6.
What is the minimum number of subnets and service endpoints you should create? To answer, select the
8 / 42
appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
2, 4
9.HOTSPOT
You are implementing the virtual network requirements for VM Analyze.
What should you include in a custom route that is linked to Subnet2? To answer, select the appropriate
options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
9 / 42
10.HOTSPOT
You need to meet the network security requirements for the NSG flow logs.
Which type of resource do you need, and how many instances should you create? To answer, select the
Answer:
11.HOTSPOT
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE:
10 / 42
Answer:
12 Topic 3, Mix Questions
HOTSPOT
Your company has 10 instances of a web service. Each instance is hosted in a different Azure region and
is accessible through a public endpoint.
The development department at the company is creating an application named App1. Every 10 minutes.
App1 will use a list of end points and connect to the first available endpoint.
You plan to use Azure Traffic Manager to maintain the list of endpoints.
You need to configure a Traffic Manager profile that will minimize the impact of DNS caching.
What should you configure? To answer, select the appropriate options in the answer area. NOTE: Each
correct selection is worth one point.
Answer:
11 / 42
13.You are configuring two network virtual appliances (NVAs) in an Azure virtual network. The NVAs will
be used to inspect all the traffic within the virtual network.
You need to provide high availability for the NVAs. The solution must minimize administrative effort.
A. Azure Standard Load Balancer
B. Azure Traffic Manager
C. Azure Application Gateway
D. Azure Front Door
Answer: C
14.You have an Azure subscription that contains the public IP addresses shown in the following table.
You plan to deploy a NAT gateway named NAT1.

Which public IP addresses can be used as the public IP address for NAT1?
A. IP3 and IP5 only
B. IP5 only
C. IP1, IP3, and IP5 only
D. IP3 only
E. IP2 and IP4 only
Answer: C
15.DRAG DROP
You have an Azure subscription that contains the resources shown in the following table.
The IP Addresses settings for Vnet1 are configured as shown in the exhibit.
12 / 42
You need to ensure that you can integrate WebApp1 and Vnet1.
Which three actions should you perform in sequence before you can integrate WebApp1 and Vnet1? To
answer, move the appropriate actions from the list of actions to the answer area and arrange them in the
correct order.
Answer:
16.You fail to establish a Site-to-Site VPN connection between your company's main office and an Azure
virtual network.
You need to troubleshoot what prevents you from establishing the IPsec tunnel.
Which diagnostic log should you review?
A. IKEDiagnosticLog
B. GatewayDiagnosticLog
C. TunnelDiagnosticLog
13 / 42
D. RouteDiagnosticLog
Answer: B
17.You have an Azure virtual network named Vnet1.

You need to ensure that the virtual machines in Vnet1 can access only the Azure SQL resources in the
East US Azure region. The virtual machines must be prevented from accessing any Azure Storage
resources.
Which two outbound network security group (NSG) rules should you create? Each correct answer
presents part of the solution. NOTE: Each correct selection is worth one point.
A. an allow rule that has the IP address range of Vnet1 as the source and destination of Sql.EastUS
B. a deny rule that has a source of VirtualNetwork and a destination of Sql
C. a deny rule that has a source of VirtualNetwork and a destination of 168.63.129.0/24
D. a deny rule that has the IP address range of Vnet1 as the source and destination of Storage
Answer: C,D
18.You have an application named App1 that listens for incoming requests on a preconfigured group of 50
TCP ports and UDP ports.
You install App1 on 10 Azure virtual machines.
You need to implement load balancing for App1 across all the virtual machines. The solution must
minimize the number of load balancing rules.
A. Azure Standard Load Balancer that has Floating IP enabled
B. Azure Application Gateway V2 that has multiple listeners
C. Azure Application Gateway v2 that has multiple site hosting enabled
D. Azure Standard Load Balancer that has high availability (HA) ports enabled
Answer: A
19.HOTSPOT
You have the Azure environment shown in the exhibit.
14 / 42
You have virtual network peering between Vnet1 and Vnet2. You have virtual network peering between
Vnet4 and Vnet5.
The virtual network peering is configured as shown in the following table.
15 / 42
Answer:
20.You have an Azure subscription that contains the public IPv4 addresses shown in the following table.
You plan to create a load balancer named LB1 that will have the following settings:
* Name: LB1
* Location: West US
* Type: Public
* SKU: Standard
Which public IPv4 addresses can be used by LB1?
A. IP1 and IP3 only
B. IP3 only
C. IP3 and IP5 only
D. IP2only
E. IP1, IP2. IP3. IP4. and IP5
F. IP1, IP3, IP4, and 1P5 only
Answer: E
21.You have an Azure Front Door instance that has a single frontend named Frontend1 and an Azure
Web Application Firewall (WAF) policy named Policy1. Policy1 redirects requests that have a header
containing "string1" to https://www.contoso.com/redirect1. Policy1 is associated to Frontend1.
You need to configure additional redirection settings. Requests to Frontend1 that have a header
containing "string2" must be redirected to https://www.contoso.com/redirect2.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each
A. Create a custom rule.
B. Configure a managed rule.
C. Create a frontend host.
D. Create a policy.
E. Create an association.
16 / 42
F. Add a custom rule to Policy1.

