AL WAEL

CMA1530C-G-F
Fiber Laser Cutter
About the Product
AL WAEL

CMA1530C - G -F Fiber laser cutting machine is a laser processing

solution that is professionally used in metal processing, aerospace,

electronic appliances, home appliances, elevators, automobiles,

advertising, precision accessories, craft gifts and other manufacturing

industries. The equipment is designed with a gantry double drive

structure, which is dual gear rack and dual servo motor drive system

with high-speed arc cutting function, that can effectively meet the

application requirements of metal materials such as carbon steel,

stainless steel, aluminum plate, galvanized sheet, etc.

Features
High Rigidity Enhanced Aviation Aluminum Gantry, improve the gantry strength and rigidity and much lighter;

Finite element analysis of gantry help to achieve the best critical state of dynamic performance;

Integrated structure design, reasonable overall layout

Rack and pinion structure, servo drive, secondary annealing treatment of high rigid welding frame with high accuracy

and stability

Professional laser cutting software with graphic layout and sharp corner smoothing functions, fast piercing & cutting;

Fiber laser has better Industry-leading wall-plug efficiency (around 30%), less power consumption;

Hand controller is available, easy for operation;

 AL WAEL

Working parameter CMA1530C-G-F

Working area 1500mm x 3000mm

Laser power 1000W

Transmission system Double rack & pinion and servo drive

Maximum speed 60m/min

Positioning accuracy ±0.03mm/1000mm

Repositioning accuracy of clamp ±0.02mm/1000mm

Format LXD、DXF、PLT、AI、NC etc.

Working environment 0-45℃ ，Humidity ≤ 80%, non-condensing

equipment power 8KW(not include laser generator and chiller)

Power supply Three phase 380V/50Hz or 60Hz

Total weight 3000Kg

Overall size 5010mm×2260mm×1900mm

Configuration
No. Item Description Remark
Ⅰ Machine body

1 Square tube welding frame Large gantry finish milling, double annealing Han’s Yueming

2 Linear guide rail Imported precision grade Germany-ROUST WORLD

3 Rack & pinion Imported high speed and high precision Germany-LEITESEN

4 Planetary reducer Imported high precision France brand-MOTOVARIO

5 Gantry Finite element optimization, light weight and high rigidity Han’s Yueming

II Laser source

1 Power 1000W~2000W

2 Brand IPG / Max

III Optical system

2 Auto focus cutting head Auto focus Switzerland brand-Raytools

 AL WAEL

Configuration
No. Item Description Remark
IV Control and drive system

1 Motion Control System Professional laser cutting software, operation is very simple Han’s Yueming
X-axis servo motor：1KW, 2000rpm
2 Motor Y-axis servo motor：1.5KW, 2000rmp France-Schneider
Z-axis servo motor：400W, 3000rpm, with brake
Electrical components are international brands such as
3 Electrical control system France brand
Schneider
4 Industrial computer I5-4200U/8G/120G/WIFI China

V Accessory
Double circulation system, over temperature alarm, flow
1 Cooling system China/S&A
protection, water level protection
2 Exhaust blower 380V/50Hz or 60Hz/3KW/2900rpm Han’s Yueming

3 Pneumatic components Pressure regulating filter, solenoid valve, check valve, etc. Taiwan/Japan
Precision electronically
4 0~1MPa China
controlled proportional valve
5 Optional : Voltage stabilizer 30KVA or 60KVA China

6 Optional : Air compressor 30Kg air compressor & IV degree filter system & dryer China

7 Optional : Dust collector China

Optionals
Optional: Voltage stabilizer

Optional: 30Kg Air compressor & filter & Dryer

 AL WAEL
Core Part -Laser Source
It has a super compact design with the laser housed in a hermetically
sealed cabinet;
Maintenance-free Operation,
A dehumidifier is installed within the cabinet to ensure optimal internal
humidity;
Industry-leading wall-plug efficiency our lasers are known for has
reached over 40% ;
The electrical cost savings add up to many tens of thousands of dollars
over lifetime of a laser;
Wide variety of fiber delivery options (50, 100, 150 or 200
μm) core
diameter;
record reliability and maintenance
-free operation;
Hot redundancy ensures 100% up time with no change in power;
Compact Rugged Design

IPG-YLR Specification YLR-1000/2000

Laser mode CW,QCW

Wavelength 1070-1080nm
Standard output laser power 1000W
Laser beam quality ≤4mm*mrad
Modulation speed 5kHz
Delivery fiber core diameter ≥50μｍ
Output stability ±2%
Power supply 400-460V/3P+PE@50-
60Hz
Core Part-Laser Head AL WAEL

Auto-focus Features：

The focus is controlled by the inner precision servo

motor, no need for manual operation.
Punching time reduced by 80% compared to common
cutting head. Best match for high-speed thick- metal
material cutting and highly reflective material cutting.
Large and complete cutting technique data base.
Operations are done simply through module data
selecting among existing data according to the material
features. Easy and convenient operation.
Supporting remote system monitoring through wireless
handheld box and Ethernet.

Software

Support AI/PLT/Gerber formats, accept Mater Cam, Type3

output international standard G code,

Lead-in/out, cutting compensation, micro-joint, bridging, back

entry, gap cutting etc.,

Multiple piercing methods available, separated laser

power/frequency/ gas type/ gas pressure/ height track can be set

during cutting and piercing,

WIFI remote control panel

 AL WAEL

1000W
Cutting Ability-(for reference only, the real cutting speed depends on the material and gas
Material Thickness(mm) Speed: m/min Gas
SS 1 22 N2
SS 1.5 11 N2
SS 2 6 N2
SS 3 2.5 N2
SS 4 1.2 N2
SS 6 0.6 N2

CS 3 3.5 O2
CS 6 1.6 O2
CS 8 1 O2
CS 10 0.8 O2
CS 12 0.7 O2

Al 1 22 N2
Al 2 5 N2
Al 3 2 N2

Brass 1 10 N2
Brass 2 4 N2
Brass 3 1.3 N2

SGCC 1 20 N2
SGCC 1 22 AIR
SGCC 2 5 N2
SGCC 2 5.5 AIR
SGCC 3 2 N2
SGCC 3 2.2 AIR

Applications & Samples

Applicable Industries: Metal advertising characters, metal cabinets, Stainless steel cutlery, elevator, automobile

parts,
APPLICATIONS
For Channel Sign Letters

AL WAEL

Metal Decors

Metalic Parts