Tantalum Niobium

Polymer, Tantalum and
Niobium Oxide Capacitors
062122
IMPORTANT INFORMATION/DISCLAIMER
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet or
made available on the website are subject to change. The customer is responsible for checking and verifying
the extent to which the Information contained in this publication is applicable to an order at the time the order is
placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee,
warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KYOCERA AVX’s knowledge of typical operating
conditions for such applications, but are not intended to constitute and KYOCERA AVX specifically disclaims
any warranty concerning suitability for a specific customer application or use.
ANY USE OF PRODUCT OUTSIDE OF SPECIFICATIONS OR ANY STORAGE OR INSTALLATION

INCONSISTENT WITH PRODUCT GUIDANCE VOIDS ANY WARRANTY.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by KYOCERA AVX with reference to the use of KYOCERA AVX’s products is given without
regard, and KYOCERA AVX assumes no obligation or liability for the advice given or results obtained.
Although KYOCERA AVX designs and manufactures its products to the most stringent quality and safety
standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer
applications which require a high degree of reliability or safety should employ suitable designs or other
safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an
electrical component does not result in a risk of personal injury or property damage.
Unless specifically agreed to in writing, KYOCERA AVX has not tested or certified its products, services or
deliverables for use in high risk applications including medical life support, medical device, direct physical
patient contact, water treatment, nuclear facilities, weapon systems, mass and air transportation control,
flammable environments, or any other potentially life critical uses. Customer understands and agrees that
KYOCERA AVX makes no assurances that the products, services or deliverables are suitable for any high-
risk uses. Under no circumstances does KYOCERA AVX warrant or guarantee suitability for any customer
design or manufacturing process.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume
that all safety measures are indicted or that other measures may not be required.
Polymer, Tantalum and Niobium Oxide Capacitors
Table of Contents
SECTION 1: SOLID TANTALUM & NIOBIUM OXIDE SECTION 2: SOLID CONDUCTIVE POLYMER
CHIP CAPACITORS ELECTROLYTIC CHIP CAPACITORS
Tantalum and Niobium Oxide Products Introduction and Road Map........... 3 TCJ Series – Standard and Low Profile - J-Lead............................................186
Resin Molded Solid Tantalum Chip, J-Lead TCM Series – Multianode Ultra Low ESR - J-Lead..........................................199
TAJ – Standard & Low Profile.............................................................................. 5 TCN Series – High CV/cc - Undertab. .............................................................203
TAJ Series – Automotive Product Range. ........................................................ 18 J-CAP™ Series – Highest Joules/cc - Undertab.............................................209
F92 Series – Low Profile. ..................................................................................25 F38 Series – Miniature - Undertab.................................................................. 217
F93 Series..........................................................................................................30 TCO Series – High Temperature Automotive Polymer

Chip Capacitors. .......................................................................221
F93-AJ6 Series – Automotive Product Range.................................................35
TCQ Series – Automotive - J-Lead..................................................................225
High CV Resin Molded Solid Tantalum Chip
SECTION 3: LEADED TANTALUM
TLJ Series – J-Lead..........................................................................................40
Introduction
TLN Series – Undertab......................................................................................46
Dipped Radial Capacitors
TLN PulseCap™ Series – High Capacitance - Undertab..................................50
TAP/TEP Series Wire Form Outline......................................................... 231
F98 Series – Undertab. .....................................................................................54 TAP Series................................................................................................. 232
F98-AS1 Series – Fused Tantalum Chip - Undertab.........................................58 TEP Series................................................................................................. 235
F98-AJ6 Series – Resin-Molded Chip, High CV Facedown - TAP/TEP Series Tape & Reel.................................................................... 238
Automotive Range. .............................................................. 61
SECTION 4: TECHNICAL SUMMARY AND .
Low ESR Resin Molded Solid Tantalum Chip, J-Lead APPLICATION GUIDELINES
TPS Series – Standard & Low Profile................................................................64 Introduction.....................................................................................................240
TPS Series – Automotive Product Range......................................................... 76 Section 1: Electrical Characteristics And Explanation Of Terms....................242
Section 2: A.C. Operation, Ripple Voltage And Ripple Current........................247
F91 Series..........................................................................................................84
Section 3: Reliability And Calculation Of Failure Rate.....................................250
F91-AJ6 Series – Automotive Product Range. ................................................88
Section 4: Application Guidelines for Tantalum and OxiCap® Capacitors......253
TPM Series – Multianode, Ultra Low ESR......................................................... 91
Section 5: Terminations...................................................................................254
High Performance Resin Molded Solid Tantalum Chip Section 6: Mechanical And Thermal Properties Of Capacitors......................255
TRJ Series – Enhanced Reliability Professional & Section 7: Epoxy Flammability........................................................................256
Automotive Grade - J-Lead..........................................................96 Section 8: Qualification Approval Status.........................................................256
F97 Series – Enhanced Reliability Professional & Product Safety and Environmental Information Data................................260
Automotive Grafe - J-Lead. ........................................................105 Tantalum & Niobium Oxide Capacitors
F97-HT3 Series – High Temperature (135°C max) - J-Lead........................... 110 (excluding F-series) – Tape & Reel Packaging. .............................................262
TRM Series – Enhanced Reliability Professional F-Series Capacitors – Tape & Reel Packaging. .............................................265
Grade Multianode - J-Lead....................................................... 115
TAP/TEP TECHNICAL SUMMARY AND
TMJ SMD S1gma™ Series – LAT* Professional Grade - J-Lead....................120 APPLICATION GUIDELINES
THJ Series – High Temperature (175°C max.) - J-Lead..................................126 Section 1: Electrical Characteristics And Explanation Of Terms....................266
THJ Extended Series – High Temperature (200°C max.) - J-Lead................132 Section 2: A.c. Operation — Ripple Voltage And Ripple Current. ....................270
Section 3: Reliability And Calculation Of Failure Rate.....................................271
TACmicrochip®
Section 4: Application Guidelines For Tantalum Capacitors. .........................274
TAC Series – Standard and Low Profile TACmicrochip ®. ...............................136
Section 5: Mechanical And Thermal Properties, Leaded Capacitors.............274
TLC Series – High CV TACmicrochip ®............................................................143
Questions and Answers ................................................................................275
TPC Series – Low ESR TACmicrochip ® ..........................................................148
Software Tools........................................................................................... 279
Conformal Coated Tantalum Chip
Products Listing........................................................................................ 280
F95 Series – Standard ....................................................................................153
F95 Audio Series – Optimized for Audio Applications...................................157 Available Range of Sample Kits.......................................................... 281
*LAT = Lot Acceptance Tested
F72/F75 Series – Low Profile and High CV....................................................160
Resin Molded OxiCap® Solid Niobium Oxide Chip, J-Lead

NOJ Series – Standard and Low Profile OxiCap ®...........................................164
NLJ Series – High CV OxiCap ®. ...................................................................... 171
NOS Series – Low ESR OxiCap ®...................................................................... 175
NOM Series – Multianode Ultra-Low ESR OxiCap ®. .......................................182
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
– polymer, tantalum and niobium oxide capacitors –

SECTION 1: SOLID TANTALUM & NIOBIUM OXIDE
CHIP CAPACITORS
Section 1: Solid Tantalum & Niobium Oxide Chip Capacitors
Tantalum and Niobium Oxide Products Introduction and Road Map
APPLICATIONS
IATF16949, AEC-Q200
FOCUS ON QUALITY
KYOCERA AVX is committed to Total Customer Satisfaction by All Tantalum division plants are approved to ISO 9001:2015 quality
meeting or exceeding expectations in product performance and standard; IATF 16949:2016 (Automotive Quality System Requirements)
product innovation while providing comprehensive technical support and ISO 14001:2015 environmental standards. Defined series of
combined with matchless service. conductive polymer, tantalum and NbO OxiCap® capacitors meet the
requirements of AEC-Q200.
KYOCERA AVX Corporation Goals: OH
Plant Certifications ISO IATF ESA IECQ
• To provide world class service in the manufacture and supply of SAS
Site Location 9001 14001 16949 ESCC CECC 18001
electronic components, while maintaining a positive return on
Adogawa Japan   
investment.
Lanskroun Czech     
• Consistently supplying product of the highest quality with exceptional
San Salvador El Salvador    
service throughout the entire supply chain.
• New or improved products, processes or services will be qualified to
established standards of quality and reliability. Please see KYOCERA AVX web site www.kyocera-avx.com for the
latest certification status.
The above objectives shall be achieved by the following codes of KYOCERA AVX with headquarters in Fountain Inn, South Carolina,
practice: USA, is a leading global supplier of passive electronic components.
1. Continuous evaluation of all customer expectations, bringing to KYOCERA AVX solid electrolytic capacitors are produced in major
bear all KYOCERA AVX resources to meet their future needs. world regions: Lanskroun, Czech Republic (Europe), San Salvador, El
2. Continually fostering and promoting a culture of continuous Salvador (Americas) and Adogawa in Japan (Asia), giving full access
improvement through training and empowered participation of to our global customers and enabling optimum service for our regional
employees at all levels of the company. customer base. High reliability specilised tantalums are produced in
3. Continuous Process Improvement using sound engineering KYOCERA AVX Biddeford, Maine,US.
principles to enhance existing equipment, materials and
processes. This includes the application of the science of SPC
focused on improving the Process Capability Index, Cpk.
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 1
110121

Introduction
Tantalum
Initiative (GeSI) Conflict-Free Smelter program has been verified.
Niobium oxide is a ceramic material that can be refined to the same
capacitor grade powder morphology as high purity tantalum powder,
enabling capacitor anode manufacture by identical processes.
The dielectric layer is an oxide of the anodic material – tantalum or
niobium pentoxide. These oxides can be formed in very thin layers,
which, combined with their unique insulating properties, enables very
high and stable capacitance values to be achieved.
The cathode is made from manganese dioxide, a semiconducting
The Tantalum division of KYOCERA AVX produces a wide range of material (for standard tantalum and niobium oxide solid electrolytic
solid electrolytic capacitors. Typically, the construction consists of capacitors) or conductive polymer (for polymer solid electrolytic
a 1st electrode (anode), an insulating layer (dielectric) and a 2nd capacitors).
electrode (cathode) system.
The anode is manufactured either from pure tantalum or niobium KYOCERA AVX is world wide leading Tantalum capacitor
oxide powder. Tantalum is an element extracted from ores found manufacturer with widest range of capacitors from smallest to large
alongside tin and niobium deposits; the major sources of supply are case sizes, from consumer to automotive, medical and aerospace
located in Brazil, Africa and Australia. level applications. KYOCERA AVX has a leading market position in all
world regions. Call us first - KYOCERA AVX your global partner.
Since December 1st, 2011, KYOCERA AVX has exclusively sourced
the tantalum powder and wire used to manufacture its tantalum
capacitors from smelters whose compliance with the Electronic
Industry Code of Conduct (EICC) and the Global e-Sustainability
TECHNOLOGY TRENDS
Miniaturization (downsizing in both real estate and height profile)
while retaining high capacitance has been the most significant driver
Tantalum Powder
Tantalum CV/g
Powder CV/g
of capacitor requirements for the latest electronic hardware designs. 300
Solid electrolytic capacitors are one of the best technologies to offer
250
very high capacitance value in small dimensions.
200
The amount of capacitance achievable in solid electrolytic capacitors
CV/g (K)
is directly related to the characteristics of the powder used to 150

manufacture the anode. Capacitance x voltage per gram (CV/g) is 100
the measure used to define the volumetric efficiency of a powder.
The following graph shows how the capability in CV/g has steadily 50
increased over time, allowing the production of greater capacitance
0
values within the same physical outline. These powder improvements
1980 1985 1990 1995 2000 2005 2010 2015
have been achieved through close development with material
suppliers. KYOCERA AVX are committed to driving the available The next significant driver is equivalent series resistance (ESR)
technology forward, demonstrated by extended ratings continually reduction. As DC-DC converter and power supply designs increase
being introduced in all technologies, including conductive polymer in power density, they require lower ESR output capacitors to control
tantalum, TACmicrochip®, and NbO OxiCap®. ripple. KYOCERA AVX maintains a continuous ESR improvement
program to ensure low ESR capacitor capability is maintained across
the widest operating voltage range to keep pace with emerging
industry requirements.
*Niobium Oxide Capacitors are manufactured and sold under patent license from Cabot Corporation, Boyertown, Pennsylvania U.S.A.
2 online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
051117

Tantalum and Niobium Oxide Products Introduction and Road Map
Solid Electrolytic Capacitors Road Map
Professional Space
Commercial & High-Temp CECC COTS+* DLA* MIL-PRF* Medical*
Level*
Automotive
SMD Conventional (MnO2 Cathode) Tantalum Solid Electrolytic Chip Capacitors
TAJ
TAJ TAJ CECC
Automotive F97-HT3 135°C DLA
30801-011
TAJ TRJ (auto) (auto) 95158
30801-005
J-lead Low Profile Professional TAJ ESCC T4J
CWR11
termination F93-AJ6 THJ 175ºC 3012-001 HRC4000
Standard F93
(auto) (auto) DLA
TBJ
F92 07016
F97 (auto) THJ 200ºC
Low Profile
Conformal F95
TPS TPS DLA TBJ

Low ESR Automotive 95158 SRC9000
J-lead F91-AJ6 THJ 175ºC TBJ
Low ESR
termination (auto) (auto) Low ESR DLA TES ESCC
F91
TRJ (auto) 07016 3012-004
Low ESR
TBM
TPM SRC9000
Ultra Low ESR J-lead TRM TBM
Ultra Low
Multianode termination (auto) Ultra Low ESR TES ESCC
ESR
3012-004
J-lead TMJ TMJ
Low DCL
termination Low DCL S1gma™
J-lead TLJ
termination
F98
TLN
High CV Undertab Undertab
termination TLN
PulseCap™
Confomal F72/75
TAZ TAZ
CWR09
SRC9000 HRC5000
Standard TAZ
CWR19 CWR T4Z
CWR High CV “T” Level HRC4000
09, 19, 29* TAZ
TAZ SRC9000
HRC5000
Low ESR TAZ CWR29
CWR T4Z
“T” Level HRC4000
F98-AS1
Fused
Fused
TCP DLA TCP

Modules TCP SRC9000
Ultra Low ESR 09009 HRC5000
THH
Hermetic Package* THH THH
230ºC
SMD Conductive Polymer Tantalum Solid Electrolytic Chip Capacitors
Standard TCJ TCB

J-lead TCQ TCO 150ºC TCS ESCC
termination Automotive (auto) 3012-006
Ultra low ESR TCM TCS
Multianode Multianode
J-CAP™
High Energy
TCN
Undertab TCN
Low Profile termination Undertab
Miniature F38
Hermetic Package* TCH TCH TCH
* see High Reliability Tantalum Catalog under development

Note: For specific requirements and questions please contact KYOCERA AVX
030321

Solid Electrolytic Capacitors Road Map
Professional Space
Commercial & High-Temp CECC COTS+* DLA* MIL-PRF* Medical*
Level*
Automotive
TACmicrochip® SMD Tantalum Solid Electrolytic Chip Capacitors
TBC
HRC5000
TBC TBC
Standard TAC TBC CWR15
microchip SRC9000 HRC6000
T4C
leadless
HRC4000
design
High CV TLC
Low ESR TPC
OxiCap® SMD Niobium Oxide Solid Electrolytic Chip Capacitors

Standard NOJ
NOJ
Low ESR J-lead NLJ
termination
Low ESR
NOM NOM
Multianode
Radial Leaded Tantalum Solid Electrolytic Capacitors (Resin Dipped)
TAP CECC
Resin Dipped Radial leads TAP/TEP Radial
30201-032
Wet Electrolytic Tantalum Capacitors

Tantalum Wet Electrolytic Capacitors
TWA-Y
200°C DLA TWC
TWA M39006
Axial TWC-Y 93026 SRW9000
Wet* TWD TWA
leads 200°C
TWA-X DLA TWS
TWS
230°C 13017 SRW9000
Wet* Modules TWM
*see High Reliability Tantalum Catalog

Note: For specific requirements and questions please contact KYOCERA AVX
KYOCERA AVX SMD SOLID ELECTROLYTIC CAPACITORS SERIES AND CONSTRUCTIONS

KYOCERA AVX SMD solid electrolytic capacitors family consists of two types of anode materials (standard Tantalum and unique Niobium Oxide)
and two types of cathode materials (conventional MnO2 and Conductive polymer) in several styles of capacitor constructions. KYOCERA AVX also
offers wide range of tradicional leaded solid electrolytic tantalum capacitors and leaded Wet Electrolytic tantalums. Case sizes of KYOCERA AVX
Capacitors are denoted by single letter or symbol in the part number. Please note that the case size letter is always related to the specific product
series. For more details please loog at the specific series information, or general guides related or contact KYOCERA AVX.
CONDUCTIVE CONVENTIONAL NIOBIUM

POLYMER TANTALUM OXIDE
TC Series T Series N Series
T Cx T xx N xx
F Series F Series
F38 F xx
– conductive – MnO 2 – MnO2

CATHODE
polymer
DIELECTRIC Ta2O5 Ta2O5 Nb2O5
ANODE Niobium
+ Tantalum + Tantalum +
Oxide
FIVE CAPACITOR CONSTRUCTION STYLES

J-lead Undertab TACmicrochip® Conformal Hermetic
Tantalum series Tantalum series All microchip series F95 TCH

Polymer series Polymer series F72 THH
All OxiCap ® series F75
030321

Resin Molded Solid Tantalum Chip, J-Lead
TAJ – Standard & Low Profile
TAJ Series
Standard and Low Profile Tantalum Capacitors
FEATURES
• General Purpose SMT Chip Tantalum Series
• 100% Surge Current Tested
• 17 Case Sizes Available, Standard and Low Profile
Down to 1mm Maximum Height
• CV Range: 0.10 - 2200μF / 2.5 - 50V
• J-Lead Construction
APPLICATIONS
• General Low Power DC/DC and LDO
• Entertainment / Infotainment Systems
• Height Restricted Design
STANDARD CASE DIMENSIONS: millimeters (inches)

EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
MARKING E
U
2917
2924
7343-43
7361-43
7.30 (0.287)
7.30 (0.287)
4.30 (0.169)
6.10 (0.240)
4.10 (0.162)
4.10 (0.162)
2.40 (0.094)
3.10 (0.122)
1.30 (0.051)
1.30 (0.051)
4.40 (0.173)
4.40 (0.173)
V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
A, B, C, D, E, F, H, K, S, T, U, V, W, X, Y CASE W1 dimension applies to the termination width for A dimensional area only.
LOGO Capacitance Value in pF

227 = 220µF
LOW PROFILE CASE DIMENSIONS: millimeters (inches)
EIA EIA L±0.20 W+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Polarity
Band 227 A Rated Voltage Code
A = 10V
Code
Code Metric (0.008) -0.10 (0.004)
H Max.
(0.008) -0.20 (0.008)
S Min.
(Anode+)
XXXXX ID Code F 2312 6032-20 6.00 (0.236) 3.20 (0.126) 2.00 (0.079) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
H 1210 3528-15 3.50 (0.138) 2.80 (0.110) 1.50 (0.059) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
P, R CASE K 1206 3216-10 3.20 (0.126) 1.60 (0.063) 1.00 (0.039) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
1.00 ±0.10
Capacitance Value in pF P 0805 2012-15 2.05 (0.081) 1.35 (0.053) 1.50 (0.059) 0.50 (0.020) 0.85 (0.033)
106 = 10µF
(0.039±0.004)
1.00 ±0.10
R 0805 2012-12 2.05 (0.081) 1.30 (0.051) 1.20 (0.047) 0.50 (0.020) 0.85 (0.033)
Polarity (0.039±0.004)
Band 106 S 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
(Anode+)
J Rated Voltage Code
T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
J = 6.3V W 2312 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
W1 dimension applies to the termination width for A dimensional area only.
HOW TO ORDER
TAJ C 106 M 035 R NJ –
Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging Specification Additional characters may be
See table pF code: 1st two digits K = ±10% 002 = 2.5Vdc R = Pure Tin 7" Reel Suffix added for special requirements
above represent significant M = ±20% 004 = 4Vdc S = Pure Tin 13" Reel NJ = Standard V = Dry pack Option
figures 3rd digit 006 = 6.3Vdc A = Gold Plating 7" Reel Suffix (selected ratings only)
represents multiplier 010 = 10Vdc B = Gold Plating 13" Reel
(number of zeros 016 = 16Vdc H = Tin Lead 7" Reel
to follow) 020 = 20Vdc K = Tin Lead 13" Reel
025 = 25Vdc H, K = Non RoHS
035 = 35Vdc A, B, H, K = Please Contact
050 = 50Vdc Manufacturer
TECHNICAL SPECIFICATIONS
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.10 μF to 2200 μF
Capacitance Tolerance: ±10%; ±20%
Rated Voltage (VR) ≤ +85°C: 2.5 4 6.3 10 16 20 25 35 50
Category Voltage (VC) ≤ +125°C: 1.7 2.7 4 7 10 13 17 23 33
Surge Voltage (VS) ≤ +85°C: 3.3 5.2 8 13 20 26 32 46 65
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level
Qualification: CECC 30801 - 005 issue 2 EIA 535BAAC for standard case sizes
Termination Finished: Sn Plating (standard), Gold and SnPb Plating upon request
For AEC-Q200 availability, please contact KYOCERA AVX
020322

TAJ Series
STANDARD TANTALUMS CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
Capacitance Rated voltage DC (VR) to 85°C
μF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
0.10 104 A A
0.15 154 A A/B
0.22 224 A A/B
0.33 334 A A/B
0.47 474 A A/B A/B/C
0.68 684 A A/B A/B/C
1.0 105 A A A A/B A/B/C
1.5 155 A A A A/B A/B/C B/C/D
2.2 225 A A A/B A/B A/B A/B/C B/C/D
3.3 335 A A A/B A/B A/B/C B/C C/D
4.7 475 A A/B A/B A/B/C A/B/C B/C/D C/D
6.8 685 A/B A/B A/B/C A/B/C B/C C/D C/D
10 106 A A/B A/B/C A/B/C B/C B/C/D C/D/E D/E/V
15 156 A A/B A/B/C A/B/C B/C/D C/D C/D D/E/V
22 226 A A/B/C A/B/C A(M)/B/C/D B/C/D C/D D/E V
33 336 A A/B A/B/C A/B/C/D B/C/D C/D C/D/E D/E/V
47 476 A A/B A/B/C/D B/C/D C/D C/D/E D/E D/E/V
68 686 A A/B B/C/D B/C/D C/D C(M)/D/E D/E/V V
100 107 A/B A/B/C B/C/D B/C/D/E C/D/E D/E/V E/V
150 157 B B/C B(M)/C/D C/D/E D/E/V E/V V(M)
220 227 B/D B/C/D C/D/E C/D/E D(M)/E/V
330 337 D C/D C/D/E D/E/V E(M)
470 477 C/D C/D/E D/E/V E/U/V
680 687 C/D/E D/E D/E/V E(M)/V(M)
1000 108 D(M)/E D/E/V E(M)/V(M)
1500 158 D/E/V(M) E/V(M)
2200 228 V(M)
LOW PROFILE TANTALUMS CAPACITANCE AND RATED VOLTAGE RANGE

Capacitance Rated voltage DC (VR) to 85°C
0.10 104 R/S R/S S
0.15 154 R/S R R/S S
0.22 224 R/S R R/S P/R/S
0.33 334 R/S R R/S P/R(M)/S/T
0.47 474 R/S R/S R/S/T S/T
0.68 684 R/S R/S/T R/S P/S/T
1.0 105 R/S R/S/T R/S/T P/R/S P/S/T W
1.5 155 R/S R/S R/S P/R/S/T P/S/T T W
2.2 225 R/S R/S R/S R/S/T P/R/S/T T T W
3.3 335 R/S R/S K/R/S/T R/S/T T T/W W Y
4.7 475 R R/S R/S/T R/S/T K/P/S/T T T/W W X/Y
6.8 685 R R/S/T R/S/T P/R/S/T S/T T W Y Y
10 106 R/S R/S/T P/R/S/T K/P/R(M)/S/T T/W W W X/Y
15 156 R R/S/T K/P/R/S/T S/T/W T(M)/W W Y Y
22 226 P/R K/P/R/S/T K/P(M)/S/T/W T/W W W/Y F/Y Y
33 336 K/P/S K/P(M)/S/T/W T/W W W/Y X/Y F/Y
47 476 P(M)/S T/W T/W H/W/Y W/X/Y X/Y Y
68 686 T T/W W W/Y F/X/Y Y
100 107 T/W T(M)/W W/Y W/X/Y F(M)/Y
150 157 TM/W W/Y W/X/Y F/XM/Y Y (M)
220 227 W/Y W/X/Y F/X/Y Y

330 337 W(M)/Y F/X/Y Y
470 477 F/Y Y Y
680 687 Y Y(M)
1000 108 Y(M)
Released ratings (M tolerance only)
Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards.
032720

TAJ Series
RATINGS & PART NUMBER REFERENCE
ESR
Rated Rated Category Category DCL DF 100kHz RMS Current (mA)
Case Capacitance Max. @
Part Number Voltage Temperature Voltage Temperature Max. Max. MSL
Size (μF) 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(Ω)
2.5 Volt @ 85°C
TAJR475*002#NJ R 4.7 2.5 85 1.7 125 0.5 6 20 52 47 21 1
TAJR685*002#NJ R 6.8 2.5 85 1.7 125 0.5 6 20 52 47 21 1
TAJR106*002#NJ R 10 2.5 85 1.7 125 0.5 8 4.5 111 99 44 1
TAJS106*002#NJ S 10 2.5 85 1.7 125 0.5 6 8 90 81 36 1
TAJR156*002#NJ R 15 2.5 85 1.7 125 0.5 8 4.1 116 104 46 1
TAJP226*002#NJ P 22 2.5 85 1.7 125 0.5 8 3.5 131 118 52 1
TAJR226*002#NJ R 22 2.5 85 1.7 125 0.5 8 3.8 120 108 48 1
TAJA336*002#NJ A 33 2.5 85 1.7 125 0.8 8 1.7 210 189 84 1
TAJK336*002#NJ K 33 2.5 85 1.7 125 0.8 8 1.7 196 176 78 1
TAJP336*002#NJ P 33 2.5 85 1.7 125 0.7 8 3.5 131 118 52 1
TAJS336*002#NJ S 33 2.5 85 1.7 125 0.7 8 1.5 208 187 83 1
TAJA476*002#NJ A 47 2.5 85 1.7 125 0.9 6 3 158 142 63 1
TAJP476M002#NJ P 47 2.5 85 1.7 125 1.2 12 3.2 137 123 55 1
TAJS476*002#NJ S 47 2.5 85 1.7 125 1.2 8 1.6 202 181 81 1
TAJA686*002#NJ A 68 2.5 85 1.7 125 1.4 8 1.5 224 201 89 1
TAJT686*002#NJ T 68 2.5 85 1.7 125 1.4 8 1.5 231 208 92 1
TAJA107*002#NJ A 100 2.5 85 1.7 125 2.5 30 1.4 231 208 93 1
TAJB107*002#NJ B 100 2.5 85 1.7 125 2.5 8 1.4 246 222 99 1
TAJT107*002#NJ T 100 2.5 85 1.7 125 2.5 15 1.3 248 223 99 1
TAJW107*002#NJ W 100 2.5 85 1.7 125 2.5 8 0.4 474 427 190 1
TAJB157*002#NJ B 150 2.5 85 1.7 125 3 10 1.6 230 207 92 1
TAJT157M002#NJ T 150 2.5 85 1.7 125 3.8 18 1.2 258 232 103 1
TAJW157*002#NJ W 150 2.5 85 1.7 125 3.8 8 0.3 548 493 219 1
TAJB227*002#NJ B 220 2.5 85 1.7 125 4.4 16 1.6 230 207 92 1
TAJD227*002#NJ D 220 2.5 85 1.7 125 5.5 8 0.3 707 636 283 11)
TAJW227*002#NJ W 220 2.5 85 1.7 125 5.5 8 0.3 548 493 219 1
TAJY227*002#NJ Y 220 2.5 85 1.7 125 5.5 8 0.3 645 581 258 11)
TAJD337*002#NJ D 330 2.5 85 1.7 125 8.2 8 0.3 707 636 283 11)
TAJW337M002#NJ W 330 2.5 85 1.7 125 8.2 12 0.3 548 493 219 1
TAJY337*002#NJ Y 330 2.5 85 1.7 125 8.2 8 0.3 645 581 258 11)
TAJC477*002#NJ C 470 2.5 85 1.7 125 9.4 12 0.2 742 667 297 1
TAJD477*002#NJ D 470 2.5 85 1.7 125 11.6 8 0.2 866 779 346 11)
TAJF477*002#NJ F 470 2.5 85 1.7 125 11.8 12 0.3 577 520 231 1
TAJY477*002#NJ Y 470 2.5 85 1.7 125 11 12 0.2 791 712 316 11)
TAJC687*002#NJ C 680 2.5 85 1.7 125 17 18 0.2 742 667 297 1
TAJD687*002#NJ D 680 2.5 85 1.7 125 17 16 0.2 866 779 346 11)
TAJE687*002#NJ E 680 2.5 85 1.7 125 17 10 0.2 908 817 363 11)
TAJY687*002#NJ Y 680 2.5 85 1.7 125 17 12 0.2 791 712 316 11)
TAJD108M002#NJ D 1000 2.5 85 1.7 125 25 20 0.2 866 779 346 11)
TAJE108*002#NJ E 1000 2.5 85 1.7 125 25 14 0.4 642 578 257 11)
TAJY108M002#NJ Y 1000 2.5 85 1.7 125 25 30 0.2 791 712 316 11)
TAJD158*002#NJ D 1500 2.5 85 1.7 125 37.5 60 0.2 866 779 346 11)
TAJE158*002#NJ E 1500 2.5 85 1.7 125 37 20 0.2 908 817 363 11)
TAJV158M002#NJ V 1500 2.5 85 1.7 125 30 20 0.2 1118 1006 447 11)
TAJV228M002#NJ V 2200 2.5 85 1.7 125 55 50 0.2 1118 1006 447 11)
4 Volt @ 85°C
TAJR225*004#NJ R 2.2 4 85 2.7 125 0.5 6 25 47 42 19 1
TAJS225*004#NJ S 2.2 4 85 2.7 125 0.5 6 25 51 46 20 1
TAJR335*004#NJ R 3.3 4 85 2.7 125 0.5 6 20 52 47 21 1
TAJS335*004#NJ S 3.3 4 85 2.7 125 0.5 6 18 60 54 24 1
TAJR475*004#NJ R 4.7 4 85 2.7 125 0.5 6 12 68 61 27 1
TAJS475*004#NJ S 4.7 4 85 2.7 125 0.5 6 10 81 73 32 1
TAJR685*004#NJ R 6.8 4 85 2.7 125 0.5 6 5.2 103 93 41 1
TAJS685*004#NJ S 6.8 4 85 2.7 125 0.5 6 8 90 81 36 1
TAJT685*004#NJ T 6.8 4 85 2.7 125 0.5 6 6 115 104 46 1
TAJA106*004#NJ A 10 4 85 2.7 125 0.5 6 6 112 101 45 1
TAJR106*004#NJ R 10 4 85 2.7 125 0.5 6 7 89 80 35 1
TAJS106*004#NJ S 10 4 85 2.7 125 0.5 6 6 104 94 42 1
TAJT106*004#NJ T 10 4 85 2.7 125 0.5 6 5 126 114 51 1
TAJA156*004#NJ A 15 4 85 2.7 125 0.6 6 4 137 123 55 1
TAJR156*004#NJ R 15 4 85 2.7 125 0.6 8 4 117 106 47 1
TAJS156*004#NJ S 15 4 85 2.7 125 0.6 8 4 127 115 51 1
TAJT156*004#NJ T 15 4 85 2.7 125 0.6 6 2 200 180 80 1
TAJA226*004#NJ A 22 4 85 2.7 125 0.9 6 3.5 146 132 59 1
TAJK226*004#NJ K 22 4 85 2.7 125 0.9 8 1.8 190 171 76 1
TAJP226*004#NJ P 22 4 85 2.7 125 0.9 8 4 122 110 49 1
TAJR226*004#NJ R 22 4 85 2.7 125 0.9 8 3.8 120 108 48 1
TAJS226*004#NJ S 22 4 85 2.7 125 0.9 8 3.5 136 123 55 1
041422

TAJ Series
ESR
Size (μF) 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(Ω)
TAJT226*004#NJ T 22 4 85 2.7 125 0.9 6 1.9 205 185 82 1
TAJA336*004#NJ A 33 4 85 2.7 125 1.3 6 3 158 142 63 1
TAJB336*004#NJ B 33 4 85 2.7 125 1.3 6 2.8 174 157 70 1
TAJK336*004#NJ K 33 4 85 2.7 125 1.3 10 1.7 196 176 78 1
TAJP336M004#NJ P 33 4 85 2.7 125 1.3 8 2.8 146 132 59 1
TAJS336*004#NJ S 33 4 85 2.7 125 1.3 8 1.7 196 176 78 1
TAJT336*004#NJ T 33 4 85 2.7 125 1.3 6 1.7 217 195 87 1
TAJW336*004#NJ W 33 4 85 2.7 125 1.3 6 0.6 387 349 155 1
TAJA476*004#NJ A 47 4 85 2.7 125 1.9 8 2.6 170 153 68 1
TAJB476*004#NJ B 47 4 85 2.7 125 1.9 6 2.4 188 169 75 1
TAJT476*004#NJ T 47 4 85 2.7 125 1.9 10 1.6 224 201 89 1
TAJW476*004#NJ W 47 4 85 2.7 125 1.9 6 0.5 424 382 170 1
TAJA686*004#NJ A 68 4 85 2.7 125 2.7 10 1.5 224 201 89 1
TAJB686*004#NJ B 68 4 85 2.7 125 2.7 6 1.8 217 196 87 1
TAJT686*004#NJ T 68 4 85 2.7 125 2.7 15 1.5 231 208 92 1
TAJW686*004#NJ W 68 4 85 2.7 125 2.7 6 0.4 474 427 190 1
TAJA107*004#NJ A 100 4 85 2.7 125 4 30 1.4 231 208 93 1
TAJB107*004#NJ B 100 4 85 2.7 125 4 8 0.9 307 277 123 1
TAJC107*004#NJ C 100 4 85 2.7 125 4 6 1.3 291 262 116 1
TAJT107M004#NJ T 100 4 85 2.7 125 4 14 1.4 239 215 96 1
TAJW107*004#NJ W 100 4 85 2.7 125 4 6 0.4 474 427 190 1
TAJB157*004#NJ B 150 4 85 2.7 125 6 10 1.5 238 214 95 1
TAJC157*004#NJ C 150 4 85 2.7 125 6 6 0.3 606 545 242 1
TAJW157*004#NJ W 150 4 85 2.7 125 6 6 0.5 424 382 170 1
TAJY157*004#NJ Y 150 4 85 2.7 125 6 6 0.4 559 503 224 11)
TAJB227*004#NJ B 220 4 85 2.7 125 8.8 12 1.1 278 250 111 1
TAJC227*004#NJ C 220 4 85 2.7 125 8.8 8 1.2 303 272 121 1
TAJD227*004#NJ D 220 4 85 2.7 125 8.8 8 0.9 408 367 163 11)
TAJW227*004#NJ W 220 4 85 2.7 125 8.8 8 0.3 548 493 219 1
TAJX227*004#NJ X 220 4 85 2.7 125 8.8 8 0.3 577 520 231 11)
TAJY227*004#NJ Y 220 4 85 2.7 125 8.8 8 0.3 645 581 258 11)
TAJC337*004#NJ C 330 4 85 2.7 125 13.2 8 0.3 606 545 242 1
TAJD337*004#NJ D 330 4 85 2.7 125 13.2 8 0.9 408 367 163 11)
TAJF337*004#NJ F 330 4 85 2.7 125 13.2 10 0.3 577 520 231 1
TAJX337*004#NJ X 330 4 85 2.7 125 13.2 8 0.3 577 520 231 11)
TAJY337*004#NJ Y 330 4 85 2.7 125 13.2 12 0.4 559 503 224 11)
TAJC477*004#NJ C 470 4 85 2.7 125 18.8 14 0.3 606 545 242 1
TAJD477*004#NJ D 470 4 85 2.7 125 18.8 12 0.9 408 367 163 11)
TAJE477*004#NJ E 470 4 85 2.7 125 18.8 10 0.5 574 517 230 11)
TAJY477*004#NJ Y 470 4 85 2.7 125 18.8 14 0.4 559 503 224 11)
TAJD687*004#NJ D 680 4 85 2.7 125 27.2 14 0.5 548 493 219 11)
TAJE687*004#NJ E 680 4 85 2.7 125 27.2 10 0.9 428 385 171 11)
TAJY687M004#NJ Y 680 4 85 2.7 125 27.2 25 0.2 791 712 316 11)
TAJD108*004#NJ D 1000 4 85 2.7 125 40 60 0.2 866 779 346 11)
TAJE108*004#NJ E 1000 4 85 2.7 125 40 14 0.4 642 578 257 11)
TAJV108*004#NJ V 1000 4 85 2.7 125 40 16 0.2 1118 1006 447 11)
TAJE158*004#NJ E 1500 4 85 2.7 125 60 30 0.2 908 817 363 11)
TAJV158M004#NJ V 1500 4 85 2.7 125 60 30 0.2 1118 1006 447 11)
6.3 Volt @ 85°C
TAJR155*006#NJ R 1.5 6.3 85 4 125 0.5 6 25 47 42 19 1
TAJS155*006#NJ S 1.5 6.3 85 4 125 0.5 6 25 51 46 20 1
TAJA225*006#NJ A 2.2 6.3 85 4 125 0.5 6 9 91 82 37 1
TAJR225*006#NJ R 2.2 6.3 85 4 125 0.5 6 20 52 47 21 1
TAJS225*006#NJ S 2.2 6.3 85 4 125 0.5 6 18 60 54 24 1
TAJA335*006#NJ A 3.3 6.3 85 4 125 0.5 6 7 104 93 41 1
TAJR335*006#NJ R 3.3 6.3 85 4 125 0.5 6 12 68 61 27 1
TAJS335*006#NJ S 3.3 6.3 85 4 125 0.5 6 9 85 76 34 1
TAJA475*006#NJ A 4.7 6.3 85 4 125 0.5 6 6 112 101 45 1
TAJR475*006#NJ R 4.7 6.3 85 4 125 0.5 6 7 89 80 35 1
TAJS475*006#NJ S 4.7 6.3 85 4 125 0.5 6 7.5 93 84 37 1
TAJT475*006#NJ T 4.7 6.3 85 4 125 0.5 6 6 115 104 46 1
TAJA685*006#NJ A 6.8 6.3 85 4 125 0.5 6 5 122 110 49 1
TAJB685*006#NJ B 6.8 6.3 85 4 125 0.6 6 5 130 117 52 1
TAJR685*006#NJ R 6.8 6.3 85 4 125 0.5 8 7 89 80 35 1
TAJS685*006#NJ S 6.8 6.3 85 4 125 0.5 6 2.6 158 142 63 1
TAJT685*006#NJ T 6.8 6.3 85 4 125 0.5 6 5 126 114 51 1
TAJA106*006#NJ A 10 6.3 85 4 125 0.6 6 4 137 123 55 1
TAJB106*006#NJ B 10 6.3 85 4 125 0.6 6 3 168 151 67 1
TAJP106*006#NJ P 10 6.3 85 4 125 0.6 8 6 100 90 40 1
TAJR106*006#NJ R 10 6.3 85 4 125 0.6 8 6 96 86 38 1
041422

TAJ Series
ESR
Size (μF) 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(Ω)
TAJS106*006#NJ S 10 6.3 85 4 125 0.6 8 4 127 115 51 1
TAJT106*006#NJ T 10 6.3 85 4 125 0.6 6 4 141 127 57 1
TAJA156*006#NJ A 15 6.3 85 4 125 0.9 6 3.5 146 132 59 1
TAJB156*006#NJ B 15 6.3 85 4 125 0.9 6 2 206 186 82 1
TAJK156*006#NJ K 15 6.3 85 4 125 0.9 6 2 180 162 72 1
TAJP156*006#NJ P 15 6.3 85 4 125 0.9 8 3.5 131 118 52 1
TAJR156*006#NJ R 15 6.3 85 4 125 0.9 8 4.1 116 104 46 1
TAJS156*006#NJ S 15 6.3 85 4 125 0.9 8 3.5 136 123 55 1
TAJT156*006#NJ T 15 6.3 85 4 125 0.9 6 3.5 151 136 60 1
TAJA226*006#NJ A 22 6.3 85 4 125 1.4 6 3 158 142 63 1
TAJB226*006#NJ B 22 6.3 85 4 125 1.4 6 2.5 184 166 74 1
TAJC226*006#NJ C 22 6.3 85 4 125 1.4 6 2 235 211 94 1
TAJK226*006#NJ K 22 6.3 85 4 125 1.3 10 1.8 190 171 76 1
TAJP226M006#NJ P 22 6.3 85 4 125 1.3 8 3.3 135 121 54 1
TAJS226*006#NJ S 22 6.3 85 4 125 1.3 10 1.8 190 171 76 1
TAJT226*006#NJ T 22 6.3 85 4 125 1.4 8 2.5 179 161 72 1
TAJW226*006#NJ W 22 6.3 85 4 125 1.3 6 0.6 387 349 155 1
TAJA336*006#NJ A 33 6.3 85 4 125 2.1 8 2.2 185 166 74 1
TAJB336*006#NJ B 33 6.3 85 4 125 2.1 6 2.2 197 177 79 1
TAJC336*006#NJ C 33 6.3 85 4 125 2.1 6 1.8 247 222 99 1
TAJT336*006#NJ T 33 6.3 85 4 125 2.1 10 2.5 179 161 72 1
TAJW336*006#NJ W 33 6.3 85 4 125 2 6 0.5 424 382 170 1
TAJA476*006#NJ A 47 6.3 85 4 125 2.8 10 1.6 217 195 87 1
TAJB476*006#NJ B 47 6.3 85 4 125 3 6 2 206 186 82 1
TAJC476*006#NJ C 47 6.3 85 4 125 3 6 1.6 262 236 105 1
TAJD476*006#NJ D 47 6.3 85 4 125 3 6 1.1 369 332 148 11)
TAJT476*006#NJ T 47 6.3 85 4 125 2.8 10 1.6 224 201 89 1
TAJW476*006#NJ W 47 6.3 85 4 125 2.8 6 0.5 424 382 170 1
TAJB686*006#NJ B 68 6.3 85 4 125 4 8 0.9 307 277 123 1
TAJC686*006#NJ C 68 6.3 85 4 125 4.3 6 1.5 271 244 108 1
TAJD686*006#NJ D 68 6.3 85 4 125 4.3 6 0.9 408 367 163 11)
TAJW686*006#NJ W 68 6.3 85 4 125 4.3 6 1.5 245 220 98 1
TAJB107*006#NJ B 100 6.3 85 4 125 6.3 10 1.7 224 201 89 1
TAJC107*006#NJ C 100 6.3 85 4 125 6.3 6 0.9 350 315 140 1
TAJD107*006#NJ D 100 6.3 85 4 125 6.3 6 0.9 408 367 163 11)
TAJW107*006#NJ W 100 6.3 85 4 125 6.3 6 0.9 316 285 126 1
TAJY107*006#NJ Y 100 6.3 85 4 125 6.3 6 0.7 423 380 169 11)
TAJB157M006#NJ B 150 6.3 85 4 125 9.5 10 1.2 266 240 106 1
TAJC157*006#NJ C 150 6.3 85 4 125 9.5 6 1.3 291 262 116 1
TAJD157*006#NJ D 150 6.3 85 4 125 9.5 6 0.9 408 367 163 11)
TAJW157*006#NJ W 150 6.3 85 4 125 9 8 0.3 548 493 219 1
TAJX157*006#NJ X 150 6.3 85 4 125 9 6 0.4 500 450 200 11)
TAJY157*006#NJ Y 150 6.3 85 4 125 9.5 6 0.4 559 503 224 11)
TAJC227*006#NJ C 220 6.3 85 4 125 13.9 8 1.2 303 272 121 1
TAJD227*006#NJ D 220 6.3 85 4 125 13.9 8 0.4 612 551 245 11)
TAJE227*006#NJ E 220 6.3 85 4 125 13.9 8 0.4 642 578 257 11)
TAJF227*006#NJ F 220 6.3 85 4 125 13.2 10 0.3 577 520 231 1
TAJX227*006#NJ X 220 6.3 85 4 125 13.2 8 0.3 577 520 231 11)
TAJY227*006#NJ Y 220 6.3 85 4 125 13.9 8 0.7 423 380 169 11)
TAJC337*006#NJ C 330 6.3 85 4 125 19.8 12 0.5 469 422 188 1
TAJD337*006#NJ D 330 6.3 85 4 125 20.8 8 0.4 612 551 245 11)
TAJE337*006#NJ E 330 6.3 85 4 125 20.8 8 0.4 642 578 257 11)
TAJY337*006#NJ Y 330 6.3 85 4 125 20.8 12 0.4 559 503 224 11)
TAJD477*006#NJ D 470 6.3 85 4 125 28 12 0.4 612 551 245 11)
TAJE477*006#NJ E 470 6.3 85 4 125 28 10 0.4 642 578 257 11)
TAJV477*006#NJ V 470 6.3 85 4 125 28 10 0.4 791 712 316 11)
TAJY477*006#NJ Y 470 6.3 85 4 125 28.2 20 0.2 791 712 316 11)
TAJD687*006#NJV D 680 6.3 85 4 125 40.8 20 0.5 548 493 219 3
TAJE687*006#NJ E 680 6.3 85 4 125 42.8 10 0.5 574 517 230 11)
TAJV687*006#NJ V 680 6.3 85 4 125 42.8 10 0.5 707 636 283 11)
TAJE108M006#NJ E 1000 6.3 85 4 125 60 20 0.2 908 817 363 11)
TAJV108M006#NJ V 1000 6.3 85 4 125 60 16 0.2 1118 1006 447 11)
10 Volt @ 85°C
TAJR105*010#NJ R 1 10 85 7 125 0.5 4 25 47 42 19 1
TAJS105*010#NJ S 1 10 85 7 125 0.5 4 25 51 46 20 1
TAJA155*010#NJ A 1.5 10 85 7 125 0.5 6 10 87 78 35 1
TAJR155*010#NJ R 1.5 10 85 7 125 0.5 6 20 52 47 21 1
TAJS155*010#NJ S 1.5 10 85 7 125 0.5 6 20 57 51 23 1
TAJA225*010#NJ A 2.2 10 85 7 125 0.5 6 7 104 93 41 1
TAJR225*010#NJ R 2.2 10 85 7 125 0.5 6 15 61 54 24 1
042122

TAJ Series
ESR
Size (μF) 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(Ω)
TAJS225*010#NJ S 2.2 10 85 7 125 0.5 6 12 74 66 29 1
TAJA335*010#NJ A 3.3 10 85 7 125 0.5 6 5.5 117 105 47 1
TAJK335*010#NJ K 3.3 10 85 7 125 0.5 6 5.5 109 98 43 1
TAJR335*010#NJ R 3.3 10 85 7 125 0.5 6 8 83 75 33 1
TAJS335*010#NJ S 3.3 10 85 7 125 0.5 6 8 90 81 36 1
TAJT335*010#NJ T 3.3 10 85 7 125 0.5 6 6 115 104 46 1
TAJA475*010#NJ A 4.7 10 85 7 125 0.5 6 5 122 110 49 1
TAJB475*010#NJ B 4.7 10 85 7 125 0.5 6 4 146 131 58 1
TAJR475*010#NJ R 4.7 10 85 7 125 0.5 6 9 78 70 31 1
TAJS475*010#NJ S 4.7 10 85 7 125 0.5 6 5 114 103 46 1
TAJT475*010#NJ T 4.7 10 85 7 125 0.5 6 5 126 114 51 1
TAJA685*010#NJ A 6.8 10 85 7 125 0.7 6 4 137 123 55 1
TAJB685*010#NJ B 6.8 10 85 7 125 0.7 6 3 168 151 67 1
TAJP685*010#NJ P 6.8 10 85 7 125 0.6 6 5 110 99 44 1
TAJR685*010#NJ R 6.8 10 85 7 125 0.7 6 5.2 103 93 41 1
TAJS685*010#NJ S 6.8 10 85 7 125 0.7 6 4 127 115 51 1
TAJT685*010#NJ T 6.8 10 85 7 125 0.7 6 4 141 127 57 1
TAJA106*010#NJ A 10 10 85 7 125 1 6 3 158 142 63 1
TAJB106*010#NJ B 10 10 85 7 125 1 6 2.1 201 181 80 1
TAJC106*010#NJ C 10 10 85 7 125 1 6 2.5 210 189 84 1
TAJK106*010#NJ K 10 10 85 7 125 1 6 2.2 172 155 69 1
TAJP106*010#NJ P 10 10 85 7 125 1 8 6 100 90 40 1
TAJR106M010#NJ R 10 10 85 7 125 1 20 6 96 86 38 1
TAJS106*010#NJ S 10 10 85 7 125 1 8 3 147 132 59 1
TAJT106*010#NJ T 10 10 85 7 125 1 6 3 163 147 65 1
TAJA156*010#NJ A 15 10 85 7 125 1.5 6 3.2 153 138 61 1
TAJB156*010#NJ B 15 10 85 7 125 1.5 6 2.8 174 157 70 1
TAJC156*010#NJ C 15 10 85 7 125 1.5 6 2 235 211 94 1
TAJS156*010#NJ S 15 10 85 7 125 1.5 6 2 180 162 72 1
TAJT156*010#NJ T 15 10 85 7 125 1.5 8 2.8 169 152 68 1
TAJW156*010#NJ W 15 10 85 7 125 1.5 6 0.7 359 323 143 1
TAJA226*010#NJ A 22 10 85 7 125 2.2 8 3 158 142 63 1
TAJB226*010#NJ B 22 10 85 7 125 2.2 6 2.4 188 169 75 1
TAJC226*010#NJ C 22 10 85 7 125 2.2 6 1.8 247 222 99 1
TAJT226*010#NJ T 22 10 85 7 125 2.2 8 2.2 191 172 76 1
TAJW226*010#NJ W 22 10 85 7 125 2.2 6 0.6 387 349 155 1
TAJA336*010#NJ A 33 10 85 7 125 3.3 8 1.7 210 189 84 1
TAJB336*010#NJ B 33 10 85 7 125 3.3 6 1.8 217 196 87 1
TAJC336*010#NJ C 33 10 85 7 125 3.3 6 1.6 262 236 105 1
TAJD336*010#NJ D 33 10 85 7 125 3.3 6 1.1 369 332 148 11)
TAJW336*010#NJ W 33 10 85 7 125 3.3 6 1.6 237 213 95 1
TAJB476*010#NJ B 47 10 85 7 125 4.7 8 1 292 262 117 1
TAJC476*010#NJ C 47 10 85 7 125 4.7 6 1.2 303 272 121 1
TAJD476*010#NJ D 47 10 85 7 125 4.7 6 0.4 612 551 245 11)
TAJH476*006#NJ H 47 10 85 7 125 4.7 8 1.0 283 255 113 1
TAJW476*010#NJ W 47 10 85 7 125 4.7 6 1.4 254 228 101 1
TAJY476*010#NJ Y 47 10 85 7 125 4.7 6 0.5 500 450 200 11)
TAJB686*010#NJ B 68 10 85 7 125 6.8 8 1.4 246 222 99 1
TAJC686*010#NJ C 68 10 85 7 125 6.8 6 1.3 291 262 116 1
TAJD686*010#NJ D 68 10 85 7 125 6.8 6 0.9 408 367 163 11)
TAJW686*010#NJ W 68 10 85 7 125 6.8 6 1.2 274 246 110 1
TAJY686*010#NJ Y 68 10 85 7 125 6.8 6 0.9 373 335 149 11)
TAJB107*010#NJ B 100 10 85 7 125 10 8 1.4 246 222 99 1
TAJC107*010#NJ C 100 10 85 7 125 10 8 1.2 303 272 121 1
TAJD107*010#NJ D 100 10 85 7 125 10 6 0.9 408 367 163 11)
TAJE107*010#NJ E 100 10 85 7 125 10 6 0.9 428 385 171 11)
TAJW107*010#NJ W 100 10 85 7 125 10 6 0.4 474 427 190 1
TAJX107*010#NJ X 100 10 85 7 125 10 8 0.9 333 300 133 11)
TAJY107*010#NJ Y 100 10 85 7 125 10 6 0.9 373 335 149 11)
TAJC157*010#NJ C 150 10 85 7 125 15 8 0.9 350 315 140 1
TAJD157*010#NJ D 150 10 85 7 125 15 8 0.9 408 367 163 11)
TAJE157*010#NJ E 150 10 85 7 125 15 8 0.9 428 385 171 11)
TAJF157*010#NJ F 150 10 85 7 125 15 10 0.3 577 520 231 1
TAJX157M010#NJ X 150 10 85 7 125 15 6 0.3 577 520 231 11)
TAJY157*010#NJ Y 150 10 85 7 125 15 6 1.2 323 290 129 11)
TAJC227*010#NJ C 220 10 85 7 125 22 16 0.5 469 422 188 1
TAJD227*010#NJ D 220 10 85 7 125 22 8 0.5 548 493 219 11)
TAJE227*010#NJ E 220 10 85 7 125 22 8 0.5 574 517 230 11)
TAJY227*010#NJ Y 220 10 85 7 125 22 10 0.5 500 450 200 11)
TAJD337*010#NJ D 330 10 85 7 125 33 8 0.9 408 367 163 11)
041422

TAJ Series
ESR
Size (μF) 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(Ω)
TAJE337*010#NJ E 330 10 85 7 125 33 8 0.9 428 385 171 11)
TAJV337*010#NJ V 330 10 85 7 125 33 10 0.9 527 474 211 11)
TAJE477*010#NJ E 470 10 85 7 125 47 10 0.5 574 517 230 11)
TAJU477*010RNJ U 470 10 85 7 125 47 12 0.5 574 517 230 11)
TAJV477*010#NJ V 470 10 85 7 125 47 10 0.5 707 636 283 11)
TAJE687M010#NJV E 680 10 85 7 125 68 18 0.4 642 578 257 3
TAJV687M010#NJV V 680 10 85 7 125 68 18 0.4 791 712 316 3
16 Volt @ 85°C
TAJR684*016#NJ R 0.68 16 85 10 125 0.5 4 25 47 42 19 1
TAJS684*016#NJ S 0.68 16 85 10 125 0.5 4 25 51 46 20 1
TAJA105*016#NJ A 1 16 85 10 125 0.5 4 11 83 74 33 1
TAJR105*016#NJ R 1 16 85 10 125 0.5 4 20 52 47 21 1
TAJS105*016#NJ S 1 16 85 10 125 0.5 4 15 66 59 26 1
TAJT105*016#NJ T 1 16 85 10 125 0.5 4 5 126 114 51 1
TAJA155*016#NJ A 1.5 16 85 10 125 0.5 6 8 97 87 39 1
TAJR155*016#NJ R 1.5 16 85 10 125 0.5 6 10 74 67 30 1
TAJS155*016#NJ S 1.5 16 85 10 125 0.5 6 12 74 66 29 1
TAJA225*016#NJ A 2.2 16 85 10 125 0.5 6 6.5 107 97 43 1
TAJB225*016#NJ B 2.2 16 85 10 125 0.5 6 2.3 192 173 77 1
TAJR225*016#NJ R 2.2 16 85 10 125 0.5 6 6.5 92 83 37 1
TAJS225*016#NJ S 2.2 16 85 10 125 0.5 6 6 104 94 42 1
TAJT225*016#NJ T 2.2 16 85 10 125 0.5 6 6.5 111 100 44 1
TAJA335*016#NJ A 3.3 16 85 10 125 0.5 6 5 122 110 49 1
TAJB335*016#NJ B 3.3 16 85 10 125 0.5 6 4.5 137 124 55 1
TAJR335*016#NJ R 3.3 16 85 10 125 0.5 8 5 105 94 42 1
TAJS335*016#NJ S 3.3 16 85 10 125 0.5 6 5 114 103 46 1
TAJT335*016#NJ T 3.3 16 85 10 125 0.5 6 5 126 114 51 1
TAJA475*016#NJ A 4.7 16 85 10 125 0.8 6 4 137 123 55 1
TAJB475*016#NJ B 4.7 16 85 10 125 0.8 6 3.5 156 140 62 1
TAJK475*016#NJ K 4.7 16 85 10 125 0.8 6 3.1 145 130 58 1
TAJP475*016#NJ P 4.7 16 85 10 125 0.8 8 5 110 99 44 1
TAJS475*016#NJ S 4.7 16 85 10 125 0.8 8 4 127 115 51 1
TAJT475*016#NJ T 4.7 16 85 10 125 0.8 6 3.1 161 145 64 1
TAJA685*016#NJ A 6.8 16 85 10 125 1.1 6 3.5 146 132 59 1
TAJB685*016#NJ B 6.8 16 85 10 125 1.1 6 2.5 184 166 74 1
TAJC685*016#NJ C 6.8 16 85 10 125 1.1 6 2.5 210 189 84 1
TAJS685*016#NJ S 6.8 16 85 10 125 1.1 8 2.4 165 148 66 1
TAJT685*016#NJ T 6.8 16 85 10 125 1.1 6 3.5 151 136 60 1
TAJA106*016#NJ A 10 16 85 10 125 1.6 6 3 158 142 63 1
TAJB106*016#NJ B 10 16 85 10 125 1.6 6 2.8 174 157 70 1
TAJC106*016#NJ C 10 16 85 10 125 1.6 6 2 235 211 94 1
TAJT106*016#NJ T 10 16 85 10 125 1.6 8 2.2 191 172 76 1
TAJW106*016#NJ W 10 16 85 10 125 1.6 6 2 212 191 85 1
TAJA156*016#NJ A 15 16 85 10 125 2.4 6 2 194 174 77 1
TAJB156*016#NJ B 15 16 85 10 125 2.4 6 2.5 184 166 74 1
TAJC156*016#NJ C 15 16 85 10 125 2.4 6 1.8 247 222 99 1
TAJT156M016#NJ T 15 16 85 10 125 2.4 6 2 200 180 80 1
TAJW156*016#NJ W 15 16 85 10 125 2.4 6 0.7 359 323 143 1
TAJA226M016#NJ A 22 16 85 10 125 3.5 10 2.3 181 163 72 1
TAJB226*016#NJ B 22 16 85 10 125 3.5 6 2.3 192 173 77 1
TAJC226*016#NJ C 22 16 85 10 125 3.5 6 1 332 298 133 1
TAJD226*016#NJ D 22 16 85 10 125 3.5 6 1.1 369 332 148 11)
TAJW226*016#NJ W 22 16 85 10 125 3.5 6 1.6 237 213 95 1
TAJB336*016#NJ B 33 16 85 10 125 5.3 8 2.1 201 181 80 1
TAJC336*016#NJ C 33 16 85 10 125 5.3 6 1.5 271 244 108 1
TAJD336*016#NJ D 33 16 85 10 125 5.3 6 0.9 408 367 163 11)
TAJW336*016#NJ W 33 16 85 10 125 5.3 6 1.5 245 220 98 1
TAJY336*016#NJ Y 33 16 85 10 125 5.3 6 0.9 373 335 149 11)
TAJC476*016#NJ C 47 16 85 10 125 7.5 6 0.5 469 422 188 1
TAJD476*016#NJ D 47 16 85 10 125 7.5 6 0.9 408 367 163 11)
TAJW476*016#NJ W 47 16 85 10 125 7.5 6 0.4 474 427 190 1
TAJX476*016#NJ X 47 16 85 10 125 7.5 6 0.75 365 329 146 11)
TAJY476*016#NJ Y 47 16 85 10 125 7.5 6 0.7 423 380 169 11)
TAJC686*016#NJ C 68 16 85 10 125 10.9 6 1.3 291 262 116 1
TAJD686*016#NJ D 68 16 85 10 125 10.9 6 0.9 408 367 163 11)
TAJF686*016#NJ F 68 16 85 10 125 10.9 10 0.4 500 450 200 1
TAJX686*016#NJ X 68 16 85 10 125 10.9 8 0.6 408 367 163 11)
TAJY686*016#NJ Y 68 16 85 10 125 10.9 6 0.9 373 335 149 11)
TAJC107*016#NJ C 100 16 85 10 125 16 8 1 332 298 133 1
TAJD107*016#NJ D 100 16 85 10 125 16 6 0.6 500 450 200 11)
041422

TAJ Series
ESR
Size (μF) 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(Ω)
TAJE107*016#NJ E 100 16 85 10 125 16 6 0.9 428 385 171 11)
TAJF107M016#NJ F 100 16 85 10 125 16 10 0.4 500 450 200 1
TAJY107*016#NJ Y 100 16 85 10 125 16 8 0.9 373 335 149 11)
TAJD157*016#NJ D 150 16 85 10 125 24 6 0.9 408 367 163 11)
TAJE157*016#NJ E 150 16 85 10 125 24 8 0.3 742 667 297 11)
TAJV157*016#NJ V 150 16 85 10 125 24 8 0.5 707 636 283 11)
TAJY157M016#NJ Y 150 16 85 10 125 24 15 0.3 645 581 258 11)
TAJD227M016#NJV D 220 16 85 10 125 35.2 10 0.5 548 493 219 3
TAJE227*016#NJ E 220 16 85 10 125 35.2 10 0.5 574 517 230 11)
TAJV227*016#NJ V 220 16 85 10 125 35.2 8 0.9 527 474 211 11)
TAJE337M016#NJ E 330 16 85 10 125 52.8 30 0.4 642 578 257 11)
20 Volt @ 85°C
TAJR104*020#NJ R 0.1 20 85 13 125 0.5 4 25 47 42 19 1
TAJS104*020#NJ S 0.1 20 85 13 125 0.5 4 25 51 46 20 1
TAJR154*020#NJ R 0.15 20 85 13 125 0.5 4 25 47 42 19 1
TAJS154*020#NJ S 0.15 20 85 13 125 0.5 4 25 51 46 20 1
TAJR224*020#NJ R 0.22 20 85 13 125 0.5 4 25 47 42 19 1
TAJS224*020#NJ S 0.22 20 85 13 125 0.5 4 25 51 46 20 1
TAJR334*020#NJ R 0.33 20 85 13 125 0.5 4 25 47 42 19 1
TAJS334*020#NJ S 0.33 20 85 13 125 0.5 4 25 51 46 20 1
TAJR474*020#NJ R 0.47 20 85 13 125 0.5 4 25 47 42 19 1
TAJS474*020#NJ S 0.47 20 85 13 125 0.5 4 25 51 46 20 1
TAJR684*020#NJ R 0.68 20 85 13 125 0.5 4 20 52 47 21 1
TAJS684*020#NJ S 0.68 20 85 13 125 0.5 4 25 51 46 20 1
TAJT684*020#NJ T 0.68 20 85 13 125 0.5 4 15 73 66 29 1
TAJA105*020#NJ A 1 20 85 13 125 0.5 4 9 91 82 37 1
TAJR105*020#NJ R 1 20 85 13 125 0.5 4 20 52 47 21 1
TAJS105*020#NJ S 1 20 85 13 125 0.5 4 12 74 66 29 1
TAJT105*020#NJ T 1 20 85 13 125 0.5 4 9 94 85 38 1
TAJA155*020#NJ A 1.5 20 85 13 125 0.5 6 6.5 107 97 43 1
TAJP155*020#NJ P 1.5 20 85 13 125 0.5 6 9.6 79 71 32 1
TAJR155*020#NJ R 1.5 20 85 13 125 0.5 6 9.6 76 68 30 1
TAJS155*020#NJ S 1.5 20 85 13 125 0.5 6 5.4 110 99 44 1
TAJT155*020#NJ T 1.5 20 85 13 125 0.5 6 6.5 111 100 44 1
TAJA225*020#NJ A 2.2 20 85 13 125 0.5 6 5.3 119 107 48 1
TAJB225*020#NJ B 2.2 20 85 13 125 0.5 6 3.5 156 140 62 1
TAJP225*020#NJ P 2.2 20 85 13 125 0.5 6 8.3 85 77 34 1
TAJR225*020#NJ R 2.2 20 85 13 125 0.5 6 6 96 86 38 1
TAJS225*020#NJ S 2.2 20 85 13 125 0.5 6 4.5 120 108 48 1
TAJT225*020#NJ T 2.2 20 85 13 125 0.5 6 6 115 104 46 1
TAJA335*020#NJ A 3.3 20 85 13 125 0.7 6 4.5 129 116 52 1
TAJB335*020#NJ B 3.3 20 85 13 125 0.7 6 3 168 151 67 1
TAJT335*020#NJ T 3.3 20 85 13 125 0.7 6 3 163 147 65 1
TAJA475*020#NJ A 4.7 20 85 13 125 0.9 6 4 137 123 55 1
TAJB475*020#NJ B 4.7 20 85 13 125 0.9 6 3 168 151 67 1
TAJC475*020#NJ C 4.7 20 85 13 125 0.9 6 2.8 198 178 79 1
TAJT475*020#NJ T 4.7 20 85 13 125 0.9 6 3.1 161 145 64 1
TAJA685*020#NJ A 6.8 20 85 13 125 1.4 6 2.4 177 159 71 1
TAJB685*020#NJ B 6.8 20 85 13 125 1.4 6 2.5 184 166 74 1
TAJC685*020#NJ C 6.8 20 85 13 125 1.4 6 2 235 211 94 1
TAJT685*020#NJ T 6.8 20 85 13 125 1.4 6 2.6 175 158 70 1
TAJB106*020#NJ B 10 20 85 13 125 2 6 2.1 201 181 80 1
TAJC106*020#NJ C 10 20 85 13 125 2 6 1.2 303 272 121 1
TAJW106*020#NJ W 10 20 85 13 125 2 6 1.9 218 196 87 1
TAJB156*020#NJ B 15 20 85 13 125 3 6 2 206 186 82 1
TAJC156*020#NJ C 15 20 85 13 125 3 6 1.7 254 229 102 1
TAJD156*020#NJ D 15 20 85 13 125 3 6 1.1 369 332 148 11)
TAJW156*020#NJ W 15 20 85 13 125 3 6 1.7 230 207 92 1
TAJB226*020#NJ B 22 20 85 13 125 4.4 6 1.8 217 196 87 1
TAJC226*020#NJ C 22 20 85 13 125 4.4 6 1.6 262 236 105 1
TAJD226*020#NJ D 22 20 85 13 125 4.4 6 0.9 408 367 163 11)
TAJW226*020#NJ W 22 20 85 13 125 4.4 6 1.6 237 213 95 1
TAJY226*020#NJ Y 22 20 85 13 125 4.4 6 0.9 373 335 149 11)
TAJC336*020#NJ C 33 20 85 13 125 6.6 6 1.5 271 244 108 1
TAJD336*020#NJ D 33 20 85 13 125 6.6 6 0.9 408 367 163 11)
TAJX336*020#NJ X 33 20 85 13 125 6.6 6 0.5 447 402 179 11)
TAJY336*020#NJ Y 33 20 85 13 125 6.6 6 0.6 456 411 183 11)
TAJC476*020#NJ C 47 20 85 13 125 9.4 6 0.5 469 422 188 1
TAJD476*020#NJ D 47 20 85 13 125 9.4 6 0.9 408 367 163 11)
TAJE476*020#NJ E 47 20 85 13 125 9.4 6 0.9 428 385 171 11)
041422

TAJ Series
ESR
Size (μF) 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(Ω)
TAJX476*020#NJ X 47 20 85 13 125 9.4 6 0.4 500 450 200 11)
TAJY476*020#NJ Y 47 20 85 13 125 9.4 6 0.9 373 335 149 11)
TAJC686M020#NJ C 68 20 85 13 125 13.6 8 0.5 469 422 188 1
TAJD686*020#NJ D 68 20 85 13 125 13.6 6 0.4 612 551 245 11)
TAJE686*020#NJ E 68 20 85 13 125 13.6 6 0.9 428 385 171 11)
TAJY686*020#NJ Y 68 20 85 13 125 13.6 6 0.9 373 335 149 11)
TAJD107*020#NJ D 100 20 85 13 125 20 6 0.5 548 493 219 11)
TAJE107*020#NJ E 100 20 85 13 125 20 6 0.4 642 578 257 11)
TAJV107*020#NJ V 100 20 85 13 125 20 8 0.9 527 474 211 11)
TAJE157*020#NJ E 150 20 85 13 125 30 8 0.3 742 667 297 11)
TAJV157*020#NJ V 150 20 85 13 125 30 8 0.3 913 822 365 11)
25 Volt @ 85°C
TAJR154*025#NJ R 0.15 25 85 17 125 0.5 4 24 48 43 19 1
TAJR224*025#NJ R 0.22 25 85 17 125 0.5 4 21 51 46 20 1
TAJR334*025#NJ R 0.33 25 85 17 125 0.5 4 17 57 51 23 1
TAJA474*025#NJ A 0.47 25 85 17 125 0.5 4 14 73 66 29 1
TAJR474*025#NJ R 0.47 25 85 17 125 0.5 4 15 61 54 24 1
TAJS474*025#NJ S 0.47 25 85 17 125 0.5 4 9 85 76 34 1
TAJA684*025#NJ A 0.68 25 85 17 125 0.5 4 10 87 78 35 1
TAJR684*025#NJ R 0.68 25 85 17 125 0.5 4 13 65 59 26 1
TAJS684*025#NJ S 0.68 25 85 17 125 0.5 4 8 90 81 36 1
TAJA105*025#NJ A 1 25 85 17 125 0.5 4 8 97 87 39 1
TAJP105*025#NJ P 1 25 85 17 125 0.5 4 11 74 66 30 1
TAJR105*025#NJ R 1 25 85 17 125 0.5 4 8 83 75 33 1
TAJS105*025#NJ S 1 25 85 17 125 0.5 4 8 90 81 36 1
TAJA155*025#NJ A 1.5 25 85 17 125 0.5 6 7.5 100 90 40 1
TAJB155*025#NJ B 1.5 25 85 17 125 0.5 6 5 130 117 52 1
TAJP155*025#NJ P 1.5 25 85 17 125 0.5 6 9.6 79 71 32 1
TAJS155*025#NJ S 1.5 25 85 17 125 0.5 6 5.4 110 99 44 1
TAJT155*025#NJ T 1.5 25 85 17 125 0.5 6 5 126 114 51 1
TAJA225*025#NJ A 2.2 25 85 17 125 0.6 6 7 104 93 41 1
TAJB225*025#NJ B 2.2 25 85 17 125 0.6 6 4.5 137 124 55 1
TAJT225*025#NJ T 2.2 25 85 17 125 0.6 6 4.5 133 120 53 1
TAJA335*025#NJ A 3.3 25 85 17 125 0.8 6 3.7 142 128 57 1
TAJB335*025#NJ B 3.3 25 85 17 125 0.8 6 3.5 156 140 62 1
TAJC335*025#NJ C 3.3 25 85 17 125 0.8 6 2.8 198 178 79 1
TAJT335*025#NJ T 3.3 25 85 17 125 0.8 6 3.5 151 136 60 1
TAJW335*025#NJ W 3.3 25 85 17 125 0.8 6 1.6 237 213 95 1
TAJA475*025#NJ A 4.7 25 85 17 125 1.2 6 3.1 156 140 62 1
TAJB475*025#NJ B 4.7 25 85 17 125 1.2 6 1.5 238 214 95 1
TAJC475*025#NJ C 4.7 25 85 17 125 1.2 6 2.4 214 193 86 1
TAJT475*025#NJ T 4.7 25 85 17 125 1.2 6 3.1 161 145 64 1
TAJW475*025#NJ W 4.7 25 85 17 125 1.2 6 1.2 274 246 110 1
TAJB685*025#NJ B 6.8 25 85 17 125 1.7 6 2.8 174 157 70 1
TAJC685*025#NJ C 6.8 25 85 17 125 1.7 6 2 235 211 94 1
TAJW685*025#NJ W 6.8 25 85 17 125 1.7 6 2 212 191 85 1
TAJB106*025#NJ B 10 25 85 17 125 2.5 6 2.5 184 166 74 1
TAJC106*025#NJ C 10 25 85 17 125 2.5 6 1.8 247 222 99 1
TAJD106*025#NJ D 10 25 85 17 125 2.5 6 1.2 354 318 141 11)
TAJW106*025#NJ W 10 25 85 17 125 2.5 6 1.8 224 201 89 1
TAJC156*025#NJ C 15 25 85 17 125 3.8 6 1.6 262 236 105 1
TAJD156*025#NJ D 15 25 85 17 125 3.8 6 1 387 349 155 11)
TAJY156*025#NJ Y 15 25 85 17 125 3.8 6 1 354 318 141 11)
TAJC226*025#NJ C 22 25 85 17 125 5.5 6 1.4 280 252 112 1
TAJD226*025#NJ D 22 25 85 17 125 5.5 6 0.9 408 367 163 11)
TAJF226*025#NJ F 22 25 85 17 125 5.5 6 1 316 285 126 1
TAJY226*025#NJ Y 22 25 85 17 125 5.5 6 0.8 395 356 158 11)
TAJC336*025#NJ C 33 25 85 17 125 8.3 6 0.9 350 315 140 1
TAJD336*025#NJ D 33 25 85 17 125 8.3 6 0.9 408 367 163 11)
TAJE336*025#NJ E 33 25 85 17 125 8.3 6 0.9 428 385 171 11)
TAJF336*025#NJ F 33 25 85 17 125 8.3 6 0.9 333 300 133 1
TAJY336*025#NJ Y 33 25 85 17 125 8.3 6 0.5 500 450 200 11)
TAJD476*025#NJ D 47 25 85 17 125 11.8 6 0.9 408 367 163 11)
TAJE476*025#NJ E 47 25 85 17 125 11.8 6 0.9 428 385 171 11)
TAJY476*025#NJ Y 47 25 85 17 125 11.8 6 0.9 373 335 149 11)
TAJD686*025#NJ D 68 25 85 17 125 17 6 0.9 408 367 163 11)
TAJE686*025#NJ E 68 25 85 17 125 17 6 0.9 428 385 171 11)
041422

