Brought to you by Pro Gear & Transmission courtesy of Parker Hannifin Chelsea PTO

For parts or service call us Pro Gear & Transmission, Inc.

(877) 776-4600 or (407) 872-1901 [email protected]
®
CHELSEA Bulletin HY25-2912-M 1/US

Replacement Parts List

912 Series Manual Effective:
Supersedes:
December 15, 2001
P410-912 Dated March 2000

Parker
 For parts or service call us
Pro Gear & Transmission, Inc.

1 (877) 776-4600
(407) 872-1901
[email protected]
906 W. Gore St.
Orlando, FL 32805
Bulletin HY25-2912-M1/US Power Take-Off
912 Series

WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation
by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for
making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation
and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are
governed by the provisions stated in the "Offer of Sale".

© Copyright 2001, Parker Hannifin Corporation, All Rights Reserved

II Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Bulletin HY25-2912-M1/US Power Take-Off
Contents 912 Series

Full View ................................................................................................................................. 1

Side View................................................................................................................................ 1

Bill of Materials .................................................................................................................... 2-3

Mounting Detail ...................................................................................................................... 4

Model Number Designation .................................................................................................... 5

Offer of Sale ........................................................................................................................... 8

III Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Bulletin HY25-2912-M1/US Power Take-Off
Full and Side Views 912 Series

A
SPL-170 ........ 3.088 [78.44]
1710 .............. 2.988 [75.89]
SPL-250 ........ 3.538 [89.86]
1810 .............. 3.300 [83.82]
1610 Flange .. 1.253 [31.83]

1 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Bulletin HY25-2912-M1/US Power Take-Off
Bill of Materials 912 Series

Item Part Number Description Quantity

1 1-P-484 Housing (912 Series) ................................................................................................ 1
2 2-P-710 P.T.O. Drive Gear ...................................................................................................... 1
3 3-P-848 Drive Shaft, Input ...................................................................................................... 1
4 4-P-87 Spacer, Bearing ........................................................................................................ 1
5 21-P-513 Bearing Retainer, Input ............................................................................................. 1
6 22-P-45 Gasket ...................................................................................................................... 2
7 28-P-237 Oil Seal ..................................................................................................................... 1

9 34-P-53 Cover Plate ............................................................................................................... 2

10 35-P-15-2 Gasket, Cover (.020" Thick) ...................................................................................... 2
11 35-P-32 Gasket, Cover Plate (.094" Thick) ............................................................................ 1
12 57-P-11 Sliding Clutch ............................................................................................................ 1
13 68-P-2 Name Plate ............................................................................................................... 1

329063X AIR SHIFT COVER ASSEMBLY, 912 Series ........................................................... 1

16 28-P-114 O-Ring .................................................................................................................. 1
17 28-P-115 O-Ring .................................................................................................................. 1
18 32-P-164 Shifter Fork ........................................................................................................... 1
19 34-P-109 Shifter Cover ........................................................................................................ 1
20 35-P-30 Gasket .................................................................................................................. 2
21 65-P-13 Cyl. Air Shift .......................................................................................................... 1
329064X Shifter Shaft Sub Assembly ................................................................................. 1
23 11-P-148 Shifter Shaft ......................................................................................................... 1
24 66-P-8 Piston ................................................................................................................... 1
25 378431-26 Cap Screw, Hex Head .......................................................................................... 2
26 378473 Plug, Housing ....................................................................................................... 1
27 378513 Breather ............................................................................................................... 1
28 378838 Cylinder Cap ........................................................................................................ 1
29 379652 Indicator Switch .................................................................................................... 1
30 379374 Capscrew, Socket Head ....................................................................................... 2
31 500897-3 Shipping Plug ....................................................................................................... 2
32 378432-11 Cap Screw, Hex Head (.438"-14 x 1.125") w/Patch ................................................. 6
33 378432-26 Cap Screw, Hex Head (.438"-14 x 3.00") w/Patch ................................................... 2
329065X Tail Shaft Sub ASSEMBLY (Items 35-55) (Ref. 3.750" Dia. Hub) ............................. 1
329098X Tail Shaft Sub ASSEMBLY, No Speedo (Items 35-55, Less Items 44 & 45) ............ 1
35 3-P-821 Output Shaft ......................................................................................................... 1
36 4-P-145 Spacer, Output Shaft ............................................................................................ 1
37 21-P-512 Bearing Cap Output ............................................................................................. 1
N.S. 378513 Breather ............................................................................................................... 1
39 22-P-85 Gasket, Output Cap ............................................................................................. 1
40 28-P-237 Oil Seal ................................................................................................................. 1
41 45-P-7 Bushing ................................................................................................................ 1
42 54-P-20 Bearing Retainer .................................................................................................. 1
328984X Bushing Assembly, Speedo ................................................................................. 1
44 28-P-181 Seal ...................................................................................................................... 1
45 379337 Bushing ................................................................................................................ 1
46 378309 Gasket Dust Cap .................................................................................................. 1
47 378357 Lockring ................................................................................................................ 1
48 378359 Lockring ................................................................................................................ 1
49 378433-12 Capscrew, Hex Head ........................................................................................... 4
50 378512 Dust Cap .............................................................................................................. 1
51 379322 Gear, Speedo-Drive ............................................................................................. 1
52 379333 Gear, Speedo-Driven ........................................................................................... 1
53 379479 Gasket, Shaft ....................................................................................................... 1
54 550574 Ball Bearing .......................................................................................................... 1
55 550811 Roller Bearing ...................................................................................................... 1

