BSR 2022final 30.9.2022

GOVERNMENT OF RAJASTHAN
PUBLIC WORKS DEPARTMENT
BASIC SCHEDULE OF RATES 2022

(EFFECTIVE FROM 28.09.2022)
 GENERAL BASIC RATES

 BUILDINGS WORKS
 SANITARY WORKS
 HORTICULTURE WORKS
 MISCELLANEOUS CIRCULARS
AVAILABLE WITH
EXECUTIVE ENGINEER,
PWD CITY DIVISION – II,
JAIPUR Price : Rs 600.00
(Integrated Building BSR 2022 Rajasthan)
INPUTS
BASIC RATES OF MECHINERY
CODE NAME OF MECHINERY UNIT RATE
1 Hire charges of Coaltar Boiler 900 to 1400 litres Day 870.00
2 Hire charges of Concrete Mixer 0.14 cubic metre Day 1300.00
3 Hire charges of Diesel Road Roller - 8 to 10 tonne Day 1730.00
4 Production cost of concrete by batch mix plant. cum 500.00
5 Hire charges of Diesel Truck - 9 tonne Day 1500.00
6 Hire charges of Spraying machine including electric charges Day 450.00
7 Hire charges of Coaltar Sprayer Day 400.00
8 Hire charges of Barber green, drying, mixing and Asphalt Plant, with Day 8900.00
accessories, capacity 30/45 tonne
9 Pumping charges of concrete including Hire charges of pump, piping work & Cum 150.00
accessories etc.
10 Hire charges of Derrickmonkey rope Day 635.00
11 Hire charges of Pumpset of capacity 4000 litres/hour. Day 1200.00
12 Vibrator(Needle type 40mm) Day 800.00
13 Machine for rubbing of floors with driver & car Day 1000.00
14 Front end loader Day 7600.00
16 Mastic Cooker Day 635.00
17 Hire and running charges of tipper Day 1390.00
18 Hire and running charges of loader. Day 1150.00
19 Hand Grinder For mirror polish Day 400.00
20 Hydraulic Excavator (3D) with driver and fuel. Day 8000.00
21 Pin vibrator Day 800.00
22 Surface Vibrator Day 800.00
24 Hire and running charges of hydraulic piling rig with power unit etc. including per day 37000.00
complete accessories and shifting at site.
25 Hire and running charges of light crane. per day 2900.00
26 Hire and running charges of bentonite pump. per day 5775.00
27 Hire and running charges of vibrating pile driving hammer complete with per day 37000.00
power unit and accessories .
28 Hire and running charges of crane 20 tonne capacity. per day 6350.00
29 Carriage of concrete by transit mixer. km/ cum 32.00
30 Generator 250 KVA. per day 11500.00
33 Paint applicator. per day 650.00
37 Mobile crane. per day 6350.00
38 Tractor with ripper attachment. per day 1270.00
39 Tractor with trolley . per day 1300.00
40 Air compressor 250 cfm with two leads for pneumatic cutters/ hammers. day 1730.00
41 Joint cutting machine with 2-3 blades per day 1000.00
42 C.C .batch mix plant. day 50000.00
43 Road sweeper day 700.00
45 Slip form paver with sensor. day 12700.00
46 Water tanker 5000 litr capacity. day 1200.00
47 Concrete joint cutting machine. day 1200.00
48 Texturing machine. day 1000.00
49 Production Cost of concrete for weigh batcher, operator charges & other cum 60.00
charges for designing
50 Water tanker 6 kL capacity hour 300.00
input (Machinery) [1]

INPUTS
BASIC RATES OF LABOUR
CODE LABOUR UNIT RATE
100 Bandhani Day 400.00
101 Bhisti Day 500.00
102 Blacksmith 1st class Day 800.00
103 Blacksmith 2nd class Day 650.00
111 Carpenter 1st class Day 1000.00
112 Carpenter 2nd class Day 800.00
113 Chowkidar Day 600.00
114 Beldar Day 500.00
115 Coolie Day 400.00
116 Fitter (grade 1) Day 800.00
117 Assistant Fitter or 2nd class Fitter Day 600.00
119 Glazier Day 700.00
122 Mason (for plaster of paris work) 1st class Day 700.00
123 Mason (brick layer) 1st class Day 700.00
124 Mason (brick layer) 2nd class Day 600.00
125 Mason (for plain stone work) 2nd class) Day 600.00
126 Mason (for ornamental stone work) 1st class Day 1000.00
127 Driver (for Road Roller, Concrete Mixer, Truck etc.) Day 700.00
128 Mate Day 600.00
130 Mistry Day 700.00
131 Painter Day 600.00
132 Rock Excavator Day 800.00
133 Rock Breaker Day 800.00
134 Rock Hole Driller Day 800.00
135 Stone Chiseller Day 700.00
138 Sprayer (for bitumen, tar etc.) Day 700.00
139 Skilled Beldar (for floor rubbing etc.) Day 500.00
141 White Washer Day 600.00
155 Mason (average) Day 700.00
156 Carpenter (average) Day 600.00
157 Operator (Pile/ Special machine) Day 800.00
159 Skilled torch operator for laying tack Day 600.00
160 Sweeper Day 800.00
161 Helper Day 500.00
162 Dhobi Day 500.00
163 Tailor/Upholsterer Day 600.00
input (Labour) [2]

INPUTS
BASIC RATES OF MATERIALS
CODE NAME OF MATERIALS UNIT RATE
222 Seam bolts and nuts 6 mm dia and 25 mm long 10 Nos 60.00
223 Non - Asbestos fibre cement corrugated sheet 6mm thick. sqm 260.00
224 Non - Asbestos fibre cement close fitting adjustable ridge. metre 320.00
225 Non - Asbestos fibre cement corrugate serrated adjustable ridge. metre 270.00
226 Non - Asbestos fibre cement plain wing adjustable ridge. metre 290.00
227 Non - Asbestos fibre cement unserrated adjustable ridge for hips. metre 300.00
228 Non - Asbestos fibre cement corrugated appron piece. metre 230.00
229 Non - Asbestos fibre cement eaves filler piece. each 150.00
230 Non - Asbestos fibre cement north light curves. metre 300.00
231 Non - Asbestos fibre cement ventilator curves. each 385.00
232 Non - Asbestos fibre cement barge boards 6 mm thick. metre 330.00
233 Non - Asbestos fibre cement ridge finial . pair 150.00
234 Non - Asbestos fibre cement special north light curves. each 405.00
235 Non - Asbestos fibre cement S type louvers. each 250.00
236 Non - Asbestos multi purpose fibre cement board 6mm thick. sqm 280.00
237 Non - Asbestos multi purpose fibre cement board 8mm thick. sqm 350.00
285 Brick Aggregate (Single size) : 63 mm nominal size cum 485.00
291 Stone Aggregate (Single size) : 63 mm nominal size cum 870.00
296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 1100.00
302 Safeda ballies 125 mm diameter metre 70.00
304 Bajri cum 1800.00
305 Bamboo 25 mm dia 2.5 metre long score 500.00
308 Bhusa quintal 350.00
309 Paving bitumen S-90 of approved quality tonne 60500.00
310 Bitumen emulsion tonne 53000.00
312 Bitumen grade PMB - 40 M.T. 60500.00
313 Blown type petroleum bitumen of penetration 85/25 of approved quality tonne 60500.00
314 Bitumen hot sealing compound : grade A kilogram 35.00
316 Bitumen solution primer of approved quality litre 82.00
317 Premoulded joint filler 12 mm thick sqm 570.00
318 Bitumen felt fibre base (vegetable or animal):Type 2 grade 1 sqm 130.00
322 Bitumen felt :Type 3 grade 1 sqm 130.00
324 Coal Tar litre 76.00
325 Blasting powder kilogram 41.00
326 Blasting fuse (fuse wire) each 18.00
328 White face insulating board:12 mm thick sqm 405.00
332 Natural colour insulating board:12 mm thick sqm 300.00
336 Flame retardent face insulating board: 12 mm thick sqm 470.00
338 Flame retardent face insulating, Impregnated fibre board 12 mm thick sqm 580.00
341 Flat pressed 3 layer particle board (medium density) Grade I :12 mm thick sqm 350.00
346 Extra for veneered particle board with : Teak veneering on one side and sqm 350.00
commercial veneered on other side
347 Extra for veneered particle board with : Commercial veneering on both sides sqm 250.00
348 Extra for veneered particle board with : Teak veneering on both sides sqm 580.00
349 SILFIL (Armour Bound) 20 mm thick sqm 270.00
353 Double side tape for fixing SILFIL (Density not less 30 kg./cum.) sqm 70.00
362 Brick bats cum 600.00
364 Wire brush each 50.00
input (Material) [3]


365 Soft brush each 30.00
367 Portland Cement tonne 7000.00
368 White Cement tonne 18000.00
369 Shree binder tonne 500.00
370 Coal (steam) quintal 3465.00
373 Cramp Gun metal 25x6x300 mm each 75.00
378 Brass butt hinges (light/ordinary type) : 125x70x4 mm 10 Nos 650.00
379 Brass butt hinges (light/ordinary type) : 100x70x4 mm 10 Nos 500.00
380 Brass butt hinges (light/ordinary type) : 75x40x2.5 mm 10 Nos 400.00
381 Brass butt hinges (light/ordinary type) : 50x40x2.5 mm 10 Nos 350.00
382 Brass butt hinges (heavy type) : 125x85x5.5 mm(.70)kg 10 Nos 3000.00
383 Brass butt hinges (heavy type) : 100x85x5.5 mm(.56)kg 10 Nos 2700.00
384 Brass butt hinges (heavy type) :75x65x4.0 mm(.20)kg 10 Nos 2500.00
385 Brass parliamentary hinges 150x125x27x5 mm 10 Nos 2500.00
388 Brass parliamentary hinges75x100x20x3.2 mm 10 Nos 2250.00
389 Brass single acting spring hinges 150 mm each 300.00
392 Brass double acting spring hinges 150 mm each 980.00
400 Brass tower bolt (barrel type) 250x10 mm each 250.00
404 Brass flush bolt 250 mm each 140.00
408 Brass handles 125 mm with plate 175x32 mm each 240.00
419 Brass hard drawn hooks and eyes 250 mm 10 Nos 800.00
423 Brass casement window fastener Each 55.00
424 Brass casement stays (straight peg type ) 300 mm weighing not less than 0.33 each 110.00
kg
425 Brass casement stays (straight peg type ) 250 mm weighing not less than 0.28 Each 90.00
kg
426 Brass casement stays (straight peg type ) 200 mmweighing not less than 0.24 each 80.00
kg
427 Brass quadrant stays 300 mm each 130.00
428 Brass fanlight catch 10 Nos 190.00
429 Brass fanlight pivot 10 Nos 260.00
430 Brass chain with hook for fan light catch each 25.00
431 Brass hasps and staples (safety type) 300 mm 10 Nos 760.00
432 Brass hasps and staples (safety type) 115 mm 10 Nos 630.00
433 Brass hasps and staples (safety type)90 mm 10 Nos 510.00
438 Brass Night latch each 560.00
442 Brass helical spring 150 mm each 305.00
444 Brass curtain rod 20 mm dia 1.25 mm thick metre 150.00
445 Brass curtain rod 25 mm dia 1.25 mm thick metre 180.00
446 Brass brackets (curtain rods) 20 mm each 80.00
447 Brass cupboard knob or ward robe knob 50 mm each 50.00
449 Brass screws 50 mm 100 Nos 600.00
524 Chromium plated Brass butt hinges (lheavy) type 75x65x4 .0 mm (200gms) 10 Nos 950.00
525 Chromium plated Brass butt hinges (light/ordinary) type 125x70x4 mm 10 Nos 1150.00
526 Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm 10 Nos 1050.00
527 Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm 10 Nos 900.00
528 Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm 10 Nos 700.00


555 Chromium plated Brass handles 125 mm with plate 175 x32 mm Each 180.00
556 Chromium plated Brass handles 100 mm with plate 150 x 32 mm Each 160.00
557 Chromium plated Brass handles 75mm with plate 125x32 mm Each 140.00
558 Chromium plated Brass mortice latch and lock 100x65 mm with6 levers and a each 800.00
pair of brass lever handles
568 Chromium plated brass casement window fastner each 90.00
569 Chromium plated Brass casement stays (straight peg type ) 300 mmweighing each 130.00
not less than 0.33 kg
583 Chromium plated Brass Night latch each 720.00
584 Chromium plated Brass Wardrobe Knobe 50 mm each 630.00
585 Chromium plated Brass screws 50 mm 100 Nos 470.00
590 Chromium plated Brass curtain rod 12 mm dia 1.25mm thick metre 230.00
594 Bright finished or black enamelled mild steel butt hinges 125x65x2.12 mm 10 Nos 160.00
595 Bright finished or black enamelled mild steel butt hinges 100x58x1.90 mm 10 Nos 130.00
596 Bright finished or black enamelled mild steel butt hinges75x47x1.70 mm 10 Nos 90.00
597 Bright finished or black enamelled mild steel butt hinges50x37x1.50 mm 10 Nos 70.00
608 Nickel plated mild steel piono hinges 1 mm thick 35 mm wide metre 40.00
635 Bright finished or black enamelled mild steel screws 50 mm 100 Nos 90.00
641 Bright finished or black enamelled mild steel bolts and nuts 50x6 mm each 7.00
642 Oxidised mild steel butt hinges 125x65x2.12 mm 10 Nos 250.00
643 Oxidised mild steel butt hinges 100x58x1.90 mm 10 Nos 180.00
644 Oxidised mild steel butt hinges75x47x1.70 mm 10 Nos 100.00
645 Oxidised mild steel butt hinges50x37x1.50 mm 10 Nos 56.00
646 Oxidised mild steel parliamentary hinges150x125x27x2.8 mm 10 Nos 450.00
647 Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm 10 Nos 360.00
650 Oxidised mild steel single acting spring hinges 150 mm each 115.00
653 Oxidised mild steel double acting spring hinges 150 mm each 120.00
656 Nickel plated mild steel piono hinges 1 mm thick 35 mm wide metre 40.00
660 Oxidised mild steel sliding door bolt 300x16 mm each 82.00
661 Oxidised mild steel sliding door bolt 250x16 mm each 65.00
662 Oxidised mild steel door latch 300x20x6 mm each 45.00
663 Oxidised mild steel door latch 250x20x6 mm each 40.00
664 Oxidised mild steel tower bolt (barrel type) 250x10 mm each 40.00
668 Oxidised mild steel handles 125 mm each 13.00
669 Oxidised mild steel handles 100 mm each 10.00
670 Oxidised mild steel handles75 mm each 7.00
679 Oxidised mild steel hasps and staples(safety type) 150 mm 10 Nos 130.00
680 Oxidised mild steel hasps and staples(safety type) 115 mm 10 Nos 101.00
681 Oxidised mild steel hasps and staples(safety type)90 mm 10 Nos 76.00
682 Oxidised mild steel screws 50 mm 100 Nos 60.00


687 Anodised Aluminium butt hinges 125x75x4 mm 10 Nos 1050.00
690 Anodised Aluminium butt hinges 100x63x3.2 mm 10 Nos 850.00
696 Anodised Aluminium sliding door bolt 300x16 mm each 210.00
697 Anodised Aluminium sliding door bolt 250x16 mm each 190.00
698 Anodised Aluminium tower bolt (barrel type)300x10 mm 10 Nos 980.00
703 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 10 Nos 750.00
704 Anodised Aluminium handles 100 mm with plate 150 x 32 mm 10 Nos 650.00
705 Anodised Aluminium handles 75mm with plate 125 x 32 mm 10 Nos 550.00
706 Anodised Aluminium kicking plate 50 cm long100x3.15 mm each 140.00
713 Block board construction flush door with teak wood ply on both faces 35 mm sqm 2150.00
thick
thick
thick
717 Block board construction flush door with commercial ply on both faces 35 sqm 1550.00
mm thick
mm thick
mm thick
720 Block board construction flush door with teak wood ply on one faces 35 mm sqm 1850.00
thick
721 Block board construction flush door with teak wood ply onone faces 30 mm sqm 1650.00
thick
722 Block board construction flush door with teak wood ply on one faces 25 mm sqm 1550.00
thick
752 Block board construction flush door lipping sqm of door area 200.00
753 Square vision panel in Block board construction flush door sqm of door area 350.00
754 Circular vision panel in Block board construction flush door Sqm of doo 200.00
755 Decorative type Louvers in Block board construction flush door sqm of door area 400.00
757 Rebate cutting in Block board construction flush door sqm of door area 120.00
759 Decorative plywood 4 mm sqm 800.00
761 Fuel wood quintal 500.00
763 Glue kilogram 550.00
765 Hessian cloth sqm 25.00
768 Cement Concrete Jali 50 mm thick sqm 750.00
771 Kerosene oil litre 50.00
772 Synthetic colour Kg 165.00
773 Unslaked lime quintal 560.00
774 Khameera Kg 150.00
775 Dehradun white lime quintal 1600.00
776 Satna lime quintal 1300.00
777 Dry hydrated lime (factory made) quintal 1300.00
784 Marble dust/ powder cum 1000.00
785 Marble chips upto 4mm and downsize White & black quintal 500.00
788 Marble chips large size above 4 mm White & black quintal 500.00
789 Jhingra cum 60.00
790 MS hold fast Nos 30.00
810 Moorum cum 525.00
811 Mud (dry) cum 105.00


815 Dry distemper kilogram 55.00
816 Oil bound washable distemper/ Acrylic distemper kilogram 60.00
818 Linseed oil (double boiled) litre 200.00
820 Cement primer litre 130.00
821 Distemper primer litre 130.00
823 Pink primer (for wood) litre 170.00
826 Aluminium paint litre 300.00
827 Acid proof paint (chocolate or black) litre 150.00
828 Anticorrosive bituminous paint (black) litre 150.00
829 Black japan litre 160.00
830 Enamel paint litre 270.00
831 Floor enamel paint in all shades except green litre 270.00
833 Synthetic enamel paint in black or chocolate shade litre 250.00
834 Synthetic enamel paint in all shades except black or chocolate shade litre 265.00
835 Plastic emulsion paint litre 285.00
845 Roofing paint for iron sheets in red colour litre 165.00
850 White lead kilogram 90.00
851 Water proofing cement paint kilogram 60.00
855 Wax polish (ready made) kilogram 350.00
856 Ordinary varnish litre 90.00
857 Superior copal varnish litre 150.00
858 Superior spar varnish litre 275.00
859 Oil type wood preservative litre 90.00
863 Putty for wood work kilogram 75.00
865 Pig lead kilogram 125.00
868 Premixed super white gypsum plaster. kg 15.00
869 Plaster of Paris kilogram 8.00
870 Plug each 6.00
871 White cement based putty kilogram 25.00
873 Copper pins 6 mm dia 7.5 cm long each 15.00
874 Black colour dark shade pigment kilogram 75.00
875 Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment kilogram 70.00
876 Green or blue medium shade pigment kilogram 70.00

886 Standard holdar bat clamps for sand cast iron or cast iron pipes 150 mm dia each 40.00
887 Gur Kg 40.00
888 Methi Kg 50.00
889 Hemp Kg 30.00
890 Water for wetting of bedding sand kl 50.00
966 Sand Cast iron plain shoe 150 mm dia each 800.00
967 Copper plate kilogram 400.00
969 Pully 25 mm dia each 25.00
973 Rolling shutter made of 80x1.25 mm machine rolled laths sqm 1500.00
974 Top cover for rolling shutters metre 700.00
975 27.5 cm long wire spring grade no 2 for rolling shutters each 300.00
976 Ball bearing for rolling shutters each 450.00
977 Extra for mechanical devices chain and cranked operation for operatingrolling sqm 900.00
shutters : exceeding 10.00 sq.m and upto 16.80 sq.m area of door
978 Extra for mechanical devices chain and cranked operation for operating rolling sqm 950.00
shutters : exceeding 16.80 sq.m area of door
979 Royalty for good earth cum 30.00
980 Royalty for sludge cum 100.00
982 Coarse sand (zone III) cum 1800.00
983 Fine sand (zone IV) cum 1800.00
984 Blown Sand cum 300.00
992 Galvanised steel plain sheets quintal 7000.00
994 Standard quality hard board sheet 3 mm thick sqm 290.00
996 Standard quality hard board sheet 4.5 mm thick sqm 350.00
999 Shellac kilogram 1150.00
1000 Spirit litre 100.00
1001 Spunyarn kilogram 100.00
1002 Mild steel round bar 12 mm dia and below quintal 7400.00
1003 Mild steel round bar above 12 mm dia quintal 7400.00
1004 Average rate of Mild steel round bars for reinforcements quintal 7400.00


1005 Twisted steel / deformed bars quintal 8000.00
1006 Mild steel square bars quintal 7400.00
1007 Structurals such as tees,angles channels and R.S. joists quintal 7400.00
1008 Flats upto 10 mm in thickness quintal 7400.00
1009 Flats exceeding 10 mm in thickness quintal 7400.00
1010 Mild steel plates quintal 9600.00
1013 Mild steel sheets for tanks quintal 9600.00
1015 Mild steel expanded metal 20x60 mm strands sqm 325.00
1016 TMT bar quintal 8000.00
1019 Mild steel hooks each 35.00
1020 Mild steel rivets quintal 8000.00
1021 Hard drawn steel wire fabric sqm 550.00
1022 Galvanised steel bolts & nuts 6 mm dia and 25 mmlong round head with slots 10 Nos 25.00
1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 150.00

1024 Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with each 15.00
slots
1025 Mild stel bolts 6 mm dia and 25 mm long with hexagonal head 10 Nos 30.00
1026 Black steel barbed wire quintal 9000.00
1028 Straining bolts each 70.00
1029 Galvanised steel barbed wire quintal 7500.00
1030 Galvanised steel turn buckles each 15.00
1031 Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded each 20.00
with 4 galvanised steel nuts
1032 Galvanised steel bolts 10 mm dia and 7 cm long with nuts each 15.00
1034 Bolts and nuts upto 300 mm in length quintal 6350.00
1035 Bolts and nuts above 300 mm in length quintal 6930.00
1036 Iron pintels including welded pin each 45.00
1037 Binding wire Kg 90.00
1038 Wire mesh (rabbit) Sqm 350.00
1143 Steel beading metre 25.00
1145 Aluminium Plain Strip edging 38x12x3 mm metre 120.00
1148 Glass strip 3 mm thick 20 mm deep metre 10.00
1149 Glass strip 4 mm thick40 mm deep metre 17.00
1151 Boundry stone top chisel dressed 15x15x90 cm each 81.00
1154 Through and bond stone 100 Nos 1275.00
1157 Stone for masonary work cum 1000.00
1158 Stone for pitching 15 cm x 22.5 cm cum 650.00
1159 Stone dust cum 750.00
1160 Red sand stone block 10 cudm 70.00
1161 White/Pink sand stone block 10 cudm 80.00
1162 White sand stone 100mm thick sqm 700.00
1163 White sand stone slab 75 mm thick (un-dressed) sqm 375.00
1164 Red sand stone slab 40 mmthick (un-dressed) sqm 650.00
1165 White sand stone slab 40 mm thick (un-dressed) sqm 750.00
1166 Red sand stone slab 30 mmthick (un-dressed) sqm 350.00
1167 Stone chajja patti sqm 650.00
1168 Kota stone slab 20 mm to 25 mm thick (semi-polished) sqm 400.00
1169 Kotastone slab 40mm thick (rough chisled) sqm 250.00
1170 Katla stone pati 80 mm thick sqm 1600.00
1171 Katla stone pati 50 mm thick sqm 1500.00
1172 Stone slab sqm 600.00
1173 Kota stone slab minimum 30mm thick (semi-polished) sqm 450.00
1174 Red sand stone slab 45 mm and 50 mm thick (un-dressed) sqm 800.00
1175 White sand stone slab 45 mm and 50 mm thick (un-dressed) sqm 800.00
1177 Stone grit 6 mm and down size or pea sized gravel cum 900.00
1179 Crushed stone 2.36 mm to 12.5 mm size cum 900.00
1182 Surkhi cum 500.00
1183 Shesham wood 10 cudm 1100.00
1184 Nigeria wood 10 cudm 1350.00
1185 Ghana wood 10 cudm 1450.00
1186 Superior class teak wood such as Dandeli, Balarshah or Malabar in planks 10 cudm 1400.00
1187 First class teak wood in scantling 10 cudm 1100.00
1188 First class teak wood in planks 10 cudm 1155.00
1189 Second class teak wood in scantling 10 cudm 700.00


1190 Second class teak wood in planks 10 cudm 750.00
1191 Ivory coast 10 cudm 1100.00
1192 Chir wood 10 cudm 375.00
1194 Second class deodar wood in planks 10 cudm 750.00
1196 First class kail wood in planks 10 cudm 400.00
1197 Second class kail wood in scantling 10 cudm 290.00
1198 Second class kail wood in planks 10 cudm 310.00
1199 Sal wood in scantling 10 cudm 500.00
1201 Precast terrazo tiles 22 mm thick (light shade) sqm 225.00
1202 Precast terrazo tiles 22 mm thick(medium shade) sqm 200.00
1203 Precast terrazo tiles 22 mm thick (dark shade) sqm 190.00
1204 Precast terrazo tiles 20 mm thick for roof sqm 175.00
1207 G.I. Limpet washer 100 Nos 30.00
1208 Bitumen washer 100 Nos 25.00
1209 G.I. plain washer thick 100 Nos 40.00
1210 G.I. plain washer thin 100 Nos 30.00
1211 G.I. plain washer for seam bolts 100 Nos 30.00
1213 Water proofing materials kilogram 40.00
1214 Welding by gas plant cm 5.00
1215 Welding by electric plant cm 5.00
1216 Whiting quintal 735.00
1218 Spigot for standard jointing kilogram 60.00
1219 Wire nails kilogram 60.00
1220 Wire mesh (rabbit) sqm 225.00
1221 20 mm dia holding down bolts quintal 5500.00
1222 Mild steel sheets with bolts and nuts to rest on pintels each 125.00
1224 Hard drawn steel wire quintal 5500.00
1225 Mild steel flat strap fitting quintal 5200.00
1227 Chequered terrazo tiles 22 mm thick(light shade) sqm 200.00
1228 Chequered terrazo tiles 22 mm thick(medium shade) sqm 190.00
1229 Chequered terrazo tiles 22 mm thick (dark shade) sqm 180.00
1231 Extra for selected planks of second class teakwood 10 cudm 125.00
1234 Aluminium Plain Strip edging 57x12x3 mm metre 175.00
1235 Diesel oil litre 100.00
1237 Cutting marble or sand stone slab upto 50 mm thick by mechanical device metre 20.00
1238 Extra for selected planks of first class teakwood 10 cudm 175.00
1241 Commercial LPG in cylinder. kg 130.00
1301 Bleaching powder quintal 1900.00
1304 Surface box for stop cock each 100.00
1305 Surface box for sluice valve each 200.00
1307 Surface box for water meter each 325.00
1309 C.I. bracket for wash basin and sinks pair 105.00
1314 C.P.brass chain with 32 mm dia rubber plug each 75.00
1315 C.P.brass chain with 40 mm dia rubber plug each 130.00
1330 Clamps and M.S. stays including bolts and nuts for 100 mm pipe each 100.00
1331 M.S.Holder bat clamp of approved design for 100 mm S.C.I. pipe each 50.00
1332 M.S.Holder bat clamp of approved design for75 mm S.C.I. pipe each 41.00
1336 Clearing eye with chain and lid 100 mm dia each 52.00
1337 Clearing eye with chain and lid 150 mm dia each 58.00
1339 Brass bib-cock 15 mm dia each 400.00
1340 Brass bib-cock 20 mm dia each 450.00
1342 Brass stop-cock 15 mm dia each 410.00
1343 Brass stop-cock 20 mm dia each 525.00
1350 Mosquito proof coupling of approved design each 35.00
1352 C.I. cover and frame 300x300 mm inside each 500.00
1353 C.I.cover without frame 300x300mm inside i.e.cover of 4.50 kg each 400.00
1354 Rectangular cover 455x610 mm with frame (low duty) each 2200.00
1355 Rectangular cover 455x610mm without frame (low duty) each 1300.00
1356 500 mm dia cover with frame (medium duty) each 6500.00
1357 500 mm dia cover without frame (medium duty) each 3200.00
1358 ferrow cement cover and frame 300x300 mm inside each 250.00
1360 C.I.mouth, brass ferrule 15 mm dia each 140.00


1363 Vitreous china foot rests 250x130x30 mm pair 175.00
1364 C.I. grating 100x100 mm each 70.00
1369 S.C.I. gully or nahani grating 100 mm dia each 70.00
1373 Rubber insertions for80 mm dia pipe joints each 13.00
1374 Rubber insertions for 100 mm dia pipe joints each 17.00
1391 bevelling/teak wood lipping of mirror 60x45cm each 450.00
1392 Mirror of superior make glass 60x45 cm Each 380.00
1393 Mirror of superior make 4mm thick Sqm 1100.00
1396 Vitrous china pedestal for wash basin each 2400.00
1397 Pig lead kilogram 200.00
1402 Squatting Pan (Indian type) white glazed vitreous China Ist quality W.C. Pan each 500.00
Size 450 mm.
Size 510 mm.
Size 580 mm.
1405 100 vitrious china P or S Trap each 400.00
1406 Indian type white glazed vitreous china Ist quality W.C. orissa pan each 1700.00
Size 530x410mm.
1407 Indian type white glazed vitreous china Ist quality W.C. orissa pan each 2300.00
Size 580x440 mm.
1408 Carriage and fixing of material (Seat Cover etc.) each 10.00
1409 European type white glazed vitreous china Ist quality W.C. pan each 2000.00
1410 European type white glazed vitreous china Ist quality Double symphonic each 5600.00
W.C.
1411 European type white glazed vitreous china Ist quality W.C. Wall Mounting. each 3100.00
1412 European type white glazed vitreous china Ist quality W.C. Wall each 3470.00
Mounting.(extended)
1413 European type white glazed vitreous china Ist quality W.C. Wall Mounting each 4085.00
(syphonic)
1414 White glazed Conversion Bend for W.C. from P trap to S trap each 400.00
1415 White Vitreous China Double Syphonic European W.C.with mounted W.V.C. each 11000.00
flushing cistern of of 10 litre capacity
1416 WVC Urinal Flat Back (small) size 440x265x315 mm. each 1600.00
1417 WVC Urinal Flat Back (large) or half stall size 590x375x390 mm. each 5400.00
1418 WVC Urinal Mini stall size 440x315x320 mm. each 1800.00
1420 Dome Waste coupling for urinal 32 mm each 250.00
1421 Iron bracket/Plugs & Screws for urinal installation pair 100.00
1422 W.V.C. Urinal Partition plate size 630x315 each 900.00
1423 Marble Urinal Partition slab both sides polished size 900x600mm.Makrana II each 750.00
quality marble having light spots.
1424 Marble Urinal Partition slab both sides polished size 900x600mm. Makrana II each 700.00
quality marble having light spots.
1425 Marble Urinal Partition slab both sides polished size 900x600mm. Makrana each 650.00
'Adanga' or Raj Nagar ISt Quality White or Andhi Indi-Italian marble.
1426 W.V.C. Half-Round Channel Size 100 mm dia. Mtr 460.00
1427 W.V.C. Half-Round Channel Size 150 mm dia. Mtr 620.00
1428 High Level Flushing Cistern of 10 Litres capacity each 1030.00
1429 32mm G.I. Flush pipe each 240.00
1430 over flow pipe 185cm each 160.00


1431 brackets each 72.00
1432 Low level Flushing Cistern of 10 litres capacity : WVC with C.P. brass bend. each 2000.00
1433 Low level Flushing Cistern of 10 litres capacity : PVC with PVC bend as per each 1300.00
IS : 7231
1434 Low level Flushing Cistern of 10 litres capacity : PVC with PVC bend and each 1700.00
superior internal fittings
1435 Low level Flushing Cistern of 10 litres capacity : WVC for symphonic EWC. each 2000.00
1436 Low level Flushing Cistern of 10 litres capacity : PVC with CP brass long each 1600.00
band.
1437 Automatic Flushing Cistern each 1120.00
1438 bend each 150.00
1439 G.I. Flush pipe 'B' class (Concealed) 25 mm. each 305.00
1440 G.I. Flush pipe 'B' class (Concealed) 32 mm. each 375.00
1441 M.S. clamps each 48.00
1442 Flush pipe PVC exposed (heavy) 32 mm. each 85.00
1443 Flush pipe GI (Sheet) hot galvanized exposed (10 Litres). each 121.00
1444 WVC (10 litres) low-level flushing cistern with cover. each 760.00
1445 WVC (10 litres) low level flushing cistern cover only. each 270.00
1446 WVC siphon with plunger plate only. each 170.00
1447 WVC Auto cistern with cover only. each 400.00
1448 WVC Auto cistern cover only. each 120.00
1449 C.P. brass Urinal Flush pipe set For 4 Urinals. each 1060.00
1453 C.P. brass Urinal Spreader for stall urinal each 315.00
1454 Synthetic (PTMT) Urinal Spreader for stall urinal each 255.00
1455 Dome Waste coupling for urinal 40 mm each 195.00
1456 Plastic Syphon of approved make for automatic flush tank. each 210.00
1457 Copper tube Syphon for auto flush tank. each 435.00
1458 C.P. Brass flush Valve Lever type with Elbow 32 mm dia. each 2645.00
1459 C.P. Brass flush Valve Push type with Elbow 32 mm dia. each 2780.00
1460 flush Bend each 485.00
1461 C.P. Brass flush Valve Concealed type for 112 mm. each 3250.00
1462 C.P. Brass flush Valve for 225 mm each 3360.00
1464 S & S.C.I.standard specials upto 300 mm dia (heavy class) quintal 3510.00
1466 S & S.C.I.standard specials over 300 mm dia (heavy class) quintal 3800.00
1468 Flanged C.I. standard specials upto 300 mm dia(heavy class) quintal 6300.00
1470 Flanged C.I. standard specials over 300 mm dia(heavy class) quintal 6700.00
1472 Casing pipe 100 mm dia metre 430.00
1532 Flush pipe with union spreaders and clamps all in C.P. brass for single stall each 300.00
1533 Flush pipe with union spreaders and clamps all in C.P. brass for double stall each 490.00
1534 Flush pipe with union spreaders and clamps all in C.P. brass for range of three each 610.00
stall
1535 Flush pipe with union spreaders and clamps all in C.P. brass for range of four each 680.00
stall
1540 Flush pipe and spreaders G.I.for single set of one squatting plate urinal each 200.00
1541 Flush pipe and spreaders G.I.for range of two squatting plates urinal each 300.00
1542 Flush pipe and spreaders G.I.for range of three squatting plates urinal each 370.00
1543 Flush pipe and spreaders G.I.for range of four squatting plates urinal each 470.00
1545 G.I. pipes 15 mm dia (B Class) metre 160.00
1555 G.I. back (jam) nuts25 mm dia each 8.00
1559 G.I. back (jam) nuts65 mm dia each 27.00
1608 G.I. tees (equal) 25 mm each 65.00
1612 G.I. tees (equal) 65 mm each 370.00
1614 G.I. inlet connection each 86.00
1615 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:50mm dia each 1180.00


1616 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:75mm dia each 1590.00
1617 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 100mm dia each 2020.00
1618 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 150mm dia each 3675.00
1620 S.C.I. plain bend75mm dia each 391.00

1621 S.C.I. plain bend 100mm dia each 575.00
1622 S.C.I. plain bend 150mm dia each 1210.00
1624 S.C.I. bend with access door 75mm dia each 475.00
1625 S.C.I. bend with access door 100mm dia each 650.00
1627 S.C.I. plain single equal junctions75x75x75 mm dia each 325.00
1628 S.C.I. plain single equal junctions100x100x100 mm dia each 420.00
1630 S.C.I. single equal junctions75x75x75 mm dia with access door. each 360.00
1631 S.C.I. single equal junctions 100x100x100 mm dia with access door. each 470.00
1633 S.C.I. plain double equal junctions 75x75x75x75 mm dia each 470.00
1634 S.C.I. plain double equal junctions100x100x100x100 mm dia each 625.00
1636 S.C.I. double equal junctions75x75x75x75 mm dia with access door. each 530.00
1637 S.C.I. double equal junctions 100x100x100x100 mm dia with access door. each 660.00
1639 Slotted cowl (terminal guard )75 mm dia each 175.00
1640 Slotted cowl (terminal guard ) 100 mm dia each 241.00
1641 G.I. Union 15 mm nominal bore each 62.00
1648 G.I. Union 80mm nominal bore each 995.00
1649 Polyethylene water storage tank with cover and suitable locking arrangement per litre 7.00
1653 Sand cast iron S&S plain single unequal junctions : 100x100x75 mm dia each 460.00
1656 Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with each 510.00
access door.
1659 Sand cast iron S&S plain double unequal junctions : 100x100x75x75 mm dia each 675.00
1662 Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia with each 720.00
access door.
1666 Sand cast iron heel rest bend75mm dia each 261.00
1667 Sand cast iron heel rest bend 100mm dia each 315.00
1669 S.C.I. single equal invert branch of required degree75x75x75 mm dia each 380.00
1670 S.C.I. single equal invert branch of required degree 100x100x100 mm dia each 510.00
1672 S.C.I. double equal invert branch of required degree 75x75x75x75 mm dia each 500.00
1673 S.C.I. double equal invert branch of required degree 100x100x100x100 mm each 670.00
dia
1674 S.C.I. single unequal invert branch of required degree100x100x75 mm dia each 610.00
1677 S.C.I. double unequal invert branch of required degree 100x100x75x75 mm each 730.00
dia
1682 S.C.I. door pieces 75 mm dia each 335.00
1683 S.C.I. door pieces 100 mm dia each 465.00
1685 S.C.I. collar 75 mm dia each 130.00
1686 S.C.I. collar 100 mm dia each 175.00
1687 Unplasticised P.V.C.connection pipe with brass union 30 cm long 15 mm bore each 28.00
1693 S.C.I. hand pump each 630.00

1700 R.C.C. pipes NP2 class 100 mm dia meter 475.00


1714 R.C.C. collarsNP2 class 100 mm dia each 28.00
1854 Stoneware pipes grade A (60 cm long) 100 mm dia each 100.00
1863 Fire clay kitchen sink: 600x450x250 mm each 3700.00
1864 Fire clay kitchen sink: 600x450x200 mm each 3500.00
1865 White vitreous china laboratry sink 530x430x180 mm. each 1600.00
1866 White vitreous china laboratry sink 500x350x150 mm. each 1900.00
1867 Mosaic fine polished kitchen sink size 600x450x200 mm. each 550.00
1868 Mosaic fine polished kitchen sink size 450x450x200 mm. each 390.00
1869 Mosaic fine polished kitchen sink size 600 x 450 x 200 mm with 600 x each 770.00
450mm drain board
1871 White vitreous china laboratry sink450x300x150 mm each 1600.00
1872 White vitreous china laboratry sink600x450x200 mm each 2400.00
1873 Drain Board WVC (I.S.: 2556 Mark) size 530 x 450mm each 1075.00
1874 Drain Board Mosaic fine polished size 600 x 450 each 210.00
1875 White plastic seat (solid)with lid C.P.brass hinges and rubber buffers each 650.00
1876 Black plastic seat (solid) with lid C.P.brass hinges and rubber buffers each 600.00
1878 Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia each 43.00
1879 Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia each 60.00
1881 Spun yarn kilogram 200.00
1882 Strainer brass 40 mm dia 1.5 metre long each 65.00
1885 15 mm C.P.brass tap each 190.00
1889 C.P.brass toilet paper holder of standard size each 300.00
1891 C.I. trap for standard urinal with vent arm with operating and other couplings each 191.00
in C.P.brass: 50 mm dia
1893 C.I. trap for standard urinal with vent arm with operating and other couplings each 241.00
in C.P.brass: 80 mm dia
1894 CI P trap each 890.00
1895 C.P.brass trap40 mm dia each 150.00
1896 100 mm S.C.I. trap with vent heel each 400.00
1897 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet each 350.00
1898 100 mm S.C.I. trap with 100 mm inlet and75 mm outlet each 250.00
1900 S.W. gully trap P type 100x100 mm each 83.00
1913 Vitros china lipped front urinal each 800.00
1915 Vitros china squatting plate urinal Size 450x350mm each 800.00
1922 H.P. or L.P. ball valve with polythene floats: 15 mm dia each 250.00


1927 Brass full way valve with C.I. wheel (screwed end) 25 mm dia each 410.00
1933 Gunmetal non-return valve-horizontal (screwed end) 25 mm dia each 420.00
1940 C.I.sluice valve (with caps) class I : 100 mm dia each 3000.00
1947 Vitreous china flat back wash basin 630x450 mm each 930.00
1949 Vitreous china angle back wash basin 600x480 mm each 860.00
1950 Vitreous china angle back wash basin 400x400 mm each 550.00
1951 C.P. brass waste coupling 32 mm each 115.00
1953 Vitreous china indian type w.c. pan size 580 mm each 530.00
1954 Vitreous china orrisa type w.c. pan size 580 mm each 1280.00
1955 Vitreous china pedestal type water closet each 1015.00
1956 Bolts and nuts 16 mm dia 60 mm long each 14.00
1965 White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use each 5500.00
as sequatting pan or European type water closet as per manufacturer's
specifications
1967 SS waste coupling 125 mm each 280.00
1968 P.V.C Waste pipe with C.P nut 32 mm each 150.00
1969 P.V.C Waste pipe with C.P. nut 40 mm dia each 170.00
1970 P.V.C Waste pipe with PVC nut 32 mm each 70.00
1971 P.V.C Waste pipe with C.P nut 40 mm each 170.00
1972 Waste pipe with G.I(B class) 25mm each 170.00
1973 Waste pipe with G.I(B class) 32mm each 230.00
1974 Waste pipe with G.I(B class) 40 mm each 380.00
1979 Vitreous china foot rests 250x125x25 mm pair 140.00
1980 Flyash cum 12.00
1984 F.P.S. bricks tile class designation 100 1,000 Nos 4500.00
1986 Modular bricks class designation 75 1,000 Nos 6000.00
2200 Carriage of steam coal tonne 0.00
2201 Carriage of Bricks 1,000 Nos 0.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.00
2203 Carriage of Coarse sand cum 0.00
2204 Carriage of Timber cum 0.00
2205 Carriage of Steel tonne 150.00
2206 Carriage of Stone aggregate 40 mm nominal size and above cum 0.00
2207 Carriage of Brick tiles 1,000 Nos 0.00
2208 Carriage of Lime cum 0.00
2209 Carriage of Cement tonne 0.00
2210 Carriage of Shree binder tonne 0.00
2211 Carriage of Tar bitumen tonne 0.00


2215 Carriage of Soling stone & masonary stone cum 0.00
2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne 0.00
2224 Carriage of S.W. pipes100 mm dia 100 metre 0.00
2241 Carriage of Good earth cum 0.00
2242 Carriage of Dump manure cum 0.00
2260 Carriage of Brick aggregate cum 0.00
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) cum 0.00
2262 Flyash cum 0.00
2264 Carriage of Rubbish cum 0.00
2265 Carriage of Moorum cum 0.00
2266 Carriage of Surkhi cum 0.00
2267 Carriage of Stone dust cum 0.00
2268 Carriage of Marble dust and marble chips cum 0.00
2271 Carriage of G.I. pipes below 100 mm dia tonne 0.00
2273 Carriage of A.C.sheet and accessories tonne 0.00
2275 Carriage of R.C.C. pipes 100 mm dia 100 metre 0.00
2299 Carriage of R.C.C. pipes 450 & 500 mm dia 100 metre 0.00
2302 Carriage of G.I.sheet and accessories tonne 0.00
2303 Carriage of R.C.C. pipes 600, 700, 750 & 800 mm dia 100 metre 0.00
2308 Carriage of Plaster of paris tonne 0.00
2309 Carriage of Cast iron fittings tonne 0.00
2311 Carriage of Red bajri cum 0.00
2314 Carriage of Barbed wire tonne 0.00
2317 Carriage of Sludge cum 0.00
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 0.00
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre 0.00
2330 Carriage of C.I. pipes 500 mm dia 100 metre 0.00
2335 Carriage of Jamuna sand cum 0.00
2341 Carriage of Pig lead tonne 0.00
2342 Carriage of solvent/ Diesel. quintal 0.00
2343 Carriage of ductile iron pipes (k7) 100 mm dia 100 metre 0.00
2344 Carriage of cast iron pipes 150 mm dia 100 metre 0.00


2391 Strips-Aluminium fluted 3.15mm thick and 150mm wide metre 350.00
2392 Strips Aluminium fluted 3.15mm thick and 200mm wide metre Metre 450.00
2393 5mm thick Acrylic sheet (150mm wide) Metre 60.00
2406 Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). sqm 450.00
2407 Float glass sheet of nominal thickness 5 mm.(weight not less than 13.50 sqm 550.00
kg/sqm).
2408 Float glass sheet of nominal thickness 8 mm sqm 950.00
2412 Ply wood 5 ply with commercial ply on both faces 6 mm thick sqm 515.00
2413 5 mm tinted glass sqm 650.00
2414 5 mm reflected glass sqm 800.00
2447 Hollock ballies 125 mm diameter metre 60.00
2449 Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with each 45.00
screws,bolts,nuts and washers complete
2451 Brass cupboard lock 6 levers (best make of approved quality) 40 mm size each 250.00
2455 Brass hanging type door stopper 150 mm each 75.00
2456 Hydraulic door closer bottle type M.S. body with necessary accessories and each 1050.00
screws complete
2459 Anodised Aluminium hanging type door stopper each 25.00
2464 Anodised Aluminium pull bolt lock (locking bolt) of size 85 mmx42 mm with each 50.00
screws,bolts,nuts and washers complete
2465 Anodised Aluminium Casement stay 250 mm each 60.00
2466 Hollock wood in scantling 10 cudm 470.00
2467 Chromium plated Brass pull bolt lock (locking bolt) of size 85 mmx42 mm each 185.00
with screws,bolts,nuts and washers complete
2468 Nickled Chromium Brass cupboard lock 40 mm size each 150.00
2480 Ply wood 5 ply with teak ply on both faces 9 mm thick sqm 1050.00
2481 Ply wood 5 ply with teak ply on one face and commercial ply on another face sqm 850.00
9 mm thick
2482 6 mm thick commercial ply sqm 350.00
2484 9 mm teak ply BWR one side sqm 1050.00
2485 9 mm teak ply BWR both side sqm 1350.00
2488 12mm teak ply BWR both side sqm 1470.00
2489 0.6 mm mica sqm 300.00
2490 0.8 mm mica sqm 450.00
2491 1 mm mica sqm 700.00
2495 12 mm thick Acoustical Board sqm 800.00
2496 12 mm thick one side laminated board Practical board (Phenol bonded) sqm 950.00
2497 50 mm glass whool sqm 550.00
2498 Hassian cloth with fibre glass sqm 250.00
2500 Extra for selected planks of second class deodarwood 10 cudm 120.00
2504 Kiln seasoning of timber cum 1050.00
2505 Hollock wood in planks 10 cudm 500.00
2602 F.P.S. bricks class designation 75 1,000 Nos 4500.00
2603 F.P.S. bricks class designation 50 1,000 Nos 4200.00
2704 Aluminium Strip 40 mm wide and 2 mm thick kilogram 325.00
2710 White marble makranasecondquality plain veined stone pieces for crazy quintal 170.00
flooring
2750 8 mm thick granite stone tiles (mirror polished of all shades) sqm 770.00
2751 8 mm thick marble tiles (polished) Raj Nagar sqm 400.00


2903 Stone chippings/ screenings 4.75 mm nominal size cum 1100.00
2904 Stone chippings/ screenings 150 micron nominal size cum 1100.00
2908 Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size cum 405.00
2909 Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size cum 470.00
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum 810.00
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum 810.00
2914 Solvent kilogram 35.00
2916 Paving Asphalt 80/100 penetration tonne 52000.00
3002 Polyvinyle chloride sheet 400 micron thick sqm 37.00
3004 Stone ware spouts 100 mm dia 60 cm long each 41.00
3050 Galvanised steel corrugated sheets quintal 7000.00
3213 Vitreous china Surgeon type wash basin of size 660x460 mm each 1300.00
3228 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass each 175.00
brackets and guard rail of standard size
3311 C.I.sluice valve (with caps) class II : 100 mm dia each 2750.00
3617 C.P.brass union 40 mm dia each 165.00
3620 C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:100mm dia each 1400.00
3621 C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:75mm dia each 1150.00
3624 S.C.I. S&S bends with access door100mm dia each 250.00
3625 S.C.I. S&S bends with access door75mm dia each 250.00
3628 S.C.I. S&S bend100mm dia each 270.00
3629 S.C.I. S&S bend75mm dia each 200.00
3634 S.C.I. S&S heel rest sanitary bend 100mm dia each 330.00
3635 S.C.I. S&S heel rest sanitary bend 75mm dia each 290.00
3640 S.C.I. S&S single equal junctions100x100x100 mm each 520.00
3641 S.C.I. S&S single equal junctions75x75x75 mm each 390.00
3644 S.C.I. S&S single equal junctions with access door 100x100x100 mm each 560.00
3645 S.C.I. S&S single equal junctions with access door 75x75x75 mm each 410.00
3650 S.C.I. S&S double equal junctions100x100x100x100 mm each 650.00
3651 S.C.I. S&S double equal junctions75x75x75x75 mm each 520.00
3654 S.C.I. S&S double equal junctions with access door 100x100x100x100 mm. each 700.00
3655 S.C.I. S&S double equal junctions with access door 75x75x75x75 mm. each 560.00
3660 S.C.I. S&S single unequal junctions100x100x75 mm each 650.00
3664 S.C.I. S&S single unequal junctions with access door 100x100x75 mm each 730.00
3670 S.C.I. S&S double unequal junctions100x100x75x75 mm each 900.00
3674 S.C.I. S&S double unequal junctions with access door 100x100x75x75 mm each 980.00
3681 S.C.I. S&S single equal invert branch of required degree 100x100x100 mm each 455.00
dia
3682 S.C.I. S&S single equal invert branch of required degree 75x75x75 mm dia each 345.00
3685 S.C.I. S&S double equal invert branch of required degree100x100x100x100 each 580.00
mm dia
3686 S.C.I. S&S double equal invert branch of required degree 75x75x75x75 mm each 470.00
dia
3690 S.C.I. S&S single unequal invert branch of required degree100x100x75 mm each 590.00
dia
3695 S.C.I. S&S double unequal invert branch of required degree100x100x75x75 each 800.00
mm dia
3699 S.C.I. S&S, 75 mm offset for75 mm dia pipe each 250.00
3728 S.C.I. S&S door pieces 100 mm dia each 325.00
3729 S.C.I. S&S door pieces 75 mm dia each 250.00


3733 S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm each 220.00
3734 S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm each 200.00
3738 S.C.I. S&S, collars 100 mm each 230.00
3739 S.C.I. S&S, collars 75 mm each 160.00
3749 Vitreous china toilet paper holder of standard size each 150.00
3860 560 mm dia cover with frame (Heavy duty) each 3000.00
3861 560 mm dia cover without frame (Heavy duty) each 2600.00
4006 Pressed steel door frames (mild steel sheet 1.25mm) Profile "A" metre 350.00
4007 Pressed steel door frames (mild steel sheet 1.25mm) Profile "B" metre 375.00
4008 Pressed steel door frames (mild steel sheet 1.25mm) Profile "C" metre 400.00
4009 Mild steel tubes hot finished welded type kilogram 87.00
4010 Mild steel tubes hot finished seamless type kilogram 110.00
4011 Mild steel tubes electric resistant or inductionbutt welded kilogram 80.00
4012 Circular C.I. Box for ceiling fan each 60.00
4013 Pully 40 mm dia each 40.00
4014 Ready made steel door with necessary hinges, lugs and glazing clips excluding sqm 2200.00
other fittings & their fixing
4201 Aluminium primer litre 225.00
4202 Red oxide Zinc chromate primer litre 240.00
4203 Copper acetate kilogram 350.00
4204 Hydrochloric acid kilogram 35.00
4205 Copper chloride kilogram 350.00
4206 Copper nitrate kilogram 250.00
4207 Ammonium chloride kilogram 20.00
5001 Mobil oil litre 150.00
6001 White marble slab Makrana second quality plain veined 18 mm thick sqm 4000.00
6007 Pink marble slab plain 18mm thick sqm 950.00
6010 Udaypur green marble slab plain 18mm thick sqm 800.00
6019 Black Zebra marble slab plain 18mm thick sqm 650.00
6501 Sand zone V () cum 300.00
6502 Sand as per Table 1500. 5 cum 1000.00
7001 Brass 100mm mortice latch and lock with6 levers without pair of handles each 400.00
7003 Pair of Anodised Aluminium lever handles for 100mm mortice latch and lock each 260.00
7005 Vitreous china 10 litres low level cistern without fittings each 1500.00
7006 Vitreous china 10 litres low level cistern with fittings each 2000.00
7008 F.P.S. clay fly ash bricks class designation 75 1,000 Nos 4400.00
7009 Gypsum board sqm 300.00
7010 Ceiling sections metre 58.00
7011 Perimetre channel metre 35.00
7012 Intermediate channel metre 61.00
7013 Ceiling angle metre 23.00
7014 Connecting clips each 7.00
7015 Soffit cleat each 4.00
7016 Joint filler kilogram 29.00
7017 Joint finisher kilogram 32.00
7018 Joint tape roll roll 162.00
7019 Dash fastner/ chemical fastener each 14.00
7020 All drive screws ( for gypsum board) 100 Nos 58.00
7021 Primer ( for gypsum board) litre 130.00
7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C. litre 220.00
7023 Chromium plated brackets ( curtain rods) each 7.00
7024 Acid Proof cement tonne 9820.00
7027 M.S. Butt hinges 125x90x4 mm 10 Nos 120.00
7029 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. sqm 200.00
of wire 0.63 mm
7032 Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 sqm 725.00
kg/sqm)
7034 Nickle plated M.S. pipe 20 mm dia. metre 73.00
7035 Nickle plated M.S. Brackets for curtain rod 20 mm each 4.00
7036 Nickle plated M.S. Brackets for curtain rod 25 mm each 6.00
7042 Mild steel conduit pipe (heavy type) ISI marked-20 mm dia. metre 61.00


7043 Mild steel conduit pipe (heavy type) ISI marked-25 mm dia. metre 69.00
7044 Rolling shutters of 80x0.90 mm laths sqm 890.00
7045 Rolling shutters of 80x1.2 mm laths sqm 1020.00
7046 Top cover of Rolling shutters 0.90 mm thick metre 460.00
7047 Top cover of Rolling shutters 1.20 mm thick metre 520.00
7048 Rawl plug 50 mm (designation 10 no.) each 9.00
7049 Teak wood lipping of size 25x3 mm in pelmets metre 23.00
7055 Flat pressed 3 layer and graded particle board (medium density) Grade 1 sqm 420.00
conforming to IS : 3087 - 18 mm thick
7056 Aluminium tee channel (heavy duty) with rollers and stop end metre 48.00
7059 Aluminium hanging floor door stopper with twin rubber & stopper each 61.00
7060 Hydraulic door closer tubular type Aluminium section body each 1600.00
7063 Oxidised M.S.casement stay (straight peg type) 300 mm not less than 0.33 kg each 21.00
7068 Extra for providing grilled rolling shutters with 8 mm dia M.S. rod sqm 295.00
7070 Chequered precast cement concrete tiles 22mm thick using marble chips of sqm 170.00
size 6mm - Light shade using white cement
7071 White marble Raj Nagar plain 20 mm thick (slab area 0.10 sqm to 0.20 sqm) sqm 650.00
7077 Acid and alkali resistant tiles 300x300 mm size, 10 mm thick 10 Nos 650.00
7087 S.C.I. Tee 150 mm each 800.00
7090 Expanded polystyrene type N- Normal sqm 165.00
7091 Expanded polystyrene type - SE sqm 200.00
7092 Stainless steel kitchen sink Size 18x16x6 inches each 3200.00
7095 Stainless steel kitchen sink - with drain board bowl depth 250 mm. each 6900.00
7096 Stainlees steel kitchen sink - with drain board 510 x 1040mm bowl depth 225 each 6430.00
mm.
7097 Stainlees steel kitchen sink - with drain board 510 x 1040mm bowl depth 200 each 5730.00
mm.
7098 Stainless steel kitchen sink - with drain board 510x1040mm bowl depth 178 each 3630.00
mm
7099 Stainless steel kitchen sink Size 37x18x7 inches with drain board each 7700.00
7100 Stainless steel kitchen sink Size 45x20x8 inches with drain board each 10825.00
7101 Stainless steel kitchen sink - without drain board 610x510mm bowl depth 200 each 3780.00
mm
mm.
mm
7104 Coloured Orissa pattern W.C. pan 580x440 mm each 3220.00
7105 Coloured Pedestal type W.C. pan (European type) each 2600.00
7106 Coloured Vitreous china 10 lit. low level cistern each 2100.00
7107 Coloured (other than black) solid P.V.C. seat in European W.C. pan each 400.00
7108 Non-breakable of other approved make Black.seat in European W.C. pan each 250.00
7109 Non-breakable of other approved make White.seat in European W.C. pan each 300.00
7110 Non-breakable of other approved make Coloured.seat in European W.C. pan each 350.00
7111 C.P. lugs for toilet seat cover. 95.00

7112 Circular shape 500 mm dia Mirror with Plastic moulded frame each 460.00
7113 Rectangular shape 500x400 mm Mirror with Plastic moulded frame each 450.00
7114 Ovel shape 450x350 mm (outer dimensions) Mirror with Plastic moulded each 500.00
frame
7115 Rectangular shape 1500x450 mm Mirror with Plastic moulded frame each 900.00
7116 Hard board 6 mm thick sqm 210.00
7117 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length each 80.00
not less than 700 mm i/c PVC waste fittings


7118 Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length each 90.00
not less than 700 mm i/c PVC waste fittings
7119 Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia each 60.00
with length not less than 700 mm i/c PVC waste fittings
7120 Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia each 70.00
with length not less than 700 mm i/c PVC waste fittings
7123 Coloured High density polythylene/ poly propylene 10 lit. (full flush) capacity each 1050.00
controlled low level flushing cistern with fittings
7126 White Vitreous china 10 lit. (full flush) capacity controlled low level flushing each 1420.00
cistern with all fittings
7127 Coloured Vitreous china 10 lit. (full flush) capacity controlled low level each 2110.00
flushing cistern with all fittings
7128 S.W. intercepting trap 100 mm dia each 275.00
7129 S.W. intercepting trap 150 mm dia each 350.00
7130 Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - each 1270.00
L.D. - 25
7131 Square shape 350x350 mm precast R.C.C. manhole cover with frame - L.D. - each 870.00
25
7132 Circular shape 450 mm dia precast R.C.C. manhole cover with frame - L.D. - each 1040.00
25
7133 Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - each 2310.00
M.D. - 10
7134 Circular shape 500 mm dia precast R.C.C. manhole cover with frame - M.D. - each 2310.00
10
7135 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - H.D. - each 2900.00
20
7136 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - E.H.D. each 3300.00
- 35
7137 Factory made 35 mm thick shutters with laminated veneer lumber styles rails sqm 2250.00
as per TADS IS:1995 and panels of 12 mm thick plain type-I, medium density
flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985
bonded with BWP type synthe
as per TADS IS:1995 and panels of 12 mm thick both sides prelaminated
type-I, medium density flat pressed three layer, graded particle board (FPT-I)
as per IS:3087-1985 bonded w
as per TADS IS:1995 and panels of 12 mm thick one side prelaminated type-
I, and other side balancing lamination, medium density flat pressed three
layer, graded particle board.
as per TADS IS:1995 and panels of sheet glass using 10 kg/ sqm glass panes
as per TADS IS:1995 and panels of galvanised wire gauge with average width
of aperture 1.4 mm on both directions with wire of dia 0.63 mm
as per TADS IS:1995 and panels of galvanised wire gauge with average width
of aperture 1.4 mm on both directions with wire of dia 0.63 mm
7157 Laminated veneer lumber confirming to TADSS IS:1995 manufactured in 10 cudm 850.00
factory in frames of doors, windows
7181 C.I. pile shoe kilogram 53.00
7182 M.S. clamps for pile shoe kilogram 46.00
7183 Bentonite tonne 3700.00
7184 Oxidised M.S. safety chain (weighing not less than 450 gms) for door each 69.00
7187 C.I. grating 150 mm dia. (Weighing not less than 440 gm) each 52.00
7188 U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 75 mm dia. metre 150.00
7189 U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 110 mm metre 275.00
dia.
7190 U-PVC pipes (working pressure 4 kg / cm^2) Rubber (Seal) Ring 75 mm dia. each 25.00
7191 U-PVC pipes (working pressure 4 kg / cm^2) Rubber (Seal) Ring 110 mm each 30.00
dia.


7192 UPVC coupler for UPVC drainage pipes 75 mm each 57.00
7193 UPVC coupler for UPVC drainage pipes 110 mm each 75.00
7194 UPVC pushfit coupler (single) 75 mm thick each 90.00
7195 UPVC pushfit coupler (single) 110 mm thick each 137.00
7196 UPVC single equal Tee (with door) 75x75x75 mm each 158.00
7208 UPVC bend 87.5o 75 mm bend each 96.00
7209 UPVC bend 87.5o 110 mm bend each 160.00
7212 UPVC plain shoe 75 mm bend each 200.00
7213 UPVC plain shoe 110 mm bend each 375.00
7214 UPVC pipe clip 75 mm bend each 29.00
7215 UPVC pipe clip 110 mm bend each 57.00
7231 Resin Bonded Glass wool 16 kg/m³ 50 mm thick sqm 221.00
7232 Resin Bonded Glass wool 24 kg/m³ 50 mm thick sqm 332.00
7233 Fibre glass tissue reinforcement Type II Grade I sqm 126.00
7236 Precast chequered cement tiles 22 mm thick Dark shade using ordinary sqm 200.00
cement
7237 Precast chequered cement tiles 22 mm thick medium shade using 50% white sqm 250.00
cement, 50% ordinary cement
7239 Epoxy paint litre 400.00
7240 Fire retardant paint litre 450.00
7241 Melamine polish litre 350.00
7242 Expoxy primer for steel lt 2050.00
7243 Expoxy harder and resin kg 1150.00
7244 Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble stone - sqm 2000.00
18 mm thick
7245 Table rubbed polished stone 18mm thick (75x50cm) Granite stone - 18mm sqm 2250.00
thick
7246 Verticle load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) per test 27200.00
including installation of loading platform and prepration of pile head or
construction of test cap and dismantling of test cap after test etc. complete as
per specification a
per specification &
per specification &
7249 Cyclic verticle load testing of piles in accordance with IS : 2911 (Part-IV) per test 16200.00
including prepration of pile head etc. for Single pile upto 50 tonne capacity
including prepration of pile head etc. forSingle pile above 50 tonne capacity
pile and upto 100 tonne capacity pile
including prepration of pile head etc. forGroup of two piles upto 50 tonne
capacity each
7252 Lateral load testing of single pile in accordance with IS : 2911 part -IV for per test 16200.00
determining safe allowable lateral load on pile. Upto 50 tonne capacity
7253 Lateral load testing of single pile in accordance with IS : 2911 part -IV for per test 26000.00
determining safe allowable lateral load on pile. Above 50 tonne capacity
7254 Hardening compound litre 48.00
7255 Road marking paint (spirit based) litre 150.00
7256 Superior quality road marking paint litre 230.00
7257 C.P. Brass bibcock 15 mm each 520.00
7258 C.P. Brass long nose bibcock 15 mm each 920.00
7259 C.P. Brass long body bibcock 15 mm each 705.00
7260 C.P. Brass stop cock (concealed) 15 mm each 1000.00
7261 C.P. Brass angle valve 15 mm each 470.00
7266 Pressed clay tiles 1,000 Nos 12500.00
7267 Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin bonded) each 140.00
(600x600x12 mm)


7268 Semi perforated ceiling tiles (600x600x12 mm) each 125.00
7269 25 mm thick particle board sqm 550.00
7270 30 mm thick prelaminated flush door shutter sqm 990.00
7271 IInd class teak wood lipping 25 mm wide x 12 mm thick metre 47.00
7272 25 mm thick melamine faced prelaminated three layer particle board sqm 940.00
7295 Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) 18 mm thick slab, upto sqm 1000.00
1500 cm2
7296 Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) 18 mm thick slab, sqm 1200.00
above 1500 upto 3600 cm2
7297 Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) 18 mm thick slab, sqm 1400.00
above 3600 cm2
7298 Granite South Red 18 mm thick slab, upto 1500 cm2 sqm 1500.00
7299 Granite South Red 18 mm thick slab, above 1500 upto 3600 cm2 sqm 2000.00
7300 Granite South Red 18 mm thick slab, above 3600 cm2 sqm 3000.00
7301 South Zed Black 18 mm thick slab, upto 1500 cm2 sqm 1200.00
7302 South Zed Black 18 mm thick slab, above 1500 upto 3600 cm2 sqm 2200.00
7303 South Zed Black 18 mm thick slab, above 3600 cm2 sqm 3000.00
7304 Good quality South Black 18 mm thick slab, upto 1500 cm2 sqm 900.00
7305 Good quality South Black 18 mm thick slab, above 1500 upto 3600 cm2 sqm 1800.00
7306 Aluminium T or L sections kilogram 250.00
7307 For flush door shutters Extra for providing teak veneering on one side instead sqm 600.00
of commercial veneering
7308 Good quality South Black 18 mm thick slab, above 3600 cm2 sqm 1950.00
7309 Paving Asphalt 60/70 penetration tonne 56600.00
7312 Expandable fastner with plastic sleeve and M.S. screws. 25 mm long each 12.00
7318 Plasticizer / super plasticizer kilogram 46.00
7319 Wall form panel 1250x500 mm each 830.00
7320 Tie bolt 12 mm dia 100 mm length each 46.00
7324 Spring coil 12 mm each 15.00
7325 Plastic cone 12 mm dia each 18.00
7326 Corner angle 45x45x5 mm 1.50 m long each 250.00
7327 100 mm channel shoulder 2.5 m long each 870.00
7328 Double clip ( bridge clip) each 87.00
7329 Single clip each 75.00
7330 M.S. tube 40 mm dia metre 220.00
7331 Wall form panel 1250x450 mm each 750.00
7332 Corner angle 45x45x5 m 2.50 m long each 350.00
7333 Column clamp 450x1070 m each 1200.00
7334 Prop 2 m ( 2-3.5m) each 870.00
7335 Binding wire kilogram 90.00
7338 Gun metal cramp kilogram 405.00
7339 Stainless steel cramp kilogram 420.00
7340 Stainless steel pin . kg 180.00
7342 Adjustable span ESO+SI (2.35-3.40) each 1970.00
7343 Adjustable telescopic prop 3 m (2.02-3.75 m) each 1155.00
7344 Beam clamp 300-380 mm (450-1070 mm) each set 470.00
7345 Prop 4 m each 1270.00
7346 Double coupler each 58.00
7347 Cadmium plated full threaded steel screws (30x4 mm dia.) 100 Nos 35.00
7348 Aluminium washer 2 mm thick 15 mm dia 100 Nos 12.00
7349 12 mm M.S. 'U' beading metre 14.00
7354 Plastic encapsuled M.S. foot rest 30x20x15 cm each 133.00
7358 Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, each 1100.00
accessories and flush pipe)
7359 P.V.C. automatic flushing cistern 5 lts capacity each 600.00
7361 P.V.C. automatic flushing cistern 10 lts capacity each 650.00
7363 15 mm C.P. brass tap with elbow operation lever each 870.00
7364 White glazed fire clay draining board 600x450x25 mm each 550.00
7366 Glass reinforced Gyp sum ( GRG) board 8.5 mm thick sqm 290.00


7367 Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 metre 85.00
mm
7369 Galvanised M.S. sheet 0.50 mm thick pressed stud. 48x34x36 mm metre 85.00
7375 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single each 500.00
lipped urinal
7376 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range each 1230.00
of two lipped urinals
of three lipped urinals
of four lipped urinals
7379 White vitreous china clay half stall urinal flat back 580x380x350 mm or angle each 1720.00
back 450x375x350 mm with waste fittings as per IS : 2556
7380 Precast R.C.C. grating with frame 500x450 mm horizontal grating each 820.00
7381 Precast R.C.C. grating with frame 450x100 mm vertical grating each 385.00
7382 Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887-1995 tonne 44000.00
7385 3 mm thick translucent white acrylic plastic sheet sqm 705.00
7386 12 thick particle board ceiling tile sqm 400.00
7388 Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt each 45.00
7389 Anodising 15 microns on aluminium sections kilogram 45.00
7390 Neoprin/EPDM rubber gasket metre 60.00
7391 Anodising 25 microns on aluminium sections kilogram 55.00
7392 Epoxy powder coating 50 microns on aluminium sections. kilogram 65.00
7393 Polyester powder coating 50 microns on aluminium sections kilogram 75.00
7394 Double action hydraulic floor spring with stainless steel cover plate each 1550.00
7395 6 mm dia. G.I. adjustable hangers including clips (upto 1.2 m length) each 35.00
7396 Double action hydraulic floor spring with brass cover plate each 2500.00
7397 Base jack each 255.00
7398 Challies each 990.00
7399 Cup lock each 105.00
7400 15 mm PTMT bib cock each 225.00
7401 15 mm PTMT bib cockwith flange (fancy) each 310.00
7402 15 mm PTMT bib cock long body with flange each 370.00
7403 15 mm dia PTMT stop cock (male thread) each 235.00
7405 20 mm dia. PTMT stop cock each 265.00
7406 PTMT pillar cock each 380.00
7407 PTMT push cock 15 mm dia. each 185.00
7408 PTMT push cock 12 mm dia. 20 mm BSP each 185.00
7409 PTMT grating 100 mm dia. each 82.00
7410 PTMT pillar cock (fancy) 15 mm foam flow. each 400.00
7411 125 mm grating withwaste hole each 80.00
7412 Rectangular type with openable circular lid 150 mm size 18 mm high with 100 each 130.00
mm dia. (110 gm)
7415 Double acting air valve 50 mm each 4270.00
7418 Water meter (including testing charges) 80 mm each 2500.00
7422 Dirt box srainer 80 mm each 3500.00
7426 Cat's eye each 650.00
7427 Water stops Serrated with central bulb (225 mm wide, 8-11 mm thick) metre 460.00
7428 Water stops Dumb bell with central bulb metre 439.00
7429 Kickers metre 440.00
7430 Wedge expansion hold fastner 1/4" or 6 mm each 15.00
7439 8mm thick (mirror polished tiles machine cut edge) Raj Nagar white sqm 610.00
7442 Wheel 75 mm dia. 40 mm wide each 72.00
7443 Aluminium single cleat of size 30x32x3 each 15.00
7444 Aluminium grip strip of size 50x12x2 each 12.00


7445 25 mm prelaminated flush door both side decorative sqm 870.00
7449 Aluminium U beading kilogram 270.00
7451 Glass sheet (Pin headed) 4 mm thick sqm 225.00
7452 Raj nagar I quality plain white marble (table rubbed and polished) 18 mm sqm 550.00
thick upto 1500 cm2
7453 Raj nagar plain I quality white marble (table rubbed and polished) 18 mm sqm 700.00
thick above 1500 and upto 3600 cm2
7454 Raj nagar plain I quality white marble (table rubbed and polished) 18 mm sqm 800.00
thick above 3600 cm2
7455 Makrana Adanga 15-18mm upto 1500 cm2 sqm 800.00
7456 Makrana Adanga 15-18mm above 1500 and upto 3600 cm2 sqm 900.00
7457 Makrana Adanga 15-18mm above 3600 cm2 sqm 1100.00
7458 Keseriaji/ Abu Ambaji (Green Marble)15-18mm upto 1500 cm2 sqm 650.00
7459 Keseriaji/ Abu Ambaji (Green Marble)15-18mm sqm 750.00
above 1500 and upto 3600 cm2
7460 Keseriaji/ Abu Ambaji (Green Marble) sqm 950.00
15-18mm above 3600 cm2
7461 Bhaislana,Abu,Kishangarh Zebra (Black Marble) sqm 550.00
5-18mm upto 1500 cm2
15-18mm above 1500 and upto 3600 cm2
15-18mm above 3600 cm2
7466 Second class deodar teak wood lipping 30 mm widthx12mm metre 40.00
7468 Veneered particle board with commercial veneering on both sides 12 mm sqm 700.00
thick
7477 Prelaminated particle board with one side decorative and other side balancing sqm 950.00
lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II
conforming to IS : 12823 (exterior grade)12 mm thick
7480 Prelaminated particle board with both sides decorative lamination, flat pressed sqm 950.00
3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823
(exterior grade)12 mm thick
7485 Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width) metre 41.00
7486 Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width) metre 46.00
7491 PTMT Waste Coupling 31/32MM Each 120.00
7492 PTMT Waste Coupling 38/40MM Each 165.00
7493 PTMT Bottle Trap 31/32MM Each 670.00
7494 PTMT Bottle Trap 38/40MM Each 700.00
7495 PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium Road & Each 350.00
H.D. Ball
H.D. Ball
H.D. Ball
H.D. Ball
H.D. Ball
7500 PTMT Angle Stop cock with Flenge 15mm Each 290.00
7501 PTMT Swiveling shower 15mm Each 250.00
7503 PTMT Liquid Soap Container of 400ml capacity Each 350.00
7504 PTMT Towel Ring 215xd200x37mm Each 240.00
7505 PTMT Towel Rail (450MM) Each 450.00
7506 PTMT Towel Rail (600MM) Each 540.00
7507 PTMT Shelf 450x124x36mm Each 610.00
7508 PTMT Urinal Spreader 15MM Each 270.00
7509 PTMT Soap Dish/Holder 138x102x75mm Each 240.00
7512 PTMT handle 125x34x24mm Each 47.00
7513 PTMT handle 150x34x24mm Each 51.00


7514 PTMT butt hinges 75x60x10mm Each 62.00
7515 PTMT butt hinges 100x75x10mm Each 82.00
7516 PTMT Tower bolt 152x42x18mm Each 105.00
7517 PTMT Tower bolt 202x42x18mm Each 125.00
7518 PTMT door catcher 72x42mm Each 41.00
7519 Synthetic Material(PTMT) of approved quality/make size 525 x90 x 75mm Each 230.00
7520 Synthetic Material(PTMT) of approved quality/make size 675 x90 x 75mm Each 260.00
7521 Synthetic Material (PTMT) Towel Ring of approved quality/make. Each 230.00
7552 Coir veneered board 4mm thick sqm 360.00
7557 2 sqm 200.00
Jalore (P-white / S-white/ Rosy Pink colour),Up to 1500 Cm Tiles
7558 2 2 sqm 400.00
Jalore (P-white / S-white/ Rosy Pink colour),1501 Cm to 3600 Cm Tiles
7559 2 sqm 600.00
Jalore (P-white / S-white/ Rosy Pink colour),Above 3601 Cm Slabs
7560 2 sqm 400.00
Rajasthan Black,Up to 1500 Cm Tiles
7561 2 2 sqm 600.00
Rajasthan Black,1501 Cm to 3600 Cm Tiles
7562 2 900.00
Rajasthan Black,Above 3601 Cm Slabs
7651 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100mm dia Metre 920.00
7654 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250mm dia Metre 2435.00
7666 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 100mm dia Each 38.00
7682 Ductile Iron K - 12 specials suitale for push on jointing upto 600mm dia Quintal 12500.00
7683 Ductile Iron K - 12 specials suitale for push on jointing over 600mm dia Quintal 18800.00
7684 Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 - upto Quintal 13150.00
600mm dia
7685 Ductile Iron Specials suitable for mechancial jointing as per I.S. 9523 over Quintal 19900.00
600mm dia
7686 Ductile Iron Pipe Class K-9 flanges and welding 100mm dia Metre 2650.00
7687 Ductile Iron Pipe Class K-9 flanges and welding 150 dia metre 3650.00
7690 Ductile Iron Pipe Class K-9 flanges and welding 300mm dia metre 8100.00


7697 S&S Centrifugally (Spun) C.I. Pipe class 75mm dia (300 cm long) Each 2770.00
7700 S&S Centrifugally (Spun) C.I. Pipe class LA 200mm dia Metre 1930.00
7703 S&S Centrifugally (Spun) C.I. Pipe class LA 350mm dia metre 4500.00
7708 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead Quintal 4950.00
jointing upto 300mm dia
7709 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead Quintal 5580.00
jointing over 300mm dia
7710 S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as Quintal 7500.00
per I.S. 13382 upto 300mm dia
7711 S&S Centrifugally (Spun) C.I. Pipe Specials suitabe for mechanical joint as Quintal 7800.00
per IS 13382 over 300mm dia
7712 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B Metre 1370.00
conforming to I.S. 1536, - 100mm dia
7718 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B metre 8100.00
7720 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B metre 14000.00
7722 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100mm dia Metre 850.00
7731 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600mm dia metre 8400.00
7736 Extruded burnt flyash clay sewer bricks conforming to I.S 4885 - 1988 1,000 Nos 5500.00
7737 Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894-1989 1,000 Nos 2800.00
7738 Calcium Silicate Bricks machine moulded confirming to I.S. 4139 - 1989 1,000 Nos 4850.00
7739 Modified Bitumen Refinary produced CRMB - 55 Tonne 56600.00
7741 Modified Bitumen Refinary produced CRMB - 60 tonne 56600.00
7742 Bitumen emulsion medium setting (M.S.) confirming to IS : 8887-1995 tonne 46200.00
7750 Toilet shelf W.V.C. Size 300mm Each 375.00
7751 Toilet shelf W.V.C. Size 500mm Each 450.00
7752 Toilet shelf Synthetic Material with tumbler size 470 x 114 x 36mm Each 380.00
7753 Toilet shelf Hard Plastic of superior quality size 590x140mm Each 450.00


7754 Toilet shelf Acrylic shelf on C.P. brass casted brackets & guard rail of Each 785.00
superior quality size 550x125mm
7755 Toilet Glass Shelf with edges rounded off Anodised Aluminium angle frame Each 290.00
& C.P. brass brackets & guard rail size 600x120mm
7756 C.P. brass Towel Rail elbow type with concealed screws size 450mm (Heavy Each 405.00
duty).
7757 C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy Each 465.00
duty).
7758 C.P. brass towel rail with brackets 450 x 20mm. Each 230.00
7759 C.P. brass towel rail with brackets 600 x 20mm. Each 240.00
7760 WVC (1stquality, ISI Marked) of approved make. Recessed towel Hanger size Each 69.00
108 x 108mm.
7761 C.P. Brass Towel Ring revolving type Each 175.00
7773 Colored interlocking C.C. paver Block Sqm 600.00
7774 Autoclaved Aerated Concrete (AAC) blocks Grade-I of density 551 to 650 Cum 3250.00
kg/cum
7799 Broken ceramic tiles Kg 8.00
7800 Ceramic Glazed Tiles Ist quality size 200 mm x 300 mm in white, gray, Sq.m. 350.00
ivory, fume red brown, light green, light blue and other light shades
7801 Ceramic Mat finished Tiles Ist quality size 300 mm x 300 mm in white, gray, Sq.m. 380.00
ivory, fume red brown, light green, light blue and other light shades
7802 Ceramic Glazed Tiles Ist quality 300 x 300 in all shades designs except White, Sq.m. 350.00
Ivory, Grey, Fuem Red Brown etc.
7803 Rectified Ceramic Glazed Tiles Ist quality 300x300mm or more in all shades Sq.m. 550.00
designs White, Ivory, Grey, Fuem Red Brown etc.
7804 Rectified Ceramic Glazed Tiles Ist quality 300x300mm or more in all shades Sq.m. 675.00
designs except White, Ivory, Grey, Fuem Red Brown etc.
7805 Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724mm X each 4700.00
578mm
7806 Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355mm each 2100.00
7807 Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345mm each 1900.00
7808 Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet each 435.00
7809 Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet each 470.00
7810 75 mm wide decorative border Rm 125.00
7811 Motive 200x200 mm Each 125.00
7812 Motive 200x300 mm Each 150.00
7813 Motive 300x300 mm Each 190.00
7814 Motive 300x450 mm Each 210.00
7815 Motive 300x600 mm Each 250.00
7825 Ceramic Glazed Vitrified Tiles Size : 600mm x 1200mm Sqm 1025.00
7828 Ist Qulality MAT and glossy finished ceramic tiles Size : 250mm x 375mm Sqm 320.00
7832 Ist quality heavy duty Vitrified polished digital tile size:298mmX 298mm Sqm 460.00
7833 Ist quality heavy duty Vitrified polished digital tile size:300mmX450 mm Sqm 475.00
7834 Ist quality heavy duty Vitrified polished digital tile size:600mmX600 mm Sqm 700.00
7835 Ist quality MAT & GLOSSY finished ceramic tile 600mm x 600mm Sqm 750.00
7850 Agaria White marble slab plain 18mm thick sqm 1325.00
7857 P.T.M.T. Grating square slit 150mm each 150.00
7858 P.T.M.T. Urinal cock 15mm dia each 155.00
7859 P.T.M.T. Bib cock with nozzle 15mm each 200.00
7861 P.T.M.T. Stop cock (concealed) 15mm each 275.00
7862 15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. each 67.00
Nuts
7863 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. each 84.00
Nuts
7864 P.T.M.T. extension nipple 15mm each 42.00
7896 Vitrified tile Sqm 350.00
7900 Modular bricks of class designation 100 1,000 Nos 5200.00
7901 Machine moulded perforated FPS bricks of class designation 125 1,000 Nos 5200.00


7902 Machine moulded modular perforated bricks of class designation 125 1,000 Nos 5200.00
7903 Machine moulded FPS bricks of class designation 125 1,000 Nos 5200.00
7904 Machine moulded tile bricks of class designation 125 1,000 Nos 5000.00
8001 24 mm thick Factory made shutters with frame, rails and panels of PVC sqm 1500.00
extruded sections in white, grey or wooden finish
8002 30 mm thick Factory made shutters with frame, rails and panels of PVC sqm 1560.00
extruded sections in white, grey or wooden finish
8003 Factory made PVC rigid foam panelled shutter sqm 1865.00
8004 Factory made PVC rigid foam panelled shutter as per IS : 4020 sqm 2000.00
8006 Factory made PVC rigid foam sheet 1mm thick sqm 185.00
8007 Factory made PVC rigid foam sheet 5mm thick sqm 770.00
8008 Factory made prelaminated PVC rigid foam sheet 5mm thick sqm 925.00
8010 48mmX40mmX1.5mm thick Factory made door frame of PVC extruded metre 190.00
sections in white, grey or wooden finish
8011 Factory made door frame PVC extruded sheet i/c carriage metre 230.00
8012 Adhesive solvent cement kg 130.00
8100 Powder coated M.S. butt hinges 100mm X58mmX1.9mm 10 Nos 95.00
8200 A.P.P. modified polymeric felt (two layers) 1.5 mm thick sqm 110.00
8201 A.P.P. modified polymeric felt (two layers) 2 mm thick sqm 150.00
8203 A.P.P. modified 2 mm thick membrance reinforced with glass fibre matt sqm 250.00
8204 A.P.P. modified 3 mm thick membrance reinforced with glass fibre matt sqm 175.00
8205 A.P.P. modified 3 mm thick membrance reinforced with polyster matt sqm 225.00
8206 Bitumen primer for bitumen membrance litre 110.00
8207 Geotextile 120 gsm membrance sqm 40.00
8210 Stainless steel screws 50 mm 100 Nos 305.00
8215 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked 10 Nos 315.00
8219 Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS : 12817 marked 10 Nos 485.00
8222 M.S. heavy weight but hinges 125x90x4.0mm IS : 1341 marked. 10 10 Nos 330.00
8223 M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked 10 10 Nos. 170.00
8224 M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked 10 10 Nos 98.00
8225 M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked 10 10 Nos 81.00
8300 1216 mm PE-AL-PE Composit pressure pipe Metre 90.00
8501 Polymer modified cementation coating kilogram 290.00
8502 Fibre glass cloth sqm 50.00
8504 Multi surface paint litre 460.00
8505 Acrylic exterior paint litre 450.00
8506 Premium Acrylic exterior paint litre 250.00
8507 Textured exterior paint litre 350.00
8508 Primer for cement paint litre 158.00
8509 Special Primer litre 190.00
8510 Metal Primer litre 130.00
8520 Edge blocks 60 mx2 cum 110.00
8521 inter–locking block , M-30, 60 mm thick ,Category A Denated units to key sqm 578.00
into each other on four faces zigzag shape as per IRC SP 63:2004
8522 inter–locking block , M-30, 60 mm thick,Category „B‟ Denated only two side sqm 551.00
like I,Z,T shape etc. as per IRC SP 63:2004
8523 inter–locking block , M-30, 60 mm thick ,Category „C‟not denated on any its sqm 525.00
faces like Hexagon, Rectangular, square shape as per IRC SP 63:2004


8525 inter–locking block , M-35, 60 mm thick ,Category B Denated units to key sqm 683.00
8526 inter–locking block , M-35, 60 mm thick ,Category C Denated units to key sqm 609.00
8536 25 mm thick Non slippery reflective type designer paving tile ,M 40 grade sqm 788.00
8537 25 mm thick Non slippery reflective type designer paving tile ,M 30 grade sqm 683.00
8561 Extruded polystyene rigid insulation board 50mm thick sqm 570.00
8589 Calcium Silicate tegular edged celling tiles Sqm 901.00

8590 Galvanised Steel main Tee ceiling section Size Each 140.00
8591 Galvanised Steel perimeter wall Angle Size 24 x Each 140.00
8592 Galvanised Steel intermediate cross T section each 140.00
8593 Galvanised Steel intermediate cross T section each 140.00
8595 Wooden screws with plastic rawl plugs 35mm x8mm each 140.00
8596 Galvanised iron 8mm Outer Diameter M-6 dash fastener 50 mm long each 44.00
8611 Main T ceiling sections 24x38x0.3 mm (3 metre long) each 230.00
8612 Perimeter wall angle 21x21x0.3mm (3 metre long) each 145.00
8613 Intermediate cross T-section 24x25x0.3mm (1.2 mtrs long) each 87.00
8615 Hanger rod 0.5 mm thick each 12.00
8616 Adjustment clip each 6.00
8617 Soffit cleat each 3.00
8618 Dash fastener 6 mm dia 50 mm long each 12.00
8619 alvanised iron L-Shape level Adjuster each 17.00
8620 Vitrified floor tile 50x50 cm sqm 463.00
8625 Poly propylene- Random - Co - Polymer (PPR) pipes SDR 7.4 - 16 Outer dia metre 52.00
8626 Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 20mm Outer metre 69.00
dia.
dia.
dia.
dia.
dia.
dia.
dia.


dia.
8634 Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11 - 110mm metre 1345.00
Outer dia.
8635 Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11- 160mm metre 2835.00
Outer dia.
8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia. metre 73.00
8642 Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5mm inner dia. metre 1140.00
8643 Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia. metre 1500.00
8646 Silicon sealant. cartridge 360.00
8647 Stainless steel screws 30mmx4mm cent 550.00
8649 Stainless steel (SS 304 grade) adjustable friction window stay. 205 x 19mm each 185.00
8650 Stainless steel (SS 304 grade) adjustable friction window stay 255 x 19mm each 205.00
8654 Masking tape. metre 9.00
8655 Autoclaved aerated cement (AAC) blocks. cum 2550.00
8656 Gypsum panel 666 X 500 X 100 mm size. sqm 810.00
8657 Bonding Plaster for Gypsum Panel kg 92.00
8658 Mechanised Autoclaved flyash lime bricks 100 1000 Nos. 5200.00
8659 Water proof ply 12mm thick. Sqm. 1650.00
8660 Aluminium casement window fastner (Anodised AC 15 ) each 90.00
8661 Aluminium casement window fastner (powder coated ). each 105.00
8662 Aluminium casement window fastner (polyester powder coated). each 115.00
8663 Aluminium round shape handle (anodised AC 15) each 140.00
8664 Aluminium round shape handle (powder coated) each 165.00
8665 Aluminium round shape handle (polyester powder coated). each 195.00
8666 Stainless steel screws 25mm x4mm cent 145.00
8667 UV stabilised 2 mm thick plain FRP sheet . sqm 745.00
8669 Manglore ridge tiles .........x.......mm 20mm thick. each 41.00
8670 Manglore tiles .........x.......mm 20mm thick. each 23.00
8671 Precoated galvanised iron profile sheet 0.50 mm TCT sqm 440.00
8672 Precoated galvanised steel plain ridges. metre 440.00
8673 Precoated galvanised steel flashings/aprons. metre 440.00
8674 Precoated galvanised steel gutter metre 480.00
8675 Precoated galvanised steel north light curves. metre 480.00
8676 Precoated galvanised steel barge board. metre 440.00
8677 Precoated galvanised steel crimp curve sqm 560.00
8678 1mm thick 35mm wide bright finished stainless steel piano hinges . metre 110.00
8683 Red sand stone gang saw cut 30mm thick. sqm 460.00
8684 White sand stone gang saw cut 30mm thick. sqm 750.00
8685 Delinator each 800.00
8686 Precast C.C. Kerb stone M - 25 cum 4800.00
8687 Thermoplastic paint kg 100.00
8688 Glass beads kg 120.00
8689 Interlocking C.C. paver block ( 60 mm thick, M-30 ) sqm 578.00
8690 High intensity retro - reflective sheet. sqm 1950.00
8691 Punched tape concertina coil 600 m dia. 10m openable length (Total length bundle 1050.00
90m)
8692 RBT reinforced barbed wire. metre 20.00
8693 Turn buckle and strengthening bolt. each set 50.00
8694 Precast pavement slab 450 x 450 x 50mm (M - 30). each 60.00
8695 Chain link fabric fancing mesh of size 50x50mm made of G.I. wire of dia. sqm 210.00
3.15mm.