Answer: A,B,E
22.You have an Azure subscription that is linked to an Azure Active Directory (Azure AD) tenant named
contoso.onmicrosoft.com.
The subscription contains the following resources:
* An Azure App Service app named App1
* An Azure DNS zone named contoso.com
* An Azure private DNS zone named private.contoso.com
* A virtual network named Vnet1
You create a private endpoint for App1. The record for the endpoint is registered automatically in Azure
DNS.
You need to provide a developer with the name that is registered in Azure DNS for the private endpoint.
What should you provide?
A. app1.privatelink.azurewebsites.net
B. app1.contoso.com
C. app1.contoso.onmicrosoft.com
D. app1.private.contoso.com
Answer: A
23.Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have
more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure subscription that contains the following resources:
* A subnet named Subnet1 in Vnet1
* A virtual machine named VM1 that connects to Subnet1
* Three storage accounts named storage1, storage2, and storage3
You need to ensure that VM1 can access storage1. VM1 must be prevented from accessing any other
storage accounts.
Solution: You configure the firewall on storage1 to only accept connections from Vnet1.
Does this meet the goal?
A. Yes
B. No
Answer: B
24.Your company has an on-premises network and three Azure subscriptions named Subscription1,
Subscription2, and Subscription3.
The departments at the company use the Azure subscriptions as shown in the following table.
17 / 42
All the resources in the subscriptions are in either the West US Azure region or the West US 2 Azure
region.
You plan to connect all the subscriptions to the on-premises network by using ExpressRoute.
What is the minimum number of ExpressRoute circuits required?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: A
25.HOTSPOT
You configure a route table named RT1 that has the routes shown in the following table.
You have an Azure virtual network named Vnet1 that has the subnets shown in the following table.
You have the resources shown in the following table.
Vnet1 connects to an ExpressRoute circuit.

The on-premises router advertises the following routes:
* 0.0.0.0/0
* 10.0.0.0/16
18 / 42
Answer:
26.You have an Azure Virtual Desktop deployment that has 500 session hosts.
All outbound traffic to the internet uses a NAT gateway.
During peak business hours, some users report that they cannot access internet resources.
In Azure Monitor, you discover many failed SNAT connections.
You need to increase the available SNAT connections.
What should you do?
A. Add a public IP address.
B. Bind the NAT gateway to another subnet.
C. Deploy Azure Standard Load Balancer that has outbound rules.
Answer: A
27.HOTSPOT
You have an Azure subscription.
You have the on-premises sites shown the following table.
You plan to deploy Azure Virtual WAN.

You are evaluating Virtual WAN Basic and Virtual WAN Standard.
Which type of Virtual WAN can you use for each site? To answer, select the appropriate options in the
answer area. NOTE: Each correct selection is worth one point.
19 / 42
Answer:
28.HOTSPOT
You have the hybrid network shown in the Network Diagram exhibit.
You have a peering connection between Vnet1 and Vnet2 as shown in the Peering-Vnet1-Vnet2 exhibit.
20 / 42
You have a peering connection between Vnet1 and Vnet3 as shown in the Peering -Vnet1-Vnet3 exhibit.
21 / 42
Answer:
22 / 42
29.You have an Azure application gateway for a web app named App1. The application gateway allows
end-to-end encryption.
You configure the listener for HTTPS by uploading an enterprise signed certificate.
You need to ensure that the application gateway can provide end-to-end encryption for App1.
What should you do?
A. Set Listener type to Multi site.
B. Increase the Unhealthy threshold setting in the custom probe.
C. Upload the public key certificate to the HTTP settings.
D. Enable the SSL profile for the listener.
Answer: D
30.You have an Azure virtual network and an on-premises datacenter.