TAJ Series
ESR
Size (μF) 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(Ω)
TAJV686*025#NJ V 68 25 85 17 125 17 6 0.9 527 474 211 11)
TAJE107*025#NJ E 100 25 85 17 125 25 10 0.3 742 667 297 11)
TAJV107*025#NJ V 100 25 85 17 125 25 8 0.4 791 712 316 11)
TAJV157M025#NJ V 150 25 85 17 125 37.5 10 0.4 791 712 316 11)
35 Volt @ 85°C
TAJA104*035#NJ A 0.1 35 85 23 125 0.5 4 24 56 50 22 1
TAJR104*035#NJ R 0.1 35 85 23 125 0.5 4 29 44 39 17 1
TAJS104*035#NJ S 0.1 35 85 23 125 0.5 4 24 52 47 21 1
TAJA154*035#NJ A 0.15 35 85 23 125 0.5 4 21 60 54 24 1
TAJR154*035#NJ R 0.15 35 85 23 125 0.5 4 24 48 43 19 1
TAJS154*035#NJ S 0.15 35 85 23 125 0.5 4 21 56 50 22 1
TAJA224*035#NJ A 0.22 35 85 23 125 0.5 4 18 65 58 26 1
TAJR224*035#NJ R 0.22 35 85 23 125 0.5 4 21 51 46 20 1
TAJS224*035#NJ S 0.22 35 85 23 125 0.5 4 18 60 54 24 1
TAJA334*035#NJ A 0.33 35 85 23 125 0.5 4 15 71 64 28 1
TAJR334*035#NJ R 0.33 35 85 23 125 0.5 4 17 57 51 23 1
TAJS334*035#NJ S 0.33 35 85 23 125 0.5 4 15 66 59 26 1
TAJA474*035#NJ A 0.47 35 85 23 125 0.5 4 12 79 71 32 1
TAJB474*035#NJ B 0.47 35 85 23 125 0.5 4 10 92 83 37 1
TAJR474*035#NJ R 0.47 35 85 23 125 0.5 4 15 61 54 24 1
TAJS474*035#NJ S 0.47 35 85 23 125 0.5 4 12 74 66 29 1
TAJT474*035#NJ T 0.47 35 85 23 125 0.5 4 10 89 80 36 1
TAJA684*035#NJ A 0.68 35 85 23 125 0.5 4 8 97 87 39 1
TAJB684*035#NJ B 0.68 35 85 23 125 0.5 4 8 103 93 41 1
TAJP684*035#NJ P 0.68 35 85 23 125 0.5 4 13 68 61 27 1
TAJS684*035#NJ S 0.68 35 85 23 125 0.5 4 8 90 81 36 1
TAJT684*035#NJ T 0.68 35 85 23 125 0.5 4 8 100 90 40 1
TAJA105*035#NJ A 1 35 85 23 125 0.5 4 7.5 100 90 40 1
TAJB105*035#NJ B 1 35 85 23 125 0.5 4 6.5 114 103 46 1
TAJP105*035#NJ P 1 35 85 23 125 0.5 4 11 74 66 30 1
TAJS105*035#NJ S 1 35 85 23 125 0.5 4 7.5 93 84 37 1
TAJT105*035#NJ T 1 35 85 23 125 0.5 4 6.5 111 100 44 1
TAJA155*035#NJ A 1.5 35 85 23 125 0.5 6 7.5 100 90 40 1
TAJB155*035#NJ B 1.5 35 85 23 125 0.5 6 5.2 128 115 51 1
TAJC155*035#NJ C 1.5 35 85 23 125 0.5 6 4.5 156 141 63 1
TAJT155*035#NJ T 1.5 35 85 23 125 0.5 6 5.2 124 112 50 1
TAJA225*035#NJ A 2.2 35 85 23 125 0.8 6 4.5 129 116 52 1
TAJB225*035#NJ B 2.2 35 85 23 125 0.8 6 4.2 142 128 57 1
TAJC225*035#NJ C 2.2 35 85 23 125 0.8 6 3.5 177 160 71 1
TAJT225*035#NJ T 2.2 35 85 23 125 0.8 6 4.2 138 124 55 1
TAJB335*035#NJ B 3.3 35 85 23 125 1.2 6 3.5 156 140 62 1
TAJC335*035#NJ C 3.3 35 85 23 125 1.2 6 2.5 210 189 84 1
TAJW335*035#NJ W 3.3 35 85 23 125 1.2 6 1.6 237 213 95 1
TAJB475*035#NJ B 4.7 35 85 23 125 1.6 6 3.1 166 149 66 1
TAJC475*035#NJ C 4.7 35 85 23 125 1.6 6 2.2 224 201 89 1
TAJD475*035#NJ D 4.7 35 85 23 125 1.6 6 1.5 316 285 126 11)
TAJW475*035#NJ W 4.7 35 85 23 125 1.6 6 2.2 202 182 81 1
TAJC685*035#NJ C 6.8 35 85 23 125 2.4 6 1.8 247 222 99 1
TAJD685*035#NJ D 6.8 35 85 23 125 2.4 6 1.3 340 306 136 11)
TAJY685*035#NJ Y 6.8 35 85 23 125 2.3 6 0.9 373 335 149 11)
TAJC106*035#NJ C 10 35 85 23 125 3.5 6 1.6 262 236 105 1
TAJD106*035#NJ D 10 35 85 23 125 3.5 6 1 387 349 155 11)
TAJE106*035#NJ E 10 35 85 23 125 3.5 6 0.9 428 385 171 11)
TAJX106*035#NJ X 10 35 85 23 125 3.5 6 0.7 378 340 151 11)
TAJY106*035#NJ Y 10 35 85 23 125 3.5 6 1 354 318 141 11)
TAJC156*035#NJ C 15 35 85 23 125 5.3 6 1.4 280 252 112 1
TAJD156*035#NJ D 15 35 85 23 125 5.3 6 0.9 408 367 163 11)
TAJY156*035#NJ Y 15 35 85 23 125 5.3 6 0.6 456 411 183 11)
TAJD226*035#NJ D 22 35 85 23 125 7.7 6 0.9 408 367 163 11)
TAJE226*035#NJ E 22 35 85 23 125 7.7 6 0.5 574 517 230 11)
TAJY226*035#NJ Y 22 35 85 23 125 7.7 6 0.5 500 450 200 11)
TAJD336*035#NJ D 33 35 85 23 125 11.6 6 0.9 408 367 163 11)
TAJE336*035#NJ E 33 35 85 23 125 11.6 6 0.9 428 385 171 11)
TAJV336*035#NJ V 33 35 85 23 125 11.6 6 0.5 707 636 283 11)
TAJD476*035#NJV D 47 35 85 23 125 16.5 6 0.9 408 367 163 3
TAJE476*035#NJ E 47 35 85 23 125 16.5 6 0.9 428 385 171 11)
TAJV476*035#NJ V 47 35 85 23 125 16.5 6 0.4 791 712 316 11)
041422

TAJ Series
ESR
Size (μF) 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(Ω)
TAJV686*035#NJ V 68 35 85 23 125 23.8 6 0.5 707 636 283 11)
50 Volt @ 85°C
TAJA104*050#NJ A 0.1 50 85 33 125 0.5 4 22 58 53 23 1
TAJS104*050#NJ S 0.1 50 85 33 125 0.5 4 19 58 53 23 1
TAJA154*050#NJ A 0.15 50 85 33 125 0.5 4 15 71 64 28 1
TAJB154*050#NJ B 0.15 50 85 33 125 0.5 4 17 71 64 28 1
TAJS154*050#NJ S 0.15 50 85 33 125 0.5 4 16 64 57 25 1
TAJA224*050#NJ A 0.22 50 85 33 125 0.5 4 18 65 58 26 1
TAJB224*050#NJ B 0.22 50 85 33 125 0.5 4 14 78 70 31 1
TAJP224*050#NJ P 0.22 50 85 33 125 0.5 4 17 59 53 24 1
TAJR224*050#NJ R 0.22 50 85 33 125 0.5 4 17 57 51 23 1
TAJS224*050#NJ S 0.22 50 85 33 125 0.5 4 13 71 64 28 1
TAJA334*050#NJ A 0.33 50 85 33 125 0.5 4 17 66 60 27 1
TAJB334*050#NJ B 0.33 50 85 33 125 0.5 4 12 84 76 34 1
TAJP334*050#NJ P 0.33 50 85 33 125 0.5 4 17 59 53 24 1
TAJR334M050#NJ R 0.33 50 85 33 125 0.5 4 17 57 51 23 1
TAJS334*050#NJ S 0.33 50 85 33 125 0.5 4 11 77 69 31 1
TAJT334*050#NJ T 0.33 50 85 33 125 0.5 4 11 85 77 34 1
TAJA474*050#NJ A 0.47 50 85 33 125 0.5 4 9.5 89 80 36 1
TAJB474*050#NJ B 0.47 50 85 33 125 0.5 4 9.5 95 85 38 1
TAJC474*050#NJ C 0.47 50 85 33 125 0.5 4 8 117 106 47 1
TAJS474*050#NJ S 0.47 50 85 33 125 0.5 4 9.5 83 74 33 1
TAJT474*050#NJ T 0.47 50 85 33 125 0.5 4 9.5 92 83 37 1
TAJA684*050#NJ A 0.68 50 85 33 125 0.5 4 7.9 97 88 39 1
TAJB684*050#NJ B 0.68 50 85 33 125 0.5 4 8 103 93 41 1
TAJC684*050#NJ C 0.68 50 85 33 125 0.5 4 7 125 113 50 1
TAJA105*050#NJ A 1 50 85 33 125 0.5 4 6.6 107 96 43 1
TAJB105*050#NJ B 1 50 85 33 125 0.5 6 7 110 99 44 1
TAJC105*050#NJ C 1 50 85 33 125 0.5 4 5.5 141 127 57 1
TAJW105*050#NJ W 1 50 85 33 125 0.5 6 4.4 143 129 57 1
TAJB155*050#NJ B 1.5 50 85 33 125 0.8 8 5.4 125 113 50 1
TAJC155*050#NJ C 1.5 50 85 33 125 0.8 6 4.5 156 141 63 1
TAJD155*050#NJ D 1.5 50 85 33 125 0.8 6 4 194 174 77 11)
TAJW155*050#NJ W 1.5 50 85 33 125 0.8 6 3.1 170 153 68 1
TAJB225*050#NJ B 2.2 50 85 33 125 1.1 8 4.5 137 124 55 1
TAJC225*050#NJ C 2.2 50 85 33 125 1.1 8 2.5 210 189 84 1
TAJD225*050#NJ D 2.2 50 85 33 125 1.1 6 2.5 245 220 98 11)
TAJW225*050#NJ W 2.2 50 85 33 125 1.1 8 2.5 190 171 76 1
TAJC335*050#NJ C 3.3 50 85 33 125 1.6 6 2.5 210 189 84 1
TAJD335*050#NJ D 3.3 50 85 33 125 1.7 6 2 274 246 110 11)
TAJY335*050#NJ Y 3.3 50 85 33 125 1.7 4 1.5 289 260 115 11)
TAJC475*050#NJ C 4.7 50 85 33 125 2.4 6 1.4 280 252 112 1
TAJD475*050#NJ D 4.7 50 85 33 125 2.4 6 1.4 327 295 131 11)
TAJX475*050#NJV X 4.7 50 85 33 125 2.4 6 1.0 316 285 126 3
TAJY475*050#NJ Y 4.7 50 85 33 125 2.4 6 1.2 323 290 129 11)
TAJC685*050#NJ C 6.8 50 85 33 125 3.4 6 1 332 298 133 1
TAJD685*050#NJ D 6.8 50 85 33 125 3.4 6 1 387 349 155 11)
TAJY685*050#NJ Y 6.8 50 85 33 125 3.4 6 0.9 373 335 149 11)
TAJD106*050#NJ D 10 50 85 33 125 5 6 0.8 433 390 173 11)
TAJE106*050#NJ E 10 50 85 33 125 5 6 0.8 454 409 182 11)
TAJV106*050#NJ V 10 50 85 33 125 5 6 0.65 620 558 248 11)
TAJD156*050#NJ D 15 50 85 33 125 7.5 6 0.6 500 450 200 11)
TAJE156*050#NJ E 15 50 85 33 125 7.5 6 0.6 524 472 210 11)
TAJV156*050#NJ V 15 50 85 33 125 7.5 6 0.6 645 581 258 11)
TAJV226*050#NJ V 22 50 85 33 125 11 8 0.6 645 581 258 11)
11) – Dry pack option (see How to order) is recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.
Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz,
0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. For typical weight and composition see page 259.
NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards.
*Initial Limit
041422

TAJ Series
QUALIFICATION TABLE
TAJ series (Temperature range -55ºC to +125ºC)

TEST
Condition Characteristics
Visual examination no visible damage
Apply rated voltage (Ur) at 85ºC and / or category
voltage (Uc) at 125ºC for 2000 hours through a DCL 1.25 x initial limit
Endurance circuit impedance of ≤0.1Ω/V. Stabilize at room ΔC/C within ±10% of initial value
temperature for 1-2 hours before measuring.
DF initial limit
Store at 65ºC and 95% relative humidity for 500
hours, with no applied voltage. Stabilize at room DCL 1.5 x initial limit
Humidity temperature and humidity for 1-2 hours before ΔC/C within ±10% of initial value
measuring.
DF 1.2 x initial limit
Step Temperature°C Duration(min)
1 +20 15
+20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
2 -55 15 DCL IL* n/a IL* 10 x IL* 12.5 x IL* IL*
Temperature 3 +20 15
Stability 4 +85 15 ΔC/C n/a +0/-10% ±5% +10/-0% +12/-0% ±5%
5 +125 15
6 +20 15 DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL*
Apply 1.3x category voltage (Uc) at 125ºC for
Surge 1000 cycles of duration 6 min (30 sec charge, DCL initial limit
Voltage 5 min 30 sec discharge) through a charge / ΔC/C within ±5% of initial value
discharge resistance of 1000Ω
DF initial limit
DCL initial limit
Mechanical MIL-STD-202, Method 213, Condition C ΔC/C within ±5% of initial value
Shock
DF initial limit
ESR initial limit
DCL initial limit
Vibration MIL-STD-202, Method 204, Condition D ΔC/C within ±5% of initial value
DF initial limit
ESR initial limit
032720

TAJ Series
SOLID ELECTROLYTIC CAPACITOR ROADMAP
SERIES LINE UP: CONVENTIONAL SMD MnO2
High Rel. TMJ THH

ultra 230°C COTS+
& Special low DCL Hermetic
High Temp THJ THJ F97-HT3

200°C 175°C auto 135°C auto
TRJ TRM F91-AJ6 F97

Industrial & professional
professional
multianode
auto professional
Automotive
TAJ TPS F93-AJ6 F98-AJ6

auto *T/*U auto *T/*U auto auto
TPS TPM
multianode
Standard
TAJ F91 F93
Standard TAJ TAC TPC

microchip
F92
Low Profile microchip
Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab, undertab
fused
030321

TAJ Series – Automotive Product Range
TAJ Automotive Range
Standard Tantalum - Automotive Product Range
FEATURES
• General Purpose SMT Chip Tantalum Series
• 7 Case Sizes Available
LEAD-FREE COMPATIBLE
• CV Range: 0.22-680μF / 6.3-50V COMPONENT
APPLICATIONS
• Audio Systems
• GPS
• Seat Controls
• Dashboard
CASE DIMENSIONS: millimeters (inches)

EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
MARKING C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
A, B, C, D, E, Y CASE E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
1.50 (0.059) 1.00±0.10
227 = 220µF P 0805 2012-15 2.05 (0.081) 1.35 (0.053) 0.50 (0.020) 0.85 (0.033)
max. (0.039±0.004)
Polarity
A = 10V
Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
(Anode+)
XXXXX ID Code W1 dimension applies to the termination width for A dimensional area only.
P CASE
Capacitance Value in pF
106 = 10µF
Polarity
Band 106
(Anode+)
A Rated Voltage Code
A = 10V
HOW TO ORDER
TAJ C 106 M 035 T NJ V
Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging Specification Dry Pack
See table pF code: 1st two K = ±10% 006 = 6.3Vdc 025 = 25Vdc T = Automotive Lead Suffix Option
above digits represent M = ±20% 010 = 10Vdc 035 = 35Vdc Free 7" Reel NJ = Std Suffix (D,E,Y case sizes
significant figures, 016 = 16Vdc 050 = 50Vdc U = Automotive Lead mandatory)
3rd digit represents 020 = 20Vdc Free 13" Reel
multiplier (number of
zeros to follow)
Rated Voltage (VR) ≤ +85°C: 6.3 10 16 20 25 35 50
Category Voltage (VC) ≤ +125°C: 4 7 10 13 17 23 33
Surge Voltage (VS) ≤ +85°C: 8 13 20 26 32 46 65
Environmental Classification: 55/125/56 (IEC 68-2)
Meets requirements of AEC-Q200
102020

TAJ AUTOMOTIVE RANGE
CAPACITANCE AND RATED VOLTAGE RANGE
Capacitance Rated voltage DC (VR to 85°C

μF Code 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
0.10 104
0.15 154
0.22 224 A
0.33 334 A A
0.47 474 A A A/B
0.68 684 A A B
1.0 105 A A A A/B B/C
1.5 155 A A/B A/B C
2.2 225 A A A/B A/B B/C C/D
3.3 335 A A/B A/B A/B B/C C/D
4.7 475 A/B A/B A/B B/C B/C/D C/D
6.8 685 A/B A/B A/B/C B/C C/D D
10 106 A/B A/B/P A/B/C B/C B/C/D C/D/Y D/E
15 156 A/P A/B/C B/C B/C C/D/Y D/Y E
22 226 A/B/C A/B/C B/C/D B/C/D/Y C/D/Y D/E
33 336 A/B B/C B/C/D/Y C/D/Y D D/E
47 476 A/B/C B/C/D C/D/Y D/Y D/E E
68 686 B/C B/C/D/Y C/D/Y D/E E
100 107 B/C/D/Y C/D/Y D/E E E
150 157 C/D/Y D/E/Y D/E
220 227 C/D/Y D/E E
330 337 D/E D/E
470 477 D/E
680 687 D/E
Released ratings
Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability
standards.
073021

Rated Rated Category Category DCL DF ESR Max. 100kHz RMS Current (mA)
Case Capacitance
Part Number Voltage Temperature Voltage Temperature Max. Max. @ 100kHz MSL
Size (μF) 25ºC 85ºC 125ºC
(V) (ºC) (V) (ºC) (μA) (%) (Ω)
6.3 Volt @ 85°C
TAJA335*006TNJ A 3.3 6.3 85 4 125 0.5 6 7 104 93 41 1
TAJA106*006TNJ A 10 6.3 85 4 125 0.6 6 4 137 123 55 1
TAJB106*006TNJ B 10 6.3 85 4 125 0.5 6 3 168 151 67 1
TAJA156*006TNJ A 15 6.3 85 4 125 0.9 6 3.5 146 132 59 1
TAJP156*006TNJ P 15 6.3 85 4 125 0.9 8 3.5 131 118 52 1
TAJA226*006TNJ A 22 6.3 85 4 125 1.4 6 3 158 142 63 1
TAJB226*006TNJ B 22 6.3 85 4 125 1.4 6 2.5 184 166 74 1
TAJC226*006TNJ C 22 6.3 85 4 125 1.4 6 2 235 211 94 1
TAJA336*006TNJ A 33 6.3 85 4 125 2.1 8 2.2 185 166 74 1
TAJB336*006TNJ B 33 6.3 85 4 125 2.1 6 2.2 197 177 79 1
TAJA476*006TNJ A 47 6.3 85 4 125 2.8 10 1.6 217 195 87 1
TAJB476*006TNJ B 47 6.3 85 4 125 3 6 2 206 186 82 1
TAJC476*006TNJ C 47 6.3 85 4 125 3 6 1.6 262 236 105 1
TAJB686*006TNJ B 68 6.3 85 4 125 4 8 0.9 307 277 123 1
TAJC686*006TNJ C 68 6.3 85 4 125 4.3 6 1.5 271 244 108 1
TAJB107*006TNJ B 100 6.3 85 4 125 6.3 10 1.4 246 222 99 1
TAJC107*006TNJ C 100 6.3 85 4 125 6.3 6 0.9 350 315 140 1
TAJD107*006TNJV D 100 6.3 85 4 125 6.3 6 0.9 408 367 163 3
TAJY107*006TNJV Y 100 6.3 85 4 125 6.3 6 0.7 423 380 169 3
TAJC157*006TNJ C 150 6.3 85 4 125 9.5 6 1.3 291 262 116 1
TAJD157*006TNJV D 150 6.3 85 4 125 9.5 6 0.9 408 367 163 3
TAJY157*006TNJV Y 150 6.3 85 4 125 9.5 6 0.4 559 503 224 3
TAJC227*006TNJ C 220 6.3 85 4 125 8.8 8 1.2 303 272 121 1
TAJD227*006TNJV D 220 6.3 85 4 125 13.9 8 0.4 612 551 245 3
TAJY227*006TNJV Y 220 6.3 85 4 125 13.9 8 0.7 423 380 169 3
TAJD337*006TNJV D 330 6.3 85 4 125 20.8 8 0.4 612 551 245 3
TAJE337*006TNJV E 330 6.3 85 4 125 20.8 8 0.4 642 578 257 3
TAJD477*006TNJV D 470 6.3 85 4 125 28 12 0.4 612 551 245 3
TAJE477*006TNJV E 470 6.3 85 4 125 28 10 0.4 642 578 257 3
TAJD687*006TNJV D 680 6.3 85 4 125 40.8 20 0.5 548 493 219 3
TAJE687*006TNJV E 680 6.3 85 4 125 42.8 10 0.5 574 517 230 3
10 Volt @ 85°C
TAJA225*010TNJ A 2.2 10 85 7 125 0.5 6 7 104 93 41 1
TAJA475*010TNJ A 4.7 10 85 7 125 0.5 6 5 122 110 49 1
TAJB475*010TNJ B 4.7 10 85 7 125 0.5 6 4 146 131 58 1
TAJA685*010TNJ A 6.8 10 85 7 125 0.7 6 4 137 123 55 1
TAJB685*010TNJ B 6.8 10 85 7 125 0.7 6 3 168 151 67 1
TAJA106*010TNJ A 10 10 85 7 125 1 6 3 158 142 63 1
TAJB106*010TNJ B 10 10 85 7 125 1 6 2.1 201 181 80 1
TAJP106*010TNJ P 10 10 85 7 125 1 8 6 100 90 40 1
TAJA156*010TNJ A 15 10 85 7 125 1.5 6 3.2 153 138 61 1
TAJB156*010TNJ B 15 10 85 7 125 1.5 6 2.8 174 157 70 1
TAJC156*010TNJ C 15 10 85 7 125 1.5 6 2 235 211 94 1
TAJA226*010TNJ A 22 10 85 7 125 2.2 8 3 158 142 63 1
TAJB226*010TNJ B 22 10 85 7 125 2.2 6 2.4 188 169 75 1
TAJC226*010TNJ C 22 10 85 7 125 2.2 6 1.8 247 222 99 1
TAJB336*010TNJ B 33 10 85 7 125 3.3 6 1.8 217 196 87 1
TAJC336*010TNJ C 33 10 85 7 125 3.3 6 1.6 262 236 105 1
TAJB476*010TNJ B 47 10 85 7 125 4.7 8 1 292 262 117 1
TAJC476*010TNJ C 47 10 85 7 125 4.7 6 1.2 303 272 121 1
TAJD476*010TNJV D 47 10 85 7 125 4.7 6 0.4 612 551 245 3
TAJB686*010TNJ B 68 10 85 7 125 6.8 8 1.4 246 222 99 1
TAJC686*010TNJ C 68 10 85 7 125 6.8 6 1.3 291 262 116 1
TAJD686*010TNJV D 68 10 85 7 125 6.8 6 0.9 408 367 163 3
TAJY686*010TNJV Y 68 10 85 7 125 6.8 6 0.9 373 335 149 3
TAJC107*010TNJ C 100 10 85 7 125 10 8 1.2 303 272 121 1
TAJD107*010TNJV D 100 10 85 7 125 10 6 0.9 408 367 163 3
TAJY107*010TNJV Y 100 10 85 7 125 10 6 0.9 373 335 149 3
TAJD157*010TNJV D 150 10 85 7 125 15 8 0.9 408 367 163 3
TAJE157*010TNJV E 150 10 85 7 125 15 8 0.9 428 385 171 3
TAJY157*010TNJV Y 150 10 85 7 125 15 6 1.2 323 290 129 3
TAJD227*010TNJV D 220 10 85 7 125 22 8 0.5 548 493 219 3
TAJE227*010TNJV E 220 10 85 7 125 22 8 0.5 574 517 230 3
TAJD337*010TNJV D 330 10 85 7 125 33 8 0.9 408 367 163 3
TAJE337*010TNJV E 330 10 85 7 125 33 8 0.9 428 385 171 3
16 Volt @ 85°C
TAJA105*016TNJ A 1 16 85 10 125 0.5 4 11 83 74 33 1
TAJA225*016TNJ A 2.2 16 85 10 125 0.5 6 6.5 107 97 43 1
TAJA335*016TNJ A 3.3 16 85 10 125 0.5 6 5 122 110 49 1
TAJB335*016TNJ B 3.3 16 85 10 125 0.5 6 4.5 137 124 55 1
TAJA475*016TNJ A 4.7 16 85 10 125 0.8 6 4 137 123 55 1
073021

ESR 100kHz RMS Current (mA)
Rated Rated Category Category DCL DF
Case Capacitance Max.
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(Ω)
TAJB475*016TNJ B 4.7 16 85 10 125 0.8 6 3.5 156 140 62 1
TAJA685*016TNJ A 6.8 16 85 10 125 1.1 6 3.5 146 132 59 1
TAJB685*016TNJ B 6.8 16 85 10 125 1.1 6 2.5 184 166 74 1
TAJA106*016TNJ A 10 16 85 10 125 1.6 6 3 158 142 63 1
TAJB106*016TNJ B 10 16 85 10 125 1.6 6 2.5 184 166 74 1
TAJC106*016TNJ C 10 16 85 10 125 1.6 6 2 235 211 94 1
TAJB156*016TNJ B 15 16 85 10 125 2.4 6 2.5 184 166 74 1
TAJC156*016TNJ C 15 16 85 10 125 2.4 6 1.8 247 222 99 1
TAJB226*016TNJ B 22 16 85 10 125 3.5 6 2.3 192 173 77 1
TAJC226*016TNJ C 22 16 85 10 125 3.5 6 1 332 298 133 1
TAJD226*016TNJV D 22 16 85 10 125 3.5 6 1.1 369 332 148 3
TAJB336*016TNJ B 33 16 85 10 125 5.3 8 2.1 201 181 80 1
TAJC336*016TNJ C 33 16 85 10 125 5.3 6 1.5 271 244 108 1
TAJD336*016TNJV D 33 16 85 10 125 5.3 6 0.9 408 367 163 3
TAJY336*016TNJV Y 33 16 85 10 125 5.3 6 0.9 373 335 149 3
TAJC476*016TNJ C 47 16 85 10 125 7.5 6 0.5 469 422 188 1
TAJD476*016TNJV D 47 16 85 10 125 7.5 6 0.9 408 367 163 3
TAJY476*016TNJV Y 47 16 85 10 125 7.5 6 0.7 423 380 169 3
TAJC686*016TNJ C 68 16 85 10 125 10.9 6 1.3 291 262 116 1
TAJD686*016TNJV D 68 16 85 10 125 10.9 6 0.9 408 367 163 3
TAJY686*016TNJV Y 68 16 85 10 125 10.9 6 0.9 373 335 149 3
TAJD107*016TNJV D 100 16 85 10 125 16 6 0.6 500 450 200 3
TAJE107*016TNJV E 100 16 85 10 125 16 6 0.9 428 385 171 3
TAJD157*016TNJV D 150 16 85 10 125 24 6 0.9 408 367 163 3
TAJE157*016TNJV E 150 16 85 10 125 24 8 0.3 742 667 297 3
TAJE227*016TNJV E 220 16 85 10 125 35.2 10 0.5 574 517 230 3
20 Volt @ 85°C
TAJA105*020TNJ A 1 20 85 13 125 0.5 4 9 91 82 37 1
TAJA155*020TNJ A 1.5 20 85 13 125 0.5 6 6.5 107 97 43 1
TAJA225*020TNJ A 2.2 20 85 13 125 0.5 6 5.3 119 107 48 1
TAJB225*020TNJ B 2.2 20 85 13 125 0.5 6 3.5 156 140 62 1
TAJA335*020TNJ A 3.3 20 85 13 125 0.7 6 4.5 129 116 52 1
TAJB335*020TNJ B 3.3 20 85 13 125 0.7 6 3 168 151 67 1
TAJA475*020TNJ A 4.7 20 85 13 125 0.9 6 4 137 123 55 1
TAJB475*020TNJ B 4.7 20 85 13 125 0.9 6 3 168 151 67 1
TAJA685*020TNJ A 6.8 20 85 13 125 1.4 6 2.4 177 159 71 1
TAJB685*020TNJ B 6.8 20 85 13 125 1.4 6 2.5 184 166 74 1
TAJC685*020TNJ C 6.8 20 85 13 125 1.4 6 2 235 211 94 1
TAJB106*020TNJ B 10 20 85 13 125 2 6 2.1 201 181 80 1
TAJC106*020TNJ C 10 20 85 13 125 2 6 1.2 303 272 121 1
TAJB156*020TNJ B 15 20 85 13 125 3 6 2 206 186 82 1
TAJC156*020TNJ C 15 20 85 13 125 3 6 1.7 254 229 102 1
TAJB226*020TNJ B 22 20 85 13 125 4.4 6 1.8 217 196 87 1
TAJC226*020TNJ C 22 20 85 13 125 4.4 6 1.6 262 236 105 1
TAJD226*020TNJV D 22 20 85 13 125 4.4 6 0.9 408 367 163 3
TAJY226*020TNJV Y 22 20 85 13 125 4.4 6 0.9 373 335 149 3
TAJC336*020TNJ C 33 20 85 13 125 6.6 6 1.5 271 244 108 1
TAJD336*020TNJV D 33 20 85 13 125 6.6 6 0.9 408 367 163 3
TAJY336*020TNJV Y 33 20 85 13 125 6.6 6 0.6 456 411 183 3
TAJD476*020TNJV D 47 20 85 13 125 9.4 6 0.9 408 367 163 3
TAJY476*020TNJV Y 47 20 85 13 125 9.4 6 0.9 373 335 149 3
TAJD686*020TNJV D 68 20 85 13 125 13.6 6 0.4 612 551 245 3
TAJE686*020TNJV E 68 20 85 13 125 13.6 6 0.9 428 385 171 3
TAJE107*020TNJV E 100 20 85 13 125 20 6 0.4 642 578 257 3
25 Volt @ 85°C
TAJA474*025TNJ A 0.47 25 85 17 125 0.5 4 14 73 66 29 1
TAJA684*025TNJ A 0.68 25 85 17 125 0.5 4 10 87 78 35 1
TAJA105*025TNJ A 1 25 85 17 125 0.5 4 8 97 87 39 1
TAJA155*025TNJ A 1.5 25 85 17 125 0.5 6 7.5 100 90 40 1
TAJB155*025TNJ B 1.5 25 85 17 125 0.5 6 5 130 117 52 1
TAJA225*025TNJ A 2.2 25 85 17 125 0.6 6 7 104 93 41 1
TAJB225*025TNJ B 2.2 25 85 17 125 0.6 6 4.5 137 124 55 1
TAJA335*025TNJ A 3.3 25 85 17 125 0.8 6 3.7 142 128 57 1
TAJB335*025TNJ B 3.3 25 85 17 125 0.8 6 3.5 156 140 62 1
TAJB475*025TNJ B 4.7 25 85 17 125 1.2 6 1.5 238 214 95 1
TAJC475*025TNJ C 4.7 25 85 17 125 1.2 6 2.4 214 193 86 1
TAJB685*025TNJ B 6.8 25 85 17 125 1.7 6 2.8 174 157 70 1
TAJC685*025TNJ C 6.8 25 85 17 125 1.7 6 2 235 211 94 1
TAJB106*025TNJ B 10 25 85 17 125 2.5 6 2.5 184 166 74 1
TAJC106*025TNJ C 10 25 85 17 125 2.5 6 1.8 247 222 99 1
TAJD106*025TNJV D 10 25 85 17 125 2.5 6 1.2 354 318 141 3
TAJC156*025TNJ C 15 25 85 17 125 3.8 6 1.6 262 236 105 1
073021

Rated Rated Category Category ESR Max. 100kHz RMS Current (mA)
Case Capacitance Voltage Temperature Voltage Temperature DCL Max. DF Max. @
Part Number 100kHz MSL
Size (μF) (μA) (%) 25ºC 85ºC 125ºC
(V) (ºC) (V) (ºC) (Ω)
TAJD156*025TNJV D 15 25 85 17 125 3.8 6 1 387 349 155 3
TAJY156*025TNJV Y 15 25 85 17 125 3.8 6 1 354 318 141 3
TAJC226*025TNJ C 22 25 85 17 125 5.5 6 1.4 280 252 112 1
TAJD226*025TNJV D 22 25 85 17 125 5.5 6 0.9 408 367 163 3
TAJY226*025TNJV Y 22 25 85 17 125 5.5 6 0.8 395 356 158 3
TAJD336*025TNJV D 33 25 85 17 125 8.3 6 0.9 408 367 163 3
TAJD476*025TNJV D 47 25 85 17 125 11.8 6 0.9 408 367 163 3
TAJE476*025TNJV E 47 25 85 17 125 11.8 6 0.9 428 385 171 3
TAJE686*025TNJV E 68 25 85 17 125 17 6 0.9 428 385 171 3
TAJE107*025TNJV E 100 25 85 17 125 25 10 0.3 742 667 297 3
35 Volt @ 85°C
TAJA334*035TNJ A 0.33 35 85 23 125 0.5 4 15 71 64 28 1
TAJA474*035TNJ A 0.47 35 85 23 125 0.5 4 12 79 71 32 1
TAJA684*035TNJ A 0.68 35 85 23 125 0.5 4 8 97 87 39 1
TAJA105*035TNJ A 1 35 85 23 125 0.5 4 7.5 100 90 40 1
TAJB105*035TNJ B 1 35 85 23 125 0.5 4 6.5 114 103 46 1
TAJA155*035TNJ A 1.5 35 85 23 125 0.5 6 7.5 100 90 40 1
TAJB155*035TNJ B 1.5 35 85 23 125 0.5 6 5.2 128 115 51 1
TAJB225*035TNJ B 2.2 35 85 23 125 0.8 6 4.2 142 128 57 1
TAJC225*035TNJ C 2.2 35 85 23 125 0.8 6 3.5 177 160 71 1
TAJB335*035TNJ B 3.3 35 85 23 125 1.2 6 3.5 156 140 62 1
TAJC335*035TNJ C 3.3 35 85 23 125 1.2 6 2.5 210 189 84 1
TAJB475*035TNJ B 4.7 35 85 23 125 1.6 6 3.1 166 149 66 1
TAJC475*035TNJ C 4.7 35 85 23 125 1.6 6 2.2 224 201 89 1
TAJD475*035TNJV D 4.7 35 85 23 125 1.6 6 1.5 316 285 126 3
TAJC685*035TNJ C 6.8 35 85 23 125 2.4 6 1.8 247 222 99 1
TAJD685*035TNJV D 6.8 35 85 23 125 2.4 6 1.3 340 306 136 3
TAJC106*035TNJ C 10 35 85 23 125 3.5 6 1.6 262 236 105 1
TAJD106*035TNJV D 10 35 85 23 125 3.5 6 1 387 349 155 3
TAJY106*035TNJV Y 10 35 85 23 125 3.5 6 1 354 318 141 3
TAJD156*035TNJV D 15 35 85 23 125 5.3 6 0.9 408 367 163 3
TAJY156*035TNJV Y 15 35 85 23 125 5.3 6 0.6 456 411 183 3
TAJD226*035TNJV D 22 35 85 23 125 7.7 6 0.9 408 367 163 3
TAJE226*035TNJV E 22 35 85 23 125 7.7 6 0.5 574 517 230 3
TAJD336*035TNJV D 33 35 85 23 125 11.6 6 0.9 408 367 163 3
TAJE336*035TNJV E 33 35 85 23 125 11.6 6 0.9 428 385 171 3
TAJE476*035TNJV E 47 35 85 23 125 16.5 6 0.9 428 385 171 3
50 Volt @ 85°C
TAJA224*050TNJ A 0.22 50 85 33 125 0.5 4 18 65 58 26 1
TAJA334*050TNJ A 0.33 50 85 33 125 0.5 4 17 66 60 27 1
TAJA474*050TNJ A 0.47 50 85 33 125 0.5 4 9.5 89 80 36 1
TAJB474*050TNJ B 0.47 50 85 33 125 0.5 4 9.5 95 85 38 1
TAJB684*050TNJ B 0.68 50 85 33 125 0.5 4 8 103 93 41 1
TAJB105*050TNJ B 1 50 85 33 125 0.5 6 7 110 99 44 1
TAJC105*050TNJ C 1 50 85 33 125 0.5 4 5.5 141 127 57 1
TAJC155*050TNJ C 1.5 50 85 33 125 0.8 6 4.5 156 141 63 1
TAJC225*050TNJ C 2.2 50 85 33 125 1.1 8 2.5 210 189 84 1
TAJD225*050TNJV D 2.2 50 85 33 125 1.1 6 2.5 245 220 98 3
TAJC335*050TNJ C 3.3 50 85 33 125 1.6 6 2.5 210 189 84 1
TAJD335*050TNJV D 3.3 50 85 33 125 1.7 6 2 274 246 110 3
TAJC475*050TNJ C 4.7 50 85 33 125 2.4 6 1.4 280 252 112 1
TAJD475*050TNJV D 4.7 50 85 33 125 2.4 6 1.4 327 295 131 3
TAJD685*050TNJV D 6.8 50 85 33 125 3.4 6 1 387 349 155 3
TAJD106*050TNJV D 10 50 85 33 125 5 6 0.8 433 390 173 3
TAJE106*050TNJV E 10 50 85 33 125 5 6 1 406 366 162 3
TAJE156*050TNJV E 15 50 85 33 125 7.5 6 0.6 524 472 210 3
Moisture Sensitivity Level (MSL) is defined according to J-STD-020

*Please use "U" instead of "T" in the suffix letter for 13'' reel packaging
Please use specific PN for automotive version – see “HOW TO ORDER”.
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
For typical weight and composition see page 259.
081821

QUALIFICATION TABLE
TAJ automotive series (Temperature range -55ºC to +125ºC)
TEST
Apply rated voltage (Ur) at 85ºC and / or category DCL 1.25 x initial limit
voltage (Uc) at 125ºC for 2000 hours through a
Endurance circuit impedance of ≤0.1Ω/V. Stabilize at room
ΔC/C within ±10% of initial value
temperature for 1-2 hours before measuring. DF initial limit
ESR initial limit
Store at 125ºC, no voltage applied, for 2000 hours. DCL 1.25 x initial limit
Storage Life Stabilize at room temperature for 1-2 hours before ΔC/C within ±10% of initial value
measuring. DF initial limit
ESR initial limit
Store at 65ºC and 95% relative humidity for 500 DCL 1.5 x initial limit
hours, with no applied voltage. Stabilize at room
Humidity temperature and humidity for 1-2 hours before
measuring. DF 1.2 x initial limit
ESR initial limit
Apply rated voltage (Ur) at 85ºC, 85% relative DCL 2 x initial limit
Biased humidity for 1000 hours. Stabilize at room
ESR initial limit
Step Temperature°C Duration(min) +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
1 +20 15
DCL IL* n/a IL* 10 x IL* 12.5 x IL* IL*
2 -55 15
Temperature 3 +20 15 ΔC/C n/a +0/-10% ±5% +10/-0% +12/-0% ±5%
Stability 4 +85 15
DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL*
5 +125 15
6 +20 15 ESR IL* 2 x IL* IL* IL* IL* IL*
Apply 1.3x category voltage (Uc) at 125ºC for DCL initial limit
Surge 1000 cycles of duration 6 min (30 sec charge,
Voltage 5 min 30 sec discharge) through a charge /
discharge resistance of 1000Ω DF initial limit
ESR initial limit
DCL initial limit
Mechanical MIL-STD-202, Method 213, Condition F ΔC/C within ±5% of initial value
Shock
DF initial limit
ESR initial limit
DCL initial limit
DF initial limit
ESR initial limit
*Initial Limit
032720

High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

microchip
F92
Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab, undertab
fused
030321

F92 Series – Low Profile
F92 Series
Resin-Molded Chip, Low Profile J-Lead
FEATURES
• Compliant to the RoHS3 directive 2015/863/EU
• SMD J-Lead
• Low Profile Case Sizes
• 100% Surge Current Tested LEAD-FREE COMPATIBLE
COMPONENT
APPLICATIONS
• Handheld Electronics
• USB Accessories

EIA EIA L ± 0.20 W+0.20 (0.008) W1 ±0.20 A+0.30 (0.012)
Code H Max. S Min.
Code Metric (0.008) -0.10 (0.004) (0.008) -0.20 (0.008)
1.00 ± 0.10
P 0805 2012-12 2.05 (0.081) 1.30 (0.051) 1.20 (0.047) 0.50 (0.020) 0.85 (0.033)
(0.039 ± 0.004)
A 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
W1 dimension applies to the termination width for a dimensional area only
MARKING
P CASE A, B CASE
Capacitance Value in pF LOGO Capacitance Value in pF
106 = 10μF 226 = 22μF
Rated Voltage Code
Polarity
106 Polarity 226 A A = 10V
Band Band
(Anode+) J (Anode+)
xxxxx ID Code
Rated Voltage Code
J = 6.3V
4V G 16V C 35V V
6.3V J 20V D
10V A 25V E
*Capacitance code of “P” case products are as shown below.
HOW TO ORDER
F92 0J 106 M P 
Type Rated Capacitance Code Tolerance Case Packaging

Voltage pF code: 1st two K = ±10% Size See Tape & Reel
digits represent M = ±20% See Packaging Section
significant figures, table
3rd digit represents above
zeros to follow)
Category Temperature Range -55 to +125°C
Rated Temperature +85°C
Capacitance Tolerance ±20%, ±10% at 120Hz
Dissipation Factor Refer to next page
ESR 100kHz Refer to next page
Leakage Current After 1 minute’s application of rated voltage, leakage current at 20°C is not
more than 0.01CV or 0.5μA, whichever is greater.
After 1 minute’s application of rated voltage, leakage current at 85°C is not
more than 0.1CV or 5μA, whichever is greater.
After 1 minute’s application of derated voltage, leakage current at 125°C is not
Capacitance Change By Temperature P Case A, B Case
+20% Max. at +125ºC +15% Max. at +125°C
+15% Max. at +85ºC +10% Max. at +85°C
-15% Max. at -55ºC -10% Max. at -55°C
090121

F92 Series
Capacitance Rated Voltage *Cap
μF Code 4V (0G) 6.3V (0J) 10V (1A) 16V (1C) 20V (1D) 25V (1E) 35V (1V) Code
0.22 224 A J
0.33 334 A N
0.47 474 P A/P A S
0.68 684 P A W
1.0 105 P P A/P P A A
1.5 155 P A E
2.2 225 P P A/P A/B B J
3.3 335 P P A/P A N
4.7 475 P P A/P A/B B S
6.8 685 P P P B w
10 106 P A/P A/P(M) B a
15 156 P P(M) A e
22 226 A A/P(M) B j
33 336 B n
47 476 B B s
68 686 w
100 107 A(M)/B A
**Rated temperature 60ºC only. Please contact KYOCERA AVX when you need detail spec.
Please contact to your local KYOCERA AVX sales office when these series are being designed in your application.

Capacitance Rated DF @ 120Hz ESR @ 100kHz RMS Current (mA)
Part Number Case Size DCL (μA) *1 ΔC/C (%) MSL
(μF) Voltage (V) (%) 100kHz (Ω) 25ºC 60ºC 85ºC 125ºC
4 Volt
F920G335#PA P 3.3 4 0.5 8 12.0 50 – 45 20 * 1
F920G475#PA P 4.7 4 0.5 8 6.0 71 – 64 28 * 1
F920G685#PA P 6.8 4 0.5 10 6.0 71 – 64 28 * 1
F920G106#PA P 10 4 0.5 10 6.0 71 – 64 28 * 1
F920G156#PA P 15 4 0.6 10 5.0 77 – 70 31 * 1
F920G226#AA A 22 4 0.9 12 2.8 146 – 132 59 * 1
F920G476#BA B 47 4 1.9 12 1.7 210 – 189 84 * 1
F920G107MAA A 100 4 4.0 30 2.8 146 – 132 59 ±15 1
F920G107#BA B 100 4 4.0 18 1.3 240 – 216 96 * 1
6.3 Volt
F920J225#PA P 2.2 6.3 0.5 8 12.0 50 – 45 20 * 1
F920J335#PA P 3.3 6.3 0.5 8 12.0 50 – 45 20 * 1
F920J475#PA P 4.7 6.3 0.5 8 6.0 71 – 64 28 * 1
F920J685#PA P 6.8 6.3 0.5 10 6.0 71 – 64 28 * 1
F920J106#AA A 10 6.3 0.6 8 4.0 122 – 110 49 * 1
F920J106#PA P 10 6.3 0.6 10 6.0 71 – 64 28 * 1
F920J156MPA P 15 6.3 0.9 10 6.0 71 – 64 28 * 1
F920J226#AA A 22 6.3 1.4 12 2.8 146 – 132 59 * 1
F920J226MPA P 22 6.3 1.4 20 5.0 77 – 70 31 * 1
F920J336#BA B 33 6.3 2.1 12 1.7 210 – 189 84 * 1
F920J476#BA B 47 6.3 3.0 12 1.7 210 – 189 84 * 3
10 Volt
F921A105#PA P 1 10 0.5 8 12.0 50 – 45 20 * 1
F921A155#PA P 1.5 10 0.5 8 12.0 50 – 45 20 * 1
F921A225#PA P 2.2 10 0.5 8 12.0 50 – 45 20 * 1
F921A335#AA A 3.3 10 0.5 6 7.0 93 – 83 37 * 1
F921A335#PA P 3.3 10 0.5 8 12.0 50 – 45 20 * 1
F921A475#AA A 4.7 10 0.5 6 4.0 122 – 110 49 * 1
F921A475#PA P 4.7 10 0.5 8 6.0 71 – 64 28 * 1
F921A685#PA P 6.8 10 0.7 8 6.0 71 – 64 28 * 1
F921A106#AA A 10 10 1.0 8 4.0 122 – 110 49 * 1
F921A106MPA P 10 10 1.0 14 6.0 71 – 64 28 * 1
F921A156#AA A 15 10 1.5 8 4.0 122 – 110 49 * 1
F921A226#BA B 22 10 2.2 8 1.9 199 – 179 79 * 3
16 Volt
F921C474#PA P 0.47 16 0.5 8 20.0 39 – 35 15 * 1
063021

F92 Series
Capacitance Rated DF @ 120Hz ESR @ 100kHz RMS Current (mA)
Part Number Case Size DCL (μA) *1 ΔC/C (%) MSL
(μF) Voltage (V) (%) 100kHz (Ω) 25ºC 60ºC 85ºC 125ºC
F921C684#PA P 0.68 16 0.5 8 12.0 50 – 45 20 * 1
F921C105#PA P 1 16 0.5 8 12.0 50 – 45 20 * 1
F921C225#AA A 2.2 16 0.5 6 7.0 93 – 83 37 * 1
F921C225#PA P 2.2 16 0.5 8 12.0 50 – 45 20 * 1
F921C335#AA A 3.3 16 0.5 6 7.0 93 – 83 37 * 1
F921C475#AA A 4.7 16 0.8 6 7.0 93 – 83 37 * 1
F921C475#BA B 4.7 16 0.8 6 3.0 158 – 142 63 * 1
F921C685#BA B 6.8 16 1.1 6 3.0 158 – 142 63 * 1
F921C106#BA B 10 16 1.6 6 2.0 194 – 174 77 * 1
20 Volt
F921D474#AA A 0.47 20 0.5 4 10.0 77 – 70 31 * 1
F921D474#PA P 0.47 20 0.5 8 20.0 39 – 35 15 * 1
F921D684#AA A 0.68 20 0.5 4 10.0 77 – 70 31 * 1
F921D105#AA A 1 20 0.5 4 10.0 77 – 70 31 * 1
F921D105#PA P 1 20 0.5 8 20.0 39 – 35 15 * 1
F921D155#AA A 1.5 20 0.5 6 7.4 90 – 81 36 * 1
25 Volt
F921E105#PA P 1 25 0.5 8 20.0 39 – 35 15 * 1
F921E225#AA A 2.2 25 0.6 8 10.0 77 – 70 31 ±15 1
F921E225#BA B 2.2 25 0.6 6 4.0 137 – 123 55 * 1
F921E475#BA B 4.7 25 1.2 6 3.0 158 – 142 63 * 1
35 Volt
F921V224#AA A 0.22 35 0.5 4 10.0 77 – 70 31 * 1
F921V334#AA A 0.33 35 0.5 4 10.0 77 – 70 31 * 1
F921V474#AA A 0.47 35 0.5 4 10.0 77 – 70 31 * 1
F921V105#AA A 1 35 0.5 6 10.0 77 – 70 31 * 1
F921V225#BA B 2.2 35 0.8 6 4.0 137 – 123 55 ±10 1
*1: ΔC/C Marked “*”

Item P Case (%) A, B Case (%) #: "M" for ±20% tolerance, "K" for ± 10% tolerance. When you need K tolerance for the part numbers which have M
Damp Heat ±20 ±10 tolerance only, please contact to your local KYOCERA AVX sales office.
Temperature cycles ±10 ±5
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
Resistance soldering heat ±10 ±5
Surge ±10 ±5
Endurance ±10 ±10
030121

F92 Series
QUALIFICATION TABLE
F92 series (Temperature range -55ºC to +125ºC)
TEST
Condition
P Case A, B Case
At 40°C, 90 to 95% R.H., 500 hours (No voltage applied)
Damp Heat
Capacitance Change .................Refer to the table above (*1) Refer to the table above (*1)
(Steady State) Dissipation Factor.......................150% or less than the initial specified value Initial specified value or less
Leakage Current . ....................... Initial specified value or less Initial specified value or less
-55°C / +125°C, 30 minutes each, 5 cycles
Capacitance Change .................Refer to the table above (*1) Refer to the table above (*1)
Temperature Cycles Dissipation Factor . ....................150% or less than the initial specified value Initial specified value or less
Leakage Current . .......................Initial specified value or less Initial specified value or less
10 seconds reflow at 260°C, 5 seconds immersion at 260°C.
Resistance to Capacitance Change..................Refer to the table above (*1) Refer to the table above (*1)
Soldering Heat Dissipation Factor . ....................150% or less than the initial specified value Initial specified value or less
Leakage Current . .......................Initial specified value or less Initial specified value or less
After application of surge voltage in series with a 33Ω (For “P” case: 1kΩ) resistor at the rate of 30 seconds ON, 30 seconds
OFF, for 1000 successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above.
Surge Capacitance Change..................Refer to the table above (*1) Refer to the table above (*1)
Dissipation Factor . ....................150% or less than the initial specified value Initial specified value or less
Leakage Current . ....................... Initial specified value or less Initial specified value or less
After 2000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C, or derated voltage in series with a 3Ω
resistor at 125°C, capacitors shall meet the characteristic requirements in the table above.
Endurance Capacitance Change ................. Refer to the table above (*1) Refer to the table above (*1)
Dissipation Factor ...................... 150% or less than the initial specified value Initial specified value or less
Leakage Current ......................... Initial specified value or less Initial specified value or less
After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor
Shear Test side body which has no electrode and has been soldered beforehand on a substrate, there shall
be found neither exfoliation nor its sign at the terminal electrode.
Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at
both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength
Terminal Strength is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as
illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals.
081821

F92 Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

microchip
F92
Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab, undertab
fused
030321

F93 Series
F93 Series
Resin-Molded Chip, Standard Tantalum J-Lead
FEATURES
• SMD J-Lead
COMPONENT
APPLICATIONS
• Low Power DC/DC

EIA L ± 0.20 W ± 0.20 (0.008) H ± 0.20 (0.008) W1 ± 0.20 A ± 0.30 (0.012)
Code EIA Code
Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
S Min.
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
N 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
A, B, C, N CASE
476 = 47μF
Rated Voltage Code
Polarity 476 A A = 10V
Band
(Anode+)
xxxxx ID Code
4V G 16V C 35V V
6.3V J 20V D
10V A 25V E
HOW TO ORDER
F93 1A 106 M A 
Type Rated Capacitance Code Tolerance Case Packaging

Voltage pF code: 1st two K = ±10% Size See Tape & Reel
zeros to follow)
Leakage Current After 1 minute’s application of rated voltage, leakage current at 20°C is not more
than 0.01CV or 0.5μA, whichever is greater.
After 1 minute’s application of rated voltage, leakage current at 85°C is not more
than 0.1CV or 5μA, whichever is greater.
After 1 minute’s application of derated voltage, leakage current at 125°C is not more
Capacitance Change By Temperature +15% Max. at +125°C
+10% Max. at +85°C
-10% Max. at -55°C
090121

F93 Series
Capacitance Rated Voltage

μF Code 4V (0G) 6.3V (0J) 10V (1A) 16V (1C) 20V (1D) 25V (1E) 35V (1V)
0.33 334 A
0.47 474 A
0.68 684 A
1.0 105 A A A
1.5 155 A A
2.2 225 A A A A/B
3.3 335 A A A B
4.7 475 A A A/B A/B B/C
6.8 685 A A A/B C
10 106 A A A/B B B/C C
15 156 A A A/B C C N
22 226 A A A/B A(M)/B/C B/C C/N N
33 336 A A A/B B/C C/N N N
47 476 A A/B A/B/C C/N C/N N
68 686 A B B/C C/N
100 107 A/B A/B/C B/C/N C/N N
150 157 B B/C C/N N
220 227 B/C B/C/N C/N N
330 337 C N N
470 477 N N
680 687 N N
Rated ESR @ 100kHz RMS Current (mA) *1

Case Capacitance DCL DF @
Part Number Voltage 100kHz ΔC/C MSL
Size (μF) (μA) 120Hz (%) 25ºC 85ºC 125ºC
(V) (Ω) (%)
4 Volt
F930G226#AA A 22 4 0.9 6 2.5 173 156 69 * 1
F930G336#AA A 33 4 1.3 8 2.5 173 156 69 * 1
F930G476#AA A 47 4 1.9 18 2.5 173 156 69 * 1
F930G686#AA A 68 4 2.7 24 2.5 173 156 69 * 1
F930G107#AA A 100 4 4.0 30 2.0 194 174 77 * 1
F930G107#BA B 100 4 4.0 14 0.9 307 277 123 * 1
F930G157#BA B 150 4 6.0 16 0.7 348 314 139 * 1
F930G227#BA B 220 4 8.8 18 0.7 348 314 139 * 1
F930G227#CC C 220 4 8.8 12 0.7 396 357 159 * 1
F930G337#CC C 330 4 13.2 14 0.7 396 357 159 * 1
F930G477#NC N 470 4 18.8 16 0.3 707 636 283 * 1
F930G687#NC N 680 4 27.2 18 0.3 707 636 283 * 1
6.3 Volt
F930J106#AA A 10 6.3 0.6 6 3.0 158 142 63 * 1
F930J156#AA A 15 6.3 0.9 6 2.9 161 145 64 * 1
F930J226#AA A 22 6.3 1.4 8 2.5 173 156 69 * 1
F930J336#AA A 33 6.3 2.1 8 2.5 173 156 69 * 1
F930J476#AA A 47 6.3 3.0 18 2.5 173 156 69 * 1
F930J476#BA B 47 6.3 3.0 6 1.0 292 262 117 * 1
F930J686#BA B 68 6.3 4.3 8 1.0 292 262 117 * 1
F930J107#AA A 100 6.3 6.3 35 2.0 194 174 77 ±15 1
F930J107#BA B 100 6.3 6.3 14 0.9 307 277 123 * 1
F930J107#CC C 100 6.3 6.3 8 0.7 396 357 159 * 1
F930J157#BA B 150 6.3 9.5 18 0.9 307 277 123 * 1
F930J157#CC C 150 6.3 9.5 12 0.7 396 357 159 * 1
F930J227#BA B 220 6.3 13.9 30 1.2 266 240 106 ±15 3
F930J227#CC C 220 6.3 13.9 14 0.7 396 357 159 * 1
F930J227#NC N 220 6.3 13.9 10 0.5 548 493 219 * 1
F930J337#NC N 330 6.3 20.8 14 0.5 548 493 219 * 1
F930J477#NC N 470 6.3 29.6 16 0.3 707 636 283 * 1
F930J687#NC N 680 6.3 42.8 40 0.3 707 636 283 ±15 3
10 Volt
F931A475#AA A 4.7 10 0.5 6 4.0 137 123 55 * 1
F931A685#AA A 6.8 10 0.7 6 3.5 146 132 59 * 1
F931A106#AA A 10 10 1.0 6 3.0 158 142 63 * 1
F931A156#AA A 15 10 1.5 8 2.9 161 145 64 * 1
F931A226#AA A 22 10 2.2 12 2.5 173 156 69 * 1
012622

F93 Series

(V) (Ω) (%)
F931A226#BA B 22 10 2.2 6 1.9 212 190 85 * 1
F931A336#AA A 33 10 3.3 18 2.5 173 156 69 * 1
F931A336#BA B 33 10 3.3 8 1.4 246 222 99 * 1
F931A476#AA A 47 10 4.7 40 2.0 194 174 77 ±15 1
F931A476#BA B 47 10 4.7 8 1.0 292 262 117 * 1
F931A476#CC C 47 10 4.7 6 0.9 350 315 140 * 1
F931A686#BA B 68 10 6.8 12 0.9 307 277 123 ±15 1
F931A686#CC C 68 10 6.8 8 0.8 371 334 148 * 1
F931A107#BA B 100 10 10.0 18 1.2 266 240 106 ±15 1
F931A107#CC C 100 10 10.0 10 0.7 396 357 159 * 1
F931A107#NC N 100 10 10.0 8 0.6 500 450 200 * 3
F931A157#CC C 150 10 15.0 14 0.7 396 357 159 * 1
F931A157#NC N 150 10 15.0 10 0.6 500 450 200 * 1
F931A227#CC C 220 10 22.0 40 0.9 350 315 140 ±15 1
F931A227#NC N 220 10 22.0 12 0.5 548 493 219 * 3
F931A337#NC N 330 10 33.0 18 0.5 548 493 219 * 1
16 Volt
F931C105#AA A 1 16 0.5 4 7.5 100 90 40 * 1
F931C225#AA A 2.2 16 0.5 4 5.0 122 110 49 * 1
F931C335#AA A 3.3 16 0.5 4 4.5 129 116 52 * 1
F931C475#AA A 4.7 16 0.8 6 4.0 137 123 55 * 1
F931C685#AA A 6.8 16 1.1 6 3.5 146 132 59 * 1
F931C106#AA A 10 16 1.6 6 3.0 158 142 63 * 1
F931C106#BA B 10 16 1.6 6 2.0 206 186 82 * 1
F931C156#AA A 15 16 2.4 10 3.0 158 142 63 * 1
F931C156#BA B 15 16 2.4 6 2.0 206 186 82 * 1
F931C226MAA A 22 16 3.5 15 3.0 158 142 63 ±15 1
F931C226#BA B 22 16 3.5 8 1.9 212 190 85 * 1
F931C226#CC C 22 16 3.5 6 1.1 316 285 126 * 1
F931C336#BA B 33 16 5.3 8 1.9 212 190 85 * 1
F931C336#CC C 33 16 5.3 6 1.1 316 285 126 * 1
F931C476#CC C 47 16 7.5 8 0.9 350 315 140 * 1
F931C476#NC N 47 16 7.5 6 0.7 463 417 185 * 1
F931C686#CC C 68 16 10.9 10 0.8 371 334 148 ±10 1
F931C686#NC N 68 16 10.9 6 0.6 500 450 200 * 1
F931C107#CC C 100 16 16.0 15 0.7 396 357 159 ±10 1
F931C107#NC N 100 16 16.0 10 0.6 500 450 200 * 3
F931C157#NC N 150 16 24.0 15 0.6 500 450 200 * 1
F931C227#NC N 220 16 35.2 25 0.7 463 417 185 ±10 3
20 Volt
F931D225#AA A 2.2 20 0.5 4 5.0 122 110 49 * 1
F931D335#AA A 3.3 20 0.7 4 4.5 129 116 52 * 1
F931D475#AA A 4.7 20 0.9 6 3.0 158 142 63 * 1
F931D475#BA B 4.7 20 0.9 6 2.8 174 157 70 * 1
F931D685#AA A 6.8 20 1.4 6 3.5 146 132 59 * 1
F931D685#BA B 6.8 20 1.4 6 2.5 184 166 74 * 1
F931D106#BA B 10 20 2.0 6 2.1 201 181 80 * 1
F931D156#CC C 15 20 3.0 6 1.2 303 272 121 * 1
F931D226#BA B 22 20 4.4 8 1.9 212 190 85 * 1
F931D226#CC C 22 20 4.4 8 1.1 316 285 126 * 1
F931D336#CC C 33 20 6.6 8 1.1 316 285 126 * 1
F931D336#NC N 33 20 6.6 6 0.7 463 417 185 * 1
F931D476#CC C 47 20 9.4 10 1.1 316 285 126 * 1
F931D476#NC N 47 20 9.4 8 0.7 463 417 185 * 1
F931D107#NC N 100 20 20.0 12 0.5 548 493 219 ±10 3
25 Volt
F931E105#AA A 1 25 0.5 4 7.5 100 90 40 * 1
F931E155#AA A 1.5 25 0.5 4 6.7 106 95 42 * 1
F931E225#AA A 2.2 25 0.6 6 6.3 109 98 44 * 1
F931E335#AA A 3.3 25 0.8 6 6.0 112 101 45 * 1
F931E475#AA A 4.7 25 1.2 8 4.0 137 123 55 * 1
F931E475#BA B 4.7 25 1.2 6 2.8 174 157 70 * 1
F931E106#BA B 10 25 2.5 12 1.9 212 190 85 * 1
F931E106#CC C 10 25 2.5 6 1.5 271 244 108 * 1
F931E156#CC C 15 25 3.8 8 1.2 303 272 121 * 1
F931E226#CC C 22 25 5.5 8 1.1 316 285 126 * 1
F931E226#NC N 22 25 5.5 6 0.7 463 417 185 * 1
F931E336#NC N 33 25 8.3 8 0.7 463 417 185 * 1
F931E476#NC N 47 25 11.8 8 0.7 463 417 185 * 1
F931E226#NC N 22 25 5.5 6 0.7 463 417 185 * 1
F931E336#NC N 33 25 8.3 8 0.7 463 417 185 * 1
F931E476#NC N 47 25 11.8 8 0.7 463 417 185 * 1
011822

F93 Series

(V) (Ω) (%)
35 Volt
F931V334#AA A 0.33 35 0.5 4 12.0 79 71 32 * 1
F931V474#AA A 0.47 35 0.5 4 10.0 87 78 35 * 1
F931V684#AA A 0.68 35 0.5 4 7.6 99 89 40 * 1
F931V105#AA A 1 35 0.5 4 7.5 100 90 40 * 1
F931V155#AA A 1.5 35 0.5 6 7.5 100 90 40 * 1
F931V225#AA A 2.2 35 0.8 6 7.0 104 93 41 * 1
F931V225#BA B 2.2 35 0.8 4 3.8 150 135 60 * 1
F931V335#BA B 3.3 35 1.2 4 3.5 156 140 62 * 1
F931V475#BA B 4.7 35 1.6 8 3.1 166 149 66 * 1
F931V475#CC C 4.7 35 1.6 6 1.8 247 222 99 * 1
F931V685#CC C 6.8 35 2.4 6 1.8 247 222 99 * 1
F931V106#CC C 10 35 3.5 6 1.6 262 236 105 * 1
F931V156#NC N 15 35 5.3 6 0.7 463 417 185 * 1
F931V226#NC N 22 35 7.7 8 0.7 463 417 185 * 1
F931V336#NC N 33 35 11.6 8 0.7 463 417 185 * 1
*1: ΔC/C Marked “*” #: "M" for ±20% tolerance, "K" for ± 10% tolerance.
Item All Case (%)

Damp Heat ±10
Temperature cycles ±5
Resistance soldering heat ±5
Surge ±5
Endurance ±10
QUALIFICATION TABLE

TEST
Condition
Damp Heat Capacitance Change ................... Refer to the table above (*1)
(Steady State) Dissipation Factor . ...................... Initial specified value or less
Leakage Current . ......................... Initial specified value or less
Capacitance Change ................... Refer to the table above (*1)
Temperature Cycles Dissipation Factor . ...................... Initial specified value or less
Resistance to Capacitance Change ................... Refer to the table above (*1)
Soldering Heat Dissipation Factor . ...................... Initial specified value or less
After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF,
for 1000 successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above.
Surge Capacitance Change ................... Refer to the table above (*1)
Dissipation Factor . ...................... Initial specified value or less
After 2000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C, or derated voltage in series
with a 3Ω resistor at 125°C, capacitors shall meet the characteristic requirements in the table above.
Endurance Capacitance Change ....................Refer to the table above (*1)
Dissipation Factor .........................Initial specified value or less
Leakage Current ............................Initial specified value or less
After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which
Shear Test has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its
sign at the terminal electrode.
both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with
Terminal Strength a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be
found no remarkable abnormality on the capacitor terminals.
1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance,
Failure Rate 60% confidence level.
We can supply the type of compliance to AEC-Q200. Please contact to your local KYOCERA AVX sales office when these series are being designed in your
application.
081821

F93 Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

microchip
F92
Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab, undertab
fused
122820

F93-AJ6 Series – Automotive Product Range
F93-AJ6 Series
Resin-Molded Chip - Automotive Product Range
FEATURES
• Compliant to AEC-Q200
COMPONENT
APPLICATIONS
• Cabin Electronics
• Infotainment

EIA L ± 0.20 W ± 0.20 (0.008) H ± 0.20 (0.008) W1 ± 0.20 A ± 0.30 (0.012)
Code EIA Code
Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
S Min.
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
N 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
A, B, C, N CASE
476 = 47μF
Rated Voltage Code
Band
(Anode+)
xxxxx ID Code
4V G 16V C 35V V
6.3V J 20V D
10V A 25V E
HOW TO ORDER
F93 1A 106 M A  AJ6
Type Rated Capacitance Code Tolerance Case Packaging AEC-Q200

Voltage pF code: 1st two K = ±10% Size See Tape & Reel Compliant
multiplier(number of
zeros to follow)
Leakage Current After 1 minute's application of rated voltage, leakage current at 20°C is not more than 0.01CV or 0µA, whichever is greater.
After 1 minute's application of rated voltage, leakage current at 85°C is not more than 0.1CV or 5μA, whichever is greater.
After 1 minute's application of derated voltage, leakage current at 125°C is not more than 0.125CV or 6µA, whichever is greater.
+10% Max. at +85°C
-10% Max. at -55°C
090121

F93-AJ6 Series
μF Code 4V (0G) 6.3V (0J) 10V (1A) 16V (1C) 20V (1D) 25V (1E) 35 V (1V)
1.0 105 A A A
1.5 155 A A
2.2 225 A A A B
3.3 335 A A B
4.7 475 A A A/B A/B B/C
6.8 685 A A A/B C
10 106 A A A/B A/B C C
15 156 A A A/B C C N
22 226 A A A/B B/C B/C C/N N
33 336 A A B B/C C/N N N
47 476 A A/B B/C C/N C/N N
68 686 A B B/C C/N
100 107 A/B B/C C/N C/N
150 157 B C N
220 227 B/C C/N N
330 337 C N
470 477 N N
680 687 N N
Released ratings

Capacitance Rated DCL DF @ 120Hz ESR @ 100kHz RMS Current (mA) *1 ΔC/C
Part Number Case Size MSL
(μF) Voltage (V) (μA) (%) 100kHz (Ω) 25ºC 85ºC 125ºC (%)
4 Volt
F930G226#AAAJ6 A 22 4 0.9 6 2.5 173 156 69 * 3
F930G336#AAAJ6 A 33 4 1.3 8 2.5 173 156 69 * 3
F930G476#AAAJ6 A 47 4 1.9 18 2.5 173 156 69 * 3
F930G686#AAAJ6 A 68 4 2.7 24 2.5 173 156 69 * 3
F930G107#AAAJ6 A 100 4 4 30 2.0 194 174 77 * 3
F930G107#BAAJ6 B 100 4 4 14 0.9 307 277 123 * 3
F930G157#BAAJ6 B 150 4 6 16 0.7 348 314 139 * 3
F930G227#BAAJ6 B 220 4 8.8 18 0.7 348 314 139 * 3
F930G227#CCAJ6 C 220 4 8.8 12 0.7 396 357 159 * 3
F930G337#CCAJ6 C 330 4 13.2 14 0.7 396 357 159 * 3
F930G477#NCAJ6 N 470 4 18.8 16 0.3 707 636 283 * 3
F930G687#NCAJ6 N 680 4 27.2 18 0.3 707 636 283 * 3
6.3 Volt
F930J106#AAAJ6 A 10 6.3 0.6 6 3.0 158 142 63 * 3
F930J156#AAAJ6 A 15 6.3 0.9 6 2.9 161 145 64 * 3
F930J226#AAAJ6 A 22 6.3 1.4 8 2.5 173 156 69 * 3
F930J336#AAAJ6 A 33 6.3 2.1 8 2.5 173 156 69 * 3
F930J476#AAAJ6 A 47 6.3 3 18 2.5 173 156 69 * 3
F930J476#BAAJ6 B 47 6.3 3 6 1.0 292 262 117 * 3
F930J686#BAAJ6 B 68 6.3 4.3 8 1.0 292 262 117 * 3
F930J107#BAAJ6 B 100 6.3 6.3 14 0.9 307 277 123 * 3
F930J107#CCAJ6 C 100 6.3 6.3 8 0.7 396 357 159 * 3
F930J157#CCAJ6 C 150 6.3 9.5 12 0.7 396 357 159 * 3
F930J227#CCAJ6 C 220 6.3 13.9 14 0.7 396 357 159 * 3
F930J227#NCAJ6 N 220 6.3 13.9 10 0.5 548 493 219 * 3
F930J337#NCAJ6 N 330 6.3 20.8 14 0.5 548 493 219 * 3
F930J477#NCAJ6 N 470 6.3 29.6 16 0.3 707 636 283 * 3
F930J687#NCAJ6 N 680 6.3 42.8 40 0.3 707 636 283 ±15 3
10 Volt
F931A475#AAAJ6 A 4.7 10 0.5 6 4.0 137 123 55 * 3
F931A685#AAAJ6 A 6.8 10 0.7 6 3.5 146 132 59 * 3
F931A106#AAAJ6 A 10 10 1 6 3.0 158 142 63 * 3
F931A156#AAAJ6 A 15 10 1.5 8 2.9 161 145 64 * 3
F931A226#AAAJ6 A 22 10 2.2 12 2.5 173 156 69 * 3
F931A226#BAAJ6 B 22 10 2.2 6 1.9 212 190 85 * 3
F931A336#BAAJ6 B 33 10 3.3 8 1.4 246 222 99 * 3
F931A476#BAAJ6 B 47 10 4.7 8 1.0 292 262 117 * 3
F931A476#CCAJ6 C 47 10 4.7 6 0.9 350 315 140 * 3
F931A686#BAAJ6 B 68 10 6.8 12 0.9 307 277 123 ±15 3
F931A686#CCAJ6 C 68 10 6.8 8 0.8 371 334 148 * 3
F931A107#CCAJ6 C 100 10 10 10 0.7 396 357 159 * 3
F931A107#NCAJ6 N 100 10 10 8 0.6 500 450 200 * 3
F931A157#NCAJ6 N 150 10 15 10 0.6 500 450 200 * 3
F931A227#NCAJ6 N 220 10 22 12 0.5 548 493 219 * 3
*#: "M" for ±20% tolerance, "K" for ± 10% tolerance. When you need K tolerance for the part numbers which have M tolerance only, please contact to your local KYOCERA AVX sales office.
012120

