1.

Fiber Optic Cable

a. 2- 24 cores

SLT STA with E-Glass 2 to 24 cores fibre OS1/OS2 ITU-T G.652D, single mode 250 µm single loose tube
metallic armoured internal/external rodent resistant duct and direct burial cables with E-glass strength
members, and Low Smoke Zero Halogen (LSZH) or Polyethylene (PE) jacket. The single loose tube cables
consists of 2 to 24, 250 µm optical fibres in a single gel filled loose tube with longitudinally applied Eglass
nonmetallic strength members, Corrugated Steel Tape (CST) armouring and LSZH or PE jacket.

Features:
 Choice of fibre types
 Colour coded fibres
 CST armouring for enhanced impact, crush and rodent resistance
 Compact 250 µm loose tube construction
 Flame retardant LSZH jacket for enhanced fire performance or PE jacket for environmental
protection and water permeation resistance

Specification:
Parameter Unit Value
Crush N/100 mm 2000
Strength member E-glass
Storage temperature °C -20 to 60
Installation temperature °C -5 to 50
Operating temperature °C -20 to 60
Nominal weight 2f to 24f kg/km 110 (LSZH) 86 (PE)
2, 4, 6, 8, 12, 16 &
Fibre count n
24
Nominal outer diameter 2f to 24f mm 9.0 ±0.3
Maximum tensile load (Short Term) N 1000
Maximum tensile load (Long Term) N 500
Minimum bend radius mm Installed 20D
Minimum bend radius mm Loaded 20D
Drum length km 2 or 4
Plywood drum dimensions (Flange,Barrel,Width) 4km 14f to mm
F1100, B500, W690
24f (approximately)
Drum weight with cable 4km 14f to 24f kg (approximately) LSZH 461 PE 365
Technical Drawing:

b. 24 – 144 Cores
The multi loose tube cable construction consists of up to up to 12 elements and a maximum of 144, 250
µm optical fibres in 12 fibre gel filled loose tubes with fillers where appropriate, SZ stranded around a
jacketed Fibre Reinforced Plastic (FRP) central strength member with water swellable threads and water
swellable tape. Helically applied water blocking e-glass non metallic strength members with ripcord.
Corrugated Steel Tape (CST) armouring and black Polyethylene (PE) or Low Smoke Zero Halogen (LSZH)
jacket.

Features:
 Choice of fibre type
 Colour coded fibres
 High water resistant
 High crush resistant
 PE / LSZH jacket

Specification:
Value
Parameter Unit 24 TO 60 120 144
72 Cores 96 Cores
Cores Cores Cores
12.6 ± 14.1 ± 15.6 ± 17.1 ±
Outer Diameter mm 12.0 ± 0.4
0.4 0.4 0.4 0.4
Weight kg/km 166 173 207 243 284
Max. Load (installation) N 1500 1500 1500 1500 1500
Max. Load (installed) N 600 600 600 600 600
Min. Bend Radius
mm 240 252 280 320 340
(installation)
Min. Bend Radius (installed) mm 240 126 280 320 340
Operating Temperature °C -30~+70 -30~+70 -30~+70 -30~+70 -30~+70
Storage Temperature °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Installation Temperature °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
N/100
Crush Resistance 3000 3000 3000 3000 3000
mm

Technical Drawing:

c. Droop Wire
Drop cable all dielectric for Fibre To The Home (FTTH or FTTx) application containing from 1 to 4 250 µm
individually coloured single mode optical fibres. The cable contains two Fibre Reinforced Plastic (FRP)
strength members and Low Smoke Zero Halogen (LSZH) jacket with nominal dimension 2 x 3 mm.

Features:
 Choice of fibre types
 Single mode optical fibre meting ITU-T G.657A1 or ITU-T G.657A2
 Individually coloured optical fibres
 Notched 2 x 3 mm construction for easy stripping
 White LSZH jacket for internal use
 Black LSZH jacket for short distance external use

Specification:
Parameter Unit Value
Crush (short term) N/100 mm 1000
Strength member FRP
Storage temperature °C -20 to 60
Installation temperature °C -5 to 50
Operating temperature °C -20 to 60
Primary buffer diameter µm 250
Fibre count n 1 to 4
Nominal outer diameter mm 2.0 x 3.0 ± 0.2
Nominal weight kg/km 7
Maximum tensile load N 80
Minimum bend radius mm 15
Plywood drum dimensions (Flange,Barrel,Width) 4km mm (approximately) F630, B300, W250
Drum weight with cable 4km kg (approximately) 22

Technical Drawing:

2. Fiber Patch Panel

a. Fiber Patch Panel 8 – 24 cores
The removable front panels chassis is a 19 inch 1U sliding panel in two parts: one sliding chassis and one
front panel, which receives the optical adaptors. The flexibility of its two piece construction allows you
to maintain a stock of the chassis and then attach a suitable front panel as required.

