CALZONI / INTERMOT

Interchangeability Sheets

Parker Calzoni Srt

Via Caduti di Sabbiuno 15/17
40011 Anzola dell’Emilia
Bologna Italy
Tel: +39 (051) 6501611
Fax: +39 (051) 736221
e-mail: [email protected]

03/2006
 CALZONI / INTERMOT – Interchangeability sheet

DEGREE OF COMPATIBILITY................................................................................................................................... 4

IMPORTANT NOTE ............................................................................................................................................................ 4

MR 200 D → IAM 200 H2 ............................................................................................................................................... 5

MR 250 D → IAM 250 H2 ............................................................................................................................................... 6

MR 300 D → IAM 300 H2 ............................................................................................................................................... 7

MRE 330 D → IAM 350 H2............................................................................................................................................. 8

MRA 400 D → IAM 400 H2............................................................................................................................................. 9

MR 400 E → IAM 400 H3.............................................................................................................................................. 10

MR 450 E → IAM 450 H3.............................................................................................................................................. 11

MRE 500 E → IAM 500 H3 ........................................................................................................................................... 12

MRA 600 E → IAM 600 H3........................................................................................................................................... 13

MR 700 F → IAM 700 H3.............................................................................................................................................. 14

MR 700 F → IAM 700 H4.............................................................................................................................................. 15

MRE 800 F → IAM 800 H4 ........................................................................................................................................... 16

MR 900 G → IAM 900 H4 ............................................................................................................................................. 17

MR 1000 G → IAM 1000 H4 ......................................................................................................................................... 18

MR 1100 G → IAM 1100 H4 ......................................................................................................................................... 19

MRE 1400 G → IAM 1400 H5....................................................................................................................................... 20

MR 1600 F → IAM 1600 H5.......................................................................................................................................... 21

MR 1800 F → IAM 1800 H5.......................................................................................................................................... 22

MRE 2100 F → IAM 2000 H5 ....................................................................................................................................... 23

MRE 2100 F → IAM 2200 H5 ....................................................................................................................................... 24

MRE 2100 F → IAM 2200 H6 ....................................................................................................................................... 25

MR 2400 I → IAM 2500 H6........................................................................................................................................... 26

MR 2800 I → IAM 2800 H6........................................................................................................................................... 27

MRE 3100 I → IAM 3000 H6 ........................................................................................................................................ 28

MRE 3100 I → IAM 3200 H6 ........................................................................................................................................ 29

MR 4100 L → IAM 3900 H7.......................................................................................................................................... 30

2
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 4500 L → IAM 4300 H7.......................................................................................................................................... 31

MR 4500 L → IAM 4600 H7.......................................................................................................................................... 32

MRE 5400 L → IAM 5400 H7 ....................................................................................................................................... 33

MR 6500 M → IAM 6500 B400 H8 ............................................................................................................................... 34

MR 7000 M → IAM 6800 B400 H8 ............................................................................................................................... 35

MRE 7600 M → IAM 7600 H8...................................................................................................................................... 36

MRE 8200 M → IAM 8000 H8...................................................................................................................................... 37

MRE 8200 M → IAM 8500 H8...................................................................................................................................... 38

CONTACTS ..................................................................................................................................................................... 39

3
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

Degree of compatibility
Calzoni motors’ overall dimensions are generally adapted
to those of other manufacturers by using
interchangeability flanges and couplings. Other
dimensions, such as motor diameter and length, are the
Calzoni standard ones. Moreover Calzoni motors have a
large range of inlet and outlet port configurations.
Please note that couplings are not able to support radial
loads; for special applications the motor can be supplied
by Calzoni with the shaft which allow the motor to be
interchangeable with the other motors without using a
coupling: in this case the motor can carry radial loads like
the standard Calzoni ones.
The cases shown in these pages are only some of all
possible solutions. Pls. do not hesitate to contact Parker
Calzoni Srl in case the motor you want to adapt is not
included in these “Interchangeability Sheets”.

Important note
For a correct application of the Calzoni motors, please refer to the Parker Calzoni technical catalogue.

The specified data are for product description purposes only and must not be interpreted as warranted
characteristic in a legal sense. All rights reserved. Subject to revision.

