OWNER’S MANUAL

LED LCD MONITOR

(LED Monitor*)

* LG LED Monitor applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

32UN650
32BN67U

www.lg.com

Copyright © 2018 LG Electronics Inc. All Rights Reserved.

 TABLE OF CONTENTS LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.

LICENSE....................................................... 2
ENGLISH

ASSEMBLING AND PREPARING................... 3 The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc.
USING THE MONITOR................................... 9

USER SETTINGS......................................... 11
MaxxAudio and additional MAXX trademarks are trademarks and/
TROUBLESHOOTING.................................. 23 or registered trademarks of Waves Audio Ltd.

PRODUCT SPECIFICATION.......................... 25

2
ASSEMBLING AND PREPARING NOTE
•• The components may look different from those illustrated here.
•• Without prior notice, all product information and specifications contained in this manual are subject to change
CAUTION to improve the performance of the product.
•• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer

ENGLISH
•• Always use genuine LG components to ensure safety and product performance.
•• The product warranty will not cover damage or injury caused by the use of unauthorized components. from which you purchased the product.
•• It is recommended that use the supplied components. •• The power cord provided may differ depending upon the region.
•• If you use generic cables not certified by LG, the screen may not display or there may be image noises.
•• Illustrations in this document represent typical procedures, so they may look different from the actual product. Supported Drivers and Software
•• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.) Viimase versiooni saate alla laadida ja installida LGE veebilehelt (www.lg.com).
•• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this Drivers and Software Installation Priority
way will not be covered by the product warranty.
•• Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand Monitor Driver Recommended
and could result in personal injury. OnScreen Control Recommended
•• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen Dual Controller Optional
may cause damage to it.
•• For wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material
in raw material.With no peeled-off appearance, it has good durability. Please use it with confidence because
there is no problem in using the product at all.

3
 Product and Button Description Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•• Place the monitor in the original box or packing material before attempting to move it.
ENGLISH

•• Before moving or lifting the monitor, disconnect the power cord and all other cables.
•• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
•• When holding the monitor, the screen should face away from you to prevent it from being scratched.
•• When transporting the monitor, do not expose the monitor to shock or excessive vibration.
•• When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
Joystick Button
32UN650 32BN67U

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/
down with your finger.

Basic Functions

CAUTION
Press the joystick button once with your finger
Power on •• Avoid touching the monitor screen as much as possible.
to turn on the monitor.
-- This may result in damage to the screen or some of the pixels used to create images.
•• If you use the monitor panel without the stand base, its joystick button may cause the monitor to become
Press and hold the joystick button once more
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick
Power off than 3 seconds with your finger to turn off the
button to malfunction.
monitor.

You can control the volume by moving the

/ Volume control
joystick button left/right.

NOTE
•• The joystick button is located at the bottom of the monitor.

4
Installing on a Table Adjusting the Stand Height
•• Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm (3.94 1 Place the monitor mounted on the stand base in an upright position.
inches) away from the wall to ensure sufficient ventilation.
2 Handle the monitor with both hands for safety.
32UN650 32BN67U

ENGLISH
32UN650
100 mm 100 mm
(3.94 inches) 100 mm (3.94 inches) 100 mm
(3.94 inches) (3.94 inches) Max. 110.0 mm (4.3 inches)
100 mm 100 mm
(3.94 inches) 100 mm (3.94 inches) 100 mm
(3.94 inches) (3.94 inches)

32BN67U

Max. 150.0 mm (5.9 inches)

CAUTION
•• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
•• Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
WARNING
•• If you need another power cord, please contact your local dealer or the nearest retail store.
•• When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.

5
 Adjusting the Angle Using the Kensington Lock
1 Place the monitor mounted on the stand base in an upright position. The connector for the Kensington security system is located at the back of the monitor.
2 Adjust the angle of the screen. For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
ENGLISH

32UN650
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing
experience. 32UN650
32BN67U
The angle of the screen can be adjusted forward or backward from -5° to 35° for a comfortable viewing
experience.

WARNING
•• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
•• Be careful not to touch or press the screen area when adjusting the angle of the monitor.