3.15mm.
3.15mm.
8698 Stainless steel cramps with nuts, bolts and washer for dry stone cladding . each 280.00
8699 8 mm thick tapered edge calcium silicate board . sqm 350.00
8700 10 mm thick calcium silicate board. sqm 430.00
3.15mm.
8703 Telescopic drawer channels 300mm long . set 450.00
8704 Stainless steel roller for sliding arrangment in racks/ cupboards/ cabinets each 29.00
shutter .
8705 50mmX42mmX2mm thick Factory made door frame of PVC extruded metre 210.00
sections in white, grey or wooden finish
8706 25mm thick factory made PVC flash foor shutter i/c carriage. sqm 2800.00
8707 Factory made glass reinforced plastic door frame 90x45 mm i/c carriage. metre 450.00
8708 30 mm thick factory madeglass fiber reinforced plastic panel door shutter i/c sqm 3200.00
carriage.
8710 Factory made solid PVC door frame 60 x 30mm i/c carriage. metre 600.00
8711 28mm factory made solid PVC panel door shutteri/c carriage. sqm 3200.00
8713 Fiber glass reinforced plastic chajja. sqm 4900.00
8714 Magenatic catcher triple strip verticle type. each 105.00
8715 Magenatic catcher double strip horizontal type. each 90.00
8716 Mortice lock of approved make Godrej or equivalent with pair of CP handles each 2850.00
8717 12.5 mm thick Glass fibre reinforced Gypsum board . sqm 450.00
8718 Almirah lock of approved make Godrej or equivalent each 400.00
8719 2nd class teak wood lipping/ moulded beadibg or Taj beading of size metre 50.00
18X5mm
8720 Ceiling sections 0.55 mm thick having a knurled web of 51.55mm and two metre 85.00
flanges of 26mm each with lips of 10.55mm.
8721 Perimeter channel having one flange of 20mm and another flange of 30mm metre 90.00
with thickness of 0.55mm and web of length 27mm.
8722 Nylon sleeves & wooden screws (40mm) each 3.00
8723 Counter sunk ribbed head screw 25mm. cent 105.00
8724 12mm thick marine plywood conforming to IS:710 sqm 1500.00
8725 12mm thick fire retardant plywood conforming to IS: 5509. sqm 1280.00
8726 1.5mm thick decorative laminated sheet sqm 800.00
8727 1.0mm thick decorative laminated sheet sqm 650.00
8730 30 mm thick factory made glass fiber reinforced plastic flush door shutter sqm 2700.00
8731 High polymer modified quickset tile adhesive. per kg 50.00
8732 synthetic Fiber 6mm / 12mm per pack 45.00
of 125 gm
8733 Welded mesh 50x50x2.1 mm sqm 205.00
8736 Expended metal size 20 - 25 mm size 18swg sqm 235.00
8737 Steel pipe 80x40 16 gauge Qtl 8750.00
8738 Steel pipe 50x25 18 gauge Qtl 8850.00
8740 Acoustical fine fissured tiles/ Mineral fibre high density tiles Sqm 850.00
8741 Glass Fibre Reinforced Gypsum False ceiling tiles Sqm 1150.00
8742 Earthen pots Each 12.00
8743 Disc for floater Each 6930.00
8744 Trowel blades Each 6930.00
8745 Filter mats Each 14000.00
8746 Top mat Each 41600.00
8747 Concrete Cutter diamond saw Each 5300.00
8748 Designer polished CC tiles Sqm 650.00
8749 8mm thick laminated floor Sqm 1850.00
8750 89 mm wide having both side laminations Rm 700.00
8751 transaction/adaptation profile Rm 550.00
8752 Alumium grill (size 7.5mm x 6.0mm and opening of size 102mm x 99mm) Sqm 1100.00
8753 Y & H section Rm 90.00
8754 Anodising 15 microns on aluminium sections for grill Sqm 700.00


8755 Powder coating aluminum for grill Sqm 850.00
8756 Polyester Powder coating for grill Sqm 950.00
8757 SS wire gauge Sqm 550.00
8758 Vertical blinds Sqm 1400.00
8759 Horizontal blinds /Venation blind Sqm 1500.00
8760 Drapery rod (20 gauge, 25.4 mm diameter) Rm 250.00
8761 Sun control film sqm 650.00
8762 Polysulphide Kg 650.00
8763 Primer Lt 1300.00
8764 Backup rod Rm 60.00
8765 Masking tape, thiner Rm 60.00
8766 Door frame RCC Size 75x50 mm Rm 70.00
8767 Door frame RCC Size 75 x 75mm Rm 85.00
8770 Stone Door frame single paitam Size 75 x 60mm Rm 87.00
8773 Stone Door frame single paitam Size 100x 75mm Rm 160.00
8775 Stone Door frame Double paitam Size 100x 75mm Rm 150.00
8776 Stone Door frame Double paitam Size 125 x 100mm Rm 200.00
8777 PVC sheet 1 mm sqm 420.00
8778 PVC sheet 1.5 mm sqm 500.00
8779 PVC sheet 2 mm sqm 560.00
8780 Melamine polish Lt 450.00
8781 Melamine polish Lt 350.00
8782 PW 6250 (PANEL) Sqm 555.00
8783 PW 928 (PERIMETER SECTION) Rm 46.00
8784 M.S. PIPE(20x20MM)WITH PRIMER COATING Rm 48.00
8785 PW 10150 (PANEL) Sqm 785.00
8786 PW 1228 (PERIMETER SECTION) Rm 68.00
8800 Imidacloprid 30.5% EC Ltr. 3850.00
8801 Termitubes Rmt. 11.00
8802 Junction Box for antitermite work Each 660.00
8803 Autoclave aerated blocks of Conforming to Grade-I cum 3080.00
8804 polymer modified adhesive mortar Kg. 15.00
8805 Hand Grinder for groove cutting metre 330.00
8806 Heavy Duty Vitrified Polished Digital tiles 60x60 cm sqm 745.00
8807 Heavy Duty Vitrified Polished Digital tiles 60x120 cm sqm 1220.00
8808 Heavy Duty Vitrified glazed MAT tiles 60x60 cm sqm 1016.00
8809 Heavy Duty Vitrified glazed MAT tiles 60x120 cm sqm 1422.00
8810 Heavy Duty Vitrified Double Charged tiles 60x60 cm sqm 813.00
8813 19mm thick BWP block board sqm 968.00
8814 Front side finishing with 4mm thick teak veneer sqm 860.00
8815 Outer Bidding 35mm x 12mm Rmt. 70.00
8816 Brass Lock each 200.00
8817 4.0mm thick veneer sqm 1100.00
8818 6.00mm thick veneer sqm 1350.00
8819 S.S. Rod pipe 30mm Rmt. 300.00
8820 S.S. Rod pipe 30mm (Bracket) Each 100.00
8821 Stainless steel (Grade-304)hollow section round/square tubes Kg. 275.00
8821(a) Stainless steel (Grade-204)hollow section round/square tubes Kg 200.00
8822 Stainless steel bolts/square bar and plates Kg. 130.00
8823 GI metal Tile Lay-in Plain Tegular edge global white color tiles of size Sqm 825.00
595x595mm and 0.5mm thick
8824 Main T Ceiling sections 24x38x0.3mm (3 metre long) Each 205.00
8825 Perimeter wall angle 24x24x0.3mm(3 metre long) Each 130.00
8826 Intermediate cross T-ection 24x25x0.3mm (1.2 m long) Each 80.00
on grid for cut outs
8827 Intermediate cross T-Section 24x25x0.3 mm (0.6 m long) Each 37.00
on grid for cut outs
8828 Hanger rod 4mm thick Each 8.00


8829 Adjustment clip 85x30x0.8mm Each 7.00
8830 Soffit cleat (Size 27x37x25x1.60mm) Each 3.00
8831 Dash Hold fastener 12.5 mm dia 50 mm long Each 42.00
8832 GI metal Tile Lay-in Perforated Tegular edge global white color tiles of size sqm 935.00
595x595mm and 0.5mm thick
8833 Mineral Fibre Anti Bacterial Suspended beveled tegular edge ceiling tiles Sqm 945.00
8834 G.I. Main Runner 15mm x 32mm 3000 mm Length 0.33 mm thick Each 195.00
8835 G.I. Cross Tee 15mm x 32mm 1200 mm Length 0.33 mm thick Each 81.00
8836 G.I. Cross Tee 15mm x 32mm 600 mm Length 0.33 mm thick Each 41.00
8837 Mineral Fibre Acoustical Suspended beveled tegular edge ceiling tiles Sqm 865.00
8838 Primer (10 Sqm. P.Ltr in to Coats) Ltr. 140.00
8839 for putty Choke Mitty kg 15.00
8840 Linseed oil Ltr. 250.00
8841 Varnish Ltr. 255.00
8842 Enamel Paint Kg 270.00
8843 Valvet touch paint (5 Sqm. P.Ltr. For three coat) Ltr. 500.00
8844 Primer (20 Sqm. In 1 Ltr. for one coat) Ltr. 150.00
8845 Primer Ltr. 270.00
8846 Duco Putty kg 190.00
8847 Thinner Ltr. 160.00
8848 Duco Paint Ltr. 500.00
8849 Hire Charges of Spray Machine Day 500.00
8850 Core cutting machine day 15000.00
8851 Nano Technology 5mm Crack Filling High Strength Chemical Liters 400.00
8852 Nano Technology Highly Hydrophobic Deep Penetrating Primer Liters 480.00
8853 Fiber Mess Net Pasting on Roof sqm. 32.00
8854 Nano Technology Oiliphobic Water Proof, Water Based, Breathable Coat Liters 600.00
8855 Aerogel Green Based Thermal Insulation 1000 Micron Coating With Sri Liters 700.00
Value 102 or More
8856 Nano Technology Anti Static + Anti Stain+ Anti Skid+High Gloss Top Coat Liters 300.00
8858 Nano Technology Degreasing Stone Cleaner, Non Acidec, Non Alcaline, Non Liters 350.00
Harmful For Cleaning of Stones, Without Damaging Stones
8859 Nano Technology Deep Penetrating Primer Deep Penetrating 2-3 MM Inside. Liters 350.00
8860 Silicon Dioxide formulated with nano technology sol gel process, water based, Liters 1200.00
UV Protection & Breathable Product- Giving Effects of water proof stone,
Breathable, with no change in Stoe color, Absolutely Natural & Food Safe, No
Coating visible on stone, only impregnation Material, Upto 5 mm Penetrating
power
8861 Anti Stain Treatment with nano technology with Transparent matt or high Liters 700.00
shine protective coat formulated with pure silica, Flexible in Nature for
Sealing stone Joints and Making Stones anti stain, Anti Slippery with
Absolutely Natural Appearance, Avoides Stone Loosing and Giving Firm Grip
to Stone Facades
8862 Dow coarning 789 Weather proofing silicon cartage 270.00
8863 Silicon Structural adhesive Mtr. 450.00
8864 Toughened Glass 6mm thick Sqm 1800.00
8865 sundries Backup Rod, Masking tape, spacer tape etc. L.S. 1.25
8866 Polycrete wall 125x125 (main member pillar) Mtr. 710.00
8867 Polycrete wall 20x305 (Horizontal panel) Mtr. 380.00
8868 Alumium grill section of size 7.5mm x 6.0mm and opening of size Sqm 715.00
75mmx72mm
8869 Alumium grill section of size 7.5mm x 6.0mm and opening of size Sqm 1050.00
50mmx48mm
8870 Solution Required for Dry Cleaning of sofa sets Ltr. 900.00
8871 Vacume Cleaner Shampoing/Drycleaning Machine Hr. 20.00
8872 Tapestry cloth of Sofa set Mtr. 350.00
8873 100mm thick Joint less P.U. foam sqm 1400.00
8876 Cost of jata / Dori L.S 1.25
8877 Cost of Sofa Wooden Leg Each 83.00
8878 Synthetic Carpet Carpet including 5% Wastage P.Sqm. 350.00
8879 Chiken wire mesh P.Sqm. 40.00


8880 Premium Quality white glazed vitreous china W.C. orissa pan (IS:2556 Mark) Each 2050.00
Size 580x440 mm.
8881 Premium Quality white glazed vitreous china Universal (anglo-Indian type) Each 4990.00
WC Pan
8882 Premium Quality WVC Wall Hunged WC Pan Each 11850.00
8883 Double Syphonic European W.C. with mounted W.V.C. flushing cisternand Each 16500.00
seat cover (complete set)
8884 premium qulaity WVC Urinal Flat Back (small) size 440x265x315 mm. Each 2100.00
8885 premium qulaity WVC Urinal Flat Back (large) or half stall size Each 7800.00
590x375x390 mm.
8886 premium qulaity W.V.C. Urinal Partition plate of size 630x315 mm Each 2350.00
8887 premium qulaity WVC Wash basin Size 550 mm x 400 mm Each 1750.00
8888 premium qulaity WVC Wash basin with C.I. brackets Each 100.00
8889 premium qulaity WVC Wash basin Size 550 mm x 400 mm dia for counter Each 3040.00
top.
8890 Premium quality water closet Seat Cover Solid PVC (ISI marked) grade-I Each 830.00
White for EWC.
8891 Premium quality Low level Flushing Cistern of 10 litres capacity PVC with Each 1890.00
PVC bend as per IS : 7231
8892 Ornamental frame size 50x12 with 6mm Ply Board on Back Side (3'+2')x2 78.00
8893 looking Mirror 5mm thick (3'x2') 120.00
8894 Water Proof Ply (3'x2') 40.00
8895 Hydraulic Seat Cover for Europeon WC each 3850.00
8896 chair for wall hung W.C. each 1400.00
8897 Fixing Concealed cistern with Floor mounting frame and flush plate each 6500.00
8898 New spindle for Bib cock/pillar cock each 80.00
8899 Toilet corner Glass Shelf size 225x225mm with C.P. brass brackets each 1350.00
8900 premium quality waste coupling 32mm half thread Each 1275.00
8901 Premium quality Bottle trap internal portion 32mm, size 250mm long Each 1775.00
8902 Premium Towel rack 600mm long 260mm wide with lower hangers Each 4000.00
8903 Premium quality Angular stop cock with wall flange Each 1210.00
8904 Premium quality Two way Bib cock with wall flange Each 2100.00
8905 PVC Tank Cover 300 Lt. capacity Each 170.00
8906 PVC Tank Cover 500 Lt. capacity Each 180.00
8907 PVC Tank Cover Above 500 Lt. capacity Each 225.00
8908 C.I. Saddle pieces 100mm dia Each 195.00
8909 Sluice valve 100mm dia Each 4950.00
8910 DI Pipe (Ductile iron pipe) of 100 mm dia Meter 850.00
9000 Mechanised Autoclaved flyash lime bricks 75 1,000 Nos 4500.00
9001 uPVC Casement Window Frame 60x60mm with EPDM & 1.2mm thk G.I Meter 420.00
Reinforcement (BR60DA)
9004 uPVC Casement Window Fix Mullion 76x60mm with EPDM & 1.2mm thk Meter 499.00
G.I Reinforcement (SE76NDA)
9005 uPVC Single Glazing Bead 34x20 with EPDM (GB34DA) Meter 63.00
9022 Multipoint Transmission Gear (ESPAG) with white finish powder coated Per. Pc. 635.00
handle
9023 5mm Thick Float Glass (ISI make) Sq. Mtr. 509.00
9050 Labour & Manufacturing Charges (Cutting, Drilling, Welding, Trimming, Sq. Mtr. 572.00
Cleaning, Glass & Hardware Fixing & Packing)
9051 uPVC Window & Door Site Installation Labour (Unloading, assembling & Sq. Mtr. 347.00
fixing, silicon applicaton & cleaning)
9052 Bectokill chemical Ltr 1549.00
9053 UV tube Each 7980.00
9054 6 mm thick tapered edge calcium silicate board/tile sqm 300.00
9055 6 mm thick calcium silicate perforated tile/board sqm 450.00
9056 8 mm thick calcium silicate perforated tile/board sqm 575.00
9100 C.P. Brass flush Valve Economy model 25 mm. each 1750.00
9101 C.P. Brass flush Valve Economy model 32 mm. each 3600.00
9102 C.P. Pillar Cock 15 mm nominal size each 870.00
9103 Vitreous china flat back wash basin Size 510 mm x 440 mm each 997.00
9106 Vitreous china flat back wash basin Size 400 mm x 400 mm corner each 901.00
9107 Vitreous china counter top wash basin Size 410 dia each 1588.00


9108 Vitreous china counter top wash basin Size 550 mm x 400 mm dia each 1588.00
9109 Vitreous china counter top wash basin Size 630 mm x 500 mm dia each 1690.00
9110 terrazzo (Mosaic) wash hand basin size 450 mm x 280 mm. each 370.00
9111 terrazzo (Mosaic) wash hand basin size 550 mm x 400 mm. each 420.00
9112 Bottle Trap C.P. Brass 32 mm each 750.00
9113 Bottle Trap C.P. Brass 40 mm each 860.00
9114 Bottle Trap Synthetic Material (PTMT) 32 mm. each 500.00
9115 Bottle Trap Synthetic Material (PTMT) 40 mm. each 600.00
9116 Bottle Trap PVC each 260.00
9117 Grating Stainless Steel Sheet size 125mm dia. each 70.00
9118 Grating Stainless Steel Sheet size 125mm dia. Heavy Quality each 90.00
9119 Grating Synthetic Material(PTMT) of approved quality/make size 125mm each 110.00
dia
9120 Grating Synthetic Material(PTMT) of approved quality/make size 150mm each 120.00
dia
9121 Grating Square 150 x 150 x 8mm. (Anti Cockroach) each 400.00
9122 Grating C.P. brass with frame (Heavy) & superior quality size 125mm dia. each 300.00
9123 Grating C.P. brass with frame Light & superior quality size 125mm dia each 90.00
9124 Grating Cast Iron. each 200.00
9125 Liquid Soap Container C.P. brass each 550.00
9126 Liquid Soap Container Synthetic Material each 350.00
9127 Tooth Paste & Brush Holder C.P. brass each 350.00
9128 Tooth Paste & Brush Holder C.P. brass (Heavy and Superior quality.) each 500.00
9129 Tooth Paste & Brush Holder Stainless Steel each 400.00
9130 Toilet Paper Holder with rod C.P. brass each 400.00
9131 Toilet Paper Holder with rod C.P. brass heavy & Superior quality. each 850.00
9132 Toilet Paper Holder with rod WVC (1stquality, ISI Marked) recessed size each 250.00
150x150mm.
9133 Toilet Paper Holder with rod WVC (1stquality, ISI Marked) size 150x150mm each 220.00
.Exposed
9134 Soap Dish or Tray C.P. brass each 315.00
9135 Soap Dish or Tray C.P. brass heavy and superior quality. each 205.00
9136 Soap Dish or Tray WVC (1st Quality, ISI Marked) recessed size 150 x 150 each 230.00
mm.
9137 Soap Dish or Tray WVC (1st Quality, ISI Marked) recessed size 200 each 450.00
x100mm.
9138 Soap Tray WVC (1st Quality, ISI Marked) size 200 x100mm. each 390.00
9139 Soap Dish WVC (1st Quality, ISI Marked) size 380mm. each 450.00
9140 Twin- peg C.P. brass each 89.00
9141 Twin- peg C.P. brass (heavy)Superior quality each 190.00
9142 Twin- peg Acrylic each 90.00
9151 Shower arm 15mm dia C.P.brass heavy & superior quality 150mm each 230.00
Projection.
Projection.
Projection.
Projection.
9155 Bath Shower C.P. brass fixed. each 163.00
9156 Bath Shower C.P. brass of Heavy & superior quality 150mm. each 450.00
9157 Bath Shower C.P. brass of Heavy & superior quality, revolving with each 520.00
adjustable key 150mm.
9158 Extension Pipe for bib cock C.P. brass of Heavy & Superior quality 50x15mm each 125.00
9159 Extension Pipe for bib cock C.P. brass of Heavy & Superior quality each 140.00
100x15mm
9160 Extension Pipe for bib cock C.P. brass of Heavy & Superior quality each 230.00
150x15mm


9161 Acrylic Toilet accessories set consisting of Towel rail, shelf, towel ring, soap each 2200.00
dish, paste & brush holder & twin peg
9162 Jet spray for water closet with C.P. Copper Tube flange each 670.00
9163 C.P.flange for 15mm dia taps. each 30.00
9164 C.P. Health Faucet with 1Mtr. Long Tube & Hook each 900.00
9165 C.P. brass Urinal Spreader for Large Urinal of heavy duty each 930.00
9166 P.V.C. Cistern fittings (Syphon, Ball cock & Handle Set) Set 450.00
9996 Carriage & sundries L.S. 1.25
9997 Water charge 1.00%
9998 Contractor profit & overhead 10.00%
9999 Sundries L.S. 1.25

CHAPTER : G-4.1 : CARRIAGE OF MATERIALS

NOTE
1 Rates are for net quantities after deduction of voids
2 Part of Km beyond 1 Km. will be treated as under :
1.499 = 1.00 Km. ; 1.500 Km. = 2.00 Km
3 The rates are inclusive of loading and unloading
4 The rates are inclusive of stacking. If stacking is not required, no deduction is to be done.
Rates
Add for Add for Add for

Add for Add for
Ch Code For 500 each 1 Km each 1 Km each 1 Km
Description Unit Up to each 50 For 1 For 5 For 10 For 20 each 1 Km
No. M (0.5 beyond Ist beyond 5 beyond 10
50 M M (upto Km. Km. Km. Km. beyond 20
Km.) Km (upto 5 Km (upto Km (upto
500 M) Km
Km.) 10 Km.) 20 Km.)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Earth, Sand, Lime, Morrum manure
4.1 Cum 23.00 4.00 59.00 80.00 9.00 125.00 8.00 165.00 8.00 240.00 7.00
or sludge
Building Rubbish Stone metal (Grit
4.2 Cum 30.00 5.00 72.00 80.00 9.00 125.00 8.00 165.00 8.00 240.00 7.00
and ballast etc.)
4.3 Stone for Masonry work & soling Cum 44.00 5.00 90.00 105.00 7.00 132.00 7.00 164.00 6.00 221.00 5.00
4.4 Excavated rock Cum 44.00 5.00 90.00 105.00 7.00 132.00 7.00 164.00 6.00 221.00 5.00
4.5 Bricks 1000 Nos 89.00 12.00 193.00 227.00 14.00 282.00 13.00 345.00 12.00 460.00 8.00
4.6 Brick Tiles 1000 Nos 36.00 7.00 98.00 115.00 13.00 167.00 13.00 230.00 12.00 345.00 7.00
Cement, Stone blocks pipes and
4.7 MT 25.00 4.00 56.00 66.00 8.00 98.00 8.00 138.00 7.00 207.00 4.00
other heavy materials
Steel, Tar bitumen , Timber and
4.8 MT 23.00 3.00 50.00 59.00 13.00 110.00 13.00 173.00 12.00 288.00 5.00
steam coal
4.9 Empty bitumen drums 10 Nos 38.00 3.00 65.00 77.00 5.00 95.00 4.00 115.00 4.00 150.00 2.00
4.10 Carriage with care Precast cement concrete blocks like Dand & kerbs etc weighing
4.10.1 Upto 50 Kg. Each -- -- 3.95 4.60 0.40 6.00 0.40 8.00 0.35 11.00 0.35
4.10.2 51 to 70 Kg. Each -- -- 6.60 7.60 0.40 9.00 0.45 11.00 0.35 15.00 0.35
4.10.3 71 to 100 Kg. Each -- -- 8.00 9.00 0.50 11.00 0.50 14.00 0.35 17.00 0.35
4.11 R.C.C. Hume Pipe with collar
4.11.1 Dia 300 mm Mtr. -- -- 24.00 28.00 0.70 31.00 0.60 33.00 0.35 37.00 0.35
4.11.2 Dia 600 mm Mtr. -- -- 61.00 72.00 2.00 80.00 1.80 88.00 1.40 102.00 0.95
4.11.3 Dia 900 mm Mtr. -- -- 127.00 154.00 550.00 176.00 4.80 198.00 3.50 231.00 3.00
4.11.4 Dia 1200mm Mtr. -- -- 193.00 231.00 550.00 253.00 4.80 275.00 3.50 308.00 3.00
G-4-1 [37]
CHAPTER : G-4.2
Loading & Unloading
Chapter
Description Unit Rate (Rs.)
Code No
1 2 3 4
4.12 Loading in or unloading cement of the Railway wagons at M.T. 35.00

siding and carrying the same from or into godowns adjacent to
the siding, including stacking the same properly in rows upto
any height as per direction of Engineer-in Charge, sweeping
the wagons and screening the swept cement and filling in bags
complete.
4.13 Loading in or unloading from the Railway wagons and

stacking as per the direction of Engineer-in-Charge
4.13.1 Steel M.T 44.00
4.13.2 G.I., C.I. R.C.C. or C.C. pipes upto 500mm dia and similar M.T 35.00
heavy materials.
4.13.3 Full bitumen drums Each 12.00
4.13.4 Heavy materials where each piece or bundle, crate or case M.T 45.00
weight more than one tonne and R.C.C. C.I. and concrete pipes
above 500 mm dia
Note :- The rates will be applicable in all cases whether material are
unloaded on or loaded from railway siding or directly
unloaded on or loaded from transport
No deduction shall be made from carriage rates for such direct
unloading or loading
4.14 Extra for sorting the steel size-wise inside the store yard and M.T 24.00
stacking the same for measurement within the lead of 100
meters as directed by the Engineer-in-charge
G-4-2 [38]
CHAPTER G-5
HIRE CHARGES OF TENT ARTICLES
NOTE : Hire charges includes transporatation at
site within Muncipal Limits, Loading,
Unloading, Placing and removing
complete.
Rate (Rs.)
Chapter Cost Rate (Rs.)
Description Unit
Code No (Rs.) 1st Day Subsequent
days(per Day)
1 2 3 4 5 6
5.1 Chairs :
5.1.1 PVC chair Each. 500.00 9.00 2.00
Plastic cane chair of Aluminium pipe with arms. Each. Deleted

5.1.2 Steel pipe pedded chair Each. 1200.00 30.00 10.00
5.2 Tables :
5.2.1 Wooden Table 6' x 3' (Babool). Each. 800.00 25.00 7.00
5.2.2 Wooden Table 6' x 2' (Babool). Each. 750.00 30.00 10.00
5.2.3 Centre Table sunmica Top 2'x4' Each. 1800.00 50.00 15.00
5.2.4 Centre Table Glass Top 2'x4' Each. 2250.00 150.00 50.00
5.2.5 Peg Table Sunmica Top 1'x1' Each. 800.00 15.00 5.00
5.3 Floor Covering :

5.3.1 Cotton Durry (Old). Sqm. 18.00 2.00 0.60
5.3.2 Cotton Durry (New). Sqm. 30.00 3.00 1.00
5.3.3 Non woven synthtic carpet (Red/Green) (New) Sqm. 160.00 25.00 15.00
5.3.4 Non woven synthtic carpet (Red/Green) (old) Sqm. 160.00 20.00 5.00
5.3.5 Woolen Carpet (New). Sqm. 600.00 35.00 12.00
5.3.6 Woolen Carpet (old). Sqm. 600.00 24.00 8.00
5.4 White Cotton chader (Sheet) (Washed) Sqm. 40.00 20.00 2.00
5.5 Pipe Pandal with covering ht from to 12 to 18 ft Sqm 30.00 10.00
5.6 Curtain cloth (View cutter ) made out of steel Sqm 25.00 7.00
pipe frame covering with good quality white
cloth to cut view including making holes and
made necessary strengthening support against
wind pressure complete .
5.7 Kanat fixed with Tent. (15'x6') Each. 850.00 40.00 15.00
5.8 Kanat fixed without Tent. (15'x6') Each. 850.00 50.00 10.00
G-5 [39]
Rate (Rs.)
Description Unit
days(per Day)
1 2 3 4 5 6
5.9 5mm Galvanised Iron (G.I) pipe 6 mtr. long with Each. 72.00 33.00
new silk flag.
5.10 Water Proof Tripal. Sqm. 10.00 4.00
5.11 Wooden stage height 60cm.with steps complete Sqm. 48.00 12.00
5.12 Wooden stage height 120 to 180 cm.with steps Sqm. 150.00 50.00
made of 50 mm dia iron pipe frame with
adjustable height system and having smooth top
wooden board complete .
5.13 Cotton mattress with white sheet (chader). Each 24.00 10.00
5.14 Dunlop mattress with white chadar size 6'x3'. Each. 40.00 12.00
5.15 Massand with white cover. Each. 14.00 5.00
5.16 Speech Stand having Sunmica top. Each. 2850.00 150.00 60.00
5.17 white cotton cloth cover for padded chair Each. 10.00 4.00
inculding ribbon
Barricading
5.18 Barricading with Sal ballies as per design Rmt 33.00
including tying with vertical post by coconut
strings including digging out holes in all types of
soil complete in all respect with two horizontal
members height 1.2 m upto 1.5m above ground
level and vertical supports upto 2.5 centre and
upto 3 days period including removal and
cleaning the site complete in all respect &
including dressing of sides and providing retro
reflective tapes for traffic safety as per direction
of Engineer-in charge in all types of soil.
5.19 Barricading with M.S. Pipe as per design Rmt. 28.00

including tying with vertical post including
digging out holes in all types of soil complete in
all respect with two horizontal members height
1.2 m upto 1.5m above ground level and vertical
supports upto 2.5 centre and upto 3 days period
including removal and cleaning the site complete
in all respect & including dressing of sides and
providing retro reflective tapes for traffic safety
as per direction of Engineer-in charge in all
types of soil.
G-5 [40]
Rate (Rs.)
Description Unit
days(per Day)
1 2 3 4 5 6
5.20 Add extra for item No. 5.18 & 5.19 in Rmt 3.00
barricading for each subsequent day after 3 days
5.21 Making of holes in cement concrete/ Bitumenous Each 185.00 -

road by power driven hammer for barricating
work as per direction of Engineer in charge
5.22 Hire charges for folded type two seater sofa set Each 240.00 80.00
(cum bed) with good quality white cloth cover
5.23 VIP Chair with cushion Each 100.00 40.00
5.24 Add extra for hire charge for providing welded Sqm 30.00 6.00
mesh size 25x25 mm (16SWG) over barricating
(excluding hire charge of barricating)
5.25 Water Proof Tent with pipe pandal supported Sqm 90.00 25.00
with Bamboo/Balli /MS Pipe frame.
5.26 Water proofing canopy with ornamental frill,

inner ceiling & curtains
5.26 .1 Upto size 20'x20' Sqm 175.00 40.00
5.26.2 Above size 20'x20' Sqm 250.00 55.00
5.27 Deluxe sofa

5.27.1 Three Seater Each 700.00 200.00
5.27.2 Two Seater Each 500.00 150.00
5.27.3 Single Seater Each 300.00 100.00
5.28 Chemical toilet with house keeping arrangement Each 6000.00 1200.00
and providing liquid soap, tissues, comb,
freshener etc.
5.29 Water proof dome with truss steel strcture, inner

ceiling & curtains
5.29.1 60' span Sqm 225.00 45.00
5.29.2 80' span Sqm 250.00 50.00
5.29.3 90' span Sqm 260.00 52.00
5.30 Aluminium German Hanger Tent Roof made up Sqm 400.00 80.00
of Waterproof, Fire resistant Synthetic Rubber
fabric of 885 GSM.
G-5 [41]
Rate (Rs.)
Description Unit
days(per Day)
1 2 3 4 5 6
G-5 [42]
CHAPTER B-1
EARTH WORK
Note : The items in this Chapter will cover Earth Work for
Building and Sanitary Work.
Chapter
Code No
1 2 3 4
1.1 Earth work in surface excavation not exceeding 30cm. in Sqm 35.00
depth but exceeding 1.5 meter in width as well as10 Sqm on
plan including disposal of excavated earth up to 50 Mtr. and
lift up to 1.5 Mtr. disposed soil to be levelled and neatly
dressed : All kinds of soil
1.2 Earth work in rough excavation, banking excavated earth in Cum 272.00
layers not exceeding 20cm in depth, breaking clods watering,
rolling each layer with 1/2 tonne roller, or stone or steel
rammers and rolling every 3rd and top- most layer with
power roller of minimum 8-10 tonne capacity and dressing up
in embankment for roads, flood banks marginal banks and
guide banks or filling up ground depressions, lead up to 50
Mtr. and lift up to 1.5 Mtr.:All kinds of soil
1.3 Banking excavated earth in layers not exceeding 20cm. in Cum 171.00
depth breaking clods watering, rolling each layer with 1/2
tonne roller, or stone or steel rammers, and rolling every 3rd
and top- most layer with power roller of 8-10 tonne capacity
and dressing up in embankments for roads, flood banks
marginal banks, and guide banks etc. lead up to 50 Mtr. and
lift up to 1.5 Mtr. All kinds of soils
1.4 Deduct for not rolling with power roller of 8 to 10 tonne Cum 3.00
capacity for banking excavated earth in layers not exceeding
20 cm in depth.
1.5 Deduct for not watering the excavated earth for banking. Cum 12.00
BSR_B1 [43]
Chapter
Code No
1 2 3 4
1.6 Earth work in excavation by mechanical means (Hydraulic Cum 175.00

excavator )/ manual means over areas (exceeding 30cm in
depth. 1.5m in width as well as 10 sqm on plan) including
disposal of excavated earth, lead upto 50m and lift upto 1.5 m
, disposed earth to be levelled and neatly dressed : All kinds
of soil
1.7 Earth work in excavation/ by mechanical means (Hydraulic

Excavator)/ manual means over areas (exceeding 30 cm in
depth, 1.5m in width as well as 10 sqm on plan) including
disposal of excavated earth, lead upto 50 m and lift upto 1.5 m
, disposed earth to be levelled and neatly dressed:
1.7.1 Ordinary rock Cum 251.00
1.7.2 Hard rock (requiring blasting) useful material 30% Cum 410.00
1.7.3 Hard rock(blasting prohibited) useful material 30% Cum 540.00
1.8 Earth work in excavation by mechanical means (Hydraulic Cum 178.00

Excavator )/ manual means in foundation trenches or drains
(not exceeding 1.5 m in width or 10 sqm on plan) including
dressing of sides and ramming of bottoms, lift upto 1.5 m,
including taking out the excavated soil and depositing and
refilling of jhiri with watering & ramming and disposal of
surplus excavated soil as directed with in a lead of 50 meter.
All kinds of soils
1.9 Excavation work by mechanical means (Hydraulic excavator) /

manual means in foundation trenches or drains not exceeding
1.5 m in width or 10 sqm on plan including dressing of sides
and ramming of bottoms lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus excavated soil as
directed with a lead in a 50 meter including stacking of useful
material if available :
BSR_B1 [44]
Chapter
Code No
1 2 3 4
1.10 Excavating trenches of required width for pipe cables, etc.

including excavation for sockets, and dressing of sides,
ramming of bottoms, depth up to 1.5 Mtr. including taking out
the excavated soil, and then returning the soil as required in
layers not exceeding 20cm in depth including consolidating
each deposited layer by ramming, watering etc. and disposal of
surplus excavated soil as directed within a lead of 50 Mtr.: All
kinds of soil
1.10.1 Pipes cables etc. not exceeding 80mm dia Mtr. 116.00
1.10.2 Pipes cables, etc. exceeding 80mm dia but not exceeding Mtr. 187.00
300mm dia.
1.10.3 Pipes, cables etc. exceeding 300mm dia but not exceeding Mtr. 294.00
600mm dia.
1.11 Add extra for excavating trench for pipes, cables etc. in all Mtr. 141.00%
kinds of soil for depth exceeding 1.5 Mtr. but not exceeding 3
Mtr.
1.12 Add extra for excavating trench for pipes, cables etc. in all Mtr. 361.00%
kinds of soil for depth exceeding 3 Mtr. but not exceeding 4.5
Mtr.
1.13 Excavating trenches of required width for pipes cables etc.

including excavation for sockets, depth up to 1.5 Mtr.
including taking out the excavated materials, refilling the soil
as required in layers not exceeding 20cm in depth including
consolidating each deposited layers by ramming, watering etc.,
stacking serviceable material for measurements and disposal
of unserviceable material as directed, with in a lead of 50 Mtr.
1.13.1 ORDINARY ROCK
1.13.1.1 Pipes cables etc. not exceeding 80mm dia Mtr. 162.00
1.13.1.2 Pipes cables, etc. exceeding 80mm dia but not exceeding Mtr. 399.00
300mm dia.
1.13.1.3 Pipes, cables etc. exceeding 300mm dia but not exceeding Mtr. 458.00
600mm dia.
1.13.2 HARD ROCK (REQUIRING BLASTING) USEFUL

MATERIAL 30% OF VOLUME EXCAVATED
300mm dia.
600mm dia.
BSR_B1 [45]
Chapter
Code No
1 2 3 4
1.13.3 HARD ROCK (BLASTING PROHIBITED) USEFUL
MATERIAL 30% OF VOLUME EXCAVATED

300mm dia.
600mm dia.
1.14 Add extra for excavating trenches for pipes, cables, etc. in Mtr. 104%
ordinary/hard rock exceeding 1.5 m in depth but not exceeding
3 m. (Rate is over corresponding basic item for depth upto 1.5
metre.)
1.15 Add extra for excavating trenches for pipes, cables, etc. in Mtr. 130.00%
ordinary/hard rock exceeding 3m in depth but not exceeding
4.5 m. (Rate is over corresponding basic item for depth upto
1.5 metre.)
1.16 P & F Close timbering in trenches including strutting, shoring

and packing cavities (wherever required) etc. Complete
(Measurement to be taken of the face area timbered):
1.16.1 Depth not exceeding 1.5 Mtr. Sqm 95.00
1.16.2 Depth exceeding 1.5 Mtr. but not exceeding 3 Mtr Sqm 99.00
1.16.3 Depth exceeding 3 Mtr. but not exceeding 4.5 Mtr Sqm 109.00
1.17 P & F Close timbering in case of shafts, wells, soak pits, man-
holes and the like including strutting, shoring and packing
cavities (wherever required) etc complete (Measurement to be
taken of the face area timbered):
1.18 P & F Close timbering over area including strutting, shoring

and packing cavities (wherever required) etc. complete
(Measurement to be taken of the face area timbered):
BSR_B1 [46]
Chapter
Code No
1 2 3 4
1.19 Add extra for planking, strutting and packing material for Sqm 1254.00
cavities (in close timbering) if required to be left permanently
in position (face area of timber permanently left to be
measured)
1.20 P & F of Open timbering in trenches including strutting,

shoring complete (measurements to be taken of the face area
timbered)
1.21 P & F of Open timbering in case of shafts, wells, soak pits,

manholes and the like including strutting, shoring complete
(Measurement to be taken of the face are timbered):
1.22 P & F Open timbering over area including strutting, shoring

etc complete (Measurement to be taken of the face are
timbered):
1.23 Add extra for planking and strutting in open timbering if Sqm 629.00
required to be left permanently in position (face area of timber
permanently left to be measured)
1.24 Add extra rate for quantities of works, executed :

1.24.1 In or under water and /or liquid mud, including pumping out P.Mtr. 20%
water as required depth
1.24.2 In or under foul position , including pumping out water as P.Mtr. 25%
required depth
Note :- Note for item no. 1.24:- The extra percentage rate is applicable
in respect of each item but limited to quantities of work
executed in these difficult conditions. The unit, namely, metre
depth, to be considered for payment, shall be the depth
measured from the sub soil water level up to the centre of
gravity of the qty executed in difficult condition. The depth
shall be reckoned correct to 0.10m, 0.05m or more shall be
taken as 0.10m and less than 0.05m ignorel.
BSR_B1 [47]
Chapter
Code No
1 2 3 4
1.25 Filling available excavated earth (excluding rock) in trenches, Cum 64.00
plinth side of foundation etc. in layers not exceeding 20 cm. in
depth, consolidating each deposited layer by ramming and
watering including lead up to 50 meter and with all lift.
1.26 Add extra for foundation/trenches/drains for every additional

lift of 1.5 Mtr. or part thereof in
1.26.1 All kinds of soil Cum 34.00
1.26.2 Ordinary or hard rock. Cum 61.00
1.27 (a) Supplying and Filling in plinth with river sand under floors Cum 1024.00
including watering ramming consolidating and dressing
complete including cost of sand
1.27 (b) Supplying and Filling in plinth with blown sand under floors Cum 450.00
including watering ramming consolidating and dressing
complete including cost of sand.
1.28 Surface dressing of the ground including removing vegetation Sqm 9.00
and inequalities not exceeding 15cm deep and disposal of
rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr. : All kinds of
soil
1.29 Ploughing the existing ground to a depth of 15 cm to 25 cm Sqm 9.00

and watering the same : All kinds of soil
1.30 Excavating holes upto 0.5 cum including getting out the
excavated soil, then returning the soil as required in layers not
exceeding 20 cm in depth, including consolidating each
deposited layer by ramming, watering etc, disposing of surplus
excavted soil; as directed within a lead of 50 m and lift to 1.5
m
1.30.1 All kinds of soil Cum 94.00
BSR_B1 [48]
Chapter
Code No
1 2 3 4
1.31 Clearing jungle including uprooting of rank vegetation, grass, Sqm 5.00
brush wood, trees and saplings of girth upto 30 cm measured
at a height of 1 m above ground level and removal of rubbish
upto a distance of 50 m outside the periphery of the area
cleared.
1.32 Clearing grass and removal of the rubbish upto a distance of Sqm 2.00
50 m outside the periphery of the area cleared.
1.33 Felling trees of the girth (measured at a height of 1 m above

ground level) including cutting of trunks and branches
removing the roots and stacking of serviceable material and
disposal of unserviceable material.
1.33.1 Beyound 30 cm girth upto including 60 cm girth Each 140.00
1.33.4 Above 240 cm girth Each 5768.00
1.34 Supplying chemical emulsion in sealed containers including litre 243.00

delivery as specified. Chlorpyriphos/Lindane emulsifiable
concentrate of 20%
1.35 Diluting and injecting by hand operated pressure pumps chemical

Emulsion timber ground treatment [TCGT] in ratio 1: 2 as per
manufacturers specification for POST CONSTRUCTIONAL Anti-
termite treatment (as per IS 6313) part - III 1971 as amended from
time to time) (excluding the cost of chemical emulsion) :
1.35.1 Along external wall where the apron is not provided using metre 12.00
chemical emulsion @ 7.5 litres / sqm of the vertical surface of
the substructure to a depth of 300mm including excavation
channel along the wall & rodding etc. complete : With
Chlorpyriphos/Lindane E.C. 20% with 1% concentration
BSR_B1 [49]
Chapter
Code No
1 2 3 4
1.35.2 Along the external wall below concrete or masonry apron metre 17.00
using chemical emulsion @ 2.25 litres per linear metre
including drilling and plugging holes etc. With
1.35.3 Treatment of soil under existing floors using chemical sqm 87.00
emulsion @ one litre per hole, 300 mm apart including drilling
12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor. With
1.35.4 Treatment of existing masonry using chemical emulsion@ one metre 13.00
litre per hole at 300mm interval including drilling holes at 45
degree and plugging them with cement mortar 1:2(1 cement :
2 coarse sand) to the full depth of the hole. With
1.35.5 Treatment at points of contact of wood work by chemical metre 124.00

emulsion Chlorpyriphos/Lindane (in oil or kerosene based
solution) @ 0.5 litres per hole by drilling 6 mm dia holes at
downward angle of 45 degree at 150mm centre to centre and
sealing the same. With Chlorpyriphos/Lindane E.C. 20%
with 1% concentration
1.36 Diluting and injection Chloropyrifos Emulsifiable concentrate 20% sqm 47.00
with 1% concentration for PRE-CONSTRUCTIONAL Anti termite
treatment as per IS 6313 part III as amended from time to time and
creating a continuous chemical barrier under and around the column
pits, wall trenches, basement excavation, top surface of plinth filling,
junction of wall and floor along the external perimeter of building
expansion joints, over the top surface of consolidated earth of which
aproch is to be laid surrounding of pipes and conduits etc. complete
as per specification (Plinth floor area only shall be measured for
payment and excluding the cost of chemical emulsion) .
BSR_B1 [50]
Chapter
Code No
1 2 3 4
1.37 Drilling borehole and conducting standard penetration test from
ground level and upto the depth given below or upto refusal
whichever occurs earlier as per IS:2131-1981 and IS 2132-1986.The
work also includes the determination of Safe Bearing Bearing
capacity as per IS:6403-1981 and IS:8009-1976 from disturrbed and
undisturbed samples. The following properties should be also
reported as per related IS codes .The whole work should be done as
per direction given by Engineerand -in-charge and upto satisfaction
of Engineer in Charge.
(i) Grain Size Anaylsis
(ii) Atterberg's Limit
(iii) Bulk Density
(iv) Moisture Cotent
(v) Specific Gravity
(vi) Shear Parameters including Cohesion and Angle of Internal
Friction
(a) Upto 6m depth Each 8635.00
(b) upto 10m depth Each 11550.00
1.38 Anti-termite treatment of existing floor and wall using Sqm 90.00
Imidacloprid 30.5% EC non repellent, odorless, low dose,
environimentally safe Termiticide with rapid action non
corrosive stain free, by injecting the emulsion as per
specification and plugging with cement mortar 1:2 ( 1 cement :
2 coarse sand) in the whole floor area. The pesticide emulsion
of imidacloprid 30.5% EC mixed with water in the ration of
1:474 will be pumped by a motorized spray pump specified
manner. The net floor and wall area treated will be measured
for payment.
BSR_B1 [51]
Chapter
Code No
1 2 3 4
1.39 Anti termite treatment of floor using Imidacloprid 30.5% EC Sqm 216.00
non repellent, odorless, low dose, environmentally safe
terniticide with rapid action non corrosive stain free, by
drilling 12mm diameter holes 300mm apart injecting the
emulsion as per specification and plugging with cement mortar
1:2 ( 1 cement : 2 coarse sand) in the whole floor area DPE
12mm dia termitube system with required number of junction
boxes are to be installed. The termitube will run all along the
perimeter wall both inside and outside. In the middle area the
termitube to be installed at an interval of 1.00 Mtr. or less both
ways as required with sufficient number of junction boxes to
pump the emulsion. After successful testing of termitube,
pesticide emulsion of imidacloprid 30.5% EC mixed with
water in the ration of 1:474 will be pumped by a motorized
spray pump from the junction box in specified manner. The
plinth area of the area treated will be measured for payment.
BSR_B1 [52]
CHAPTER B-2
MORTAR
NOTE :
1 Complete rate for mortar is inclusive of cost of material, T & P
& cost of water with all leads and lifts involved.
2 Compressive strength of mortars shall be as per the relevant
specifications.
3 Cement mortar shall be prepared by mechanical mixer only.
Chapter
Code No
1 2 3 4
CEMENT SAND MORTAR :
2.1 Cement sand Mortar 1 : 2 (1 cement : 2 sand) Cum 5015.00

2.3 Cement sand Mortar 1 : 4 (1cement : 4 sand) Cum 3401.00
2.5 Cement sand Mortor 1 : 6 (1 cement : 6 sand) Cum 2658.00
2.6 Cement sand Mortor 1 : 8 (1 cement : 8 sand) Cum 2200.00
2.7 Cement sand Mortar 1:10 (1 cement :10 sand) Cum 1953.00
CEMENT MARBLE POWDER MORTAR :
2.8 Cement marble powder mortar 1 : 2 (1-cement : 2-marble Cum 4936.00

powder)
2.9 Cement marble powder mortar 1 : 4 (1cement : 4-marble Cum 2912.00
powder)
2.10 White cement marble powder mortar 1 :2 (1 white cement : 2 Cum 12185.00
marble powder
2.11 White cement marble powder mortar 1:3 (1 white cement : 3 Cum 9471.00
marble powder)
2.12 White cement marble powder mortar 1:4 (1 white cement : 4 Cum 6171.00
marble powder)
MUD MORTAR :
2.13 Mud Mortar including specified ingredients. Cum 228.00
BSR_B2 [53]
CHAPTER B-3
CONCRETE WORK
NOTE :
1 The rates are for all lead of cement, ballast, sand, and grit etc.
at site of work and are inclusive of laying and mixing, all T &
P, mixer, vibrator with P.O.L, scaffolding etc. including cost
of curing.
2 For all concrete work only coarse sand shall be used.
3 Concrete mix prepared by power-driven mechanical mixer
shall be used.
4 Under exceptional conditions, where mechanical mixer and
vibrator are not used (with the approval of Engineer-in-
Charge) rates to be reduce by 15%, for mechanical mixer and
10 % for vibrator.
Chapter
Code No
1 2 3 4
CEMENT CONCRETE (CAST-IN-SITU):
3.1 Providing and laying in position cement concrete including

curing, compaction etc. complete in specified grade excluding
the cost of centering and shuttering - All work up to plinth
level.
3.1.1 M20 grade Nominal Mix Cum 4915.00

1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20mm nominal size).
1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate
20mm nominal size).
40mm nominal size).
20mm nominal size).
40mm nominal size).
3.1.6 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 Cum 3302.00
mm nominal size).
3.1.7 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate Cum 2956.00
40mm nominal size).
BSR_B3 [54]
Chapter
Code No
1 2 3 4
3.2 Providing and laying cement concrete including curing,

compaction etc. complete in retaining walls, return walls,
walls (any thickness) including attached pilasters, columns,
piers, abutments, pillars, posts, struts, buttresses, string or
lacing courses, parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, levelling course etc up to floor five
level excluding the cost of centering and shuttering.

1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20mm nominal size).
20mm nominal size).
40mm nominal size).
20mm nominal size).
40mm nominal size).
CEMENT CONCRETE (PRE-CAST):
3.3 Providing and fixing up to floor five level pre cast cement
concrete string or lacing courses, copings, bed plates, anchor
blocks, windows sills, shelves, louvers steps, staircases, etc.
including carriage, hoisting and setting in position with cement
mortar 1:3 (1 cement : 3 coarse sand) cost of required
centering, shuttering and finishing smooth with 6 mm thick
cement plaster 1:3 (1 cement : 3 fine sand) on exposed surface,
including all T & P, curing etc. complete:

20mm nominal size).
20mm nominal size).
BSR_B3 [55]
Chapter
Code No
1 2 3 4
3.4 Add Extra for concrete work in superstructure above floor V Cum 408.00
level for each four floors or part thereof.
3.5 Add Extra for laying concrete in or under water or liquid mud Per Cum 279.00
including cost of pumping or bailing out water and removing per Mtr.
depth
slush etc. complete.
Note : The quantity will be calculated by multiplying the depth

measured from the sub-soil water level up to centre of gravity
of concrete under sub-soil water level with quantity of
concrete in cum executed under sub-soil water. The depth of
centre of gravity shall be reckoned correct to 0.1 m; 0.05 m or
more shall be taken as 0.1 m and less than 0.05 m ignored.
3.6 Add Extra for laying concrete in or under foul positions. Cum 125.00
DAMP- PROOF COURSE AND PRECASTCOPING
3.7 Providing and laying damp-proof course with cement concrete grade
M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof
compound complete as per specification .
3.7.1 50mm thick. Sqm 391.00
3.7.2 75mm thick. Sqm 546.00
3.8 Providing & fixing precast cement concrete coping 1 : 2 Sqm 367.00
: 4 mix 50mm thick complete as per specification :
3.9 Cement, Concrete flooring/ cement plaster/ Cement Concret Per Pack 66.00
Road, Plain or RCC work & water retaining works providing 125 gm.
and mixing Additive of Synthetic polypropylene Fibrillated
mesh fibers free form any reprocess Olefins &comfirming to
ASTM C 1116 Type III 4.1.3 Having grade 6mm/12mm
/18mm melting point of 165 deg.C., strength>600 mpa Sp.
Gravity:0.92g/cc, diameter 10-70 microns. It is required in
specified ratio @ 0.25% (125 Gm. Fibers in 50 Kg. cement)
for use. Mix it directly with contents in rotating site mixer
direction of Engineer in charge with all leads and lifts.
BSR_B3 [56]
Chapter
Code No
1 2 3 4
3.10 Cement, Concrete Flooring/Cement Plaster/Cement Comcrete per 100 61.00

Road, Plain or RCC work & water retaining works providing gram
and mixing admixture of Synthetic Nylon-6 Fibres or pack
polycaprolactam free from any reprocess Olefins & confirming
to ASTM C 1116 Type III 4.1.3 Having grade 6mm / 12 mm
/18 mm melting point 220 deg. C, Sp. Gravity:1.14 g/cc,
diameter 10-40 microns. It is required in specific ratio @
0.20% (100 gm Fibres in 50 Kg Cement) for use as specified
by manufacture specification and direction of Engineer In-
charges with all leads and lifts.
BSR_B3 [57]
CHAPTER B-4
REINFORCED CONCRETE WORK
Note:
1 Rates for complete work laying, compaction, vibration, curing
and all types of T & P, including P.O.L. etc and grinding and
mixing of mortar.
2 The rates for centering and shuttering are for steel plates
shuttering for complete work including centering, shuttering
nails and other such items required. The shuttering shall be
removed after required time as per instruction by Engineer-
in-charge & IS 456:2000.
3 The Concrete for all grade shall be produced in conformation

to the laid down procedures and all relevant clauses of IS 456 :
2000 and further amendments.
4 If any machinery like mechanical mixture machine, vibrator or

mechanical mortar miller etc. is supplied by the Department,
the hire charges as per department rate will be charged and
transportation cost will be borne by the contractor.
5 No R.C.C. work shall be permitted without the use of

mechanical mixer by hopper and vibrator.
6 Contractor at site shall arrange a stand by mechanical mixer

and extra vibrator if more than 20 cum of RCC is to be done in
a single day.
7 The rate for R.C.C. work is inclusive of cost of providing

cement mortar covers Blocks. The rates for centering includes
placement of cover blocks.
8 (a) For Design mix ,the producer / manufacturer / contractor shall

obtain mix proportions of each grade of concrete from a
recognized laboratory and submit detail to the Engineer-in-
charge for approval. Concrete of any particular design mix
and grade shall be produced / manufactured by weight batched
hopper mechnical mixer with assigned capacity of mixing
drum as directed by Engineer-in-charge.
8 (b) For Nominal mix concreting work,the coarse aggregates and

fine aggregates will be measured by the standard boxes and
cement by bag.The boxes should be designed for 1/2 bag,1 bag
etc. of cement.
BSR_B4 [58]
9 If any change required in the approved Job Mix design

ingredient, Fresh Job Mix design shall be obtain by the
contractor from approved lab and shall be got approved from
Engineer-in-charge
Chapter
Code No
1 2 3 4
CAST-IN-SITU CONCRETE:
4.1 Providing and laying in position specified grade of cement Cum 4934.00
concrete for all RCC structural elements upto plinth level
including curing, compaction, finishing with rendering in
cement sand mortar 1:3 (1 cement: 3 coarse sand) and making
good the joints and cost of plastizers( if required) excluding
the cost of centering, shuttering and reinforcement.
M20 grade Nominal Mix / Design Mix
concrete for RCC structural elements upto floor five level
good the joints and cost of plastizers (if required ) excluding
the cost of centering, shuttering and reinforcement for Walls
(any thickness) including attached pilasters, buttresses, plinth
and string courses, fillets, columns, pillars, piers, abutments,
posts and struts etc.
the cost of centering, shuttering and reinforcement for Beams,
suspended floors, roofs, griders having slopes up to 15º,
landings, balconies, shelves, chajjas, lintels, bands, plain
windows sills, staircases and spiral staircases etc.
BSR_B4 [59]
Chapter
Code No
1 2 3 4
the cost of centering, shuttering and reinforcement for Arches,
arch ribs, domes, vaults, shells, folded plate, chimneys, shafts ,
roofs having slope more than 15º ,vertical and horizontal fins
individually or forming box louvers, facias and eaves boards
4.5 Providing and laying in position Ready mix concrete Cum 6089.00
manufactured in fully automatic Batching Plant and
transported to site in transit mixer for having continous
agitated mixer, manufactured as per approved mix design of
specified grade of RCC work including pumping of R.M.C.
from transit mixer to site of laying , exculding the cost of
centering, shuttering and reinforcement with all lead and lift
including cost of admixtures in recommended portion as per IS
9103 to accelerate/ retard setting of concrete, improve
workability without impairing strength and durability as per
direction of Engineer in charge. All works upto floor V floor
M20 grade Design Mix by using cement as per codal
provision.
4.6 Add extra for providing richer mixes respectively at all floor
levels
4.6.1 Providing M-25 grade concrete by using cement as per codal Cum 69.00
provision instead of M-20 grade design mix.
4.6.4 Providing M- 40 grade concrete by using cement as per codal Cum 242.00
4.7 Add extra for RCC work in superstructure above floor five Cum 112.00
level for each four floor or part thereof .
4.8 Deduct for using less cement quantity than the quantity as Kg 7.00
provided in the item of design mix concrete/RMC as arrived
as per mix design.(on cement quantity)
BSR_B4 [60]
Chapter
Code No
1 2 3 4
FORM WORK
4.9 Centering and Shuttering with plywood or steel sheets Sqm. 157.00
including strutting, propping bracing both ways and removal
of formwork for foundation , footings, strap beam, raft , bases
of columns etc.
4.10 Centering & shuttering with plywood or steel sheets including

strutting, propping bracing both ways with steel props and
removal of formwork for upto floor five level for :
4.10.1 Walls (any thickness) including attached pilasters, Sqm 289.00
buttresses plinth and string course.
4.10.2 Suspended floors, roofs, landings, staircases, balconies, Sqm 340.00
girders, cantilevers, bands, coping bed plates, anchor blocks,
sills, chhajjas, lintel, beam, plinth beam etc.
4.10.3 Columns, pillars, posts and struts etc. Sqm. 375.00
4.10.4 Spiral staircases, chimneys shafts etc. Sqm. 301.00
4.10.5 Arches, domes, vaults etc. up to 6 Mtr span. Sqm. 879.00
4.10.6 Arches, domes, vaults etc exceeding 6 Mtr span Sqm. 329.00
4.10.7 Vertical and horizontal fins individually or forming box Sqm. 494.00
louvers band, facias and eaves boards.
4.10.8 Add extra for shuttering in circular work (in respective Sqm 20%
centering and shuttering items)
4.10.9 Cornices and mouldings Sqm 474.00
4.10.10 Grid roofing with panel area less than 2.25 Sqm. (contact area Sqm 405.00
to be measured).
4.10.11 Deduct for using wooden vertical member instead of steel Sqm 20%
props
Note : The uses of wooden member is allowed in works which
A & F sanction up to 25 lacs only.
4.11 Add extra for additional height in centring, shuttering where Sqm 171.00
ever required with adequate bracing, propping etc. including
cost of de-shuttering and decentring at all levels, over a height
of 3.5 m, for every additional height of 1 metre or part thereof
(Plan are is to be measured)
4.12 Add extra for centering and shuttering work in superstructure Sqm. 34.00
above floor five level for each four floor or part thereof .
BSR_B4 [61]
Chapter
Code No
1 2 3 4
STEEL REINFORCEMENT:
4.13 Providing and fabricating reinforcement for R.C.C. work

including straightening, cutting, bending, placing in position
and binding (including cost of binding wire) all complete up to
floor five level.
('Original producers' who manufacture billet directly from
iron ores and roll the bilets to produce steel conforming to
IS:1786)
4.13.1 Cold twisted deformed bars (IS : 1786). Kg. 77.00

4.13.2 Hot rolled deformed bars (IS : 1139). Kg. 77.00
4.13.3 Thermo-mechanically Treated bars (Conforming of relevent IS Kg. 77.00
code)
4.14 Labour charges for cutting, bending for fabrication and Kg. 12.00
binding reinforcement (plain or tor/ribbed/TMT steel) as per
drawing and design for R.C.C. and R.B. work including cost of
binding wire with all lead and lift up to floor five level
complete.
4.15 Add extra for reinforcement in superstructure above floor five Kg 3.00
level for each four floor or part thereof .
PRECAST CEMENT CONCRETE

4.16 Providing and fixing of 200mm thick RCC precast panel made Sqm 4076.00
of M35 grade concrete with required steel, rebar chair, wire
mesh, connection bolt, fastener and beveled washer with
erection ready complete in all respect with all lead.
4.17 Providing and fixing of 150 mm thick RCC precast panel made Sqm 3847.00
of M35 grade concrete with required steel, rebar chair, wire
mesh, connection bolt, fastener and beveled washer with
erection ready complete in all respect with all lead.
4.18 Providing, hoisting and fixing up to floor five level precast

reinforced concrete work in Nominal M20 grade mix including
cost of required centering, shuttering, finishing, smooth with 6
mm thick cement plaster 1:3 (1 cement: 3 fine sand) on
exposed surface complete excluding cost of reinforcement
4.18.1 String courses, copings, bed plates, anchor blocks, plain Cum 7030.00
window sills etc
BSR_B4 [62]
Chapter
Code No
1 2 3 4
4.18.2 Small lintels not exceeding 1.5 m clear span Cum 9163.00
4.18.3 Mouldings as in cornices, windows sills etc. Cum 10262.00
4.18.4 Lintels beams and bressumers including setting in cement Cum 8636.00
mortar 1:3 (1 cement: 3 coarse sand) aggregate 20mm nominal
size).
4.18.5 Beams, Columns, slabs, Shelves, Vertical & horizontal fins Cum 13036.00
individually or forming box louvers setting in cement mortar
1:2 (1 cement: 2 sand) or grouts as per requirements
4.19 Providing, hoisting and fixing up to floor five level precast

cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 6mm nominal size) reinforced with 1.6 mm
dia Mild steel wire including centring and shuttering,
roughening cleaning, fixing and finishing in cement mortar 1 :
3 (1 cement : 3 fine sand ) etc complete as per approved design
excluding plastering of jambs, sills and soffits
4.19.1 50mm thick Sqm 630.00
4.19.2 40 mm thick Sqm. 534.00
4.19.3 30mm thick Sqm. 492.00
4.20 Add extra over for both side jali Sqm. 20%
ENCASING ROLLED STEEL SECTION
4.21 Encasing rolled steel section in beams and columns, with M20 Cum 8460.00
Nominal Mix cement concrete including centering and
shuttering complete but excluding cost of reinforcement.
4.22 Encasing rolled steel section in grillages with M20 Nominal Cum 5607.00
Mix including centering and shuttering complete but excluding
cost of expanded metal and hangers.
4.23 Add Extra for providing and fixing expanded metal mesh of Sqm. 381.00
size 20x60mm and strands 3.25mm wide 1.6mm thick
weighing 3.64 kg. per sqm. for encasing of rolled steel
sections in beams, columns and grillages excluding cost of
hangers.
BSR_B4 [63]
Chapter
Code No
1 2 3 4
4.24 Providing ,arranging and erecting 50mm dia M.S. pipe cup
lock shuttering arrangement above the ground level upto the
height given below. The girding arrangement of cup lock
system should have 2.50 meter 3.00 meter long coupling pipes
and 0.90mt long lacer pipe (Horizontal bracing pipes)
reconnected in both ways so as to make a square grid of size
0.90x0.90 meter in plan. The Horizontal bracing and lacer
pipes should have a maximum spacing of 1.50 meter c/c both
ways. The bottom of the coupling pipe must rest over a firm
support at ground. the shuttering plates of 900mmx600mm
size duly braced by angle supports and should rest over
50mmx50mm size wooden logs supported by 75x40x6mm size
channels and
U-Jacks made of M.S.25mm dia steel bars with adjustable
thread and lock arrangement placed at a spacing of 0.60 meter
c/c. The whole arrangement should be duly shored from
ground by U-Jacks and lacer pipes to prevent any lateral
movement during casting of slabs. Additional support as per
direction of engineer in charge are also to by provided
wherever felt necessary. The work would include
transportation of material erecting the whole grid structure,
bracing both way, shoring, leveling of shuttering and removal
of form work complete as per direction of Engineer in charge
for all the floors upto the height of:-
(a) Upto 6.63 meter height Sqm. 958.00
(b) Upto 9.14 meter height Sqm. 1722.00
4.25 Rebarring work in old R.C.C structures including making bore

hole to adjust required bar diameter and filling a good quality
filler to provide a tensil strength as per requirement and fix the
Bar to the saction including cost of bars.
(i) 8 mm bar Each 429.00
(ii) 10 mm bar Each 468.00
(iii) 12 mm bar Each 528.00
(iv) 16 mm bar Each 831.00
(v) 20 mm bar Each 1078.00
(vi) 25 mm bar Each 1559.00
BSR_B4 [64]
CHAPTER B-5
BRICK WORK
Note :
1 Fly ash bricks shall be invariably be used in building works
except petty or repair works, where clay bricks can be used.
Chapter
Code No
1 2 3 4
5.1 Brick masonry with F.P.S. bricks of class designation 75 in

foundation and plinth with bricks
5.1.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Cum. 4469.00

5.1.3 Mud mortar Cum. 3265.00
5.2 Brick work with F.P.S. bricks of class designation 75 in

superstructure above plinth level upto floor V level in all
shapes and sizes in :

5.2.3 Mud mortar Cum. 3792.00
5.3 Add extra for Square or Rectangular Pillars in Superstructre

brick work up to five storey
5.3.1 Upto 45 cm length and all sides are free Cum 327.00
5.3.2 Upto 45 cm length and two corners are free Cum 163.00
5.3.3 Upto 90 cm length and all sides are free Cum 278.00
5.3.4 Circular Pillars Cum. 331.00
5.4 Brick work in plain arches in super structure upto five storey Cum. 6762.00
in cement mortar 1 : 3 including centering and shuttering
complete span upto 6 Mtr. with Brick of class designation 75.
5.5 Brick work in gauged arches in super structure upto five storey Cum. 8015.00
in cement mortar 1 : 3 including centering and shuttering
complete span upto 6 meter with Brick of class designation 75.
5.6 Add extra for additional cost of centering for arches Cum 314.00
exceeding 6m span including all shuttering , bolting wedging
and removal.(Area of the soffit to be measured)
BSR_B5 [65]
Chapter
Code No
1 2 3 4
5.7 Half brick masonry in foundation & plinth using bricks of
designation 75
5.7.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand) Sqm. 525.00

5.8 Half brick masonry in Superstructure , above plinth level upto

floor V level using bricks of designation 75
5.9 Add extra providing and placing in position 2 Nos. ,6mm Ø Sqm 64.00
M.S. bar at every third course of half brick masonry .
5.10 Brick work in partition in super structure upto five storey 7cm.
thick (brick on edges) using bricks of class designation 75 in :

