Surfaces treatments

A wide range of treatments to solve your problems of surfaces

Techniques Sur faces, jobbing subsidiar y of HEF Group, follows its customers
worldwide, through more than fifty units in more than 20 countries:

• France • Czech Republic • China

• Germany • Poland • Japan
• United Kingdom • Turkey • India
• Spain • USA • Thailand
• Italy • Canada • Vietnam
• Switzerland • Mexico • Malaysia
• Hungar y • Brazil • ...
 TENIFER™ - QPQ™ HEF patent ARCOR™ HEF patent

Nitro-carburation treatments associate thermochemical dif fusion in salt Range of treatment processes intended for ferrous metals, associating highly
baths with a passivation and a finish treatment. It makes possible to com- efficient corrosion protection with good wear resistance. ARCOR treatments realize
bine corrosion, wear and fatigue resistance proper ties on steel and cast a passivation by a thermochemical method and an organic dispersion on the
iron. This treatment is combined with mechanic cleaning operations/polish- sur face layers of the treated parts. Parts treated with ARCOR have an excellent
ing as par t of QPQ in order to lower the sur face roughness. black decorative appearance.

Treatment parameters: TENIFER treatment temperature is set between Treatment parameters: ARCOR treatment temperature is set between 500 and
500 and 630°C and treatment time varies between 30 and 210 minutes. 630°C and treatment time varies between 30 and 210 minutes.

Remarks: The installed equipment allows the treatment of par ts until a Remarks: Unlike electrolytic coatings, there is no hydrogen embrittlement with
diameter of 1300 mm and a height of 2300 mm. ARCOR. Installed equipment is suitable for treatment of parts to diameter 1,300
mm (51in), height 2,300 mm (90 in).
Precautions to be taken: Schedule 3-hour thermal stress relieving at
a 20°C higher temperature than the treatment temperature before final Precautions to be taken: Schedule 3-hour thermal stress relieving at a 20°C
machining. higher temperature than the treatment temperature before final machining.

Applications examples: Applications examples:

• Gears • Camshafts • Slides • Bearings • Turbine liners • Tumbler • Cylinder rods or shock absorbers • Axle hinges • Crane joint • Electric equipment
• Racks • Cutting tool • Crankshaft • Hydraulic cylinder • Rockets • Wheel mechanisms • Hinge pins • Automobile lock mechanisms • Ar ticulation axes
hub • Connecting rods, cardan • Ar ticulation pins • Molds for aluminum • Operating • Screws • Window wiper shafts • Balls for bowling games • Iron
alloys flows • Pistons… industr y equipment…

SULF BT™ HEF patent PHOSPHATIZING

Molten salt bath electrolytic conversion of the sur face of the base mate- Chemical conversion treatment providing a cr ystalline phosphate layer (Mn,
rial to create an iron sulfide layer to improve resistance to seizure and to FeMn, Zn, ZnFe, ZnCa).
strengthen adherence of lubricating films. The layer has excellent self-lu-
bricating proper ties. Characteristics:
MANGANESE TYPE PHOSPHATIZING:
Treatment parameters: • Decrease friction,
SULF BT treatment is done at a temperature of 190 ± 5°C (374 ± 40°F). • Improves adherence of lubricating films.
ZINC TYPE PHOSPHATIZING:
emarks:
• Improves corrosion resistance
Treatment is possible on heat-treated steels with low tempering tempera-
• Excellent base for adherence of top-coat organic coatings.
ture, especially case hardened steels.

Precautions to be taken: Materials suitable for treatment:

Ferrous alloys • Aluminum alloys • Zinc alloys • Cadmium coatings.
SULF BT is not suitable for steels with chromium content greater than 12%.

