SS301 series version Q12.19.E05 Sendo SensorTM | Live for the sensor www.pressuresensorsuppliers.

com

SS301 series piezoresistive pressure transmitters for gas and liquid

Features

● CE conformity
● Reverse polarity protection
● Stainless steel 316L diaphragm
● Piezoresistive pressure sensor, oil filled
● All stainless steel structure, NO O-ring inside
● Output signals: 4-20mA and 0.5-4.5V, 0-5V, 0-10V
● A wide range of pressure and electrical connections

GSP 311 3-pin Packard Direct cable DIN43650C M12*1 LED Display

Descriptions

SS301 series piezoresistive pressure sensors take the advantage of piezoresistive technology, are fully media
isolating with stainless steel and no internal elastomer seals. This design often makes them resistant to harsh,
aggressive media and challenging environments. A high performance piezoresistive pressure transducer is
laser welded with the housing, no O-ring, no potential leak problems, high measurement accuracy is provided
through extensive transducer characterization.

SS301 series offer the pressure range of minimum 20kpa and maximum 20mpa(0.2bar to 200bar) for OEM
applications. Numerous options and variants are available, fully adapted to the customer requirements. Typical
application in industrial measurement and environment control.

Technical data

Performance (EN 60770)

Accuracy @25°C ±0.5% F.S.(incl. non-linearity, hysteresis and repeatability)
Non-linearity BFSL (conformity) ±0.3% F.S.
Hysteresis and repeatability ±0.1% F.S.
Response time < 4 ms

Pressure range 0...0.2bar to 200bar(positive pressure)

-1...0bar, -0.2...0bar(negative pressure)
-1...3bar, -1...15bar(compound pressure)
Overload pressure 2.0 × F.S.
Pressure type vented gauge, sealed gauge, absolute
Long term stability ≤0.2%F.S./Year
Temperature coefficient ±0.03%F.S./°C

Sendo Sensor | ISO9001:2008 Page 4 - 1 www.sendo-sensor.com

Unified Social Credit Identifier: 91330226557963373F Registered Address: Bldg. 1#1108, Wante business center, Hi-Tech, 315040 China
SS301 series version Q12.19.E05 Sendo SensorTM | Live for the sensor www.pressuresensorsuppliers.com

SS301 series piezoresistive pressure transmitters for gas and liquid

Electrical specifications

Output signal 4-20mA 0-10V 0-5V/0.5-4.5V 0.5-4.5V

Supply voltage 9-30Vdc 12-30Vdc 9-30Vdc 5Vdc

Polarity protected yes yes yes yes

Short-circuit protected yes yes yes yes

Zero and span adjustment No No No No
Surge protection yes yes yes yes

Environmental conditions
Medium temp range -40°C → +100°C
Ambient temp range -20°C → +80°C(depending on electrical connection)

Compensated temp range 0°C → +70°C

EMC - Emission EN 61000-6-3
EMC - Immunity EN 61000-6-1
Insulation resistance >100 MΩ at 250 V

Mechanical characteristics
Materials Diaphragm Stainless steel 316L(typical) More options see Page 4

Housing Stainless steel 304(typical) Stainless steel 316L(optional)

Pressure connection Stainless steel 304(typical) More options see Page 4

Electrical connection PA66(typical)

Pressure connection See Ordering information in page 4
Electrical connection GSP311, DIN43650C, Direct cable, M12*1, LED Display, 3-pin Packard
Weight 150-300g(depending on pressure connection and electrical connection)

Sealing rating IP 65(fulfilled together with mating connector)

Electrical connections
PIN connections
Wire connections
(GSP311, DIN43650C, 3-pin Packard, M12*1)

4-20mA Pin 1: + supply Pin 2: + output Red: + supply

Current output signal (2 wire) Pin 3: Not used Earth: Not connected Black: + output
Red: + supply
0-10V, 0-5V, 0.5-4.5V Pin 1: + supply Pin 2: GND
Black: GND
Voltage output signal (3 wire) Pin 3: + output Earth: Not connected
Blue: + output