57 378116 Drain Plug ................................................................................................................. 1

58 378117 Gasket, Copper ........................................................................................................ 1
59 379479 Gasket, Shaft ............................................................................................................ 1

N.S. — Not Shown A.R. — As Required

2 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Bulletin HY25-2912-M1/US Power Take-Off
Bill of Materials 912 Series

Item Part Number Description Quantity

60 378357 Retaining Ring .......................................................................................................... 1
61 378422 Drive Screw .............................................................................................................. 2
62 378432-9 Capscrew, Hex Head (.438"-14 X .875") w/Patch .................................................... 10
64 378433-12 Capscrew, Hex Head (.500"-13 X 1.25") w/Patch .................................................... 8
65 379334 Oil Level Caution Tag w/Wire Tie .............................................................................. 1
67 500114-3 Pipe Plug (.500"-14 N.P.T.F). .................................................................................... 1
68 550443 Roller Bearing ........................................................................................................... 1
69 550574 Ball Bearing .............................................................................................................. 1

END YOKE OPTIONS

6-4-6931-1X End Yoke & Slinger Ass’y, 1710 Series (1/2 Round) .................................................. 2 or
71 6-4-6821-1 Yoke, 1710 Series .................................................................................................. 1
72 231616 Slinger (Ref. Spicer No.) ........................................................................................ 1
6.5-4-3561-1X End Yoke & Slinger Ass’y, 1810 Series (1/2 Round) .................................................. 2 or
74 6.5-4-3491-1 Yoke, 1810 Series .................................................................................................. 1
75 231616 Slinger (Ref. Spicer No.) ........................................................................................ 1
170-4-521-1X End Yoke & Slinger Ass’y, SPL170 Series (1/2 Round) ............................................. 2 or
77 170-4-511-1 Yoke, SPL170 Series ............................................................................................. 1
78 231616 Slinger (Ref. Spicer No.) ........................................................................................ 1
250-4-241-1X End Yoke & Slinger Ass’y, SPL250 Series (1/2 Round) ............................................. 2 or
79 250-4-231-1 Yoke, SPL250 Series ............................................................................................. 1
80 231616 Slinger (Ref. Spicer No.) ........................................................................................ 1
5-1-6611X Companion Flange Ass’y ......................................................................................... 2
N.S. 2-5-6601 1610 Companion Flange ....................................................................................... 1
N.S. 231616 Slinger (Ref. Spicer No.) ........................................................................................ 1

81 328799-3X Trunnion Block .......................................................................................................... 1

82 379375 Capscrew, Hex Head (.500"-20 X 1.250") w/Drylock 200 ........................................ 4
83 379350 Washer Lock Plate .................................................................................................... 2
84 379372 Protective Shipping Net (Red) (“J” Assembly Only) ................................................. 2
85 378280 Shipping Cover ......................................................................................................... 1

LOOSE PARTS
328388-39X Installation Kit, Air Shift ............................................................................................ 1

SERVICE PARTS
328948-10X Gasket & Installation Instructions ............................................................................. 1
328356-62X Seal Kit, Air shift
328356-63X Seal Kit, w/Speedometer
328356-64X Seal Kit, w/o Speedometer
328356-65X Seal Kit, Lever Shift

N.S. — Not Shown A.R. — As Required

3 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Bulletin HY25-2912-M1/US Power Take-Off
Mounting Detail 912 Series

4 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Bulletin HY25-2912-M1/US Power Take-Off
Model Number Designation 912 Series