5.11 Honey comb brick work half brick thick with bricks of
class designation 75 upto five storey in:
5.11.2 Cement mortar1 : 6(1 cement : 6 coarse sand Sqm. 342.00
5.12 Add extra over for laying brick work in or under water and or P.Cum. 293.00
P.-
liquid mud including cost of pumping of or bailing out water
Mtr.
and removal of slush etc. complete. depth
Note : The quantity will be calculated by multiplying the depth
measured from the sub-soil water level up to centre of gravity
of concrete under sub-soil water level with quantity of
concrete in cum executed under sub-soil water. The depth of
centre of gravity shall be reckoned correct to 0.1 m; 0.05 m or
more shall be taken as 0.1 m and less than 0.05 m ignored.
5.13 Add extra for laying bricks work in or under foul condition. Cum. 119.00
BSR_B5 [66]
Chapter
Code No
1 2 3 4
5.14 Brick work in super structure upto five storey with selected Cum 5055.00
bricks of class designation 75 in exposed brick work including
making horizontal and vertical grooves 10mm. wide 12mm.
deep complete in cement mortar 1:6.
5.15 Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of
class designation 75 in superstructure above plinth level upto
floor five level in :
5.15.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Cum 5038.00
5.16 Brick work with mechanised autoclaved flyash lime bricks

conforming to IS: 12894 :2002 of class designation 100 in
superstructure above plinth level upto floor V level in.
5.17 Add extra for brick work in superstructure above floor five
level, for each four floors or part thereof.
5.17.1 Quantity in Cum. Cum. 260.00
5.17.2 Quantity in Sqm. Sqm. 23.00
5.18 Add extra over item of brick work with class designation 100
in substitution of class designation 75 :
5.18.1 Quantity in Cum. Cum. 163.00
5.18.2 Quantity in Sqm. Sqm. 19.00
5.19 Half Brick work with mechanised autoclaved flyash lime

bricks conforming to IS: 12894 :2002 of class designation 100
in superstructure above plinth level upto floor V level in.
5.19.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 586.00
5.20 Half Brick work with mechanised autoclaved flyash lime

bricks conforming to IS: 12894 :2002 of class designation 75
in superstructure above plinth level upto floor V level in.
BSR_B5 [67]
Chapter
Code No
1 2 3 4
5.21.1 Providing and laying Autoclaved Aerated Concrete (AAC) Cum. 5404.00
blocks masonary 100mm/125mm thick with Grade-I AAC
blocks of density 551 to 650 kg/cum conforming to IS : 2185
(Part-3) in superstructure above plinth level upto floor V level
in cement mortar 1:4 (1 cement : 4 coarse sand). The rate
includes providing and placing in position 2 Nos. 6 mm dia
MS bars at every third course of masonary work.
5.21.2 Providing and laying Autoclaved Aerated Concrete (AAC) Cum. 4752.00
blocks masonary 150mm/230mm/300mm thick with Grade-I
AAC blocks in superstructure above plinth level upto floor V
level with RCC band at sill level and lintel level with approved
block laying polymer modified adhesive mortar all complete as
per direction of Engineer-in-charge. (The payment of RCC
band and reinforcement shall be made for seperately).
5.21.3 Add extra for AAC block masonary work in superstructure Cum. 260.00
above floor five level, for each four floors or part thereof.
BSR_B5 [68]
CHAPTER B-6
STONE MASONRY
Note :
1 Rates provided are for the complete finished items inclusive of
cost of water and materials with all leads labour, all type of
taxes, royalty, scaffolding, curing, laying, fixing finishing etc.,
hire charges for tools and plants, templates and other
appliances, required for the purpose of execution of the items
work as per specification.
2 In case of non-availability of stone header of proper size

cement concrete header of mix 1:3 : 6 (M-100) with 25mm
graded stone aggregate with smooth finish may be provided by
the contractor at no extra cost.
Chapter
Code No
1 2 3 4
6.1 Random Rubble stone masonry for with hard stone in

foundation and plinth in Cement Sand mortar above 30 CM
thick wall in:
6.1.1 Mud Mortar. Cum. 1850.00
6.1.2 Dry Masonry. Cum. 1744.00
6.1.3 Cement Mortar 1:3 ( 1-Cement : 3-Sand). Cum. 3528.00
6.2 Random Rubble stone masonry with hard stone in

superstructure above plinth level and upto five level above
30cm. thick walls in :
6.2.1 Mud Mortar. Cum. 2490.00
6.2.2 Dry Masonry. Cum. 2385.00
6.3 Add extra for Random Rubble stone masonry with hard stone
in
6.3.1 Square or Rectangular pillars Cum. 173.00
6.3.2 Circular pillars Cum. 519.00
6.3.3 Wall curved in plan to mean radius not exceeding 6 Mtr. Cum 319.00
6.3.4 Wall upto 30cm. and less thickness. Cum 186.00
BSR_B6 [69]
Chapter
Code No
1 2 3 4
6.4 Add extra for facing as per design and detailed specifications
including additional cost of stones
6.4.1 Course rubble facing First sort. Sqm 618.00
6.4.2 Course rubble facing Second sort. Sqm 491.00
6.4.3 Ashlar fine tooled facing. Sqm 666.00
6.4.4 Ashlar rough tooled facing. Sqm. 381.00
6.4.5 Ashlar pitched facing. Sqm. 336.00
6.4.6 Add extra for rock facing using Jodhpur white sand stone with Sqm. 290.00
porper projection and chiesel dressing of edges of stone 2 line
dressing for building corners,jambs including uniform joints.
6.5 Extra for stone masory work,above floor V level for every four Cum 545.00
floors or part thereof.
6.6 Extra for laying stone work in or under water and/or liquid Cum/ 307.00
mud including cost of pumping or bailing out water and P Mt
removing slush etc. complete. depth
6.7 Extra for laying stone work in or under foul position. Cum 124.00
Note :- Recover cost of useful stone @ 2/3rd of masonry work Cum 575.00
dismantaled quantity.
6.8 Stone work (machine cut edges) for Wall cladding/ Veneering
work up to 10m height with 20 to 30 mm thick Red Sand
Stone (Karauli ) and backing filled with a grout of 12mm thick
cement mortar 1:3 (1 cement : 3 coarse sand) including
pointing in white cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment matching the stone shade
:(To be secured to the backing by means of cramps which shall
be paid separately)
6.8.1 Exposed face rough dressed Sqm. 1814.00
6.8.2 Exposed face machine cut Sqm. 2500.00
BSR_B6 [70]
Chapter
Code No
1 2 3 4
6.9 Stone work (machine cut edges) for Wall cladding/ Veneering
work up to 10 m height with 20 to 30 mm thick Pink Sand
stone (Bansi Paharpur) and backing filled with a grout of
12mm thick cement mortar 1:3 (1 cement : 3 coarse sand)
including pointing in white cement mortar 1:2 (1 white cement
: 2 stone dust) with an admixture of pigment matching the
stone shade : (To be secured to the backing by means of
cramps which shall be paid separately)
6.9.2 Exposed face Machine cut Sqm. 2536.00
6.10 Wall lining butch work upto 10m height with Red/ Pink Sand
stone 20 to 30 mm thick (machine cut edges) stone strips of
minimum length 300 mm and required width including
embedding every tenth layer and bottom most layer in masonry
or concrte after making necessary chases of size 75x75 mm
and by providing layer of 75 mm thick strips i/c 12 mm thick
bed of cement mortar 1 : 3 (1 cement : 3 Coarse sand) i/c ruled
pointing in cement mortar 1 :2 ( 1 white cement : 2 stone dust)
with an admixture of pigment to match the shade of stone
complete as per direction of Engineer in Charge.
6.10.2 Exposed face machine cut Sqm. 1455.00
6.11 Providing and fixing stainless steel cramps of required size Kg 707.00
and shape for anchoring stone wall lining to the backing or
securing adjacent stones in stone wall lining in cement mortar
1:2 (1 cement : 2 coarse sand) including making the necessary
chases in stone and holes in walls wherever required.
6.12 Providing and fixing stone dowels 10x5x2.50 cm cut to double Each 26.00
wedge shape as per design in cement mortar 1:2 (1 cement : 2
coarse sand) including making the necessary chases.
6.13 Providing and fixing copper pins 7.5 cm long 6 mm diameter Each 26.00
for securing adjacent stones in stone wall lining in cement
mortar 1:2 (1 cement : 2 coarse sand) including making the
necessary chases.
6.14 Extra for stone work for wall lining on exterior walls of height Sqm. 64.00
more than 10 m from ground level for every additional height
of 3 m or part there of.
BSR_B6 [71]
Chapter
Code No
1 2 3 4
6.15 Providing and fixing horizontal chajja of Red/ White sand Sqm. 883.00
stone 40 mm thick and upto 80 cm projection in cement mortar
1:4 (1 cement : 4 coarse sand) including pointing in white
cement mortar 1:2 (1 white cement : 2 stone dust) with an
admixture of pigment matching the stone shade.
6.16 Providing dab stone over Chajjas duly fixed in cement sand
mortar 1:6 complete :
6.16.1 80mm thick. Sqm. 921.00
6.16.2 50mm thick. Sqm. 825.00
6.17 Supplying and fixing in walls machine cut and polished stone
shelves, tands and in CM 1:3 with machine cut edges :
6.17.1 Sand or other approved stone 25mm thick. Sqm. 504.00
6.17.2 Sand or other approved stone 50mm thick. Sqm. 673.00
6.17.3 Kota stone minimum 30mm thick. Sqm. 609.00
6.18 Supplying and fixing stone lintels/bed plates of approved

quarry rough dressed in cement mortar 1:4 :
6.18.1 Upto 15 cm. thick. Cum 9621.00
6.18.2 Above 15 cm. thick. Cum 9162.00
6.19 Supplying and fixing machine cut fine dressed Red/Pink sand
stone dasa or coping, with full moulding if required laid on
cement mortar 1:4 including pointing with admixture of
pigment matching with the stone shade.
6.19.1 25 mm thick Sqm. 1243.00
6.19.2 50 mm thick Sqm. 1458.00
6.19.3 75 mm thick Sqm. 1664.00
6.20 Supplying and fixing machine cut dressed 75 mm Pink sand Sqm. 5309.00
stone (Bansi Paharpur) dasa/ coping wth ornamental shape
having moulding and "PAN Shape" engraving as per required
pattern with engraving depth of 5 mm (average) in single piece
of length 90 cm to be laid on cement mortar 1:4 (12 to 20mm
thick) including pointing with admixture of pigment matching
with the stone shade.
6.21 Providing and fixing Stone jali 40mm thick Red/Pink sand Sqm. 7851.00
stone throughout in cement mortar 1:3 (1 cement : 3 coarse
sand) including pointing in white cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of pigment, matching
the stone shade, jali patterns to be cut square to jali slab
without any chamfers etc:
BSR_B6 [72]
Chapter
Code No
1 2 3 4
6.22 Providing and fixing Stone jali 50mm thick Red/Pink sand Sqm. 8813.00
stone as per ornamental design to fixed with white
cement/epoxy mortar including pointing in white cement
mortar 1:2 (1 white cement : 2 stone dust) with an admixture
of pigment, matching the stone shade.
6.23 Providing and fixing Red/Pink sand stone post (Mataga) Each 800.00
having size 100x100mm heights 600 to 750 mm as per
ornamental design such as like flower octonogal head border
etc. to fixed with white cement/epoxy mortar including
pointing in white cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment, matching the stone shade.
6.24 Providing and fixing ornamental/aesthetic look cement Sqm 982.00

concerte claddings/ veneers up to 100 mm with, over a base of
cement Plaster 1:4, 20 mm thick including cement pointing 1:2
with an admixture of pigment to match the shades of veneer
upto 4:5 mtr. Height above plinth level.
ARCH MASONRY
6.25 Stone masonary for arches in cement sand mortar 1:3
including centering shuttering and pointing etc. up to 4.5 Mtr.
height from plinth level:
6.25.1 With hammer dressed stone (to be plastered). Cum 8114.00
6.25.2 With coursed rubble stone (to be pointed). Cum 9060.00
6.25.3 Block-in-Course chisel dressed, arch span up to 1.5 Mtr. Cum 11963.00
6.25.4 Block-in-Course chisel dressed, arch span above 1.5 Mtr. Cum 12528.00
6.25.5 Cut stone fine dressed with fine joints, arch span up to 1.5 Cum 14819.00
Mtr.
6.25.6 Cut stone fine dressed with fine joints, arch span above 1.5 Cum 13815.00
Mtr.
6.25.7 Relieving arch stone masonary. Cum 6000.00
6.25.8 Extra over item No. 6.25 for dome masonary. Shuttering and Cum 1966.00
Form work if required to be paid separately.
BSR_B6 [73]
Chapter
Code No
1 2 3 4
ASHLAR-STONE WORK
6.26 Supplying and fixing ashlar sills, jambs, skirting, steps etc.
rough dressed:
6.26.1 (A) Upto 15 cm thick Soorsagar or eqvt. White Ashlar Cum 25952.00
(B) Upto 15 cm thick Red Ashlar Cum 17161.00
6.26.2 Above 15 cm. and upto 20 cm. thick

(A) Red Ashlar Cum 17291.00
(B) Soorsagar or eqvt. White Ashlar Cum 26082.00
6.26.3 Above 20 cm. thick & upto 2.15 m length (Pats.)

6.26.4 Above 20 cm. thick & above 2.15 m. length

6.27 Supplying and fixing Soorsagar Bhura or Equivalent ashlar

sills, lintels and dassa, bearing, bed & top surface made
perfenctly even, jambs, skirting steps etc. rough dressed:
6.27.1 Upto 15 cm. thick Cum 5019.00
6.27.2 Above 15 cm. and upto 20 cm. thick Cum 5149.00
6.27.3 Above 20 cm. thick (pats) & upto 2.15 m length Cum 5312.00
6.27.4 Above 20 cm. thick (pats) & above 2.15 m length Cum 5507.00
6.28 Supply and fixing ashlar lintels and Dassa exposed horizontal
and vertical faces 3 - lines fine dressed (bearing bed & top
surface made perfectly even)
6.28.1 (a) upto 15 cm thick Red Ashlar Cum 18369.00
(b) upto 15 cm thick White Ashlar Cum 26722.00
6.28.2 Above 15 cm. and upto 20 cm. thick

(a) Soorsagar or eqvt. White Ashlar Cum 26992.00
(b) Red Ashlar Cum 18579.00
6.28.3 Above 20 cm. thick & upto 2.15 m length (Pats.)

6.28.4 Above 20 cm. thick & above 2.15 m length

BSR_B6 [74]
Chapter
Code No
1 2 3 4
6.29 Supplying and fixing ashlar solid block pillars fully fine (3
lines) dressed
(b) Red Stone Cum 27662.00
6.30 Supplying and fixing ashlar stone arches fuly fine (3 lines)
dressed for 1.5 to 5m. Span (Net content payable)
(b) Red Stone Ashlar Cum 23112.00
6.31 Supplying and fixing ashlar face stone 10 cm thick fine (3

lines) dressed
(b) Red Ashlar Sqm 5006.00
6.32 Supplying and fixing ashlar coping ordinary 7 to 10 cm. thick

2-line dressed (normal length of single piece not less than
0.90m)
(a) Soorsagar or eqvt. White Ashlar Sqm 8348.00
6.33 Supplying and fixing ashlar coping moulded and counter

slopped 7 to 10 cm. thick (2 line dressed) (normal length of
single piece not less than 0.90m)
(a) Soorsagar or eqvt. White Ashlar Sqm 9028.00
6.34 Supplying and fixing in cement sand mortar 1:4 sand or other P. Cum 11004.00
approved stone dassa or coping of thickness 75 to 100 mm
(fine dressed) : Plain ornamental/Jhalar coping (face area
measured)
6.35 Supplying and fixing ashlar shrivan (Kharpa grooved) rough Cum 16279.00
dressed (normal length of single piece not less than 0.90m)
6.36 Fine dressing of ashlar stone work (payable on Executive

Engineer's test checking):
6.36.1 (A) White Ashlar three line Sqm 1952.00
(B) Red Ashlar three line Sqm 929.00
6.36.2 (A) White Ashlar two line Sqm 1215.00

(B) Red Ashlar two line Sqm 739.00
6.36.3 (A) White Ashlar one line Sqm 988.00

(B) Red Ashlar one line Sqm 441.00
BSR_B6 [75]
Chapter
Code No
1 2 3 4
6.37 Rough dressing ashlar stone work (payable only for

departmental work).
(A) Soorsagar or eqvt. White Ashlar Sqm 226.00
(B) Red Ashlar Sqm 154.00
6.38 Supplying and fixing ashlar cantilever steps fine (3 lines)

dressed (triangular exposed surface is to be measured)
(A) Soorsagar or eqvt. White Ashlar Cum 100886.00
(B) Red Ashlar Cum 93386.00
6.39 Supplying and fixing ashlar cantilever steps fine (2 lines)

dressed (triangular exposed surface is to be measured)
6.40 Deduct if the shape of cantilever and landing steps is

rectangular
6.40.1 Form item No. 6.37
6.40.2 Form item No. 6.38

6.41 Supplying and fixing ashlar rain water spouts fine (3 lines)
dressed as per approved design of size :
6.41.1 (A) Red Ashlar 60x26x18 cm Each 571.00
(B) White Ashlar 60x26x18 cm Each 1135.00
6.41.2 (A) White Ashlar 60x30x25 cm Each 1457.00

(B) Red Ashlar 60x30x25 cm Each 744.00
6.42 Supplying and fixing ashlar stone chhajja 5 to 7 cm. thick all
exposed surface fully fine dressed, weather dripped includin
75x75mm. Cement batta (1:2:4) between chhajja & wall
(single piece upto 1:2m length) :
6.42.1 (A) Red Ashlar three line dressed Sqm 1247.00
(B) White Ashlar three line dressed Sqm 1707.00
6.42.2 (A) Red Ashlar two line dressed Sqm 1057.00
(B) White Ashlar two line dressed Sqm 970.00
6.42.3 (A) Red Ashlar one line dressed Sqm 759.00

(B) White Ashlar one line dressed Sqm 743.00
BSR_B6 [76]
Chapter
Code No
1 2 3 4
6.43 Supplying and fixing Red ashlar railing ordinary with takia
and thambli complete fine dressed
6.43.1 Red Ashlar three line dressed Sqm 1296.00
6.43.2 Red Ashlar two line dressed Sqm 1106.00
6.43.3 Red Ashlar one line dressed Sqm 808.00
6.44 Supplying and fixing Red ashlar stone Jali 5 to 7 cm. thick
curved
6.44.1 Red Ashlar upto half depth Sqm 1839.00
6.44.2 Red Ashlar upto full depth Sqm 2313.00
6.45 Re-fixing old ashlar stone w/o dressing

(A) White Ashlar Cum 427.00
6.46 Re-fixing of old stone slab

(A) White Ashlar Sqm 126.00
(B) Red Ashlar Sqm 108.00
6.47 Supply & fixing Red Ashlar shelves 5 to 7 cm. thick exposed Sqm 284.00
surface rough dressed
6.48 Supply and fixing Red Ashlar shelves 5 to 7 cm. thick exposed Sqm 778.00
surface fine (3 lines) dressed
6.49 Red ashlar todies for verandah (pillar and pat) fine (3 lines Sqm 1449.00
dressed)
6.50 Supply and fixing Red Ashlar todies for chhajjas and shelves Sqm 855.00
fine (3 lines) dressed 30x30x10cm.
6.51 Supply and fixing chittar or equivalent stone slab perchits with
making edges and top surface level in cement mortar 1:3
complete finished
6.51.1 Upto 2.15m span
Soorsagar or eqvt. White Ashlar Sqm 674.00
6.51.2 Add extra for span more than 2.15m span

Soorsagar or eqvt. White Ashlar Sqm 55.00
6.52 Supply and fixing 7 to 10 cm. Soorsagar or equivalent stone Sqm 344.00
chaps in lime mortar or gypsum rough dressed more than 0.60
m. length
BSR_B6 [77]
Chapter
Code No
1 2 3 4
6.53 Supply and fixing 2.5 to 5 cm thick Darba Darbi wall of red Sqm 430.00
(Ros) stone rough dressed fixed in lime mortar or gypsum
6.54 Supply and fixing soorsagar or equivalent white stone slab Sqm 3439.00
steps 75 to 100 mm thick fine (3 lines) dressed for tread &
riser upto 2m. Length, simply supported or centrally fixed with
both ends free (projection to be paid only)
6.55 Deduct if soorsagar or equivalent Bhura Ashlar stone is used Sqm 421.00
in place of white ashlar.
Ornamental work (as per existing pattern of Umed Hospital,
M.G. Hospital or Rajasthan High Court Building at Jodhpur)
6.56 Supplying and fixing soorsagar or equivalent 35 cm. height Mtr. 732.00
ashlar face (3 line) fine dressin with 3.5 cm. gola/groove
complete including cutting and moulding (excluding supply of
Ashlar and fixing).
6.57 Supplying and fixing 13 cm thick soorsagar face stone over Mtr. 1435.00
vent lintel complete including cutting & moulding (3 line fine
dressed)
6.58 Supplying and fixing 7 to 8 cm thick soorsagar stone chajja in Sqm 3994.00
slope (3 lines fine dressed)including cutting & moulding
weather dripped (both sides dressed)
6.59 Supplying and fixing 7 to 8 cm thick soorsagar stone chajja

outer and inner corner complete 3 lines fine dressed including
cutting & moulding weather dripped (both sides dressed)
(A) For white Ashlar stone outer corner Each 1686.00
(B) For white Ashlar stone Inner corner Each 840.00
6.60 Supplying and fixing 17 cm thick soorsagar dab stone (face 3 Mtr. 1832.00
line dressed) including cutting and moulding
6.61 Supplying and fixing Flat rain water spouts 25 Cm. Wide in Each 1660.00
Soorsagar stone clopped chhajja including cutting &
moulding.
6.62 Supplying and fixing red Ashlar 17 cm thick ventsill with Mtr. 2656.00
required slope (face & sill 3 line dressed) complete including
cutting and moulding
BSR_B6 [78]
Chapter
Code No
1 2 3 4
6.63 Supplying and fixing red Ashlar 17 cm thick exposed width Mtr. 2689.00
todies under slopped Chajja with alternate projection and
cutting complete including cutting & moulding.
6.64 Supplying and fixing red Ashlar 17 cm thick exposed width Each 2521.00
todies under slopped Chajja F.F. type design 22x22 cm
projection (all 0.60 x 0.95 x 0.25 m)
6.65 Supplying and fixing 22 cm. Thick red Ashlar bed (pillar cap) Each 5047.00
45 cm wide X 135 cm long (3 line dressed) all exposed side
complete including cutting, moulding and chamffering etc.
6.66 Supplying and fixing white soorsagar stone coping 13 Cm Sqm 4832.00
thick & 45 cm wide with 3 set back groove & one projection
with sloped tope edge including cutting, moulding and
chamffering etc.
6.67 Labour charges for Animar dressing (old M.G.H. pattern) over Sqm 848.00
Soorsagar or equivalent white Ashlar over already two line
dressed surface by using special tools i.e. toothed chisel etc.
6.68 Labour charges for soorsagar or equivalent white Ashlar stone Mtr. 1111.00
cornice of approved shape and design 18 cm. thick 38 to 40
cm. wide and Animar dressing of M.G.H. pattern (including
cutting and moulding).
6.69 Labour charges for providing 8 to 10 cm. Gola with animar Mtr. 496.00
dressing as per old M.G.H. pattern on white Ashlar
6.70 Labour charges for soorsagar or equivalent white Ashlar stone Mtr. 966.00
coping 15 Cm. thick with cutting, moulding and dressing as
per old M.G.H. pattern
6.71 Labour charges for fixing of stone chhajja and making good
the same (exposed surface to be measured.
(A) Red Ashlar Sqm 263.00
(B) White Ashlar Sqm 266.00
BSR_B6 [79]
Chapter
Code No
1 2 3 4
6.72 Supplying and fixing stone liri in CM 1:4 work facing with
proper projection and chiesel dressing of edges of stone two
line dressing of building corners, jambs etc. including uniform
joints using aluminium square section of size 12 mm to 15 mm
as per requirement of course and width of stone not less than
12 Cm., with requisite number headers (minimum length of
stone 0.9 M) 6 cm. to 9 Cm. thick.
(i) 6 cm. to 9 Cm. thick including finsing face joint with white Per Sqm. 1981.00
cement moartar and matching pigment.
(ii) Add extra for 7 to 10 cm. thick courses. Sqm 324.00
(iii) 14 cm (5.5") thick including finising face joint with white Per Sqm. 2167.00
cement moartar and matching pigment.
6.73 Stone masonary 7 to 15 Cm. thick cladding in cement sand Mtr. 179.00
mortr 1:6 with C.R. First Sort facing and rock facing complete
on R.C.C. or C.C. works up to 15 to 20 cm. height.
6.74 Add extra for two line horizontal edges (Patti) dressing of Mtr. 59.00
course Khandas
6.75 Providing and fixing of machine cut Soorsagar white stone Sqm 2092.00
pavement size 600x600 mm and 50 to 75 mm thick over 20
mm thick base cement sand mortar 1:6 be placed at 50-60 mm
interval as per existing pavement design. (used single piece 60
cm x 60 cm.)
6.76 S&F 50 to 75 mm thick fine dressed and machine grained Sqm 2178.00
surface white Soorsgar stone partition in cement mortar 1:6
with joint finish flush pointing with white cement sand mortar
1:3 with colour pigment of approved shade as per existing
shop & as per direction of Engineer-in-charge.
6.77 S&F white ashlar stone machine cut Kangura as per approved Mtr. 796.00
design 5 cm to 7 cm thick and top portion half round up to 10-
12 cm height. Both machine cut finished including excavation
of earth work and fixing in cement sand mortar 1:6 as per
direction of Engineer incharge complete in all respect size 35
cm wide 5/7 cm thick with all taxes.
6.78 P&F white ashlar Todies of machine cut for chhajja of porch Each 1050.00
fixing in cement mortar of gypsum etc. complete in all respect
size 30x30x10 cm.
BSR_B6 [80]
Chapter
Code No
1 2 3 4
6.79 P&F white ashlar Todies of machine cut for corners of porch Each 1224.00
fixing in cement mortar or gypsum etc. complete in all respect
size 45x30x10 cm.
6.80 Supply & fixing or equivelent white ashlar stone archess fully Each 9724.00
fine fine (3 line) dressed 0.90 M (3' span)
fine fine (3 line) dressed 1.20 M (4' span) finished.
6.85 Providing & Installation of White ashlar stone Carved Rm 8077.00

perforated Jali 50 to 70mm thick with height 600mm and
length not exceeding 1250mm with pillar 900mm long with
groove cutting etc. complete as per direction of Engineer-in-
charge (excluding cost of providing & fixing dassa).
6.86 Supplying and fixing stone liri in CM 1:4 work facing with Sqm 2081.00
proper projection and chiesel dressing of edges of stone two
line dressing of building corners, jambs etc. including uniform
joints using aluminium square section of size 12 mm to 15 mm
as per requirement of course and width of stone not less than
12 Cm., with requisite humber headers (minimum length of
stone 0.9 M) 14 cm (5.5")thick.
6.87 Supplying and fixing Jodhpur machine cut stone Kadau in CM

1:4 with rock facing with proper projection and machine cut
edges of stone, two line dressing of building corners, jambs
etc. including uniform joints using aluminium square section
of size 12 mm to 15 mm as per requirement of course and
width of stone not less than 12 Cm., with reqisite humber
headers (minimum length of sotne 0.9 M)
(i) 29cm (11.5")hight Per Sqm. 3259.00
(ii) 19cm (7.5")hight Per Sqm. 2880.00
BSR_B6 [81]
Chapter
Code No
1 2 3 4
6.88 Supply and fixing Jodhpur sand stone Machine cut Dash,
Coping,sill,lintel fixed in cement sand mortar 1:4.
(i) 15 cm (6") thick Per Sqm. 2923.00
(ii) 9 cm (3.5") thick Per Sqm. 2081.00
(iii) 5 cm (2") thick Per Sqm. 2167.00
(iv) 3.5 cm (1.5") thick Per Sqm. 1984.00
6.89 Supply and fixing Jodhpur sand stone Machine cut Kerb stone Rm. 857.00
(10cm wide 40 cm. height) fixed in white cement sand mortar
1:4 with pigment including EarthWork.
6.90 Supply and fixing Jodhpur sand stone Machine cut Nali fixed
in white cement sand mortar 1:4 with pigment including E/W
(A) Single nali 55 cm wide 40 cm hight Rm. 3421.00
(B) Double nali 85 cm wide 40 cm hight Rm. 4312.00
6.91 Add extra for facing with white ashlar stone three line dressed Sqm 4350.00
of size 300x300mm with min. thickness of 125mm, including
all four edge are chamfered cut 12mm x 12mm with 3 line
dressing, every fifth stone header with thickness min.300
mm,including additional cost of stone as per drawing or as
approved by Engineer In Charge, Complete with all respect .
6.92 Fine dressed stone flooring over 20 mm (average) thick base

of cement mortar 1:4 ( 1cement : 4 coarse sand) with joints
2
finished flush. Red Sand stone size not less than 1350 Cm ,
a) 40mm Sqm 1244.00
b) 50mm Sqm 1392.00
c) 75mm Sqm 1685.00
6.93 Fine dressed stone flooring over 20 mm (average) thick base

of cement mortar 1:4 ( 1cement : 4 coarse sand) with joints
finished flush. White Sand stone size not less than 1350 Cm2,
a) 40mm Sqm 1392.00
b) 50mm Sqm 1538.00
c) 75mm Sqm 1831.00
6.94 Chiesel dressing of machine cut Jodhpur ashlar stone. Sqm 517.00
BSR_B6 [82]
CHAPTER : B - 7
MARBLE, GRANITE AND TILE WORKS
Chapter
Code No
1 2 3 4
7.1 Providing and fixing Marble stone flooring table rubbed, 15-
18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement
: 4 coarse sand) jointing with white cement mortar 1:2 (1 white
cement : 2 marble dust) with pigment to match the shade of the
marble slab including grinding, rubbing and polishing
complete.
OR
Providing and fixing stone slabs table rubbed, 15-18 mm thick
in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc.
laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse
sand) jointing with white cement mortar 1:2 (1white cement :
2 marble dust) with pigment to match the shade of the marble
slab including grinding, rubbing and polishing complete.
7.1 Makrana 'Adanga'.

7.1.1 Upto to 1500 Cm2 Tiles Sqm. 1164.00
7.1.2 2 2 Sqm. 1350.00
1501 Cm to 3600 Cm Tiles
7.1.3 Above 3601 Cm2 Slabs Sqm. 1674.00
7.2 Rajnagar 1st quality/Ageria with light spots.

7.2.1 Up to 1500 Cm2 Tiles Sqm. 1044.00
7.2.2 2 2 Sqm. 1157.00
7.2.3 2 Sqm. 1305.00
Above 3601 Cm Slabs
7.3 Keseriaji/ Abu Ambaji (Green Marble)

7.3.1 Up to 1500 Cm2 Tiles Sqm. 1084.00
7.3.2 2 2 Sqm. 1268.00
7.3.3 Above 3601 Cm2 Slabs Sqm. 1674.00
7.4 Bhaislana,Abu,Kishangarh Zebra (Black Marble)

7.4.1 up to 1500 Cm2 Tiles Sqm. 1029.00
7.4.2 2 2 Sqm. 1120.00
7.4.3 2 Sqm. 1361.00
Above 3601 Cm Slabs
BSR_B7 [83]
Chapter
Code No
1 2 3 4
7.5 Providing and fixing Granite stone slab mirror polished and
machine edge cut in walls, pillars, steps, Shelves, Sills
Counters, Floors etc. laid on 12mm (Av.) thick base of cement
mortar 1:3 (1 cement : 3 coarse sand) jointing with white
cement mortar 1:2 (1white cement : 2 marble dust) with
pigment to match the shade of the marble slab including
grinding, rubbing and polishing complete.
7.5.1 Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour)

(i) Up to 1500 Cm2 Tiles Sqm. 1993.00
(ii) 2 2 Sqm. 2818.00
(iii) 2 Sqm. 3028.00
Above 3601 Cm Slabs
7.5.2 South (Red)

(ii) 1501 Cm2 to 3600 Cm2 Tiles Sqm. 2944.00
(iii) 2 Sqm. 3434.00
Above 3601 Cm Slabs
7.5.3 South Zed Black

(ii) 2 2 Sqm. 3176.00
(iii) 2 Sqm. 4076.00
Above 3601 Cm Slabs
7.5.4 Good quality South Black

(i) 2 Sqm. 2310.00
Up to 1500 Cm Tiles
(ii) 1501 Cm2 to 3600 Cm2 Tiles Sqm. 2952.00
(iii) 2 Sqm. 3850.00
Above 3601 Cm Slabs
7.5.5 Jalore (P-white / S-white/ Rosy Pink colour)

(ii) 2 2 Sqm. 2400.00
(iii) 2 Sqm. 2750.00
Above 3601 Cm Slabs
7.5.6 Rajasthan Black

(ii) 2 2 Sqm. 2600.00
(iii) 2 Sqm. 3100.00
Above 3601 Cm Slabs
BSR_B7 [84]
Chapter
Code No
1 2 3 4
7.6 Extra for providing edge moulding to 15-18mm thick marble/

Granite/Kota stone counters, Vanities etc. including machine
polishing to edge to give high gloss finish etc. complete as per
design approved by Engineer-in-Charge.
7.6.1 Marble work
(i) Full Edge moulding Mtr. 146.00
(ii) Half Edge moulding Mtr. 88.00
7.6.2 Granite/Kota Stone Work

(i) Full Edge moulding Mtr. 233.00
(ii) Half Edge moulding Mtr. 143.00
7.7 Extra for fixing marble /granite stone over and above Mtr. 24.00
corresponding basic item, in facia and drops of width upto 150
mm with epoxy resin based adhesive including cleaning etc.
complete
7.8 Extra for providing opening of required size & shape for wash Each 256.00
basins/ kitchen sink in kitchen platform, vanity counters and Opening
similar location in marble/Granite/stone work including
necessary holes for pillar taps etc. including rubbing and
polishing of cut edges etc. complete
7.9 Extra for Mirror polishing on marble work where ever Sqm. 102.00
required to give high gloss finish complete.
7.10 Extra in marble/other flooring work for upto 50 mm wide strip Rm 52.00
of Green/White/ Jaisalmer stone in flooring work as per
direction of Engineer in Charge
7.11 Providing and fixing cramps of required size & shape in RCC/
CC backing with cement mortar 1:2 ( 1 cement :2 coarse sand)
including drilling necessary hole in stones and embedding the
cramp in the hole .
7.11.1 Gun Metal cramp Kg 642.00
7.11.2 Stainless steel cramps Kg 611.00
BSR_B7 [85]
Chapter
Code No
1 2 3 4
7.12 Providing and fixing 1st quality standard white, grey, ivory, Sqm. 674.00
fume red brown, light green, light blue and other light shades
glazed tiles confirming to IS : 13753 & IS :15622 of size
200mm x 300mm in walls, floors, steps, pillars etc. laid on a
bed of neat cement slurry finished with flush pointing in the
white cement mixed with pigment to match the shade of the
tile complete (excluding the cost of cement plaster on walls
and pillar).
7.13 Providing and fixing 1st quality MAT finished ceremic tile Sqm. 748.00
size 300x300mm confirming to IS : 13755 and IS : 15622
colour such as white, grey, ivory, fume red brown, light green,
light blue and other light shades in floors, steps, pillars etc.
laid on a bed of neat cement slurry finished with flush pointing
in the white cement mixed with pigment to match the shade of
the tile complete (including the cost of cement mortar bed
1:4).
7.14 Extra for using Marble printed / Granite shade or dark Sqm 10%
shade tiles instead of white, grey, ivory, fume red brown,
light green, light blue and other light shades in glazed
tiles and MAT finished tiles.
7.15 Extra for using size above 200x300mm in glazed tiles and Sqm 10%
for using 400mm x 400mm MAT finished tiles in place of
300mm x 300mm size.
7.16 Providing and fixing 75 mm wide Decorative Border in Rmt. 329.00

different shades and in all coloures in glazed tiles laid
over 12 mm thick bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement slurry @ 3.3 kg per
sqm including pointing in white mixed with pigment of
matching shade complete.
7.17 Providing and fixing Motive pieces all colours for glazed
tiles laid over 12 mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with grey cement slurry
@ 3.3 kg per sqm including pointing in white mixed with
pigment of matching shade complete..
7.17.1 Size 200 x 200mm Each 130.00
7.17.2 Size 200 x 300mm Each 155.00
7.17.3 Size 300 x 300mm Each 219.00
7.17.4 Size 300 x 450mm Each 250.00
7.17.5 Size 300 x 600mm Each 281.00
BSR_B7 [86]
Chapter
Code No
1 2 3 4
7.18 P & F 1st qualityVitrified Porcelain Polished tiles on floor,

skirting and steps etc.in different sizes (thickness to be
specified by manufactuer) with water absortion less than
0.08% and conforming to IS 15622 of approved make in all
colour and shade, laid with 20 mm thick CM 1 : 4 including
grounting the joints with white cement and matching pigment
etc complete.
7.18.1 size 450 mm X 450 mm Sqm 789.00
7.18.2 size 600 mm X 600 mm Sqm 911.00
7.18.3 size 800mm X 800 mm Sqm 1100.00
7.19 Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with Sqm 128.00
cement based high polymer modified quick-set tile adhesive
(Water based) conforming to IS: 15477 , using 5kg. adhesive
per sqm of tile area, in average 3mm thickness instead of
cement mortar.
7.20 Providing and fixing 1st quality standard white, grey, ivory,
ceramic glazed vitrified tiles with water absortion less than or
equal to 0.08% confirming to IS:13753 & IS : 15622 on walls,
pillars etc. laid on a bed of neat cement slurry finished with
flush pointing in the white cement mixed with pigment to
match the shade of the tile complete (excluding the cost of
cement plaster on walls and pillar).
7.20.1 Size 600mm x 1200mm Sqm 1463.00
7.20.2 Size 800mm x 1200mm Sqm 1825.00
7.20.3 Size 196mm x 1215mm Sqm 1824.00
7.21 Providing and fixing 1st quality MAT & GLOSSY finished
ceramic tile confirming to IS : 13755 and IS : 15622 colour
such as white, grey, ivory, fume red brown, light green, light
blue and other light shades in floors, steps, pillars etc. laid on a
bed of neat cement slurry finished with flush pointing in the
white cement mixed with pigment to match the shade of the
tile complete (including the cost of cement mortar bed 1:4).
7.21.1 Size 250mm x 375mm Sqm 727.00
7.21.2 Size 300mm x 450mm Sqm 809.00
7.21.3 Size 300mm x 600mm Sqm 894.00
7.21.4 Size 250mm x 1000mm Sqm 1079.00
7.21.5 Size 600mm x 600mm Sqm 1162.00
BSR_B7 [87]
Chapter
Code No
1 2 3 4
7.22 P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles

on floor, skirting and steps etc.in different sizes (thickness
minimum 10mm) with water absortion less than or equal
colour and shade, laid with 20 mm thick CM 1: 4 including
etc complete.
7.22.1 Size 298mm x 298mm Sqm 705.00
7.22.2 Size 300mm x 450mm Sqm 870.00
7.22.3 Size 600mm x 600mm Sqm 1126.00
7.22.4 size 600 mm X 1200 mm Sqm 1415.00
7.23 Providing non slip grooves to granite/ kota stone flooring, Mtr. 105.00
counters, vanities etc. using groove cutter V type including
machine polishing to groove to give high gloss finish etc.
complete as per design approved by engineer in charge
7.24 P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on
floor, skirting and steps etc.in different sizes (thickness
etc complete.
7.24.1 size 600 mm X 600 mm Sqm 1183.00
7.24.2 size 600 mm X 1200mm Sqm 1645.00
7.25 P & F 1st quality Heavy Duty Vitrified Double Charged tiles
on floor, skirting and steps etc.in different sizes (thickness
etc complete.
7.25.1 size 600 mm X 600mm Sqm 1041.00
7.25.2 size 800 mm X 800mm Sqm 1296.00
7.25.3 size 1000 mm X 1000mm Sqm 1464.00
7.25.4 size 600 mm X 1200mm Sqm 1425.00
BSR_B7 [88]
Chapter
Code No
1 2 3 4
7.26 Providing and fixing 1st quality standard Marble printed/ Sqm. 1003.00
Granite Shade or Light/dark shad glazed tiles confirming to IS
: 13753 & IS :15622 of size 300mm x 600mm in walls, floors,
steps, pillars etc. laid on a bed of neat cement slurry finished
with flush pointing in the white cement mixed with pigment to
match the shade of the tile complete (excluding the cost of
cement plaster on walls and pillar).
BSR_B7 [89]
CHAPTER : B-8
WOOD WORK
Chapter
Code No
1 2 3 4
8.1 Providing & fixing door, window, chowkhats and other

frames, including antitermite treatment, M.S. flat, hold fasts of
size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long
duly embedded in cement concrete M-15 grade :
8.1.1 Sal wood Grade - I. Cum 48847.00
8.1.2 Kiln seasoned and chemically treated Hollock wood. Grade I Cum 41491.00
8.1.3 Sheesham wood Grade - I. Cum 101671.00
8.1.4 Nigeria teak wood Grade - I. Cum 110138.00
8.1.5 Ghana teak wood Grade - I. Cum 118554.00
8.1.6 Ivory coast wood Grade I Cum 135533.00
8.2 Supplying and fixing wood work in frames of wall panelling,

false ceiling partition wall etc. as per approved design and
drawing including antitermite treatment.
8.2.1 Hollock wood Grade - I. Cum 46270.00
8.2.2 Chir wood Grade - I. Cum 43387.00
8.3 Add extra in frames for circular members such as in fan lights, Cum 10%
staircase railing etc.
8.4 Providing and fixing fully panelled/partly panelled/ double

leaf shutter frames for doors as per approved design and
drawings with approved ordinary C.P./ oxidised steel fittings
as per Annexure - 'A' and width of styles & top rails of 100mm
and lock rails width of 150mm and bottom rails of 200mm
width including teak wood beading of size 19mm x 12mm on
both faces complete :
8.4.1 35 mm thick
8.4.1.1 Nigeria wood grade I Sqm 2778.00
8.4.1.2 Ghana wood grade I Sqm 2968.00
8.4.1.3 Shesham wood grade I Sqm 2584.00
8.4.1.4 Ivory coast wood grade I Sqm 3345.00
8.4.2 30 mm thick
BSR_B8 [90]
Chapter
Code No
1 2 3 4
8.5 Providing and fixing fully panelled /partly panelled double

leaf shutters frame for windows and ventilators as per
approved design and drawings with approved steel fittings as
per Annexure „A‟ and width of styles, bottom and top rails
75mm including intermediate rails 50mm wide, beading of
25mm x 15mm size on both faces :
8.5.1 35 mm thick
8.5.2 30 mm thick
8.5.3 25 mm thick
8.6 Providing and fixing wood panelling or panelling and glazing

in panelled or panelled and glazed shutters for doors, windows
and clerestory windows (Area of opening for panel inserts
excluding portion inside grooves or rebates to be measured).
Panelling for panelled and glazed shutter 25 mm to 40 mm
thick
8.6.1 Wood panel grade I

8.6.1.1 Nigeria wood Grade I Sqm 2244.00
8.6.2 IS 710- 1976 marked 9 mm thick commerical ply Sqm 906.00
8.6.3 IS 710- 1976 marked 9 mm thick Teak ply BWR one side Sqm 1568.00
8.6.4 IS 710- 1976 marked 9 mm thick Teak BWR ply both side Sqm 1821.00
8.6.5 IS 710- 1976 marked 12 mm thick commerical ply Sqm 1081.00
BSR_B8 [91]
Chapter
Code No
1 2 3 4
8.6.5A IS 710- 1976 marked 19 mm thick commerical ply Sqm 1243.00
8.6.6 IS 710- 1976 marked 12 mm thick Teak ply BWR one side Sqm 1821.00
8.6.7 IS 710- 1976 marked 12mm thick Teak ply BWR both side Sqm 2074.00
8.6.8 Wire gauge 24 gauge 14 mesh of IS 1568-1970 marked 85 Sqm 695.00

gauge of dia 0.56 mm
8.6.9 SS wire gauge 14 mesh x 24 gauge Sqm 927.00
8.6.10 4 mm plain float glass Sqm 839.00
8.6.11 5 mm float glass Sqm 1020.00
8.6.12 8 mm thick glass Sqm 1445.00
8.6.16 5 mm tinted glass Sqm 1628.00
8.6.17 5 mm reflected glass Sqm 1827.00
8.7 (a) Extra for providing frosted glass panes instead of ordinary Sqm 306.00
float glass panes in doors, windows and clerestory window
shutters. (Area of opening for glass panes excluding portion
inside rebate shall be measured).
8.7 (b) Extra for providing toughened glass panes instead of ordinary Per mm 50.00
float glass panes in doors, windows and clerestory window Per Sqm
shutters. (Area of opening for glass panes excluding portion
inside rebate shall be measured).
8.8 Deduct for providing pin headed glass panes instead of Sqm 96.00
ordinary float glass panes weighing 4 mm thick in doors,
windows and clerestory windows, shutters (Area of opening
for glass panes excluding portion inside rebate shall be
measured).
BSR_B8 [92]
Chapter
Code No
1 2 3 4
8.9 Extra for providing IS 1341-1992 marked Stainless Steel butt Sqm 127.00
hinges instead of black enamelled M.S. butt hinges with
necessary screws. (Shutter area to be measured).
8.10 Extra for providing movable/ fixed Nigeria / Ghana /Ivory Sqm 10 %
Teak wood grade - I louvers instead of wooden panels in
column No.4 for Nigeria / Ghana/Ivory Teak wood door
shutters.
8.11 Deduct for providing Single leaf shutter instead of double leaf. Sqm 20 %
8.12 Add extra for etching work in glass work as per direction of Sqm 20%
engineer incharge (Area of opening for glass panes excluding
portion inside rebate shall be measured)
8.13 Providing and fixing external grade board solid core single
leaf flush door shutters ISI 2202-67 marked using Phenol
formal dehyderesin in glue both sides with approved steel
fittings complete as per annexure 'A' :
8.13.1 25 mm thick .
8.13.1.1 Commercial Veneer both side Sqm 1686.00
8.13.1.2 Decorative teak veneer One side Sqm 1894.00
8.13.1.3 Decorative teak veneer both side Sqm 2376.00
8.13.2 30 mm thick .
8.13.3 35 mm thick .
8.14 Extra for providing external lipping with 2nd class teak wood Sqm 141.00
battens 6 mm minimum depth on all edges of shutters (over all area
of door shutter to be measured) Over item no. 8.13.
8.15 Extra for providing vision panel not exceeding 0.1 Sqm in all Each 128.00
type of flush doors (cost of glass excluded) (overall area of
door shutter to be measured) :
8.16 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door Sqm. 308.00
shutters (overall area of door shutters to be measured). .
BSR_B8 [93]
Chapter
Code No
1 2 3 4
8.17 Extra for cutting rebate in flush door shutters for making Sqm. 89.00
double leaf shutter(Total area of the shutter to be measured).
8.18 Extra for providing other type of fittings as mention in

annexure A ( as approved by EI) :
8.18.1 Brass fittings Sqm. 20 %
8.18.2 Stainless steel fittings Sqm. 10%
8.19 Providing and fixing Hollow core partition wall using 50x30
mm Chir wood frame 600 mm c/c on both directions,door
opening as per drawing with steel fittings antitermite treatment
complete as per specifications using :
8.19.1 ISI 4 mm thick commercial ply with 0.80 mm mica with Sqm 2044.00
adhesive on both sides.
8.19.2 ISI 4 mm teak ply one side BWR Sqm 1928.00
8.20 Providing and fixing wall panelling using soft wood frame of
size 50x25mm @600 mm c/c in both directions duly treated
with anti-termite treatment making grooves painting of
grooves specification and drawing using :
8.20.3 12mm thick Acoustical Board Sqm 1426.00
8.20.4 12 mm thick one side laminated board Practical board (Phenol Sqm 1748.00
bonded)
8.21.1 Providing and fixing 50 mm thick resin bounded glass wool 32 Sqm 560.00
kg/cum density wrapped in julities cloth bag (box type) and
held in position using chicken mesh
8.21.2 Providing and fixing Hassian cloth of approved colour and Sqm 312.00
texture over soft wood frame glass wool & fibre glass tissue
paper
8.22 Providing and fixing expandable fastners of specified size with

necessary plastic sleeves and galvanised M.S. screws
including drilling holes in masonry work /CC/R.C.C. and
making good etc. complete
8.22.1 25 mm long Each 13.00
8.22.2 32 mm long Each 17.00
8.22.3 40 mm long Each 18.00
8.22.4 50 mm long Each 19.00
BSR_B8 [94]
Chapter
Code No
1 2 3 4
8.23 Providing and fixing Nigeria / Ghana /Ivory Coast Teak

wood grade-I mouldings and beadings in doors and windows
size :-
8.23.1 50x12 mm Mtr 89.00
8.23.2 50x20 mm Mtr 127.00
8.23.3 25x12 mm Mtr 72.00
8.23.4 25x20 mm Mtr 88.00
8.24 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat Mtr 341.00
pressed 3 layer or graded wood particle board medium density
grade I, IS : 3087 marked including top cover of 6 mm
commercial ply wood conforming to IS: 303 BWR grade,
nickel plate MS 20 mm dia curtain rod with nickel plated
bracket including fixing with 25x3 mm MS flat 10 cm long all
complete
8.25 Providing and fixing curtain rods of 1.25 mm thick chromium

plated brass plate, with two chromium plated brass brackets
fixed with C.P. brass screws and wooden plugs, etc., wherever
necessary complete:
8.25.1 12 mm Mtr.. 231.00
8.25.2 20 mm Mtr.. 266.00
8.26 Providing and fixing IS : 3564 marked Aluminium die cast Each 908.00
body tubular type universal hydraulic door closer with
necessary accessories and screws etc. complete.
8.27 Providing and fixing IS : 3564 marked aluminium extruded Each 1478.00
section body tubular type universal hydraulic door closer with
double speed adjustment with necessary accessories and
screws etc. complete.
8.28 Providing and fixing Bamboo jaffery/ fencing consisting of Sqm 413.00
superior quality 25mm dia (Average) half cut bamboo placed
vertically and fixed together with three numbers horizontal
running members of wood in scantling of section 50X25mm
fixed with nails and GI wire to existing surface complete as
per direction of EI
BSR_B8 [95]
Chapter
Code No
1 2 3 4
8.29 Providing and Fixing Bamboo Zafari/Fencing consisting of Sqm 941.00

superior quality 25mm dia Solid Bamboo placed vertically &
fixed together with 3 Nos Horizontal running members of
wood in scantling of section size 50x40mm and fixed with nut
and bolt to existing surface/angle post as per direction given
by Engineer-in-charge
8.30 Providing and fixing wooden moulded corner beading of Rm 182.00

triangular shape to the junction of panelling etc. with iron
screws, plugs and priming coat on unexposed surface etc.
complete 2nd class teak wood.
50x50mm (base and height)
8.31 Providing and fixing bright finished Mortice lock of approved Each 629.00
make Godrej or equivalent with pair of CP handles for doors
with necessary screws etc complete (Best make of approved
quality) as per direction of Engineer-in-charge.
8.32 Extra for providing Brass handle instead of CP handle Each 10%
8.33 Providing and fixing Almirah lock (50 to 70 mm size )of approved Each 150.00
make without pair of handles for door with necessary screws etc
complete as per direction of Engineer-in-charge.
8.34 Providing & Fixing of ward robe shutters made out of 19mm
thick BWP block board ISI of superior quality make with
following details :-
Front side finishing with 1mm thick superior quality mica Sqm 5571.00
approved make and 0.8mm thick approved shade mica in the
inner side. Covering with teak wood beading 25x12mm all the
sides of shutter & 35x12mm on outer frame for making good
the wall joint including heavy brass S.S. fittings (Handle
200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock 1 Nos.,
Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos.,
SS Hanger Rod 20mm dia) complete as per drawing and
design approved by Engineer in Charge.
8.35 Providing & Fixing mica of approved make for inner/outer

side of shutters with fevicol & nails complete as per approved
by engineer in charge.
8.35.1 0.6mm thick mica Sqm 627.00

8.35.2 0.8mm thick mica Sqm 762.00
BSR_B8 [96]
Chapter
Code No
1 2 3 4
8.36 Providing & Fixing decorative veneer of approved make for

inner/outer side of shutters with fevicol & nails complete as
per approved by engineer in charge.
8.36.1 4.0mm thick veneer Sqm 1434.00

8.36.2 6.0mm thick veneer Sqm 1569.00
8.37 Providing and fixing S.S. Rod 30mm dia (304 grade ,16SWG) Rmt 650.00
including brackets fixed with C.P. brass screws and rawl
plugs, etc., wherever necessary complete two side central all
fittings.
8.38 Providing & Fixing BWR ISI marked 19 mm board of Sqm 1350.00
approved make for making wardrobe/shelves and other
furniture with fevicol & nails complete as per approved by
engineer in charge.
8.39 Providing & Fixing Commercial Ply as per IS 710 : 1976

BWR of approved make for making wardrobe/shelves and
other furniture with fevicol & nails complete as per approved
by engineer in charge.
(i) 18 mm thick Sqm 1350.00
(ii) 12 mm thick Sqm 1031.00
(iii) 6 mm thick Sqm 850.00
8.40 Providing & Fixing telescopic channel of approved make for

drawers with screws complete as per approved by engineer in
charge.
(i) 300mm long Each 426.00
(ii) 400mm long Each 513.00
(iii) 450mm long. Each 563.00
(iv) 500mm long Each 628.00
(v) 600mm long Each 751.00
8.41 Providing & Fixing drawer handle of approved make for

drawers with screws complete as per approved by engineer in
charge.
(i) 100mm long Each 159.00
(ii) 150mm long Each 195.00
8.42 Providing & Fixing drawer lock of approved make for drawers with Each 448.00
screws complete as per approved by engineer in charge.
BSR_B8 [97]
CHAPTER : B-9
STEEL & FENCING WORKS
Chapter
Code No
1 2 3 4
9.1 Structural steel work in single section fixed with or without Kg. 72.00
connecting plate including cutting, hoisting ( height upto 10
m), fixing in position and applying a priming coat of approved
steel primer all complete.
9.1.1 Add Extra if I/rail section is used Kg. 10%
9.2 Structural steel work riveted, bolted or welded in built up Kg. 81.00
sections, trusses and framed work, including cutting, hoisting
(height upto 10 m) , fixing in position and applying a priming
coat of approved steel primer all complete:
9.3 Steel work in built up tubular trusses including cutting,

hoisting ( height upto 10 m)fixing in position and applying a
priming coat of approved steel primer, welded and bolted
including special shaped washers etc. complete.
9.3.1 Hot finished welded type tubes. Kg. 100.00
9.3.2 Hot finished seamless type tubes. Kg 109.00
9.3.3 Electric resistance or induction butt welded tubes. Kg. 131.00
9.4 Extra for hoisting and fixing for every additional one metre or Kg. 6.00
part thereof beyond 10 mtr height.
9.5 Providing and fixing T-iron frames for doors, windows and Kg. 83.00
ventilators of mild steel Tee-sections, joints mitred and welded
with 15x3 mm lugs 10cm long embedded in cement concrete
blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size) or with wooden
plugs and screws or rawl plugs and screws or with fixing clips
or with bolts and nuts as require including fixing of necessary
butt hinges and screws and applying a priming coat of
approved steel primer.
BSR_B9 [98]
Chapter
Code No
1 2 3 4
9.6 Providing and fixing pressed steel door frames confirming to

IS 4351 manufactured from commercial mild steel sheet of
1.25 mm thickness including hinges jamb, lock jamb, bead and
if required angle threshold of mild steel angle of section
50x25mm, or base ties of 1.25mm pressed mild steel welded
or rigidly fixed together by mechanical means, adjustable lugs
with split end tail to each jamb including steel butt hinges
2.5mm thick with mortar guards, lock strike-plate and shock
absorbers as specified and applying a coat of approved steel
primer after pre-treatment of the surface including filling with
CC 1:2:4(M15 grade) complete as directed by Engineer-in-
charge :
9.6.1 Profile B Mtr. 429.00
9.6.2 Profile C Mtr. 469.00
9.6.3 Profile E Mtr. 506.00
9.7 Supply and fixing in cement mortar welded hand railing made Kg. 81.00
out of MS round or square bars, flats etc. for staircase or
verandah as per design complete in all respect (wooden or
PVC hand railing to be paid extra) with priming coat of red
oxide.
9.7.1 Extra for providing D type pipe head as top of hand railing Kg. 10%
9.8 Providing and fixing steel gate, grating , and grills made of Kg. 96.00
angles, tees, square bars, flats,or black pipe with holdfast and
fittings complete as per design and drawing including cutting
welding and fabrication with priming coat of red oxide
9.8.1 Extra if square,rectangular hollow tubelar sections are used or Kg. 10%
grill made by flats only
9.9 Providing and fixing cow catcher made of R.S. joist angles Kg. 74.00
channels MS rounds including cutting welding and fabrication
with priming coat of red oxide (as per design).
9.10 Providing and fixing in position collapsible steel shutters with Sqm. 5174.00
vertical M.S. Channels 20 x 10 x 2mm and bracket with flat
iron diagonals 20 x 5mm. size with top and bottom rail of T-
iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing
complete with bolts, nuts locking arrangements inside and
outside stoppers, handles etc. as per specification including
applying a priming coat of approved steel primer. (To be
measured and paid as per outer dimension).
BSR_B9 [99]
Chapter
Code No
1 2 3 4
9.11 Providing and fixing 1mm thick M.S. sheet sliding-shutters Sqm 3579.00
with frame & diagonals braces of 40 x 40 x 6mm. angle iron
3mm M.S. gusset plates at the junction and corners, 25mm dia
pulley 40x40x6mm angle and T-iron guide at the top and
bottom respectively including applying a priming coat of
approved steel primer.
9.12 Providing and fixing 1mm thick M.S. sheet garrage door
shutters with frame of 40 x 40 x 6mm. angle iron 3mm M.S.
gusset plates at the junction and corners including all fittings
and applying a coat of approved steel primer : (Excluding cost
of frames)
9.12.1 Using M.S. angles 40 x 40 x 6mm for diagonal braces. Sqm. 3141.00
9.12.2 Using flats 30 x 6mm for diagonal braces and central cross Sqm. 2993.00
piece.
9.13 Supplying and fixing rolling shutters of approved make, made Sqm. 2074.00
of 80 x 1.25mm. M.S. laths interlocked together through their
entire length and jointed together at the end by end locks
mounted on specially designed pipe shaft with brackets, side
guides and arrangements for inside and outside locking with
push and pull operation complete including cost of spring
hooks, providing and fixing necessary 25.3cm. long wire
springs grade No. 2 and M.S. top cover 1.25mm thick for
rolling shutters as per design & IS 6248- 1979. (Clear
openable area to be measured for payment).
9.14 Providing & fixing ball bearing for rolling shutters Each 516.00
9.15 Extra for providing mechanical device chain and crank

operation for operating rolling shutters.
9.15.1 Exceeding 10.00 Sqm and upto 16.80 Sqm in the area. Sqm. 823.00
9.15.2 Exceeding 16.80 Sqm in the area. Sqm. 887.00
9.16 Extra for providing grilled rolling shutters manufactured out of Sqm. 327.00
8 mm dia. M.S. bar instead of laths as per design approved by
Engineer-in-charge. (area of grill to be measured).
9.17 Providing and fixing M.S. sheet 1mm thick single leaf door Sqm. 2869.00
shutter in angle iron frame 35x35x5mm suitabilly diagonally
braced with 25x3mm flat iron above and below lock rail of
size 50x5mm beading extra including all fittings, as per
direction of Engg. incharge but excluding cost of chowkhats:
including two coats of anit-corrosive red oxide primer paint
BSR_B9 [100]
Chapter
Code No
1 2 3 4
9.17.1 Add extra for double leaf shutters. Sqm. 20%
9.18 Fixing standard steel glazed doors, windows and ventilators in Sqm. 278.00
walls with 15x3mm lugs 10cm long embedded in cement
concrete blocks 15x10 x10 cm of 1:3:6 (1 cement: 3 coarse
sand: 6 graded stone aggregate 20 mm nominal size) or with
wooden plugs and screws or rawl plugs and screws or with
fixing clips or with bolts and nuts as required, including fixing
of glass panes with glazing clips and special metal-sash putty
of approved make, or metal beading with screws (only steel
windows with lugs, glass pane cut to size and glazing clips or
metal beading with screws, shall be supplied by department
free of cost.)
9.19 Providing and fixing steel glazed doors windows and

ventilator shutters of standard rolled steel section (IS 1038-
1983) joints mitred and welded with steel lugs 13x3mm, 10cm.
long embedded in cement concrete block 15x10x10cm. of
1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate
20mm nominal size) or with wooden plugs and screws or rawl
plugs and screws with fixing clips or with bolts and nuts as
required including providing and fixing of plain glass panes
4mm thick with cooper glazing clips and special metal sash
putty of approved make or metal beading with screws
complete including priming coat of approval steel primer,
excluding the cost of metal beading and other fitting except
necessary hinges of pivots steel handles peg stay etc. as
required :
9.19.1 Doors Sqm. 3099.00
9.19.2 Windows fixed Sqm. 3090.00
9.19.3 Windows side hung /Ventilators top or centre hung (openable) Sqm. 3135.00
9.19.4 Partly fixed and partly openable [ fixed area not to exceed Sqm. 3090.00
33%]
9.20 Providing brass handles/peg stays and fittings in place of Sqm. 5%

oxidized fitting
9.21 Aluminium handles/peg stays fitting instead of oxidized Sqm. 3%

fitting.
9.22 5mm thick plain glass instead of 4mm thick plain glass Sqm. 95.00
9.23 Deduct for Not providing glass panels Sqm. 311.00
BSR_B9 [101]
Chapter
Code No
1 2 3 4
9.24 Deduct for Pin headed 4mm thick glass panels is used instead Sqm. 5%
of 4mm thick plain glass
9.25 Deduct for Not provided oxidised fittings. Sqm. 5%
9.26 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge Sqm. 617.00
to the metal frame of rolled section by metal beading 20x3mm
with suitable screw at not exceeding 150mm distance.
9.27 Providing and fixing Square bars or other flat welded to Kg. 65.00
window, ventilatiors etc.
9.28 Providing and fixing steel glazed window frame made out of
80x40 mm hollow sheet section of 16 gauge thickness, joint
mitred welded and grinded including hold fast of steel lugs
13mm x 3mm and 15 Cm long embedded in C C block 15 x
10 x 10 Cm of 1:3:6 nominal concrete and including fixing of
pivoted hinges of superior quality, window shutters made out
of 50 x 25.0 mm hollow steel section 15 mm paitam of 18
gauge thickness, joint mitred and grinded including 10mm x
10mm square bars welded to frame for paitam fixing float
glass 4mm thick panes with glazing clips and metal sash putty
and fixing of shutters frames peg stay, U shape handle 100
mm long, tower bolts 100 mm long of steel powder coated
superior quality including fixing and jointing with frame
hinges priming coat with steel primer complete in all respect
as per direction of Engineer-in –charge
9.28.1 Window openable. Sqm 3803.00
9.28.2 Window fixed. Sqm 3501.00
9.28.3 Extra for additional shutter in pipe section windows with wire Sqm 1654.00
gauge 14 mesh x 24 gauge
FENCING WORK
9.29 180cm high fencing with angle iron post 55x55x6mm. placed Mtr. 586.00
at every 3Mtr. apart 45cm. in ground embedded in cement
concrete 1:3:6 (30x30x60cm) corner and every tenth post to be
strutted with 55x55x6mm. angle iron provided with 6
horizontal lines and two diagonals of black barbed wire
between two posts fitted and fixed with G.I. staples including
earth work in excavation etc. complete.
BSR_B9 [102]
Chapter
Code No
1 2 3 4
9.30 150 cm high fencing of precast R.C. posts of 15cmx15cm Mtr. 503.00
tapered to 10x10cm at top placed at every 3m apart 30cm in
ground embedded in cement concrete 1:3:6 (30x30x45cm)
corner and every tenth posts to be strutted with same R.C.
posts provided with 6 horizontal lines and two diagonals of
black barbed wire between the two posts fitted and fixed with
G.I. staples including earth work in excavation etc. complete
9.31 150cm high fencing with angle iron 50x50x6mm. placed at Mtr. 512.00
every 3Mtr. apart 30cm. in ground embedded in cement
concrete 1:3:6 (30x30x45cm) corner and every tenth post to be
strutted with 50x50x6mm. angle iron provided with 5
between two posts fitted and fixed with G.I. staples including
9.32 120cm. high fencing with angle iron posts 50x50x6mm. placed Mtr. 470.00
at every 3 Mtr. apart 30cm. in ground embedded in cement
concrete 1:3:6 (30x30x45cm) corner & every tenth posts to be
strutted with 50x50x6mm angle iron provided with four
between two posts fitted and fixed with G.I. staple including
9.33 Add or deduct for each wire line over basic item Mtr. 12.00
9.34 Add or deduct for additional or less higher per 10 Cm. over Mtr 5%
basic item
9.35 Extra for using galvanized barbed wire instead of black barbed Mtr. Each 5%
wire. wire
9.35.1 Add Extra if barbed wire fencing is done on wall upto height Mtr. 5%
of 3.00 Mtr.
9.36 Supplying and fixing of chain link fencing with angle iron
posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground
embedded in cement concrete 1:3:6 (30x30x45cm) corner and
every tenth post to be strutted with (50 x 50 x 6cm) angle iron
provided and fixed and fitted with posts including earth work
in excavation etc. complete with chain link size.
9.36.1 50mm x 50mm x 3.15mm Sqm. 629.00
9.36.2 75mm x 15mm x 3.15mm Sqm. 565.00
9.36.3 100mm x 100mm x 3.15mm Sqm. 521.00
BSR_B9 [103]
Chapter
Code No
1 2 3 4
9.36.4 150mm x 150mm x 3.15mm Sqm. 480.00
9.37 Providing and fixing concertina coil fencing with required dia Mtr. 266.00
610 mm (having 15 nos. round per 6 metre length) up to 3m
height of wall with existing angle iron 'Y' shaped placed 2.4 m
or 3.00 m apart and with 9 horizontal R.B.T. stud tied with GI
staples and GI clips to retain horizontal including necessary
bolts or GI barbed wire tied to angle iron all complete as per
direction of Engineer In Charge with reinforced barbed tape
(R.B.T.)/Spring core(2.5 mm thick) wire of high tensile
strength of 165 kg/sq.mm with tape (0.52 mm thick) and
weight 43.478 gm/metre (Cost of MS angle, CC block shall be
paid extra)
9.38 Providing and fixing welded mesh/expanded metal mesh in

frame work, flat iron beading 20x3mm including top cross laps
inside and out sides welding, iron bolts, crews, clips etc.
complete (excluding frame work) of size.
9.38.1 Welded mesh 50 mmx 50 mm x 2.1 mm Sqm. 693.00
9.38.4 Expended metal size 20-25 mm size 18SWG Sqm. 779.00
9.39 Providing and fixing of double leaf steel shutter for cupboard, Sqm 3895.00
the frame is made of pressed steel ISI section 80x25 mmx
1.25 mm thick with 1.00 mm MS sheet to spot welded
including holdfasts of 15x3mm, MS oxidized fittings such as
butt hinges, sliding doors bolts, handles, tower bolts and twin
peg etc complete including applying priming coat of approved
steel primer of red oxide zinc chromate and spray painting in
approved shade with deco paint of approved quality complete
as per direction of Engineer In Charge
BSR_B9 [104]
CHAPTER : B-10
ROOFING
Note :
1 Rates are for complete item of work and are inclusive of all
centering, shuttering, curing and finishing including all leads
and delivery of material at site of work with all lead and lift.
2 The rates for G.I. sheet roofing are inclusive of all necessary,
overlaps and wastage in cutting and all standard screws nuts
washers bolts and nuts „J‟ or „L‟ hooks etc. required as per
specifications.
3 All precautions shall be taken to ensure that the finished roof
is water tight and without any leakage under all weather
conditions. Particular care shall be taken in providing good
workmanship specially at vulnerable points.
Chapter
Code No
1 2 3 4
GALVANISED IRON SHEET ROOFING
10.1 Providing corrugated G.S. sheet roofing including vertical /

curved surface fixed with polymer coated J or L hooks, bolts
and nuts 8 mm diameter with bitumen and G.I. limpet
washers or with G.I. limpet washers filled with white lead
and including a coat of approved steel primer and two coats
of approved paint on overlapping of sheets complete (upto
any pitch in horizontal/ vertical or curved surfaces)
excluding the cost of purlins, rafters and trusses and
including cutting to size and shape whenever required.
10.1.1 1.00 mm thick with zinc coating not less than 275 gm/m2 Sqm 904.00
10.1.2 2 Sqm 765.00
0.80 mm thick with zinc coating not less than 275 gm/m
10.1.3 2 Sqm 645.00
0.63 mm thick with zinc coating not less than 275 gm/m
10.2 Extra for straight cutting in C.G.S. sheet roofing for making P.Mtr. 31.00
opening of area exceeding 40 sq. decimetre for chimney Peri-
stacks, sky light etc. : meter
10.3 Extra for circular cutting in C.G.S. sheet roofing for making P.Mtr. Peri- 143.00
opening of area exceeding 40 square decimetre : meter
10.4 Providing ridges or hips of width 60 cm over all width plain

