Scribd Logo
Upload

Welcome to Scribd!

  • 57 views

    KCHT-013: Finned Tube Heat Exchanger

    Uploaded by

    Ashish Verma
    The document describes a finned tube heat exchanger apparatus used to study heat transfer. The apparatus contains an inner stainless steel tube with longitudinal fins on the outside that is surrounded by an outer tube. Hot water flows through the inner tube while cold water flows through the outer tube. Sensors measure the inlet and outlet temperatures of both fluids. Utilities required include a water supply and electricity. The apparatus is used to calculate heat transfer metrics like the log mean temperature difference and overall heat transfer coefficient.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    KCHT-013: Finned Tube Heat Exchanger

    Uploaded by

    Ashish Verma
    57 views1 page
    The document describes a finned tube heat exchanger apparatus used to study heat transfer. The apparatus contains an inner stainless steel tube with longitudinal fins on the outside that is surrounded by an outer tube. Hot water flows through the inner tube while cold water flows through the outer tube. Sensors measure the inlet and outlet temperatures of both fluids. Utilities required include a water supply and electricity. The apparatus is used to calculate heat transfer metrics like the log mean temperature difference and overall heat transfer coefficient.

    Original Description:

    Finned

    Original Title

    Finned

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a finned tube heat exchanger apparatus used to study heat transfer. The apparatus contains an inner stainless steel tube with longitudinal fins on the outside that is surrounded by an outer tube. Hot water flows through the inner tube while cold water flows through the outer tube. Sensors measure the inlet and outlet temperatures of both fluids. Utilities required include a water supply and electricity. The apparatus is used to calculate heat transfer metrics like the log mean temperature difference and overall heat transfer coefficient.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    57 views1 page

    KCHT-013: Finned Tube Heat Exchanger

    Uploaded by

    Ashish Verma
    The document describes a finned tube heat exchanger apparatus used to study heat transfer. The apparatus contains an inner stainless steel tube with longitudinal fins on the outside that is surrounded by an outer tube. Hot water flows through the inner tube while cold water flows through the outer tube. Sensors measure the inlet and outlet temperatures of both fluids. Utilities required include a water supply and electricity. The apparatus is used to calculate heat transfer metrics like the log mean temperature difference and overall heat transfer coefficient.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    KCHT-013

    FINNED TUBE HEAT EXCHANGER

    DESCRIPTION :
    Heat exchangers are widely used in various industries. Finned tube Heat Exchanger is a Tube-in-tube
    type heat exchanger. The inner tube is of Stainless steel with fins on its outside surface. Hot water flows
    through inner tube and cold fluid flows through the outer tube. The flow rate of hot & cold fluid is
    measured with the help of rotameters. Inlet and outlet temperatures of fluids are measured with the help
    of digital temperature indicators. A magnetic drive pump is used to circulate the hot water from a re-
    cycled type water tank, which is fitted with heaters and Digital Temperature Controller.

    EXPERIMENTATION:
    To calculate the LMTD.
    To find Heat transfer rate
    To find out overall heat transfer co-efficient.

    UTILITIES REQUIRED :

    Water supply 10 lit/min (approx.)


    Floor Drain.
    Electricity Supply: 1 Phase, 220 V AC, 5 kW.
    Floor area of 1.75 m x 1m.

    TECHNICAL DETAILS :
    System : Water to Water, concentric tube type
    Inner Tube : Dia 32 mm approx., Length 500mm.
    (Made of Stainless Steel)
    Longitudinal Fins : Width 20mm, Length 500mm, 6 Nos.
    (Made of Stainless Steel)
    Water Flow Measurement : Rotameters for hot and cold fluid
    Hot Water Tank : Made of Stainless steel Double Wall, insulated with ceramic
    Wool.
    Hot Water Circulation : Magnetic Pump made of Polypropylene to circulate Hot
    water Maximum working temperature is 85C.
    Heaters : 2 kW Nichrome wire heater (2 Nos.)
    Control panel comprising of:
    Digital Temp. Controller : 0199.9C. (For Hot Water Tank)
    Digital Temp. Indicator : 0-199.9C, with multi-channel switch
    Temperature sensors : RTD PT-100 type-5Nos.
    With Standard make On/Off switch, Mains Indicator etc.
    An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be
    provided along with the Apparatus
    The whole set-up is well designed and arranged on a rigid structure painted with industrial PU
    Paint.

    HEAT TRANSFER LABORATORY K.C. ENGINEERS PVT. LTD., Ambala Cantt, Haryana (INDIA).
    PS KCHT-013 : 04 : 0114 e-mails : [email protected]; [email protected]
    Specification subject to change without notice website : www.kcengineers.com; www.kcengineers.tradeindia.com
    Photograph is only for reference, final product may vary from it. AN ISO 9001 : 2008 CERTIFIED COMPANY

    You might also like