JGAURORA Z-603S User Manual 201704 PDF

JGAURORA 3D Printer
Model:Z-603S
Operation Instruction
www.jgaurora3d.com
Read it carefully before printing
- 0 - and keep it properly.
Shenzhen Aurora Technology Co.,Ltd. ----3D printer operation instruction
CONTENTS
Introduction …………………………………………………… - 2 -
-1-
INTRODUCTION
Z- 603S model is designed FDM 3d printer by Shenzhen Aurora

Technology Co., Ltd, which could print the plastic models that you
drawn.
characteristics: CNC laser cutting Metal body, transmit by belt
and screw rod ,linear bear in X-Y-Z axis,which construction make
printing much more table and high precision with less shake.
Special note:
1. All content in this manual is strictly checked, if any printing errors
or misunderstandings on the content, Shenzhen Aurora reserves
the rights of interpretation.
2. Any update information, will not notify.
-2-
A,Security Considerations
Please read below items, in case of damage and danger.
Do not touch the extruder and hot bed, when machine

working, temp. of extruder will be about 200 centigrade, hot
bed could be 110 centigrade.
Do not put your hand into machine when printing, in case

of crushing.
The power supply use 110V-220V~50HZ alternating current,

the tripod socket must be grounded, don’t add another power, in
case of fire or electric shock.
We suggest you wear safety goggles when tear off supports
of models.
Put the machine at a drafty room, some smells from

the material may let you uncomfortable, especially ABS
material.
-3-
B.PRODUCT DETAILS
1.Specifications
Model：Z-603S Nozzle diameter： 0.4mm
Layer thickness：0.1-0.3mm Machine size： 480*365*410mm
Printing speed：10-300mm/s Machine weight：17KG
XY axis position accuracy：0.05mm Packing size：580*460*510mm
Z axis position accuracy：0.015mm Gross weight：20KG
Printing material：ABS,PLA,TPU,PA Build size：280*180*180mm
Material tendency：PLA LCD screen：Yes
Filament diameter ：1.75mm Offline printing：USB
Software language：Multi-Language File format：STL、G-Code、OBJ
Function of support：automatically OS：windows(linux、mac)

Working condition：10-30℃，Humidity
Software： Cura
20-50%
2.Name of machine parts
Extruder
XY Axis
Hotbed
Frame
LCD display
Z axis
Rotary button
USB cable port

LCD Switch
Fan switch Pic. 1 SD card port
-4-
3.Extruder drawing
Pic. 2
Pic.3
Pic.3
4.Tool list
Pic. 4
-5-
C.CURA SOFTWARE
1、Cura14.07 installation
a.Where can I find the software ?
1).SD card with shipment ; 2).download from internet；
b.installation process
1).From SD card with shipment
Insert SD card and open the file
Pic. 5
Pic. 6
Pic. 7
2).Download from internet
Official website：https://ultimaker.com/en/cura-software/list
-6-
Select the right version as per your company system
Pic. 8
b.Software installation process
Double click and follow the steps to install it
Pic.9
-7-
Pic.10
Pic.11
-8-
Pic.12
Pic.13
-9-
Pic.14
Pic.15
- 10 -
Pic.16
Pic.17
- 11 -
Pic.18
Max build size

Pic.19
- 12 -
Click OK
Pic. 20
Pic.21
- 13 -
Configurations loading as per below 1->2 step
Open configuration file
Pic. 22
Position of configuration file：Computer/SD card)/Software/installation file/myamps1.4.ini