Applications examples: Applications examples:

Straight gears • Gleason gears • Gearboxes pinions • Camshaft • Rocker
• Sur face hardening and case hardened gears • Camshafts • Engine linings
shaft • Automatic weapons chambers • Par ts for rifles • Fish joints • Val-
• Ball joints • Pushrods • Dif ferential satellites • Dif ferential spiders •
ves cocks • Car screws and bolts • All applications for duplicate molding
Universal joints • Shafts and bushings • Gearboxes forks • Gearboxes
• Free wheels eccentric bearings…
spacer rings • Steering screw • Racks- pneumatic hammer pistons • Stop
washers for gearboxes…

HEF Groupe - ZI Sud, rue Benoit Fourneyron - 42166 Andrézieux-Bouthéon - Tel: +33 4 77 55 52 22 - Fax: +33 4 77 55 52 00 - www.hef.fr 3
 CERTESS™ CARBON CERTESS™ NITRO

VACUUM DEPOSITIONS FOR TRIBOLOGICAL USE VACUUM DEPOSITIONS FOR MECHANICAL USE
DC, DT, DCX, DCY, DDT X, N, TI, T, SD, G, HM

Amorphous carbon depositions DLC (diamond) that cover a large range of PVD coatings family obtained by PEMS processes leading to, depending on
hardness and of fer ver y low friction coef ficients. These depositions come the case, depositions with ver y impor tant hardness, low friction and anti-ad-
in multilayers depending on the applications. hesion coef ficients.

Characteristics: Characteristics:
• Hardness 1000 to 3500 Hv • Temperature of realization: 100 to 450°C
• Excellent friction proper ties • Hardness 1000 to 4000 HV
• No hydrogen embrittlement • Resistance to abrasive and adhesive wear
• Dimensions and roughness respect • Thermic stability
• Resistance to oxidation
Materials suitable for treatment:
Steels and cast irons • Carbides • Dense sintered • Inconels • Aluminum, Materials suitable for treatment:
copper and titan alloys… Steels and cast irons • carbides • Dense sintered • Inconels • Aluminum,
copper and titan alloys …
Applications examples:
Engine components • Mechanic • Shaping tools • Elements of plastic injec- Applications examples:
tion molds… • Forming and cutting punchers • Injection molds • Par ts subject to abra-
sion (Textile machiner y, paper processing tools, aeronautic…)
• Medical devices • Electrical components devices…

VACUUM DEPOSITIONS PROCEM™

FOR DECORATIVE USE

Coatings by magnetron cathode spraying of metals or specific metallic alloys, VACUUM DEPOSITIONS FOR ELECTROMAGNETIC SHIELDING
making layers for decorative use on large dimensions par ts.
Coatings by magnetron cathode spraying of metals or alloys of low resis-
Characteristics: tance on non-conductors or low conductors materials.
• Chrome, stainless steel, gold aspect …
• Large diversity of applicable materials : chrome, aluminum, gold… or spe- Characteristics:
cific alloys depending on specifications • Discharge of electrostatic charges
• Ver y high purity of coatings • EMI shielding
• Master y of thicknesses and states of sur face • M ultifunctionality (Resistance to chemical aggressions, friction or abra-
• Resistance to chemical aggression sion…)
• Negligible impact on the objects mass and precision
Remarks:
Application on large dimensions par ts. Remarks: Can be applied on large dimensions par ts.

Materials suitable for treatment: Materials suitable for treatment:

• Glasses • Plastics • Composites of organic matrix • Ceramics • Cermets • Glasses • Plastics • Composites of organic matrix • Ceramics • Cermets
• Metals or alloys … • Metals or alloys …

Applications examples: • Sign-board • Logos… Applications examples: • Components of armament •Telephony • Connec-
tions • Captors • Printed circuits • Heating elements • Antennas for satel-
lites…

4 HEF Groupe - ZI Sud, rue Benoit Fourneyron - 42166 Andrézieux-Bouthéon - Tel: +33 4 77 55 52 22 - Fax: +33 4 77 55 52 00 - www.hef.fr
 CORRALU™ V CERTESS™ BLAST

VACUUM DEPOSITIONS FOR CORROSION PROTECTION VACUUM DEPOSITIONS FOR EROSION PROTECTION

Deposition of a pure aluminum layer of 10 to 50 um. Multilayers metal/nitride PVD treatment.