You need to implement a Site-to-Site VPN connection between the datacenter and the virtual network.
Which two resources should you create? Each correct answer presents part of the solution. NOTE: Each
A. a virtual network gateway
B. Azure Firewall
C. a local network gateway
D. Azure Web Application Firewall (WAF)
E. an on-premises data gateway
F. an Azure application gateway
G. a user-defined route
Answer: C,G
31.You are planning an Azure Point-to-Site (P2S) VPN that will use OpenVPN.
Users will authenticate by using an on premises Active Directory domain.
Which additional service should you deploy to support the VPN authentication?
A. a certification authority (CA)
B. a RADIUS server
C. an Azure key vault
D. Azure Active Directory (Azure AD) Application Proxy
Answer: D
32.You have an Azure virtual network that contains the subnets shown in the following table.
23 / 42
You deploy an Azure firewall to AzureFirewallSubnet. You route all traffic from Subnet2 through the
firewall.
You need to ensure that all the hosts on Subnet2 can access an external site located at
https://*.contoso.com.
What should you do?
A. Create a network security group (NSG) and associate the NSG to Subnet2.
B. In a firewall policy, create an application rule.
C. In a firewall policy, create a DNAT rule.
D. In a firewall policy, create a network rule.
Answer: A
33.HOTSPOT
You have the network security groups (NSGs) shown in the following table.
In NSG1, you create inbound rules as shown in the following table.
You have the Azure virtual machines shown in the following table.
NSG2 has only the default rules configured.

