Yamaha Nmax 155 - Coolant Temperature Meter

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

UB1TE0E0.

book Page 4 Monday, September 9, 2019 4:44 PM

Instrument and control functions


EAU86860 EAU86870
10 seconds) all segments other
Coolant temperature meter VVA indicator
than the VVA indicator will start
1 flashing. Now release the “MENU”
switch.
1 4. Push the “MENU” switch once to
change the on or off setting.
5. Push the “MENU” switch for 1
second to confirm the setting.
TIP
Turning the VVA indicator off does not
1. Coolant temperature meter 1. VVA (variable valve actuation) indicator turn off the variable valve actuation
system. 6
This meter shows the temperature of This model is equipped with variable
the coolant, and thereby the condition valve actuation (VVA) for good fuel EAU86880

of the engine. The segments come on economy and acceleration in both the Multi-function display
from “C” (cold) to “H” (hot) as the en- low-speed and high-speed ranges.
gine temperature increases. If the hot The VVA indicator comes on when the
segment flashes, stop the engine as variable valve actuation system has
soon as possible, and let the engine switched to the high-speed range.
cool. (See page 9-36.)
To turn the VVA indicator on or off
TIP
1. Turn the vehicle off.
If a problem is detected in the electrical
2. While pushing the “MENU”
circuit, all segments will flash repeat-
switch, turn the vehicle on. 1
edly. Have a Yamaha dealer check the
3. Continue pushing the “MENU” 1. Multi-function display
vehicle.
switch. The display unit setting
screen will come on (after 5 sec- The multi-function display is equipped
onds), and after that (an additional with the following:
 an odometer (ODO)
6-4

You might also like