Scribd Logo
Upload

Welcome to Scribd!

  • 82 views

    VFD Trainer With Motor Features:: Siemens

    Uploaded by

    himanshu mohapatra
    The document describes three different variable frequency drive trainers that can be used for experiments. Each trainer includes a variable frequency drive, 0.5HP induction motor, shaft encoder, and mounting structure. The trainers differ in their drive manufacturer (Siemens, Yaskawa, Delta), power specifications, control methods/functions, and number of digital/analog inputs and outputs. The document also lists several suggested experiments that can be performed using the trainers to study variable frequency drive control and operation.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    VFD Trainer With Motor Features:: Siemens

    Uploaded by

    himanshu mohapatra
    82 views6 pages
    The document describes three different variable frequency drive trainers that can be used for experiments. Each trainer includes a variable frequency drive, 0.5HP induction motor, shaft encoder, and mounting structure. The trainers differ in their drive manufacturer (Siemens, Yaskawa, Delta), power specifications, control methods/functions, and number of digital/analog inputs and outputs. The document also lists several suggested experiments that can be performed using the trainers to study variable frequency drive control and operation.

    Original Title

    VFD_Trainer

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes three different variable frequency drive trainers that can be used for experiments. Each trainer includes a variable frequency drive, 0.5HP induction motor, shaft encoder, and mounting structure. The trainers differ in their drive manufacturer (Siemens, Yaskawa, Delta), power specifications, control methods/functions, and number of digital/analog inputs and outputs. The document also lists several suggested experiments that can be performed using the trainers to study variable frequency drive control and operation.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    82 views6 pages

    VFD Trainer With Motor Features:: Siemens

    Uploaded by

    himanshu mohapatra
    The document describes three different variable frequency drive trainers that can be used for experiments. Each trainer includes a variable frequency drive, 0.5HP induction motor, shaft encoder, and mounting structure. The trainers differ in their drive manufacturer (Siemens, Yaskawa, Delta), power specifications, control methods/functions, and number of digital/analog inputs and outputs. The document also lists several suggested experiments that can be performed using the trainers to study variable frequency drive control and operation.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 6

    Siemens

    VFD Trainer with Motor

    Features:
     0.75 KW / 1 HP Variable Frequency Drive with 1Ø, 230V, 50Hz supply.
     Drive & Motor should be from same brand only

    Specifications:
     9 Digital Inputs
     2 Analog Inputs
     3 Digital Outputs
     2 Analog Outputs
     RS485 Communication port

    Open-loop/closed-loop control techniques:


     V/f (linear, square law, free, FFC (flux current control)
     ECO (Encoder less torque control)
     Field-oriented control of speed and torque with encoder

    Software Functions:
     Signal interconnection with BICO technology
     Automatic restart after line supply
     Failure or Operational fault
     Positioning down ramp
     Slip compensation
     Free function blocks (FFB) for logic and arithmetic operations
     Ramp smoothing
     3 selectable drive data sets
     3 selectable command data sets (CDS) (manual/auto)
     Flying restart
     JOG
     Technology controller (PID)
     Thermal motor protection
     Thermal inverter protection
     Set point input
     Motor identification
     Motor holding brake
     Vdcmax controller
     Kinetic buffering
     Braking functions for
     DC braking
     Compound braking
     Dynamic braking
    0.5HP 3Ø Induction Motor
     440V AC
     1440 RPM
     IP55
     0.5HP DC Machine

    Shaft Encoder
     550 PPR / Proximity sensor
     Projected Shaft / Geared Teeth
     A, B, Z
     PNP Type, 24V

    Mechanical Structure
     MS structure
     Aligned installation of AC motor and Shaft encoder
     Electrical terminal strip
     Electrical Panel
     VFD mounting
     Loading Arrangement
     Motor-Generator Set

    Suggested Experiments:
     Study of variable frequency drive and its control and power wiring.
     Study of AC drive parameters
     Interfacing AC drive with digital inputs
     Interfacing AC drive with analog inputs.
     Study of V/F control modes of operation of AC drive with load.
     Study of Encoder interfacing with VFD.
    Yaskawa
    VFD Trainer with Motor

    Features:
     0.75 KW / 1 HP Variable Frequency Drive with 3Ø, 400V, 50Hz supply
     Drive & Motor should be from same brand only