24 / 42
Answer:
34.You have an Azure Front Door instance named FD1 that is protected by using Azure Web Application
Firewall (WAF).
FD1 uses a frontend host named app1.contoso.com to provide access to Azure web apps hosted in the
East US Azure region and the West US Azure region.
You need to configure FD1 to block requests to app1.contoso.com from all countries other than the United
States.
What should you include in the WAF policy?
A. a frontend host association
B. a managed rule set
C. a custom rule that uses a rate limit rule
D. a custom rule that uses a match rule
Answer: C
35.Your company has offices in New York and Amsterdam. The company has an Azure subscription. Both
offices connect to Azure by using a Site-to-Site VPN connection.
The office in Amsterdam uses resources in the North Europe Azure region. The office in New York uses
resources in the East US Azure region.
You need to implement ExpressRoute circuits to connect each office to the nearest Azure region. Once
the ExpressRoute circuits are connected, the on-premises computers in the Amsterdam office must be
able to connect to the on-premises servers in the New York office by using the ExpressRoute circuits.
Which ExpressRoute option should you use?
A. ExpressRoute Local
25 / 42
B. ExpressRoute FastPath
C. ExpressRoute Direct
D. ExpressRoute Global Reach
Answer: A
36.Azure virtual networks in the East US Azure region as shown in the following table.
The virtual networks are peered to one another. Each virtual network contains four subnets.
You plan to deploy a virtual machine named VM1 that will inspect and route traffic between all the subnets
on both the virtual networks.
What is the minimum number of IP addresses that you must assign to VM1?
A. 1
B. 2
C. 4
D. 8
Answer: B
37.You have an Azure subscription that contains the virtual networks shown in the following table.
You plan to deploy an Azure firewall named AF1 to RG1 in the West US Azure region.
To which virtual networks can you deploy AF1?
A. Vnet1 only
B. Vnet1 and Vnet2 only
C. Vnet1, Vnet2, and Vnet4 only
D. Vnet1 and Vnet4 only
E. Vnet1, Vnet2. Vnet3, and Vnet4
Answer: C
You have an Azure application gateway that has Azure Web Application Firewall (WAF) enabled.
You configure the application gateway to direct traffic to the URL of the application gateway.
You attempt to access the URL and receive an HTTP 403 error. You view the diagnostics log and discover
26 / 42
the following error.
You need to ensure that the URL is accessible through the application gateway.
Solution: You configure a custom cookie and an exclusion rule.
A. Yes
B. No
Answer: A
39.You have five virtual machines that run Windows Server. Each virtual machine hosts a different web
app.
You plan to use an Azure application gateway to provide access to each web app by using a hostname of
www.contoso.corn and a different URL path for each web app, for example:
https://www.contoso.com/app1.
You need to control the flow of traffic based on the URL path.
What should you configure?
A. rules
B. rewrites
C. HTTP settings
D. listeners
Answer: A
27 / 42
Solution: You disable the WAF rule that has a ruleld of 920300.
A. Yes
B. No
Answer: A
41.DRAG DROP
You have two Azure subscriptions named Subscnption1 and Subscription2. Subscription1 contains a
virtual network named Vnet1. Vnet1 contains an application server. Subscription2 contains a virtual
network named Vnet2.
You need to provide the virtual machines in Vnet2 with access to the application server in Vnet1 by using
a private endpoint.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.
Answer:
28 / 42
42.You have a website that uses an FQDN of www.contoso.com. The DNS record tor www.contoso.com
resolves to an on-premises web server.
You plan to migrate the website to an Azure web app named Web1. The website on Web1 will be
published by using an Azure Front Door instance named ContosoFD1.
You build the website on Web1.
You plan to configure ContosoFD1 to publish the website for testing.
When you attempt to configure a custom domain for www.contoso.com on ContosoFD1, you receive the
error message shown in the exhibit.
You need to test the website and ContosoFD1 without affecting user access to the on-premises web
server.
Which record should you create in the contoso.com DNS domain?
A. a CNAME record that maps www.contoso.com to ContosoFD1.azurefd.net
B. a CNAME record that maps www.contoso.com to Web1.contoso.com
C. a CNAME record that maps afdverify.www.contoso.com to ContosoFD1.azurefd.net
D. a CNAME record that maps afdverify.www.contoso.com to afdverify.ContosoFD1.azurefd.net
Answer: A
43.DRAG DROP
You have an Azure Front Door instance named FrontDoor1.
You deploy two instances of an Azure web app to different Azure regions.
You plan to provide access to the web app through FrontDoor1 by using the name app1.contoso.com.
You need to ensure that FrontDoor1 is the entry point for requests that use app1.contoso.com.
29 / 42
Which three actions should you perform in sequence? To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.
Answer:
44.You have the Azure resources shown in the following table.
You configure storage1 to provide access to the subnet in Vnet1 by using a service endpoint.
You need to ensure that you can use the service endpoint to connect to the read-only endpoint of
storage1 in the paired Azure region.
What should you do first?
A. Configure the firewall settings for storage1.
B. Fail over storage1 to the paired Azure region.
C. Create a virtual network in the paired Azure region.
D. Create another service endpoint.
Answer: A
45.HOTSPOT
You need to connect an on-premises network and art Azure environment. The solution must use
ExpressRoute and support failing over to a Site-to Site VPN connection if there is an ExpressRoute
failure.
30 / 42
Answer:
46.HOTSPOT
You have the Azure App Service app shown in the App Service exhibit.
The VNet Integration settings for as12 are configured as shown in the Vnet Integration exhibit.
31 / 42
The Private Endpoint connections settings for as12 are configured as shown in the Private Endpoint
connections exhibit.
32 / 42
Answer:
47.HOTSPOT
You have an Azure subscription that contains two virtual networks named Vnet1 and Vnet2.
You register a public DNS zone named fabrikam.com.
The zone is configured as shown in the Public DNS Zone exhibit.
33 / 42
You have a private DNS zone named fabrikam.com.

The zone is configured as shown in the Private DNS Zone exhibit.
34 / 42
You have a virtual network link configured as shown in the Virtual Network Link exhibit.
35 / 42
Answer:
48.CORRECT TEXT
You have two Azure App Service instances that host the web apps shown the following table.
You deploy an Azure application gateway that has one public frontend IP address and two backend pools.
You need to publish all the web apps to the application gateway. Requests must be routed based on the
HTTP host headers.
What is the minimum number of listeners and routing rules you should configure? To answer, select the
Answer:
1, 2
36 / 42

Solution: You create a WAF policy exclusion request headers that contain 137.135.10.24.
Does this meet the goat?
A. Yes
B. No
Answer: B
50.You have the Azure Traffic Manager profiles shown in the following table.
You plan to add the endpoints shown in the following table.
Which endpoints can you add to Profile2?

