Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    Configure Fast Ethernet LAN Interfaces

    Uploaded by

    triple j inc
    The document discusses configuring basic parameters on a Cisco router, including fast Ethernet LAN interfaces, WAN interfaces, and configuring a fast Ethernet WAN interface specifically. It provides steps to configure a fast Ethernet WAN interface by entering interface configuration mode, setting the IP address and subnet mask, enabling the interface, and exiting interface configuration mode. It also briefly mentions configuring LAN interfaces and ATM WAN interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Configure Fast Ethernet LAN Interfaces

    Uploaded by

    triple j inc
    8 views1 page
    The document discusses configuring basic parameters on a Cisco router, including fast Ethernet LAN interfaces, WAN interfaces, and configuring a fast Ethernet WAN interface specifically. It provides steps to configure a fast Ethernet WAN interface by entering interface configuration mode, setting the IP address and subnet mask, enabling the interface, and exiting interface configuration mode. It also briefly mentions configuring LAN interfaces and ATM WAN interfaces.

    Original Title

    routconf-6

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses configuring basic parameters on a Cisco router, including fast Ethernet LAN interfaces, WAN interfaces, and configuring a fast Ethernet WAN interface specifically. It provides steps to configure a fast Ethernet WAN interface by entering interface configuration mode, setting the IP address and subnet mask, enabling the interface, and exiting interface configuration mode. It also briefly mentions configuring LAN interfaces and ATM WAN interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views1 page

    Configure Fast Ethernet LAN Interfaces

    Uploaded by

    triple j inc
    The document discusses configuring basic parameters on a Cisco router, including fast Ethernet LAN interfaces, WAN interfaces, and configuring a fast Ethernet WAN interface specifically. It provides steps to configure a fast Ethernet WAN interface by entering interface configuration mode, setting the IP address and subnet mask, enabling the interface, and exiting interface configuration mode. It also briefly mentions configuring LAN interfaces and ATM WAN interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Chapter 1 Basic Router Configuration

    Configuring Basic Parameters

    Configure Fast Ethernet LAN Interfaces


    The Fast Ethernet LAN interfaces on your router are automatically configured as part of the default
    VLAN and as such, they are not configured with individual addresses. Access is afforded through the
    VLAN. You may assign the interfaces to other VLANs if desired. For more information about creating
    VLANs, see Chapter 5, “Configuring a LAN with DHCP and VLANs.”

    Configure WAN Interfaces


    The Cisco 851 and Cisco 871 routers each have one Fast Ethernet interface for WAN connection. The
    Cisco 857, Cisco 877, and Cisco 878 routers each have one ATM interface for WAN connection.
    Based on the router model you have, configure the WAN interface(s) using one of the following
    procedures:
    • Configure the Fast Ethernet WAN Interface
    • Configure the ATM WAN Interface

    Configure the Fast Ethernet WAN Interface


    This procedure applies only to the Cisco 851 and Cisco 871 router models. Perform these steps to
    configure the Fast Ethernet interface, beginning in global configuration mode:

    Command Purpose
    Step 1 interface type number Enters the configuration mode for a Fast
    Ethernet WAN interface on the router.
    Example:
    Router(config)# interface fastethernet 4
    Router(config-int)#

    Step 2 ip address ip-address mask Sets the IP address and subnet mask for the
    specified Fast Ethernet interface.
    Example:
    Router(config-int)# ip address 192.168.12.2
    255.255.255.0
    Router(config-int)#

    Step 3 no shutdown Enables the Ethernet interface, changing its


    state from administratively down to
    Example: administratively up.
    Router(config-int)# no shutdown
    Router(config-int)#

    Step 4 exit Exits configuration mode for the Fast Ethernet


    interface and returns to global configuration
    Example: mode.
    Router(config-int)# exit
    Router(config)#

    Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide
    1-6 OL-5332-01

    You might also like