Pneumatic Cylinders: Series P1D-B Basic Line - Ø32 To Ø125 MM According To ISO 15552

aerospace
climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding
Pneumatic Cylinders
Series P1D-B Basic Line - Ø32 to Ø125 mm
According to ISO 15552
PDE2659TCUK
PDE2659TCUK
P1D-B Pneumatic ISO Cylinders
Contents page
P1D-B – ISO 15552 Cylinders Range .............................................................. 3
Cylinder forces, double acting variants ............................................................ 4
Main data ....................................................................................................... 4
Total mass including moving parts .................................................................. 4
General technical data .................................................................................... 5
Operating and environmental data .................................................................. 5
Material specification ...................................................................................... 5
Cushioning characteristics .............................................................................. 6
Guide for selecting suitable tubing .................................................................. 7-8
Order code ..................................................................................................... 9
Standard strokes ............................................................................................ 10
Dimensions .................................................................................................... 11
Mountings overview......................................................................................... 12
Cylinder mountings ......................................................................................... 13-17
Piston rod mountings ...................................................................................... 18-19
Sensors .......................................................................................................... 20-22
Seal kits .......................................................................................................... 23
Grease …………….......................................................................................... 23
Spare parts .................................................................................................... 24
Air quality ....................................................................................................... 25
Important Note
Before attempting any external or internal work on All technical data in this catalogue are typical data
the cylinder or any connected components, make only.
sure the cylinder is vented and disconnect the air Air quality is essential for maximum cylinder service
supply in order to ensure isolation of the air supply. life (see ISO 8573).
WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND
PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise.
It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications
for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning
requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin
Corporation and its subsidiaries at any time without notice.
SALE CONDITIONS
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered into by Parker will be governed by the provisions
stated in Parker’s standard terms and conditions of sale (copy available upon request).
Parker Hannifin Corporation

Pneumatic Division - Europe
2
PDE2659TCUK
Anodised body Polyurethane seals Magnetic pistons

extrusion. as standard.
Surface treated steel

end cover nuts.
Adjustable cushioning.
All P1D-B cylinders for

normal temperature
have initial greasing of a
transparent, non-toxic
One piston rod Stainless steel piston rod Metal piston rod bearing Body extrusion grease, approved by the
nut according as standard. Hard chromed with grooves for food industry, which is
to ISO 8675 steel available as an option. ”drop-in” sensors. entirely free from PTFE
is included as and silicone.
standard.
Standard cylinders P1D-B, ISO 15552

Global product range Features
The P1D-B Series meets the specifications in the ISO 15552 • ISO 15552 conformity.
standard. This means full interchangeability to any ISO 15552 • Bore sizes 32-125 mm.
cylinder anywhere around the globe. P1D-B will be available
throughout the extensive worldwide Parker Hannifin organization • Corrosion resistant design with barrel in anodized aluminium
– for the benefit to you and your customers. and stainless steel piston rod.
• Polyurethane seal technology.
• Adjustable air cushioning.
• Range of mountings available.
• Drop in global P8S-G sensors.
• Metal piston rod bearing.

3
PDE2659TCUK
Cylinder forces, double acting variants

Cyl. bore/ Stroke Piston Max theoretical force in N (bar)
pist. rod mm cm 2 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0
32/12 + 8,0 80 161 241 322 402 483 563 643 724 804
- 6,9 69 138 207 276 346 415 484 553 622 691
40/16 + 12,6 126 251 377 503 628 754 880 1005 1131 1257
- 10,6 106 212 318 424 530 636 742 848 954 1060
50/20 + 19,6 196 393 589 785 982 1178 1374 1571 1767 1963
- 16,5 165 330 495 660 825 990 1155 1319 1484 1649
63/20 + 31,2 312 623 935 1247 1559 1870 2182 2494 2806 3117
- 28,0 280 561 841 1121 1402 1682 1962 2242 2523 2803
80/25 + 50,3 503 1005 1508 2011 2513 3016 3519 4021 4524 5027
- 45,4 454 907 1361 1814 2268 2721 3175 3629 4082 4536
100/25 + 78,5 785 1571 2356 3142 3927 4712 5498 6283 7069 7854
- 73,6 736 1473 2209 2945 3682 4418 5154 5890 6627 7363
125/32 + 122,7 1227 2454 3682 4909 6136 7363 8590 9817 11045 12272
- 114,7 1147 2294 3440 4587 5734 6881 8027 9174 10321 11468
+ = Outward stroke Note!

- = Return stroke Select a theoretical force 50-100%
larger than the force required
Main data: P1D-B

Cylinder Cylinder Piston rod Piston rod Cushioning Connection
designation bore area dia. area thread length sump- thread
tion2)
mm cm2 mm cm2 mm litre
P1D-B032••XXXX1) 32 8,0 12 1,1 M10x1,25 17 0,105 G1/8
P1D-B040••XXXX1) 40 12,6 16 2,0 M12x1,25 19 0,162 G1/4
P1D-B050••XXXX1) 50 19,6 20 3,1 M16x1,5 20 0,253 G1/4
P1D-B063••XXXX1) 63 31,2 20 3,1 M16x1,5 23 0,414 G3/8
P1D-B080••XXXX1) 80 50,3 25 4,9 M20x1,5 23 0,669 G3/8
P1D-B100••XXXX1) 100 78,5 25 4,9 M20x1,5 27 1,043 G1/2
P1D-B125••XXXX1) 125 122,7 32 8,0 M27x2 30 1,662 G1/2
Total mass including moving parts

Cylinder Total mass (kg) Total mass (kg)
designation at 0 mm stroke Supplement per 10 mm stroke
P1D-B032••XXXX1) 0,55 0,023
P1D-B040••XXXX1) 0,80 0,033
P1D-B050••XXXX1) 1,20 0,048
P1D-B063••XXXX1) 1,73 0,051
P1D-B080••XXXX1) 2,45 0,075
P1D-B100••XXXX1) 4,00 0,084
P1D-B125••XXXX1) 6,87 0,138
Mass moving parts only (for cushioning calculation)

Cylinder Mass moving parts (kg)
designation at 0 mm stroke Supplement per 10 mm stroke
P1D-B032••XXXX1) 0,13 0,009
P1D-B040••XXXX1) 0,24 0,016
P1D-B050••XXXX1) 0,42 0,025
P1D-B063••XXXX1) 0,50 0,025
P1D-B080••XXXX1) 0,90 0,039
P1D-B100••XXXX1) 1,10 0,039
P1D-B125••XXXX1) 2,34 0,063
1) XXXX = stroke
2) Free air consumption per 10 mm stroke for a double stroke at 6 bar

4
PDE2659TCUK
General technical data

Product type Standard cylinder according to ISO 15552
Bore size 32 - 125 mm
Stroke length 5-2800 mm
Versions P1D-B...MS Double acting
Cushioning Adjustable air cushioning
Position sensing Proximity sensor
Installation P1D cylinder and piston rod mountings
Mounting position Any
Operating and environmental data

Operating medium For best possible service life and trouble-free operation dry, filtered compressed air to ISO 8573-1:2010 quality
class 3.4.3 should be used. This specifies a dew point of +3oC for indoor operation (a lower dew point should be
selected for outdoor operation) and is in line with the air quality from most standard compressors with a standard
filter.
Operating pressure 0,5 bar to 10 bar
Ambient temperature
Standard version -20oC to +80oC
Pre-lubricated Further lubrication is normally not necessary. If additional lubrication is introduced it must be continued.
Corrosion resistance Resistance to corrosion and chemicals.
Material specification
4 6 1 2 11 10 15 1
3 14 7 16 8 9 13 12 5
Pos Part Specification
1 End covers Aluminium

2 Cylinder barrel Anodised aluminium
3 Piston rod Standard Austenitic Stainless steel X8CRNIS18-9 (AISI303)
Option Hard-chromium plated austenitic steel NF EN 10083-1 C45E
4 Piston rod nut Zinc plated steel
5 End cover screws Zinc plated steel
6 Scraper ring Polyurethane
7 Piston rod seal Polyurethane
8 Piston POM high tech polymer
9 Magnet Plastic coated magnetic material
10 Piston bearing POM high tech polymer
11 Piston seals Polyurethane
12 Piston bolt Zinc plated steel
13 O-rings Nitrile rubber
14 Piston rod bearing Multilayer PTFE/steel
15 Cushioning screws Stainless steel, DIN X 10 CrNiS 18 n9
16 Cushioning seals Polyurethane
Note on materials RoHS compliant