F93-AJ6 Series
Capacitance Rated DCL DF @ 120Hz ESR @ 100kHz RMS Current (mA) *1 ΔC/C
(μF) Voltage (V) (μA) (%) 100kHz (Ω) 25ºC 85ºC 125ºC (%)
16 Volt
F931C105#AAAJ6 A 1 16 0.5 4 7.5 100 90 40 * 3
F931C225#AAAJ6 A 2.2 16 0.5 4 5.0 122 110 49 * 3
F931C335#AAAJ6 A 3.3 16 0.5 4 4.5 129 116 52 * 3
F931C475#AAAJ6 A 4.7 16 0.8 6 4.0 137 123 55 * 3
F931C685#AAAJ6 A 6.8 16 1.1 6 3.5 146 132 59 * 3
F931C106#AAAJ6 A 10 16 1.6 6 3.0 158 142 63 * 3
F931C106#BAAJ6 B 10 16 1.6 6 2.0 206 186 82 * 3
F931C156#AAAJ6 A 15 16 2.4 10 3.0 158 142 63 * 3
F931C156#BAAJ6 B 15 16 2.4 6 2.0 206 186 82 * 3
F931C226#BAAJ6 B 22 16 3.5 8 1.9 212 190 85 * 3
F931C226#CCAJ6 C 22 16 3.5 6 1.1 316 285 126 * 3
F931C336#BAAJ6 B 33 16 5.3 8 1.9 212 190 85 * 3
F931C336#CCAJ6 C 33 16 5.3 6 1.1 316 285 126 * 3
F931C476#CCAJ6 C 47 16 7.5 8 0.9 350 315 140 * 3
F931C476#NCAJ6 N 47 16 7.5 6 0.7 463 417 185 * 3
F931C686#CCAJ6 C 68 16 10.9 10 0.8 371 334 148 * 3
F931C686#NCAJ6 N 68 16 10.9 6 0.6 500 450 200 * 3
F931C107#CCAJ6 C 100 16 16 15 0.7 396 357 159 * 3
F931C107#NCAJ6 N 100 16 16 10 0.6 500 450 200 * 3
20 Volt
F931D225#AAAJ6 A 2.2 20 0.5 4 5.0 122 110 49 * 3
F931D335#AAAJ6 A 3.3 20 0.7 4 4.5 129 116 52 * 3
F931D475#AAAJ6 A 4.7 20 0.9 6 3.0 158 142 63 * 3
F931D475#BAAJ6 B 4.7 20 0.9 6 2.8 174 157 70 * 3
F931D685#AAAJ6 A 6.8 20 1.4 6 3.5 146 132 59 * 3
F931D685#BAAJ6 B 6.8 20 1.4 6 2.5 184 166 74 * 3
F931D106#AAAJ6 A 10 20 2 8 3.5 146 132 59 * 3
F931D106#BAAJ6 B 10 20 2 6 2.1 201 181 80 * 3
F931D156#CCAJ6 C 15 20 3 6 1.2 303 272 121 * 3
F931D226#BAAJ6 B 22 20 4.4 8 1.9 212 190 85 * 3
F931D226#CCAJ6 C 22 20 4.4 8 1.1 316 285 126 * 3
F931D336#CCAJ6 C 33 20 6.6 8 1.1 316 285 126 * 3
F931D336#NCAJ6 N 33 20 6.6 6 0.7 463 417 185 * 3
F931D476#CCAJ6 C 47 20 9.4 10 1.1 316 285 126 * 3
F931D476#NCAJ6 N 47 20 9.4 8 0.7 463 417 185 * 3
25 Volt
F931E105#AAAJ6 A 1 25 0.5 4 7.5 100 90 40 * 3
F931E155#AAAJ6 A 1.5 25 0.5 4 6.7 106 95 42 * 3
F931E225#AAAJ6 A 2.2 25 0.6 6 6.3 109 98 44 * 3
F931E475#AAAJ6 A 4.7 25 1.2 8 4.0 137 123 55 * 3
F931E475#BAAJ6 B 4.7 25 1.2 6 2.8 174 157 70 * 3
F931E106#CCAJ6 C 10 25 2.5 6 1.5 271 244 108 * 3
F931E156#CCAJ6 C 15 25 3.8 8 1.2 303 272 121 * 3
F931E226#CCAJ6 C 22 25 5.5 8 1.1 316 285 126 * 3
F931E226#NCAJ6 N 22 25 5.5 6 0.7 463 417 185 * 3
F931E336#NCAJ6 N 33 25 8.3 8 0.7 463 417 185 * 3
F931E476#NCAJ6 N 47 25 11.8 8 0.7 463 417 185 * 3
35 Volt
F931V105#AAAJ6 A 1 35 0.5 4 7.5 100 90 40 * 3
F931V155#AAAJ6 A 1.5 35 0.5 6 7.5 100 90 40 * 3
F931V225#BAAJ6 B 2.2 35 0.8 4 3.8 150 135 60 * 3
F931V335#BAAJ6 B 3.3 35 1.2 4 3.5 156 140 62 * 3
F931V475#BAAJ6 B 4.7 35 1.6 8 3.1 166 149 66 * 3
F931V475#CCAJ6 C 4.7 35 1.6 6 1.8 247 222 99 * 3
F931V685#CCAJ6 C 6.8 35 2.4 6 1.8 247 222 99 * 3
F931V106#CCAJ6 C 10 35 3.5 6 1.6 262 236 105 * 3
F931V156#NCAJ6 N 15 35 5.3 6 0.7 463 417 185 * 3
F931V226#NCAJ6 N 22 35 7.7 8 0.7 463 417 185 * 3
F931V336#NCAJ6 N 33 35 11.6 8 0.7 463 417 185 * 3
*#: "M" for ±20% tolerance, "K" for ± 10% tolerance. When you need K tolerance for the part numbers which have M tolerance only, please contact to your local KYOCERA AVX sales office.
Item All Case (%)

Damp Heat ±10
Surge ±10
Endurance ±10
Load Humidity ±10
022421

F93-AJ6 Series
QUALIFICATION TABLE
TEST
Condition
Damp Heat (Steady State)
After 1000 hour’s application of rated voltage in series with a 33Ω resistor at 85°C, 85% R.H.,
capacitors meet the characteristics requirements table below.
Load Humidity Capacitance Change ................... Refer to the table above (*1)
Leakage Current . ......................... 125% or less than the initial specified value
At -55°C / +125°C, 30 minutes each, 1000 cycles
Temperature Cycles
Resistance to Soldering Heat
After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles
at 85ºC, capacitors shall meet the characteristic requirements in the table above.
Surge Capacitance Change ....................Refer to the table above (*1)
Dissipation Factor .................... Initial specified value or less
Leakage Current ....................... Initial specified value or less
After applying the pressure load of 17.7N for 60 seconds horizontally to the center of capacitor side body which
Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the
opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified
Terminal Strength
jig at the center of the substrate so that substrate may bend by1mm as illustrated. Then, there shall be found no
remarkable abnormality on the capacitor terminals.
Failure Rate
60% confidence level.
032720

F93-AJ6 Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

microchip
F92
Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab, undertab
fused
030321

High CV Resin Molded Solid Tantalum Chip
TLJ Series – J-Lead
TLJ Series
Tantalum Solid Electrolytic Chip Capacitors -
High CV Consumer Series
FEATURES
• High Volumetric Efficiency
• 3x Reflow 260°C Compatible
• 14 Case Sizes Available Including Low Profile Codes
• Environmentally Friendly
• Consumer Applications (e.g. Mobiles Phones, PDA etc.)
• CV Range: 10-1500μF / 2.5-20V
COMPONENT
APPLICATIONS
• Mobile Phones
• MP3/4 Players

EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
MARKING Code
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
S Min.
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
A, B, F, G, H, K, S, T, V, W, Y CASE B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
F 2312 6032-20 6.00 (0.236) 3.20 (0.126) 2.00 (0.079) max. 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
107 = 100µF Rated Voltage G 1206 3216-15 3.20 (0.126) 1.60 (0.063) 1.50 (0.059) max 1.20 0.047) 0.80 (0.031) 1.10 (0.043)
J = 6.3V
H 1210 3528-15 3.50 (0.138) 2.80 (0.110) 1.50 (0.059) max 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
Polarity
Band 107 J LOGO
(Anode+) K 1206 3216-10 3.20 (0.126) 1.60 (0.063) 1.00 (0.039) max 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
XXXXX ID Code
N 0805 2012-10 2.05 (0.081) 1.30 (0.051) 1.00 (0.039) max 1.00 (0.039) 0.50 (0.020) 0.85 (0.033)
1.00±0.10
N, P, R CASE P 0805 2012-15 2.05 (0.081) 1.35 (0.053) 1.50 (0.059) max
(0.039±0.004)
0.50 (0.020) 0.85 (0.033)
Capacitance Value in pF 1.00±0.10
R 0805 2012-12 2.05 (0.081) 1.30 (0.051) 1.20 (0.047) max 0.50 (0.020) 0.85 (0.033)
106 = 10µF (0.039±0.004)
S 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) max 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
106 T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) max 2.20 (0.087) 0.80 (0.031) 1.40 (0.033)
Polarity
J LOGO V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.122) 1.30( 0.051) 4.40 (0.173)
Band
(Anode+) Rated Voltage Code W 2312 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) max 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
J = 6.3V
Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
HOW TO ORDER
TLJ W 157 M 010 R 0200
Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging ESR in mΩ
See table pF code: 1st two M = ±20% 002 = 2.5Vdc = Pure Tin 7" Reel
R
above digits represent 004 = 4Vdc S = Pure Tin 13" Reel
significant figures, 006 = 6.3Vdc
3rd digit represents 010 = 10Vdc
multiplier (number of 016 = 16Vdc
zeros to follow) 020 = 20Vdc
Capacitance Range: 10 μF to 1500 μF
Capacitance Tolerance: ±20%
Rated Voltage (VR) -55°C ≤ +40°C: 2.5 4 6.3 10 16 20
Category Voltage (VC) at 85°C: 1.3 2 3.2 5 8 10
Category Voltage (VC) at 125°C: 0.5 0.8 1.3 2 3.2 4
Temperature Range: -55°C to +125°C with category voltage
Reliability: 0.2% per 1000 hours at 85°C, 0.5xVR with 0.1Ω/V series impedance with
60% confidence level
030321

TLJ Series
Capacitance Rated Voltage DC to 40°C / 0.5DC to 85°C / 0.2DC to 125°C

μF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D)
6.8 685
N(2500)
10 106 S(2200) T(1000)
R(2000,3000)
15 156 R(2000)
K(1800)/N(3800)
22 226 N(5400)/R(3500) T(1000)
R(3800)
K(1500)/N(9600)
N(8000) K(1700)/N(8000)
33 336 P(3500)/R(3500) T(1000)
R(3000) P(3000)/R(3000)
S(1500)
K(1500)/N(8300) A(600)/G(1500)
K(1500)/N(4000)
47 476 P(700,900,1800,2500) P(3200)/R(3200)
P(3000)/R(3000)
R(3200)/S(1500) S(1500)/T(600)
K(1200)/N(8000) A(500)/G(800)
68 686 P(3000)/R(2900) K(2000)/S(1500) A(1500)
S(1500) T(600)
A(500)/G(800) A(500,800)/G(800)
A(1400)/ H(900)
100 107 K(2000)/P(2700) K(2000)/
T(900)
S(1400) P(5400)/T(800)
A(900)/H(900)
150 157 A(800)/T(800) B(500)/W(150,200)
T(1200)
A(1100)/G(3000) B(500)/T(2000)
220 227 T(1100) F(300)
H(900)/T(1100) W(200)
330 337 T(2700)/W(200) F(300)
470 477
680 687 Y(100,150)
1000 108
1500 158 V(100)
Released ratings, (ESR ratings in mOhms in parentheses)

Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply
higher voltage ratings in the same case size, to the same reliability standards.
Voltage vs Temperature Rating
120% rated range

recommended derating
100% 100% 100%
80%
80% 80%
60% 67%
50%
40%
33%
20% 20%
0%
-55°C 0°C 40°C 60°C 85°C 105°C 125°C
020922

TLJ Series
Category Category Maximum ESR 100kHz RMS Current (mA)

Rated Rated DCL
Case Capacitance Voltage Surge Max. @ Product
Part Number Temperature Voltage Temperature Current Max.
Size (μF) 100kHz Category MSL
(V) (ºC) (V) (ºC) (μA) 25ºC 85ºC 125ºC
(A) (mΩ)
2.5 Volt @ 40°C
TLJT227M002#1100 T 220 2.5 40 0.5 125 0.8 5.5 1100 270 243 108 2 3
4 Volt @ 40°C
TLJN336M004#8000 N 33 4 40 0.8 125 0.2 1.3 8000 79 71 32 1 3
TLJR336M004#3000 R 33 4 40 0.8 125 0.6 1.3 3000 135 122 54 2 3
TLJK476M004#1500 K 47 4 40 0.8 125 1.0 1.9 1500 208 187 83 2 3
TLJN476M004#4000 N 47 4 40 0.8 125 0.6 1.9 4000 112 101 45 1 3
TLJP476M004#3000 P 47 4 40 0.8 125 0.6 1.9 3000 141 127 57 2 3
TLJR476M004#3000 R 47 4 40 0.8 125 0.6 1.9 3000 135 122 54 2 3
TLJK686M004#1200 K 68 4 40 0.8 125 1.2 2.7 1200 233 209 93 2 3
TLJN686M004#8000 N 68 4 40 0.8 125 0.2 5.4 8000 79 71 32 1 3
TLJP686M004#3000 P 68 4 40 0.8 125 0.6 2.7 3000 141 127 57 2 3
TLJR686M004#2900 R 68 4 40 0.8 125 0.6 2.7 2900 138 124 55 2 3
TLJS686M004#1500 S 68 4 40 0.8 125 1.0 2.7 1500 208 187 83 2 3
TLJA107M004#0500 A 100 4 40 0.8 125 2.1 4.0 500 387 349 155 1 3
TLJG107M004#0800 G 100 4 40 0.8 125 1.6 4.0 800 296 266 118 2 3
TLJK107M004#2000 K 100 4 40 0.8 125 0.8 8.0 2000 180 162 72 2 3
TLJP107M004#2700 P 100 4 40 0.8 125 0.6 8.0 2700 149 134 60 2 3
TLJS107M004#1400 S 100 4 40 0.8 125 1.1 4.0 1400 215 194 86 2 3
TLJA157M004#0800 A 150 4 40 0.8 125 1.6 6.0 800 306 276 122 2 3
TLJT157M004#0800 T 150 4 40 0.8 125 1.6 6.0 800 316 285 126 2 3
TLJA227M004#1100 A 220 4 40 0.8 125 1.3 17.6 1100 261 235 104 2 3
TLJG227M004#3000 G 220 4 40 0.8 125 0.6 17.6 3000 153 137 61 2 3
TLJH227M004#0900 H 220 4 40 0.8 125 1.5 8.8 900 298 268 119 2 3
TLJT227M004#1100 T 220 4 40 0.8 125 1.3 8.8 1100 270 243 108 2 3
TLJT337M004#2700 T 330 4 40 0.8 125 0.6 26.4 2700 172 155 69 2 3
TLJW337M004#0200 W 330 4 40 0.8 125 3.1 13.2 200 671 604 268 1 3
6.3 Volt @ 40°C
TLJN226M006#5400 N 22 6.3 40 1.3 125 0.5 1.3 5400 96 87 38 1 3
TLJR226M006#3500 R 22 6.3 40 1.3 125 0.8 1.3 3500 125 113 50 2 3
TLJK336M006#1700 K 33 6.3 40 1.3 125 1.5 2.0 1700 196 176 78 2 3
TLJN336M006#8000 N 33 6.3 40 1.3 125 0.4 2.0 8000 79 71 32 1 3
TLJP336M006#3000 P 33 6.3 40 1.3 125 0.9 2.0 3000 141 127 57 1 3
TLJR336M006#3000 R 33 6.3 40 1.3 125 0.9 2.0 3000 135 122 54 2 3
TLJK476M006#1500 K 47 6.3 40 1.3 125 1.6 2.8 1500 208 187 83 2 3
TLJN476M006#8300 N 47 6.3 40 1.3 125 0.4 5.6 8300 78 70 31 1 3
TLJP476M006#0700 P 47 6.3 40 1.3 125 2.7 2.8 700 293 263 117 2 3
TLJP476M006#0900 P 47 6.3 40 1.3 125 2.3 2.8 900 258 232 103 2 3
TLJP476M006#1800 P 47 6.3 40 1.3 125 1.4 2.8 1800 183 164 73 2 3
TLJP476M006#2500 P 47 6.3 40 1.3 125 1.1 2.8 2500 155 139 62 2 3
TLJR476M006#3200 R 47 6.3 40 1.3 125 0.9 2.8 3200 131 118 52 2 3
TLJS476M006#1500 S 47 6.3 40 1.3 125 1.6 2.8 1500 208 187 83 2 3
TLJA686M006#0500 A 68 6.3 40 1.3 125 3.3 4.1 500 387 349 155 1 3
TLJG686M006#0800 G 68 6.3 40 1.3 125 2.5 4.1 800 296 266 118 2 3
TLJK686M006#2000 K 68 6.3 40 1.3 125 1.3 8.16 2000 180 162 72 2 3
TLJS686M006#1500 S 68 6.3 40 1.3 125 1.6 4.1 1500 208 187 83 2 3
TLJT686M006#0600 T 68 6.3 40 1.3 125 3.0 4.1 600 365 329 146 1 3
TLJA107M006#0500 A 100 6.3 40 1.3 125 3.3 6.0 500 387 349 155 2 3
TLJA107M006#0800 A 100 6.3 40 1.3 125 2.5 6.0 800 306 276 122 2 3
TLJG107M006#0800 G 100 6.3 40 1.3 125 2.5 6.0 800 296 266 118 2 3
TLJK107M006#2000 K 100 6.3 40 1.3 125 1.3 12.0 2000 180 162 72 2 3
TLJP107M006#5400 P 100 6.3 40 1.3 125 0.5 12.0 5400 105 95 42 2 3
TLJT107M006#0800 T 100 6.3 40 1.3 125 2.5 6.0 800 316 285 126 2 3
TLJA157M006#0900 A 150 6.3 40 1.3 125 2.3 9.0 900 289 260 115 2 3
TLJH157M006#0900 H 150 6.3 40 1.3 125 2.3 9.0 900 298 268 119 2 3
TLJT157M006#1200 T 150 6.3 40 1.3 125 1.9 9.0 1200 258 232 103 2 3
TLJB227M006#0500 B 220 6.3 40 1.3 125 3.3 13.2 500 412 371 165 1 3
TLJT227M006#2000 T 220 6.3 40 1.3 125 1.3 26.4 2000 200 180 80 2 3
TLJW227M006#0200 W 220 6.3 40 1.3 125 4.8 13.2 200 671 604 268 1 3
TLJF337M006#0300 F 330 6.3 40 1.3 125 4.2 19.8 300 577 520 231 1 3
TLJY687M006#0100 Y 680 6.3 40 1.3 125 5.7 40.8 100 1118 1006 447 1 3
TLJY687M006#0150 Y 680 6.3 40 1.3 125 5.3 40.8 150 913 822 365 1 3
TLJV158M006#0100 V 1500 6.3 40 1.3 125 5.7 90 100 1581 1423 632 1 3
021622

TLJ Series
ESR 100kHz RMS Current
Rated Rated Category Category Maximum DCL Max. (mA)
Case Capacitance Voltage Surge Product
Part Number Temperature Voltage Temperature Current Max. @
Size (μF) Category MSL
(V) (ºC) (V) (ºC) (μA) 100kHz 25ºC 85ºC 125ºC
(A) (mΩ)
10 Volt @ 40°C
TLJN106M010#2500 N 10 10 40 2 125 1.7 1.0 2500 141 127 57 1 3
TLJR106M010#2000 R 10 10 40 2 125 2.0 1.0 2000 166 149 66 1 3
TLJR106M010#3000 R 10 10 40 2 125 1.4 1.0 3000 135 122 54 1 3
TLJR156M010#2000 R 15 10 40 2 125 2.0 1.5 2000 166 149 66 1 3
TLJK226M010#1800 K 22 10 40 2 125 2.2 2.2 1800 167 150 67 2 3
TLJN226M010#3800 N 22 10 40 2 125 1.2 2.2 3800 115 103 46 1 3
TLJR226M010#3800 R 22 10 40 2 125 1.2 2.2 3800 120 108 48 2 3
TLJK336M010#1500 K 33 10 40 2 125 2.6 3.3 1500 208 187 83 2 3
TLJN336M010#9600 N 33 10 40 2 125 0.5 6.6 9600 72 65 29 1 3
TLJP336M010#3500 P 33 10 40 2 125 1.3 3.3 3500 131 118 52 2 3
TLJR336M010#3500 R 33 10 40 2 125 1.3 3.3 3500 125 113 50 2 3
TLJS336M010#1500 S 33 10 40 2 125 2.6 3.3 1500 208 187 83 2 3
TLJA476M010#0600 A 47 10 40 2 125 4.8 4.7 600 354 318 141 1 3
TLJG476M010#1500 G 47 10 40 2 125 2.6 4.7 1500 216 194 86 2 3
TLJP476M010#3200 P 47 10 40 2 125 1.4 4.7 3200 137 123 55 2 3
TLJR476M010#3200 R 47 10 40 2 125 1.4 9.4 3200 131 118 52 2 3
TLJS476M010#1500 S 47 10 40 2 125 2.6 4.7 1500 208 187 83 2 3
TLJT476M010#0600 T 47 10 40 2 125 4.8 4.7 600 365 329 146 1 3
TLJA686M010#1500 A 68 10 40 2 125 2.6 6.8 1500 224 201 89 2 3
TLJA107M010#1400 A 100 10 40 2 125 2.7 10.0 1400 231 208 93 2 3
TLJH107M010#0900 H 100 10 40 2 125 3.7 10.0 900 298 268 119 2 3
TLJT107M010#0900 T 100 10 40 2 125 3.7 10.0 900 298 268 119 2 3
TLJB157M010#0500 B 150 10 40 2 125 5.3 15.0 500 412 371 165 1 3
TLJW157M010#0150 W 150 10 40 2 125 8.3 15.0 150 775 697 310 1 3
TLJW157M010#0200 W 150 10 40 2 125 7.7 15.0 200 671 604 268 1 3
TLJF227M010#0300 F 220 10 40 2 125 6.7 22.0 300 577 520 231 1 3
16 Volt @ 40°C
TLJS106M016#2200 S 10 16 40 3.2 125 3.0 1.6 2200 172 155 69 1 3
TLJT226M016#1000 T 22 16 40 3.2 125 5.5 3.5 1000 283 255 113 1 3
TLJT336M016#1000 T 33 16 40 3.2 125 5.5 5.3 1000 283 255 113 1 3
20 Volt @ 40°C
TLJT106M020#1000 T 10 20 40 4 125 6.9 2.0 1000 283 255 113 1 3

All technical data relates to an ambient temperature of +25°C. Capacitance is measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is
measured at rated voltage after 5 minutes.
ESR allowed to move up to 1.25 times catalogue limit post mounting
DCL allowed to move up to 2.00 times catalogue limit post mounting
081821

TLJ Series
QUALIFICATION TABLE – CATEGORY 1
TLJ series (Temperature range -55ºC to +125ºC)
TEST
Apply rated voltage (Ur) at 40ºC and / or category Visual examination no visible damage
voltage (Uc) at 85ºC for 2000 hours through a circuit DCL 2 x initial limit
Endurance
impedance of ≤0.1Ω/V. Stabilize at room temperature ΔC/C within ±10% of initial value
for 1-2 hours before measuring. ESR 1.25 x initial limit
Store at 65ºC and 90-95% relative humidity for 500 Visual examination no visible damage
hours, with no applied voltage. Stabilize at room DCL 2 x initial limit
Humidity
temperature and humidity for 1-2 hours before ΔC/C within ±10% of initial value
measuring. ESR 1.25 x initial limit
1 +20 15
2 -55 15 DCL 2 x IL* n/a 2 x IL* 20 x IL* 25 x IL* IL*
Stability 4 +85 15 ΔC/C n/a +0/-20% ±5% +20/-0% +25/-0% ±5%
5 +125 15
6 +20 15 ESR 1.25 xIL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL*
Apply 1.3x rated voltage (Ur) at 40ºC for 1000 cycles Visual examination no visible damage
Surge of duration 6 min (30 sec charge, 5 min 30 sec DCL 2 x initial limit
Voltage discharge) through a charge / discharge resistance ΔC/C within ±5% of initial value
of 1000Ω ESR 1.25 x initial limit
Mechanical DCL initial limit
MIL-STD-202, Method 213, Condition C
Shock ΔC/C within ±5% of initial value
ESR initial limit
DCL initial limit
Vibration MIL-STD-202, Method 204, Condition D
ESR initial limit
*Initial Limit

TLJ series (Temperature range -55ºC to +125ºC)
TEST
Endurance
impedance of ≤0.1Ω/V. Stabilize at room temperature ΔC/C within +5/-30% of initial value
Humidity
1 +20 15
2 -55 15 DCL 2 x IL* n/a 2 x IL* 20 x IL* 25 x IL* 2 x IL*
Stability 4 +85 15 ΔC/C n/a +5/-20% ±10% +20/-0% +25/-0% ±10%
5 +125 15
6 +20 15 ESR 1.25 xIL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL*
Mechanical DCL initial limit
MIL-STD-202, Method 213, Condition C
Shock ΔC/C within ±5% of initial value
ESR initial limit
DCL initial limit
Vibration MIL-STD-202, Method 204, Condition D
ESR initial limit
*Initial Limit
060920

TLJ Series
SERIES LINE UP : CONVENTIONAL SMD MnO2
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

microchip
F92
Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab, undertab
fused
030321

TLN Series – Undertab
TLN Series
Tantalum Solid Electrolytic Chip Capacitors - Undertab Series
FEATURES
• Undertab Terminations Layout:
- High Volumetric Efficiency
- High PCB Assembly Density
- High Capacitance in Smaller Dimensions LEAD-FREE COMPATIBLE
• 3x Reflow 260°C Compatible COMPONENT
• Consumer Applications (e.g. PCMCIA/USB
Wireless Express Cards, Mobiles, MP3 etc.)
• CV Range: 47-220μF / 4-10V
APPLICATIONS
• Mobile Phones
• Tablets
• MP3/4 Players

EIA EIA L±0.20 W+0.20 (0.008) WP±0.10 WN±0.10 AP±0.10 AN±0.10
Code H max. S Min.
Code Metric (0.008) -0.10 (0.004) (0.004) (0.004) (0.004) (0.004)
M 0805 2012-09 2.05 (0.081) 1.30 (0.051) 0.90 (0.035) 1.00 (0.039) 1.00 (0.039) 0.85 (0.033) 0.85 (0.033) 0.40 (0.016)
N 0805 2012-10 2.05 (0.081) 1.30 (0.051) 1.00 (0.039) 1.00 (0.039) 1.00 (0.039) 0.85 (0.033) 0.85 (0.033) 0.40 (0.016)
T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039)
MARKING
T, CASE M, N CASE Polarity Band (Anode+)
Capacitance Value in pF W L W
106 = 10µF
107 = 100µF Rated Voltage
J = 6.3V
Polarity
10 7 J LOGO 106 H
Band
(Anode+)
XXXXX ID Code Polarity
J LOGO
Band
WP AP S AN WN
(Anode+) Rated Voltage Code
J = 6.3V
HOW TO ORDER
TLN N 107 M 004 R 5200
See table pF code: 1st two digits M = ±20% 004 = 4Vdc R = Pure Tin 7" Reel
above represent significant 006 = 6.3Vdc S = Pure Tin 13" Reel
figures, 3rd digit represents 010 = 10Vdc
multiplier (number of zeros
to follow)
Rated Voltage (VR) -55°C ≤ +40°C: 4 6.3 10
Category Voltage (VC) at 85°C: 2 3.2 5
Category Voltage (VC) at 125°C: 0.8 1.3 2
031722

TLN Series
Capacitance Rated Voltage DC to 40°C / 0.5DC to 85°C/ 0.2DC to 125°C

μF Code 4V (G) 6.3V (J) 10V (A)
47 476 M(6000)/N(6000)
100 107 N(5200)
150 157 T(1500)
220 227 T(1500) T(1500) T(1300)
standards.

100kHz RMS Current (mA)
Category Category Maximum ESR
Rated Rated DCL
Case Capacitance Voltage Surge Max.
Part Number Temperature Voltage Temperature Current Max. MSL
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) 25ºC 85ºC 125ºC
(A) (mΩ)
4 Volt @ 40°C
TLNN107M004#5200 N 100 4 40 0.8 125 0.4 20 5200 88 79 35 3
TLNT227M004#1500 T 220 4 40 0.8 125 1.0 17.6 1500 216 194 86 3
6.3 Volt @ 40°C
TLNT227M006#1500 T 220 6.3 40 1.3 125 1.6 26.4 1500 216 194 86 3
10 Volt @ 40°C
TLNM476M010#6000 M 47 10 40 2 125 0.8 9.4 6000 82 73 33 3
TLNN476M010#6000 N 47 10 40 2 125 0.8 9.4 6000 82 73 33 3
TLNT157M010#1500 T 150 10 40 2 125 2.6 30 1500 216 194 86 3
TLNT227M010#1300 T 220 10 40 2 125 2.9 44 1300 232 209 93 3

All technical data relates to an ambient temperature of +25°C. Capacitance is measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
031722

TLN Series
QUALIFICATION TABLE
TLN series (Temperature range -55ºC to +125ºC)

TEST
voltage (Uc) at 85ºC for 2000 hours through a DCL 2 x initial limit
Endurance
circuit impedance of ≤0.1Ω/V. Stabilize at room ΔC/C within +5/-30% of initial value
temperature for 1-2 hours before measuring. ESR 1.25 x initial limit
Humidity
1 +20 15
Stability 4 +85 15 ΔC/C n/a +5/-20% ±10% +20/-0% +25/-0% ±10%
5 +125 15
6 +20 15 ESR 1.25 x IL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25xIL*
DCL initial limit
Mechanical
MIL-STD-202, Method 213, Condition C ΔC/C within ±5% of initial value
Shock
DF initial limit
ESR initial limit
DCL initial limit
DF initial limit
ESR initial limit
*Initial Limit
120% rated range

100% 100% 100%
80%
80% 80%
60% 67%
50%
40%
33%
20% 20%
0%
-55°C 0°C 40°C 60°C 85°C 105°C 125°C
040120

TLN Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93
Standard TAJ TAC TPC F92

Low Profile microchip microchip
Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab, undertab
fused
030321

TLN PulseCap™ Series – High Capacitance - Undertab
TLN PulseCap™ Series
High Capacitance Tantalum Solid Electrolytic Chip Capacitors
Undertab Series
FEATURES
• Large Case Size for Maximum Capacitance
• Low Profile Solution
• Consumer Applications
(e.g. PCMCIA/USB Wireless Express Cards etc.) COMPONENT
• CV Range: 1000-3300μF / 4-10V
APPLICATIONS
• Data Transfer Modems
• SSD Backup Circuits

Code H max. S Min.
Code Metric (0.008) -0.10 (0.004) (0.004) (0.004) (0.004) (0.004)
4 2924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083)
6 5831 14878-20 14.80 (0.583) 7.80 (0.307) 2.00 (0.079) 5.50 (0.217) 5.50 (0.217) 2.45 (0.096) 2.45 (0.096) 9.90 (0.390)
MARKING
4, 6 CASE
Capacitance Value in mF Polarity Band (Anode+)
228 = 2.2mF Rated Voltage
J = 6.3V
W L W
Polarity
Band
228 J LOGO H
(Anode+)
XXXXX ID Code WP AP S AN WN
HOW TO ORDER
TLN 6 228 M 006 R 0055
See table pF code: 1st two digits M = ±20% 004 = 4Vdc R = Pure Tin 7" Reel
above represent significant 006 = 6.3Vdc
figures, 3rd digit represents 010 = 10Vdc
multiplier
Leakage Current DCL: 0.01CV
Category Voltage (VC) at 125°C: 0.8 1.3 2
Reliability: 0.2% per 1000 hours at 85°C, 0.5xVR with 0.1Ω/V series impedance with 60%
confidence level
102020

Undertab Series
Capacitance Voltage Rating DC (VR) to 85°C

μF Code 4V (G) 6.3V (J) 10V (A)
680 687
1000 108 4(100)/6(55)
1500 158 4(100) 6(55)
2200 228 6(55)
3300 338 6(55)
Released ratings (ESR ratings in mOhms in parentheses)


ESR
Rated Rated Category Category DCL 100kHz RMS Current (mA)
Part Number Voltage Temperature Voltage Temperature Max. MSL
Size (μF) @ 100kHz 25ºC 85ºC 125ºC
(V) (ºC) (V) (ºC) (μA)
(mΩ)
4 Volt @ 40°C
TLN6338M004#0055 6 3300 4 40 0.8 125 132 55 2045 1840 818 3
6.3 Volt @ 40°C
TLN4158M006#0100 4 1500 6.3 40 1.3 125 90 100 1285 1156 514 3
TLN6228M006#0055 6 2200 6.3 40 1.3 125 132 55 2045 1840 818 3
10 Volt @ 40°C
TLN4108M010#0100 4 1000 10 40 2 125 100 100 1285 1156 514 3
TLN6108M010#0055 6 1000 10 40 2 125 100 55 2045 1840 818 3
TLN6158M010#0055 6 1500 10 40 2 125 150 55 2045 1840 818 3

081821

Undertab Series
QUALIFICATION TABLE
TLN PulseCap™ series (Temperature range -55ºC to +125ºC)
TEST
Endurance impedance of ≤0.1Ω/V. Stabilize at room temperature ΔC/C within +5/-30% of initial value
Humidity temperature and humidity for 1-2 hours before ΔC/C within ±10% of initial value
+20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
1 +20 15
Stability 4 +85 15 ΔC/C n/a +5/-20% ±10% +20/-0% +25/-0% ±10%
5 +125 15
6 +20 15 ESR 1.25 x IL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25xIL*
Apply 1.3x rated voltage (Ur) at 40ºCfor 1000 cycles Visual examination no visible damage
DCL initial limit
Mechanical MIL-STD-202, Method 213, Condition C ΔC/C within ±5% of initial value
Shock
DF initial limit
ESR initial limit
DCL initial limit
DF initial limit
ESR initial limit
*Initial Limit
120% rated range

100% 100% 100%
80%
80% 80%
60% 67%
50%
40%
33%
20% 20%
0%
-55°C 0°C 40°C 60°C 85°C 105°C 125°C
040120

Undertab Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab, undertab
fused
030321

F98 Series – Undertab
F98 Series
Resin-Molded Chip, High CV Undertab
FEATURES
• SMD Face Down Design
• Small and Low Profile
• 100% Surge Current Tested COMPONENT
APPLICATIONS
• Smartphone
• Mobile Phone
• Wireless Module
• Hearing Aid

Code EIA Code EIA Metric L W1 W2 H S1 S2
+0.20 +0.20
1.60 -0.10 0.85 -0.10 0.65±0.10 0.80±0.10*3 0.50±0.10 0.60±0.10
M 0603 1608-09
(0.063 +0.008
-0.004 ) (0.033 +0.008
-0.004 ) (0.026±0.004) (0.031±0.004) (0.020±0.004) (0.024±0.004)
+0.20 +0.20
2.00 -0.10 1.25 -0.10 0.90±0.10 0.80±0.10 0.50±0.10 1.00±0.10
S 0805 2012-09
(0.079 +0.008
-0.004 ) (0.049 +0.008
-0.004 ) (0.035±0.004) (0.031±0.004) (0.020±0.004) (0.039±0.004)
1.10±0.05 0.60±0.05 0.35±0.05 0.55±0.05 0.30±0.05 0.50±0.05

U 0402 1106-06
(0.043±0.002) (0.024±0.002) (0.014±0.002) (0.022±0.002) (0.012±0.002) (0.020±0.002)
*3 F980J107MMAAXE: 1.0mm Max.
L W1
MARKING
H
U CASE M CASE S CASE
*Capacitance
Code
W2 J Js
S1 S2 S1 Rated Voltage Rated Voltage

Code Code
HOW TO ORDER
F98 0J 106 M M  
Type Rated Capacitance Code Tolerance Case Packaging Specification Suffix

Voltage pF code: 1st two digits M = ±20% Size See Tape & Reel LZT = Rated temperature 60ºC
represent significant figures, See Packaging Section AXE = Rated temperature 60ºC and
3rd digit represents multiplier table H dimension 1.0mm Max
(number of zeros to follow) above AH1 = Low ESR
Category Temperature Range: -55 to +125°C
Rated Temperature: +85°C or +60°C
Capacitance Tolerance: ±20% at 120Hz
Dissipation Factor: Refer to next page
ESR 100kHz: Refer to next page
Refer to next page
Provided that:
After 5 minute’s application of rated voltage, leakage current at 85°C or +60°C
Leakage Current:
10 times or less than 20ºC specified value.
After 5 minute’s application of rated voltage, leakage current at 125°C
12.5 times or less than 20ºC specified value.
Termination Finish: M, S case: Gold Plating (standard), U case: Sn Plating (standard)
011822

F98 Series
CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE)
*Cap Code
μF Code 2.5 (0e) 4V (0G) 6.3V (0J) 10V (1A) 16V (1C) 20V (1D) 25V (1E) 35V (1V)
0.47 474 U N
1.0 105 M M M S A
2.2 225 M/U M J
4.7 475 U M/U M/U** M S
10 106 U M/U** M S a
15 156 U e
22 226 M/U** M M**/S j
33 336 M M M**/S n
47 476 M M M/S/S(AH1) S s
68 686 M/S w
100 107 M/M(AH1)/S M*4/S A
150 157 M*
220 227 S* S J
Released ratings
*4 (AXE) Rated temperature 60ºC and H dimension 1.0mm Max. Please contact KYOCERA AVX when you need detail spec.
** (LZT) Rated temperature 60ºC. Please contact KYOCERA AVX when you need detail spec.
*Codes under development - subject to change.

Rated DF@ ESR@ 100kHz RMS Current (mA) *1
Case Capacitance DCL
Part Number Voltage 120Hz 100kHz ΔC/C MSL
Size (μF) (μA) 25ºC 60ºC 85ºC 125ºC
(V) (%) (Ω) (%)
2.5 Volt
F980E476MMA M 47 2.5 1.2 30 4 79 – 71 32 ±30 3
4 Volt
F980G475MUA U 4.7 4 0.5 20 20 27 – 25 11 ±30 3
F980G106MUA U 10 4 0.8 25 20 27 – 25 11 ±30 3
F980G156MUA U 15 4 9.0 40 25 24 – 22 10 ±30 3
F980G226MMA M 22 4 0.9 15 7.5 58 – 52 23 ±30 3
F980G226MUALZT U 22 4 25.0 40 20 27 25 – 11 ±30 3
F980G336MMA M 33 4 1.3 30 4 79 – 71 32 ±30 3
F980G476MMA M 47 4 1.9 40 8 56 – 50 22 ±30 3
F980G686MMA M 68 4 27.2 50 10 50 – 45 20 ±30 3
F980G686MSA S 68 4 2.7 30 4 106 – 95 42 ±30 3
F980G107MMA M 100 4 80.0 60 10 50 – 45 20 ±30 3
F980G107MMAAH1 M 100 4 80.0 60 2 112 – 101 45 ±30 3
F980G107MSA S 100 4 4.0 35 4 106 – 95 42 ±30 3
F980G227MSA S 220 4 132 80 5 95 – 85 38 ±30 3
6.3 Volt
F980J475MMA M 4.7 6.3 0.5 20 7.5 58 – 52 23 ±30 3
F980J475MUA U 4.7 6.3 0.6 20 20 27 – 25 11 ±30 3
F980J106MMA M 10 6.3 0.6 8 6 65 – 58 26 ±30 3
F980J106MUALZT U 10 6.3 6.3 30 30 22 20 – 9 ±30 3
F980J226MMA M 22 6.3 1.4 20 6 65 – 58 26 ±30 3
F980J336MMA M 33 6.3 4.2 35 8 56 – 50 22 ±30 3
F980J476MMA M 47 6.3 29.6 45 10 50 – 45 20 ±30 3
F980J476MSA S 47 6.3 3.0 25 6 87 – 78 35 ±30 3
F980J476MSAAH1 S 47 6.3 3.0 25 1 212 – 191 85 ±30 3
F980J107MMAAXE M 100 6.3 126 80 10 50 45 – 20 ±30 3
F980J107MSA S 100 6.3 63.0 50 8 75 – 68 30 ±30 3
10 Volt
F981A225MMA M 2.2 10 0.5 6 7.5 58 – 52 23 ±30 3
F981A225MUA U 2.2 10 0.5 15 15 32 – 28 13 ±30 3
F981A475MMA M 4.7 10 0.5 6 6 65 – 58 26 ±30 3
F981A475MUALZT U 4.7 10 4.7 25 25 24 22 – 10 ±30 3
F981A106MMA M 10 10 1.0 20 7.5 58 – 52 23 ±30 3
F981A226MMALZT M 22 10 11.0 30 8 56 50 – 22 ±30 3
F981A226MSA S 22 10 2.2 20 4 106 – 95 42 ±30 3
F981A336MMALZT M 33 10 33.0 45 8 56 50 – 22 ±30 3
F981A336MSA S 33 10 3.3 30 6 87 – 78 35 ±30 3
F981A476MSA S 47 10 9.4 35 5 95 – 85 38 ±30 3
16 Volt
F981C474MUA U 0.47 16 0.5 6 25 24 – 22 10 ±20 3
F981C105MMA M 1 16 0.5 6 10 50 – 45 20 ±30 3
F981C225MMA M 2.2 16 0.5 6 10 50 – 45 20 ±30 3
F981C475MMA M 4.7 16 0.8 12 12 46 – 41 18 ±30 3
F981C106MSA S 10 16 1.6 18 4 106 – 95 42 ±30 3
20 Volt
F981D105MMA M 1 20 0.5 6 10 50 – 45 20 ±30 3
25 Volt
F981E105MMA M 1 25 0.5 8 10 50 – 45 20 ±30 3
35 Volt
F981V105MSA S 1 35 0.7 20 8 75 – 68 30 ±30 3
*2: Leakage Current Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
After 5 minute’s application of rated voltage, leakage current at 20ºC.
041122

F98 Series
QUALIFICATION TABLE

TEST
Condition
Damp Heat Capacitance Change ............ Refer to the table above (*1)
(Steady State) Dissipation Factor . ............... 150% or less of initial specified value
Leakage Current . .................. 200% or less of initial specified value
Capacitance Change ............ Refer to the table above (*1)
Temperature Cycles Dissipation Factor . ............... 150% or less of initial specified value
Resistance to Capacitance Change ............ Refer to the table above (*1)
Soldering Heat Dissipation Factor . ............... Initial specified value or less
Leakage Current . .................. Initial specified value or less
After application of surge in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF,
(Not applied to LZT and AXE.)
Surge Capacitance Change ............ Refer to the table above (*1)
Dissipation Factor . ............... 150% or less of initial specified value
After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C or +60°C,
capacitors shall meet the characteristic requirements in the table above.
Endurance Capacitance Change .............Refer to the table above (*1)
Dissipation Factor ..................150% or less of initial specified value
Leakage Current .....................200% or less of initial specified value
After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side
Shear Test body which has no electrode and has been soldered beforehand on a substrate, there shall be found
neither exfoliation nor its sign at the terminal electrode.
081921

F98 Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

F98-AS1 Series – Fused Tantalum Chip - Undertab
F98-AS1 Series
Fused Face-Down, High CV
FEATURES
APPLICATIONS
• Smartphone
• Mobile Phone
• Wireless Module
• Hearing Aid

+0.20 +0.20
2.00 -0.10 1.25 -0.10 0.90±0.10 0.80±0.10 0.50±0.10 1.00±0.10
S 0805 2012-09
(0.079 +0.008
-0.004 ) (0.049 +0.008
-0.004 ) (0.035±0.004) (0.031±0.004) (0.020±0.004) (0.039±0.004)
L W1 MARKING
H S CASE
An *Capacitance
W2 Code
S1 S2 S1
Rated Voltage
Code
HOW TO ORDER
F98 1A 336 M S  AS1
Type Rated Capacitance Tolerance Case Packaging Fuse Series

Voltage Code M = ±20% Size Code
pF code: 1st two digits See Reel Dia Tape Width
represent significant figures, table (φ180) (mm)
3rd digit represents multiplier above A 8
(number of zeros to follow)
Rated Temperature: +85°C
Refer to next page
Provided that:
Leakage Current:
Termination Finish: Gold Plating (standard)
102020

F98-AS1 Series
*Cap Code
μF Code 10V (1A) 16V (1C) 20V (1D) 25V (1E) 35 (1V)
1.0 105 S A
2.2 225 J
4.7 475 S
10 106 S a
22 226 S j
33 336 S n
47 476 S s
Released ratings

Rated DF ESR 100kHz RMS Current (mA) *1
Part Number Voltage @ 120Hz @ 100kHz ΔC/C MSL
Size (μF) (μA) 25ºC 85ºC 125ºC
(V) (%) (Ω) (%)
10 Volt
F981A226MSAAS1 S 22 10 2.2 20 4.5 100 90 40 ±20 3
F981A336MSAAS1 S 33 10 3.3 30 6.5 83 75 33 ±30 3
F981A476MSAAS1 S 47 10 9.4 35 5.5 90 81 36 ±30 3
16 Volt
F981C106MSAAS1 S 10 16 1.6 18 4.5 100 90 40 ±20 3
35 Volt
F981V105MSAAS1 S 1 35 0.7 20 8.5 73 65 29 ±30 3
*2: Leakage Current Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
After 5 minute’s application of rated voltage, leakage current at 20ºC.
QUALIFICATION TABLE
F98-AS1 series (Temperature range -55ºC to +125ºC)
TEST
Condition
Damp Heat Capacitance Change ............ Refer to the table above (*1)
(Steady State) Dissipation Factor . ............... 150% or less of initial specified value
Capacitance Change ............ Refer to the table above (*1)
Temperature Cycles Dissipation Factor . ............... 150% or less of initial specified value
Resistance to Capacitance Change ............ Refer to the table above (*1)
After application of surge in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF,
Surge Capacitance Change ............ Refer the table above (*1)
Dissipation Factor . ............... 150% or less of initial specified value
After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C,
Endurance Capacitance Change .............Refer to the table above (*1)
Dissipation Factor ..................150% or less of initial specified value
Leakage Current .....................200% or less of initial specified value
After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side
Shear Test bodywhich has no electrode and has been soldered beforehand on a substrate, there shall be found
neither exfoliation nor its sign at the terminal electrode.
Fuse Activation 5 seconds max. with 2A min. applied current
063021

F98-AS1 Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

F98-AJ6 Series – Resin-Molded Chip, High CV Facedown -
Automotive Range
F98-AJ6 Series
Resin-Molded Chip, High CV Facedown - Automotive Range
FEATURES
• Compliant to AEC-Q200 COMPONENT
APPLICATIONS
• Infotainment
• Cameras
• Digital Millers

+0.20 +0.20
1.60 -0.10 0.85 -0.10 0.65±0.10 1.0 Max 0.50±0.10 0.60±0.10
M 0603 1608-09 (0.033 +0.008
-0.004 )
+0.008
(0.063 -0.004 ) (0.026±0.004) (0.039 Max) (0.020±0.004) (0.024±0.004)
+0.20 +0.20
2.00 -0.10 1.25 -0.10 0.90±0.10 0.80±0.10 0.50±0.10 1.00±0.10
S 0805 2012-09 (0.079 +0.008
-0.004 ) (0.049 +0.008
-0.004 ) (0.035±0.004) (0.031±0.004) (0.020±0.004) (0.039±0.004)
MARKING
M CASE S CASE
k k
q q
Date Date
Code Code
HOW TO ORDER
F98 1C 106 M S  AJ6
Type Rated Capacitance Code Tolerance Case Size Packaging AEC-Q200

Voltage pF code: 1st two digits M = ± 20% See table
Code Reel Dia Tape Width Qty Compliant
represent significant figures, above
(mm) (mm) (pcs)
3rd digit represents multiplier
A 4000
(number of zeros to follow) Φ180 8
U 1000
Dissipation Factor: Refer to Ratings & Part Number Reference
ESR 100kHz: Refer to Ratings & Part Number Reference
Refer to Ratings & Part Number Reference at 20°C after application of rated voltage for 5 minutes
Provided that:
Leakage Current:
Termination Finish: Gold Plating (standard)
102020

F98-AJ6 Series
Resin-Molded Chip, High CV Facedown – Automotive Range
Capacitance Rated Voltage Cap
μF Code 10V (1A) 16V (1C) Code
4.7 475 M M S
10 106 M S a
Released Ratings

Rated DCL DF ESR 100kHz RMS Current
Case Cap
Part Number Voltage Max Max Max (mA) ⊿C/C MSL
Size (μF)
(V) (μA) (%@120Hz) (Ω@100kHz) 25°C 85°C 125°C
10 Volt
F981A475MMAAJ6 M 4.7 10 0.5 12 6 65 58 26 ±30 3
F981A106MMAAJ6 M 10 10 1.0 20 7.5 58 52 23 ±30 3
16 Volt
F981C475MMAAJ6 M 4.7 16 0.8 12 12 46 41 18 ±30 3
F981C106MSAAJ6 S 10 16 1.6 18 4 106 95 42 ±30 3
QUALIFICATION TABLE
F98-AJ6 series (Temperature range -55°C to +125°C)
Test
Condition
At 40°C, 90% R.H., 500 hours (No voltage applied)
Damp Heat Capacitance Change............Refer to Ratings & Part Number Reference
(Steady State) Dissipation Factor................150% or less of initial specified value
Leakage Current...................200% or less of initial specified value
After 1000 hour's application of rated voltage in series with a 33Ω resistor at 85°C, 85% R.H.,
Load Humidity Capacitance Change............Refer to Ratings & Part Number Reference
Dissipation Factor................150% or less of initial specified value
Leakage Current...................10 times or less of initial specified value
Temperature Capacitance Change............Refer to Ratings & Part Number Reference
Cycles Dissipation Factor................150% or less initial specified value
Leakage Current...................5 times or less of initial specified value
10 seconds reflow at 260°C, 5 seconds immersion at 260°C
Resistance to Capacitance Change............Refer to Ratings & Part Number Reference
Soldering Heat Dissipation Factor................Initial specified value or less
Leakage Current...................Initial specified value or less
After application of surge voltage in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF,
for 1000 successive test cycles at 85°C, capacitors shall meet the characteristic requirements in the table above.
Surge Capacitance Change............Refer to Ratings & Part Number Reference
After 1000 hours' application of rated voltage in series with a 3Ω resistor at 85°C, or derated voltage in series
with a 3Ω resistor at 125°C, capacitors shall meet the characteristic requirements in the table above.
Endurance Capacitance Change............Refer to Ratings & Part Number Reference
After applying the pressure load of 5N for 60+1/-0 seconds horizontally to the center of capacitor side body
Shear Test which has no electrode and has been soldered beforehand on a substrate, there shall be found neither
exfoliation nor its sign at the terminal electrode.
Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both
Terminal of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied
Strength with a specified jig at the center of substrate so that he substrate so that the substrate may bend by
1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals
021622

F98-AJ6 Series
Resin-Molded Chip, High CV Facedown – Automotive Range
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

Low ESR Resin Molded Solid Tantalum Chip, J-Lead
TPS Series – Standard & Low Profile
TPS Series
Low ESR
FEATURES
• Low ESR Series of Robust Mn02 Solid Electrolyte Capacitors
• CV Range: 0.15-1500μF / 2.5-50V
• 14 Case Sizes Available LEAD-FREE COMPATIBLE
COMPONENT
• Power Supply Applications
SnPb termination option is not
APPLICATIONS RoHS compliant.
• General Medium Power DC/DC Convertors

EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
MARKING E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
F 2312 6032-20 6.00 (0.236) 3.20 (0.126) 2.00 (0.079) max. 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
A, B, C, D, E, F, S, T, V, W, X, Y CASE P 0805 2012-15 2.05 (0.081) 1.35 (0.053) 1.50 (0.059) max.
1.00 ±0.10
0.50 (0.020) 0.85 (0.033)
(0.039 ±0.004)
1.00 ±0.10
LOGO Capacitance Value in pF R 0805 2012-12 2.05 (0.081) 1.30 (0.051) 1.20 (0.047) max. 0.50 (0.020) 0.85 (0.033)
227 = 220µF (0.039 ±0.004)
S 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) max. 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
Polarity
A = 10V T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) max. 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
(Anode+)
V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
XXXXX ID Code
W 2312 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) max. 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) max. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
P, R CASE Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
Capacitance Value in pF W1 dimension applies to the termination width for A dimensional area only.
106 = 10µF
Polarity
Band 106
(Anode+)
J = 6.3V
HOW TO ORDER
TPS C 107 M 010 R 0100 —
Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging ESR in mΩ Additional
See table pF code: 1st two K = ±10% 002 = 2.5Vdc R = Pure Tin 7" Reel characters may be
above digits represent M = ±20% 004 = 4Vdc S = Pure Tin 13" Reel added for special
significant figures, 006 = 6.3Vdc A = Gold Plating 7" Reel requirements
3rd digit represents 010 = 10Vdc B = Gold Plating 13" Reel V = Dry pack Option
multiplier (number of 016 = 16Vdc H = Tin Lead 7" Reel (selected ratings only)
zeros to follow) 020 = 20Vdc K = Tin Lead 13" Reel
035 = 35Vdc A, B, H, K = Please
050 = 50Vdc Contact Manufacturer
Reliability:
For AEC-Q200 availability, please contact KYOCERA AVX
020222

TPS Series
Low ESR
Capacitance Rated Voltage DC (VR) to 85°C

0.15 154 A(9000)
0.22 224 A(6000) A(7000)
0.33 334 A(6000) A(7000)
A(6000) A(6500), B(6000)
0.47 474 A(7000)
B(4000) C(2300)
0.68 684 A(6000) A(6000) B(4000)
A(3000), R(6000) A(3000) B(3000)
1.0 105 R(9000) A(6200) A(4000) R(2500,4000)
S(6000), T(2000) B(2000) C(2500)
A(3000) A(3000)
1.5 155 A(3000) C(1500,2000)
B(1800) B(2500)
A(1500)
A(3000) A(2500) C(1500)
2.2 225 R(7000) A(1800) A(1800,3500) T(2000) B(750,1500, 2000)
B(1700) B(900,1200,2500) D(1200)
C(1000)
A(3500) A(2500) A(1000,1500) B(1000) C(1000)
3.3 335 A(2100) T(1500)
B(2500) B(1300) B(750,1500,2000) C(700) D(800)
C(800)
A(1400), B(1400) A(2000) B(700,900,1500) B(700,1500) C(600),
4.7 475 S(4000) A(1800) B(750,1000) D(250,300,500,700)
R(3000,5000) B(800,1500) C(700) D(700)
X(500)
A(1800), B(1300) A(1500) A(1000) B(600,1000 C(350) D(200,300,
6.8 685 A(1800) B(700) C(500,600,700)
T(1800) B(600,1200) C(700) D(150,400,500) 500,600)
A(1500), B(1500) A(900,1800), B(1000) A(1000), B(500,800) B(500,1000) C(600)
B(1800) C(300,500) D(500)
10 106 R(3000) R(1000,1500,3000) P(2000)(M), S(900) C(500), T(800,1000) C(500,700) W(250, D(125,300)
D(500) E(250,300, 400,500)
T(1000) T(1000,2000) W(500,600) 500) E(100,150,200)Y(250)
A(1000) C(350,450)
E(250)
15 156 A(700,1500) B(450,600), C(700) B(500,800) C(300,700) B(500) C(400,450) C(220,300) D(100,300) D(100,300)
V(250)
T(1200) Y(250)
A(300,500,900) A(900) B(400,600) B(400,600) C(275,400) D(125,200,300,400)
22 226 B(375,600) B(400,500,700) C(150,250,300,375) C(100,150,400) D(100,200,300) E(125,200,300)
C(500), S(900) C(300), T(800) D(700), W(500) D(200,300) F(300) Y(200)
B(350,500)
A(700) C(400) D(100,200,300)
A(600) C(100,150,225,300)
B(250,425,500,650) E(100,175,200,300) D(200,300)
33 336 B(250,350,450,600) D(200), W(140,175, C(300) D(100,200)
C(150,375,500) F(150,200,400) E(100,250,300) V(200)
T(800) 250,400,500)
W(350) Y(200)
Y(300,400)
B(250,350,500,650) C(110,350)
D(75,100,200)
A(800) B(250,350,500) C(200,350) D(80,100,150,200) D(125,150,250 D(300), E(200,250)
47 476 A(500) E(70,125,150,
C(300), T(1200) D(100,300) W(200) E(80,100,125) (Y250) V(150,200)
200,250), X(200)
W(125,150,250) X(180), Y(250)
B(600) C(125,200)
B(250,350,500) D(70,150, 200,300) D(150,200,300)
C(80,100,200,300) D(70,100,150)
68 686 C(150,200) E(125,150,200) E(125,200) V(150,200)
D(100,150), F(200), X(150)
W(110,125,250) Y(200) V(80,95,150,200)
W(100,150) Y(100,200) Y(150,200,250)
B(400)
C(200)
B(200,250, C(75,100,150,200)
B(250,400) C(75,150), D(60,100,125,150) D(85,100,150)
350,500) D(50,65,80,100,125,
100 107 B(200) D(300) W(100,150), E(55,100,125,150) E(100,150,200) E(150), V(100)
T(500)(M) 150), E(125), W(150)
Y(100) F(150,200)(M) V(60,85,100,200)
W(100) X(85,150,200)
Y(100,150,200)
Y(100,150,200)
C(150), D(50,85,100)
C(50,90,150,200,250) D(60,85,100,125,150)
E(100), F(200)
150 157 B(150) B(250) C(70,80) D(50,125) E(50,100), V(45,75) V(80) V(150)(M)
X(100)(M)
Y(40,50) Y(200)(M)
Y(100,150,200)
C(70,100,125,250) D(40,50,100,150)
B(150, D(200)(M)
D(40,50,100) D(50,100,125) E(50,60,70,100,
220 227 200,600) E(50,100,150)
Y(40,50,75) E(100), F(200) 125,150)
D(45) V(50,75,100,150)
Y(100,150) Y(100,150,200)
C(100) C(80,100)
D(50,65,100,150)
D(35,45,100) D(45,50,70,100)
330 337 Y(40) E(40,50,60,100) E(200)(M)
F(200) E(50,100,125,150)
V(40,60,100)
X(100) V(100), Y(75,100,150)
D(35) D(45,60,100,200)
D(45,100) E(45,50,60,100,200)
470 477 F(200) E(45,50,60,100,200)
E(35,45,100) V(40,60,100)
Y(100) V(40,55,100), Y(150)
D(35,50)
D(45,60,100) E(45,60,100) E(150)(M)
680 687 E(35,50)
E(40,60,100) V(35,40,50) V(100)(M)
Y(100)
E(30,40) E(40,60)
1000 108 E(100)(M), V(40,50)(M)
Y(100)(M) V(25,35,40,50)
D(100)
E(50,75)
1500 158 E(50)
V(50,75)(M)
V(30,40)(M)
Released ratings(M tolerance only) (ESR ratings in mOhms in parentheses)

NOTE: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards.
080321

TPS Series
Low ESR
ESR
Rated Rated Category Category DCL DF 100kHz RMS Current (A)
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
2.5 Volt @ 85°C
TPSB107*002#0200 B 100 2.5 85 1.7 125 2.5 8 200 0.652 0.587 0.261 1
TPSB157*002#0150 B 150 2.5 85 1.7 125 3 10 150 0.753 0.677 0.301 1
TPSB227*002#0150 B 220 2.5 85 1.7 125 4.4 16 150 0.753 0.677 0.301 1
TPSB227*002#0200 B 220 2.5 85 1.7 125 4.4 16 200 0.652 0.587 0.261 1
TPSB227*002#0600 B 220 2.5 85 1.7 125 4.4 16 600 0.376 0.339 0.151 1
TPSD227*002#0045 D 220 2.5 85 1.7 125 5.5 8 45 1.826 1.643 0.730 11)
TPSY337*002#0040 Y 330 2.5 85 1.7 125 8.2 8 40 1.768 1.591 0.707 11)
TPSD477*002#0035 D 470 2.5 85 1.7 125 11.6 8 35 2.070 1.863 0.828 11)
TPSF477*002#0200 F 470 2.5 85 1.7 125 11.8 12 200 0.707 0.636 0.283 1
TPSY477*002#0100 Y 470 2.5 85 1.7 125 11 12 100 1.118 1.006 0.447 11)
TPSD687*002#0035 D 680 2.5 85 1.7 125 17 16 35 2.070 1.863 0.828 11)
TPSD687*002#0050 D 680 2.5 85 1.7 125 17 16 50 1.732 1.559 0.693 11)
TPSE687*002#0035 E 680 2.5 85 1.7 125 17 10 35 2.171 1.954 0.868 11)
TPSE687*002#0050 E 680 2.5 85 1.7 125 17 10 50 1.817 1.635 0.727 11)
TPSY687*002#0100 Y 680 2.5 85 1.7 125 17 12 100 1.118 1.006 0.447 11)
TPSE108*002#0030 E 1000 2.5 85 1.7 125 25 14 30 2.345 2.111 0.938 11)
TPSE108*002#0040 E 1000 2.5 85 1.7 125 25 14 40 2.031 1.828 0.812 11)
TPSY108M002#0100 Y 1000 2.5 85 1.7 125 25 30 100 1.118 1.006 0.447 11)
TPSD158*002#0100 D 1500 2.5 85 1.7 125 37.5 60 100 1.225 1.102 0.490 11)
TPSE158*002#0050 E 1500 2.5 85 1.7 125 37.5 20 50 1.817 1.635 0.727 11)
TPSV158M002#0030 V 1500 2.5 85 1.7 125 30 20 30 2.887 2.598 1.155 11)
TPSV158M002#0040 V 1500 2.5 85 1.7 125 30 20 40 2.500 2.250 1.000 11)
4 Volt @ 85°C
TPSR106*004#3000 R 10 4 85 2.7 125 0.5 6 3000 0.135 0.122 0.054 1
TPSA476*004#0500 A 47 4 85 2.7 125 1.9 8 500 0.387 0.349 0.155 1
TPSB107*004#0200 B 100 4 85 2.7 125 4 8 200 0.652 0.587 0.261 1
TPSB107*004#0250 B 100 4 85 2.7 125 4 8 250 0.583 0.525 0.233 1
TPSB107*004#0350 B 100 4 85 2.7 125 4 8 350 0.493 0.444 0.197 1
TPSB107*004#0500 B 100 4 85 2.7 125 4 8 500 0.412 0.371 0.165 1
TPST107M004#0500 T 100 4 85 2.7 125 4 14 500 0.400 0.360 0.160 1
TPSW107*004#0100 W 100 4 85 2.7 125 4 6 100 0.949 0.854 0.379 1
TPSB157*004#0250 B 150 4 85 2.7 125 6 10 250 0.583 0.525 0.233 1
TPSC157*004#0070 C 150 4 85 2.7 125 6 6 70 1.254 1.128 0.501 1
TPSC157*004#0080 C 150 4 85 2.7 125 6 6 80 1.173 1.055 0.469 1
TPSD227*004#0040 D 220 4 85 2.7 125 8.8 8 40 1.936 1.743 0.775 11)
TPSD227*004#0050 D 220 4 85 2.7 125 8.8 8 50 1.732 1.559 0.693 11)
TPSD227*004#0100 D 220 4 85 2.7 125 8.8 8 100 1.225 1.102 0.490 11)
TPSY227*004#0040 Y 220 4 85 2.7 125 8.8 8 40 1.768 1.591 0.707 11)
TPSY227*004#0050 Y 220 4 85 2.7 125 8.8 8 50 1.581 1.423 0.632 11)
TPSY227*004#0075 Y 220 4 85 2.7 125 8.8 8 75 1.291 1.162 0.516 11)
TPSC337*004#0100 C 330 4 85 2.7 125 13.2 8 100 1.049 0.944 0.420 1
TPSD337*004#0035 D 330 4 85 2.7 125 13.2 8 35 2.070 1.863 0.828 11)
TPSD337*004#0045 D 330 4 85 2.7 125 13.2 8 45 1.826 1.643 0.730 11)
TPSD337*004#0100 D 330 4 85 2.7 125 13.2 8 100 1.225 1.102 0.490 11)
TPSF337*004#0200 F 330 4 85 2.7 125 13.2 10 200 0.707 0.636 0.283 1
TPSX337*004#0100 X 330 4 85 2.7 125 13.2 8 100 1.000 0.900 0.400 11)
TPSD477*004#0045 D 470 4 85 2.7 125 18.8 12 45 1.826 1.643 0.730 11)
TPSD477*004#0100 D 470 4 85 2.7 125 18.8 12 100 1.225 1.102 0.490 11)
TPSE477*004#0035 E 470 4 85 2.7 125 18.8 10 35 2.171 1.954 0.868 11)
TPSE477*004#0045 E 470 4 85 2.7 125 18.8 10 45 1.915 1.723 0.766 11)
TPSE477*004#0100 E 470 4 85 2.7 125 18.8 10 100 1.285 1.156 0.514 11)
TPSD687*004#0045 D 680 4 85 2.7 125 27.2 14 45 1.826 1.643 0.730 11)
TPSD687*004#0060 D 680 4 85 2.7 125 27.2 14 60 1.581 1.423 0.632 11)
TPSD687*004#0100 D 680 4 85 2.7 125 27.2 14 100 1.225 1.102 0.490 11)
TPSE687*004#0040 E 680 4 85 2.7 125 27.2 10 40 2.031 1.828 0.812 11)
TPSE687*004#0060 E 680 4 85 2.7 125 27.2 10 60 1.658 1.492 0.663 11)
TPSE687*004#0100 E 680 4 85 2.7 125 27.2 10 100 1.285 1.156 0.514 11)
TPSE108*004#0040 E 1000 4 85 2.7 125 40 14 40 2.031 1.828 0.812 11)
TPSE108*004#0060 E 1000 4 85 2.7 125 40 14 60 1.658 1.492 0.663 11)
TPSV108*004#0025 V 1000 4 85 2.7 125 40 16 25 3.162 2.846 1.265 11)
TPSV108*004#0035 V 1000 4 85 2.7 125 40 16 35 2.673 2.405 1.069 11)
TPSV108*004#0040 V 1000 4 85 2.7 125 40 16 40 2.500 2.250 1.000 11)
TPSV108*004#0050 V 1000 4 85 2.7 125 40 16 50 2.236 2.012 0.894 11)
TPSE158*004#0050 E 1500 4 85 2.7 125 60 30 50 1.817 1.635 0.727 11)
TPSE158*004#0075 E 1500 4 85 2.7 125 60 30 75 1.483 1.335 0.593 11)
TPSV158M004#0050 V 1500 4 85 2.7 125 60 30 50 2.236 2.012 0.894 11)
TPSV158M004#0075 V 1500 4 85 2.7 125 60 30 75 1.826 1.643 0.730 11)
6.3 Volt @ 85°C
TPSR225*006#7000 R 2.2 6.3 85 4 125 0.5 6 7000 0.089 0.080 0.035 1
TPSA335*006#2100 A 3.3 6.3 85 4 125 0.5 6 2100 0.189 0.170 0.076 1
TPSS475*006#4000 S 4.7 6.3 85 4 125 0.5 6 4000 0.127 0.115 0.051 1
TPSA685*006#1800 A 6.8 6.3 85 4 125 0.5 6 1800 0.204 0.184 0.082 1
TPSA106*006#1500 A 10 6.3 85 4 125 0.6 6 1500 0.224 0.201 0.089 1
TPSB106*006#1500 B 10 6.3 85 4 125 0.6 6 1500 0.238 0.214 0.095 1
TPSR106*006#1000 R 10 6.3 85 4 125 0.6 8 1000 0.235 0.211 0.094 1
TPSR106*006#1500 R 10 6.3 85 4 125 0.6 8 1500 0.191 0.172 0.077 1
TPSR106*006#3000 R 10 6.3 85 4 125 0.6 8 3000 0.135 0.122 0.054 1
TPST106*006#1000 T 10 6.3 85 4 125 0.6 6 1000 0.283 0.255 0.113 1
TPSA156*006#0700 A 15 6.3 85 4 125 0.9 6 700 0.327 0.295 0.131 1
TPSA156*006#1500 A 15 6.3 85 4 125 0.9 6 1500 0.224 0.201 0.089 1
TPSA226*006#0300 A 22 6.3 85 4 125 1.4 6 300 0.500 0.450 0.200 1
041422

TPS Series
Low ESR
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TPSA226*006#0500 A 22 6.3 85 4 125 1.4 6 500 0.387 0.349 0.155 1
TPSA226*006#0900 A 22 6.3 85 4 125 1.4 6 900 0.289 0.260 0.115 1
TPSB226*006#0375 B 22 6.3 85 4 125 1.4 6 375 0.476 0.428 0.190 1
TPSB226*006#0600 B 22 6.3 85 4 125 1.4 6 600 0.376 0.339 0.151 1
TPSC226*006#0500 C 22 6.3 85 4 125 1.4 6 500 0.469 0.422 0.188 1
TPSS226*006#0900 S 22 6.3 85 4 125 1.3 10 900 0.269 0.242 0.107 1
TPSA336*006#0600 A 33 6.3 85 4 125 2.1 8 600 0.354 0.318 0.141 1
TPSB336*006#0250 B 33 6.3 85 4 125 2.1 6 250 0.583 0.525 0.233 1
TPSB336*006#0350 B 33 6.3 85 4 125 2.1 6 350 0.493 0.444 0.197 1
TPSB336*006#0450 B 33 6.3 85 4 125 2.1 6 450 0.435 0.391 0.174 1
TPSB336*006#0600 B 33 6.3 85 4 125 2.1 6 600 0.376 0.339 0.151 1
TPST336*006#0800 T 33 6.3 85 4 125 2.1 10 800 0.316 0.285 0.126 1
TPSA476*006#0800 A 47 6.3 85 4 125 2.8 10 800 0.306 0.276 0.122 1
TPSB476*006#0250 B 47 6.3 85 4 125 3 6 250 0.583 0.525 0.233 1
TPSB476*006#0350 B 47 6.3 85 4 125 3 6 350 0.493 0.444 0.197 1
TPSB476*006#0500 B 47 6.3 85 4 125 3 6 500 0.412 0.371 0.165 1
TPSC476*006#0300 C 47 6.3 85 4 125 3 6 300 0.606 0.545 0.242 1
TPST476*006#1200 T 47 6.3 85 4 125 2.8 10 1200 0.258 0.232 0.103 1
TPSB686*006#0250 B 68 6.3 85 4 125 4 8 250 0.583 0.525 0.233 1
TPSB686*006#0350 B 68 6.3 85 4 125 4 8 350 0.493 0.444 0.197 1
TPSB686*006#0500 B 68 6.3 85 4 125 4 8 500 0.412 0.371 0.165 1
TPSC686*006#0150 C 68 6.3 85 4 125 4.3 6 150 0.856 0.771 0.343 1
TPSC686*006#0200 C 68 6.3 85 4 125 4.3 6 200 0.742 0.667 0.297 1
TPSW686*006#0110 W 68 6.3 85 4 125 4.3 6 110 0.905 0.814 0.362 1
TPSW686*006#0125 W 68 6.3 85 4 125 4.3 6 125 0.849 0.764 0.339 1
TPSW686*006#0250 W 68 6.3 85 4 125 4.3 6 250 0.600 0.540 0.240 1
TPSB107*006#0250 B 100 6.3 85 4 125 6.3 10 250 0.583 0.525 0.233 1
TPSB107*006#0400 B 100 6.3 85 4 125 6.3 10 400 0.461 0.415 0.184 1
TPSC107*006#0075 C 100 6.3 85 4 125 6.3 6 75 1.211 1.090 0.484 1
TPSC107*006#0150 C 100 6.3 85 4 125 6.3 6 150 0.856 0.771 0.343 1
TPSD107*006#0300 D 100 6.3 85 4 125 6.3 6 300 0.707 0.636 0.283 11)
TPSW107*006#0100 W 100 6.3 85 4 125 6.3 6 100 0.949 0.854 0.379 1
TPSW107*006#0150 W 100 6.3 85 4 125 6.3 6 150 0.775 0.697 0.310 1
TPSY107*006#0100 Y 100 6.3 85 4 125 6.3 6 100 1.118 1.006 0.447 11)
TPSC157*006#0050 C 150 6.3 85 4 125 9.5 6 50 1.483 1.335 0.593 1
TPSC157*006#0090 C 150 6.3 85 4 125 9.5 6 90 1.106 0.995 0.442 1
TPSC157*006#0150 C 150 6.3 85 4 125 9.5 6 150 0.856 0.771 0.343 1
TPSC157*006#0200 C 150 6.3 85 4 125 9.5 6 200 0.742 0.667 0.297 1
TPSC157*006#0250 C 150 6.3 85 4 125 9.5 6 250 0.663 0.597 0.265 1
TPSD157*006#0050 D 150 6.3 85 4 125 9.5 6 50 1.732 1.559 0.693 11)
TPSD157*006#0125 D 150 6.3 85 4 125 9.5 6 125 1.095 0.986 0.438 11)
TPSY157*006#0040 Y 150 6.3 85 4 125 9.5 6 40 1.768 1.591 0.707 11)
TPSY157*006#0050 Y 150 6.3 85 4 125 9.5 6 50 1.581 1.423 0.632 11)
TPSC227*006#0070 C 220 6.3 85 4 125 13.9 8 70 1.254 1.128 0.501 1
TPSC227*006#0100 C 220 6.3 85 4 125 13.9 8 100 1.049 0.944 0.420 1
TPSC227*006#0125 C 220 6.3 85 4 125 13.9 8 125 0.938 0.844 0.375 1
TPSC227*006#0250 C 220 6.3 85 4 125 13.9 8 250 0.663 0.597 0.265 1
TPSD227*006#0050 D 220 6.3 85 4 125 13.9 8 50 1.732 1.559 0.693 11)
TPSD227*006#0100 D 220 6.3 85 4 125 13.9 8 100 1.225 1.102 0.490 11)
TPSD227*006#0125 D 220 6.3 85 4 125 13.9 8 125 1.095 0.986 0.438 11)
TPSE227*006#0100 E 220 6.3 85 4 125 13.9 8 100 1.285 1.156 0.514 11)
TPSF227*006#0200 F 220 6.3 85 4 125 13.2 10 200 0.707 0.636 0.283 1
TPSY227*006#0100 Y 220 6.3 85 4 125 13.9 8 100 1.118 1.006 0.447 11)
TPSY227*006#0150 Y 220 6.3 85 4 125 13.9 8 150 0.913 0.822 0.365 11)
TPSC337*006#0080 C 330 6.3 85 4 125 19.8 12 80 1.173 1.055 0.469 1
TPSC337*006#0100 C 330 6.3 85 4 125 19.8 12 100 1.049 0.944 0.420 1
TPSD337*006#0045 D 330 6.3 85 4 125 20.8 8 45 1.826 1.643 0.730 11)
TPSD337*006#0050 D 330 6.3 85 4 125 20.8 8 50 1.732 1.559 0.693 11)
TPSD337*006#0070 D 330 6.3 85 4 125 20.8 8 70 1.464 1.317 0.586 11)
TPSD337*006#0100 D 330 6.3 85 4 125 20.8 8 100 1.225 1.102 0.490 11)
TPSE337*006#0050 E 330 6.3 85 4 125 20.8 8 50 1.817 1.635 0.727 11)
TPSE337*006#0100 E 330 6.3 85 4 125 20.8 8 100 1.285 1.156 0.514 11)
TPSE337*006#0125 E 330 6.3 85 4 125 20.8 8 125 1.149 1.034 0.460 11)
TPSE337*006#0150 E 330 6.3 85 4 125 20.8 8 150 1.049 0.944 0.420 11)
TPSV337*006#0100 V 330 6.3 85 4 125 20.8 8 100 1.581 1.423 0.632 11)
TPSY337*006#0075 Y 330 6.3 85 4 125 20.8 12 75 1.291 1.162 0.516 11)
TPSY337*006#0100 Y 330 6.3 85 4 125 20.8 12 100 1.118 1.006 0.447 11)
TPSY337*006#0150 Y 330 6.3 85 4 125 20.8 12 150 0.913 0.822 0.365 11)
TPSD477*006#0045 D 470 6.3 85 4 125 28 12 45 1.826 1.643 0.730 11)
TPSD477*006#0060 D 470 6.3 85 4 125 28 12 60 1.581 1.423 0.632 11)
TPSD477*006#0100 D 470 6.3 85 4 125 28 12 100 1.225 1.102 0.490 11)
TPSD477*006#0200 D 470 6.3 85 4 125 28 12 200 0.866 0.779 0.346 11)
TPSE477*006#0045 E 470 6.3 85 4 125 28 10 45 1.915 1.723 0.766 11)
TPSE477*006#0050 E 470 6.3 85 4 125 28 10 50 1.817 1.635 0.727 11)
TPSE477*006#0060 E 470 6.3 85 4 125 28 10 60 1.658 1.492 0.663 11)
TPSE477*006#0100 E 470 6.3 85 4 125 28 10 100 1.285 1.156 0.514 11)
TPSE477*006#0200 E 470 6.3 85 4 125 28 10 200 0.908 0.817 0.363 11)
TPSV477*006#0040 V 470 6.3 85 4 125 28 10 40 2.500 2.250 1.000 11)
TPSV477*006#0055 V 470 6.3 85 4 125 28 10 55 2.132 1.919 0.853 11)
TPSV477*006#0100 V 470 6.3 85 4 125 28 10 100 1.581 1.423 0.632 11)
TPSY477*006#0150 Y 470 6,3 85 4 125 28.2 20 150 0.913 0.822 0.365 11)
TPSE687*006#0045 E 680 6.3 85 4 125 42.8 10 45 1.915 1.723 0.766 11)
TPSE687*006#0060 E 680 6.3 85 4 125 42.8 10 60 1.658 1.492 0.663 11)
TPSE687*006#0100 E 680 6.3 85 4 125 42.8 10 100 1.285 1.156 0.514 11)
041422