Features:
 Recessed panel option
 No exposed screws
 Screen printed for easy labelling
 45° working angle
 Rear cable entry options
 Panel numbers and rack number identification labels
 High quality finish, no sharp edges

Specification:
Element Characteristic
U Size 1U (44.4mm)
Width 482mm
Depth 204mm
Net weight 2.1 kgs
Packaged weight 3 kgs
Packaged dimensions 530mm W X 55mm H x 260mm D
IP rating IP20
Suitable for Adaptor type All
Mounting Adjustment range 50mm
Cable entry 20mm 2
Cable entry 25mm 2
Material Cold- rolled steel
Material thickness 1.2mm
Material coating Electro Static Powder Coating
Colour Black RAL 9004Grey RAL 7035
Operating temperature -40°C to +50°C
Designed in accordance with TIA/EIA 568.C, ISO/IEC 11801, EN 50173, IEC 60304, IEC 61754, EN 297-1
Compliant to RoHS, Reach/SVHC

b. Fiber Patch Panel 48 – 72 cores

This innovative, robust, 2U sliding panel with a smoked plexi glass hinged front door. This panel has
been designed to accept up to 6 LGX style assemblies.
With the ability to use a full array of adapter types, this panel offers a flexible solution to the end user,
enabling them to incorporate a multi functional chassis that allows easy access during installation or
rework with no disturbance of the existing cable or fibres.
In the addition to the array of adaptors the panel also offers multiple cable entry solutions, MTP® trunk
cables connected to 6 individual MTP® cassettes with up to 24 fibres in each, loose tube cable to be
spliced into standard splice cassettes to allow standard splicing or pre terminated solutions, making this
panel one of the most flexible on the market.

Features:
 Up to 6 LGX components in 2U
 19” and 23” Rack mountable
 Sliding tray for ease of installation
 Integrated Sprung loaded tray stop
 Up to 6 x 24 fibre MTP® cassettes
 Multiple adapter options available
 Splicing accessories included 2 x spools 2 x SPT01 splice tray
 Side Patch cord exit
 Hinged front plexi glass door
 Removable top cover
 Accepts loose tube, distribution cable and MTP® trunk cable
  RoHS, REACH SvHC

Specification:
Element Characteristic
Height 2U (8.89cm)
Width 432mm
Depth 356mm
Net weight 7.5kgs
Packaged weight 8.0kgs
Packaged dimensions 510mm (W) x 450mm (L) X 170mm (H)
Suitable for Adaptor type LGX / MTP Cassettes
Number of Module Positions 6
IP Rating IP20
Material Cold- rolled steel
Material thickness 1.2mm
Material Finish Powder coating
Colour RAL 9004
Operating temperature -40°C to +60°C
Designed in accordance with TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304, IEC61754,
Compliant to RoHS, Reach/SVHC

c. Fiber Patch Panel 96 – 144 cores

This innovative, robust, 4U sliding panel with a smoked plexi glass hinged front door. This panel has
been designed to accept up to 12 LGX style assemblies.With the ability to use a full array of adapter
types, this panel offers a flexible solution to the end user, enabling them to incorporate a multi
functional chassis that allows easy access during installation or rework with no disturbance of the
existing cable or fibres.In the addition to the array of adaptors the panel also offers multiple cable entry
solutions, MTP® trunk cables connected to 12 individual MTP® cassettes with up to 24 fibres in each,
loose tube cable to be spliced into standard splice cassettes to allow standard splicing or pre terminated
solutions, making this panel one of the most flexible on the market.
Features:
 Up to 12 LGX components in 4U
 19” and 23” Rack mountable
 Sliding tray for ease of installation
 Integrated Sprung loaded tray stop
 Up to 12 x 24 fibre MTP® cassettes
 Multiple adapter options available
 Side Patch cord exit
 Hinged front plexi glass door
 Removable top cover
 Accepts loose tube, distribution cable and MTP® trunk cable
 RoHS, REACH SvHC