5
PDE2659TCUK
Cushioning characteristics
The diagram below is used for dimensioning of cylinders related The load is the sum of internal and external friction, plus any
to the cushioning capacity. The maximum cushioning capacity gravitational forces. At high relative load (pressure drop exceeding
shown in the diagram assumes the following: 1 bar), we recommend that for any given speed, the mass should
• Low load, i.e. low pressure drop across the piston be reduced by a factor of 2.5, or for a given mass, the speed
• Equilibrium speed should be reduced by a factor of 1.5. This is in relation to the
• Correctly adjusted cushioning screw maximum performance given in the diagram
• 6 bar at cylinder port
Speed [m/s]
4,0
3,0
2,0
1,5
Ø3 Ø4
2 0 Ø5 Ø6
1,0 0 3
Ø8 Ø1
0 00
Ø1
25
0,5
0,4
0,3
0,2
0,1
1 2 3 4 5 10 20 30 40 50 100 200 300 500 1000 2000 Mass [kg]

6
PDE2659TCUK
Guide for selecting suitable tubing

The selection of the correct size of tubing is often based on
experience, with no great thought to optimizing energy efficiency
and cylinder velocity. This is usually acceptable, but making a
rough calculation can result in worthwhile economic gains.
The following is the basic principle: The following prerequisites apply:

1. The primary line to the working valve could be over sized (this The cylinder load should be about 50% of the theoretical force
does not cause any extra air consumption and consequently (= normal load). A lower load gives a higher velocity and vice
does not create any extra costs in operation). versa. The tube size is selected as a function of the cylinder bore,
2. The tubes between the valve and the cylinder should, however, the desired cylinder velocity and the tube length between the
be optimized according to the principle that an insufficient bore valve and the cylinder.
throttles the flow and thus limits the cylinder speed, while an If you want to use the capacity of the valve to its maximum,
oversized pipe creates a dead volume which increases the air and obtain maximum speed, the tubing should be chosen so that
consumption and filling time. they at least correspond with the equivalent restriction diameter
(see description below), so that the tubing does not restrict the
The chart below is intended to help when selecting the correct total flow. This means that a short tubing must have at least the
size of tube to use between the valve and the cylinder. equivalent restriction diameter. If the tubing is longer, choose
it from the table below. Straight fittings should be chosenfor
highest flow rates. (Elbow and banjo fittings cause restriction.)
Cylinder Equivalent throttling bore 1) Tube Air flow

Ø [mm] ØOut./ØInt. Qn
[mm] [Nl/min]
4000
3800
11 –/16 3600
3400
3200
10 –/15 3000
Ø200 2800
–/14 2600
9 2400
2200
–/13 2000
8 1800
Ø160
–/12 1600
7 14/11 1400
1200
3 Ø125
6 12/10
1000
800
Ø100 5
10/8
2 Ø80 4
400
Ø63 8/6
3
200
1 Ø50
Ø40 2 6/4
Ø32 5/3
Ø25
Ø20 1 4/2,7
Ø16
Ø10
0,2 0,5 0,8 1,1 1,4 0 1 2 3 4 5 6 7 8 9 10

Cylinder speed [m/s] 4 Length of tubing [m]
1) The “equivalent throttling bore“ is a long throttle (for example a tube) or a series of throttles (for example, through a valve)
converted to a short throttle which gives a corresponding flow rate. This should not be confused with the “orifice“ which is
sometimes specified for valves. The value for the orifice does not normally take account of the fact that the valve contains a
number of throttles.
2) Qn is a measure of the valve flow capacity, with flow measured in litre per minute (l/min) at 6 bar(e) supply pressure and 1 bar
pressure drop across the valve.

7
PDE2659TCUK
Example 1 : Which tube diameter should be used? Valve series with respective flows in Nl/minute
A 50 mm bore cylinder is to be operated at 0.5 m/s. The tube
length between the valve and cylinder is 2 m. In the diagram we Valve series Qn in Nl/Min
follow the line from 50 mm bore to 0.5 m/s and get an “equivalent Interface PS1 120
throttling bore“ of approximately 4 mm. We continue out to the
Moduflex Size 1 - Double 4/2 single solenoid 165
right in the chart and intersect the line for a 2 m tube between
the curves for 4 mm (6/4 tube) and 6 mm(8/6 tube). This means Adex A05 173
that a 6/4 tube throttles the velocity somewhat, while an 8/6 tube H Series Micro - Single 5/3 APB 228
is a little too large. We select the 8/6 tube to obtain full cylinder Moduflex Size 1 - Single or Double 3/2 235
velocity.
H Series Micro - Double 3/2 276
Example 2 : What cylinder velocity will be obtained? H Series Micro - Single 5/2 282
A 80 mm bore cylinder will be used, connected by 8 m 12/10 Moduflex Size 1 - Single 4/2 310
tube to a valve with Qn 1200 Nl/min. What cylinder velocity will ISOMAX DX02 378
we get? We refer to the diagram and follow the line from 8 mm
H Series ISO HB 390
tube length up to the curve for 12/10 tube. From there, we go
horizontally to the curve for the Ø80 cylinder. We find that the Moduflex Size 2 - Single or Double 3/2 440
velocity will be about 0.5 m/s. PVL-B stackable inline valve 540
Adex A12 560
Example 3 : What is the minimum inner diameter
ISOMAX DX01 588
and maximum lenght of tube?
For a application a 125 mm bore cylinder will be used. Maximum Viking Xtrem P2LAX - G1/8" 660
velocity of piston rod is 0.5 m/s. The cylinder will be controlled by Moduflex Size 2 - Single 4/2 800
a valve with Qn 3200 Nl/min. What diameter of tube can be used H Series ISO HA 918
and what is maximum lenght of tube.
ISOMAX DX1 & DX Rail 1032
We refer to the diagram. We start at the left side of the diagram
cylinder Ø125. We follow the line until the intersection with the PVL-C stackable inline valve 1100
velocity line of 0.5 m/s. From here we draw a horizontal line in H Series ISO H1 1248
the diagram. This line shows us we need an equivalent throttling Viking Xtrem P2LBX - G1/4" 1290
bore of approximately 10 mm. Following this line horizontally
ISOMAX DX2 & DX Rail 2298
we cross a few intersections. These intersections shows us the
minimum inner diameter (rightside diagram) in combination with Viking Xtrem P2LCX - G3/8" 2460
the maximum length of tube (bottomside diagram). H Series ISO H2 2520
Viking Xtrem P2LDX - G1/2" 2658
For example:
Intersection one: When a tube (14/11) will be used, ISOMAX DX3 & DX Rail 3840
the maximum length of tube is 0.7 meter. H Series ISO H3 5022
Intersection two: When a tube (—/13) will be used,
the maximum length of tube is 3.7 meter.
Intersection three: When a tube (—/14) will be used,
the maximum length of tube is 6 meter.
Example 4 : Determining tube size and cylinder

velocity with a particular cylinder and valve?
For an application using a 40 mm bore cylinder with a valve with
Qn=800 Nl/min. The distance between the cylinder and valve has
been set to 5 m.
Tube dimension: What tube bore should be selected to obtain
the maximum cylinder velocity? Start at pipe length 5 m, follow
the line up to the intersection with 800 Nl/min. Select the next
largest tube diameter, in this case Ø10/8 mm.
Cylinder velocity: What maximum cylinder velocity will be
obtained? Follow the line for 800 Nl/min to the left until it
intersects with the line for the Ø40 mm cylinder. In this example,
the speed is just above 1.1 m/s.