TPS Series
Low ESR
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TPSV687*006#0035 V 680 6.3 85 4 125 42.8 10 35 2.673 2.405 1.069 11)
TPSV687*006#0040 V 680 6.3 85 4 125 42.8 10 40 2.500 2.250 1.000 11)
TPSV687*006#0050 V 680 6.3 85 4 125 42.8 10 50 2.236 2.012 0.894 11)
TPSE108M006#0100 E 1000 6.3 85 4 125 60 20 100 1.285 1.156 0.514 11)
TPSV108M006#0040 V 1000 6.3 85 4 125 60 16 40 2.500 2.250 1.000 11)
TPSV108M006#0050 V 1000 6.3 85 4 125 60 16 50 2.236 2.012 0.894 11)
10 Volt @ 85°C
TPSR105*010#9000 R 1 10 85 7 125 0.5 4 9000 0.078 0.070 0.031 1
TPSA225*010#1800 A 2.2 10 85 7 125 0.5 6 1800 0.204 0.184 0.082 1
TPST335*010#1500 T 3.3 10 85 7 125 0.5 6 1500 0.231 0.208 0.092 1
TPSA475*010#1400 A 4.7 10 85 7 125 0.5 6 1400 0.231 0.208 0.093 1
TPSB475*010#1400 B 4.7 10 85 7 125 0.5 6 1400 0.246 0.222 0.099 1
TPSR475*010#3000 R 4.7 10 85 7 125 0.5 6 3000 0.135 0.122 0.054 1
TPSR475*010#5000 R 4.7 10 85 7 125 0.5 6 5000 0.105 0.094 0.042 1
TPSA685*010#1800 A 6.8 10 85 7 125 0.7 6 1800 0.204 0.184 0.082 1
TPSB685*010#1300 B 6.8 10 85 7 125 0.7 6 1300 0.256 0.230 0.102 1
TPST685*010#1800 T 6.8 10 85 7 125 0.7 6 1800 0.211 0.190 0.084 1
TPSA106*010#0900 A 10 10 85 7 125 1 6 900 0.289 0.260 0.115 1
TPSA106*010#1800 A 10 10 85 7 125 1 6 1800 0.204 0.184 0.082 1
TPSB106*010#1000 B 10 10 85 7 125 1 6 1000 0.292 0.262 0.117 1
TPSP106M010#2000 P 10 10 85 7 125 1 8 2000 0.173 0.156 0.069 1
TPSS106*010#0900 S 10 10 85 7 125 1 8 900 0.269 0.242 0.107 1
TPST106*010#1000 T 10 10 85 7 125 1 6 1000 0.283 0.255 0.113 1
TPST106*010#2000 T 10 10 85 7 125 1 6 2000 0.200 0.180 0.080 1
TPSA156*010#1000 A 15 10 85 7 125 1.5 6 1000 0.274 0.246 0.110 1
TPSB156*010#0450 B 15 10 85 7 125 1.5 6 450 0.435 0.391 0.174 1
TPSB156*010#0600 B 15 10 85 7 125 1.5 6 600 0.376 0.339 0.151 1
TPSC156*010#0700 C 15 10 85 7 125 1.5 6 700 0.396 0.357 0.159 1
TPST156*010#1200 T 15 10 85 7 125 1.5 8 1200 0.258 0.232 0.103 1
TPSA226*010#0900 A 22 10 85 7 125 2.2 8 900 0.289 0.260 0.115 1
TPSB226*010#0400 B 22 10 85 7 125 2.2 6 400 0.461 0.415 0.184 1
TPSB226*010#0500 B 22 10 85 7 125 2.2 6 500 0.412 0.371 0.165 1
TPSB226*010#0700 B 22 10 85 7 125 2.2 6 700 0.348 0.314 0.139 1
TPSC226*010#0300 C 22 10 85 7 125 2.2 6 300 0.606 0.545 0.242 1
TPST226*010#0800 T 22 10 85 7 125 2.2 8 800 0.316 0.285 0.126 1
TPSA336*010#0700 A 33 10 85 7 125 3.3 8 700 0.327 0.295 0.131 1
TPSB336*010#0250 B 33 10 85 7 125 3.3 6 250 0.583 0.525 0.233 1
TPSB336*010#0425 B 33 10 85 7 125 3.3 6 425 0.447 0.402 0.179 1
TPSB336*010#0500 B 33 10 85 7 125 3.3 6 500 0.412 0.371 0.165 1
TPSB336*010#0650 B 33 10 85 7 125 3.3 6 650 0.362 0.325 0.145 1
TPSC336*010#0150 C 33 10 85 7 125 3.3 6 150 0.856 0.771 0.343 1
TPSC336*010#0375 C 33 10 85 7 125 3.3 6 375 0.542 0.487 0.217 1
TPSC336*010#0500 C 33 10 85 7 125 3.3 6 500 0.469 0.422 0.188 1
TPSW336*010#0350 W 33 10 85 7 125 3.3 6 350 0.507 0.456 0.203 1
TPSB476*010#0250 B 47 10 85 7 125 4.7 8 250 0.583 0.525 0.233 1
TPSB476*010#0350 B 47 10 85 7 125 4.7 8 350 0.493 0.444 0.197 1
TPSB476*010#0500 B 47 10 85 7 125 4.7 8 500 0.412 0.371 0.165 1
TPSB476*010#0650 B 47 10 85 7 125 4.7 8 650 0.362 0.325 0.145 1
TPSC476*010#0200 C 47 10 85 7 125 4.7 6 200 0.742 0.667 0.297 1
TPSC476*010#0350 C 47 10 85 7 125 4.7 6 350 0.561 0.505 0.224 1
TPSD476*010#0100 D 47 10 85 7 125 4.7 6 100 1.225 1.102 0.490 11)
TPSD476*010#0300 D 47 10 85 7 125 4.7 6 300 0.707 0.636 0.283 11)
TPSW476*010#0125 W 47 10 85 7 125 4.7 6 125 0.849 0.764 0.339 1
TPSW476*010#0150 W 47 10 85 7 125 4.7 6 150 0.775 0.697 0.310 1
TPSW476*010#0250 W 47 10 85 7 125 4.7 6 250 0.600 0.540 0.240 1
TPSB686*010#0600 B 68 10 85 7 125 6.8 8 600 0.376 0.339 0.151 1
TPSC686*010#0080 C 68 10 85 7 125 6.8 6 80 1.173 1.055 0.469 1
TPSC686*010#0100 C 68 10 85 7 125 6.8 6 100 1.049 0.944 0.420 1
TPSC686*010#0200 C 68 10 85 7 125 6.8 6 200 0.742 0.667 0.297 1
TPSC686*010#0300 C 68 10 85 7 125 6.8 6 300 0.606 0.545 0.242 1
TPSD686*010#0100 D 68 10 85 7 125 6.8 6 100 1.225 1.102 0.490 11)
TPSD686*010#0150 D 68 10 85 7 125 6.8 6 150 1.000 0.900 0.400 11)
TPSY686*010#0100 Y 68 10 85 7 125 6.8 6 100 1.118 1.006 0.447 11)
TPSY686*010#0200 Y 68 10 85 7 125 6.8 6 200 0.791 0.712 0.316 11)
TPSW686*010#0100 W 68 10 85 7 125 6.8 6 100 0.949 0.854 0.379 1
TPSW686*010#0150 W 68 10 85 7 125 6.8 6 150 0.775 0.697 0.310 1
TPSB107*010#0400 B 100 10 85 7 125 10 8 400 0.461 0.415 0.184 1
TPSC107*010#0075 C 100 10 85 7 125 10 8 75 1.211 1.090 0.484 1
TPSC107*010#0100 C 100 10 85 7 125 10 8 100 1.049 0.944 0.420 1
TPSC107*010#0150 C 100 10 85 7 125 10 8 150 0.856 0.771 0.343 1
TPSC107*010#0200 C 100 10 85 7 125 10 8 200 0.742 0.667 0.297 1
TPSD107*010#0050 D 100 10 85 7 125 10 6 50 1.732 1.559 0.693 11)
TPSD107*010#0065 D 100 10 85 7 125 10 6 65 1.519 1.367 0.608 11)
TPSD107*010#0080 D 100 10 85 7 125 10 6 80 1.369 1.232 0.548 11)
TPSD107*010#0100 D 100 10 85 7 125 10 6 100 1.225 1.102 0.490 11)
TPSD107*010#0125 D 100 10 85 7 125 10 6 125 1.095 0.986 0.438 11)
TPSD107*010#0150 D 100 10 85 7 125 10 6 150 1.000 0.900 0.400 11)
TPSE107*010#0125 E 100 10 85 7 125 10 6 125 1.149 1.034 0.460 11)
TPSW107*010#0150 W 100 10 85 7 125 10 6 150 0.775 0.697 0.310 1
TPSX107*010#0085 X 100 10 85 7 125 10 8 85 1.085 0.976 0.434 11)
TPSX107*010#0150 X 100 10 85 7 125 10 8 150 0.816 0.735 0.327 11)
TPSX107*010#0200 X 100 10 85 7 125 10 8 200 0.707 0.636 0.283 11)
TPSY107*010#0100 Y 100 10 85 7 125 10 6 100 1.118 1.006 0.447 11)
040122

TPS Series
Low ESR
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TPSY107*010#0150 Y 100 10 85 7 125 10 6 150 0.913 0.822 0.365 11)
TPSY107*010#0200 Y 100 10 85 7 125 10 6 200 0.791 0.712 0.316 11)
TPSC157*010#0150 C 150 10 85 7 125 15 8 150 0.856 0.771 0.343 1
TPSD157*010#0050 D 150 10 85 7 125 15 8 50 1.732 1.559 0.693 11)
TPSD157*010#0085 D 150 10 85 7 125 15 8 85 1.328 1.196 0.531 11)
TPSD157*010#0100 D 150 10 85 7 125 15 8 100 1.225 1.102 0.490 11)
TPSE157*010#0100 E 150 10 85 7 125 15 8 100 1.285 1.156 0.514 11)
TPSF157*010#0200 F 150 10 85 7 125 15 10 200 0.707 0.636 0.283 1
TPSX157M010#0100 X 150 10 85 7 125 15 6 100 1.000 0.900 0.400 11)
TPSY157*010#0100 Y 150 10 85 7 125 15 6 100 1.118 1.006 0.447 11)
TPSY157*010#0150 Y 150 10 85 7 125 15 6 150 0.913 0.822 0.365 11)
TPSY157*010#0200 Y 150 10 85 7 125 15 6 200 0.791 0.712 0.316 11)
TPSD227*010#0040 D 220 10 85 7 125 22 8 40 1.936 1.743 0.775 11)
TPSD227*010#0050 D 220 10 85 7 125 22 8 50 1.732 1.559 0.693 11)
TPSD227*010#0100 D 220 10 85 7 125 22 8 100 1.225 1.102 0.490 11)
TPSD227*010#0150 D 220 10 85 7 125 22 8 150 1.000 0.900 0.400 11)
TPSE227*010#0050 E 220 10 85 7 125 22 8 50 1.817 1.635 0.727 11)
TPSE227*010#0060 E 220 10 85 7 125 22 8 60 1.658 1.492 0.663 11)
TPSE227*010#0070 E 220 10 85 7 125 22 8 70 1.535 1.382 0.614 11)
TPSE227*010#0100 E 220 10 85 7 125 22 8 100 1.285 1.156 0.514 11)
TPSE227*010#0125 E 220 10 85 7 125 22 8 125 1.149 1.034 0.460 11)
TPSE227*010#0150 E 220 10 85 7 125 22 8 150 1.049 0.944 0.420 11)
TPSY227*010#0100 Y 220 10 85 7 125 22 10 100 1.118 1.006 0.447 11)
TPSY227*010#0150 Y 220 10 85 7 125 22 10 150 0.913 0.822 0.365 11)
TPSY227*010#0200 Y 220 10 85 7 125 22 10 200 0.791 0.712 0.316 11)
TPSD337*010#0050 D 330 10 85 7 125 33 8 50 1.732 1.559 0.693 11)
TPSD337*010#0065 D 330 10 85 7 125 33 8 65 1.519 1.367 0.608 11)
TPSD337*010#0100 D 330 10 85 7 125 33 8 100 1.225 1.102 0.490 11)
TPSD337*010#0150 D 330 10 85 7 125 33 8 150 1.000 0.900 0.400 11)
TPSE337*010#0040 E 330 10 85 7 125 33 8 40 2.031 1.828 0.812 11)
TPSE337*010#0050 E 330 10 85 7 125 33 8 50 1.817 1.635 0.727 11)
TPSE337*010#0060 E 330 10 85 7 125 33 8 60 1.658 1.492 0.663 11)
TPSE337*010#0100 E 330 10 85 7 125 33 8 100 1.285 1.156 0.514 11)
TPSV337*010#0040 V 330 10 85 7 125 33 10 40 2.500 2.250 1.000 11)
TPSV337*010#0060 V 330 10 85 7 125 33 10 60 2.041 1.837 0.816 11)
TPSV337*010#0100 V 330 10 85 7 125 33 10 100 1.581 1.423 0.632 11)
TPSE477*010#0045 E 470 10 85 7 125 47 10 45 1.915 1.723 0.766 11)
TPSE477*010#0050 E 470 10 85 7 125 47 10 50 1.817 1.635 0.727 11)
TPSE477*010#0060 E 470 10 85 7 125 47 10 60 1.658 1.492 0.663 11)
TPSE477*010#0100 E 470 10 85 7 125 47 10 100 1.285 1.156 0.514 11)
TPSE477*010#0200 E 470 10 85 7 125 47 10 200 0.908 0.817 0.363 11)
TPSV477*010#0040 V 470 10 85 7 125 47 10 40 2.500 2.250 1.000 11)
TPSV477*010#0060 V 470 10 85 7 125 47 10 60 2.041 1.837 0.816 11)
TPSV477*010#0100 V 470 10 85 7 125 47 10 100 1.581 1.423 0.632 11)
TPSE687M010#0150V E 680 10 85 7 125 68 18 150 1.049 0.944 0.420 3
TPSV687M010#0100V V 680 10 85 7 125 68 18 100 1.581 1.423 0.632 3
@
16 Volt 85°C
TPSA105*016#6200 A 1 16 85 10 125 0.5 4 6200 0.110 0.099 0.044 1
TPSA225*016#1800 A 2.2 16 85 10 125 0.5 6 1800 0.204 0.184 0.082 1
TPSA225*016#3500 A 2.2 16 85 10 125 0.5 6 3500 0.146 0.132 0.059 1
TPST225*016#2000 T 2.2 16 85 10 125 0.5 6 2000 0.200 0.180 0.080 1
TPSA335*016#3500 A 3.3 16 85 10 125 0.5 6 3500 0.146 0.132 0.059 1
TPSB335*016#2500 B 3.3 16 85 10 125 0.5 6 2500 0.184 0.166 0.074 1
TPSA475*016#2000 A 4.7 16 85 10 125 0.8 6 2000 0.194 0.174 0.077 1
TPSB475*016#0800 B 4.7 16 85 10 125 0.8 6 800 0.326 0.293 0.130 1
TPSB475*016#1500 B 4.7 16 85 10 125 0.8 6 1500 0.238 0.214 0.095 1
TPSA685*016#1500 A 6.8 16 85 10 125 1.1 6 1500 0.224 0.201 0.089 1
TPSB685*016#0600 B 6.8 16 85 10 125 1.1 6 600 0.376 0.339 0.151 1
TPSB685*016#1200 B 6.8 16 85 10 125 1.1 6 1200 0.266 0.240 0.106 1
TPSA106*016#1000 A 10 16 85 10 125 1.6 6 1000 0.274 0.246 0.110 1
TPSB106*016#0500 B 10 16 85 10 125 1.6 6 500 0.412 0.371 0.165 1
TPSB106*016#0800 B 10 16 85 10 125 1.6 6 800 0.326 0.293 0.130 1
TPSC106*016#0500 C 10 16 85 10 125 1.6 6 500 0.469 0.422 0.188 1
TPST106*016#0800 T 10 16 85 10 125 1.6 8 800 0.316 0.285 0.126 1
TPST106*016#1000 T 10 16 85 10 125 1.6 8 1000 0.283 0.255 0.113 1
TPSW106*016#0500 W 10 16 85 10 125 1.6 6 500 0.424 0.382 0.170 1
TPSW106*016#0600 W 10 16 85 10 125 1.6 6 600 0.387 0.349 0.155 1
TPSB156*016#0500 B 15 16 85 10 125 2.4 6 500 0.412 0.371 0.165 1
TPSB156*016#0800 B 15 16 85 10 125 2.4 6 800 0.326 0.293 0.130 1
TPSC156*016#0300 C 15 16 85 10 125 2.4 6 300 0.606 0.545 0.242 1
TPSC156*016#0700 C 15 16 85 10 125 2.4 6 700 0.396 0.357 0.159 1
TPSB226*016#0400 B 22 16 85 10 125 3.5 6 400 0.461 0.415 0.184 1
TPSB226*016#0600 B 22 16 85 10 125 3.5 6 600 0.376 0.339 0.151 1
TPSC226*016#0150 C 22 16 85 10 125 3.5 6 150 0.856 0.771 0.343 1
TPSC226*016#0250 C 22 16 85 10 125 3.5 6 250 0.663 0.597 0.265 1
TPSC226*016#0300 C 22 16 85 10 125 3.5 6 300 0.606 0.545 0.242 1
TPSC226*016#0375 C 22 16 85 10 125 3.5 6 375 0.542 0.487 0.217 1
TPSD226*016#0700 D 22 16 85 10 125 3.5 6 700 0.463 0.417 0.185 11)
TPSW226*016#0500 W 22 16 85 10 125 3.5 6 500 0.424 0.382 0.170 1
TPSB336*016#0350 B 33 16 85 10 125 5.3 8 350 0.493 0.444 0.197 1
TPSB336*016#0500 B 33 16 85 10 125 5.3 8 500 0.412 0.371 0.165 1
TPSC336*016#0100 C 33 16 85 10 125 5.3 6 100 1.049 0.944 0.420 1
TPSC336*016#0150 C 33 16 85 10 125 5.3 6 150 0.856 0.771 0.343 1
041422

TPS Series
Low ESR
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TPSC336*016#0225 C 33 16 85 10 125 5.3 6 225 0.699 0.629 0.280 1
TPSC336*016#0300 C 33 16 85 10 125 5.3 6 300 0.606 0.545 0.242 1
TPSD336*016#0200 D 33 16 85 10 125 5.3 6 200 0.866 0.779 0.346 11)
TPSW336*016#0140 W 33 16 85 10 125 5.3 6 140 0.802 0.722 0.321 1
TPSW336*016#0175 W 33 16 85 10 125 5.3 6 175 0.717 0.645 0.287 1
TPSW336*016#0250 W 33 16 85 10 125 5.3 6 250 0.600 0.540 0.240 1
TPSW336*016#0400 W 33 16 85 10 125 5.3 6 400 0.474 0.427 0.190 1
TPSW336*016#0500 W 33 16 85 10 125 5.3 6 500 0.424 0.382 0.170 1
TPSY336*016#0300 Y 33 16 85 10 125 5.3 6 300 0.645 0.581 0.258 11)
TPSY336*016#0400 Y 33 16 85 10 125 5.3 6 400 0.559 0.503 0.224 11)
TPSC476*016#0110 C 47 16 85 10 125 7.5 6 110 1.000 0.900 0.400 1
TPSC476*016#0350 C 47 16 85 10 125 7.5 6 350 0.561 0.505 0.224 1
TPSD476*016#0080 D 47 16 85 10 125 7.5 6 80 1.369 1.232 0.548 11)
TPSD476*016#0100 D 47 16 85 10 125 7.5 6 100 1.225 1.102 0.490 11)
TPSD476*016#0150 D 47 16 85 10 125 7.5 6 150 1.000 0.900 0.400 11)
TPSD476*016#0200 D 47 16 85 10 125 7.5 6 200 0.866 0.779 0.346 11)
TPSW476*016#0200 W 47 16 85 10 125 7.5 6 200 0.671 0.604 0.268 1
TPSX476*016#0180 X 47 16 85 10 125 7.5 6 180 0.745 0.671 0.298 11)
TPSY476*016#0250 Y 47 16 85 10 125 7.5 6 250 0.707 0.636 0.283 11)
TPSC686*016#0125 C 68 16 85 10 125 10.9 6 125 0.938 0.844 0.375 1
TPSC686*016#0200 C 68 16 85 10 125 10.9 6 200 0.742 0.667 0.297 1
TPSD686*016#0070 D 68 16 85 10 125 10.9 6 70 1.464 1.317 0.586 11)
TPSD686*016#0100 D 68 16 85 10 125 10.9 6 100 1.225 1.102 0.490 11)
TPSD686*016#0150 D 68 16 85 10 125 10.9 6 150 1.000 0.900 0.400 11)
TPSF686*016#0200 F 68 16 85 10 125 10.9 10 200 0.707 0.636 0.283 1
TPSX686*016#0150 X 68 16 85 10 125 10.9 8 150 0.816 0.735 0.327 11)
TPSY686*016#0150 Y 68 16 85 10 125 10.9 6 150 0.913 0.822 0.365 11)
TPSY686*016#0200 Y 68 16 85 10 125 10.9 6 200 0.791 0.712 0.316 11)
TPSY686*016#0250 Y 68 16 85 10 125 10.9 6 250 0.707 0.636 0.283 11)
TPSC107*016#0200 C 100 16 85 10 125 16 8 200 0.742 0.667 0.297 1
TPSD107*016#0060 D 100 16 85 10 125 16 6 60 1.581 1.423 0.632 11)
TPSD107*016#0100 D 100 16 85 10 125 16 6 100 1.225 1.102 0.490 11)
TPSD107*016#0125 D 100 16 85 10 125 16 6 125 1.095 0.986 0.438 11)
TPSD107*016#0150 D 100 16 85 10 125 16 6 150 1.000 0.900 0.400 11)
TPSE107*016#0055 E 100 16 85 10 125 16 6 55 1.732 1.559 0.693 11)
TPSE107*016#0100 E 100 16 85 10 125 16 6 100 1.285 1.156 0.514 11)
TPSE107*016#0125 E 100 16 85 10 125 16 6 125 1.149 1.034 0.460 11)
TPSE107*016#0150 E 100 16 85 10 125 16 6 150 1.049 0.944 0.420 11)
TPSF107M016#0150 F 100 16 85 10 125 16 10 150 0.816 0.735 0.327 1
TPSF107M016#0200 F 100 16 85 10 125 16 10 200 0.707 0.636 0.283 1
TPSY107*016#0100 Y 100 16 85 10 125 16 8 100 1.118 1.006 0.447 11)
TPSY107*016#0150 Y 100 16 85 10 125 16 8 150 0.913 0.822 0.365 11)
TPSY107*016#0200 Y 100 16 85 10 125 16 8 200 0.791 0.712 0.316 11)
TPSD157*016#0060 D 150 16 85 10 125 24 6 60 1.581 1.423 0.632 11)
TPSD157*016#0085 D 150 16 85 10 125 24 6 85 1.328 1.196 0.531 11)
TPSD157*016#0100 D 150 16 85 10 125 24 6 100 1.225 1.102 0.490 11)
TPSD157*016#0125 D 150 16 85 10 125 24 6 125 1.095 0.986 0.438 11)
TPSD157*016#0150 D 150 16 85 10 125 24 6 150 1.000 0.900 0.400 11)
TPSE157*016#0050V E 150 16 85 10 125 24 8 50 1.817 1.635 0.727 3
TPSE157*016#0100 E 150 16 85 10 125 24 8 100 1.285 1.156 0.514 11)
TPSV157*016#0045 V 150 16 85 10 125 24 8 45 2.357 2.121 0.943 11)
TPSV157*016#0075 V 150 16 85 10 125 24 8 75 1.826 1.643 0.730 11)
TPSY157M016#0200 Y 150 16 85 10 125 24 15 200 0.791 0.712 0.316 11)
TPSD227M016#0200V D 220 16 85 10 125 35.2 10 200 0.866 0.779 0.346 3
TPSE227*016#0050V E 220 16 85 10 125 35.2 10 50 1.817 1.635 0.727 3
TPSE227*016#0100 E 220 16 85 10 125 35.2 10 100 1.285 1.156 0.514 11)
TPSE227*016#0150 E 220 16 85 10 125 35.2 10 150 1.049 0.944 0.420 11)
TPSV227*016#0050 V 220 16 85 10 125 35.2 8 50 2.236 2.012 0.894 11)
TPSV227*016#0075 V 220 16 85 10 125 35.2 8 75 1.826 1.643 0.730 11)
TPSV227*016#0100 V 220 16 85 10 125 35.2 8 100 1.581 1.423 0.632 11)
TPSV227*016#0150 V 220 16 85 10 125 35.2 8 150 1.291 1.162 0.516 11)
TPSE337M016#0200 E 330 16 85 10 125 52.8 30 200 0.908 0.817 0.363 11)
20 Volt @ 85°C
TPSA105*020#3000 A 1 20 85 13 125 0.5 4 3000 0.158 0.142 0.063 1
TPSR105*020#6000 R 1 20 85 13 125 0.5 4 6000 0.096 0.086 0.038 1
TPSS105*020#6000 S 1 20 85 13 125 0.5 4 6000 0.104 0.094 0.042 1
TPST105*020#2000 T 1 20 85 13 125 0.5 4 2000 0.200 0.180 0.080 1
TPSA155*020#3000 A 1.5 20 85 13 125 0.5 6 3000 0.158 0.142 0.063 1
TPSA225*020#3000 A 2.2 20 85 13 125 0.5 6 3000 0.158 0.142 0.063 1
TPSB225*020#1700 B 2.2 20 85 13 125 0.5 6 1700 0.224 0.201 0.089 1
TPSA335*020#2500 A 3.3 20 85 13 125 0.7 6 2500 0.173 0.156 0.069 1
TPSB335*020#1300 B 3.3 20 85 13 125 0.7 6 1300 0.256 0.230 0.102 1
TPSA475*020#1800 A 4.7 20 85 13 125 0.9 6 1800 0.204 0.184 0.082 1
TPSB475*020#0750 B 4.7 20 85 13 125 0.9 6 750 0.337 0.303 0.135 1
TPSB475*020#1000 B 4.7 20 85 13 125 0.9 6 1000 0.292 0.262 0.117 1
TPSA685*020#1000 A 6.8 20 85 13 125 1.4 6 1000 0.274 0.246 0.110 1
TPSB685*020#0600 B 6.8 20 85 13 125 1.4 6 600 0.376 0.339 0.151 1
TPSB685*020#1000 B 6.8 20 85 13 125 1.4 6 1000 0.292 0.262 0.117 1
TPSC685*020#0700 C 6.8 20 85 13 125 1.4 6 700 0.396 0.357 0.159 1
TPSB106*020#0500 B 10 20 85 13 125 2 6 500 0.412 0.371 0.165 1
TPSB106*020#1000 B 10 20 85 13 125 2 6 1000 0.292 0.262 0.117 1
040122

TPS Series
Low ESR
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TPSC106*020#0500 C 10 20 85 13 125 2 6 500 0.469 0.422 0.188 1
TPSC106*020#0700 C 10 20 85 13 125 2 6 700 0.396 0.357 0.159 1
TPSW106*020#0250 W 10 20 85 13 125 2 6 250 0.600 0.540 0.240 1
TPSW106*020#0500 W 10 20 85 13 125 2 6 500 0.424 0.382 0.170 1
TPSB156*020#0500 B 15 20 85 13 125 3 6 500 0.412 0.371 0.165 1
TPSC156*020#0400 C 15 20 85 13 125 3 6 400 0.524 0.472 0.210 1
TPSC156*020#0450 C 15 20 85 13 125 3 6 450 0.494 0.445 0.198 1
TPSB226*020#0400 B 22 20 85 13 125 4.4 6 400 0.461 0.415 0.184 1
TPSB226*020#0600 B 22 20 85 13 125 4.4 6 600 0.376 0.339 0.151 1
TPSC226*020#0100 C 22 20 85 13 125 4.4 6 100 1.049 0.944 0.420 1
TPSC226*020#0150 C 22 20 85 13 125 4.4 6 150 0.856 0.771 0.343 1
TPSC226*020#0400 C 22 20 85 13 125 4.4 6 400 0.524 0.472 0.210 1
TPSD226*020#0200 D 22 20 85 13 125 4.4 6 200 0.866 0.779 0.346 11)
TPSD226*020#0300 D 22 20 85 13 125 4.4 6 300 0.707 0.636 0.283 11)
TPSC336*020#0300 C 33 20 85 13 125 6.6 6 300 0.606 0.545 0.242 1
TPSD336*020#0100 D 33 20 85 13 125 6.6 6 100 1.225 1.102 0.490 11)
TPSD336*020#0200 D 33 20 85 13 125 6.6 6 200 0.866 0.779 0.346 11)
TPSD476*020#0075 D 47 20 85 13 125 9.4 6 75 1.414 1.273 0.566 11)
TPSD476*020#0100 D 47 20 85 13 125 9.4 6 100 1.225 1.102 0.490 11)
TPSD476*020#0200 D 47 20 85 13 125 9.4 6 200 0.866 0.779 0.346 11)
TPSE476*020#0070 E 47 20 85 13 125 9.4 6 70 1.535 1.382 0.614 11)
TPSE476*020#0125 E 47 20 85 13 125 9.4 6 125 1.149 1.034 0.460 11)
TPSE476*020#0150 E 47 20 85 13 125 9.4 6 150 1.049 0.944 0.420 11)
TPSE476*020#0200 E 47 20 85 13 125 9.4 6 200 0.908 0.817 0.363 11)
TPSE476*020#0250 E 47 20 85 13 125 9.4 6 250 0.812 0.731 0.325 11)
TPSX476*020#0200 X 47 20 85 13 125 9.4 6 200 0.707 0.636 0.283 11)
TPSD686*020#0070 D 68 20 85 13 125 13.6 6 70 1.464 1.317 0.586 11)
TPSD686*020#0150 D 68 20 85 13 125 13.6 6 150 1.000 0.900 0.400 11)
TPSD686*020#0200 D 68 20 85 13 125 13.6 6 200 0.866 0.779 0.346 11)
TPSD686*020#0300 D 68 20 85 13 125 13.6 6 300 0.707 0.636 0.283 11)
TPSE686*020#0125 E 68 20 85 13 125 13.6 6 125 1.149 1.034 0.460 11)
TPSE686*020#0150 E 68 20 85 13 125 13.6 6 150 1.049 0.944 0.420 11)
TPSE686*020#0200 E 68 20 85 13 125 13.6 6 200 0.908 0.817 0.363 11)
TPSY686*020#0200 Y 68 20 85 13 125 13.6 6 200 0.791 0.712 0.316 11)
TPSD107*020#0085 D 100 20 85 13 125 20 6 85 1.328 1.196 0.531 11)
TPSD107*020#0100 D 100 20 85 13 125 20 6 100 1.225 1.102 0.490 11)
TPSD107*020#0150 D 100 20 85 13 125 20 6 150 1.000 0.900 0.400 11)
TPSE107*020#0100 E 100 20 85 13 125 20 6 100 1.285 1.156 0.514 11)
TPSE107*020#0150 E 100 20 85 13 125 20 6 150 1.049 0.944 0.420 11)
TPSE107*020#0200 E 100 20 85 13 125 20 6 200 0.908 0.817 0.363 11)
TPSV107*020#0060 V 100 20 85 13 125 20 8 60 2.041 1.837 0.816 11)
TPSV107*020#0085 V 100 20 85 13 125 20 8 85 1.715 1.543 0.686 11)
TPSV107*020#0100 V 100 20 85 13 125 20 8 100 1.581 1.423 0.632 11)
TPSV107*020#0200 V 100 20 85 13 125 20 8 200 1.118 1.006 0.447 11)
TPSV157*020#0080 V 150 20 85 13 125 30 8 80 1.768 1.591 0.707 11)
@
25 Volt 85°C
TPSA474*025#7000 A 0.47 25 85 17 125 0.5 4 7000 0.104 0.093 0.041 1
TPSA684*025#6000 A 0.68 25 85 17 125 0.5 4 6000 0.112 0.101 0.045 1
TPSA105*025#4000 A 1 25 85 17 125 0.5 4 4000 0.137 0.123 0.055 1
TPSR105*025#2500 R 1 25 85 17 125 0.5 4 2500 0.148 0.133 0.059 1
TPSR105*025#4000 R 1 25 85 17 125 0.5 4 4000 0.117 0.106 0.047 1
TPSA155*025#3000 A 1.5 25 85 17 125 0.5 6 3000 0.158 0.142 0.063 1
TPSB155*025#1800 B 1.5 25 85 17 125 0.5 6 1800 0.217 0.196 0.087 1
TPSA225*025#2500 A 2.2 25 85 17 125 0.6 6 2500 0.173 0.156 0.069 1
TPSB225*025#0900 B 2.2 25 85 17 125 0.6 6 900 0.307 0.277 0.123 1
TPSB225*025#1200 B 2.2 25 85 17 125 0.6 6 1200 0.266 0.240 0.106 1
TPSB225*025#2500 B 2.2 25 85 17 125 0.6 6 2500 0.184 0.166 0.074 1
TPSA335*025#1000 A 3.3 25 85 17 125 0.8 6 1000 0.274 0.246 0.110 1
TPSA335*025#1500 A 3.3 25 85 17 125 0.8 6 1500 0.224 0.201 0.089 1
TPSB335*025#0750 B 3.3 25 85 17 125 0.8 6 750 0.337 0.303 0.135 1
TPSB335*025#1500 B 3.3 25 85 17 125 0.8 6 1500 0.238 0.214 0.095 1
TPSB335*025#2000 B 3.3 25 85 17 125 0.8 6 2000 0.206 0.186 0.082 1
TPSB475*025#0700 B 4.7 25 85 17 125 1.2 6 700 0.348 0.314 0.139 1
TPSB475*025#0900 B 4.7 25 85 17 125 1.2 6 900 0.307 0.277 0.123 1
TPSB475*025#1500 B 4.7 25 85 17 125 1.2 6 1500 0.238 0.214 0.095 1
TPSC475*025#0700 C 4.7 25 85 17 125 1.2 6 700 0.396 0.357 0.159 1
TPSB685*025#0700 B 6.8 25 85 17 125 1.7 6 700 0.348 0.314 0.139 1
TPSC685*025#0500 C 6.8 25 85 17 125 1.7 6 500 0.469 0.422 0.188 1
TPSC685*025#0600 C 6.8 25 85 17 125 1.7 6 600 0.428 0.385 0.171 1
TPSC685*025#0700 C 6.8 25 85 17 125 1.7 6 700 0.396 0.357 0.159 1
TPSB106*025#1800 B 10 25 85 17 125 2.5 6 1800 0.217 0.196 0.087 1
TPSC106*025#0300 C 10 25 85 17 125 2.5 6 300 0.606 0.545 0.242 1
TPSC106*025#0500 C 10 25 85 17 125 2.5 6 500 0.469 0.422 0.188 1
TPSD106*025#0500 D 10 25 85 17 125 2.5 6 500 0.548 0.493 0.219 11)
TPSC156*025#0220 C 15 25 85 17 125 3.8 6 220 0.707 0.636 0.283 1
TPSC156*025#0300 C 15 25 85 17 125 3.8 6 300 0.606 0.545 0.242 1
TPSD156*025#0100 D 15 25 85 17 125 3.8 6 100 1.225 1.102 0.490 11)
TPSD156*025#0300 D 15 25 85 17 125 3.8 6 300 0.707 0.636 0.283 11)
TPSC226*025#0275 C 22 25 85 17 125 5.5 6 275 0.632 0.569 0.253 1
TPSC226*025#0400 C 22 25 85 17 125 5.5 6 400 0.524 0.472 0.210 1
TPSD226*025#0100 D 22 25 85 17 125 5.5 6 100 1.225 1.102 0.490 11)
040122

TPS Series
Low ESR
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TPSD226*025#0200 D 22 25 85 17 125 5.5 6 200 0.866 0.779 0.346 11)
TPSD226*025#0300 D 22 25 85 17 125 5.5 6 300 0.707 0.636 0.283 11)
TPSF226*025#0300 F 22 25 85 17 125 5.5 6 300 0.577 0.520 0.231 1
TPSC336*025#0400 C 33 25 85 17 125 8.3 6 400 0.524 0.472 0.210 1
TPSD336*025#0100 D 33 25 85 17 125 8.3 6 100 1.225 1.102 0.490 11)
TPSD336*025#0200 D 33 25 85 17 125 8.3 6 200 0.866 0.779 0.346 11)
TPSD336*025#0300 D 33 25 85 17 125 8.3 6 300 0.707 0.636 0.283 11)
TPSE336*025#0100 E 33 25 85 17 125 8.3 6 100 1.285 1.156 0.514 11)
TPSE336*025#0175 E 33 25 85 17 125 8.3 6 175 0.971 0.874 0.388 11)
TPSE336*025#0200 E 33 25 85 17 125 8.3 6 200 0.908 0.817 0.363 11)
TPSE336*025#0300 E 33 25 85 17 125 8.3 6 300 0.742 0.667 0.297 11)
TPSF336*025#0150 F 33 25 85 17 125 8.3 6 150 0.816 0.735 0.327 11)
TPSF336*025#0200 F 33 25 85 17 125 8.3 6 200 0.707 0.636 0.283 1
TPSF336*025#0400 F 33 25 85 17 125 8.3 6 400 0.500 0.450 0.200 1
TPSY336*025#0200 Y 33 25 85 17 125 8.3 6 200 0.791 0.712 0.316 11)
TPSD476*025#0125 D 47 25 85 17 125 11.8 6 125 1.095 0.986 0.438 11)
TPSD476*025#0150 D 47 25 85 17 125 11.8 6 150 1.000 0.900 0.400 11)
TPSD476*025#0250 D 47 25 85 17 125 11.8 6 250 0.775 0.697 0.310 11)
TPSE476*025#0080 E 47 25 85 17 125 11.8 6 80 1.436 1.293 0.574 11)
TPSE476*025#0100 E 47 25 85 17 125 11.8 6 100 1.285 1.156 0.514 11)
TPSE476*025#0125 E 47 25 85 17 125 11.8 6 125 1.149 1.034 0.460 11)
TPSY476*025#0250 Y 47 25 85 17 125 11.8 6 250 0.707 0.636 0.283 11)
TPSD686*025#0150 D 68 25 85 17 125 17 6 150 1.000 0.900 0.400 11)
TPSD686*025#0200 D 68 25 85 17 125 17 6 200 0.866 0.779 0.346 11)
TPSD686*025#0300 D 68 25 85 17 125 17 6 300 0.707 0.636 0.283 11)
TPSE686*025#0125 E 68 25 85 17 125 17 6 125 1.149 1.034 0.460 11)
TPSE686*025#0200 E 68 25 85 17 125 17 6 200 0.908 0.817 0.363 11)
TPSV686*025#0080 V 68 25 85 17 125 17 6 80 1.768 1.591 0.707 11)
TPSV686*025#0095 V 68 25 85 17 125 17 6 95 1.622 1.460 0.649 11)
TPSV686*025#0150 V 68 25 85 17 125 17 6 150 1.291 1.162 0.516 11)
TPSV686*025#0200 V 68 25 85 17 125 17 6 200 1.118 1.006 0.447 11)
TPSE107*025#0150 E 100 25 85 17 125 25 10 150 1.049 0.944 0.420 11)
TPSV107*025#0100 V 100 25 85 17 125 25 8 100 1.581 1.423 0.632 11)
TPSV157M025#0150 V 150 25 85 17 125 37.5 10 150 1.291 1.162 0.516 11)
@
35 Volt 85°C
TPSA224*035#6000 A 0.22 35 85 23 125 0.5 4 6000 0.112 0.101 0.045 1
TPSA334*035#6000 A 0.33 35 85 23 125 0.5 4 6000 0.112 0.101 0.045 1
TPSA474*035#6000 A 0.47 35 85 23 125 0.5 4 6000 0.112 0.101 0.045 1
TPSB474*035#4000 B 0.47 35 85 23 125 0.5 4 4000 0.146 0.131 0.058 1
TPSA684*035#6000 A 0.68 35 85 23 125 0.5 4 6000 0.112 0.101 0.045 1
TPSA105*035#3000 A 1 35 85 23 125 0.5 4 3000 0.158 0.142 0.063 1
TPSB105*035#2000 B 1 35 85 23 125 0.5 4 2000 0.206 0.186 0.082 1
TPSA155*035#3000 A 1.5 35 85 23 125 0.5 6 3000 0.158 0.142 0.063 1
TPSB155*035#2500 B 1.5 35 85 23 125 0.5 6 2500 0.184 0.166 0.074 1
TPSA225*035#1500 A 2.2 35 85 23 125 0.8 6 1500 0.224 0.201 0.089 1
TPSB225*035#0750 B 2.2 35 85 23 125 0.8 6 750 0.337 0.303 0.135 1
TPSB225*035#1500 B 2.2 35 85 23 125 0.8 6 1500 0.238 0.214 0.095 1
TPSB225*035#2000 B 2.2 35 85 23 125 0.8 6 2000 0.206 0.186 0.082 1
TPSC225*035#1000 C 2.2 35 85 23 125 0.8 6 1000 0.332 0.298 0.133 1
TPSB335*035#1000 B 3.3 35 85 23 125 1.2 6 1000 0.292 0.262 0.117 1
TPSC335*035#0700 C 3.3 35 85 23 125 1.2 6 700 0.396 0.357 0.159 1
TPSB475*035#0700 B 4.7 35 85 23 125 1.6 6 700 0.348 0.314 0.139 1
TPSB475*035#1500 B 4.7 35 85 23 125 1.6 6 1500 0.238 0.214 0.095 1
TPSC475*035#0600 C 4.7 35 85 23 125 1.6 6 600 0.428 0.385 0.171 1
TPSD475*035#0700 D 4.7 35 85 23 125 1.6 6 700 0.463 0.417 0.185 11)
TPSC685*035#0350 C 6.8 35 85 23 125 2.4 6 350 0.561 0.505 0.224 1
TPSD685*035#0150 D 6.8 35 85 23 125 2.4 6 150 1.000 0.900 0.400 11)
TPSD685*035#0400 D 6.8 35 85 23 125 2.4 6 400 0.612 0.551 0.245 11)
TPSD685*035#0500 D 6.8 35 85 23 125 2.4 6 500 0.548 0.493 0.219 11)
TPSC106*035#0600 C 10 35 85 23 125 3.5 6 600 0.428 0.385 0.171 1
TPSD106*035#0125 D 10 35 85 23 125 3.5 6 125 1.095 0.986 0.438 11)
TPSD106*035#0300 D 10 35 85 23 125 3.5 6 300 0.707 0.636 0.283 11)
TPSE106*035#0100V E 10 35 85 23 125 3.5 6 100 1.285 1.156 0.514 3
TPSE106*035#0150V E 10 35 85 23 125 3.5 6 150 1.049 0.944 0.420 3
TPSE106*035#0200 E 10 35 85 23 125 3.5 6 200 0.908 0.817 0.363 11)
TPSY106*035#0250 Y 10 35 85 23 125 3.5 6 250 0.707 0.636 0.283 11)
TPSC156*035#0350 C 15 35 85 23 125 5.3 6 350 0.561 0.505 0.224 1
TPSC156*035#0450 C 15 35 85 23 125 5.3 6 450 0.494 0.445 0.198 1
TPSD156*035#0100 D 15 35 85 23 125 5.3 6 100 1.225 1.102 0.490 11)
TPSD156*035#0300 D 15 35 85 23 125 5.3 6 300 0.707 0.636 0.283 11)
TPSY156*035#0250 Y 15 35 85 23 125 5.3 6 250 0.707 0.636 0.283 11)
TPSD226*035#0125 D 22 35 85 23 125 7.7 6 125 1.095 0.986 0.438 11)
TPSD226*035#0200 D 22 35 85 23 125 7.7 6 200 0.866 0.779 0.346 11)
TPSD226*035#0300 D 22 35 85 23 125 7.7 6 300 0.707 0.636 0.283 11)
TPSD226*035#0400 D 22 35 85 23 125 7.7 6 400 0.612 0.551 0.245 11)
TPSE226*035#0125 E 22 35 85 23 125 7.7 6 125 1.149 1.034 0.460 11)
TPSE226*035#0200 E 22 35 85 23 125 7.7 6 200 0.908 0.817 0.363 11)
TPSE226*035#0300 E 22 35 85 23 125 7.7 6 300 0.742 0.667 0.297 11)
TPSY226*035#0200 Y 22 35 85 23 125 7.7 6 200 0.791 0.712 0.316 11)
TPSD336*035#0200 D 33 35 85 23 125 11.6 6 200 0.866 0.779 0.346 11)
TPSD336*035#0300 D 33 35 85 23 125 11.6 6 300 0.707 0.636 0.283 11)
041422

TPS Series
Low ESR
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TPSE336*035#0100 E 33 35 85 23 125 11.6 6 100 1.285 1.156 0.514 11)
TPSE336*035#0250 E 33 35 85 23 125 11.6 6 250 0.812 0.731 0.325 11)
TPSE336*035#0300 E 33 35 85 23 125 11.6 6 300 0.742 0.667 0.297 11)
TPSV336*035#0200 V 33 35 85 23 125 11.6 6 200 1.118 1.006 0.447 11)
TPSD476*035#0300V D 47 35 85 23 125 16.5 6 300 0.707 0.636 0.283 3
TPSE476*035#0200 E 47 35 85 23 125 16.5 6 200 0.908 0.817 0.363 11)
TPSE476*035#0250 E 47 35 85 23 125 16.5 6 250 0.812 0.731 0.325 11)
TPSV476*035#0150 V 47 35 85 23 125 16.5 6 150 1.291 1.162 0.516 11)
TPSV476*035#0200 V 47 35 85 23 125 16.5 6 200 1.118 1.006 0.447 11)
TPSV686*035#0150 V 68 35 85 23 125 23.8 6 150 1.291 1.162 0.516 11)
TPSV686*035#0200 V 68 35 85 23 125 23.8 6 200 1.118 1.006 0.447 11)
50 Volt @ 85°C
TPSA154*050#9000 A 0.15 50 85 33 125 0.5 4 9000 0.091 0.082 0.037 1
TPSA224*050#7000 A 0.22 50 85 33 125 0.5 4 7000 0.104 0.093 0.041 1
TPSA334*050#7000 A 0.33 50 85 33 125 0.5 4 7000 0.104 0.093 0.041 1
TPSA474*050#6500 A 0.47 50 85 33 125 0.5 4 6500 0.107 0.097 0.043 1
TPSB474*050#6000 B 0.47 50 85 33 125 0.5 4 6000 0.119 0.107 0.048 1
TPSC474*050#2300 C 0.47 50 85 33 125 0.5 4 2300 0.219 0.197 0.087 1
TPSB684*050#4000 B 0.68 50 85 33 125 0.5 4 4000 0.146 0.131 0.058 1
TPSB105*050#3000 B 1 50 85 33 125 0.5 6 3000 0.168 0.151 0.067 1
TPSC105*050#2500 C 1 50 85 33 125 0.5 4 2500 0.210 0.189 0.084 1
TPSC155*050#1500 C 1.5 50 85 33 125 0.8 6 1500 0.271 0.244 0.108 1
TPSC155*050#2000 C 1.5 50 85 33 125 0.8 6 2000 0.235 0.211 0.094 1
TPSC225*050#1500 C 2.2 50 85 33 125 1.1 8 1500 0.271 0.244 0.108 1
TPSD225*050#1200 D 2.2 50 85 33 125 1.1 6 1200 0.354 0.318 0.141 11)
TPSC335*050#1000 C 3.3 50 85 33 125 1.6 6 1000 0.332 0.298 0.133 1
TPSD335*050#0800 D 3.3 50 85 33 125 1.7 6 800 0.433 0.390 0.173 11)
TPSC475*050#0800 C 4.7 50 85 33 125 2.4 6 800 0.371 0.334 0.148 1
TPSD475*050#0250 D 4.7 50 85 33 125 2.4 6 250 0.775 0.697 0.310 11)
TPSD475*050#0300 D 4.7 50 85 33 125 2.4 6 300 0.707 0.636 0.283 11)
TPSD475*050#0500 D 4.7 50 85 33 125 2.4 6 500 0.548 0.493 0.219 11)
TPSD475*050#0700 D 4.7 50 85 33 125 2.4 6 700 0.463 0.417 0.185 11)
TPSX475*050#0500V X 4.7 50 85 33 125 2.4 6 500 0.447 0.402 0.179 3
TPSD685*050#0200 D 6.8 50 85 33 125 3.4 6 200 0.866 0.779 0.346 11)
TPSD685*050#0300 D 6.8 50 85 33 125 3.4 6 300 0.707 0.636 0.283 11)
TPSD685*050#0500 D 6.8 50 85 33 125 3.4 6 500 0.548 0.493 0.219 11)
TPSD685*050#0600 D 6.8 50 85 33 125 3.4 6 600 0.500 0.450 0.200 11)
TPSD106*050#0500 D 10 50 85 33 125 5 6 500 0.548 0.493 0.219 11)
TPSE106*050#0250 E 10 50 85 33 125 5 6 250 0.812 0.731 0.325 11)
TPSE106*050#0300 E 10 50 85 33 125 5 6 300 0.742 0.667 0.297 11)
11) –Dry pack option (see How to order) is recommended for reduction of stress during soldering. DCL ismeasured at rated voltage after 5 minutes.
Dry pack parts should be treated as MSL 3. The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement
For AEC-Q200 availability, please contact KYOCERA AVX. to 1.25 times catalogue limit post mounting.
Moisture Sensitivity Level (MSL) is defined according to J-STD-020 For typical weight and composition see page 259.
All technical data relates to an ambient temperature of +25°C. Capacitance and NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings or tighter tolerance part
DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. in the same case size, to the same reliability standards.
040122

TPS Series
Low ESR
QUALIFICATION TABLE
TPS series (Temperature range -55ºC to +125ºC)
TEST
Apply rated voltage (Ur) at 85ºC and / or category voltage
DCL 1.5 x initial limit
(Uc) at 125ºC for 2000 hours through a circuit impedance
Endurance ΔC/C within ±10% of initial value
of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours
DF initial limit
before measuring.
ESR 1.25 x initial limit
Store at 65ºC and 95% relative humidity for 500 hours, DCL 1.5 x initial limit
Humidity with no applied voltage. Stabilize at room temperature ΔC/C within ±10% of initial value
and humidity for 1-2 hours before measuring. DF 1.2 x initial limit
1 +20 15
2 -55 15
Stability 4 +85 15 DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL*
5 +125 15
6 +20 15 ESR 1.25 x IL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL*
Apply 1.3x category voltage (Uc) at 125ºC for 1000
DCL initial limit
Surge cycles of duration 6 min (30 sec charge, 5 min 30 sec
Voltage discharge) through a charge / discharge resistance of
DF initial limit
1000Ω
DCL initial limit
Mechanical
Shock
DF initial limit
ESR initial limit
DCL initial limit
DF initial limit
ESR initial limit
*Initial Limit
040120

TPS Series
Low ESR
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

TPS Series – Automotive Product Range
TPS Automotive Range

Low ESR - Automotive Product Range
FEATURES
• Low ESR Series of Robust Mn02
Solid Electrolyte Capacitors
• CV Range: 0.22-680μF / 6.3-50V LEAD-FREE COMPATIBLE
COMPONENT
APPLICATIONS
• Power Supply
• Electric Window Control
• Battery Management Systems
• DC / DC Converter
MARKING CASE DIMENSIONS: millimeters (inches)

A, B, C, D, E CASE Code
EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
S Min.
LOGO
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
227 = 220µF
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
Polarity
A = 10V
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
(Anode+)
XXXXX ID Code C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
HOW TO ORDER
TPS C 107 M 010 T 0150 V
Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging ESR in mΩ Dry Pack
See table pF code: 1st two digits K = ±10% 006 = 6.3Vdc 025 = 25Vdc T = Automotive Lead Option
above represent significant M = ±20% 010 = 10Vdc 035 = 35Vdc Free 7" Reel (D,E case sizes
figures, 3rd digit 016 = 16Vdc 050 = 50Vdc U = Automotive Lead mandatory)
represents multiplier 020 = 20Vdc Free 13" Reel
(number of zeros to
follow)
102020

TPS AUTOMOTIVE RANGE CAPACITANCE AND RATED VOLTAGE RANGE
0.15 154
0.22 224 A(7000)
0.33 334 A(6000) A(7000)
0.47 474 A(7000) A(6000) A(6500), B(6000)
0.68 684 A(6000) A(6000) B(4000)
1.0 105 A(6200) A(3000) A(4000) A(3000), B(2000) B(3000), C(2500)
1.5 155 A(3000) A(3000) A(3000), B(2500) C(1500,2000)
A(3000) A(2500) B(750,1500,2000) C(1500)
2.2 225 A(1800) A(1800,3500)
B(1700) B(900,1200,2500) C(1000) D(1200)
3.3 335 A(2100) A(3500), B(2500) A(2500), B(1300) B(750,1500,2000) B(1000), C(700) C(1000), D(800)
A(1400) A(2000) A(1800) B(700,900) B(700,1500), C(600) C(800)
4.7 475
B(1400) B(800,1500) B(750,1000) C(700) D(700) D(250,500,700)
A(1500), B(700),
6.8 685 A(1800), B(1300) B(600,1000), C(700) C(350), D(400,500) D(500,600)
B(600,1200) C(500,600,700)
A(1000), B(500,800) B(500,1000) B(1800), C(300,500) C(600) D(500)

10 106 A(1500), B(1500) A(900,1800), B(1000)
C(500) C(500,700) D(500) D(300) E(250,300,400,500)
A(1000), B(450,600) B(500,800) B(500) C(220,300)

15 156 A(700,1500) D(300) E(250)
C(700) C(300,700) C(400,450) D(300)
B(400,600),
A(300,500,900) A(900), B(400,500,700) B(400,600), C(400) C(275,400) D(200,300,400)
22 226 C(300,375) D(500),
B(375,600), C(500) C(180,300) D(200,300) D(200,300) E(200,300)
D(700)
B(500), C(150,
A(600) B(250,425,500,650) C(300) D(200,300)
33 336 225,300) D(200,300)
B(250,350,450,600) C(375,500) D(160,200) E(250,300)
D(200)
B(250,350,500) B(250,350,500,650) C(350) D(125,150,250)

47 476 D(200) E(200,250)
C(300) C(200,350), D(100,300) D(100,200) E(125)
B(250,350,500) C(200,300) C(200) D(150,200,300)

68 686 E(200)
C(150,200) D(150) D(150) E(125,150,200)
B(250,400) C(100,150,200) D(80,100,125,150)
100 107 E(100,150,200) E(150)
C(150), D(300) D(100,125,150) E(100,125,150)
C(100,150,200,250) D(85,100)
150 157 E(100)
D(125) E(100)
D(100,150)
220 227 D(100,125) E(100,150)
E(70,100,125,150)
D(45,50,70,100)
330 337 E(50,60,100)
E(100,125,150)
D(45,60,100,200)
470 477
E(45,50,60,100,200)
680 687 E(45,60,100)
020521

Rated Rated Category Category DCL DF ESR Max.
Case Capacitance 100kHz RMS Current (A)
Size (μF)
(V) (ºC) (V) (ºC) (μA) (%) (mΩ) 25ºC 85ºC 125ºC
6.3 Volt @ 85°C
TPSA335*006T2100 A 3.3 6.3 85 4 125 0.5 6 2100 0.189 0.170 0.076 1
TPSA106*006T1500 A 10 6.3 85 4 125 0.6 6 1500 0.224 0.201 0.089 1
TPSB106*006T1500 B 10 6.3 85 4 125 0.6 6 1500 0.238 0.214 0.095 1
TPSA156*006T0700 A 15 6.3 85 4 125 0.9 6 700 0.327 0.295 0.131 1
TPSA156*006T1500 A 15 6.3 85 4 125 0.9 6 1500 0.224 0.201 0.089 1
TPSA226*006T0300 A 22 6.3 85 4 125 1.4 6 300 0.500 0.450 0.200 1
TPSA226*006T0500 A 22 6.3 85 4 125 1.4 6 500 0.387 0.349 0.155 1
TPSA226*006T0900 A 22 6.3 85 4 125 1.4 6 900 0.289 0.260 0.115 1
TPSB226*006T0375 B 22 6.3 85 4 125 1.4 6 375 0.476 0.428 0.190 1
TPSB226*006T0600 B 22 6.3 85 4 125 1.4 6 600 0.376 0.339 0.151 1
TPSC226*006T0500 C 22 6.3 85 4 125 1.4 6 500 0.469 0.422 0.188 1
TPSA336*006T0600 A 33 6.3 85 4 125 2.1 8 600 0.354 0.318 0.141 1
TPSB336*006T0250 B 33 6.3 85 4 125 2.1 6 250 0.583 0.525 0.233 1
TPSB336*006T0350 B 33 6.3 85 4 125 2.1 6 350 0.493 0.444 0.197 1
TPSB336*006T0450 B 33 6.3 85 4 125 2.1 6 450 0.435 0.391 0.174 1
TPSB336*006T0600 B 33 6.3 85 4 125 2.1 6 600 0.376 0.339 0.151 1
TPSB476*006T0250 B 47 6.3 85 4 125 3 6 250 0.583 0.525 0.233 1
TPSB476*006T0350 B 47 6.3 85 4 125 3 6 350 0.493 0.444 0.197 1
TPSB476*006T0500 B 47 6.3 85 4 125 3 6 500 0.412 0.371 0.165 1
TPSC476*006T0300 C 47 6.3 85 4 125 3 6 300 0.606 0.545 0.242 1
TPSB686*006T0250 B 68 6.3 85 4 125 4 8 250 0.583 0.525 0.233 1
TPSB686*006T0350 B 68 6.3 85 4 125 4 8 350 0.493 0.444 0.197 1
TPSB686*006T0500 B 68 6.3 85 4 125 4 8 500 0.412 0.371 0.165 1
TPSC686*006T0150 C 68 6.3 85 4 125 4.3 6 150 0.856 0.771 0.343 1
TPSC686*006T0200 C 68 6.3 85 4 125 4.3 6 200 0.742 0.667 0.297 1
TPSB107*006T0250 B 100 6.3 85 4 125 6.3 10 250 0.583 0.525 0.233 1
TPSB107*006T0400 B 100 6.3 85 4 125 6.3 10 400 0.461 0.415 0.184 1
TPSC107*006T0150 C 100 6.3 85 4 125 6.3 6 150 0.856 0.771 0.343 1
TPSD107*006T0300V D 100 6.3 85 4 125 6.3 6 300 0.707 0.636 0.283 3
TPSC157*006T0100 C 150 6.3 85 4 125 9.5 6 100 1.049 0.944 0.420 1
TPSC157*006T0150 C 150 6.3 85 4 125 9.5 6 150 0.856 0.771 0.343 1
TPSC157*006T0200 C 150 6.3 85 4 125 9.5 6 200 0.742 0.667 0.297 1
TPSC157*006T0250 C 150 6.3 85 4 125 9.5 6 250 0.663 0.597 0.265 1
TPSD157*006T0125V D 150 6.3 85 4 125 9.5 6 125 1.095 0.986 0.438 3
TPSD227*006T0100V D 220 6.3 85 4 125 13.9 8 100 1.225 1.102 0.490 3
TPSD227*006T0125V D 220 6.3 85 4 125 13.9 8 125 1.095 0.986 0.438 3
TPSD337*006T0045V D 330 6.3 85 4 125 20.8 8 45 1.826 1.643 0.730 3
TPSD337*006T0050V D 330 6.3 85 4 125 20.8 8 50 1.732 1.559 0.693 3
TPSD337*006T0070V D 330 6.3 85 4 125 20.8 8 70 1.464 1.317 0.586 3
TPSD337*006T0100V D 330 6.3 85 4 125 20.8 8 100 1.225 1.102 0.490 3
TPSE337*006T0100V E 330 6.3 85 4 125 20.8 8 100 1.285 1.156 0.514 3
TPSE337*006T0125V E 330 6.3 85 4 125 20.8 8 125 1.149 1.034 0.460 3
TPSE337*006T0150V E 330 6.3 85 4 125 20.8 8 150 1.049 0.944 0.420 3
TPSD477*006T0045V D 470 6.3 85 4 125 28 12 45 1.826 1.643 0.730 3
TPSD477*006T0060V D 470 6.3 85 4 125 28 12 60 1.581 1.423 0.632 3
TPSD477*006T0100V D 470 6.3 85 4 125 28 12 100 1.225 1.102 0.490 3
TPSD477*006T0200V D 470 6.3 85 4 125 28 12 200 0.866 0.779 0.346 3
TPSE477*006T0045V E 470 6.3 85 4 125 28 10 45 1.915 1.723 0.766 3
TPSE477*006T0050V E 470 6.3 85 4 125 28 10 50 1.817 1.635 0.727 3
TPSE477*006T0060V E 470 6.3 85 4 125 28 10 60 1.658 1.492 0.663 3
TPSE477*006T0100V E 470 6.3 85 4 125 28 10 100 1.285 1.156 0.514 3
TPSE477*006T0200V E 470 6.3 85 4 125 28 10 200 0.908 0.817 0.363 3
TPSE687*006T0045V E 680 6.3 85 4 125 42.8 10 45 1.915 1.723 0.766 3
TPSE687*006T0060V E 680 6.3 85 4 125 42.8 10 60 1.658 1.492 0.663 3
TPSE687*006T0100V E 680 6.3 85 4 125 42.8 10 100 1.285 1.156 0.514 3
10 Volt @ 85°C
TPSA225*010T1800 A 2.2 10 85 7 125 0.5 6 1800 0.204 0.184 0.082 1
TPSA475*010T1400 A 4.7 10 85 7 125 0.5 6 1400 0.231 0.208 0.093 1
TPSB475*010T1400 B 4.7 10 85 7 125 0.5 6 1400 0.246 0.222 0.099 1
TPSA685*010T1800 A 6.8 10 85 7 125 0.7 6 1800 0.204 0.184 0.082 1
TPSB685*010T1300 B 6.8 10 85 7 125 0.7 6 1300 0.256 0.230 0.102 1
TPSA106*010T0900 A 10 10 85 7 125 1 6 900 0.289 0.260 0.115 1
TPSA106*010T1800 A 10 10 85 7 125 1 6 1800 0.204 0.184 0.082 1
TPSB106*010T1000 B 10 10 85 7 125 1 6 1000 0.292 0.262 0.117 1
TPSA156*010T1000 A 15 10 85 7 125 1.5 6 1000 0.274 0.246 0.110 1
TPSB156*010T0450 B 15 10 85 7 125 1.5 6 450 0.435 0.391 0.174 1
TPSB156*010T0600 B 15 10 85 7 125 1.5 6 600 0.376 0.339 0.151 1
Please use specific PN for automotive version – see “HOW TO ORDER”. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.
081821

Size (μF)
TPSC156*010T0700 C 15 10 85 7 125 1.5 6 700 0.396 0.357 0.159 1
TPSA226*010T0900 A 22 10 85 7 125 2.2 8 900 0.289 0.260 0.115 1
TPSB226*010T0400 B 22 10 85 7 125 2.2 6 400 0.461 0.415 0.184 1
TPSB226*010T0500 B 22 10 85 7 125 2.2 6 500 0.412 0.371 0.165 1
TPSB226*010T0700 B 22 10 85 7 125 2.2 6 700 0.348 0.314 0.139 1
TPSC226*010T0180 C 22 10 85 7 125 2.2 6 180 0.782 0.704 0.313 1
TPSC226*010T0300 C 22 10 85 7 125 2.2 6 300 0.606 0.545 0.242 1
TPSB336*010T0250 B 33 10 85 7 125 3.3 6 250 0.583 0.525 0.233 1
TPSB336*010T0425 B 33 10 85 7 125 3.3 6 425 0.447 0.402 0.179 1
TPSB336*010T0500 B 33 10 85 7 125 3.3 6 500 0.412 0.371 0.165 1
TPSB336*010T0650 B 33 10 85 7 125 3.3 6 650 0.362 0.325 0.145 1
TPSC336*010T0375 C 33 10 85 7 125 3.3 6 375 0.542 0.487 0.217 1
TPSC336*010T0500 C 33 10 85 7 125 3.3 6 500 0.469 0.422 0.188 1
TPSB476*010T0250 B 47 10 85 7 125 4.7 8 250 0.583 0.525 0.233 1
TPSB476*010T0350 B 47 10 85 7 125 4.7 8 350 0.493 0.444 0.197 1
TPSB476*010T0500 B 47 10 85 7 125 4.7 8 500 0.412 0.371 0.165 1
TPSB476*010T0650 B 47 10 85 7 125 4.7 8 650 0.362 0.325 0.145 1
TPSC476*010T0200 C 47 10 85 7 125 4.7 6 200 0.742 0.667 0.297 1
TPSC476*010T0350 C 47 10 85 7 125 4.7 6 350 0.561 0.505 0.224 1
TPSD476*010T0100V D 47 10 85 7 125 4.7 6 100 1.225 1.102 0.490 3
TPSD476*010T0300V D 47 10 85 7 125 4.7 6 300 0.707 0.636 0.283 3
TPSC686*010T0200 C 68 10 85 7 125 6.8 6 200 0.742 0.667 0.297 1
TPSC686*010T0300 C 68 10 85 7 125 6.8 6 300 0.606 0.545 0.242 1
TPSD686*010T0150V D 68 10 85 7 125 6.8 6 150 1.000 0.900 0.400 3
TPSC107*010T0100 C 100 10 85 7 125 10 8 100 1.049 0.944 0.420 1
TPSC107*010T0150 C 100 10 85 7 125 10 8 150 0.856 0.771 0.343 1
TPSC107*010T0200 C 100 10 85 7 125 10 8 200 0.742 0.667 0.297 1
TPSD107*010T0100V D 100 10 85 7 125 10 6 100 1.225 1.102 0.490 3
TPSD107*010T0125V D 100 10 85 7 125 10 6 125 1.095 0.986 0.438 3
TPSD107*010T0150V D 100 10 85 7 125 10 6 150 1.000 0.900 0.400 3
TPSD157*010T0085V D 150 10 85 7 125 15 8 85 1.328 1.196 0.531 3
TPSD157*010T0100V D 150 10 85 7 125 15 8 100 1.225 1.102 0.490 3
TPSE157*010T0100V E 150 10 85 7 125 15 8 100 1.285 1.156 0.514 3
TPSD227*010T0100V D 220 10 85 7 125 22 8 100 1.225 1.102 0.490 3
TPSD227*010T0150V D 220 10 85 7 125 22 8 150 1.000 0.900 0.400 3
TPSE227*010T0070V E 220 10 85 7 125 22 8 70 1.535 1.382 0.614 3
TPSE227*010T0100V E 220 10 85 7 125 22 8 100 1.285 1.156 0.514 3
TPSE227*010T0125V E 220 10 85 7 125 22 8 125 1.149 1.034 0.460 3
TPSE227*010T0150V E 220 10 85 7 125 22 8 150 1.049 0.944 0.420 3
TPSE337*010T0050V E 330 10 85 7 125 33 8 50 1.817 1.635 0.727 3
TPSE337*010T0060V E 330 10 85 7 125 33 8 60 1.658 1.492 0.663 3
TPSE337*010T0100V E 330 10 85 7 125 33 8 100 1.285 1.156 0.514 3
16 Volt @ 85°C
TPSA105*016T6200 A 1.0 16 85 10 125 0.5 4 6200 0.110 0.099 0.044 1
TPSA225*016T1800 A 2.2 16 85 10 125 0.5 6 1800 0.204 0.184 0.082 1
TPSA225*016T3500 A 2.2 16 85 10 125 0.5 6 3500 0.146 0.132 0.059 1
TPSA335*016T3500 A 3.3 16 85 10 125 0.5 6 3500 0.146 0.132 0.059 1
TPSB335*016T2500 B 3.3 16 85 10 125 0.5 6 2500 0.184 0.166 0.074 1
TPSA475*016T2000 A 4.7 16 85 10 125 0.8 6 2000 0.194 0.174 0.077 1
TPSB475*016T0800 B 4.7 16 85 10 125 0.8 6 800 0.326 0.293 0.130 1
TPSB475*016T1500 B 4.7 16 85 10 125 0.8 6 1500 0.238 0.214 0.095 1
TPSA685*016T1500 A 6.8 16 85 10 125 1.1 6 1500 0.224 0.201 0.089 1
TPSB685*016T0600 B 6.8 16 85 10 125 1.1 6 600 0.376 0.339 0.151 1
TPSB685*016T1200 B 6.8 16 85 10 125 1.1 6 1200 0.266 0.240 0.106 1
TPSA106*016T1000 A 10 16 85 10 125 1.6 6 1000 0.274 0.246 0.110 1
TPSB106*016T0500 B 10 16 85 10 125 1.6 6 500 0.412 0.371 0.165 1
TPSB106*016T0800 B 10 16 85 10 125 1.6 6 800 0.326 0.293 0.130 1
TPSC106*016T0500 C 10 16 85 10 125 1.6 6 500 0.469 0.422 0.188 1
TPSB156*016T0500 B 15 16 85 10 125 2.4 6 500 0.412 0.371 0.165 1
TPSB156*016T0800 B 15 16 85 10 125 2.4 6 800 0.326 0.293 0.130 1
TPSC156*016T0300 C 15 16 85 10 125 2.4 6 300 0.606 0.545 0.242 1
TPSC156*016T0700 C 15 16 85 10 125 2.4 6 700 0.396 0.357 0.159 1
TPSB226*016T0400 B 22 16 85 10 125 3.5 6 400 0.461 0.415 0.184 1
TPSB226*016T0600 B 22 16 85 10 125 3.5 6 600 0.376 0.339 0.151 1
TPSC226*016T0300 C 22 16 85 10 125 3.5 6 300 0.606 0.545 0.242 1
TPSC226*016T0375 C 22 16 85 10 125 3.5 6 375 0.542 0.487 0.217 1
TPSD226*016T0500V D 22 16 85 10 125 3.5 6 500 0.548 0.493 0.219 3
TPSD226*016T0700V D 22 16 85 10 125 3.5 6 700 0.463 0.417 0.185 3
TPSB336*016T0500 B 33 16 85 10 125 5.3 8 500 0.412 0.371 0.165 1
TPSC336*016T0150 C 33 16 85 10 125 5.3 6 150 0.856 0.771 0.343 1
TPSC336*016T0225 C 33 16 85 10 125 5.3 6 225 0.699 0.629 0.280 1
TPSC336*016T0300 C 33 16 85 10 125 5.3 6 300 0.606 0.545 0.242 1
072821

