Scribd Logo
Upload

Welcome to Scribd!

  • 87 views

    Assingment No.1 EEE 306

    Uploaded by

    ashish mathur
    This document contains 10 questions about DC generators and motors. The questions cover topics like calculating speed, induced EMF, torque, power, and resistance values given various machine parameters and operating conditions like load, current, voltage, and speed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Assingment No.1 EEE 306

    Uploaded by

    ashish mathur
    87 views2 pages
    This document contains 10 questions about DC generators and motors. The questions cover topics like calculating speed, induced EMF, torque, power, and resistance values given various machine parameters and operating conditions like load, current, voltage, and speed.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 10 questions about DC generators and motors. The questions cover topics like calculating speed, induced EMF, torque, power, and resistance values given various machine parameters and operating conditions like load, current, voltage, and speed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    87 views2 pages

    Assingment No.1 EEE 306

    Uploaded by

    ashish mathur
    This document contains 10 questions about DC generators and motors. The questions cover topics like calculating speed, induced EMF, torque, power, and resistance values given various machine parameters and operating conditions like load, current, voltage, and speed.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Home assignment I (Electrical Machines-I, EEE 306, B.

    Tech 3rd EEE)


    Q.1 A four-pole DC shunt generator with a wave wound armature having 390 conductors has to supply
    a load of 500 lamps each of 100 W at 250 V. Allowing 10 V for the voltage drop in the connecting
    leads between the generator and the load and brush drop of 2 V. Calculate the speed at which the
    generator should be driven. The flux per pole is 30 m Wb and the value of Ra = 0·05 Ω and Rsh = 65
    Ω.
    Q.2 A load of 7.5 kW at 230V is supplied by a short-shunt cumulatively compound DC generator. If
    the armature, series and shunt field resistances are 0·4, 0·3 and 100 ohm respectively. Calculate the
    induced emf and the load resistance.
    Q.3 A DC generator is connected to 220 V DC mains. The current delivered by the generator to the
    mains is 100 A. The armature resistance is 0.1 ohm. The generator is driven at a speed of 500 rpm
    Calculate (i) the induced emf (ii) the electromagnetic torque (iii) the mechanical power input to the
    armature neglecting iron, winding and friction losses, (iv) Electrical power output from the armature
    (v) armature copper loss
    Q.4 A 250 kW, 500 V, 4 pole lap wound armature has 720 conductors. It is given a brush lead of 3°
    mechanical from its geometrical neutral axis (GNA). Calculate demagnetising and cross magnetising
    ampere-turns per pole. Neglect shunt field current.

    Q.5 A 250 V, 10 kW, 8 pole DC generator has single turn coils. The armature is wave-wound with 90
    commutator segments. If the brushes are shifted by 2 commutator segments at full-load, calculate(i)
    total armature reaction ampere-turns (ii) demagnetising ampere-turns and (iii) cross-magnetising
    ampere-turns.

    Q.6 A 240 V DC shunt motor has a field resistance of 400 ohm and an armature resistance of 0.1 ohm.
    The armature current is 50 A and the speed is 1000 rpm Calculate the additional resistance in the field
    to increase the speed to 1200 rpm Assume that armature current remains the same and the
    magnetisation curve to be a straight line

    Q.7 A 200 V shunt motor has Ra = 0.1 ohm, Rf = 240 ohm and rotational loss = 236 W. On full load
    the line current is 9.8 A with the motor running at 1450 rpm. Determine
    (a) the mechanical power developed
    (b) the power output
    (c) the load torque (d) the full load efficiency

    Q.8 A fan motor whose torque is proportional to the square of the speed is driven by a separately
    excited DC motor. The motor draws a current of 8 A at 120 V and runs at a speed of 500 rpm. What
    voltage and current is to be applied to run the motor at 750 rpm. The armature resistance of the motor
    is 1 ohm and losses are neglected

    Q.9 A 250 V shunt motor has an armature current of 20 A when running at 1000 rpm against full load
    torque. The armature resistance is 0.5 Ω. What resistance must be inserted in series with the armature
    to reduce the speed to 800 rpm at the same torque, and what will be the speed if the load torque is
    halved with this resistance in the circuit. Assume the flux to remain constant throughout and neglect
    brush contact drop
    Q.10 The armature of a four-pole DC shunt generator has 378 wave connected conductors. The
    armature and shunt winding resistance of the generator is 1 ohm and 100 ohm respectively. The flux
    per pole is 0.02 Wb. If a load resistance of 10 ohm is connected across the armature terminals and the
    generator is driven at 1000 rpm, calculate the power absorbed by the load.

    You might also like