4
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 200 D → IAM 200 H2

Intermot Calzoni Int. Kit
Motor type IAM 200 H2 MR 200 D
Shaft code A0 F1
cm3/rev 201 199
Displacement KIT: 352918
3
in /rev 12,2 12,1 o FLANGE:
Maximum speed rpm 650 800 352916

Maximum continuous bar 210 250 o COUPLING:

pressure 452915
psi 3046 3626

Maximum continuous kW 40 38
output power Hp 54,6 51

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

5
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 250 D → IAM 250 H2

Intermot Calzoni Int. Kit
Motor type IAM 250 H2 MR 250 D
Shaft code A0 F1
cm3/rev 254 251
Displacement KIT: 352918
3
in /rev 15,5 15,3 o FLANGE:
Maximum speed rpm 510 800 352916

Maximum continuous bar 210 250 o COUPLING:

pressure 452915
psi 3046 3626

Maximum continuous kW 40 48
output power Hp 54,6 64,4

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

6
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 300 D → IAM 300 H2

Intermot Calzoni Int. Kit
Motor type IAM 300 H2 MR 300 D
Shaft code A0 F1
cm3/rev 289 304
Displacement KIT: 352918
3
in /rev 17,6 18,6 o FLANGE:
Maximum speed rpm 500 750 352916

Maximum continuous bar 210 250 o COUPLING:

pressure 452915
psi 3046 3626

Maximum continuous kW 40 53
output power Hp 54,6 71,1

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

7
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 330 D → IAM 350 H2

Intermot Calzoni Int. Kit
Motor type IAM 350 H2 MRE 330 D
Shaft code A0 F1
cm3/rev 361 332
Displacement KIT: 352918
3
in /rev 22 20,3 o FLANGE:
Maximum speed rpm 480 750 352916

Maximum continuous bar 210 210 o COUPLING:

pressure 452915
psi 3046 3046

Maximum continuous kW 40 49
output power Hp 54,6 65,7

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

8
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRA 400 D → IAM 400 H2

Intermot Calzoni Int. Kit
Motor type IAM 400 H2 MRA 400 D
Shaft code A0 F1
cm3/rev 424 391
Displacement KIT: 352918
3
in /rev 25,9 23,9 o FLANGE:
Maximum speed rpm 450 650 352916

Maximum continuous bar 210 210 o COUPLING:

pressure 452915
psi 3046 3046

Maximum continuous kW 61,9 50

output power Hp 83,4 67,1

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

9
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 400 E → IAM 400 H3

Intermot Calzoni Int. Kit
Motor type IAM 400 H3 MR 400 E
Shaft code A0 F1
cm3/rev 397,4 401
Displacement KIT: 352919
3
in /rev 24,2 24,5 o FLANGE:
Maximum speed rpm 500 650 352905

Maximum continuous bar 210 250 o COUPLING:

pressure 452904
psi 3046 3626

Maximum continuous kW 61,9 72

output power Hp 83,4 96,6

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

10
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 450 E → IAM 450 H3

Intermot Calzoni Int. Kit
Motor type IAM 450 H3 MR 450 E
Shaft code A0 F1
cm3/rev 452,2 451,6
Displacement KIT: 352919
3
in /rev 27,6 27,5 o FLANGE:
Maximum speed rpm 440 600 352905

Maximum continuous bar 210 250 o COUPLING:

pressure 452904
psi 3046 3626

Maximum continuous kW 61,9 75

output power Hp 83,4 100,6

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

11
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 500 E → IAM 500 H3

Intermot Calzoni Int. Kit
Motor type IAM 500 H3 MRE 500 E
Shaft code A0 F1
cm3/rev 490,6 497,9
Displacement KIT: 352919
3
in /rev 29,9 30,3 o FLANGE:
Maximum speed rpm 405 600 352905

Maximum continuous bar 210 210 o COUPLING:

pressure 452904
psi 3046 3046

Maximum continuous kW 61,9 70

output power Hp 83,4 93,9

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

12
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRA 600 E → IAM 600 H3

Intermot Calzoni Int. Kit
Motor type IAM 600 H3 MRA 600 E
Shaft code A0 F1
cm3/rev 593,7 616
Displacement KIT: 352919
3
in /rev 36,2 37,6 o FLANGE:
Maximum speed rpm 335 490 352905

Maximum continuous bar 210 190 o COUPLING:

pressure 452904
psi 3046 2756

Maximum continuous kW 61,9 63

output power Hp 83,4 84,5

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

13
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 700 F → IAM 700 H3

Intermot Calzoni Int. Kit
Motor type IAM 700 H3 MR 700 F
Shaft code A0 F1
cm3/rev 706 707
Displacement KIT: 352924
3
in /rev 43,1 43,2 o FLANGE:
Maximum speed rpm 300 500 352902