Characteristics: Characteristics:
• Anticorrosion protection Thickness from 10 to 50 um, the metal nature may var y depending on
• Electrical continuity conditions.

Remarks: Materials suitable for treatment:

Dimension of the centimeter at 2 m, contact us if beyond. Possibility of All metallic or ceramic, for polymers or composites, contact us.
complementar y treatment (SiOx, chemical conversion, Sur tec 650, Corralu,
varnish, chetylic alcohol). Applications examples:
• Motion par ts subject to erosion for aeronautic applications
Materials suitable for treatment: • Power plants
• Steels • Stainless steels • Aluminum alloys • Refractor y alloys • Titans
• All steels compatible with vacuum deposition • Application possible on
plastics • Glasses and ceramics.

Applications examples:
• Par ts of fighter aircrafts • Screws • Seronautic • Boarded electronic hou-
sings • Captors stands • Connectors bodies…

VACUUM DEPOSITION FOR OPTICAL USE CORRALU™ B

Coatings by magnetron cathode spraying of metals or specific metallic alloys, Chemical conversion of aluminum alloys that is HEXAVALENT chrome free
making layers with reflecting or semi-transparent proper ties, adapted to the both in the applied layer than in the products used to make it. These
various ranges of wave lengths. per formances in terms of corrosion, preparation and electric continuity allow
Corralu™ B being a solution for the future in the aeronautic field. It allows
Characteristics: meeting the rules and directives (DEEE, RoHS, VHU).
•Chrome, stainless steel, gold aspect …
• Large diversity of applicable materials : chrome, aluminum, gold… or spe- Characteristics:
cific alloys depending on specifications • Elaboration temperature 30-40°C
• Ver y high purity of coatings • Weight of layer 300g/M2
• Master y of thicknesses and states of sur face • Application mode loose or fasten
• Resistance to chemical aggression • Temperature resistance until 100°C
• Contact conductivity < 0.8 m0hm/cm2
Remarks: Application on large dimensions par ts.
Remarks: Thanks to master y in the specific range, CORRALU™ B satisfies
Materials suitable for treatment: • Glasses • Plastics • Composites of requirements of corrosion resistance in a large range of aluminum alloys
organic matrix • Ceramics • Cermets • Metals or alloys • Logos … used in the aeronautic.

Applications examples:
• Visors • Screens • Bottling • Architecture.

HEF Groupe - ZI Sud, rue Benoit Fourneyron - 42166 Andrézieux-Bouthéon - Tel: +33 4 77 55 52 22 - Fax: +33 4 77 55 52 00 - www.hef.fr 5
 SDA™ - GRAPHLUB™ TEGLISS™

Organic coatings providing solid lubricants to the sur face of the treated Organic coatings using thermal hardened or thermo-stable polymers (PTFE,
par ts, such as molybdenum or graphite. POLYIMIDE).

Characteristics (depending on type of coating): Characteristics (depending on type of coating):

•D ecrease of friction coef ficient, producing a transfer film on the antago- • Low friction coef ficient
nist sur face (Solid lubricant/solid lubricant friction) • Seizure resistant
• Dr y friction • Anti-adherence
• Resistance to corrosion • Chemically iner t
• Resistance to fretting-corrosion • Resistance to fretting-corrosion
• Wear resistance • Compatible with foodstuf fs
• Decrease of sound levels
• Resistance to radiations Materials suitable for treatments:
All types of metal substrates.
Materials suitable for treatments:
All types of metal substrates. Application examples:
• Coatings for molds • Valves systems • Hinge axles • Connectors rings •
Application examples: Tie rods • Bearings • Special screws and bolts • Automotive locks • Brake
• Loaders for rifles • Receivers of automatic weapons • Splice axes of cra- box • Mixers • Molds for industrial pastr y.
nes • Oil connectors • Slides • Balls of valves • Coatings of molds.

ROMAX™ DOT™

POLYMER COATINGS Organometallic coatings resisting to extreme conditions of corrosion.