G.S. sheet fixed with polymer coated J or L hooks, bolts and
nuts 8 mm dia. G.I. limpet and bitumen washers complete.
10.4.1 0.80mm thick with zinc coating not less than 275 Mtr. 503.00
10.4.2 0.63mm thick with zinc coating not less than 275 Mtr. 441.00
BSR_B10 [105]
Chapter
Code No
1 2 3 4
10.5 Providing valleys of 90cm wide overall in plain G.S. sheet Mtr. 937.00
fixed with polymer coated J or L hooks, bolts and nuts 8mm
dia. G.I. limpet and bitumen washers complete :
1.60mm thick with zinc coating not less than 350gm/m²
10.6 Providing flashing of 40 cm over all width in plain, G.S. Mtr. 358.00
sheet fixed with polymer coated J, or L hooks, bolts and nuts,
G.I. limpet and bitumen washer complete, bent to shape and
fixed in wall with cement mortar 1:3 (1cement : 3 coarse
sand)
1.00mm thick sheet
10.7 Providing and fixing 15 cm wide 45 cm over all semi

circular plain G.S. sheet gutter with iron brackets 40x3mm
size, bolts, nuts and washers etc. including making necessary
connections with rain water pipes complete.
10.7.1 0.80mm thick Mtr. 463.00
10.7.2 0.63mm thick Mtr. 405.00
10.8 Providing non-asbestos high impact Polypropylene reinforced Sqm 383.00

cement 6 mm thick corrugated sheets (As per IS: 14871)
roofing upto any pitch and fixing with polymer coated J, or L
hooks, bolts and nuts 8mm dia. G.I. plain and bitumen
washers or with self drilling fastener and EPDM washers etc.
complete excluding the cost of purlins, rafters and trusses
corrugated sheets and including cutting to size and shape
wherever required
10.9 Extra for straight cutting in non- asbestos polypropylene Mtr. 28.00
reinforced cement corrugated, semi-corrugated 6 mm thick
sheet roofing for making openings of area exceeding 40
square decimetre for chimney stacks, skylights etc.
10.10 Extra for circular cutting in non-asbestos polypropylene Mtr. 75.00

reinforced cement corrugated/ semi-corrugated 6 mm thick
sheet roofing for making openings of area exceeding 40
square decimetre.
10.11 Extra for providing and fixing wind ties of 40x 6mm flat iron Mtr. 113.00
section.
10.12
Providing and fixing ridges and hips in non-asbestos fibre
cement high impact polypropylene reinforced roofing with
suitable fixing accessories or self drilling fastener and EPDM
washer etc. complete.
10.12.1 One piece corrugated serrated adjustable ridges Mtr. 387.00
BSR_B10 [106]
Chapter
Code No
1 2 3 4
10.12.2 Plain wing adjustable ridges Mtr. 414.00
10.12.3 Close fitting adjustable ridges Mtr. 510.00
10.12.4 Unserrated adjustable hips Mtr. 436.00
10.13 Providing and fixing non-asbestos fibre cement high impact

polypropylene reinforced roofing accessories in all colours
with polymer coated J or L hooks, bolts and nuts and or G.I.
seam bolts and nuts, G.I. plain and bitumen washers or with
self drilling fastener and EPDM washer etc. complete :
10.13.1 Corrugated appron pieces Mtr. 262.00
10.13.2 Eaves filler pieces Mtr. 179.00
10.13.3 North light curve Mtr. 388.00
10.13.4 Ventilator curve Mtr. 486.00
10.13.5 Barge boards Mtr. 397.00
10.13.6 Ridge final pair 163.00
10.13.7 Special north light ventilator curve Each 510.00
10.13.8 S type louvers Mtr. 277.00
10.14 Providing flat iron brackets 50x3mm size with necessary Mtr. 42.00
bolts, nuts and washers etc. for fixing asbestos cement/G.S.
sheets gutters with purlins.
10.15 Painting top of roofs with bitumen of approved quality at Sqm 143.00
17kg per 10 sqm impregnated with a coat of coarse sand at 60
cudm per 10sqm including cleaning the slab surface with
brushes and finally with a piece of cloth lightly soaked in
kerosene oil complete: With residual type petroleum bitumen
of penetration 80/100
10.16
Stone slab roofing on ground floor with fine grained stone Sqm 1648.00
slab from approved quarry including filling of joints of
parapet and slab on both sides in cement sand mortar 1:4,
with ceiling pointing in cement sand mortar 1 : 3 complete as
per specification and instruction of Engineer In Charge
10.16.1 Add extra for subsequent story Sqm 20%
10.17
Grading roof for water proofing treatment with water
proffing compound
10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded Cum 4483.00
stone aggregate 20 mm nominal size)
10.17.2 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum 5841.00
10.17.3 Cement mortar 1:4 (1cement : 4 coarse sand) Cum 4862.00
10.18 Providing and laying brick kharanja on roofs with cement

mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral
water proofing compound in square pattern
BSR_B10 [107]
Chapter
Code No
1 2 3 4
10.18.1 75mm to 100mm thick average Sqm 277.00
10.18.2 55mm to 60mm thick average Sqm 251.00
10.19 Providing and laying brick tiles of class designation 100 over Sqm 358.00
roofs grouted with cement mortar 1:3 (1 cement : 3 fine sand)
mixed with 2% of integral water proofing compound by
weight of cement, over a 12 mm layer of cement mortar 1:3 (
1 cement : 3 fine sand ) and finished neat .
10.20 Providing and fixing 20 mm thick precast terrazo tiles of Sqm 350.00
approved make, with marble chips of size upto 6mm laid over
roof with neat cement slurry mixed with pigment to match the
shade of the tiles, including cutting ,grinding rubbing with
machine complete on 20 mm thick bed of cement sand
mortar 1 : 4.
10.21 Providing and laying integral cement based water proofing

treatment including preparation of surface as required for
treatment of roofs, balconies, terraces etc consisting of
following operations.
(a) Applying and grouting a slurry coat of neat cement using
2.75 kg/sqm. of cement admixed with proprietary water
proofing compound conforming to IS. 2645 over the RCC
slab including cleaning the surface before treatment.
(b) Laying cement concrete using broken bricks/brick bats
25 mm to 100mm size with 50% of cement mortar 1:4 (1
cement : 4 coarse sand) admixed with proprietary water
proofing compound conforming to IS : 2645 over 20 mm
thick layer of cement mortar of mix 1:4 (1 cement :4 coarse
sand ) admixed with proprietary water proofing compound
conforming to IS : 2645 to required slope and treating
similarly the adjoining walls upto 300 mm height including
rounding of junctions of walls and slabs.
BSR_B10 [108]
Chapter
Code No
1 2 3 4
(c) After two days of proper curing applying a second coat of Sqm 473.00
cement slurry admixed with proprietary water proofing
compound conforming to IS : 2645.
(d) Finishing the surface with 20 mm thick jointless cement
mortar of mix 1:4 (1 cement :4 coarse sand) admixed with
proprietary water proofing compound conforming to IS :
2645 and finally finishing the surface with trowel with neat
cement slurry and making of 300x300xmm square
(e) The whole terrace so finished shall be flooded with
water for a minimum period of two weeks for curing and for
final test. All above operations to be done in order and as
directed and specified by the Engineer-in-Charge.
With average thickness of 120mm and minimum thickness at
khurra as 65 mm.
10.22 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement Mtr. 111.00
: 2 coarse sand : 4 stone aggregate 10mm and down gauge)
including finishing with cement mortar 1:3 (1 cement : 3 fine
sand) as per standard design :
10.23 Making khurras 450 x 450mm with average minimum Each 154.00
thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1
Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster
1 : 3 and one coat of neat cement, rounding edges and
making and finishing the out let complete.
10.24 Providing & laying broken glazed titles on roof ( broken Sqm 317.00
glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @
1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30
Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with
cement mortar 1 :2 (1 cement:2 marble dust mixed with water
proofing compund all complete as per direction of Engineer-
in-charge.
BSR_B10 [109]
Chapter
Code No
1 2 3 4
10.25 Providing & fixing UV stabilised fiberglass reinforced plastic
sheet roofing upto any pitch including fixing with polymer
coated „J‟ or „L‟ hooks, bolts & nuts 8mm dia. G.I
plain/bitumen washers complete but excluding the cost of
purlins, rafters, trusses etc. The sheets shall be manufactured
out of 2400 TEX panel rovigs incorporating minimum 0.3%
Ultra-voilet stabiliser in resin system under approximately
2400 psi and hot cured. They shall be of uniform
pigmentation and thickness without air pockets and shall
confoim to IS 10192 and IS 12866.The sheets shall be
opaque or translucent, clear or pigmented, textured or smooth
as specified.
10.25.1 2.0mm thick (Wt. 3.3 Kg./Mtr. Sq.) Sqm 911.00
10.26 Extra for corrugated Fiberglass Reinforced Plastic (FRP) Sqm 10%
(2.5" /4.2"/6") or step down (2.5" /4.2"/6") as specified.
FALSE CEILING
10.27 Providing and fixing 12.5 mm thick tapered edge gypsum Sqm 825.00
board conforming to IS 2095- Part I at all height false ceiling
including providing and fixing of frame work made of special
sections power pressed from M.S. sheet and galvanised in
accordance with zinc coating of grade 350 as per IS : 277 and
consisting of angle cleats of size 25mm wide x 1.6mm thick
with flanges of 22mm and 37mm at 1200mm centre to centre
one flange fixed to the ceiling with dash fastener 12.5mm
diax40mm long with 6mm dia bolts to the angle hangers of
25x25x0.55mm of required length, and other end of angle
hanger being fixed with nut and bolts to G.I. channels
45x15x0.9mm running at the rate of 1200mm centre to centre
to which the ceiling section 0.5mm thick bottom wedge of
80mm with tapered flanges of 26mm each having clips of
10.5mm at 450mm centre to centre shall be fixed in a
direction perpendicular to G.I. channel with connecting clips
made out of 2.64mm diax230mm long
BSR_B10 [110]
Chapter
Code No
1 2 3 4
G.I. wire at every junction including fixing the gypsum board
with ceiling section and perimeter channels 0.5mm thick
27mm high having flanges of 20mm and 30mm long, the
perimeter of ceiling fixed to wall/partition with the help of
rawl plugs at 450mm centre to centre with 25mm long drive-
all screws @ 230mm interval including jointing and fixing to
a flush finish of tapered and square edges of the board with
recommended filler, jointing tapes, finisher and two coats of
primer suitable for board as per manufactures specification
and also including the cost of making openings for light
fittings, grills, diffusers, cutouts made with frame of
perimeter channels suitably fixed all complete as per drawing
and specification and direction of the Engineer in Charge but
excluding the cost of painting.
10.28 Providing and fixing 14 mm thick Acoustical with fine Sqm 1063.00
fissured tiles/ Mineral fibre high density tiles with butt edges
false ceiling tiles of size 595x595 mm in true horizontal
level suspended on inter locking metal grid of hot dipped
galvanised steel sections ( galvanized @ 170 gsm/sqm.)
consisting of main “T” runner with suitably spaced joints to
get required length and of size 24x38mm made from 0.30mm
thick (minimum) sheet spaced at 1200mm center to center
and cross “T” of size 24x25mm made of 0.30mm thick
(minimum) sheet, 1200mm long spaced between main “T” at
600mm center to center to form a grid of 1200x600 mm and
secondary cross “T” of length 600mm and size 24x25mm
made of 0.30 mm thick (minimum) sheet to be interlocked at
middle of the 1200x600mm panel to
form grids of 600x600mm and wall angle of size 21x21x0.30
mm and laying false ceiling tiles of approved texture in the
grid including, wherever, required, cutting/making, opening
for services like diffusers, grills, light fittings, fixtures, smoke
detectors etc. Main “T” runners to be suspended from ceiling
using GI slotted cleats fixed to ceiling with 6 mm dia and
50mm long dash fasteners, 4mm GI adjustable rods with
galvanised level clips spaced at 1200mm center to center
along main T, bottom exposed width of 24mm of all T-
sections shall be pre-painted with polyester paint, all
complete at all heights as per specifications drawings and as
directed by Engineer-in-Charge. ( The tiles should of 90 %
RH avg. NCR 0.55 light reflectance> 80% thermal
conductiveity K = 0.052-0.057 w/m K colour white. Fire
performance class 0/class I(BS 476) with warranty against
sag)
BSR_B10 [111]
Chapter
Code No
1 2 3 4
10.29 Providing & fixing 12 mm thick tegular edge Glass Fibre Sqm 1365.00
Reinforced Gypsum False ceiling tiles of size 595 x 595 mm
in true horizontal level suspended on inter locking metal grid
of hot dipped galvanised steel sections ( galvanized @ 170
gsm/sqm.) consisting of main “T” runner with suitably
spaced joints to get required length and of size 24x38mm
made from 0.30mm thick (minimum) sheet spaced at
1200mm center to center and cross “T” of size 24x25mm
made of 0.30mm thick (minimum) sheet, 1200mm long
spaced between main “T” at 600mm center to center to form
a grid of 1200x600 mm and secondary cross “T” of length
600mm and size 24x25mm made of 0.30 mm thick
(minimum) sheet to be interlocked at middle of the
1200x600mm panel to form
grids of 600x600mm and wall angle of size 21x21x0.30 mm
and laying false ceiling tiles of approved texture in the grid
including, wherever, required, cutting/making, opening for
services like diffusers, grills, light fittings, fixtures, smoke
detectors etc. Main “T” runners to be suspended from ceiling
using GI slotted cleats fixed to ceiling with 6 mm dia and
50mm long dash fasteners, 4mm GI adjustable rods with
galvanised level clips spaced at 1200mm center to center
along main T, bottom exposed width of 24mm of all T-
sections shall be pre-painted with polyester paint, all
complete at all heights as per specifications drawings and as
directed by Engineer-in-Charge.
10.30 Providing and fixing calcium silicate board false ceiling at all
heights including providing and fixing of frame work made of
special sections power pressed from M.S. sheet and
galvanised in accordance with zinc coating of grade 350 as
per IS : 277 and consisting of angle cleats of size 25mm wide
x 1.6mm thick with flanges of 22mm and 37mm at 1200mm
centre to centre one flange fixed to the ceiling with dash
fastener 12.5mm diax40mm long with 6mm dia bolts to the
angle hangers of 25x25x0.55mm of required length, and
other end of angle hanger being fixed with nut and bolts to
G.I. channels 45x15x0.9mm running at the rate of 1200mm
centre to centre to which the ceiling section 0.5mm thick
bottom wedge of 80mm with tapered flanges of 26mm each
having clips of 10.5mm at 450mm centre to centre shall be
fixed in a direction perpendicular to G.I. channel with
connecting clips made out of 2.64mm diax230mm long
BSR_B10 [112]
Chapter
Code No
1 2 3 4
G.I. wire at every junction including fixing the calcium
silicate board with ceiling section and perimeter channels
0.5mm thick 27mm high having flanges of 20mm and 30mm
long, the perimeter of ceiling fixed to wall/partition with the
help of rawl plugs at 450mm centre to centre with 25mm long
drive-all screws @ 230mm interval including jointing and
fixing to a flush finish of tapered and square edges of the
board with recommended filler, jointing tapes, finisher and
two coats of primer suitable for board as per manufactures
specification and also including the cost of making openings
for light fittings, grills, diffusers, cutouts made with frame of
excluding the cost of painting of thickness of calcium silicate
board as below:-
10.30.1
6 mm thick Sqm 913.00
10.30.2
8 mm thick Sqm 1025.00
10.31 Providing & fixing calcium silicate ceiling tiles of size 595 x
595 mm in true horizontal level suspended on inter locking
metal grid of hot dipped galvanised steel sections (
galvanized @ 170 gsm/sqm.) consisting of main “T” runner
with suitably spaced joints to get required length and of size
24x38mm made from 0.30mm thick (minimum) sheet spaced
at 1200mm center to center and cross “T” of size 24x25mm
1200x600mm panel to form grids of 600x600mm and wall
angle of size 21x21x0.30 mm and laying false ceiling tiles of
approved texture in the grid including, wherever, required,
cutting/making, opening for services like diffusers, grills,
light fittings, fixtures, smoke detectors etc.
Main “T” runners to be suspended from ceiling using GI
slotted cleats fixed to ceiling with 6 mm dia and 50mm long
dash fasteners, 4mm GI adjustable rods with galvanised level
clips spaced at 1200mm center to center along main T,
bottom exposed width of 24mm of all T-sections shall be pre-
painted with polyester paint, all complete at all heights as per
specifications drawings and as directed by Engineer-in-
Charge of thickness of tiles as mentioned below:-
10.31.1 6 mm thick Sqm 649.00
10.31.2 8 mm thick Sqm 745.00
BSR_B10 [113]
Chapter
Code No
1 2 3 4
10.32 Providing and fixing calcium silicate perforated board false

ceiling at all heights including providing and fixing of frame
work made of special sections power pressed from M.S. sheet
and galvanised in accordance with zinc coating of grade 350
as per IS : 277 and consisting of angle cleats of size 25mm
wide x 1.6mm thick with flanges of 22mm and 37mm at
1200mm centre to centre one flange fixed to the ceiling with
dash fastener 12.5mm diax40mm long with 6mm dia bolts to
the angle hangers of 25x25x0.55mm of required length, and
other end of angle hanger being fixed with nut and bolts to
G.I. channels 45x15x0.9mm running at the rate of 1200mm
centre to centre to which the ceiling section 0.5mm thick
bottom wedge of 80mm with tapered flanges of 26mm each
having clips of 10.5mm at 450mm centre to centre shall be
fixed in a direction perpendicular to G.I. channel with
connecting clips made out of 2.64mm diax230mm
long G.I. wire at every junction including fixing the calcium

silicate board with ceiling section and perimeter channels
0.5mm thick 27mm high having flanges of 20mm and 30mm
long, the perimeter of ceiling fixed to wall/partition with the
help of rawl plugs at 450mm centre to centre with 25mm long
drive-all screws @ 230mm interval including jointing and
fixing to a flush finish of tapered and square edges of the
board with recommended filler, jointing tapes, finisher and
two coats of primer suitable for board as per manufactures
specification and also including the cost of making openings
for light fittings, grills, diffusers, cutouts made with frame of
but excluding the cost of painting of thickness of calcium
silicate board as below:-
10.32.1 6 mm thick Sqm 1178.00
10.32.2 8 mm thick Sqm 1317.00
BSR_B10 [114]
Chapter
Code No
1 2 3 4
10.33 Providing & fixing calcium silicate perforated ceiling tiles of
size 595 x 595 mm in true horizontal level suspended on inter
locking metal grid of hot dipped galvanised steel sections (
galvanized @ 170 gsm/sqm.) consisting of main “T” runner
with suitably spaced joints to get required length and of size
24x38mm made from 0.30mm thick (minimum) sheet spaced
at 1200mm center to center and cross “T” of size 24x25mm
1200x600mm panel to form grids of 600x600mm
and wall angle of size 21x21x0.30 mm and laying false
ceiling tiles of approved texture in the grid including,
wherever, required, cutting/making, opening for services like
diffusers, grills, light fittings, fixtures, smoke detectors etc.
Main “T” runners to be suspended from ceiling using GI
slotted cleats fixed to ceiling with 6 mm dia and 50mm long
dash fasteners, 4mm GI adjustable rods with galvanised level
clips spaced at 1200mm center to center along main T,
bottom exposed width of 24mm of all T-sections shall be pre-
painted with polyester paint, all complete at all heights as per
specifications drawings and as directed by Engineer-in-
Charge of thickness of tiles as mentioned below:-
10.33.1 6 mm thick Sqm 855.00
10.33.2 8 mm thick Sqm 989.00
10.34 Providing and fixing 15 mm thick densified tegular edged eco Sqm 1650.00
friendly light weight calcium silicate false ceiling tiles of
approved texture as per direction of Engineer-in-charge of
size 595 X 595 mm in true horizontal level suspended on
inter locking metal grid of hot dipped galvanized steel
sections (galvanizing @120 grams per sqm) consisting of
main „T‟ runner suitably spaced at joints to get required
length and size of 24X38mm made from 0.33 mm thick
(minimum) sheet, 1200mm centre to centre, and cross „T‟ of
size 24X32mm made out of 0.33mm (Minimum) sheet,
1200mm long spaced between main „T‟ at 600mm centre to
centre to form a grid of 1200X600mm and secondary cross
‟T‟ of length 600mm and size 24X32mm made out of 0.33
mm thick (Minimum) sheet to be interlocked at middle of the
1200X600mm panel to form grid of size 600X600mm
resting...
BSR_B10 [115]
Chapter
Code No
1 2 3 4
...on periphery walls/partitions on a perimeter wall angle pre-
coated steel of size (24X24X3000mm made of 0.40mm thick
(minimum) sheet with the help of rawl plugs at 450mm centre
to centre with 25mm long dry wall screws @ 230mm interval
and laying 15mm thick densified edged calcium silicate
ceiling tiles of approved texture in the grid including cutting
/making opening for services like diffusers, grills, light
fitting, fixtures, smoke detectors etc., wherever required,
Main „T‟ runners to be suspended from ceiling using 50 mm
long M 6 dash fasteners, 6mm G.I. fully threaded rods with
galvnised steel L cleat level adjusters of size 80x25x2mm,
spaced at 1200mm centre to centre long main „T‟ bottom
exposed with 24mm of all T-sections shall be pre-painted
with polyster baked paint, for all heights, as per
specifications, drawing and as directed by engineer-in-charge.
Note :- Only calcium silicate false ceiling area will be
measured from wall to wall. No deduction shall be made for
exposed frames/opening (cut outs)having area less than 0.30
Sqm. The calcium silicate ceiling tiles shall have NRC.
Value 0.50 (Minimum), light reflection> 85% non-
10.35 Providing and fixing tiled false ceiling of approved materials
of size 595X595 mm in true horizontal level suspended on
inter locking metal grid of hot dipped galvanized steel
sections ( galvanized @ 120 grams per sqm both side
inclusive ) consisting of main “T” runner with suitably
spaced joints to get required length and of size 24X38 mm
made from 0.30 mm thick (minimum) sheet spaced at 1200
mm center to center and cross “T” of size 24X25 mm made
of 0.30 mm thick (minimum) sheet, 1200 mm long spaced
between main “T” at 600 mm center to center to form a grid
of 1200X600 mm and secondary cross “T” of length 600 mm
and size 24X25 mm made of 0.30 mm thick (minimum) sheet
to be interlocked at middle of the 1200X600 mm panel
BSR_B10 [116]
Chapter
Code No
1 2 3 4
to form grids of 600X600 mm and wall angle of size
24X24X0.3 mm and laying false ceiling tiles of approved
texture in the grid including, required cutting/ making,
opening for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc. Main “T” runners to be
suspended from ceiling using GI slotted cleats of size 27 X
37 X 25 X 1.6 mm fixed to ceiling with 12.5 mm dia and 50
mm long dash fasteners, 4 mm GI adjustable rods with
galvanized butterfly level clips of size 85 X 30 X 0.8 mm
spaced at 1200 mm center to center along main T, bottom
exposed width of 24 mm of all T-sections shall be pre-
painted with polyester paint, all complete for all heights as
per specifications, drawings and as directed by Engineer-in-
charge.
10.35.1 GI Metal Ceiling Lay in Plain Tegular edge Global white Sqm 1562.00
colour tiles of size 595X595 mm, and 0.5 mm thick with 8
mm drop, made of G I Sheet having galvanizing of 100
gms/sqm (boths ides inclusive) and electro statically polyester
powder coated of thickness 60 microns (minimum), including
factory painted after bending.
10.35.2 GI Metal Ceiling Lay in perforated Tegular edge global white Sqm 1690.00
colour tiles of size 595x595mm and 0.5 mm thick with 8 mm
drop made of GI Sheet having galvanizing of 100 gms/ sqm
(both sides inclusive) and 20% perforation area with 1.8 mm
dia holes and having NRC (Noise Reduction Coefficient ) of
0.5, electro statically polyester powder coated of thickness 60
microns (minimum), including factory painted after bending
and perforation and backed with a black Glass fiber
acoustical fleece.
10.35.3 12.5mm thick square edge PVC laminated Gypsum tiles of Sqm 1890.00
size 595mm x 595mm, made of Gypsum plasterboard,
manufactured from natural gypsum as per IS 2095 part I and
laminated with white 0.16mm thick fire retardant PVC film
on the face side and 12 micron metalized polyester on the
back side with all edges sealed with the face side PVC film
which goes around and wraps the edges and is bonded to the
edged and the back side metalized polyester film so as to
make the tile a completely sealed unit.
BSR_B10 [117]
Chapter
Code No
1 2 3 4
10.35.4 Providing Solid PVC false Ceiling consisting of 600mm x Sqm 1550.00
600mm, 5mm (±0.25) thick Plain embossed PVC sheet of
Density 600 Kg /Cbm Manufactured by an ISO-9001-2015
certified Company, used as panel insert in a frame work made
using powder coated aluminum T- section of sizes 1” x1”(
25x25mm, 19 gauge or 1mm thick ) in square pattern of
grid sizes of 2‟x2‟( 600x600mm ). The aluminum framework
is supported from the ceiling with the help of 'J' hook and G.I.
wire / 6mm M.S. rods of required sizes to maintain proper
level etc. The aluminum framework is supported on side wall
with the use of aluminum L-section of size 1”x1” ( 25x25mm
) angles etc. Complete as per direction of Engineer-In-charge,
manufacturer‟s specification & drawing.
10.36 Providing & Fixing of Mineral Fibre Anti Bacterial Mtr 1717.00
Suspended Ceiling System with (Bevelled Tegular) EDGE
TILES WITH 15 mm Exposed GRID. The tiles should have
Humidity Resistance (RH) of 95% Light Reflectance 90%,
Thermal Conductivity K =0.052-0.057 w/m K, Colour White,
Fire Performance UK Class 0/Class 1 (BS 476 Part 6 & 7), in
module size of 600 x 600 x 15 mm with Anti Microbial
coating on the face of the tile, suitable for Green Building
application, with Recycled content of 34 % The tile shall be
laid on Silhouette profile grid system with 15 mm white/black
flanges incorporating a 6 mm central reveal in white/black
colour and with a web height of 45mm and a load carrying
capacity of minimum 15.68 Kgs/M2 & minimum pull out
strength of 100 kgs. Silhouette, Main Runners & Cross Tees
to have mitred ends & "birdsmouth" notches to provide
mitred cruciform junctions.
The T Sections have a Galvanizing of 90 grams per M2 and
need to be installed with suspension system of make. The
Tile & Grid system used together should carry a 10 year
warranty. INSTALLATION :- To comprise main runner
spaced at 1200 mm centres securely fixed to the structural
soffit using suspension system (Specifications below) at
1200mm maximum centre. The First/Last suspension system
at the end of each main runner should not be greater than 450
mm from the adjacent wall. Flush fitting 1200 mm long cross
tees to be interlocked between main runners at 600 mm
centre to form 1200 x 600 mm module. Cut cross tees longer
than 600mm require independent support. 600 x 600 mm
module to be formed by fitting 600 mm long flush fitting
cross tees centrally between
BSR_B10 [118]
Chapter
Code No
1 2 3 4
the 1200 mm cross tees. Perimeter trim to be wall angles of
size 3000 x 19 x 19mm, secured to walls at 450 mm
maximum centres. SUSPENSION SYSTEM accessories
consisting of M6 Anchor Fasteners with Vertical Hangers
made of Galvanised steel of size 26 x 26x 25x1.2 mm with a
Galvanised Thickness of 80 gsm, A pre Straightened Hanger
wire of dia-2.5 mm of 1.8 m length., thickness of 80 gsm and
a tensile strength of 344-413 MPa, along with Adjustable
hook clips of 0.8 mm thick, galvanised spring steel for 2.68
mm with a minimum pull strength of 110 kg. The adjustable
clip also consists of a 3.5 mm aquiline wire to be used with
the main runner.
10.37 Providing & Fixing of Mineral Fibre Acoustical Suspended Mtr 1627.00
Ceiling System with (Bevelled Tegular) EDGE TILES WITH
15 mm Exposed GRID. The tiles should have Humidity
Resistance (RH) of 99% NRC 0.5, Light Reflectance _>85%,
Thermal Conductivity K =0.052-0.057 w/m K, Colour White,
Fire Performance UK Class 0/Class 1 (BS 476 Part 6 & 7), in
module size of 600 x 600 x 16 mm, suitable for Green
Building application, with Recycled content of 32 %. The tile
shall be laid on Silhouette profile grid system with 15 mm
white/black flanges incorporating a 6 mm central reveal in
white/black colour and with a web height of 45mm and a
load carrying capacity of minimum 15.68 Kgs/Sqm minimum
pull out strength of 100 kgs. Silhouette,
Main Runners & Cross Tees to have mitred ends &
"birdsmouth" notches to provide mitred cruciform junctions.
The T Sections have a Galvanizing of 90 grams per sqm and
need to be installed with suspension system of make. The
Tile & Grid system used together should carry a 30 year
warranty. INSTALLATION :- To comprise main runner
spaced at 1200 mm centres securely fixed to the structural
soffit using suspension system (Specifications below) at
1200mm maximum centre. The First/Last suspension system
at the end of each main runner should not be greater than 450
mm from the adjacent wall. Flush fitting 1200 mm long cross
tees to be interlocked between main runners at 600 mm
centre to form 1200 x 600 mm module. Cut cross tees longer
BSR_B10 [119]
Chapter
Code No
1 2 3 4
than 600mm require independent support. 600 x 600 mm
module to be formed by fitting 600 mm long flush fitting
cross tees centrally between the 1200 mm cross tees.
Perimeter trim to be wall angles of size 3000 x 19 x 19mm,
secured to walls at 450 mm maximum centers.
SUSPENSION SYSTEM consisting of M6 Anchor Fasteners
with Vertical Hangers made of Galvanised steel of size 26 x
26x 25x1.2 mm with a Galvanised Thickness of 80 gsm, A
pre Straightened Hanger wire of dia-2.5 mm of 1.8 m length.,
thickness of 80 gsm and a tensile strength of 344-413 MPa,
along with Adjustable hook clips of 0.8 mm thick, galvanised
spring steel for 2.68 mm with a minimum pull strength of 110
kg. The adjustable clip also consists of a 3.5 mm aquiline
wire to be used with the main runner.
10.38 Providing and fixing 300C Aluminium Panel with perforation Sqm 4745.00
of 2mm diameter and 5mm centre to centre to give 15% open
area with Non woven textile False Ceiling system of
approved colour consisting of Panel 300 mm wide X 30 mm
deep X 0.7 mm thick with bevelled edges having panel length
upto 6 mtrs, Coil Coated on a Continuous Paint Line, Double
baked and roll formed for higher strength and good roll
forming characteristics. The panel ends will be raised upto
29mm. Panel shall be clipped to a baked enamelled
aluminium panel carrier of 41.5mm wide x 62mm deep x
0.95 mm thick in standard length of 5 mtrs. made of double
baked stove enamelled aluminium magnesium alloy AA3005
black with cut outs to hold the panels. The Carrier shall be
suspended by means of G.I. threaded rod of 6-mm diameter
directly fixed to the Carrier. The Carrier tabs to be bent down
to secure the panels at all Panel Carrier intersections. The
panels will be installed in a module of 300MM. (Tensile
strength of suspension-344/413 mpa and fastner strength-
110kg) All Ceiling Panels shall adhere to GreenPro
Certifications.
10.39 Providing and fixing of perforated Metal Tile Ceiling System Sqm 3775.00
comprising of Tile of 600mm wide and 600mm long
manufactured out of 0.7mm thick aluminium alloy 3105
with beveled edge of 4.15mm width height of 32mm. The
tiles shall be perforated to 1.5mm dia with open area of 23%.
The Tile will be manufactured on advanced includes several
leveling stages in the manufacturing process by approved
manufacturers. Tile ends will be raised with pips and slops
to ensure positive engagement into the spring to enable for
de-mounting of individual panels. The Tile sides will be
sufficiently high to ensure a minimum defl
BSR_B10 [120]
Chapter
Code No
1 2 3 4
ection across the length of Tile. All Tiles will be bevel
edged. The Tile shall be epoxy polyester powder coating in
white colour. The Tile shall be cllpped into clip in rail of
0.5mm thick GI. in form of a grid system using a cross
connector. The clip in rail shall be supported from slab by
means of rigid Suspension of 4mm G .I rod, Hold on Clamp
with Clip. POWDER COATING SPECIFICATION:
Aluminium PANELS, cleaned through eco friendly cleaning
,process and powder applied through electrostatic charged
Automatic Carona technology spray guns and cured in
combination of Infrared & hot air oven in a certified plant as
Akzo International approved applicator .
The powder is conforming with the performance

requirements of the AAMA2603.02 & Qualicoat Claa 1
specifications.
The coating thickness will be minimum 60 microns with
properties of Salt Spray of 1500 hrs in exposure in SST
Cabinet with Minimum blister rating 8.
(Tensile strength of suspension-344/413 mpa and fastner
strength-110kg)
All Ceiling Panels shall adhere to GreenPro Certifications.
10.40 Providing and fixing of Un-perforated Metal Tile Ceiling Sqm 3186.00
System comprising of Tile of 600mm wide and 600mm
long manufactured out of 0.7mm thick aluminium alloy
3105 with beveled edge of 4.15mm width height of 32mm.
The Tile will be manufactured on advanced equipment that
includes several leveling stages in the manufacturing process
by approved manufacturers . Tile ends will be raised with
pips and slops to ensure positive engagement into the spring
to enable for de-mounting of individual panels. The Tile
sides will be sufficiently high to ensure a minimum
deflection across the length of Tile. All Tiles will be bevel
edged. The Tile shall be epoxy polyester powder coating
with in white colour. The Tile shall be cllpped into clip in
rail of 0.5mm thick GI. in form of a grid system using a cross
connector. The clip in rail shall be supported from slab by
means of rigid Suspension of 4mm G .I rod, Hold on Clamp
with Clip. POWDER COATING SPECIFICATION:
Aluminium PANELS, cleaned through eco friendly cleaning
,process and powder applied through electrostatic charged
Automatic Carona technology spray guns and cured in
combination of Infrared & hot air oven in a certified plant as
BSR_B10 [121]
Chapter
Code No
1 2 3 4
specifications. The coating thickness will be minimum 60
microns with properties of Salt Spray of 1500 hrs in exposure
in SST Cabinet with Minimum blister rating 8. (Tensile
Certifications.
10.41 Providing and fixing of Un perforated Antibacterial Metal Sqm 4117.00

Tile Ceiling System comprising of Tile of 600mm wide and
600mm long manufactured out of 0.7mm thick aluminium
alloy 3105 with beveled edge of 4.15mm width height of
32mm. The Tile will be manufactured on advanced
equipment that includes several leveling stages in the
manufacturing process by approved manufacturers. Tile ends
will be raised with pips and slops to ensure positive
engagement into the spring to enable for de-mounting of
individual panels. The Tile sides will be sufficiently high to
ensure a minimum deflection across the length of Tile. All
Tiles will be bevel edged. The Tile shall be epoxy polyester
powder coating with ANTIBAC in white colour which is in
compliant to ROHS directive.
The Tile shall be cllpped into clip in rail of 0.5mm thick GI.
in form of a grid system using a cross connector. The clip in
rail shall be supported from slab by means of rigid
Suspension of 4mm G .I rod, Hold on Clamp with Clip.
POWDER COATING SPECIFICATION: Aluminium
PANELS, cleaned through eco friendly cleaning ,process and
powder applied through electrostatic charged Automatic
Carona technology spray guns and cured in combination of
Infrared & hot air oven in a certified plant as Akzo
International approved applicator . The powder is
conforming with the performance requirements of the
AAMA2603.02 & Qualicoat Claa 1 specifications.
The coating thickness will be minimum 60 microns with
properties of Salt Spray of 1500 hrs in exposure in SST
Cabinet with Minimum blister rating 8.
strength-110kg)
BSR_B10 [122]
Chapter
Code No
1 2 3 4
10.42 Providing and fixing of Perforated Metal Tile Ceiling System Sqm 3375.00
comprising of Tile of 600mm wide and 600mm long
manufactured out of 0.5mm thick Galvanised Iron with
beveled edge of 4.15mm width height of 32mm. The tiles
shall be perforated to 1.5mm dia with open area of 23%. The
Tile will be manufactured on advanced equipment that
includes several leveling stages in the manufacturing process
by approved manufacturers. Tile ends will be raised with
pips and slops to ensure positive engagement into the spring
to enable for de-mounting of individual panels. The Tile
sides will be sufficiently high to ensure a minimum
deflection across the length of Tile.
All Tiles will be bevel edged. The Tile shall be epoxy
polyester powder coating in white colour. The Tile shall be
cllpped into clip in rail of 0.5mm thick GI. in form of a grid
system using a cross connector. The clip in rail shall be
supported from slab by means of rigid Suspension of 4mm G
.I rod, Hold on Clamp with Clip. POWDER COATING
SPECIFICATION: Aluminium PANELS, cleaned through
eco friendly cleaning ,process and powder applied thru
electrostatic charged Automatic Carona technology spray
guns and cured in combination of Infrared & hot air oven in a
certified plant as Akzo International approved applicator .

Certifications.
BSR_B10 [123]
Chapter
Code No
1 2 3 4
10.43 Providing and fixing of Unperforated Metal Tile Ceiling Sqm 2544.00
System comprising of Tile of 600mm wide and 600mm
long manufactured out of 0.5mm thick Galvanised Iron with
beveled edge of 4.15mm width height of 32mm. The tiles
shall be plain. The Tile will be manufactured on advanced
equipment that includes several leveling stages in the
manufacturing process by approved manufacturers. Tile ends
will be raised with pips and slops to ensure positive
engagement into the spring to enable for de-mounting of
individual panels. The Tile sides will be sufficiently high to
ensure a minimum deflection across the length of Tile. All
Tiles will be bevel edged. The Tile shall be epoxy polyester
powder coating in white colour. The Tile shall be cllpped
into clip in rail of 0.5mm thick GI. in form of a grid system
using a cross connector. The clip in rail shall be supported
from slab by means of rigid Suspension of 4mm G .I rod,
Hold on Clamp with Clip. POWDER COATING
SPECIFICATION: Aluminium PANELS, cleaned through
eco friendly cleaning ,process and powder applied through
electrostatic
The powder charged
is Automatic
conformingCarona
withtechnology spray
the performance
Certifications.
10.44 Supply & Fixing of torsion spring Plank Ceiling System, Sqm 5253.00
comprising of Plank of 600mm wide and 1200mm long
manufactured out of 0.7mm thick Aluminium Alloy 3105
perforated 1.5mm dia With 22% open area. The metal ceiling
panels shall be downward accessible with a minimum of four
(4) torsion springs per panel . The Plank will be
manufactured on advanced CAD/CAM equipment that
includes several levelling stages in the manufacturing
process. Torsion Spring panel with two side legs die formed
and two end legs die formed and punched to receive torsion
springs (min two springs each end or side) for secure
engagement into Tee Grid main runners which are factory
punched to receive torsion springs. Planks will be square
edged. The metal ceiling panels shall be downward
accessible with a minimum of four (4) torsion springs per
panel.
BSR_B10 [124]
Chapter
Code No
1 2 3 4
The Plank shall be Polyester powder coated in desired colour.
Main Runners: 24mm deep, inverted “Tee” sections, 3.6m
long, with factory punched flanges to receive torsion spring
assembly. Main Tee on center spacing to match panel length.
Cross Runners: 24 mm deep, inverted “Tee” sections
designed to interlock in to web of main tee section on
designated spacing. Cross tee length to match panel length.
Cross tees are spaced spacing 1200mm on center maximum.
Suspension System:
As per manufacturer standard considering type of plenum and
its height. Paint finish –
powder applied through electrostatic charged Automatic
Carona technology spray guns and cured in combination of
Infrared & hot air oven in a certified plant as Akzo
International approved applicator . The powder is conforming
with the performance requirements of the AAMA2603.02 &
Qualicoat Claa 1 specifications. The coating thickness will be
minimum 60 microns with properties of Salt Spray of 1500
hrs in exposure in SST Cabinet with Minimum blister rating 8
Acoustic Felt (Optional): Non-woven felt made of glass-
reinforced fibre glued over the perforation for sound
absorption. NRC- 0.7.
strength-110kg)
manufactured out of 0.7mm thick Aluminium Alloy 3105
engagement into Tee Grid main runners which are factory
punched to receive torsion springs. Planks will be square
edged. The metal ceiling panels shall be downward
accessible with a minimum of four (4) torsion springs per
panel. The Plank shall be Polyester powder coated in desired
colour. Main Runners: 24mm deep, inverted “Tee” sections,
3.6m long,
BSR_B10 [125]
Chapter
Code No
1 2 3 4
with factory punched flanges to receive torsion spring
assembly. Main Tee on center spacing to match panel length.
Cross Runners: 24 mm deep, inverted “Tee” sections
designed to interlock in to web of main tee section on
designated spacing. Cross tee length to match panel length.
Cross tees are spaced spacing 1200mm on center maximum.
Suspension System: As per manufacturer standard
considering type of plenum and its height. Paint finish –
powder applied thru electrostatic charged Automatic Carona
technology spray guns and cured in combination of Infrared
& hot air oven in a certified plant as Akzo International
approved applicator . The powder is conforming with the
performance requirements of the AAMA2603.02 &
hrs in exposure in SST Cabinet with Minimum blister rating
8. Acoustic Felt (Optional): Non-woven felt made of glass-
absorption. NRC- 0.7. (Tensile strength of suspension-
344/413 mpa and fastner strength-110kg)
manufactured out of 0.6mm thick GALVANISED IRON
engagement into
BSR_B10 [126]
Chapter
Code No
1 2 3 4
Tee Grid main runners which are factory punched to receive
torsion springs. Planks will be square edged. The metal
ceiling panels shall be downward accessible with a minimum
of four (4) torsion springs per panel. The Plank shall be
Polyester powder coated in desired colour. Main Runners:
24mm deep, inverted “Tee” sections, 3.6m long, with factory
punched flanges to receive torsion spring assembly. Main Tee
on center spacing to match panel length. Cross Runners: 24
mm deep, inverted “Tee” sections designed to interlock in to
web of main tee section on designated spacing. Cross tee
length to match panel length. Cross tees are spaced spacing
1200mm on center maximum.
Suspension System: As per manufacturer standard
considering type of plenum and its height. Paint finish –
powder applied thru electrostatic charged Automatic Carona
technology spray guns and cured in combination of Infrared
& hot air oven in a certified plant as Akzo International
approved applicator . The powder is conforming with the
performance requirements of the AAMA2603.02 &
hrs in exposure in SST Cabinet with Minimum blister rating
8. Acoustic Felt (Optional): Non-woven felt made of glass-
absorption. NRC- 0.7. (Tensile strength of suspension-
344/413 mpa and fastner strength-110kg)
10.47 Providing and installation of Poly Carbonate Sheet roofing

over existing steel framing as per drawing and design
including fixing with non-corrodible nuts and water proof
washers as per instruction of Engineer-in-charge.
(i) 6 mm thick Sqm 1447.00
(ii) 10 mm thick Sqm 1914.00
BSR_B10 [127]
CHAPTER : B-11
FLOORING WORKS
Chapter
Code No
1 2 3 4
BRICK FLOORING
11.1 Brick on edge flooring with bricks of class designation 75
including cement slurry & pointing in CM (1 : 3) etc.
complete laid on 20 mm thick bed of :
11.1.1 Cement Sand Mortar 1 : 4 Sqm 510.00
11.1.2 Cement Sand Mortar 1 : 6 Sqm 487.00
11.2 Dry brick on edge flooring in required pattern with bricks of Sqm 450.00
class designation 75 on a bed of 12 mm mud mortar including
filling joints with River sand complete.
CEMENT CONCRETE FLOORING
11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate) finished with a floating coat of neat
cement including cement slurry, making of lines or groove etc
complete but excluding the cost of nosing of steps etc.
complete.
11.3.1 40mm thick with 20mm thick nominal size aggregate. Sqm 277.00
11.3.2 75mm thick with 20mm thick nominal size aggregate. Sqm 458.00
11.4 Providing and fixing 50mm thick cement concrete flooring Sqm 453.00
with Metallic concrete hardener topping, under layer of 38mm
thick cement concrete 1:2:4 (1-cement : 2-coarse sand : 4-
graded stone aggregate 20mm thick nominal size) and top
layer of 12mm thick metallic concrete hardener consisting of
mix 1:2 (1 cement : 2 stone aggregate, 6mm nominal size) by
volume & mixed with metallic hardening compound of
approved quality @ 2Kg./Sqm including cement slurry,
rounding off edges etc. but excluding the cost of nosing of step
etc. complete.
11.5 Cement plaster in skirting and/dado 18 mm thick with cement Sqm 284.00
mortar 1:3 (1 cement : 3 course sand) finished with a floating
coat of neat cement including rounding of junctions with floor
.
BSR_B11 [128]
Chapter
Code No
1 2 3 4
TERRAZZO FLOORING
11.6 40mm thick marble chips flooring rubbed and polished to granolithic
finish under layer 31mm thick cement concrete 1:2:4 (1 cement : 2
course sand : 4 graded stone aggregate 12.5mm nominal size)
including fixing of dividing strip (excluding the cost of strips) and
top layer 9mm thick with marble chips of approved colour & 4mm to
7mm nominal size laid in cement marble chips 2 : 3 (2 cement : 3
marble chips) by volume including cement slurry etc. complete
11.6.1 Dark shade pigment with ordinary cement. Sqm 485.00
11.6.2 Light shade pigment with ordinary cement. Sqm 707.00
11.6.3 Medium shade pigment with approximately 50% white cement Sqm 539.00
and 50% ordinary cement.
11.6.4 White cement without any pigment. Sqm 520.00
11.6.5 Light shade pigment with white cement. Sqm 476.00
11.6.6 Ordinary cement without any pigment. Sqm 450.00
11.7 40mm thick marble chips flooring rubbed and polished to granolithic
finish under layer 28mm thick cement concrete 1:2:4 (1 cement : 2
course sand : 4 graded stone aggregate 12.5mm nominal size)
including fixing of dividing strip (excluding the cost of strips) and
top layer 12mm thick with marble chips of approved colour 7mm to
10mm nominal size laid in cement marble chips mix by weight in
proportion of 2 : 3 (2 cement : 3 marble chips) by volume including
cement slurry etc. complete :
11.8 Marble chips skirting/dado rubbed and polished to granolithic finish

6mm thick with white marble chips of approved colour and size from
smallest to 4mm nominal size laid in cement marble chips mix in
proportion of 4:7(4 cement : 7 marble chips) by volume including
fixing of dividing strips (excluding the cost of strips) complete in all
respects : 18mm thick with under layer of 12mm thick cement
plaster 1:3 (1 cement : 3 coarse sand) :
BSR_B11 [129]
Chapter
Code No
1 2 3 4
11.9 Providing and fixing glass strips in joints of terrazo/ cement

concrete floors.
11.9.1 40mm wide and 4mm thick Mtr. 31.00
11.9.2 20mm wide and 3mm thick for skirting. Mtr. 17.00
11.10 Extra for laying terrazo flooring on staircase treads not exceeding 30 Sqm 26.00
cm in width including cost of forming, nosing etc.
11.11 Extra for terrazzo flooring in narrow band bands not Sqm 14.00
exceeding 7.5cm in width.
11.12 Crazy marble stone flooring 20mm thick marble stone with Sqm 579.00
black or of specified colour topping including filling the gaps
with cement marble chips mix in proportion of 4 : 7 (4cement
: 7 white black or white or black marble chips) size from 1mm
to 4mm by volume and under layer of 25mm thick cement
concrete [1:2:4, graded stone aggregate 12.5mm nominal size]
rubbing and polishing and cement slurry etc. complete :
In ordinary cement.
TILE FLOORING
11.13 Precast terrazo tiles of approved make, 20mm thick with

marble chips of size upto 6mm laid in floors, and landing,
jointed with neat cement slurry mixed with pigment to match
the shade of the tiles, including rubbing and polishing
complete on 20mm thick bed of cement sand mortar 1 : 4.
11.13.1 Light shade using white cement. Sqm 542.00
11.13.2 Medium shade using approximately 50% white cement and Sqm 549.00
50% ordinary cement.
11.13.3 Dark shade using ordinary cement. Sqm 473.00
11.14 Extra if terrazo tiles are laid in treads of steps not exceeding Sqm 32.00
30 cm in width.
BSR_B11 [130]
Chapter
Code No
1 2 3 4
11.15 Precast terrazzo tiles of approved make 20mm thick with
marble chips of size upto 6mm in skirting & risers, treads of
steps and dados 12mm thick cement plaster 1:3 (1 cement : 3
coarse sand) jointed with neat cement slurry mixed with
pigment to match the shade of the tiles, including rubbing and
polishing complete with tiles of :
11.15.1 Light shade using white cement. Sqm 690.00

11.16 Providing & laying Chequered terrazzo tiles of approved make

22mm thick with marble chips of size upto 6mm, in floors,
jointed with neat cement slurry mixed wit pigment to match
the shade of tiles including rubbing and polishing complete in
all respect as per specification, on 28mm thick bed of C.M. 1:4
:
11.16.1 Light shade using shade cement. Sqm 684.00

11.16.5 Add extra for non slipping 9-12 mm ironite topping tiles Sqm 10%
11.17 Chequerred precast cement concrete tiles 22 mm thick in

footpath & courtyard jointed with neat cement slurry mixed
with pigment to match the shade of tiles including rubbing
and cleaning etc. complete on 20 mm thick bed of cement
mortar 1:4 (1 cement : 4 coarse sand)
11.17.1 Light shade using shade cement. Sqm 571.00

11.17.5 Add Extra for polished chequered precast cement concrete 10%
tiles over item No. 11.17.1, 11.17.2, 11.17.3, 11.17.4
BSR_B11 [131]
Chapter
Code No
1 2 3 4
KOTA STONE FLOORING
11.18 Kota stone slab flooring 25 mm thick over 20 mm (average)

thick base laid over and jointed with grey cement slurry
mixed with pigment to match the shade of the slab including
rubbing and polishing complete with base of cement mortar 1
: 4 (1 cement : 4 coarse sand)
11.18.1 For area of each slab from 901 to 2000 Sq.Cm : Sqm 950.00
11.18.2 For area of each slab from 2001 to 5000 Sq.Cm Sqm 1023.00
11.19 Kota stone slabs 25 mm thick in risers of steps, skirting, dado

and pillars laid on 12 mm (average) thick cement mortar 1:3 (1
cement 3 coarse sand) and jointed with grey cement slurry
mixed with pigment to match the shade of the slabs, including
rubbing and polishing complete
11.19.1 For area of each slab upto 2001 Sqcm Sqm 912.00
11.19.2 For area of each slab from 2001 to 5000 Sqcm Sqm 1002.00
11.20 Rough Chisel dressed Kota stone 35 mm thick flooring of approved Sqm 627.00
shade set in pattern over 20mm thick base of cement mortar 1:6 (1
cement : 6 coarse sand) and pointing with cement sand mortar 1:3
with pigment to match the shade of stone with joint thickness up to
15 mm complete in all respects :
SAND STONE FLOORING
11.21 Rough Chisel dressed Sand stone 35 mm thick flooring of

approved shade set over 20mm thick base of cement mortar
1:6 (1 cement : 6 coarse sand) and pointing with cement sand
mortar 1:3 with pigment to match the shade of stone with joint
thickness up to 15 mm complete in all respects :
11.21.1 Red sand stone (Karauli stone) Sqm 619.00
11.21.2 Pink sand stone (Bansi Paharpur stone) Sqm 653.00
11.21.3 Mandana stone Sqm 653.00
11.22 Fine dressed & machine cut edges 30-35 mm thicksand stone
flooring over 20 mm (average) thick base of cement mortar
1:4 (1 cement : 4 coarse sand) jointed grey cement slurry
mixed with pigment to match the shade of stone complete as
per design drawing and instruction of EI.
BSR_B11 [132]
Chapter
Code No
1 2 3 4
11.23 Fine grinded Gangsaw cut 30-35 mm thick stone flooring over
20 mm (average) thick base of cement mortar 1:4 (1 cement :4
coarse sand) jointed grey cement slurry mixed with pigment to
match the shade of stone complete as per design drawing and
instruction of EI.
11.24 Extra for pre finished nosing in treads of steps of Kota stone/ Sqm 72.00
sand stone slab.
11.25 Extra for Mirror polishing on terrazzo/Kota stone work where Sqm 121.00
ever required to give high gloss finish complete.
11.26 Random rubble dry stone Kharanja under floor. Cum 932.00
11.27 Filling of sunk portion of roof with earthen pots of required Cum 1775.00
height including filling voids with 1:3:6 light concrete, using
brick bats complete levelling and dressing the surface by
50mm thick cement concrete 1:2:4 as per specification.
11.28 Providing and fixing designer cement concrete polished tiles Sqm 1180.00
over 20mm average thick base of CM 1 :4 (1 Cement : 4 sand)
jointing with cement mortar 1 :2 ( 1cement : 2 sand) with
pigment to match the shade of the tiles having minimum
thickness of 25mm complete with all respect. ( as per IS
1237:2012)
11.29 Providing and laying at or near ground level factory made kerb Cum 6103.00
stone of M-25 grade cement in position to the required line,
level and curvature jointed with cement mortar 1:3 (1 cement :
3 coarse sand ) including making joints with without grooves
(thickness of joints except at sharp curve shall not to more
than 5mm) including making drainage opening wherever
required complete including painting etc. as per direction of
Engineer-in-charge (length of finished kerb edging shall be
measured for payment). (Precast C.C. kerb stone shall be
approved by Engineerin- charge).
BSR_B11 [133]
Chapter
Code No
1 2 3 4
11.30 Providing and laying M30 grade controlled cement concrete Cum 5514.00
pavements including mixing and vibrations concrete with
necessary needle vibrators and surface with screed board
vibrating complete in all respect with 20/25 mm stone
aggregate (crusher broken) including anti-skid textured finish
to required camber/ super elevation and grade including
curing etc. as per specification with cement concrete M-30
grade including cost of Steel frame work for sides of C.C.
pavement consisting of M. S. channels flats and angles with
required steel pegs ( some of them may left embedded in
concrete/ including providing frame work)
11.31 Extra for vacuum processed concrete including cost of Sqm.. 101.00
equipments labour etc.
11.32 Cutting of construction joint/ longitudinal joint 4 to 6 mm.

wide using mechanical concrete cutter including cost of
diamond bit cutting wheel and filling of bitumen sealing
compound in groove including cost of sealing compound.
11.32.1 25 mm depth P Mtr. 46.00
11.32.2 50 mm depth P Mtr. 94.00
11.32.3 75 mm depth P Mtr. 140.00
11.32.4 100 mm depth P Mtr. 187.00
WOODEN FLOORING
11.33 25mm thick wooden planking, tongued and grooved in Sqm 2973.00
flooring including fixing with iron screws complete (Lower
frame to be paid extra) with :First class Teak wood.
11.34 Providing and laying wooden flooring with a direct laminated Sqm 2311.00
surface treated with aluminum oxide on top of a high-density
fiber board with a density of 850 Kg./per Mtr. having a click
system tongue and groove joint to secure a long lasting joint.
The planks are or termite resistant and water protected with
both side lamination Wooden flooring Planks of size 1208 x
194 x 8 mm / 1215x294x8 mm (8mm thick laminated floor
class of use 23/31 having a wear resistance level of AC-3 ,
impact resistance > 9mm, moisture resistance 3-10% as per
(EN-424, EN – 438 EN – 425 EN – 417 – 2)or PREN 3329
complete in all respect as per direction of EI
BSR_B11 [134]
Chapter
Code No
1 2 3 4
11.35 Providing and laying of skirting 89 mm wide having both side Rm 979.00
laminations with moulding in upper side with matching of
floor fixing with nails and screws & fevicol complete in all
respect as per direction of EI.
11.36 Providing and laying transaction/adaptation profile with fixing Rm 906.00

of nails, screws & fevicol complete in all respect as per
direction of EI.
PVC FLOORING
11.37 Providing and Fixing Cushion Vinyl/Fully flexible Vinyl

Flooring confirming to I.S.-3462 Flooring of approved make
with fibre base using rubber base adhesives including rolling
with light wooden roller complete :
11.37.1 1.0 mm thick. Sqm 760.00

11.37.2 1.5 mm thick. Sqm 867.00
11.37.3 2.0 mm thick. Sqm 990.00
Paver Block
11.38 Providing and laying of paver block as per IS 15658 : 2006

(Indian standard for precast concrete block for paving-
specification) and IRC : SP:63-2004 (guidelines for the use of
interlocking concrete block pavement)
11.38.1 M-30, 60 mm thick to be used in non traffic areas like building
premises, monument premises, land scapes, public gardens/
park, domestic drives, paths and patios, Embankment slopes,
sand stabilization Area etc.( As per table 1 of IS 15658:2006
(A) Category A Denated units to key into each other on four faces Sqm 816.00
zigzag shape as per IRC SP 63:2004
(B) Category „B‟ Denated only two side like I,Z,T shape etc. as Sqm 786.00
per IRC SP 63:2004

(C) Category „C‟not denated on any it‟s faces like Hexagon, Sqm 736.00
Rectangular, square shape as per IRC SP 63:2004
BSR_B11 [135]
Chapter
Code No
1 2 3 4
11.38.2 M-35,60mm thick to be used in light traffic (Light traffic is
defined as a daily traffic up to 150 commercial vehicles
exceeding 30 KN laden weight, or an equivalent up to 0.5
million standard axles (MSA) for a design life of 20 years (A
standard axle is defined as a single axle load of 81.6 KN) like
pedestrian plazas, shopping complexes ramps, car parks, office
driveways , housing colonies, office complexes, rural roads
with low volume traffic, farm houses , beach sites, tourist
resorts, local authority footways, residential roads, etc.
per IRC SP 63:2004
11.38.3 M-40,80mm thick to be used in medium- traffic ( Medium

traffic is defined as a daily traffic of 150-450 commercial
vehicles exceeding 30 KN laden weight, or an equivalent of
0.5 to 2.0 MSA for a design life of 20 years.) like city streets,
small and medium market roads, low volume roads, utility cuts
on arterial roads, etc
per IRC SP 63:2004
11.38.4 M-50 100mm thick to be used in heavy-traffic ( Heavy traffic

is defined as a daily traffic of 450-1500 commercial vehicles
exceeding 30 KN laden weight, or an equivalent of 2.0 to 5.0
MSA for a design life of 20 years.) like Bus terminals,
industrial complexes, mandi houses roads on expansive soils,
factory floor , service station, industrial pavements.etc.
per IRC SP 63:2004
BSR_B11 [136]
Chapter
Code No
1 2 3 4
11.38.5 M-55 120mm thick to be used in very heavy-traffic ( very
heavy-traffic is defined as a daily traffic of more than 1500
commercial vehicle exceeding 30 KN laden weight, or an
equivalent of more than 5.0 MSA for a design life of 20 years.)
like container terminals, ports, block yards, mine access roads,
bulk cargo handling areas, airport pavements, etc.
per IRC SP 63:2004
11.39 Add extra over item No. 11.38, A to C if reflective paver Sqm 10%
block, manufactured with wet cast vibration system in two
layers is used.
11.40 Add extra over rates of item No. 11.38, A to C if colored Sqm 20%
paver blocks are used
11.41 Providing and fixing 25 mm thick Non slippery reflective type

designer paving tile with metallic hardening using 2 Kg/sq.mtr
made out of cement concrete of required grade, sizes of tile
upto 300X300 mm Manufactured with wet cast Vibration
system in two layers and laid over base of 20 mm thick cement
morter1:4 using neat cement slurry in cluding finishing of
joints etc. complete.
(A) Using M-40 grade cement Concrete Sqm 1509.00
(B) Using M-30 grade cement Concrete Sqm 1368.00
11.42 Add extra over 11.41, A & B if coloured wearing course (as Sqm 20%
per IS 1237:1980) is used.
11.43 25mm thick fine dressed and machine grinded surface stone
flooring over 20mm (av.) thick base in cement in CM 1:6 with
joints finished flush with:
11.43.1 Red sand stone Sqm 513.00
11.43.2 White sand stone Sqm 624.00
BSR_B11 [137]
Chapter
Code No
1 2 3 4
11.44 Providing & Laying Tactile tile (for vision impaired persons is Sqm 1284.00
standard of size 300x300x20mm and confirming to IS 1231 of
1980 (Re affirmed in 2006) in all colours & sheds further
product should confirm ASTM 303 for shad resistance and
DIN51099 for colour fastness etc. laid on 20mm thick base of
cement mortar 1:4 (1 cement : 4 course sand) in all shapes &
patterns including grouting the joint which white cement
mixer) will matching pigments etc complete is per direction of
Engineer-in-charges. Grade M 30
BSR_B11 [138]
CHAPTER : B-12
FINISHING WORK
Note :
1 The rates are for complete work including racking of joints,
curing, grinding, mixing and finishing T & P and scaffolding
material and cost of material with all lead and lift
2 The rates cover protection of all places and things, requiring
protection and cleaning such places and thing of all droppings
and splashes of mortar etc.
3 The Rate for external plaster are for height up to 10 m from
ground level unless otherwise stated.
4 Cement mortar is to be made by mechnical mixer only.
Chapter
Code No
1 2 3 4
CEMENT PLASTER
12.1 Plaster on new surface on wall in cement sand mortar 1:3

including racking of joints etc. complete fine finish :
12.1.1 25 mm thick Sqm. 242.00
12.1.2 20mm thick Sqm 211.00
12.1.3 12mm thick Sqm 164.00
12.2 Plaster on new surface on walls in cement sand mortar 1:4

including racking of joints etc. complete fine finish :
12.2.1 25 mm thick. Sqm 227.00
12.2.2 20mm thick . Sqm 202.00
12.2.3 12mm thick . Sqm 163.00

including racking of joint etc. complete fine finish :
12.3.1 25 mm thick Sqm 211.00
12.3.2 20mm thick. Sqm 190.00
12.3.3 12mm thick. Sqm 160.00

including racking of joint etc. complete fine finish :
12.4.1 25mm thick. Sqm 176.00
12.4.2 20mm thick. Sqm 164.00
12.4.3 12mm thick. Sqm 140.00
12.5 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3- Sqm. 139.00
fine sand)
BSR_B12 [139]
Chapter
Code No
1 2 3 4
12.6 6mm thick cement plaster 1:3 ( 1cement : 3 fine sand) finished Sqm. 163.00
with a floating coat of neat cement and thick coat of Lime
wash on top of walls when dry for bearing of R.C.C slabs and
beams.
12.7 Finishing with neat cement (punning). Sqm 36.00
12.8 Extra for providing and mixing water proofing material in Kg. 42.00
cement plaster work in proportion recommended by the
manufacturers.
ROUGH CAST PLASTER
12.9 Rough cast plaster upto 10m height above ground level with a Sqm 340.00
mixture of sand and gravel or crushed stone from 6mm to
10mm nominal size dashed over and including the fresh plaster
in two layers, under layer 12mm cement plaster 1:4 (1 cement
: 4 coarse sand) and top layer 10mm cement plaster 1:3 (1
cement : 3 fine sand) mixed with 10% finely grounded
hydrated lime by volume of cement.
Ordinary cement finish using ordinary cement
12.10 Pebble dash plaster upto 10m height above ground level with a Sqm 323.00
mixture of washed pebble or crushed stone 6mm to 12.5mm
nominal size dashed over and including fresh plaster in two
layers under layer 12mm cement plaster 1:4 (1 cement : 4
coarse sand) and top layer 10mm cement plaster with cement
mortar 1:3 (1 cement : 3 fine sand) with 10% finely grounded
hydrated lime by volume of cement
12.11 Washed stone grit plaster on exterior walls of height upto 10 Sqm 510.00
M. above level in two layers, under layer 12mm cement plaster
1:4 (1 cement : 4 coarse sand ) furrowing the under layer with
scratching tool, applying cement slurry on the under layer @
2kg of cement per sqm, top layer 15 mm cement plaster
1:1/2:2 ( 1 cement : 1/2 coarse sand : 2 stone chipping size 10
mm nominal size) in panel with groove all around as per
approved pattern including scrubbing and washing, the top
layer with brushes and water to expose the stone chipping,
complete as per specification and direction of Engineer in
charge. (Payment for providing grooves shall be made
separately)
BSR_B12 [140]
Chapter
Code No
1 2 3 4
12.12 Forming groove of uniform size 15x15mm and upto 25x15mm Rm 25.00
in the top layer of washed stone grit plaster as per approved
pattern using wooden battens, nailed to the under layer
including removal of wooden battens, repair to the edges of
panels and finishing the groove complete as per specification
and direction of Engineer in charge
12.13 Extra for using white cement in place of ordinary cement in Sqm 36.00
the top layer of the item of washed stone grit plaster.
12.14 Extra for plastering exterior walls of height more than 10 m Sqm 34.00
from ground level for every additional height of 3 m or part
thereof.
12.15 Extra for plastering on circular work not exceeding 6 m in Sqm 15.00
radius:
12.16 Extra for plastering done on moulding cornices or architraves

including neat finish to line and level:
12.16.1 In one coat Sqm 210.00
12.16.2 In two coats Sqm 348.00
12.17 Extra for plastering :

12.17.1 Spherical ceiling Sqm 64.00
12.17.2 Groined ceiling Sqm 70.00
12.17.3 Flewing soffits Sqm 42.00
12.18 Extra for lining out plaster to imitate stone or concrete blocks Sqm 34.00
walling
12.19 Making grooves as per design in plaster 10mm to 20mm wide. Rm 7.00
12.20 Making of drip course (Tapka) in cement sand mortar 1:6 Rm 11.00
width upto 40 mm and 10 mm thick as per approved design
12.21 12 mm thick plain cement mortar bands in cement mortar 1:4

(1 cement : 4 fine sand) :
12.21.1 Flush band. Cm P Rm 3.00
12.21.2 Sunk band. Cm P Rm 3.00
12.21.3 Raised Band Cm P Rm 3.00
12.21.4 Moulded band. Cm P Rm 5.00
BSR_B12 [141]
Chapter
Code No
1 2 3 4
12.22 Providing and applying white cement based putty over

plastered surface to prepare the surface even and smooth
complete
12.22.1 New Plastered Surface (three or more coats) Sqm 84.00
12.22.2 Old Plastered Surface (two or more coats) Sqm 46.00
12.23 Providing and applying plaster of paris putty of 2 mm Sqm 69.00

thickness over plastered surface to prepare the surface even
and smooth complete
12.24 Providing & Laying POP moulding & beading in ceiling

including nailing & scafollding etc. complete of size :
12.24.1 25mm x 12mm Rm 61.00
12.24.2 25mm x 25 mm Rm 72.00
12.25 Providing & Laying POP Cornice of required design &

pattern in ceiling including nailing & scafollding etc.
complete with fine finishing of size:
12.25.1 50mm x 50mm Rm 112.00
12.25.2 65mm x 65mm Rm 124.00
12.25.3 75mm x 75mm Rm 146.00
12.26 Lime plaster ( up to 40 mm thick in 3 Coats) on new surface Sqm 353.00

on walls with lime sand mortar 1:2 (1 lime putty : 2 sand)
using admixture like Gur, Methi & Gugal @ 1.0 Kg./each for
every 10 Sqm of area including racking of joints curing etc.
complete
12.27 Coloured Araish work 1 : 2 (1-lime putty : 2-Zikki ) over lime Sqm 3681.00
plaster or plain back ground including preparation of lime for
6 months by slaking of lime with curd and changing the water
every week. The kara plaster of not more than 6 mm thick is to
be left for maximum of 3 months to appear the shrinkage &
temperature cracks over the kara plaster 2 mm layer of grinded
lime putty is to be done and is to be rubbed gently by Akik
stone then inserting the design of colour border/
flowers/pictures etc including desired colour stone pigment to
match the existing design/pattern after this, applying Khopra
paste & rubbing with cloth to give a uniform picture. The work
to be executed strict as per direction of Engineer Incharge
BSR_B12 [142]
Chapter
Code No
1 2 3 4
12.28 Yellow/pink colour wash with Khameera mixed with pigment

including making gola garden, Kangoora and ornamental
lining work as per aprroved Jaipur style and pattern complete
in all respest as per direction of Engineer in Charge
12.28.1 On New Surface ( 3 coats) Sqm 88.00
12.28.2 On old Surface ( 3 coats) Sqm 48.00
12.29 Extra for making Ornamental design like Kangooras Gola Sqm 50%
etc. as per Jaipur practice in cement plaster
POINTING
12.30 Pointing on brick work or brick flooring with cement mortar

1:3 (1 cement : 3 fine sand) :
12.30.1 Flush / Ruled/ Struck or weathered pointing. Sqm 80.00

12.30.2 Raised and cut pointing Sqm 133.00
12.31 Pointing on stone masonry in cement sand mortar 1:3 (1

cement : 3 sand) :
12.31.1 Flush / Ruled/ Struck or weathered pointing. Sqm 124.00
12.31.2 Raised and cut pointing. Sqm 233.00
12.31.3 Deep groove pointing Sqm 220.00
12.32 Pointing on stone slab ceiling with cement mortar 1:2 (1 Sqm 78.00
cement : 2 fine sand):
Flush/ Ruled pointing
12.33 Extra for pointing on walls on the outside at height more than Sqm 4.00
10 m from ground level for every additional height of 3 m or
part there of.
INTERIOR FINISHING
12.34 White washing with lime to give an even shade including all
scaffolding:
12.34.1 New work (three or more coats). Sqm 11.00

12.34.2 Old work (two or more coats) including scrapping old surface Sqm 6.00
and repairing with whiting where ever necessary.
12.34.3 Old work (one or more coats) including scrapping old surface Sqm 3.00
and repairing with putty where ever necessary.
BSR_B12 [143]
Chapter
Code No
1 2 3 4
12.35 Colour washing of all shades to give an even shade including

all scaffolding :
12.35.1 New work (two or more coats) with a base coat of white Sqm 14.00
washing with lime.
12.35.2 New work (two or more coats) with a base coat of whiting. Sqm 15.00
12.35.3 Old work (one or more coats) with whiting with a base coat of Sqm 7.00
white washing including scrapping old surface.
12.35.4 Old work (two or more coats) with whiting with a base coat of Sqm 6.00
white washing including scrapping surface.
12.35.5 Old work (one or more coats) with lime including scrapping Sqm 4.00
surface.
12.35.6 Old work (one or more coats) with whiting including Sqm 4.00
scrapping surface.
12.35.7 Removing white or colour wash by scrapping and sand Sqm 4.00
papering and preparing the surface smooth including necessary
repairs to scratches by sandla/loi. (only for colour changing ).
12.36 Distempering with dry distemper of approved brand and shade Sqm 53.00
(two or more coats) and of required shade on new work, over
and including, priming coat of whiting to give an even shade
including all scaffolding.
12.37 Distempering with oil bound washable distemper of approved

brand and manufacture to give an even shade including all
scaffolding:
12.37.1 New work (two or more coats) over and including Sqm 75.00
scrapping and priming coat with cement primer.
12.37.2 Old work (one or more coats) including scrapping
surface and necessary repairs.
(a) Colour Change Sqm 15.00
(b) Same colour Sqm 11.00
12.37.3 Removing dry or oil bound distemper by scrapping sand Sqm 4.00
papering and preparing surface smooth including necessary
repairs to scratches by sandla/loi and all scaffolding (for
colour changing only)
12.38 Distempering with 1st quality acrylic washable distemper Sqm 43.00
(ready mixed) of approved manufacturer and of required shade
and colour completeincluding all scaffolding as per
manufacturer's specification.
Two or more coats on new work including prepartion of base
with primer, putty, lippy etc complete in all respect.
BSR_B12 [144]
Chapter
Code No
1 2 3 4
12.39 Applying one coat of Cement primer of approved brand and Sqm 14.00
manufacture on wall surface including all scaffolding:
12.40 Wall painting with plastic emulsion paint of approved brand

and manufacture to give an even shade including all
scaffolding:
12.40.1 Two or more coats on new work including prepartion of base Sqm 80.00
with primer, putty, lippy etc complete in all respect.
12.40.2 Old work (One or more coats ) Sqm 40.00
EXTERIOR FINISHING
12.41 Finishing wall with water proofing cement paint of approved

brand and manufacture and or required shade to give an even
shade including all scaffolding:
12.41.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). Sqm 53.00
12.41.2 Old work (One or more coats). Sqm 20.00
12.42 Finishing walls with Acrylic Smooth exterior paint of required Sqm 86.00
shade including all scaffolding.
New work (Two or more coat applied @ 1.67 ltr/10 sqm over
and including base coat of water proofing cement paint applied
@ 2.20 kg/ 10 sqm ).
12.43 Painting exterior surface of Wall with 100% acrylic exterior

paint of approved brand and manufacture to give an even
shade with two or more coats including prepartion of base
with sand papering, primer, putty, etc complete in all respect
including scaffolding and safety provision
12.43.1 New Work Sqm 123.00

12.43.2 Old Work Sqm 50.00
12.44 Finishing walls with textured exterior paint of required shade

as per approved colour complete as per manufacturers
specifications including primer coat and protecting coat
including scaffolding and safety provision
12.44.1 Roller Finish av. thickness 400 to 500 microns. Sqm 171.00
12.44.2 Trowel Finish av. thickness 1000 to 1200 microns. Sqm 347.00
BSR_B12 [145]
Chapter
Code No
1 2 3 4
PAINTING
12.45 Applying priming coat :

12.45.1 With ready mix pink or gray primer of approved brand and Sqm 29.00
manufacture on wood work hard and soft wood.
12.45.2 With ready mix Aluminium primer of approved brand and Sqm 29.00
manufacture on resinous wood and plywood.
12.45.3 With ready mixed red oxide zinc chromate primer of approved Sqm 23.00
brand and manufacture on steel galvanised iron/steel works

12.45.4 With ready mixed red oxide zinc chromate primer of approved Sqm 12.00
brand and manufacture on steel work (second coat)
12.46 Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :
12.46.1 Two or more coats on new work Sqm 69.00

12.46.2 One or more coats on old work. Sqm 34.00
12.47 Varnishing with varnish of approved brand and manufacture :

12.47.1 Two or more coats glue sizing with copal varnish over an Sqm 89.00
under coat of flatting varnish.
12.47.2 Two or more coats glue sizing with spar varnish or an under Sqm 94.00
coat of flatting varnish.
12.48 French sprit polishing :

12.48.1 Two or more coats on new work including a coat of wood Sqm 167.00
filler.
12.49 Polishing on wood work with ready mixed wax polish of

approved brand and manufacture :
12.49.1 New Work Sqm 69.00
12.49.2 Old Work. Sqm 29.00
12.50 Providing and applying Melamine polish on teak wood work

of approved brand and manufacture to give an even shade
with two or more coats by compressor including sand
papering, wood filler coat etc complete in all respect:
12.50.1 New Surface Sqm 887.00
12.50.2 Old Surface Sqm 606.00
BSR_B12 [146]
Chapter
Code No
1 2 3 4
12.51 Painting one thin coat with white lead of approved brand and Sqm 36.00
manufacture on wet or patchy portion of plastered surfaces.
12.52 Painting (two or more coats) on rain water soil, waste and vent
pipes and fitting with black anticorrosive bitumastic paint of
approved brand and manufacture over and including a priming
coat of ready mixed zinc chromate yellow primer on new work
:
12.52.1 75mm dia. Pipes. Mtr. 17.00
12.52.2 100mm dia. Pipes Mtr. 26.00
12.52.3 150mm dia. Pipes. Mtr. 40.00
12.53 Painting (one or more coats) on rain water soil,

waste and vent pipes and fitting with black
anticorrosive bitumastic paint of approved brand and
manufacture on old work :
12.53.1 50mm dia. Pipes. Mtr. 3.00
12.53.2 75mm dia. Pipes. Mtr. 5.00
12.53.3 100mm dia. Pipes Mtr. 7.00
12.53.4 150mm dia. Pipes. Mtr. 10.00
12.54 Painting (two or more coats) on rain water, soil, waste and
vent pipes and fittings with synthetic enamel paint of approved
brand and manufacture and required colour over a priming
coat of approved steel primer on new work.
12.54.1 75mm dia. Pipes. Mtr. 17.00
12.54.2 100mm dia. Pipes Mtr. 29.00
12.54.3 150mm dia. Pipes. Mtr. 40.00
12.55 Painting (two or more coats) on rain water, soil, waste and
vent pipes and fittings with synthetic enamel paint of approved
brand and manufacture and required colour over a priming
coat of approved steel primer on old work.
12.55.1 50mm dia. Pipes. Mtr. 3.00
12.55.2 75mm dia. Pipes. Mtr. 5.00
12.55.3 100mm dia. Pipes Mtr. 7.00
12.55.4 150mm dia. Pipes. Mtr. 8.00
12.56 Painting with oil type wood preservative of approved brand

and manufacture :
12.56.1 New work (Two or more coats). Sqm 21.00
12.56.2 Old work (One or more coats). Sqm 11.00
BSR_B12 [147]
Chapter
Code No
1 2 3 4
12.57 Providing and applying two coats of fire retardant paint Sqm 353.00
unthinned on cleaned wood/ply surface @ 3.5 sqm per litre
per coat including preparation of base surface as per
recommendations of manufacturer to make the surface fire
retardant.
12.58 Coal-tarring coats on new work using 0.16 and 0.12 litre of Sqm 23.00
coal tar per Sqm in the first and second coat respectively.
12.59 Painting with Aluminium paint of approved brand and

manufacture to give an even shade :
12.59.1 Two or more coats on new work. Sqm 53.00
12.60 Painting with acid proof paint of approved brand and
manufacture of required colour to give an even shade :

12.60.1 Two or more coats on new work . Sqm 54.00
12.60.2 One or more coat on old work . Sqm 26.00
12.61 Painting with black anti-corrosive bitumastic paint of

approved brand and manufacture to give an even shade :
12.61.1 Two or more coats on new work. Sqm 47.00
12.61.2 One or more coat on old work. Sqm 19.00
12.62 Lettering with black Japan paint of approved brand and P. Letter 2.00
Per cm.
manufacture. height
12.63 Re-lettering with black Japan paint of approved brand and P. Letter 1.00
Per cm.
manufacture. height
12.64 Providing and applying superior quality emulsion for wall

painting with Velvet touch/Royal paint etc of approved brand
and manufacture to give an even shade with putty and
preparation of surface applying with the help of paint roller the
work complete in all respect as per direction of Engineer-in-
charge.
12.64.1 New Work Three or More coat Sqm 246.00
12.64.2 Old Work Analysis Sqm 162.00
BSR_B12 [148]
Chapter
Code No
1 2 3 4
12.65 Spray painting in approved shade and approved quality with Sqm 1859.00
Duco paint of required colour to give even shade with two or
more coats by compressor including sand papering, NC putty
filler coat etc complete in all respect as per design given by
Engineeer incharge on new work.
12.66 Providing and applying P.U. paint of apporved brand and Sqm 304.00
manufature to even shade.
Two or more coats on New works.
12.67 Wall painting with Royal Play paint with various types of Sqm 365.00
designs as approved of approved brand and manufacture to
give an even shade including all scaffalding.
Two or more coats on New work including preparation of base
with primer, putty lippy etc. Complete in all respect.
12.68 Lining work on Yellow & Pink Exterior Paint/ Colour wash Sqm 43.00
including making Gola, Gardana, Kangoora and Orgnamental
lining work as per approved style and pattern complete in all
respect with Exterior (White/Brown) paint as required
complete in all respect as per direction givin by Engineer in
charge.
12.69 Face lifting (Doba Wash) with washing of stones by (1:20) Sqm 73.00
acid & water solution, rubbing by brush, washing by clear
water, pointing of damaged grooves & doba washing with
good quality lime water and painting of doors, windows,
ventilators upto all height & lead including all scaffolding and
T&P etc. complete as per instructions and direction of
Engineer-in-charge.
BSR_B12 [149]
CHAPTER : B-13
REPAIRS TO BUILDING
Chapter
Code No
1 2 3 4
13.1 Repairs to plaster of thickness 12mm to 20mm in patches of Sqm 235.00

area 2.5 sq. metres and under including cutting the patch in
proper shape, raking out joints and preparing and plastering
the surface of the walls complete including disposal of rubbish
to the dumping ground within 50 m lead With cement mortar
1 :4 ( 1 cement : 4 coarse sand)
13.2 Fixing chowkhats in existing opening including embedding

chowkhats in floors or walls cutting masonry for holdfasts
embedding hold fasts in cement concrete blocks with cement
concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size) painting two coats of coal tar
to sides of chaukhats and making good the damages to walls
and floors as required complete including disposal of rubbish
to the dumping ground within 50 metres lead.
13.2.1 Door chowkhats Each 615.00
13.2.2 Window chowkhats Each 383.00
13.2.3 Clerestory window chowkhats Each 271.00
13.3 Making the opening in masonry including dismantling in floor Sqm 447.00
or walls by cutting masonry and making good the damages to
walls, flooring and jambs complete to match existing surface
i/c disposal of mulba/ rubbish to the nearest municipal
dumping ground. For door/windows/clerestory windows
13.4 Renewing glass panes,with putty and nails wherever necessary

13.4.1 Float glass panes of thickness 4 mm Sqm 617.00
13.4.2 Float glass panes of thickness 5 mm Sqm 763.00
13.5 Renewing glass panes with wooden fillets wherever necessary

:
13.5.1 4mm thick plain glass panes. Sqm 765.00
13.6 Renewing glass panes and refixing existing wooden fillets :

BSR_B13 [150]
Chapter
Code No
1 2 3 4
13.7 Supplying and fixing new wooden fillets wherever necessary: Rm 29.00
2nd class teak wood fillets
13.8 Renewal of old putty of glass panes (length) Rm 18.00
13.9 Refixing old glass panes with putty and nails Sqm 213.00
13.10 Fixing old glass panes with wooden fillets (Excluding cost of Sqm 176.00
fillets)
13.11 Providing and fixing 16 mm M.S. Fan clamps of standard Each 215.00
shape and size in existing R.C.C. slab including cutting chase
and making good and painting exposed portion of the clamps
complete.
13.12 Repair to stone masonary in cement sand mortar 1:6 with old Sqm 318.00
and new stone.
13.13 Repair to brick masonary in cement sand mortar 1:6 with new Sqm 354.00
brick.
13.14 Cement plaster 1:3 under old stone slabs with admixture
(gur,nails,binding wire to mesh and scraping scales & dressing
joints of slabs complete.
13.14.1 Proofing upto 25 mm thickness. Sqm 288.00
13.14.2 Proofing above 25 mm thickness& upto 60 mm thickness Sqm 459.00
13.15 Patch repair to cement concrete floor including digging out old Sqm 317.00
floor in regular shape and removal of rubbish curing etc.
complete in all respects.
13.16 Washing floor with soda, soap or other cleaning material. Sqm 1.00
13.17 Removal and refixing stone chhajja 50 to 75 mm thick Sqm 185.00

including finishing, complete in all respects.
13.18 Replacing broken roofing slab in patches including lime Sqm 1844.00
terrace, ceiling plaster etc. including removal of broken slabs.
13.19 Making holes in stone masonry wall upto 450 mm x 450 mm Each 182.00
size and making good in CM 1:6.
BSR_B13 [151]
Chapter
Code No
1 2 3 4
13.20 Grinding of existing floor with

13.20.1 60, 80, 120 and 360 No. Carborundum stone including cost Sqm 69.00
of wax polishing complete :
13.20.2 120 and 360 No. Carborundum stone including cost of wax Sqm 43.00
polishing complete :
13.21 Add extra for mirror polishing on existing marble work/ Kota Sqm 121.00
stone flooring work where ever required to give high gloss
finish complete.
13.22 Providing and fixing double scaffolding system on the exterior Sqm. 162.00
side, upto five story made with 4" wooden member 1.5 m c/c
horizontal and vertical direction joining with rassi, clamps,
challies. The scaffolding system shall be stiffened with
bracing, runner, connection of building if necessary with all
essential safty features for the workmen etc complete as per
direction of EI.The lavation area of the scaffolding shall be
measured for payment. The payment will be made once
irrespective of duration of scaffolding.
Note : This item to be used for maintence work judicially
13.23 Repair of existing steel glazed doors, windows and ventilator, Sqm. 332.00
MS sheet door, garge doors, compound wall gates etc. by
welding drilling complete include. Cost of welding rods and
hire charge of welding meachine and TP etc complete
13.24 Labour charges for repair to door / window without using any Sqm. 220.00
material such as applying randha (finishing) tightening of bolts
& screw etc.
13.25 L/C for fixing of GI/AC sheet include. Cutting jhiri and repair Sqm. 256.00
, cutting of sheet , fixing of sheet with J or L hook and
bitumen washer as per direction of EI
13.26 Repair of rolling shutter with replacement of shutter spring Each 866.00
incl. removal of old spring in the existing rolling shutter incld.
Cost of new spring
13.27 Repair of rolling shutter with using any material such as bend Each 606.00
repair , tightening of spring,bolt and screw etc complete
BSR_B13 [152]
Chapter
Code No
1 2 3 4
13.28 Refebrication work with existing steel work including cutting, Kg 34.00
welding & refebrication as per requirement with fixing at site
complete as per direction of Engineer In charge
13.29 Repair to damaged RCC slabs, beams and columns etc for Sqm 1568.00
strengthening with cement mortar 1 : 2 in following steps :-
(i) Choping losse and cracked concrete to required depth,
cleaning the exposed surface of steel and concrete with wire
brush and sand papering , cleaning of concrete surface with
water as necessary and getting dried.
(ii) Applying Epoxy primer on the exposed steel bars.
(iii) Applying Epoxy hardener and resin mix (as per
manufectured's specification) on concrete and steel bars with
brush.
(iv) Speading dry cement mortar 1 : 2 mix over epoxy treated wet
surface and allow it to dry for one day.
(v) Plastering the surface with cement sand mortar 1 : 3 upto
depth of 30mm complete.
(vi) Cure the plastered surface for 15 days, All work including
scaffolding etc. complete in all respect.
13.30 Replacement of stone Chajja with sriwan in damaged portion Sqm 2820.00
as per existing thickness and width in CM 1 : 3 with removal
of old damaged pieces of chajja including top plaster of chajja
and bottom pointing in CM 1 : 3 with scoffolding upto
Ground floor level as per direction of Engineer in charge
13.30.1 Add Extra for each additional floor Sqm 264.00
13.31 Repair to damaged cement plaster of stone chajja with CM 1 : Sqm 633.00
3 of required thickness on top & bottom as per existing
pattern and making patta etc complete up to three floor level as
per direction of Engineer in charge including all necessary
scoffolding etc
13.32 Mechanised cleaning of storage tanks comprises of following

6 stage as mentioned below :
(i) Mechanical dewatering
(ii) Desalting removal of leftover dirty water and sludge with
sludge pump
(iii) Cleaning of wall, ceiling and floor by high pressure water jet
with help of equipments which creates a pressure of 100-150
bar
(iv) Removal of remaing sludge from floor with the help of
industrial vacum cleaner.
BSR_B13 [153]
Chapter
Code No
1 2 3 4
(v) Spraying of non toxic, bio degradable ecofriendly and

bacterial agent certified by a govt approved laborary to
disinfect the tank from all harmfull pathogens. The dose
should be safe as per the UECD guidelines & 23 adopted on
17 th december 2001.
(vi) Treatment of inside tank by exposing UV radiation to kill
further suspended or floating bacteria if any
13.32.1 Upto 500 ltr. Ltr. 0.40
13.32.2 Above 500 ltr. to 1000 Ltr. Ltr. 0.35
13.32.3 Above 1000 ltr. Ltr. 0.30
13.33 Repair of door, window shutters including cost of

material and labour for change of damaged :
(a) Style / rail of teak wood 30mm thick/ Aluminium Section
(i) 4"wide Rmt. 266.00
(ii) 6" wide Rmt. 367.00
(b) Panel by
(i) Shuttering Ply - 9mm thick (Commercial) Sqm. 598.00
(ii) Wire Gauge 14 mesh x 24 gauge Sqm. 534.00
(iii) Plain Glass Panes 4mm thick Sqm. 431.00
(c) Aldrop of mild Steel

(i) 12" long x12mm dia Each 147.00
(ii) 8" long x 10mm dia Each 106.00
(d) Stopper of Aluminium with

(i) Single Rubber Gutka Each 33.00
(ii) Double Rubber Gutka Each 47.00
(e) Door Springs of mild Steel Each 160.00
(f) Steel Hinges

(i) For Wooden Chowkhat 3" size. Each 24.00
(ii) For Wooden Chowkhat 4" size Each 34.00
(iii) For Stone Chowkhat ,4"size Each 29.00
(g) Mild Steel Tower Bolt 6" long Each 39.00
(h) Steel Locking Bolt Each 53.00

(i) Steel Handle 6" size Each 24.00
BSR_B13 [154]
Chapter
Code No
1 2 3 4
13.34 Making of hole in R.C.C. slab/wall/beams and masonary wall