32UN650
32BN67U

32BN67U

NOTE
•• The Kensington security system is optional. You can obtain optional accessories from most electronics stores.

6
 NOTE Installing on the Wall
•• The left or right side of the monitor head can be slightly rotated up or down (up to 3°). Adjust the horizontal Install the monitor at least 100 mm (3.94 inches) away from the wall and leave about 100 mm (3.94 inches)
level of the monitor head. of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be
obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a
32UN650 32BN67U
Monitor head Monitor head tilting wall mounting bracket.

ENGLISH
100 mm
(3.94 inches)

100 mm
Installing the Wall Mount Plate (3.94 inches) 100 mm
This monitor meets the specifications for the wall mount plate or other compatible devices. 100 mm (3.94 inches)
(3.94 inches)
NOTE
•• The wall mount plate is sold separately. To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
•• For more information on installation, refer to the wall mount plate’s installation guide. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
•• Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen. Wall Mount (mm) 100 x 100
•• Remove the stand before installing the monitor on a wall mount by performing the stand attachment in Standard screw M4 x L10
reverse.
Number of screws 4
Wall Mount Plate (Optional) LSW 149

NOTE
•• A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard screws.
•• The wall mount kit includes the installation guide and all necessary parts.
•• The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.

7
 •• The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product.
•• For more information, please refer to the user manual for the wall mounting bracket.

CAUTION

ENGLISH

•• Unplug the power cord before moving or installing the monitor to avoid electric shock.
•• Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
•• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•• Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty.
•• When measured from the back of the monitor, the length of each installed screw must be 8 mm (0.3 inches)
or less.
Wall Mount Plate

Back of the Monitor

Wall Mount Plate

Back of the Monitor

Standard screw:
M4 x L10

Max. 8 mm (0.3 inches)

8
USING THE MONITOR DisplayPort Connection
Transmits digital video and audio signals from your PC to the monitor.
•• Illustrations in this manual may differ from the actual product. NOTE
Press the joystick button, go to Settings Input, and then select the input option. •• There may be no video or audio output depending on the DP (DisplayPort) version of the PC.

ENGLISH
CAUTION •• If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort)
cable or gender that supports DisplayPort1.2 or 1.4. (Sold separately)
•• Do not press the screen for a prolonged time. This may cause image distortion.
•• Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC
screensaver if possible.
•• When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet.
•• The monitor may flicker when turned on in an area where the temperature is low. This is normal.
•• Sometimes red, green, or blue spots may appear on the screen. This is normal.

Connecting to a PC
•• This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.

HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.

CAUTION
•• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•• Recommended HDMI cable types
-- High-Speed HDMI®/TM cable
-- High-Speed HDMI®/TM cable with Ethernet

9
 Connecting AV Devices Headphones Connection
Connect peripherals to the monitor via the headphones port.
HDMI Connection NOTE
HDMI transmits digital video and audio signals from your AV device to the monitor. •• Peripheral devices are sold separately.
ENGLISH

NOTE •• Depending on the audio settings of the PC and external device, headphones and speaker functions may be
limited.
•• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•• If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not Therefore, it is recommended to use straight earphones.
display or a connection error may occur.
•• Recommended HDMI cable types
-- High-Speed HDMI®/TM cable
-- High-Speed HDMI®/TM cable with Ethernet

Connecting Peripherals Angled Straight

(Recommend)

USB Cable connection (for 32BN67U)

The USB port on the product functions as a USB hub.
To use USB 3.0, connect the A-B type USB 3.0 cable of the product to the PC.
Peripheral devices connected to the USB IN port can be controlled from the PC.
NOTE
•• Make sure to install the most recent Windows OS service pack before using the product.
•• Peripheral devices are sold separately.
•• A keyboard, mouse, or USB device can be connected to the USB port.

CAUTION
Cautions When Using a USB Device
•• A USB device with an automatic recognition program installed, or that uses its own driver, may not be
recognized.
•• Some USB devices may not be supported or may not work properly.
•• It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not
adequate, the USB device may not be recognized properly.)