912 AH A T - A XX G A

Basic Model Output Brake

912 A = No Brake w/Speedo
Gear Pitch C = No Brake /No Speedo
AH Input-Output Shaft
Shifter Type G = 2.750" Shaft w/1710 Half Rd. Yoke
A = Air Shift H = 2.750" Shaft w/1810 Half Rd. Yoke
Y = Lever Shift J = w/o Flanges
M = 2.750" Shaft w/1610 Companion Flange
Shifter Arrangement P = SPL-170 Yoke
A = Lever Shift Only S = SPL-250 Yoke
D = Shifter at 4:00
E = Shifter at 8:00 P.T.O. Output Shaft
T = Shifter at 12:00 XX = P.T.O.
Assembly Arrangement
NOTE: Unit Weight = Dry w/Yokes = 200 Lbs. A
Oil Capacity = 2.5 Qts. (Less P.T.O.)
Type of Lube = S.A.E. 30 or S.A.E. 50 Wt.

5 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Notes

6 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Notes

7 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Offer of Sale
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized
distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This
offer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items,
when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute
acceptance of this offer.
1. Terms and Conditions of Sale: All descriptions, quotations, propos- have the right to alter, discard or otherwise dispose of any special tooling
als, offers, acknowledgments, acceptances and sales of Seller’s prod- or other property in its sole discretion at any time.
ucts are subject to and shall be governed exclusively by the terms and 8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,
conditions stated herein. Buyer’s acceptance of any offer to sell is limited confidential information or equipment furnished by Buyer or any other
to these terms and conditions. Any terms or conditions in addition to, or items which become Buyer’s property, may be considered obsolete and
inconsistent with those stated herein, proposed by Buyer in any accep- may be destroyed by Seller after two (2) consecutive years have elapsed
tance of an offer by Seller, are hereby objected to. No such additional, without Buyer placing an order for the items which are manufactured
different or inconsistent terms and conditions shall become part of the using such property, Seller shall not be responsible for any loss or
contract between Buyer and Seller unless expressly accepted in writing damage to such property while it is in Seller’s possession or control.
by Seller. Seller’s acceptance of any offer to purchase by Buyer is 9. Taxes: Unless otherwise indicated on the face hereof, all prices and
expressly conditional upon Buyer’s assent to all the terms and conditions charges are exclusive of excise, sales, use, property, occupational or like
stated herein, including any terms in addition to, or inconsistent with taxes which may be imposed by any taxing authority upon the manufac-
those contained in Buyer’s offer, Acceptance of Seller’s products shall in ture, sale or delivery of the items sold hereunder. If any such taxes must
all events constitute such assent. be paid by Seller or if Seller is liable for the collection of such tax, the
2. Payment: Payment shall be made by Buyer net 30 days from the date of amount thereof shall be in addition to the amounts for the items sold. Buyer
delivery of the items purchased hereunder. Amounts not timely paid shall agrees to pay all such taxes or to reimburse Seller therefore upon receipt
bear interest at the maximum rate permitted by law for each month or portion of its invoice. If Buyer claims exemption from any sales, use or other tax
thereof that the Buyer is late in making payment. Any claims by Buyer for imposed by any taxing authority, Buyer shall save Seller harmless from
omissions or shortages in a shipment shall be waived unless Seller receives and against any such tax, together with any interest or penalties thereon
notice thereof within 30 days after Buyer’s receipt of the shipment. which may be assessed if the items are held to be taxable.
3. Delivery: Unless otherwise provided on the face hereof, delivery shall 10. Indemnity For Infringement of Intellectual Property Rights:
be made F.O.B. Seller’s plant. Regardless of the method of delivery, Seller shall have no liability for infringement of any patents, trademarks,
however, risk of loss shall pass to Buyer upon Seller’s delivery to a copyrights, trade dress, trade secrets or similar rights except as provided
carrier. Any delivery dates shown are approximate only and Seller shall in this Part 10. Seller will defend and indemnify Buyer against allegations
have no liability for any delays in delivery. of infringement of U.S. Patents, U.S. Trademarks, copyrights, trade
4. Warranty: Seller warrants that the items sold hereunder shall be free dress and trade secrets (hereinafter ‘Intellectual Property Rights’). Seller
from defects in material or workmanship for a period of: will defend at its expense and will pay the cost of any settlement or
(A) All Power Take-Off units one (1) year from date of installation. damages awarded in an action brought against Buyer based on an
(B) Except 267, 277, 278, 242, 244, 245, 250, 251 and 859 series two allegation that an item sold pursuant to this contract infringes the
(2) years from date of installation. THIS WARRANTY COMPRISES THE Intellectual Property Rights of a third party. Seller’s obligation to defend
SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED and indemnify Buyer is contingent on Buyer notifying Seller within ten