Organic coatings for technical or decorative purposes. Characteristics:

•E xcellent protection against corrosion (can exceed 1000 hours in salt
Characteristics (depending on type of coating): spray test)
• Corrosion protection • Control of frictions
• High resistivity (electrical insulation) • No hydrogen embrittlement
• Low resistivity (EMI shielding) • Good resistance in aggressive environment
• Accepts friction
• Variety of colors
Materials suitable for treatments:
Remarks: Polymer coatings may be classified in two main categories: liquid All types of metal substrates.
coatings and powder coatings (fluidized bed, electrostatic spraying, etc.).
Application examples:
Materials suitable for treatments: All types of substrates. • Screws • Staples • Washers • Securing clips • Transmissions • Synchro-
nization bushings • Rolls • Seal holders • Springs • Connectors • Locks
Application examples: • Industrial fans • Industrial cabinets and enclosu- • Various axes • Collars…
res • Generatings sets • Motor frames • Screw head • Under water par ts
and par ts of ships • Tunnel equipment • Covers for electronics purposes •
Miscellaneous hardware • Body work • Bus bar…

6 HEF Groupe - ZI Sud, rue Benoit Fourneyron - 42166 Andrézieux-Bouthéon - Tel: +33 4 77 55 52 22 - Fax: +33 4 77 55 52 00 - www.hef.fr
 TECHNICAL VARNISHES ABAR™

Technique Sur faces can inter vene as a technical varnish applicator depen- Organic coatings stopping build-up of mist by modifying the sur face tension
ding on your specific needs: of the substrate.
• Whitford
• Everlube Characteristics:
• Molykote • Preser vation of optical proper ties
•… • Abrasion resistance
• Good machinability
Characteristics:
• Low coef ficient of friction Materials suitable for treatments:
• Seizure resistance • Organic glass (polycarbonates) • Mineral glass
• Anti-adherence
• Chemical iner tia Application examples:
• Resistance to fretting corrosion • Headsets shields • Helmets visors • Safety optics • Goggles for spor ts
• Suitable for food • Display screens • Dials …

Materials suitable for treatments:

All types of materials.

Application examples: Technique Sur faces is par ticularly equipped to treat

large dimensions par ts: Of fshore, Oil and gas…

DEPTON™ FOREZ™ HEF patent

Zinc/tin alloy and metal deposits by mechanical means to protect ferrous Copper-tin alloy electrolytic coating with the friction proper ties of a high tin
alloy par ts against corrosion. content bronze.

Characteristics: Characteristics:
• Deposited thickness ver y uniform • Improves
 friction proper ties of lubricated steels
• No hydrogen embrittlement • Increases slip and fit proper ties.
• Ductile plating likely to become deformed after treatment • Increases oil film breaking load.
• Good corrosion resistance • Solution to fretting-corrosion problems

Remarks: Deposit of passivating layers is possible Materials suitable for treatments:

All steels (carbon steels, alloyed steels, stainless steels, etc.), cast irons
Materials suitable for treatments: and sintered irons.
All steels, especially steels with high elastic limit.
Application examples:
Application examples: • Hydraulics cylinder pistons • Journals • Gear reducer wheels • Sliders
• Automotive hardware • Springs • Washers • Grating attachments • Forks • Turbine valve • Attachment pins • Pump drums • Electrical connections
• Letter box • Locks • Crankshaft pins • Grommets • Locking collars • • Hydraulic couplings…
Set screws • Mirror pin lugs • Mountains climbing accessories • Embed-
ding nails • Retaining clips for automotive boots • Automotive instruments
panels…

HEF Groupe - ZI Sud, rue Benoit Fourneyron - 42166 Andrézieux-Bouthéon - Tel: +33 4 77 55 52 22 - Fax: +33 4 77 55 52 00 - www.hef.fr 7
 STANAL™ 400 HEF patent DELSUN™ HEF patent

Solid-phase metal dif fusion treatment at 400°C (752° F). Sur face treatment for the prevention of wear and seizure of copper alloy
STANAL™ 400 improves the resistance to seizure of stainless steel par ts par ts. This treatment is obtained by tin base electrolytic plating followed
without changing the corrosion resistance. by dif fusion heat treatment at 400°C (752° F).