Size (μF)
TPSD336*016T0200V D 33 16 85 10 125 5.3 6 200 0.866 0.779 0.346 3
TPSC476*016T0350 C 47 16 85 10 125 7.5 6 350 0.561 0.505 0.224 1
TPSD476*016T0100V D 47 16 85 10 125 7.5 6 100 1.225 1.102 0.490 3
TPSD476*016T0200V D 47 16 85 10 125 7.5 6 200 0.866 0.779 0.346 3
TPSC686*016T0200 C 68 16 85 10 125 10.9 6 200 0.742 0.667 0.297 1
TPSD686*016T0150V D 68 16 85 10 125 10.9 6 150 1.000 0.900 0.400 3
TPSD107*016T0080V D 100 16 85 10 125 16 6 80 1.369 1.232 0.548 3
TPSD107*016T0100V D 100 16 85 10 125 16 6 100 1.225 1.102 0.490 3
TPSD107*016T0125V D 100 16 85 10 125 16 6 125 1.095 0.986 0.438 3
TPSD107*016T0150V D 100 16 85 10 125 16 6 150 1.000 0.900 0.400 3
TPSE107*016T0100V E 100 16 85 10 125 16 6 100 1.285 1.156 0.514 3
TPSA105*020T3000 A 1 20 85 13 125 0.5 4 3000 0.158 0.142 0.063 1
TPSA155*020T3000 A 1.5 20 85 13 125 0.5 6 3000 0.158 0.142 0.063 1
TPSA225*020T3000 A 2.2 20 85 13 125 0.5 6 3000 0.158 0.142 0.063 1
TPSB225*020T1700 B 2.2 20 85 13 125 0.5 6 1700 0.224 0.201 0.089 1
TPSA335*020T2500 A 3.3 20 85 13 125 0.7 6 2500 0.173 0.156 0.069 1
TPSB335*020T1300 B 3.3 20 85 13 125 0.7 6 1300 0.256 0.230 0.102 1
TPSA475*020T1800 A 4.7 20 85 13 125 0.9 6 1800 0.204 0.184 0.082 1
TPSB475*020T0750 B 4.7 20 85 13 125 0.9 6 750 0.337 0.303 0.135 1
TPSB475*020T1000 B 4.7 20 85 13 125 0.9 6 1000 0.292 0.262 0.117 1
TPSB685*020T0600 B 6.8 20 85 13 125 1.4 6 600 0.376 0.339 0.151 1
TPSB685*020T1000 B 6.8 20 85 13 125 1.4 6 1000 0.292 0.262 0.117 1
TPSC685*020T0700 C 6.8 20 85 13 125 1.4 6 700 0.396 0.357 0.159 1
TPSB106*020T0500 B 10 20 85 13 125 2 6 500 0.412 0.371 0.165 1
TPSB106*020T1000 B 10 20 85 13 125 2 6 1000 0.292 0.262 0.117 1
TPSC106*020T0500 C 10 20 85 13 125 2 6 500 0.469 0.422 0.188 1
TPSC106*020T0700 C 10 20 85 13 125 2 6 700 0.396 0.357 0.159 1
TPSB156*020T0500 B 15 20 85 13 125 3 6 500 0.412 0.371 0.165 1
TPSC156*020T0400 C 15 20 85 13 125 3 6 400 0.524 0.472 0.210 1
TPSC156*020T0450 C 15 20 85 13 125 3 6 450 0.494 0.445 0.198 1
TPSB226*020T0400 B 22 20 85 13 125 4.4 6 400 0.461 0.415 0.184 1
TPSB226*020T0600 B 22 20 85 13 125 4.4 6 600 0.376 0.339 0.151 1
TPSC226*020T0400 C 22 20 85 13 125 4.4 6 400 0.524 0.472 0.210 1
TPSD226*020T0200V D 22 20 85 13 125 4.4 6 200 0.866 0.779 0.346 3
TPSD226*020T0300V D 22 20 85 13 125 4.4 6 300 0.707 0.636 0.283 3
TPSC336*020T0300 C 33 20 85 13 125 6.6 6 300 0.606 0.545 0.242 1
TPSD336*020T0160V D 33 20 85 13 125 6.6 6 160 0.968 0.871 0.387 3
TPSD336*020T0200V D 33 20 85 13 125 6.6 6 200 0.866 0.779 0.346 3
TPSD476*020T0200V D 47 20 85 13 125 9.4 6 200 0.866 0.779 0.346 3
TPSD686*020T0150V D 68 20 85 13 125 13.6 6 150 1.000 0.900 0.400 3
TPSD686*020T0200V D 68 20 85 13 125 13.6 6 200 0.866 0.779 0.346 3
TPSD686*020T0300V D 68 20 85 13 125 13.6 6 300 0.707 0.636 0.283 3
TPSE686*020T0125V E 68 20 85 13 125 13.6 6 125 1.149 1.034 0.460 3
TPSE686*020T0150V E 68 20 85 13 125 13.6 6 150 1.049 0.944 0.420 3
TPSE686*020T0200V E 68 20 85 13 125 13.6 6 200 0.908 0.817 0.363 3
TPSE107*020T0100V E 100 20 85 13 125 20 6 100 1.285 1.156 0.514 3
TPSE107*020T0150V E 100 20 85 13 125 20 6 150 1.049 0.944 0.420 3
TPSE107*020T0200V E 100 20 85 13 125 20 6 200 0.908 0.817 0.363 3
TPSA474*025T7000 A 0.47 25 85 17 125 0.5 4 7000 0.104 0.093 0.041 1
TPSA684*025T6000 A 0.68 25 85 17 125 0.5 4 6000 0.112 0.101 0.045 1
TPSA105*025T4000 A 1.0 25 85 17 125 0.5 4 4000 0.137 0.123 0.055 1
TPSA155*025T3000 A 1.5 25 85 17 125 0.5 6 3000 0.158 0.142 0.063 1
TPSA225*025T2500 A 2.2 25 85 17 125 0.6 6 2500 0.173 0.156 0.069 1
TPSB225*025T0900 B 2.2 25 85 17 125 0.6 6 900 0.307 0.277 0.123 1
TPSB225*025T1200 B 2.2 25 85 17 125 0.6 6 1200 0.266 0.240 0.106 1
TPSB225*025T2500 B 2.2 25 85 17 125 0.6 6 2500 0.184 0.166 0.074 1
TPSB335*025T0750 B 3.3 25 85 17 125 0.8 6 750 0.337 0.303 0.135 1
TPSB335*025T1500 B 3.3 25 85 17 125 0.8 6 1500 0.238 0.214 0.095 1
TPSB335*025T2000 B 3.3 25 85 17 125 0.8 6 2000 0.206 0.186 0.082 1
TPSB475*025T0700 B 4.7 25 85 17 125 1.2 6 700 0.348 0.314 0.139 1
TPSB475*025T0900 B 4.7 25 85 17 125 1.2 6 900 0.307 0.277 0.123 1
TPSC475*025T0700 C 4.7 25 85 17 125 1.2 6 700 0.396 0.357 0.159 1
TPSB685*025T0700 B 6.8 25 85 17 125 1.7 6 700 0.348 0.314 0.139 1
TPSC685*025T0500 C 6.8 25 85 17 125 1.7 6 500 0.469 0.422 0.188 1
TPSC685*025T0600 C 6.8 25 85 17 125 1.7 6 600 0.428 0.385 0.171 1
TPSC685*025T0700 C 6.8 25 85 17 125 1.7 6 700 0.396 0.357 0.159 1
TPSB106*025T1800 B 10 25 85 17 125 2.5 6 1800 0.217 0.196 0.087 1
TPSC106*025T0300 C 10 25 85 17 125 2.5 6 300 0.606 0.545 0.242 1
TPSC106*025T0500 C 10 25 85 17 125 2.5 6 500 0.469 0.422 0.188 1
TPSD106*025T0500V D 10 25 85 17 125 2.5 6 500 0.548 0.493 0.219 3
TPSC156*025T0220 C 15 25 85 17 125 3.8 6 220 0.707 0.636 0.283 1
TPSC156*025T0300 C 15 25 85 17 125 3.8 6 300 0.606 0.545 0.242 1
TPSD156*025T0300V D 15 25 85 17 125 3.8 6 300 0.707 0.636 0.283 3
072821

Size (μF)
TPSC226*025T0275 C 22 25 85 17 125 5.5 6 275 0.632 0.569 0.253 1
TPSC226*025T0400 C 22 25 85 17 125 5.5 6 400 0.524 0.472 0.210 1
TPSD226*025T0200V D 22 25 85 17 125 5.5 6 200 0.866 0.779 0.346 3
TPSD226*025T0300V D 22 25 85 17 125 5.5 6 300 0.707 0.636 0.283 3
TPSD336*025T0200V D 33 25 85 17 125 8.3 6 200 0.866 0.779 0.346 3
TPSD336*025T0300V D 33 25 85 17 125 8.3 6 300 0.707 0.636 0.283 3
TPSD476*025T0125V D 47 25 85 17 125 11.8 6 125 1.095 0.986 0.438 3
TPSD476*025T0150V D 47 25 85 17 125 11.8 6 150 1.000 0.900 0.400 3
TPSD476*025T0250V D 47 25 85 17 125 11.8 6 250 0.775 0.697 0.310 3
TPSE476*025T0125V E 47 25 85 17 125 11.8 6 125 1.149 1.034 0.460 3
TPSE686*025T0200V E 68 25 85 17 125 17 6 200 0.908 0.817 0.363 3
TPSE107*025T0150V E 100 25 85 17 125 25 10 150 1.049 0.944 0.420 3
35 Volt @ 85°C
TPSA334*035T6000 A 0.33 35 85 23 125 0.5 4 6000 0.112 0.101 0.045 1
TPSA474*035T6000 A 0.47 35 85 23 125 0.5 4 6000 0.112 0.101 0.045 1
TPSA684*035T6000 A 0.68 35 85 23 125 0.5 4 6000 0.112 0.101 0.045 1
TPSA105*035T3000 A 1 35 85 23 125 0.5 4 3000 0.158 0.142 0.063 1
TPSB105*035T2000 B 1 35 85 23 125 0.5 4 2000 0.206 0.186 0.082 1
TPSA155*035T3000 A 1.5 35 85 23 125 0.5 6 3000 0.158 0.142 0.063 1
TPSB155*035T2500 B 1.5 35 85 23 125 0.5 6 2500 0.184 0.166 0.074 1
TPSB225*035T0750 B 2.2 35 85 23 125 0.8 6 750 0.337 0.303 0.135 1
TPSB225*035T1500 B 2.2 35 85 23 125 0.8 6 1500 0.238 0.214 0.095 1
TPSB225*035T2000 B 2.2 35 85 23 125 0.8 6 2000 0.206 0.186 0.082 1
TPSC225*035T1000 C 2.2 35 85 23 125 0.8 6 1000 0.332 0.298 0.133 1
TPSB335*035T1000 B 3.3 35 85 23 125 1.2 6 1000 0.292 0.262 0.117 1
TPSC335*035T0700 C 3.3 35 85 23 125 1.2 6 700 0.396 0.357 0.159 1
TPSB475*035T0700 B 4.7 35 85 23 125 1.6 6 700 0.348 0.314 0.139 1
TPSB475*035T1500 B 4.7 35 85 23 125 1.6 6 1500 0.238 0.214 0.095 1
TPSC475*035T0600 C 4.7 35 85 23 125 1.6 6 600 0.428 0.385 0.171 1
TPSD475*035T0700V D 4.7 35 85 23 125 1.6 6 700 0.463 0.417 0.185 3
TPSC685*035T0350 C 6.8 35 85 23 125 2.4 6 350 0.561 0.505 0.224 1
TPSD685*035T0400V D 6.8 35 85 23 125 2.4 6 400 0.612 0.551 0.245 3
TPSD685*035T0500V D 6.8 35 85 23 125 2.4 6 500 0.548 0.493 0.219 3
TPSC106*035T0600 C 10 35 85 23 125 3.5 6 600 0.428 0.385 0.171 1
TPSD106*035T0300V D 10 35 85 23 125 3.5 6 300 0.707 0.636 0.283 3
TPSD156*035T0300V D 15 35 85 23 125 5.3 6 300 0.707 0.636 0.283 3
TPSD226*035T0200V D 22 35 85 23 125 7.7 6 200 0.866 0.779 0.346 3
TPSD226*035T0300V D 22 35 85 23 125 7.7 6 300 0.707 0.636 0.283 3
TPSD226*035T0400V D 22 35 85 23 125 7.7 6 400 0.612 0.551 0.245 3
TPSE226*035T0200V E 22 35 85 23 125 7.7 6 200 0.908 0.817 0.363 3
TPSE226*035T0300V E 22 35 85 23 125 7.7 6 300 0.742 0.667 0.297 3
TPSD336*035T0200V D 33 35 85 23 125 11.6 6 200 0.866 0.779 0.346 3
TPSD336*035T0300V D 33 35 85 23 125 11.6 6 300 0.707 0.636 0.283 3
TPSE336*035T0250V E 33 35 85 23 125 11.6 6 250 0.812 0.731 0.325 3
TPSE336*035T0300V E 33 35 85 23 125 11.6 6 300 0.742 0.667 0.297 3
TPSE476*035T0200V E 47 35 85 23 125 16.5 6 200 0.908 0.817 0.363 3
TPSE476*035T0250V E 47 35 85 23 125 16.5 6 250 0.812 0.731 0.325 3
50 Volt @ 85°C
TPSA224*050T7000 A 0.22 50 85 33 125 0.5 4 7000 0.104 0.093 0.041 1
TPSA334*050T7000 A 0.33 50 85 33 125 0.5 4 7000 0.104 0.093 0.041 1
TPSA474*050T6500 A 0.47 50 85 33 125 0.5 4 6500 0.107 0.097 0.043 1
TPSB474*050T6000 B 0.47 50 85 33 125 0.5 4 6000 0.119 0.107 0.048 1
TPSB684*050T4000 B 0.68 50 85 33 125 0.5 4 4000 0.146 0.131 0.058 1
TPSB105*050T3000 B 1 50 85 33 125 0.5 6 3000 0.168 0.151 0.067 1
TPSC105*050T2500 C 1 50 85 33 125 0.5 4 2500 0.210 0.189 0.084 1
TPSC155*050T1500 C 1.5 50 85 33 125 0.8 6 1500 0.271 0.244 0.108 1
TPSC155*050T2000 C 1.5 50 85 33 125 0.8 6 2000 0.235 0.211 0.094 1
TPSC225*050T1500 C 2.2 50 85 33 125 1.1 8 1500 0.271 0.244 0.108 1
TPSD225*050T1200V D 2.2 50 85 33 125 1.1 6 1200 0.354 0.318 0.141 3
TPSC335*050T1000 C 3.3 50 85 33 125 1.6 6 1000 0.332 0.298 0.133 1
TPSD335*050T0800V D 3.3 50 85 33 125 1.7 6 800 0.433 0.390 0.173 3
TPSC475*050T0800 C 4.7 50 85 33 125 2.4 6 800 0.371 0.334 0.148 1
TPSD475*050T0250V D 4.7 50 85 33 125 2.4 6 250 0.775 0.697 0.310 1
TPSD475*050T0500V D 4.7 50 85 33 125 2.4 6 500 0.548 0.493 0.219 3
TPSD475*050T0700V D 4.7 50 85 33 125 2.4 6 700 0.463 0.417 0.185 3
TPSD685*050T0500V D 6.8 50 85 33 125 3.4 6 500 0.548 0.493 0.219 3
TPSD685*050T0600V D 6.8 50 85 33 125 3.4 6 600 0.500 0.450 0.200 3
TPSD106*050T0500V D 10 50 85 33 125 5 6 500 0.548 0.493 0.219 3
TPSE106*050T0250V E 10 50 85 33 125 5 6 250 0.812 0.731 0.325 3
TPSE106*050T0300V E 10 50 85 33 125 5 6 300 0.742 0.667 0.297 3
TPSE106*050T0400V E 10 50 85 33 125 5 6 400 0.642 0.578 0.257 3
TPSE106*050T0500V E 10 50 85 33 125 5 6 500 0.574 0.517 0.230 3
TPSE156*050T0250V E 15 50 85 33 125 7.5 6 250 0.812 0.731 0.325 3
072821

QUALIFICATION TABLE
TPS automotive series (Temperature range -55ºC to +125ºC)
TEST
voltage (Uc) at 125ºC for 2000 hours through a circuit
impedance of ≤0.1Ω/V. Stabilize at room temperature
for 1-2 hours before measuring. DF initial limit
Apply rated voltage (Ur) at 85ºC, 85% relative humidity DCL 2 x initial limit
Biased Humidity for 1000 hours. Stabilize at room temperature and ΔC/C within ±10% of initial value
humidity for 1-2 hours before measuring. DF 1.2 x initial limit
1 +20 15
2 -55 15
Stability 4 +85 15
5 +125 15
DCL initial limit
cycles of duration 6 min (30 sec charge, 5 min 30 sec
Surge Voltage ΔC/C within ±5% of initial value
discharge) through a charge / discharge resistance of
1000Ω DF initial limit
DCL initial limit
Mechanical
MIL-STD-202, Method 213, Condition F ΔC/C within ±5% of initial value
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
040120

High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

F91 Series
F91 Series
Low ESR, Resin-Molded Chip J-Lead
FEATURES
• SMD J-Lead
• Low ESR
APPLICATIONS
• General Medium Power DC/DC Convertors

EIA L ± 0.20 W ± 0.20 (0.008) H ± 0.20 (0.008) W1 ± 0.20 A ± 0.30 (0.012)
Code EIA Code
Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
S Min.
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
N 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
B, C, N CASE
476 = 47μF
Rated Voltage Code
Band
(Anode+)
xxxxx ID Code
4V G 16V C 35V V
6.3V J 20V D
10V A 25V E
HOW TO ORDER
F91 1A 107 M C ⃣
Type Rated Capacitance Code Tolerance Case Size Packaging

Voltage pF code: 1st two digits K = ±10% See table See Tape & Reel
represent significant M = ±20% above Packaging Section
figures, 3rd digit
represents multiplier
Leakage Current After 1 minute’s application of rated voltage, leakage current at 20°C
is not more than 0.01CV or 0.5μA, whichever is greater.
is not more than 0.1CV or 5μA, whichever is greater.
After 1 minute’s application of derated voltage, leakage current at
125°C is not more than 0.125CV or 6.3μA, whichever is greater.
+10% Max. at +85°C
-10% Max. at -55°C
090121

F91 Series
μF Code 4V (0G) 6.3V (0J) 10V (1A) 16V (1C) 20V (1D) 25V (1E) 35V (1V)
6.8 685 C
10 106 C N
15 156 C N
22 226 B N N
33 336 B/C N
47 476 B N N N
68 686 C
100 107 C C N
150 157 C C N
220 227 C C/N N
330 337 N N N
470 477 N N
680 687 N
Released ratings

Rated DF ESR 100kHz RMS Current (mA)
Part Number Voltage @ 120Hz @ 100kHz MSL
(V) (%) (mΩ)
4 Volt
F910G157#CC C 150 4 6.0 12 250 663 597 265 1
F910G227#CC C 220 4 8.8 12 250 663 597 265 1
F910G337#NC N 330 4 13.2 10 100 1225 1102 490 1
F910G477#NC N 470 4 18.8 16 100 1225 1102 490 1
F910G687#NC N 680 4 27.2 18 100 1225 1102 490 1
6.3 Volt
F910J107#CC C 100 6.3 6.3 8 250 663 597 265 1
F910J157#CC C 150 6.3 9.5 12 250 663 597 265 1
F910J227#CC C 220 6.3 13.9 14 250 663 597 265 1
F910J227#NC N 220 6.3 13.9 10 100 1225 1102 490 1
F910J337#NC N 330 6.3 20.8 14 100 1225 1102 490 1
F910J477#NC N 470 6.3 29.6 16 100 1225 1102 490 1
10 Volt
F911A476#BA B 47 10 4.7 8 500 412 371 165 1
F911A686#CC C 68 10 6.8 8 300 606 545 242 1
F911A107#CC C 100 10 10.0 10 250 663 597 265 1
F911A157#NC N 150 10 15.0 10 100 1225 1102 490 1
F911A227#NC N 220 10 22.0 12 100 1225 1102 490 3
F911A337#NC N 330 10 33.0 18 100 1225 1102 490 3
16 Volt
F911C226#BA B 22 16 3.5 8 950 299 269 120 1
F911C336#BA B 33 16 5.3 8 950 299 269 120 1
F911C336#CC C 33 16 5.3 6 400 524 472 210 1
F911C476#NC N 47 16 7.6 6 150 1000 900 400 1
F911C107#NC N 100 16 16 10 100 1225 1102 490 3
20 Volt
F911D156#CC C 15 20 3 6 450 494 445 198 1
F911D476#NC N 47 20 9.4 8 200 866 779 346 1
25 Volt
F911E106#CC C 10 25 2.5 6 450 494 445 198 1
F911E226#NC N 22 25 5.5 6 200 866 779 346 1
F911E336#NC N 33 25 8.3 8 200 866 779 346 1
F911E476#NC N 47 25 11.8 8 250 775 697 310 1
35 Volt
F911V685#CC C 6.8 35 2.4 6 600 428 385 171 1
F911V106#NC N 10 35 3.5 6 300 707 636 283 1
F911V156#NC N 15 35 5.3 6 300 707 636 283 1
F911V226#NC N 22 35 7.7 8 300 707 636 283 1
#: "M" for ±20% tolerance, "K" for ± 10% tolerance.

022421

F91 Series
QUALIFICATION TABLE

TEST
Condition
Damp Heat Capacitance Change ............ Within ±10% of the initial value
(Steady State) Dissipation Factor . ............... Initial specified value or less
Capacitance Change ............ Within ±5% of the initial value
Temperature Cycles
Dissipation Factor . ............... Initial specified value or less
Resistance to Capacitance Change ............ Within ±5% of the initial value
After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000
successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above.
Surge Capacitance Change ............ Within ±5% of the initial value
Dissipation Factor . ............... Initial specified value or less
Endurance Capacitance Change .............Within ±10% of the initial value
Dissipation Factor .................. Initial specified value or less
Leakage Current ..................... Initial specified value or less
After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor
Shear Test side body which has no electrode and has been soldered beforehand on a substrate, there shall
be found neither exfoliation nor its sign at the terminal electrode.
Terminal Strength
is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as
040120

F91 Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

F91-AJ6 Series – Automotive Product Range
F91-AJ6 Series
Low ESR, Resin-Molded Chip - Automotive Product Range
FEATURES
COMPONENT
APPLICATIONS
• Infotainment

EIA L ± 0.20 W ± 0.20 (0.008) H ± 0.20 (0.008) W1 ± 0.20 A ± 0.30 (0.012)
Code EIA Code
Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
S Min.
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
N 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
A, B, N CASE
476 = 47μF
Rated Voltage Code
Band
(Anode+)
xxxxx ID Code
4V G 16V C 35V V
6.3V J 20V D
10V A 25V E
HOW TO ORDER
F91 1C 226 M B  AJ6
Type Rated Capacitance Code Tolerance Case Packaging Tolerance

Voltage pF code: 1st two K = ±10% Size See Tape & Reel K = ±10%
digits represent M = ±20% See Packaging Section M = ±20%
zeros to follow)
Leakage Current
more than 0.1CV or 5μA, whichever is greater.
After 1 minute’s application of derated voltage, leakage current at 125°C is not
+15% Max. at +125°C
-10% Max. at -55°C
090121

F91-AJ6 Series
μF Code 6.3V (0J) 10V (1A) 16V (1C) *1: ΔC/C Marked “*”
10 106 A A Item All Case (%)
22 226 A A B Damp Heat ±10
33 336 B B Temperature cycles ±10
47 476 A,B B Resistance soldering heat ±10
100 107 B N Surge ±10
220 227 N Endurance ±10
Released ratings

Capacitance
Part Number Case Size Voltage DCL (μA) @ 120Hz @ 100kHz ΔC/C MSL
(μF) (V) (%) (mΩ) 25ºC 85ºC 125ºC (%)
6.3 Volt
F910J226#AAAJ6 A 22 6.3 1.4 8 1250 245 220 98 * 3
F910J476#AAAJ6 A 47 6.3 3.0 18 1250 245 220 98 * 3
F910J476#BAAJ6 B 47 6.3 3.0 6 500 412 371 165 * 3
F910J107#BAAJ6 B 100 6.3 6.3 14 450 435 391 174 * 3
10 Volt
F911A106#AAAJ6 A 10 10 1.0 6 1500 224 201 89 * 3
F911A226#AAAJ6 A 22 10 2.2 12 1250 245 220 98 * 3
F911A336#BAAJ6 B 33 10 3.3 8 700 348 314 139 * 3
F911A476#BAAJ6 B 47 10 4.7 8 500 412 371 165 * 3
F911A227#NCAJ6 N 220 10 22.0 12 100 1225 1102 490 * 3
16 Volt
F911C106#AAAJ6 A 10 16 1.6 6 1500 224 201 89 * 3
F911C226#BAAJ6 B 22 16 3.5 8 950 299 269 120 * 3
F911C336#BAAJ6 B 33 16 5.3 8 950 299 269 120 * 3
F911C107#NCAJ6 N 100 16 16.0 10 100 1225 1102 490 * 3
#: "M" for ±20% tolerance, "K" for ± 10% tolerance. Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
QUALIFICATION TABLE
F91-AJ6 series (Temperature range -55ºC to +125ºC)
TEST
Condition
Resistance to Soldering Heat Dissipation Factor . ...................... Initial specified value or less
After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles
at 85ºC, capacitors shall meet the characteristic requirements in the table above.
Surge Capacitance Change ....................Refer to the table above (*1)
Endurance Capacitance Change . ............... Refer to the table above (*1)
Dissipation Factor...................... Initial specified value or less
Leakage Current ........................ Initial specified value or less
After applying the pressure load of 17.7N for 60 seconds horizontally to the center of capacitor side body which
Terminal Strength jig at the center of the substrate so that substrate may bend by1mm as illustrated. Then, there shall be found no
Failure Rate
60% confidence level.
040120

F91-AJ6 Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

TPM Series – Multianode, Ultra Low ESR
TPM Multianode
Tantalum Ultra Low ESR Capacitor
FEATURES
• Multi-anode Construction
• Super Low ESR
• CV Range: 10-2200μF / 2.5-50V LEAD-FREE COMPATIBLE
COMPONENT
• “Mirror” Multi-anode Construction Used with SnPb termination option is not
D, Y Case Capacitors Reduces ESL to Half RoHS compliant.
APPLICATIONS
• High Power DC/DC General Applications
MULTIANODE MULTIANODE TPM D, Y LOW SELF

CONSTRUCTION INDUCTANCE CONSTRUCTION
“MIRROR” DESIGN
MARKING
D, E, U, V, Y CASE CASE DIMENSIONS: millimeters (inches)
AVX LOGO Capacitance Value in pF EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
227 = 220µF Code S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
Polarity
A = 10V D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
(Anode+)
XXXXX ID Code E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
U 2924 7361-43 7.30 (0.287) 6.10 (0.240) 4.10 (0.162) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
HOW TO ORDER
TPM E 108 M 004 R 0018
See table pF code: 1st two digits K = ±10% 002=2.5Vdc R = Pure Tin 7" Reel
above represent significant figures, M = ±20% 004=4Vdc S = Pure Tin 13" Reel
3rd digit represents multiplier 006=6.3Vdc H = Tin Lead 7" Reel
(number of zeros to follow) 010=10Vdc K = Tin Lead 13" Reel
016=16Vdc H, K = Non RoHS
020=20Vdc H, K = Please Contact
025=25Vdc Manufacturer
035=35Vdc
050=50Vdc
Capacitance Tolerance: ±10%, ±20%
020222

TPM Multianode
6.8 685
10 106 D(140)/E(120)
15 156 E(75,100)
D(70)
22 226 E(75,100)
E(60,100)
33 336 D(65) E(50,65)
47 476 D(100) D(45,55) D(55)/E(65) E(55,65)
68 686 D(40,50) E(45,55)

100 107 Y(45)(M) D(40,50) E(35,45) E(45,60)
150 157 Y(45)(M) E(30,40) E(35)
E(25,40)
220 227 Y(30) (M)
D(35)
U(30,40)
330 337 D(25,35) D(25,35) D(35)/E(23,35) E(50)
D(30) E(23,30)
470 477 D(25,35)
E(18,23,30) U(23,30)
E(18,23)
680 687 D(25)/E(18,23)
U(18,23)/V(23)
D(25,45)
1000 108 D(25) E(18,23) E(25)(M)/V(20)(M)
U(18,23)/V(18)
E(12,15,18)
1500 158 E(15,18)
U(18,23)
2200 228 E(18)(M)
Released ratings (M tolerance only), (ESR ratings in mOhms in parentheses)

040120

TPM Multianode
ESR 100kHz RMS Current (A)
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
2.5 Volt @ 85°C
TPMD108*002#0025 D 1000 2.5 85 1.7 125 25 8 25 3.194 2.874 1.277 3
TPME158*002#0012 E 1500 2.5 85 1.7 125 38 6 12 4.743 4.269 1.897 3
TPME158*002#0015 E 1500 2.5 85 1.7 125 38 6 15 4.243 3.818 1.697 3
TPME158*002#0018 E 1500 2.5 85 1.7 125 38 6 18 3.873 3.486 1.549 3
TPMU158*002R0018 U 1500 2.5 85 1.7 125 30 6 18 4.048 3.643 1.619 3
TPMU158*002R0023 U 1500 2.5 85 1.7 125 30 6 23 3.581 3.223 1.433 3
TPME228M002#0018 E 2200 2.5 85 1.7 125 44 10 18 3.873 3.486 1.549 3
4 Volt @ 85°C
TPMD337*004#0025 D 330 4 85 2.7 125 13.2 8 25 3.194 2.874 1.277 3
TPMD337*004#0035 D 330 4 85 2.7 125 13.2 8 35 2.699 2.429 1.080 3
TPMD477*004#0025 D 470 4 85 2.7 125 18.8 8 25 3.194 2.874 1.277 3
TPMD477*004#0035 D 470 4 85 2.7 125 18.8 8 35 2.699 2.429 1.080 3
TPMD687*004#0025 D 680 4 85 2.7 125 27.2 8 25 3.194 2.874 1.277 3
TPME687*004#0018 E 680 4 85 2.7 125 27 6 18 3.873 3.486 1.549 3
TPME687*004#0023 E 680 4 85 2.7 125 27 6 23 3.426 3.084 1.370 3
TPMD108*004#0025 D 1000 4 85 2.7 125 40 8 25 3.194 2.874 1.277 3
TPMD108*004#0045 D 1000 4 85 2.7 125 40 8 45 2.380 2.142 0.952 3
TPME108*004#0018 E 1000 4 85 2.7 125 40 6 18 3.873 3.486 1.549 3
TPME108*004#0023 E 1000 4 85 2.7 125 40 6 23 3.426 3.084 1.370 3
TPMU108*004R0018 U 1000 4 85 2.7 125 40 6 18 4.048 3.643 1.619 3
TPMU108*004R0023 U 1000 4 85 2.7 125 40 6 23 3.581 3.223 1.433 3
TPMV108*004#0018 V 1000 4 85 2.7 125 40 6 18 3.979 3.581 1.592 3
TPME158*004#0015 E 1500 4 85 2.7 125 60 6 15 4.243 3.818 1.697 3
TPME158*004#0018 E 1500 4 85 2.7 125 60 6 18 3.873 3.486 1.549 3
6.3 Volt @ 85°C
TPMY227M006#0030 Y 220 6.3 85 4 125 13.2 6 30 2.646 2.381 1.058 3
TPMD337*006#0025 D 330 6.3 85 4 125 19.8 8 25 3.194 2.874 1.277 3
TPMD337*006#0035 D 330 6.3 85 4 125 19.8 8 35 2.699 2.429 1.080 3
TPMD477*006#0030 D 470 6.3 85 4 125 28.2 8 30 2.915 2.624 1.166 3
TPME477*006#0018 E 470 6.3 85 4 125 28 6 18 3.873 3.486 1.549 3
TPME477*006#0023 E 470 6.3 85 4 125 28 6 23 3.426 3.084 1.370 3
TPME477*006#0030 E 470 6.3 85 4 125 28 6 30 3.000 2.700 1.200 3
TPME687*006#0018 E 680 6.3 85 4 125 41 6 18 3.873 3.486 1.549 3
TPME687*006#0023 E 680 6.3 85 4 125 41 6 23 3.426 3.084 1.370 3
TPMU687*006R0018 U 680 6.3 85 4 125 41 6 18 4.048 3.643 1.619 3
TPMU687*006R0023 U 680 6.3 85 4 125 41 6 23 3.581 3.223 1.433 3
TPMV687*006#0023 V 680 6.3 85 4 125 41 6 23 3.520 3.168 1.408 3
TPME108M006#0025 E 1000 6.3 85 4 125 63 8 25 3.286 2.958 1.315 3
TPMV108M006#0020 V 1000 6.3 85 4 125 63 8 20 3.775 3.397 1.510 3
10 Volt @ 85°C
TPMY107M010#0045 Y 100 10 85 7 125 10 8 45 2.160 1.944 0.864 3
TPMY157M010#0045 Y 150 10 85 7 125 15 8 45 2.160 1.944 0.864 3
TPMD227*010#0035 D 220 10 85 7 125 22 8 35 2.699 2.429 1.080 3
TPMD337*010#0035 D 330 10 85 7 125 33 8 35 2.699 2.429 1.080 3
TPME337*010#0023 E 330 10 85 7 125 33 6 23 3.426 3.084 1.370 3
TPME337*010#0035 E 330 10 85 7 125 33 6 35 2.777 2.500 1.111 3
TPME477*010#0023 E 470 10 85 7 125 47 6 23 3.426 3.084 1.370 3
TPME477*010#0030 E 470 10 85 7 125 47 6 30 3.000 2.700 1.200 3
TPMU477*010R0023 U 470 10 85 7 125 47 8 23 3.581 3.223 1.433 3
TPMU477*010R0030 U 470 10 85 7 125 47 8 30 3.136 2.822 1.254 3
16 Volt @ 85°C
TPMD476*016#0100 D 47 16 85 10 125 7.5 8 100 1.597 1.437 0.639 3
TPMD686*016#0040 D 68 16 85 10 125 10.9 8 40 2.525 2.272 1.010 3
TPMD686*016#0050 D 68 16 85 10 125 10.9 8 50 2.258 2.032 0.903 3
TPMD107*016#0040 D 100 16 85 10 125 16 8 40 2.525 2.272 1.010 3
TPMD107*016#0050 D 100 16 85 10 125 16 8 50 2.258 2.032 0.903 3
TPME157*016#0030 E 150 16 85 10 125 24 6 30 3.000 2.700 1.200 3
TPME157*016#0040 E 150 16 85 10 125 24 6 40 2.598 2.338 1.039 3
TPME227*016#0025 E 220 16 85 10 125 35 6 25 3.286 2.958 1.315 3
TPME227*016#0040 E 220 16 85 10 125 35 6 40 2.598 2.338 1.039 3
TPMU227*016R0030 U 220 16 85 10 125 35 8 30 3.136 2.822 1.254 3
TPMU227*016R0040 U 220 16 85 10 125 35 8 40 2.716 2.444 1.086 3
TPME337*016#0050 E 330 16 85 10 125 52.8 10 50 2.324 2.091 0.930 3
20 Volt @ 85°C
TPMD476*020#0045 D 47 20 85 13 125 9.4 8 45 2.380 2.142 0.952 3
TPMD476*020#0055 D 47 20 85 13 125 9.4 8 55 2.153 1.938 0.861 3
TPME107*020#0035 E 100 20 85 13 125 20 6 35 2.777 2.500 1.111 3
TPME107*020#0045 E 100 20 85 13 125 20 6 45 2.449 2.205 0.980 3
TPME157*020#0035 E 150 20 85 13 125 30 10 35 2.777 2.500 1.111 3
040120

TPM Multianode
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
25 Volt @ 85°C
TPMD336*025#0065 D 33 25 85 17 125 8.3 8 65 1.981 1.783 0.792 3
TPMD476*025#0055 D 47 25 85 17 125 11.8 8 55 2.153 1.938 0.861 3
TPME476*025#0065 E 47 25 85 17 125 11.8 6 65 2.038 1.834 0.815 3
TPME686*025#0045 E 68 25 85 17 125 17 6 45 2.449 2.205 0.980 3
TPME686*025#0055 E 68 25 85 17 125 17 6 55 2.216 1.994 0.886 3
TPME107*025#0045 E 100 25 85 17 125 25 14 45 2.449 2.205 0.980 3
TPME107*025#0060 E 100 25 85 17 125 25 14 60 2.121 1.909 0.849 3
35 Volt @ 85°C
TPMD226*035#0070 D 22 35 85 23 125 7.7 8 70 1.909 1.718 0.763 3
TPME226*035#0060 E 22 35 85 23 125 8 6 60 2.121 1.909 0.849 3
TPME226*035#0100 E 22 35 85 23 125 8 6 100 1.643 1.479 0.657 3
TPME336*035#0050 E 33 35 85 23 125 12 6 50 2.324 2.091 0.930 3
TPME336*035#0065 E 33 35 85 23 125 12 6 65 2.038 1.834 0.815 3
TPME476*035#0055 E 47 35 85 23 125 16 6 55 2.216 1.994 0.886 3
TPME476*035#0065 E 47 35 85 23 125 16 6 65 2.038 1.834 0.815 3
50 Volt @ 85°C
TPMD106*050#0140 D 10 50 85 33 125 5 8 140 1.350 1.215 0.540 3
TPME106*050#0120 E 10 50 85 33 125 5 6 120 1.500 1.350 0.600 3
TPME156*050#0075 E 15 50 85 33 125 7.5 6 75 1.897 1.708 0.759 3
TPME156*050#0100 E 15 50 85 33 125 7.5 6 100 1.643 1.479 0.657 3
TPME226*050#0075 E 22 50 85 33 125 11 8 75 1.897 1.708 0.759 3
TPME226*050#0100 E 22 50 85 33 125 11 8 100 1.643 1.479 0.657 3
The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.
QUALIFICATION TABLE
TPM series (Temperature range -55ºC to +125ºC)
TEST
Apply rated voltage (Ur) at 85ºC and / or category-voltage
DCL initial limit
(Uc) at 125ºC for 2000 hours through a circuit impedance
of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours
DF initial limit
before measuring.
1 +20 15
Stability 4 +85 15
5 +125 15
Apply 1.3x category voltage (Uc) at 125ºC for 1000 cycles DCL initial limit
Surge
of duration 6 min (30 sec charge, 5 min 30 sec discharge) ΔC/C within ±5% of initial value
Voltage
through a charge / discharge resistance of 1000Ω DF initial limit
DCL initial limit
Mechanical
Shock
DF initial limit
ESR initial limit
DCL initial limit
DF initial limit
ESR initial limit
*Initial Limit
081821

TPM Multianode
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

High Performance Resin Molded Solid Tantalum Chip
TRJ Series – Enhanced Reliability Professional &
TRJ Series Automotive Grade - J-Lead
Professional Tantalum Chip Capacitor
FEATURES
• Improved Reliability – 2x Standard
• DCL Reduced by 25% to 0.0075 CV
• Robust Against Higher Thermo-mechanical Stresses During
Assembly Process COMPONENT
• CV Range: 0.10-680μF / 4-50V
RoHS compliant.
• 131 Low ESR Parts Released
• Automotive, Industrial and Other Higher End Applications
APPLICATIONS
• Automotive ECU
• ABS
• Airbag Systems
• Avionics
• Industrial Control Units

EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
MARKING A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
A, B, C, D, E, U CASE C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
227 = 220µF D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
Polarity
A = 10V U 2924 7361-43 7.30 (0.287) 6.10 (0.240) 4.10 (0.162) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
(Anode+)
XXXXX ID Code
HOW TO ORDER
TRJ B 105 * 035 R RJ —
Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging Standard Additional
See table pF code: 1st two digits represent K = ±10% 004 = 4V R = Pure Tin 7" Reel Suffix characters may be
above significant figures, 3rd digit M = ±20% 006 = 6.3V added for special
S = Pure Tin 13" Reel OR
represents multiplier (number of 010 = 10V requirements
zeros to follow) A = Gold Plating 7" Reel
016 = 16V B = Gold Plating 13" Reel
0100 V = Dry pack Option
(selected codes only)
020 = 20V
H = Tin Lead 7" Reel
025 = 25V Low ESR
K = Tin Lead 13" Reel
035 = 35V in mΩ
050 = 50V H, K = Non RoHS
A, B, H, K = Please
Contact Manufacturer
Leakage Current DCL: 0.0075CV or 0.3μA whichever is the greater
Rated Voltage (VR) ≤ + 85°C: 4 6.3 10 16 20 25 35 50
Category Voltage (VC) ≤ + 125°C: 2.7 4 7 10 13 17 23 33
Surge Voltage (VS) ≤ + 85°C: 5.2 8 13 20 26 32 46 65
Surge Voltage (VS) ≤ + 125°C: 3.4 5 8 13 16 20 28 40
Reliability: 0.5% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level
Termination Plating: Sn Plating (standard), Gold and SnPb Plating upon request
020222

TRJ Series

μF Code 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
0.10 104 A
0.15 154 A, A(6000)
0.22 224 A, A(6000) A, A(7000)
0.33 334 A, A(6000) A
0.47 474 A, A(7000) A, A(4000) B
0.68 684 A, A(6000) A, A(6000) B, B(2000)
A, B C, B
1.0 105 A A, A(3000) A, A(3000)
A(3000), B(2000) B(2000)
A, B
1.5 155 A A, A(3000) A, B, A(3000) C, C(1500)
A(2000), B(2500)
A, B C, D
2.2 225 A A, A(3500) A, A(3000) B, B(2000)
A(1600), B(1200) C(1000), D(1200)
A, B A, B B, C, D C, D
3.3 335 B, B(2000)
A(3500) A(2500), B(1300) B(1000), C(800) C(1000), D(800)
A, B A, B, B, C, D
4.7 475 A, A(2000) B, B(1000) D, D(600)
A(2000), B(1500) A(1800), B(1000) B(1500), C(600)
A, B, C B, C B, C C, D
6.8 685 A, B, A(1800) D
A(1500), B(1200) B(1000) B(1000), C(600) C(600)
A, B A, B B, C B, C C, D C, D
10 106 E, E(300,400)
A(1500) A(1800), B(800) B(800) B(1000), C(500) C(600) C(600), D(250,400)
A, B A, B, C B, C, D C, D
15 156 B B, B(800) D, D(225) U
A(1500), B(700) A(1000), B(600) B(500), C(400) C(500), D(300)
A, B, C B, C, D C, D,
22 226 B, B(700) D, D(300) D, D(200.400) U
A(900), B(600) B(600), C(350) C(400), D(150,300)
B, C B, C, D C, D
33 336 C C, C(300) D, D(400) E, E(150,250)
B(600) B(650), C(300) C(300), D(250)
B, C C, D C, D D, E
47 476 D, D(200) U, U(200)
B(500), C(250) C(300) C(350), D(200) D(250), E(150)
C, D D, E
68 686 C, C(200) C, C(300) U
C(200), D(150) D(200), E(120,200)
C, D, E
D, E
100 107 C, C(300) C(200), D(100,150), E, E(150) U
D(150), E(150)
E(100)
C, D D, E
150 157 E, E(150) U, U(250)
C(300), D(150) D(150), E(150)
220 227 D, D(150) D, E, E(150) U, U(200)
330 337 D, E, E(150) E, E(100) U, U(200)
470 477 E, E(200) U, U(200)
680 687 U, U(250)
042722

TRJ Series

Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
4 Volt @ 85°C
TRJB156*004#RJ B 15 4 85 2.7 125 0.45 6 3000 168 151 67 1
TRJC336*004#RJ C 33 4 85 2.7 125 1 6 2000 235 211 94 1
6.3 Volt @ 85ºC
TRJA106*006#RJ A 10 6.3 85 4 125 0.45 6 2200 185 166 74 1
TRJA106*006#1500 A 10 6.3 85 4 125 0.45 6 1500 224 201 89 1
TRJB106*006#RJ B 10 6.3 85 4 125 0.45 6 3000 168 151 67 1
TRJA156*006#RJ A 15 6.3 85 4 125 0.68 6 2030 192 173 77 1
TRJA156*006#1500 A 15 6.3 85 4 125 0.68 6 1500 224 201 89 1
TRJB156*006#RJ B 15 6.3 85 4 125 0.68 6 2030 205 184 82 1
TRJB156*006#0700 B 15 6.3 85 4 125 0.68 6 700 348 314 139 1
TRJA226*006#RJ A 22 6.3 85 4 125 0.99 6 1700 210 189 84 1
TRJA226*006#0900 A 22 6.3 85 4 125 0.99 6 900 289 260 115 1
TRJB226*006#RJ B 22 6.3 85 4 125 0.99 6 1880 213 191 85 1
TRJB226*006#0600 B 22 6.3 85 4 125 0.99 6 600 376 339 151 1
TRJC226*006#RJ C 22 6.3 85 4 125 0.99 6 2000 235 211 94 1
TRJB336*006#RJ B 33 6.3 85 4 125 1.5 6 1740 221 199 88 1
TRJB336*006#0600 B 33 6.3 85 4 125 1.5 6 600 376 339 151 1
TRJC336*006#RJ C 33 6.3 85 4 125 1.5 6 1800 247 222 99 1
TRJB476*006#RJ B 47 6.3 85 4 125 2.1 6 1620 229 206 92 1
TRJB476*006#0500 B 47 6.3 85 4 125 2.1 6 500 412 371 165 1
TRJC476*006#RJ C 47 6.3 85 4 125 2.1 6 540 451 406 181 1
TRJC476*006#0250 C 47 6.3 85 4 125 2.1 6 250 663 597 265 1
TRJC686*006#RJ C 68 6.3 85 4 125 3.1 6 490 474 426 190 1
TRJC686*006#0200 C 68 6.3 85 4 125 3.1 6 200 742 667 297 1
TRJC107*006#RJ C 100 6.3 85 4 125 4.5 6 440 500 450 200 1
TRJC107*006#0300 C 100 6.3 85 4 125 4.5 6 300 606 545 242 1
TRJC157*006#RJ C 150 6.3 85 4 125 6.8 8 500 469 422 188 1
TRJC157*006#0300 C 150 6.3 85 4 125 6.8 8 300 606 545 242 1
TRJD157*006#RJ D 150 6.3 85 4 125 6.8 6 400 612 551 245 11)
TRJD157*006#0150 D 150 6.3 85 4 125 6.8 6 150 1000 900 400 11)
TRJD227*006#RJ D 220 6.3 85 4 125 9.9 8 360 645 581 258 11)
TRJD227*006#0150 D 220 6.3 85 4 125 9.9 8 150 1000 900 400 11)
TRJD337*006#RJ D 330 6.3 85 4 125 14 8 400 612 551 245 11)
TRJE337*006#RJ E 330 6.3 85 4 125 14 8 330 707 636 283 11)
TRJE337*006#0150 E 330 6.3 85 4 125 14 8 150 1049 944 420 11)
TRJE477*006#RJ E 470 6.3 85 4 125 21 8 250 812 731 325 11)
TRJE477*006#0200 E 470 6.3 85 4 125 21 8 200 908 817 363 11)
TRJU687*006RRJV U 680 6.3 85 4 125 30 30 500 574 517 230 3
TRJU687*006R0250V U 680 6.3 85 4 125 30 30 250 812 731 325 3
10 Volt @ 85°C
TRJA155*010#RJ A 1.5 10 85 7 125 0.3 6 7000 104 93 41 1
TRJA225*010#RJ A 2.2 10 85 7 125 0.3 6 7000 104 93 41 1
TRJA475*010#RJ A 4.7 10 85 7 125 0.35 6 2900 161 145 64 1
TRJA475*010#2000 A 4.7 10 85 7 125 0.35 6 2000 194 174 77 1
TRJA685*010#RJ A 6.8 10 85 7 125 0.51 6 2650 168 151 67 1
TRJA685*010#1800 A 6.8 10 85 7 125 0.51 6 1800 204 184 82 1
TRJB685*010#RJ B 6.8 10 85 7 125 0.51 6 3000 168 151 67 1
TRJA106*010#RJ A 10 10 85 7 125 0.75 6 2200 185 166 74 1
TRJA106*010#1800 A 10 10 85 7 125 0.75 6 1800 204 184 82 1
TRJB106*010#RJ B 10 10 85 7 125 0.75 6 2200 197 177 79 1
TRJB106*010#0800 B 10 10 85 7 125 0.75 6 800 326 293 130 1
TRJA156*010#RJ A 15 10 85 7 125 1.1 6 1800 204 184 82 1
TRJA156*010#1000 A 15 10 85 7 125 1.1 6 1000 274 246 110 1
TRJB156*010#RJ B 15 10 85 7 125 1.1 6 2030 205 184 82 1
TRJB156*010#0600 B 15 10 85 7 125 1.1 6 600 376 339 151 1
TRJC156*010#RJ C 15 10 85 7 125 1.1 6 2000 235 211 94 1
TRJB226*010#RJ B 22 10 85 7 125 1.7 6 1880 213 191 85 1
TRJB226*010#0700 B 22 10 85 7 125 1.7 6 700 348 314 139 1
TRJB336*010#RJ B 33 10 85 7 125 2.5 6 1000 292 262 117 1
TRJB336*010#0650 B 33 10 85 7 125 2.5 6 650 362 325 145 1
TRJC336*010#RJ C 33 10 85 7 125 2.5 6 590 432 389 173 1
TRJC336*010#0300 C 33 10 85 7 125 2.5 6 300 606 545 242 1
TRJD336*010#RJ D 33 10 85 7 125 2.5 6 1100 369 332 148 11)
TRJC476*010#RJ C 47 10 85 7 125 3.5 6 540 451 406 181 1
TRJC476*010#0300 C 47 10 85 7 125 3.5 6 300 606 545 242 1
TRJD476*010#RJ D 47 10 85 7 125 3.5 6 400 612 551 245 11)
TRJC686*010#RJ C 68 10 85 7 125 5.1 6 490 474 426 190 1
TRJC686*010#0300 C 68 10 85 7 125 5.1 6 300 606 545 242 1
TRJC107*010#RJ C 100 10 85 7 125 7.5 8 500 469 422 188 1
TRJC107*010#0200 C 100 10 85 7 125 7.5 8 200 742 667 297 1
040122

TRJ Series

Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TRJD107*010#RJ D 100 10 85 7 125 7.5 6 440 584 525 234 11)
TRJD107*010#0100 D 100 10 85 7 125 7.5 6 100 1225 1102 490 11)
TRJD107*010#0150 D 100 10 85 7 125 7.5 6 150 1000 900 400 11)
TRJE107*010#RJ E 100 10 85 7 125 7.5 6 440 612 551 245 11)
TRJE107*010#0100 E 100 10 85 7 125 7.5 6 100 1285 1156 514 11)
TRJD157*010#RJ D 150 10 85 7 125 11 8 400 612 551 245 11)
TRJD157*010#0150 D 150 10 85 7 125 11 8 150 1000 900 400 11)
TRJE157*010#RJ E 150 10 85 7 125 11 8 400 642 578 257 11)
TRJE157*010#0150 E 150 10 85 7 125 11 8 150 1049 944 420 11)
TRJD227*010#RJ D 220 10 85 7 125 17 8 500 548 493 219 11)
TRJE227*010#RJ E 220 10 85 7 125 17 8 360 677 609 271 11)
TRJE227*010#0150 E 220 10 85 7 125 17 8 150 1049 944 420 11)
TRJE337*010#RJ E 330 10 85 7 125 25 8 300 742 667 297 11)
TRJE337*010#0100 E 330 10 85 7 125 25 8 100 1285 1156 514 11)
TRJU477*010RRJV U 470 10 85 7 125 35 30 400 642 578 257 3
TRJU477*010R0200V U 470 10 85 7 125 35 30 200 908 817 363 3
@
16 Volt 85°C
TRJA105*016#RJ A 1.0 16 85 10 125 0.3 6 10000 87 78 35 1
TRJA225*016#RJ A 2.2 16 85 10 125 0.3 6 4550 128 116 51 1
TRJA225*016#3500 A 2.2 16 85 10 125 0.3 6 3500 146 132 59 1
TRJA335*016#RJ A 3.3 16 85 10 125 0.4 6 3740 142 127 57 1
TRJA335*016#3500 A 3.3 16 85 10 125 0.4 6 3500 146 132 59 1
TRJB335*016#RJ B 3.3 16 85 10 125 0.4 6 4500 137 124 55 1
TRJA475*016#RJ A 4.7 16 85 10 125 0.56 6 3160 154 139 62 1
TRJA475*016#2000 A 4.7 16 85 10 125 0.56 6 2000 194 174 77 1
TRJB475*016#RJ B 4.7 16 85 10 125 0.56 6 3160 164 148 66 1
TRJB475*016#1500 B 4.7 16 85 10 125 0.56 6 1500 238 214 95 1
TRJA685*016#RJ A 6.8 16 85 10 125 0.82 4 2000 194 174 77 1
TRJA685*016#1500 A 6.8 16 85 10 125 0.82 4 1500 224 201 89 1
TRJB685*016#RJ B 6.8 16 85 10 125 0.82 6 2650 179 161 72 1
TRJB685*016#1200 B 6.8 16 85 10 125 0.82 6 1200 266 240 106 1
TRJC685*016#RJ C 6.8 16 85 10 125 0.82 6 2500 210 189 84 1
TRJB106*016#RJ B 10 16 85 10 125 1.2 6 2200 197 177 79 1
TRJB106*016#0800 B 10 16 85 10 125 1.2 6 800 326 293 130 1
TRJC106*016#RJ C 10 16 85 10 125 1.2 6 2000 235 211 94 1
TRJB156*016#RJ B 15 16 85 10 125 1.8 6 2030 205 184 82 1
TRJB156*016#0800 B 15 16 85 10 125 1.8 6 800 326 293 130 1
TRJB226*016#RJ B 22 16 85 10 125 2.6 6 1100 278 250 111 1
TRJB226*016#0600 B 22 16 85 10 125 2.6 6 600 376 339 151 1
TRJC226*016#RJ C 22 16 85 10 125 2.6 6 700 396 357 159 1
TRJC226*016#0350 C 22 16 85 10 125 2.6 6 350 561 505 224 1
TRJD226*016#RJ D 22 16 85 10 125 2.6 6 1100 369 332 148 11)
TRJC336*016#RJ C 33 16 85 10 125 4 6 590 432 389 173 1
TRJC336*016#0300 C 33 16 85 10 125 4 6 300 606 545 242 1
TRJC476*016#RJ C 47 16 85 10 125 5.6 6 540 451 406 181 1
TRJC476*016#0350 C 47 16 85 10 125 5.6 6 350 561 505 224 1
TRJD476*016#RJ D 47 16 85 10 125 5.6 6 540 527 474 211 11)
TRJD476*016#0200 D 47 16 85 10 125 5.6 6 200 866 779 346 11)
TRJC686*016#RJ C 68 16 85 10 125 8.2 6 490 474 426 190 1
TRJC686*016#0200 C 68 16 85 10 125 8.2 6 200 742 667 297 1
TRJD686*016#RJ D 68 16 85 10 125 8.2 6 490 553 498 221 11)
TRJD686*016#0150 D 68 16 85 10 125 8.2 6 150 1000 900 400 11)
TRJD107*016#RJ D 100 16 85 10 125 12 6 440 584 525 234 11)
TRJD107*016#0150 D 100 16 85 10 125 12 6 150 1000 900 400 11)
TRJE107*016#RJ E 100 16 85 10 125 12 6 440 612 551 245 11)
TRJE107*016#0150 E 100 16 85 10 125 12 6 150 1049 944 420 11)
TRJE157*016#RJ E 150 16 85 10 125 16 6 300 742 667 297 11)
TRJE157*016#0150 E 150 16 85 10 125 16 6 150 1049 944 420 11)
TRJU227*016RRJV U 220 16 85 10 125 26.4 12 500 574 517 230 3
TRJU227*016R0200V U 220 16 85 10 125 26.4 12 200 908 817 363 3
TRJU337*016RRJV U 330 16 85 10 125 39 30 400 642 578 257 3
TRJU337*016R0200V U 330 16 85 10 125 39 30 200 908 817 363 3
20 Volt @ 85°C
TRJA105*020#RJ A 1 20 85 13 125 0.3 4 6630 106 96 43 1
TRJA105*020#3000 A 1 20 85 13 125 0.3 4 3000 158 142 63 1
TRJA155*020#RJ A 1.5 20 85 13 125 0.3 6 5460 117 105 47 1
TRJA155*020#3000 A 1.5 20 85 13 125 0.3 6 3000 158 142 63 1
TRJA225*020#RJ A 2.2 20 85 13 125 0.33 6 4550 128 116 51 1
TRJA225*020#3000 A 2.2 20 85 13 125 0.33 6 3000 158 142 63 1
TRJA335*020#RJ A 3.3 20 85 13 125 0.5 6 3740 142 127 57 1
TRJA335*020#2500 A 3.3 20 85 13 125 0.5 6 2500 173 156 69 1
040122

TRJ Series

Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TRJB335*020#RJ B 3.3 20 85 13 125 0.5 6 3740 151 136 60 1
TRJB335*020#1300 B 3.3 20 85 13 125 0.5 6 1300 256 230 102 1
TRJA475*020#RJ A 4.7 20 85 13 125 0.71 5 2500 184 166 74 1
TRJA475*020#1800 A 4.7 20 85 13 125 0.71 5 1800 217 196 87 1
TRJB475*020#RJ B 4.7 20 85 13 125 0.71 6 3160 164 148 66 1
TRJB475*020#1000 B 4.7 20 85 13 125 0.71 6 1000 292 262 117 1
TRJB685*020#RJ B 6.8 20 85 13 125 1 6 2650 179 161 72 1
TRJB685*020#1000 B 6.8 20 85 13 125 1 6 1000 292 262 117 1
TRJC685*020#RJ C 6.8 20 85 13 125 1 6 2000 235 211 94 1
TRJB106*020#RJ B 10 20 85 13 125 1.5 6 2200 197 177 79 1
TRJB106*020#1000 B 10 20 85 13 125 1.5 6 1000 292 262 117 1
TRJC106*020#RJ C 10 20 85 13 125 1.5 6 800 371 334 148 1
TRJC106*020#0500 C 10 20 85 13 125 1.5 6 500 469 422 188 1
TRJB156*020#RJ B 15 20 85 13 125 2.3 6 1400 280 252 112 1
TRJB156*020#0500 B 15 20 85 13 125 2.3 6 500 469 422 188 1
TRJC156*020#RJ C 15 20 85 13 125 2.3 6 720 391 352 156 1
TRJC156*020#0400 C 15 20 85 13 125 2.3 6 400 524 472 210 1
TRJD156*020#RJ D 15 20 85 13 125 2.3 6 1100 369 332 148 11)
TRJC226*020#RJ C 22 20 85 13 125 3.3 6 650 411 370 165 1
TRJC226*020#0400 C 22 20 85 13 125 3.3 6 400 524 472 210 1
TRJD226*020#RJ D 22 20 85 13 125 3.3 6 650 480 432 192 11)
TRJD226*020#0150 D 22 20 85 13 125 3.3 6 150 1000 900 400 11)
TRJD226*020#0300 D 22 20 85 13 125 3.3 6 300 707 636 283 11)
TRJC336*020#RJ C 33 20 85 13 125 5 6 590 432 389 173 1
TRJC336*020#0300 C 33 20 85 13 125 5 6 300 606 545 242 1
TRJD336*020#RJ D 33 20 85 13 125 5 6 590 504 454 202 11)
TRJD336*020#0250 D 33 20 85 13 125 5 6 250 775 697 310 11)
TRJD476*020#RJ D 47 20 85 13 125 7.1 6 540 527 474 211 11)
TRJD476*020#0200 D 47 20 85 13 125 7.1 6 200 866 779 346 11)
TRJD686*020#RJ D 68 20 85 13 125 10 6 490 553 498 221 11)
TRJD686*020#0200 D 68 20 85 13 125 10 6 200 866 779 346 11)
TRJE686*020#RJ E 68 20 85 13 125 10 6 490 580 522 232 11)
TRJE686*020#0120 E 68 20 85 13 125 10 6 120 1173 1055 469 11)
TRJE686*020#0200 E 68 20 85 13 125 10 6 200 908 817 363 11)
TRJE107*020#RJ E 100 20 85 13 125 15 6 300 742 667 297 11)
TRJE107*020#0150 E 100 20 85 13 125 15 6 150 1049 944 420 11)
TRJU157*020RRJV U 150 20 85 13 125 22 30 500 574 517 230 3
TRJU157*020R0250V U 150 20 85 13 125 22 30 250 812 731 325 3
@
25 Volt 85°C
TRJA474*025#RJ A 0.47 25 85 17 125 0.3 4 9530 89 80 35 1
TRJA474*025#7000 A 0.47 25 85 17 125 0.3 4 7000 104 93 41 1
TRJA684*025#RJ A 0.68 25 85 17 125 0.3 4 7980 97 87 39 1
TRJA684*025#6000 A 0.68 25 85 17 125 0.3 4 6000 112 101 45 1
TRJA105*025#RJ A 1 25 85 17 125 0.3 4 6630 106 96 43 1
TRJA105*025#3000 A 1 25 85 17 125 0.3 4 3000 158 142 63 1
TRJA155*025#RJ A 1.5 25 85 17 125 0.3 6 5460 117 105 47 1
TRJA155*025#3000 A 1.5 25 85 17 125 0.3 6 3000 158 142 63 1
TRJB155*025#RJ B 1.5 25 85 17 125 0.3 6 5000 130 117 52 1
TRJA225*025#RJ A 2.2 25 85 17 125 0.41 6 2900 161 145 64 1
TRJA225*025#1600 A 2.2 25 85 17 125 0.41 6 1600 217 195 87 1
TRJB225*025#RJ B 2.2 25 85 17 125 0.41 6 4550 137 123 55 1
TRJB225*025#1200 B 2.2 25 85 17 125 0.41 6 1200 266 240 106 1
TRJB335*025#RJ B 3.3 25 85 17 125 0.62 6 3740 151 136 60 1
TRJB335*025#2000 B 3.3 25 85 17 125 0.62 6 2000 206 186 82 1
TRJB475*025#RJ B 4.7 25 85 17 125 0.88 6 3160 164 148 66 1
TRJB475*025#1000 B 4.7 25 85 17 125 0.88 6 1000 292 262 117 1
TRJB685*025#RJ B 6.8 25 85 17 125 1.3 6 1500 238 214 95 1
TRJB685*025#1000 B 6.8 25 85 17 125 1.3 6 1000 292 262 117 1
TRJC685*025#RJ C 6.8 25 85 17 125 1.3 6 1070 321 289 128 1
TRJC685*025#0600 C 6.8 25 85 17 125 1.3 6 600 428 385 171 1
TRJC106*025#RJ C 10 25 85 17 125 1.9 6 800 371 334 148 1
TRJC106*025#0600 C 10 25 85 17 125 1.9 6 600 428 385 171 1
TRJD106*025#RJ D 10 25 85 17 125 1.9 6 1200 354 318 141 11)
TRJC156*025#RJ C 15 25 85 17 125 2.8 6 720 391 352 156 1
TRJC156*025#0500 C 15 25 85 17 125 2.8 6 500 469 422 188 1
TRJD156*025#RJ D 15 25 85 17 125 2.8 6 720 456 411 183 11)
TRJD156*025#0300 D 15 25 85 17 125 2.8 6 300 707 636 283 11)
TRJD226*025#RJ D 22 25 85 17 125 4.1 6 650 480 432 192 11)
TRJD226*025#0300 D 22 25 85 17 125 4.1 6 300 707 636 283 11)
TRJD336*025#RJ D 33 25 85 17 125 6.2 6 590 504 454 202 11)
TRJD336*025#0400 D 33 25 85 17 125 6.2 6 400 612 551 245 11)
040122

TRJ Series

Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TRJD476*025#RJ D 47 25 85 17 125 8.8 6 540 527 474 211 11)
TRJD476*025#0250 D 47 25 85 17 125 8.8 6 250 775 697 310 11)
TRJE476*025#RJ E 47 25 85 17 125 8.8 6 540 553 497 221 11)
TRJE476*025#0150 E 47 25 85 17 125 8.8 6 150 1049 944 420 11)
TRJU686*025RRJV U 68 25 85 17 125 12 30 500 574 517 230 3
TRJU107*025RRJV U 100 25 85 17 125 18 30 500 574 517 230 3
35 Volt @ 85°C
TRJA104*035#RJ A 0.1 35 85 23 125 0.3 4 20000 61 55 24 1
TRJA154*035#RJ A 0.15 35 85 23 125 0.3 4 16470 67 61 27 1
TRJA154*035#6000 A 0.15 35 85 23 125 0.3 4 6000 112 101 45 1
TRJA224*035#RJ A 0.22 35 85 23 125 0.3 4 13710 74 67 30 1
TRJA224*035#6000 A 0.22 35 85 23 125 0.3 4 6000 112 101 45 1
TRJA334*035#RJ A 0.33 35 85 23 125 0.3 4 11280 82 73 33 1
TRJA334*035#6000 A 0.33 35 85 23 125 0.3 4 6000 112 101 45 1
TRJA474*035#RJ A 0.47 35 85 23 125 0.3 4 9530 89 80 35 1
TRJA474*035#4000 A 0.47 35 85 23 125 0.3 4 4000 137 123 55 1
TRJA684*035#RJ A 0.68 35 85 23 125 0.3 4 7980 97 87 39 1
TRJA684*035#6000 A 0.68 35 85 23 125 0.3 4 6000 112 101 45 1
TRJA105*035#RJ A 1 35 85 23 125 0.3 4 6630 106 96 43 1
TRJA105*035#3000 A 1 35 85 23 125 0.3 4 3000 158 142 63 1
TRJB105*035#RJ B 1 35 85 23 125 0.3 4 3400 158 142 63 1
TRJB105*035#2000 B 1 35 85 23 125 0.3 4 2000 206 186 82 1
TRJA155*035#RJ A 1.5 35 85 23 125 0.39 6 3100 166 149 66 1
TRJA155*035#2000 A 1.5 35 85 23 125 0.39 6 2000 206 186 82 1
TRJB155*035#RJ B 1.5 35 85 23 125 0.39 6 5460 125 112 50 1
TRJB155*035#2500 B 1.5 35 85 23 125 0.39 6 2500 184 166 74 1
TRJB225*035#RJ B 2.2 35 85 23 125 0.58 6 4550 137 123 55 1
TRJB225*035#2000 B 2.2 35 85 23 125 0.58 6 2000 206 186 82 1
TRJB335*035#RJ B 3.3 35 85 23 125 0.87 6 3740 151 136 60 1
TRJB335*035#1000 B 3.3 35 85 23 125 0.87 6 1000 292 262 117 1
TRJC335*035#RJ C 3.3 35 85 23 125 0.87 6 1840 245 220 98 1
TRJC335*035#0800 C 3.3 35 85 23 125 0.87 6 800 371 334 148 1
TRJD335*035#RJ D 3.3 35 85 23 125 0.87 6 2000 274 246 110 11)
TRJB475*035#RJ B 4.7 35 85 23 125 1.2 6 2200 224 201 89 1
TRJB475*035#1500 B 4.7 35 85 23 125 1.2 6 1500 271 244 108 1
TRJC475*035#RJ C 4.7 35 85 23 125 1.2 6 1410 279 251 112 1
TRJC475*035#0600 C 4.7 35 85 23 125 1.2 6 600 428 385 171 1
TRJD475*035#RJ D 4.7 35 85 23 125 1.2 6 1500 316 285 126 11)
TRJC685*035#RJ C 6.8 35 85 23 125 1.8 6 1070 321 289 128 1
TRJC685*035#0600 C 6.8 35 85 23 125 1.8 6 600 428 385 171 1
TRJD685*035#RJ D 6.8 35 85 23 125 1.8 6 1300 340 306 136 11)
TRJC106*035#RJ C 10 35 85 23 125 2.6 6 800 371 334 148 1
TRJC106*035#0600 C 10 35 85 23 125 2.6 6 600 428 385 171 1
TRJD106*035#RJ D 10 35 85 23 125 2.6 6 800 433 390 173 11)
TRJD106*035#0250 D 10 35 85 23 125 2.6 6 250 775 697 310 11)
TRJD106*035#0400 D 10 35 85 23 125 2.6 6 400 612 551 245 11)
TRJD156*035#RJ D 15 35 85 23 125 3.9 6 720 456 411 183 11)
TRJD156*035#0225 D 15 35 85 23 125 3.9 6 225 816 735 327 11)
TRJD226*035#RJ D 22 35 85 23 125 5.8 6 650 480 432 192 11)
TRJD226*035#0200 D 22 35 85 23 125 5.8 6 200 866 779 346 11)
TRJD226*035#0400 D 22 35 85 23 125 5.8 6 400 612 551 245 11)
TRJE336*035#RJ E 33 35 85 23 125 8.7 6 590 529 476 212 11)
TRJE336*035#0150 E 33 35 85 23 125 8.7 6 150 1049 944 420 11)
TRJE336*035#0250 E 33 35 85 23 125 8.7 6 250 812 731 325 11)
TRJU476*035RRJV U 47 35 85 23 125 12.3 10 400 642 578 257 3
TRJU476*035R0200V U 47 35 85 23 125 12.3 10 200 908 8.17 363 3
50 Volt @ 85°C
TRJA224*050#RJ A 0.22 50 85 33 125 0.3 4 7500 100 90 40 1
TRJA224*050#7000 A 0.22 50 85 33 125 0.3 4 7000 104 93 41 1
TRJA334*050#RJ A 0.33 50 85 33 125 0.3 4 7000 104 93 41 1
TRJB474*050#RJ B 0.47 50 85 33 125 0.3 4 5000 130 117 52 1
TRJB684*050#RJ B 0.68 50 85 33 125 0.3 4 4000 146 131 58 1
TRJB684*050#2000 B 0.68 50 85 33 125 0.3 4 2000 206 186 82 1
TRJB105*050#RJ B 1 50 85 33 125 0.4 4 3400 158 142 63 1
TRJB105*050#2000 B 1 50 85 33 125 0.4 4 2000 206 186 82 1
TRJC105*050#RJ C 1 50 85 33 125 0.4 4 3000 191 172 77 1
TRJC155*050#RJ C 1.5 50 85 33 125 0.6 6 2500 210 189 84 1
TRJC155*050#1500 C 1.5 50 85 33 125 0.6 6 1500 271 244 108 1
TRJC225*050#RJ C 2.2 50 85 33 125 0.8 6 1700 254 229 102 1
TRJC225*050#1000 C 2.2 50 85 33 125 0.8 6 1000 332 298 133 1
TRJD225*050#RJ D 2.2 50 85 33 125 0.8 4.5 2000 274 246 110 11)
040122

TRJ Series

Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TRJD225*050#1200 D 2.2 50 85 33 125 0.8 4.5 1200 354 318 141 11)
TRJC335*050#RJ C 3.3 50 85 33 125 1.2 6 1400 280 252 112 1
TRJC335*050#1000 C 3.3 50 85 33 125 1.2 6 1000 332 298 133 1
TRJD335*050#RJ D 3.3 50 85 33 125 1.2 4.5 1100 369 332 148 11)
TRJD335*050#0800 D 3.3 50 85 33 125 1.2 4.5 800 433 390 173 11)
TRJD475*050#RJ D 4.7 50 85 33 125 1.8 4.5 900 408 367 163 11)
TRJD475*050#0600 D 4.7 50 85 33 125 1.8 4.5 600 500 450 200 11)
TRJD685*050#RJ D 6.8 50 85 33 125 2.6 4.5 700 463 417 185 11)
TRJE106*050#RJ E 10 50 85 33 125 3.8 4.5 700 486 437 194 11)
TRJE106*050#0300 E 10 50 85 33 125 3.8 4.5 300 742 667 297 11)
TRJE106*050#0400 E 10 50 85 33 125 3.8 4.5 400 642 578 257 11)
TRJU156*050RRJV U 15 50 85 33 125 5.6 30 500 574 517 230 3
TRJU226*050RRJV U 22 50 85 33 125 8.2 30 500 574 517 230 3
11) Dry pack option (see How to order) is recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.
040122

TRJ Series
QUALIFICATION TABLE
TRJ professional series (Temperature range -55ºC to +125ºC)
TEST
Endurance voltage (Uc) at 125ºC for 2000 hours through a circuit ΔC/C within ±10% of initial value
impedance of ≤0.1Ω/V. Stabilize at room temperature for
DF initial limit
1-2 hours before measuring.
1 +20 15
2 -55 15
Stability 4 +85 15
5 +125 15
Apply 1.3x category voltage (Uc) at 125ºC for 1000 DCL initial limit
Surge Voltage discharge) through a charge / discharge resistance of
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
040120

TRJ Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

F97 Series – Enhanced Reliability Professional &
Automotive Grafe - J-Lead
F97 Series
Resin-Molded Chip, Improved Reliability J-Lead
FEATURES
• Improved Reliability - FR=0.5%/1000hrs
• SMD J-lead
APPLICATIONS
• Automotive Electronics(Engine ECU)
• Industrial Equipment

EIA L ± 0.20 W ± 0.20 (0.008) H ± 0.20 (0.008) W1 ± 0.20 A ± 0.30 (0.012)
Code EIA Code
Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
S Min.
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
N 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
A, B, C, N CASE
476 = 47μF
Rated Voltage Code
Band
(Anode+)
xxxxx ID Code
4V G 16V C 35V V
6.3V J 20V D
10V A 25V E
HOW TO ORDER
F97 1C 335 M A 
Type Rated Capacitance Tolerance Case Packaging

Voltage Code K = ±10% Size See Tape & Reel
pF code: 1st two digits M = ±20% See Packaging Section
represent significant figures, table
3rd digit represents multiplier above
Capacitance Tolerance: ±20%, ±10% at 120Hz
Leakage Current: After 1 minute’s application of rated voltage, leakage current at 20°C is not more than
0.01CV or 0.5μA, whichever is greater.
After 1 minute’s application of rated voltage, leakage current at 85°C is not more than
0.1CV or 5μA, whichever is greater.
After 1 minute’s application of derated voltage, leakage current at 125°C is not more than
0.125CV or 6.3μA, whichever is greater.
Capacitance Change By +15% Max. at +125°C
Temperature +10% Max. at +85°C
-10% Max. at -55°C
090121

F97 Series
μF Code 6.3V (0J) 10V (1A) 16V (1C) 20V (1D) 25V (1E) 35V (1V)
0.33 334 A
0.47 474 A
0.68 684 A A
1.0 105 A A A B(M)
1.5 155 A B
2.2 225 A A A B B
3.3 335 A A A B B C
4.7 475 A/B A/B A/B C
6.8 685 B B C C N
10 106 A/B A/B/C C C/N N
15 156 B B N N
22 226 A/B A/B B/C/N C/N N
33 336 A/C B/C/N B/C/N
47 476 B/C B/C/N C/N
68 686 N
100 107 C
150 157 C


100% 100% 100%
90%
80%
70%
67% 67% 63%
60%
50%
50% 50%
40% 42%
30%
32%
20%
10%
0%
-55ºC 85ºC 125ºC
Rated Voltage
Recommended Applications Voltage in General Circuit
Recommended Applications Voltage in Low Impedance Circuit
022422

F97 Series
Capacitance Rated DCL DF @ ESR @ 100kHz RMS Current (mA) *1 ΔC/C
(μF) Voltage (V) (μA) 120Hz (%) 100kHz (Ω) 25ºC 85ºC 125ºC (%)
6.3 Volt
F970J335#AA A 3.3 6.3 0.5 4 4.5 129 116 52 * 3
F970J156#BA B 15 6.3 0.9 6 2.0 206 186 82 * 3
F970J226#AA A 22 6.3 1.4 12 2.5 173 156 69 * 3
F970J226#BA B 22 6.3 1.4 8 1.9 212 190 85 * 3
F970J336#AA A 33 6.3 2.1 12 2.5 173 156 69 * 3
F970J336#CC C 33 6.3 2.1 6 1.1 316 285 126 * 3
F970J476#BA B 47 6.3 3.0 8 1.0 292 262 117 * 3
F970J476#CC C 47 6.3 3.0 6 0.9 350 315 140 * 3
F970J157#CC C 150 6.3 9.5 12 0.7 396 357 159 * 3
10 Volt
F971A225#AA A 2.2 10 0.5 4 5.0 122 110 49 * 3
F971A335#AA A 3.3 10 0.5 4 4.5 129 116 52 * 3
F971A475#AA A 4.7 10 0.5 6 4.0 137 123 55 * 3
F971A475#BA B 4.7 10 0.5 6 2.8 174 157 70 * 3
F971A685#BA B 6.8 10 0.7 6 2.5 184 166 74 * 3
F971A106#AA A 10 10 1.0 6 3.0 158 142 63 * 3
F971A106#BA B 10 10 1.0 6 2.0 206 186 82 * 3
F971A156#BA B 15 10 1.5 6 2.0 206 186 82 * 3
F971A226#AA A 22 10 2.2 15 3.0 158 142 63 * 3
F971A226#BA B 22 10 2.2 8 1.9 212 190 85 * 3
F971A336#BA B 33 10 3.3 8 1.9 212 190 85 * 3
F971A336#CC C 33 10 3.3 6 1.1 316 285 126 * 3
F971A336#NC N 33 10 3.3 6 0.7 463 417 185 * 3
F971A476#BA B 47 10 4.7 10 1.0 292 262 117 * 3
F971A476#CC C 47 10 4.7 8 0.9 350 315 140 * 3
F971A476#NC N 47 10 4.7 6 0.7 463 417 185 * 3
F971A686#NC N 68 10 6.8 6 0.6 500 450 200 * 3
F971A107#CC C 100 10 10.0 10 0.7 396 357 159 * 3
16 Volt
F971C105#AA A 1 16 0.5 4 7.5 100 90 40 * 3
F971C225#AA A 2.2 16 0.5 4 5.0 122 110 49 * 3
F971C335#AA A 3.3 16 0.5 4 4.5 129 116 52 * 3
F971C475#AA A 4.7 16 0.8 8 4.0 137 123 55 * 3
F971C475#BA B 4.7 16 0.8 6 2.8 174 157 70 * 3
F971C685#BA B 6.8 16 1.1 6 2.5 184 166 74 * 3
F971C106#AA A 10 16 1.6 8 3.5 146 132 59 * 3
F971C106#BA B 10 16 1.6 6 2.1 201 181 80 * 3
F971C106#CC C 10 16 1.6 6 1.5 271 244 108 * 3
F971C226#BA B 22 16 3.5 8 1.9 212 190 85 * 3
F971C226#CC C 22 16 3.5 8 1.1 316 285 126 * 3
F971C226#NC N 22 16 3.5 6 0.7 463 417 185 * 3
F971C336#BA B 33 16 5.3 10 2.1 201 181 80 * 3
F971C336#CC C 33 16 5.3 8 1.1 316 285 126 * 3
F971C336#NC N 33 16 5.3 6 0.7 463 417 185 * 3
F971C476#CC C 47 16 7.5 10 1.1 316 285 126 * 3
F971C476#NC N 47 16 7.5 8 0.7 463 417 185 * 3
20 Volt
F971D105#AA A 1 20 0.5 4 7.5 100 90 40 * 3
F971D155#AA A 1.5 20 0.5 4 6.7 106 95 42 * 3
F971D225#AA A 2.2 20 0.5 6 6.3 109 98 44 * 3
F971D335#BA B 3.3 20 0.7 4 3.1 166 146 66 * 3
F971D475#AA A 4.7 20 0.9 8 4.0 137 123 55 * 3
F971D475#BA B 4.7 20 0.9 6 2.8 174 157 70 * 3
F971D685#CC C 6.8 20 1.4 6 1.8 247 222 99 * 3
F971D106#CC C 10 20 2.0 6 1.5 271 244 108 * 3
F971D156#NC N 15 20 3.0 6 0.7 463 417 185 * 3
F971D226#CC C 22 20 4.4 8 1.1 316 285 126 * 3
F971D226#NC N 22 20 4.4 6 0.7 463 417 185 * 3
25 Volt
F971E684#AA A 0.68 25 0.5 4 7.6 99 89 40 * 3
F971E105#AA A 1 25 0.5 4 7.5 100 90 40 * 3
F971E225#BA B 2.2 25 0.6 4 3.8 150 135 60 * 3
F971E335#BA B 3.3 25 0.8 4 3.5 156 140 62 * 3
F971E685#CC C 6.8 25 1.7 6 1.8 247 222 99 * 3
F971E106#NC N 10 25 2.5 6 1.0 387 349 155 * 3
F971E156#NC N 15 25 3.8 6 0.7 463 417 185 * 3
F971E226#NC N 22 25 5.5 6 0.7 463 417 185 * 3
030321