(width up to 450 mm) by core cutting machine complete as per
direction of EI
13.34.1 From diameter 100mm to 150mm Nos 1107.00
13.34.2 Diameter above 150mm Nos 1663.00
BSR_B13 [155]
CHAPTER : B-14
DISMANTLING & DEMOLISHING WORK
Note : All items of demolition & dismantling of building shall be
conform to IS 4130 for handling , IS 7969 for storage and IS
3696 for scaffolding
Chapter
Code No
1 2 3 4
14.1 Demolishing lime concrete manually/ by mechanical means Cum 254.00

and disposal of material within 50 metres lead as per direction
of Engineer-in-charge.
14.2 Demolishing cement concrete manually/ by mechanical means

including disposal of material within 50 metres lead as per
direction of Engineer-in-charge.
14.2.1 1: 3: 6 or richer mix. Cum 637.00
14.2.2 1: 4: 8 or leaner mix. Cum 393.00
14.3 Demolishing R.C.C. work manually/ by mechanical means Cum 930.00

including stacking of steel bars and disposal of unserviceable
material within 50 metres lead as per direction of Engineer-in-
charge.
14.4 Demolishing R.B. work manually/ by mechanical means Cum 832.00

including stacking of steel bars and disposal of unserviceable
material within 50 metres lead as per direction of Engineer-in-
charge.
14.5 Extra for cutting reinforcement bars manually/ by mechanical Sqm 317.00
means in R.C.C. or R.B. work (Payment shall be made on the
cross sectional area of R.C.C. or R.B. work) as per direction of
Engineer-in-charge
14.6 Extra for scrapping, cleaning and straightening reinforcement Kg 2.00

from R.C.C. or R.B. work
14.7 Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead as per direction
of Engineer-in-charge.
14.7.1 In mud mortar. Cum 185.00
14.7.2 In lime mortar. Cum 221.00
14.7.3 In cement mortar. Cum 538.00
BSR_B14 [156]
Chapter
Code No
1 2 3 4
14.8 Removing mortar from bricks and cleaning bricks including

stacking within a lead of 50 meters (stacks of cleaned bricks
shall be measured):
14.8.1 From bricks work in mud mortar. 1000 Nos. 1247.00
14.8.2 From brick work in lime mortar 1000 Nos. 1467.00
14.8.3 From brick work in cement mortar. 1000 Nos. 1854.00
14.9 Demolishing stone rubble masonry manually/ by mechanical

means including stacking of serviceable material and disposal
of unserviceable material within 50 metres lead as per
direction of Engineer-in-charge:
14.9.3 In mud mortar Cum 179.00
14.9.4 dry masonry Cum 153.00
14.10 Dismantling dressed stone work ashlar face stone work,

marble work or precast concrete work manually/ by
mechanical means including stacking of serviceable and
disposal of unserviceable material within 50 metres lead as per
direction of Engineer in charge :
14.11 Removing mortar from stones and cleaning stones and

concrete articles including stacking (net quantity of stacks of
cleaned materials will be measured):
14.11.1 Lime mortar. Cum 128.00
14.11.2 Cement mortar. Cum 185.00
14.12 Dismantling doors, windows and clearstory windows steel or

wood shutter including chowkhats and holdfasts etc. complete
and stacking within 50 meters lead:
14.12.1 Of area 3 square meter and below. Each 105.00
14.12.2 Of area exceeding 3 square meter. Each 144.00
14.13 Taking out doors, windows and clearstory windows shutters

(steel or wood) including stacking within 50 meters lead:
14.13.1 Of area 3 square meter and below. Each 42.00
14.13.2 Of area exceeding 3 square meter. Each 55.00
BSR_B14 [157]
Chapter
Code No
1 2 3 4
14.14 Dismantling wood work in frames, trusses, purlins and rafters

up to 10 meter span and 5m height including, levelling
stacking the material within 50m lead:
14.14.1 Of sectional area 40 Sq.cm and above Cum 1368.00
14.14.2 Of sectional area below 40 Sq.cm. Mtr. 6.00
14.15 Extra for dismantling trusses, rafters, purlins etc. of wood

work for every additional span of one metre or part thereof
beyond 10 metres :
14.15.1 of sectional area 40 Sq.cm and above Cum per 167.00
Meter span
14.15.2 of sectional area below 40 Sq.cm. Mtr. .Per 1.00
meter span
14.16 Extra for dismantling trusses, rafters, purlins etc. of wood

work for every additional height of one metre or part thereof
beyond 5 metres :
14.16.1 of sectional area 40 Sq.cm and above Cum per 238.00
Meter span
14.16.2 of sectional area below 40 Sq.cm. Mtr. per 1.00
Meter span
14.17 Dismantling steel work in single sections including

dismembering and stacking within 50 meters lead in:
14.17.1 R.S. joists. Kg 1.00
14.17.2 Channels, angles, tees & flats. Kg 1.00
14.18 Dismantling steel work in built up sections in angles, tees, Kg 2.00

flats and channels including all gusset plates, bolts, nuts,
cutting rivets, welding etc. including dismembering and
stacking within 50metres lead.
14.19 Dismantling steel work manually/ by mechanical means in Kg 1.00

built up sections without dismembering and stacking within 50
metres lead as per direction of Engineer-in-charge.
14.20 Extra for dismantling trusses, rafters, purlins etc. of steel work Kg per 0.50
for every additional span of one metre or part thereof beyond Mtr.
10 metres
14.21 Extra for dismantling trusses, rafters, purlins etc. of steel work Kg per 0.50
for every additional height of one metre or part thereof Mtr.
beyond 5 metres.
BSR_B14 [158]
Chapter
Code No
1 2 3 4
14.22 Extra for making of structural steel work required to be re- Kg 2.00
erected.
14.23 Dismantling tile work in floors and roofs laid in cement mortar
unserviceable material within 50 meter lead:
14.23.1 For thickness of tiles 10mm to 25mm. Sqm 20.00
14.23.2 For thickness of tiles 25mm to 40mm. Sqm 34.00
14.24 Dismantling dry brick pitching in floors drains etc. including Cum 343.00
stacking of serviceable material and disposal of unserviceable
material within 50 meters lead.
14.25 Dismantling stone slab/ terrazo chip flooring laid in cement Sqm 80.00
mortar including stacking of serviceable material and disposal
of unserviceable material within 50 meters lead.
14.26 Dismantling brick tiles covering in terracing including Sqm 34.00

material within 50 meters lead.
14.27 Demolishing mud phuska/ Lime dhar/ Kharanja in terracing Cum 285.00
and disposal of unserviceable material within 50 meters lead.
14.28 Dismantling roofing including ridges, hips, valleys and

rafters etc. and stacking the within 50 meter lead of:
14.28.1 G.I. Sheet. Sqm 48.00
14.28.2 Asbestos Sheet. Sqm 23.00
14.29 Dismantling stone slab roofing over wooden karries and Cum 700.00
battens (dismantling karries and battens to be paid for
separately) including stacking of serviceable material and
disposal of unserviceable material within 50 meter lead:
14.30 Dismantling Jack arch roofing and floors including stacking of Sqm 65.00
serviceable material and disposal of unserviceable material
within 50-meter lead.
14.31 Dismantling tiled roofing with battens boarding etc. complete Sqm 54.00
unserviceable material within 50-meter lead.
BSR_B14 [159]
Chapter
Code No
1 2 3 4
14.32 Dismantling thatch roofing including mats bamboos, jafries Sqm 14.00
etc. complete including stacking of serviceable material and
disposal of unserviceable material within 50 meter lead
14.33 Dismantling wooden ballies in posts and struts including Mtr. 6.00
stacking within 50 meters lead.
14.34 Dismantling and stacking within 50 meters lead fencing post,

struts, including earth work dismantling of concrete etc. in the
case of:
14.34.1 T or Angle Iron posts Each 72.00
14.34.2 R.C.C. posts. Each 80.00
14.35 Cutting ballies or wooden posts of fencing at the point of Each 7.00
projection above the concrete at ground and stacking the same
within 50 meter lead
14.36 Dismantling barbed wire or chain link fencing including Kg 10.00

bending making rolls and stacking within 50-meter lead.
14.37 Dismantling wooden trellis work excluding frames but Sqm 17.00
including bending, making rolls and stacking within 50 meter
lead.
14.38 Dismantling expanded metal or I.R.C. fabric with necessary Sqm 21.00
battens and beading including stacking the serviceable
material within 50-meter lead.
14.39 Dismantling wooden boards in lining of walls and partition

excluding supporting members but including stacking within
50 meter lead:
14.39.1 Up to 10mm thick Sqm 17.00
14.39.2 Thickness above 10mm up to 25mm Sqm 25.00
14.39.3 Above 25mm thick. Sqm 36.00
14.40 Dismantling precast concrete or stone slabs in wall

partitions etc. including stacking within 50 meter lead:
14.40.1 Thickness up to 40mm. Sqm 77.00
14.40.2 Thickness 40mm up to 75mm Sqm 117.00
BSR_B14 [160]
Chapter
Code No
1 2 3 4
14.41 Dismantling CI or asbestos rain water pipe with fitting

and clamps including stacking within 50 meter lead:
14.41.1 Up to 80mm dia pipe. Mtr. 19.00
14.41.2 100mm dia pipe. Mtr. 19.00
14.41.3 150mm dia pipe. Mtr. 20.00
14.42 Dismantling tar felt over roofing complete including stacking Sqm 23.00
of serviceable material and disposal of unserviceable material
14.43 Dismantling GI pipes (external work) including excavation

and refilling trenches after taking out the pipes and including
stacking of pipes within 50 meter lead:
14.43.1 15mm to 40mm nominal bore. Mtr. 41.00
14.43.2 Above 40mm nominal bore. Mtr. 47.00
14.44 Dismantling CI pipes including excavation and refilling

trenches after taking out the pipes, breaking lead caulked
joints, melting of lead and making into block, including
stacking of pipes lead at site within 50 meter, of dia:
14.44.1 Up to 150mm dia. Mtr. 109.00
14.44.2 Above 150mm dia. up to 300mm dia. Mtr. 147.00
14.44.3 Above 300mm dia. Mtr. 197.00
14.45 Dismantling steel cylinder, R.C. pipes etc. including

excavation and refilling trenches after taking out the pipes,
breaking lead caulked joints, melting of lead and making into
blocks including stacking of pipes, within a lead of 50 meter,
of dia:
14.45.1 Up to 600mm dia. Mtr. 197.00
14.45.2 Above 600 mm dia. Mtr. 497.00
14.46 Dismantling asbestos cement pressure pipes including

excavation and refilling trenches after taking out the pipes, and
stacking the same within a lead of 50 meter, of dia:
14.46.1 Up to 150mm. Mtr. 86.00
14.46.2 Above 150mm. Mtr. 105.00
14.47 Taking out CI cover with frame from stone slab / RCC slab of Each 187.00
inspection chambers of various sizes including dismantling of
stone slab / RCC slab roofing and stacking of useful
materials near the site and disposal of unserviceable materials
BSR_B14 [161]
Chapter
Code No
1 2 3 4
14.48 Taking out C.I. cover with frame from stone slab / RCC slab Each 110.00
of manholes of various sizes including dismantling of stone
slab / RCC slab roofing and stacking of useful materials near
the site and disposal of unserviceable materials within 50-
meter lead.
14.49 Dismantling of RCC spun vent shaft including excavating the Each 1271.00
cement concrete pit completely, taking out the shaft, refilling
the excavated gap stacking the useful material near the site and
disposal of unserviceable materials within 50 meter lead.
14.50 Dismantling of gully chamber of various sizes including CI Each 255.00

grating with frame including stacking of useful materials near
the site and disposal of unserviceable material within 50 meter
lead including refilling the gap.
14.51 Dismantling of flushing cistern of any size including stacking Each 277.00
of useful materials near the site and disposal of unserviceable
material within 50 meter lead.
14.52 Dismantling of CI sluice valve including stacking of useful

materials within a lead of 50 meter:
14.52.1 Up to 150mm dia. Each 99.00
14.52.2 Above 150mm dia. Each 353.00
14.53 Dismantling of spindle fire hydrant including stacking of Each 213.00

useful material within 50 meter lead.
14.54 Dismantling of cement concrete platform along with curtain

walls and base concrete etc. including stacking of useful
materials near the site and disposal of unserviceable materials
within 50 metres lead :
14.54.1 Upto 1.44 Sqm Sqm 311.00
14.54.2 Above 1.44 Sqm to 2.52 Sqm Sqm 462.00
14.54.3 Above 2.52 Sqm to 3.84 Sqm Sqm 693.00
14.55 Dismantling old plaster or skirting, raking out joints and Sqm 15.00
cleaning the surface for plaster including disposal of rubbish
to the dumping ground within 50 meter lead.
BSR_B14 [162]
Chapter
Code No
1 2 3 4
14.56 Dismantling CC jali including cost of making grooves in Sqm 80.00

plaster and making good and including disposal of
unserviceable surplus material and stacking of serviceable
material with in 50 meters lead as directed by Engineer-in-
charge. .
14.57 Removing aluminium/Gypsum partitions, doors, windows, Sqm 17.00

fixed glazing and false ceiling including disposal of
unserviceable material and stacking of serviceable material
with in 50 meters lead as directed by Engineer-in-charge.
14.58 Making of hole (width up to 150 mm) in R.C.C.

slab/wall/beams by power driven drilling machine complete as
per direction of EI
14.58.1 upto 150mm thick Each 176.00
14.58.2 above 150 mm thick Each 270.00
14.59 Dismantling manually/ by mechanical means including

material within 50metres lead as per direction of Engineer-in-
charge bound
14.59.1 Water : macadam road (average thickness 250 mm) Sqm 69.00
14.59.2 bituminous road (average thickness 300 mm) Sqm 134.00
BSR_B14 [163]
CHAPTER : B-15
WATER PROOFING AND EXPANSION JOINT
TREATMENT
Chapter
Code No
1 2 3 4
WATER PROOFING TREATMENT
15.1 Providing and laying water proofing treatment to vertical and Sqm. 513.00
horizontal surfaces of depressed portions of W.C., kitchen and
the like consisting of :
(i) Ist course of applying cement slurry @ 4.4 Kg/sum mixed with
water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.
(ii) IInd course of 20mm cement plaster 1:3 (1 cement: 3 coarse
sand) mixed with water. proofing compound in recommended
proportion including rounding off junction of vertical and
horizontal surface..
(iii) IIIrd course of applying blown or residual bitumen applied hot
at 1.7 Kg per sqm. of area.
(iv) IVth course of 400 micron thick PVC sheet .(Overlaps at joints
of PVC sheet should be 100 mm wide and pasted to each other
with bitumen @ 1.7 Kg/sqm.)
15.2 Providing and Placing in position suitable PVC water stops

conforming to IS:12200 for construction/ expansion joints
between two RCC members and fixed to the reinforcement
with binding wire before pouring concrete etc. complete :
15.2.1 Serrated with central bulb (225 mm wide, 8-11 mm wide) Rm 496.00
15.2.2 Dumb bell with central bulb (180 mm wide, 8 mm wide) Rm 460.00
15.2.3 Kickers (320 mm wide, 5 mm thick) Rm 472.00
15.3 Providing and laying water proofing treatment in sunken Sqm. 275.00
portion of WCs, bathroom etc., by applying cement slurry
mixed with water proofing cement compound consisting of
applying :
(i) first layer of slurry of cement @ 0.488 kg/sqm mixed with

water proofing cement compound @0.253 kg//sqm .This layer
will be allowed to air cure for 4 hours.
BSR_B15 [164]
Chapter
Code No
1 2 3 4
(ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with

water proofing cement compound @ 0.126 kg/sqm This layer
will be allowed to air cure for 4 hours followed by water
curing for 48 hours. The rates includes preparation of surface
treatment & sealing of all joints ,corners, junction with
polymer mixed slurry.
15.4 Providing and laying water proofing treatment on roofs of Sqm. 372.00
slabs by applying cement slurry mixed with water proofing
cement compound consisting of applying :
(i) after surface preparation, first layer of slurry of cement @

0.488 kg/sqm mixed with water proofing cement compound
@ 0.253 kg/sqm.
(ii) laying second layer of Fiber glass cloth when the first layer is
still green . Overlaps of joints of fiber cloth should not be less
than 10 cm .
(iii) Third layer of 1.5 mm thickness consisting of slurry of cement
@ 1.289 kg/sqm mixed with water proffing cement compound
@ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will
be allowed to air cure for 4 hours followed by water curing
for 48 hours. The entire treatment will be taken upto 30cm on
parapet wall and tucked into groove in parapet all around
(iv) fourth and final layer of brick tiling „with cement mortar or
any other approved protective coarse. (which will be paid for
separately) For the purpose of measurement the entire treated
surface will be measured
15.5 Providing and laying four courses water proofing treatment Sqm. 354.00
with bitumen felt over roofs consisting of first and third
courses of blown bitumen 85/25 or 90/15 conforming to IS :
702 applied hot 1.45Kg. per square meter of area for each
course, second course of roofing felt type 3 grade –I (Hessian
based self finished bitumen felt )and fourth and final course of
stone grit 6mm and down size of pea sized gravel spread at
6cubes diameter per square meter including preparation of
surface, but excluding grading, complete with Bitumen felt
(Hessian base) type 3 grade - I conforming to : 1322.
BSR_B15 [165]
Chapter
Code No
1 2 3 4
15.6 Providing and laying six courses water proofing treatment Sqm. 548.00
with bitumen felt over roofs consisting of first, third and fifth
course of blown bitumen 85/25 or 90/15 conforming to IS :
702 applied hot @ @ 1.45 ,1.20 and 1.45 Kg per sqm. of area
respectively second and fourth courses of roofing felt type 3
grade-I conforming to IS 1322 (Hessian based self finished
bitumen felt) conforming to IS 1322 and sixth and final course
of stone grit 6mm and down size of pea sized gravel spread at
6 cubic dm. per square metre including preparation of surface
but excluding grading complete .
15.7 Providing and laying six courses water proofing treatment with Sqm. 595.00
bitumen felt over roofs consisting of first, third and fifth
courses of blown or/and residual bitumen applied hot at 1.45,
1.20 and 1.70 Kg. per Sqm. of area respectively second and
fourth courses of roofing felt type 2 grade-I (fiber base self
finished bitumen felt) and sixth and final course of stone grit
6mm and down size or pea sized gravel spread at 8cu.dm per
sqm including preparation of surface excluding grading
complete confirming to IS : 1322 and 1346.
15.8 Providing and laying six courses water proofing treatment with Sqm. 595.00
bitumen felt over roofs consisting of first, third and fifth
courses of blown or/and residual bitumen applied hot at 1.45,
1.20 and 1.70Kg. per Sqm of area respectively second and
fourth courses of roofing felt type 2 grade 2 (fiber base self
finished bitumen felt) and sixth and final course of stone grit
6mm and down size of pea sized gravel spread at 8cu.dm per
sqm including preparation of surface excluding grading
complete confirming to IS : 1322 and 1346.
15.9 Supplying and applying bituminous solution primer on roofs Sqm. 23.00
or on wall surface at 0.24 litre per sqm.
15.10 Deduct for omitting in water proofing treatment final course of

spreading stone grit 6mm. and down size of pea sized gravel :
15.10.1 At 6dm3 per Sqm. Sqm. 10.00
15.10.2 At 8dm3 per Sqm. Sqm. 12.00
BSR_B15 [166]
Chapter
Code No
1 2 3 4
15.11 Providing and laying APP (Atactic Polypropylene Polymer) Sqm. 413.00
modified prefabricated five layer 3mm thick water proofing
membrane, black finished reinforced with glass fibre matt
consisting of a coat of bitumen primer for bitumen membrane
@ 0.40 Itr/sq.mt. by the same membrane manufacture of
density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps.
Over the primer coat the layer of membrane shall be laid using
Butane Torch and sealing all joints etc., and preparing the
surface complete. The vital physical and chemical parameters
of the membrane shall be as under Joint strength in
longitudinal and transverse direction at 23°C as
650/450N/5cm. Tear strength in longitudinal and transverse
direction as 300/250N. Softening point of membrane not less
than 150°C. Cold flexibility shall be upto -2°C when tested in
accordance with ASTM, D-5147. The laying of membrane
shall be got done through the authorized applicator of the
manufacturer of membrane.
3 mm thick
15.12 Providing and laying APP (Atactic Polypropylene Polymer) Sqm. 474.00
modified prefabricated five layer 3mm thick water proofing
membrane, black finished reinforced with non-woven
polyester matt consisting of a coat of bitumen primer for
bitumen membran @ 0.40 Itr/sq.mt. by the same membrane
manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity
70-160 cps. Over the primer coat the layer of membrane shall
be laid using Butane Torch and sealing all joints etc., and
preparing the surface complete. The vital physical and
chemical parameters of the membrane shall be as under Joint
strength in longitudinal and transverse direction at 23°C as
650/450N/5cm. Tear strength in longitudinal and transverse
direction as 300/250N. Softening point of membrane not less
than 150°C. Cold flexibility shall be upto -2°C when tested in
accordance with ASTM, D-5147. The laying of membrane
shall be got done through the authorized applicator of the
manufacturer of membrane.
3 mm thick
15.13 Extra for covering top of membrane with Geotextile, 120gsm Sqm. 56.00
non woven, 100% polyester of thickness 1 to 1.25mm bonded
to the membrane with intermittent touch by heating the
membrane by Butane Torch as per manufactures
recommendation.
BSR_B15 [167]
Chapter
Code No
1 2 3 4
15.14 Extra over items of Cement Plaster / Cement Concrete flooring P Pack 57.00
/ Plain or RCC work Providing and mixing admixture of 125 gm
synthetic Fiber 6mm / 12mm. @ rate of 125gm. pack per 50
Kg. of Cement or in the ratio of as specified by manufacture
specification and direction of Engineer In-charges with all
leads and lifts.
EXPANSION JOINT TREATMENT:
15.15 Supplying and providing of two components poly sulphide

sealant containing solid contents, confirming to standard
specification and approved compatible primer, for priming
vertical faces prior to application of poly sulphide sealant
including all labour charges for sealing of expansion joints
after drill mixing of two components sealing compound.
Cleaning and preparation of expansion joint using wire brush
sand papering with emery paper and filing with suitable
mechanical means. The work includes racking and cleaning of
joints, sticking, debonding tape on bottom of joint, applying
primer on edges, using masking tape on edges, providing of
sealant and removal of masking tape immediately after
providing sealant in joint.
15.15.1 To vertical joint between RCC columns, bricks & stone Mtr. 828.00
masonry in size 40 mm width and 12 mm depth, including
providing back up material (Thermocol foam) if required.
15.15.2 To joints in flooring, as per drawing with first layer of poly Mtr. 865.00
sulphide sealant in size 20 mm width and 10 mm depth over
PE Foam and then providing polyethylene foam back up rod
25 mm dia size and finally providing another layer of poly
sulphide sealant in size 20 mm width and 10 mm depth over
P.E. back up rod as per application procedure and direction of
Engineer-in-charge.
15.16 Providing and fixing in position bitumen impregnated

fiberboard confirming to IS: 1838 in expansion joints
including the cost of primer sealing compound.
15.16.1 12 mm. thick Sqm. 605.00
15.16.2 18 mm. thick Sqm. 792.00
15.16.3 25 mm. thick Sqm. 1034.00
BSR_B15 [168]
Chapter
Code No
1 2 3 4
15.17 Providing and fixing expansion joint board for building RCC
column beams, walls, slab of Polyethylene foam of density 30
3
to 35 Kg/m of Armour Board.
15.17.1 20mm Thick Sqm. 416.00
15.17.2 25 mm Thick Sqm. 493.00
15.17.3 30 mm Thick Sqm. 563.00
15.17.4 40 mm Thick Sqm. 717.00
15.17.5 50 mm Thick Sqm. 837.00
15.18 Providing and fixing 150 mm wide sheet covering over

expansion joints with iron screws as per design to match the
colour / shade of wall treatment.
15.18.1 Non-asbestos fibre cement board 6 mm thick as per IS:14862. Rm. 116.00
1
15.18.2 Aluminum fluted strips 2 mm thick Rm. 409.00
15.18.3 Acrylic sheet 5 mm thick Rm. 110.00
P.Cm. depth P.
15.19 Providing and filling in position bitumen sealing Cm. Width for
713.00
100mtr. length
compound grade A (IS 1834 ) in expansion joints.
15.20 Providing and filling in position bitumen mix filler of Per cm width 223.00
per cm depth
proportion 80 Kg. of hot bitumen, 1 Kg. of cement and 0.25 per 100 mtr.
cubic meter of coarse sand for expansion joints. length
R.C.C. FRAMES
15.21 Providing and fixing in cement sand mortar 1 : 3 single/double

rebated R..C. Door Window and ventilator frames
(Chowkhats) including 1% reinforcement as per design and
concrete mix 1 : 2 : 4 cutting etc. complete incl. horns. and
hold fasts :
15.21.1 Size 75 x 50mm Mtr. 129.00
15.21.2 Size 75 x 75mm Mtr. 146.00
15.21.3 Size 100 x 75mm Mtr. 154.00
15.21.4 Size 125 x 75mm Mtr. 165.00
15.22 Extra for RC frames (Chowkhats) Curved in plan Mtr. 10%
15.23 Extra for RCC frame finishing the exposed face with terrazo Mtr. 20%
(Mosaic) finish.
BSR_B15 [169]
Chapter
Code No
1 2 3 4
CUT STONE DOOR AND WINDOW FRAMES
15.24 Providing and fixing in cement sand mortar 1 : 4 single paitam

(rebated) stone doors windows and ventilator frames of
approved quarry :
15.24.1 Size 75 x 60mm Mtr. 190.00

15.24.2 Size 75 x 75mm Mtr. 202.00
15.24.3 Size 100 x 60mm Mtr. 232.00
15.24.4 Size 100x 75mm Mtr. 271.00
15.24.5 Size 125 x 100mm Mtr. 288.00
15.25 Providing and fixing in CM 1 : 4 double paitam (rebated)
stone door window and ventilator frames of approved quarry:
15.25.1 Size 100 x 75mm. Mtr. 260.00

15.25.2 Size 125 x 100mm Mtr. 315.00
15.26 Providing & mixing admixture in Cement Concrete Kg 444.00

flooring/Cement Plaster/Plain or RCC work, Synthetic
Polyster Triangular Construction Fiber of length
6mm/12mm/18mm with specific gravity 1.34 to 1.40 and
diameter 10-40 microns and melting point>220 degrres
centigrade by using 125 gm fiber for 50 kgs cement used as
per direction of Engineer-in-charge as per IS Code : 16481-
2016
15.27 Providing & mixing admixture in Cement Mass Concrete Kg 581.00

flooring CC Road, RCC work, Canal Lining and Shotcrete
Non Circular with ribbed surface Structural Synthetic Macro
Fiber 42-50mm length, specific gravity of > 1.30 and diameter
0.8 - 1.20mm and melting poing > 220 degree centigrade @
0.75% -100% by cement weight in mix as per direction of
Engineer-in-charge.
BSR_B15 [170]
Chapter
Code No
1 2 3 4
15.28 Nano technology water proofing, thermal insulation protection

coating :
15.28.1 Nano technology water proofing, thermal insulation protection Sqm 1162.00
coating 12 layer process for increasing life of building and
damage control for roof.-- before coating scaling, cleaning,
and preparing surface for treatment. Opening all joint and
cracks and filling them with nano technology crack filling
hydrophobic chemical with 2/3 coats. then after drying doing a
PCC coat on cracks. One coat of nano technology
hydrophobic/oiliophobic primer. Nano technology water
proofing treatment in3 coats non silicon based applied with
fiber mesh sheets in medium. Nano technology thermal
insulation coating highly elasticity in nature with 3 coats with
1000 micron width.2top coats of anti stain, anti slippery,
natural transparent high shine chemical for better life of the
treatment.
15.28.2 Nano technology water proofing, thermal insulation protection Sqm 829.00
coating 9 layer process for increasing life of building and
damage control protection for walls.-- before coating scaling,
cleaning, and preparing surface for treatment. Opening all
joint and cracks and filling them with nano technology crack
filling hydrophobic chemical with 2 coats. then after drying
doing a PCC coat on cracks. One coat of nano technology
hydrophobic/oiliophobic primer. Nano technology water
proofing treatment in 2 coats non silicon based thermal
insulation coating highly elasticity in nature with 2 coats with
1000 micron thickness 2 top coats of anti slippery, natural
transparent high shine chemical for better life of the treatment.
15.28.3 Nano technology water proofing or anti stain protection Sqm 893.00
coating 5-7 layer process for increasing life of all stone
fascia/facades/flooring or stone building and damage control
protection, life 7-9 years, warranty 5 years-- before coating
washing of stone and degreasing of that area is done 1 coat.
(Removing of algae/moss/blackness/stains/rust etc. is extra)
then after drying doing 1 coat of Nono technology
hydrophobic prime. After this on dry area Nano technology
water proofing treatment in 3 coats wet on wet. In case of anti
stain treatment 2 top coats of anti stain, anti slippery, natural
transparent high shine or matt chemical treatment is done.
BSR_B15 [171]
Chapter
Code No
1 2 3 4
15.29 Providing and Applying ACRYLIC emulsion polymer Sqm 526.00
waterproofing chemical coating, on over roof on over roof
slabs/terrace/balconies/parapet wall etc.with following
method/specification:
Paint the surface with regular paint brush so as to obtain
approximately 0.3mm thickness coating. apply the 2nd coat
next day at right angles to the 1st coat so that total thickness of
the coating should be approximately 0.6mm coverage by using
above formulation will be 40 ft2/ litre of chemical. painted
surface does not require any external water curing since
chemical will hold sufficient water for curing.After the primer
coat Apply 2 coats of modified acrylic emulsion polymer
water proofing compound having solar heat reduction
properties coating @ 0.330 KG/SQM on the surface of the
interval of 3-4 hours. Undulation on the surface is repair
before the waterproofing work.
15.30 Providing & applying one coat of UV resistant polymer Sqm 244.00
cement based waterproofing slurry coating of approved make
and quality on concrete or plastered surface as per
specifications including preparation of surface by cleaning
brushing and dust removing, filling of cracks and making the
surface leak proof by mixing one part of chemical with 2 parts
of cement and 2 parts of water (covering area 1.86 Sq.M/Kg of
chemical) including cost of cement, labour, tools & plant,
scaffolding if necessary etc., complete as directed by Engineer
in Charge.
Note: Undulations/cracks found on the surface should be
rectified with Cement Motor before application and the same
will be paid under relavent items.
15.31 Providing & applying Three coat of Acrylic Water Proof Sqm 486.00
membrane having sunlight and UV resistant properties over
waterproofing slurry coat , initial coat of 50-75 micron
thickness with diluting 1 part of chemical with 2 parts of clean
water, over which applying 2 coats at 2 Hrs .intervals each
with diluting 1 part of chemical with 20% of clean water for
total thickness of 400 to 450 microns (covering area 0.9
Sq.M/Kg of chemical including preparation of surface by
cleaning, brushing and dust removing, scaffolding if necessary
etc., with contractor's labour, tools, machinery etc, complete
as directed by Engineer in Charge.
BSR_B15 [172]
Chapter
Code No
1 2 3 4
15.32 Providing & applying Three coat of pure Acrylic Water based Sqm 522.00
elastomeric brush applied insulating coating on exterior
surface overwaterproofing slurry coat , initial coat of 50-75
micron thickness with diluting 1 part of chemical with 2 parts
of clean water, over which applying 2 coats at 2 Hrs, intervals
each with diluting 1 part of chemical with 10% of clean water
for total thickness of 400 to 450 microns (covering area 0.9
Sq.M/Kg of chemical) including preparation of surface by
cleaning, brushing and dust removing, scaffolding if necessary
etc., with contractor's labour, tools, machinery etc, complete
as directed by Engineer in Charge.
15.33 Providing and fixing 50mm thick extruded polystyrene rigid Sqm 659.00
insulation board of required size between cavity wall,
complying with ISO 4898:2008 & ASTM C 578-08b - type VI
having thermal conductivity of 0.0289 W/m K as per ASTM C
578 (measured as per IS 3346), compressive strength of >350
kPa listed as per ASTM D 1621, density of 34-36 kg/m3 as per
ASTM D 1622, water absorptions =< 1% by volume as per
ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per
ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D
3576. Fire retardent property as per DIN 4102, part 1 of class
B2 and as per ASTm E84 class A, fixed with suitable water
based adhesive and fastener, complete in all respect as per the
diretion of Engineer-in-Charge.
15.34 Providing & fixing 50mm extruded polystyrene (XPS) Sqm 662.00
insulation board density 36kg/m3, under or over RCC roof
slab complete as per manufacturing specifications fixed with
1% suitable water based adhesive and fastener, complete in all
respect as per the direction of Engineer-in-Charge.
BSR_B15 [173]
Chapter
Code No
1 2 3 4
15.35 Supply and Application of Solar IR Heat Reflective Coating Sqm 580.00
System conforming to BIS Std IS 17218:2019 for concrete
surface having minor leakage by thorough surface preparation
to remove dust, dirt, molds etc. using High Pressure WaterJet /
Wire Brush etc, opening of cracks and filling with elastomeric
crack filler, then applying one absorption coat of UV resI tan1
elastomeric coating having min. 50% solids (i.e. Thermacool
WP 51/or Equivalent), followed by application of "elastomeric
clear coating White Cement" waterproofing coat having min.
400% elongation and tensile strength of 2.2 MPa and than top
coating with 2 Coats of Solar lR
Heat Reflective Coating conforming to BIS Standard IS
17218:2019 (i.e. Therrnacool 0.3C/or Equivalent) of
cementitious surfaces, white colour, matt, surface coverage
3.25 sqm/Ltr/2 wat, dft 100- 120microns.The work shall be
done as per the directions of Engineer-in-charges.water based
pure acrylic, UV resistant, Solar lR Heat Reflective coating
with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated
durability test, suitable for all types of cementitious surfaces,
white colour, matt, surface coverage 3.25 sqm/Ltr/2 wat, dft
100- 120microns.The work shall be done as per the directions
of Engineer-in-charges.
BSR_B15 [174]
CHAPTER : B-16
ALUMINIUM & P.V.C. WORK
Chapter
Code No
1 2 3 4
16.1 Providing and fixing aluminum work for doors ,windows,

ventilators and partition with extruded built up standard
tubular / appropriate Z sections and other sections of approved
make conforming to IS :733 and IS :1285, fixed with rawl
plugs and screws or with fixing clips ,or with expansion hold
fasteners including necessary filling up of gap. at junctions , at
top ,bottom and sides with required PVC/neoprene felt etc.
Aluminium section shall be smooth ,rust free, straight ,mitered
and jointed mechanically wherever required including cleat
angle Aluminium snap beading for glazing /paneling , C.P.
brass/ stainless steel screws Al. Tower bolt & Al. handle & Al.
Aldrop etc.,all complete as per architectural drawings and the
directions of Engineer- in – charge .(Glazing and paneling to
be paid for separately).
16.1.1 For fixed portion
16.1.1.1 Anodised aluminum (anodised transparent 81 dyed to required Kg. 326.00
shade according to IS : 1868. (Minimum anodic coating of
grade AC 15, Anodizing to be got done from approved
Anodizer)
16.1.1.2 Powder coating aluminum ( minimum thickness of powder Kg. 351.00
coating 50 micron)
16.1.1.3 Polyester Powder coating aluminum ( minimum thickness of Kg. 364.00
powder coating 50 micron)
16.1.2 For shutters builtup standard tubular sections of openable

doors ,windows & ventilators including providing & fixing
hinges / rollers etc. and making provision for fixing of
fittings wherever required (lockes shall be paid for
separately).
16.1.2.1 Anodised aluminum (anodised transparent 81 dyed to required Kg. 355.00
Anodizer)
16.1.2.2 Powder coating aluminum ( minimum thickness of powder Kg. 381.00
coating 50 micron)
16.1.2.3 Polyester Powder coating aluminum ( minimum thickness of Kg. 394.00
BSR_B16 [175]
Chapter
Code No
1 2 3 4
16.2 Extra for shutters of sliding aluminum windows 10%
16.3 Extra for work done in curved / circular shape. 10%
16.4 Providing and fixing 12 mm thick prelaminated three layer

medium density (exterior grade ) particle board Grade I, Type
II conforming to IS : 12823 bonded formaldehyde synthetic
resin ,of approved brand and manufacture in paneling fixed in
aluminium doors ,windows shutters and partition frames with
C.P. brass / stainless steel screws etc. complete as per
architectural drawings and direction of engineer-in-charge.
16.4.1 Pre-laminated particle board with decorative lamination on Sqm 1030.00
one side and balancing lamination on other side.
16.4.2 Prelaminated particle board with decorative lamination on Sqm 1092.00
both sides.
16.5 Providing and fixing glazing in aluminium door, window

,ventilator shutters and partitions etc. with PVS / neoprene
gasket etc. complete as per the architectural drawings and the
directions of engineer-in-charge.(Cost of aluminium snap
beading shall be paid in basic item.)
16.5.1 With glass panes of 4.0 mm thickness ( weight not less than Sqm 791.00
10.0 kg/sqm) as per IS : 2835.
16.5.2 With float glass panes of 5.0 mm thickness ( weight not less Sqm 902.00
than 13.50 kg/sqm)
16.5.3 With float glass panes of 8 mm thickness Sqm 1235.00
16.6 Providing and fixing double action hydraulic floor spring of

approved brand and manufacture IS : 6315 marked, for doors
including cost of cutting floors as required, embedding in
floors and cover plates with brass pivot and single piece M.S.
16.6.1 With stainless steel cover plate Each 1426.00
16.6.2 With brass cover plate Each 1976.00
16.7 Filling the gap upto 5 mm depth and 5 mm width in between Rm 78.00
aluminium frame & adjacent RCC/ Brick/ Stone work by
providing weather silicon sealant over backer rod of approved
quality as per architectural drawings and direction of Engineer-
in-charge complete.
BSR_B16 [176]
Chapter
Code No
1 2 3 4
16.8 Providing and fixing 100mm brass locks (best make of approved Each 328.00
quality) for aluminium doors including necessary cutting and making
good etc. complete.
16.9 Providing and fixing aluminium U shape handle of size 100mm with
SS screws etc. Complete as per direction of Engineer-in-charge

16.9.1 Anodized (AC 15 ) aluminium Each 67.00
16.9.2 Powder coated minimum thickness 50 micron aluminium Each 73.00
16.9.3 Polyester powder coated minimum thickness 50 micron aluminium . Each 75.00
16.10 Providing and fixing expanded grill made of aluminum as per design
and drawing having members section of size 7.5mm x 6.0mm and
opening of size 102mm x 99mm to aluminum window/vent with
required screws, Y and H aluminium section (as per drawing) at the
ends and middle joints respectively complete in all respect as per
direction of engineer in charge.
16.10.1 Anodised aluminum (anodised transparent 81 dyed to required shade Sqm. 1775.00
according to IS : 1868. (Minimum anodic coating of grade AC 15,
Anodizing to be got done from approved Anodizer)

16.10.2 Powder coating aluminum ( minimum thickness of powder coating Sqm. 1843.00
50 micron)
16.10.3 Polyester Powder coating aluminum ( minimum thickness of Sqm. 1977.00
16.11 S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the Sqm 925.00
aluminium window by Aluminium beading 20x3mm with suitable
screws not exceeding 150mm distance at all heights with all lead and
lift with scafolding.
16.12 Providing and fixing vertical Blinds, headrail shall be oriented aluminum Sqm 1623.00
alloy 50 mm wide x 18 mm high the thickness shall be 1.2 mm. Control
unit shall be made of high grade polymer and shall be housed in side the
headrail, which shall transfer motion from chain tilter to tilt rod. Chain
tilter shall be made of plastic bead of diameter 4.5 mm through which 2
mm thick polyester code passes. Tilt rod shall be extruded aluminum
having 3 key ways. Runner shall be moulded plastic and shall have to
plastic wheels mounted on plastic axles to enable runner to slide
unhindered in headrail. Luver shall be made of fabric 100 mm colour fast
and shall have protective scotchgard coating to resist stains and dust.
Bottom mechanism consist bottom weight made of powder coated
galvanized steel for maximum corrosion resistance. The bottom weight
shall be attached with bottom.
BSR_B16 [177]
Chapter
Code No
1 2 3 4
16.13 Providing and fixing Horizontal blinds /Venation blind shall Sqm 1623.00
be cold rolled formed U shape 23 mm high x 25 mm wide with
flanged edges. It shall be made of heavy gaze 0.56 mm
galvanized steel, Slates shall be made of virgin Al. alloy
(having 3.5 – 4.5% of Mg. Content of width 25 mm. The slat
shall have dust guard paint coating, the chord lock shall be of
thick tomized steel and shall be securely attach in the head
rail. It shall provide locking arrangement of the cord. Tilt rod
shall be made of galvanized steel it shall have a D shaped with
an average cross section with diameter of 6 mm to achieve
minimum torsional deflection.
16.14 Providing and fixing Drapery rod shall be made of 20 gauge Rm 474.00
cold rolled steel strip, which is electrical resistance welded.
The section will be available 25.4 mm diameter the section
shall be coated with acid resistance polymer finish shall made
from ABS material in nearest matching colour of rod. The ring
shall be made from ABS material in nearest matching colour
to rod. Brackets made of galvanized steel.
16.15 Providing and fixing sun control film, thickness of film 1 Mil Sqm 639.00
Visible Light Transmittance 4-24% & Solar Energy
Transmittance 42-51% & Total solar Energy rejection 37-
43%of approved colour and shade , complete in all respect , at
all level , as directed by engineer- in -charge.
PVC ITEMS
16.16 Providing and fixing factory made of uPVC Extruded section

having an overall dimension as below (tolerance+/-1mm) with
wall thickness 2.0mm+/-0.2mm,corners of the door frame to
be mitred and welded of plastic ,galvanized brackets and stain
less steel screws.The hinge side vertical of the frames
reinforced by galvanized M.S.tube of size 19x19mm and
1mm+/-0.1mm wall thickness and 3 nos.stainless steel hinges
fixed to the frame complete as per manufacturers specification
and direction of Engineer-in-charge.
16.16.1 Extruded section profile size 48x40 mm Rm 196.00
16.16.2 Extruded section profile size 42x50 mm Rm 218.00
BSR_B16 [178]
Chapter
Code No
1 2 3 4
16.17 Providing and fixing to existing door frames 24mm thick factory Sqm 1761.00
made PVC door shutters made of stiles and rails of a uPVC hollow
section of size 59x24 mm and wall thickness 2mm +/- 0.2 mm with
inbuilt edging on both sides.The stiles and rails mitred and joined at
the corners by means of M.S.galvanized/plastic brackets of size
75x220mm having wall thickness 1.0mm+/- 0.1mm and stainless
steel screws. The stiles of the shutter reinforced by inserting
galvanized M.S.tube of size 20x20mm and 1mm +/-0.1mm wall
thickness. The lock rail made up of „H‟ section,a uPVC hollow
section of size 100x24mm and 2mm +/- 0.2mm wall thickness fixed
to the shutter stiles by means of plastic/ galvanized M.S.‟U‟
cleats.The shutter frame fitted with a uPVC multi-shambered single
panel of size not less than 610mm, having overall thickness of 20mm
and 1mm +/- 0.1mm wall thickness. The panels fitted vertically and
tie bar at two places by inserting horizontally 6mm galvanized
M.S.rod and fastened with nuts and washers, complete as per
manufacturer‟s specification and direction of Engineer-in-charge
(For W.C.and bathroom door shutter).
16.18 Providing and fixing to existing door frames 30mm thick Sqm 1829.00
factory made polyvinyl chloride (PVC) door shutter made of
stiles and rails of a uPVC hollow section of size 60x30 mm
and wall thickness 2mm +/- 0.2mm with inbuilt decorative
moulding edging on one side. The stiles and rails mitred and
joined and the corners by means of M.S.galvanized/plastic
brackets of size 75x220 mm having wall thickness 1.0mmand
stainless steel screws. The stiles of the shutter reinforced by
inserting galvanized M.S.tube of size 25x20 mm and 1mm +/-
0.1mm wall thickness. The lock rail made up of „H‟ section, a
uPVC hollow section of size 100x30 mm and 2mm +/- 0.2mm
wall thickness fixed to the shutter stiles by means of
plastic/galvanized M.S.tube „U‟ cleats. The shutter frame
filled with a uPVC multi-chambered single panel of size not
less than 610mm,having overall thickness of 20mm and
1mm+/- 0.1mm wall thickness.
The panels filled vertically and tie bar at two places by
inserting horizontally 6mm galvanized M.S.rod and fastened
with nuts and washers.complete as per manufacturer‟s
specification and direction of Engineer-in-charge.(For
W.C.and bathroom door shutter)
BSR_B16 [179]
Chapter
Code No
1 2 3 4
16.19 Providing and fixing factory made P.V.C. door frame of size Rm 277.00
50x47mm with a wall thickness of 5mm, made out of
extruded 5mm rigid PVC foam sheet mitred at corners and
joined with 2 Nos. of 150mm long brackets of 15x15mm M.S.
square tube, the vertical door profiles to be reinforced with
19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket
weather seal to be provided through out the frame. The door
frame to be fixed to the wall using M.S. screws of 65/100mm
size complete as per manufacturers specification and direction
of Engineer-in-Charge.
16.20 Providing and fixing to existing door frames.

16.20.1 30mm thick factory made solid panel PVC door shutter Sqm 3211.00
consisting of frame made out of M.S. tubes of 19 gauge
thickness and size of 19mm x 19mm for stiles and 15 mm
x15mm , top & bottom rails. M.S .frame shall have a coat of
steel primers of approved make and manufacture M.S. frame
covered with 5mm thick heat moulded PVC „C channel of size
30mm thickness, 70mm width out of which 50mm shall be flat
and 20mm shall be tapered in 45 degree angle on either side
forming stiles; and 5mm thick, 95mm wide PVC sheet out of
which 75 mm shall be flat and 20mm shall be tapered in 45
degree on the inner side to form top and bottom rail and
115mm wide PVC sheet out of which 75 mm shall be flat and
20mm shall be tapered on both sides to form lock rail. Top
bottom and lock rails shall be provided either side of the panel.
10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be
provided as gap insert for top rail & bottom rail. Panelling of
5mm thick PVC sheet to be fitted in the M.S. frame welded/
sealed to the stiles & rails with 7mm (5mm +2mm) thick x
15mm wide PVC sheet bending on inner side, and joined
together with solvent cement adhesive. An additional 5mm
thick PVC strip of 20mm width is to be stuck on the interior
side of the „C Channel using PVC solvent adhesive etc.
complete as per direction of Engineer-in-charge,
manufacture‟s specification & drawing.(For W.C.and
bathroom door shutter).
BSR_B16 [180]
Chapter
Code No
1 2 3 4
16.20.2 30mm thick factory made solid both side Pre laminated panel Sqm 3347.00
PVC door shutter consisting of frame made out of M.S. tubes
of 19 gauge thickness and size of 19mm x 19mm for stiles and
15x15mm top & bottom rails. M.S .frame shall have a coat of
steel primers of approved make and manufacture M.S. frame
covered with 5mm thick heat moulded PVC „C channel of size
30mm thickness, 70mm width out of which 50mm shall be flat
and 20mm shall be tapered in 45 degree angle on either side
forming stiles; and 5mm thick, 95mm wide PVC sheet out of
which 75mm shall be flat and 20mm shall be tapered on the
inner side to form top and bottom rail and 115mm wide PVC
sheet out of which 75 mm shall be flat and 20mm shall be
tapered on both sides to form lock rail. Top bottom and lock
rails shall be provided either side of the panel. 10mm (5mm x
2) thick, 20mm wide cross PVC sheet shall be provided as gap
insert for top rail & bottom rail. Panelling of 5mm thick PVC
sheet to be fitted in the M.S. frame welded/ sealed to the stiles
& rails with 7mm (5mm +2mm) thick x 15mm wide PVC
sheet bending on inner side, and joined together with solvent
cement adhesive. An additional 5mm thick PVC strip of 20mm
width is to be stuck on the interior side of the „C Channel
using PVC solvent adhesive etc. complete as per direction of
Engineer-in-charge, manufacture‟s specification &
drawing.(For W.C.and bathroom door shutter).
16.21 Providing and fixing of false ceiling with grid of M.S.tube Sqm 996.00
section of size 19mm X 19mm and with a wall thickness of
1mm+/- 0.2mm.The side pipe and the intermediate pipes is
fixed to the roof from the top with the help of ceiling
angles/wire grid shall be covered by the uPVC profile section
of size 6mm X 250mm with wall thickness of 0.80mm +/-
0.2mm,with the help of self tapping screw of 6mm X 13mm,
6mm X 19mm.Necessary cutouts for electric connections,
lighting, air conditioning etc, shall be provided at required
place. The perimeter edge shall be covered by extruded PVC
corner beading section of size 9mm X 28mm or 25mm
X30mm with a wall thickness of 1mm+/-0.2mm fixed by
applying cynoacrylic adhesive complete as per manufacturer‟s
specification and direction of Engineer-in-charge.
BSR_B16 [181]
Chapter
Code No
1 2 3 4
16.22 Providing and fixing of wall paneling on grid made out of Sqm 1394.00
PVC profile section of size 21x17mm with a wall thickness of
1.5mm+/-0.2mm,fixed on the existing wall with wood screw
of size 50mm X 8mm with rowel plug at a spacing of 900mm
center.uPVC profile section of size 150mm X 10mm with a
wall thickness of 1.0mm+/-0.2mm to be fixed on the grid by
self tapping screw of size 19mm X 6mm.Necessary cutouts for
electrical connection to be provided at required places. The
edge and periphery, finally to be covered by extruded PVC
beading section of size 28mm X 12mm with a wall thickness
of 1.0mm+/-0.2mm complete as per manufacture‟s
specification and direction of Engineer-in-charge.
16.23 Supply of “ Computer Table” of Modular nature having all the Each 7392.00
necessary arrangement for keyboard, CPU, UPS, Printer and
wire manager Table Top : The table top of size 900 x
600mm(WxD) would be made out of post formed on 25 mm
thick particle board with 0.7mm thick Carvica sheet in half
round post formed finish on the front and rear side, matching
color compensating laminate fixed on the bottom side. Other
two sides are edge banded and duly sealed with 1.5 mm thick
PVC edge banding of matching color with high pressure
through feed machine.
Keyboard Below the table top the keyboard pull out tray
having sliding arrangement fixed on side supporting legs with
450mm G.I. telescopic channel. Keyboard of size 750 x 450
made out of 18 mm thick Particle board laminate with 0.7mm
thick laminate sheet having all four sides Flat edge banded
and duly sealed with 1.5 mm thick PVC edge banding of
matching color with high pressure through feed machine. Side
Support :Two supporting side leg of size 600 x 750mm(WxH)
made out of post formed on 18 mm thick particle board with
0.7mm thick Carvica sheet in half round post formed finish on
two sides and other two sides are edge banded and sealed with
1.5mm thick PVC edge banding of matching color with high
BSR_B16 [182]
Chapter
Code No
1 2 3 4
CPU, UPS & Printer Places
Table having the provision for CPU of size 300 x 600 x
600mm(WxDxH) below the table top on the right side of table
adjoining to this on left side below the table the provision for
UPS of size 450 x 600 x 250mm (WxDxH) and above this the
provision for the Printer and stationary having overall
dimension of 450 x 600 x 300mm(WxDxH). All this is made
out of 18 mm thick Particle board laminate with 0.7mm thick
laminate sheet having all four sides flat edge banded and duly
sealed with 1.5 mm thick PVC edge banding of matching color
with high pressure through feed machine.
All the parts of the table are duly fixed with mini fix dowel
system with each other having matching drilled holes to be
made on CNC multi hole boring machine for proper matching
and alignment of the different part of the table, 4nos. of Self
Adjusting level screw of size 45 x 6mm are provide at the
bottom of the both legs for the proper leveling of the table.
16.24 Supply and fixing of Modular work Station with Partition Each 15545.00
32mm thick Aluminum top 25 mm thick particale board with
post forming three drawer pedestal unit one KBT or one CPU
trolley. Size 4800 x 1500 x 1200mm single seat in
combination
32mm thick Aluminum top 25 mm thick particle board with
four side edage banding one drawer and one open able shutter
pedestal unit one KBT or one CPU trolley. Size 6000 x 3000 x
1200mm single seat in combination
32mm thick Aluminum top 25 mm thick MDF board with
Membrane three drawer pedestal unit one KBT or one CPU
combination
post formed three drawer pedestal unit one KBT or one CPU
combination
(Rate of this item is effective from 01.12.2016)
BSR_B16 [183]
Chapter
Code No
1 2 3 4
32mm thick Aluminum top 25 mm thick MDF board with
Membrane three drawer pedestal unit one KBT or one CPU
combination
32mm thick Aluminum top 25 mm thickparticle board with
post formed one drawer or one open able shutter pedestal unit
one KBT or one CPU trolley. Size 4500 x 3000 x 1200mm
single seat in combination
post formed three drawer pedestal unit one KBT or one CPU
combination
four side edage banding 1200mm height storage unit with two
drawer one KBT or one CPU trolley. Size 1500 x 3000 x
32mm thick Aluminum top 25 mm thick particale board with
post formed three drawer one KBT or one CPU trolley. Size
2100 x 2100 x 1200mm single seat in combination
post formed legs 18mm particle board with four side edge
banding one KBT or one CPU trolley. Size 2100 x 2100 x
post formed legs 18mm particle board with four side edge
banding with three drawer one KBT or one CPU trolley Two
1200mm height storage unit. Size 6000 x 3000 x 1200mm
single seat in combination
BSR_B16 [184]
Chapter
Code No
1 2 3 4
post formed one drawer or one open able shutter one KBT or
one CPU trolley Two 1200mm height storage unit. Size 3000 x
2700 x 1200mm single seat in combination
22mm thick Aluminum top 25mm thick particle board with
BSR_B16 [185]
Chapter
Code No
1 2 3 4
16.40 Providing and fixing Structural glazing work with toughened Sqm 5381.00
glass of 6mm thick and reflective colour as approved in dark
shade like Blue/Dark Blue etc. with frame work of curtain
section 65x60mm (Weight 1.64 kg/m min.) made of
aluminium with chrome plating. Internal frame work will also
be of curtain section 65x60mm of chrome plated aluminium
section with20x20mm aluminium tube section and structural
spacer made of rubber. The aluminium frame work size as per
instruction of Engineer-in-charge and including openable
panels with all necesary sections and fitting.The work include
silicon structural adhesive for complete gripping of glass with
framing members and silicon weather seal sealant to prevent
moisture/water through joints. Glass will be fixed in plumb
and with uniform spacing of 10-12mm wide duly filled with
silicon weather seal sealant. The work includes all
labour,scaffolding , structural aluminium work, toughened
glasses,silicon weather seal sealant, silicon structural adhesive
structural spacer, all accessories like handles, peg stays, M-15
grade cement concrete for fixing holdfast .(Face area of glass
shall be measured)
16.41 Supply and fixing of polycrete wall fencing of existing wall, Sqm 2570.00
fencing of 0.9 mtr. Height above the existing wall, main
member PVC profile section of size 125mmx125mmx900mm
(c/c 1.67 mtr. length) with a wall thickness of
2.00mm+0.20mm and Horizontal panel PVC profile section of
size 305mmx20mm (3 nos. 1.6 mtr. length) with wall thickness
1.00mm + 0.1mm and side edge covered with PVC C-Section
of size 24mm x18mm with a wall thickness of
2.00mm+0.20mm Horizontal panel reinforced with G.I.
section (C-Type) with a wall thickness of 1.20+0.10mm and
horizontal panel having side in main member groove (vertical
pillar 125x125mm) all complete as per design specification
and as direction by Engineer in charge.
BSR_B16 [186]
Chapter
Code No
1 2 3 4
16.42 Providing and fixing of uPVC casement fixed windows or ventilators Sqm 5128.00
manufactured in ISO 9001:2000 & 14001:2004 certified company.
Frame : Made from the Extruded uPVC Window Profile Section of size
60 x 60mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3
box multi-chamber construction, White in finish, duly reinforced with
1.2mm thick G/J/U/O TYPE GI section. All the four corners shall be
mitered cut & thermal welded so as to form window frame. Frame shall
be milled with drain and air equalizer hole in order to be water tight and
for drainage of accumulated water, if any, to outer side. Fix Mullion
made of 76 x 60mm uPVC Profile Section with steel reinforcement shall
be provided in windows as per the requirement. Frame shall have „O‟
type EPDM gasket fitted in in-built groove of frame profile for proper
air & sound insulation of the shutter. Glazing bead of size 34 x 20mm
with „K‟ & „O‟ type inner
and outer EPDM weather seal gaskets alongwith 5mm thick
ISI make plain float glass.All welding joints of frame and
shutter shall be cleaned and milled with the CNC mechanism
to provide uniform grooved finish on all visible joints.
Hardware : Installation at Site : Complete window is to be
installed on site with 10 x 100mm fastners with white cap in
existing pre-finished wall cut-out cemented to glass level plane
at all height & width and silicon glue is applied to fill up the
crevices between wall and window frame. Complete in all
respect as per the drawing and specifications and direction of
engineer-in-charge.
16.43 Providing and fixing expanded grill made of aluminum as per design
and drawing having members section of size 7.5mm x 6.0mm and
opening of size 75mmx72mm to aluminum window/vent with
required screws, Y and H aluminium sec (as per drawing) at the ends
and middle joints respectively complete in all respect as per direction
of engineer in charge.
16.43.1 Anodised aluminum (anodised transparent 81 dyed to required shade Sqm 1843.00
according to IS : 1868. (Minimum anodic coating of grade AC 15,
Anodizing to be got done from approved Anodizer) Anodised
aluminum (anodised transparent 81 dyed to required shade according
to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to
be got done from approved Anodizer)
16.43.2 Powder coating aluminum ( minimum thickness of powder Sqm 1910.00

coating 50 micron)
16.43.3 Polyester Powder coating aluminum ( minimum thickness of Sqm 2044.00

BSR_B16 [187]
Chapter
Code No
1 2 3 4
16.44 Providing and fixing expanded grill made of aluminum as per

design and drawing having members section of size 7.5mm x
6.0mm and opening of size 50mmx48mm to aluminum
window/vent with required screws, Y and H aluminium
section (as per drawing) at the ends and middle joints
respectively complete in all respect as per direction of
engineer in charge.
16.44.1 Anodised aluminum (anodised transparent 81 dyed to required Sqm 1910.00
Anodizer)
16.44.2 Powder coating aluminum ( minimum thickness of powder Sqm 1977.00

coating 50 micron)
16.44.3 Polyester Powder coating aluminum ( minimum thickness of Sqm 2111.00

16.45 Providing and fixing of uPVC Sliding windows: Frame Made Sqm 8443.00
from the Extruded uPVC Window Profile Section of size
106w x 50h mm having outer wall thickness of 2.5mm (+/-
0.2mm) and 3 box multi-chamber construction, White in
finish, duly reinforced with 1.2 mm thick GI section. Frame
shall have three track configuration, two for sliding of window
shutter and one for mosquito mesh shutter. Vertical member of
frame which bears the sliding shutter load shall have
aluminium rail/track for smooth sliding of shutter rollers. All
the four corners shall be mitered cut & thermal welded so as to
form window frame. Frame shall be milled with drain and air
equalizer hole in order to be water tight and for drainage of
accumulated water, if any, to outer side.
Shutter : The shutter of sliding window shall be made of 39w
x 69h mm Extruded 3 box multi- chamber uPVC Window
Profile Section of white colour having outer wall thickness of
2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm
thick GI section duly mitered cut & thermal welded at all
corners and fitted with uPVC glazing bead of size 22 x 20 mm
with inner and outer co-extruded EPDM/TPE-E weather seal
BSR_B16 [188]
Chapter
Code No
1 2 3 4
16.46 Providing and fixing of uPVC Sliding windows: Frame Made from the Sqm 11570.00
Extruded uPVC Window Profile Section of size 106w x 50h mm having
outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber
construction, Laminated (colour) finish, duly reinforced with 1.2 mm thick
GI section. Frame shall have three track configuration, two for sliding of
window shutter and one for mosquito mesh shutter. Vertical member of
frame which bears the sliding shutter load shall have aluminium rail/track
for smooth sliding of shutter rollers. All the four corners shall be mitered
cut & thermal welded so as to form window frame. Frame shall be milled
with drain and air equalizer hole in order to be water tight and for drainage
of accumulated water, if any, to outer side.
Shutter : The shutter of sliding window shall be made of 39w x 69h mm
Extruded 3 box multi- chamber uPVC Window Profile Section of
laminated ( colour) having outer wall thickness of 2.5mm (+/- 0.2mm)
provided with reinforcement of 1.5mm thick GI section duly mitered cut &
thermal welded at all corners and fitted with uPVC glazing bead of size 22
x 20 mm with inner and outer co-extruded EPDM/TPE-E weather seal
gaskets alongwith 6mm thick ISI make plain float glass. Mesh shutter shall
be made of 39w x 69h mm Extruded 3 box multi-chamber UPVC Window
profile section of laminated ( colour) having outer wall thickness of 2.5mm
(+/- 0.2mm) provided with reinforcement of 1.5 mm thick GI section duly
mitered cut & thermal welded at all corners and fitted with nylon/polymer
mesh and rollers/pully.
0.2mm) and 3 box multi-chamber construction, White in
finish, duly reinforced with 1.2 mm thick GI section. Frame
shall have three track configuration, Vertical member of frame
which bears the sliding shutter load shall have aluminium
rail/track for smooth sliding of shutter rollers. All the four
corners shall be mitered cut & thermal welded so as to form
window frame. Frame shall be milled with drain and air
Profile Section of white colour having outer wall thickness of
2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm
corners and fitted with uPVC glazing bead of size 22 x 20 mm
with inner and outer co-extruded EPDM/TPE-E weather seal
gaskets alongwith 6mm thick ISI make plain float glass.
BSR_B16 [189]
Chapter
Code No
1 2 3 4
0.2mm) and 3 box multi-chamber construction, Laminated
(colour) finish, duly reinforced with 1.2 mm thick GI section.
Frame shall have three track configuration, Vertical member
of frame which bears the sliding shutter load shall have
aluminium rail/track for smooth sliding of shutter rollers. All
the four corners shall be mitered cut & thermal welded so as to
form window frame. Frame shall be milled with drain and air
Profile Section of laminated (colour) having outer wall
thickness of 2.5mm (+/- 0.2mm) provided with reinforcement
of 1.5mm thick GI section duly mitered cut & thermal welded
at all corners and fitted with uPVC glazing bead of size 22 x
20 mm with inner and outer co-extruded EPDM/TPE-E
weather seal gaskets alongwith 6mm thick ISI make plain float
glass.
16.49 Providing and fixing of UPVC casement openable windows Sqm 9118.00
(outward / inward): Outer Frame made from the Extruded
UPVC Windows profile section of size 60w X 60h mm having
outer wall thickness of 2.5mm (+/- 0.2mm) and three chamber
constuction, White in finish, duly reinforced with 1.5mm thick
GI section. All the four corners shall be mitered cut & thermal
welded so as to form window frame. Frame shall be milled
with drain and air equalizer hole in order to be water tight and
for drainage of accumulated water, if any, to outer side. Fix
Mullion made of 60w X 80h mm UPVC profile section with
steel reinforcement shall be provided in windows having 2 or
more openable shutters, as per the requirement. Frame shall
have co-extruded with EPDM/TPE-E gasket fitted in in-built
groove of frame profile for proper air & sound insulation of
the shutter.
Shutter:
BSR_B16 [190]
Chapter
Code No
1 2 3 4
The shutter of outward openable window shall be made of size 60w X

74h mm and shutter of inward openable window shall be made of size
60w x 77h mm Extruded 3 box multi-chamber UPVC Window profile
section of white colour having outer wall thickness of 2.25mm (+/-
0.2mm) provided with reinforcement of 1.5mm thick GI section duly
mitered cut & thermal welded at all corners and fitted with UPVC
glazing bead of size 36 X 20mm with inner and outer co-extruded
EPDM/TPE-E weather seal gasket alongwith 6mm thick ISI make plain
float glass. All welding joints of frame and shutter shall be cleaned and
milled with the CNC mechainism to provide uniform grooved finish on
all visible jaints. Hardware: Window shutter are fixed with frame on
2.5mm thick SS301 Grade friction hinge system to keep the window
opened at desired angle. Friction Hinge also enables easy cleaning of
glass on both side from the inside of building.
16.50 Providing and fixing of UPVC casement openable windows (outward / Sqm 13474.00
inward): Outer Frame made from the Extruded UPVC Windows profile
section of size 60w X 60h mm having outer wall thickness of 2.5mm (+/-
0.2mm) and three chamber constuction in Laminated (colour) finish,
duly reinforced with 1.5mm thick GI section. All the four corners shall
be mitered cut & thermal welded so as to form window frame. Frame
shall be milled with drain and air equalizer hole in order to be water
tight and for drainage of accumulated water, if any, to outer side. Fix
Mullion made of 60w X 80h mm UPVC profile section with steel
reinforcement shall be provided in windows having 2 or more openable
shutters, as per the requirement. Frame shall have co-extruded with
EPDM/TPE-E gasket fitted in in-built groove of frame profile for proper
air & sound insulation of the shutter.
Shutter: The shutter of outward openable window shall be made of size
60w X 74h mm and shutter of inward openable window shall be made of
size 60w x 77h mm Extruded 3 box multi-chamber UPVC Window
profile section of laminated( colour) having outer wall thickness of
2.25mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI
section duly mitered cut & thermal welded at all corners and fitted with
UPVC glazing bead of size 36 X 20mm with inner and outer co-
extruded EPDM/TPE-E weather seal gasket alongwith 6mm thick ISI
make plain float glass. All welding joints of frame and shutter shall be
cleaned and milled with the CNC mechainism to provide uniform
grooved finish on all visible joints. Hardware: Window shutter are fixed
with frame on 2.5mm thick SS301 Grade friction hinge system to keep
the window opened at desired angle. Friction Hinge also enables easy
cleaning of glass on both side from the inside of building.
BSR_B16 [191]
Chapter
Code No
1 2 3 4
16.51 Providing and fixing of UPVC casement fully (french) open-able windows Sqm 11027.00
(outward / inward) : Frame made from the Extruded UPVC Windows
profile section of size 60w X 60h mm having outer wall thickness of 2.5
mm (+/- 0.2mm) and 3 box multi-chamber constuction, White in finish,
duly reinforced with 1.5 mm thick G/J/U/O TYPE GI section. All the four
corners shall be mitered cut & thermal welded so as to form window frame.
Frame shall be milled with drain and air equalizer hole in order to be water
tight and for drainage of accumulated water, if any, to outer side. Fix
Mullion made of 60w X 80h mm UPVC profile section with steel
reinforcement shall be provided for the fix portion of the window and for
the window area having 2 or more openable shutters / fix part as per the
requirement. Frame shall have co-extruded EPDM/TPE-E gasket fitted in
in-built groove of frame profile for proper air & sound insulation of the
shutter.
size 60w X 77h mm Extruded 3 box multi-chamber UPVC Window profile
section of white colour having outer wall thickness of 2.5 mm (+/- 0.2mm)
provided with reinforcement of 1.5 mm thick GI section duly mitered cut &
thermal welded at all corners. shutter as well as fix part of the window shall
be fitted with UPVC glazing bead of size 36 X 20 mm with inner and outer
co-extruded EPDM/TPE-E Gasket.
16.52 Providing and fixing of UPVC casement fully (french)open-able windows Sqm 14272.00
Laminated Profile ( Colour ) (outward / inward) : Frame made from the
Extruded UPVC Windows profile section of size 60w X 60h mm having
outer wall thickness of 2.5 mm (+/- 0.2mm) and 3 box multi-chamber
constuction, Laminated(colour) finish, duly reinforced with 1.5 mm thick
GI section. All the four corners shall be mitered cut & thermal welded so as
to form window frame. Frame shall be milled with drain and air equalizer
hole in order to be water tight and for drainage of accumulated water, if
any, to outer side. Fix Mullion made of 60w X 80h mm UPVC profile
section with steel reinforcement shall be provided for the fix portion of the
window and for the window area having 2 or more openable shutters / fix
part as per the requirement. Frame shall have co-extruded EPDM/TPE-E
gasket fitted in in-built groove of frame profile for proper air & sound
insulation of the shutter.
size 60w X 77h mm Extruded 3 box multi-chamber UPVC Window profile
section of laminated (colour) having outer wall thickness of 2.5 mm (+/-
0.2mm) provided with reinforcement of 1.5 mm thick GI section duly
mitered cut & thermal welded at all corners. shutter as well as fix part of
the window shall be fitted with UPVC glazing bead of size 36 X 20 mm
with inner and outer co-extruded EPDM/TPE-E Gasket.
BSR_B16 [192]
Chapter
Code No
1 2 3 4
16.53 Providing and fixing of openable uPVC Doors with or without Sqm 9930.00
fix top: Frame Made of Extruded uPVC Window Profile
Section of size 60w x 70h mm having outer wall thickness of
2.75mm (+/- 0.2mm) and 3 box multi-chamber construction,
White in finish, duly reinforced with 1.2mm thick GI section.
All the corners shall be mitered cut & thermal welded so as to
form door frame. Fix Mullion made of 60w x 80h mm uPVC
Profile Section with steel reinforcement shall be provided for
the top fix portion of the doors or in case of the doors having
more than two openable shutters, as per the requirement /
drawing. Frame of openable door shall have „O‟ type EPDM
gasket fitted in in-built groove of frame profile for proper air
& sound insulation of the shutter. Shutter : The shutters of
openable door shall be made of 60w x 95h mm Extruded 3 box
multi-chamber uPVC Window Profile Section of white colour
having outer wall thickness of 2.75mm (+/- 0.2mm) provided
with reinforcement of 2.0 mm thick GI section duly mitered
cut & thermal welded at all corners, provided with center
mullion (if specified in drawing) of size 60w x 80h mm uPVC
Profile Section and fitted with uPVC glazing
bead of size 36 x 20mm with inner and outer co-extruded
EPDM/TPE-E weather seal gaskets alongwith 6mm thick ISI
make plain float glass.
All welding joints of frame and shutter shall be cleaned and
milled with the CNC mechanism to provide uniform grooved
finish on all visible joints. Hardware: Each openable door
shutters is to be fixed with three load beading butt hinges and
locking of doors is to be provided with multi-point
transmission gear (ESPAG) with white finish powder- coated
lockable handle. Installation at site: Complete door is to be
installed on site with 10 X 100mm fastners with white cap in
crevices between wall and door frame. Complete in all respect
as per the drawing and specification and direction of engineer-
in-charge.
BSR_B16 [193]
Chapter
Code No
1 2 3 4
16.54 Providing and fixing of openable uPVC Doors with or without Sqm 13558.00
fix top: Frame Made of Extruded uPVC Window Profile
Section of size 60w x 70h mm having outer wall thickness of
2.75mm (+/- 0.2mm) and 3 box multi-chamber construction,
Laminated (colour) finish, duly reinforced with 1.2mm thick
GI section. All the corners shall be mitered cut & thermal
welded so as to form door frame. Fix Mullion made of 60w x
80h mm uPVC Profile Section with steel reinforcement shall
be provided for the top fix portion of the doors or in case of
the doors having more than two openable shutters, as per the
requirement / drawing. Frame of openable door shall have co-
extruded EPDM/TPE-E gasket fitted in in-built groove of
frame profile for proper air & sound insulation of the shutter.
Shutter : The shutters of openable door shall be made of 60w x
95h mm Extruded 3 box multi-chamber uPVC Window Profile
Section of laminated( colour) having outer wall thickness of
2.75mm (+/- 0.2mm) provided with reinforcement of 2.0 mm
corners, provided with center mullion (if specified in drawing)
of size 60w x 80h mm uPVC Profile Section and fitted with
uPVC glazing
bead of size 36 x 20mm with inner and outer co-extruded
EPDM/TPE-E weather seal gaskets alongwith 6mm thick ISI
make plain float glass.
All welding joints of frame and shutter shall be cleaned and
milled with the CNC mechanism to provide uniform grooved
finish on all visible joints. Hardware: Each openable door
shutters is to be fixed with three load beading butt hinges and
locking of doors is to be provided with multi-point
transmission gear (ESPAG) with white finish powder- coated
lockable handle. Installation at site: Complete door is to be
installed on site with 10 X 100mm fastners with white cap in
crevices between wall and door frame. Complete in all respect
as per the drawing and specification and direction of engineer-
in-charge.
BSR_B16 [194]
Chapter
Code No
1 2 3 4
16.55 Providing and Fixing Aluminium composite panel of Sqm 2594.00

approved make 3mm thick with 0.5mm thick skin & PVDF
coated approved shade for wall panelling. Main framing work
to be done using 50mmx25mmx1.6mm tubular section of
approved make. Stainless steel screw to be used to fix the ACP
panel to be fixed to the main frame with industrial adhesive
tape and panel groove to be sealed with weather proof silicon
sealant suitable for glass/aluminium etc. complete in all
respect as approved by Engineer-in-charge.
16.56 Providing and fixing stainless steel railing made of Hollow

tubes, channels, plates etc., including welding, grinding,
buffing, polishing and making curvature (wherever required)
and fitting the same with necessary stainless steel nuts and
bolts complete, i/c fixing the railing with necessary
accessories & stainless steel dash fasteners , stainless steel
bolts etc., of required size, on the top of the floor or the side of
waist slab with suitable arrangement as per approval of
Engineer-in-charge, (for payment purpose only weight of
stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.).
(a) Grade 304 Kg. 503.00
(b) Grade 204 Kg. 432.00
16.57 Supply & Fixing of superior quality wall covering decorative Sqm 450.00
paper of composition of paper and synthetic blend and
providing material such as fevicol, cmc powder, chemical and
water for fixing the wall paper as per enclosed photograph and
direction Engineer-in Charge.
16.58 Supplying and fixing Rollor Blinds of good quality and Sqm 1700.00
approved make made out of Imported fabric including Roller
Mechanism and lock with chain system with all necessary
hooks etc. complete as per direction and sample approved by
engineer-in-charge.
16.59 Providing & Fixing Aluminium composite panel of indo Sqm 929.00
bond/euro/flexi bond of equivalent made 3mm that with
0.5mm thick skin& PVDF coated of approved shads for toilet
door in double layer in Aluminium frame complete in all
respect as per sample approved by Engineer in Charges.
BSR_B16 [195]
Chapter
Code No
1 2 3 4
16.60 Providing & Fixing brass handle 125mm with plate Nos. 195.00
175x22mm with screw complete in all respect as per direction
of Engineer in charges.
16.61 Labour Charges for removing and refixing Aluminium Partitions Sqm 275.00
door including minor repair on alteration in the same.
16.62 Providing factory made pvc internal door frame of size Rmt 500.00
100mm x 45mm with a wall thickness of 5mm (±0.25), made
out of extruded 5mm (±0.25) thick PVC Sheet of Density 600
Kg /Cbm Manufactured by an ISO-9001-2015 certified
Company,and by joining 3nos. heat bent PVC sheet
sections.The inside section of size 90x30mm shall be made
from plain colour PVC sheet of 5mm (±0.25) thickness. The
inside section will be covered by sticking two sections of size
30x35mm and 70x45mm made from 5mm (±0.25) thick plain
PVC sheet. The frame shall be mitre cut at two corners and
joined with 4nos. of 150mm long brackets of 15mm x 15mm
M.S. Square tube.
The two vertical door frames are to be reinforced with 40mm x
20mm M.S. tube of 19 guage through out the frame. The door
frame shall be fixed to the wall using 8/100mm long M.S.
Screws through the frame by using anchor fastners. A
minimum of 4nos. of screws to be provided for each vertical
member & minimum 2nos. for horizontal member etc.
complete as per manufactures specification and direction of
Engineer-in-charge.
16.63 Providing Factory Made 100% Solid WPC (Wood polymer Sqm 1450.00
Composite) Board of 12MM of Single Side Lamination (
14 Micron ) required size comprising of virign PVC resin of
K Value 58-60 ( Suspemsion Grade), Calcium Corbonate and
natural Fibers ( Wood Powders/ rice husk/ wheat husk) and
Non toxic additives , made from Extrusion process WPC foam
sheet Single Extruded ( Inner) with density not less than 550
kg/cbm manufactured by an ISO 9001 - 2015 Certified
Company, having good screw holding capacity ( Screw
Withrawal strength of 1800 N ( Face) & 900 N ( Edge),
Minimum Compissive Stength of 58 N/mm2, Modulus of
elasticity 900N/mm2 and resistance of spread of flam of Class
A caegory wih Property of being Termite/ Borer Free
BSR_B16 [196]
Chapter
Code No
1 2 3 4
Water/ Moisture Proof and Fire Retardant and fixinng
stainless Steel butt hinges of required size with necessary full
body threaded star headed counter sunk SS Screws. All as per
direction of Engineer -In-Charge, Material test certificate and
authentication should be compulsory provided by the
manufacturing company : For KITCHEN CABINET &
CUPBOARDS.
16.64 Providing Factory Made 100% Solid WPC (Wood polymer Sqm 1650.00
Composite) Board of 18mm thicknesss of required size
comprising of virign PVC resin of K Value 58-60 (
Suspemsion Grade), Calcium Corbonate and natural Fibers (
Wood Powders/ rice husk/ wheat husk) and Non toxic
additives , made from Extrusion process WPC foam sheet
Single Extruded ( Inner) with density not less than 550 kg/cbm
manufactured by an ISO 9001 - 2015 Certified Company,
having good screw holding capacity ( Screw Withrawal
strength of 1800 N ( Face) & 900 N ( Edge), Minimum
Compissive Stength of 58 N/mm2, Modulus of elasticity
900N/mm2 and resistance of spread of flam of Class A
caegory wih Property of being Termite/ Borer Free.Water/
Moisture Proof and Fire Retardant and fixinng stainless Steel
butt hinges of required size with necessary full body threaded
star headed counter sunk SS Screws.
All as per direction of Engineer -In-Charge, Material test
certificate and authentication should be compulsory provided
by the manufacturing company : For KITCHEN CABINET &
CUPBOARDS..
16.65 Providing & fixing factory made 100% Solid WPC (Wood Rmt 550.00
Polymer Composite) Door Frame 90mm x 45 mm ( Moulded )
Single Rebated,, made from Wood Polymer Composite (Single
Extruded Process) material comparising of virign PVC
polymer of K Value 58-60 ( Suspemsion Grade), Calcium
Corbonate and Natural Fibers ( Wood Powder/ Rice Husk/
Wheat Husk) and Nor toxic additives fabricated with meter
Joints after applying PVC solvent Cement & screwed with full
body treaded star headed srews having minimum frame density
of 780 kg/ cbm & manufactured by an ISO 9001 - 2015
Certified Company, having good screw holding capacity (
Screw Withrawal strength of 2200 N ( Face) & 1100 N (
Edge),
BSR_B16 [197]
Chapter
Code No
1 2 3 4
Minimum Compissive Stength of 58 N/mm2, Moduus of
elasticity 900N/mm2 and resistance to spread of flame of class
A category with property of being termite / borer proof , water
/ Moisture Proof & Fire retardant & Fixed in postion with SS
Dash Fasterns / Hold Fast of reuired dia and lenght, all as per
specifications drawings as directed by the Engineer-In-Charge.
Material test certificate and authentication should be
compulsory provided by the manufacturing company ( Hold
Fast or Dash Fastners shall be paid seperately)
16.66 Providing and fixing thermal insulation with Resin Bonded Sqm 179.00
rock wool conforming to IS:8183, having density 48 kg/m3, 50
mm thick, fixed on the roof top with screws, rawel plug &
washers and held and in position by criss crossing GI wire etc.
complete as per directions of Engineer-in-charge.
BSR_B16 [198]
CHAPTER : B-17
ADDITIONAL MISCELLANEOUS ITEMS
Chapter
Code No
1 2 3 4
17.1 Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture Sqm 689.00
out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum
alloy coated galvalume steel (as per 150gsm zinc aluminum coated 550Mpa
tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens
30mm high NB at 250 centre and centre width of 1020mm sheets be casted
with regular modified polyster system on a continuous with line on centre
for face and with a polyster coating respectively sheet shall have
proportionality with siphoned plate made to prevent leakage sheet shall be
fixed by more of sell drilling lift tapping hot dip zinc coated hox head
fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one
length and for a minimum up to 12mts with all scaffolding.
17.1.1 Add extra for 0.60mm TCT (Total Coated Thickness) high tensile Zinc Sqm 15%
aluminum alloy coated galvalume steel sheet in place of 0.50mm thick
17.1.2 Add extra for 0.80mm TCT (Total Coated Thickness) high tensile Zinc Sqm 45%
aluminum alloy coated galvalume steel sheet in place of 0.50mm thick
17.2 Supply and Installation of ROOF – PREFABRICATED INSULATED