10
USER SETTINGS
NOTE

ENGLISH
•• Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.

Activating the Main Menu

1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down and left/right to set the options.
3 Press the joystick button once more to exit the main menu.

Joystick Button

Button Menu Status Description

Main menu disabled Enables the main menu.
Exits the main menu.
Main menu enabled
(Holding down the button more than 3 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.)
Main menu disabled Adjusts the monitor volume level.
Main menu enabled Enters the Input features.
Main menu disabled Adjusts the monitor volume level.
Main menu enabled Enters the Settings feature.
Main menu disabled Displays the information on the current input.
Main menu enabled Turns off the monitor.
Main menu disabled Displays the information on the current input.
Main menu enabled Enters the Picture Mode feature.

11
 Main Menu Features

Main Menu Description

Power Off Input Sets input mode.

ENGLISH

Power Off Turns off the monitor.

Settings Configures the screen settings.

Input Exit Settings
Picture Mode Sets the picture mode.

Exit Exits the main menu.

Picture Mode

Menu Settings
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.
2 Move the joystick up/down and left/right to set the options.
3 To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
4 If you want to exit the OSD menu, move the joystick to until you exit.

Quick Settings Input Picture Sound General

12
Quick Settings
Settings > Quick Settings Description
Brightness
Adjusts the contrast and brightness of the screen.

ENGLISH
Contrast
Adjusts the volume.
Volume NOTE
•• You can adjust Mute / Unmute by moving the joystick button to in the Volume menu.

Custom The user can adjust it to red, green, or blue by customization.

Warm Sets the screen color to a reddish tone.

Color Temp Medium Sets the screen color between a red and blue tone.
Cool Sets the screen color to a bluish tone.
Manual The user can fine - tune the color temperature.
On MaxxAudio® by Waves, recipient of a Technical GRAMMY Award® is a suite of studio-quality sound tools for a superior listening experience.
MaxxAudio
Off Disables the MaxxAudio function.

13
 Input
Settings > Input Description
Input List Selects the input mode.
ENGLISH

Adjusts the aspect ratio of the screen.

Full Wide Displays the video in widescreen, regardless of the video signal input.
Original Displays video according to the aspect ratio of the video signal input.
Aspect Ratio Just Scan The aspect ratio is not adjusted from the original.

NOTE
•• The display may look the same for Full Wide , Original, and Just Scan options at the recommended resolution (3840 x 2160).
•• There is no Just Scan menu on FreeSync Mode. ( Go to Picture → Game Adjust → FreeSync, to set from FreeSync Basic or Extended to Off)

14
Picture
NOTE
•• The Picture Mode that can be set depends on the Input signal.

ENGLISH
[Picture Mode on SDR (Non-HDR) signal]

Settings > Picture Description

Custom Allows the user to adjust each element.
Vivid Heightens contrast, brightness and sharpness to display vivid images.
HDR Effect Optimizes the screen for high dynamic range.
Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
Cinema Optimizes the screen for video.
Picture Mode FPS This mode is optimized for FPS games.
RTS This mode is optimized for RTS Game.
Color Weakness This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish
between the two colors.
NOTE
•• If the Picture Mode is changed in the DP (DisplayPort) input, the screen may flicker or the resolution of your PC screen may be affected.

15
 [Picture Mode on HDR signal]

Settings > Picture Description

Custom Allows the user to adjust each element.
ENGLISH

Vivid Optimized the screen for HDR vivid colors.

Cinema Optimized the screen for HDR video.
FPS This mode is optimized for FPS games.It is suitable for very dark FPS games.
Picture Mode RTS This mode is optimized for RTS Game.

NOTE
•• HDR content may not display correctly depending on Window10 OS settings, please check HDR On/Off settings in Windows.
•• When the HDR function is turned on, the characters or picture quality may be poor according to Graphic card performance.
•• While the HDR function is on, screen flickering or cracking may occur when changing the monitor input or power on/off according to Graphic card performance.