8
PDE2659TCUK
P1D-B Pneumatic ISO Cylinders Order Key Code
Order Key Code (* 20 digits used only for the trunnion option)
15 digit order code 20 digit order code *

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
P 1 D – B 0 3 2 M S – 0 1 0 0 N D N N N
Cylinder version Stroke (mm)
e.g. 0100 = 100 mm
B Basic Line
Optional stroke lengths up
to 2800 mm. Standard
strokes see table page 9
Cylinder bore Scraper Function Piston rod material Seals

mm M Standard Double acting S Stainless steel Standard -20OC to +80OC
032 C Chrome plated steel Standard -20OC to +80OC
040
050
063 Intermediate trunnion mounting
080 90O 0O See page 17 for orientation details
100 D 6 Centre trunnion MT4, mid position
125 NNN digits 18-19-20
G 7 Trunnion MT4,
following XV measure
digits 18-19-20
Free trunnion 000
digits 18-19-20
Standard strokes
Standard strokes for all P1D-B cylinders comply with ISO 4393 (with the exception of stroke 40 mm).
Special strokes up to 2800 mm.
Order no Cylinder bore = Standard stroke (mm) = Stroke to special order

XXXX = Stroke (mm) 25 40 50 80 100 125 160 200 250 320 400 500 600 700 800 2800
P1D-B
P1D-B032MS-XXXX 32
P1D-B040MS-XXXX 40
P1D-B050MS-XXXX 50
P1D-B063MS-XXXX 63
P1D-B080MS-XXXX 80
P1D-B100MS-XXXX 100
P1D-B125MS-XXXX 125

9
PDE2659TCUK
Double acting with stainless steel piston rod

• Conforms to ISO 15552.
• Bore 32-125 mm.
• Double acting.
• Stainless steel piston rod.
• Robust design.
• Adjustable air cushioning.
• Retained stainless steel cushioning screws.
• Wide range of mountings and drop-in sensors
ISO
Cyl. bore Stroke Order code Cyl. bore Stroke Order code
mm mm mm mm
32 25 P1D-B032MS-0025 80 25 P1D-B080MS-0025
Conn. G1/8 40 P1D-B032MS-0040 Conn. G3/8
40 P1D-B080MS-0040
50 P1D-B032MS-0050 50 P1D-B080MS-0050
80 P1D-B032MS-0080 80 P1D-B080MS-0080
100 P1D-B032MS-0100 100 P1D-B080MS-0100
125 P1D-B032MS-0125 125 P1D-B080MS-0125
160 P1D-B032MS-0160 160 P1D-B080MS-0160
200 P1D-B032MS-0200 200 P1D-B080MS-0200
250 P1D-B032MS-0250 250 P1D-B080MS-0250
320 P1D-B032MS-0320 320 P1D-B080MS-0320
400 P1D-B032MS-0400 400 P1D-B080MS-0400
500 P1D-B032MS-0500 500 P1D-B080MS-0500
40 25 P1D-B040MS-0025 100 25 P1D-B100MS-0025
Conn. G1/4 40 P1D-B040MS-0040 Conn. G1/2
40 P1D-B100MS-0040
50 P1D-B040MS-0050 50 P1D-B100MS-0050
80 P1D-B040MS-0080 80 P1D-B100MS-0080
100 P1D-B040MS-0100 100 P1D-B100MS-0100
125 P1D-B040MS-0125 125 P1D-B100MS-0125
160 P1D-B040MS-0160 160 P1D-B100MS-0160
200 P1D-B040MS-0200 200 P1D-B100MS-0200
250 P1D-B040MS-0250 250 P1D-B100MS-0250
320 P1D-B040MS-0320 320 P1D-B100MS-0320
400 P1D-B040MS-0400 400 P1D-B100MS-0400
500 P1D-B040MS-0500 500 P1D-B100MS-0500
50 25 P1D-B050MS-0025 125 25 P1D-B125MS-0025
Conn. G1/4
40 P1D-B050MS-0040 Conn. G1/2
40 P1D-B125MS-0040
50 P1D-B050MS-0050 50 P1D-B125MS-0050
80 P1D-B050MS-0080 80 P1D-B125MS-0080
100 P1D-B050MS-0100 100 P1D-B125MS-0100
125 P1D-B050MS-0125 125 P1D-B125MS-0125
160 P1D-B050MS-0160 160 P1D-B125MS-0160
200 P1D-B050MS-0200 200 P1D-B125MS-0200
250 P1D-B050MS-0250 250 P1D-B125MS-0250
320 P1D-B050MS-0320 320 P1D-B125MS-0320
400 P1D-B050MS-0400 400 P1D-B125MS-0400
500 P1D-B050MS-0500 500 P1D-B125MS-0500
63 25 P1D-B063MS-0025
Conn. G3/8 40 P1D-B063MS-0040
50 P1D-B063MS-0050
80 P1D-B063MS-0080
100 P1D-B063MS-0100
125 P1D-B063MS-0125
160 P1D-B063MS-0160
200 P1D-B063MS-0200
250 P1D-B063MS-0250
320 P1D-B063MS-0320
400 P1D-B063MS-0400
500 P1D-B063MS-0500

10
PDE2659TCUK
P1D-B Basic
ISO 8675
L8 + Stroke
Dimensions (mm)
Cylinder bore AM B BA BG D D4 E EE G KK L2 L8 L12
mm mm mm mm mm mm mm mm mm mm mm mm mm
32 22 30 30 16 12 45,0 48,0
G1/8 28,5 M10x1,25 16,8 94 6,0
40 24 35 35 16 16 52,0 53,5
G1/4 33,0 M12x1,25 19,0 105 6,5
50 32 40 40 16 20 60,7 65,2
G1/4 33,5 M16x1,5 24,0 106 8,0
63 32 45 45 16 20 71,5 75,5
G3/8 39,5 M16x1,5 24,3 121 8,0
80 40 45 45 17 25 86,7 95,0
G3/8 39,5 M20x1,5 30,0 128 10,0
100 40 55 55 17 25 106,7 114,0
G1/2 44,5 M20x1,5 34,0 138 14,0
125 54 60 60 20 32 134,0 139,0
G1/2 51,0 M27x2 45,0 160 18,0
Cylinder bore OA PL PP R RT SS SW TT VA VD WH
mm mm mm mm mm mm mm mm mm mm mm
32 6,0 14,0 24,2 32,5 M6 5,5 10 4,2 3,5 4,5 26
40 6,0 16,0 27,5 38,0 M6 8,0 13 5,5 3,5 4,5 30
50 8,0 14,0 29,3 46,5 M8 9,0 17 7,5 3,5 4,5 37
63 8,0 16,6 30,8 56,5 M8 6,5 17 10,0 3,5 4,5 37
80 6,0 16,8 33,5 72,0 M10 0 22 11,5 3,5 4,5 46
100 6,0 20,5 37,5 89,0 M10 0 22 14,5 3,5 4,5 51
125 8,0 23,3 45,8 110,0 M12 0 27 15,0 5,5 6,5 65
Tolerances (mm)
Cylinder bore B BA L8 L9 R Stroke tolerance Stroke tolerance
mm mm mm mm up to stroke 500 mm for stroke over 500 mm
32 d11 d11 ±0,4
±2 ±0,5 +0,3/+2,0 +0,3/+3,0
40 d11 d11 ±0,7
±2 ±0,5 +0,3/+2,0 +0,3/+3,0
50 d11 d11 ±0,7
±2 ±0,6 +0,3/+2,0 +0,3/+3,0
63 d11 d11 ±0,8
±2 ±0,7 +0,3/+2,0 +0,3/+3,0
80 d11 d11 ±0,8
±3 ±0,7 +0,3/+2,0 +0,3/+3,0
100 d11 d11 ±1,0
±3 ±0,7 +0,3/+2,0 +0,3/+3,0
125 d11 d11 ±1,0
±3 ±1,1 +0,3/+2,0 +0,3/+3,0

11
PDE2659TCUK
P1D-B Pneumatic ISO Cylinders Mountings
Flange MF1/MF2 1 Foot brackets MS1 2 Pivot bracket with 3 Swivel eye bracket 4 Clevis bracket MP2 5
rigid bearing AB7 MP6
Ø 32 P1C-4KMB P1C-4KMF P1C-4KMDB PD23843 P1C-4KMTB