F97 Series
Capacitance Rated DCL DF @ ESR @ 100kHz RMS Current (mA) *1 ΔC/C
(μF) Voltage (V) (μA) 120Hz (%) 100kHz (Ω) 25ºC 85ºC 125ºC (%)
35 Volt
F971V334#AA A 0.33 35 0.5 4 12.0 79 71 32 * 3
F971V474#AA A 0.47 35 0.5 4 10.0 87 78 35 * 3
F971V684#AA A 0.68 35 0.5 4 7.6 99 89 40 * 3
F971V105MBA B 1 35 0.5 4 4.0 146 131 58 * 3
F971V155#BA B 1.5 35 0.5 4 4.0 146 131 58 * 3
F971V225#BA B 2.2 35 0.8 4 3.8 150 135 60 * 3
F971V335#CC C 3.3 35 1.2 4 2.0 235 211 94 * 3
F971V475#CC C 4.7 35 1.6 6 1.8 247 222 99 * 3
F971V685#NC N 6.8 35 2.4 6 1.0 387 349 155 * 3
F971V106#NC N 10 35 3.5 6 1.0 387 349 155 * 3
#: "M" for ±20% tolerance, "K" for ± 10% tolerance.
Item All Case (%)

Damp Heat ±10
Surge ±5
Endurance ±10
Load Humidity ±10
QUALIFICATION TABLE
TEST
Condition
At 85°C, 85% R.H., 1000 hours (No voltage applied)
Dissipation Factor . ...................... 120% or less than the initial specified value
Leakage Current . ......................... 200% of less than the initial specified value
Temperature Cycles
After immersing capacitors completely into a solder pot at 245ºC for 2 to 3 seconds,
Solderability
more than 3/4 of their electrode area shall remain covered with new solder.
After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000
successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above.
Surge Capacitance Change . ................Refer to the table above (*1)
Dissipation Factor ......................Initial specified value or less
Leakage Current .........................Initial specified value or less
Endurance Capacitance Change . ................. Refer to the table above (*1)
Dissipation Factor ....................... Initial specified value or less
Leakage Current .......................... Initial specified value or less
After applying the pressure load of 17.7N for 60 seconds horizontally to the center of capacitor side body
exfoliation nor its sign at the terminal electrode
Terminal Strength
jig at the center of the substrate so that substrate may bend by1mm as illustrated. Then, there shall be found no
Failure Rate 0.5% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level.
022422

F97 Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

F97-HT3 Series – High Temperature (135°C max) - J-Lead
F97-HT3 Series
High Temperature 135°C, Resin-molded Chip, High Reliability
FEATURES
• High Temperature 135˚C
• AEC-Q200 Qualified
• Failure Rate Level 0.5%/ 1000 hrs COMPONENT
APPLICATIONS
• Automotive Electronics (Engine ECU, Transmission, Oil Pump)
• Industrial Equipment

EIA L ± 0.20 W ± 0.20 (0.008) H ± 0.20 (0.008) W1 ± 0.20 A ± 0.30 (0.012)
Code EIA Code
Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
S Min.
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
N 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
A, B, C, N CASE
476 = 47μF
Rated Voltage Code
Band
(Anode+)
xxxxx ID Code
4V G 16V C 35V V
6.3V J 20V D
10V A 25V E
HOW TO ORDER
F97 1C 335 M A  HT3
Type Rated Capacitance Tolerance Case Packaging Temperature

Voltage Code K = ±10% Size See Tape & Reel Range
pF code: 1st two digits M = ±20% See Packaging Section 135ºC MAX
represent significant figures, table
3rd digit represents multiplier above
Leakage Current* After 1 minute’s application of rated voltage, leakage current at 20°C is not more
After 1 minute’s application of rated voltage, leakage current at 95°C is not more
than 0.1CV or 5μA, whichever is greater.
After 1 minute’s application of derated voltage, leakage current at 135°C is not more
+10% Max. at +85°C
-10% Max. at -55°C
*As for the surge voltage and derated voltage at 135°C, refer to page precautions for details.
090121

F97-HT3 Series

μF Code 6.3V (0J) 10V (1A) 16V (1C) 20V (1D) 25V (1E) 35V (1V)
0.33 334 A
0.47 474 A
0.68 684 A A
1 105 A A A B
1.5 155 A B
2.2 225 A B B
3.3 335 A A A B B C
4.7 475 A/B A/B A C
6.8 685 C N
10 106 A/B A/B/C C/N N
15 156 B B N
22 226 A/B B/C C/N
33 336 A/C B/C B/C/N
47 476 B B/C/N C/N
68 686 N
100 107 C
Released ratings

100% 100% 100%
90%
80%
70%
67% 67% 63%
60%
50%
50% 50%
40% 42%
30%
32%
20%
10%
0%
-55ºC 95ºC 135ºC
Rated Voltage
Recommended Applications Voltage in General Circuit
Recommended Applications Voltage in Low Impedance Circuit
022421

F97-HT3 Series
Capacitance Rated Leakage DF @ ESR @ 100kHz RMS Current (mA) *1 ΔC/C

(μF) Voltage (V) Current (μA) 120Hz (%) 100kHz (Ω) 25ºC 95ºC 135ºC (%)
6.3 Volt
F970J335#AAHT3 A 3.3 6.3 0.5 4 4.5 129 116 52 * 3
F970J156#BAHT3 B 15 6.3 0.9 6 2.0 206 186 82 * 3
F970J336#AAHT3 A 33 6.3 2.1 12 2.5 173 156 69 * 3
F970J336#CCHT3 C 33 6.3 2.1 6 1.1 316 285 126 * 3
F970J476#BAHT3 B 47 6.3 3.0 8 1.0 292 262 117 * 3
10 Volt
F971A335#AAHT3 A 3.3 10 0.5 4 4.5 129 116 52 * 3
F971A475#AAHT3 A 4.7 10 0.5 6 4.0 137 123 55 * 3
F971A475#BAHT3 B 4.7 10 0.5 6 2.8 174 157 70 * 3
F971A106#AAHT3 A 10 10 1.0 6 3.0 158 142 63 * 3
F971A106#BAHT3 B 10 10 1.0 6 2.0 206 186 82 * 3
F971A156#BAHT3 B 15 10 1.5 6 2.0 206 186 82 * 3
F971A226#AAHT3 A 22 10 2.2 15 3.0 158 142 63 * 3
F971A226#BAHT3 B 22 10 2.2 8 1.9 212 190 85 * 3
F971A336#BAHT3 B 33 10 3.3 8 1.9 212 190 85 * 3
F971A336#CCHT3 C 33 10 3.3 6 1.1 316 285 126 * 3
F971A476#BAHT3 B 47 10 4.7 10 1.0 292 262 117 * 3
F971A476#CCHT3 C 47 10 4.7 8 0.9 350 315 140 * 3
F971A476#NCHT3 N 47 10 4.7 6 0.7 463 417 185 * 3
F971A686#NCHT3 N 68 10 6.8 6 0.6 500 450 200 * 3
F971A107#CCHT3 C 100 10 10.0 10 0.7 396 357 159 * 3
16 Volt
F971C105#AAHT3 A 1 16 0.5 4 7.5 100 90 40 * 3
F971C225#AAHT3 A 2.2 16 0.5 4 5.0 122 110 49 * 3
F971C335#AAHT3 A 3.3 16 0.5 4 4.5 129 116 52 * 3
F971C475#AAHT3 A 4.7 16 0.8 8 4.0 137 123 55 * 3
F971C475#BAHT3 B 4.7 16 0.8 6 2.8 174 157 70 * 3
F971C106#AAHT3 A 10 16 1.6 8 3.5 146 132 59 * 3
F971C106#BAHT3 B 10 16 1.6 6 2.1 201 181 80 * 3
F971C106#CCHT3 C 10 16 1.6 6 1.5 271 244 108 * 3
F971C226#BAHT3 B 22 16 3.5 8 1.9 212 190 85 * 3
F971C226#CCHT3 C 22 16 3.5 8 1.1 316 285 126 * 3
F971C336#BAHT3 B 33 16 5.3 10 2.1 201 181 80 * 3
F971C336#CCHT3 C 33 16 5.3 8 1.1 316 285 126 * 3
F971C336#NCHT3 N 33 16 5.3 6 0.7 463 417 185 * 3
F971C476#CCHT3 C 47 16 7.5 10 1.1 316 285 126 * 3
F971C476#NCHT3 N 47 16 7.5 8 0.7 463 417 185 * 3
20 Volt
F971D105#AAHT3 A 1 20 0.5 4 7.5 100 90 40 * 3
F971D155#AAHT3 A 1.5 20 0.5 4 6.7 106 95 42 * 3
F971D335#BAHT3 B 3.3 20 0.7 4 3.1 166 149 66 * 3
F971D475#AAHT3 A 4.7 20 0.9 8 4.0 137 123 55 * 3
F971D226#CCHT3 C 22 20 4.4 8 1.1 316 285 126 * 3
F971D226#NCHT3 N 22 20 4.4 6 0.7 463 417 185 * 3
25 Volt
F971E684#AAHT3 A 0.68 25 0.5 4 7.6 99 89 40 * 3
F971E105#AAHT3 A 1 25 0.5 4 7.5 100 90 40 * 3
F971E225#BAHT3 B 2.2 25 0.6 4 3.8 150 135 60 * 3
F971E335#BAHT3 B 3.3 25 0.8 4 3.5 156 140 62 * 3
F971E685#CCHT3 C 6.8 25 1.7 6 1.8 247 222 99 * 3
F971E106#CCHT3 C 10 25 2.5 6 1.6 262 236 105 * 3
F971E106#NCHT3 N 10 25 2.5 6 1.0 387 349 155 * 3
F971E156#NCHT3 N 15 25 3.8 6 0.7 463 417 185 * 3
35 Volt
F971V334#AAHT3 A 0.33 35 0.5 4 12.0 79 71 32 * 3
F971V474#AAHT3 A 0.47 35 0.5 4 10.0 87 78 35 * 3
F971V684#AAHT3 A 0.68 35 0.5 4 7.6 99 89 40 * 3
F971V105#BAHT3 B 1 35 0.5 4 4.0 146 131 58 * 3
F971V155#BAHT3 B 1.5 35 0.5 4 4.0 146 131 58 * 3
F971V225#BAHT3 B 2.2 35 0.8 4 3.8 150 135 60 * 3
F971V335#CCHT3 C 3.3 35 1.2 4 2.0 235 211 94 * 3
F971V475#CCHT3 C 4.7 35 1.6 6 1.8 247 222 99 * 3
F971V685#NCHT3 N 6.8 35 2.4 6 1.0 387 349 155 * 3
F971V106#NCHT3 N 10 35 3.5 6 1.0 387 349 155 * 3
Item All Case (%) *1: ΔC/C Marked “*”

Damp Heat ±10 #: "M" for ±20% tolerance, "K" for ± 10% tolerance.
Temperature cycles ±5 Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
Surge ±5
Endurance ±10
Load Humidity ±10
030121

F97-HT3 Series
QUALIFICATION TABLE
F97-HT3 series (Temperature range -55°C to +135°C)
TEST
Condition
At 85°C, 85% RH For 1000 hours (No voltage applied)
Damp Heat Capacitance Change.............. Refer to the table above (*1)
(Steady State) Dissipation Factor .................. Initial specied value or less
Leakage Current . ................... 125% or less than the initial specified value
After 1000 hours application of rated voltage in series with a 33Ω resistor at 85°C, 85% RH capacitors
meet the characteristics requirements table below.
Load Humidity Capacitance Change ............. Refer to the table above (*1)
Dissipation Factor .................. 120% or less than the Initial specified value
Leakage Current...................... 200% or less than the initial specified value
At -55°C / +135°C,For 30 minutes each,1000 cycles
Capacitance Change ............. Refer to the table above (*1)
Temperature Cycles Dissipation Factor .................. Initial specified value or less
Leakage Current...................... Initial specified value or less
10 seconds reow at 260°C, 5 seconds immersion at 260°C.
Resistance to Capacitance Change ............. Refer to the table above (*1)
Soldering Heat Dissipation Factor .................. Initial specified value or less
Leakage Current...................... Initial specified value or less
After immersing capacitors completely into a solder pot at 245°C for 2 to 3 seconds, more than 3/4 of their electrode area shall remain
Solderability covered with new solder.
After application of surge in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF,for 1000 successive test
cycles at 95°C,capacitors shall meet the characteristic requirements table below.
Surge* Capacitance Change ................Refer to the table above (*1)
Dissipation Factor .....................Initial specified value or less
Leakage Current.........................Initial specified value or less
After 2000 hours application of rated voltage in series with a 3Ω resistor at 95°C,or derated voltage in series with a 3Ω
resistor at 135°C,capacitors shall meet the characteristic requirements table below.
Endurance* Capacitance Change ................. Refer to the table above (*1)
Dissipation Factor ...................... Initial specified value or less
Leakage Current........................... Initial specified value or less
After applying the pressure load of 17.7N for 60 seconds horizontally to the center of capacitor side body
exfoliation nor its sign at the terminal electrode.
Terminal Strength jig at the center of the substrate so that substrate may bend by 1mm as illustrated. Then, there shall be found no
* As for the surge voltage and derated voltage at 135°C, refer to page precautions for details.
040220

F97-HT3 Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

TRM Series – Enhanced Reliability Professional
Grade Multianode - J-Lead
TRM Professional Multianode
FEATURES
• Improved Reliability – 0.5%/1khrs (Twice Better than Standard)
• DCL Reduced by 25% to 0.0075 CV
• Robust Against Higher Thermo-mechanical Stresses During
Assembly Process COMPONENT
• Multi-anode Construction SnPb termination option is not
• Super Low ESR RoHS compliant.
• CV Range 4.7-1500μF / 2.5-50V
• “Mirror” Construction Used With D case Capacitors Reduces ESL to Half
• Automotive, Medical, Aerospace, Military and Other Hi-End Applications
APPLICATIONS
• Automotive, Avionics and Industrial High Power DC/DC Convertors
MULTIANODE TRM D LOW SELF

MULTIANODE INDUCTANCE CONSTRUCTION
CONSTRUCTION “MIRROR” DESIGN
MARKING
D, E, U CASE
227 = 220µF
Polarity
Band 227 A Rated Voltage Code CASE DIMENSIONS: millimeters (inches)
A = 10V
(Anode+)
XXXXX ID Code
EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
U 2924 7361-43 7.30 (0.287) 6.10 (0.240) 4.10 (0.162) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
HOW TO ORDER
TRM E 108 * 004 R 0023
See table pF code: 1st two digits K = ±10% 002 = 2.5Vdc R = Pure Tin 7" Reel
above represent significant figures, M = ±20% 004 = 4Vdc S = Pure Tin 13" Reel
3rd digit represents multiplier 006 = 6.3Vdc H = Tin Lead 7" Reel
(number of zeros to follow) 010 = 10Vdc K = Tin Lead 13" Reel
016 = 16Vdc H, K = Please Contact
025 = 25Vdc
035 = 35Vdc
050 = 50Vdc
Rated Voltage (VR) ≤ +85°C: 2.5 4 6.3 10 12 16 20 25 35 50
Category Voltage (VC) ≤ +125°C: 1.7 2.7 4 7 8 10 13 17 23 33
Surge Voltage (VS) ≤ +85°C: 3.3 5.2 8 13 16 20 26 32 46 65
Surge Voltage (VS) ≤ +125°C: 2.2 3.4 5 8 10 13 16 20 28 40
Reliability: 0.5% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance,
020222


μF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 12V (B) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
4.7 475 D(200)
6.8 685
10 106 D(120)
15 156
D(70)
22 226
E(60,100)
33 336 D(65) E(50,65)
47 476 D(100) D(55) E(65)
68 686
100 107 E(35,45)
150 157 D(45) E(30,40) E(35)
220 227 D(35) E(35) U(30,40)
330 337 D(35) D(35) E(35)
470 477 D(35) E(30) U(23,30)
680 687 E(23) U(18,23)
E(23)
1000 108 D(25)
U(18,23)
E(18)
1500 158
U(18,23)

010622


Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
2.5 Volt @ 85°C
TRMD108*002#0025 D 1000 2.5 85 1.7 125 18.8 8 25 3.194 2.874 1.277 3
TRME158*002#0018 E 1500 2.5 85 1.7 125 28.1 6 18 3.873 3.486 1.549 3
TRMU158*002R0018 U 1500 2.5 85 1.7 125 22.5 6 18 4.048 3.643 1.619 3
TRMU158*002R0023 U 1500 2.5 85 1.7 125 22.5 6 23 3.581 3.223 1.433 3
4 Volt @ 85°C
TRMD337*004#0035 D 330 4 85 2.7 125 9.9 8 35 2.699 2.429 1.080 3
TRMD477*004#0035 D 470 4 85 2.7 125 14.1 8 35 2.699 2.429 1.080 3
TRME687*004#0023 E 680 4 85 2.7 125 20.4 6 23 3.426 3.084 1.370 3
TRME108*004#0023 E 1000 4 85 2.7 125 30 6 23 3.426 3.084 1.370 3
TRMU108*004R0018 U 1000 4 85 2.7 125 30 6 18 4.048 3.643 1.619 3
TRMU108*004R0023 U 1000 4 85 2.7 125 30 6 23 3.581 3.223 1.433 3
6.3 Volt @ 85°C
TRMD337*006#0035 D 330 6.3 85 4 125 14.9 8 35 2.699 2.429 1.080 3
TRME477*006#0030 E 470 6.3 85 4 125 21.2 6 30 3.000 2.700 1.200 3
TRMU687*006R0018 U 680 6.3 85 4 125 30.6 6 18 4.048 3.643 1.619 3
TRMU687*006R0023 U 680 6.3 85 4 125 30.6 6 23 3.581 3.223 1.433 3
10 Volt @ 85°C
TRMD157*010#0045 D 150 10 85 7 125 11.3 8 45 2.380 2.142 0.952 3
TRMD227*010#0035 D 220 10 85 7 125 16.5 8 35 2.699 2.429 1.080 3
TRME337*010#0035 E 330 10 85 7 125 24.8 6 35 2.777 2.500 1.111 3
TRMU477*010R0023 U 470 10 85 7 125 35.3 8 23 3.581 3.223 1.433 3
TRMU477*010R0030 U 470 10 85 7 125 35.3 8 30 3.136 2.822 1.254 3
12 Volt @ 85°C
TRME227*012#0035 E 220 12 85 8.4 125 19.8 6 35 2.777 2.500 1.111 3
16 Volt @ 85°C
TRMD476*016#0100 D 47 16 85 10 125 5.6 8 100 1.597 1.437 0.639 3
TRME157*016#0030 E 150 16 85 10 125 18 6 30 3.000 2.700 1.200 3
TRME157*016#0040 E 150 16 85 10 125 18 6 40 2.598 2.338 1.039 3
TRMU227*016R0030 U 220 16 85 10 125 26.4 8 30 3.136 2.822 1.254 3
TRMU227*016R0040 U 220 16 85 10 125 26.4 8 40 2.716 2.444 1.086 3
20 Volt @ 85°C
TRMD476*020#0055 D 47 20 85 13 125 7.1 8 55 2.153 1.938 0.861 3
TRME107*020#0035 E 100 20 85 13 125 15 6 35 2.777 2.500 1.111 3
TRME107*020#0045 E 100 20 85 13 125 15 6 45 2.449 2.205 0.980 3
TRME157*020#0035 E 150 20 85 13 125 30 10 35 2.777 2.500 1.111 3
25 Volt @ 85°C
TRMD336*025#0065 D 33 25 85 17 125 6.2 8 65 1.981 1.783 0.792 3
TRME476*025#0065 E 47 25 85 17 125 8.8 6 65 2.038 1.834 0.815 3
35 Volt @ 85°C
TRMD106*035#0120 D 10 35 85 23 125 2.6 8 120 1.458 1.312 0.583 3
TRMD226*035#0070 D 22 35 85 23 125 5.8 8 70 1.909 1.718 0.763 3
TRME226*035#0060 E 22 35 85 23 125 5.8 6 60 2.121 1.909 0.849 3
TRME226*035#0100 E 22 35 85 23 125 5.8 6 100 1.643 1.479 0.657 3
TRME336*035#0050 E 33 35 85 23 125 8.7 6 50 2.324 2.091 0.930 3
TRME336*035#0065 E 33 35 85 23 125 8.7 6 65 2.038 1.834 0.815 3
50 Volt @ 85°C
TRMD475*050#0200 D 4.7 50 85 33 125 1.8 8 200 1.129 1.016 0.452 3

010622

QUALIFICATION TABLE
TRM professional multianode series (Temperature range -55ºC to +125ºC)
TEST
DCL initial limit
DF initial limit
for 1-2 hours before measuring.
1 +20 15
2 -55 15
Temperature
3 +20 15 ΔC/C n/a +0/-10% ±5% +10/-0% +12/-0% ±5%
Stability
4 +85 15
5 +125 15
DCL initial limit
DF initial limit
1000Ω
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
040220

High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

TMJ SMD S1gma™ Series – LAT* Professional Grade - J-Lead
TMJ Tantalum
SMD S1gma™ Series Capacitors
The S1gma™ series is offering a next generation of statistical screening
and process control enhancement of tantalum capacitors for professional
applications with improved reliability and extremely low DCL needs. LEAD-FREE COMPATIBLE
COMPONENT
FEATURES SnPb termination option is not

RoHS compliant.
• -55 to +125°C Operation Temperature • (2x Improvement Over Commercial Series)

• Basic Reliability Better than 0.5%/1000 hours • Improved DCL Limits 0.001CV* and 0.005CV
S1gma™ Prime – Utilizes 3 S1gma™ electrical screening to remove possible maverick parts from the
distribution.
S1gma™ Premium – S1gma™ Prime, with addition of capability statistical screening utilizing the
KYOCERA AVX patented Q-Process to effectively remove components that may experience excessive
parametric shifts or instability in operational life.
S1gma™ Pro Custom – A custom option where specific parameter limits and screening methods can be agreed
based on 3 S1gma™ and Q-Process statistical screening based on capability techniques.
TMJ CONSTRUCTION *selected codes, 0.001CV limit is available with S1gma™ Premium and Pro Custom options only
APPLICATIONS
• Wireless Battery Operated Sensors • Avionics
• TPM • Safety Systems
• Automotive • Energy Harvesting
For additional information on Q-process please consult the KYOCERA AVX technical publication
“Reaching the Highest Reliability for Tantalum Capacitors”
MARKING (see the link: http://www.avx.com/docs/techinfo/Qprocess.pdf)
A, B, C, D, E, U CASE CASE DIMENSIONS: millimeters (inches)

227 = 220µF
EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
Polarity
A = 10V
(Anode+)
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
XXXXX ID Code
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
U 2924 7361-43 7.30 (0.287) 6.10 (0.240) 4.10 (0.162) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
HOW TO ORDER W1 dimension applies to the termination width for A dimensional area only.
TMJ D 227 K 006 # C ^ A
Type Case Size Capacitance Code Tolerance Rated DC Packaging ESR Range Suffix DCL
See table pF code: 1st two digits K = ±10% Voltage R = Pure Tin 7" Reel C = Standard QX = S1gma™ Prime A = 0.001CV
above represent significant figures, 006 = 6.3Vdc H = Tin Lead 7" Reel L = Low ESR QY = S1gma™ Premium C = 0.005CV
3rd digit represents multiplier 010 = 10Vdc H = Non RoHS xx = S1gma™ Pro Custom
(number of zeros to follow) 016 = 16Vdc H = Please Contact
025 = 25Vdc
035 = 35Vdc
050 = 50Vdc
Leakage Current DCL: (A) 0.001CV, (C) 0.005CV
Temperature Range: -55ºC to +125°C
Reliability: 0.5% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level
AEC-Q200 per request
020222

TMJ Tantalum
Capacitance Rated voltage (VR) to 85°C (Voltage Code)

0.22 224 A
0.33 334 A A
0.47 474 A B
0.68 684 A B
1.0 105 A B C
1.5 155 A A B C
2.2 225 A A B B C
3.3 335 A A B B C
4.7 475 A A B B C D
6.8 685 A B B C C D
10 106 A A B C C C E
15 156 A B B C C D U
22 226 B B C C D D U
33 336 B C C D D E
47 476 C C D D D U
68 686 C C D E U
100 107 C D E E U
150 157 D D E U
220 227 D E U
330 337 E E
470 477 E U
680 687 U
Released ratings
LEAKAGE CURRENT vs. RATED VOLTAGE

1
Leakage Current
ratio I/IVR Typical
0.1 Range
0.01
0 20 40 60 80 100
Rated Voltage (VR) %
040220

TMJ Tantalum
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
6.3 Volt @ 85°C
TMJA106K006#CQYA A 10 6.3 85 4 125 0.1 6 1500 224 201 89 3
TMJA106K006#C^C A 10 6.3 85 4 125 0.3 6 1500 224 201 89 3
TMJA156K006#CQYA A 15 6.3 85 4 125 0.1 6 1500 224 201 89 3
TMJA156K006#C^C A 15 6.3 85 4 125 0.45 6 1500 224 201 89 3
TMJB226K006#C^C B 22 6.3 85 4 125 0.66 6 600 376 339 151 3
TMJB336K006#C^C B 33 6.3 85 4 125 0.99 6 600 376 339 151 3
TMJC476K006#CQYA C 47 6.3 85 4 125 0.28 6 300 606 545 242 3
TMJC476K006#C^C C 47 6.3 85 4 125 1.41 6 300 606 545 242 3
TMJC686K006#CQYA C 68 6.3 85 4 125 0.41 6 300 606 545 242 3
TMJC686K006#C^C C 68 6.3 85 4 125 2.04 6 300 606 545 242 3
TMJC107K006#CQYA C 100 6.3 85 4 125 0.60 6 300 606 545 242 3
TMJC107K006#C^C C 100 6.3 85 4 125 3 6 300 606 545 242 3
TMJD157K006#CQYA D 150 6.3 85 4 125 0.90 6 200 866 779 346 3
TMJD157K006#C^C D 150 6.3 85 4 125 4.5 6 200 866 779 346 3
TMJD227K006#CQYA D 220 6.3 85 4 125 1.32 8 200 866 779 346 3
TMJD227K006#C^C D 220 6.3 85 4 125 6.6 8 200 866 779 346 3
TMJE337K006#C^C E 330 6.3 85 4 125 9.9 8 200 908 817 363 3
TMJE477K006#CQYA E 470 6.3 85 4 125 2.82 8 200 908 817 363 3
TMJE477K006#C^C E 470 6.3 85 4 125 14.1 8 200 908 817 363 3
TMJU687K006#C^C U 680 6.3 85 4 125 20.4 12 250 812 731 325 3
@
10 Volt 85°C
TMJA475K010#CQXC A 4.7 10 85 7 125 0.24 6 2000 194 174 77 3
TMJA685K010#CQYA A 6.8 10 85 7 125 0.1 6 2000 194 174 77 3
TMJA685K010#C^C A 6.8 10 85 7 125 0.34 6 2000 194 174 77 3
TMJA106K010#CQYA A 10 10 85 7 125 0.10 6 2000 194 174 77 3
TMJA106K010#C^C A 10 10 85 7 125 0.5 6 2000 194 174 77 3
TMJB156K010#C^C B 15 10 85 7 125 0.75 6 700 348 314 139 3
TMJB226K010#C^C B 22 10 85 7 125 1.1 6 700 348 314 139 3
TMJC336K010#C^C C 33 10 85 7 125 1.65 6 300 606 545 242 3
TMJC476K010#C^C C 47 10 85 7 125 2.35 6 300 606 545 242 3
TMJC686K010#C^C C 68 10 85 7 125 3.4 6 300 606 545 242 3
TMJD107K010#C^C D 100 10 85 7 125 5.00 6 150 1000 900 400 3
TMJD157K010#C^C D 150 10 85 7 125 7.50 8 150 1000 900 400 3
TMJE227K010#C^C E 220 10 85 7 125 11 8 150 1049 944 420 3
TMJE337K010#CQYA E 330 10 85 7 125 3.3 8 150 1049 944 420 3
TMJE337K010#C^C E 330 10 85 7 125 16.5 8 150 1049 944 420 3
TMJU477K010#C^C U 470 10 85 7 125 23.5 12 200 908 817 363 3
16 Volt @ 85°C
TMJA225K016#CQXC A 2.2 16 85 10 125 0.18 6 3500 146 132 59 3
TMJA335K016#CQXC A 3.3 16 85 10 125 0.26 6 3500 146 132 59 3
TMJA475K016#C^C A 4.7 16 85 10 125 0.38 6 3500 146 132 59 3
TMJB685K016#C^C B 6.8 16 85 10 125 0.54 6 1200 266 240 106 3
TMJB106K016#C^C B 10 16 85 10 125 0.80 6 1200 266 240 106 3
TMJB156K016#C^C B 15 16 85 10 125 1.20 6 1200 266 240 106 3
TMJC226K016#C^C C 22 16 85 10 125 1.76 6 350 561 505 224 3
TMJC336K016#C^C C 33 16 85 10 125 2.64 6 350 561 505 224 3
TMJD476K016#C^C D 47 16 85 10 125 3.76 6 200 866 779 346 3
TMJD686K016#C^C D 68 16 85 10 125 5.44 6 200 866 779 346 3
TMJE107K016#C^C E 100 16 85 10 125 8.00 6 150 1049 944 420 3
TMJE157K016#C^C E 150 16 85 10 125 12 6 150 1049 944 420 3
TMJU227K016#C^C U 220 16 85 10 125 17.6 1 200 908 817 363 3
20 Volt @ 85°C
TMJA155K020#CQXC A 1.5 20 85 13 125 0.15 6 3000 158 142 63 3
TMJA225K020#CQXC A 2.2 20 85 13 125 0.22 6 3000 158 142 63 3
TMJA335K020#C^C A 3.3 20 85 13 125 0.33 6 3000 158 142 63 3
TMJB475K020#C^C B 4.7 20 85 13 125 0.47 6 1000 292 262 117 3
TMJB685K020#C^C B 6.8 20 85 13 125 0.68 6 1000 292 262 117 3
TMJC106K020#C^C C 10 20 85 13 125 1 6 500 469 422 188 3
TMJC156K020#C^C C 15 20 85 13 125 1.5 6 500 469 422 188 3
TMJC226K020#C^C C 22 20 85 13 125 2.2 6 500 469 422 188 3
TMJD336K020#C^C D 33 20 85 13 125 3.3 6 250 775 697 310 3
TMJD476K020#C^C D 47 20 85 13 125 4.70 6 250 775 697 310 3
TMJE686K020#C^C E 68 20 85 13 125 6.8 6 200 908 817 363 3
TMJE107K020#C^C E 100 20 85 13 125 10 6 200 908 817 363 3
TMJU157K020#CQXC U 150 20 85 13 125 15 12 250 812 731 325 3
25 Volt @ 85°C
TMJA105K025#CQXC A 1 25 85 17 125 0.13 4 3000 158 142 63 3
TMJA155K025#CQXC A 1.5 25 85 17 125 0.19 6 3000 158 142 63 3
TMJB225K025#C^C B 2.2 25 85 17 125 0.28 6 2000 206 186 82 3
TMJB335K025#C^C B 3.3 25 85 17 125 0.41 6 2000 206 186 82 3
040220

TMJ Tantalum
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
TMJB475K025#C^C B 4.7 25 85 17 125 0.59 6 2000 206 186 82 3
TMJC685K025#C^C C 6.8 25 85 17 125 0.85 6 600 428 385 171 3
TMJC106K025#C^C C 10 25 85 17 125 1.25 6 600 428 385 171 3
TMJC156K025#C^C C 15 25 85 17 125 1.88 6 600 428 385 171 3
TMJD226K025#CQYA D 22 25 85 17 125 0.55 6 400 612 551 245 3
TMJD226K025#C^C D 22 25 85 17 125 2.75 6 400 612 551 245 3
TMJD336K025#CQYA D 33 25 85 17 125 0.82 6 400 612 551 245 3
TMJD336K025#C^C D 33 25 85 17 125 4.13 6 400 612 551 245 3
TMJD476K025#C^C D 47 25 85 17 125 5.88 6 400 612 551 245 3
TMJU686K025#CQXC U 68 25 85 17 125 8.5 12 450 606 545 242 3
TMJU107K025#CQXC U 100 25 85 17 125 12.5 12 450 606 545 242 3
35 Volt @ 85°C
TMJA334K035#CQXC A 0.33 35 85 23 125 0.1 4 6000 112 101 45 3
TMJA474K035#CQXC A 0.47 35 85 23 125 0.1 4 6000 112 101 45 3
TMJA684K035#CQXC A 0.68 35 85 23 125 0.12 4 6000 112 101 45 3
TMJB105K035#CQXC B 1 35 85 23 125 0.18 4 2500 184 166 74 3
TMJB155K035#C^C B 1.5 35 85 23 125 0.26 6 2500 184 166 74 3
TMJB225K035#C^C B 2.2 35 85 23 125 0.39 6 2500 184 166 74 3
TMJB335K035#C^C B 3.3 35 85 23 125 0.58 6 2500 184 166 74 3
TMJC475K035#CQYA C 4.7 35 85 23 125 0.16 6 600 428 385 171 3
TMJC475K035#C^C C 4.7 35 85 23 125 0.82 6 600 428 385 171 3
TMJC685K035#C^C C 6.8 35 85 23 125 1.19 6 600 428 385 171 3
TMJC106K035#C^C C 10 35 85 23 125 1.75 6 600 428 385 171 3
TMJD156K035#CQYA D 15 35 85 23 125 0.52 6 400 612 551 245 3
TMJD156K035#C^C D 15 35 85 23 125 2.63 6 400 612 551 245 3
TMJD226K035#CQYA D 22 35 85 23 125 0.77 6 400 612 551 245 3
TMJD226K035#C^C D 22 35 85 23 125 3.85 6 400 612 551 245 3
TMJE336K035#CQYA E 33 35 85 23 125 1.15 6 250 812 731 325 3
TMJE336K035#C^C E 33 35 85 23 125 5.78 6 250 812 731 325 3
TMJU476K035#CQXC U 47 35 85 23 125 8.23 12 300 742 667 297 3
TMJU476K035#CQYA U 47 35 85 23 125 1.64 12 300 742 667 297 3
50 Volt @ 85°C
TMJA224K050#CQXC A 0.22 50 85 33 125 0.1 4 7000 104 93 41 3
TMJA334K050#CQXC A 0.33 50 85 33 125 0.1 4 7000 104 93 41 3
TMJB474K050#CQXC B 0.47 50 85 33 125 0.12 4 2000 206 186 82 3
TMJB684K050#CQXC B 0.68 50 85 33 125 0.17 4 2000 206 186 82 3
TMJC105K050#C^C C 1 50 85 33 125 0.25 4 1500 271 244 108 3
TMJC155K050#C^C C 1.5 50 85 33 125 0.38 6 1500 271 244 108 3
TMJC225K050#CQYA C 2.2 50 85 33 125 0.11 6 1500 271 244 108 3
TMJC225K050#C^C C 2.2 50 85 33 125 0.55 6 1500 271 244 108 3
TMJC335K050#CQYA C 3.3 50 85 33 125 0.17 6 1500 271 244 108 3
TMJC335K050#C^C C 3.3 50 85 33 125 0.83 6 1500 271 244 108 3
TMJD475K050#C^C D 4.7 50 85 33 125 1.18 4.5 600 500 450 200 3
TMJD685K050#C^C D 6.8 50 85 33 125 1.7 4.5 600 500 450 200 3
TMJE106K050#CQYA E 10 50 85 33 125 0.5 4.5 400 642 578 257 3
TMJE106K050#C^C E 10 50 85 33 125 2.5 4.5 400 642 578 257 3
TMJU156K050#CQXC U 15 50 85 33 125 3.75 12 450 606 545 242 3
TMJU226K050#CQXC U 22 50 85 33 125 5.5 12 450 606 545 242 3
Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured
at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. The EIA & CECC standards for low ESR Solid Tantalum
Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting. For typical weight and composition see page 259.
082421

TMJ Tantalum
QUALIFICATION TABLE
TMJ S1gma™ series (Temperature range -55ºC to +125ºC)
TEST
DCL 2 x initial limit
DF initial limit
Store at 125ºC, no voltage applied, for 2000 hours. DCL 2 x initial limit
Store at 65ºC and 90 - 95% relative humidity for 500
Humidity ΔC/C within ±10% of initial value
temperature and humidity for 1-2 hours before
measuring.
1 +20 15
2 -55 15
DCL IL* n/a IL* 10 x IL* 15 x IL* 1.5 x IL*
Stability 4 +85 15
5 +125 15
DF initial limit
1000Ω
DCL initial limit
Mechanical
Shock
DF initial limit
ESR initial limit
DCL initial limit
DF initial limit
ESR initial limit
*Initial Limit
040220

TMJ Tantalum
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

THJ Series – High Temperature (175°C max.) - J-Lead
THJ Series
High Temperature Tantalum Chip Capacitor
FEATURES
• Improved Reliability – 2x Standard
• 175°C @ 0.5VR Continuous Operation
COMPONENT
• CV Range: 0.10-220μF / 6.3-50V
• 5 Case Sizes Available RoHS compliant.
• Low ESR options on approval
• High Temperature Automotive and Industry Applications
APPLICATIONS
• Automotive ECU and ABS Control Electronics
• Geothermal Instrumentation

EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
MARKING D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
A, B, C, D, E CASE E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
HOW TO ORDER
THJ B 105 * 035 R JN –
See table pF code: 1st two digits K = ±10% 006=6.3Vdc R = Pure Tin 7" Reel Suffix characters may be
above represent significant figures M = ±20% 010=10Vdc S = Pure Tin 13" Reel OR added for special
3rd digit represents multiplier 016=16Vdc A = Gold Plating 7" Reel requirements
(number of zeros to follow) 020=20Vdc B = Gold Plating 13" Reel 0100 V = Dry pack Option
025=25Vdc H = Tin Lead 7" Reel
035=35Vdc K = Tin Lead 13" Reel
050=50Vdc H, K = Non RoHS Low ESR
A, B, H, K = Please in mΩ
Contact Manufacturer
Temperature Range: -55ºC to 175°C voltage derating.
Reliability: 0.5% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance,
60% confidence level, 3.5 Fits at 40°C, 0.5VR
Termination Finish: Sn Plating (standard), Gold and SnPb Plating upon request
020222

THJ Series

0.10 104 A
0.15 154 A
0.22 224 A
0.33 334 A
0.47 474 A B
0.68 684 A B
1.0 105 A A/B
1.5 155 A C
2.2 225 A/A(1500) B/B(1500) C
3.3 335 A A B C D
4.7 475 A A A/B C D
6.8 685 A A A/B C D D
10 106 A A/B B C D D/E
15 156 B B B C D
22 226 B B C/C(500) D D/D(300)
33 336 B C C D D E/E(150)
47 476 C C C/D
68 686 C D D
100 107 D D E
150 157 D
220 227 E

THJ 175°C Voltage vs Temperature Rating
120%
100%
100% 100% 100%
80%
80%
60% 66% Rated range
40% 50%
20%
0%
-55°C 0°C 40°C 60°C 85°C 105°C 125°C 175°C
040220

THJ Series
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC 175ºC
(Ω)
6.3 Volt @ 85°C
THJA475*006#JN A 4.7 6.3 85 3 175 0.5 6 6 112 101 45 22 1
THJA685*006#JN A 6.8 6.3 85 3 175 0.5 4.5 2.6 170 153 68 34 1
THJA106*006#JN A 10 6.3 85 3 175 0.6 4.5 2.2 185 166 74 37 1
THJB156*006#JN B 15 6.3 85 3 175 0.9 6 2.5 184 166 74 37 1
THJB226*006#JN B 22 6.3 85 3 175 1.4 6 2.5 184 166 74 37 1
THJB336*006#JN B 33 6.3 85 3 175 2.1 6 2.2 197 177 79 39 1
THJC476*006#JN C 47 6.3 85 3 175 3.0 6 1.6 262 236 105 52 1
THJC686*006#JN C 68 6.3 85 3 175 4.3 6 1.5 271 244 108 54 1
THJD107*006#JN D 100 6.3 85 3 175 6 4.5 0.4 612 551 245 122 11)
THJD157*006#JN D 150 6.3 85 3 175 9.5 6 0.9 408 367 163 82 11)
10 Volt @ 85°C
THJA335*010#JN A 3.3 10 85 5 175 0.5 6 5.5 117 105 47 23 1
THJA475*010#JN A 4.7 10 85 5 175 0.5 4.5 2.9 161 145 64 32 1
THJA685*010#JN A 6.8 10 85 5 175 0.7 4.5 2.6 170 153 68 34 1
THJA106*010#JN A 10 10 85 5 175 1 6 2.7 167 150 67 33 1
THJB106*010#JN B 10 10 85 5 175 1 4.5 1.8 217 196 87 43 1
THJB156*010#JN B 15 10 85 5 175 1.5 4.5 1.5 238 214 95 48 1
THJB226*010#JN B 22 10 85 5 175 2.2 6 2.4 188 169 75 38 1
THJC336*010#JN C 33 10 85 5 175 3.3 6 1.6 262 236 105 52 1
THJC476*010#JN C 47 10 85 5 175 4.7 4.5 0.5 469 422 188 94 1
THJD686*010#JN D 68 10 85 5 175 6.8 4.5 0.4 612 551 245 122 11)
THJD107*010#JN D 100 10 85 5 175 10 6 0.9 408 367 163 82 11)
THJE227*010#JN E 220 10 85 5 175 22 10 0.5 574 517 230 115 11)
16 Volt @ 85°C
THJA225*016#JN A 2.2 16 85 8 175 0.5 4.5 3 158 142 63 32 1
THJA225*016#1500 A 2.2 16 85 8 175 0.5 4.5 1.5 224 201 89 45 1
THJA335*016#JN A 3.3 16 85 8 175 0.5 6 5 122 110 49 24 1
THJA475*016#JN A 4.7 16 85 8 175 0.8 4.5 2.9 161 145 64 32 1
THJB475*016#JN B 4.7 16 85 8 175 0.8 6 3.5 156 140 62 31 1
THJA685*016#JN A 6.8 16 85 8 175 1.1 6 3.5 146 132 59 29 1
THJB685*016#JN B 6.8 16 85 8 175 1.1 6 2.5 184 166 74 37 1
THJB106*016#JN B 10 16 85 8 175 1.6 4.5 2.8 174 157 70 35 1
THJB156*016#JN B 15 16 85 8 175 2.4 6 2 206 186 82 41 1
THJC226*016#JN C 22 16 85 8 175 3.5 6 1.6 262 236 105 52 1
THJC226*016#0500 C 22 16 85 8 175 3.5 4.5 0.5 469 422 188 94 1
THJC336*016#JN C 33 16 85 8 175 5.3 6 1.5 271 244 108 54 1
THJC476*016#JN C 47 16 85 8 175 7.5 6 0.8 371 334 148 74 1
THJD476*016#JN D 47 16 85 8 175 7.5 6 0.9 408 367 163 82 11)
THJD686*016#JN D 68 16 85 8 175 10.9 4.5 0.9 408 367 163 82 11)
THJE107*016#JN E 100 16 85 8 175 16 8 0.4 642 578 257 128 11)
20 Volt @ 85°C
THJA155*020#JN A 1.5 20 85 10 175 0.5 6 6.5 107 97 43 21 1
THJB335*020#JN B 3.3 20 85 10 175 0.7 6 3 168 151 67 34 1
THJC156*020#JN C 15 20 85 10 175 3.0 6 1.7 254 229 102 51 1
THJD336*020#JN D 33 20 85 10 175 6.6 6 0.9 408 367 163 82 11)
25 Volt @ 85°C
THJA474*025#JN A 0.47 25 85 12 175 0.5 4 14 73 66 29 15 1
THJA684*025#JN A 0.68 25 85 12 175 0.5 4 10 87 78 35 17 1
THJA105*025#JN A 1.0 25 85 12 175 0.5 3 5.2 120 108 48 24 1
THJB225*025#JN B 2.2 25 85 12 175 0.6 6 4.5 137 124 55 27 1
THJB225*025#1500 B 2.2 25 85 12 175 0.6 6 1.5 238 214 95 48 1
THJC685*025#JN C 6.8 25 85 12 175 1.7 6 2 235 211 94 47 1
THJC106*025#JN C 10 25 85 12 175 2.5 6 1.8 247 222 99 49 1
THJD226*025#JN D 22 25 85 12 175 5.5 6 0.9 408 367 163 82 11)
THJD336*025#JN D 33 25 85 12 175 8.3 6 0.9 408 367 163 82 11)
35 Volt @ 85°C
THJA104*035#JN A 0.1 35 85 17 175 0.5 4 24 56 50 22 11 1
THJA154*035#JN A 0.15 35 85 17 175 0.5 4 21 60 54 24 12 1
THJA224*035#JN A 0.22 35 85 17 175 0.5 4 18 65 58 26 13 1
THJA334*035#JN A 0.33 35 85 17 175 0.5 4 15 71 64 28 14 1
THJB474*035#JN B 0.47 35 85 17 175 0.5 4 10 92 83 37 18 1
THJB684*035#JN B 0.68 35 85 17 175 0.5 4 8 103 93 41 21 1
THJA105*035#JN A 1.0 35 85 17 175 0.5 4 7.5 100 90 40 20 1
THJB105*035#JN B 1.0 35 85 17 175 0.5 4 6.5 114 103 46 23 1
THJC155*035#JN C 1.5 35 85 17 175 0.5 6 4.5 156 141 63 31 1
THJC225*035#JN C 2.2 35 85 17 175 0.8 6 3.5 177 160 71 35 1
THJC335*035#JN C 3.3 35 85 17 175 1.2 6 2.5 210 189 84 42 1
THJC475*035#JN C 4.7 35 85 17 175 1.6 6 2.2 224 201 89 45 1
THJD685*035#JN D 6.8 35 85 17 175 2.4 6 1.3 340 306 136 68 11)
040220

THJ Series
Size (μF) @ 100kHz
(Ω)
THJD106*035#JN D 10 35 85 17 175 3.5 6 1 387 349 155 77 11)
THJD156*035#JN D 15 35 85 17 175 5.3 6 0.9 408 367 163 82 11)
THJD226*035#JN D 22 35 85 17 175 7.7 6 0.6 500 450 200 100 11)
THJD226*035#0300 D 22 35 85 17 175 7.7 6 0.3 707 636 283 141 11)
THJE336*035#JN E 33 35 85 17 175 11.6 6 0.5 574 517 230 115 11)
THJE336*035#0150 E 33 35 85 17 175 11.6 6 0.15 1049 944 420 210 11)
50 Volt @ 85°C
THJD335*050#JN D 3.3 50 85 25 175 1.7 6 1.1 369 332 148 74 11)
THJD475*050#JN D 4.7 50 85 25 175 2.4 6 0.9 463 417 185 93 11)
THJD685*050#JN D 6.8 50 85 25 175 3.4 6 0.7 408 367 163 82 11)
THJD106*050#JN D 10 50 85 25 175 5 6 0.7 463 417 185 93 11)
THJE106*050#JN E 10 50 85 25 175 5 6 0.7 486 437 194 97 11)

All PNs also available with Dry pack option - MSL 3 (see How to order).
1)
–Dry pack option (see How to order) is recommended for reduction of stress during soldering.
081821

THJ Series
QUALIFICATION TABLE
THJ series (Temperature range -55ºC to +175ºC)
TEST
1 +20 15
Temperature
Stability
3 +20 15 ΔC/C n/a +0/-10% ±5% +10/-0% +18/-0% ±5%
4 +125 15
5 +175 15
Voltage discharge) through a charge / discharge resistance
of 1000Ω DF initial limit
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
040220

THJ Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

THJ Extended Series – High Temperature (200°C max.) - J-Lead
THJ Extended Series

High Temperature (200°C max.) - J-Lead
FEATURES
• SMD 200ºC Tantalum Capacitor
• 200°C @ 0.33VR 1000hrs Continuous Operation
• Leakage Current After 200ºC 1000hrs Less than 1mA
• 3x Reflow 260°C LEAD-FREE COMPATIBLE
COMPONENT
• Gold Plated Termination for Hybrid Assembly
• Oil Drilling, Aerospace, Automotive Applications
• CV Range: 10-220μF / 10-16V
APPLICATIONS
• Downhole Drilling
EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
MARKING W1 dimension applies to the termination width for A dimensional area only.
B, E CASE
HOW TO ORDER
THJ E 107 * 016 # JH –
See table pF code: 1st two digits K = ±10% 010 = 10Vdc A = Gold Plating 7" Reel Suffix characters may be
above represent significant figures M = ±20% 016 = 16Vdc B = Gold Plating 13" Reel added for special
3rd digit represents multiplier requirements
(number of zeros to follow) V = Dry pack Option
Leakage Current DCL @ VR 25ºC 0.01CV
Leakage Current DCL @ VC 200ºC, 1000 hrs 1mA
Rated Voltage (VR) ≤ +85°C: 10 16
Category Voltage (VC) ≤ +200°C: 3.3 5.3
Surge Voltage (VS) ≤ +85°C: 13 20
Surge Voltage (VS) ≤ +200°C: 4.3 6.5
Temperature Range: -55ºC up 200ºC with voltage derating
Reliability: 0.5% per 1000 hours at 85ºC, VR with 0.1Ω/V series impedance,
1000 hrs at 200ºC, 0.33VR
Termination Finished: Gold Plating
102720

THJ Extended Series

μF Code 10V (A) 16V (C)
10 106 B
15 156
100 107 E
150 157
220 227 E
Released ratings
DCL Max. ESR 100kHz RMS Current (mA)

Rated Rated Category Category DCL Max. DF
Case Capacitance @ VC 200ºC Max.
Part Number Voltage Temperature Voltage Temperature @ VR 25ºC Max. MSL
Size (μF) 1000 hrs @ 100kHz
(mA) (Ω)
10 Volt @ 85°C
THJE227*010#JH E 220 10 85 3.3 200 22 1.0 10 0.25 812 731 162 81 11)
16 Volt @ 85°C
THJB106*016#JH B 10 16 85 5.3 200 1.6 1.0 6 2.8 174 157 35 17 1
THJE107*016#JH E 100 16 85 5.3 200 16 1.0 8 0.25 812 731 162 81 11)

All PNs also available with Dry pack option - MSL 3 (see How to order).
1)
–Dry pack option (see How to order) recommended for reduction of stress during soldering.
Base terminations material is copper for E case size and Nilo42 for B case size.
081821

THJ Extended Series
QUALIFICATION TABLE
THJ 200ºC series (Temperature range -55ºC to +200ºC)
TEST
1-2 hours before measuring. DF initial limit
1 +20 15
2 -55 15
Temperature
3 +20 15 ΔC/C n/a +0/-10% ±5% +10/-0% +18/-0% ±5%
Stability
4 +85 15
5 +125 15
DCL initial limit
Mechanical
Shock
DF initial limit
ESR initial limit
DCL initial limit
DF initial limit
ESR initial limit
*Initial Limit
THJ 200°C Voltage vs Temperature Rating

120%
100%
100% 100% 100%
80%
80%
60% 66% Rated range
40% 50%
33%
20%
0%
-55°C 0°C 40°C 60°C 85°C 105°C 125°C 175°C 200°C
040220

THJ Extended Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

TACmicrochip®
TAC Series – Standard and Low Profile TACmicrochip®
TAC Series
Standard and Low Profile Tantalum Microchip Capacitors
FEATURES
• The World’s Smallest Surface Mount Tantalum Capacitor
• CV Range: 0.10-150μF / 2-25V
LEAD-FREE
COMPATIBLE
APPLICATIONS COMPONENT
• Hearing Aids, Non-Life Support Medical, Long Life Miniature Designs

• Industrial and Hand-held and Wearable Applications

Minimum
EIA EIA L+0.20 (0.008) W+0.15 (0.006) H+0.15 (0.006) Termination
Code Termination
L Code Metric -0.00 (0.000) -0.00 (0.000) -0.00 (0.000) Spacing(S)
Length (Lt)
3.20 ± 0.20 1.60 ± 0.20 1.60 ± 0.20
A 1206 3216-18 1.80 (0.071) min 0.15 (0.006)
(0.126 ± 0.008) (0.063 ± 0.008) (0.063 ± 0.008)
3.50 ± 0.20 2.80 +0.20
-0.10
B 1210 3528-15 1.50 (0.059) max 2.00 (0.079) min 0.15 (0.006)
POLARITY BAND NOT TO (0.138 ± 0.008) (0.110 +0.008 )
EXCEED CENTER LINE -0.004
+0.20 +0.20
0.50 -0.00 0.50 -0.00
K 0402 1005-07 1.00 (0.039) +0.008 +0.008 0.40 (0.016) min 0.10 (0.004)
H (0.020 -0.000 ) (0.020 -0.000 )
L 0603 1608-10 1.60 (0.063) 0.85 (0.033) 0.85 (0.033) 0.55 (0.022) min 0.15 (0.006)
S Lt W
R 0805 2012-15 2.00 (0.079) 1.35 (0.053) 1.35 (0.053) 0.70 (0.028) min 0.15 (0.006)
MARKING LOW PROFILE CASE DIMENSIONS: millimeters (inches)

A, B, H, I, K, L, R, T, U, V CASE Minimum
EIA EIA L+0.20 (0.008) W+0.15 (0.006) Termination
Code H max Termination
Code Metric -0.00 (0.000) -0.00 (0.000) Spacing(S)
Length (Lt)
H 0805 2012-10 2.00 (0.079) 1.35 (0.053) 1.00 (0.039) 0.70 (0.028) min 0.15 (0.006)
Polarity 3.20±0.20 1.60±0.20
Band I 1206 3216-05 0.50 (0.020) 1.80 (0.071) min. 0.15 (0.006)
(Anode+) (0.126±0.008) (0.063±0.008)
3.50 ± 0.20 2.80 +0.20
-0.10
T 1210 3528-12 1.20 (0.047) 2.00 (0.079) min 0.15 (0.006)
(0.138 ± 0.008) (0.110 +0.008 )
-0.004
U 0805 2012-06 2.00 (0.079) 1.35 (0.053) 0.60 (0.024) 0.70 (0.028) min 0.15 (0.006)
3.20 ± 0.20 1.60 ± 0.20
V 1206 3216-08 0.75 (0.030) 1.80 (0.071) min 0.15 (0.006)
(0.126 ±0.008) (0.063 ± 0.008)
HOW TO ORDER
TAC L 226 * 004 R TA
Type Case Size Capacitance Code Tolerance Rated DC Packaging Alternative

TACmicrochip® See table pF code: 1st two digits K = ±10% Voltage R, P = 7" Standard Tin characters
above represent significant figures, M = ±20% 002=2Vdc Termination Plastic Tape may be used
3rd digit represents multiplier 003=3Vdc X, Q = 41⁄4" Standard Tin for special
(number of zeros to follow) 004=4Vdc Termination Plastic Tape requirements
006=6.3Vdc A, M = 7" Gold Termination
010=10Vdc Plastic Tape
016=16Vdc F, N = 4¼" Gold Termination
025=25Vdc
Rated Voltage (VR) ≤ +85°C: 2 3 4 6.3 10 16 20 25
Category Voltage (VC) ≤ +125°C: 1.3 2 2.7 4 7 10 13 17
Surge Voltage (VS) ≤ +85°C: 2.7 3.9 5.2 8 13 20 26 32
Surge Voltage (VS) ≤ +125°C: 1.7 2.6 3.2 5 8 12 16 20
Termination Finish: Tin Plating over Nickel (standard), Gold Plating over Nickel option available upon request
081321

TAC Series
STANDARD MICROCHIP CAPACITANCE AND RATED VOLTAGE RANGE
Capacitance Voltage Rating DC (VR) at 85°C

μF Code 2.0V 3.0V 4.0V 6.3V 10V 16V 20V 25V
0.10 104 K
0.15 154 K K
0.22 224 K K K
0.33 334 K K
0.47 474 K/L L
0.68 684 K/L L
1.0 105 K/L K/L/R L R
1.5 155 L L L
2.2 225 K/L L K/L L L
3.3 335 K/L K/L L L L/R R
4.7 475 K/L K/L L L L/R R
6.8 685 K/L L L L/R L/R
10 106 K/L L L/R L/R L/R R
15 156 R L/R L/R R
22 226 R L/R L/R R R
33 336 R R R R A/R
47 476 R R R A/R B
68 686 R A/R A
100 107 A/R A/R A
150 157 A
220 227
LOW PROFILE MICROCHIP CAPACITANCE AND RATED VOLTAGE RANGE


μF Code 2.0V 3.0V 4.0V 6.3V 10V 16V
1.0 105 U
1.5 155
2.2 225 U
3.3 335 U
4.7 475 U
6.8 685
10 106 U |(M) H/V
15 156 H V
22 226 H
33 336 H
47 476 H T
68 686 T
100 107 T

Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher voltage ratings in the same case
size, to the same reliability standards.
040220

TAC Series
Rated Rated Category ESR Max. 100kHz RMS
Case Capacitance Category DCL Max. DF Max. Product
Part Number Voltage Temp. Temperature @ 100kHz Current (mA) MSL
Size (μF) Voltage (V) (μA) (%) Category
(V) (ºC) (ºC) (Ω) 25ºC 85ºC 125ºC
2 Volt @ 85°C
TACK335*002#TA K 3.3 2 85 1.3 125 0.5 8 15 32 28 13 3 1
TACL335*002#TA L 3.3 2 85 1.3 125 0.5 6 7.5 58 52 23 2 1
TACK475*002#TA K 4.7 2 85 1.3 125 0.5 12 15 32 28 13 3 1
TACL475*002#TA L 4.7 2 85 1.3 125 0.5 6 7.5 58 52 23 1 1
TACK685*002#TA K 6.8 2 85 1.3 125 0.5 20 15 32 28 13 3 1
TACL685*002#TA L 6.8 2 85 1.3 125 0.5 6 7.5 58 52 23 2 1
TACK106*002#TA K 10 2 85 1.3 125 0.5 15 15 32 28 13 3 1
TACL106*002#TA L 10 2 85 1.3 125 0.5 10 7.5 58 52 23 3 1
TACU106*002#TA U 10 2 85 1.3 125 0.5 8 5 84 75 33 1 1
TACR226*002#TA R 22 2 85 1.3 125 0.5 8 5 95 85 38 1 1
TACR336*002#TA R 33 2 85 1.3 125 0.7 10 5 95 85 38 2 1
TACR476*002#TA R 47 2 85 1.3 125 0.9 10 5 95 85 38 2 1
TACR686*002#TA R 68 2 85 1.3 125 1.4 14 5 95 85 38 2 1
TACA157*002#TA A 150 2 85 1.3 125 3 20 1 200 180 80 2 1
3 Volt @ 85°C
TACK225*003#TA K 2.2 3 85 2 125 0.5 6 15 32 28 13 2 1
TACL225*003#TA L 2.2 3 85 2 125 0.5 6 7.5 58 52 23 1 1
TACK335*003#TA K 3.3 3 85 2 125 0.5 8 15 32 28 13 3 1
TACL335*003#TA L 3.3 3 85 2 125 0.5 6 7.5 58 52 23 2 1
TACK475*003#TA K 4.7 3 85 2 125 0.5 12 15 32 28 13 3 1
TACL475*003#TA L 4.7 3 85 2 125 0.5 6 7.5 58 52 23 1 1
TACL685*003#TA L 6.8 3 85 2 125 0.5 6 7.5 58 52 23 2 1
TACL106*003#TA L 10 3 85 2 125 0.5 10 7.5 58 52 23 3 1
TACR156*003#TA R 15 3 85 2 125 0.5 8 5 95 85 38 1 1
TACL226*003#TA L 22 3 85 2 125 0.7 20 7.5 58 52 23 3 1
TACR226*003#TA R 22 3 85 2 125 0.7 8 5 95 85 38 1 1
TACR336*003#TA R 33 3 85 2 125 1 10 5 95 85 38 2 1
TACH476*003#TA H 47 3 85 2 125 1.4 20 5 89 80 36 3 1
TACR476*003#TA R 47 3 85 2 125 1.5 10 5 95 85 38 2 1
TACA686*003#TA A 68 3 85 2 125 2 15 2 141 127 57 1 1
TACR686*003#TA R 68 3 85 2 125 2 14 5 95 85 38 3 1
TACA107*003#TA A 100 3 85 2 125 3 15 1 200 180 80 2 1
TACR107*003#TA R 100 3 85 2 125 3 30 5 95 85 38 3 1
4 Volt @ 85°C
TACL155*004#TA L 1.5 4 85 2.7 125 0.5 6 7.5 58 52 23 1 1
TACL225*004#TA L 2.2 4 85 2.7 125 0.5 6 7.5 58 52 23 1 1
TACL335*004#TA L 3.3 4 85 2.7 125 0.5 6 7.5 58 52 23 2 1
TACL475*004#TA L 4.7 4 85 2.7 125 0.5 6 7.5 58 52 23 1 1
TACU475*004#TA U 4.7 4 85 2.7 125 0.5 8 5 84 75 33 1 1
TACL685*004#TA L 6.8 4 85 2.7 125 0.5 8 7.5 58 52 23 2 1
TACL106*004#TA L 10 4 85 2.7 125 0.5 10 7.5 58 52 23 2 1
TACR106*004#TA R 10 4 85 2.7 125 0.5 8 5 95 85 38 1 1
TACL156*004#TA L 15 4 85 2.7 125 0.6 20 7.5 58 52 23 3 1
TACR156*004#TA R 15 4 85 2.7 125 0.6 8 5 95 85 38 1 1
TACL226*004#TA L 22 4 85 2.7 125 0.9 20 7.5 58 52 23 3 1
TACR226*004#TA R 22 4 85 2.7 125 0.9 8 5 95 85 38 1 1
TACH336*004#TA H 33 4 85 2.7 125 1.3 14 5 89 80 36 2 1
TACR336*004#TA R 33 4 85 2.7 125 1.3 10 5 95 85 38 2 1
TACR476*004#TA R 47 4 85 2.7 125 1.9 14 5 95 85 38 3 1
TACA686*004#TA A 68 4 85 2.7 125 2.7 15 1 200 180 80 1 1
TACA107*004#TA A 100 4 85 2.7 125 4 20 1 200 180 80 2 1
TACR107*004#TA R 100 4 85 2.7 125 4 30 5 95 85 38 3 1
6.3 Volt @ 85°C
TACK105*006#TA K 1 6.3 85 4 125 0.5 6 15 32 28 13 2 1
TACL105*006#TA L 1 6.3 85 4 125 0.5 6 7.5 58 52 23 1 1
TACL155*006#TA L 1.5 6.3 85 4 125 0.5 6 7.5 58 52 23 1 1
TACK225*006#TA K 2.2 6.3 85 4 125 0.5 8 15 32 28 13 3 1
TACL225*006#TA L 2.2 6.3 85 4 125 0.5 6 7.5 58 52 23 1 1
TACL335*006#TA L 3.3 6.3 85 4 125 0.5 6 7.5 58 52 23 2 1
TACU335*006#TA U 3.3 6.3 85 4 125 0.5 8 5 84 75 33 1 1
TACL475*006#TA L 4.7 6.3 85 4 125 0.5 8 7.5 58 52 23 2 1
TACL685*006#TA L 6.8 6.3 85 4 125 0.5 10 7.5 58 52 23 2 1
TACR685*006#TA R 6.8 6.3 85 4 125 0.5 8 5 95 85 38 1 1
TACI106M006#TA I 10 6.3 85 4 125 0.6 20 5 84 75 33 2 1
TACL106*006#TA L 10 6.3 85 4 125 0.6 10 6 65 58 26 2 1
TACR106*006#TA R 10 6.3 85 4 125 0.6 8 5 95 85 38 1 1
TACH156*006#TA H 15 6.3 85 4 125 0.9 8 5 89 80 36 3 1
TACL156*006#TA L 15 6.3 85 4 125 0.9 20 7.5 58 52 23 3 1
TACR156*006#TA R 15 6.3 85 4 125 0.9 8 5 95 85 38 1 1
042020

TAC Series
Rated Rated Category Category ESR Max. 100kHz RMS
Case Capacitance DCL Max. DF Max. Product
Part Number Voltage Temp. Voltage Temperature @ 100kHz Current (mA) MSL
Size (μF) (μA) (%) Category
(V) (ºC) (V) (ºC) (Ω) 25ºC 85ºC 125ºC
TACH226*006#TA H 22 6.3 85 4 125 1.4 10 5 89 80 36 2 1
TACR226*006#TA R 22 6.3 85 4 125 1.4 10 5 95 85 38 1 1
TACR336*006#TA R 33 6.3 85 4 125 2.1 12 5 95 85 38 2 1
TACA476*006#TA A 47 6.3 85 4 125 3 15 1 200 180 80 1 1
TACR476*006#TA R 47 6.3 85 4 125 3 20 5 95 85 38 3 1
TACT686*006#TA T 68 6.3 85 4 125 4.3 15 1 200 180 80 2 1
TACA107*006#TA A 100 6.3 85 4 125 6.3 20 1 200 180 80 2 1
TACT107*006#TA T 100 6.3 85 4 125 6.3 12 1 200 180 80 2 1
10 Volt @ 85°C
TACK154*010#TA K 0.15 10 85 7 125 0.5 6 40 19 17 8 1 1
TACK224*010#TA K 0.22 10 85 7 125 0.5 6 30 22 20 9 1 1
TACK334*010#TA K 0.33 10 85 7 125 0.5 6 20 27 25 11 1 1
TACK474*010#TA K 0.47 10 85 7 125 0.5 6 15 32 28 13 1 1
TACL474*010#TA L 0.47 10 85 7 125 0.5 6 7.5 58 52 23 1 1
TACK684*010#TA K 0.68 10 85 7 125 0.5 8 15 32 28 13 2 1
TACL684*010#TA L 0.68 10 85 7 125 0.5 6 7.5 58 52 23 1 1
TACK105*010#TA K 1 10 85 7 125 0.5 6 15 32 28 13 2 1
TACL105*010#TA L 1 10 85 7 125 0.5 6 7.5 58 52 23 1 1
TACR105*010#TA R 1 10 85 7 125 0.5 6 7 80 72 32 1 1
TACL155*010#TA L 1.5 10 85 7 125 0.5 6 7.5 58 52 23 1 1
TACL225*010#TA L 2.2 10 85 7 125 0.5 6 7.5 58 52 23 1 1
TACU225*010#TA U 2.2 10 85 7 125 0.5 8 5 84 75 33 1 1
TACL335*010#TA L 3.3 10 85 7 125 0.5 8 7.5 58 52 23 2 1
TACR335*010#TA R 3.3 10 85 7 125 0.5 8 5 95 85 38 1 1
TACL475*010#TA L 4.7 10 85 7 125 0.5 10 6 65 58 26 2 1
TACR475*010#TA R 4.7 10 85 7 125 0.5 8 6 87 78 35 1 1
TACL685*010#TA L 6.8 10 85 7 125 0.7 20 7,5 58 52 23 3 1
TACR685*010#TA R 6.8 10 85 7 125 0.7 8 5 95 85 38 1 1
TACH106*010#TA H 10 10 85 7 125 1.0 8 5 89 80 36 2 1
TACL106*010#TA L 10 10 85 7 125 1 20 7.5 58 52 23 3 1
TACR106*010#TA R 10 10 85 7 125 1 8 5 95 85 38 1 1
TACV106*010#TA V 10 10 85 7 125 1.0 10 2 132 119 53 2 1
TACR156*010#TA R 15 10 85 7 125 1.5 10 5 95 85 38 1 1
TACV156*010#TA V 15 10 85 7 125 1.5 10 2 132 119 53 2 1
TACR226*010#TA R 22 10 85 7 125 2.2 14 5 95 85 38 2 1
TACA336*010#TA A 33 10 85 7 125 3.3 12 1 200 180 80 1 1
TACR336*010#TA R 33 10 85 7 125 3.3 20 5 95 85 38 3 1
TACB476*010#TA B 47 10 85 7 125 4.7 15 1 200 180 80 1 1
TACT476*010#TA T 47 10 85 7 125 4.7 12 1 200 180 80 1 1
16 Volt @ 85°C
TACK104*016#TA K 0.1 16 85 10 125 0.5 6 40 19 17 8 1 1
TACK154*016#TA K 0.15 16 85 10 125 0.5 6 30 22 20 9 1 1
TACK224*016#TA K 0.22 16 85 10 125 0.5 6 20 27 25 11 1 1
TACK334*016#TA K 0.33 16 85 10 125 0.5 6 20 27 25 11 1 1
TACL474*016#TA L 0.47 16 85 10 125 0.5 6 7.5 58 52 23 1 1
TACL684*016#TA L 0.68 16 85 10 125 0.5 6 7.5 58 52 23 1 1
TACL105*016#TA L 1 16 85 10 125 0.5 6 7.5 58 52 23 1 1
TACU105*016#TA U 1 16 85 10 125 0.5 8 5 84 75 33 1 1
TACL225*016#TA L 2.2 16 85 10 125 0.5 10 7.5 58 52 23 1 1
TACR106*016#TA R 10 16 85 10 125 1.6 10 5 95 85 38 2 1
20 Volt @ 85°C
TACK224*020#TA K 0.22 20 85 13 125 0.5 6 20 27 25 11 1 1
TACR335*020#TA R 3.3 20 85 13 125 0.7 8 5 95 85 38 1 1
TACR475*020#TA R 4.7 20 85 13 125 0.9 8 5 95 85 38 1 1
25 Volt @ 85°C
TACR105*025#TA R 1 25 85 17 125 0.5 8 5 95 85 38 1 1
Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz,
0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. For typical weight and composition see page 259.
081821

TAC Series
TAC series (Temperature range -55ºC to +125ºC)
TEST
for 1-2 hours before measuring. DF 1.5 x initial limit
Store at 40ºC and 90-95% relative humidity for 1344 DCL initial limit
1 +20 15
5 +125 15
6 +20 15 ESR IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* IL*
Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles of DCL initial limit
Surge
duration 6 min (30 sec charge, 5 min 30 sec discharge) ΔC/C within ±10% of initial value
Voltage
through a charge / discharge resistance of 1000Ω DF initial limit
ESR initial limit
*Initial Limit

TEST
1-2 hours before measuring. DF 1.5 x initial limit
1 +20 15
5 +125 15

Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles of
Surge
Voltage
through a charge / discharge resistance of 1000Ω
*Initial Limit
040220

TAC Series
TEST
1-2 hours before measuring. DF 1.5 x initial limit
Store at 40ºC and 90-95% relative humidity for 1344 DCL 2 x initial limit
1 +20 15
Stability 4 +85 15 DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* 1.5 x IL*
5 +125 15
6 +20 15 ESR IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* 1.5 x IL*
Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles of DCL 2 x initial limit
Surge Voltage duration 6 min (30 sec charge, 5 min 30 sec discharge) ΔC/C within ±30% of initial value
through a charge / discharge resistance of 1000Ω DF 2 x initial limit
ESR 2 x initial limit
*Initial Limit
040220

TAC Series
SERIES LINE UP : Conventional SMD MnO2
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

TLC Series – High CV TACmicrochip®
TLC Series
Tantalum Solid Electrolytic Chip Capacitors Consumer Series
FEATURES
• High Capacitance vs. Voltage Ratio
• Super High Volumetric Efficiency
• CV Range: 0.47-220μF / 2-35V LEAD-FREE COMPATIBLE
COMPONENT
• Consumer Applications (Portable Hand-held Electronics,
Cellular Phones, Digital Equipment etc.)
APPLICATIONS
• Consumer Portable Applications with Space Limitations
L

Minimum
EIA EIA L+0.20 (0.008) W+0.15 (0.006) H+0.15 (0.006) Termination
POLARITY BAND NOT TO Code Termination
EXCEED CENTER LINE Code Metric -0.00 (0.000) -0.00 (0.000) -0.00 (0.000) Spacing (S)
Length (Lt)
3.20 ± 0.20 1.60 ± 0.20
D 1206 3216-06 0.60 (0.024) max 1.80 (0.071) min 0.15 (0.006)
(0.126 ± 0.008) (0.063 ± 0.008)
H 0.60 ± 0.12 0.33 ± 0.02 0.33 ± 0.02
E* 0201 0603-03 0.20 (0.008) min 0.10 (0.004)
(0.024 ± 0.005) (0.013 ± 0.001) (0.013 ± 0.001)
S Lt W H 0805 2012-10 2.00 (0.079) 1.35 (0.053) 1.00 (0.039) max 0.70 (0.028) min 0.15 (0.006)
0.50 +0.20 0.50 -0.00
+0.20
K 0402 1005-07 1.00 (0.039) -0.00