16
Settings > Picture Description
Brightness
Adjusts the contrast and brightness of the screen.
Contrast

ENGLISH
Sharpness Adjusts the sharpness of the screen.
High Optimizes the screen for crystal clear images. Best for high-definition video or games.
Optimizes the screen for comfortable viewing, with images at the middle level between the low and high
Middle
modes. Best for UCC or SD videos.
Low Optimizes the screen for smooth and natural images. Best for still images or images with less movement.
SUPER RESOLUTION+
Off Displays in the most common setting. Disables SUPER RESOLUTION+.
Picture Adjust NOTE
•• Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for
normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.
Sets the offset level (for HDMI only).
•• Offset: as a reference for a video signal, this is the darkest color the monitor can display.
Black Level
High Keeps the current contrast ratio of the screen.
Low Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
On Adjusts the brightness automatically according to the screen.
DFC
Off Disables the DFC feature.

17
 Settings > Picture Description
Sets a response time for displayed pictures based on the movement of the picture on the screen.
For a normal environment, it is recommended that you use Fast. When there is a lot of motion, it is recommended that you use
Faster.
ENGLISH

Setting to Faster may cause image sticking.

Response Time
Faster Sets the response time to faster.
Fast Sets the response time to fast.
Normal Sets the response time to normal.
Off Does not use the response time improvement feature.
Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.

CAUTION
Game Adjust •• Supported Interface: DisplayPort, HDMI
•• Supported Graphic Card: A graphic card that supports AMD’s FreeSync is necessary.
FreeSync •• Supported Version: Make sure to update the graphic card to the latest driver.
•• For more information and requirement, refer to AMD website at http://www.amd.com/FreeSync
Extended Enable wider frequency range of FreeSync function than basic mode.
The screen may flicker during the game play.
Basic Enable basic frequency range of FreeSync function.
Off FreeSync function off.
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark
Black Stabilizer
game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.

18
Settings > Picture Description
Mode 1,
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter
Mode 2,
Gamma the image becomes.
Mode 3

ENGLISH
Mode 4 If you do not need to adjust the gamma settings, select Mode 4.
Set your own color temperature.
Custom The user can adjust it to red, green, or blue by customization.
Warm Sets the screen color to a reddish tone.
Color Temp
Medium Sets the screen color to between a red and blue tone.
Color Adjust
Cool Sets the screen color to a bluish tone.
Manual The user can fine - tune the color temperature.

Red/Green/Blue You can customize the picture color using red, green, and blue colors.
Meets the user requirements for colors by adjusting the hue and saturation of the six colors (red, green, blue, cyan, magenta, and
yellow) and then saving the settings.
Six Color Hue Adjusts the tone of the screen colors.
Saturation Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors
become. The higher the value, the more saturated and darker the colors become.
Yes Returns to the default settings.
Picture Reset Do you want to reset your picture settings?
No Cancel the select.

19
 Sound
Settings > Sound Description
Volume To adjust the Volume of headphone or speaker.
ENGLISH

On MaxxAudio® by Waves, recipient of a Technical GRAMMY Award® is a suite of studio-quality sound tools for a superior listening experience.
MaxxAudio
Off Disables the MaxxAudio function.

20
General
Settings > General Description
Language Sets the menu screen to the desired language.

ENGLISH
Conserve energy by using luminance compensation algorithm.
High Saves energy using the high-efficiency SMART ENERGY SAVING feature.
Low Saves energy using the low-efficiency SMART ENERGY SAVING feature.
SMART ENERGY SAVING Off Disables the feature.
NOTE
•• The value of energy saving data may differ depending on panel and panel suppliers.
•• If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become lower or higher depend on source.
Turns the power LED on the bottom of the monitor on or off.
On The power LED turns on automatically.
Off The power LED turns off.

Power LED NOTE

•• When the Power LED function is turned on, it operates as follows:
-- On Mode: White
-- Sleep Mode: White Blinking
-- Off Mode: Off
Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function.
Automatic Standby
(Off, 4 H, 6 H, and 8 H)
Set DisplayPort Version to the same version as the connected external device. (1.4, 1.2, and 1.1)
DisplayPort Version
To use the HDR function, set to 1.4.