PPGL FACE PANEL:
Roof: Insulated sandwich panels for roof of total thickness mentioned
below exclusive of crest height of top corrugation. Panel shall be made of
0.50mm (+/-0.04mm) thick pre coated metal sheet on both sides of rigid
polyurethane insulation. The top external facing metal sheet shall have
corrugated shape with crest. The trapezoidal shape crowns/crest height
should not be less than 30mm. The pre-coated metal sheet shall be PPGL
(Pre Painted Galvalume Sheet with AZ coating) sheet having SDP (Super
Durable Polyester) colour coat of 18 micron (min). The bottom sheet must
have tongue and groove type flange (U shape) of 8mm x 8mm on groove
side and 8mm x 12mm on tongue side. Flange must be on lengthwise sides
for joining adjacent panels. Panel's bottom side PPGL sheet must also be
pre-strengthened by full lengthwise stiffening with semi-circular beading of
12mm width & 3 to 4mm depth at 240 (+/-5) mm pitch. The top corrugated
sheet must have at-least one open crown/crest for overlapping adjacent
panel widthwise.
Similarly the top corrugated sheet must have suitable open extension of min
6” on bottom widthwise side of panel for overlapping further panels joined
lengthwise also. The insulation core shall be self-extinguishing DIN
4102,Class B3 fire retardant class rigid PUR with thermal conductivity of
0.025 W/mK and with initial density of 40kg/m3 (+/-2kg) suitable for
temperature range of -30 degree C to +80 degree C. The panel must be
made using glue-free high pressure hot pressing self-bonding method.
PPGL sheet on both sides of panel shall have a min15 micron protective
plastic guard film to avoid scratches during transportation.
Thickness 65mm (+/- 2mm) Sqm. 2521.00
BSR_17 [199]
Chapter
Code No
1 2 3 4
17.3 Supply and Installation of WALL – PREFABRICATED INSULATED
PPGL PANEL:
Walls: Insulated sandwich panels for wall of total thickness mentioned
below. Panel shall have 0.50mm (+/-0.04mm) thick pre coated metal sheet
on both sides of rigid PUR insulation. The pre-coated metal sheet shall be
PPGL (Pre Painted Galvalume Sheet with AZ coating) sheet having SDP
(Super Durable Polyester) colour coat of 18 micron (min). The panels shall
be vertically joined together with adjacent panel by tongue and groove
joints. For joining, wall panel's metal sheet facings must have lengthwise
flange (U shape) of 8mm x 8mm on groove side and 8mmx12mm on
tongue side of panel. The pre-coated metal sheet (PPGL) must also be pre-
strengthened by full lengthwise stiffening with semi-circular beading of
12mm width & 3 to 4mm depth at 240 (+/-5) mm pitch. Panels may have
optional provision for inbuilt electrical conduit running lengthwise
atvertical center of specified panels.
The insulation core shall be self-extinguishing DIN 4102,Class B3 fire
retardant class rigid PUR with thermal conductivity of 0.025 W/mK and
with density of 40kg/m3 (+/-2kg) suitable for temperature range of -30
degree C to +80 degree C. The panel must be made using glue-free high
pressure pressing self-bonding method. PPGL sheet on both sides of panel
shall have a min15 micron protective plastic guard film to avoid scratches
during transportation.
17.4 Supply and Installation of WALL – PREFABRICATED INSULATED

CEMENT FACE PANEL:
Factory-readymade structural reinforced insulated wall panel of
thickness mentioned below. Panel shall be made of 6mm (+/-0.6mm)
thick asbestos-free fiber cement sheet/ Cement bonded particle board as
per IS:14276:1995 on both sides of rigid PUR insulation. The wall panel
shall be vertically joined together with adjacent panel by biscuit joints
lengthwise with suitable construction adhesive. Joining member (biscuit)
shall be made of approx 12mm thick cement sheet /Cement bonded
particle board as per IS:14276:1995. Panels may have optional provision
for inbuilt electrical conduit running lengthwise at vertical center of
specified panels. Both vertical lengthwise sides of panels must have full
length MS tubes of min 1.0mm thickness for better structural
strength.The final panel surface must be free from undulations.
The Insulating core shall be self-extinguishing DIN 4102,Class B3 fire
pressure hot pressing self-bonding method and shall be free from major
surface undulations.
BSR_17 [200]
Chapter
Code No
1 2 3 4
17.5 Supply and Installation of WALL – PREFABRICATED

INSULATED LAMINATED FACE PANEL:
Factory-readymade interior wall panel of thickness mentioned below.
The panels shall have suitable provision for joining adjacent panels.
Interior panels may have optional provision for inbuilt electrical
conduit running lengthwise at vertical center of specified panels. The
insulation core shall be self-extinguishing DIN 4102,Class B3 fire
retardant class rigid PUR with thermal conductivity of 0.025 W/mK
and with density of 40kg/m3 (+/-2kg) suitable for temperature range
of -30 degree C to +80 degree C. The panel must be made using glue-
free high pressure hot pressing self-bonding method and shall be free
from major surface undulations. both sides of panel shall have a
min15 micron protective plastic guard film to avoid scratches during
transportation.
1. Panel shall be made of min 4mm (+/- 0.5mm) thick laminated
wood based medium density fiber board sheet on both sides of rigid
PUR insulation.
17.6 Supply and Installation of SMALL ROOM (TOILET & GUARD

ROOM) – PREFABRICATED INSULATED PPGL FACE PANEL:
Insulated closed lip panels (for door, wall and roof) of thickness
mentioned below. Panel shall have 0.50mm (+/-0.04mm) thick pre-
coated metal sheet on both sides of rigid PUR insulation. The pre-coated
metal sheet shall be PPGL (Pre Painted Galvalume Sheet with AZ
coating) sheet having SDP (Super Durable Polyester) colour coat of 18
micron(min). The Pre coated metal sheet on both sides must be pre-
strengthened by full lengthwise stiffening with semi-circular beading of
12mm wide & 3mm depth at 240 (+/-5) mm pitch. Panels shall have
closed lengthwise sides made by right angle flange on both side of Pre
coated metal sheets, free from cap type covers. The top and bottom part
on widthwise sides of panels must have full width MS Square tube insert
of (min 25mm x 1.0mm) for better screw retention and strength.
The insulation core shall be self-extinguishing DIN 4102,Class B3 fire
pressure hot pressing self-bonding method free from major undulations.
PPGL sheet on both sides of panel shall have a min15 micron protective
plastic guard film to avoid scratches during transportation.
Thickness of 32mm (+/-2mm) Sqm. 2261.00
Thickness of 50mm (+/-2mm) Sqm. 2427.00
BSR_17 [201]
Chapter
Code No
1 2 3 4
17.7 AccessoriesSupply and Installation of (Labour rate
included in main item) Bottom and Top U track :
U-track for mounting panels with floor. The channel shall be RMT 220.00
made from minimum 1.15 mm thick PPGL sheet with flange
height of minimum 35 mm and width as per thickness of panel
used.
17.7.1 Flashings (inner and outer):

Corner angle flashings of equal shape for covering various
corners and open sides of panels. Flashings shall be made from
0.5mm thick pre-coated PPGL sheet in following sizes:
50mm x 50mm RMT 165.00
100mm x 100mm RMT 220.00
17.7.2 Roof Ridge Cap:

Ridge flashing for roof panels shall be made from 0.5mm thick
pre-coated PPGL sheet of
200mm x200 mm. RMT 220.00
17.7.3 Roof Front Corrugated Cap:

Front side flashing for roof panels (corrugated trapazodial RMT 220.00
shape) shall be made from 0.5mm thick pre-coated PPGL
sheet.
17.7.4 Roof End Cap:

End cap for closing ends of roof panels made from 0.5mm RMT 165.00
thick PPGL sheet.
17.7.5 Frame for Door/Window:

Frame shall be made out of min 1.15mm thick press steel RMT 220.00
sheet.
17.7.6 Panel End Caps:

U or L shape caps suitable for thickness of panel used, with RMT 110.00
30mm flange. It should be made frem 0.5mm Pre coated PPGL
sheet.
17.7.7 Self Drilling Screws:

5” Each 13.00
3.5” Each 10.00
1” Each 6.00
17.7.8 Adhesives KG. 198.00
BSR_17 [202]
Chapter
Code No
1 2 3 4
17.8 Supply and fixing of Cement Bonded Particle Board (as per IS Sqm 653.00
14276) false ceiling using 6MM thick Cement Board with
galvanized and pre painted steel T section of size 24mm x
27mm x 0.4mm for main T duty pre punched to accept
cross T section of size 24mm x 25mm x 0.4mm duly
punched at both ends for insertion into main T. The grid size
will be 610mm x 610mm. The frame work (grid) is suspended
to the roof by using G.I flat of 0.60mm or 14-gauge G.I
wire with necessary fixers to the roof and frame work.
Cement Board panel is laded on the grid. The cost inclusive of
necessary hardware, labor, one coat of primer (Both side) and
two coats of smooth finish on visible side.
17.9 Supply and fixing of Cement Bonded Particle Board (as per Sqm 1679.00
14276) wall paneling using 10 MM thick Cement Board with
frame work made of GI stud section of size 48mm x 35mm x
0.55mm thick placed at every 610 mm C/C intervals vertically
and at 1200mm internals horizontally fixed to the wall by
means of self expansion screws and caps. Cement Board panel
is to be fixed to frame by means of self taping screws placed at
every 300 mm intervals leaving 3mm gap between two panels.
The cost inclusive of one coat of Altek primer and two coats
of Altek smooth finish and cost & conveyance of all materials,
labor charges etc. complete as per the direction of Engineer in
charge.
17.10 Supply and fixing of Cement Bonded Particle Board (as per Sqm 2429.00
14276) double skin partition using with 10 MM thick Cement
Board made out of G.I. track section of size 50mmx 35mm x
0.55 mm for fixing to the roof and floor and stud section of
size 48mm x 35mm x 0.55mm placed in track section
vertically at 610mm intervals and at 1200mm intervals
horizontally fixed to the wall by means of self expansion
screws and caps to the wall and roof. Cement Board panel is to
be fixed both sides of frame work by using self taping
screws fixed at every 300mm intervals to the frame work
leaving 3 mm gap between two panels. The cost inclusive with
one coat of Alltek primer and two coats of Alltek smooth
finish and cost and conveyance of all materials to site, labor
charges etc., complete as per the direction of Engineer in
charge.
BSR_17 [203]
Chapter
Code No
1 2 3 4
17.11 Supply and fixing of Factory Laminated Cement Bonded Sqm 3401.00
Particle Board double skin partition using with 10MM Factory
Laminated Cement Bonded Board made out of G.I track
section of size 50 mm x 35mm x 0.55mm for fixing to the roof
and floor and stud section of size 48mm x 35mm x 0.55mm
placed in track section vertically at 610mm intervals and at
1200mm internals horizontally. The frame is fixed by means
of self expansion screws and caps to the wall / roof. Laminated
Cement Bonded Particle Board is to be fixed both sides of the
frame work by using 2mm thick electro plated CR flat section
leaving 3mm gap between two panels. The cost inclusive of
cost and conveyance of all materials to sites, other materials
incidentals and labor charges as per the direction of Engineer
in charges.
17.12 Supply and fixing of Bath room / Toilet door shutter with 16mm Sqm 2407.00
Factory Laminated Cement Bonded Particle Board BISON Lam (IS
14276) door shutter with all-round „U‟ lipping of PPS section of size
12mm X 18mmX 12mmX0.6mm thickness with a hardware of 12mm
dia X200mm long aluminum aldrop – 2 nos2 No of 125mm long
handles and also 3 no Of IS304 grade Patee Hinges
3mmX12mmX180mm long with pole receiver of 10mm dia pole
X40mm long welded on 2mm X40mm(ss304) plates works as
receiver for RT patte hinges. The price inclusive of all material at
site.
17.13 Solid Rectangular Block (400x200x200, 400x200x100,

400x200x150,
225x200x100)
Providing and fixing up to floor five level of cement concrete Cum 10307.00
solid blocks (M-20 Grade) of different sizes (Manufactured
with fully mechanised dry cast process with forced action
mixer whose arms revolve along the main axis and rotate
about its own axis also, having humidity sensor for moisture
control of w/c ratio in concrete mix. Manufactured with steel
moulds (Milled and manufactured in CSI diamond or CSI
Nitro process for accuracy) on steel base plate of min 16 mm
thick; Having Vibration and pressing action both together
with the help of multiple synchronised vibrators. Power of
hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) including hoisting and
setting in position with cement mortar 1:3 (1 Cement : 3
Coarse Sand), cost of required centering, shuttering complete.
BSR_17 [204]
Chapter
Code No
1 2 3 4
17.14 Hollow Rectangular Block (400x200x200, 400x200x100)
Hollow Rectangular blocks of different sizes (Manufactured
with fully mechanised dry cast process with forced action
mixer whose arms revolve along the main axis and rotate
about its own axis also, having humidity sensor for moisture
control of w/c ratio in concrete mix. Manufactured with steel
moulds (Milled and manufactured in CSI diamond or CSI
Nitro process for accuracy) on steel base plate of min 16 mm
thick; Having Vibration and pressing action both together
with the help of multiple synchronised vibrators. Power of
hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) including hoisting and
setting in position with cement mortar 1:3 (1 Cement : 3
Coarse Sand), cost of required centering, shuttering complete.
17.15 Insulated Rectangular Block (400x200x200 mm)

insulated blocks of different sizes having a layer of
polysterene as insulating material (Manufactured with fully
mechanised dry cast process with forced action mixer whose
arms revolve along the main axis and rotate about its own axis
also, having humidity sensor for moisture control of w/c ratio
in concrete mix. Manufactured with steel moulds (Milled and
manufactured in CSI diamond or CSI Nitro process for
accuracy) on steel base plate of min 16 mm thick; Having
Vibration and pressing action both together with the help of
multiple synchronised vibrators. Power of hydraulic station
should be minimum 50KW for compaction and cured in
controlled chambers having humidity control and automated
air circulation system) including hoisting and setting in
position with cement mortar 1:3 (1 Cement : 3 Coarse Sand)
including cost of required centering, shuttering complete.
BSR_17 [205]
Chapter
Code No
1 2 3 4
17.16 Interlocking Paver Blocks having 80 mm thickness in M-40
grade concrete
Providing and Laying 80 mm thick cement concrete blocks of Sqm. 1210.00
M-40 Grade (Manufactured with fully mechanised dry cast
process with forced action mixer whose arms revolve along
the main axis and rotate about its own axis also, having
humidity sensor for moisture control of w/c ratio in concrete
mix. Manufactured with steel moulds(Milled and
Vibration and pressing action both together with the help
ofmultiple synchronised vibrators. Power of hydraulic station
air circulation system) spreading 25mm thick sand underneath
and filling joints with sand on existing W.B.M.base, as per
IS15658:2006 and all materials shall conform to MoRTH
Specification Clause 602.
17.17 Interlocking Paver Blocks having 100 mm thickness in M-

50 grade concrete
M-50 Grade(Manufactured with fully mechanised dry cast
mix. Manufactured with steel moulds (Milled and
BSR_17 [206]
Chapter
Code No
1 2 3 4
50 grade concrete
Providing and Laying 120 mm thick cement concrete blocks of Sqm 1566.00
M-50 Grade(Manufactured with fully mechanised dry cast
accuracy)on steel base plate of min 16 mm thick; Having

55 grade concrete
Providing and Laying 100 mm thick cement concrete blocks of Sqm 1528.00
accuracy)on steel base plate of min 16 mm thick; Having
BSR_17 [207]
Chapter
Code No
1 2 3 4
55 grade concrete
17.21 Kerb Stones of 1200x300x150, 1000x450x150,

1000x600x150, 600x300x150 size (M-30)
Providing and Laying cement concrete Kerb Stones of Cum 9429.00
different sizes in M-30 grade (Manufactured with fully
air circulation system) in position to the required line, level
and curvature jointed with cement mortar 1:3 (1 Cement : 3
Coarse sand) including making of joints, drainage opening
wherever required.
BSR_17 [208]
Chapter
Code No
1 2 3 4
17.22 Kerb Stones of 1200x300x150, 1000x400x150,
1000x600x150, 600x300x150 size (M-40)
Providing and Laying cement concrete Kerb Stones of Cum 9974.00
different sizes in M-40 grade (Manufactured with fully
air circulation system) in position to the required line, level
and curvature jointed with cement mortar 1:3 (1 Cement : 3
Coarse sand) including making of joints, drainage opening
wherever required.
17.23 Cellular Concrete Block for Pitching and garden paths

(600x400x80) in M-30
Providing and fixing Cellular concrete blocks (M-30 Grade), Sqm. 813.00
600x400x80 mm sizes (Manufactured with fully mechanised
dry cast process with forced action mixer whose arms revolve
along the main axis and rotate about its own axis also, having
position with cement mortar 1:3 (1 Cement : 3 Coarse Sand),
cost of required centering, shuttering complete.
BSR_17 [209]
Chapter
Code No
1 2 3 4
17.24 Pre Cast Concrete Flooring (Slab 600x600x100,
1000x650x100)
Providing and fixing Precast concrete flooring slabs (M-30 Sqm. 983.00
Grade) of different sizes(Manufactured with fully mechanised
dry cast process with forced action mixer whose arms revolve
along the main axis and rotate about its own axis also, having
cost of required centering, shuttering complete and spreading
25mm thick sand underneath.
17.25 Pre Cast U/Semi circular Drains (Outer size 600x400 mm,
wall thickness 80 mm)
Providing and fixing Precast concreteUdrains (M-30 Grade) of R.M. 459.00
different sizes (Manufactured with fully mechanised dry cast
mix. Manufactured with Steel moulds (Milled and
cost of required centering, shuttering complete and spreading
25mm thick sand underneath.
BSR_17 [210]
Chapter
Code No
1 2 3 4
17.26 Dry Cleaning of sofa sets using shampooing machine with all
materials & drying it do the level using machinery at
designated place by engineer-in-charge one seat of sofa
(payment for multi seater sofa will be done as the number of
seats of that sofa.)
17.26.1 Single Seater Sofa Each 154.00
17.26.2 Two Seater Sofa Each 232.00
17.26.3 Three Seater Sofa Each 332.00
17.27 Dry Cleaning of Woolen Carpet of any size using shampooing Sqm 102.00
machine with all material & drying it using machinery at the
designated place as told by engineer in charge.
17.28 Complete replacement of Tapestry cloth of Sofa set costing @

Rs. 300/- per Mtr. Approx of superior quality including
stitching charges (As approved by the Engineer in Charge) as
per existing pattern/design.
17.28.1 Single seater sofa Each 1449.00
17.28.2 Three seater sofa Each 3941.00
17.29 Complete replacement of damaged foam of Sofa set and using

100mm thick Joint less P.U. foam in seat of 32 density feather
foam of superior quality of approved make (as approved by
the Engineer-in-charge) pasted with Adhesive (Rubber
Solution) of superior quality.

50mm thick joint less P.U. foam of 32 density feather foam
superior quality of approved make (as approved by the
Engineer-in-charge) in back duly pasted with Adhesive
(Rubber Solution) of superior quality.

25mm thick joint less P.U. foam of 32 density feather foam
superior quality of approved make (as approved by the
Engineer-in-charge) in Hand rest, in seat and back and design
work as required of superior quality.
BSR_17 [211]
Chapter
Code No
1 2 3 4
17.32 Repair of wooden frame of Sofa set using Tat, Nail, Screw,
Bolt (if required) and re-assembling sofa set (Cost Including
all Consumble Item) complete in all respect as per direction of
the Engineer-in-charge
17.33 Repair using replacement of Jata, Dori, wooden batten & legs
everything in all respect as per approval of Engineer-in-charge.

17.34 Providing and Fixing machine made Synthetic Carpet having Each 484.00
total Carpet weight 850 gm Psqm. and 5mm thickness superior
quality complete in all respect as per direction of Engineer-in-
charge.
17.35 Providing and Fixing Chiken wire mesh at the joint of Sqm 77.00
masonry members/ R.C.C. Members with Nails complete in
all respect.
17.36 Providing and fixing in position wall panelling at all heights Sqm 2609.00
with intergral densified calcium silicate panels/tiles of size
595x595mm, having NRC (Noise Reduction coefficient) of
0.50 minimum) as per IS 8225:1987, Light reflectance of 85%
(minimum). Non combustible as per BS:476 (part-4), fire
performance as per BS:476 (part 6& 7), Humidity resistance of
100 %, thermal conductivity <0.043 W/m K as per ASTM
518:1991, comprising of a frame made from especially
fabricated galvanised mild steel sheet 0.50 mm thick pressed
section (galvanizing @120 grams per sqm including both
sides)
i.e. vertical studs of size 48x34x36 mm are placed at 600mm
center to center in a floor and ceiling channel section of size
50x32m fixed to the floor and soffit at 600mm centers using
12mm dia, 50mm long wedge type expanded zinc alloy dash
fastner with 10mm bolt.
BSR_17 [212]
Chapter
Code No
1 2 3 4
The joints between the panels are to be duly jointed and
finished using recommended jointing calcium sillcated based
compound and fiber joint tape roll 50mm wide (90 metre) roll
and two coats of primer suitable for panelling as per
manufacturer's specification as per direcrtion of Enginner-in-
Charge all complete.
17.37 Providing and Fixing powder coated aluminium angle corners Rmt 1474.00
of size 75 x 75 x 6mm over extruded/exposed corners of
walls/colom etc. fixed with glazing tape on all four sides
including filling of all inside edges of 6mm thickness with
weather silicone sealant by backer rod of approved quality to
make it completely air tight and water tight over the surface as
per dirction of Engineer-in-charge.
17.38 Supply & fixing of one side polished black granite/white Each 15110.00
marble stone 14-20mm thick of size 3'x2' with engraved and
gold colour painted letters (upto 500 letters) & borders
including soorsagar white stone pillars of size 0.15x0.15x2.1
Mtr. With moulding, carving & making slot on pillars for
fixing of granite stone including loading & unloading with all
leads & lifts as per direction of Engineer Inchagre.
17.39 Supply & fixing of one side polished black granite/white Each 11110.00
marble stone 14-20mm thick of size 3'x2' with engraved and
gold colour painted letters (upto 500 letters) & borders
including dismatalling plaster for fixing stone and finishing
the surface including cost of stone and other material, carriage,
loading, unloading with all leads & lifts as per direction of
Engineer Inchagre.
17.40 Providing and fixing Glass Brick with adhesive in line and Sqm 4900.00
length complete as per drawing and design and asapproved by
Engineer-in-Charge.
17.41 Repairing of High Back, Low Back and Medium Back

Revolving Padded Chair including required all material
complete in all respect as per directin of the Engineer-in-
Charge.
17.41.1 Replacing/Adding 25mm thick P.U. Sleep Well Foam of 32
Density in seat & back as per existing pattern (pasted with
Rubber Solution)
BSR_17 [213]
Chapter
Code No
1 2 3 4
(i) Low Back Chair Each 94.00
(ii) Medium Back Chair Each 119.00
(iii) High Back Chair Each 135.00
17.41.2 Replacement/pasting of leatherite seat as per approved sample

costing @ Rs. 300/- per Mtr. (Appx) as approved by the
Engineer in Charge.
(i) Low Back Chair Each 640.00
(ii) Medium Back Chair Each 901.00
(iii) High Back Chair Each 1247.00
17.41.3 Repair of Chair of NYLON wheel including all material of Each 72.00
fixing and labour Charge.
17.41.4 Replacing Bolt/Screw (of existing pattern) in the chair. Each 15.00
17.41.5 Repair/Change of Gas lift mechanism use for adjustion Each 495.00
purpose with fitting material and labour charges.
17.41.6 Repair/Change of Chrome base plate including all materal of Each 792.00
fixing and labour charge.
17.41.7 Repair/ Change of PU handle including all material of fixing Each 495.00
and labour charge .
17.42 Repair and polish work of peacock chair/padded chair

including required all material complete in all respect as per
direction of the Engineer in Charge.
17.42.1 Replacing/Adding 25mm thick P.U. sleep well foam of 32 Each 149.00
Density in seat & back as per existing pattern (Pasted with
Rubber solution)
17.42.2 Replacement of Baniyan foam/tapestry cloth in seat as per Each 206.00

approved sample costing @ Rs. 200/- per Mtr. (Appx.) as
approved by the Engineer in Charge.
17.42.3 Replacing linning cloth in bottom of the chair with Each 34.00
nail/screw/fevicol etc. of existing type & pattern.
17.42.4 Replacing bolt/screw (of existing pattern) in the chair. Each 15.00
BSR_17 [214]
Chapter
Code No
1 2 3 4
17.42.5 Repair of wooden frame of chair including required raw material i.e. Each 349.00
replacement of teak wood arms, legs, wooden required including
tighting work as per existing pattern complete in all respect.
17.42.6 Spirit polish on wooden chair with rubbing old surface Each 108.00
cleaning and good finishing inlucding cost of polish material.
17.43 Supplying, Filling and stitching of empty cement bags either of Per Bag 7.00
plastic or jute with earth avaiable at site of wieght not less than 40 kg
including stacking and removing.
17.44 Supplying and Spreading 25 to 30mm thick layer of Screened Per Cum 2150.00
approved Samod Bajari of Uniform colour from approved quarry
with all lead.
17.45 Labour Charge for providing and fixing 20' long 2" dia G.I. pipe with Each 260.00
flags (Flags to be provided by department) in straight line etc. as per
direction and removing all the flags complete before sunset as per
direction of Engineer in charge.
17.46 P/F wall mounted foldable hinged (Grab rail) size 750mm x 100mm Nos 7000.00
(LxW) as approved design, made of 35mm stainless steel pipe having
anti-bacterial Nylon surface with contour finish for better grip. Grab
bar should be mounted on wall between height 200mm to 250mm
from the top of W.C seat and extending 100mm to 150mm beyond
the front of the W.C. Complete in all respect as per Harmonized
guideline & Satisfaction of Engineer-in-Charge. Cera make
(B2210108)
17.47 P/f wall mounted inverted L Shaped grab bar with 700mm Nos 2300.00
long bar as approved design, made of 35mm stainless steel
pipe having anti-bacterial Nylon surface with contour finish
for better grip. Grab bar should be mounted on wall at height
of 700mm from the finish floor level complete in all respect as
per Harmonized guidline & Satisfaction of Engineer-in-
Charge. Cera make (B2210103)
17.48 P/F wall mounted 600mm long grab bar as approved design, made of Nos 1678.00
35mm stainless stell pipe having anti-bacterial Nylon surface with
contour finish for better grip. Grab bar should be mounted on wall at
height of 800mm from the finish floor level complete in all respect as
per Harmonized guidline & Satification of Engineer-in Charges.
Make Cera (B2210106)
BSR_17 [215]
Chapter
Code No
1 2 3 4
17.49 Supply and fixing of solid stainless steel grade 304 C type Nos 2860.00
door handle of dia 32mm length 600 (outside measurement)
having hole dia 14 mm of with i/c key arrangement.
17.50 Repair to damaged plaster with high performance curing free, quick Sqm 957.00
setting cement mortar & confirming to ASTM C 1600 in ratio of 1:4
with following properties of cement : Compressive strength of 20
MPa within 4 Hours, Curing free, bond strength of 4 MPa
within 24 Hours, Non shrink & Non toxic in following steps-
(i) Chopping loose and cracked plaster to required depth, cleaning
the exposed surface with wire brush, cleaning of plaster
surface with water as necessary and getting dried.
(ii) Plastering the surface with above mentioned high performance
cement sand mortar 1:4 upto depth of 25 mm complete with all
scaffolding.
(iii) No curing has to be done as the high performance cement used
should be curing free.
(This item is to be used in only emergency situation after
decided by Engineer in charge )
17.51 Providing and laying treatment of wear & tear concrete surface with Sqm 3184.00
pre-mixed, ready to use, geopolymer based mortar & confirming to
ASTM C 1600 upto 10 mm thickness with following property –

(i) Curing Free, compressive strength of 15 MPa within 2 hours, Quick
Setting, bond strength of 4 MPa within 24 hours and repaired surface
should be ready to use within 3 hours.
Note (This item is to be used in only emergency situation after
17.52 Providing and applying treatment of plaster and masonry Rmt. 195.00
cracks with pre-mixed, ready to use, geo polymer based mortar
& confirming to ASTM C 1600 upto 15 mm width and 15
mm depth by making V-Groove with following property –
(i) Curing Free, compressive strength of 15 MPa within 2 hours,
Quick Setting and with bond strength of 4 MPa within 24
hours with all scaffolding.
Note (This item is to be used in only emergency situation after
BSR_17 [216]
CHAPTER : S-1
SANITARY INSTALLATION WORK
NOTE: All items which are manufactured ISI marked, shall only be
used. this condition shall be always incorporated in special
condition of contract.
Chapter
Code No
1 2 3 4
WATER CLOSETS
1.1 P. & F Squatting Pan (Indian type) white glazed vitreous china
1st quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous
china P or S trap including cutting and making good the wall
and floor (excluding the pair of foot rest.)
1.1.1 Size 450mm. Each 980.00
1.1.2 Size 510 mm Each 1069.00
1.1.3 Size 580mm Each 1113.00
1.2 st
P & F Indian type white glazed vitreous china 1 quality W.C.
orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S
trap including cutting and making good the wall and floor:
1.2.1 Size 530x410mm. Each 2640.00
1.2.2 Size 580x440mm. Each 3080.00
1.3 P & F European type white glazed vitreous china 1st quality Each 2420.00
W.C pan (IS : 2556 Mark) with P or S trap including cutting
and making good the wall and floor
1.4 P & F European type white glazed vitreous china 1st quality Each 5198.00
Double syphonic W.C (IS :2556 Mark) with P or S trap
including cutting and making good the wall and floor
1.5 P & F Universal (anglo-Indian type) white glazed vitreous Each 4068.00
st
china W.C. pan 1 quality (IS 2556 Marked ) with P or S trap
including cutting and making good the wall and floor.
1.6 P & F European type white glazed vitreous china 1st quality
W.C. (IS : 2556 Mark) including cutting and making good the
wall and floor
1.6.1 Wall Mounting Each 3457.00
1.6.2 Wall Mounting (extended) Each 3879.00
1.6.3 Wall Mounting (syphonic) Each 4441.00
BSR_S1 [217]
Chapter
Code No
1 2 3 4
Note :-
(A) Add extra over item No. 1.1 to 1.7, 1.14, 1.15, 1.19, 1.22 Each 50%
,1.23,1.38 & 1.42 for using approved light coloured vitreous
china ware i.e.ivory champagne , perl , soft green , soft blue
,pink, ,light grey etc. instead of white vitreous chinawares.
(B) Add extra over item No.1.1 to 1.7, 1.14, 1.15, 1.19, 1.22 Each 65%
,1.23,1.38 & 1.42 for using approved dark colored vitreous
china ware i.e.Cherry Red , Dark blue, Jet black, Magenta,
Burgandy instead of white vitreous chinawares.
1.7 P & F water closet Seat Covers with brass hinges complete :
1.7.1 Solid PVC (IS 2548 marked) grade-I Black for EWC. Each 402.00
1.7.2 -do- White. Each 485.00
1.7.3 -do- Coloured. Each 501.00
1.7.4 -do- White. Each 352.00
1.7.5 -do- Coloured. Each 402.00
1.8 P & F C.P. lugs for toilet seat cover. Pair 79.00
1.9 Labour charges for removing W.C. pan (any type) of all sizes Each 286.00
with care including all necessary fittings P or S trap.
1.10 P & F White glazed Conversion Bend for W.C. from P trap to Each 146.00
S trap. .
1.11 P & F vitreous china P trap of approved quality Each 215.00
1.12 Add extra if C.I.P trap is used in place of Vitreous china P trap Each 544.00
for W.C.
1.13 P & F White Vitreous China Double Syphonic European Each 12114.00
W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of
(IS : 2556 Mark) of 10 litre capacity complete with all
necessary internal fittings including cutting and making good
the wall and floor.
URINALS:
1.14 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia
G.I. waste pipe, dome waste couplings, concealed iron
brackets or screws etc complete.
1.14.1 Flat Back (small) size 456x355x265mm. Each 1832.00
1.14.2 Flat Back (large) or half stall size 610x400x80mm. Each 4637.00
1.14.3 Mini stall size 455x385x350mm. Each 2287.00
BSR_S1 [218]
Chapter
Code No
1 2 3 4
1.15 P & F W.V.C. Urinal Partition Plate of approved standard Each 994.00
make of size 630x315mm including making good the wall.
1.16 P&F Marble Urinal Partition slab both sides polished of

approved design cut from marble size 900x600mm.
1.16.1 Makrana II quality marble having light spots Each 923.00
1.16.2 Makrana Àlbeta` Marble having light streaks. Each 862.00
1.16.3 Makrana Àdanga` or Raj Nagar 1St Quality White or Andhi Each 801.00
Indo-Italian marble.
1.17 P & F W.V.C. Half-Round Channel of approved make

in C.M. 1:3, joints finished in white cement of:
1.17.1 Size 100mm dia. Mtr. 585.00
1.17.2 Size 150mm dia. Mtr. 757.00
1.18 P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard
make complete. Including cutting & making good the floor:

1.18.1 Size 450x350mm Each 853.00
1.19 Labour charges for removing and refixing of urinals (all Each 339.00
type & sizes) including all necessary fittings.
1.20 P & F Low level Flushing Cistern of 10 litres capacity (IS :

2556 mark) of approved make with complete fittings C.I.
brackets duly painted, brass ball cock with ball (IS: 1703
mark) complete including cutting and making good the wall:
1.20.1 WVC with C.P. brass bend. Each 2483.00
1.20.2 PVC with PVC bend as per IS : 7231 . Each 1291.00
1.20.3 PVC with PVC bend and superior internal fittings as per IS : Each 1645.00
7231 .
1.20.4 WVC for symphonic EWC. Each 2599.00
1.20.5 PVC with CP brass long band as per IS : 7231 . Each 1491.00
1.21 P & F Automatic Flushing Cistern of first quality (IS : 774

mark) of approved make fitting, siphon with copper tube, C.I.
brackets complete including cutting and making good the wall.
WVC (as per IS : 2556) 10 litres. Each 1087.00
Note :- Deduct if plastic syphon is used. Each 90.00
BSR_S1 [219]
Chapter
Code No
1 2 3 4
1.22 P & F Flush Pipe of approved make with complete fittings for
high level flushing cistern:
1.22.1 G.I. `B` class (Concealed) 25mm. Each 439.00
1.22.2 G.I. `B` class (Concealed) 32 mm. Each 513.00
1.22.3 PVC exposed (heavy) 32mm. Each 168.00
1.22.4 GI (Sheet) hot galvanized exposed (10 litres). Each 254.00
1.23 P & F WVC (10 litres) low-level flushing cistern with cover. Each 828.00
1.24 P & F WVC (10 litres) low-level flushing cistern cover only Each 306.00
1.25 P & F WVC syphon with plunger plate only. Each 244.00
1.26 P & F WVC Auto cistern with cover only. Each 462.00
1.27 P & F WVC Auto cistern cover only. Each 145.00
1.28 P & F C.P. brass Urinal Flush Pipe set complete with
flanged brackets of approved make.
1.28.1 For 4 Urinals Each 1331.00
1.28.4 For 1 Urinal Each 504.00
1.29.1 P & F C.P. brass Urinal Spreader for stall urinal of approved Each 363.00
make.
1.29.2 P & F Synthetic (PTMT) Urinal Spreader for stall urinal of Each 246.00
approved make.
1.30.1 P & F C.P. brass Doom Waste Coupling 32 mm dia. Each 152.00
1.30.2 P & F C.P. brass Doom Waste Coupling 40 mm dia. Each 206.00
1.31 P & F Plastic Syphon of approved make for automatic flush Each 157.00
tank.
1.32 P & F Copper tube Syphon for auto flush tank. Each 375.00
1.33 Removing and re-fixing of wash hand basin including all Each 239.00
necessary fittings.
1.34 P & F metal brackets duly painted including cutting & making Pair 165.00
good the wall.
BSR_S1 [220]
Chapter
Code No
1 2 3 4
1.35 P & F C.P. Brass flush Valve with C.P. flush bend of
approved make.
1.35.1 Lever type with Elbow 32 mm dia Each 3072.00
1.35.2 Push type with Elbow 32 mm dia Each 3209.00
1.35.3 Concealed type for 115 mm thick wall Each 3674.00
1.35.4 Concealed type for 230 mm thick wall Each 3793.00
1.35.5 Economy model 25 mm dia. Each 2196.00
1.35.6 Economy model 32 mm dia. Each 2404.00
WASH BASINS:
1.36 P & F WVC Wash basin (Ist quality IS:2556 Mark) of
approved make with C.I. brackets duly painted 1 No. 15 mm
C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste
coupling of approved make, P.V.C Waste pipe with PVC nut
32 mm complete including cutting & making good the wall :
1.36.1 Size 450 mm x 300 mm Each 2268.00
1.36.2 Size 510 mm x 400 mm Each 2408.00
1.36.3 Size 550 mm x 400 mm Each 2598.00
1.36.4 Size 580 mm x 450 mm Each 2745.00
1.36.5 Size 610 mm x 510 mm Each 3477.00
1.36.6 Size 400 mm x 400 mm or 450 mm x 390 mm Corner Each 2232.00
1.36.7 460 dia for counter top Each 2957.00
1.36.8 Size 550 mm x 400 mm dia for counter top Each 2994.00
1.36.9 Size 630 mm x 500 mm dia for counter top Each 3265.00
1.36.10 Add extra for using 25mm GI waste pipe instead of PVC waste Each 90.00
pipe
1.37 P & F Terrazzo (Mosaic) wash hand basin with supporting

brackets waste coupling and PVC waste pipe complete,
including painting of brackets making good the walls:
1.37.1 450 mm x 280 mm Each 1058.00
1.37.2 550 mm x 400 mm Each 1142.00
KITCHEN & LAB. SINKS:

1.38 P & F Kitchen & Lab. Sink of approved make with C.I.
brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass
chain with rubber plug, 40 mm G.I. waste pipe up-to floor
level complete including cutting and making good the wall &
floor :
1.38.1 Fire clay glazed kitchen sink (I.S 771-1985 Marked) size 600 Each 3890.00
x 450 x 250mm.
1.38.2 Fire clay glazed kitchen sink (I.S 771-1985 Marked) size 600 Each 3743.00
x 450 x 200 mm.
BSR_S1 [221]
Chapter
Code No
1 2 3 4
1.38.3 WVC Lab sink (IS:2556 mark) size 530 x 430 x 180 mm Each 2754.00
1.38.6 Mosaic fine polished kitchen sink size 600 x 450 x 200mm. Each 1619.00
1.38.7 Mosaic fine polished kitchen sink size 450 x 450 x 200mm. Each 1430.00
1.38.8 Mosaic fine polished kitchen sink size 600 x 450 x 200 mm Each 1839.00
with 600 x 450mm drain board
1.38.9 1.0 mm thick stainless steel AISI -304 & IS 13983-1994
kitchen sink of approved make as per Engineer-in-charge with
large waste coupling.
Overall size Bowl size

(inches) (inches)
1.38.9.1 18 x 16 x 6 16x14x6 Each 3817.00
1.38.9.2 22 x 18 x 7 20x16x7 Each 4330.00
1.38.9.3 24 x 18 x 8 20x16x8 Each 5062.00
1.38.9.4 37 x 18 x 7 17x15x7 (with drain board) Each 5576.00
1.38.9.5 45 x 20 x 8 20x16x8 (with drain board) Each 8725.00
Note :- Deduct for item No 1.40.9 for using any other make than Each 35%
specified above.
1.39 P & F Drain Board of approved make with C.I. brackets duly
painted complete including cutting & making good the wall:

1.39.1 WVC (I.S.: 2556 Mark) size 530 x 450mm Each 1200.00
1.39.2 Mosaic fine polished size 600 x 450 Each 407.00
1.40 P & F 1st quality WVC pedestal for wash basin. Each 1444.00
MISCELLANEOUS
1.41 P & F Bottle Trap of approved make :
1.41.1 C.P Brass 32 mm Each 584.00
1.41.2 C.P Brass 40 mm Each 633.00
1.41.3 Synthetic Material (PTMT)32 mm Each 512.00
1.41.4 Synthetic Material (PTMT)42 mm Each 572.00
1.41.5 P.V.C Each 130.00
1.42 P& F waste Coulping with fittings of approved quality /make:

1.42.1 C.P Brass 32 mm dia Each 143.00
1.42.2 C.P Brass 40 mm dia Each 218.00
1.42.3 C.P. Brass 50 mm dia Each 262.00
1.42.4 SS 125 mm Each 305.00
BSR_S1 [222]
Chapter
Code No
1 2 3 4
1.43 P& F waste Pipe with all fitting
1.43.1 P.V.C with C.P nut 32 mm Each 145.00
1.43.2 P.V.C with PVC nut 32 mm Each 61.00
1.43.3 P.V.C. with C.P. nut 40 mm dia Each 157.00
1.43.4 G.I(B class) 32mm Each 224.00
1.43.5 G.I(B class) 40 mm Each 297.00
1.44 P & F Bevelled edge Mirror/mirror with teak wood lipping

around of special glass of approved make as per direction of
Engineer-in-charge complete with 6mm thick commercial ply
base fixed to wooden screws & washers.
1.44.1 Size 600 x 450mm x 4 mm thick Each 575.00
1.44.2 Other sizes Sqm. 1538.00
Note :- For other quality mirrors from approved make mirrors
deduct 30%
1.45 P & F Looking Mirrors with P.V.C. frame of approved make

as per direction of Engineer-in-charge
1.45.1 Size 500x400mm Each 351.00
1.45.2 Oval shape 450x350 mm Each 514.00
1.45.3 Round 500mm dia Each 549.00
Note :- For other quality mirrors from approved make mirrors
deduct 30%
1.46 P & F Toilet Shelf of approved quality/make:

1.46.1 W.V.C. (I.S.: 2556 Mark) Size 300mm Each 440.00
1.46.2 W.V.C. (I.S.: 2556 Mark) Size 550 mm Each 520.00
1.46.3 Synthetic Material with tumbler of approved quality/make size Each 431.00
470 x 114 x 36mm
1.46.4 Hard Plastic of approved make as per direction of EI of size Each 520.00
590x140mm
1.46.5 Acrylic shelf on C.P. brass casted brackets & guard rail of Each 997.00
approved make as per direction of EI of size 550x125mm
1.46.6 Glass Shelf with edges rounded off Anodised Aluminium Each 361.00
angle frame & C.P. brass brackets & guard rail size
600x120mm
1.47 P & F Towel Rail or Ring of approved quality/make:

1.47.1 C.P. brass Towel Rail elbow type with concealed screws size Each 468.00
450mm (Heavy duty).
1.47.2 C.P. brass Towel Rail elbow type with concealed screws size Each 516.00
600 mm (Heavy duty).
1.47.3 C.P. brass towel rail with brackets 450 x 20mm. Each 296.00
1.47.4 C.P. brass towel rail with brackets 600 x 20mm. Each 337.00
BSR_S1 [223]
Chapter
Code No
1 2 3 4
1.47.5 Synthetic Material(PTMT) of approved quality/make size 525 Each 152.00
x90 x 75mm
1.47.6 Synthetic Material(PTMT) of approved quality/make size 675 Each 165.00
x90 x 75mm
1.47.7 WVC (1stquality, IS2556 Marked) of approved make. Each 144.00
Recessed towel Hanger size 108 x 108mm.
1.47.8 C.P. Brass Towel Ring revolving type Each 254.00
1.47.9 Synthetic Material (PTMT) Towel Ring of approved Each 165.00
quality/make.
1.48 P & F Grating of approved quality/make:

1.48.1 Stainless Steel Sheet size 125mm dia. Each 62.00
1.48.2 Stainless Steel Sheet size 125mm dia. Heavy Quality of Each 97.00
approved make
1.48.3 Synthetic Material(PTMT) of approved quality/make size Each 89.00
125mm dia.
1.48.4 (-do-) 150mm dia. Each 97.00
1.48.5 (-do-) Square 150 x 150 x 8mm. (Anti Cockroach) Each 358.00
1.48.6 C.P. brass with frame (Heavy) & superior quality size 125mm Each 131.00
dia.
1.48.7 (-do-) Light & superior quality size 125mm dia Each 55.00
1.48.8 Cast Iron. Each 69.00
1.49 P & F Liquid Soap Container with brackets complete of

approved make:
1.49.1 C.P. brass Each 238.00
1.49.2 Synthetic Material of approved quality/make: Each 164.00
1.50 P & F Tooth Paste & Brush Holder of approved quality/make:
1.50.1 C.P. brass Each 127.00

1.50.2 C.P. brass (Heavy and Superior quality) Each 520.00
1.50.3 Stainless Steel Each 319.00
1.51 P & F Toilet Paper Holder with rod of approved

quality/make:
1.51.1 C.P. brass Each 223.00
1.51.2 C.P. brass heavy & Superior quality. Each 602.00
1.51.3 st Each 305.00
WVC (1 quality, IS 2556 Marked) recessed size 150x150mm.
1.51.4 (-do-) exposed (-do-) Each 238.00
BSR_S1 [224]
Chapter
Code No
1 2 3 4
1.52 P & F Soap Dish or Tray of approved quality/make
1.52.1 C.P. brass Each 127.00
1.52.2 C.P. brass heavy and superior quality. Each 156.00
1.52.3 WVC (1st Quality, IS 2556 Marked) recessed size 150 x 150 Each 283.00
mm.
1.52.4 (-do-) 200 x100mm. Each 327.00
1.52.5 (-do-) Soap tray 170mm. Each 245.00
1.52.6 (-do-) Soap Dish 380mm. Each 327.00
1.53 P & F Twin- peg of approved quality / make

1.53.1 C.P. brass Each 79.00
1.53.2 C.P. brass (heavy)Superior quality Each 149.00
1.53.3 Acrylic Each 76.00
1.54 P & F Shower arm 15mm dia of approved quality/make.

1.54.1 C.P.brass heavy & superior quality 150mm Each 198.00
Projection.
1.54.2 (-do-) size 220mm(-do-) Each 307.00
1.54.3 (-do-) size 300mm.(-do-) Each 337.00
1.54.4 (-do-) size 370mm.(-do-) Each 376.00
1.55 P & F Bath Shower of approved quality/make.

1.55.1 C.P. brass fixed. Each 149.00
1.55.2 C.P. brass of Heavy & superior quality 150mm. Each 376.00
1.55.3 C.P. brass of Heavy & superior quality, revolving with Each 573.00
adjustable key 150mm.
1.56 P & F Extension Pipe for bib cocks of approved quality/make.
1.56.1 C.P. brass of Heavy & Superior quality 50x15mm Each 85.00
1.56.2 (-do-) 100 X 15mm. Each 119.00
1.56.3 (-do-) 150 X 15mm. Each 168.00
1.57 P & F Acrylic Toilet accessories set consisting of Towel rail, Each 1179.00
shelf, towel ring, soap dish, paste & brush holder & twin peg
of approved quality/make.
1.58 Labour Charges for removing WVC pan:

1.58.1 Indian/Orissa pan Each 227.00
1.58.2 European W.C. Each 227.00
1.58.3 Flushing cistern Each 96.00
BSR_S1 [225]
Chapter
Code No
1 2 3 4
1.59 P & F Jet spray for water closet with C.P. Copper Tube flange Each 381.00
of approved make.
1.60 Providing & fixing C.P.flange for 15mm dia taps. Each 18.00
1.61 Providing and fixing 1st quality standard white, grey, ivory, Sqm. 674.00
glazed tiles confirming to code IS : 15622 of size 200mm x
300mm in walls, floors, steps, pillars etc. laid on a bed of neat
cement slurry finished with flush pointing in the white cement
mixed with pigment to match the shade of the tile complete
(excluding the cost of cement plaster on walls and pillar).
1.62 Providing and fixing 1st quality MAT finished ceremic tile Sqm. 748.00
size 300x300mm confirming to code IS : 15622 colour such
as white, grey, ivory, fume red brown, light green, light blue
and other light shades in floors, steps, pillars etc. laid on a bed
of neat cement slurry finished with flush pointing in the white
cement mixed with pigment to match the shade of the tile
complete (including the cost of cement mortar bed 1:4).
1.63 Extra for using Marble printed / Granite shade or dark Sqm 10%
shade tiles instead of white, grey, ivory, fume red brown,
light green, light blue and other light shades in glazed
tiles and MAT finished tiles.
1.64 Extra for using size above 200x300mm in glazed tiles and Sqm 10%
for using 400mm x 400mm MAT finished tiles in place of
300mm x 300mm size.
1.65 P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook of Each 605.00
approved make and heavy as per direction of Enginner-in-
Charge
1.66 P & F C.P. brass Urinal Spreader for Large Urinal of heavy Each 617.00
duty of approved make as per direction of Enginner-in-Charge
1.67 Removing & Re fixing of P.V.C. Cistern fittings (Syphon, Ball Each 468.00
cock & Handle Set) complete as per direction of Enginner-in-
Charge
BSR_S1 [226]
Chapter
Code No
1 2 3 4
1.68 Providing & Fixing Premium Quality white glazed vitreous
china Sanitary Wares (IS:2556 Mark) of approved make as per
direction of Engineer-in-charge including cutting and making
good the wall and floor.
1.68.1 W.C. orissa pan with 100 mm vitreous china P or S trap (Size Each 3065.00
580x440 mm.)
1.68.2 Universal (anglo-Indian type) with P or S trap Each 6386.00
1.68.3 Wall Mounting European type W.C. Each 9072.00
1.68.4 Double Syphonic European W.C. with mounted W.V.C. Each 17839.00
flushing cistern of 10 litre capacity complete with all
necessary internal fittings with Hydraulic seat cover.
1.69 Providing & Fixing premium qulaity WVC Urinal with PVC
waste pipe, dome couplings, concealed iron brackets or screws
etc. complete.
1.69.1 Flat Back (small) size 440x265x315 mm. Each 2619.00
1..69.2 Flat Back (large) or half stall size 590x375x390 mm. Each 6246.00
1.70 Providing & Fixing premium qulaity W.V.C. Urinal Partition Each 2636.00
plate of size 630x315 mm
1.71 Providing & Fixing premium qulaity WVC Wash basin with
C.I. brackets duly painted & 32 mm C.P. brass waste coupling
of approved make with PVC waste pipe complete
1.71.1 Size 550 mm x 400 mm Each 2334.00
1.71.2 Size 550 mm x 400 mm dia for counter top. Each 3372.00
1.72 P & F Premiumquality water closet Seat Covers with brass Each 714.00
hinges complete Solid PVC (ISI marked) grade-I White for
EWC.
1.73 P & F Premium quality Low level Flushing Cistern of 10 litres Each 1823.00
capacity (IS:2556 mark) of approved make as per Engineer-in-
charge with complete fittings C.I. brackets duly painted, brass
ball cock with ball, (IS:1703 mark) complete including cutting
and making good the wall :
1.74 P&F Looking Mirror 5mm thick of approved make with Sqm 2544.00
ornamental frame size 50x12 with 6mm Ply Board on Back
Side Complete as per approved sample
1.75 Supply of Hydraulic Seat Cover for Europeon WC of superior Each 4057.00
quality approved make in white Colour
BSR_S1 [227]
Chapter
Code No
1 2 3 4
1.76 Providing & Fixing chair for wall hung W.C. Each 1604.00
1.77 Providing & Fixing Concealed cistern with Floor mounting Each 8187.00
frame and flush plate of superior quality and approved sample
by Engineer-in-charge.
1.78 Providing and fixing new spindle for Bib cock/pillar cock for Each 114.00
repairing purpose to solve leakage and proper functioning of
tap.
1.79 Providing & Fixing premium quality Toilet corner Glass Shelf Each 1562.00
size 225x225mm with C.P. brass brackets & guard rail edges
rounded of SS frame
1.80 Providing & Fixing premium quality waste coupling 32mm Each 519.00
half thread as per approved by Engineer in Charge.
1.81 Providing & Fixing Premium quality Bottle trap internal Each 1599.00
portion 32mm, size 250mm long wall connection pipe & wall
flange as per approved by Engineer in Charge.
BSR_S1 [228]
CHAPTER : S-2
WATER SUPPLY INSTALLATION
Chapter
Code No
1 2 3 4
GALVANISED IRON PIPES

2.1 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding
union (IS:1239 Mark) & MS clamps including cutting and
making good the walls and floors:
(a) Exposed on wall
2.1.1 15 mm dia nominal bore
'A' Class Mtr. 202.00
'B' Class Mtr. 230.00
2.1.2 20mm dia nominal bore







BSR_S2 [229]
Chapter
Code No
1 2 3 4
(b) Concealed pipe in wall including painting with

anticorrosive bitumen paint
2.1.9 15 mm dia nominal bore

'A' Class Mtr 261.00
'B' Class Mtr 278.00

2.1.11.1 A' Class Mtr 342.00
2.1.11.2 B' Class Mtr 429.00
2.2 P & F G.I. Pipes (External Work) with G.I. fittings excluding union
(IS : 1239 Mark) including trenching & refilling earth etc.






BSR_S2 [230]
Chapter
Code No
1 2 3 4



2.3 Making connection of G.I. distribution branch with G.I. main

including all fitting.
2.3.1 Upto 25mm dia Each 265.00
2.3.2 Beyond 25mm & upto 100mm dia Each 389.00
2.4 Fixing water meter (IS: 779 mark) and stop cock in G.I. pipe Each 308.00
line including making chamber of approved size excluding
cost of water meter & stop cock.
2.5 P & F water meter (IS : 779 mark) of approved make.

2.5.1 15mm dia Each 949.00
2.5.2 20mm dia Each 1734.00
2.5.3 25 mm dia Each 2378.00
COCKS, MIXERS, DIVERTORS & VALVES

Note:
(a) The rates are for ISI marked item.
(b) If the items are Non- ISI marked, reduce the rate by 25%.
2.6 P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality
and approved make:
2.6.1 C.P. Pillar cock, 15 mm dia nominal bore Each 779.00
2.6.2 C.P. Pillar cock Elbow action, 15 mm Each 820.00
nominal bore.
2.6.3 C.P. Pillar cock fancy type ,15mm Each 914.00
nominal bore.
2.6.4 C.P. Pillar cock, Swan-neck with casted spout, 15mm nominal Each 1246.00
bore.
2.6.5 C.P. Pillar cock, high-neck, 15 mm nominal bore. Each 779.00
2.6.6 Synthetic Material (PTMT) Pillar cock of approved quality / Each 388.00
make 15mm nominal bore.
BSR_S2 [231]
Chapter
Code No
1 2 3 4
2.7 P & F Bib Cock (IS : 8931 Mark), Superior quality of

approved make:
2.7.1 Brass 400 gm,15mm nominal bore. Each 298.00
2.7.2 P.V.C.heavy duty, 15mm nominal bore. Each 106.00
2.7.3 C.P. Brass bib cock,15mm nominal bore. Each 590.00
2.7.4 (-do-) Long body, 15mm nominal bore weight not less than Each 783.00
690 gm
2.7.5 (-do-) Long nose, 15mm nominal bore weight not less than 810 Each 1008.00
gm
2.7.6 (-do-) Elbow-action, 15mm nominal bore. Each 953.00
2.7.7 Synthetic Material(PTMT) bib cock of approved quality/ Each 187.00
make, nominal bore, 15mm, 86 mm long.
2.7.8 (-do-) Fancy Type, 122 mm long. Each 232.00
2.7.9 (-do-) Long Body, 175 mm long Each 295.00
2.8 P & F Stop Cock (IS :8931 Mark), superior quality & of
approved make:
2.8.1 Brass 400 gm. 15mm nominal bore. Each 319.00
2.8.2 (-do-) 750 gm. 20 mm nominal bore. Each 460.00
2.8.3 (-do-) 1350gm. 25 mm nominal bore. Each 729.00
2.8.4 C.P. Brass 15mm nominal bore. Each 477.00
2.8.5 (-do-) Concealed Stop Cock 15mm. Each 1009.00
2.8.6 Synthetic material (PTMT) stop cock of approved Each 231.00
quality/make 15mm.
2.8.7 (-do-) Concealed stop cock 15mm Each 259.00
2.9 P & F Sink Cocks of superior quality & approved made :

2.9.1 C.P. Sink cock swinging spout 15mm. Each 977.00
2.9.2 (-do-) Casted Spout 15 mm. Each 977.00
2.10 P & F Push Cock superior quality, of approved make

2..10.1 C.P. Brass 15 mm. Each 370.00
2.10.2 Synthetic Material (PTMT) push cock of approved Each 205.00
quality/make 15mm.
2.11 P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball
complete :
2.11.1 Brass wt. Not less than 300 gm,15mm. Each 314.00
2.11.2 Brass wt.Not less than 400 gm, 20mm. Each 372.00
2.11.3 (-do-) wt.Not less than 600 gm, 25mm. Each 440.00
2.11.4 (-do-) wt.Not less than 800 gm, 32mm. Each 480.00
2.11.5 (-do-) wt.Not less than 1000 gm 40mm.: Each 728.00
2.11.6 (-do-) wt.Not less than 1200 gm 50mm. Each 789.00
BSR_S2 [232]
Chapter
Code No
1 2 3 4
2.11.7 Synthetic material (PTMT) of approved make 15mm nominal Each 277.00
size.
2.11.8 (-do-) 20 mm nominal size. Each 383.00
2.12 P & F Inlet Connection (Angle Valves) Superior quality, of

approved make, for Wash basin, Gyser etc.
2.12.1 C.P. Inlet connection 15mm.Brass (IS : 8931 marked) Each 501.00
2.12.2 ---do--- with 37 cm long pipe and nut. Each 590.00
2.12.3 ---do--- with 60 cm long thread and nut Each 626.00
2.12.4 Synthetic Material (PTMT) Inlet connection of approved Each 240.00
quality/make 15 mm nominal size.
2.13 P & F 15 mm. Dia Connection Pipe of approved quality/make

:
2.13.1 PVC pipe with C.P. Brass nuts upto length, 300mm Each 73.00
2.13.2 (-do-) upto length 370mm Each 79.00
2.13.3 (-do-) 450mm. Each 101.00
2.13.4 (-do-) 600mm. Each 116.00
2.13.5 CP Brass Pipe with CP Brass nuts upto length 300mm. Each 97.00
2.13.6 (-do-) 370mm. Each 123.00
2.13.7 (-do-) 450mm. Each 136.00
2.13.8 (-do-) 600mm. Each 176.00
2.14 P & F Flush Cock / Flush Valve (IS : 9758

Mark) for WC of approved quality make :
2.14.1 CP brass push type 15mm nominal bore. Each 358.00
2.14.2 (-do-) 20mm nominal bore. Each 541.00
2.14.3 (-do-)exposed 25mm nominal bore. Each 961.00
2.14.5 (-do-) concealed 25mm nominal bore. Each 975.00
2.14.6 (-do-) concealed 32mm nominal bore. Each 1422.00
2.14.7 (-do-) Half-turn exposed 25mm nominal bore. Each 783.00
2.14.8 (-do-) Concealed 25mm nominal bore. Each 902.00
2.14.9 Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / Each 551.00
make, 25mm nominal bore.
2.14.10 CP Brass flush valve 32mm nominal bore Each 1993.00
2.15 P & F Full-way Valve (IS:778 Mark) or wheel valve of

approved make :
2.15.1 Gun-metal 15mm nominal bore. Each 227.00
BSR_S2 [233]
Chapter
Code No
1 2 3 4

2.15.9 (-do-)100 mm dia nominal bore Each 4400
2.16 P & F Gun-metal Non-return Valve or Check Valve (IS : 778

Make) of approved make, superior quality:
2.16.1 15mm nominal bore.
(a) Horizontal Each 272.00
(b) Vertical Each 238.00





(b) Vertical Each 964
2.17 P & F Flush Valve (Hydraulic) with level complete (IS :

9758 Mark) of approved make :
2.17.1 32mm nominal bore. Each 2650.00
25mm nominal bore. Each
2.18 P & F Oxidised Gas Taps, Bench-type of superior quality and

approved make:
2.18.1 One way Each 230.00
2.18.2 Two way Each 309.00
2.18.3 Three way Each 389.00
2.18.4 Four way Each 457.00
BSR_S2 [234]
Chapter
Code No
1 2 3 4
2.19 P & F Chromium plated Swan-neck Laboratory Cock of

approved quality / make:
2.19.1 One way Each 384.00
2.19.2 Two way Each 525.00
2.19.3 Three way Each 631.00
2.19.4 Four way Each 691.00
2.20 P & F Spouts of superior quality and approved make:

2.20.1 C.P. brass spout Each 662.00
2.20.2 (-do-) Extra heavy with flange. Each 810.00
2.21 P & F Mixing Range (15mm)

2.21.1 C.P. One hole/close hole basin mixer with casted spout. Each 1740.00
2.21.2 (-do-) with swinging spout casted. Each 2001.00
2.21.3 C.P. sink mixer with swinging spout J-pipe. Each 1876.00
2.21.4 (-do-) With casted spout. Each 1936.00
2.21.5 C.P. valve mixer non-telephonic type. Each 1800.00
2.21.6 C.P. wall mixer telephonic type crutch & telephonic shower. Each 3179.00
2.21.7 (-do-) without crutch & telephonic shower. Each 2541.00
2.21.8 C.P. Bath-tub mixer without telephonic shower but with Each 3146.00
crutch.
2.21.9 C.P. Surgical basin mixer elbow action. Each 2541.00
2.21.10 (-do-) with shower (wall type) Each 4580.00
2.22 P & F Divertors of superior quality and approved

make:
2.22.1 C.P. brass Tip-tone divertor bath spout with mixing valve. Each 2556.00
2.22.2 (-do-) Three way (-do-) Each 2456.00
2.22.3 (-do-) Two way with 22Cm. Pipe flange Each 1410.00
2.23 P & F foot valve of superior quality and approved make

with fittings :
2.23.1 Brass 25 mm. Each 172.00
2.23.2 CI 50 mm Each 431.00
2.23.3 CI 65 mm Each 543.00
2.23.4 CI 80 mm Each 831.00
2.23.5 CI 100 mm Each 1650.00
2.24 P & F Precast R.C.C. Water Storage Tank with R.C.C. cover
25mm thick and 15 Cm. Long G.I. over-flow pipe including
making connections etc. & hoisting upto 1M. ht. From ground
level having:
2.24.1 340 litres water capacity size 90 x 75 x 60 Cm. Each 932.00
2.24.2 270 litres water capacity size 90 x 60 x 60 Cm. Each 756.00
BSR_S2 [235]
Chapter
Code No
1 2 3 4
2.25 Hoisting Charges of precast R.C.C. water storage tank on each

floor :
2.25.1 340 litres water capacity. Each 218.00
2.25.2 270 litres water capacity. Each 162.00
2.26 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating
the BIS license No), of approved make with cover, 25mm dia
1M long G.I. over-flow pipe & 25 Cm. long wash out pipe
with plug & socket, including making connection etc.,
complete of approved design:
2.26.1 200 litres capacity. Each 1569.00

2.26.2 300 (-do-) Each 2352.00
2.26.3 500 (-do-) Each 3920.00
2.26.4 750 (-do-) Each 5881.00
2.26.5 1000 (-do-) Each 7841.00
2.26.6 2000 (-do-) Each 15682.00
2.26.7 3000(-do-) Each 23522.00
2.26.8 5000(-do-) Each 39204.00
2.27 Hoisting Charges for each floor :

2.27.1 For items 2.26.1 to 2.26.4 Each 110.00
2.27.2 For items 2.26.5 to 2.26.8 Each 157.00
2.28 Providing and fixing Bitumen Paint Coating over G.I. Pipes
Complete as per Specifications. –
2.28.1 15 mm dia Rmt. 1.50
2.28.2 20 mm dia Rmt. 2.00
2.28.3 25 mm dia Rmt. 2.50
2.28.4 40 mm dia Rmt. 4.00
2.29 Providing and fixing Polyethylene - Aluminium -Polyethylene

(PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004
U.V. stablised with carbon black having thermal stabillity for
hot and cold water supply, capable to withstand temperature
upto 80ºC including all special fittings of composite material
(engineering plastic blend and brass inserts wherever required)
e.g. elbows, tees, reducers, couplers connectors etc.with
clamps at 1.00 metre spacing.This include the cost of cutting
chases and including testing of joints complete as per direction
of Engineer In charge
Internal work - Exposed on Wall
2.29.1 1216 (16mm OD) pipe Metre 235.00
2.29.2 1620 (20mm OD) pipe Metre 270.00
BSR_S2 [236]
Chapter
Code No
1 2 3 4
2.29.3 2025 (25mm OD) pipe Metre 328.00

2.29.4 2532 (32mm OD) pipe Metre 435.00
2.29.5 3240 (40mm OD) pipe Metre 559.00

clamps at 1.00 metre spacing.This include the cost of cutting
chases and including testing of joints complete as per direction
of Engineer In charge
Concealed installation including cutting chases and making
good the walls etc. complete.
2.30.1 1216 (16mm OD) pipe Metre 200.00
2.30.2 1620 (20mm OD) pipe Metre 221.00
2.30.3 2025 (25mm OD) pipe Metre 261.00
2.30.4 2532 (32mm OD) pipe Metre 339.00
2.30.5 3240 (40mm OD) pipe Metre 414.00

trenching & refilling and testing of joints complete as per
direction of Engineer In charge
External work
2.31.1 1216 (16mm OD) pipe Metre 178.00
2.31..2 1620 (20mm OD) pipe Metre 199.00
2.31.3 2025 (25mm OD) pipe Metre 239.00
2.31..4 2532 (32mm OD) pipe Metre 317.00
2.31.5 3240 (40mm OD) pipe Metre 392.00
2.32 Supply & fixing G.I. Union ISI marked in G.I. pipe line as
required complete in all respect of size :
2.32.1 15mm dia nominal bore Each 101.00
BSR_S2 [237]
Chapter
Code No
1 2 3 4

2.33 Providing and fixing Superior quality CP Brass fittings of

approved make as per direction of Engineer-in-charge
2.33.1 Pillar Cock 15 mm nominal size Each 823.00

2.33.2 Swan neck pillar cock 15 mm nominal size Each 1580.00
2.33.3 Bib Cock with long thread 15 mm nominal size Each 823.00
2.33.4 Long body Bib Cock 15 mm nominal size Each 1084.00
2.33.5 Two way Bib Cock 15 mm nominal size Each 1174.00
2.33.6 Angular stop cock with long thread 15 mm nominal size Each 762.00
2.33.7 Stop cock long thread Each 799.00
2.33.8 Stop cock with reduced body Each 1016.00
2.33.9 Concealed stop cock 15 mm nominal size Each 1162.00
2.33.10 Sink cock with swinging casted spout (table mounted ) 15 mm Each 1621.00
nominal size
2.33.11 Single lever wash basin mixer with 450 mm long copper Each 4659.00
connection pipe
2.33.12 Central hole basin mixer Each 2698.00
2.33.13 Wall mixer 3 in 1 system with provision of tetephonic bath Each 3743.00
shower with bend pipe
2.33.14 600 mm long towel rail Each 1801.00
2.33.15 Revolving type towel ring Each 1101.00
2.33.16 Soap dish Each 1071.00
2.33.17 Double coat hook Each 823.00
2.33.18 190 mm rain shower Each 5583.00
2.33.19 Shower arm Each 1210.00
2.33.20 Paper holder Each 1125.00
2.33.21 Hand shower with 8 mm dia 1 mt long PVC tube & wall hook Each 1832.00
complete
2.33.22 Health focet (Premium heavy Quality) as approved by Each 950.00
Engineer-in-Charge
2.33.23 Jet Spray (Premium heavy Quality) as approved by Engineer- Each 600.00
in-Charge
BSR_S2 [238]
Chapter
Code No
1 2 3 4
2.34 Providing and fixing 3-layer PP-R (Polypropylene random

coplymer ) pipes SDR 7.4 UV stabilized and antimicrobial
fusion welded, having thermal stability for hot & cold water
supply including all PP-R plain & brass threaded
Polypropylene random fittings and fixing the pipe with clamps
at 1 metre spacing. This includes testing of joint complete as
per direction of Engineer - in charge.( INTERNAL WORK-
EXPOSED ON WALL)
2.34.1 PN-16 Pipe, 16 mm OD Rm 173.00
2.34.2 PN-16 Pipe, 20 mm OD Rm 198.00
2.34.3 PN-16 Pipe, 25 mm OD Rm 284.00
2.34.4 PN-16 Pipe, 32 mm OD Rm 397.00
2.34.5 PN-16 Pipe, 40 mm OD Rm 550.00
2.34.6 PN-16 Pipe, 50 mm OD Rm 799.00

Polypropylene random fittings and fixing the pipe with clamps
at 1 metre spacing. This includes cost of cutting chases and
making good the same including testing of joint complete as
per direction of Engineer - in charge.(CONCEALED WORK
INCLUDING CUTTING CHASES AND MAKING GOOD
THE WALL ETC.)
2.35.1 PN-16 Pipe, 16 mm OD Rm 237.00
2.35.2 PN-16 Pipe, 20 mm OD Rm 265.00
2.35.3 PN-16 Pipe, 25 mm OD Rm 342.00
2.35.4 PN-16 Pipe, 32 mm OD Rm 455.00

Polypropylene random fittings including trenching, refilling
and testing of joint complete as per direction of Engineer - in
charge. (EXTERNAL WORKS)
2.36.1 PN-16 Pipe, 16 mm OD Rm 156.00
2.36.2 PN-16 Pipe, 20 mm OD Rm 185.00
2.36.3 PN-16 Pipe, 25 mm OD Rm 262.00
2.36.4 PN-16 Pipe, 32 mm OD Rm 376.00
2.36.5 PN-16 Pipe, 40 mm OD Rm 528.00
2.36.6 PN-16 Pipe, 50 mm OD Rm 681.00
2.36.7 PN-16 Pipe, 63 mm OD Rm 1146.00
BSR_S2 [239]
Chapter
Code No
1 2 3 4
2.37 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes (IS 15778 : 2007 code) having thermal stability for hot
& cold water supply including all CPVC plain & brass
threaded fittings i/c fixing the pipe with clamps at 1 metre
spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and testing of joints complete as
per direction of Engineer in Charge. (Internal work Exposed
on wall)
2.37.1 15 mm nominal size Rm 191.00
2.37.2 20mm nominal size Rm 222.00

threaded fittings i/c fixing the pipe with clamps at 1.00 m
spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of cutting chases and
making good the same including testing of joints complete as
per direction of Engineer in Charge. (Concealed work
including cutting chases and making good the walls etc.,)

threaded fittings, this included jointing of pipes & fittings with
one step CPVC solvent cement , trenching refilling & testing
of joints complete as per direction of Engineer in Charge.
(External work).