Ø 40 P1C-4LMB P1C-4LMF P1C-4LMDB PD23844 P1C-4LMTB
Ø 50 P1C-4MMB P1C-4MMF P1C-4MMDB PD23845 P1C-4MMTB
Ø 63 P1C-4NMB P1C-4NMF P1C-4NMDB PD23846 P1C-4NMTB
Ø 80 P1C-4PMB P1C-4PMF P1C-4PMDB PD23847 P1C-4PMTB
Ø 100 P1C-4QMB P1C-4QMF P1C-4QMDB PD23848 P1C-4QMTB
Ø 125 P1C-4RMB P1C-4RMF P1C-4RMDB PD23849 P1C-4RMTB
Clevis bracket MP4 6 Clevis bracket AB6 7 Pivot bracket with 8 3 and 4 positions Pivot brackets AT4 10
swivel bearing CS7 flange JP1 for MT* trunnion
Ø 32 PD23412 P1C-4KMCB KC5130 P1E-6KB0 PD23381

Ø 40 PD23413 P1C-4LMCB KC5131 P1E-6LB0 PD23382
Ø 50 PD23414 P1C-4MMCB KC5132 P1E-6MB0 PD23382
Ø 63 PD23415 P1C-4NMCB KC5133 P1E-6NB0 PD23383
Ø 80 PD23416 P1C-4PMCB KC5134 P1E-6PB0 PD23383
Ø 100 PD23417 P1C-4QMCB KC5135 P1E-6QB0 PD23384
Ø 125 PD23418 P1C-4RMCB KC5136 PD23384
Flange trunnion 11 Swivel rod eye AP6 12 Clevis AP2 13 Flexo coupling 14 Zinc-plated nut MR9 15
MT5/MT6 PM5 (pack of 10)
Ø 32 P1D-4KMYF P1C-4KRS P1C-4KRC P1C-4KRF P14-4KRPZ

Ø 40 P1D-4LMYF P1C-4LRS P1C-4LRC P1C-4LRF P14-4LRPZ
Ø 50 P1D-4MMYF P1C-4MRS P1C-4MRC P1C-4MRF P14-4MRPZ
Ø 63 P1D-4NMYF P1C-4MRS P1C-4MRC P1C-4MRF P14-4MRPZ
Ø 80 P1D-4PMYF P1C-4PRS P1C-4PRC P1C-4PRF P14-4PRPZ
Ø 100 P1D-4QMYF P1C-4PRS P1C-4PRC P1C-4PRF P14-4PRPZ
Ø 125 P1C-4RRS P1C-4RRC P1C-4RRF P14-4RRPZ
10
11
2
1
5
6
8
7 3
11
4 10
5
10
2
14 15
1
12
13

12
PDE2659TCUK
P1D-B Pneumatic ISO Cylinders Cylinder mountings
Flange MF1/MF2 1 Intended for fixed mounting of cylinder. Flange can be fitted
to front or rear end cover of cylinder.
Materials
Flange: Surface-treated steel
Mounting screws acc. to DIN 6912: Zinc-plated steel 8.8
Supplied complete with mounting screws for attachment

to cylinder.
Cyl. d1 FB TG1 E R MF TF UF l1 W* ZF* ZB* Weight Order code

bore H11 H13 JS14 JS14 JS14 -0,5 (kg)
32 30 7 32,5 45 32 10 64 80 5,0 16 130 123,5 0,23 P1C-4KMB
40 35 9 38,0 52 36 10 72 90 5,0 20 145 138,5 0,28 P1C-4LMB
50 40 9 46,5 65 45 12 90 110 6,5 25 155 146,5 0,53 P1C-4MMB
63 45 9 56,5 75 50 12 100 120 6,5 25 170 161,5 0,71 P1C-4NMB
80 45 12 72,0 95 63 16 126 150 8,0 30 190 177,5 1,59 P1C-4PMB
100 55 14 89,0 115 75 16 150 170 8,0 35 205 192,5 2,19 P1C-4QMB
125 60 16 110,0 140 90 20 180 205 10,5 45 245 230,5 3,78 P1C-4RMB
AH
S = Stroke length
I7
I9
AT
TR
TG1
Foot brackets MS1 2 Intended for fixed mounting of cylinder. Foot bracket can E
be fitted to front and rear end covers of cylinder.
Materials ØAB
AH
Foot bracket: Surface-treated steel
I7
I9
AT
TR AU AO
TG1
SA+S
Supplied in pairs with mounting screws for attachment to E
cylinder.
ØAB
Cyl. AB TG1 E TR AO AU AH l7 AT l9 SA* Weight Order code
bore H14 JS14 JS15 JS14 (kg) SA+S
AU AO
mm mm mm mm mm mm mm mm mm mm mm mm
32 7 32,5 45 32 10 24 32 30 4,5 17,0 142 0,06** P1C-4KMF
40 9 38,0 52 36 8 28 36 30 4,5 18,5 161 0,08** P1C-4LMF
50 9 46,5 65 45 13 32 45 36 5,5 25,0 170 0,16** P1C-4MMF
63 9 56,5 75 50 13 32 50 35 5,5 27,5 185 0,25** P1C-4NMF
80 12 72,0 95 63 14 41 63 49 6,5 40,5 210 0,50** P1C-4PMF
100 14 89,0 115 75 15 41 71 54 6,5 43,5 220 0,85** P1C-4QMF
125 16 110,0 140 90 22 45 90 71 8,0 60,0 250 1,48** P1C-4RMF ** Weight per item
S = Stroke length
Pivot bracket with 3 Intended for flexible mounting of cylinder. The

rigid bearing AB7 pivot bracket can be combined with clevis bracket MP2.
Material:
Pivot bracket: Aluminium
Bearing: Sintered oil-bronze bushing
Cyl. CK S5 K1 K2 G1 G2 EM G3 CA H6 R1 Weight Order code

bore H9 H13
JS14 JS14
JS14 JS15 (kg)
32 10 6,6 38 51 21 18 25,5 31 32 8 10,0 0,06 P1C-4KMDB
40 12 6,6 41 54 24 22 27,0 35 36 10 11,0 0,08 P1C-4LMDB
50 12 9,0 50 65 33 30 31,0 45 45 12 13,0 0,15 P1C-4MMDB
63 16 9,0 52 67 37 35 39,0 50 50 12 15,0 0,20 P1C-4NMDB
80 16 11,0 66 86 47 40 49,0 60 63 14 15,0 0,33 P1C-4PMDB
100 20 11,0 76 96 55 50 59,0 70 71 15 19,0 0,49 P1C-4QMDB
125 25 14,0 94 124 70 60 69,0 90 90 20 22,5 1,02 P1C-4RMDB

13
PDE2659TCUK
Swivel eye bracket MP6 4 Intended for use together with clevis bracket GA
Material:
Bracket: Aluminium
Swivel bearing acc. to DIN 648K: Hardened steel

to cylinder.
Cyl. E B1 B2 EN R1 R2 FL l2 L CN XD Z Weight Order code

bore H7 (kg)
32 47 10,5 - 14 16 12 22 6.0 12 10 142 4° 0,08 PD23843
40 55 12,0 - 16 21 14 25 6.0 15 12 160 4° 0,11 PD23844
50 65 12,0 51 16 23 16 27 7.0 15 12 170 4° 0,20 PD23845
63 78 15,0 - 21 27 19 32 7.0 20 16 190 4° 0,27 PD23846
80 95 15,0 - 21 29 21 36 10.0 20 16 210 4° 0,52 PD23847
100 115 18,0 - 25 34 24 41 10.0 25 20 230 4° 0,72 PD23848
125 140 22,0 - 31 40 30 50 10.5 30 25 275 4° 1,53 PD23849
S = Stroke length
Clevis bracket MP2 5 Intended for flexible mounting of cylinder. Clevis bracket
MP2 can be combined with clevis bracket MP4.
Material:
Clevis bracket: Aluminium
Pin: Surface hardened steel
Circlips according to DIN 471: Spring steel

to cylinder.
Cyl. C E UB CB FL L l2 CD MR XD Weight Order code

bore h14 H14 ±0,2 H9 (kg)
mm mm mm mm mm mm mm mm mm mm mm
32 53 47 45 26 22 13 6,0 10 10 142 0,08 P1C-4KMTB
40 60 55 52 28 25 16 6,0 12 12 160 0,11 P1C-4LMTB
50 68 65 60 32 27 16 7,0 12 12 170 0,14 P1C-4MMTB
63 78 78 70 40 32 21 7,0 16 16 190 0,29 P1C-4NMTB
80 98 95 90 50 36 22 10,0 16 16 210 0,36 P1C-4PMTB
100 118 115 110 60 41 27 10,5 20 20 230 0,64 P1C-4QMTB
125 139 140 130 70 50 30 10,5 25 25 275 1,17 P1C-4RMTB
S = Stroke length