0.40 (0.016) min 0.10 (0.004)
(0.020 +0.008
-0.000 ) (0.020 +0.008
-0.000 )
MARKING L 0603 1608-10 1.60 (0.063) 0.85 (0.033) 0.85 (0.033) 0.55 (0.022) min 0.15 (0.006)
R 0805 2012-15 2.00 (0.079) 1.35 (0.053) 1.35 (0.053) 0.70 (0.028) min 0.15 (0.006)
D, H, K, L, R, T, U, V CASE T 1210 3528-12
3.50 ± 0.20 2.80 +0.20
-0.10
1.20 (0.047) max 2.00 (0.079) min 0.15 (0.006)
(0.138 ± 0.008) (0.110 +0.008
-0.004 )
U 0805 2012-06 2.00 (0.079) 1.35 (0.053) 0.60 (0.024) max 0.70 (0.028) min 0.15 (0.006)
3.20 ± 0.20 1.60 ± 0.20
V 1206 3216-08 0.75 (0.030) max 1.80 (0.071) min 0.15 (0.006)
(0.126 ± 0.008) (0.063 ± 0.008)
Polarity
Band
(Anode+) *Please contact KYOCERA AVX, availability upon request
E CASE
Polarity
Band
(Anode+)
HOW TO ORDER
TLC L 226 M 006 R TA 4000
Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging Standard ESR in mΩ
See table pF code: 1st two digits M = ±20% 002=2Vdc R, P = 7" Standard Tin Suffix
above represent significant figures, 003=3Vdc Termination Plastic Tape OR
3rd digit represents multiplier 004=4Vdc X, Q = 4¼" Standard Tin
(number of zeros to follow) 006=6.3Vdc Termination Plastic Tape
008=8Vdc A, M = 7" Gold Termination
025=25Vdc H = Chip Tray (waffle)
035=35Vdc Only case E
110821

TLC Series
Rated Voltage (VR) -55°C ≤ +40°C: 2 3 4 6.3 8 10 16 20 25 35
Category Voltage (VC) at 85°C: 1 1.5 2 3.2 4 5 8 10 12.5 17.5
Category Voltage (VC) at 125°C: 0.4 0.6 0.8 1.3 1.6 2 3.2 4 5 7

Capacitance Voltage Rating DC (VR) to 40°C
μF Code 2.0V 3.0V 4.0V 6.3V 8V 10V 16V 20V 25V 35V
0.47 474 E* K
1.0 105 E* K L R
2.2 225 K H
3.3 335 L
4.7 475 K K/U
6.8 685 K K U
10 106 K K K U V R
15 156 K K H/L
22 226 U L/U L
H/L
33 336 L/U L H
L(4000)/U/V
47 476 L L/R H/L H/L/R/V D H/R
68 686 R R
100 107 R R/T T
150 157
220 227 T
Engineering samples - please contact KYOCERA AVX
*Please contact KYOCERA AVX, availability upon request
120% rated range

100% 100% 100%
80%
80% 80%
60% 67%
50%
40%
33%
20% 20%
0%
-55°C 0°C 40°C 60°C 85°C 105°C 125°C
110821

TLC Series
Rated Rated Category Category DCL ESR Max. 100kHz R MS Current (mA)
Case Capacitance Voltage Temperature Voltage Temperature Max. @100kHz
Part Number MSL
Size (μF) (V) (°C) (V) (°C) (μA) (Ω) 25°C 85°C 125°C
2 Volt @ 40°C
TLCK156M002#TA K 15 2 40 0.4 125 0.5 15 32 28 13 3
TLCL476M002#TA L 47 2 40 0.4 125 0.9 7.5 58 52 23 3
3 Volt @ 40°C
TLCK685M003#TA K 6.8 3 40 0.6 125 0.5 15 32 28 13 3
TLCK106M003#TA K 10 3 40 0.6 125 0.5 15 32 28 13 3
TLCL476M003#TA L 47 3 40 0.6 125 1.4 7.5 58 52 23 3
TLCR476M003#TA R 47 3 40 0.6 125 3.0 7.5 77 70 31 3
4 Volt @ 40°C
TLCK475M004#TA K 4.7 4 40 0.8 125 0.5 15 32 28 13 3
TLCK685M004#TA K 6.8 4 40 0.8 125 0.5 15 32 28 13 3
TLCK106M004#TA K 10 4 40 0.8 125 0.5 15 32 28 13 3
TLCK156M004#TA K 15 4 40 0.8 125 3.0 15 32 28 13 3
TLCU226M004#TA U 22 4 40 0.8 125 0.9 12 54 49 22 3
TLCL336M004#TA L 33 4 40 0.8 125 1.3 7.5 58 52 23 3
TLCU336M004#TA U 33 4 40 0.8 125 2.6 9 62 56 25 3
TLCH476M004#TA H 47 4 40 0.8 125 1.9 5 89 80 36 3
TLCL476M004#TA L 47 4 40 0.8 125 1.9 7.5 58 52 23 3
TLCR686M004#TA R 68 4 40 0.8 125 2.7 5 95 85 38 3
TLCR107M004#TA R 100 4 40 0.8 125 4.0 5 95 85 38 3
TLCT227M004#TA T 220 4 40 0.8 125 8.8 1 200 180 80 3
6.3 Volt @ 40°C
TLCE474M006HTA* E 0.47 6.3 40 1.3 125 1.0 60 13 12 5 3
TLCE105M006HTA* E 1 6.3 40 1.3 125 1.0 60 13 12 5 3
TLCK475M006#TA K 4.7 6.3 40 1.3 125 0.5 15 32 28 13 3
TLCU475M006#TA U 4.7 6.3 40 1.3 125 0.5 5 84 75 33 3
TLCK106M006#TA K 10 6.3 40 1.3 125 3.1 15 32 28 13 3
TLCL226M006#TA L 22 6.3 40 1.3 125 1.4 7.5 58 52 23 3
TLCU226M006#TA U 22 6.3 40 1.3 125 2.8 12 54 49 22 3
TLCH336M006#TA H 33 6.3 40 1.3 125 2.0 5 89 80 36 3
TLCL336M006#TA L 33 6.3 40 1.3 125 2.1 7.5 58 52 23 3
TLCL336M006#4000 L 33 6.3 40 1.3 125 2.1 4 79 71 32 3
TLCU336M006#TA U 33 6.3 40 1.3 125 10.4 7.5 68 61 27 3
TLCV336M006#TA V 33 6.3 40 1.3 125 4.2 5 84 75 33 3
TLCH476M006#TA H 47 6.3 40 1.3 125 3.0 5 89 80 36 3
TLCL476M006#TA L 47 6.3 40 1.3 125 29.6 10 50 45 20 3
TLCR476M006#TA R 47 6.3 40 1.3 125 6.0 5 95 85 38 3
TLCV476M006#TA V 47 6.3 40 1.3 125 6.0 15 48 43 19 3
TLCR686M006#TA R 68 6.3 40 1.3 125 4.3 5 95 85 38 3
TLCR107M006#TA R 100 6.3 40 1.3 125 6.0 5 95 85 38 3
TLCT107M006#TA T 100 6.3 40 1.3 125 31.5 15 52 46 21 3
8 Volt @ 40°C
TLCL336M008#TA L 33 8 40 1.6 125 26.4 10 50 45 20 3
TLCD476M008#TA D 47 8 40 1.6 125 18.8 7 71 64 28 3
10 Volt @ 40°C
TLCK225M010#TA K 2.2 10 40 2 125 0.5 15 32 28 13 3
TLCU685M010#TA U 6.8 10 40 2 125 0.7 5 84 75 33 3
TLCU106M010#TA U 10 10 40 2 125 1.0 5 84 75 33 3
TLCH156M010#TA H 15 10 40 2 125 1.5 5 58 52 23 3
TLCL156M010#TA L 15 10 40 2 125 1.5 7.5 89 80 36 3
TLCL226M010#TA L 22 10 40 2 125 11 10 50 45 20 3
TLCH336M010#TA H 33 10 40 2 125 3.3 5 89 80 36 3
TLCH476M010#TA H 47 10 40 2 125 23.5 7.5 73 66 29 3
TLCR476M010#TA R 47 10 40 2 125 4.7 5 95 85 38 3
TLCT107M010#TA T 100 10 40 2 125 10 1 200 180 80 3
16 Volt @ 40°C
TLCK474M016#TA K 0.47 16 40 3.2 125 0.5 15 32 28 13 3
TLCK105M016#TA K 1 16 40 3.2 125 0.8 15 32 28 13 3
TLCL335M016#TA L 3.3 16 40 3.2 125 0.5 7.5 58 52 23 3
TLCV106M016#TA V 10 16 40 3.2 125 1.6 2 132 119 53 3
110821

TLC Series
Rated Rated Category Category DCL ESR Max. 100kHz R MS Current (mA)
Case Capacitance
Part Number Voltage Temperature Voltage Temperature Max. @100kHz MSL
Size (μF)
(V) (°C) (V) (°C) (μA) (Ω) 25°C 85°C 125°C
20 Volt @ 40°C
TLCH225M020#TA H 2.2 20 40 4 125 0.5 7.5 89 80 36 3
TLCR106M020#TA R 10 20 40 4 125 0.6 5 95 85 38 3
25 Volt @ 40°C
TLCL105M025#TA L 1.0 25 40 5 125 0.5 7.5 58 85 23 3
35 Volt @ 40°C
TLCR105M035#TA R 1.0 35 40 7 125 0.5 5 95 85 38 3
*Please contact KYOCERA AVX, availability upon request

DCL allowed to move up to 2.00 times the limit post mounting.
QUALIFICATION TABLE
TLC series (Temperature range -55ºC to +125ºC)
TEST
voltage (Uc) at 85ºC for 2000 hours through a DCL 1.25 x initial limit
Endurance
circuit impedance of ≤0.1Ω/V. Stabilize at room ΔC/C within ±30% of initial value
temperature for 1-2 hours before measuring. ESR 1.5 x initial limit
days, with no applied voltage. Stabilize at room DCL 2 x initial limit
Humidity
temperature and humidity for 1-2 hours before ΔC/C ±30% of initial value
Step Temperature°C Duration (min) Voltage Applied
1 +20 15 N/A +20ºC -55ºC +20ºC +40ºC +60ºC +85ºC +125ºC +20ºC
2 -55 15 N/A
3 +20 15 N/A DCL IL* n/a IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* IL*
Temperature 4 +40 15 VR
Stability 5 +60 15 0.66 x VR ΔC/C n/a +0/-25% ±5% +10/-0% +10/-0% +20/-0% +25/-0% +20/-10%
6 +85 15 0.50 x VR
7 +125 15 0.20 x VR ESR IL* n/a 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL*
8 +20 15 N/A
Apply 1.3x rated voltage (Ur) at 40°C for 1000 cycles Visual examination no visible damage
*Initial Limit
081821

TLC Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

TPC Series – Low ESR TACmicrochip®
TPC Series
Low ESR TACmicrochip®
FEATURES
• Low ESR TACmicrochip® Capacitor
• Smallest and Low Profile Tantalum
• CV Range: 1.0-100μF / 3-25V LEAD-FREE COMPATIBLE
COMPONENT
APPLICATIONS
• Portable Controller with Elevated Power Requirements

Minimum
L EIA EIA L+0.20 (0.008) W+0.15 (0.006) H+0.15 (0.006) Termination
Code Termination
Code Metric -0.00 (0.000) -0.00 (0.000) -0.00 (0.000) Spacing (S)
Length (Lt)
H 0805 2012-10 2.00 (0.079) 1.35 (0.053) 1.00 (0.039) max 0.70 (0.028) min 0.15 (0.006)
+0.20
0.50 +0.20
-0.00 0.50 -0.00
POLARITY BAND NOT TO K 0402 1005-07 1.00 (0.039) +0.008 0.40 (0.016) min 0.10 (0.004)
EXCEED CENTER LINE (0.020 +0.008
-0.000 ) (0.020 -0.000 )
L 0603 1608-10 1.60 (0.063) 0.85 (0.033) 0.85 (0.033) 0.55 (0.022) min 0.15 (0.006)
H
R 0805 2012-15 2.00 (0.079) 1.35 (0.053) 1.35 (0.053) 0.70 (0.028) min 0.15 (0.006)
S Lt W
MARKING
H, K, L, R CASE
Polarity
Band
(Anode+)
HOW TO ORDER
TPC R 106 * 010 R 1800
Type Case Size Capacitance Code Tolerance Rated DC Packaging ESR in mΩ

TACmicrochip® See table pF code: 1st two digits K=±10% Voltage R, P = 7" Standard Tin
above represent significant figures, M=±20% 003=3Vdc Termination Plastic Tape
3rd digit represents multiplier 004=4Vdc X, Q = 4¼" Standard Tin
(number of zeros to follow) 006=6.3Vdc Termination Plastic Tape
010=10Vdc A, M = 7" Gold Termination
Rated Voltage (VR) ≤ +85°C: 3 4 6.3 10 16 20 25
Category Voltage (VC) ≤ +125°C: 2 2.7 4 7 10 13 17
Surge Voltage (VS) ≤ +85°C: 3.9 5.2 8 13 20 26 32
Surge Voltage (VS) ≤ +125°C: 2.6 3.2 5 8 12 16 20
Termination Finish: Tin Plating over Nickel (standard),
Gold Plating over Nickel option available upon request
081721

TPC Series
μF Code 3.0V 4.0V 6.3V 10V 16V 20V 25V
1.0 105 L(5000) R(3000)
1.5 155
2.2 225 K(8000)/L(5000) L(5000) L(5000)
3.3 335 L(5000)
4.7 475 K(8000) L(5000) R(2000)
6.8 685
H(2500)
10 106 L(4000) R(1800)
L(4000),R(1800)
15 156 R(1800) R(1500)
22 226 L(5000)/R(1800) R(1500) R(1500)
33 336 R(1800) H(1500)/R(1500) R(1500)
47 476 R(1500) R(1800)
68 686
100 107 R(1000)
Codes shown are examples of ESR values offered on certain CV and case size. Other codes and ESR values available upon request.

ESR
Case Capacitance Max. Product
Size (μF) @ 100kHz Category
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
3 Volt @ 85°C
TPCK475*003#8000 K 4.7 3 85 2 125 0.5 12 8000 0.043 0.039 0.017 3 1
TPCR336*003#1800 R 33 3 85 2 125 1.0 10 1800 0.158 0.142 0.063 2 1
TPCR476*003#1500 R 47 3 85 2 125 1.5 10 1500 0.173 0.156 0.069 3 1
4 Volt @ 85°C
TPCL226*004#5000 L 22 4 85 2.7 125 0.9 6 5000 0.071 0.064 0.028 3 1
TPCR226*004#1800 R 22 4 85 2.7 125 0.9 8 1800 0.158 0.142 0.063 1 1
TPCH336*004#1500 H 33 4 85 2.7 125 1.3 14 1500 0.163 0.147 0.065 3 1
TPCR336*004#1500 R 33 4 85 2.7 125 1.3 10 1500 0.173 0.156 0.069 2 1
TPCR107*004#1000 R 100 4 85 2.7 125 4.0 30 1000 0.212 0.191 0.085 3 1
6.3 Volt @ 85°C
TPCK225*006#8000 K 2.2 6.3 85 4 125 0.5 8 8000 0.043 0.039 0.017 3 1
TPCL225*006#5000 L 2.2 6.3 85 4 125 0.5 6 5000 0.071 0.064 0.028 1 1
TPCL106*006#4000 L 10 6.3 85 4 125 0.6 10 4000 0.079 0.071 0.032 3 1
TPCR156*006#1800 R 15 6.3 85 4 125 0.9 8 1800 0.158 0.142 0.063 1 1
TPCR226*006#1500 R 22 6.3 85 4 125 1.4 10 1500 0.173 0.156 0.069 1 1
TPCR476*006#1800 R 47 6.3 85 4 125 3.0 20 1800 0.158 0.142 0.063 3 1
10 Volt @ 85°C
TPCL105*010#5000 L 1.0 10 85 7 125 0.5 6 5000 0.071 0.064 0.028 1 1
TPCL225*010#5000 L 2.2 10 85 7 125 0.5 6 5000 0.071 0.064 0.028 1 1
TPCL335*010#5000 L 3.3 10 85 7 125 0.5 8 5000 0.071 0.064 0.028 2 1
TPCL475*010#5000 L 4.7 10 85 7 125 0.5 10 5000 0.071 0.064 0.028 2 1
TPCH106*010#2500 H 10 10 85 7 125 1.0 8 2500 0.126 0.113 0.050 2 1
TPCL106*010#4000 L 10 10 85 7 125 1.0 20 4000 0.079 0.071 0.032 3 1
TPCR106*010#1800 R 10 10 85 7 125 1.0 8 1800 0.158 0.142 0.063 1 1
TPCR156*010#1500 R 15 10 85 7 125 1.5 10 1500 0.173 0.156 0.069 1 1
TPCR226*010#1500 R 22 10 85 7 125 2.2 14 1500 0.173 0.156 0.069 2 1
TPCR336*010#1500 R 33 10 85 7 125 3.3 20 1500 0.173 0.156 0.069 3 1
16 Volt @ 85°C
TPCL225*016#5000 L 2.2 16 85 10 125 0.5 10 5000 0.071 0.064 0.028 1 1
TPCR106*016#1800 R 10 16 85 10 125 1.6 10 1800 0.158 0.142 0.063 2 1
20 Volt @ 85°C
TPCR475*020#2000 R 4.7 20 85 13 125 0.9 8 2000 0.150 0.135 0.060 1 1
25 Volt @ 85°C
TPCR105*025#3000 R 1.0 25 85 17 125 0.5 8 3000 0.122 0.110 0.049 1 1

012022

TPC Series
TPC series (Temperature range -55ºC to +125ºC)
TEST
1 +20 15
Stability
5 +125 15
Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles DCL initial limit
Surge of duration 6 min (30 sec charge, 5 min 30 sec
ESR initial limit
*Initial Limit

TEST
Endurance impedance of ≤0.1Ω/V. Stabilize at room temperature
1 +20 15
Stability 4 +85 15
5 +125 15
Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles of DCL 1.5 x initial limit
Surge
Voltage through a charge / discharge resistance of 1000Ω DF 1.5 x initial limit
*Initial Limit
040220

TPC Series
TEST
Store at 40ºC and 90-95% relative humidity for 1344 DCL 2 x initial limit
1 +20 15
2 -55 15
Stability
4 +85 15
DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* 1.5 x IL*
5 +125 15
6 +20 15 ESR IL* 1.25 x IL* IL* 1.25 x IL* 2 x IL* 1.5 x IL*

Apply 1.3x rated voltage (Ur) at 85°C for 1000 cycles of DCL 2 x initial limit
Surge Voltage duration 6 min (30 sec charge, 5 min 30 sec discharge) ΔC/C within ±30% of initial value
through a charge / discharge resistance of 1000Ω DF 2 x initial limit
*Initial Limit
012022

TPC Series
High Rel. TMJ THH

ultra 230°C COTS+

TRJ TRM F91-AJ6 F97

professional
multianode
auto professional
Automotive

TPS TPM
multianode
Standard
TAJ F91 F93

Low Profile Low ESR
TLN TLC F98-AS1 F98

High CV undertab
TLJ microchip
undertab,
undertab
fused
030321

Conformal Coated Tantalum Chip
F95 Series – Standard
F95 Series
Standard Conformal Coated Chip
FEATURES APPLICATIONS
• Compliant to the RoHS3 directive 2015/863/EU • Smartphone
• For High Frequency • Tablet PC
• SMD Conformal • Wireless Module
• Small and High CV • E-book LEAD-FREE
• 100% Surge Current Tested COMPATIBLE
COMPONENT
EIA EIA
Code L W H A B C D* L W
Code Metric
3.20±0.30 1.70±0.30 1.40±0.20 0.80±0.30 1.20±0.30 0.80±0.30 0.20
A 1207 32 17-16 H
(0.126±0.012) (0.067±0.012) (0.055±0.008) (0.031±0.012) (0.047±0.012) (0.031±0.012) (0.008) Resin
3.50±0.20 2.80±0.20 1.80±0.20 0.80±0.30 1.20±0.30 1.10±0.30 0.20
B 1411 3528-20
(0.138±0.008) (0.110±0.008) (0.071±0.008) (0.031±0.012) (0.047±0.012) (0.043±0.012) (0.008)
2.20±0.30 1.25±0.30 1.00±0.20 0.60±0.30 0.80±0.30 0.80±0.30 0.20
P 0905 2212-12
(0.087±0.012) (0.049±0.012) (0.039±0.008) (0.024±0.012) (0.031±0.012) (0.031±0.012) (0.008) Solder electrode Solder electrode
3.20±0.20 1.60±0.20 0.80±0.20 0.80±0.20 1.20±0.20 0.80±0.20 0.20

Q 1306 3216-10 A B C
(D)
(0.126±0.008) (0.063±0.008) (0.031±0.008) (0.031±0.008) (0.047±0.008) (0.031±0.008) (0.008)
2.20±0.30 1.25±0.30 0.65 max. 0.60±0.30 0.80±0.30 0.50 min. 0.20 Single-side electrodes (Both electrodes at bottom side only)
R 0905 2212-065
(0.087±0.012) (0.049±0.012) (0.026 max.) (0.024±0.012) (0.031±0.012) (0.020 min.) (0.008)
3.20±0.30 1.60±0.30 1.00±0.20 0.80±0.30 1.20±0.30 0.80±0.30 0.20
S 1306 3216-12
(0.126±0.012) (0.063±0.012) (0.039±0.008) (0.031±0.012) (0.047±0.012) (0.031±0.012) (0.008)
3.50±0.20 2.70±0.20 1.00±0.20 0.80±0.20 1.20±0.20 1.10±0.20 0.20
T 1411 3527-12
(0.138±0.008) (0.106±0.008) (0.039±0.008) (0.031±0.008) (0.047±0.008) (0.043±0.012) (0.008)
*D dimension only for reference
HOW TO ORDER
F95 0G 337 M A   AQ2 or Q2
Type Rated Capacitance Code Tolerance Case Packaging Specification Suffix Single Face
Voltage pF code: 1st two digits K=±10% Size See Tape & Reel LZT = Rated temperature Electrode
represent significant figures, M=±20% See Packaging Section 60ºC only
3rd digit represents multiplier table
(number of zeros to follow) above
Leakage Current: Refer to next page
Provided that:
After 1 minute’s application of rated voltage, leakage current at 85°C 10
times or less than 20ºC specified value.
Capacitance Change By +15% Max. at +125°C
Temperature +10% Max. at +85°C
-10% Max. at -55°C
102220

F95 Series
μF Code 4V (0G) 6.3V (0J) 10V (1A) 16V (1C) 20V (1D) 25V (1E) 35V (1V) 50V (1H)
1.0 105 R P/S P(M)*
1.5 155
2.2 225 P P/R A
3.3 335
4.7 475 P/R A/S A/P/Q/S B
6.8 685
10 106 P/R(M) A/P/Q/S A/B/S A/B
15 156 P A/S
22 226 R(M) A/P(M)/Q/S A/B/Q/S/T B
33 336 P(M) A/P(M)/Q/S B/T B
47 476 P(M) A/B/P(M)/S/T B
68 686 P(M) B
100 107 A/P/S A/B/P(M)/Q/S/T A/B/T
150 157 B/P(M) B
220 227 A/B/Q/S/T B
330 337 A/B/T B
470 477 B B
680 687
Released ratings (M tolerance only) Please contact to your local KYOCERA AVX sales office when these series are being designed
*Rated temperature 60°C only. Please contact KYOCERA AVX when you need detail spec. in your application.

Rated DF @ ESR @ 100kHz RMS Current (mA) *1
(V) (%) (Ω) (%)
4 Volt
F950G107#AAAQ2 A 100 4 4.0 12 0.5 387 – 349 155 * 3
F950G107#PAAQ2 P 100 4 4.0 30 1.2 158 – 142 63 ±15 3
F950G107#SAAQ2 S 100 4 4.0 14 0.8 274 – 246 110 * 3
F950G157#BAAQ2 B 150 4 6.0 14 0.4 461 – 415 184 * 3
F950G157MPAAQ2 P 150 4 12.0 31 1.1 165 – 149 66 ±20 3
F950G227#AAAQ2 A 220 4 8.8 25 0.8 306 – 276 122 ±15 3
F950G227#BAAQ2 B 220 4 8.8 16 0.4 461 – 415 184 * 3
F950G227#QAAQ2 Q 220 4 8.8 30 1.5 173 – 156 69 ±20 3
F950G227#SAAQ2 S 220 4 8.8 30 0.8 274 – 246 110 ±15 3
F950G227#TAAQ2 T 220 4 8.8 25 0.6 365 – 329 146 * 3
F950G337#AAAQ2 A 330 4 13.2 40 0.8 306 – 276 122 ±20 3
F950G337#BAAQ2 B 330 4 13.2 30 0.6 376 – 339 151 ±15 3
F950G337#TAAQ2 T 330 4 13.2 40 0.8 316 – 285 126 ±20 3
F950G477#BAAQ2 B 470 4 18.8 40 0.4 461 – 415 184 ±20 3
6.3 Volt
F950J336MPAAQ2 P 33 6.3 2.1 14 1.1 165 – 149 66 * 3
F950J226MRAAQ2 R 22 6.3 1.4 20 2.0 112 – 101 45 ±20 3
F950J476MPAAQ2 P 47 6.3 3.0 20 1.1 165 – 149 66 ±15 3
F950J686MPAAQ2 P 68 6.3 4.3 25 1.2 158 – 142 63 ±15 3
F950J107#AAAQ2 A 100 6.3 6.3 14 0.5 387 – 349 155 * 3
F950J107#BAAQ2 B 100 6.3 6.3 14 0.4 461 – 415 184 * 3
F950J107MPAAQ2 P 100 6.3 12.6 35 1.2 158 – 142 63 ±20 3
F950J107#QAAQ2 Q 100 6.3 6.3 30 1.1 202 – 182 81 ±20 3
F950J107#SAAQ2 S 100 6.3 6.3 20 0.9 258 – 232 103 ±15 3
F950J107#TAAQ2 T 100 6.3 6.3 14 0.6 365 – 329 146 * 3
F950J157#BAAQ2 B 150 6.3 9.5 18 0.4 461 – 415 184 * 3
F950J227#BAAQ2 B 220 6.3 13.9 30 0.4 461 – 415 184 * 3
F950J337#BAAQ2 B 330 6.3 20.8 35 0.6 376 – 339 151 ±20 3
F950J477#BAAQ2 B 470 6.3 59.2 40 0.5 412 – 371 165 ±20 3
10 Volt
F951A106#PAAQ2 P 10 10 1.0 8 3.0 100 – 90 40 * 3
F951A106MRAAQ2 R 10 10 1.0 18 3.0 91 – 82 37 ±20 3
F951A156#PAAQ2 P 15 10 1.5 10 3.0 100 – 90 40 * 3
F951A226#AAAQ2 A 22 10 2.2 6 0.9 289 – 260 115 * 3
F951A226MPAAQ2 P 22 10 2.2 14 3.0 100 – 90 40 * 3
F951A226#QAAQ2 Q 22 10 2.2 10 2.0 150 – 135 60 * 3
F951A226#SAAQ2 S 22 10 2.2 10 1.1 234 – 210 93 * 3
F951A336#AAAQ2 A 33 10 3.3 10 0.8 306 – 276 122 * 3
F951A336MPAAQ2 P 33 10 3.3 20 3.0 100 – 90 40 ±15 3
F951A336#QAAQ2 Q 33 10 3.3 18 3.0 122 – 110 49 ±15 3
F951A336#SAAQ2 S 33 10 3.3 10 1.1 234 – 210 93 * 3
F951A476#AAAQ2 A 47 10 4.7 10 0.8 306 – 276 122 * 3
040820

F95 Series
Rated DF @ ESR @ 100kHz RMS Current (mA) *1
(V) (%) (Ω) (%)
F951A476#BAAQ2 B 47 10 4.7 8 0.4 461 – 415 184 * 3
F951A476MPAAQ2 P 47 10 4.7 30 3.0 100 – 90 40 ±20 3
F951A476#SAAQ2 S 47 10 4.7 14 1.1 234 – 210 93 ±15 3
F951A476#TAAQ2 T 47 10 4.7 12 0.8 316 – 285 126 * 3
F951A686#BAAQ2 B 68 10 6.8 12 0.4 461 – 415 184 * 3
F951A107#AAAQ2 A 100 10 10.0 35 1.0 274 – 246 110 ±15 3
F951A107#BAAQ2 B 100 10 10.0 14 0.4 461 – 415 184 * 3
F951A107#TAAQ2 T 100 10 10.0 20 0.6 365 – 329 146 ±15 3
16 Volt
F951C475#PAAQ2 P 4.7 16 0.8 10 4.0 87 – 78 35 * 3
F951C475#RAAQ2 R 4.7 16 0.8 12 6.0 65 – 58 26 ±20 3
F951C106#AAAQ2 A 10 16 1.6 6 1.4 231 – 208 93 * 3
F951C106#PAAQ2 P 10 16 1.6 10 4.0 87 – 78 35 * 3
F951C106#QAAQ2 Q 10 16 1.6 8 3.0 122 – 110 49 * 3
F951C106#SAAQ2 S 10 16 1.6 8 2.0 173 – 156 69 * 3
F951C156#AAAQ2 A 15 16 2.4 8 1.4 231 – 208 93 * 3
F951C156#SAAQ2 S 15 16 2.4 8 2.0 173 – 156 69 * 3
F951C226#AAAQ2 A 22 16 3.5 8 1.4 231 – 208 93 * 3
F951C226#BAAQ2 B 22 16 3.5 6 0.5 412 – 371 165 * 3
F951C226#QAAQ2 Q 22 16 3.5 12 3.0 122 – 110 49 * 3
F951C226#SAAQ2 S 22 16 3.5 10 2.0 173 – 156 69 ±15 3
F951C226#TAAQ2 T 22 16 3.5 8 1.4 239 – 215 96 * 3
F951C336#BAAQ2 B 33 16 5.3 8 0.5 412 – 371 165 * 3
F951C336#TAAQ2 T 33 16 5.3 11 1.5 231 – 208 92 ±10 3
F951C476#BAAQ2 B 47 16 7.5 10 0.6 376 – 339 151 * 3
20 Volt
F951D225#PAAQ2 P 2.2 20 0.5 6 6.0 71 – 64 28 * 3
F951D475#AAAQ2 A 4.7 20 0.9 6 1.5 224 – 201 89 * 3
F951D475#SAAQ2 S 4.7 20 0.9 8 4.0 122 – 110 49 * 3
F951D106#AAAQ2 A 10 20 2.0 8 1.5 224 – 201 89 * 3
F951D106#BAAQ2 B 10 20 2.0 6 0.8 326 – 293 130 * 3
F951D106#SAAQ2 S 10 20 2.0 10 4.0 122 – 110 49 ±10 3
F951D226#BAAQ2 B 22 20 4.4 8 0.8 326 – 293 130 * 3
F951D336#BAAQ2 B 33 20 6.6 15 1.0 292 – 262 117 * 3
25 Volt
F951E105#RAAQ2 R 1 25 0.5 10 10.0 50 – 45 20 ±10 3
F951E225#PAAQ2 P 2.2 25 0.6 8 6.0 71 – 64 28 ±15 3
F951E225#RAAQ2 R 2.2 25 0.6 15 15.0 41 – 37 16 ±20 3
F951E475#AAAQ2 A 4.7 25 1.2 8 2.0 194 – 174 77 * 3
F951E475#PAAQ2 P 4.7 25 1.2 10 8.0 61 – 55 24 ±15 3
F951E475#QAAQ2 Q 4.7 25 1.2 10 4.0 106 – 95 42 ±15 3
F951E475#SAAQ2 S 4.7 25 1.2 8 4.0 122 – 110 49 * 3
F951E106#AAAQ2 A 10 25 2.5 12 2.0 194 – 174 77 ±15 3
F951E106#BAAQ2 B 10 25 2.5 6 0.9 307 – 227 123 * 3
35 Volt
F951V105#PAAQ2 P 1 35 0.5 8 10.0 55 – 49 22 ±10 3
F951V105#SAAQ2 S 1 35 0.5 6 8.0 87 – 78 35 * 3
F951V225#AAAQ2 A 2.2 35 0.8 6 4.4 131 – 118 52 * 3
F951V475#BAAQ2 B 4.7 35 1.7 6 1.6 230 – 207 92 * 3
50 Volt
F951H105MPALZTQ2 P 1 50 1.0 8 7.0 65 59 – 26 ±20 3

#: "M" for ±20% tolerance, "K" for ± 10% tolerance. When you need K tolerance for the part numbers which have M tolerance only, please contact to your local KYOCERA AVX sales office.
Item All Case (%)

Damp Heat ±10
Surge ±5
Endurance ±10
040820

F95 Series
QUALIFICATION TABLE

TEST
Condition
Capacitance Change ................... Refer to the table above(*1)
After 2000 hours’ application of rated voltage at 85°C,
Terminal Strength jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no
SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP :

CONVENTIONAL SMD MnO2
122920

F95 Audio Series – Optimized for Audio Applications
F95 Audio Series
Conformal Coated Chip Optimized for Audio Applications
FEATURES
• Rich Sound in the Bass Register and Clear Sound
• Materials are Strictly Selected to Achieve High Level Sound
• F95 Series has No Lead-Frame and No Vibration Factor LEAD-FREE COMPATIBLE
• Low ESR, Low ESL COMPONENT

• Line Up Miniature Size and High Capacitance, Necessary to Mobile Design
• SMD Conformal
• Small and High CV
L W
APPLICATIONS
H
• Mobile Audio Player
Resin
• Smartphone
• Mobile Phone
Solder electrode Solder electrode
• Wireless Microphone System
(D)
A B C
Single-side electrodes CASE DIMENSIONS: millimeters (inches)

(Both electrodes at bottom side only)
EIA EIA
Code L W H A B C D*
Code Metric
3.50±0.20 2.80±0.20 1.80±0.20 0.80±0.30 1.20±0.30 1.10±0.30 0.20
MARKING B 1411 3528-20
(0.138±0.008) (0.110±0.008) (0.071±0.008) (0.031±0.012) (0.047±0.012) (0.043±0.012) (0.008)
3.20±0.30 1.60±0.30 1.00±0.20 0.80±0.30 1.20±0.30 0.80±0.30 0.20
S CASE B, T CASE S 1306 3216-12
(0.126±0.012) (0.063±0.012) (0.039±0.008) (0.031±0.012) (0.047±0.012) (0.031±0.012) (0.008)
3.50±0.20 2.70±0.20 1.00±0.20 0.80±0.20 1.20±0.20 1.10±0.20 0.20
T 1411 3527-12
(0.138±0.008) (0.106±0.008) (0.039±0.008) (0.031±0.008) (0.047±0.008) (0.043±0.012) (0.008)
J8 J8 *D dimension only for reference
Capacitance Capacitance
Code Code
μF 68 100 150 220 330 470 680

code W7 A8 E8 J8 N8 S8 W8
HOW TO ORDER
F95 0G 227 M S  AM1 Q2
Type Rated Capacitance Code Tolerance Case Packaging AUDIO Single

Voltage pF code: 1st two digits K=±10% Size See Tape & Reel Series Face
represent significant M=±20% See Packaging Section Code Electrode
figures, 3rd digit represents table
multiplier (number of zeros above
to follow)
Leakage Current: Refer to next page
Provided that:
+10% Max. at +85°C
-10% Max. at -55°C
102220

F95 Audio Series
μF Code 4V (0G) 6.3V (0J) 10V (1A)
68 686 S S B
100 107 S S/T B
150 157 S
220 227 S/T B
330 337 T B
470 477 B
680 687
Released ratings
Please contact to your local KYOCERA AVX sales office when
these series are being designed in your application.

Size (μF) (μA)
(V) (%) (Ω) 25ºC 85ºC 125ºC (%)
4 Volt
F950G686#SAAM1Q2 S 68 4 2.7 10 0.8 274 246 110 * 3
F950G107#SAAM1Q2 S 100 4 4.0 14 0.8 274 246 110 * 3
F950G157#SAAM1Q2 S 150 4 6.0 22 0.8 274 246 110 ±15 3
F950G227#SAAM1Q2 S 220 4 8.8 30 0.8 274 246 110 ±15 3
F950G227#TAAM1Q2 T 220 4 8.8 25 0.6 365 329 146 * 3
F950G337#TAAM1Q2 T 330 4 13.2 40 0.8 316 285 126 ±20 3
F950G477#BAAM1Q2 B 470 4 18.8 40 0.4 461 415 184 ±20 3
6.3 Volt
F950J686#SAAM1Q2 S 68 6.3 4.3 14 0.9 258 232 103 * 3
F950J107#SAAM1Q2 S 100 6.3 6.3 20 0.9 258 232 103 ±15 3
F950J107#TAAM1Q2 T 100 6.3 6.3 14 0.6 365 329 146 * 3
F950J227#BAAM1Q2 B 220 6.3 13.9 30 0.4 461 415 184 * 3
F950J337#BAAM1Q2 B 330 6.3 20.8 35 0.6 376 339 151 ±20 3
10 Volt
F951A686#BAAM1Q2 B 68 10 6.8 12 0.4 461 415 184 * 3
F951A107#BAAM1Q2 B 100 10 10.0 14 0.4 461 415 184 * 3
Item All Case (%)
Damp Heat ±10
Surge ±5
Endurance ±10
040720

F95 Audio Series
QUALIFICATION TABLE
Audio F95 series (Temperature range -55ºC to +125ºC)
TEST
Condition
After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test
cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above.
After 2000 hours’ application of rated voltage 85°C,
Endurance Capacitance Change .................... Refer to the table above (*1)
Dissipation Factor ......................... Initial specified value or less
Leakage Current ............................ Initial specified value or less
both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with
Terminal Strength a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be

CONVENTIONAL SMD MnO2
122920

F72/F75 Series – Low Profile and High CV
F72/F75 Series
Low Profile and High CV Conformal Coated Chip
FEATURES
• SMD Conformal
COMPONENT
APPLICATIONS
• Smartphone
• Mobile Phone CASE DIMENSIONS: millimeters (inches)
• Wireless Module EIA EIA
Code L W H A B D*
• Hearing Aid Code Metric
F72 Case Dimensions
7.30±0.30 4.30±0.30 2.00 Max. 1.30±0.40 3.90±0.60 6.40
D 2914 7343-20
(0.287±0.012) (0.169±0.012) (0.079 Max) (0.051±0.016) (0.153±0.024) (0.252)
F72/F75 7.20±0.30 6.00±0.30 2.00 Max. 1.30±0.40 3.80±0.60 6.20
M 2824 7260-20
(0.283±0.012) (0.236±0.012) (0.079 Max) (0.051±0.016) (0.150±0.024) (0.244)
Double Face Electrode Single Face Electrode
7.20±0.30 6.00±0.30 1.20±0.30 1.30±0.40 3.80±0.60 6.20
R 2824 7260-15
(0.283±0.012) (0.236±0.012) (0.047±0.012) (0.051±0.016) (0.150±0.024) (0.244)
F75 Case Dimensions
7.10±0.30 3.20±0.30 2.50±0.30 1.30±0.30 3.60±0.60 6.00
C 2813 7132-28
(0.280±0.012) (0.126±0.012) (0.098±0.012) (0.051±0.012) (0.142±0.024) (0.236)
7.30±0.30 4.30±0.30 2.80±0.30 1.30±0.40 3.90±0.60 6.40

D 2914 7343-31
(0.287±0.012) (0.169±0.012) (0.110±0.012) (0.051±0.016) (0.153±0.024) (0.252)
7.20±0.30 6.00±0.30 2.80 Max. 1.30±0.40 3.80±0.60 6.20

M 2824 7260-28
(0.283±0.012) (0.236±0.012) (0.110 Max) (0.051±0.016) (0.150±0.024) (0.244)
7.20±0.30 6.00±0.30 3.50±0.30 1.30±0.40 3.80±0.60 6.20

R 2824 7260-38
(0.283±0.012) (0.236±0.012) (0.138±0.012) (0.051±0.016) (0.150±0.024) (0.244)
Solder Electrode
7.10±0.30 3.20±0.30 2.00 Max. 1.30±0.30 3.60±0.60 6.00
U 2813 7132-20
(0.280±0.012) (0.126±0.012) (0.079 Max) (0.051±0.012) (0.142±0.024) (0.236)
Under development
HOW TO ORDER *D dimension only for reference
F72 1A 107 M R   AQ2 or Q2
Type Rated Capacitance Code Tolerance Case Packaging Specification Single Face
Voltage pF code: 1st two digits K=±10% Size See Tape & Reel Suffix Electrode
represent significant figures, M=±20% See Packaging Section AH1 = Low ESR
F75 1C 157 M D  AQ2
Type Rated Capacitance Code Tolerance Case Packaging Single

Voltage pF code: 1st two digits K=±10% Size See Tape & Reel Face
represent significant figures, M=±20% See Packaging Section Electrode
Leakage Current: After 1 minute’s application of rated voltage, leakage current at 20°C
is not more than 0.01CV or 0.5μA, whichever is greater.
is not more than 0.1CV or 5μA, whichever is greater.
After 1 minute’s application of derated voltage, leakage current at
125°C is not more than 0.125CV or 6.3μA, whichever is greater.
+10% Max. at +85°C
-10% Max. at -55°C
102220

F72/F75 Series
F72 F75
Capacitance Rated Voltage Capacitance Rated Voltage
μF Code 4V (0G) 6.3V (0J) 10V (1A) 16V (1C) μF Code 4V (0G) 6.3V (0J) 10V (1A) 16V (1C)
33 336 R 68 686 C
47 476 R R 100 107 C
68 686 R R R 150 157 C D
100 107 R R R D* 220 227 C C/D R
150 157 R R R 330 337 C C/D D
220 227 R R R M 470 477 C/D D/U R/U
330 337 R R M 680 687 D D/R
470 477 M 1000 108 D/R R/U
680 687 M 1500 158 R
1000 108 M/M(AH1) M 2200 228 R M
1500 158 M
Released ratings
*Codes under development - subject to change.

F72
(V) (%) (Ω) (%)
4 Volt
F720G107#RC R 100 4 4.0 8 0.70 463 417 185 * 3
F720G157#RC R 150 4 6.0 10 0.70 463 417 185 * 3
F720G227#RC R 220 4 8.8 12 0.70 463 417 185 * 3
F720G337#RC R 330 4 13.2 12 0.70 463 417 185 * 3
6.3 Volt
F720J686#RC R 68 6.3 4.3 6 0.75 447 402 179 * 3
F720J107#RC R 100 6.3 6.3 8 0.70 463 417 185 * 3
F720J157#RC R 150 6.3 9.5 10 0.70 463 417 185 * 3
F720J227#RC R 220 6.3 13.9 12 0.70 463 417 185 * 3
F720J337#RC R 330 6.3 20.8 12 0.70 463 417 185 * 3
F720J108#MCAQ2 M 1000 6.3 63.0 30 0.14 1118 1006 447 ±15 3
F720J108#MCAH1Q2 M 1000 6.3 63.0 30 0.075 1528 1375 611 ±15 3
F720J158#MCAQ2 M 1500 6.3 95.0 45 0.14 1118 1006 447 ±20 3
10 Volt
F721A476#RC R 47 10 4.7 6 0.80 433 390 173 * 3
F721A686#RC R 68 10 6.8 6 0.75 447 402 179 * 3
F721A107#RC R 100 10 10.0 8 0.70 463 417 185 * 3
F721A157#RC R 150 10 15.0 10 0.70 463 417 185 * 3
F721A227#RC R 220 10 22.0 12 0.70 463 417 185 * 3
F721A477#MCAQ2 M 470 10 47.0 30 0.14 1118 1006 447 ±15 3
F721A687#MCAQ2 M 680 10 68.0 35 0.14 1118 1006 447 ±20 3
F721A108#MCAQ2 M 1000 10 200 45 0.14 1118 1006 447 ±20 3
16 Volt
F721C336#RC R 33 16 5.3 6 0.90 408 367 163 * 3
F721C476#RC R 47 16 7.5 6 0.80 433 390 173 * 3
F721C686#RC R 68 16 10.9 6 0.75 447 402 179 * 3
F721C107#DCAQ2 D 100 16 16.0 10 0.20 866 779 346 * 3
F721C227#MCAQ2 M 220 16 35.2 12 0.20 935 842 374 ±20 3
F721C337#MCAQ2 M 330 16 52.8 45 0.20 935 842 374 ±20 3
F75
Size (μF) (μA)
(V) (%) (Ω) 25ºC 85ºC 125ºC (%)
4 Volt
F750G337#CC C 330 4 13.2 10 0.15 856 771 343 * 3
F750G477#CC C 470 4 18.8 14 0.12 957 862 383 * 3
F750G477#DC D 470 4 18.8 14 0.12 1118 1006 447 * 3
F750G687#DC D 680 4 27.2 18 0.12 1118 1006 447 * 3
F750G108#DC D 1000 4 40.0 24 0.12 1118 1006 447 * 3
F750G108#RC R 1000 4 40.0 24 0.12 1443 1299 577 * 3
F750G158#RC R 1500 4 60.0 30 0.12 1443 1299 577 * 3
F750G228#RC R 2200 4 88.0 45 0.07 1890 1701 756 * 3
6.3 Volt
F750J227#CC C 220 6.3 13.9 10 0.20 742 667 297 * 3
F750J337#CC C 330 6.3 20.8 10 0.15 856 771 343 * 3
F750J337#DC D 330 6.3 20.8 10 0.15 1000 900 400 * 3
F750J477#DC D 470 6.3 29.6 14 0.12 1118 1006 447 * 3
042920

F72/F75 Series
(V) (%) (Ω) (%)
F750J477#UC U 470 6.3 29.6 15 0.10 1049 944 420 * 3
F750J687#DC D 680 6.3 42.8 18 0.12 1118 1006 447 * 3
F750J687#RC R 680 6.3 42.8 18 0.12 1443 1299 577 * 3
F750J108#RC R 1000 6.3 63.0 24 0.12 1443 1299 577 * 3
F750J108#UCAQ2 U 1000 6.3 126 40 0.15 856 771 343 ±20 3
F750J228#MCAQ2 M 2200 6.3 139 60 0.08 1581 1423 632 ±20 3
10 Volt
F751A157#CC C 150 10 15.0 10 0.22 707 636 283 * 3
F751A227#CC C 220 10 22.0 10 0.20 742 667 297 * 3
F751A227#DC D 220 10 22.0 10 0.20 866 779 346 * 3
F751A337#DC D 330 10 33.0 10 0.15 1000 900 400 * 3
F751A477#RC R 470 10 47.0 14 0.12 1443 1299 577 * 3
F751A477#UCAQ2 U 470 10 94.0 30 0.15 856 771 343 ±20 3
16 Volt
F751C686#CC C 68 16 10.9 10 0.22 707 636 283 * 3
F751C107#CC C 100 16 16.0 10 0.22 707 636 283 * 3
F751C157#DC D 150 16 24.0 10 0.22 826 743 330 * 3
F751C227#RC R 220 16 35.2 10 0.20 1118 1006 447 * 3
Item F72/F75 All Case (%)
Damp Heat ±10
Surge ±5
Endurance ±10
QUALIFICATION TABLE
F72/75 series (Temperature range -55ºC to +125ºC)
TEST
Condition
After 2000 hours’ application of rated voltage at 85°C,
Endurance Capacitance Change .................... Refer to the table above (*1)
Dissipation Factor ......................... Initial specified value or less
Leakage Current ............................ Initial specified value or less
Shear Test has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor
its sign at the terminal electrode.
Terminal Strength jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall
be found no remarkable abnormality on the capacitor terminals.
042920

F72/F75 Series
CONFORMAL Ta MnO2
122920

Resin Molded OxiCap® Solid Niobium Oxide® Chip, J-Lead
NOJ Series – Standard and Low Profile OxiCap
OxiCap® NOJ Series
Standard and Low Profile Niobium Oxide Capacitors
FEATURES
• Non-Burn Safe Technology
• Reliability Level: 0.5%/1000 Hours at 85ºC LEAD-FREE COMPATIBLE
• Environmentally Friendly, RoHS Compliant
• CV Range: 2.2-1000μF / 1.8-10V
• Elektra Component of the Year Award, 2005
APPLICATIONS NON-BURN
Elektra Award
2005
• Automotive, Avionics, Digital, FPGA, Industrial Low Voltage NON-SMOKE
L W Control Circuits
• Downsized Industrial and Automotive DC/DC Converters

A S A W1 EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1 ±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) –0.10 (0.004) –0.10 (0.004) (0.008) –0.20 (0.008)
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
MARKING C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
A, B, C, D, E, F, S, T, V, W, X, Y CASE D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
® Capacitance Value in pF
V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
OxiCap LOGO
227 = 220µF W1 dimension applies to the termination width for A dimensional area only.
Polarity
Band
(Anode+)
227 G Rated Voltage
G = 4V LOW PROFILE CASE DIMENSIONS: millimeters (inches)
XXXXX ID Code
EIA EIA L±0.20 W+0.20 (0.008) W1 ±0.20 A+0.30 (0.012)
Code H Max S Min.
Code Metric (0.008) –0.10 (0.004) (0.008) –0.20 (0.008)
P CASE F 2312 6032-20 6.00 (0.236) 3.20 (0.126) 2.00 (0.079) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
1.00±0.10
P 0805 2012-15 2.05 (0.081) 1.35 (0.053) 1.50 (0.059) 0.80 (0.031) 1.40 (0.055)
Capacitance Value in pF (0.039±0.004)
475 = 4.7µF
S 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
475
W 2312 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
Polarity J = 6.3V
Band Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
(Anode+) OxiCap® LOGO W1 dimension applies to the termination width for A dimensional area only.
Pad Stand-off is 0.1±0.1.
HOW TO ORDER
NOJ D 107 M 006 R WJ —
Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging Specification Additional characters
See table 1st two digits represent M = ±20% 001 = 1.8Vdc R = Pure Tin 7" Reel Suffix may be added for
above significant figures, 002 = 2.5Vdc S = Pure Tin 13" Reel special requirements
3rd digit represents 004 = 4Vdc WJ = Standard V = dry pack option
multiplier in pF 006 = 6.3Vdc WB = Low ESR (selected ratings only -
010 = 10Vdc dry pack is standard for
all D, E, V, X, Y case size
ratings)
Technical Data: All technical data relate to an ambient temperature of +25°C is not stated
Rated Voltage (VR) ≤ +85°C: 1.8 2.5 4 6.3 10
Category Voltage (VC) ≤ +105°C: 1.2 1.7 2.7 4 7
Surge Voltage (VS) ≤ +85°C: 2.3 3.3 5.2 8 13
Surge Voltage (VS) ≤ +105°C: 1.6 2.2 3.4 5 8
Reliability: 0.5% per 1000 hours at 85°C, VR, 0.1Ω/V series impedance, 60% confidence level
102220

OxiCap® NOJ Series
STANDARD NIOBIUM OXIDE CAPACITANCE AND RATED VOLTAGE RANGE

μF Code 1.8V (x) 2.5V (e) 4V (G) 6.3V (J) 10V (A)
4.7 475 A A
6.8 685 A A
10 106 A A/B
15 156 A A/B A/B
22 226 A A/B A/B B/C/B(700)
33 336 A/B A/B B/C/B(700) C
47 476 A A/B A/B/C B/C C
68 686 B B/C B/C B/C C
100 107 B/C B/C B/C/B(250) B/C/D/B(400) D/D(150)
150 157 C C C/D C/D
220 227 C C C/D C/D/E
330 337 C C/D D D/E
470 477 D/E D/E E/V/E(75)
680 687 E E/V
1000 108 V V
LOW PROFILE NIOBIUM OXIDE CAPACITANCE AND RATED VOLTAGE RANGE


μF Code 1.8V (x) 2.5V (e) 4V (G) 6.3V (J) 10V (A)
1.0 105
1.5 155
2.2 225 P
3.3 335 P
4.7 475 P/S T
6.8 685 P/S P/S/T T
10 106 P/S P/S/T P/T T
15 156 P/S P/S/T P/T
22 226 P/S/T P/T T T
33 336 T T T W
47 476 T T W W
68 686 W W X/Y
100 107 W W W/X F/Y
150 157 X Y F/Y
220 227 X Y F/Y Y
330 337 Y Y Y
470 477 Y

higher voltage ratings in the same case size, to the same reliability standards
040320

OxiCap® NOJ Series
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 105ºC
(Ω)
1.8 Volt @ 85°C
NOJP156M001#WJ P 15 1.8 85 1.2 105 1.0 10 4.1 0.133 0.119 0.053 1
NOJS156M001#WJ S 15 1.8 85 1.2 105 1.0 6 2 0.197 0.178 0.079 1
NOJP226M001#WJ P 22 1.8 85 1.2 105 1.0 10 3.8 0.138 0.124 0.055 1
NOJS226M001#WJ S 22 1.8 85 1.2 105 1.0 8 1.9 0.203 0.182 0.081 1
NOJT226M001#WJ T 22 1.8 85 1.2 105 1.0 6 1.8 0.231 0.208 0.092 1
NOJT336M001#WJ T 33 1.8 85 1.2 105 1.2 6 1.7 0.238 0.214 0.095 1
NOJA476M001#WJ A 47 1.8 85 1.2 105 1.7 8 1.6 0.237 0.213 0.095 1
NOJB476M001#WJ B 47 1.8 85 1.2 105 1.7 6 1.6 0.252 0.227 0.101 1
NOJT476M001#WJ T 47 1.8 85 1.2 105 1.7 10 1.6 0.245 0.220 0.098 1
NOJB686M001#WJ B 68 1.8 85 1.2 105 2.5 6 1.5 0.261 0.235 0.104 1
NOJB107M001#WJ B 100 1.8 85 1.2 105 3.6 6 1.4 0.270 0.243 0.108 1
NOJC107M001#WJ C 100 1.8 85 1.2 105 3.6 6 0.4 0.574 0.517 0.230 1
NOJW107M001#WJ W 100 1.8 85 1.2 105 3.6 6 0.4 0.520 0.468 0.208 1
NOJC157M001#WJ C 150 1.8 85 1.2 105 5.4 8 0.4 0.574 0.517 0.230 1
NOJC227M001#WJ C 220 1.8 85 1.2 105 8.0 8 0.4 0.574 0.517 0.230 1
NOJX227M001#WJ X 220 1.8 85 1.2 105 8.0 8 0.4 0.548 0.493 0.219 3
NOJC337M001#WJ C 330 1.8 85 1.2 105 11.9 8 0.3 0.663 0.597 0.265 1
NOJY337M001#WJ Y 330 1.8 85 1.2 105 11.9 8 0.3 0.707 0.636 0.283 3
NOJY477M001#WJ Y 470 1.8 85 1.2 105 17.0 8 0.3 0.707 0.636 0.283 3
2.5 Volt @ 85°C
NOJP106M002#WJ P 10 2.5 85 1.7 105 1.0 6 4.5 0.126 0.114 0.051 1
NOJS106M002#WJ S 10 2.5 85 1.7 105 1.0 6 2.2 0.188 0.169 0.075 1
NOJP156M002#WJ P 15 2.5 85 1.7 105 1.0 6 4 0.134 0.121 0.054 1
NOJS156M002#WJ S 15 2.5 85 1.7 105 1.0 8 2 0.197 0.178 0.079 1
NOJT156M002#WJ T 15 2.5 85 1.7 105 1.0 6 2 0.219 0.197 0.088 1
NOJA226M002#WJ A 22 2.5 85 1.7 105 1.1 6 1.9 0.218 0.196 0.087 1
NOJP226M002#WJ P 22 2.5 85 1.7 105 1.1 10 3.8 0.138 0.124 0.055 1
NOJT226M002#WJ T 22 2.5 85 1.7 105 1.1 6 1.9 0.225 0.202 0.090 1
NOJA336M002#WJ A 33 2.5 85 1.7 105 1.7 6 1.7 0.230 0.207 0.092 1
NOJB336M002#WJ B 33 2.5 85 1.7 105 1.7 6 1.7 0.245 0.220 0.098 1
NOJT336M002#WJ T 33 2.5 85 1.7 105 1.7 6 1.7 0.238 0.214 0.095 1
NOJA476M002#WJ A 47 2.5 85 1.7 105 2.4 8 1.6 0.237 0.213 0.095 1
NOJB476M002#WJ B 47 2.5 85 1.7 105 2.4 6 1.6 0.252 0.227 0.101 1
NOJT476M002#WJ T 47 2.5 85 1.7 105 2.4 10 1.6 0.245 0.220 0.098 1
NOJB686M002#WJ B 68 2.5 85 1.7 105 3.4 6 1.5 0.261 0.235 0.104 1
NOJC686M002#WJ C 68 2.5 85 1.7 105 3.4 6 0.5 0.514 0.462 0.206 1
NOJW686M002#WJ W 68 2.5 85 1.7 105 3.4 6 0.4 0.520 0.468 0.208 1
NOJB107M002#WJ B 100 2.5 85 1.7 105 5.0 6 1.4 0.270 0.243 0.108 1
NOJC107M002#WJ C 100 2.5 85 1.7 105 5.0 6 0.4 0.574 0.517 0.230 1
NOJW107M002#WJ W 100 2.5 85 1.7 105 5.0 6 0.4 0.520 0.468 0.208 1
NOJC157M002#WJ C 150 2.5 85 1.7 105 7.5 6 0.4 0.574 0.517 0.230 1
NOJX157M002#WJ X 150 2.5 85 1.7 105 7.5 6 0.4 0.548 0.493 0.219 3
NOJC227M002#WJ C 220 2.5 85 1.7 105 11.0 8 0.4 0.574 0.517 0.230 1
NOJY227M002#WJ Y 220 2.5 85 1.7 105 11.0 8 0.4 0.612 0.551 0.245 3
NOJC337M002#WJ C 330 2.5 85 1.7 105 16.5 10 0.3 0.663 0.597 0.265 1
NOJD337M002#WJ D 330 2.5 85 1.7 105 16.5 10 0.3 0.775 0.697 0.310 3
NOJY337M002#WJ Y 330 2.5 85 1.7 105 16.5 10 0.3 0.707 0.636 0.283 3
NOJD477M002#WJ D 470 2.5 85 1.7 105 23.5 12 0.3 0.775 0.697 0.310 3
NOJE477M002#WJ E 470 2.5 85 1.7 105 23.5 10 0.3 0.812 0.731 0.325 3
NOJE687M002#WJ E 680 2.5 85 1.7 105 34.0 14 0.3 0.812 0.731 0.325 3
NOJV108M002#WJ V 1000 2.5 85 1.7 105 50.0 16 0.3 1.000 0.900 0.400 3
4 Volt @ 85°C
NOJP685M004#WJ P 6.8 4 85 2.7 105 1.0 6 5.3 0.117 0.105 0.047 1
NOJS685M004#WJ S 6.8 4 85 2.7 105 1.0 6 2.6 0.173 0.156 0.069 1
NOJP106M004#WJ P 10 4 85 2.7 105 1.0 20 4.5 0.126 0.114 0.051 1
NOJS106M004#WJ S 10 4 85 2.7 105 1.0 8 2.2 0.188 0.169 0.075 1
NOJT106M004#WJ T 10 4 85 2.7 105 1.0 6 2.2 0.209 0.188 0.084 1
NOJA156M004#WJ A 15 4 85 2.7 105 1.2 6 2 0.212 0.191 0.085 1
NOJP156M004#WJ P 15 4 85 2.7 105 1.2 10 4.1 0.133 0.119 0.053 1
NOJT156M004#WJ T 15 4 85 2.7 105 1.2 6 2 0.219 0.197 0.088 1
NOJA226M004#WJ A 22 4 85 2.7 105 1.8 6 1.9 0.218 0.196 0.087 1
NOJB226M004#WJ B 22 4 85 2.7 105 1.8 6 1.9 0.232 0.209 0.093 1
NOJT226M004#WJ T 22 4 85 2.7 105 1.8 6 1.8 0.231 0.208 0.092 1
NOJA336M004#WJ A 33 4 85 2.7 105 2.6 10 1.7 0.230 0.207 0.092 1
NOJB336M004#WJ B 33 4 85 2.7 105 2.6 6 1.7 0.245 0.220 0.098 1
NOJT336M004#WJ T 33 4 85 2.7 105 2.6 14 2 0.219 0.197 0.088 1
NOJA476M004#WJ A 47 4 85 2.7 105 3.8 18 2.2 0.202 0.182 0.081 1
NOJB476M004#WJ B 47 4 85 2.7 105 3.8 6 1.6 0.252 0.227 0.101 1
NOJC476M004#WJ C 47 4 85 2.7 105 3.8 6 0.5 0.514 0.462 0.206 1
NOJW476M004#WJ W 47 4 85 2.7 105 3.8 6 0.5 0.465 0.418 0.186 1
040320

OxiCap® NOJ Series
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 105ºC
(Ω)
NOJB686M004#WJ B 68 4 85 2.7 105 5.4 6 1.5 0.261 0.235 0.104 1
NOJC686M004#WJ C 68 4 85 2.7 105 5.4 6 0.5 0.514 0.462 0.206 1
NOJW686M004#WJ W 68 4 85 2.7 105 5.4 6 0.4 0.520 0.468 0.208 1
NOJB107M004#WJ B 100 4 85 2.7 105 8.0 16 1.4 0.270 0.243 0.108 1
NOJB107M004#WB B 100 4 85 2.7 105 8.0 16 0.25 0.639 0.575 0.255 3
NOJC107M004#WJ C 100 4 85 2.7 105 8.0 6 0.4 0.574 0.517 0.230 1
NOJW107M004#WJ W 100 4 85 2.7 105 8.0 8 0.4 0.520 0.468 0.208 1
NOJX107M004#WJ X 100 4 85 2.7 105 8.0 6 0.4 0.548 0.493 0.219 3
NOJC157M004#WJ C 150 4 85 2.7 105 12.0 6 0.4 0.574 0.517 0.230 1
NOJD157M004#WJ D 150 4 85 2.7 105 12.0 6 0.3 0.775 0.697 0.310 3
NOJY157M004#WJ Y 150 4 85 2.7 105 12.0 6 0.4 0.612 0.551 0.245 3
NOJC227M004#WJ C 220 4 85 2.7 105 17.6 8 0.4 0.574 0.517 0.230 1
NOJD227M004#WJ D 220 4 85 2.7 105 17.6 8 0.4 0.671 0.604 0.268 3
NOJF227M004#WJ F 220 4 85 2.7 105 17.6 10 0.4 0.548 0.493 0.219 1
NOJY227M004#WJ Y 220 4 85 2.7 105 17.6 10 0.4 0.612 0.551 0.245 3
NOJD337M004#WJ D 330 4 85 2.7 105 26.4 8 0.3 0.775 0.697 0.310 3
NOJY337M004#WJ Y 330 4 85 2.7 105 26.4 12 0.3 0.707 0.636 0.283 3
NOJD477M004#WJ D 470 4 85 2.7 105 37.6 12 0.3 0.775 0.697 0.310 3
NOJE477M004#WJ E 470 4 85 2.7 105 37.6 12 0.3 0.812 0.731 0.325 3
NOJE687M004#WJ E 680 4 85 2.7 105 54.4 14 0.3 0.812 0.731 0.325 3
NOJV687M004#WJ V 680 4 85 2.7 105 54.4 14 0.3 1.000 0.900 0.400 3
NOJV108M004#WJ V 1000 4 85 2.7 105 80.0 18 0.3 1.000 0.900 0.400 3
6.3 Volt @ 85°C
NOJA475M006#WJ A 4.7 6.3 85 4 105 1.1 6 3.2 0168 0.151 0.067 1
NOJP475M006#WJ P 4.7 6.3 85 4 105 1.0 6 6.1 0.109 0.098 0.043 1
NOJS475M006#WJ S 4.7 6.3 85 4 105 1.0 6 3.2 0.156 0.141 0.062 1
NOJA685M006#WJ A 6.8 6.3 85 4 105 1.1 6 2.6 0.186 0.167 0.074 1
NOJP685M006#WJ P 6.8 6.3 85 4 105 1.0 10 5.2 0.118 0.106 0.047 1
NOJS685M006#WJ S 6.8 6.3 85 4 105 1.0 8 2.7 0.170 0.153 0.068 1
NOJT685M006#WJ T 6.8 6.3 85 4 105 1.0 6 2.6 0.192 0.173 0.077 1
NOJA106M006#WJ A 10 6.3 85 4 105 1.2 6 2.2 0.202 0.182 0.081 1
NOJP106M006#WJ P 10 6.3 85 4 105 1.2 10 4.5 0.126 0.114 0.051 1
NOJT106M006#WJ T 10 6.3 85 4 105 1.2 6 2.2 0.209 0.188 0.084 1
NOJA156M006#WJ A 15 6.3 85 4 105 1.8 8 2 0.212 0.191 0.085 1
NOJB156M006#WJ B 15 6.3 85 4 105 1.8 6 2 0.226 0.203 0.090 1
NOJA226M006#WJ A 22 6.3 85 4 105 2.6 8 1.8 0.224 0.201 0.089 1
NOJB226M006#WJ B 22 6.3 85 4 105 2.6 6 1.9 0.232 0.209 0.093 1
NOJT226M006#WJ T 22 6.3 85 4 105 2.6 8 1.8 0.231 0.208 0.092 1
NOJB336M006#WJ B 33 6.3 85 4 105 4.0 6 1.7 0.245 0.220 0.098 1
NOJB336M006#WB B 33 6.3 85 4 105 4.0 6 0.7 0.382 0.344 0.153 3
NOJC336M006#WJ C 33 6.3 85 4 105 4.0 6 0.5 0.514 0.462 0.206 1
NOJW336M006#WJ W 33 6.3 85 4 105 4.0 6 0.5 0.465 0.418 0.186 1
NOJB476M006#WJ B 47 6.3 85 4 105 5.6 6 0.8 0.357 0.321 0.143 1
NOJC476M006#WJ C 47 6.3 85 4 105 5.7 6 0.5 0.514 0.462 0.206 1
NOJW476M006#WJ W 47 6.3 85 4 105 5.7 6 0.5 0.465 0.418 0.186 1
NOJB686M006#WJ B 68 6.3 85 4 105 8.2 20 1.5 0.261 0.235 0.104 1
NOJC686M006#WJ C 68 6.3 85 4 105 8.2 6 0.5 0.514 0.462 0.206 1
NOJX686M006#WJ X 68 6.3 85 4 105 8.2 6 0.5 0.490 0.441 0.196 3
NOJY686M006#WJ Y 68 6.3 85 4 105 8.2 6 0.5 0.548 0.493 0.219 3
NOJB107M006#WJ B 100 6.3 85 4 105 60.0 20 1.7 0.245 0.220 0.098 1
NOJB107M006#WB B 100 6.3 85 4 105 60.0 20 0.4 0.505 0.454 0.202 3
NOJC107M006#WJ C 100 6.3 85 4 105 12.0 8 0.4 0.574 0.517 0.230 1
NOJD107M006#WJ D 100 6.3 85 4 105 12.0 6 0.4 0.671 0.604 0.268 3
NOJF107M006#WJ F 100 6.3 85 4 105 12 8 0.4 0.548 0.493 0.219 1
NOJY107M006#WJ Y 100 6.3 85 4 105 12.0 6 0.4 0.612 0.551 0.245 3
NOJC157M006#WJ C 150 6.3 85 4 105 18.0 6 0.4 0.574 0.517 0.230 1
NOJD157M006#WJ D 150 6.3 85 4 105 18.0 6 0.4 0.671 0.604 0.268 3
NOJF157M006#WJ F 150 6.3 85 4 105 18.0 8 0.4 0.548 0.493 0.219 1
NOJY157M006#WJ Y 150 6.3 85 4 105 18.0 6 0.4 0.612 0.551 0.245 3
NOJC227M006#WJ C 220 6.3 85 4 105 26.4 14 0.4 0.574 0.517 0.230 1
NOJD227M006#WJ D 220 6.3 85 4 105 26.4 8 0.4 0.671 0.604 0.268 3
NOJE227M006#WJ E 220 6.3 85 4 105 26.4 12 0.4 0.704 0.633 0.281 3
NOJY227M006#WJ Y 220 6.3 85 4 105 26.4 10 0.4 0.612 0.551 0.245 3
NOJD337M006#WJ D 330 6.3 85 4 105 39.6 10 0.3 0.775 0.697 0.310 3
NOJE337M006#WJ E 330 6.3 85 4 105 39.6 12 0.3 0.812 0.731 0.325 3
NOJE477M006#WJ E 470 6.3 85 4 105 56.4 16 0.3 0.812 0.731 0.325 3
NOJE477M006#WB E 470 6.3 85 4 105 56.4 16 0.075 1.625 1.462 0.650 3
NOJV477M006#WJ V 470 6.3 85 4 105 56.4 14 0.3 1.000 0.900 0.400 3
040320

OxiCap® NOJ Series
ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 105ºC
(Ω)
10 Volt @ 85°C
NOJP225M010#WJ P 2.2 10 85 7 105 1.0 8 8.3 0.093 0.084 0.037 1
NOJP335M010#WJ P 3.3 10 85 7 105 1.0 8 7 0.101 0.091 0.041 1
NOJA475M010#WJ A 4.7 10 85 7 105 1.0 6 3.1 0.170 0.153 0.068 1
NOJT475M010#WJ T 4.7 10 85 7 105 1.0 6 3.1 0.176 0.158 0.070 1
NOJA685M010#WJ A 6.8 10 85 7 105 1.4 6 2.6 0.186 0.167 0.074 1
NOJT685M010#WJ T 6.8 10 85 7 105 1.4 6 2.6 0.192 0.173 0.077 1
NOJA106M010#WJ A 10 10 85 7 105 2.0 6 2.2 0.202 0.182 0.081 1
NOJB106M010#WJ B 10 10 85 7 105 2.0 6 1 0.319 0.287 0.128 1
NOJT106M010#WJ T 10 10 85 7 105 2.0 6 2.2 0.209 0.188 0.084 1
NOJA156M010#WJ A 15 10 85 7 105 3.0 6 2 0.212 0.191 0.085 1
NOJB156M010#WJ B 15 10 85 7 105 3.0 6 2 0.226 0.203 0.090 1
NOJB226M010#WJ B 22 10 85 7 105 4.4 6 1.8 0.238 0.214 0.095 1
NOJB226M010#WB B 22 10 85 7 105 4.4 6 0.7 0.382 0.344 0.153 3
NOJC226M010#WJ C 22 10 85 7 105 4.4 6 0.5 0.514 0.462 0.206 1
NOJC336M010#WJ C 33 10 85 7 105 6.6 6 0.5 0.514 0.462 0.206 1
NOJC476M010#WJ C 47 10 85 7 105 9.4 6 0.4 0.574 0.517 0.230 1
NOJC686M010#WJ C 68 10 85 7 105 13.6 12 0.5 0.514 0.462 0.206 1
NOJD107M010#WJ D 100 10 85 7 105 20.0 12 0.4 0.671 0.604 0.268 3
NOJD107M010#WB D 100 10 85 7 105 20.0 12 0.15 1.095 0.986 0.438 3

The EIA & CECC standards for capacitors allow an ESR movement to 1.25 times catalog limit post mounting.
NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards.
081821

OxiCap® NOJ Series
QUALIFICATION TABLE
NOJ series (Temperature range -55ºC to +105ºC)
TEST
Apply rated voltage (Ur) at 85ºC and / or category DCL initial limit
Store at 105ºC, no voltage applied, for 2000 hours. DCL initial limit
Apply rated voltage (Ur) at 85°C, 85°C relative humidity DCL 2 x initial limit
1 +20 15
Stability 4 +85 15
5 +105 15
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
040320

OxiCap® NOJ Series
SERIES LINE UP : NIOBIUM OXIDE OxiCap® CAPACITORS
122920

NLJ Series – High CV OxiCap®
OxiCap® NLJ Series

Niobium Oxide Capacitors High CV Consumer Series
FEATURES
• Environmentally Friendly
• Consumer Applications COMPONENT
• OxiCap® Non-Burn Technology
• RoHS Compliance
• Lead-Free Solution
• CV Range: 22-150μF / 4-10V Elektra Award
2005
APPLICATIONS
• Consumer Handhelds and Entertainment
L W
NON-BURN
NON-SMOKE
H
A S A W1 EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1 ±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) –0.10 (0.004) –0.10 (0.004) (0.008) –0.20 (0.008)
MARKING A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
A, B, G, S, T CASE B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
Rated Voltage G 1206 3216-15 3.20 (0.126) 1.60 (0.063) 1.50 (0.059) max 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
Capacitance Value in pF A = 10V
226 = 22µF
1.00±0.10
P 0805 2012-15 2.05 (0.081) 1.35 (0.053) 1.50 (0.059) max 0.50 (0.020) 0.85 (0.033)
(0.039±0.004)
226 A
Polarity
Band OxiCap® LOGO
(Anode+) S 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) max 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
XXXXX ID Code
T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) max 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
P CASE W1 dimension applies to the termination width for A dimensional area only.
156 = 15µF
156 OxiCap® LOGO
Polarity
G
Band
(Anode+) Rated Voltage Code
G = 4V
HOW TO ORDER
NLJ A 476 M 006 R 1600
Type Case Size Capacitance Code Tolerance Rated Packaging ESR in mΩ

See table 1st two digits represent M = ±20% DC Voltage R = Pure Tin 7" Reel
above significant figures, 004 = 4Vdc S = Pure Tin 13" Reel
3rd digit represents 006 = 6.3Vdc
multiplier in pF 010 = 10Vdc
Category Voltage (VC) at 105°C: 1.3 2 3.3
Reliability: 0.2% per 1000 hours at 85°C, 0.5xVR, 0.1Ω/V series impedance
with 60% confidence level
102220

OxiCap® NLJ Series
Capacitance Rated Voltage DC to 40°C

μF Code 4V (G) 6.3V (J) 10V (A)
22 226 P(4000) S(1800) A(4000)/G(3000)
33 336 G(2200) A(1700)
47 476 A(1600)/T(1600) B(1000)
68 686
100 107 B(1700)
150 157 B(1500)

standards.

