See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/336304966

basics of solar PV system

Presentation · October 2019

DOI: 10.13140/RG.2.2.10829.59363

CITATIONS READS

0 13,443

1 author:

Jama Adam Salah

Kocaeli University
21 PUBLICATIONS   10 CITATIONS   

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Introduction to electric power system planning View project

KAMPALA CAMPUS Evaluation of PGDIMATHE Program at IUIU Kampala Campus using CIPP Model during the academic View project

All content following this page was uploaded by Jama Adam Salah on 07 October 2019.

The user has requested enhancement of the downloaded file.

 Agenda

Introduction
Photovoltaic effect
Electron-hole formation
A solar panel (or) solar array
Types of Solar cell
Principle, construction and working of
Solar cell
Advantage, disadvantage and
application
Presenting by: Eng. Jama Adam 1
Solar cell: Solar cell is a photovoltaic device that converts
the light energy into electrical energy based on
the principles of photovoltaic effect
Recap (Lecture-1) : Photo means light in Greek and Volt is the name of a
pioneer in the study of electricity Alessandro Volta
Albert Einstein was awarded the 1921 Nobel Prize in physics
for his research on the photoelectric effect—a phenomenon
central to the generation of electricity through solar cells.
In the early stages, the solar cell was developed only with 4 to
6 % efficiency( because of inadequate materials and problems
in focusing the solar radiations). But, after 1989, the solar cells
with more than 50% efficiency was developed.
2
 Three generations of solar cells

First Generation

First generation cells consist of large-area, high quality

and single junction devices.
First Generation technologies involve high energy and
labour inputs which prevent any significant progress in
reducing production costs.

3
 Second Generation

Second generation materials have been developed to

address energy requirements and production costs of
solar cells.

Alternative manufacturing techniques such as vapour

deposition and electroplating are advantageous as they
reduce high temperature processing significantly

4
 Materials for Solar cell

Solar cells are composed of various semiconducting materials

1. Crystalline silicon
2. Cadmium telluride
3. Copper indium diselenide
4. Gallium arsenide
5. Indium phosphide
6. Zinc sulphide

Note: Semiconductors are materials, which become

electrically conductive when supplied with light or heat, but
which operate as insulators at low temperatures

5
 Materials for Solar cell
• Over 95% of all the solar cells produced worldwide are
composed of the semiconductor material Silicon (Si). As the
second most abundant element in earth`s crust, silicon has
the advantage, of being available in sufficient quantities.
• To produce a solar cell, the semiconductor is contaminated
or "doped".
• "Doping" is the intentional introduction of chemical
elements into the semiconductor.

• By doing this, depending upon the type of dopant, one can

obtain a surplus of either positive charge carriers (called
p-conducting semiconductor layer) or negative charge
carriers (called n-conducting semiconductor layer).
6
 Materials for Solar cell
• If two differently contaminated semiconductor layers are
combined, then a so-called p-n-junction results on the
boundary of the layers.
p-n junction layer

n-type semiconductor

p- type semiconductor

• By doping trivalent element, we get p-type semiconductor.

(with excess amount of hole)

• By doping pentavalent element, we get n-type

semiconductor ( with excess amount of electron)

7
 2. Photovoltaic effect

Light
Definition: energy
The generation
of voltage across the
PN junction in a
semiconductor due n-type semiconductor
to the absorption of Electrical
Power
light radiation is p- type semiconductor
called photovoltaic
effect. The Devices
based on this effect
p-n junction
is called photovoltaic
device.
8
 3. Electron-hole formation

• Photovoltaic energy conversion relies on the number

of photons strikes on the earth. (photon is a flux of
light particles)
• On a clear day, about 4.4 x 1017 photons strike a square
centimeter of the Earth's surface every second.
• Only some of these photons - those with energy in
excess of the band gap - can be converted into
electricity by the solar cell.
• When such photon enters the semiconductor, it may
be absorbed and promote an electron from the
valence band to the conduction band.
9
 2. Photovoltaic effect
Conduction band

electron

Photons

hole
Valence band

• Therefore, a vacant is created in the valence band and it is

called hole.
• Now, the electron in the conduction band and hole in
valence band combine together and forms electron-hole pairs.
10
 4. A solar panel (or) Solar array

Single solar cell

• The single solar cell constitute the n-typpe layer
sandwiched with p-type layer.
• The most commonly known solar cell is configured as a
large-area p-n junction made from silicon wafer.
• A single cell can produce only very tiny amounts of electricity
• It can be used only to light up a small light bulb or power a
calculator.
• Single photovoltaic cells are used in many small electronic
appliances such as watches and calculators
11
4. A solar panel (or) Solar array

Single Solar cell

N-type

P-type

12
 4. A solar panel (or) Solar array
Solar panel (or) solar array (or) Solar module
The solar panel (or) solar array is the interconnection of
number of solar module to get efficient power.
• A solar module consists of number of interconnected
solar cells.
• These interconnected cells embedded between two
glass plate to protect from the bad whether.
• Since absorption area of module is high, more energy
can be produced.