14
PDE2659TCUK
Clevis bracket MP4 6 Intended for flexible mounting of cylinder. Clevis bracket
MP4 can be combined with clevis bracket MP2.
Material:
Clevis bracket: Aluminium
Supplied complete with mounting screws for attachment to

cylinder.
Cyl. E EW FL L l2 CD MR XD Weight Order code

bore ±0,2 H9 (kg)
mm mm mm mm mm mm mm mm mm
32 47 26 22 13 6,0 10 10 142 0,09 PD23412
40 55 28 25 16 6,0 12 12 160 0,13 PD23413
50 65 32 27 16 7,0 12 12 170 0,17 PD23414
63 78 40 32 21 7,0 16 16 190 0,36 PD23415
80 95 50 36 22 10,0 16 16 210 0,46 PD23416
100 115 60 41 27 10,5 20 20 230 0,83 PD23417
125 140 70 50 30 10,5 25 25 275 1,53 PD23418
S = Stroke length
Clevis bracket AB6 7 Intended for flexible mounting of cylinder. Clevis bracket GA
can be combined with pivot bracket with swivel bearing,
swivel eye bracket and swivel rod eye.
Material:
Clevis bracket: Surface-treated aluminium
Pin: Surface hardened steel
Locking pin: Spring steel
Circlips according to DIN 471: Spring steel

to cylinder.
Cyl. C E B2 B1 T B3 R2 L1 FL l2 L CN R1 XD* Weight Order code

bore d12 H14 ±0,2 F7 (kg)
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
32 41 45 34 14 3 3,3 17 11,5
22 5,5 12 10 11 142 0,09 P1C-4KMCB
40 48 52 40 16 4 4,3 20 12,0
25 5,5 15 12 13 160 0,13 P1C-4LMCB
50 54 65 45 21 4 4,3 22 14,0
27 6,5 17 16 18 170 0,17 P1C-4MMCB
63 60 75 51 21 4 4,3 25 14,0
32 6,5 20 16 18 190 0,36 P1C-4NMCB
80 75 95 65 25 4 4,3 30 16,0
36 10,0 20 20 22 210 0,58 P1C-4PMCB
100 85 115 75 25 4 4,3 32 16,0
41 10,0 25 20 22 230 0,89 P1C-4QMCB
125 110 140 97 37 6 6,3 42 24,0
50 10,0 30 30 30 275 1,75 P1C-4RMCB
S = Stroke length

15
PDE2659TCUK
Pivot bracket with 8 Intended for use together with clevis bracket GA.
swivel bearing CS7
Material:
Pivot bracket: Surface-treated steel
Swivel bearing acc. to DIN 648K: Hardened steel
Cyl. CN S5 K1 G1 G2 CH
bore H7 H13 JS14 K2 EU JS14 JS14 EN G3 JS15 H6 ER Z Order code
32 10 6.6 38 51 10.5 21 18 14 31 32 10 16 4° KC5130
40 12 6.6 41 54 12 24 22 16 35 36 10 18 4° KC5131
50 16 9.0 50 65 15 33 30 21 45 45 12 21 4° KC5132
63 16 9.0 52 67 15 37 35 21 50 50 12 23 4° KC5133
80 20 11 66 86 18 47 40 25 60 63 14 28 4° KC5134
100 20 11 76 96 18 55 50 25 70 71 15 30 4° KC5135
125 30 14 94 124 25 70 60 27 90 90 20 40 4° KC5136
3 and 4 positions flange 9 Mounting kit for back to back mounted cylinders,
JP1 3 and 4 position cylinders.
Material:
Mounting: Aluminium
Mounting screws: Zinc-plated steel 8.8
Cyl.
Weight
bore E TG ØFB MF A ØBA Order code
(kg)
mm mm mm mm mm mm mm
32 50 32.5 6.5 5 16 30 0.060 P1E-6KB0
40 60 38.0 6.5 5 16 35 0.078 P1E-6LB0
50 66 46.5 8.5 6 20 40 0.162 P1E-6MB0
63 80 56.5 8.5 6 20 45 0.194 P1E-6NB0
80 100 72.0 10.5 8 25 45 0.450 P1E-6PB0
100 118 89.0 10.5 8 25 55 0.672 P1E-6QB0
Pivot brackets AT4 for 10 Intended for use together with centre trunnion MT4.
trunnion MT*
Material:
Pivot bracket: Aluminium
Bearing: Composite
Supplied in pairs.
Cyl. d2
Weight
bore B1 B2 A C d1 H13 H1 H2 Order code
(kg)
mm mm mm mm mm mm mm mm mm
32 55 20 36 10.5 12 8.4 26 13 0.06 PD23381
40 55 20 36 12 16 8.4 26 13 0.06 PD23382
50 55 20 36 12 16 8.4 26 13 0.06 PD23382
63 65 25 42 13 20 10.5 30 15 0.10 PD23383
80 65 25 42 13 20 10.5 30 15 0.10 PD23383
100 75 28 50 16 25 13 40 20 0.175 PD23384
125 75 28 50 16 25 13 40 20 0.175 PD23384

16
PDE2659TCUK
Intermediate trunnion MT4 Intended for articulated mounting of cylinder. The trunnion is factory-
fitted in the centre of the cylinder or at an optional location specified
by the XV-measure – Combined with pivot brackets for MT4.
Material: zinc plated steel.
Trunnion with optional postion XV measure

The intermediate trunnion for the P1D-B is ordered with a letter D Mid position
in position 17 and desired XV-measure (3-digits measure in mm) in
positions 18-20.
Free trunnion
The centre trunnion for the P1D-B can also be ordered with the
intermediate trunnion loosely fitted to the cylinder (not fixed in
position). This allows the position to be established at the time of Minimum position XV Mid = X1 + 1/2 stroke
installation.
Ordered with a letter G in position 17 and 000 in positions
18-20.
Digits 17: G letters mean shafts at 90° to air ports
Digits17: 7 numbers mean shafts in line with air ports
Maximum position XV min
Cyl. L1 TL TM Ø TD R UW XV min X1 X2
bore P1D-B h14 h14 e9 P1D-B
mm mm
mm mm mm mm mm mm mm mm
32 18 12 50 12 1,0 52 89 73.0 57
XV Max = X2 + stroke
40 20 16 63 16 1,6 59 95 82.5 70
50 20 16 75 16 1,6 71 113 90.0 67 Orientation
63 26 20 90 20 1,6 84 118 97.5 77 0O to
80 26 20 110 20 1,6 105 132 110.0 88 O
ports
90 to
100 32 25 132 25 2,0 129 140 120.0 100 ports
125 33 25 180 25 2,0 159 168 145.0 122
Important: If the cylinder is ordered with a piston rod protusion (WH dimension), please add
this extra length to XVmin, XV and XVmax.
S = Stroke length, does not apply to cylinders with lock unit or with protusion of the piston rod
Flange trunnion 11 Intended for articulated mounting of cylinder. This trunnion