Maximum continuous bar 190 250 o COUPLING:

pressure 452923
psi 2756 3626

Maximum continuous kW 61,9 97

output power Hp 83,4 130,1

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

14
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 700 F → IAM 700 H4

Intermot Calzoni Int. Kit
Motor type IAM 700 H4 MR 700 F
Shaft code A0 F1
cm3/rev 714 707
Displacement KIT: 352920
3
in /rev 43,6 43,2 o FLANGE:
Maximum speed rpm 280 500 352908

Maximum continuous bar 210 250 o COUPLING:

pressure 452907
psi 3046 3626

Maximum continuous kW 61,9 97

output power Hp 83,4 130,1

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

15
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 800 F → IAM 800 H4

Intermot Calzoni Int. Kit
Motor type IAM 800 H4 MRE 800 F
Shaft code A0 F1
cm3/rev 792,2 804,2
Displacement KIT: 352920
3
in /rev 48,3 49,1 o FLANGE:
Maximum speed rpm 250 450 352908

Maximum continuous bar 210 210 o COUPLING:

pressure 452907
psi 3046 3046

Maximum continuous kW 61,9 93

output power Hp 83,4 124,7

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

16
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 900 G → IAM 900 H4

Intermot Calzoni Int. Kit
Motor type IAM 900 H4 MR 900 G
Shaft code A0 F1
cm3/rev 903 908
Displacement KIT: 352921
3
in /rev 55,1 55,5 o FLANGE:
Maximum speed rpm 220 350 352857

Maximum continuous bar 210 250 o COUPLING:

pressure 452896
psi 3046 3626

Maximum continuous kW 61,9 102

output power Hp 83,4 136,8

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

17
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 1000 G → IAM 1000 H4

Intermot Calzoni Int. Kit
Motor type IAM 1000 H4 MR 1000 G
Shaft code A0 F1
cm3/rev 903 999
Displacement KIT: 352921
3
in /rev 55,1 61 o FLANGE:
Maximum speed rpm 220 340 352857

Maximum continuous bar 210 250 o COUPLING:

pressure 452896
psi 3046 3626

Maximum continuous kW 61,9 109

output power Hp 83,4 146,2

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

18
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 1100 G → IAM 1100 H4

Intermot Calzoni Int. Kit
Motor type IAM 1100 H4 MR 1100 G
Shaft code A0 F1
cm3/rev 1115,4 1125,8
Displacement KIT: 352921
3
in /rev 68,0 68,7 o FLANGE:
Maximum speed rpm 180 330 352857

Maximum continuous bar 210 250 o COUPLING:

pressure 452896
psi 3046 3626

Maximum continuous kW 61,9 119

output power Hp 83,4 159,6

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

19
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 1400 G → IAM 1400 H5

Intermot Calzoni Int. Kit
Motor type IAM 1400 H5 MRE 1400 G

Shaft code A0 F1
cm3/rev 1375 1369,5
Displacement KIT: 352926
3
in /rev 83,9 83,6 o FLANGE:
Maximum speed rpm 300 280 342937

Maximum continuous bar 210 210 o COUPLING:

pressure 452925
psi 3046 3046

Maximum continuous kW 113 102

output power Hp 151 136,8

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

20
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 1600 F → IAM 1600 H5

Intermot Calzoni Int. Kit
Motor type IAM 1600 H5 MR 1600 F
Shaft code A0 F1
cm3/rev 1648 1598,4
Displacement KIT: 352912
3
in /rev 100,6 97,5 o FLANGE:
Maximum speed rpm 250 260 339938

Maximum continuous bar 210 250 o COUPLING:

pressure 452910
psi 3046 3626

Maximum continuous kW 113 144

output power Hp 151 193,1

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

21
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 1800 F → IAM 1800 H5

Intermot Calzoni Int. Kit
Motor type IAM 1800 H5 MR 1800 F
Shaft code A0 F1
cm3/rev 1814 1809,6
Displacement KIT: 352912
3
in /rev 110,7 110,4 o FLANGE:
Maximum speed rpm 230 250 339938