21
 Settings > General Description
Provides sharper images when connected to a device supporting ULTRA HD Deep Color.
4K@ 60 Hz Support Format
ENGLISH

Color Depth / Chroma Sampling

Resolution Frame rate(Hz)
8 bit 10 bit
YCbCr 4:2:0
59.94 YCbCr 4:2:2
HDMI ULTRA HD Deep Color 3840 x 2160
60.00 YCbCr 4:4:4 -
RGB 4:4:4 -
NOTE
•• To use HDMI ULTRA HD Deep Color, turn this function "On".
•• If the connected device does not support Deep Color, the screen or sound may not work properly. In this case, set this function to off.
•• The HDMI ULTRA HD Deep Color function can be set individually for each HDMI port.
•• To use the HDR function, set HDMI ULTRA HD Deep Color to “On”.
This feature lets you set the sound generated from Buzzer when your monitor powers on.
Buzzer On Enables your monitor's Buzzer.
Off Disables your monitor's Buzzer.
This feature disables the configuration and adjustment of menus.
On Enables OSD Lock.
OSD Lock Off Disables OSD Lock.
NOTE
•• All features are disabled except Brightness, Contrast, Volume, Input List, Aspect Ratio, OSD Lock and Information.
OSD Size User can select OSD Size to Large or Small.
Information The following display information will be shown; Total Power On Time, Resolution.
Do you want to reset your settings?
Reset to Initial Settings Yes Returns to the default settings.
No Cancel the reset.
22
TROUBLESHOOTING
Nothing is displayed on the screen.

ENGLISH
Is the monitor's power cord plugged in? •• Check if the power cord is correctly plugged into the power outlet.
Is the power LED on? •• Check the power cable connection and press the power button.
Is the power on and the power LED displaying white? •• Check that the connected input is enabled (Settings > Input).

Is the No Signal message being displayed? •• This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.

Is the Out of Range message being displayed? •• This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the Product
Specification section of this manual to set the appropriate frequency.
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution? •• If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended
resolution.
•• Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or
misalignment of the display.
•• The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the
performance of the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.
Does image sticking occur even when the monitor is turned off? •• Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.
•• To extend the lifetime of the monitor, use a screensaver.
Are there spots on the screen? •• When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD screen. It is not an error, nor
is it related to the monitor's performance.
Some features are disabled.
Are some functions not available when you press the Menu button? •• The OSD is locked. Disable OSD Lock in General.

23
 Do you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message?
Have you installed the display driver? •• Be sure to install the display driver from our web site: http://www.lg.com.
•• Make sure to check if the graphics card supports Plug and Play function.
No sound from the headphone port.
ENGLISH

Are images displayed without sound? •• Make sure that the headphone port connections are made properly.
•• Try increasing the volume with the joystick.
•• Set the audio output of the PC to the monitor you are using. (The settings may differ depending on the operating system (OS) you use.)

NOTE
•• LED can be lighted with Set OSD Menu.
Settings – General – Power LED – On

24
PRODUCT SPECIFICATION
32UN650
Color Depth 8-bit / 10-bit color is supported.

ENGLISH
Max Resolution 3840 x 2160 @ 60 Hz
Resolution
Recommended Resolution 3840 x 2160 @ 60 Hz
Power Rating 19 V 3.3 A

Power Sources On mode: 45 W Typ. (Outgoing condition) *

Power Consumption Sleep Mode ≤ 0.5 W **
Off Mode ≤ 0.3 W
DA-65G19, manufactured by Asian Power Devices Inc.,
or LCAP39, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE ,
or ADS-65FAI-19 19065EPG-1, manufactured by SHENZHEN HONOR ELECTRONIC,
AC/DC adaptor
or ADS-65FAI-19 19065EPK-1, manufactured by SHENZHEN HONOR ELECTRONIC,
or ADS-65FAI-19 19065EPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC,
Output: 19 V 3.42 A
Operating Conditions Temperature 0 °C to 40 °C (32 °F to 104 °F)