MT5/MT6 can be flange mounted on the front or rear end cover of all
P1D cylinders.
Individual trunnions have order code as shown to the right.
Material:
Trunnion: zinc plated steel
Screws: zinc plated steel, 8.8
Delivered complete with mounting screws for attachment to

the cylinder
Cyl. TM TL TD
bore H14 H14 E9 R UW L1 XV1 XV2 Weight Order code
mm mm mm mm mm mm mm mm mm (kg)
32 50 12 12 1.0 46 14 19.5 127.0 0.17 P1D-4KMYF
40 63 16 16 1.6 59 19 21.0 144.5 0.43 P1D-4LMYF
50 75 16 16 1.6 69 19 28.0 152.5 0.55 P1D-4MMYF
63 90 20 20 1.6 84 24 25.5 170.0 1.10 P1D-4NMYF
80 110 20 20 1.6 102 24 34.5 186.0 1.66 P1D-4PMYF
100 132 25 25 2.0 125 29 37.0 203.5 3.00 P1D-4QMYF

17
PDE2659TCUK
P1D-B Pneumatic ISO Cylinders Piston rod mountings
Swivel rod eye AP6 12 Swivel rod eye for articulated mounting of cylinder.
Can be combined with clevis bracket GA.
Maintenance-free.
Materials
Swivel rod eye: Zinc-plated steel
Swivel bearing according to DIN 648K: Hardened steel
According to ISO 8139

Cyl. B B CN EN N
Weight
bore A min max CE H9 H12 ER min O Z Order code
(kg)
mm mm mm mm mm mm mm mm KK LE mm mm mm
32 20 48.0 55 43 10 14 14 M10 x 1.25 15 17 10.5 12° 0.08 P1C-4KRS
40 22 56.0 62 50 12 16 16 M12 x 1.25 17 19 12.0 12° 0.12 P1C-4LRS
50 28 72.0 80 64 16 21 21 M16 x 1.5 22 22 15.0 15° 0.25 P1C-4MRS
63 28 72.0 80 64 16 21 21 M16 x 1.5 22 22 15.0 15° 0.25 P1C-4MRS
80 33 87.0 97 77 20 25 25 M20 x 1.5 26 32 18.0 15° 0.46 P1C-4PRS
100 33 87.0 97 77 20 25 25 M20 x 1.5 26 32 18.0 15° 0.46 P1C-4PRS
125 51 123.5 137 110 30 37 35 M27 x 2 36 41 25.0 15° 1.28 P1C-4RRS
Clevis AP2 13 Clevis for articulated mounting of cylinder.
Material
Clevis, clip: Galvanized steel
Pin: Hardened steel
Cyl. B B CK
Weight
bore A min max CE H9 / 11 CL CM O Order code
(kg)
mm mm mm mm mm mm mm mm KK LE mm
32 20 45.0 52 40 10 20 10 M10 x 1.25 20 28.0 0.09 P1C-4KRC
40 24 54.0 60 48 12 24 12 M12 x 1.25 24 32.0 0.15 P1C-4LRC
50 32 72.0 80 64 16 32 16 M16 x 1.5 32 41.5 0.35 P1C-4MRC
63 32 72.0 80 64 16 32 16 M16 x 1.5 32 41.5 0.35 P1C-4MRC
80 40 90.0 100 80 20 40 20 M20 x 1.5 40 50.0 0.75 P1C-4PRC
100 40 90.0 100 80 20 40 20 M20 x 1.5 40 50.0 0.75 P1C-4PRC
125 56 123.5 137 110 30 55 30 M27 x 2 54 72.0 2.10 P1C-4RRC

18
PDE2659TCUK
P1D-B Pneumatic ISO Cylinders Piston rod mountings
Flexo coupling PM5 14 Flexo coupling for articulated mounting of piston rod. Flexo
fitting is intended to take up axial angle errors within a range
of ±4°.
Material
Flexo coupling, nut: Zinc-plated steel
Supplied complete with galvanized adjustment nut.
Cyl.
Weight
bore B C D E ØF SW1 SW2 SW3 SW4 SW5 Order code
(kg)
mm KK mm mm mm mm mm mm mm mm
32 M10 x 1.25 20 23 73 31 21 12 30 30 19 17 0.21 P1C-4KRF
40 M12 x 1.25 24 23 77 31 21 12 30 30 19 19 0.22 P1C-4LRF
50 M16 x 1.5 32 32 108 45 33.5 19 41 41 30 24 0.67 P1C-4MRF
63 M16 x 1.5 32 32 108 45 33.5 19 41 41 30 24 0.67 P1C-4MRF
80 M20 x 1.5 40 42 122 56 33.5 19 41 41 30 30 0.72 P1C-4PRF
100 M20 x 1.5 40 42 122 56 33.5 19 41 41 30 30 0.72 P1C-4PRF
125 M27 x 2 54 48 147 51 39 24 55 55 32 41 1.80 P1C-4RRF
Nut MR9 15 Intended for fixed mounting of accessories to the piston rod.
Material: Zinc-plated steel
All P1D cylinders are delivred with a zinc-plated steel piston

rod nut, except P1D Ultra Clean, which is delivered with a
stainless steel piston rod nut instead.
According to DIN 439 B

Cyl. bore A B C Weight ** Order code
mm mm mm (kg) Nut MR9
32 17 5,0 M10x1,25 0,007 P14-4KRPZ

40 19 6,0 M12x1,25 0,010 P14-4LRPZ
50 24 8,0 M16x1,5 0,021 P14-4MRPZ
63 24 8,0 M16x1,5 0,021 P14-4MRPZ
80 30 10,0 M20x1,5 0,040 P14-4PRPZ
100 30 10,0 M20x1,5 0,040 P14-4PRPZ
125 41 13,5 M27x2 0,100 P14-4RRPZ
* Supplied as pack of 10 off

** Weight per item

19
PDE2659TCUK
P1D-B Pneumatic ISO Cylinders Sensors
Drop-in sensors
The P1D sensors can easily be installed from the side in the
sensor groove, at any position along the piston stroke.
The sensors are completely recessed and thus mechanically
protected. Choose between electronic or reed sensors and
several cable lengths and 8 mm and M12 connectors.
The same standard sensors are used for all P1D versions.
Electronic sensors Reed sensors

The electronic sensors are ”Solid State”, i.e. they have no moving The sensors are based on proven reed switches, which offer
parts at all. They are provided with short-circuit protection and reliable function in many applications. Simple installation, a
transient protection as standard. The built-in electronics make the protected position on the cylinder and clear LED indication are
sensors suitable for applications with high on and off switching important advantages of this range of sensors.
frequency, and where very long service life is required.
Technical data Technical data

Design GMR (Giant Magnetic Resistance) Design Reed element
magneto-resistive function Mounting From side, down into the sensor
Installation From side, down into the sensor groove, so-called drop-in
groove, so-called drop-in Output Normally open , or normally closed
Outputs PNP, normally open (also available in Voltage range 10-30 V AC/DC or
NPN design, normally closed, 10-120 V AC/DC
on request) 24-230 V AC/DC
Voltage range 10-30 VDC Load current max 500 mA for 10-30 V or
10-18 V DC, ATEX sensor max 100 mA for 10-120 V
Ripple max 10% max 30 mA for 24-230 V
Voltage drop max 2,5 V Breaking power (resistive) max 6 W/VA
Load current max 100 mA Actuating distance min 9 mm
Internal consumption max 10 mA Hysteresis max 1,5 mm
Actuating distance min 9 mm Repeatability accuracy 0,2 mm
Hysteresis max 1,5 mm On/off switching frequency max 400 Hz
Repeatability accuracy max 0,2 mm On switching time max 1,5 ms
On/off switching frequency max 5 kHz Off switching time max 0,5 ms
On switching time max 2 ms Encapsulation IP 67 (EN 60529)
Off switching time max 2 ms Temperature range –25 °C to +75 °C
Encapsulation IP 67 (EN 60529) Indication LED, yellow
Temperature range –25 °C to +75 °C Material housing PA12
–20 °C to +45 °C, ATEX sensor Material screw Stainless steel
Indication LED, yellow Cable PVC or PUR 3x0.14 mm2
Material housing PA 12 see order code respectively
Material screw Stainless steel
Cable PVC or PUR 3x0.25 mm2
see order code respectively