Characteristics: Characteristics::
• Improves sur face hardness • Improves sur face hardness
• Improves wear resistance and resistance to seizure • Improves adherence of lubricating films
• Good intrinsic resistance to corrosion • Decreases the friction coef ficient when par ts are lubricated
• Excellent base for self-lubricating coating varnishes • Excellent resistance to abrasion

Materials suitable for treatment: Materials suitable for treatment:

• Austenitic stainless steels • Mar tensitic stainless steels • Structurally Bronze • Brass copper • Aluminum alloys • Copper • Nickel alloys
hardened stainless steels • Refractor y steels • Alloyed steels
Application examples:
Application examples: • Tap and fitting nuts and screws • Shell bearings • Worm screw gear redu-
• Electrical connectors for aeronautics • Hot gas restar t joints on planes cer wheels • Spherical gates • Suppor t plates • Pump bodies • Gearboxes
reactors • Hydraulic joints • Stainless steel nuts and bolts for nuclear indus- synchronizers • Guide bushes • Idle gears forks • Valves • Hinging rings
tr y • Various par ts composing nuclear valves• containers plugs for atomic • Machine tool wedges • Bearing blocks • Linkages • Couplings • Valve
fuel • ar ticulation axles for submarine doors • Vane fixation brooches for guides • Stamping dies • Continuous casting molds…
steam turbines • Door hinges for atomic pool sin…

MOAP™ HEF patent PLASMA - ARC SPRAYING

Slippage coatings of graphite base with metal bond. Dense coating of metals, ceramics or cermet by spraying melted par ticles
by plasma arc.
Characteristics:
•U  sed for applications in temperature, principally in glassware for gob Characteristics:
transfers • Refractor y coatings
• Improves significantly the gob slippage with a per fect regularity over time. • Abrasion-erosion resistance
• Excellent wear resistance • Resistance to fretting-corrosion
• Repetitive use of tooling after a simple cleaning • Wear resistance
• Corrosion resistance
Materials suitable for treatment: • Conductibility and/or thermal or electrical insulation
• Steels • Cast irons • Aluminum alloys • Stainless steels. • Improves friction proper ties in severe environments

Application examples: Materials suitable for treatment:

Glassware par ts par ticularly for gobtransfer. All non-organic materials, except copper.

Application examples:
• Wire guides • Sealing packing • Medical prostheses • Drawing punches
• Blocking inser ts…

8 HEF Groupe - ZI Sud, rue Benoit Fourneyron - 42166 Andrézieux-Bouthéon - Tel: +33 4 77 55 52 22 - Fax: +33 4 77 55 52 00 - www.hef.fr
 ELECTRIC ARC SPRAYING LOW PRESSURE CARBURIZING

OXYACETYLENE - ELECTRIC ARC Characteristics:

• No sur face oxidation and inter granular
Metal and metal alloy coating by spraying melted par ticles. • Reduction of deformations
• Removing or reduction of rectification excess thicknesses
Characteristics: • Reaming cementation from few tenths of mm of Ø
• Wear resistance. • Control of the cemented depth (±5/100 mm)
• Corrosion resistance • Good repeatability of the results
• Conductibility and/or thermal or electrical insulation • Ease to protect areas to save
• Decreased friction with lubrication
Materials suitable for treatment:
Materials suitable for treatment: Any steels of MNCr, MnB, NiCrMo, CrNiMo... (Each product has its specific
All materials, except copper. range of low pressure cementation).