Maximum continuous bar 210 250 o COUPLING:

pressure 452910
psi 3046 3626

Maximum continuous kW 113 153

output power Hp 151 205

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

22
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 2100 F → IAM 2000 H5

Intermot Calzoni Int. Kit
Motor type IAM 2000 H5 MRE 2100 F

Shaft code A0 F1
cm3/rev 2034 2091,2
Displacement KIT: 352912
3
in /rev 124,1 127,6 o FLANGE:
Maximum speed rpm 203 250 339938

Maximum continuous bar 210 210 o COUPLING:

pressure 452910
psi 3046 3046

Maximum continuous kW 113 148

output power Hp 151 198,5

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

23
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 2100 F → IAM 2200 H5

Intermot Calzoni Int. Kit
Motor type IAM 2200 H5 MRE 2100 F

Shaft code A0 F1
cm3/rev 2219 2091,2
Displacement KIT: 352912
3
in /rev 135,4 127,6 o FLANGE:
Maximum speed rpm 180 250 339938

Maximum continuous bar 210 210 o COUPLING:

pressure 452910
psi 3046 3046

Maximum continuous kW 113 148

output power Hp 151 198,5

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

24
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 2100 F → IAM 2200 H6

Intermot Calzoni Int. Kit
Motor type IAM 2200 H6 MRE 2100 F

Shaft code A0 F1
cm3/rev 2200 2091,2
Displacement KIT: 352930
3
in /rev 134,3 127,6 o FLANGE:
Maximum speed rpm 200 250 339813

Maximum continuous bar 210 210 o COUPLING:

pressure 452927
psi 3046 3046

Maximum continuous kW 182,7 148

output power Hp 245 198,5

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

25
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 2400 I → IAM 2500 H6

Intermot Calzoni Int. Kit
Motor type IAM 2500 H6 MR 2400 I
Shaft code A0 F1
cm3/rev 2524 2393
Displacement KIT: 352913
3
in /rev 154 146 o FLANGE:
Maximum speed rpm 210 220 349860

Maximum continuous bar 210 250 o COUPLING:

pressure 452911
psi 3046 3626

Maximum continuous kW 182,7 183

output power Hp 245 245,4

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

26
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 2800 I → IAM 2800 H6

Intermot Calzoni Int. Kit
Motor type IAM 2800 H6 MR 2800 I
Shaft code A0 F1
cm3/rev 2806 2792
Displacement KIT: 352913
3
in /rev 171,2 170,4 o FLANGE:
Maximum speed rpm 190 215 349860

Maximum continuous bar 210 250 o COUPLING:

pressure 452911
psi 3046 3626

Maximum continuous kW 182,7 194

output power Hp 245 260

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

27
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 3100 I → IAM 3000 H6

Intermot Calzoni Int. Kit
Motor type IAM 3000 H6 MRE 3100 I
Shaft code A0 F1
cm3/rev 2983 3103,7
Displacement KIT: 352913
3
in /rev 182 189,3 o FLANGE:
Maximum speed rpm 175 215 349860

Maximum continuous bar 210 210 o COUPLING:

pressure 452911
psi 3046 3046

Maximum continuous kW 182,7 190

output power Hp 245 254,8

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

28
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 3100 I → IAM 3200 H6

Intermot Calzoni Int. Kit
Motor type IAM 3200 H6 MRE 3100 I
Shaft code A0 F1
cm3/rev 3202 3103,7
Displacement KIT: 352913
3
in /rev 195,4 189,3 o FLANGE:
Maximum speed rpm 175 215 349860

Maximum continuous bar 210 210 o COUPLING:

pressure 452911
psi 3046 3046

Maximum continuous kW 182,7 190

output power Hp 245 254,8

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

29
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 4100 L → IAM 3900 H7

Intermot Calzoni Int. Kit
Motor type IAM 3900 H7 MR 4100 L
Shaft code A1 F1
cm3/rev 3906 4104
Displacement KIT: 352914
3
in /rev 238,4 250,5 o FLANGE:
Maximum speed rpm 150 170 350049

Maximum continuous bar 210 210 o COUPLING:

pressure 450054
psi 3046 3046

Maximum continuous kW 182,7 192

output power Hp 245 257,5

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

30
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 4500 L → IAM 4300 H7

Intermot Calzoni Int. Kit
Motor type IAM 4300 H7 MR 4500 L
Shaft code A1 F1
cm3/rev 4343 4502,7
Displacement KIT: 352914
3
in /rev 265 274,7 o FLANGE:
Maximum speed rpm 130 170 350049

