PERKINS 825-1250 kVA: Technical Specifications
PERKINS 825-1250 kVA: Technical Specifications
PERKINS 825-1250 kVA: Technical Specifications
Technical Specifications
• The alternator windings are protected by insulating varnish against
oil and acid.
EXTRA EQUIPMENTS
• Charge ammeter
• Moulded case circuit braker (in automatic models)
• Hospital/Critical type silencer
• Sound-proof canopy
• Mobile - trailer
• Synchronization control panel for 2-16 gensets
• 3 pole/4 pole automatic transfer panel (A.T.S.)
• Fuel and oil heater
• Alternator heater
• Automatic fuel filling system
• Fuel-water seperator filter
• PMG warning system
CANOPY
• Modular type sound-proof canopy
• Canopy installation executed with screw and nut, without welding
process
• Epoxy and polyester powder painted canopy
ENGINE • Canopy designed for easy maintenance
• PERKINS series heavy duty diesel engine • Lockable doors on both sides of canopy
• 4 cycle, water cooled, turbocharged & air to air charge cooled • Emergency stop button
• Direct injection • Transparent panel inspection window
• Electronic governor system
• 24 volt self-starter and charger alternator
AUTOMATIC CONTROL PANEL
• LCD display screen • Hardware and materials needed
• Changeable air, fuel and oil filter
• Battery charger • USB port & RS-485 output
• Tropical type radiator
• Flexible fuel pipe GEN-SET SAFETY PROTECTION & ALARMS
• Oil discharge valve and extention pipe • High water temperature • Over current load
• Industrial type silencer, exhaust spiral or compensator • Low oil pressure • High & low genset voltage
• Maintenance free battery • High & low engine speed • Start/stop failure
• Engine block water heater (in automatic models) • Low radiator water level
• Diesel gen-set maintenance and operating instructions and Easy maintenance canopy design
electrical circuit diagram
QUALITY STANDARD Refilling from the outside of the canopy
Our generators are manufactured in compliance with VDE 0530,
BSE 4999 BS5000, IEC 34, TS ISO 8528, TS EN ISO 3744, TS EN ISO 3746,
TS EN 60034-1, TS EN 60204-1, TS EN 60335-1, TS EN 61439-1,
Canopy made of galvanized steel
EN 61000, TS EN ISO12100 standards.
We have ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007 and
ISO10002:2006 management system certificates from Kiwa & MEYER,
! Warning system for decreasing fuel with
electronic fuel level sender
an accredited independent quality organization.
Our generators up to 400 kw are manufactured in compliance with
2000/14/EC European noise emission directive and certified from Ente
Certificazione Macchine.
We also have TS ISO 8528-4, TS ISO 8528-5, TS EN 13501-1+A1:2013
flame retardancy and TS EN ISO 9227 certificates against anti-corrosion
together with CE Declaration.
ALTERNATOR
• Brushless, single bearing, flexible disc 4 poles alternator for
harmonic failure
• H type isolation class
• IP 21-23 protection class
• Self exciter
• Electronic automatic voltage regulator
• Stator 2/3 step for harmonic failure
16
PERKINS Series
Diesel Generator Sets
CANOPY DIMENSION (W x L x H) mm 1900 x 5250 x 3330 1900 x 5250 x 3330 2200 x 5550 x 3300 2200 x 5550 x 3300 2200 x 5550 x 3300
OPEN DIMENSION (W x L x H) mm 1900 x 5000 x 2395 1900 x 5000 x 2395 2200 x 5300 x 2640 2200 x 5300 x 2640 2200 x 5300 x 2640
CONTAINER DIMENSION (W x L x H) mm 1900 x 5290 x 3640 1900 x 5290 x 3640 2200 x 5300 x 3390 2200 x 5300 x 3390 2200 x 5300 x 3390
CYCLE 4 4 4 4 4
BORE AND STROKE (mm x mm) 160 x 190 160 x 190 160 x 190 160 x 190 160 x 190
TOTAL LUBRICATION SYSTEM CAPACITY (lt) 113,4 113,4 153 153 153
Emsa reserves the right to make changes in model, technical specifications, color, equipment & accessories without prior notice.
17