GSP311 DIN43650C 3-pin Packard M12*1

Sendo Sensor | ISO9001:2008 Page 4 - 2 www.sendo-sensor.com

Unified Social Credit Identifier: 91330226557963373F Registered Address: Bldg. 1#1108, Wante business center, Hi-Tech, 315040 China
SS301 series version Q12.19.E05 Sendo SensorTM | Live for the sensor www.pressuresensorsuppliers.com

SS301 series piezoresistive pressure transmitters for gas and liquid

Dimensions(Unit: mm)
Electrical connections

GSP311 DIN43650C 3-pin Packard

Direct cable M12*1 LED display

Housings

Housing(typical)

Pressure connections

G1/2” thread G1/4” thread G1/8” thread

1/2”NPT thread 1/4”NPT thread 1/8”NPT thread

Sendo Sensor | ISO9001:2008 Page 4 - 3 www.sendo-sensor.com

Unified Social Credit Identifier: 91330226557963373F Registered Address: Bldg. 1#1108, Wante business center, Hi-Tech, 315040 China
SS301 series version Q12.19.E05 Sendo SensorTM | Live for the sensor www.pressuresensorsuppliers.com

SS301 series piezoresistive pressure transmitters for gas and liquid

Ordering information

EXAMPLE: SS301 PI 01 A 04 B 06

1 Pressure range(bar) PI
NA(-1...0) NB(-0.7...0) NC(-0.35...0) ND(-0.2...0) PA(0.2) PB(0.35) PC(0.7) PD(1.0)

PE(1.6) PF(2.5) PG(4.0) PH(6.0) PI(10) PJ(16) PK(25) PL(40) PM(60)

PN(100) PO(160) PP(200) CA(-1...0.6) CB(-1...1.5) CC(-1...3) CD(-1...5)

CE(-1...9) CF(-1...15) CG(-1...24)

X(Other pressure range or unit is on request)

2 Pressure type 01
01(Gauge) 02(Absolute)

3 Electrical connection A
A(GSP 311) B(Direct cable) C(M12*1) D(LED Display) E(DIN43650C)

F(3-pin round Packard)

4 Pressure connection 04
01(1/4”NPT) 02(1/2”NPT) 03(1/8”NPT) 04(G1/4”) 05(G1/2”) 06(G1/8”) 07(PT1/4”)

08(PT1/2”) 09(PT1/8”) 10(Other pressure connection is on request)

5 Signal & supply A

A(4-20mA & 9-30Vdc) B(0-10V & 12-30Vdc) C(0-5V & 9-30Vdc) D(0.5-4.5V & 9-30Vdc)

E(0.5-4.5V & 5Vdc)

6 Cable length 06
01(1m) 02(2m) 03(3m) 04(4m) 05(5m) 06(None) 07(Other length is on request)

Optional(please contact us for more details)

1 Pulse snubber
A(YES) B(NO)

2 Material of diaphragm
01(Titanium) 02(Tantalum) 03(Hastelloy-C)

3 Material of pressure connection

A(Titanium) B(Tantalum) C(Hastelloy-C) D(Stainless steel 316L)

Contact us

Company Ningbo Sendo Electronic Technology CO., LTD

Email [email protected]
Email [email protected]

Factory Floor 5, building 2, no.48 jiuhuan road, jianggan district, 310019 China
Office Building. 1#1108, Wante business center, Hi-Tech, 315040 China
Website http:/www.pressuresensorsuppliers.com http://www.sendo-sensor.com
Skype: sendosensor We Chat: chenjie4884 WhatsApp: +8613616574884
Tel: 0086-0574-27725960 Fax: 0086-0574-27725970 Phone: 0086-13616574884
*Specifications subject to change without notice, the latest date sheet please contact: [email protected]

Sendo Sensor | ISO9001:2008 Page 4 - 4 www.sendo-sensor.com

Unified Social Credit Identifier: 91330226557963373F Registered Address: Bldg. 1#1108, Wante business center, Hi-Tech, 315040 China