    Specifications:
     8 Digital Inputs
     3 Analog Inputs
     1 Pulse Inputs
     4 Digital Outputs
     2 Analog Outputs
     1 Pulse Outputs
     RS485 Modbus RTU Communication
     Control Methods:
     V/f Control/f Control with PG (encoder), Open Loop Vector Control, Closed Loop
    Vector Control, Open Loop Vector Control for PM, Advanced Open Loop Vector
    Control for PM, Closed Loop Vector Control for PM.
     Main Control Functions:
     Torque Control, Droop Control, Speed/torque Control Switching, Feed Forward
    Control, Zero Servo Function, Momentary Power Loss Ride-Thru, Speed Search,
    Over torque/Under torque Detection, Torque Limit, 17 Step Speed (max),
    Acceleration/deceleration Switch, S-curve Acceleration/deceleration, 3-wire
    Sequence, Auto-tuning (rotational, stationary tuning), Dwell, Cooling Fan on/off
    Switch, Slip Compensation, Torque Compensation, Frequency Jump, Upper/lower
    Limits for Frequency Reference, DC Injection Braking at Start and Stop, Over
    excitation Braking, High Slip Braking, PID Control (with sleep function), Energy
    Saving Control, Modbus Comm. (RS-422/485 max, 115.2 kbps), Fault Restart,
    Application Presets, DriveWorksEZ (customized function), Removable Terminal
    Block with Parameter Backup Function, Online Tuning, KEB, Over Excitation
    Deceleration, Inertia (ASR) Tuning, Overvoltage Suppression, High Frequency
    Injection.

    0.5HP 3Ø Induction Motor


     440V AC
     1440 RPM
     IP55
     0.5HP DC Machine

    Shaft Encoder
     550 PPR / Proximity sensor
     Projected Shaft / Geared Teeth
     A, B, Z
     PNP Type, 24V

    Mechanical Structure
     MS structure
     Aligned installation of AC motor and Shaft encoder
     Electrical terminal strip
     Electrical Panel
     VFD mounting
     Loading Arrangement
     Motor-Generator Set

    Suggested Experiments:
     Study of variable frequency drive and its control and power wiring.
     Study of AC drive parameters
     Interfacing AC drive with digital inputs
     Interfacing AC drive with analog inputs.
     Study of V/F control modes of operation of AC drive with load.
     Study of Encoder interfacing with VFD.
    Delta
    VFD Trainer with Motor

    Features:
     0.75 KW / 1 HP Variable Frequency Drive with 3Ø, 380 to 480 Volts AC, 50Hz
    supply.
     Drive & Motor should be from same brand only

    Specification:
     Analog input terminals (AVI, ACI, AUI, ACM)
     Digital inputs (FWD, REV, MI1~MI6, DCM)
     Digital outputs-photo coupler (MO1, MO2, MCM)
     Digital outputs-relayed (RA,RB,RC,MRA,MRB,MRC)
     Analog output meter (AFM)

    Control Characteristics:
     Control System
     V/f curve
     V/f+ PG (Encoder)
     SVC(Sensor less vector control)
     FOC vector control+PG(Encoder)
     TQR(Torque control)+PG(Encoder)
     V/f Curve Adjustable V/f curve using 4 independent points and square curve
     Frequency Setting Signal±10V, 4~20mA, pulse input
     Braking Type: DC Injection; Dynamic Braking Motor Control-Max Level: Closed
    Loop Vector

    0.5HP 3Ø Induction Motor


     440V AC
     1440 RPM
     IP55
     0.5HP DC Machine

    Shaft Encoder
     550 PPR / Proximity sensor
     Projected Shaft / Geared Teeth
     A, B, Z
     PNP Type, 24

    Mechanical Structure
     MS structure
     Aligned installation of AC motor and Shaft encoder
     Electrical terminal strip
     Electrical Panel
     VFD mounting
     Loading Arrangement
     Motor-Generator Set
    Suggested Experiments:
     Study of variable frequency drive and its control and power wiring.
     Study of AC drive parameters
     Interfacing AC drive with digital inputs
     Interfacing AC drive with analog inputs.
     Study of V/F control modes of operation of AC drive with load.
     Study of Encoder interfacing with VFD.

    You might also like