13
4. A solar panel (or) Solar array

14
 5.Types of Solar cell
Based on the types of crystal used, soar cells can be classified as,
1. Monocrystalline silicon cells
2. Polycrystalline silicon cells
3. Amorphous silicon cells
1. The Monocrystalline silicon cell is produced from
pure silicon (single crystal). Since the Monocrystalline
silicon is pure and defect free, the efficiency of cell will be
higher.
2. In polycrystalline solar cell, liquid silicon is used as raw material
and polycrystalline silicon was obtained followed by solidification
process. The materials contain various crystalline sizes. Hence,
the efficiency of this type of cell is less than Monocrystalline cell.

15
 5.Types of Solar cell

3. Amorphous silicon was obtained by depositing silicon

film on the substrate like glass plate.

•The layer thickness amounts to less than 1µm – the

thickness of a human hair for comparison is 50-100 µm.

•The efficiency of amorphous cells is much lower than that

of the other two cell types.

• As a result, they are used mainly in low power

equipment, such as watches and pocket calculators,
or as facade elements.
16
 5.Types of Solar cell

Comparison of Types of solar cell

Material Efficiency (%)

Monocrystalline silicon 14-17

Polycrystalline silicon 13-15

Amorphous silicon 5-7

17
 6.Principle, construction and working of Solar cell

Principle: The solar cells are based on the principles

of photovoltaic effect.The photovoltaic effect is the
photogeneration of charge carriers in a light absorbing
materials as a result of absorption of light radiation.
Construction
• Solar cell (crystalline Silicon) consists of a n-type
semiconductor (emitter) layer and p-type semiconductor
layer (base). The two layers are sandwiched and hence
there is formation of p-n junction.
• The surface is coated with anti-refection coating to avoid the
loss of incident light energy due to reflection.
18
6.Principle, construction and working of Solar cell

19
6.Principle, construction and working of Solar cell

20
6.Principle, construction and working of Solar cell
• A proper metal contacts are made on the n-type and p-
type side of the semiconductor for electrical connection
Working:
• When a solar panel exposed to sunlight , the light energies
are absorbed by a semiconduction materials.
• Due to this absorded enrgy, the electrons are libereted
and produce the external DC current.
• The DC current is converted into 240-volt AC current using
an inverter for different applications.

21
 Mechanism
First, the sunlight is absorbed by a solar cell in a solar
panel.
• The absorbed light causes electrons in the material to
increase in energy. At the same time making them free to
move around in the material.
• However, the electrons remain at this higher energy for
only a short time before returning to their original lower
energy position.
• Therefore, to collect the carriers before they lose the
energy gained from the light, a PN junction is typically
used.

22
 Mechanism
• A PN junction consists of two different regions of a
semiconductor material (usually silicon), with one side
called the p type region and the other the n-type region.
• During the incident of light energy, in p-type material,
electrons can gain energy and move into the n-type region.
• Then they can no longer go back to their original low
energy position and remain at a higher energy.
• The process of moving a light- generated carrier from
p-type region to n-type region is called collection.
• These collections of carriers (electrons) can be either
extracted from the device to give a current, or it can remain in
the device and gives rise to a voltage. 23
 Mechanism

• The electrons that leave the solar cell as current give

up their energy to whatever is connected to the solar
cell, and then re-enter the solar cell. Once back in the
solar cell, the process begins again:

24
 Mechanism
The mechanism of electricity production- Different stages

Conduction band High density

Valence band Low density

The above diagram shows the formation of p-n junction in a solar

cell. The valence band is a low-density band and conduction
band is high-density band. 25
 Mechanism
Stage-1
When light falls on the semiconductor surface, the electron
from valence band promoted to conduction band.
Therefore, the hole
(vacancy position left Conduction band High density
by the electron in the
valence band) is
generates. Hence, there
E
is a formation of
electron-hole pair on
the sides of p-n
Valence band Low density
junction.
26
 Mechanism

Stage-2
In the stage 2, the electron and holes are diffuse across the
p-n junction and there is a formation of electron-hole pair.

Conduction band High density

junction
E

Valence band Low density

27
 Mechanism
Stage-3
In the stage 3, As electron continuous to diffuse, the negative
charge build on emitter side and positive charge build on the
base side.

Conduction band High density

junction
E

Valence band Low density

28
 Mechanism
Stage-4
When the PN junction is connected with external circuit, the
current flows.

Conduction band High density

junction
E

Valence band Low density Power

29
7.Advantage, disadvantage and application of Solar cell

Advantage
1. It is clean and non-polluting
2. It is a renewable energy
3. Solar cells do not produce noise and they are totally
silent.
4. They require very little maintenance
5. They are long lasting sources of energy which can be
used almost anywhere
6. They have long life time
7. There are no fuel costs or fuel supply problems
30
7.Advantage, disadvantage and application of Solar cell

Disadvantage

1. Solar power can be obtained in night time

2. Solar cells (or) solar panels are very expensive

3. Energy has not be stored in batteries

4. Air pollution and whether can affect the production

of electricity
5. They need large are of land to produce more
efficient power supply
31
7.Advantage, disadvantage and application of Solar cell
Applications
1.Solar pumps are used for water supply.
1.Domestic power supply for appliances include
refrigeration, washing machine, television and lighting
1.Ocean navigation aids: Number of lighthouses and
most buoys are powered by solar cells
1.Telecommunication systems: radio transceivers on
mountain tops, or telephone boxes in the country can
often be solar powered
1.Electric power generation in space: To providing
electrical power to satellites in an orbit around the Earth
32
View publication stats