A. Endpoint1 and Endpoint4 only
B. Endpoint1, Endpoint2, Endpoint3, and Endpoint4
C. Endpoint1 only
D. Endpoint2 and Endpoint3 only
37 / 42
E. Endpoint3 only
Answer: A
51.You have the Azure load balancer shown in the Load Balancer exhibit.
LB2 has the backend pools shown in the Backend Pools exhibit.
You need to ensure that LB2 distributes traffic to all the members of VMSS1.
What should you do?
A. Add a network interface to VMSS1.
B. Configure a health probe.
C. Add a public IP address to each member of VMSS1.
D. Add a load balancing rule.
Answer: D
38 / 42

* Three storage accounts named storage1, storage2, and storage3
storage accounts.
Solution: You create a network security group (NSG) and associate the NSG to Subnet1.
A. Yes
B. No
Answer: A
the series contains a unique solution that might meet stated goals. Some question sets might have more
than one correct solution, while others might not have a correct solution.
* Three storage accounts named storage1, storage2. and storage3
storage accounts.
Solution: You create a network security group (NSG). You configure a service tag for Microsoft Storage
and link the tag to Subnet1.
A. Yes
B. No
Answer: A
54.HOTSPOT
You have an Azure application gateway named AppGW1 that provides access to the following hosts:
* www.adatum.com
* www.contoso.com
* www.fabrikam.com
AppGW1 has the listeners shown in the following table.
You create Azure Web Application Firewall (WAF) policies for AppGW1 as shown in the following table.
39 / 42
Answer:
55.HOTSPOT
You have an Azure subscription that contains a single virtual network and a virtual network gateway.
You need to ensure that administrators can use Point-to-Site (P2S) VPN connections to access resources
in the virtual network. The connections must be authenticated by Azure Active Directory (Azure AD).
40 / 42
Answer:
56.You have 10 Azure App Service instances. Each instance hosts the same web app. Each instance is in
a different Azure region.
You need to configure Azure Traffic Manager to direct users to the instance that has the lowest latency.
Which routing method should you use?
A. geographic
B. weighted
C. performance
D. priority
Answer: D
57.You have an Azure virtual network that contains two subnets named Subnet1 and Subnet2. Subnet1
contains a virtual machine named VM1. Subnet2 contains a virtual machine named VM2.
You have two network security groups (NSGs) named NSG1 and NSG2. NSG1 has 100 inbound security
rules and is associated to VM1. NSG2 has 200 inbound security rules and is associated to Subnet1.
VM2 cannot connect to VM1.
You suspect that an NSG rule blocks connectivity.
41 / 42
You need to identify which rule blocks the connection. The issue must be resolved as quickly as possible.
Which Azure Network Watcher feature should you use?
A. Effective security rules
B. Connection troubleshoot
C. NSG diagnostic
D. NSG flow logs
Answer: C
58.You have an Azure application gateway named AppGW1 that balances requests to a web app named
App1.
You need to modify the server variables in the response header of App1.
What should you configure on AppGW1?
A. HTTP settings
B. rewrites
C. rules
D. listeners
Answer: A
59.You plan to deploy an Azure virtual network.

You need to design the subnets.
Which three types of resources require a dedicated subnet? Each correct answer presents a complete
solution. NOTE: Each correct selection is worth one point.
A. VPN gateway
B. Azure Bastion
C. Azure Active Directory Domain Services (Azure AD DS)
D. Azure Application Gateway v2
E. Azure Private Link
Answer: C,D,E
42 / 42

AZ 700 Exam4Training Dumps

Uploaded by

Copyright:

Available Formats

AZ 700 Exam4Training Dumps

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AZ 700 Exam4Training Dumps

Uploaded by

Copyright:

Available Formats

Exam4

Latest and valid Q&A

Title : Designing and Implementing

1. Topic 1, Litware. Inc Case Study 1

Virtual Networking Requirements

Hybrid Networking Requirements

PaaS Networking Requirements

5. Topic 2, Contoso Case Study 2

To start the case study

Vnet1 contains a virtual network gateway named GW1.

Azure Virtual Machines

Azure Private DNS Zones

Other Azure Resources

Network Security Requirements

12 Topic 3, Mix Questions

You plan to deploy a NAT gateway named NAT1.

17.You have an Azure virtual network named Vnet1.

F. Add a custom rule to Policy1.

You have the resources shown in the following table.

Vnet1 connects to an ExpressRoute circuit.

You plan to deploy Azure Virtual WAN.

30.You have an Azure virtual network and an on-premises datacenter.

In NSG1, you create inbound rules as shown in the following table.

NSG2 has only the default rules configured.

the following error.

44.You have the Azure resources shown in the following table.

You have a private DNS zone named fabrikam.com.

questions will not appear in the review screen.

You plan to add the endpoints shown in the following table.

Which endpoints can you add to Profile2?

* A virtual network named Vnet1

59.You plan to deploy an Azure virtual network.

You might also like