20
PDE2659TCUK
Electronic sensors Reed sensors
M8 Signal M12 M8 Signal M12

Signal –(+) V Signal
– V DC – V DC +(–) V –(+) V
+V DC AC/
+(–) V
DC
+ V DC AC/ DC AC/ DC
AC/ DC
Brown Brown
Black Black
Blue Blue
P8S-GCFPX
Brown
Blue
P8S-GRFLX / P8S-GRFLX2
Brown
Blue
Dimensions Sensor Installation

Sensors
Insert sensor Turn sensor Tighten screw
LED Torque
0,20 ±0,05Nm

21
PDE2659TCUK
Ordering data
Output/function Cable/connector Weight Order code
kg
Electronic sensors , 10-30 V DC
PNP type, normally open 0,27 m PUR-cable and 8 mm snap-in male connector 0,007 P8S-GPSHX
PNP type, normally open 0,27 m PUR-cable and M12 screw male connector 0,015 P8S-GPMHX
PNP type, normally open 3 m PVC-cable without connector 0,030 P8S-GPFLX
PNP type, normally open 10 m PVC-cable without connector 0,110 P8S-GPFTX
Reed sensors , 10-30 V AC/DC

Normally open 0,27 m PUR-cable and 8 mm snap-in male connector 0,007 P8S-GSSHX
Normally open 0,27 m PUR-cable and M12 screw male connector 0,015 P8S-GSMHX
Normally open 3 m PVC-cable without connector 0,030 P8S-GSFLX
Normally open 10 m PVC-cable without connector 0,110 P8S-GSFTX
Normally closed 5m PVC-cable without connector (1) 0,050 P8S-GCFPX
Reed sensors, 10-120 V AC/DC
Normally open 3 m PVC-cable without connector 0,030 P8S-GRFLX
Reed sensorer, 24-230 V AC/DC
Normally open 3 m PVC-cable without connector 0,030 P8S-GRFLX2
1) Without LED
Connecting cables with one connector

The cables have an integral snap-in female connector.
Type of cable Cable/connector Weight Order code

kg
Cables for sensors, complete with one female connector
Cable, Flex PVC 3 m, 8 mm Snap-in connector 0,07 9126344341
Cable, Flex PVC 10 m, 8 mm Snap-in connector 0,21 9126344342
Cable, Polyurethane 3 m, 8 mm Snap-in connector 0,01 9126344345
Cable, Polyurethane 10 m, 8 mm Snap-in connector 0,20 9126344346
Cable, Polyurethane 5 m, M12 screw connector 0,07 9126344348
Cable, Polyurethane 10 m, M12 screw connector 0,20 9126344349
Male connectors for connecting cables

Cable connectors for producing your own connecting cables. The connectors
can be quickly attached to the cable without special tools. Only the outer sheath
of the cable is removed. The connectors are available for M8 and M12 screw
connectors and meet protection class IP 65.
Technical data
Operating voltage max. 32 V AC/DC Order code
Connector Weight
Operating current per contact max. 4 A kg
Connection cross section 0.25...0.5mm2 M8 screw connector 0,017 P8CS0803J
(conductor diameter min 0.1mm)
M12 screw connector 0,022 P8CS1204J
Protection IP65 and IP67 when plugged and
screwed down (EN 60529)
Temperature range -25...+85 °C

22
PDE2659TCUK
P1D-B Pneumatic ISO Cylinders Seal kits
P1D-B Seal kits

Complete seal kits consisting of:
Piston seals
Cushioning seals
Piston rod seal
O-rings
Scraper ring
Material specification, see page 5
Order codes Order codes

Cyl.bore P1D cylinder version
mm Standard
P1D-B Standard 30g 9127394541

32 P1D-6KRNB
40 P1D-6LRNB
50 P1D-6MRNB
63 P1D-6NRNB
80 P1D-6PRNB
100 P1D-6QRNB
125 P1D-6RRNB
Seal kits
T1
T2
T2
Cyl.-dia Plastic
= Included in seal kit = Lubricated with grease piston
T1 NV T2 NV
mm Nm mm Nm mm
= Socket head = Locking fluid 32 4,5 6 8 6
40 11 8 8 6
50 20 10 20 8
= Tightening torque 63 20 10 20 8
Loctite 270 or Loctite 2701
80 40 14 20 6
locking fluid must be used 100 120 14 20 6
125 120 14 70 8

23
PDE2659TCUK
P1D-B Pneumatic ISO Cylinders Spare Parts
Order code key, spare parts
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
P 1 D – 8 0 3 2 D G – 0 1 0 0
8 Spare parts
Cylinder dia. Piston rod Piston rod Stroke** (mm) e.g.

mm 0100 = 100 mm
D Standard external thread G Stainless steel
032
G Standard internal thread H Hard-chromium plated
Any stroke up to
040 max. 2800 mm.
050 Cylinder barrel Cylinder barrel
** W
hen ordering piston
063 A Standard profile A Aluminium rods for cylinders with an
080 extended piston rod, add
100 together the stroke and
125
the extension in the order
key.
For example, a cylinder
with stroke 100 mm and a
piston rod extension of 25
mm is ordered with 0125
in the order number.
P1D with standard profile
Cylinder barrel type A
Piston rod

24
PDE2659TCUK
Specifying air quality (purity) in accordance with

ISO8573-1:2010, the international standard for
Compressed Air Quality
ISO8573-1 is the primary document used from the ISO8573 series as it is this
document which specifies the amount of contamination allowed in each cubic
metre of compressed air.
ISO8573-1 lists the main contaminants as Solid Particulate, Water and Oil. The purity levels for each contaminant are shown separately in tabular
form, however for ease of use, this document combines all three contaminants into one easy to use table.
Solid Particulate Water Oil
ISO8573-1:2010
CLASS Maximum number of particles per m3 Mass Vapour Total Oil (aerosol liquid and vapour)
Liquid
Concentration Pressure
g/m3
0,1 - 0,5 micron 0,5 - 1 micron 1 - 5 micron mg/m3 Dewpoint mg/m3
0 As specified by the equipment user or supplier and more stringent than Class 1
1 ≤ 20 000 ≤ 400 ≤ 10 - ≤ -70 °C - 0,01

2 ≤ 400 000 ≤ 6 000 ≤ 100 - ≤ -40 °C - 0,1
3 - ≤ 90 000 ≤ 1 000 - ≤ -20 °C - 1
4 - - ≤ 10 000 - ≤ +3 °C - 5
5 - - ≤ 100 000 - ≤ +7 °C - -
6 - - - ≤5 ≤ +10 °C - -
7 - - - 5 - 10 - ≤ 0,5 -
8 - - - - - 0,5 - 5 -
9 - - - - - 5 - 10 -
X - - - > 10 - > 10 > 10
Specifying air purity in accordance with ISO8573-1:2010 ISO8573-1:2010 Class zero

When specifying the purity of air required, the standard must always be • Class 0 does not mean zero contamination.
referenced, followed by the purity class selected for each contaminant
(a different purity class can be selected for each contamination if • Class 0 requires the user and the equipment manufacturer to
agree contamination levels as part of a written specification.
required).
• The agreed contamination levels for a Class 0 specification
An example of how to write an air quality specification is shown below:
should be within the measurement capabilities of the test
equipment and test methods shown in ISO8573 Pt 2 to Pt 9.
ISO 8573-1:2010 Class 1.2.1
• The agreed Class 0 specification must be written on all
ISO 8573-1:2010 refers to the standard document and its revision, documentation to be in accordance with the standard.
the three digits refer to the purity classifications selected for solid
particulate, water and total oil. Selecting an air purity class of 1.2.1 • Stating Class 0 without the agreed specification is meaningless
would specify the following air quality when operating at the and not in accordance with the standard.
standard’s reference conditions : • A number of compressor manufacturers claim that the delivered
air from their oil-free compressors is in compliance with Class 0.
Class 1 - Particulate
• If the compressor was tested in clean room conditions, the
In each cubic metre of compressed air, the particulate count should
contamination detected at the outlet will be minimal. Should the
not exceed 20,000 particles in the 0.1 - 0.5 micron size range, same compressor now be installed in typical urban environment,
400 particles in the 0.5 - 1 micron size range and 10 particles in the level of contamination will be dependent upon what is drawn
the 1 - 5 micron size range. into the compressor intake, rendering the Class 0 claim invalid.
Class 2 - Water • A compressor delivering air to Class 0 will still require purification
A pressure dewpoint (PDP) of -40°C or better is required and no equipment in both the compressor room and at the point of use
liquid water is allowed. for the Class 0 purity to be maintained at the application.
Class 1 - Oil • Air for critical applications such as breathing, medical, food, etc
typically only requires air quality to Class 2.2.1 or Class 2.1.1.
In each cubic metre of compressed air, not more than 0.01mg of
oil is allowed. This is a total level for liquid oil, oil aerosol and oil • Purification of air to meet a Class 0 specification is only cost
vapour. effective if carried out at the point of use.