Humidity Less than 80 %

Environmental Conditions
Storing Conditions Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Humidity Less than 85 %
Monitor Size (Width x Height x Depth)
With Stand 714.3 x 595.9 x 226.7 (mm)
Dimensions 28.1 x 23.4 x 8.9 (inches)
Without Stand 714.3 x 420.1 x 45.7 (mm)
28.1 x 16.5 x 1.7 (inches)
With Stand 8.2 kg (18.0 lbs)
Weight (Without Packaging)
Without Stand 6.5 kg (14.3 lbs)
The specifications are subject to change without notice.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
25
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
 PRODUCT SPECIFICATION
32BN67U
Color Depth 8-bit / 10-bit color is supported.
ENGLISH

Max Resolution 3840 x 2160 @ 60 Hz

Resolution
Recommended Resolution 3840 x 2160 @ 60 Hz
Power Rating 19 V 5.0 A

Power Sources On mode: TBD Typ. (ENERGY STAR® standard) *

Power Consumption Sleep Mode ≤ 0.5 W **
Off Mode ≤ 0.3 W
ADS-110CL-19-3 190110G, manufactured by SHENZHEN HONOR ELECTRONIC,
AC/DC adaptor or ADS-120QL-19A-3 190110E, manufactured by SHENZHEN HONOR ELECTRONIC ,
Output: 19 V 5.79 A
Operating Conditions Temperature 0 °C to 40 °C (32 °F to 104 °F)

Humidity Less than 80 %

Environmental Conditions
Storing Conditions Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Humidity Less than 85 %
Monitor Size (Width x Height x Depth)
With Stand 714.3 x 645.5 x 252.9 (mm)
Dimensions 28.1 x 25.4 x 9.9 (inches)
Without Stand 714.3 x 420.1 x 45.7 (mm)
28.1 x 16.5 x 1.7 (inches)
With Stand 9.9 kg (21.7 lbs)
Weight (Without Packaging)
Without Stand 6.5 kg (14.3 lbs)
The specifications are subject to change without notice.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).

26
Factory Support Mode (Preset Mode, PC)
DisplayPort

ENGLISH
Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks

640 x 480 31.469 59.94 -/-

800 x 600 37.879 60.317 +/+
1024 x 768 48.363 60 -/-
1920 x 1080 67.5 60 +/-
2560 x 1440 88.79 59.95 +/-
3840 x 2160 66.66 30 +/-
3840 x 2160 133.32 60 +/- DP Preferred timing

27
 HDMI

Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks
ENGLISH

640 x 480 31.469 59.94 -/-

800 x 600 37.879 60.317 +/+
1024 x 768 48.363 60 -/-
1920 x 1080 67.5 60 +/-
2560 x 1440 88.79 59.95 +/-
3840 x 2160 66.66 30 +/- HDMI Preferred timing, HDMI ULTRA HD Deep Color : Off
3840 x 2160 135 60 +/- HDMI Preferred timing, HDMI ULTRA HD Deep Color : On

28
HDMI Timing (Video)
Factory support mode Horizontal
Vertical Frequency(Hz) Remarks
(Preset Mode) Frequency(kHz)

ENGLISH
480p 31.5 60
720p 45.0 60
1080p 67.5 60
2160p 135 60 When HDMI ULTRA HD Deep Color is set to ON

29
 Supplier’s Declaration of Conformity
Trade Name
LG
Responsible Party
LG Electronics USA, Inc.
Address 111 Sylvan Avenue, North Building
Englewood Cliffa, NJ 07632 (for 32BN67U)
Telephone (201)266-2215

The model and serial number of the product are located on the back and on one side of the product. Record them
below in case you ever need service. This Product qualifies for ENERGY STAR®
Changing the factory default configuration and settings or enabling certain optional features and functionalities may
Model increase energy consumption beyond the limits required for ENERGY STAR® certification.
Serial No. Refer to ENERGYSTAR.gov for more information on the ENERGY STAR® program.