Lecture #2-Physical Chemistry - 8 (L2-P-2)

Al – Turath University College
Oil and Gas Refining Engineering Department

1.3.2- Constant temperature equilibria:
Temperature composition diagrams
To discuss distillation we need a temperature composition diagram , a phase diagram in which the boundaries show the
composition of the phases that are in equilibrium at various temperatures (and a given pressure, typically 1 atm). Note
that the liquid phase now lies in the lower part of the diagram.
(a)The distillation of mixtures:

The region between the lines is a two-phase region where F′ = 1. As usual, the prime
indicates that one degree of freedom has been discarded; in this case, the pressure is
being kept fixed, and hence at a given temperature the Compositions of the phases
in equilibrium are fixed. The regions outside the phase lines correspond to a single
phase, so F′ = 2, and the temperature and composition are both independently
variable
In a simple distillation, the vapour is withdrawn and condensed. This technique is
used to separate a volatile liquid from a non-volatile solute or solid.
In fractional distillation, the boiling and condensation cycle is repeated
successively. This techniques used to separate volatile liquids. We can follow the
changes that occur by seeing what happens when the first condensate of composition
a3 is reheated. The phase diagram shows that this mixture boils at T3 and yields a
vapour of composition a3′, which is even richer in the more volatile component.
That vapour is drawn off, and the first drop condenses to a liquid of composition a4.
The cycle can then be repeated until in due course almost pure A is obtained. The
efficiency of a fractionating column is expressed in terms of the number of
theoretical plates, the number of effective vaporization and condensation steps that
are required to achieve a condensate of given composition from a given distillate.
Thus, to achieve the degree of separation, the fractionating column must correspond
to three theoretical plates. To achieve the same separation for the system in which
the components have more similar partial pressures, the fractionating column must
be designed to correspond to five theoretical plates.
(b) Azeotropes
Although many liquids have temperature–composition phase diagrams resembling the ideal version, in a number of
important cases there are marked deviations. A maximum in the phase diagram may occur when the favourable
interactions between A and B molecules reduce the vapour pressure of the mixture below the ideal value: in effect, the A–B
interactions stabilize the liquid. In such cases the excess Gibbs energy, GE. is negative (more favourable to mixing than
ideal). Examples of this behaviour include trichloromethane/propanone and nitric acid/water mixtures. Phase
diagrams showing a minimum indicate that the mixture is destabilized relative to the ideal solution, the A–B interactions
then being unfavourable. For such mixtures GE is positive (less favourable to mixing than ideal), and there may be
contributions from both enthalpy and entropy effects. Examples include dioxane/water and ethanol/water mixtures
Deviations from ideality are not always so strong as to lead to a maximum or minimum in the phase diagram, but when they
do there are important consequences for distillation. Consider a liquid of composition a on the right of the maximum. The
vapour (at a2′) of the boiling mixture (at a2) is richer in A. If that vapour is removed (and condensed elsewhere), then the
remaining liquid will move to a composition that is richer in B, such as that represented by a3, and the vapour in equilibrium
with this mixture will have composition a3′. As that vapour is removed, the composition of the boiling liquid shifts to a point
such as a4, and the composition of the vapour shifts to a4′. Hence, as evaporation proceeds, the composition of the remaining
liquid shifts towards B as A is drawn off. The boiling point of the liquid rises, and the vapour becomes richer in B. When so
much A has been evaporated that the liquid has reached the composition b, the vapour has the same composition as the
liquid. Evaporation then occurs without change of composition. The mixture is said to form an Azeotrope, the mixture of
liquids has a constant boiling point because the vapour has the same composition as the liquid mixture. When the
azeotropic composition has been reached, distillation cannot separate the two liquids because the condensate has the same
composition as the azeotropic liquid. One example of azeotrope formation is hydrochloric acid/water, which is azeotropic
at 80 percent by mass of water and boils unchanged at 108.6°C.
Henry’s law :is a gas law which states that at the amount of gas that is dissolved in a liquid is directly
proportional to the partial pressure of that gas above the liquid when the temperature is kept constant. The
constant of proportionality for this relationship is called Henry’s law constant (usually denoted by kH). The
mathematical formula of Henry’s law is given by: P ∝ C (or)
P = kH .C
Q7: Calculate the solubility of gaseous oxygen in water at a temperature of 293 k when the partial pressure exerted by
O2 is 1bar?
Q8: The value of KH for carbon dioxide at a temperature of 298 k is 1.6 *103 atm.L/mol. at what partial pressure would
the gas have a solubility in water of 2 *10-5 M ?
Q9: The value of KH for hydrogen gas (H2)at a temperature of 298 k is 7.8 *10-4 M/atm. A sealed container of water has a
partial pressure of 2 atm (H2) in the headspace above water .what is the concentration of (H2) in the water?

Lecture #2-Physical Chemistry - 8 (L2-P-2)

Uploaded by

Copyright:

Available Formats

Lecture #2-Physical Chemistry - 8 (L2-P-2)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Lecture #2-Physical Chemistry - 8 (L2-P-2)

Uploaded by

Copyright:

Available Formats

Al – Turath University College

Oil and Gas Refining Engineering Department

(a)The distillation of mixtures:

You might also like