Specification:
Element Characteristic
Height 4U (177.8mm)
Width 432mm
Depth 356mm
Net weight 9.0kg
Packaged weight 9.5kg
Packaged dimensions 510mm (W) x 450mm (L) x 260mm (H)
Suitable for Adaptor type LGX / MTP Cassettes
Number of module positions 12
IP Rating IP20
Material Cold- rolled steel
Material thickness 1.2mm
Material finish Powder coating
Colour RAL 9004
Operating temperature -40°C to +60°C
Designed in accordance with TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304, IEC61754,
Compliant to RoHS, Reach/SVHC
 3. Fiber Pigtail
Single mode enhanced pigtails are used in telecom, datacom networks and also used for high speed
metropolitan and access network. The single mode pigtail buffer conforms to IEC, EIA TIA or Telcordia
standards. The single mode pigtails are terminated with optimised connectors each supplied with a
protective cap on the zirconia ceramic ferrule.

Features:
 SC, LC, ST and FC Connectors
 UPC and APC Connectors
 Low smoke zero halogen (LSZH) buffer
 900 µm tight buffer or easy strip structure
 OS1/OS2 optical fibre conforms to ITU-T G.652D, TIA/EIA 492 CAAA
 OS1/OS2 bend insensitive optical fibre conforms to ITU-T G.657A1 or A2
 Available with non zero dispersion shifted single mode ITU-T G.655 optical fibre
 Different connector performance range for specific application available
 Available in standard white colour buffer and also in standard 12 colours as per IEC 60304
 Available in standard and blister packing
 Pigtail with semi-tight buffer - 100 mm nominal strip length - available
 REACH, RoHS & SvHC materials compliant

Connector Specification:
OPTICAL PERFORMANCE SINGLE MODE CONFORMANCE
IL Max/Master (Acceptance) 0.25 dB IEC 61300-3-4
Ave/Master 0.18 dB IEC 61300-3-4
Ave/Random 0.18 dB IEC 61300-3-34
Return Loss 55/65 dB IEC 61300-3-6
Cable Specification:
CHARACTERISTICS UNITS SIMPLEX
Crush N/100 mm 500
Operating Temperature °C -20 to 60
Stripping Length - Easy Strip m 1.5 minimum
Stripping Length - Tight buffer mm 30 nominal
Nominal buffer Diameter µm 900 +/- 50
Max Tensile Load N 6

4. Fiber Patch Cord

Single mode patch cords are used for telecom networks and also used for high speed metropolitan and
access network. The single mode patch cords are manufactured using LSZH cables which conform to IEC,
EIA TIA or Telcordia standards. The OS2 enhanced patch cords are terminated with optimised
connectors which give optimum optical performance.

Features:
 FC, LC, MTRJ, MU, SC and ST connectors
 UPC and APC connectors
 Low smoke zero halogen (LSZH) jacket in yellow colour
 900 µm or 600 µm tight buffer
 OS1/OS2 cabled fibre conforms to ITU-T G.652D, TIA/EIA 492 CAAB, ITU-T G.657A1 or A2
 Simplex and duplex assemblies
 Duplex assemblies available with clips (SC and LC)
 Different connector performance range for specific application available
 Armoured option also available
 REACH, RoHS & SvHC materials compliant

Connector Specification:
SINGLE
OPTICAL PERFORMANCE CONFORMANCE
MODE
IL Max/Master (Acceptance) 0.25 dB IEC 61300-3-4
Ave/Master 0.18 dB IEC 61300-3-4
Ave/Random 0.18 dB IEC 61300-3-34
Return Loss 55/65 dB IEC 61300-3-6
Cable Specification:
CHARACTERISTICS UNITS SIMPLEX
Cable Material LSZH LSZH
Strength Member Aramid Aramid
Crush (N) 1000 1000
Operating Temperature (°C) -20 to 60 -20 to 60
Fire Specification IEC 60332-1 IEC 60332-1

Fibre Specification:
CHARACTERISTICS
Attenuation (dB / km) 0.38 @ 1310 nm / 0.25 @ 1550 nm
Chromatic Dispersion (ps/nm x km) 3.0 @ 1310 nm / 18.0 @ 1550 nm

5. Fiber Splitter
a. 1xN 2xN PLC Splitter
Growth in today’s broadband applications demand reliable high performance splitters for use within a
variety of environmental conditions and packaging options. A move towards PON’s within the FTTX
arena calls for a device offering low insertions loss, linear uniformity and high return loss, our splitters
provide excellent specifications as well as complying to and exceeding Telcordia GR-1221-CORE and GR-
1209-CORE standards.