HEREUNDER. SELLER MAKES NO OTHER WARRANTY, GUARAN- (10) days after Buyer becomes aware of such allegations of infringe-
TEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL ment, and Seller having sole control over the defense of any allegations
OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER- or actions including all negotiations for settlement or compromise. If an
CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, item sold hereunder is subject to a claim that it infringes the Intellectual
IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR Property Rights of a third party, Seller may, at its sole expense and
COURSE OF DEALING ARE HEREBY DISCLAIMED. NOTWITH- option, procure for Buyer the right to continue using said item, replace or
STANDING THE FOREGOING, THERE ARE NO WARRANTIES WHAT- modify said item so as to make it noninfringing, or offer to accept return
SOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PAR- of said item and return the purchase price less a reasonable allowance
TIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS. for depreciation. Notwithstanding the foregoing, Seller shall have no
5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR liability for claims of infringement based on information provided by
IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CON- Buyer, or directed to items delivered hereunder for which the designs are
TRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR RE- specified in whole or part by Buyer, or infringements resulting from the
PLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PUR- modification, combination or use in a system of any item sold hereunder.
CHASE PRICE PAID BY BUYER, AT SELLER’S SOLE OPTION. IN NO The foregoing provisions of this Part 10 shall constitute Seller’s sole and
EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CON- exclusive liability and Buyer’s sole and exclusive remedy for infringe-
SEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE ment of Intellectual Property Rights.
WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS If a claim is based on information provided by Buyer or if the design for
ARISING FROM OR IN ANY WAY CONNECTED WITH THIS AGREE- an item delivered hereunder is specified in whole or in part by Buyer,
MENT OR ITEMS SOLD HEREUNDER, WHETHER ALLEGED TO Buyer shall defend and indemnify Seller for all costs, expenses or
ARISE FROM BREACH OF CONTRACT, EXPRESS OR IMPLIED judgments resulting from any claim that such item infringes any patent,
WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, trademark, copyright, trade dress, trade secret or any similar right.
NEGLIGENCE, FAILURE TO WARN OR STRICT LIABILITY. 11. Force Majeure: Seller does not assume the risk of and shall not be
6. Changes, Reschedules and Cancellations: Buyer may request to liable for delay or failure to perform any of Seller’s obligations by reason
modify the designs or specifications for the items sold hereunder as well of circumstances beyond the reasonable control of Seller (hereinafter
as the quantities and delivery dates thereof, or may request to cancel all ‘Events of Force Majeure’). Events of Force Majeure shall include
or part of this order, however, no such requested modification or without limitation, accidents, acts of God, strikes or labor disputes, acts,
cancellation shall become part of the contract between Buyer and Seller laws, rules or regulations of any government or government agency,
unless accepted by Seller in a written amendment to this Agreement. fires, floods, delays or failures in delivery of carriers or suppliers,
Acceptance of any such requested modification or cancellation shall be shortages of materials and any other cause beyond Seller’s control.
at Seller’s discretion, and shall be upon such terms and conditions as 12. Entire Agreement/Governing Law: The terms and conditions set
Seller may require. forth herein, together with any amendments, modifications and any
7. Special Tooling: A tooling charge may be imposed for any special different terms or conditions expressly accepted by Seller in writing, shall
tooling, including without limitation, dies, fixtures, molds and patterns, constitute the entire Agreement concerning the items sold, and there are
acquired to manufacture items sold pursuant to this contract. Such no oral or other representations or agreements which pertain there/to.
special tooling shall be and remain Seller’s property notwithstanding This Agreement shall be governed in all respects by the law of the State
payment of any charges by Buyer. In no event will Buyer acquire any of Ohio. No actions arising out of the sale of the items sold hereunder or
interest in apparatus belonging to Seller which is utilized in the manufac- this Agreement may be brought by either party more than two (2) years
ture of the items sold hereunder, even if such apparatus has been after the cause of action accrues.
specially converted or adapted for such manufacture and notwithstand-
ing any charges paid by Buyer. Unless otherwise agreed, Seller shall 9/01-P

8 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
 For parts or service call us
Pro Gear & Transmission, Inc.

1 (877) 776-4600
(407) 872-1901
[email protected]
906 W. Gore St.
Orlando, FL 32805