BSR_S2 [240]
Chapter
Code No
1 2 3 4
2.40 Providing and fixing Premium quality Towel rack 600mm Each 3089.00
long 260mm wide with lower hangers CP Brass fittings of
approved make as per direction of Engineer-in-charge
2.41 Labour Charges for Removing & Refixing the water Storage Each 369.00
Tank of all sizes and including all Necessary fitting complete
in all respect as per approved sample and direction of engineer
in charge.
2.42 Providing and fixing premium quality Angular stop cock Each 1572.00
15mm with wall flange complete as per sample approved by
Engineer in charge
2.43 Providing and fixing premium quality Two way Bib cock Each 2335.00
15mm with wall flange complete as per sample approved by
Engineer in charge
2.44 Providing and fixing superior quality PVC Tank Cover

complete as per approved by Engineer In Charge
2.44.1 300 Lt. capacity Each 186.00
2.44.2 500 Lt. capacity Each 201.00
2.44.3 Above 500 Lt. capacity Each 216.00
2.45 Providing & fixing C.I. Saddle pieces 100mm dia with nut & Each 196.00
bolt & washer & Rubber Gasket complete as per direction of
engineer in charge
2.46 Supply and installation of Premium quality sluice valve 100mm dia Each 5042.00
including all fittings as per approved by Engineer in charge.
2.47 Providing Laying Jointing DI Pipe (Ductile iron pipe) of 100 Mtr 1088.00
mm dia ISI marked K-7 grade as per IS : 5329-2000 with
internal cement mortar lining for potable water with rubber
ring (EPDM/ SBR) Joints per IS : 5382-1985 complete
including Hydraulic testing & commissioning as per
Technical Specification.
2.48 P&F Sluice valve of approved code IS 14846 : 2000 make

2.48.1 100 mm dia nominal bore Each 10175.00
2.48.2 75 mm dia nominal bore Each 9625.00
BSR_S2 [241]
Chapter
Code No
1 2 3 4
2.49 P&F Divertors in water supply lines for walls, wash basin etc Each 10450.00
2.50 P & F of Water Spout Superior Quality of approve make. Each 1870.00
2.51 P&F Sink Mixture of (Adjustable or Non Adjustable) Superior Each 5060.00
quality Swan Neck.
BSR_S2 [242]
CHAPTER : S-3
DRAINAGE / DISPOSAL WORK
Note :-
1 For laying of S.W. pipes beyond 1.2m depth, earthwork &
close timbering or open timbering (as per site conditions) is to
be paid extra.
2 The rates for S.W. pipes are applicable to work executed in
soils above sub-soil water level. Extra allowance is to be made
for working under sub-soil water level.
3 Rock cutting wherever required will be paid extra.
Chapter
Code No
1 2 3 4
STONEWARE PIPES & FITTING

3.1 Providing Laying & jointing glazed S.W. pipes grade À`
(IS;651 marked) of approved make with spun yarn & stiff
mixture of cement mortar 1:1, excavation & refilling of earth
in all types of soil upto 1.2m depth, S.W. fittings, including
testing of joints etc, complete.
3.1.1 100mm dia Mtr. 252.00
3.1.2 150mm dia Mtr. 406.00
3.1.3 200mm dia Mtr. 565.00
3.1.4 230mm dia Mtr. 639.00
3.1.5 250mm dia Mtr. 745.00
3.1.6 300mm dia Mtr. 1044.00
3.1.7 400mm dia Mtr. 1526.00
Note:-
1 If grade ÀA S.W. pipes (IS:651 mark) are used then add 5%
2 Deduct 5% if jointing is done in CM 1:3.
3.2 Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm

nominal size) all around S.W. pipe including 15 Cm. thick bed
concrete (Width W= Diameter of pipe in Cm+30 Cm.)(
Excluding cost of pipe)
3.2.1 100mm dia S.W. pipe Mtr. 457.00
3.2.2 150mm dia S.W. pipe Mtr. 550.00
3.2.3 200mm dia S.W. pipe Mtr. 560.00
3.2.4 230mm dia S.W. pipe Mtr. 713.00
3.2.5 250mm dia S.W. pipe Mtr. 754.00
3.2.6 300mm dia S.W. pipe Mtr. 867.00
3.2.7 350mm dia S.W. pipe Mtr. 981.00
3.2.8 400mm dia S.W. pipe Mtr. 1095.00
BSR_S3 [243]
Chapter
Code No
1 2 3 4
3.3 Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm

nominal size) upto haunches of S.W. pipes including 150 mm
thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.)
concrete width to be reduced from width W at center of pipe to
`0` at top of pipe. (Excluding cost of pipe)
3.3.1 100mm dia S.W. pipe Mtr. 217.00
3.3.2 150mm dia S.W. pipe Mtr. 353.00
3.3.3 200mm dia S.W. pipe Mtr. 413.00
3.3.4 230mm dia S.W. pipe Mtr. 453.00
3.3.5 250mm dia S.W. pipe Mtr. 482.00
3.3.6 300mm dia S.W. pipe Mtr. 557.00
3.3.7 350mm dia S.W. pipe Mtr. 635.00
3.3.8 400mm dia S.W. pipe Mtr. 713.00
3.4 Providing & fixing S.W. square mouth Gully trap À` grade
(IS 651-1992 marked) of approved make & design in existing
man-hole.
3.4.1 Size 100 X 100mm Each 182.00
3.4.2 Size 150 X 100mm Each 195.00
3.4.3 Size 225 X 150mm Each 253.00
3.5 P & F Square-mouth gully trap À` grade (IS 651-1992

:marked) of approved make complete with C.I. grating, frame
& Cover masonary chamber in C.M. 1:6, 100mm thick C.C.
1:5:10 base concrete, 40mm thick C.C.M-15 grade coping,
12mm thick cement plaster in CM 1:3 complete as per
approved design & type.
3.5.1 Trap size 150 X 100mm, ferrow cement cover with frame, Each 1150.00
Internal Chamber size 300 X 300mm.
3.5.2 Trap size 225 X 150 mm, ferrow cement cover with frame Each 1529.00
Internal Chamber size 450 X 450mm.
3.6 P & F S.W. Master Trap (Inter-cepting) À` grade (I.S.: 651
marked) of approved quality/make
3.6.1 100mm dia Each 344.00
3.6.2 150mm dia Each 486.00
3.7 Labour charges for Removing S.W. pipes including breaking

of joints & bed concrete, stacking of useful material at site
within 50 mtr. Lead and disposal of unserviceable material
within 0.5 Km. lead:
3.7.1 100 & 150mm dia pipe Mtr. 23.00
3.7.2 200, 230 & 250mm dia pipe Mtr. 25.00
BSR_S3 [244]
Chapter
Code No
1 2 3 4
3.7.3 300mm dia pipe Mtr. 26.00

3.7.4 350mm dia pipe Mtr. 30.00
3.7.5 400mm dia pipe Mtr. 31.00
R.C.C. NON PRESSURE PIPES

3.8 Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure
pipes (IS : 458mark) of approved make with collars, jointed
with C.M. 1:2 or having Spigot and socket ends with flexible
rubber rings joint including testing of joints etc. complete :
3.8.1 100mm dia Internal Mtr. 488.00
3.8.9 700 mm dia Internal Mtr. 2721.00
Note : Deduct 20 % for Non ISI marked pipes of all size
SAND-CAST IRON SOIL, WATER & RAIN WATER

PIPES.
3.9 P & F Sand-cast Iron (S.C.I.) Pipe (IS : 1729mark) of .
approved make in wall or in floor with M.S. holder bat clamps
in 10 X 10 X 10 Cm. M-15 grade concrete blocks, joints filled
with CM 1:4 with spun yarn including cutting holes and
making good the wall:
3.9.1 50mm dia Mtr. 759.00
3.9.2 75mm dia Mtr. 952.00
3.9.3 100mm dia Mtr. 1228.00
3.9.4 150mm dia Mtr. 2036.00
3.10 Add extra for Lead caulked joints (IS:782-1978) in sand cast
iron pipes/spun-
3.10.1 75mm dia, 0.88 Kg. Pig lead Each 289.00
BSR_S3 [245]
Chapter
Code No
1 2 3 4
3.11 P &F S.C.I. Fittings (IS : 1729 mark) in CM 1:4 with spun
yarn.
3.11.1 50mm w/o door
(i) Socket Each 319.00
(ii) Cowel Each 405.00
(iii) Tee Each 587.00
(iv) Bend Each 476.00
3.11.2 75 mm w/o door

(i) Offset Each 535.00
(ii) Socket Each 376.00
(iii) D/door Y-Tee Each 883.00
(iv) Cowel Each 475.00
(v) Tee Each 668.00
(vi) Bend Each 549.00
(vii) Door Cross Each 648.00
3.11.3 100mm-do-
(i) Offset Each 884.00
(ii) Socket Each 450.00
(iii) D/door Y-Tee Each 1230.00
(iv) Cowel Each 561.00
(v) Tee Each 915.00
(vi) Bend Each 662.00
(vii) Door Cross Each 706.00
3.11.4 150mm w/o door

(i) Socket Each 1008.00
(ii) Cowel Each 1133.00
(iii) Bend Each 1412.00
3.11.5 50mm with door

(i) Tee Each 684.00
(ii) Bend Each 547.00
3.11.6 75mm-do-
(i) Tee Each 711.00
3.11.7 100mm-do-
(i) Tee Each 949.00
BSR_S3 [246]
Chapter
Code No
1 2 3 4
3.11.8 150mm-do-
(i) Tee Each 1979.00
3.12 P & F Sand –cast Floor Trap (Nahni) of (IS:1729 mark) of

approved quality/make with socket down or hinged grating
including cutting and making good the floor.
3.12.1 Size 100 x 100mm Each 832.00
3.12.2 Size 100 x 75mm Each 792.00
3.12.3 Size 100 x 50mm Each 436.00
3.13 P & F Sand-cast Iron `P` or `S` Trap (IS:1729 make) of Each 927.00
approved make.
3.14 Labour charges for making connection of sewer line through Each 649.00
main hole.
3.15 Labour charges for removing C.I./A.C . pipes of all sizes Mtr. 33.00
including accessories with care and stacking of useful
material.
RIGID PVC PIPE
3.16 2
P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm .)
approved quality /make including joining the pipe with
solvent cement rubber ring and lubricant.
3.16.1 63 mm dia Mtr 147
3.16.2 75 mm dia Mtr 177
3.16.3 110 mm dia Mtr 282
3.16.4 160 mm dia Mtr 463
3.16.5 Providing & Laying C.C. 1:3:6 (Stone Agreegate 20mm
nominal size) all around PVC Pipe including 7.5 cm thick bed
concerte [Width & Height = Dia of Pipe in CM+15CM]
excluding cost of Pipe & Excavation of trenches etc.
3.16.5.1 PVC pipe 110 mm dia Mtr. 325
3.16.5.2 PVC pipe 160 mm dia Mtr. 425
3.17 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved
quality /make including joining the pipe with solvent cement
rubber ring and lubricant:
3.17.1 Coupler (socket)
(i) 75mm dia Each 87
(ii) 110mm dia Each 108
(iii) 160 mm dia Each 119
BSR_S3 [247]
Chapter
Code No
1 2 3 4
3.17.2 Reducer 110 X 75 mm
3.17.3 Plain Tee

3.17.4 Door Tee

3.17.5 Door 'Y'

3.17.6 Double 'Y'

3.17.7 Double Door 'Y'

3.17.8 Bend 45
3.17.9 Bend 87 .5
3.17.10 Door Bend (Top Side)

BSR_S3 [248]
Chapter
Code No
1 2 3 4
3.17.11 Door Bend (Left & Right)
3.17.12 Vent Cowel

3.17.13 Socket plug

3.17.14 Door Cap

3.17.15 Pipe Clip

3.17.16 W.C. connector with lipring

110mm dia Each 213
3.17.17 W.C. connector bent type

110mm dia Each 223
3.17.18 Plain floor trap

110mm dia Each 230
3.17.19 Multi floor trap

110mm dia Each 266
3.17.20 height Raiser

110mm dia Each 213
3.17.21 Top Tile& straine

110mm dia Each 80
BSR_S3 [249]
Chapter
Code No
1 2 3 4
3.17.22 Top Tile only
110mm dia Each 62
3.17.23 P- Trap
110mm dia Each 382
3.17.24 Q- Trap
110mm dia Each 428
3.17.25 S- trap
110mm dia Each 535
3.17.26 Ring fitting

110mm dia Each 108
3.17.274 Gully trap

110mm dia Each 561
3.18 Raising manhole cover and frames slab to required level

including dismantling existing slab and making good the
damage as required (raising depth of manhole masonry to be
paid separately).
3.18.1 Rectangular manhole 90x60 cm Each 972
3.18.2 Rectangular manhole 150x120 cm Each 1487
3.19 Construction of manhole in all type of soil inner size 90 X 60

Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement
concrete 1:5:10 in foundation, 20 mm thick inside plaster in
CM 1:6, finished with floating neat cement, 50mm thick M-15
grade C.C. flooring, making channels, 80mm thick stone slab
covering with 40mm thick M-15 grade C.C. flooring, Cement
cover with frame of 450mm dia, earthwork etc. complete as
per design including disposal of surplus earth within 50 mtr.
lead.
3.19.1 Depth up to 0.5 M Each 5489
3.19.2 Add extra over item 3.19.1 for every additional 0.10m depth Each 206
above 0.5 m depth.
3.19.3 Deduct in Item No 3.19.1 for manhole with brick work 230 Each 1042
mm thick in place of 300 mm thick stone masonry
BSR_S3 [250]
Chapter
Code No
1 2 3 4
3.20 Construction of Man hole, in all types of soil, inner size 1.5 x
1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick
cement concrete 1:5:10 in foundation, 20mm thick inside
plaster in CM 1:6, finished with floating neat cement, 50 mm
thick M-15 grade C.C. flooring making channels, 80 mm thick
stone slab covering with 40 mm thick M-15 grade C.C.
flooring, Ferro Cement cover with frame of 450mm dia,
earthwork etc. complete including disposal of surplus earth
within 50 mtr. lead as per design :
3.20.1 Depth up to 1.5 M Each 20016
3.20.2 Add extra over item 3.20.1 for every additional 0.10m depth Each 703
above 1.5 m depth .
3.21 Construction of chamber in all type of soil with 300 mm thick

masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation,
20mm thick insider plaster in Cm 1:6, finished with floating
neat cement, 50mm thick M-15 grade C.C. flooring ,
earthwork etc. complete as per design including disposal of
surplus earth within a lead of 50 mtr.
3.21.1 Inside size 300 X 300 mm depth upto 0.5 M Cement cover Each 1049
with frame.
3.21.1.1 Deduct for using brick work 230 mm thick in place of 300 455
mm thick stone masonry
3.21.2 -do- size 450 x 450mm depth upto 0.5 M Cement cover with Each 2332
frame
3.21.3 -do- size 600 x 450mm depth upto 0.5 M Cement cover with Each 3299
frame.
3.22.4 -do- depth upto 0.5 M to 1.0 M –do- Each 3628

BSR_S3 [251]
Chapter
Code No
1 2 3 4
3.22 Construction of soakage well in all type of soil with 300 mm
thick dry masonry, top and bottom 300 mm course in CM 1:6,
80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal,
Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork
complete as per approved drawing including disposal of earth
within a lead of 50 mtr.:
3.22.1 Size 300 Cm. dia outside & 300 Cm. depth . Each 24135
3.22.2 -do- & 240 Cm. Depth. Each 22138
3.22.3 Size 240 Cm. dia outside & 240 Cm. depth. Each 16100
3.23 Construction of soakage Trench in all types of soil with 300

mm thick dry stone masonry, 80 mm thick stone slab
covering, jointing of slab in CM 1:3 Ralthal, Kharanja, 40 mm
thick M-15grade C.C. flooring earthwork etc. complete as per
approved drawing including disposal of earth within a lead of
50 Mtr.:
3.23.1 Top width 180Cm., bottom width 90Cm. & depth 240Cm. Mtr. 6149
3.23.2 -do- 240 Cm., -do- 150Cm. & depth 300 Cm Mtr. 10397
3.24 Construction of Soakage well in all types of soil of approved

drawing, top 90 Cm .Portion in 450mm thick masonry with
CM 1:6, 80 mm thick stone slab covering, jointing of slab
in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C
flooring, earth work etc . complete including disposal of
surplus earth within a lead of 50 mtr .
3.24.1 Inner dia 90 Cm & 10 to 12 Mtr deep. Each 5478
3.24.2 Inner dia 60 Cm & 10 to 12 Mtr deep. Each 5160
3.25 Labour charges for construction of Soakage well of 90 Cm. dia Mtr 99
(Earth –work & its disposal ,with in a lead of 0.5 Km .only ).
3.26 Add extra if Soakage Well is filled with dry stones. Cum 399
3.27 Construction of septic Tank in all types of soil with 40 Cm

.thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-
15 grade C.C floor & RCC slab covering with M15 grade c.c.
floor, 50 mm thick stone slab partition walls, 20 mm thick
plaster in CM 1:6 finished with neat floating cement, 4 Nos
stone foot rests of approved design ,two No. 450 mm dia each
Ferro cement cover with frame, earth work etc. complete as
per approved drawing including disposal of surplus earth
within a lead of 50 mtr:-
BSR_S3 [252]
Chapter
Code No
1 2 3 4
3.27.1 Size 200x100x130 cm.(for 10 users) with 115 mm thick RCC Each 27322
(M-20) slab with Tor steel reinforcement 8mm ϕ @15 cm c/c
bothways including shuttering complete in all respect.
3.27.2 Size 230 x110 x150 cm.(for 20 users) with 115 mm thick Each 38499
RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15
cm c/c bothways including shuttering complete in all respect.
3.27.3 Size 400 x140x150 cm.(for 50 users) with 115 mm thick RCC Each 59860
(M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c
bothways including shuttering complete in all respect.
Note :- Add or subtract proportionately for every 0.5 M increase
or decrease in Length -12.5% Breadth & Depth -18 %
each
3.28 Emptying of Septic tank ,Soakage well etc. by disposing or Cum 286
sludge upto 5 Km. lead & taking out sewage including
cleaning of site.
3.29 Add extra if R.C.C slab of designed thickness & reinforcement Sqm 215
is provided on manhole in place of stone slab( Actual area of
R.C.C slab to be measured).
3.30 P & F M.S. Foot Rests in with C.M.,1:3, standard design in Each 223
20mm square M.S. bar 50 mm embedded in wall & 10 cms.
projected out complete.
3.31 Supplying and fixing C.I. Cover with frame, C.I. gratings for Kg. 72
chambers & man holes.
3.32 Supplying and fixing Ferro- cement cover with C.I. frame
for chambers & man holes of size.
3.32.1 450mm dia, 5Kg. C.I. frame to with stand 3 MT center point Each 1355
load & minimum unfractured load of 1 MT. (Light duty).
3.32.2 500mm dia 12 Kg.-do-15 MT centre point load (medium duty). Each 2487
3.32.3 500mm dia 22 Kg.-do-22 MT centre point load (Heavy duty). Each 3906
3.32.4 500mm dia 25 Kg.-do-70 MT centre point load seal type Each 4080
(Heavy duty.)
3.32.5 Rectangular shape 600 x 450 mm, to withstand 3 MT Each 1357
center point load & minimum unfractured load of 1 MT.
(Light duty).
3.33 Supplying & Fixing R.C.C. Manholes covers with frame of

approved make (Light duty).
BSR_S3 [253]
Chapter
Code No
1 2 3 4
3.33.1 Size 500mm dia (Double seal) Each 329
3.33.2 Size 450mm dia Each 292
3.33.3 Size 400mm dia Each 219
3.33.4 Size 600 X 600mm (Double seal) Each 502
3.33.5 Size 600 X 450mm Each 421
3.33.6 Size 450 X 450mm Each 319
3.33.7 Size 300 X 300mm Each 99
3.33.8 Size 250 X 250mm Each 81
3.33.9 Size 180 X 180mm Each 73
3.34 Construction of Open Surface Drain with 112mm thick brick

masonry in CM 1:4,110mm thick base concrete 1:5:10, 37mm
thick M-15 grade C.C. flooring ,12mm 1:4 cement plaster on
all exposed faces of walls including top surface excavation &
disposal of earth complete as per approved design/drawing:
3.34.1 112mm drain,225mm Av. depth Mtr. 271

3.35 Construction of open Drain with 112mm thick brick masonry

in CM 1:4 Semi circular S.W. glazed channel (confirming to
IS Standards) fixed with cement mortar 1:1 over a bed of
100mm thick C.C. 1:5:10, filling of edged with M-15 grade
C.C. flooring, 12mm cement plaster 1:4, over all exposed
faces, excavation & disposal of earth with in a lead of 50 mtr
complete as per approved drawings :
3.35.1 112 mm drain,225mm Av. depth width 10 Cm S.W. glazed Mtr 435
channel.
3.35.2 150 mm drain,225mm Av. depth width 15 Cm S.W. glazed Mtr. 502
channel.
3.35.3 250 mm drain,225mm Av. depth width 25 Cm S.W. glazed Mtr. 876
channel.
3.36 Extra For additional 5 Cm. Average depth of drain of all sizes. Mtr. 35
BSR_S3 [254]
Chapter
Code No
1 2 3 4
3.37 P & F precast dense cement concrete (Vibro-pressed) drain
section Block of different size as per approved drawing and
design and strength as per IS code 2185 part I of grade 'D'
(5.00mm2) proper quality of additive/admixture like plasticizer
etc. added to produce high quality and durable drain section
Blocks of 'L' shape 'U' shape etc. as per approved design and
drawing complete with fixing and joining in C.M.1:4 in proper
grade and level complete in all respect including earth work
and disposal of surplus earth within 0.5 Km. lead. (cost of
Steel/ welded mesh etc. shall be paid extra).
3.37.1 40mm thick Sqm. 418

3.37.2 Upto 60mm thick Sqm. 518
3.37.3 Upto 80mm thick Sqm. 634
3.38 Construction of Cement Concrete Chamber 125mm dia.
3.38.1 C.P. Brass grating Each 167

3.38.2 C.P. Brass doom grating Each 177
3.38.3 C.I. Grating Each 152
3.38.4 Stainless Steel Sheet Grating Each 171
3.39 Construction of Cement Concrete Chamber 125mm dia on

depressed floor upto 45cm height from floor with :
3.39.1 C.P. Brass grating Each 237

3.39.2 C.P. doom grating Each 263
3.39.3 C.I. Grating Each 218
3.39.4 Stainless Steel Sheet Grating Each 237
SPUN-CENTRIFUGALLY CAST IRON SOIL WATER

PIPES:-
3.40 Providing & fixing Spun –Centrifugally cast Iron Pipes (IS :
3989 Mark ) of Approved make in wall or in floor with M.S.
Holder bat clamps in 10 X 10 X10 Cm. M-15 Grade concrete
blocks, joints filled with CM 1:4 with spun yarn including
cutting holes and making good the wall:-
3.40.1 75 mm dia Mtr 1062
3.40.2 100 mm dia Mtr 1299
3.40.3 150 mm dia Mtr 2186
BSR_S3 [255]
Chapter
Code No
1 2 3 4
3.41 Providing & fixing Spun –Centrifugally cast Iron Pipes fitting
(IS : 3989 Mark ) in CM 1:4 with spun Yarn.
(i) Offset Each 594
(ii) Socket Each 362
(iii) D/Door Y-Tee Each 867
(iv) Bend Each 472
(v) Door Cross Each 1187
(vi) Cowel Each 432
(vii) Tee Each 670
3.41.2 100 mm –do-

(i) Offset Each 809
(ii) Socket Each 519
(iv) Bend Each 655
(v) Door Cross Each 1272
(vi) Cowel Each 539
(vii) Tee Each 895
3.41.3 150 mm –do-

(i) Socket Each 1045
(ii) D/Door Y-Tee Each 2628
(iii) Bend Each 1315
(iv) Door Cross Each 2409
(v) Cowel Each 1079
(vi) Tee Each 1964

(i) Bend Each 552
(ii) Door Cross Each 777
(iii) Tee Each 722

(i) Bend Each 728
(iii) Tee Each 989

(i) Bend Each 1509
(iii) Tee Each 2164
BSR_S3 [256]
Chapter
Code No
1 2 3 4
3.42 Providing and Fixing Spun –Cast Iron floor trap (Nahani) of
(IS :3989 Mark ) approved quality / make with socket down or
hinged grating including cutting and making good the floor :-
3.42.1 Size 100 x 100 mm Each 1000
3.42.2 Size 100 x 75 mm Each 782
3.43 Add 10% extra Over Item No. 3.41 if the pipes are laid under
suspended condition under the roof.
UPVC SOIL WASTE & RAIN WATER (SWR ) PIPES
3.44 Providing and Fixing Unplasticized Poly Vinyl Chloride

(UPVC) SWR Pipes Type B for sciland waste discharge
system (IS:13592 : 1992 Marked) of approved quality /make
3.44.1 75 mm dia Mtr. 167
3.44.2 110 mm dia Mtr. 336
3.45 Providing and Fixing Unplasticized Poly Vinyl Chloride

(UPVC) SWR Pipes fittings type B for sciland waste discharge
system (IS:13592 : 1992 Marked) of approved quality /make
3.45.1 Coupler
3.45.2 Repair Coupler

3.45.3 Single Push Fit Coupler

3.45.4 Bend 87.5 Dg.

3.45.5 Bend 45 Dg.

3.45.6 Door Bend 87.5 Dg.

BSR_S3 [257]
Chapter
Code No
1 2 3 4
3.45.7 Single 'Y'
3.45.8 Single 'Y' with Door

3.45.9 Double 'Y'

3.45.10 Double 'Y' with Door

3.45.11 Socket Plug

3.45.12 Pipe Clip

3.45.13 Double tee with Door

3.45.14 W.C. Connector

110mm dia Each 216
3.45.15 W.C. Connector (Bend) with ring

110mm dia Each 226
3.45.16 Single Tee

3.45.17 Single Tee with Door

BSR_S3 [258]
Chapter
Code No
1 2 3 4
3.45.18 Double Tee (4 Ways)
3.45.19 Multi floor trap

110mm dia Each 241
3.45.20 Offset
110mm dia Each 282
3.45.21 Extra Square Jali

110mm dia Each 37
3.45.22 Extra Round Jali

110mm dia Each 26
3.45.23 Extra 4 SWR Ring

3.45.24 Gully Trap

110mm dia Each 685
3.45.25 Nahni Trap with Jali 4”

110mm dia Each 171
3.45.26 Nahni Trap without Jali 4”

110mm dia Each 152
3.45.27 Nahni Trap with Jali 3”

75 mm dia Each 153
3.45.28 Nahni Trap without Jali 3”

75 mm dia Each 135
3.45.29 Vent Cowel

75 mm Each 48
3.45.30 Vent Cowel

110mm dia Each 59
BSR_S3 [259]
Chapter
Code No
1 2 3 4
3.46 Providing & fixing Spun –Centrifugally cast Iron Pipes fitting
(IS : 3989 Mark ) in CM 1:4 with spun Yarn 100mm w/o door
as per direction of Engineer-in-Charge.
(a) P Trap of standard size Each 936
(b) Long P Trap (900mm) Each 2695
(c) Long P Bend Each 923
(d) Long Floor Trap (600mm) Each 1656
3.47 Removing & Re fixing of S.C.I. Pipe and Spun Pipe with
C.I.clip as per direction of Engineer-in-Charge of following
diameters :-
(a) 100mm dia Each 182
(b) 150mm dia Each 145
3.48 Cleaning of sewer line of various sizes as per requirement at Rmt 117
site of different sizes including 100mm,150mm & 225mm dia
of Stoneware pipe as per direction of Engineer-in-Charge.
3.49 Cleaning of C.I. Pipe Line of various sizse as per requirement Rmt 73
at site of different sizes including 100mm,150mm & 225mm
dia of C.I.Pipes as per direction of Engineer-in-Charge.
3.50 Repairing of Cement Concrete Chambers of different size as Each 61

per requirement at site and as per direction of Engineer-in-
charge.
3.51 Providing & fixing Hubless Spun –Centrifugally cast Iron

Pipes (IS : 15905 Mark ) of Approved make in wall or in floor
with M.S. Holder bat clamps in 10 X 10 X10 Cm. M-15 Grade
concrete blocks, joints filled with CM 1:4 with spun yarn
including cutting holes and making good the wall:-
3.51.1 75 mm dia Rmt 1128
3.51.2 100 mm dia Rmt 1372
3.51.3 150 mm dia Rmt 2240
3.52 Providing & fixing Hubless Spun –Centrifugally cast Iron

Pipes fitting (IS : 15905 Mark ) in CM 1:4 with spun Yarn.
(i) Offset (130mm) Each 562
(ii) Shielded (SS) Coupling (With EPDM Rubber) Each 460
(iv) Bend Each 300
(v) Cowel Each 383
(vi) Tee Each 400
BSR_S3 [260]
Chapter
Code No
1 2 3 4
3.52.2 100mm W/o door
(i) Ofset (130mm) Each 780
(ii) Shielded (SS) Coupling (With EPDM Rubber) Each 502
(iv) Bend Each 427
(v) Cowel Each 494
(vi) Tee Each 703
3.52.3 150mm W/o door

(i) Shielded (SS) Coupling (With EPDM Rubber) Each 703
(ii) D/Door Y-Tee Each 2047
(iii) Bend Each 902
(iv) Cowel Each 1048
(v) Tee Each 2024
3.52.4 75mm with door, bend Each 408

(i) Bend Each 652
(ii) Tee Each 890
3.53 Mechanised Cleaning of sewer line of diameter upto 200mm mtr 154
with the help of trolley mounted electrical driven machine
having flexible steel springs of length 20ft. Each which are
rotated with the help of electric motor and clutch assembly.
3.54 Mechanised sewer line Cleaning upto diameter 100mm with mtr 107
the help of PU coated glass fibre rod mounted on a wheel with
brush attachment.
3.55 Mechanised Cleaning and desilting of manhole/sewer line

chambers With the help of mechanical bucket which gets open
and close through levers.
3.55.1 depth upto 0.5 mtr. Each 98
3.55.2 Depth upto 1.0 mtr. Each 182
3.56 Suplying and Fixing Ductile iron Man Hole Covers/storm Kg. 182
water grating and gratingwith frame of various sizes weight
and types and load bearing capacity as per EN -124 ,superior
quality or equivalent, comlete as per Direction of Engineer In
charge.
BSR_S3 [261]
Chapter
Code No
1 2 3 4
3.57 Providing and fixing circular air tight composite resin (FRP)
manhole cover without frame of approved brand with grade
designation C-250 HD as per EN-124 standard. Manhole
Cover shall have top abrasion resistant layer conforming to IS-
15658:2006 and permissible permanent set value of 1.9mm
after the application of 2/3 test load in five continuous
application as per EN-124, the testing shall be performed in
fully equipped and NABL certified test lab with random batch
test (2% of lot size) as per testing procedure stated in EN-124
standard including fixing in existing manhole frame etc.
complete in all respect as directed by Engineer in Charge.
(i) Internal dia 0.56m Each 11679.00
manhole cover without frame of approved brand with grade
designation D-400 EHD as per EN-124 standard. Manhole
Cover shall have top abrasion resistant layer conforming to IS-
standard including fixing in existing manhole frame etc.
complete in all respect as directed by Engineer in Charge.
manhole cover with frame of approved brand with grade
designation C-250 HD as per EN-124 standard. Manhole
Cover & Frame shall have top abrasion resistant layer
conforming to IS-15658:2006 and permissible permanent set
value of 1.9mm after the application of 2/3 test load in five
continuous application as per EN-124, the testing shall be
performed in fully equipped and NABL certified test lab with
random batch test (2% of lot size) as per testing procedure
stated in EN-124 standard including fixing with M-20 concrete
etc. complete in all respect as directed by Engineer in Charge.
(ii) Internal dia 0.60m Each 15070.00
BSR_S3 [262]
Chapter
Code No
1 2 3 4
manhole cover with frame of approved brand with grade
designation D-400 EHD as per EN-124 standard. Manhole
(ii) Internal dia 0.60m Each 20910.00
3.61 Providing and fixing rectangular air tight composite resin

(FRP) Manhole Cover with frame of approved brand with
grade designation C-250 HD as per EN-124 standard. Manhole
(i) Internal Size 0.45 m x 0.60 m Each 12482.00
(ii) Internal Size 0.45 m x 0.90 m Each 15751.00
(iii) Internal Size 0.60 m x 0.90 m Each 23305.00
(iv) Internal Size 0.90 mx 1.20 m Each 63342.00

(FRP) Manhole Cover with frame of approved brand with
grade designation D-400 EHD as per EN-124 standard.
Manhole Cover & Frame shall have top abrasion resistant
layer conforming to IS-15658:2006 and permissible permanent
set value of 1.9mm after the application of 2/3 test load in five
BSR_S3 [263]
Chapter
Code No
1 2 3 4

(iv) Internal Size 0.90 mx 1.20 m Each 77173.00

(FRP) Grating with frame of approved brand with grade
designation C-250 HD as per EN-124 standard. Grating with &
Frame shall have top abrasion resistant layer conforming to IS-
standard including fixing with M-20 concrete etc. completein
all respect as directed by Engineer in Charge.
(iv) Internal Size 0.90 m x 0.60 m Each 24533.00
(v) Internal Size 0.90 m x 0.90 m Each 40403.00
(vi) Internal Size 1.20 m x 0.60 m Each 35564.00

(FRP) Grating with frame of approved brand with grade
designation D-400 EHD as per EN-124 standard. Grating &
Frame shall have top abrasion resistant layer conforming to IS-
standard including fixing with M-20 concrete etc. complete in
all respect as directed by Engineer in Charge.
(iv) Internal Size 0.90 m x 0.60 m Each 35167.00
(v) Internal Size 0.90 m x 0.90 m Each 50930.00
(vi) Internal Size 1.20 m x 0.60 m Each 47550.00
BSR_S3 [264]
CHAPTER : S-4
TUBE WELL
Chapter
Code No
1 2 3 4
4.1 Construction of tube-well from ground level and upto 100

Meter depth and above sizes in all types of soils in alluvium
strata by “bailing” method and without gravel packing as per
IS: 2800 (Part - I& II) 1979 specifications (The work includes
formation of cavity well at bottom by development with
appropriate air compressor or bailer pumping and also
lowering of casing pipe but excluding cost of the casing pipe.
The tube-well should have a throughout bore as per nominal
bore of casing pipe. The work would be completed after
obtaining sand free water.)
4.1.1 100 mm dia Nominal bore. R Mtr. 279.00

4.1.2 125mm-do-. R Mtr. 319.00
4.1.3 150mm-do- R Mtr. 347.00
4.2 Construction of Tube-well upto 100 Meter depth and above in

all type of rocks by DTH system and over burden, to
accommodate casing pipe of following sizes in all types of
soils and over burden including lowering of casing pipes, but
excluding cost of casing pipes as per IS : 2800 (Part I & II)
1979 specifications. The work would be completed after
obtaining sand free water. The tube well should have a
throughout bore as per nominal dia of casing pipe:
4.2.1 100 mm dia Nominal bore. R.Mtr. 380.00

4.2.2 125mm-do-. R.Mtr. 399.00
4.2.3 150mm-do- R.Mtr. 666.00
4.2.4 200 mm –do- R.Mtr. 999.00
BSR_S4 [265]
Chapter
Code No
1 2 3 4
4.3 Construction of tube-well from ground levels and upto 100
Meter depth and above to accommodate housing and assembly
pipe of following sizes in all types of alluvium strata by
percussion/ rotary drilling method and with gravel as per
IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as
amended upto date (the work includes the cost of gravel & its
primary packing and packing during development, lowering of
housing & strainer assembly pipes, with supply and wrapping
of coir-rope, wherever necessary, for arresting fine sand
particles. The work will not include cost of housing pipe and
strainer pipe assembly and development work, but work would
be completed after obtaining sand free water).
4.3.1 150 mm Nominal bore. R Mtr. 1065.00
4.3.2 200mm –do-. R Mtr. 1464.00
4.3.3 250mm –do-. R Mtr. 1863.00
4.4 Development of tube well as per IS specification using Hr. 600.00

suitable compressor to give sand free water for required yield
of the gravel packed tube well.
4.5 Supply of ERW M.S. black casing pipe ISI marked

(IS:4270/1992) of grade Fe410 of following sizes at site of
work.
4.5.1 100 mm Nominal bore of pipe Mtr. 822.00
4.6 Supply of strainer pipes made of ERW M.S. black pipe ISI
mark of following sizes at the site of work including required
size of slotting as per IS:8110-1985.
4.6.1 150 mm Nominal Bore. Mtr. 1527.00
4.6.2 200mm-do-. Mtr. 2031.00
4.6.3 250mm-do-. Mtr. 3126.00
4.7 Testing verticality of tube-well by plumbing system and yield Each 8385.00
test and draw down test by pumping system as per IS: 2800
(Part II) 1979.
BSR_S4 [266]
Chapter
Code No
1 2 3 4
4.8 S & F tube well cover of M.S.sheet (6mm thick) with nuts
and bolts complete for casing size:
4.8.1 100mm dia Each 186.00

4.8.2 125mm dia Each 227.00
4.8.3 150mm dia Each 279.00
4.8.4 200mm dia Each 373.00
4.8.5 250mm dia Each 399.00
4.9 S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and Each 266.00
bolts etc. for holding the riser pipe assembly of submersible
pump set.
4.10 Supply of 50mm dia G.I. medium class pipe(each length 5.8 m Each 11979.00
to 6.0m) tripod as per drawing and design with chain pulley of.
3MT capacity
4.11 Installation of submersible motor pump set in Tube-well/open 3727.00

well complete ( labour charges only) including transportation Each
of tripod, chain pulley block & any other material required for
lowering purpose.
4.12 P & F 60 cm. wide M.S. ladder in open well made of flat iron 227.00
Mtr.
32×5mm and 10mm dia bars @ 200mm c/c with angle iron
hold fasts at suitable interval complete as per drawing.
4.13 Installation of India mark II hand pump set, complete on Each 932.00
existing plate form.
4.14 Construction of 185 cm. dia platform as per approved Each 2928.00
design and drawing of UNICEF.
4.15 Supplying of India mark II hand pump set complete marked Each 8652.00
with cylinder and ten connecting rods etc. IS 1239
4.16 Supplying and installation of 32 mm dia G.I. pipe medium Mtr. 333.00
class IS 1239 marked in 3m length including all accessories
and fittings required for installation of hand pump.
BSR_S4 [267]
Chapter
Code No
1 2 3 4
4.17 Supplying and installation of submersible pumping motor
pump sets I.S.I. Marked (IS : 8034-1989 ) of approved make
like K.S.B., KIRLOSKAR, Calama etc. or equivalent, making
connection suitable for T.W./D.C.B./Open well. The job
includes screwing and welding of flanges on G.I. riser pipes,
installation of complete fitting and accessories, with riser
pipes, jointing of electrical cables and other connections
making switch board electrical connections, all labour for
testing of submersible pump set and supply of water to water
mains, complete in all respect (Refer Electrical BSR )
4.18 For item of earthing refer to Electrical BSR .
4.19 For item of submersible cable refer to Electrical BSR.
4.20 for Item of panel board refer to Electrical BSR
4.21 Providing & lowering of G.I. Pipes, flange pipe including

rubber washer and nuts of 8 mm dia complete in all respect
I.S.1239 Marked.
4.21.1 B Class 50 mm dia R. Mtr. 498.00
4.22 Un-lowering of submersible pump set with all piping from a Each 4659.00
tube-well/ open-well complete (labour charge only ) including Job
transportation of tripod, chain, pulley-block and other
materials required and lowering of repaired/ new pump in the
tube-well / open-well complete in all respect.
RAIN WATER HARVESTING

4.23 Construction of tubewell up to 100m depth and above to
accomodate housing and assembly pipe in all types of
alluvium strata by rotay drilling method with "code of practice
for construction and testing of tubewells (IS:2800 (Part-II) :
1991 and IS:2800 (Part-II) :1979 both amended up to date)
with supply of bail plug if necessary.The work will not include
cost of housing pipe and strainer pipe assembly cost, gravel
and development work. Work would be deemed completed
only after obtaining sound free water during pumping.
4.23.1 150 mm nominal bore Rm 799.00
BSR_S4 [268]
Chapter
Code No
1 2 3 4
4.24 Construction of Recharge Shaft in filter pit including Earth
work Excavation , lifting excavted earth with all lift and 50 m
lead and centering & shuttering evenever required.
4.24.1 Diameter 900 mm Rm 266.00
4.24.2 Diameter 750 mm Rm 233.00
4.25 Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge
shaft of M20 mix with 40 mm thickness
4.25.1 Diameter 900 mm Rm 766.00
4.25.2 Diameter 750 mm Rm 666.00
4.26 Supply & lowering air line of 25mm dia, G.I. pipe 'B' class Rm 300.00
having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-
Zag fashion & making air vent at top including the cost of Tee-
Nipples, Elbow, Socket etc.
4.27 Supply and lowering vent air pipe 63mm dia rigid PVC Rm 154.00
pipe(IS 4985) mark class II (4kg per cm2 ) with required all
necessary fittings including perforation of 3 to 5 mm size all
around the pipe at a distance of 180 to 220mm in zig zag
fashion and making air vent at top complete as per direction of
Engineer incharge.
4.28 Supply & lying River-gravels of following sizes in recharge

shaft, filter pit after screening & washing from kachha shift
without deduction of voids
4.28.1 Size 9 to 12 mm Cum 1997.00
4.28.2 Size 3 to 5 mm Cum 2928.00
4.29 Supply & laying of clean, clear sharp river sand of size 1 to Cum 3727.00
2mm coarse, without deduction of voids.
BSR_S4 [269]
Chapter
Code No
1 2 3 4
BSR_S4 [270]
CHAPTER H-1
SUPPLY OF MANURE, INSCTICIDES,
The rates are inclusive of all taxes etc. and for estimation
Note :
purpose only.
Chapter
Code No
1 2 3 4
Supply of dry manure including loading

1.1
unloading,transportation & stacking at site.
1.1.1 Farm yard manure(organic) Cum. 720.00
1.1.2 Compost Cum. 960.00
1.1.3 Goat dungmanure. Cum. 1200.00
Vermi compost Per 50 kg
1.1.4 250.00
Bag
Neemcack Per 50 kg
1.1.5 1250.00
Bag
Supply of Chemical Fertilizers at store in bags weighing not

1.2 less than 50 kg each including loading unloading &
transportation
Urea Per 50 kg
1.2.1 400.00
Bag
DAP Per 50 kg
1.2.2 1500.00
Bag
Super Phosphate Per 50 kg
1.2.3 350.00
Bag
Murrate of Photash Per 50 kg
1.2.4 450.00
Bag
Straw Meal Per 50 kg
1.2.5 1080.00
Bag
Bonemeal Per 50 kg
1.2.6 1800.00
Bag
Calcium Nitrate Per 50 kg
1.2.7 2500.00
Bag
Supply & Stacking good soil of earth at site complete

1.3
including loading unloading & Transportation etc.
1.3.1 Good soil of earth Cum. 240.00
Supply of insecticides & Pesticides at store in dust/liquid form

1.4
complete.
Methyl Prathion 2% Per 25 kg
1.4.1 500.00
Bag
H-1 [271]
Chapter
Code No
1 2 3 4
Karathion (Liquid) Per 250

1.4.2 600.00
ml
1.4.3 Metacid(Liquid) Per Litre 444.00
1.4.4 Rogor(Liquid) Per Litre 325.00
1.4.5 Cholorophyriphos 20 Ec. Per Litre 400.00
Bauiston 50% Per 100
1.4.6 120.00
Grams
1.5 Supply of Garden Tools & implements at store complete.

1.5.1 Spade weighing 1.5kg with Handle Each 175.00
1.5.2 Khurpa weighing 500gm with Handle Each 90.00
1.5.3 Gurvana weighing 800 gm with Handle(Kamani Steel) Each 108.00
1.5.4 Hedge Shear(Kamani Steel) Each 720.00
1.5.5 Secaetur Each 360.00
1.5.6 Garden Rack with Handle Each 192.00
1.5.7 Pick Axe Each 180.00
Supply of different sized pots at site store including loading

1.6
unloading & transportation etc. complete.
1.6.1 Cement pot 300 mm size Each 150.00
1.6.2 Cement pot 350 mm size Each 216.00
1.6.3 Cement pot 375 mm size Each
1.6.6 Asbestos pot 350 mm size Each 120.00
1.6.7 Asbestos pot 400 mm size Each
Supply of different sized earthen pots at site/store including

1.7
loading unloading & transportation etc.complete
1.7.1 Earthen pot 150 mm size Each 18.00
1.7.5 Earthen pot 225 mm size( Kundi shape) Each 30.00
Supply of different sized lawn mower including transportation

1.8
etc. as store complete.
1.8.1 300 mm size Hand Lawn Mower(Roller Type) Each 4320.00
1.8.2 350 mm size Hand Lawn Mower(Roller Type) Each 4800.00
H-1 [272]
Chapter
Code No
1 2 3 4
1.8.3 450 mm size Hand Lawn Mower(Roller Type) Each

1.8.3 300 mm Electric Lawn Mower Each 18000.00
1.8.8 Electric Lawn Mower sarfex 16 EL Each 30000.00
Supply of different size Tokaras/Tokaries etc at store complete

1.9
1.9.1 Big size(600mm dia) Each 150.00
1.9.2 Small size(450 mm dia) Each 90.00
1.9.3 Jute Band( Ssutli) Per kg 140.00
1.9.4 Broom ( Bamboo) Per kg 50.00
1.9.5 Anti Bird Net Rmt 25.00
1.9.6 Shed Net 50% Sqm 25.00
1.9.7 Shed Net 75% Sqm 30.00
1.9.8 Shed Net 90% Sqm 35.00
Supply of PVC hose pipe of different sizes at store including

1.10
transportation etc. complete.
1.10.1 50 mm dia R/Mtr. 165.00
1.10.2 38 mm dia R/Mtr. 140.00
1.10.3 25 mm dia R/Mtr. 80.00
1.10.4 17 mm dia R/Mtr. 65.00
1.10.5 12.5 mm dia R/Mtr. 45.00
Supply of different varities of tree/shrubs/climbers according

1.11 to height and age of the plant at side including
loading/unloading & transportation etc.complete
1.11.1 Different flowering plants 900mm to1500mm Each 50 to 150
1.11.2 Different varieties of shrubs 600mm to 900 mm Each 25 to 160
1.11.3 Different varieties of climbers 900mm to 1500 mm Each 48 to 144
Supply of different varieties of bougainvillea in ply

bags/earthen pot according to height growth and age of plant at
1.12
site including loading unloading and transportation etc.
complete
1.12.1 Local variety of bougainvillea 600mm to 900mm Each 25 to 60
1.12.2 Different varieties of bougainvillea 600mm to 900mm Each 60 to 120
H-1 [273]
Chapter
Code No
1 2 3 4
Supply of different varieties of rose plants in poly bag/ earthen

1.13 pot according to height growth and age of the plant at site
including loading unloading and transportation etc. complete
1.13.1 Desi rose / root stock plant Each 40 to 50
1.13.2 Ganganagari rose plant in poly beg Each 80 to 125
1.13.3 Different varieties of grafted rose plants in poly bag Each 84 to 102
Different varieties of grafted rose plants in poly pot/earthen
1.13.4 Each 200 t0 250
pot
Supply of different varieties of palms in poly bags/earthen pot

1.14 according to height growth and age of plant at site including
loading unloading and transportation etc. complete
1.14.1 Raffish palm 2 to 2.2 feet Each 350.00
1.14.2 Deshi palm 2 to 3 feet Each 150.00
1.14.3 China palm 1 to 1.5 feet Each 125.00
1.14.4 Arica palm many branches 5 to 6 feet Each 400 to 500
1.14.5 Bottle palm 5 to 8 feet Each 700 to 900
Fox tale palm 5 to 8 feet
1.14.6 Each 900 to 1200
Fish tale palm 5 to 8 feet
1.14.7 Each 900 to 1200
T cycuss 3 feet 5 feet
1.14.8 Each 900 to 1200
Supply of different varieties of indoor plants in poly
bags/earthen pot according to height growth and age of plant at
1.15
site including loading unloading and transportation etc.
complete
1.15.1 Deshi crotons Each 50 to 60
1.15.2 Selective varieties of crotons 2 to 3 feet Each 72 to 180
Crotons Bangalore 1.5 to 2 feet
1.15.3 Each 250 to 2300
1.15.4 Rubber plants etc Each 120 to 150
1.15.5 Arica palm Each
1.15.5 DAFFEN Bachia 1.5 to 2 feet Each 100 to 250
1.15.6 Song of India 1.5 to 2.5 feet Each 100 to 200
1.15.7 Aglonmia 1.5 to 2 feet Each 110 to 175
1.15.8 Drassina 1 to 2 feet Each 100 to 240
1.15.9 Sin gonium with moss stick 2 to 3 feet Each 125 to 250
1.15.10 Cycussevelta 50mm to 75 mm dia Each 1200
Furcaria gignita 50mm to 75 mm
1.15.11 Each 900 to 1000
Different fycus plants tolairy 100mm to 125 cm height
1.15.12 Each 800 to 1000
H-1 [274]
Chapter
Code No
1 2 3 4
1.15.13 Different champa 125 cm to 215 cm height Each 400 to 900
Supply of different varieties of blubs including loading
1.16
unloading and transportation etc. complete
1.16.1 Supply of different varieties of caladium blubs Each 18.00
1.16.2 Supply of different varieties of amrilis lilly bulb Each 25.00
1.16.3 Supply of tube rose bulbs Each 12.00
1.16.4 Supply of hemaniths bulb Each 28.00
1.16.5 Supply of Asiatic Lilly bulb Each 30.00
1.16.6 Supply of oriental lilly bulb Each 42.00
1.16.7 Supply of different variety of gladioli bulb Each 18.00
Supply of flower Garlands & Flower petal‟s including

1.17
transportation at site.(Complete)
1.17.1 Merigold Garland A Class ( Big flowers) 2 feet long Each 75.00
1.17.2 Merigold Garland B Class ( Small flowers) 1.5 feet long Each 50.00
1.17.3 Green Garland ( Ashok Leaf) 2 feet long Each 15.00
1.17.4 Rose Garland 1.5 feet long Each 125.00
1.17.5 Jalusi Garland( VIP A Class) Double fold Each 500.00
1.17.6 Jalusi Garland( VIP B Class) Single fold Each 400.00
1.17.7 Mogra Garland 1.5 feet long Each 125.00
1.17.8 Kunj Garland 1.0 feet long Each 150.00
1.17.9 Rose petal‟s Per Kg. 400.00
1.17.10 Merigold petal‟s Per Kg. 250.00
1.17.11 Crisenthimum petal‟s Per Kg. 300.00
1.17.12 Chandine flower Per Kg. 300.00
1.17.13 Mogra Flower Per Kg. 450.00
1.17.14 Kunj Flower Per Kg. 475.00
Supply of Cut Flower at site including transportation

1.18
Complete
1.18.1 Tata Rose Each 15.00
1.18.2 Carnation Each 18.00
1.18.3 Gladioli Each 20.00
1.18.4 Tube rose single Each 12.00
1.18.5 Tube rose double Each 15.00
1.18.6 Ilium Asiatic Each 75.00
1.18.7 Ilium Oriental Each 125.00
1.18.8 An thorium Each 75.00
1.18.9 Arched Mix Each 40.00
1.18.10 Zarbera Each 20.00
1.18.11 Dasy Each 25.00
1.18.12 Chrysanthemum Each 20.00
1.18.13 Candytuft Each 4.00
H-1 [275]
Chapter
Code No
1 2 3 4
1.18.14 Aster Each 6.00
1.18.15 Lotus Each 40.00
Supply of Flower Bucket & flower Bunch at site including
1.19
transportation ( Complete)
1.19.1 Flower Bunch / Bucket ( 20 Roses) Each 500.00
1.19.2 Flower Bunch / Bucket ( 30 Roses, Carnation) Each 700.00
1.19.3 Flower Bunch / Bucket ( 7 Lily & 15 Roses) Each 950.00
Flower Bunch / Bucket ( 10 Lily, 20 Roses & Carnation Mix)
1.19.4 Each 1800.00
1.19.5 Flower Bunch / Bucket ( 15 Lily ) Each 1650.00
1.19.6 Flat Flower Bucket ( 20 Mix Flower‟s) Each 490.00
1.19.7 Flat Flower Bunch ( 25 Mix Flower‟s) lily Carnation Rose Each 1200.00
1.19.8 Flower Bunch / Bucket (Small 15 Flower Stic) Each 400.00
1.19.9 Flower Bunch / Bucket ( 10 Roses, 5 Carnation) Each 350.00
1.19.10 Flower Bunch / Bucket ( 15 Roses) Each 280.00
New Items
1.20 Hybrid Seasonal Plants of Flowring
1.20.1 In P.B many branches (7”X8”) Each 32.00
1.20.2 In Tray (100 Plants) Each 1000.00
Fully developed many branches Daheliya plant in pots (12”
1.20.3 Each 150.00
Pot‟s)
Fully developed many branches Chrysanthemum(Guldaudi)
1.20.4 Plants Special varieties in pots (12” Pot‟s) Each 125.00
1.20.5 Fully developed many branches Marigold in pots Each 125.00

1.21 Ground Cover of various varieties
1.21.1 Syngonium in P.B(7”X8”) - 6”-1‟ Each 60.00
1.21.2 Ribbion grass P.B (7”X8”) - 6” Each 50.00
1.21.3 Lalsaggin P.B(5”X5”) - 6” Each 12.00
1.21.4 Lenthrain P.B - 6” Each 12.00
1.21.5 Vadaliain P.B - 6” Each 8.00
1.21.6 Jade Plant in P.B(7”X8”) - 6” Each 40.00
1.21.7 Pendanus in P.B(9”X11”) - 1‟ Each 85.00
1.22 Hedges of various varieties
1.22.1 Golden durantain P.B(5”X6”) - 6”-1‟ Each 20.00
1.22.2 TecomaGoudichoudi in P.B(9”X11”) - 2‟ Each 80.00
1.22.3 Enarmi in P.B(5”X5”) - 1‟ Each 15.00
1.23 Diffrant varieties of Scented Plants
1.23.1 Mograin P.B(9”X11”) - 1‟ Each 80.00
1.23.2 Gardenia in P.B(9”X11”) - 1‟ Each 100.00
1.23.3 Juhiin P.B(9”X11”) - 1‟ Each 80.00
1.23.4 Kunjin P.B(9”X11”) - 1‟ Each 80.00
H-1 [276]
Chapter
Code No
1 2 3 4
Madhukamini(Round Shaped dwarf variety)
1.23.5 in P.B(9”X11”) -1‟ Each 125.00
1.23.6 Raat Rani in P.B(9”X11”) - 2‟-3‟ Each 80.00

1.24 Ornamental Plants of different varieties
1.24.1 Arucaria Plant in P.B(9”X11”) - 1½‟- 2‟ Each 225.00
1.24.2 Saplera variegated in P.B(9”X11”) - 1‟-2‟ 110.00
1.24.3 Money Plant in P.B(9”X11”) - 1‟ Each 80.00
Money Plant (with moss stick)
1.24.4 Each 300.00
In (12” Pot‟s) - 2‟-3‟
1.24.5 Florodendon Plant in P.B(9”X11”) - 1‟ Each 100.00
1.24.6 Florodendon Plant in round shape pot (12” Pot‟s) 1½‟- 2‟ Each 285.00
1.24.7 Phonic Palm in P.B(15”x15”) - 2‟-3‟ 280.00
Ixora Palm Many branches at flowring stage in P.B(12”X12”) -
1.24.8 Each 200.00
2‟-3‟
1.24.9 IxoraChinesisin Pot (8” Pot‟s) - 6”-1‟ Each 150.00
1.24.10 Silver Eucain P.B(9”X11”) - 1‟-2‟ Each 100.00
1.24.11 Umbrella Palm in P.B(9”X12”) - 2‟ Each 90.00
1.24.12 Salem in Pot (12” Pot‟s)- 2‟ Each 205.00
Canna variegated, yellow, red and pink etc.
1.24.13 Each 40.00
In P.B(8”X8”) - 6”-1‟
1.24.14 Geranium in P.B(9”X11”) - 1‟ Each 85.00
Euphorbia Milii
1.24.15 Each 140.00
D.varietiesin P.B(12”X2”) - 1‟-1½‟
1.24.16 Kalanchoe of Different varieties in P.B(8”X8”) - 6”-1‟ Each 125.00
Bamboo plant of Different varieties in P.B(12”X12”) - 2‟-3‟
1.24.17 Each 210.00
1.24.18 Bamboo plant of Different varieties P.B(14”X14”) - 4‟-5‟ Each 445.00
1.24.19 Nolinaplamin P.B(12”X12”) - 1‟-2‟ Each 160.00
Mussaenda plant of many branches in P.B(12”X12”) - 1½‟-
1.24.20 Each 180.00
2½‟
1.24.21 Different varieties of Ficus plant in P.B(9”X11”) - 2‟ Each 125.00
1.24.22 Different varieties of Poinsettia in Fiber pot (10” Pot‟s) – 1‟ Each 300.00
1.24.23 Spathiphyllum (peace lily) in pot (8” Pot‟s) - 6”-1‟ Each 125.00
1.24.24 ThujaOrientalis plant (12” Pot‟s) 1‟-2‟ Each 200.00
1.25 Different varieties of Shady plants
1.25.1 Height 5‟-6‟ (14”x14”) Many Branches Each 125.00
1.25.2 Height 7‟-8‟ (18”x18”)Many Branches state steam Each 250.00
H-1 [277]
CHAPTER H-2
MAINTENANCE OF GRADENS
The rates are inclusive of all taxes etc. and for
Note :
estimation purpose only.
Chapter
Code No
1 2 3 4
2.1 Maintenance of lawn
2.1.1 Spreading of manure , good earth in required

thickness (cost of manure and good earth to be cub 24.00
separately )
2.1.2 Irrigation of lawn Per hect. Per day 1440.00
2.1.3 Uprooting weeds from the lawn plots and trenched
area after 10 to 15 days of its flooding with including 100 sqm 240.00
disposal of uprooted vegetation
2.1.4 Moving manually / with power machines

(a) Manually Per hect 1560.00
(b) with power machine Per hect 1200.00
2.1.5 Maintenance of shrubbery or hedges cutting

100 sqm 480.00
including disposal of rubbish with all leads and lifts
2.1.6 Sweeping / cleaning of gardens roads lawns paths
100sqm 3.50
and disposal of all rubbish
2.1.7 Security of the garden per gate for 24 hours in 3 shift
Per day 24 hours 19440.00
with the exilitary persons
2.1.8 Maintenance /fitting of permanent ornamental pots/

seasonal pots
(a) Mixing earth and manure in per portion as specified
cum 42.00
or directed for pots
(b) Filling and planting of sapling and watering of pots Per 100 pots per
180.00
day
(c) Weeding hoeing stacking and coloring of pots Per 100 pots per
180.00
material will be supplied by the department day
2.1.9 Preparation of beds for budging and shrubbery by

excavating 60cms. Deep and trenching the excavated
base to a further depth of 30 cms . refilling the Each 24.00
excavated earth after breaking clods and mixing with
manure in ratio of 8:1 ( 8 part of stacked volume )
H-2 [278]
Chapter
Code No
1 2 3 4
2.2 Digging pits in ordinary soil and refilling the same

with the excavated earth mixed with manure in the
ratio of 2:1 by volume ( 2parts of stacked volume of
each 24.00
earth after reduction by 20% 1 part of stacked
volume of manure after reduction by 8%) flooding
wit
2.3 Planting of annual saplings watering in the bed sqm 2.40
2.4 watering of group plantation in bed sqm 0.30
2.5 Preparation of edging lawn Rmt 0.72
2.6 Group plantation in the bed at specified place sqm 2.40
H-2 [279]
CHAPTER H-3
DEVELOPMENT OF GRADENS
Note : The rates are inclusive of all taxes etc. and for estimation purpose only.
Chapter
Code No
1 2 3 4
3.1 Laying of lawns including ploughing leveling breaking of

clods manuring and removal of stones etc. (cost of manure or
extra good earth to be paid separately )maintenance of lawn
foe 30 days or more till the grass forms a thick lawns free from
weeds and fit for moving in the duration of planting if lawn
die some where the contractor will replant it at his own cost
3.1.1 In rows 15 cm apart in either direction 100 sqm 3000.00
3.1.2 in rows 7.5 cm apart in either direction 100sqm 5500.00
3.1.3 in rows 5 cm apart in either direction 100 sqm 6600.00
3.1.4 Laying of Selection No.1 grass tiles (2‟X2‟ size) for sqm 250.00
development of garden, including levelling of soil and
spreading of manure
3.1.5 Maxican(Carpet) grass tiles (2‟X2‟ size) for development of sqm 400.00
garden, including levelling of soil and spreading of manure
3.1.6 Dugging of weedy soil from garden including loading and Cum 250.00
unloading of the soil and throwing it away out of the city
3.2 Renovating lawns including weeding cheeping the grass 100sqm 4500.00
forking the ground top dressing with manure . Mixing the
same with forked soil watering maintaining the lawn for 30
days for till the grass forms a thick lawns free from weeds and
fit for moving in the duration of planting if lawn die some
where the contractor will replant it at his own cost
3.3 Planting of trees /shrubs/ hedge and climbers plants at desired 100 30.00
distance in row and watering plants
3.4 Preparation of different sized bed as directed 100 sqm 456.00
H-3 [280]
CHAPTER H-4
MAINTENANCE OF RODS SIDE PLANTATION
Chapter
Code No
1 2 3 4
4.1
Preparation of soil including cleaning & removing of Per 100
(a) 150.00
unwanted shrubs removal of stones & Garbage. Sqm
Digging of pits size 60x60x60 cms. Including removal of
(b) stones Manuring applicable of insecticides & watering atleast Per Pit 30.00
15 litre per plant after plan ting.
Loading & unloading of plant from Deptt.Nursery to site per Per 1000
(c) 150.00
km. Plants
Preparation of Thavala sizing 60 cms. Diametre & 10 cms. Per
(d) 1.20
Deep once in a month. Thawala
Inter cultural operations hoeing & weeding etc. in 90 cms. Dia
(e) Per Plants 2.00
& 15 cms. Deep.
Watering of plants with the own tanker i.e. at least 20 liter
(f) Per Plants 1.40
water for plant at one time
Transportation of tree guards from Depot to the plantation site Per Tree
(g) 18.00
including loading & unloading. Guard
Security of plants & fencing etc.
Per Plant
(h) 0.90
Per month
Prunning & trumming and cutting of old big trees on the road
(i) Per tree 120.00
side The contractor will deposit the cut wood in the Deptt.
Maintenace of Plants by the contractor including of pits/bids

watering preparation of Thavala Hoeing weeding etc. &
Per Plant
4.2 application of insecticides etc. & security if the plant die 18.00
Per month
during maintenance contractor has to replace same height
plant at his own cost.
H-4 [281]
CHAPTER H-5
DETAIL OF PLANTATIONS AND MAINTENANCE OF
PLANTS ON ROAD SIDE FOR FIVE YEARS
Chapter
Code No
1 2 3 4
5.1 Supply & Planting of shady plants ( Neem. Peepal, Goolar, Per Plant 1886.00
Jamun, Imli or other specified) along road side including the
following activities:-
(i) Preparation of soil including cleaning & removing of
unwanted shrubs removal of stones & garbage.
(ii) Supply of plant at site of two years of age & height more than
1.50 Mtr.
(iii) Supply of dry manure(Farm yard manure organic)
(iv) Supply of Insecticides.
(v) Digging of pits size 60x60x60 cms. Including removal of
stones. Manuring application of insecticides & watering at
least 1.5 Liter per plant after planting
(vi) Half brick Circular tree guard in second class bricks, internal
dia 1.25 meter and height 1.20 meter above ground and 0.20
meter above ground and 0.20 meterr below ground. Bottom
two courses laid dry and top three couses in cement mortar 1:6
( 1 Cement : 6 Sand) and the intermediate courseses being in
dry honey comb masonry. As per design complete.
(vii) Watering to plants
(viii) Maintance of plants by the contractor including pits,
preparation of Thavala Hoeing weeding etc & application of
insecticiedes etc. & security. If the plant die during maintence
contractor has to rplace same heingh plant at his own cost.
5.2 Supply & Panting of ornamental plants ( Kachnar, Amaltas, Per Plant 2198.00
Gulmohar, Arjun, Kala, Siris, Jacranda etc. or other specified)
along road side including the following activities :-
unwanted shrubs removal of stones & garbage
(ii) Supply of plant at site of two years of age & height more than
1.50 Mtr.
(iii) Supply of dry manure( Farm yard manure organic)
(iv) Supply of Insecticides
least 1.5 liter per plant after planting.
H-5 [282]
Chapter
Code No
1 2 3 4
(vi) Half brick Circular tree guard in second class bricks. Internal
dia 1.25 meter and height 1.20 meter above ground and 0.20
meter below ground. Bottom two courses laid dry and top
three courses in cement morter 1:6(1 Cement : 6 Sand) and the
intermediate courses being in dry honey comb masonry. As per
design complete.
(vii) Waterring to Plants.
(viii) Maintenance of plants by the contractor including pits.
Preparation of Thavala Hoeing weeding etc. & application of
insecticides etc. & security. If the plant die during
maintencance contractor has to replace same height plant at his
own cost.
5.3 Planting & Maintenance of shrubs. Per Plant 1069.00

Planting of shrubs in central verge
unwanted shrubs removal of stones & garbage.
(ii) Supply of plant at site like Bouganvillia & Kaner.
(iii) Supply of dry manure( Farm yard manure organic)
(iv) Supply of Insecticides
least 1.5 liter per plant after planting.
(vi) Waterring to Plants.
(vii) Maintenance of plants by the contractor including pits.
Preparation of Thavala Hoeing weeding etc. & application of
insecticides etc. & security. If the plant die during
maintencance contractor has to replace same height plant at his
own cost.
H-5 [283]
Chapter
Code No
1 2 3 4
H-5 [284]
M-1
OFFICE OF THE CHIEF ENGINEER, PWD (B & R), RAJASTHAN, JAIPUR.
CIRCULAR No. 19 (Building 6)

Sub : General Instructions to be followed while preparing detailed estimates.
It has been observed that while submitting estimates for Technical sanction instructions
contained in Section 5 of the Manual of Orders of PWD/B&R and those issued by previous
Circular are not followed strictly, it is therefore, enjoined upon all the detailed estimates for
works costing more than Rs. 3.00 lacs and requiring technical sanction by Addl. Chief
Engineer and submitted to this office should contain the following schedules and details :
1. SCHEDULES :
1.1 Schedule-I (Technical Report) :
Proforma at Annexure 'A' may be used for submission of a detailed report which
should be full & comprehensive and preferably written by the Executive Engineer.
1.2 Schedule-II (General Abstract) :
It should indicate abstract cost of the sub-work included in the sanctioned proposal
and provide for the increase in the market rates as may be approved by
Superintending Engineer.
1.3 Schedule-III
Detailed estimates of each sub-work with abstract of cost and details of quantities.
1.4 Schedule-IV (Drawing) :
(a) The drawings accompanying the detailed estimates should be as follows :-
(i) A site plan showing the situation of the proposed building with reference to
others, the various structure in proximity to the intended site, the North point,
the prevailing direction of the wind and other matters capable of graphic
delineation which may have influenced the selection.
(ii) A ground floor plan or plans of the building and plans of the foundations and
of various storeys as required.
(iii) Section through the buildings of such number and in such directions are
necessary to exhibit the intended form and dimensions of every part.
(iv) Such elevations as are necessary.

M-2
(v) A drawing or drawings showing the general arrangement of the floor and roof
and the distribution of timbers, iron work etc. and such working drawing as
will enable the officer responsible for the project to judge the details.
(b) The drawings should bear the signatures of authority approving the plan and other
details duly attested by Superintending Engineer.
(c) The drawings should clearly indicate the proposed works, existing portions,
dismantling work (if required in the existing building) in different colours.
2. GENERAL CONDITIONS :
2.1 The total estimated cost of the proposed construction should not exceed the
Administrative sanction. Only such work which can be built within the sanctioned
amount should be included in the detailed estimate. Detailed estimate for the portion
of work, which is although essential as per requirement of concerned department but
can not be included on account of inadequate sanction may be submitted as part ‘B’
to facilitate to move the case for Revised/Supplementary Administrative sanction.
2.2 In the case of estimate for Additions and Alterations the drawings and specifications
of existing buildings should also be submitted along with the estimate. If there is any
deviation from existing specifications, proper justification for the changes may be
reported.
2.3 Estimate should be submitted in quadruplicate so that a copy of sanctioned estimate

may be retained in Chief Engineer’s office and the remaining three could be made
available for circle, divisional and sub divisional office.
2.4 In the detailed estimates, the dimensions assumed in working out the quantities
should be susceptible of identification of the dimensions shown on the drawings.
Cross references to the dimensions of the estimates and also drawings should be
indicated.
2.5 The items of detailed estimate should conform to the specifications described in
technical report and also the PWD specifications.
2.6 Provisional rates for non-BSR items must be supported invariably by detailed rate
analysis approved by Superintending Engineer.
2.7 All building estimate must include detailed estimates for sanitary, electrification,
water supply and development works and no lump-sum provision on percentage basis
should be provided in the estimate.
2.8 Estimates for works incorporating RCC items must include complete RCC details and
bar bending schedules so as to facilitate in arriving at the correct quantities of
concrete and steel.
2.9 Wherever necessary, detailed estimates may be supported by sketches to supplement

drawings.
M-3
2.10 It those cases where a portion of work or entire work has already been taken in
hand/executed before issue of sanction the quantities of complete portion should be
taken as per actual measurements and a certificate to this effect may be recorded by
the Executive Engineer. The specifications already adopted should also be clearly
indicated in the technical report.
2.11 Detailed design for foundations and other structural components should be sent
alongwith the estimate.
2.12 The type of soil met within the foundation, the test carried out for assessing the SBC
of the soil at the foundation level, the SBC of the soil and the justification for the type
of foundation adopted should be given.
2.13 The Executive Engineer and Superintending Engineers should particularly examine
the foundation, the specifications for floors, roof windows and doors, ornamental
features, finishing item etc. and observe in the forwarding letter or in the report itself
the need for adopting expensive specifications.
Annexure ‘A’ to Circular No. 19 (Building-6)

TECHNICAL REPORT
1. GENERLAL
1.1 Name of Work
1.2 Circle
1.3 Division
2. AUTHORITY
2.1 Reference of Sanction
2.2 Amount of Administrative/Financial sanction (including/excluding the

prorata charges).
2.3 Reference and Abstract details of Forecast estimate (if any).
2.4 Reference of Technical sanction of work if any issued earlier.
3. LOCATION AND LAND
3.1 Location
3.2 Area
3.3 Possession taken over/not taken over.

M-4
4. REFERENCES OF APPROVED DRAWING
S. No. Details Drawing No. Authority
1. Site Plan
2. Plans
3. Sections
4. Elevations
5. Details of components.
6. Sanitary, Water Supply and Drawing
7. Electrifications
8. Other drawings.
5. DISCUSS THE PLANS SECTION & ELEVATIONS GENERAL
6. ESTIMATED COST
Estimated cost of portion shown in ‘Red’ Drawing No…….. including/exclusive of

prorata charges has been worked out as Rs………….
7. SOURCE OF MATERIAL
8. TYPE OF SOIL/S.B.C.
9. BRIEF SPECIFICATION (In case of A/A specification of existing may also be

indicated)
9.1 Foundation concrete.
9.2 Masonry in Foundation and plinth.
9.3 Damp proof course.
9.4 Superstructure (Type and specifications)
9.5 Lintels, Sun-shades etc.
9.6 Roofing
9.7 Interior finish
9.8 Exterior finish
9.9 Flooring (a) Base (b) Finish
9.10 Skirting and Dados
9.11 Windows (Frame, Panels, Wire gauging, Safety bars)

M-5
9.12 Doors (Frame and Shutters)
9.13 White/Colour/Cement lime/Decorative finish
9.14 Painting of Doors, Windows and Walls
9.15 Electrification (Type of Wiring, Fittings and Fixtures)
9.16 Sanitary & Water Supply

9.17 Compound wall and it’s gate
9.18 Other specifications.
10. SPECIAL FITTINGS AND FIXTURES (Fans, Tube-lights, Exhaust, Pumps,

Elevators etc.)
11. AGENCY FOR EXECUTION
12. PRESENT STAGE OF EXECUTION
13. COST ANALYSIS
13.1 B.S.R. adopted and premium approved by Superintending Engineer.
13.2 Tender Premium (Received/expected).
13.3 Total plinth area.
13.4 Break up of cost.
S.No. Component Total Cost Cost/Sqft. % age of total cost
(a) Foundation & plinth
(b) Superstructure work
(c) Roofing.
(d) Doors, Windows & Frames.
(e) Flooring.
(f) Finishing.
(g) Sanitary & water supply.
(h) Electrification.
(i) Development.
(j) Other items.
Total-
M-6
Total plinth area cost of Rs………../Sft. is higher/lower than the plinth area rate
Rs…….. adopted in forecast estimate.
14 OTHER SALIENT FEATURE THAT NEEDS SPECIFIC MENTION
Assistant Engineer Executive Engineer
Superintending Engineer
M-7
M-8
CIRCULAR No. 36
(6 Building)
Check-list for taking over newly constructed buildings from contractors
*****
It has been observed that at the time of handing over the completed buildings by this
department to client department/users lot of deficiencies are pointed out/reported by them.
This is due to the fact that while taking over these buildings from building contractors or
other agencies, the departmental officers do not examine them carefully and meticulously.
Also no uniform and proper procedure is adopted at present for the inspection of such
completed buildings except for checking items executed as per nomenclature mentioned in the
’G’ Schedule of agreements. To overcome this difficulty, a check-list for taking over/handing
over of such buildings is enclosed to enable the departmental officials to examine/inspect the
buildings at the time of their taking over/handing over in a systematic manner.
The check-list is in two parts (Part-I & II) and should be adopted for inspection at the initial
stage and then after 3-4 months specially during rainy season. These be prepared by
concerned Engineering Sub-ordinate incharge of work at the time taking over building/elect.
Works/sanitary works from respective contractors and shall be countersigned by AEN
Incharge of the work after necessary test-check of the list. One copy of such taking over
would always be kept in the record of the concerned Ex. Engineer for information and
reference. Superintending Engineers will inspect these records during their periodical
inspections of the works of the divisions.
Sd/-
(M.M. SWAROOP)
Chief Engineer, PWD
Rajasthan : Jaipur
M-9
BUILDING DIGEST
CENTRAL BUILDING RESEARCH INSTITUTE, INDIA
CHECK-LIST FOR TAKING-OVER NEWLY CONSTRUCTED BUILDING
INTRODUCTION
A large number of construction activities are being carried out by various organizations such
as CPWD, MES, State PWD, Housing Boards, Development Authorities, Improvement Trust
and Private Sector. There is a greater demand for the construction of houses on outright sale
basis. It has been observed that a number of complaints about the newly constructed buildings
are received by the authorities from the buyers/user at the time of taking over the houses.
Since there is mass construction going on, it has been observed that before taking over the
building from the builder/contractor, the departmental authorities are not able the examine the
buildings carefully, There are no proper guidelines laid down for the inspection of buildings
at the time of taking over, except the general conditions as laid down in the specifications for
the construction. There are several items involved in building and unless these are clearly
defined and listed, it is not feasible to check them. To meet the demand, a check-list has been
prepared to enable the authorities to examine/inspect the salient features before taking over
the buildings. Such lists should be prepared for every building and in case of large buildings,
the same may be divided in convenient parts and separate check-list prepared for each part.
APPROACH
An endeavor has, therefore, been made to give a check-list covering the different items so that
the inspecting authorities, before taking over the buildings, can examine/inspect the buildings
in systematic way. The list has been made in two parts. The Part-I gives the main building
items and points to be observed just after the completion of the buildings and before taking
over. In case there are any defects observed in the first taking-over inspection, the action for
rectification is to be incorporated and a second inspection is to be made before actually taking
over building. The Part-II gives the items and points that should be examined/inspected after
about 3-4 months and specially during the monsoon period keeping the time well before the
expiry of the maintenance guarantee period. This will provide the performance of the water
supply and sanitary installation in use and also the leakage and dampness in the building,
which may not be possible to be examined fully at the first stage of taking-over. For each
building these check-list proforma will be filled in, separately, at the time of inspection.
These proforma will also give useful information about the performance of various
specifications and construction techniques in use, at the initial stage, in different parts of the
country, so that a judicious selection for proper type in the region can be achieved.
M-10
CHECK-LIST FOR INSPECTION OF NEW BUILDINGS
Name & number of the

building…………………………………………………………….......
Date of completion of the building…………………Date of

inspection……………………….
Date of taking over the building……………………Date of handing

over.………………........
From the builder/contractor……………………to user…………………………………............
Follow
Type of Details
Item of Inspection up Remarks
Location Nature Action
PART – I
(Inspection to be carried out
before taking over newly
constructed building)
A - Inside Building
1. Walls
(i) Are Walls to plumb ?

(If no, indicate the location,
nature and action to be taken) Yes/No
(ii) Are Walls in proper

alignment?
(If no, indicate the location,
(iii) Are there any cracks in

Walls? (If yes, indicate the
location, nature i.e. vertical/
horizontal/ inclined and
action to be taken) Yes/No
(iv) Are there any signs of

dampness/leakage on Walls?
(If yes, indicate the location,
magnitude and action to be
taken) Yes/No
(v) Are all Walls examined ? Yes/No
2. Floors
(i) Are there any cracks in floor Yes/No

M-11
Follow
Type of Details
?
(If yes, indicate location and
action to be taken)
(ii) Is there any settlement in

floor ?
(If yes, indicate location and
(iii) Is the floor laid to proper

slope ?
(If no, indicate location and
(iv) Is the floor properly

finished/polished ?
(If no, indicate location,
(v) Are there any cracks in

skirting/dado ?
(If yes, indicate location,
(vi) Are all floors / dado

examined? Yes/No
3. Roofs.
(a) Flat Roofs
(i) Are there any cracks in

bottom/top?
(ii) Are there any leaks in roof?

(iii) Has the water-proofing,

treatment been laid properly
and to slope ?
nature and
(iv) Are rain water pipes properly

fitted and free
of choking ? Yes/No
M-12
Follow
Type of Details
nature and
(b) Sloping roofs
(i) Is the roof laid to proper

pitch/slope ? Yes/No
(ii) Are there any breakages in

tiles/sheet ? Yes/No
(iii) Is the gutter laid to slope with

proper joints?
nature and
(iv) Has proper preservative

treatment been given to the
steel/timber truss ?
(If no, indicate action to be
taken) Yes/No
(v) Is there any sagging/cracking

in ceiling ?
nature and
(vi) Is there sign of dampness in

ceiling ?
nature and
(vii) Are all roofs and ceilings

examined ? Yes/No
4. Doors, Windows and Ventilators
(i) Are all doors, windows and

ventilators opening and
closing smoothly ?
(ii) Are all doors windows and

ventilators properly painted/
polished ? Yes/No
M-13
Follow
Type of Details
(If no, indicate location, and
number
to be done)
(iii) Are all fittings viz. locking

arrangement, tower bolts,
door stoppers, hooks and
hinges etc. working smoothly
?
number to be
set right) Yes/No
(iv) Are all glass panes properly

fitted cleaned & crack-free ?
number to be
attend) Yes/No
5. Finishing
(i) Are all rooms properly white

washed, colour washed or
distempered.
number to be
attended) Yes/No
6. Fixtures
(a) Cupboards/shelves
(i) Are doors of cup boards

opening and closing
smoothly?
number to be set right) Yes/No
(ii) Are all fittings viz. hinges,

locking arrangement, tower
bolts etc. working smoothly? Yes/No
(iii) Are all cup-boards/shelves

examined ? Yes/No
(b) Chimney
(i) Is the hood and slope

provided to, have proper
function ? Yes/No
M-14
Follow
Type of Details
(If no, indicate action to set
right)
7. Water Supply and Sanitation
(i) Are pipes properly fixed to

wall at required spacing and
are not loose ?
number to be set right) Yes/No
(ii) Are there any leakages in the

pipe joints ?
number and action to be
taken) Yes/No
(iii) Are all taps, valves, showers,

wash basins, sinks working
properly and there are no
chocking / leakage ?
Yes/No
(iv) Are flushing cisterns

correctly fitted and work
properly ?
(If no, indicate location
number and action to set
right) Yes/No
(v) Are water seals in water

closets and floor taps properly
working ?
number and action to be
taken) Yes/No
(vi) Are W.C. Pans, wash basins

and sinks free of
crack/breakage ?
(If no indicate location &
number to be replaced) Yes/No
8. Electrical Fittings
(i) Are the following working
properly ?
(a) Switches Yes/No

M-15
Follow
Type of Details
(b) Plug points Yes/No
(c) Fans Yes/No
(d) Regulators Yes/No
(e) Meter Yes/No

(If no, indicate location &
number to be
set right )
(ii) Are all the fuses wired

properly ? Yes/No
number to be
set right)
(iii) Is the earth-wire connected

properly ? Yes/No
taken)
B- Outside Building
(i) Is the surrounding free of
debris cleaned and Levelled.
taken) Yes/No
(ii) Is the compound wall and

gate provided ? Yes/No
(iii) Is the approach road properly

laid ? Yes/No
taken)
(iv) Are the outside drains
provided & clear ? Yes/No
(v) Are the steps & staircase

provided & to proper slope ? Yes/No
(vi) Is the outside building

finishing complete ? Yes/No
HANDED OVER TAKEN OVER

............................ ...........................
Signature of the Signature of the
Builder/Contractor. Engineering Subordinate, PWD
...................Section
M-16
...................Sub Dn.
...................Division
COUNTER SIGNED
( )
Signature of the Asstt. Engineer
..................Sub. Dn
.................Division
Copy submitted to the following for record and reference :-
1. The Executive Engineer, PWD ...........................................
2. The Asstt. Engineer, PWD ...............................................