Features:
 Designed to meet Telcordia standards
 Low IL and PDL
 Excellent uniformity
 Range of packaging options available
 High specification connectors available

Specification:
SPLITTER TYPE (ABS TYPE)
Parameter
1x2 1x4 1x8 1x16 1x32 1x64 2x2 2x4 2x8 2x26 2x32
Operating
1260~1650nm
Wavelength
Insertion Loss
(MAX, dB) 3.8 7.1 10.2 13.5 16.5 20.4 4.0 7.4 10.5 13.9 17.5
Return Loss (dB)
 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0

PDL (MAX, dB)

0.2 0.2 0.3 0.3 0.3 0.4 0.2 0.2 0.3 0.3 0.3
Loss Uniformity
(MAX, dB) 0.5 0.7 0.8 1.0 1.5 2.0 0.8 1.0 1.2 1.5 2.0
Directivity (dB)
55.0 55.0 55.0 55.0 55.0 55.0 55.0 55.0 55.0 55.0 55.0
Dimension, Bare type 250um
Length (mm)
40.0 40.0 40.0 50.0 50.0 60.0 50.0 50.0 50.0 60.0 60.0
Width (mm)
4.0 4.0 4.0 7.0 7.0 12.0 4.0 4.0 4.0 7.0 7.0
Height (mm)
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
Dimension, Component type 900um
Length (mm)
60.0 60.0 60.0 60.0 80.0 100.0 65.0 65.0 65.0 70.0 85.0
Width (mm)
7.0 7.0 7.0 12.0 20.0 40.0 7.0 7.0 7.0 12.0 20.0
Height (mm)
4.0 4.0 4.0 4.0 6.0 6.0 4.0 4.0 4.0 4.0 6.0
Dimension, ABS type 2mm & 3mm
Length (mm) 100
100.0 100.0 120.0 120.0 141.0 100.0 100.0 100.0 120.0 120.0
Width (mm) 80
80.0 80.0 80.0 80.0 115.0 80.0 80.0 80.0 80.0 80.0
Height (mm) 10
10.0 10.0 18.0 18.0 18.0 10.0 10.0 10.0 18.0 18.0
Temperature
-40 + 80
Range (°C)

b. 1xN 2xN PLC Splitter Modules

Introducing range of high performance splitters loaded into a variety of management products to
include 19” rack mounted panels and LGX modules. Amove toward PON’s within the FTTX arena calls for
a device offering low insertions loss, linear uniformity and high return loss, our splitters provide
excellent specifications on all of the above as well as complying to and exceeding Telcordia GR-1221-
CORE and GR-1209-CORE standards.

Features:
 Designed to meet Telcordia standards
 Non-standard housing options available
 Low IL and PDL
 Excellent uniformity
 Range of packaging options available
 High specification connectors available

Specification:

Parameter 1x 1x1 1x3 1x6 2x 2x2 2x3

1x8 2x8
4 6 2 4 4 6 2
Operating Wavelength (nm) 1260~1650
Insertion Loss without connector (dB) Ma 10. 11.
7.4 13.7 17 21 7.8 14.9 18
(1,2) x 7 4
Ma 11. 11.
Insertion Loss with connector (dB) 7.9 14.2 17.5 21.5 8.3 15.4 18.5
x 2 9
Ma
Loss Uniformity (dB) 0.6 0.9 1.2 1.7 2.5 1.5 1.5 2 2.5
x
Ma
Polarization Dependent Loss (dB) 0.2 0.3 0.3 0.3 0.4 0.2 0.4 0.4 0.4
x
Return Loss (dB) Min 55
Directivity (dB) Min 55
Fibre Type G652.D or G657A1 or G657A2
Connector Type Customer specified

6. Fiber Termination Box

a. Fiber Termination Box 12 cores
This Lockable IP65 distribution box is supplied loaded or unloaded and offers the ability to terminate 12
fibers housed in a strong robust ABS enclosure for indoor and outdoor applications. An internal
detachable tray provides a neat and tidy solution for housing 12 SC simplex connections and splices.
The box has 12 patch cord exit points and up to 2 cable entry points which maintain the IP65 rating.
Integrated cable tie points are included to secure incoming cables. A locking feature for the door adds
extra security when positioned in un-secure area.

