Scribd Logo
Upload

Welcome to Scribd!

  • 4K views

    10.4.3-Packet-Tracer - Basic-Device-Configuration

    Uploaded by

    Gaille Anne
    1. The document describes a network topology with a router connecting two LANs, along with IP addressing and configuration objectives for the router, switch, and host devices to establish connectivity. 2. The objectives are to complete the network documentation, perform basic configurations on the router and switch, and verify connectivity between all devices using IPv4 and IPv6 addressing. 3. The tasks include configuring IP addresses, descriptions, passwords, a banner, and saving the configurations on the router and switch to enable ping connectivity between all devices.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    10.4.3-Packet-Tracer - Basic-Device-Configuration

    Uploaded by

    Gaille Anne
    4K views2 pages
    1. The document describes a network topology with a router connecting two LANs, along with IP addressing and configuration objectives for the router, switch, and host devices to establish connectivity. 2. The objectives are to complete the network documentation, perform basic configurations on the router and switch, and verify connectivity between all devices using IPv4 and IPv6 addressing. 3. The tasks include configuring IP addresses, descriptions, passwords, a banner, and saving the configurations on the router and switch to enable ping connectivity between all devices.

    Original Title

    10.4.3-packet-tracer - -basic-device-configuration.docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document describes a network topology with a router connecting two LANs, along with IP addressing and configuration objectives for the router, switch, and host devices to establish connectivity. 2. The objectives are to complete the network documentation, perform basic configurations on the router and switch, and verify connectivity between all devices using IPv4 and IPv6 addressing. 3. The tasks include configuring IP addresses, descriptions, passwords, a banner, and saving the configurations on the router and switch to enable ping connectivity between all devices.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    4K views2 pages

    10.4.3-Packet-Tracer - Basic-Device-Configuration

    Uploaded by

    Gaille Anne
    1. The document describes a network topology with a router connecting two LANs, along with IP addressing and configuration objectives for the router, switch, and host devices to establish connectivity. 2. The objectives are to complete the network documentation, perform basic configurations on the router and switch, and verify connectivity between all devices using IPv4 and IPv6 addressing. 3. The tasks include configuring IP addresses, descriptions, passwords, a banner, and saving the configurations on the router and switch to enable ping connectivity between all devices.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Packet Tracer - Basic Device Configuration

    Topology
    You will receive one of three possible topologies.

    Addressing Table

    Device Interface IP Address Default Gateway

    College G0/0 128.107.20.1/24 N/A


    2001:DB8:A::1/64
    FE80::1
    G0/1 128.107.30.1/24 N/A
    2001:DB8:B::1/64
    FE80::1
    Class-A VLAN 1 128.107.20.2/24 128.107.20.1
    Class-B VLAN 1 128.107.30.15/24 128.107.30.1
    Student-1 NIC 128.107.20.25/24 128.107.20.1
    2001:DB8:A::2/64 FE80::1
    Student-2 NIC 128.107.20.30/24 128.107.20.1
    2001:DB8:A::3/64 FE80::1
    Student-3 NIC 128.107.30.25/24 128.107.30.1
    2001:DB8:B::2/64 FE80::1
    Student-4 NIC 128.107.30.30/24 128.107.30.1
    2001:DB8:B::3/64 FE80::1

    Objectives
     Complete the network documentation.
     Perform basic device configurations on a router and a switch.
     Verify connectivity and troubleshoot any issues.

    Scenario
    Your network manager is impressed with your performance in your job as a LAN technician. She would like
    you to demonstrate your ability to configure a router that connects two LANs. Your tasks include configuring
    basic settings on a router and a switch using the Cisco IOS. You will also configure IPv6 addresses on
    network devices and hosts. You will then verify the configurations by testing end-to-end connectivity. You goal
    is to establish connectivity between all devices.

    2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 2 www.netacad.com
    Packet Tracer - Basic Device Configuration

    Note: The VLAN1 interface on will not be reachable over IPv6.


    In this activity you will configure the router, switch, and the PC hosts.
    Note: Packet Tracer will not score some configured values, however these values are required to accomplish
    full connectivity in the network.

    Requirements
     Provide the missing information in the Addressing Table.
     Name the router and the second switch . You will not be able to access
    the switch.
     Use cisco as the user EXEC password for all lines.
     Use class as the encrypted privileged EXEC password.
     Encrypt all plaintext passwords.
     Configure an appropriate banner.
     Configure IPv4 and IPv6 addressing for the switch according to the Addressing Table.
     Configure IPv4 and IPv6 addressing for the switch according to the Addressing Table.
     The hosts are partially configured. Complete the IPv4 addressing, and fully configure the IPv6 addresses
    according to the Addressing Table.
     Document interfaces with descriptions, including the VLAN 1 interface.
     Save your configurations.
     Verify connectivity between all devices. All devices should be able to ping all other device s with IPv4 and
    IPv6.
     Troubleshoot and document any issues.
     Implement the solutions necessary to enable and verify full end-to-end connectivity.
    Note: Click Check Results button to see your progress. Click the Reset Activity button to generate a new
    set of requirements.

    You might also like