25
PDE2659TCUK

26
PDE2659TCUK

27
Parker Worldwide
Europe, Middle East, Africa IE – Ireland, Dublin North America
Tel: +353 (0)1 466 6370
AE – United Arab Emirates, [email protected] CA – Canada, Milton, Ontario
Dubai Tel: +1 905 693 3000
Tel: +971 4 8127100 IL – Israel
Tel: +39 02 45 19 21 US – USA, Cleveland
[email protected]
[email protected] Tel: +1 216 896 3000
AT – Austria, Wiener Neustadt
Tel: +43 (0)2622 23501-0 IT – Italy, Corsico (MI)
[email protected] Tel: +39 02 45 19 21 Asia Pacific
[email protected] AU – Australia, Castle Hill
AT – Eastern Europe, Wiener
Neustadt KZ – Kazakhstan, Almaty Tel: +61 (0)2-9634 7777
Tel: +43 (0)2622 23501 900 Tel: +7 7273 561 000 CN – China, Shanghai
[email protected] [email protected] Tel: +86 21 2899 5000
AZ – Azerbaijan, Baku NL – The Netherlands, Oldenzaal HK – Hong Kong
Tel: +994 50 2233 458 Tel: +31 (0)541 585 000 Tel: +852 2428 8008
[email protected] [email protected]
IN – India, Mumbai
BE/LU – Belgium, Nivelles NO – Norway, Asker Tel: +91 22 6513 7081-85
Tel: +32 (0)67 280 900 Tel: +47 66 75 34 00
[email protected] JP – Japan, Tokyo
[email protected]
Tel: +81 (0)3 6408 3901
BG – Bulgaria, Sofia PL – Poland, Warsaw
Tel: +48 (0)22 573 24 00 KR – South Korea, Seoul
Tel: +359 2 980 1344
[email protected] Tel: +82 2 559 0400
[email protected]
PT – Portugal MY – Malaysia, Shah Alam
BY – Belarus, Minsk
Tel: +351 22 999 7360 Tel: +60 3 7849 0800
Tel: +48 (0)22 573 24 00
[email protected] [email protected] NZ – New Zealand, Mt Wellington
RO – Romania, Bucharest Tel: +64 9 574 1744
CH – Switzerland, Etoy
Tel: +41 (0)21 821 87 00 Tel: +40 21 252 1382 SG – Singapore
[email protected] [email protected] Tel: +65 6887 6300
CZ – Czech Republic, Klecany RU – Russia, Moscow TH – Thailand, Bangkok
Tel: +420 284 083 111 Tel: +7 495 645-2156 Tel: +662 186 7000
TW – Taiwan, Taipei
DE – Germany, Kaarst SE – Sweden, Spånga Tel: +886 2 2298 8987
Tel: +49 (0)2131 4016 0 Tel: +46 (0)8 59 79 50 00
South America
DK – Denmark, Ballerup SL – Slovenia, Novo Mesto
Tel: +45 43 56 04 00 Tel: +386 7 337 6650 AR – Argentina, Buenos Aires
ES – Spain, Madrid TR – Turkey, Istanbul BR – Brazil, Sao Jose dos Campos

Tel: +34 902 330 001 Tel: +90 216 4997081 Tel: +55 800 727 5374
[email protected] [email protected] CL – Chile, Santiago
FI – Finland, Vantaa UA – Ukraine, Kiev Tel: +56 2 623 1216
Tel: +358 (0)20 753 2500 Tel: +48 (0)22 573 24 00 MX – Mexico, Toluca
FR – France, Contamine s/Arve UK – United Kingdom, Warwick
Tel: +33 (0)4 50 25 80 25 Tel: +44 (0)1926 317 878
GR – Greece, Athens ZA – South Africa, Kempton Park
Tel: +30 210 933 6450 Tel: +27 (0)11 961 0700
European Product Information Centre
HU – Hungary, Budaörs Free phone: 00 800 27 27 5374
Tel: +36 23 885 470 (from AT, BE, CH, CZ, DE, DK, EE, ES, FI,
[email protected] FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT, RU,
SE, SK, UK, ZA)
© 2017 Parker Hannifin Corporation. All rights reserved. Catalogue PDE2659TCUK - V8 - June 2017

Pneumatic Cylinders: Series P1D-B Basic Line - Ø32 To Ø125 MM According To ISO 15552

Uploaded by

Copyright:

Available Formats

Pneumatic Cylinders: Series P1D-B Basic Line - Ø32 To Ø125 MM According To ISO 15552

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pneumatic Cylinders: Series P1D-B Basic Line - Ø32 To Ø125 MM According To ISO 15552

Uploaded by

Copyright:

Available Formats

aerospace

Parker Hannifin Corporation

Anodised body Polyurethane seals Magnetic pistons

Surface treated steel

All P1D-B cylinders for

Standard cylinders P1D-B, ISO 15552

Parker Hannifin Corporation

Cylinder forces, double acting variants

+ = Outward stroke Note!

Main data: P1D-B

Total mass including moving parts

Mass moving parts only (for cushioning calculation)

Parker Hannifin Corporation

General technical data

Operating and environmental data

Pos Part Specification

1 End covers Aluminium

Parker Hannifin Corporation

Parker Hannifin Corporation

Guide for selecting suitable tubing

The following is the basic principle: The following prerequisites apply:

Cylinder Equivalent throttling bore 1) Tube Air flow

0,2 0,5 0,8 1,1 1,4 0 1 2 3 4 5 6 7 8 9 10

Parker Hannifin Corporation

Example 4 : Determining tube size and cylinder

Parker Hannifin Corporation

15 digit order code 20 digit order code *

Cylinder bore Scraper Function Piston rod material Seals

Order no Cylinder bore = Standard stroke (mm) = Stroke to special order

Parker Hannifin Corporation

Double acting with stainless steel piston rod

Parker Hannifin Corporation

Parker Hannifin Corporation

Ø 32 P1C-4KMB P1C-4KMF P1C-4KMDB PD23843 P1C-4KMTB

Ø 32 PD23412 P1C-4KMCB KC5130 P1E-6KB0 PD23381

Ø 32 P1D-4KMYF P1C-4KRS P1C-4KRC P1C-4KRF P14-4KRPZ

Parker Hannifin Corporation

Supplied complete with mounting screws for attachment

Cyl. d1 FB TG1 E R MF TF UF l1 W* ZF* ZB* Weight Order code

Pivot bracket with 3 Intended for flexible mounting of cylinder. The

Cyl. CK S5 K1 K2 G1 G2 EM G3 CA H6 R1 Weight Order code

Parker Hannifin Corporation

Supplied complete with mounting screws for attachment

Cyl. E B1 B2 EN R1 R2 FL l2 L CN XD Z Weight Order code

Supplied complete with mounting screws for attachment

Cyl. C E UB CB FL L l2 CD MR XD Weight Order code

Parker Hannifin Corporation

Supplied complete with mounting screws for attachment to

Cyl. E EW FL L l2 CD MR XD Weight Order code

Supplied complete with mounting screws for attachment

Cyl. C E B2 B1 T B3 R2 L1 FL l2 L CN R1 XD* Weight Order code

Parker Hannifin Corporation

Parker Hannifin Corporation

Trunnion with optional postion XV measure

Flange trunnion 11 Intended for articulated mounting of cylinder. This trunnion

Delivered complete with mounting screws for attachment to

Parker Hannifin Corporation

According to ISO 8139

Clevis AP2 13 Clevis for articulated mounting of cylinder.