Application examples: Application examples:

• Capstan rollers • Paper Mill cylinders • Synchronizers and gearboxes forks • Gear of gearbox, gears of direction • Gears of assisted direction • Nuts
• Fan blades • Crankshaft pins • Par ts of turbo compressors • Repair of • Injector • Sprayers • Pump housings • Diverse gears • Bearing bushings
work par ts or par ts with machining default • EMI shielding. • Wear bushings • Bushings with seal…

SILVER PLATING - TIN PLATING

INDUCTION HARDENING TIN/LEAD ALLOY PLATING

Characteristics: Silver, tin, tin/lead alloy electrolytic coatings suitable for mechanical appli-
• Increase of hardness cations and electrical uses.
• Increase of friction wear resistance
• Increase of tiredness resistance under non-uniform stress (bending, twis- Characteristics:
ting) • Ver y good electrical conductivity
• Increase of tiredness resistance by rolling under heavy charges • Excellent friction proper ties
• Low deformations • Gloss or semi-gloss plating
• Ver y localized or total quenching depending on needs • Weldable plating
• Ductile deposits
Materials suitable for treatment: •Ver y suitable for slip and fitting and deformation
Carbon steels, low-alloy steels, cast irons.
Materials suitable for treatment:
Application examples: All types of conducting substrates.
• Axes • Shafts • Bears • Rockets • Axle shafts • Camshafts • Crankshafts Stainless steel when improved resistance to seizing is required.
• Gasket sur faces • Bearing seats • Cylinders • Cylinder rods • Racks…
Application examples:
• Connectors to weld • Crimp connectors • Flexible connectors • Collec-
tors • Contact blades • Spherical cock • Soldering terminal • Connector
bar • Long linking bars (Line continuous treatment) • Valve seals • Flexible
braid connectors …

HEF Groupe - ZI Sud, rue Benoit Fourneyron - 42166 Andrézieux-Bouthéon - Tel: +33 4 77 55 52 22 - Fax: +33 4 77 55 52 00 - www.hef.fr 9
 NICKEL CADMUM NICKEL PTFE
CADMIUM AND ZINC PLATING

Electrolytic zinc coatings intended to improve the corrosion resistance of NICKEL PTFE coatings are chemical nickel composite coatings in which are
ferrous alloys. input PTFE submicronicals par ticles spread evenly. The implementation by
co-deposition allows answering simultaneously to functionalities, of fering a
Characteristics: good compromise between chemical nickel and PTFE proper ties.
• Good resistance to corrosion at high temperature
• Excellent friction proper ty Characteristics:
• Uniform plating • Self-lubricating, low friction coef ficient
• Ductile plating • Excellent anti-adherence proper ties
• Excellent base for self-lubricating coatings • Good resistance to corrosion

Remarks: Materials suitable for treatment:

Several types of finish are available: • Steels and cast irons• Stainless steels• Aluminum and alloys • Copper
• Passivation (colored or plain) • Chromating • Organic and alloys.

Application examples: NICKEL PTFE (content of phosphor 7 to 10%)

Springs • Special motor frame • Bolts and screws • Sliders • Electric Tempe- Maximum Electric
Content of Thick- Friction
equipment boards • Slicing shafts • Unions • Lock mechanisms • Hydrau- PTFE ness
Hardness rature of use
coef ficient
resisti-
lic locks • Washers • Cable clamps • Ball joints • Nuts… treatment temperature vity
0.05-0.2
3-11% by 250-350 HV depending
mass (11 350-450 HV on the PTFE 150-250
3-15um 86-92°C 310-330°C
to 33% by after T. Th 2 h content µΩ.cm
volume) at 280°C and applied
load