（suggestion :keep this file copy to your computer）
SD card you keep
Pic. 23
- 14 -
After Loading, the basic and advanced configuration will be changed to the
Z-603S regular printing configuration.
Pic.24
Set “ print all at once”.
Pic.25
- 15 -
2.Cura software setting
Layer height setting
Pic. 26
Pic. 27
- 16 -
pic. 28
Pic. 29
- 17 -
Pic. 30
Speed and temperature setting
Pic. 31
- 18 -
Pic.32
Pic .33
- 19 -
Pic 34
Pic. 35
- 20 -
Pic. 36
Pic. 37
- 21 -
Basic setting of model in the software
Pic.38
Pic.39
- 22 -
Pic.40
Pic.41
- 23 -
Pic.42
Pic.43
- 24 -
1,Software expert mode
Pic.44
Pic.45
- 25 -
Pic.46
Pic.47
- 26 -
Pic.48
Pic.49
- 27 -
Pic.50
Pic.51
- 28 -
Pic.52
- 29 -
C Printer Operating
1. LCD display interface
Pic.53
Pic.53
- 30 -
2、Platform leveling：
A，press rotation button choice“Prepare”-“Auto”，let all axis go to home point；
B，when motor stop，twist rotation button choice“Prepare”-“Disable steppers”
- 31 -
C，move extruder on top of platform by hand, check the distance between platform and nozzle；
D ， put one A4 paper on printing area and let it under nozzle, when move A4 paper
should have little friction force.：
If too loose，mean too far，twist screw anti clockwise direction；
If too tight, mean too close, twist screw clockwise direction；
Check four corners of the distance.
- 32 -
E，after adjust , A4 can be withdrawn with little friction force. The distance between
nozzle and platform is about 0.15mm, move extruder will not scratch platform.
- 33 -
3. Filament Feeding
Press button-->Prepare-->Preheat PLA
Pic.54
Pic.55
- 34 -
Put filament to filament

holder
Pic.54
Filament pass this tube
to extruder
Pic.56
Cut a small bevel angle at the

tip of filament
Pic. 57
Straighten the filament and Insert it into feeding

hole,press the lock(nut)down by another hand.
Pic .58
- 35 -
Pic. 61
After filament loaded,

press filament make it
come out from nozzle
evenly
Pic.60
Filament changed notice：
- 36 -
4.Printing
（1）Offline printing by SD card
Pic. 66
G-code generating
Pic.67
- 37 -
Pic.68
Pic.69
- 38 -
Printing:
Pic.70
Select “Print from SD” from LCD display---Select the gcode you want to print
(such as : 123.gcode). then press the rotary button, the printer will
automatically work up. It will heat up to the temp. which been setted in the slice
software , Remark: The distance between nozzle and platform is one of the
most important factor that effects printing result.
a. Far distance: Fine round , uneven, gap and tilt . In this case, printed model
will be not good and uneasy to move.shown as picture:
Pic. 71
- 39 -
b,Close distance: the path is too flat and the side of path is upwrap,
what’s more, it will damage the nozzle, shown as pic 72.
Pic. 72
c,Right distance：Flat skinning, gapless, shown as picture 73
Pic. 73
（2） Online printing by USB cable
- 40 -
Pic.74
Pic.75
Modifying Serial port Number（ Serial port is according to computer）
and Baudrate setting(115200).
B,Online printing
Pic. 76
Click print
Extruder and hotbed is

heating
- 41 -
Pic. 77
The progress of printing

Printing
Pic. 78
- 42 -
E,FAQ and Solutions

Extruder Plugged
Tip: Electric fan should be took off before doing maintenance as picture shown
Situation A: only little filament leave down and cannot pull out
Pic.79
- 43 -
Push filament by hand for a little bit,

then press the lock(nut) down by another hand,
and pull it out rapidly
Pic. 80
Situation B: filament do not feed into feeding mouth
Keep heating, use allen wrench to dismantle fan and heat sank
part,and use smallest hexagon wrech in tool box(as picture) to
press the remain filament till it out from nozzle competely
Pic.81
- 44 -
Pic.82
Pic.83
- 45 -
Problems description Reason Solution
2 slip Filament is too thin Cut the thin filament
3 Temp. Is unusual Broken temp.sensor Change the sensor

4
Different shape as STL Motor Pulley Screw loose Check and Lock the screws
5
The model is warped The hot bed is not at a level Adjust hot bed level
Wrong setting or Choose the right machine type