Features:
 Up to 12 LGX components in 4U
 19” and 23” Rack mountable
 IP 65 Rating for external use
 Lockable door for added security
 Integrated cable tie points for securing incoming cable
 Up to 12 splice & SC connection points
 Removable splice tray for easy installation
 Accepts loose tube, distribution and pre-terminated cables
 Integrated bend radius protection
 Sealing glands for up to 12 exiting cables + 2 x 6.5mm- 13mm incoming cable
 Removable door for ease of installation
 Supplied with 12 heatshrink splice protectors
 Supplied with transit tubing
 Supplied with wall fixings and tie wraps
 ROHS, REACH & SvHC compliant

Specification:
Element Characteristic
Height (mm) 235
Width (mm) 205
Depth (mm) 60
Net weight (kg) 0.9
Suitable for adaptor type SC Simplex
Number of ports 12
Cable entry 2
Material ABS
Colour Grey RAL 7035
Operating temperature (°C) -40 to +60
TIA/EIA 568.C, ISO/IEC 11801, EN50173,
Designed in accordance with
IEC60304, IEC61754,
Compliant to RoHS, Reach/SVHC

b. Fiber Termination Box 24 cores

This Lockable IP65 distribution box is supplied loaded or unloaded and offers the ability to terminate 24
fibers housed in a strong robust ABS enclosure for indoor and outdoor applications. An internal
detachable tray provides a neat and tidy solution for housing 24 SC simplex connections and splices.
The box has 24 patch cord exit points and up to 2 cable entry points which maintain the IP65 rating.
Integrated cable tie points are included to secure incoming cables. A locking feature for the door adds
extra security when positioned in un-secure areas.

Features:
 IP 65 Rating for external use
 Lockable door for added security
 Integrated cable tie points for securing incoming cable
 Up to 24 splice & SC connection points
 Removable splice tray for easy installation
 Accepts loose tube, distribution and pre-terminated cables
 Integrated bend radius protection
 Sealing glands for up to 24 exiting cables + 2 incoming cable
 Cable entry point allows unbroken cable to be installed(loop)
 Removable door for ease of installation
 Supplied with 24 heatshrink splice protectors
 Supplied with transit tubing
 Supplied with wall fixings and tie wraps
 ROHS, REACH & SvHC compliant

Specification:
Element Characteristic
Height (mm) 340
Width (mm) 270
Depth (mm) 110
Net weight (kg) 1.8
Suitable for adaptor type SC Simplex
Number of ports 24
Cable entry 2
Material ABS
Colour Grey RAL 7035
Operating temperature (°C) -40 to +60
TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304,
Designed in accordance with
IEC61754,
Compliant to RoHS, Reach/SVHC

c. Fiber Termination Box 48 cores

The W32 Lockable IP65 distribution box is supplied unloaded as standard and offers the ability to
terminate 48 fibres housed in a strong robust ABS enclosure for indoor and outdoor applications. An
internal detachable adaptor tray provides a neat and tidy solution for housing 48 SC simplex
connections and splices. Integrated cable tie points are included to secure incoming cables. A locking
feature for the door adds extra security when positioned in un-secure areas.

Features:
 IP 65 Rating for external use
 Lockable door for added security
 Integrated cable tie points for securing incoming cable
 Up to 48 splice & SC connection points
 Removable splice tray for easy installation
 Accepts loose tube, distribution and pre-terminatedcables
 Integrated bend radius protection
 Removable door for ease of installation
 Supplied with 48 heatshrink splice protectors
 Supplied with transit tubing
 Supplied with wall fixings and tie wraps
 ROHS, REACH & SvHC compliant

Specification:
Element Characteristic
Height (mm) 420
Width (mm) 320
Depth (mm) 125
Suitable for adaptor type SC Simplex, LC Duplex
Number of Adaptor Positions 48
Splice Tray Type 48 Cores
Max. Splicing Capacity 96 Splices
Material PC+ABS
Colour White
Operating temperature (°C) -40 to +60
Compliant to RoHS, Reach/SVHC

7. Fiber Wall Outlet

The internal customer outlet box is designed for use inside the home. The box is designed with
integrated shutters to comply with safety standards.
Features:
 Multi cable entry points
 Integrated heatshrink splice holder
 Holds up to 2 single fibers
 multiple cable entries top and bottom
 Integrated fiber management
 Intergrated shutter protects against laser exposure and dust
Specification:
Element Characteristic
Maximum Single Fiber Count 2
Maximum Number of heat splice 2
Number of shuttered outlets 2
Number of cable entre points 8
Height 86mm
Width 86mm
Depth 25mm
Colour White
Material ABS
RoHS Compliant Yes