Scribd Logo
Upload

Welcome to Scribd!

  • 223 views

    Model 8000 Ping Pong

    Uploaded by

    Exatron Inc.
    The Model 8000-Ping-Pong is an electronics testing handler that features dual operation and a small footprint. It uses one pickup car that alternates between two independent test sites to place and remove devices, doubling throughput over a single handler. Key capabilities include two sets of thermal heads, cameras, and test sites that can be configured separately to run concurrently. This allows processing of different device types at the same time with only a 25% increase in cost over one handler.

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd

    Model 8000 Ping Pong

    Uploaded by

    Exatron Inc.
    223 views2 pages
    The Model 8000-Ping-Pong is an electronics testing handler that features dual operation and a small footprint. It uses one pickup car that alternates between two independent test sites to place and remove devices, doubling throughput over a single handler. Key capabilities include two sets of thermal heads, cameras, and test sites that can be configured separately to run concurrently. This allows processing of different device types at the same time with only a 25% increase in cost over one handler.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Model 8000-Ping-Pong is an electronics testing handler that features dual operation and a small footprint. It uses one pickup car that alternates between two independent test sites to place and remove devices, doubling throughput over a single handler. Key capabilities include two sets of thermal heads, cameras, and test sites that can be configured separately to run concurrently. This allows processing of different device types at the same time with only a 25% increase in cost over one handler.

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd
    Download as pdf
    223 views2 pages

    Model 8000 Ping Pong

    Uploaded by

    Exatron Inc.
    The Model 8000-Ping-Pong is an electronics testing handler that features dual operation and a small footprint. It uses one pickup car that alternates between two independent test sites to place and remove devices, doubling throughput over a single handler. Key capabilities include two sets of thermal heads, cameras, and test sites that can be configured separately to run concurrently. This allows processing of different device types at the same time with only a 25% increase in cost over one handler.

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd
    Download as pdf
    of 2

    Model 8000-Ping-Pong

    excellence in electronics

    Dual Operation Pick-and-Place Handler


    Throughput of two handlers Footprint of one handler Just 25% additional cost Each side can be set up independently for different devices

    System Features
    Two sets of thermal heads (ambient/cold/hot on each) Two cameras; two separate inspections configured differently but running concurrently; for both before & after test Two golden unit trays with pockets for several device sizes Two independent test sites Four trays for separate input & output One pickup car with 4 pickup nozzles ping-pongs between the 2 sides, alternately serving each side GUI Windows-based control software Software for remote service & software updates Lift-off doors with latches Stand-alone welded steel frame; fully enclosed; interlocked EMO switches, Run & Halt buttons front & back Rack-mounted PC with generic replacement components Digital linear and servo motors for precise component handling ESD-safe & CE Mark
    exatron, 2842 Aiello Dr., San Jose, CA 95111-2154 www.exatron.com 1-800-EXA-TRON 408-629-7600 Fax: 408-629-2832 www.pisockets.com

    Features

    Quad pickup heads with infinite rotation

    Handler with upper doors open

    Operation In Brief
    The 1st or leftmost pickup nozzle gets a device from the leftmost tray input and puts it into the test site on the left side of the handler. The 3rd pickup nozzle gets a device from the rightmost tray input and puts it into the test site on the right side of the handler. The 2nd pickup nozzle gets the device from the test site on the left side of the handler and puts it into the output tray (2nd from left). The 4th or rightmost pickup nozzle gets the device from the test site on the right side of the handler and puts it into the output tray (2nd from right).

    Pickup head with device over inspection camera

    Golden unit tray with pockets for various device sizes

    Ambient, cold, & hot thermal test heads

    Cold head with purge cover descending to test site exatron, 2842 Aiello Dr., San Jose, CA 95111-2154 www.exatron.com 1-800-EXA-TRON 408-629-7600 Fax: 408-629-2832 www.pisockets.com

    You might also like