Maximum continuous bar 210 250 o COUPLING:

pressure 450054
psi 3046 3626

Maximum continuous kW 182,7 210

output power Hp 245 281,6

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

31
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 4500 L → IAM 4600 H7

Intermot Calzoni Int. Kit
Motor type IAM 4600 H7 MR 4500 L
Shaft code A1 F1
cm3/rev 4615 4502,7
Displacement KIT: 352914
3
in /rev 281,6 274,7 o FLANGE:
Maximum speed rpm 110 170 350049

Maximum continuous bar 210 250 o COUPLING:

pressure 450054
psi 3046 3626

Maximum continuous kW 182,7 210

output power Hp 245 281,6

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

32
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 5400 L → IAM 5400 H7

Intermot Calzoni Int. Kit
Motor type IAM 5400 H7 MRE 5400 L

Shaft code A1 F1
cm3/rev 5383 5401,2
Displacement KIT: 352914
3
in /rev 328,5 329,6 o FLANGE:
Maximum speed rpm 100 160 350049

Maximum continuous bar 210 210 o COUPLING:

pressure 450054
psi 3046 3046

Maximum continuous kW 182,7 210

output power Hp 245 281,6

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

33
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 6500 M → IAM 6500 B400 H8

Intermot Calzoni Int. Kit
Motor type IAM 6500 H8 MR 6500 M
Shaft code A1 F1
cm3/rev 6500 6460,5
Displacement KIT: 352922
3
in /rev 396,7 394,2 o FLANGE:
Maximum speed rpm 110 130 350454

Maximum continuous bar 210 250 o COUPLING:

pressure 452901
psi 3046 3626

Maximum continuous kW 182,7 240

output power Hp 245 321,8

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

34
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MR 7000 M → IAM 6800 B400 H8

Intermot Calzoni Int. Kit
Motor type IAM 6800 H8 MR 7000 M
Shaft code A1 F1
cm3/rev 6958 6967
Displacement KIT: 352922
3
in /rev 424,6 425,1 o FLANGE:
Maximum speed rpm 100 130 350454

Maximum continuous bar 210 250 o COUPLING:

pressure 452901
psi 3046 3626

Maximum continuous kW 182,7 250

output power Hp 245 335,3

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

35
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 7600 M → IAM 7600 H8

Intermot Calzoni Int. Kit
Motor type IAM 7600 H8 MRE 7600 M

Shaft code A1 F1
cm3/rev 7619 7628
Displacement KIT: 352922
3
in /rev 465 465,5 o FLANGE:
Maximum speed rpm 100 130 350454

Maximum continuous bar 210 210 o COUPLING:

pressure 452901
psi 3046 3046

Maximum continuous kW 182,7 250

output power Hp 245 335,3

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

36
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 8200 M → IAM 8000 H8

Intermot Calzoni Int. Kit
Motor type IAM 8000 H8 MRE 8200 M

Shaft code A1 F1
cm3/rev 8066 8226
Displacement KIT: 352922
3
in /rev 492,2 502 o FLANGE:
Maximum speed rpm 100 130 350454

Maximum continuous bar 210 210 o COUPLING:

pressure 452901
psi 3046 3046

Maximum continuous kW 182,7 250

output power Hp 245 335,3

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

37
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

MRE 8200 M → IAM 8500 H8

Intermot Calzoni Int. Kit
Motor type IAM 8500 H8 MRE 8200 M

Shaft code A1 F1
cm3/rev 8511 8226
Displacement KIT: 352922
3
in /rev 519,4 502 o FLANGE:
Maximum speed rpm 100 130 350454

Maximum continuous bar 210 210 o COUPLING:

pressure 452901
psi 3046 3046

Maximum continuous kW 182,7 250

output power Hp 245 335,3

The specified data are for product description purposes only and must not be interpreted as
warranted characteristic in a legal sense. All rights reserved. Subject to revision.
Note: measurements in millimetres

38
RCOe8100/03.06
 CALZONI / INTERMOT – Interchangeability sheet

Contacts

Parker Calzoni S.r.l.

Via caduti di Sabbiuno 15/17
40011 Anzola dell’Emilia
Bologna – Italy
Tel. +39.051.6501611
Fax. +39.051.736221
e-mail: [email protected]

www.parker.com

39
RCOe8100/03.06