ELECTROLESS NICKEL NICALEC Pechiney Licence

Phosphorous-nickel alloy base coating obtained by autocatalytic reduction of Nickel coating plated on aluminum (and alloys) par ts to provide optimal
a nickel salt. May be followed by heat treatment at a temperature between electrical conductibility.
150 and 650°C (300 and 1200° F) in function of the characteristics required.
Characteristics:
Characteristics: •G lobular structure of fering numerous contact areas between connected
• Plating thickness ver y uniform sur faces (contact resistance decreased)
• Excellent resistance to corrosion and wear • Ver y ductile and low residual stress level
• Hardness obtained: from 550 to 1,000 Vickers depending on the final • Conductivity ver y stable when hot
heat treatment.
Materials suitable for treatment:
Materials suitable for treatment: • Pure aluminum • AGS type aluminum alloys.
All types of materials with a sur face suitable for a catalytic reaction.
Application examples:
Application examples: • Low current signal electrical connections • Copper Aluminum electrical
Valves cock • Distributors pistons • Plastics injections molds • Jack bodies bonds • Power current transmissions in rolling stock and electrical flight
• Accumulators bodies • Closing plates for manholes • Molds bearings for controlles aircraft • Automobile connections…
glass industr y • Synchronizers • Axles for windscreen wipers • jack rods •
Rods for valves control • Axles for brake control…

10 HEF Groupe - ZI Sud, rue Benoit Fourneyron - 42166 Andrézieux-Bouthéon - Tel: +33 4 77 55 52 22 - Fax: +33 4 77 55 52 00 - www.hef.fr
Conception graphique, P.A.O. et photos : lacliqueàbill
 A network close to large industrial sites

CONTACTS
COUNTRY SUBSIDIARY CONTACT DETAILS TERRITORIES
HEF Durferrit France Tel: +33 4 77 55 52 22 Europe (except Ger-
France ZI Sud, rue Benoit Fourneyron Fax: +33 4 77 55 52 00 many & Czech Repu-
42166 Andrézieux-Bouthéon [email protected] blic)
EUROPE

HEF Durferrit Germany Tel: +49 621 32 224 0

Germany
Germany Industriestr. 3 Fax: +49 621 32 224 800
D - 68169 Mannheim [email protected] Austria
HEF Durferrit Czech Republic Tel: +42 07 24 91 38 37
Czech Republic Lomena 66 Fax: +42 02 66 31 34 09 Czech Republic
25070 Panenske Brezany [email protected]
HEF Durferrit Brazil Tel: +55 11 4070 7236
Brazil Av. Fábio Eduardo Ramos Esquivel, 2.349 Fax: +55 11 4071 1813 South America
CEP 09941-201 - Centro - Diadema - SP [email protected]
AMÉRICAS

HEF Durferrit Mexico Tel: +52 442 298 0429

Mexico Conjunto Industrial Pitilutx - Acceso IV Número 35 Nave C Fax: +52 442 298 0427 Mexico
Parque Benito Juárez - C.P. 76120 Queretaro, QRO [email protected]
HEF Durferrit USA Tel: +1 937 323 25 56
USA
USA 2015 Progress Drive Fax: +1 937 323 57 87
Canada
45505 Springfield, OHIO [email protected]
HEF Durferrit China Tel: +86 21 6487 4390
China N° 629 Lingling Road, Aihe Bidg 2C Fax: +86 21 3424 0432 China
Xuhui District - Shangai, P.R. China, 200030 [email protected]
HEF Durferrit India Tel: +91 984 102 3772
N° 16/35 6th Main Road - Raja Annamalaipuram
India
+91 984 180 4963
India Chennai, 600 028 Tamil Nadu State, India +91 442 745 2642
Pakistan
[email protected] Bangladesh
ASIA

HEF Durferrit Japan Japan

Sankyo Bidg 6F, Shin-Yokohama 3-16-14, Kohoku-ku, Tel: +81 45 474 2844
Korea
Japan Yokohama-Shi, Kanagawa-Ken, 222-0033 Fax: +81 45 474 2844
Taïwan
[email protected]
Viêtnam
HEF Durferrit Thailand
Tel: +66 (0)2 672 0232
Chatrium Residence Sathorn Hotel, Business Center - Meeting 2,
South East Asia 291 Naradhiwas Rajanagarindra 24, New Sathorn Road,
+66 (0)8 19 22 87 20 South East Asia
Bangkok 10120, Tahiland [email protected]

HEF Durferrit France Tel: +33 4 77 55 52 22

Other Countries ZI Sud, rue Benoit Fourneyron Fax: +33 4 77 55 52 00 Other Countries
42166 Andrézieux-Bouthéon [email protected]