Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    SHT-03 Heat Pipe Demostrator

    Uploaded by

    SUPERB TECH
    This document provides information about a Heat Pipe Demonstrator apparatus manufactured by Superb Technologies. The apparatus consists of three identical pipes - a heat pipe, copper pipe, and stainless steel pipe. One end of each pipe is heated electrically while the other end has a small heat sink tank. The temperature distribution and heat transfer properties of the three pipes can be measured and compared, demonstrating the superior thermal conductivity of the heat pipe. The apparatus is used to study and compare the temperature over time response and temperature distribution along the length of the different pipes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SHT-03 Heat Pipe Demostrator

    Uploaded by

    SUPERB TECH
    18 views1 page
    This document provides information about a Heat Pipe Demonstrator apparatus manufactured by Superb Technologies. The apparatus consists of three identical pipes - a heat pipe, copper pipe, and stainless steel pipe. One end of each pipe is heated electrically while the other end has a small heat sink tank. The temperature distribution and heat transfer properties of the three pipes can be measured and compared, demonstrating the superior thermal conductivity of the heat pipe. The apparatus is used to study and compare the temperature over time response and temperature distribution along the length of the different pipes.

    Original Title

    SHT-03 Heat pipe Demostrator

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a Heat Pipe Demonstrator apparatus manufactured by Superb Technologies. The apparatus consists of three identical pipes - a heat pipe, copper pipe, and stainless steel pipe. One end of each pipe is heated electrically while the other end has a small heat sink tank. The temperature distribution and heat transfer properties of the three pipes can be measured and compared, demonstrating the superior thermal conductivity of the heat pipe. The apparatus is used to study and compare the temperature over time response and temperature distribution along the length of the different pipes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views1 page

    SHT-03 Heat Pipe Demostrator

    Uploaded by

    SUPERB TECH
    This document provides information about a Heat Pipe Demonstrator apparatus manufactured by Superb Technologies. The apparatus consists of three identical pipes - a heat pipe, copper pipe, and stainless steel pipe. One end of each pipe is heated electrically while the other end has a small heat sink tank. The temperature distribution and heat transfer properties of the three pipes can be measured and compared, demonstrating the superior thermal conductivity of the heat pipe. The apparatus is used to study and compare the temperature over time response and temperature distribution along the length of the different pipes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    SUPERB TECHNOLOGIES

    AN ISO 9001:2008 CERTIFIED CO.


    MANUFACTURER & SUPPLIER OF ENGINEERING LAB EQUIPMENT
    Add. – 80 INDUSTRY AREA, AMBALA CANTT, HARYANA.(133001)
    CONTACT NO. – 09896915524
    E-mail : [email protected] : website : www.superbtechnologies.co.in

    Heat Pipe Demonstrator (SHT-03)

    GENERAL DISCRIPTION

    It is a super-conducting device and involves the transfer of heat by boiling and


    condensation of a fluid and hence transfer of heat takes place under nearly
    isothermal condition.
    In this apparatus the comparison of heat pipe with the copper pipe as good
    conductor of heat and with the stainless steel pipe as same material of
    construction is made. It consists of three identical cylindrical conductors in
    respect of geometry. One end of these is heated electrically while there are
    small capacity tanks acting as heat sinks at the other end. The unit consists of
    a heat pipe, a copper pipe and a stainless steel pipe. The performance of the
    heat pipe as a super-conducting device can be studied well in terms of the
    temperature distribution along the length at a given instant and can be
    compared with other two members. Nearly isothermal temperature
    distribution and fast rise of temperature in heat sink tank reveals the heat pipe
    superiority over the conventional conductors.

    EXPERIMENTATION
     To demonstrate the super thermal conductivity of Heat Pipe and to compare its working with best
    conductor i.e. Copper pipe & Stainless steel pipe as same material of construction.
     To plot the temperature v/s time response of pipes.
     To plot the temperature distribution along the length of pipes.
    .

    SPECIFICATIONS SERVICES REQUIRED

     Pipes : 1st : Heat pipe made of stainless steel  Electricity Supply: 1 Phase, 220
    2nd: Made of copper. V AC, 2 Amp.
    3rd: Made of Stainless steel  Table for set-up support.
    Size: 32mm dia, 350 mm length (Approx.)
     Heat Sink: Material Stainless steel.
     Working fluid in heat pipe: Distilled water.
     Heaters: Nichrome Wire Band Type.
     Control panel comprising of
    Digital Voltmeter: 0-300 Volts.
    Digital Ammeter: 0-2 Amp.
    Variac : 0-230 V, 4 Amp.
    Digital Temp. Indicator: 0-2000C, with multi-channel switch
    Temperature Sensors: RTD PT-100 type.
    With standard make on/ off switch, Mains Indicator etc.
     Instruction Manual : An ENGLISH instruction manual will be provided along
    with the Apparatus
     The whole set-up is mounted on a Powder Coated Base plate

     Specifications subject to change without any prior notices , due to convenience of product improvement.

    You might also like