( )
Engg. Subordinate
Part - II
(Inspection to be carried out during/after monsoon and well before expiry of maintenance-
guarantee period )
1. Building :
Are there any leakages/dampness in the following?
(i) Walls Yes/No
(ii) Floors Yes/No
(iii) Roofs Yes/No
(iv) Ceiling Yes/No
(v) Parapet Yes/No
(vi) Sunshades Yes/No

nature number
& action)
2. Service:
Are there any leakage in the following ?
(i) Rain Water Pipe Yes/No
(ii) Sewer Pipe Yes/No

M-17
(iii) Water Pipe. Yes/No
B. Is the whole system Yes/No

working leak proof ?
C. Are the following

working satisfactorily ?
(i) Septic Tank Yes/No
(ii) Soak Pit Yes/No
(iii) Outside drain Yes/No
Assistant Engineer, PWD,

Sub Dn......................
Copy forwarded to the Executive Engineer, PWD ...............for reference and necessary action.
Copy forwarded to the Engg. Subordinate, PWD ......................... for early action.
Assistant Engineer : PWD

Sub Dn........................
M-18
OFFICE OF THE CHIEF ENGINEER (B & R), PWD, RAJASTHAN, JAIPUR
STANDING ORDER No. 138
PURCHASE OF BUILDINGS
This department is charged with the duty of expressing opinion in connection with the
purchase of the buildings with a view to deal with such cases in a uniform and a correct way
be followed :-
(i) No building may be purchased for public purpose without the order of the
Government.
(ii) The valuation of building sites and of buildings should be made in accordance with
the following procedure :-
Valuation of Buildings :
The buildings may be divided in four categories :
1. Permanent (with life 80 to 100 years).
2. Permanent (with inferior specification 60 to 80 years)
3. Semi-permanent (with life 50 to 60 years)
4. Temporary (with life 10 years of less)
The cost of building should first be worked out on the present day rates by preparation of
detailed sample estimates for representative portion of the building and then calculating the
building or portion thereof with similar characters, the estimates will be exclusive of services
viz. electric, water and sanitary fittings and cost of land.
After valuating the present day cost of the building the depreciated cost should be calculated
with the formula :-
rd
D = P { 1 - ------ }n
100
Where D is the depreciated value.
P is the cost of present market rate.
rd is the fixed percentage of depreciation.
n is number of years of the building has been constructed.
The following may be assumed as life span of the various type of buildings :
(1) Buildings built of stone in lime masonry walls or bricks in lime masonry.
Stone slabs or RCC roof cement concrete of flag stone flooring and teak
wood joinery work. Life 80 to 100 years,
M-19
(2) Building of slightly inferior specification such to as stone partly in lime
mortar partly in mud or bricks in lime, masonry plastered walls, stone slabs
roofing or terraced roofing on flag stone with ordinary cement or lime terrace
and rough flag stone flooring and second class teak wood or other good
quality timber joinery. Life 60 to 80 years,
(3) Building of semi permanent nature such as built partly of brick in lime
mortar and partly built in mud mortar, wooden or A.C. or C.G.I sheet
roofing, country wood joinery. Life 50 to 60 years
(4) Temporary building such as buildings in mud mortar, inferior specifications

or structure with thatches. Life 10 year or less
The Executive Engineer should exercise his judgment carefully to decide as to which
category the building in question belongs and to estimate the actual life with in the category.
The rate of depreciation may be taken as –
100/life span of each category.
The amount of depreciation shall in no case be less than 10% of the present cost of the
buildings, irrespective of the age.
The valuation arrived at will be exclusive of the cost of land water supply, electric and
sanitary and other permanent fitting etc. and will apply to those buildings only which have
been properly maintained.
If the repairs have been neglected in the past and the present conditions is bad or dilapidated
suitable deductions should be made from the value as deducted above, for the neglected
repairs not for ordinary repairs).
The present value of land and water supply, sanitary and electric fittings etc. should be added
to the valuation of the buildings so arrived at the total valuation of the property the present
value of land will be determined in consolation with the local revenue authorities.
A lump-sum amount may further be deducted representing such damages as may exist but
which do not effect the life of the building.
If necessary, a further lump-sum representing the value of such features which exist and
which have been included in the plinth area valuation but which represent no value to the
Govt. (i.e. exceptionally thick wall unnecessary decoration and the like) may be deducted.
In case of sub-standard work, suitable reduction to account for inferior specification may be
made by the Executive Engineer.
Valuation on plinth area basis :
Cases may also exist where it is not possible to estimate correctly the quality of different
class of work under the above noted sub-heads for want of estimate of the works and its
drawing according to which the work has actually executed. In such case, it would be
possible to work out the valuation on the basis of plinth area rate of buildings. In doing so,
the plinth area of a building should be ascertained & the present day cost construction of
building of similar size & specification estimated at plinth area, rates, from the figure so
arrived at the deduction due to depreciation, related repairs & other items, may be made.
M-20
VALUATION ON MONTHLY RENTAL OR MARKET VALUE BASIS
It some time happens that valuation worked out on either of the above two methods is
apparently neither that of market value nor of the buildings in the locality. In such cases
therefore the valuation has to be assessed depending on.
(i) Present monthly rent of the buildings.
(ii) If buildings is not rented one, then on its face market value that can be
ascertained.
The valuation on the basis of rent would be 200 items the rent per month of the building
exclusive of houses tax, if any.
For the second alternative of market of face value no hard and fast rules can be laid down as
it will depend on the locality in which the building has been constructed, the purpose for
which it was built and the purpose for which it could be utilized in the locality.
The market value may be defined as the price which will be received by a willing seller from
the willing buyer in the open market for the particular property in its present condition with
its particular advantage and its particular draw backs. It is not the same as the cost; nor
marketed value be compared with the cost of rent statement. It can not be determined by the
extreme prices in a rising or falling market in all cases, the volume of transactions and the
general trend of price should be considered.
Before any building is purchased, the total present and future liabilities to Govt. should be
determined and the probable cost in the following items be clearly shown :
(1) Any necessary dismantling of existing structure, and cleaning of site.
(2) The special repairs of additional new work required to make the building
suitable for its future use and.
(3) Future annual maintenance.
The cost of (1) and (2) added to the proposed purchase price of the building, gives the
total cost of acquision while (3) given the recurring liability.
Sale Deed
When the approval of the Govt. to the proposed purchase has been accorded the Executive
Engineer, will prepare a site plan in triplicate and draft sale deed in proper form in
consulation with the Collector and send it through the Superintending Engineer to the Chief
Engineer. The Chief Engineer, will forward it to the Administrative Department in the
Secretariat to have it approved from the legal remembrance, after this, the draft Sale Deed
with plan will be returned, the signature of the vendor on the deed and on one copy of the site
plan obtained and have the deed registered after signing it on behalf of the Govt.
M-21
The Collector will have registered title deed with the site plan recorded in safe custody with
the Treasury Officer, inform the Executive Engineer accordingly and send him a copy of the
deed and plan. The third copy of the deed and plan will be sent by the Collectorate to the
Administrative Department concerned in the secretariat.
The Executive Engineer will maintain the register of such purchase of building in division in
the form vide Appendix ‘A’.
Sd/-
CHIEF ENGINEER, PWD,

Rajasthan, Jaipur.
No.F.9(10)8605/S/60 Dated : 17.2.1960

M-22
APPENDIX ‘A’
Register showing purchase of Building, Land etc.
No. & date of

Name of
Particular Date on Collector’s letter
treasury
S. of deed which the intimating the
where the Remarks
No. with deed was recording of the
deed is
amount registered deed with Treasury
recorded
M-23
STANDING ORDER No. 144
ASSESSMENT OF FAIR RENT OF BUILDINGS TAKEN ON RENT
BY VARIOUS DEPARTMETNS
It has been brought to the notice of the undersigned that the officers of the Department while
issuing FRC in respect of Building do not assess the reasonable area of the built up space
taken on Rent in accordance with the criteria laid down in the Govt. orders No.D.6274/F.
(15)GA/A/59 dated 18.05.59 (Copy enclosed for ready reference).
It may, therefore please be ensured before issuing such certificate in future that the space
being taken on rent by various Deptt. Is not is excess of space prescribed by the Govt.
D.2674/F.5(15) FA/A/59 dt. Jaipur 18.05.1959.
In order to ensure uniformity in the construction of new Govt. Building for office purpose and
for addition and alteration to the present Building and for taking private Building for office
purpose, the Governor is pleased to lay down the following scale for the same :
160 Sq.ft. Each for Gazetteer officers.
50 Sq. ft. Each for Technical Staff (such as Draftsmen & Estimaters).
40 Sq. ft Each for ministerial staff, Staff, Supdt. Head Clerk etc.
In addition 10% of accommodation allowed for ministerial staff will be admissible for
records.
M-24
STANDING ORDER No. X-3/73/77/79/81
1. For determining the present day value of the buildings with a view to assess the Rent
of the residential/other ordinary buildings required to be hired by the Govt.
Department and the standard rent of Govt. buildings, rented to Central Govt./State
Govt./other officers and Private parties, the following rules shall henceforth be
observed. These rules are meant for use by the PWD ( B & R), Rajasthan.
2. This order supercedes, the Standing Order No. 151 & 160 issued earlier. The market
value of building for the purpose of sale or purchase of the property shall be
determined as per instructions contained in Standing Order No. 138.
3. As the rates of construction on plinth area basis differ from circle to circle the plinth
area rates per sqm. given below are for Jaipur, Bikaner, Sri Ganganagar, Kota and
Udaipur circles. For Ajmer & Jodhpur these may be reduced by 10% and 20%
respectively in X3/73 and 5% & 15% respectively in X3 1977/79/81.
Plinth area rate in Rs.

Building Portion description
5/9/1973 1/1/1977 1/6/1979 1/2/1981
a. Basement floor upto 2.5 Sqm. 170 250 325 405
m. height.
b. Ground floor over Sqm. 180 280 350 435
basement
c. Ground floor without Sqm. 240 360 450 560
basement
d. First floor Sqm. 205 300 375 465
e. Second floor Sqm. 220 320 400 500
f. Add for third & fourth Sqm. 15 20 25 30
floor (for each floor)
g. Mezzanine floor Sqm. 70 100 125 150
h. Compound wall one Rmt. 30 45 60 75

meter high above ground
level including ordinary
gates
i. CGI/AC sheet shed Sqm. 170 250 310 385
closed on 3 sides with
pucca floor
j. Pucca Out Houses Sqm. 205 300 375 465

garages with shutters
k. Plat-form Sqm. 35 45 60 75
M-25
4 Electrical installation 5% 5% 5% 5%
without ceiling
fans.(percentage over
item 3 (a) to 3(j)]
(a) Add extra for conduit 1% 2% 2% 2%
wring
(b) Cost of ceiling fans to be

added extra as per
number of fans.
5 Sanitary percentage over 9% 10% 10% 10%
item 3(a) to 3 (f)
6 Water supply percentage 3% 4% 4% 4%

over item 3 (a) to 3 (f)
7 Roads
8 The above rates apply to
the building having :
(i) A ceiling height of 3.50

m.
(ii) Ordinary Cement Floor.
(iii) Wall Plastered on both
sides or pointed
externally.
(iv) Walls and pillar masonry
in lime or cement.
(v) First/Second class teak-
wood or solid core/flush
door and window
shutters with ordinary
iron fittings.
(vi) Ordinary electric wiring
with light & ordinary
power circuits and with
moderate fittings as per
norms fixed by PWD for
type design.
(vii) Good and adequate
sanitary fittings such as
Indian or English type
W.C. with flushing
cistern, wash basin,
towel rail, etc in each
bath room as per norms
fixed by PWD for type
design.
(viii) Stone slab roofing
without Beams/joists i.e.
upto 3 meters.
M-26
NOTE : For superior fittings such
as bath tubs, water
heaters, water tank etc.
as per actuals.
9 For other specifications
the following percentage
shall be added/reduced to
item 3(a) to 3(f) stated
above :
a. Increase/Decrease in 2.50% 2.50% 1.50% 1.50%
height above or below
3.5 meters by 30cms.
b. Add for mosaic flooring 5% 5% 5% 5%
with gray cement /
unpolished rough dressed
stone flooring.
c. Add for mosaic flooring 7.50% 7.50% 7.50% 7.50%

with white cement
d. Add for polished stone 10% 10% 10% 10%
flooring.
e Add for high class finish 5% 8% 8% 8%
with rich specification
f. Less for lime floor 1.50% x x X
instead of cement floor
g. Add extra for first class X 5% 5% 5%
select grade teak wood
frame with teak facing
ply flush door polished.
h. Add for wire gauge 3% 3% 3% 3%

doors & windows.
i. Less for poor finish. 5% 5% 5% 5%
j. Add for RCC roof with 5% X X X
lime terracing for spans
upto 3 m
k Add for RCC roof with
lime terracing/ stone slab
roofing with RSJ or
beams (actual percentage 8% to 8% to 8% to 8% to
to be determined by 15% 15% 15%
working out a sample
15%
estimate).
M-27
l. Add for item e.g. hot &    

cold water system
expensive fixtures and
fittings, glazed tiles and
facilities to over and
above those specified X   
about as per actual
estimate.
m. Add also for lawns

hedges etc. maintained.
10. If there are any variations in the above specifications then percentage to be added or
reduced, should be worked out proportionately.
11. After valuation of the present day cost of the building as thought it is new, the
depreciated cost should be calculated by the formula given below :
rd
D = P [ 1- ------]n
100
Where
D = Depreciated Value
rd = The fixed percentage of depreciation
P = The cost at the present market rate.
n = The number of years the building had been constructed.
12. The following may be assumed as the life span of the various type of buildings :
a. Building built of stone in lime masonry walls or brick in lime masonry, stone
slab or RCC roof, cement concrete or stone flag flooring and teak wood
joinery. Life 80 to 100 years
b. Building of slightly inferior specifications such as stone in mud or bricks in

mud masonry, lime plastered walls, stone slab roofing or terraced roofing or
stone flags with ordinary or lime terrace and 2nd class teak wood or other
equivalent quality, and timber joinery. Life 60 to 80 years
c. Building of semi-permanent nature such as built partly of brick in lime mortar

and partly of brick in mud mortar, wooden joists or AC or CGI sheet roofing
and country wood joinery. Life 50 to 60 years
d. Temporary building such as building in mud mortar and inferior

specifications or structures with country tiles roof and thatch roof etc.
Life 10 years or less
M-28
13. (i) If the age of the building is known or can be ascertained through local
enquiry etc. the actual age of the building shall be taken subject to the
minimum, life span according to the type of construction.
(ii) The Executive Engineers should exercise their judgment carefully to decide
as to which category the building in question belongs and to estimate the
actual life within the category.
(iii) If the exact age of the building can not be ascertained, the approximate age
can be found out, then that age shall be adopted. If the age can not be found
out by any means, the same shall be assumed at 50 years.
14. The rate to depreciation be taken as (100/life span) for each category.
15. The cost of land should be worked out on the basis of rate obtained from or
prescribed by UIT, Municipality, or any other authority having jurisdiction on the
administration of land in that area (In case UIT, Municipality is unable to give current
land rate, the same may be obtained from land and building taxation department).
Land in excess of four times the built-up area of the building should not be counted
for determining the total cost of land and building unless the entire land is specifically
required.
16. For buildings more than one storey :
a. The cost of built-up land area shall be distributed in proportion to the built-up
area on individual floors.
b. The cost of open land shall be distributed in proportion to the actual use of
land by different tenants on individual floors.
c. The area under commercial use shall be given double weight-age of the area
under residential use.
17. The rent calculated is exclusive of taxes.

18. This order shall take immediate effect.
Sd/-
CHIEF ENGINEER,
PWD, RAJASTHN,
JAIPUR.
No. P.9(15)(A/Cell-VI)/73/6512 Dated: 5-9-73
D-4512 12-1-77
D-2453 6-6-79
D-296 2-1-81
Note: 9 (i) Deleted in S.O.x/3-1977 & in subsequent orders.

9 (f 1) Deleted in S.O. x/3-1977 & in subsequent orders.
9 (f2) Added in S.O. x/3-1977 & in subsequent orders.
9 (k 1) Added in S.O. x/3-1977 & in subsequent orders.
13 (i) & (ii) Added in S.O. x/3-1979 & in subsequent orders.
15 with in ( )-do- x-3-1981.
16 (c) Added in S.O. –do- x3/-1979.
M-29
STANDING ORDER No. X-3/1984
1. For determining the present day value of the buildings with a view to assess the fair
rent of the residential/other ordinary buildings required to be hired by the Govt.
Department and the standard rent of Govt. buildings rented to Central Govt./State
observed. These rules are meant for use by the PWD (B & R), Rajasthan.
2. This order supersedes, the Standing Order No. 151,X-3/1977/ X-3/1979 & X-3/1981
issued earlier. The market value of building for the purpose of the sale of purchase of
the property shall be determined as per instructions contained in Standing Order
No. 138.
3. The circular may be adopted for valuation of properties except for the purpose of sale
and purchase of buildings by Govt. of Rajasthan for which Standing Order No. 138
shall continue to be applied.
Plinth area rate in

Building Portion-description
rupees
a. Basement floor upto 2.5 m. height 525.00 per Sq.M.
b. Ground floor over basement 565.00per Sq.M.
c. Ground floor without basement 725.00 per Sq.M.
d. First floor 600.00 per Sq.M.
e. Second floor 650.00 per Sq.M.
f. Add for third & fourth floor 40.00 (for each floor)
g. Mezzanine floor 200.00 per Sq.M.
h. Compound wall one meter high above 95.00 per Sq.M.

ground level including ordinary gates
i. CGI/AC sheet closed on 3 sides 500.00 per Sq.M.

with pucca floor
j. Pucca Out Houses and garage 600.00 per Sq.M.

with shutters
k. Platform 100.00 per Sq.M.
l. For Antitermite treatment 15.00 per Sq.M.
m. For mastic asphalt water proofing treatment

of foundations (on ground floor area only) 110.00 per Sq.M.
M-30
4. Electrical installation without cleaning fans.
[percentage over item 3 (a) to (j)]
(a) Add extra for conduit wiring. 5%
(b) Cost of ceiling fans to be added extra as per 2%

number of fans.
5. Sanitary percentage over item 3(a) to 3(j) 10%

excepting item 3 (h)
6. Water supply percentage over item 3(a) to 4%

3(j) excepting item 3(h).
Note: For superior fittings such as bath tubs, water

heaters, water tank etc. as per actuals at
current BSR.
7. Roads At Current B.S.R.
8. The above rates apply to the building having:
(i) A ceiling height of 3.50.
(ii) Ordinary Cement Floor.
(iii) Wall Plastered on both sides or pointed

externally.
(iv) Walls and pillar masonry in lime or cement.
(v) First / Second class teak-wood or solid core /

flush door and window shutters with
ordinary iron fittings.
(vi) Ordinary electric wiring with light &

ordinary power circuits and with moderate
fittings as per norms fixed by P.W.D. for
type design.
(vii) Good and adequate sanitary fittings such as

Indian or English type W.C. with flushing
cistern, wash basin, towel rail, etc. in each
bath room as per norms fixed by P.W.D. for
type design.
(viii) Stone slab roofing without Beams/joists i.e.

upto 3 meters.
For RCC framed structures the following

rates shall be applicable in place of rates of
at (3 meters ht.) 3(a) to 3(f)
(a) Basement floor (3 meters ht.) Rs. 1350/- per sqm.
(b) Ground floor (3 meter ht.) over basement

M-31
Rs. 1000/- per sqm.
(c) Ground floor in buildings with out basement

(3 meter ht.) Rs. 1050/- per sqm.
(d) First floor (3 meter ht.) Rs. 1050/- per sqm.
(e) Add extra for Second & every subsequent

floor (3 meter ht.) over rate of item 9 (d).
Rs. 50/- per sqm.
10. For other specifications the following

percentage shall be added/reduced to item
3(a) to 3(j) stated above :
a. Increase/Decrease in height above or below 1.5%
3.5 meters by 30 cms.
b. Add for mosaic flooring with gray 5%

cement/unpolished rough dressed stone
flooring.
c. Add for mosaic flooring with white cement. 7.5%
d. Add for the polished stone flooring. 10%
e. Add for high-class finish with rich 8%

specification.
f. Add extra for first class selected grade teak 5%

wood frame with teak facing ply flush door
polished.
g. Add for wire gauge doors & windows. 3%
h. Less for poor finish. 5%
i. Add for RCC roof with lime terracing/stone

slab roofing with RSJ or beams (actual
percentage to be determined by working out
a sample estimate in case of load bearing
structures only) 8% to 15%.
j. Add for items e.g. hot & cold water system

expensive fixtures and fittings, glazed tiles
built earbobs & other built in in furniture,
marble slabs and any other item or facilities
not covered in the items specified above as
per actual estimate.
k. Add also for lawns etc. maintained as per

actual estimate.
M-32
12. After valuation of the present day cost of the building as though it is new, the
D = P (1 - rd/100)n
Where -
rd = The fixed percentage for depreciation.
13. The following may be assumed as the life span of various type of building :-
a. Building built of stone in lime masonry walls or brick in lime masonry, stone
slab or RCC roof, cement concrete or stone flag flooring and teak wood
joinery. Life 80 to 100 years

c. Building of semi-permanent nature such as built partly or brick in lime mortar

and partly of brick in mud mortar, wooden joints or AC or CGI sheet roofing
d. Temporary building such as buildings in mud mortar and inferior

specifications or structures with country tiles roofs and thatch etc.
minimum, life span according in the type of construction.
(ii) The Executive Engineers should exercise their judgment carefully to be

decide as to which category the building in question belongs and to estimate
the actual life within the category.
(iii) If the exact age of the building can not be ascertained by, the approximate
age can be found out, then that age shall be adopted. If the age can not be
found out by any means, the same shall be assumed as 50 years.
15. The rate to depreciation be taken as (100/life span) for each category.
administration of land in that area. Land in excess of four times the built-up area of
the building should not be counted for determining the total cost of land and building
unless the entire land is specifically required.
M-33
"In case UIT/Municipality is unable to give current land rate, the same may be
obtained from land and building taxation department)"
17. For buildings more than one storey :
18. The rent calculated is exclusive of taxes, is to be borne by the owner.
19. This order shall come in to force with immediate effect.
Sd/-
(M.M. SWAROOP)
CHIEF ENGINEER, PWD
RAJASTHAN, JAIPUR
Dated : 23rd July, 1984.

M-34
Rent of the residential/other ordinary buildings required to be hired by the Govt.
2. This order supersedes, the Standing Order No. 151, 160, X-3/1973/ X-3/1979 & X-
3/1981, X-3/1984 & X-3/1987 issued earlier. The market value of building for the
purpose of the sale or purchase property shall be determined as per instructions
contained in Standing Order No. 138.
Plinth area rate in

rupees
a. Basement floor upto 2.5 m. height 600.00 per Sqm.
b. Ground floor over basement 650.00per Sqm.
c. Ground floor without basement 850.00 per SqM.
d. First floor 710.00 per Sqm.
e. Second floor 770.00 per Sqm.
f. Add for third & fourth floor 45.00 per sqm.

(for each floor)
g. Mezzanine floor 220.00 per Sqm.
h. Compound wall one meter high above ground

level including ordinary gates 125.00 per Sqm.
i. CGI/AC sheet closed on 3 sides

with pucca floor 550.00 per Sqm.
j. Pucca Out Houses and garage

with shutters 650.00 per Sqm.
k. Platform 120.00 per Sqm.
l. For antitermite treatment 15/- per Sqm.
m. For mastic asphalt water proofing treatment of

M-35
foundation s (on ground floor area only) 110/- per Sqm.
4. Electric installation without

ceiling fans.
%age over item %age over item no.
No. 3 (a) to 3(j) 9(a) to (9e) for
for wall bearing RCC framed
structures structures.
(a) Add extra for conduit wiring 5% 3%
(b) Cost of ceiling fans to be added

extra as per number of fans. 2% 1.25%
5. Sanitary Fittings 10% 6%
6. Water Supply 4% 2.5%
7. Roads
8. The above apply to the building having :
(i) A ceiling height of 3.50 m. (wall bearing structures) 3.00m. framed

structures.
(ii) Wall Plastered on both sides or pointed externally.
(iii) Ordinary Cement Floor.
(v) Second class teak-wood or solid core/flush door and window shutters with
ordinary iron fittings and with ordinary paint.
(vi) Ordinary electric wiring with light & ordinary power circuits and with
moderate fittings.
(vii) Good and adequate sanitary fittings such as Indian or English type W.C. with
flushing cistern, wash basin, towel rail, etc. in each bath room as per norms
fixed by P.W.D. for type design including septic tank soak pit and sewer line
within campus.
(viii) Stone slab roofing without Beams/joists i.e. upto 3 metres for wall bearing
structures.
9. For RCC farmed structure the following rates shall be applicable in place of
rates at 3(a) to 3(f)
a Basement floor (3 mtr. ceiling 1500/- per sqm.

height)
b Ground floor (3 mtr. height) 1100/- per sqm.

over basement.
M-36
c. Ground floor in buildings 1150/- per sqm.
without basement (3 mtr.
height)
d First floor (3 mtr. height) 1100/- per sqm.
e Add extra for second & every

subsequent floors (3 mtr. ht.) 55/- per sqm.
over rate of item 4 (d)
10. For other specifications the following percentage shall be added/reduced in item 3(a)
to 3(j) and 4(b) to 4(e) stated above :
%age over item %age over item No.

Details of Specifications No. 3(a) to (j) & 4(a) & 4(c) for RCC
4(b), 4(d) & 4(e) framed structure
a Increase/Decrease by every
30cms. in height above or
below. 1.5% 1%
b Add for mosaic flooring with

gray cement or that of
stone flooring in place of
C.C. floor. 5% 3%
c Add for mosaic flooring with

white cement flooring 7.5% 5%
d. Add for fine polished stone

flooring. 10% 6%
e. Add for high-class finish

with rich specifications and
good condition off
maintenance 8% 4.75%
f. Add extra for first

class/selected grade teak
wood frame with teak facing
ply flush door polished. 5% 3%
g. Add for wire gauge doors &

windows. 3% 1.75%
h. Less for poor finish. 7 to 10% 7 to 10%
i. Add for RCC roof with lime

terracing, stone slab roofing
with RSJ or Beams (actual
percentage to be determined
by working out a bearing
structures only). 8 to 15%
j. Add for items e.g. hot & cold

M-37
water system expensive
fixtures and fittings, glazed
tiles, built in furniture,
marble slabs and any other
item or facilities not covered
in the item specified above
as per actual estimate.
k. Add also for lawns etc.

maintained as per actual.
Rd
D = P (1 - ---- )n
100
Where -
a. RCC framed buildings, buildings built of stone in lime masonry wall bricks
in lime masonry, stone slab or RCC roof, cement concrete or stone flag
flooring and teak wood joinery Life 80 to 100 years



M-38
maximum, life span according to the type of construction.
(ii) If the exact age of the building can not be ascertained but the approximate
(iii) The Executive Engineers should exercise their judgment carefully to be

15. The rate of depreciation be taken as:- (100/life span) for each category.
administration of land in that area. Land in excess of 4 times the built-up area of the
building should not be counted for determining the total cost of land and building
obtained from Land and Building Taxation Department or the Valuation Cell in the
Income Tax Department."
17. For buildings more than one storey the distribution of cost of land shall be made as
under :
18. Any taxes such as House tax, Land & Building taxes etc. is to be borne by the owner.
Sd/-
(M.C. SHARMA)
CHIEF ENGINEER, PWD
RAJASTHAN, JAIPUR
M-39
3/1981, X-3/1984 & X-3/1987 issued earlier. The market value of building for the
purpose of the sale or purchase property shall be determined as per instructions
contained in Standing Order No. 138.
Plinth area rate in

rupees

(for each floor)
h. Compound wall one meter high above ground

level including ordinary gates 200.00 per Sqm.
i. CGI/AC sheet closed on 3 sides 650.00 per Sqm.

with pucca floor

4. For RCC framed multistoried structures the

following rates shall be applicable in place of
rates at 3(a) to 3(f) :
a Basement floor (3 mtr. ceiling height) 2000/- per sqm.
M-40
b Ground floor ( 3 mtr. height) over basement. 1500/- per sqm.
c. Ground floor in buildings without basement (3 2100/- per sqm.

mtr. height)
e Add extra for second & every subsequent floors (3

mtr. ht.) over rate of item 4 (d) 75/- per sqm.
to 3(j) and 4(b) to 4(e) stated above :
%age over item %age over item No.

No. 3(a) to (j) & 4(a) & 4(c) for RCC
4(b), 4(d) & 4(e) framed structure
a Increase/Decrease by every
30cms. in height above or
below 1.5% 1%

stone flooring in place of
C.C. floor. 5% 3%

white cement flooring 7.5% 5%
d. Add for fine polished stone (As per difference in rates in prevailing
flooring. B.S.R.)
(Actual area to be measured)
e. Add for high-class finish

with rich specifications and
good condition off
maintenance 8% 5%
f. Add extra for first

class/selected grade teak
wood frame with teak facing 3%
ply flush door polished. 5% (on item No.4-c only)
g. Add for wire gauge doors & 2%

windows. 3% (on item No.4-c only)
i. Add for items e.g. hot & cold

water system expensive
fixtures and fittings, glazed
tiles, built in furniture,
marble slabs and any other
item or facilities not covered
in the item specified above
M-41
as per actual estimate.
j. Add also for lawns etc.

maintained as per actual.
k. Electrical installation
without cleaning fans. 5% 3.5%
a. Add extra for conduit wiring. 2% 1.5%
b. Cost of ceiling fans to be

added extra as per number of
fans.
l. Sanitary Fittings (except 7%
10%
item 3h) (item No. 4-c only)
m. Water supply (except item 3%

4%
3h) (item No.4-c only)
Note : For superior fittings such as bath tubs, water heaters etc. as per actual at current BSR.
7. The above rates apply to the building having :
(i) A ceiling height of 3.20 m. (wall bearing structures)/ 3.00 m. framed

structures.
(ii) Wall Plastered on both sides or pointed externally.
(iii) Ordinary Cement Floor.
ordinary iron fittings and with ordinary paint.
moderate fittings.
fixed by P.W.D. for type design including septic tank soak pit and sewer line
within campus.
(viii) Stone slab roofing/R.C.C. slab roofing with Beams or joists.
M-42
Rd
D = P (1 - ---- )n
100
Where -
a. RCC framed buildings, buildings built of stone in lime masonry wall bricks
flooring and teak wood joinery Life 80 to 100 years



maximum, life span according to the type of construction.
(iii) The Executive Engineers should exercise their judgment carefully to be

12. The rate of depreciation be taken as:- (100/life span) for each category.
administration of land in that area. Land in excess of 4 times the built-up area of the
building should not be counted for determining the total cost of land and building
M-43
obtained from Land and Building Taxation Department or the Valuation Cell in the
Income Tax Department."
under :
15. Any taxes such as House tax, Land & Building taxes etc. is to be borne by the owner.
Sd/-
(M.C. SHARMA)
CHIEF ENGINEER, PWD
RAJASTHAN, JAIPUR
M-44
observed. These rules are meant for use by the PWD, Rajasthan.
3/1981, X-3/1984, X-3/1987 & X-3/1990 issued earlier. The market value of building
for the purpose of the sale or purchase property shall be determined as per
instructions contained in Standing Order No. 138.
Building Portion-description Plinth area rate in rupees

f. Add for third & fourth floor 100.00 each floor
h. Compound wall one meter high above

ground level including ordinary gates 300.00 per Sqm.

with pucca floor


M-45
4. For RCC framed multistoried structures the following rates shall be applicable in
place of rates at 3(a) to 3(f) :
b Ground floor ( 3 mtr. height) over 2100/- per sqm.

basement.
c. Ground floor in buildings without 2950/- per sqm.

basement (3 mtr. height)
e Add extra for second & every subsequent

floors (3 mtr. ht.) over rate of item 4 (d)
100/- per sqm
to 3(j) and 4(a) to 4(e) stated above :
Item 3(a) to 3(j) Item No. 4

Details of Specifications and No. 4 (b), (a) and
4(e) & 4(d) 4(c)
a Increase/Decrease by every 30 cms.
in height above or below 1.5% 1%
b Add for mosaic flooring with gray

cement or that of unpolished rough
dressed stone flooring in place of
C.C. floor. 5% 3%
c Add for mosaic flooring with white

cement 7.5% 5%

flooring/marble flooring (As per difference in rates in
prevailing B.S.R.)
e. Add for high-class finish with rich

specifications and good condition off upto 10%
maintenance (Analysis to
be worked
upto 15% out)
f. Add extra for first class/selected

grade teak wood frame with teak 7%
facing ply flush door polished. 10%

windows & safety bars. 3%
M-46
h. Less for poor finish. 5 to 10%
(Analysis to
be worked
5 to 10% out)
i. Add for items e.g. hot & cold water

system expensive fixtures and
fittings, glazed tiles, built in
furniture, marble slabs and any other
item or facilities not covered in the
item specified above as per actual (As per
estimate. actual
estimate)
j. Add also for lawns hedges etc. Rs. 25/- Rs. 25/-
maintained. per Sqm. per Sqm.
k. Electrical installation without ceiling

fans. 5% 3.5%
(a) Add extra for conduit wiring 2% 1.5%
(b) Cost of ceiling fans to be added extra

as per number of fans
l. Sanitary Fittings (except item 3(h)
& 3(k) 10% 7%
m. Water supply (except item 3(h)

& 3(k) 4% 3%
n. External cladding (As per

actual)
o. Fire fighting system. (As per

actual)
Note :- For superior fittings such as bath tubs, water heaters etc. as per actual.
(i) A ceiling height of 3.20 m. (wall bearing structures) 3.00 M framed

structures.
(ii) Wall plastered on both sides and pointed externally.
(iii) Ordinary cement floor.
ordinary iron fittings and ordinary paint.
M-47
moderate fittings.
fixed by P.W.D. for type design including septic tank, soak pit and sewer
lines with in the campus.
(viii) Stone slab roofing/RCC slab roofing with Beams or joists.
9. After valuation of the present day cost of the building as though it is now, the
Where -
D = P (1 - rd/100)n
a RCC framed buildings, building built of stone in lime masonry walls or brick
flooring and teak wood joinery. Life 80 to 100 years
b Buildings of slightly inferior specifications such as stone in mud or bricks in

c Building of semi-permanent nature such as built partly of brick in lime mortar

d Temporary building such as buildings in mud mortar and inferior

specifications or structures with country tiles roof and thatch etc.
Life 10 years or less.
maximum life span according in the type of construction.
M-48
(iii) The Executive Engineers should exercise their judgment carefully to decide
12. The rate to depreciation be taken as : 00/life span for each category.
13. The cost of land should be worked out by a committed consisting of the concerning
S.E., T.A. to SE and Executive Engineer(s) after considering the rates obtained from
UIT/ Municipality/Registration Deptt./any other authority having jurisdiction on the
administration of land in that area. The committee should exercise its discretion
carefully, taking all the facts like importance of the place etc. into consideration land
in excess of four times the built-up area of the building should not be counted for
determining the total cost of land and building unless the entire land is specifically
required.
under :
a The cost of built-up land area shall be distributed in proportion to the built-up
b The cost of open land shall be distributed in proportion to the actual use of
c The area under commercial use shall be given double weight-age of the area
15. Any taxes such as House tax, Land & Building taxes etc. is to be borne by the owner
16. This order shall come in force with immediate effect 1-1-1993 and will not effect the
cases assessed in the past.
Sd/-
(HARBINDER SINGH)
CHIEF ENGINEER, PWD
M-49
1. For determining the present day value of the buildings with a view to assess the Fair
3/1981, X-3/1984, X-3/1987 & X-3/1990, X-3/1993 issued earlier. The market value
of building for the purpose of the sale or purchase of the property shall be determined
as per instructions contained in Standing Order No. 138.
and purchase of buildings by Govt. of Rajasthan for which, Standing Order No. 138


ground level including ordinary gates 350.00 per RMT

with pucca floor

k. Plat-form 230.00 per Sqm.

M-50
a Basement floor (3 mtr. ceiling

height) 2800/- per sqm.
b Ground floor ( 3 mtr. height)

over basement. 2100/- per sqm.
c. Ground floor in buildings

without basement (3 mtr. height) 2950/- per sqm.
e. Add extra for second & every

subsequent floors (3 mtr. ht.)
over rate of item 4 (d) 100/- per sqm.
a Increase/Decrease by every 30
cms. in height above or below 1.5% 1%

unpolished rough dressed stone
flooring in place of C.C. floor. 5% 3%

white cement. 7.5% 5%

flooring/ marble flooring. (As per difference in prevailing B.S.R.)
e. Add for high-class finish with

rich specifications and good Upto 10%
condition off maintenance (Analysis to be
upto 15% worked out)



(Analysis to be
5 to 10% worked out)
M-51
water system expensive fixtures
and fittings, glazed tiles, built in
furniture, marble slabs and any
other item or facilities not
covered in the item specified (As per actual
above. estimate)
k. Electrical installation without

ceiling fans. 5% 3.5%

extra as per number of fans.
l. Sanitary fittings (except item

3(h) & 3 (k) 10% 7%

& 3(k) 4% 3%
n. External cladding (As per actual)
o. Fire fighting system. (As per actual)
Note : For superior fittings such as bath tubs, water heaters etc. as per actual.
(i) A ceiling height of 3.50 m. (wall bearing structures/ 3.00 M framed

structures)
moderate fittings.
M-52
Where -
D = P (1 - rd/100)n
flooring and teak wood joinery.
b. Buildings of slightly inferior specifications such as stone in mud or bricks in



found out by found out by any means, the same shall be assumed as 50 years.
actual ife within the category.
12. The rate to depreciation be taken as : 100/Life span for each category.
M-53
13. The cost of land should be worked out by a committee consisting of the concerning
UIT/ Municipality/Registration Deptt./any other authority having jurisdiction or the
required.
under :
16. This order shall come in force with immediate effect from 1-1-1993 and will not
effect the cases assessed in the past.
Sd/-
(A.K. JAIN)
CHIEF ENGINEER, PWD
M-54
1. For determining the present day value of the buildings with a view to assess the Fair
3/1981, X-3/1984, X-3/1987 and X-3/1990, X-3/1993, X-3/1995 issued earlier. The
market value of building for the purpose of the sale or purchase of property shall be
determined as per instructions contained in Standing Order No. 138.
and purchase of buildings by Govt. of Rajasthan for which, Standing Order No. 138

a. Basement floor upto 2.5 m. height 1560/- per Sqm.
b. Ground floor over basement 1750/- per Sqm.
c. Ground floor without basement 2070/- per SqM.
d. First floor 1840/- per Sqm.
e. Second floor 1885/- per Sqm.
f. Add for third & fourth floor 130/- each floor
g. Mezzanine floor 460/- per Sqm.

ground level including ordinary gates 400/- Rmt.
i. CGI/AC sheet closed on 3 sides 1150/- per Sqm.

with pucca floor

with shutters 1435/- per Sqm.
k. Plat-form 265/- per Sqm.

M-55
a Basement floor (3 mtr. ceiling

height) 3220/- per sqm.
b Ground floor (3 mtr. height) over

basement. 2415/- per sqm.
c. Ground floor in buildings without

basement (3 mtr. height) 3390/- per sqm.
e. Add extra for second & every

subsequent floors (3 mtr. ht.) over
rate of item 4 (d) 115/- per sqm.
a Increase/Decrease by every 30cms.

in height above or below 1.5% 1%

cement or that of unpolished rough
C.C. floor. 5% 3%
c Add for mosaic flooring with white

cement. 7.5% 5%
d. Add for fine polished stone flooring/ (As per difference in prevailing
marble flooring. B.S.R.)
e. Add for high-class finish with rich

specifications and good condition off Upto 10%
maintenance (Analysis to be
Upto 15% worked out)



(Analysis to be
5 to 10% worked out)
M-56
i. Add for items e.g. hot & cold water
system expensive fixtures and
fittings, glazed tiles, built in
furniture, marble slabs and any other
item or facilities not covered in the (As per actual
item specified above. estimate)
k. Electrical installation without ceiling

fans. 5% 3.5%
(b) Cost of ceiling fans to be added extra

as per number of fans.
l. Sanitary fittings (except item 3(h)

& 3 (k) 10% 7%

& 3(k) 4% 3%
n. External cladding (As per actual)
o. Fire fighting system. (As per actual)
(i) A ceiling height of 3.20 m. (wall bearing structures/ 3.00 M framed

structures)
(v) Second class teak-wood of solid core/flush door and window shutters with
moderate fittings.
M-57
Where -
D = P (1 - rd/100)n
flooring and teak wood joinery.
b. Buildings of slightly inferior specifications such as stone in mud or bricks in



12. The rate to depreciation be taken as : 100/Life span for each category.
13. The cost of land should be worked out by a committee consisting of the concerning
M-58
UIT/ Municipality/Registration Deptt./any other authority having jurisdiction or the
required.
under :
16. This order shall come in force with immediate effect from 1-4-1997 and will not
effect the cases assessed in the past.
Sd/-
(H.N. SAXENA)
CHIEF ENGINEER, PWD
M-59
1. For determining the present day value of the buildings with a view to
assess the Fair Rent of the residential/other ordinary buildings required
to be hired by the Govt. Department and the standard rent of Govt.
buildings rented to Central Govt./State Govt./other officers and Private
parties, the following rules shall henceforth be observed. These rules are
meant for use by the PWD, Rajasthan.
2. This order supersedes, the Standing Order No. 151, 160, X-3/1973, X-
3/1979, X-3/1981, X-3/1984, X-3/1987, X-3/1990, X-3/1993, X-3/1995
& X-3/1997 issued earlier. The market value of building for the purpose
of the sale or purchase of property shall be determined as per
instructions contained in Standing Order No. 138.
3. The circular may be adopted for valuation of properties except for the
purpose of sale and purchase of buildings by Govt. of Rajasthan for
which, Standing Order No. 138 shall continue to be applied.
1 For masonry Structures:-
Plinth area rate

S.NO. Building Portion-description
(in Rs.)
a. Basement floor upto 2.5 m. height 2450/- per Sqm.
b. Ground floor over basement 2850/- per Sqm.
c. Ground floor without basement 3400/- per Sqm.
d. First floor 3000/- per Sqm.
e. Second floor 3100/- per Sqm.
f. Add for third & fourth floor 210/- each floor
g. Mezzanine floor 750/- per Sqm.

M-60
Plinth area rate

S.NO. Building Portion-description
(in Rs.)
h. Compound wall one meter high above 650/- Rmt.
ground level including ordinary gates
i. CGI/AC sheet closed on 3 sides 1800/- per Sqm.
with pucca floor
j. Pucca Out Houses and garage 2350/- per Sqm.
with shutters
k. Plat-form 400/- per Sqm.
4. For RCC framed multistoried structures the following rates shall be

applicable in place of rates at 3(a) to 3(f):
b Ground floor (3 mtr. height) over 3300/- per sqm.

basement.
c. Ground floor in buildings without 4000/- per sqm.

basement (3 mtr. height)
e. Add extra for second & every 190/- per sqm.

subsequent floors (3 mtr. ht.) over rate
of item 4 (d)
5 For other specifications the following percentage shall be added/reduced

in item 3(a) to 3(j) and 4(a) to 4(e) stated above :
RCC
S. For masonry
Building Portion/ Description framed
No. structures
structures
a Increase/Decrease by every 30cms. 1.5% 1%
in height above or below

cement or that of unpolished rough 5% 3%
C.C. floor.
M-61
RCC
S.N For masonry
o. structures
structures
c Add for mosaic flooring with 7.5% 5%
white cement.
d. Add for fine polished stone (As per difference in

flooring/ marble flooring. prevailing B.S.R.)
e. Add for high-class finish with rich Upto 15% Upto 10%
specifications and good condition (Analysis to
off maintenance be worked
out)
grade teak wood frame with teak 10% 7%
facing ply flush door polished.
g. Add for wire gauge doors & 3% 2%

windows & safety bars.

(Analysis to
be worked
out)
water system expensive fixtures (As per (As per
and fittings, glazed tiles, built in actual actual
furniture, marble slabs and any estimate) estimate)
other item or facilities not covered
in the item specified above.
k. Electrical installation without 5% 3.5%

ceiling fans.

extra as per number of fans.
l. Sanitary fittings (except item 3(h) 10% 7%

& 3 (k)
M-62
RCC
S.N For masonry
o. structures
structures
m. Water supply (except item 3(h) 4% 3%
& 3(k)
n. External cladding (As per actual (As per

Estimate) actual)
o. Fire fighting system. (As per actual (As per
Estimate) actual)
(i) A ceiling height of 3.20 m. (wall bearing structures/ 3.00 M

framed structures)
(v) Second class teak-wood of solid core/flush door and window

shutters with ordinary iron fittings and ordinary paint.
(vi) Ordinary electric wiring with light & ordinary power circuits and
with moderate fittings.
(vii) Good and adequate sanitary fittings such as Indian or English

type W.C. with flushing cistern, wash basin, towel rail, etc. in
each bath room as per norms fixed by P.W.D. for type design
including septic tank, soak pit and sewer lines with in the
campus.
8 If there are any variations in the above specifications then percentage to

be added or reduced, should be worked out proportionately.
M-63
9. After valuation of the present day cost of the building as though it is
now, the depreciated cost should be calculated by the formula given
below :
Where -
D = P (1 - rd/100)n
10. The following may be assumed as the life span of the various type of
buildings :
a RCC framed buildings, building built of stone in lime masonry

walls or brick in lime masonry, stone slab or RCC roof, cement
concrete or stone flag flooring and teak wood joinery.
Life 80 to 100 Years
b. Buildings of slightly inferior specifications such as stone in mud

or bricks in mud masonry, lime plastered walls, stone slab
roofing or terraced roofing or stone flags with ordinary or lime
terrace and 2nd class teak wood or other equivalent quality, and
timber joinery. Life 60 to 80 years
c Building of semi-permanent nature such as built partly of brick in

lime mortar and partly of brick in mud mortar, wooden joints or
AC or CGI sheet roofing and country wood joinery.
Life 50 to 60 years

11. (i) If the age of the building is known or can be

ascertained through local enquiry etc., the actual age of the building
shall be taken subject to the maximum life span according to the type
of construction.
(ii) If the exact age of the building can not be ascertained but the
approximate age can be found out, then that age shall be adopted.
M-64
If the age can not be found out by any means, the same shall be
assumed as 50 years.
(iii) The Executive Engineers should exercise their judgment carefully

to decide as to which category the building in question belongs
and to estimate the actual life within the category.
12. The rate of depreciation be taken as : 100/Life span for each category.
13. The cost of land should be worked out by a committee consisting of the
concerning S.E., T.A. to SE and Executive Engineer(s) after considering
the rates obtained from UIT/ Municipality/Registration Deptt./any other
authority having jurisdiction or the administration of land in that area.
The committee should exercise its discretion carefully, taking all the
facts like importance of the place etc. into consideration. Land in excess
of four times the built-up area of the building should not be counted for
determining the total cost of land and building, unless the entire land is
specifically required.
14. For buildings more than one storey the distribution of cost of land shall
be made as under :
a The cost of built-up land area shall be distributed in proportion to

the built-up area on individual floors.
b The cost of open land shall be distributed in proportion to the

actual use of land by different tenants on individual floors.
c The area under commercial use shall be given double weight-age

of the area under residential use.
15. Any taxes such as House tax, Land & Building tax etc., is to be borne by
the owner.
16. This order shall come in force with immediate effect from 24.4.2006 and
will not effect the cases assessed in the past.
-Sd-
(H.L. MINA)
CHIEF ENGINEER
PWD Raj. Jaipur
M-65
M-66
M-67
M-68
M-69
M-70
M-71
M-72
M-73
M-74
M-75
M-76
M-77
M-78
M-79
TABLE OF DEPRECIATED COST OF BUILDINGS
rd
D = P (1 - ---- )n
100
D= PxC
rd = RATE OF DEPRICATION
(a) Take rd 1% for lime and cement masonry.
(b) rd 2% for mud masonry.
n = Number of Years
P = Present Day Cost
D = Depreciated Cost.
Value of C Value of C
Number of Years Number of Year
rd 1 % rd 2 % rd 1 % rd 2 %
1 2 3 4 5 6
1. 0.9900 0.9800 51. 0.5965 0.3558
2. 0.9800 0.9603 52. 0.5905 0.3487
3. 0.9700 0.9410 53. 0.5845 0.3417
4. 0.9603 0.9221 54. 0.5786 0.3348
5. 0.9506 0.9036 55. 0.5720 0.3281
6. 0.9410 0.8855 56. 0.5670 0.3215
7. 0.9315 0.8678 57. 0.5613 0.3151
8. 0.9221 0.8502 58. 0.5556 0.3087
9. 0.9128 0.8333 59. 0.5500 0.3026
10. 0.9036 0.8166 60. 0.5445 0.2965
11. 0.8945 0.8002 61. 0.5391 0.2905
12. 0.8855 0.7841 62. 0.5335 0.2847
13. 0.8766 0.7624 63. 0.5282 0.2790
14. 0.8678 0.7520 64. 0.5229 0.2734
15. 0.8590 0.7379 65. 0.5176 0.2680
16. 0.8502 0.7237 66. 0.5124 0.2626
17. 0.8418 0.7086 67. 0.5072 0.2572
18. 0.8333 0.6944 68. 0.5021 0.2522
19. 0.8250 0.6805 69. 0.4971 0.2471
M-80
20. 0.8166 0.6668 70. 0.4920 0.2421
21. 0.8082 0.6534 71. 0.4871 0.2372
22. 0.8002 0.6403 72. 0.4821 0.2325
23. 0.7921 0.6275 73. 0.4773 0.2278
24. 0.7841 0.6149 74. 0.4725 0.2232
25. 0.7762 0.6026 75. 0.467 0.2288
26. 0.7674 0.5905 76. 0.4630 0.2144
27. 0.7607 0.5786 77. 0.4583 0.2101
28. 0.7520 0.560 78. 0.4537 0.2059
29. 0.7454 0.5556 79. 0.4491 0.2018
30. 0.7379 0.5445 80. 0.4446 0.1977
31. 0.7305 0.5335 81. 0.4401 0.1937
32. 0.7231 0.5229 82. 0.4357 0.1899
33. 0.7158 0.5124 83. 0.4313 0.1861
34. 0.7086 0.5021 84. 0.4270 0.1823
35. 0.015 0.4920 85. 0.4227 0.1786
36. 0.6944 0.4821 86. 0.4184 0.1751
37. 0.6874 0.4725 87. 0.4142 0.1716
38. 0.6805 0.4630 88. 0.4101 0.1681
39. 0.6736 0.4537 89. 0.059 0.1647
40. 0.6668 0.4446 90. 0.4018 0.1614
41. 0.6601 0.4357 91. 0.3977 0.1582
42. 0.6534 0.4270 92. 0.3938 0.1550
43. 0.6468 0.4184 93. 0.3897 0.1519
44. 0.6403 0.4101 94. 0.3859 0.1489
45. 0.6339 0.4018 95. 0.4819 0.1459
46. 0.6275 0.3938 96. 0.3781 0.1430
47. 0.6212 0.3859 97. 0.3743 0.1401
48. 0.6149 0.3781 98. 0.3704 0.1373
49. 0.6067 0.3705 99. 0.3667 0.1345
50. 0.6026 0.3631 100. 0.3631 0.1318
M-81
SAFE PERMISSIBLE LOAD ON MASONRY AND CONCRETE
TABLE – 1
Safe permissible load in MT /

S. No. Masonry / Concrete
Sqm.
1. Brick Masonry in CM 1 : 3 100
4. Brick Masonry in Lime Mortar 1 : 2 44

5. Ashlar stone Masonry in Lime Mortar 1 : 3 99 to 110
6. Rubble Masonry in Lime Mortar 30 to 50
7. Cement concrete 1 :1½ : 3 510

8. Cement concrete 1 :2 : 4 440
9. Cement concrete 1 :3 : 6 280

10. Lime Concrete 50 to 75
COMPRESSIVE STRENGTH OF MORTAR AND CONCRETE
TABLE – 2
S. No. Mix Compressive Strength in Kg/Cm2

After 7 days curing After 28 days curing
1. Cement Sand Mortar 1:3 38 75 to 100

4. Lime Sand Mortar 1:2 2.5 5 to 7
5. Lime Surkhi Mortar 1:2 7.5 15 to 20

6. Cement Concrete 1 : 4 : 8 38 75
7. Cement Concrete 1 : 3 : 6 70 100
8. Cement Concrete 1 : 2 : 4 105 150

9. Cement Concrete 1 : 1½ : 3 140 200
10. Cement Concrete 1 : 1 : 2 175 250

M-82
PROPERTIES OF MILD STEEL SQUARE AND ROUND BARS
TABLE-3
(0.7843KG./CM2/METRES)
Diameter Weight per Meter Sanctional Area Perimeter

or width Square Round Square Round Square Round
mm Kg. Kg. Cm2 Cm2 cm2 Cm2
05.0 0.20 0.15 0.25 0.20 2.0 1.57
05.5 0.24 0.19 0.30 0.24 2.2 1.77
06.0 0.28 0.22 0.36 0.28 2.4 1.88
07.0 0.38 0.30 0.49 0.38 2.8 2.20
08.0 0.50 0.39 0.64 0.50 3.2 2.51
09.0 0.64 0.50 0.81 0.64 3.6 2.83
10.0 0.78 0.62 1.00 0.79 4.0 3.14
11.0 0.95 0.75 1.21 0.95 4.4 3.46
12.0 1.13 0.89 1.44 1.13 4.8 3.77
13.0 1.54 1.21 1.96 1.54 5.6 4.40
16.0 2.01 1.58 2.56 2.01 6.4 5.03
18.0 2.54 2.00 3.24 2.54 7.2 5.65
20.0 3.14 2.47 4.00 3.14 8.0 6.28
22.0 3.80 2.98 4.84 3.80 8.8 6.91
25.0 4.91 3.85 6.25 4.91 10.0 7.85
28.0 6.15 4.82 7.84 6.16 11.2 8.80
32.0 8.04 6.31 10.24 8.04 12.8 10.05
36.0 10.17 7.99 12.96 10.18 14.40 11.31
40.0 12.56 9.86 16.00 12.67 16.00 12.57
45.0 15.90 12.49 20.25 15.90 18.00 14.14
50.0 19.62 15.41 25.00 19.64 20.0 15.71
56.0 24.62 19.34 31.36 24.63 22.4 17.59
63.0 31.16 24.47 39.69 31.17 25.2 19.78
71.0 39.47 31.08 50.41 39.49 28.4 22.31
80.0 50.24 39.36 64.0 50.27 32.0 25.13
M-83
PROPERTIES OF RIBBED OR TOR STEEL
TABLE – 4
Size Area Weight per Perimeter Length per Minimum

(mm) (Cm2) Metre (Kg.) (Cm) MT (Metre) Bend Radius
06 0.283 0.222 1.89 4510
08 0.503 0.395 2.51 2532
10 0.785 0.617 3.14 1631
12 1.131 0.888 3.77 1125
14 1.539 1.208 4.40 829 4d
16 2.011 1.578 5.03 633
18 2.545 2.000 5.65 500
20 3.142 2.466 6.28 405
22 3.801 2.980 6.91 336
25 4.909 3.854 7.85 260
28 6.157 4.830 8.80 207
32 8.042 6.313 10.05 159
36 10.179 7.990 11.31 125
40 12.566 9.864 12.57 101 6d
50 19.635 15.410 15.71 65
SUBSTITUTION AS TENSION REINFORCEMENT
TABLE – 5
Mild Steel
8 10 12 16 20 22 25 28 32 36 40 50
(mm)
Ribbed or
TOR Steel 6 8 10 12 16 18 20 22 25 28 32 36
(mm)
SUBSTITUTION AS TENSION REINFORCEMENT
TABLE – 6
Mild Steel
12 16 20 22 25 28 32 36 40 50
(mm)
Ribbed or
TOR Steel 10 14 2x12 18 20 22 2x18 2x20 32 40
(mm)
M-84
WEIGHTS OF CONSTRUCTION MATERIALS
TABLE – 7
S.
Materials Weight in Kg. Per Remarks
No.
Earth Soil Clay etc.
1. Earth alluvial undisturbed 1600 Cum.
2. Earth dry 1413 – 1850 Cum.
3. Earth Moist 1600 – 2000 Cum.
4. Clay wet compact 2080 Cum.
5. Clay Moist compact 1760 Cum.
6. Clay Dry compact 1440 Cum.
7. Clay Dry lumps 1040 Cum.
8. Gravel loose 1600 Cum.
9. Gravel rammed 1920 – 2160 Cum.
10. Shingle 3mm to 30mm 1460 Cum.
11. Sand dry clean 1540 – 1600 Cum.
12. Sand dry River 1840 Cum.
13. Sand wet 1760 – 2000 Cum.
14. Peat dry 580 – 640 Cum.
15. Sand dry compact 800 Cum.
16. Sand wet compact 1360 Cum.
17. Lime unslaked 870 – 1050
Liquids Cum.
1. Alcohol 780 Cum.
2. Creosote 1070 Cum.
3. Diesel oil 960 Cum.
4. Oil Linseed 930 Cum.
5. Oil Terpentine 860 Cum.
6. Petrol 690 Cum.
7. Varnish 960 Cum.
8. Water Fresh 1000 Cum.
9. Water Salty 1025 Cum.
Building Stones
1. Basalt 2600 Cum.
2. Ginesis 2400 – 2690 Cum.
3. Graphic 2690 – 2800 Cum.
4. Laterite 2080 – 2400 Cum.
5. Lime stone 2400 – 2640 Cum.
6. Marble 7220 Cum.
7. Pumice 800 – 1200 Cum.
8. Quartzite 2640 Cum.
9. Sand stone 2240 – 2400 Cum.
10. Slate 2800 Cum.
11. Chalk 1600 – 1920 Cum.
S. Materials Weight in Kg. Per Remarks
M-85
No.
Metals and Alloys
1. Iron pig 7200 Cum.
2. Grey cast iron 7030 – 7130 Cum.
3. Iron wrought 7700 Cum.
4. Steel cast 7850 Cum.
5. Steel wrought mild 7800 Cum.
6. Copper cast 8790 – 8940 Cum.
7. Copper wrought 8840 – 8940 Cum.
8. Lead cast 11340 Cum.
9. Lead wrought 11360 Cum.
10. Mangansee 7400 Cum.
11. Mercury 13600 Cum.
12. Nickel 8280 – 8810 Cum.
13. Aluminium 2580 – 2710 Cum.
14. Aluminium wrought 2640 – 2800 Cum.
15. Steel black plates 7.9 Sqm. per mm thickness
16. Copper plates 8.69 Sqm. per mm thickness
17. Lead plates 11.0 Sqm. per mm thickness
18. Aluminium plates 2.8 Sqm. per mm thickness
19. Brasses (Red & White) 8190 – 8220 Cum.
20. Brasses Yellow 8440 – 8680 Cum.
Timber
Hardwood such as axle
1 640-690 Cum
wood babool etc.
Light wood such as fir,
2 400-480 Cum
senal
Medium wood such as
3 480-640 Cum
Pine, Deodar, Chir. Mango
4 Teak 625 Cum
Bricks
Common brunt clay
1 1600-1920 Cum
bricks
2 Engineering bricks 2160 Cum
3 Brick blast 1200 Cum
4 Brick dust (Surkhi) 1000 Cum
Cement
1 Ordinary and alumina 1440 Cum
2 Repaid hardening 1050-1280 Cum
Cement concrete Plain
1 Areated 260 Cum
2. Brick Aggregate 1760-2160 Cum
3. Stone ballast 2240-2400 Cum
M-86
S.
Materials Weight in Kg. Per Remarks
No.
Reinforcement Cement Concrete
1 With 1% Steel 2310-2470 Cum
Concrete with brick agg.
4 1920 Cum
and lime mortar
Masonry
Brick masonry with
1 1920 Cum
common burnt clay bricks
Brick masonry with 7
2 2400 Cum
mounted bricks
3 Stone masonry dry rubble 2000 Cum
Stone masonry in mortar
4 of lime, sand stone, 2240-2640 Cum
granite etc.
Roofing
Country tilled (Double)
1 120 Sqm
including battens
2 Country tiled (Single) 70 Sqm
Manglore tiled with
3 65 Sqm
battons
4 C.G.I. Sheet 10-13 Sqm
5 A.C. Sheet 34 Sqm
Mortar
1 Cement 2030 Cum
2 Lime 1600-1840 Cum
M-87
USEFUL CONVERSION TABLES
TABLE 8
S. No To Convert Into Multiply By Divide By

1 Metres Yards 1.09361 0.9144
2 Metres Feet 3.28084 0.3048
3 Metres Inches 39.3701 0.0254
4 Kilometre Mile 0.62137 1.60934
5 Square Kilometre Square Mile 0.386101 2.58999
6 Square Metre Sq. Yards 1.19599 0.83613
7 Square Yards Sq. Ft. 10.7659 0.092903
8 Square Metre Sq. Inches 1550.00 0.00064516
9 Square Centimetres Sq. Inches 0.1550 6.4516
10 Hectare (1000 Sq. M.) Acres 247105 0.404686
11 Cubic Metres Cubic Ft. 35.3147 0.028317
12 Cubic Metres Gallons (IMP) 2.19969 0.00454609
13 Cubic Centimetres Cubic Inches 0.061024 16.3871
14 Litre Gallon 0.219975 4.54506
15 Kilograms Pounds 2.2046 0.4535924
16 Quintal (100 Kg.) Maunds 2.67923 0.373242
17 Quintal (100 Kg.) Hundred Weight 1.96840 0.50802
18 Tonnes (Metric Ton) Tons (British) 0.9892 1.01605
19 Tonnes (Metric Ton) Maunds 26.7923 0.0373242
20 Kilometres per hour Miles Per hour 0.62173 1.60934
21 Kilometres per hour Ft. per Sec. 0.91134 1.09728
22 Gramme per Cub. Cm. Pound Per cu. Inch 0.0361273 26.6799
23 Kilometres per Cum Pound Per cu. Ft. 0.0624 16.018
24 Kilometres per litre Pound Per cu. Ft. 62.426 0.0160189
25 Kilometres per Sqm Pound Per Sq. Inch 14.2233 0.07.0307
26 Tonne/Per Sqm Ton per Sq. foot 0.09143 10.937
27 Kilometres per Sqm Pound Per Sq. Ft. 0.20428 4.8924
28 Kilometres per metre Pound Per Ft. 0.61797 1.48816
29 Kilometres Metre Ft Pound 7.231 0.1382
M-88
MATERIAL CONSUMPTION STATEMENT
QUANTITY OF MATERIALS REQUIRED FOR VARIOUS TYPE OF
MASONRY FOR ONE CUM.
S. No. Type of Masonry Qty. of Stone / Qty. of

Bricks Mortar Cum
1. R.R. Stone masonry for foundation / 1.14 Cum 0.33
superstructure wall in mortars.
2. Dry Stone R.R. retaining wall masonry 1.14 Cum --
3. Dry Stone C.R. retaining wall masonry 1.24 Cum --
4. R.R. Dry Stone Pitching 1.14 Cum --
5. C.R. Dry Stone Pitching 1.24 Cum --
6. R.R. Stone Pillar masonry in mortar 1.20 Cum 0.33
7. Arch masonry in mortar 1.25 Cum 0.25
8 Cut Stone Arch masonry in mortar 1.25 Cum 0.25
9 Relieving Arch masonry in mortar 1.25 Cum 0.25
10 Brick masonry for foundation / superstructure in
mortars size 22.9x11.1x7.0cm. with 1cm. thick
mortar joint. 473Nos 0.237
QUANTITY OF MATERIALS FOR VARIOUS NOMINAL MIX

(ONE CUM OF CONCRETE)
S. Mix Requirement of Cement Sand Coarse

No. Cum Tonnes Bags Aggregate
1 Cement Concrete M-20 (1:1.5:3) 0.283 0.400 8.00 0.425 0.85
2 Cement Concrete M-15 (1:2:4) 0.222 0.322 6.44 0.445 0.90
3 Cement Concrete (1:3:6) 0.156 0.220 4.40 0.470 0.94
4 Cement Concrete (1:4:8) 0.120 0.170 3.40 0.48 0.96
5 Cement Concrete (1:5:10) 0.098 0.140 2.80 0.49 0.98

M-89
MATEIAL CONSUMPION STATEMENT FOR VARIOUS TYPE OF

MORTARS FOR ONE CUM
S. Mix Requirement of Cement Lime Sand / Marble

No. Cum Tonnes Bags Cum Powder
1 Lime Sand Mortar (1:2) -- -- -- 0.475 0.95
2 Lime Sand Mortar (1:3) -- -- -- 0.367 1.07
3 Cement Mortar (1:3) 0.357 0.510 10.20 -- 1.07
4 Cement Mortar (1:4) 0.258 0.386 7.72 -- 1.07
5 Cement Mortar (1:5) 0.214 0.308 6.16 -- 1.07
6 Cement Mortar (1:6) 0.179 0.256 5.12 -- 1.07
7 Cement Mortar (1:7)\ 0.153 0.220 4.40 -- 1.07
8 Cement Mortar (1:8) 0.134 0.193 3.86 -- 1.07
Composite Mortar (Cement :

9 0.178 0.256 5.12 0.178 1.07
Lime : Sand) 1:1:6
Composite Mortar (Cement :
10 0.190 0.173 3.46 0.24 1.07
Lime : Sand) 1:2:9
M-90
Requirement of
S. No. Description of Item Unit Bags of 50 Kg.
Cement Cum
RCC/BR Work :
1. R.B. work in cement mortar 1 : 2 Cum 3.00
2. R.C.C. door and window frames :

(a) 100 x 75 mm size Mtr. 0.06
(b) 125 x 75 mm size Mtr. - 0.07
3. R.C.C. shelves in 1 : 2 : 4 mix :

(a) 20mm thick Sqm - 0.13
(b) 25mm thick Sqm - 0.16
(c) 30 mm thick Sqm - 0.19
4. Pre cast cement concrete jali in

1 : 2 : 4 for fixing of :
(c) 30mm thick Sqm - 0.03
(d) 20mm thick Sqm - 0.03
Masonry :
5. R.R. stone masonry in :
(a) Cement mortar 1 : 3 Cum - 3.40
(b) Cement mortar 1 : 4 Cum - 2.50
(c) Cement mortar 1 : 6 Cum - 1.60
(d) Cement mortar 1 : 8 Cum - 1.25
(e) Cement lime sand mortar 1 : Cum - 1.10
2:9
(f) Cement lime sand mortar 1 : Cum - 0.85
3 : 12
6. Ashlar veneer facing in cement Cum - 0.25

mortar 1 : 4 including Cement
pointing in 1 : 3 cement mortar.
7. Brick masonry in :
(a) Cement mortar 1 : 3 Cum - 2.40
(b) Cement mortar 1 : 4 Cum - 1.80
(c) Cement mortar 1 : 6 Cum - 1.20
(d) Cement mortar 1 : 8 Cum - 0.90
(e) Cement lime sand mortar Cum - 0.80
1:2:9
(f) Cement lime sand mortar Cum - 0.60
1 : 3 : 12
8. 75mm thick brick pardi wall in :

(a) Cement mortar 1 : 4 Sqm - 0.15
(b) Cement mortar 1 : 6 Sqm - 0.09
(c) Cement mortar 1 : 8 Sqm - 0.07
9. 112mm thick brick pardi wall in :

M-91
Requirement of
Cement Cum
(c) Cement mortar 1 : 8 Sqm - 0.10
Damp Proof Course :
10. Laying damp proof coarse 25mm Sqm - 0.255

thick in C.M. 1 : 3.
11. Laying cement concrete M.15 (1 :

2 : 4) for damp proof or coping :
(c) 75mm thick Sqm - 0.480
(d) 100mm thick Sqm - 0.640
Stone Work
12. Fixing stone sills and coping in Sqm - 0.10

cement mortar 1 : 3
13. Fixing stone sills and coping in Sqm - 0.08

cement mortar 1 : 4
14. Fixing stone shelves in cement Sqm - 0.02

mortar 1 : 3
15 Fixing Karauli stone steps in Sqm - 0.08

cement mortar 1 : 4
Roofing :
16. Stone slab roofing. Sqm - 0.01
17. Brick kharanja in cement sand Sqm - 0.09

mortar 1 : 4 on edge.
18. Providing flat brick kharanja in Sqm - 0.07

cement mortar 1 : 6.
19. Providing stone slab covering Sqm - 0.43

over drain including filling of
joints in cement sand mortar 1 : 3
with 35mm thick cement concrete
flooring 1 : 2 : 4.
20. Making khurras 45 x 45 C.M. Each - 0.12

with minimum 5cm. thick cement
concrete 1 : 2 : 4 over PVC sheet,
finished with 12mm cement
plaster 1 : 3 and a floating coat of
cement.
M-92
Requirement of
Cement Cum
Flooring :
21. Coarse stone paving 125mm to Sqm - 0.25

150mm with pointing in cement
mortar 1 : 3.
22. Coarse stone paving 200mm to Sqm - 0.20

225mm with pointing in cement
mortar 1 : 3.
23. Brick on edge flooring laid on Sqm

12mm thick mortar including
filling joints with slurry etc. in :
(a) Cement sand mortar 1 : 6 Sqm - 0.26
(b) Cement sand mortar 1 : 4 Sqm - 0.37
25. Providing and laying cement

concrete flooring in M 10 grade :
(a) 25 mm thick. Sqm - 0.11
(b) 30 mm thick. Sqm - 0.13
(c) 38 mm thick. Sqm - 0.17
(d) 50 mm thick. Sqm - 0.22
(e) 75 mm thick. Sqm - 0.33
26. 40mm thick red oxide flooring Sqm - 0.35

under layer of 30mm thick
cement concrete 1 : 2 : 4 and top
layer of 10 mm thick plaster of
cement red oxide mix and sand
mortar 2 : 3 finished with a coat
of neat cement red oxide mix etc.
27. 40 mm thick polished cement Sqm - 0.40

concrete flooring under layer of
30mm 1 : 2 : 4 concrete and top
layer 10 mm thick of mix 1 : 2
cement stone dust etc.
M-93
Requirement of
Cement Cum
28. 52mm thick cement concrete Sqm - 0.46
flooring with metallic concrete
hardner topping under layer of
40mm thick 1 : 2 : 4 concrete and
top layer of 12mm thick metallic
concrete hardner consisting of
mix 1 : 2 cement metallic
hardening compound mixed in
ratio 4 : 1 (4 cement 1 : part of
metallic hardening compound by
wt.) including slurry etc.
complete.
29. Cement plaster skirting with

cement mortar 1 : 3 finished with
a floating coat of neat cement :
30. Red oxide plaster skirting with

top layer of 6mm thick cement
red oxide mix in mortar 1 : 3
(cement red oxide 1 : sand 3)
finished with a floating coat of
cement red oxide mix:

M-94
Require-
Bags of 50
ment of Bags of 50
S.No. Description of Item Unit Kg.
Cement Kg. (White)
(OPC)
Cum
31. 40mm thick marble chips
flooring under layer 34mm
thick cement concrete 1 : 2 :
4 and top layer of 6mm thick
marble chips laid in cement
marble powder mix 3 : 1 by
weight in proportion of 4 : 7
(4 marble cement powder : 7
marble chips) including
cement slurry :
(a) With ordinary cement. Sqm - 0.34 -
(b) With dark shade pigment Sqm - 0.33 -

with ordinary cement.
(c) Light shade pigment with Sqm - 0.26 0.068

white cement or without
pigment in white cement.
(d) Medium shade pigment Sqm - 0.30 0.034

with approximately 50%
white cement and 50%
ordinary cement.

4 and top layer of 9mm thick
marble chips laid in cement
marble powder mix 3 : 1 by
weight in proportion of (4
marble cement powder : 6
cement slurry :
(b) With dark shade pigment Sqm - 0.36 -

with ordinary cement.
(c) Light shade pigment with Sqm - 0.24 0.102


ordinary cement.
M-95
Require-
Bags of 50
ment of Bags of 50
Cement Kg. (White)
(OPC)
Cum
4 and top layer of 12mm
thick in cement marble
powder mix 3 : 1 by weight
in proportion of (4 cement
marble powder mix : 5
cement slurry etc :
(b) Dark shade pigment in Sqm - 0.38 -

ordinary cement.
(c) Light shade pigment in Sqm - 0.21 0.136


with 50% white cement and
50% ordinary cement..

4 and top layer of 15mm
thick cement marble powder
mix 3 : 1 by weight in
proportion of cement marble
powder mix marble chips by
volume including cement
slurry etc. complete :

ordinary cement.


ordinary cement.
35. Marble chips skirting 26mm

thick under layer 20mm
M-96
Require-
Bags of 50
ment of Bags of 50
Cement Kg. (White)
(OPC)
Cum
thick cement plaster 1 : 3
and top layer of 6mm thick
marble chips :

ordinary cement.


with 50% white cement and
50% ordinary cement..
M-97
Requirement
Bags of 50
S. No. Description of Item Unit of Cement
Kg.
Cum
36. Crazy marble stone flooring
including filling the gaps with
cement marble chips mixture
3 : 1 by weight in the
proportion of 4 : 7 (4 cement
marble powder mix : 7 marble
chips) by volume and under
layer of 25mm thick cement
concrete 1 : 2 and slurry etc.
complete :
(a) With Irregular shaped crazy. Sqm - 0.24
(b) With rectangular fine edged Sqm - 0.20

crazy.
37. Providing & fixing of pre-cast

terrazo chequered or or
embossed / ironite toppings
tiles over 20 mm thick bed of :
38. Providing & fixing of Kota, Sqm - 0.18

Modak flooring over 20mm
thick base of lime mortar
jointing with cement mortar
1:3.
39. Providing & fixing of Kota, Sqm - 0.15

polished stone laid on 12mm
thick cement mortar 1 : 3 and
jointing with neat cement
slurry.
40. Marble stone flooring over 20

mm thick base jointed with
white cement slurry etc.
complete on (All marble slabs):
(a) Base lime mortar Sqm - W0.02
(b) Base cement mortar 1 : 4 Sqm - 0.15

41. Marble slabs in risers steps Sqm - 0.13
skirting dado wall of pillars on
12 mm thick cement mortar 1 :
3 jointed with white cement.
M-98
Requirement
Bags of 50
Kg.
Cum
Plaster :
42. Cement plaster 12 mm thick :
(a) Cement sand 1 : 3 Sqm - 0.15
(b) Cement sand 1 : 4 Sqm - 0.11
(c) Cement sand 1 : 6 Sqm - 0.07
(d) Cement sand 1 : 8 Sqm - 0.05
43. 20 mm thick cement plaster :
(a) Cement sand 1 : 3 ratio. Sqm - 0.23
(b) Cement sand 1 : 4 ratio. Sqm - 0.17
(c) Cement sand 1 : 6 ratio. Sqm - 0.11
(d) Cement sand 1 : 8 ratio. Sqm - 0.08
44. 25 mm thick cement plaster :
(d) Cement sand 1 : 8 ratio. Sqm - 0.10
45. Cement lime plaster 1 : 1 : 6

ratio :
(a) 25 mm thick Sqm - 0.14
(b) 20 mm thick Sqm - 0.12
46. Cement lime plaster 1 : 2 : 9

ratio :
(a) 25 mm thick Sqm - 0.10
(b) 20 mm thick Sqm - 0.08

M-99
Requirement
Bags of 50
Kg.
Cum
47. 6 mm cement plaster to ceiling:
48. Neat cement punning. Sqm - 0.04
49. Fine finishing coat of cement Sqm - 0.04

sandla
50. Providing on stone masonry in

cement mortar 1 : 3 :
(a) Flush or ruled or sunk of Sqm - 0.024

weather proof
pointing.
(b) Raised and cut pointing Sqm - 0.04
51. Pointing on brick or tile work

in cement mortar 1 : 3 :
(b) Raised and cut pointing Sqm - 0.033
52. Coursed Rubble masonry in Cum - 1.50

cement mortar 1 : 6 in super
structure.
53. Plain Ashlar masonry in super Cum - 1.08

structure in cement mortar 1 : 6
including pointing with cement
mortar 1 : 2.
54. Providing & fixing horizontal Sqm - 0.10

chhajja of stone in cement
mortar 1 : 4 including pointing
in cement mortar 1 : 2.
55. Providing & fixing EZ-7 frame Quintal - 0.22

embedded in cement concrete
block 15 x 10 x 10 cm. size of
1 : 3 : 6.
M-100
Requirement
Bags of 50
Kg.
Cum
56. Providing and fixing M.S. ring 100 - 0.10
for fastening ropes of chick. Nos.
57. Fixing chowkhats in opening

including embedding
chowkhats in floor, cutting
masonry for hold fasts
embedded in C.C. 1:3:6
and making good the wall :
(a) Door chowkhats. Each - 0.24
(b) Window chowkhats. Each - 0.12
(c) Clear storey window. Each - 0.66
58. Providing and fixing M.S. fan Each - 0.03

clamp in existing R.C.C. slab
including cutting and making
good.
59. Replacing sand stone slabs in Sqm - 0.01

roof laid in cement mortar 1 : 4
including necessary repairs and
cement pointing.
SANITARY :
60. Fixing of water closets (all Each - 0.10
type) along with flushing
cisterns and brackets,
telescopic flush pipe of bend
with fittings and clamps,
overflow pipes complete
including cutting making walls
and floors good.
61. Urinal basin with automatic Each - 0.05

flushing cistern.
62. Range of two urinals with one Each - 0.08

automatic flushing cistern.
63. Range of three urinals with one Each - 0.13

64. Range of four urinals with one Each - 0.19

M-101
Requirement
Bags of 50
Kg.
Cum
65. Fixing long Pan pattern or Each - 0.05
Orissa pattern W.C. pan.
66. Fixing a pair of white glazed Each - 0.10

earthen ware or vitreous china
foot rest.
67. Fixing flat back or wall corner Each - 0.02

tube lipped front urinal basin.
68. Fixing laboratory basin with Each - 0.05

brackets, pillar taps etc., cutting
and making wall good.
69. Fixing sink with brackets Each - 0.05

including cutting and making
good the wall.
70. Fixing wash basin. Each - 0.03
71. Fixing M.S. holder bat clamps Each - 0.005

or M.S. stays and clamps.
72. Fixing sand cast iron trap. Each - 0.025
73. Providing and fixing wall face 100 - 0.17

C.I. pipes including filling the Mtr.
jointing with spun yarn soaked
neat cement slurry and cement
mortar 1 : 2.
74. Providing and fixing on wall

face C.I. assessories for rain
water pipe fittings, the joints
with spun yarn soaked in neat
cement slurry and cement
mortar 1 : 2 :
(a) 75 mm dia. Each - 0.005
(b) 100 mm dia. Each - 0.006
(c) 150 mm dia. Each - 0.01

M-102
Unit Weight of Aluminium Sections
S. No. Size of Aluminium Section Unit Weight

Doors & Partitions
1. 101.60 X 44.45 X 2.00 MM 83.50 X 44.45 X 2.0 MM 1.64 Kg/M + 5 %
63 X 38 X 2.0 MM 150.0 X 44.45 X 2.0 MM
44.45 X 44.45 X 2.0 MM
2.
3.
4.
5.
Snap Beading
1. 16.6 X 18.2 X 1.0 MM
Sliding Windows
1. 62.0 X 30.0 X 1.6 MM 62.0 X 30
2.
3.
4.
5.
6.
Hollow Sections
Z inner
Z outer
Mullion
M-103
M-104
M-105
M-106
M-107
M-108
M-109
M-110
M-111
M-112
M-113
M-114
M-115
M-116
M-117
M-118
M-119
M-120
M-121
M-122
M-123
M-124
M-125
M-126
M-127
M-128
M-129
M-130
M-131
KERBS AND CROSSINGS
The pavement shoutei dropped to be

flush with the road way gradient no
greater than 1:12 ors both sides of
necessary and convenient crossing
points.
The crossing points should also bo highlighted by tactile psving/gukling blocks

BSR 2022final 30.9.2022

Uploaded by

Copyright:

Available Formats

BSR 2022final 30.9.2022

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BSR 2022final 30.9.2022

Uploaded by

Copyright:

Available Formats

GOVERNMENT OF RAJASTHAN

PUBLIC WORKS DEPARTMENT

BASIC SCHEDULE OF RATES 2022

 GENERAL BASIC RATES

input (Machinery) [1]

input (Labour) [2]

input (Material) [3]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [4]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [5]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [6]

CODE NAME OF MATERIALS UNIT RATE

876 Green or blue medium shade pigment kilogram 70.00

input (Material) [7]

CODE NAME OF MATERIALS UNIT RATE

1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 150.00

input (Material) [8]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [9]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [10]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [11]

CODE NAME OF MATERIALS UNIT RATE

1620 S.C.I. plain bend75mm dia each 391.00

1693 S.C.I. hand pump each 630.00

input (Material) [12]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [13]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [14]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [15]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [16]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [17]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [18]

CODE NAME OF MATERIALS UNIT RATE

7111 C.P. lugs for toilet seat cover. 95.00

input (Material) [19]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [20]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [21]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [22]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [23]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [24]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [25]

CODE NAME OF MATERIALS UNIT RATE

input (Material) [26]

CODE NAME OF MATERIALS UNIT RATE