6 G-code gerating failed
wrong save path and change the right path
7 Software Installation failed Different OS Reset OS
- 46 -
F,MAITENANCE
Important maintenance tips：
a. maintenance of X,Y,Z axis: Add some lubricants on the rods to reduce friction
when the machine works noisy and a little bit shake
b. Please refer to the USER MANUAL before printing, do preparation of hot bed
adjustment first.
c. When finished printing, the filament should keep sealing, avoid moisture.
d. Preheat the extruder at the beginning of 2nd time printing, let extruder
auto-push filament for a while.
e. Machine should do some regular maintenance, drop some lubricating oil on thread
rod, polished rod and bearings to avoid fatigue wear.
f. Do not let the fan and air-condition blow to the hot bed when printing.
g. Keep the working condition at “Temp:10-30℃，Humidity:20-70%”.
- 47 -
G,AFTER SALES SERVICE
Shenzhen Aurora Technology Co.,Ltd.

Add:5F,No.17th.Chiling Rd Chiling County,Gaofeng community,Dalang street,Longhua District,Shenzhen, China 518109
Website: www.jgaurora3d.com
- 48 -

JGAURORA Z-603S User Manual 201704 PDF

Uploaded by

Copyright:

Available Formats

JGAURORA Z-603S User Manual 201704 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

JGAURORA Z-603S User Manual 201704 PDF

Uploaded by

Copyright:

Available Formats

JGAURORA 3D Printer

Z- 603S model is designed FDM 3d printer by Shenzhen Aurora

or misunderstandings on the content, Shenzhen Aurora reserves

the rights of interpretation.

2. Any update information, will not notify.

Please read below items, in case of damage and danger.

Do not touch the extruder and hot bed, when machine

Do not put your hand into machine when printing, in case

The power supply use 110V-220V~50HZ alternating current,

We suggest you wear safety goggles when tear off supports

Put the machine at a drafty room, some smells from

Model：Z-603S Nozzle diameter： 0.4mm

Layer thickness：0.1-0.3mm Machine size： 480*365*410mm

Printing speed：10-300mm/s Machine weight：17KG

XY axis position accuracy：0.05mm Packing size：580*460*510mm

Z axis position accuracy：0.015mm Gross weight：20KG

Printing material：ABS,PLA,TPU,PA Build size：280*180*180mm

Material tendency：PLA LCD screen：Yes

Filament diameter ：1.75mm Offline printing：USB

Software language：Multi-Language File format：STL、G-Code、OBJ

Function of support：automatically OS：windows(linux、mac)

USB cable port

Fan switch Pic. 1 SD card port

a.Where can I find the software ?

1).SD card with shipment ; 2).download from internet；

1).From SD card with shipment

Insert SD card and open the file

2).Download from internet

Select the right version as per your company system

b.Software installation process

Double click and follow the steps to install it

Max build size

Configurations loading as per below 1->2 step

Open configuration file

Position of configuration file：Computer/SD card)/Software/installation file/myamps1.4.ini

SD card you keep

Z-603S regular printing configuration.

Set “ print all at once”.

2.Cura software setting

Layer height setting

Speed and temperature setting

Basic setting of model in the software

1,Software expert mode

1. LCD display interface

A，press rotation button choice“Prepare”-“Auto”，let all axis go to home point；

B，when motor stop，twist rotation button choice“Prepare”-“Disable steppers”

Press button-->Prepare-->Preheat PLA

Put filament to filament

Cut a small bevel angle at the

Straighten the filament and Insert it into feeding

After filament loaded,

Filament changed notice：

（1）Offline printing by SD card

most important factor that effects printing result.

will be not good and uneasy to move.shown as picture:

what’s more, it will damage the nozzle, shown as pic 72.

and Baudrate setting(115200).

Extruder and hotbed is

The progress of printing

Layer thickness：0.1-0.3mm Machine size： 480365410mm

XY axis position accuracy：0.05mm Packing size：580460510mm

Printing material：ABS,PLA,TPU,PA Build size：280180180mm