Rated Rated Category Category Maximum DCL
Part Number Voltage Temperature Voltage Temperature Surge Current Max. MSL
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (A) (μA) 25ºC 85ºC 105ºC
(mΩ)
4 Volt @ 85°C
NLJP226M004#4000 P 22 4 85 1.3 105 0.4 8.8 4000 134 121 54 3
NLJB157M004#1500 B 150 4 85 1.3 105 1.0 60.0 1500 261 235 104 3
6.3 Volt @ 85°C
NLJS226M006#1800 S 22 6.3 85 2 105 1.4 13.2 1800 208 187 83 3
NLJG336M006#2200 G 33 6.3 85 2 105 1.2 19.8 2200 195 176 78 3
NLJA476M006#1600 A 47 6.3 85 2 105 1.5 28.2 1600 237 213 98 3
NLJT476M006#1600 T 47 6.3 85 2 105 1.5 28.2 1600 245 220 98 3
NLJB107M006#1700 B 100 6.3 85 2 105 1.5 60.0 1700 245 220 98 3
10 Volt @ 85°C
NLJA226M010#4000 A 22 10 85 3.3 105 1.1 22.0 4000 150 135 60 3
NLJG226M010#3000 G 22 10 85 3.3 105 1.4 22.0 3000 167 151 67 3
NLJA336M010#1700 A 33 10 85 3.3 105 2.3 33.0 1700 230 207 92 3
NLJB476M010#1000 B 47 10 85 3.3 105 3.4 47.0 1000 319 287 128 3

All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V
RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same
case size, to the same reliability standards.
100% Rated range

90% Recommended derating
100% 100%
80%
70% 80% 80%
60% 67%
50%
40% 50%
30% 33%
20%
10%
0%
-55°C 0°C 40°C 60°C 85°C 105°C
081821

OxiCap® NLJ Series
QUALIFICATION TABLE
NLJ series (Temperature range -55ºC to +105ºC)
TEST
Endurance
impedance of ≤0.1Ω/V. Stabilize at room temperature ΔC/C within ±10% of initial value
Humidity
+20ºC -55ºC +20ºC +85ºC +105ºC +20ºC
1 +20 15
2 -55 15 DCL 2 x IL* n/a 2 x IL** 10 x IL* 12.5 x IL* 2 x IL*
Stability 4 +85 15 ΔC/C n/a +0/-20% ±5% +20/-0% +25/-0% ±5%
5 +105 15
Apply 1.3x rated voltage (Ur) at 40ºC for 1000 cycles of DCL 2 x initial limit
Surge
duration 6 min (30 sec charge, 5 min 30 sec discharge)
Voltage ΔC/C within ±5% of initial value
DCL initial limit
Mechanical
Shock
DF initial limit
ESR initial limit
DCL initial limit
DF initial limit
ESR initial limit
*Initial Limit
040320

OxiCap® NLJ Series
122920

NOS Series – Low ESR OxiCap®
OxiCap® NOS Low ESR Series

Niobium Oxide Capacitor
FEATURES
• Low ESR Nb0 Capacitors
• Non-Burn Safe Technology
• Reliability Level: 0.2%/1000 hrs.
• CV Range: 10-1000μF / 1.8-8V COMPONENT
• IBM Global Approval Received in 2004
• Elektra Award Received in 2005
• Meets Requirements of AEC-Q200
• -55 to +125°C Operation Temperature Elektra Award
2005
APPLICATIONS
L W • Medium Power DC/DC for
Transportation and Automotive Industry
NON-BURN
NON-SMOKE
H
A S A W1
MARKING Code
EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1 ±0.20 A+0.30 (0.012)
S Min.
Code Metric (0.008) –0.10 (0.004) –0.10 (0.004) (0.008) –0.20 (0.008)
A, B, C, D, E, V, W, X, Y CASE A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
OxiCap® LOGO
227 = 220µF
Polarity C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
Band 227 G Rated Voltage
(Anode+) G = 4V
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
XXXXX ID Code
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
W 2312 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) max. 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) max. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
HOW TO ORDER
NOS D 107 M 006 R 0100 –
Type Case Size Capacitance Code Tolerance Rated Packaging ESR in mΩ Additional characters
See table 1st two digits represent M = ±20% DC Voltage R = Pure Tin 7" Reel may be added for
above significant figures, 001 = 1.8Vdc S = Pure Tin 13" Reel special requirements
3rd digit represents 002 = 2.5Vdc V = Dry pack Option
multiplier in pF 004 = 4Vdc (selected codes only)
006 = 6.3Vdc with exception of
008 = 8Vdc
D, E, X, Y, V cases
Rated Voltage DC (VR) ≤ +85°C: 1.8 2.5 4 6.3 8
Category Voltage (VC) ≤ +105ºC: 1.2 1.7 2.7 4 7
Category Voltage (VC) ≤ +125ºC: 0.9 1.3 2 3 4
Surge Voltage (VS) ≤ +85ºC: 2.3 3.3 5.2 8 10
Surge Voltage (VS) ≤ +105ºC: 1.6 2.2 3.4 5 8
Surge Voltage (VS) ≤ +125ºC: 1.2 1.7 2.6 4 5.3
102220


μF Code 1.8V (x) 2.5V (e) 4.0V (G) 6.3V (J) 8V (P)
A(2200)
10 106 A(800,1000,2000,2200)
B(1000)
15 156 A(1500,2000) B(600,2000) B(1000)
B(700,1800)
22 226 A(900,1900) B(600,1900) B(600,1900)
C(500)
B(600,1700)
33 336 B(1700) B(600,1700) C(500) C(500)
W(250,500)
B(500,1600)
B(500,800)
47 476 B(500,1600) C(300,500) C(400)
C(300,500)
W(150,500)
C(75,200,500)
C(200,500)
68 686 C(200,500) X(100,500) C(500)
W(150,400)
Y(100,500)
C(150,400)
B(350,1400) C(70,150,400)
100 107 C(150,400) D(80,100,400 D(400)
W(150,400) X(100,400)
Y(100,400)
C(65,150,400) C(90,150,400) D(50,70,100,400)

150 157 C(400)
X(100,400) Y(100,400) Y(100,400)
C(125,400) C(80,125,400) D(40,60,100,400) D(45,60,100,400)

220 227
X(100,400) Y(100,400) Y(100,400) E(80,100,400)
D(35,55,100,300)
D(35,50,100,300)
330 337 Y(100,300) E(100) E(80,100,300)
Y(100,300)
Y(150,300)
D(35,55,100,300) D(100,300)
470 477 Y(100,300) V(75,300)
E(100,300) E(75,100,300)
680 687 E(60,300) V(75,300)
1000 108 V(50,300)
040620


Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
1.8 Volt @ 85°C
NOSB107M001#0350 B 100 1.8 85 0.9 125 3.6 6 350 0.540 0.486 0.216 1
NOSB107M001#1400 B 100 1.8 85 0.9 125 3.6 6 1400 0.270 0.243 0.108 1
NOSW107M001#0150 W 100 1.8 85 0.9 125 3.6 6 150 0.849 0.764 0.339 1
NOSW107M001#0400 W 100 1.8 85 0.9 125 3.6 6 400 0.520 0.468 0.208 1
NOSC157M001#0400 C 150 1.8 85 0.9 125 5.4 8 400 0.574 0.517 0.230 1
NOSC227M001#0125 C 220 1.8 85 0.9 125 8.0 8 125 1.028 0.925 0.411 1
NOSC227M001#0400 C 220 1.8 85 0.9 125 8.0 8 400 0.574 0.517 0.230 1
NOSX227M001#0100 X 220 1.8 85 0.9 125 8.0 8 100 1.095 0.986 0.438 3
NOSX227M001#0400 X 220 1.8 85 0.9 125 8.0 8 400 0.548 0.493 0.219 3
NOSY337M001#0100 Y 330 1.8 85 0.9 125 11.9 8 100 1.225 1.102 0.490 3
NOSY337M001#0300 Y 330 1.8 85 0.9 125 11.9 8 300 0.707 0.636 0.283 3
NOSY477M001#0100 Y 470 1.8 85 0.9 125 17.0 8 100 1.225 1.102 0.490 3
NOSY477M001#0300 Y 470 1.8 85 0.9 125 17.0 8 300 0.707 0.636 0.283 3
2.5 Volt @ 85°C
NOSA226M002#0900 A 22 2.5 85 1.3 125 1.1 6 900 0.316 0.285 0.126 1
NOSA226M002#1900 A 22 2.5 85 1.3 125 1.1 6 1900 0.218 0.196 0.087 1
NOSB336M002#1700 B 33 2.5 85 1.3 125 1.7 6 1700 0.245 0.220 0.098 1
NOSB476M002#0500 B 47 2.5 85 1.3 125 2.4 6 500 0.452 0.406 0.181 1
NOSB476M002#1600 B 47 2.5 85 1.3 125 2.4 6 1600 0.252 0.227 0.101 1
NOSC686M002#0200 C 68 2.5 85 1.3 125 3.4 6 200 0.812 0.731 0.325 1
NOSC686M002#0500 C 68 2.5 85 1.3 125 3.4 6 500 0.514 0.462 0.206 1
NOSW686M002#0150 W 68 2.5 85 1.3 125 3.4 6 150 0.849 0.764 0.339 1
NOSW686M002#0400 W 68 2.5 85 1.3 125 3.4 6 400 0.520 0.468 0.208 1
NOSC107M002#0150 C 100 2.5 85 1.3 125 5.0 6 150 0.938 0.844 0.375 1
NOSC107M002#0400 C 100 2.5 85 1.3 125 5.0 6 400 0.574 0.517 0.230 1
NOSC157M002#0065 C 150 2.5 85 1.3 125 7.5 6 65 1.425 1.283 0.570 1
NOSC157M002#0150 C 150 2.5 85 1.3 125 7.5 6 150 0.938 0.844 0.375 1
NOSC157M002#0400 C 150 2.5 85 1.3 125 7.5 6 400 0.574 0.517 0.230 1
NOSX157M002#0100 X 150 2.5 85 1.3 125 7.5 6 100 1.095 0.986 0.438 3
NOSX157M002#0400 X 150 2.5 85 1.3 125 7.5 6 400 0.548 0.493 0.219 3
NOSC227M002#0080 C 220 2.5 85 1.3 125 11.0 8 80 1.285 1.156 0.514 1
NOSC227M002#0125 C 220 2.5 85 1.3 125 11.0 8 125 1.028 0.925 0.411 1
NOSC227M002#0400 C 220 2.5 85 1.3 125 11.0 8 400 0.574 0.517 0.230 1
NOSY227M002#0100 Y 220 2.5 85 1.3 125 11.0 8 100 1.225 1.102 0.490 3
NOSY227M002#0400 Y 220 2.5 85 1.3 125 11.0 8 400 0.612 0.551 0.245 3
NOSD337M002#0035 D 330 2.5 85 1.3 125 16.5 10 35 2.268 2.041 0.907 3
NOSD337M002#0050 D 330 2.5 85 1.3 125 16.5 10 50 1.897 1.708 0.759 3
NOSD337M002#0100 D 330 2.5 85 1.3 125 16.5 10 100 1.342 1.207 0.537 3
NOSD337M002#0300 D 330 2.5 85 1.3 125 16.5 10 300 0.775 0.697 0.310 3
NOSY337M002#0100 Y 330 2.5 85 1.3 125 16.5 10 100 1.225 1.102 0.490 3
NOSY337M002#0300 Y 330 2.5 85 1.3 125 16.5 10 300 0.707 0.636 0.283 3
NOSD477M002#0035 D 470 2.5 85 1.3 125 23.5 12 35 2.268 2.041 0.907 3
NOSD477M002#0055 D 470 2.5 85 1.3 125 23.5 12 55 1.809 1.628 0.724 3
NOSD477M002#0100 D 470 2.5 85 1.3 125 23.5 12 100 1.342 1.207 0.537 3
NOSD477M002#0300 D 470 2.5 85 1.3 125 23.5 12 300 0.775 0.697 0.310 3
NOSE477M002#0100 E 470 2.5 85 1.3 125 23.5 10 100 1.407 1.266 0.563 3
NOSE477M002#0300 E 470 2.5 85 1.3 125 23.5 10 300 0.812 0.731 0.325 3
NOSE687M002#0060 E 680 2.5 85 1.3 125 34.0 14 60 1.817 1.635 0.727 3
NOSE687M002#0300 E 680 2.5 85 1.3 125 34.0 14 300 0.812 0.731 0.325 3
NOSV108M002#0050 V 1000 2.5 85 1.3 125 50.0 16 50 2.449 2.205 0.980 3
NOSV108M002#0300 V 1000 2.5 85 1.3 125 50.0 16 300 1.000 0.900 0.400 3
4 Volt @ 85°C
NOSA156M004#1500 A 15 4 85 2 125 1.2 6 1500 0.245 0.220 0.098 1
NOSA156M004#2000 A 15 4 85 2 125 1.2 6 2000 0.212 0.191 0.085 1
NOSB226M004#0600 B 22 4 85 2 125 1.8 6 600 0.412 0.371 0.165 1
NOSB226M004#1900 B 22 4 85 2 125 1.8 6 1900 0.232 0.209 0.093 1
NOSB336M004#0600 B 33 4 85 2 125 2.6 6 600 0.412 0.371 0.165 1
NOSB336M004#1700 B 33 4 85 2 125 2.6 6 1700 0.245 0.220 0.098 1
NOSB476M004#0500 B 47 4 85 2 125 3.8 6 500 0.452 0.406 0.181 1
NOSB476M004#1600 B 47 4 85 2 125 3.8 6 1600 0.252 0.227 0.101 1
NOSC476M004#0300 C 47 4 85 2 125 3.8 6 300 0.663 0.597 0.265 1
NOSC476M004#0500 C 47 4 85 2 125 3.8 6 500 0.514 0.462 0.206 1
NOSW476M004#0150 W 47 4 85 2 125 3.8 6 150 0.849 0.764 0.339 1
NOSW476M004#0500 W 47 4 85 2 125 3.8 6 500 0.465 0.418 0.186 1
NOSC686M004#0200 C 68 4 85 2 125 5.4 6 200 0.812 0.731 0.325 1
NOSC686M004#0500 C 68 4 85 2 125 5.4 6 500 0.514 0.462 0.206 1
NOSC107M004#0070 C 100 4 85 2 125 8.0 6 70 1.373 1.236 0.549 1
NOSC107M004#0150 C 100 4 85 2 125 8.0 6 150 0.938 0.844 0.375 1
NOSC107M004#0400 C 100 4 85 2 125 8.0 6 400 0.574 0.517 0.230 1
NOSX107M004#0100 X 100 4 85 2 125 8.0 6 100 1.095 0.986 0.438 3
040320


Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
NOSX107M004#0400 X 100 4 85 2 125 8.0 6 400 0.548 0.493 0.219 3
NOSC157M004#0090 C 150 4 85 2 125 12.0 6 90 1.211 1.090 0.484 1
NOSC157M004#0150 C 150 4 85 2 125 12.0 6 150 0.938 0.844 0.375 1
NOSC157M004#0400 C 150 4 85 2 125 12.0 6 400 0.574 0.517 0.230 1
NOSY157M004#0100 Y 150 4 85 2 125 12.0 6 100 1.225 1.102 0.490 3
NOSY157M004#0400 Y 150 4 85 2 125 12.0 6 400 0.612 0.551 0.245 3
NOSD227M004#0040 D 220 4 85 2 125 17.6 8 40 2.121 1.909 0.849 3
NOSD227M004#0060 D 220 4 85 2 125 17.6 8 60 1.732 1.559 0.693 3
NOSD227M004#0100 D 220 4 85 2 125 17.6 8 100 1.342 1.207 0.537 3
NOSD227M004#0400 D 220 4 85 2 125 17.6 8 400 0.671 0.604 0.268 3
NOSY227M004#0100 Y 220 4 85 2 125 17.6 10 100 1.225 1.102 0.490 3
NOSY227M004#0400 Y 220 4 85 2 125 17.6 10 400 0.612 0.551 0.245 3
NOSD337M004#0035 D 330 4 85 2 125 26.4 8 35 2.268 2.041 0.907 3
NOSD337M004#0055 D 330 4 85 2 125 26.4 8 55 1.809 1.628 0.724 3
NOSD337M004#0100 D 330 4 85 2 125 26.4 8 100 1.342 1.207 0.537 3
NOSD337M004#0300 D 330 4 85 2 125 26.4 8 300 0.775 0.697 0.310 3
NOSE337M004#0100 E 330 4 85 2 125 26.4 8 100 1.407 1.266 0.563 3
NOSY337M004#0150 Y 330 4 85 2 125 26.4 12 150 1.000 0.900 0.400 3
NOSY337M004#0300 Y 330 4 85 2 125 26.4 12 300 0.707 0.636 0.283 3
NOSD477M004#0100 D 470 4 85 2 125 37.6 12 100 1.342 1.207 0.537 3
NOSD477M004#0300 D 470 4 85 2 125 37.6 12 300 0.775 0.697 0.310 3
NOSE477M004#0075 E 470 4 85 2 125 37.6 12 75 1.625 1.462 0.650 3
NOSE477M004#0100 E 470 4 85 2 125 37.6 12 100 1.407 1.266 0.563 3
NOSE477M004#0300 E 470 4 85 2 125 37.6 12 300 0.812 0.731 0.325 3
NOSV687M004#0075 V 680 4 85 2 125 54.4 14 75 2.000 1.800 0.800 3
NOSV687M004#0300 V 680 4 85 2 125 54.4 14 300 1.000 0.900 0.400 3
6.3 Volt @ 85°C
NOSA106M006#0800 A 10 6.3 85 3 125 1.2 6 800 0.335 0.302 0.134 1
NOSA106M006#1000 A 10 6.3 85 3 125 1.2 6 1000 0.300 0.270 0.120 1
NOSA106M006#2000 A 10 6.3 85 3 125 1.2 6 2000 0.212 0.191 0.085 1
NOSA106M006#2200 A 10 6.3 85 3 125 1.2 6 2200 0.202 0.182 0.081 1
NOSB156M006#0600 B 15 6.3 85 3 125 1.8 6 600 0.412 0.371 0.165 1
NOSB156M006#2000 B 15 6.3 85 3 125 1.8 6 2000 0.226 0.203 0.090 1
NOSB226M006#0600 B 22 6.3 85 3 125 2.6 6 600 0.412 0.371 0.165 1
NOSB226M006#1900 B 22 6.3 85 3 125 2.6 6 1900 0.232 0.209 0.093 1
NOSB336M006#0600 B 33 6.3 85 3 125 4.0 6 600 0.412 0.371 0.165 1
NOSB336M006#1700 B 33 6.3 85 3 125 4.0 6 1700 0.245 0.220 0.098 1
NOSC336M006#0500 C 33 6.3 85 3 125 4.0 6 500 0.514 0.462 0.206 1
NOSW336M006#0250 W 33 6.3 85 3 125 4.0 6 250 0.657 0.592 0.263 1
NOSW336M006#0500 W 33 6.3 85 3 125 4.0 6 500 0.465 0.418 0.186 1
NOSB476M006#0500 B 47 6.3 85 3 125 5.6 6 500 0.452 0.406 0.181 1
NOSB476M006#0800 B 47 6.3 85 3 125 5.6 6 800 0.357 0.321 0.143 1
NOSC476M006#0300 C 47 6.3 85 3 125 5.7 6 300 0.663 0.597 0.265 1
NOSC476M006#0500 C 47 6.3 85 3 125 5.7 6 500 0.514 0.462 0.206 1
NOSC686M006#0075 C 68 6.3 85 3 125 8.2 6 75 1.327 1.194 0.531 1
NOSC686M006#0200 C 68 6.3 85 3 125 8.2 6 200 0.812 0.731 0.325 1
NOSC686M006#0500 C 68 6.3 85 3 125 8.2 6 500 0.514 0.462 0.206 1
NOSX686M006#0100 X 68 6.3 85 3 125 8.2 6 100 1.095 0.986 0.438 3
NOSX686M006#0500 X 68 6.3 85 3 125 8.2 6 500 0.490 0.441 0.196 3
NOSY686M006#0100 Y 68 6.3 85 3 125 8.2 6 100 1.225 1.102 0.490 3
NOSY686M006#0500 Y 68 6.3 85 3 125 8.2 6 500 0.548 0.493 0.219 3
NOSC107M006#0150 C 100 6.3 85 3 125 12.0 8 150 0.938 0.844 0.375 1
NOSC107M006#0400 C 100 6.3 85 3 125 12.0 8 400 0.574 0.517 0.230 1
NOSD107M006#0080 D 100 6.3 85 3 125 12.0 6 80 1.500 1.350 0.600 3
NOSD107M006#0100 D 100 6.3 85 3 125 12.0 6 100 1.342 1.207 0.537 3
NOSD107M006#0400 D 100 6.3 85 3 125 12.0 6 400 0.671 0.604 0.268 3
NOSY107M006#0100 Y 100 6.3 85 3 125 12.0 6 100 1.225 1.102 0.490 3
NOSY107M006#0400 Y 100 6.3 85 3 125 12.0 6 400 0.612 0.551 0.245 3
NOSD157M006#0050 D 150 6.3 85 3 125 18.0 6 50 1.897 1.708 0.759 3
NOSD157M006#0070 D 150 6.3 85 3 125 18.0 6 70 1.604 1.443 0.641 3
NOSD157M006#0100 D 150 6.3 85 3 125 18.0 6 100 1.342 1.207 0.537 3
NOSD157M006#0400 D 150 6.3 85 3 125 18.0 6 400 0.671 0.604 0.268 3
NOSY157M006#0100 Y 150 6.3 85 3 125 18.0 6 100 1.225 1.102 0.490 3
NOSY157M006#0400 Y 150 6.3 85 3 125 18.0 6 400 0.612 0.551 0.245 3
NOSD227M006#0045 D 220 6.3 85 3 125 26.4 8 45 2.000 1.800 0.800 3
NOSD227M006#0060 D 220 6.3 85 3 125 26.4 8 60 1.732 1.559 0.693 3
NOSD227M006#0100 D 220 6.3 85 3 125 26.4 8 100 1.342 1.207 0.537 3
NOSD227M006#0400 D 220 6.3 85 3 125 26.4 8 400 0.671 0.604 0.268 3
NOSE227M006#0080 E 220 6.3 85 3 125 26.4 12 80 1.573 1.416 0.629 3
NOSE227M006#0100 E 220 6.3 85 3 125 26.4 12 100 1.407 1.266 0.563 3
NOSE227M006#0400 E 220 6.3 85 3 125 26.4 12 400 0.704 0.633 0.281 3
040320


Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
NOSE337M006#0080 E 330 6.3 85 3 125 39.6 12 80 1.573 1.416 0.629 3
NOSE337M006#0100 E 330 6.3 85 3 125 39.6 12 100 1.407 1.266 0.563 3
NOSE337M006#0300 E 330 6.3 85 3 125 39.6 12 300 0.812 0.731 0.325 3
NOSV477M006#0075 V 470 6.3 85 3 125 56.4 14 75 2.000 1.800 0.800 3
NOSV477M006#0300 V 470 6.3 85 3 125 56.4 14 300 1.000 0.900 0.400 3
8 Volt @ 85°C
NOSA106M008#2200 A 10 8 85 4 125 1.6 10 2200 0.202 0.182 0.081 1
NOSB106M008#1000 B 10 8 85 4 125 1.6 10 1000 0.319 0.287 0.128 1
NOSB156M008#1000 B 15 8 85 4 125 2.4 10 1000 0.319 0.287 0.128 1
NOSB226M008#0700 B 22 8 85 4 125 3.5 10 700 0.382 0.344 0.153 1
NOSB226M008#1800 B 22 8 85 4 125 3.5 10 1800 0.238 0.214 0.095 1
NOSC226M008#0500 C 22 8 85 4 125 3.5 10 500 0.514 0.462 0.206 1
NOSC336M008#0500 C 33 8 85 4 125 5.3 10 500 0.514 0.462 0.206 1
NOSC476M008#0400 C 47 8 85 4 125 7.5 10 400 0.574 0.517 0.230 1
NOSC686M008#0500 C 68 8 85 4 125 11.0 16 500 0.514 0.462 0.206 1
NOSD107M008#0400 D 100 8 85 4 125 16.0 16 400 0.671 0.604 0.268 3
Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at
120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. The EIA & CECC standards for capacitors allow an ESR movement
to 1.25 times catalog limit post mounting. For typical weight and composition see page 259.
040320

QUALIFICATION TABLE
NOS series (Temperature range -55ºC to +125ºC)
TEST
1 +20 15
2 -55 15
DCL IL* n/a IL* 12 x IL* 15 x IL* IL*
Stability 4 +85 15
5 +125 15
6 +20 15 ESR 1.25xIL* 2.5xIL* 1.25xIL* 1.25xIL* 1.25xIL* 1.25xIL*

DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
040320

122920

NOM Series – Multianode Ultra-Low ESR OxiCap®
OxiCap® NOM Low ESR Multianodes

FEATURES
• Multi-anode Construction
• Super Low ESR
• Non-Burn Safe Technology LEAD-FREE COMPATIBLE
• CV Range: 220-680μF / 1.8-6.3V COMPONENT
• IBM Global Approval Received in 2004
• Elektra Award Received in 2005
APPLICATIONS Elektra Award

• High Power Low Voltage Industrial 2005
Power Supplies
L W
NON-BURN
NON-SMOKE
A S A W1 NOM MULTIANODE
CONSTRUCTION
MARKING
E CASE
OxiCap® LOGO Capacitance Value in pF
227 = 220µF
Polarity
Band 227 G Rated Voltage
EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1 ±0.20 A+0.30 (0.012)
(Anode+) G = 4V
Code S Min.
XXXXX ID Code Code Metric (0.008) –0.10 (0.004) –0.10 (0.004) (0.008) –0.20 (0.008)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
HOW TO ORDER
NOM E 227 M 006 R 0040
Type Case Size Capacitance Code Tolerance Rated Packaging ESR in mΩ

See table 1st two digits represent M = ±20% DC Voltage R = Pure Tin 7" Reel
above significant figures, 001 = 1.8Vdc S = Pure Tin 13" Reel
3rd digit represents 002 = 2.5Vdc
multiplier in pF 004 = 4Vdc
006 = 6.3Vdc
Rated Voltage DC (VR) ≤ +85°C: 1.8 2.5 4 6.3
Category Voltage (VC) ≤ +125ºC: 0.9 1.3 2 3
Surge Voltage (VS) ≤ +85ºC: 2.3 3.3 5.2 8
Surge Voltage (VS) ≤ +125ºC: 1.2 1.7 2.6 4
102220


μF Code 1.8V (x) 2.5V (e) 4.0V (G) 6.3V (J)
220 227 E(40)
330 337 E(35) E(23,35)
470 477 E(30) E(23,30)
680 687 E(23) E(23)


ESR
Size (μF) @ 100kHz
(V) (ºC) (V) (ºC) (μA) (%) 25ºC 85ºC 125ºC
(mΩ)
1.8 Volt @ 85°C
NOME687M001#0023 E 680 1.8 85 0.9 125 24.5 6 23 3.753 3.378 1.501 3
2.5 Volt @ 85°C
NOME477M002#0030 E 470 2.5 85 1.3 125 23.5 10 30 3.286 2.958 1.315 3
NOME687M002#0023 E 680 2.5 85 1.3 125 34 6 23 3.753 3.378 1.501 3
4 Volt @ 85°C
NOME337M004#0035 E 330 4 85 2 125 26.4 8 35 3.043 2.738 1.217 3
NOME477M004#0023 E 470 4 85 2 125 37.6 6 23 3.753 3.378 1.501 3
NOME477M004#0030 E 470 4 85 2 125 37.6 6 30 3.286 2.958 1.315 3
6.3 Volt @ 85°C
NOME227M006#0040 E 220 6.3 85 3 125 26.4 12 40 2.846 2.561 1.138 3
NOME337M006#0023 E 330 6.3 85 3 125 39.6 6 23 3.753 3.378 1.501 3
NOME337M006#0035 E 330 6.3 85 3 125 39.6 6 35 3.043 2.738 1.217 3

ESR allowed to move up to 125 times catalog limit post mounting.
081821

QUALIFICATION TABLE
NOM series (Temperature range -55ºC to +125ºC)
TEST
1 +20 15
2 -55 15 DCL IL* n/a IL* 12 x IL* 15 x IL* IL*
Stability 4 +85 15
5 +125 15
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
072121

122920

SECTION 2: SOLID CONDUCTIVE POLYMER
ELECTROLYTIC CHIP CAPACITORS
TCJ Series TCJ Series – Standard and Low Profile - J-Lead
Conductive Polymer Solid Electrolytic Chip Capacitors
FEATURES
• Conductive Polymer Electrode
• Benign Failure Mode Under Recommended Use Conditions
• Lower ESR
• 3x Reflow 260°C Compatible LEAD-FREE COMPATIBLE
COMPONENT
• CV Range: 0.47-470μF / 2.5-125V
APPLICATIONS
• Smart Phone, Tablets, Notebook, LCD TV, Power Supplies Elektra Award 2010

EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1 ±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) –0.10 (0.004) –0.10 (0.004) (0.008) –0.20 (0.008)
A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
MARKING
AVX LOGO
Polymer Capacitance Value in pF
156 = 15µF
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
A, Polarity
B, C, D,
Band E, H,156
AVX LOGO
Polymer
K,Capacitance
S,
J T, ValueRated Voltage
J =in6.3V
pF
H 1210 3528-15 3.50 (0.138) 2.80 (0.110) 1.50 (0.059) max 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
U, (Anode+)
W, X, Y, 5 CASE XXXXX
337 = 330µF ID Code
K 1206 3216-10 3.20 (0.126) 1.60 (0.063) 1.00 (0.039) max 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
Polarity
Band 337 A Rated Voltage
(Anode+)
A = 10V
S 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) max 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
XXXXX
Polymer LOGO ID Code Value in pF
Capacitance
476 = 47µF T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) max 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
U 2924 7361-43 7.30 (0.287) 6.10 (0.240) 4.10 (0.162) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
Polarity
Band 476 E Rated Voltage
E = 25V
(Anode+) W 2312 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) max 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
XXXXX ID Code
X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) max 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
N, P, R CASE
Capacitance Value in pF 5 2917 7343-40 7.30 (0.287) 4.30 (0.169) 3.80 (0.150) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
106 = 10µF
Polarity
Band 106
(Anode+)
J = 6.3V
HOW TO ORDER AVX LOGO

Polymer
TCJ A 226 M 004 R 0300 E
Type Case Capacitance Code Tolerance Rated Packaging ESR in mΩ Additional

Size pF code: 1st two digits M = ±20% DC Voltage R = Pure Tin 7" Reel Character
See table represent significant figures, 002 = 2.5Vdc 035 = 35Vdc S = Pure Tin 13" Reel E = Black resin
above 3rd digit represents multiplier 004 = 4Vdc 050 = 50Vdc (It is possible to order
(number of zeros to follow) 006 = 6.3Vdc 063 = 63Vdc PN without "E" as
010 = 10Vdc 075 = 75Vdc identical product)
016 = 16Vdc 100 = 100Vdc
020 = 20Vdc 125 = 125Vdc
025 = 25Vdc
TECHNICAL SPECIFICATIONS (COMMON FOR ALL TCJ SERIES)

Resistance to soldering heat: 3x260°C peak for max. 10s reflow
NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum
temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified
environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature
within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current
and current surges. Please reference the KYOCERA AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance.
031722

TCJ Series
Cap Rated Voltage DC (VR) to 85°C
100V 125V
μF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T) 63V (J) 75V (P)
(A) (B)
0.47 474 B(400)
0.68 684 B(400) B(300)
B(300)
1.0 105 B(300)
C(300)
B(300)
1.5 155 B(200)
C(300)
C(300)
B(300)
2.2 225 B(200)
C(300)
C(200)
A(500) B(300)
3.3 335 B(200) C(200)
C(200) D(250)
C(200)
A(500) B(150,200) C(200)
4.7 475 K(300,500)
B(100,150) C(200)
X(250)
D(120)
D(150) D(250)
Y(250)
A(150)
C(200) D(120)
6.8 685 A(200) B(90,150) C(200)
D(120) E(100,150)
D(120)
T(100,150)
A(200) B(200)
A(150) A(150) D(90,120)
10 106 A(300) A(200,300) B(100,200)
B(150) B(90,100,150)
C(200)
E(70,100)
E(100,150)
T(100,150,200) Y(70)
B(200)
B(100,150) C(200) D(150)
15 156 A(300) A(300) A(200) B(90,150) B(150)
Y(90) D(70,100) E(70,100)
E(150)
Y(70,100)
B(100,150)
B(90,150) D(90),
A(300), B(70), K(400) B(70,300) A(300) C(100) D(70,100)
22 226 A(300)
S(400),T(150) T(70,150) B(70,150)
X(100)
D(60,100) Y(150)
E(75),
Y(70) E(150)
X(100), Y(70)
D(70,100)
A(200) B(70,200) A(200),B(150) D(60,100)
X(100) E(55,70)
33 336 A(300) B(70,200) C(100) H(150)
Y(70)
X(70,100)
U(70)
T(150) T(70,150) Y(45,60,70) Y(60,70,100)
Y(100)
D(45,70),
A(70,100,200) B(70) D(55), D(60,100) E(55)
A(200) H(150)
47 476 T(80)
B(55,70) C(100)
X(45,70)
X(55,70) E(50) U(70)
T(55,70,80,120) H(100) Y(70) Y(100) Y(100)
Y(45,70)
A(250) B(55,70) D(55) D(70)

D(45,55) D(50)
68 686 A(250) B(70) C(55,100), H(100)
Y(45,55) Y(50)
E(45) E(50)
T(80) T(200), W(70) Y(50) Y(100)
A(100,150) C(70)
A(200) D(50) D(55,70)
A(200) B(40,45,55,70) D(18,25,45,55,80) D(55)
100 107 B(55,70)
B(40,70)
C(70,100) Y(18,25,45,55)
E(40)
E(45)
E(80)
T(70,150) Y(50) U(70)
T(200), W(70) Y(55)
B(35,45,55,70) C(70)
B(70)
D(12,15,25,40) D(25,40,45,55) D(40,50,70)
150 157 B(70) D(15)
H(70,200),W(70) Y(25,40,45,55) E(25,40)
U(70) U(100)
Y(15,25,45)
Y(15,25,40) Y(40,50,70)
B(70,200)
B(35,45,60,70)
D(12,15,25,35,40,50) D(15,25,40,50) D(35,50)
220 227 B(35,45,70) D(12,15,25,40)
H(170) Y(15,25,40,50) E(50)
U(70)
Y(15,25,40)
Y(15,18,25,35,40,50)
B(35,45,70,Y) D(15,25,40,50) D(12,15,18,25,40,50) D(25) E(35, 50,70)
330 337 (25,40) Y(15,25,40,50) Y(15,25,40,50) 5(35,100) 5(100)
D(12,15,25,40,50) D(12,15,25,40,50) D(25,45)
470 477 Y(15,25,40,50) Y(15,25,40,50) X(35,50,100)
5(100)

053122

TCJ Series
Maximum 100kHz RMS Current (mA)
Rated ESR Max.
Case Capacitance Operating DCL Max. DF Max. Product
Part Number Voltage @ 100kHz MSL
Size (μF) Temperature (μA) (%) 45ºC 85ºC 105ºC 125ºC Category
(V) (mΩ)
(ºC)
2.5 Volt @ 85°C
TCJA686M002#0250E A 68 2.5 105 17 6 250 600 400 300 – 3 3
TCJA107M002#0200E A 100 2.5 105 25 6 200 700 500 300 – 3 3
TCJB107M002#0055E B 100 2.5 125 25 6 55 1500 1100 700 400 0 3
TCJB107M002#0070E B 100 2.5 125 25 6 70 1300 900 600 300 1 3
TCJB157M002#0070E B 150 2.5 105 37.5 6 70 1300 900 600 – 3 3
TCJB227M002#0035E B 220 2.5 105 55 8 35 1900 1300 900 – 3 3
TCJB227M002#0045E B 220 2.5 105 55 8 45 1700 1200 800 – 3 3
TCJB227M002#0070E B 220 2.5 105 55 8 70 1300 900 600 – 3 3
TCJB337M002#0035E B 330 2.5 105 82.5 8 35 1900 1300 900 – 3 3
TCJB337M002#0045E B 330 2.5 105 82.5 8 45 1700 1200 800 – 3 3
TCJB337M002#0070E B 330 2.5 105 82.5 8 70 1300 900 600 – 3 3
TCJY337M002#0025E Y 330 2.5 105 82.5 6 25 2700 1900 1200 – 2 3
TCJY337M002#0040E Y 330 2.5 105 82.5 6 40 2200 1500 1000 – 3 3
TCJD477M002#0012E D 470 2.5 105 117.5 6 12 4300 3000 1900 – 2 3
TCJD477M002#0015E D 470 2.5 105 117.5 6 15 3900 2700 1800 – 2 3
TCJD477M002#0025E D 470 2.5 105 117.5 6 25 3000 2100 1400 – 2 3
TCJD477M002#0040E D 470 2.5 105 117.5 6 40 2400 1700 1100 – 3 3
TCJD477M002#0050E D 470 2.5 105 117.5 6 50 2100 1500 900 – 3 3
TCJY477M002#0015E Y 470 2.5 85 117.5 6 15 3500 2500 – – 5 3
TCJY477M002#0025E Y 470 2.5 105 117.5 6 25 2700 1900 1200 – 3 3
TCJY477M002#0040E Y 470 2.5 105 117.5 6 40 2200 1500 1000 – 3 3
TCJY477M002#0050E Y 470 2.5 105 117.5 6 50 1900 1300 900 – 3 3
4 Volt @ 85°C
TCJA156M004#0300E A 15 4 125 6 6 300 600 400 300 200 1 3
TCJA226M004#0300E A 22 4 125 8.8 6 300 600 400 300 200 1 3
TCJA336M004#0300E A 33 4 125 13.2 6 300 600 400 300 200 1 3
TCJA476M004#0200E A 47 4 105 18.8 6 200 700 500 300 – 3 3
TCJT476M004#0080E T 47 4 105 18.8 8 80 1100 800 500 – 3 3
TCJA686M004#0250E A 68 4 105 27.2 6 250 600 400 300 – 3 3
TCJB686M004#0070E B 68 4 125 27.2 6 70 1300 900 600 300 1 3
TCJT686M004#0080E T 68 4 105 27.2 8 80 1100 800 500 – 3 3
TCJA107M004#0200E A 100 4 105 40 6 200 700 500 300 – 3 3
TCJB107M004#0040E B 100 4 105 40 8 40 1800 1300 800 – 3 3
TCJB107M004#0070E B 100 4 125 40 8 70 1300 900 600 300 0 3
TCJT107M004#0070E T 100 4 105 40 8 70 1200 800 500 – 3 3
TCJT107M004#0150E T 100 4 105 40 8 150 800 600 400 – 3 3
TCJB157M004#0070E B 150 4 105 60 6 70 1300 900 600 – 3 3
TCJD157M004#0015E D 150 4 105 60 6 15 3900 2700 1800 – 2 3
TCJY157M004#0015E Y 150 4 105 60 6 15 3500 2500 1600 – 2 3
TCJY157M004#0025E Y 150 4 105 60 6 25 2700 1900 1200 – 2 3
TCJY157M004#0045E Y 150 4 105 60 6 45 2000 1400 900 – 3 3
TCJB227M004#0035E B 220 4 105 88 10 35 1900 1300 900 – 3 3
TCJB227M004#0045E B 220 4 105 88 10 45 1700 1200 800 – 3 3
TCJB227M004#0060E B 220 4 105 88 10 60 1400 1000 600 – 3 3
TCJB227M004#0070E B 220 4 105 88 10 70 1300 900 600 – 3 3
TCJD227M004#0012E D 220 4 105 88 6 12 4300 3000 1900 – 2 3
TCJD227M004#0015E D 220 4 105 88 6 15 3900 2700 1800 – 2 3
TCJD227M004#0025E D 220 4 105 88 6 25 3000 2100 1400 – 2 3
TCJD227M004#0040E D 220 4 105 88 6 40 2400 1700 1100 – 2 3
TCJY227M004#0015E Y 220 4 105 88 6 15 3500 2500 1600 – 2 3
TCJY227M004#0025E Y 220 4 105 88 6 25 2700 1900 1200 – 2 3
TCJY227M004#0040E Y 220 4 105 88 6 40 2200 1500 1000 – 3 3
TCJD337M004#0015E D 330 4 105 132 6 15 3900 2700 1800 – 2 3
TCJD337M004#0025E D 330 4 105 132 6 25 3000 2100 1400 – 2 3
TCJD337M004#0040E D 330 4 105 132 6 40 2400 1700 1100 – 3 3
TCJD337M004#0050E D 330 4 105 132 6 50 2100 1500 900 – 3 3
TCJY337M004#0015E Y 330 4 85 132 6 15 3500 2500 – – 5 3
TCJY337M004#0025E Y 330 4 105 132 6 25 2700 1900 1200 – 3 3
TCJY337M004#0040E Y 330 4 105 132 6 40 2200 1500 1000 – 3 3
TCJY337M004#0050E Y 330 4 105 132 6 50 1900 1300 900 – 3 3
TCJD477M004#0012E D 470 4 105 188 6 12 4300 3000 1900 – 2 3
TCJD477M004#0015E D 470 4 105 188 6 15 3900 2700 1800 – 2 3
TCJD477M004#0025E D 470 4 105 188 6 25 3000 2100 1400 – 2 3
TCJD477M004#0040E D 470 4 105 188 6 40 2400 1700 1100 – 2 3
TCJD477M004#0050E D 470 4 105 188 6 50 2100 1500 900 – 2 3
TCJY477M004#0015E Y 470 4 85 188 6 15 3500 2500 – – 5 3
TCJY477M004#0025E Y 470 4 105 188 6 25 2700 1900 1200 – 3 3
TCJY477M004#0040E Y 470 4 105 188 6 40 2200 1500 1000 – 3 3
TCJY477M004#0050E Y 470 4 105 188 6 50 1900 1300 900 – 3 3
031722

TCJ Series
Rated ESR Max.
(V) (mΩ)
(ºC)
6.3 Volt @ 85°C
TCJA106M006#0300E A 10 6.3 125 6 6 300 600 400 300 200 1 3
TCJA156M006#0300E A 15 6.3 125 9 6 300 600 400 300 200 1 3
TCJA226M006#0300E A 22 6.3 125 13.2 6 300 600 400 300 200 1 3
TCJB226M006#0070E B 22 6.3 125 13.2 6 70 1300 900 600 300 0 3
TCJK226M006#0400E K 22 6.3 105 13.2 8 400 500 400 200 – 3 3
TCJS226M006#0400E S 22 6.3 105 13.2 8 400 500 400 200 – 3 3
TCJT226M006#0150E T 22 6.3 105 13.2 6 150 800 600 400 – 3 3
TCJA336M006#0200E A 33 6.3 105 19.8 6 200 700 500 300 – 3 3
TCJB336M006#0070E B 33 6.3 125 19.8 6 70 1300 900 600 300 0 3
TCJB336M006#0200E B 33 6.3 125 19.8 6 200 800 600 400 200 0 3
TCJT336M006#0150E T 33 6.3 105 19.8 8 150 800 600 400 – 3 3
TCJA476M006#0070E A 47 6.3 105 28.2 6 70 1200 800 500 – 3 3
TCJA476M006#0100E A 47 6.3 105 28.2 6 100 1000 700 500 – 3 3
TCJA476M006#0200E A 47 6.3 105 28.2 6 200 700 500 300 – 3 3
TCJB476M006#0055E B 47 6.3 105 28.2 6 55 1500 1100 700 – 2 3
TCJB476M006#0070E B 47 6.3 125 28.2 6 70 1300 900 600 300 1 3
TCJT476M006#0055E T 47 6.3 105 28.2 8 55 1300 900 600 – 3 3
TCJT476M006#0070E T 47 6.3 105 28.2 8 70 1200 800 500 – 3 3
TCJT476M006#0080E T 47 6.3 105 28.2 8 80 1100 800 500 – 3 3
TCJT476M006#0120E T 47 6.3 105 28.2 8 120 900 600 400 – 3 3
TCJB686M006#0055E B 68 6.3 125 40.8 8 55 1500 1100 700 400 1 3
TCJB686M006#0070E B 68 6.3 125 40.8 8 70 1300 900 600 300 1 3
TCJC686M006#0055E C 68 6.3 125 40.8 6 55 1800 1300 800 500 1 3
TCJC686M006#0100E C 68 6.3 125 40.8 6 100 1300 900 600 300 1 3
TCJH686M006#0100E H 68 6.3 105 40.8 6 100 1000 700 500 – 3 3
TCJT686M006#0200E T 68 6.3 105 40.8 8 200 700 500 300 – 3 3
TCJW686M006#0070E W 68 6.3 125 40.8 8 70 1400 1000 600 400 1 3
TCJA107M006#0100E A 100 6.3 105 60 10 100 1000 700 500 – 3 3
TCJA107M006#0150E A 100 6.3 105 60 10 150 800 600 400 – 3 3
TCJB107M006#0040E B 100 6.3 105 60 10 40 1800 1300 800 – 3 3
TCJB107M006#0045E B 100 6.3 105 60 10 45 1700 1200 800 – 3 3
TCJB107M006#0055E B 100 6.3 105 60 10 55 1500 1100 700 – 3 3
TCJB107M006#0070E B 100 6.3 105 60 10 70 1300 900 600 – 3 3
TCJC107M006#0070E C 100 6.3 105 60 6 70 1600 1100 700 – 3 3
TCJC107M006#0100E C 100 6.3 105 60 6 100 1300 900 600 – 3 3
TCJT107M006#0200E T 100 6.3 105 60 10 200 700 500 300 – 3 3
TCJW107M006#0070E W 100 6.3 105 60 6 70 1400 1000 600 – 3 3
TCJB157M006#0035E B 150 6.3 105 90 10 35 1900 1300 900 – 3 3
TCJB157M006#0045E B 150 6.3 105 90 10 45 1700 1200 800 – 3 3
TCJB157M006#0055E B 150 6.3 105 90 10 55 1500 1100 700 – 3 3
TCJB157M006#0070E B 150 6.3 105 90 10 70 1300 900 600 – 3 3
TCJD157M006#0012E D 150 6.3 105 90 6 12 4300 3000 1900 – 2 3
TCJD157M006#0015E D 150 6.3 105 90 6 15 3900 2700 1800 – 2 3
TCJD157M006#0025E D 150 6.3 105 90 6 25 3000 2100 1400 – 2 3
TCJD157M006#0040E D 150 6.3 105 90 6 40 2400 1700 1100 – 2 3
TCJH157M006#0070E H 150 6.3 105 90 6 70 1200 800 500 - 3 3
TCJH157M006#0200E H 150 6.3 105 90 6 200 700 500 300 – 3 3
TCJW157M006#0070E W 150 6.3 105 90 6 70 1400 1000 600 – 3 3
TCJY157M006#0015E Y 150 6.3 105 90 6 15 3500 2500 1600 – 2 3
TCJY157M006#0025E Y 150 6.3 105 90 6 25 2700 1900 1200 – 2 3
TCJY157M006#0040E Y 150 6.3 105 90 6 40 2200 1500 1000 – 3 3
TCJB227M006#0070E B 220 6.3 105 132 10 70 1300 900 600 – 3 3
TCJB227M006#0200E B 220 6.3 105 132 10 200 800 600 400 – 3 3
TCJD227M006#0012E D 220 6.3 105 132 6 12 4300 3000 1900 – 2 3
TCJD227M006#0015E D 220 6.3 105 132 6 15 3900 2700 1800 – 2 3
TCJD227M006#0025E D 220 6.3 105 132 6 25 3000 2100 1400 – 2 3
TCJD227M006#0035E D 220 6.3 105 132 6 35 2500 1800 1100 – 3 3
TCJD227M006#0040E D 220 6.3 105 132 6 40 2400 1700 1100 – 3 3
TCJD227M006#0050E D 220 6.3 105 132 6 50 2100 1500 900 – 3 3
TCJH227M006#0170E H 220 6.3 105 132 10 170 800 600 400 – 3 3
TCJY227M006#0015E Y 220 6.3 85 132 6 15 3500 2500 – – 5 3
TCJY227M006#0018E Y 220 6.3 105 132 6 18 3200 2200 1400 – 3 3
TCJY227M006#0025E Y 220 6.3 105 132 6 25 2700 1900 1200 – 2 3
TCJY227M006#0035E Y 220 6.3 105 132 6 35 2300 1600 1000 – 2 3
TCJY227M006#0040E Y 220 6.3 105 132 6 40 2200 1500 1000 – 2 3
TCJY227M006#0050E Y 220 6.3 105 132 6 50 1900 1300 900 – 2 3
TCJD337M006#0012E D 330 6.3 105 198 6 12 4300 3000 1900 – 3 3
TCJD337M006#0015E D 330 6.3 105 198 6 15 3900 2700 1800 – 3 3
TCJD337M006#0018E D 330 6.3 105 198 6 18 3500 2500 1600 – 3 3
031722

TCJ Series
Rated ESR Max.
(V) (mΩ)
(ºC)
TCJD337M006#0025E D 330 6.3 105 198 6 25 3000 2100 1400 – 3 3
TCJD337M006#0040E D 330 6.3 105 198 6 40 2400 1700 1100 – 2 3
TCJD337M006#0050E D 330 6.3 105 198 6 50 2100 1500 900 – 2 3
TCJY337M006#0015E Y 330 6.3 85 198 12 15 3500 2500 – – 5 3
TCJY337M006#0025E Y 330 6.3 105 198 10 25 2700 1900 1200 – 3 3
TCJY337M006#0040E Y 330 6.3 105 198 12 40 2200 1500 1000 – 3 3
TCJY337M006#0050E Y 330 6.3 105 198 12 50 1900 1300 900 – 3 3
TCJD477M006#0025E D 470 6.3 105 282 6 25 3000 2100 1400 – 2 3
TCJD477M006#0045E D 470 6.3 105 282 6 45 2200 1500 1000 - 2 3
TCJX477M006#0035E X 470 6.3 105 282 6 35 2200 1500 1000 – 3 3
TCJX477M006#0050E X 470 6.3 105 282 6 50 1900 1300 900 – 3 3
TCJX477M006#0100E X 470 6.3 105 282 6 100 1300 900 600 – 3 3
10 Volt @ 85°C
TCJK475M010#0300E K 4.7 10 105 4.7 6 300 500 400 200 – 3 3
TCJK475M010#0500E K 4.7 10 105 4.7 6 500 400 300 200 – 3 3
TCJA106M010#0200E A 10 10 125 10 6 200 700 500 300 200 1 3
TCJA106M010#0300E A 10 10 125 10 6 300 600 400 300 200 1 3
TCJA156M010#0200E A 15 10 125 15 6 200 700 500 300 200 1 3
TCJB226M010#0070E B 22 10 125 22 6 70 1300 900 600 300 0 3
TCJB226M010#0300E B 22 10 125 22 6 300 600 400 300 200 0 3
TCJT226M010#0070E T 22 10 105 22 6 70 1200 800 500 – 3 3
TCJT226M010#0150E T 22 10 105 22 6 150 800 600 400 – 3 3
TCJB336M010#0070E B 33 10 125 33 6 70 1300 900 600 300 0 3
TCJB336M010#0200E B 33 10 125 33 6 200 800 600 400 200 0 3
TCJC336M010#0100E C 33 10 125 33 6 100 1300 900 600 300 1 3
TCJT336M010#0070E T 33 10 105 33 6 70 1200 800 500 – 3 3
TCJT336M010#0150E T 33 10 105 33 6 150 800 600 400 – 3 3
TCJB476M010#0070E B 47 10 105 47 6 70 1300 900 600 – 3 3
TCJC476M010#0100E C 47 10 125 47 6 100 1300 900 600 300 1 3
TCJH476M010#0100E H 47 10 105 47 6 100 1000 700 500 – 3 3
TCJD686M010#0045E D 68 10 125 68 6 45 2200 1500 1000 600 0 3
TCJD686M010#0055E D 68 10 125 68 6 55 2000 1400 900 500 0 3
TCJY686M010#0045E Y 68 10 105 68 6 45 2000 1400 900 – 3 3
TCJY686M010#0055E Y 68 10 105 68 6 55 1800 1300 800 – 3 3
TCJD107M010#0018E D 100 10 105 100 6 18 3500 2500 1600 – 2 3
TCJD107M010#0025E D 100 10 105 100 6 25 3000 2100 1400 – 2 3
TCJD107M010#0045E D 100 10 105 100 6 45 2200 1500 1000 – 3 3
TCJD107M010#0055E D 100 10 105 100 6 55 2000 1400 900 – 3 3
TCJD107M010#0080E D 100 10 105 100 6 80 1700 1200 800 – 3 3
TCJY107M010#0018E Y 100 10 105 100 6 18 3200 2200 1400 – 2 3
TCJY107M010#0025E Y 100 10 105 100 6 25 2700 1900 1200 – 2 3
TCJY107M010#0045E Y 100 10 105 100 6 45 2000 1400 900 – 3 3
TCJY107M010#0055E Y 100 10 105 100 6 55 1800 1300 800 – 3 3
TCJD157M010#0025E D 150 10 105 150 6 25 3000 2100 1400 – 3 3
TCJD157M010#0040E D 150 10 105 150 6 40 2400 1700 1100 – 3 3
TCJD157M010#0045E D 150 10 105 150 6 45 2200 1500 1000 – 3 3
TCJD157M010#0055E D 150 10 105 150 6 55 2000 1400 900 – 3 3
TCJY157M010#0025E Y 150 10 105 150 6 25 2700 1900 1200 – 3 3
TCJY157M010#0040E Y 150 10 105 150 6 40 2200 1500 1000 – 3 3
TCJY157M010#0045E Y 150 10 105 150 6 45 2000 1400 900 – 3 3
TCJY157M010#0055E Y 150 10 105 150 6 55 1800 1300 800 – 3 3
TCJD227M010#0015E D 220 10 105 220 6 15 3900 2700 1800 – 3 3
TCJD227M010#0025E D 220 10 105 220 6 25 3000 2100 1400 – 3 3
TCJD227M010#0040E D 220 10 105 220 6 40 2400 1700 1100 – 3 3
TCJD227M010#0050E D 220 10 105 220 6 50 2100 1500 900 – 3 3
TCJY227M010#0015E Y 220 10 85 220 6 15 3500 2500 – – 5 3
TCJY227M010#0025E Y 220 10 105 220 6 25 2700 1900 1200 – 3 3
TCJY227M010#0040E Y 220 10 105 220 6 40 2200 1500 1000 – 3 3
TCJY227M010#0050E Y 220 10 105 220 6 50 1900 1300 900 – 3 3
TCJD337M010#0025E D 330 10 105 330 6 25 3000 2100 1400 – 2 3
TCJ5337M010#0035E 5 330 10 105 330 10 35 2600 1800 1200 – 2 3
TCJ5337M010#0100E 5 330 10 105 330 10 100 1500 1100 700 – 2 3
16 Volt @ 85°C
TCJA685M016#0200E A 6.8 16 125 10.9 6 200 700 500 300 200 1 3
TCJA106M016#0200E A 10 16 125 16 6 200 700 500 300 200 1 3
TCJB106M016#0100E B 10 16 125 16 6 100 1100 800 500 300 1 3
TCJB106M016#0200E B 10 16 125 16 6 200 800 600 400 200 1 3
TCJT106M016#0100E T 10 16 125 16 6 100 1000 700 500 300 1 3
111521

TCJ Series
Rated ESR Max.
(V) (mΩ)
(ºC)
TCJT106M016#0150E T 10 16 125 16 6 150 800 600 400 200 1 3
TCJT106M016#0200E T 10 16 125 16 6 200 700 500 300 200 1 3
TCJB156M016#0090E B 15 16 125 24 6 90 1200 800 500 300 0 3
TCJB156M016#0150E B 15 16 125 24 6 150 900 600 400 200 0 3
TCJA226M016#0300E A 22 16 105 35.2 10 300 600 400 300 – 3 3
TCJB226M016#0070E B 22 16 125 35.2 8 70 1300 900 600 300 0 3
TCJB226M016#0150E B 22 16 125 35.2 6 150 900 600 400 200 0 3
TCJA336M016#0200E A 33 16 105 52.8 10 200 700 500 300 – 3 3
TCJB336M016#0150E B 33 16 125 52.8 8 150 900 600 400 200 0 3
TCJH336M016#0150E H 33 16 105 52.8 6 150 800 600 400 – 3 3
TCJY336M016#0045E Y 33 16 105 52.8 6 45 2000 1400 900 – 2 3
TCJY336M016#0060E Y 33 16 105 52.8 6 60 1800 1300 800 – 2 3
TCJY336M016#0070E Y 33 16 105 52.8 6 70 1600 1100 700 – 2 3
TCJD476M016#0045E D 47 16 125 75.2 6 45 2200 1500 1000 600 0 3
TCJD476M016#0070E D 47 16 125 75.2 6 70 1800 1300 800 500 0 3
TCJH476M016#0150E H 47 16 105 75.2 6 150 800 600 400 – 3 4
TCJX476M016#0045E X 47 16 105 75.2 6 45 2000 1400 900 – 2 3
TCJX476M016#0070E X 47 16 105 75.2 6 70 1600 1100 700 – 2 3
TCJY476M016#0045E Y 47 16 105 75.2 6 45 2000 1400 900 – 2 3
TCJY476M016#0070E Y 47 16 105 75.2 6 70 1600 1100 700 – 2 3
TCJD686M016#0050E D 68 16 105 108.8 6 50 2100 1500 900 – 2 3
TCJY686M016#0050E Y 68 16 105 108.8 6 50 1900 1300 900 – 2 3
TCJD107M016#0050E D 100 16 105 160 6 50 2100 1500 900 – 2 3
TCJE107M016#0040E E 100 16 105 160 6 40 2500 1800 1100 – 2 3
TCJY107M016#0050E Y 100 16 105 160 6 50 1900 1300 900 – 2 3
TCJC157M016#0070E C 150 16 125 240 10 70 1600 1100 700 400 0 3
TCJD157M016#0040E D 150 16 85 240 6 40 2400 1700 – – 5 3
TCJD157M016#0050E D 150 16 85 240 6 50 2100 1500 – – 5 3
TCJD157M016#0070E D 150 16 105 240 6 70 1800 1300 800 – 3 3
TCJE157M016#0025E E 150 16 125 240 8 25 3200 2200 1400 800 0 3
TCJE157M016#0040E E 150 16 125 240 10 40 2500 1800 1100 600 0 3
TCJY157M016#0040E Y 150 16 105 240 6 40 2200 1500 1000 – 3 3
TCJY157M016#0050E Y 150 16 105 240 6 50 1900 1300 900 – 3 3
TCJY157M016#0070E Y 150 16 105 240 6 70 1600 1100 700 – 3 3
TCJD227M016#0035E D 220 16 105 352 10 35 2500 1800 1100 – 2 3
TCJD227M016#0050E D 220 16 105 352 10 50 2100 1500 900 – 2 3
TCJE227M016#0050E E 220 16 125 352 10 50 2200 1500 1000 600 0 3
TCJE337M016#0035E E 330 16 105 528 10 35 2700 1900 1200 – 2 3
TCJE337M016#0050E E 330 16 105 528 10 50 2200 1500 1000 – 2 3
TCJE337M016#0070E E 330 16 105 528 10 70 1900 1300 900 – 2 3
TCJ5337M016#0100E 5 330 16 105 528 10 100 1500 1100 700 – 2 3
TCJ5477M016R0100E 5 470 16 105 752 10 100 1500 1100 700 – 3 3
20 Volt @ 85°C
TCJA106M020#0150E A 10 20 105 20 6 150 800 600 400 – 3 3
TCJB106M020#0150E B 10 20 125 20 8 150 900 600 400 200 0 3
TCJB156M020#0150E B 15 20 125 30 8 150 900 600 400 200 0 3
TCJB226M020#0090E B 22 20 105 44 6 90 1200 800 500 – 3 3
TCJB226M020#0150E B 22 20 105 44 6 150 900 600 400 – 3 3
TCJX226M020#0100E X 22 20 105 44 8 100 1300 900 600 – 2 3
TCJY226M020#0070E Y 22 20 105 44 6 70 1600 1100 700 – 2 3
TCJX336M020#0100E X 33 20 105 66 6 100 1300 900 600 – 2 3
TCJY336M020#0070E Y 33 20 105 66 6 70 1600 1100 700 – 2 3
TCJD476M020#0055E D 47 20 105 94 6 55 2000 1400 900 – 2 3
TCJX476M020#0055E X 47 20 105 94 6 55 1800 1300 800 – 3 3
TCJX476M020#0070E X 47 20 105 94 6 70 1600 1100 700 – 3 3
TCJY476M020#0070E Y 47 20 125 94 6 70 1600 1100 700 400 0 3
TCJD686M020#0055E D 68 20 105 136 6 55 2000 1400 900 – 3 3
TCJE686M020#0045E E 68 20 105 136 6 45 2400 1700 1100 – 2 3
TCJY686M020#0050E Y 68 20 105 136 6 50 1900 1300 900 – 2 3
TCJC107M020#0070E C 100 20 125 200 10 70 1600 1100 700 400 0 3
TCJD107M020#0055E D 100 20 105 200 6 55 2000 1400 900 – 2 3
TCJE107M020#0045E E 100 20 125 200 10 45 2400 1700 1100 600 0 3
TCJY107M020#0055E Y 100 20 105 200 6 55 1800 1300 800 – 2 3
TCJU227M020R0070E U 220 20 105 440 12 70 2300 1600 1000 – 2 3
25 Volt @ 85°C
TCJA475M025#0500E A 4.7 25 125 11.8 8 500 400 300 200 100 1 3
TCJB475M025#0100E B 4.7 25 105 11.8 6 100 1100 800 500 – 3 3
TCJB475M025#0150E B 4.7 25 105 11.8 6 150 900 600 400 – 3 3
TCJA685M025#0150E A 6.8 25 105 17 6 150 800 600 400 – 3 3
TCJB685M025#0090E B 6.8 25 105 17 6 90 1200 800 500 – 2 3
053122

TCJ Series
Rated ESR Max.
(V) (mΩ)
(ºC)
TCJB685M025#0150E B 6.8 25 105 17 6 150 900 600 400 – 3 3
TCJT685M025#0100E T 6.8 25 105 17 6 100 1000 700 500 – 3 3
TCJT685M025#0150E T 6.8 25 105 17 6 150 800 600 400 – 3 3
TCJA106M025#0150E A 10 25 105 25 6 150 800 600 400 – 3 3
TCJB106M025#0090E B 10 25 105 25 6 90 1200 800 500 – 2 3
TCJB106M025#0100E B 10 25 105 25 6 100 1100 800 500 – 2 3
TCJB106M025#0150E B 10 25 105 25 6 150 900 600 400 – 2 3
TCJB156M025#0100E B 15 25 105 37.5 6 100 1400 1400 900 – 2 3
TCJB156M025#0150E B 15 25 105 37.5 6 150 900 600 400 – 2 3
TCJY156M025#0090E Y 15 25 105 37.5 6 90 1400 1000 600 – 2 3
TCJB226M025#0100E B 22 25 105 55 6 100 1100 800 500 – 2 3
TCJB226M025#0150E B 22 25 105 55 6 150 900 600 400 – 2 3
TCJC226M025#0100E C 22 25 105 55 6 100 1300 900 600 – 3 3
TCJD226M025#0060E D 22 25 105 55 6 60 1900 1300 900 – 2 3
TCJD226M025#0100E D 22 25 105 55 6 100 1500 1100 700 – 2 3
TCJX226M025#0100E X 22 25 105 55 8 100 1300 900 600 – 2 3
TCJY226M025#0070E Y 22 25 105 55 6 70 1600 1100 700 – 3 3
TCJD336M025#0060E D 33 25 105 82.5 6 60 1900 1300 900 – 2 3
TCJD336M025#0100E D 33 25 105 82.5 6 100 1500 1100 700 – 2 3
TCJX336M025#0070E X 33 25 105 82.5 6 70 1600 1100 700 – 2 3
TCJX336M025#0100E X 33 25 105 82.5 6 100 1300 900 600 – 2 3
TCJY336M025#0060E Y 33 25 105 82.5 6 60 1800 1300 800 – 2 3
TCJY336M025#0070E Y 33 25 105 82.5 6 70 1600 1100 700 – 2 3
TCJY336M025#0100E Y 33 25 105 82.5 6 100 1400 1000 600 – 2 3
TCJD476M025#0060E D 47 25 105 117.5 6 60 1900 1300 900 – 3 3
TCJD476M025#0100E D 47 25 105 117.5 6 100 1500 1100 700 – 3 3
TCJE476M025#0050E E 47 25 105 117.5 6 50 2200 1500 1000 – 3 3
TCJY476M025#0100E Y 47 25 105 117.5 6 100 1400 1000 600 – 3 3
TCJD686M025#0070E D 68 25 105 170 6 70 1800 1300 800 – 2 3
TCJE686M025#0050E E 68 25 105 170 6 50 2200 1500 1000 – 3 3
TCJY686M025#0100E Y 68 25 105 170 6 100 1400 1000 600 – 3 3
TCJD107M025#0055E D 100 25 105 250 6 55 2000 1400 900 – 2 3
TCJD107M025#0070E D 100 25 105 250 6 70 1800 1300 800 – 2 3
TCJE107M025#0080E E 100 25 105 250 6 80 1800 1300 800 – 2 3
TCJU107M025R0070E U 100 25 125 250 12 70 2300 1600 1000 600 1 3
TCJU157M025R0070E U 150 25 105 375 12 70 2300 1600 1000 – 2 3
35 Volt @ 85°C
TCJB155M035#0200E B 1.5 35 105 5.3 6 200 800 600 400 – 2 3
TCJB225M035#0200E B 2.2 35 105 7.7 6 200 800 600 400 – 3 3
TCJA335M035#0500E A 3.3 35 125 11.6 8 500 400 300 200 100 1 3
TCJB335M035#0200E B 3.3 35 105 11.6 6 200 800 600 400 – 3 3
TCJB475M035#0200E B 4.7 35 105 16.5 6 200 800 600 400 – 3 3
TCJC475M035#0200E C 4.7 35 105 16.5 6 200 900 600 400 – 3 3
TCJC685M035#0200E C 6.8 35 105 23.8 6 200 900 600 400 – 3 3
TCJB106M035#0200E B 10 35 105 35 6 200 800 600 400 – 2 3
TCJC106M035#0200E C 10 35 105 35 6 200 900 600 400 – 3 3
TCJY106M035#0070E Y 10 35 105 35 6 70 1600 1100 700 – 2 3
TCJB156M035#0200E B 15 35 105 52.5 6 200 800 600 400 – 2 3
TCJC156M035#0200E C 15 35 105 52.5 6 200 900 600 400 – 3 3
TCJD156M035#0070E D 15 35 105 52.5 6 70 1800 1300 800 – 3 3
TCJD156M035#0100E D 15 35 105 52.5 6 100 1500 1100 700 – 3 3
TCJY156M035#0070E Y 15 35 105 52.5 6 70 1600 1100 700 – 3 3
TCJY156M035#0100E Y 15 35 105 52.5 6 100 1400 1000 600 – 3 3
TCJD226M035#0070E D 22 35 105 77 6 70 1800 1300 800 – 2 3
TCJD226M035#0100E D 22 35 105 77 6 100 1500 1100 700 – 2 3
TCJY226M035#0150E Y 22 35 105 77 6 150 1100 800 500 – 3 3
TCJD336M035#0070E D 33 35 105 115.5 6 70 1800 1300 800 – 2 3
TCJD336M035#0100E D 33 35 105 115.5 6 100 1500 1100 700 – 2 3
TCJE336M035#0055E E 33 35 105 115.5 6 55 2100 1500 900 – 3 3
TCJE336M035#0070E E 33 35 105 115.5 6 70 1900 1300 900 – 3 3
TCJU336M035R0070E U 33 35 125 115.5 12 70 2300 1600 1000 600 1 3
TCJY336M035#0100E Y 33 35 105 115.5 6 100 1400 1000 600 – 3 3
TCJE476M035#0055E E 47 35 105 164.5 6 55 2100 1500 900 – 2 3
TCJU476M035R0070E U 47 35 125 164.5 12 70 2300 1600 1000 600 1 3
TCJY476M035#0100E Y 47 35 105 164.5 6 100 1400 1000 600 – 3 3
TCJU157M035#0100E U 150 35 105 525 10 100 1900 1300 900 - 2 3
50 Volt @ 85°C
TCJB684M050#0400E B 0.68 50 105 3.4 6 400 600 400 300 – 3 3
TCJB105M050#0300E B 1.0 50 105 5 6 300 600 400 300 – 3 3
TCJB155M050#0300E B 1.5 50 105 7.5 6 300 600 400 300 – 3 3
053122

TCJ Series
Rated ESR Max.
(V) (mΩ)
(ºC)
TCJC155M050#0300E C 1.5 50 105 7.5 6 300 800 600 400 – 3 3
TCJB225M050#0300E B 2.2 50 125 11 8 300 600 400 300 200 0 3
TCJC225M050#0300E C 2.2 50 105 11 6 300 800 600 400 – 3 3
TCJB335M050#0300E B 3.3 50 125 16.5 8 300 600 400 300 200 0 3
TCJC335M050#0200E C 3.3 50 105 16.5 8 200 900 600 400 – 3 3
TCJC475M050#0200E C 4.7 50 105 23.5 8 200 900 600 400 – 3 3
TCJX475M050#0250E X 4.7 50 105 23.5 6 250 800 600 400 – 2 5
TCJY475M050#0250E Y 4.7 50 105 23.5 6 250 900 600 400 – 2 3
TCJC685M050#0200E C 6.8 50 105 34 8 200 900 600 400 – 3 3
TCJD685M050#0120E D 6.8 50 105 34 10 120 1400 1000 600 – 3 3
TCJD106M050#0090E D 10 50 105 50 10 90 1600 1100 700 – 3 3
TCJD106M050#0120E D 10 50 105 50 10 120 1400 1000 600 – 3 3
TCJE106M050#0070E E 10 50 105 50 6 70 1900 1300 900 – 3 3
TCJE106M050#0100E E 10 50 105 50 6 100 1600 1100 700 – 3 3
TCJD156M050#0150E D 15 50 125 75 8 150 1200 800 500 300 1 3
TCJE156M050#0070E E 15 50 105 75 6 70 1900 1300 900 – 3 3
TCJE156M050#0100E E 15 50 105 75 6 100 1600 1100 700 – 3 3
TCJD226M050#0090E D 22 50 125 110 8 90 1600 1100 700 400 1 3
TCJE226M050#0075E E 22 50 125 110 8 75 1800 1300 800 500 1 3
TCJE226M050#0150E E 22 50 105 110 8 150 1300 900 600 – 2 3
63 Volt @ 85°C
TCJB474M063#0400E B 0.47 63 105 3 8 400 600 400 300 – 3 3
TCJB684M063#0300E B 0.68 63 105 4.3 8 300 600 400 300 – 3 3
TCJB105M063#0300E B 1.0 63 105 6.3 8 300 600 400 300 – 3 3
TCJC105M063#0300E C 1.0 63 105 6.3 6 300 800 600 400 – 3 3
TCJC155M063#0300E C 1.5 63 105 9.5 6 300 800 600 400 – 3 3
TCJC225M063#0200E C 2.2 63 105 13.9 6 200 900 600 400 – 3 3
TCJC335M063#0200E C 3.3 63 105 20.8 6 200 900 600 400 – 3 3
TCJC475M063#0200E C 4.7 63 105 29.6 6 200 900 600 400 – 3 3
TCJD475M063#0120E D 4.7 63 105 29.6 6 120 1400 1000 600 – 3 3
TCJD685M063#0120E D 6.8 63 105 42.8 6 120 1400 1000 600 – 3 3
TCJE685M063#0100E E 6.8 63 105 42.8 6 100 1600 1100 700 – 3 3
TCJE685M063#0150E E 6.8 63 105 42.8 6 150 1300 900 600 – 3 3
TCJE106M063#0100E E 10 63 105 63 6 100 1600 1100 700 – 3 3
TCJE106M063#0150E E 10 63 105 63 6 150 1300 900 600 – 3 3
TCJE156M063#0150E E 15 63 105 94.5 8 150 1300 900 600 – 2 3
75 Volt @ 85°C
TCJD475M075#0150E D 4.7 75 105 35.3 6 150 1200 800 500 – 3 3
TCJD685M075#0120E D 6.8 75 105 51 6 120 1400 1000 600 – 3 3
100 Volt @ 85°C
TCJD475M100#0250E D 4.7 100 105 47 8 250 900 600 400 – 4 3
125 Volt @ 85°C
TCJD335M125#0250E D 3.3 125 105 41.2 8 250 900 600 400 – 4 3
Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are
measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit
post mounting. For typical weight and composition see page 259.
111521

TCJ Series
RECOMMENDED DERATING FACTOR
Voltage and temperature derating as percentage of Vr
Product Category 0 Product Category 1

100% 100%
95% Rated Voltage 95% Rated Voltage
90% 90%
Recommended Application Voltage Recommended Application
85% 85%
for Vr ≤ 10 V Voltage for Vr ≤ 10 V
80% 80%
Recommended Application Voltage Recommended Application
75% 75%
for Vr ≥ 16 V Voltage for Vr ≥ 16 V
70% 70%
67% 67%
65% 65%
60% 60% 60% 60%
55% 54% 55% 54%
50% 50%
-55°C 85°C 105°C 125°C -55°C 85°C 125°C
Product Category 2 Product Category 3, 4

100% 100% 100%
90% 90% 90%
Recommended Application Recommended Application
85% 85%
Voltage for Vr ≤ 10 V Voltage for Vr ≤ 10 V
80% 80% 80% 80%
Recommended Application 75%
Recommended Application
75%
Voltage for Vr ≥ 16 V Voltage for Vr ≥ 16 V 72%
70% 70%
65% 65% 64%
60% 60%
55% 55%
50% 50%
-55°C 85°C 105°C -55°C 85°C 105°C
Product Category 5
100% 100%
95% Rated Voltage
90% 90%
85%
Voltage for Vr ≤ 10 V
80% 80%
75%
Voltage for Vr ≥ 16 V
70%
65%
60%
55%
50%
-55°C 85°C
060520

TCJ Series
PRODUCT CATEGORY 0, 1 (TEMPERATURE RANGE -55°C TO +125°C)
TEST Condition Characteristics
Apply rated voltage (Ur) at 85ºC (CATEGORY 1) Visual examination no visible damage
or 105ºC (CATEGORY 0) or 2/3 rated voltage (Ur) DCL 1.25 x initial limit
at 125ºC (all CATEGORIES) for 2000 hours
Endurance ΔC/C within +10/-20% of initial value
through a circuit impedance of ≤0.1Ω/V.
Stabilize at room temperature for 1-2 hours DF 1.5 x initial limit
before measuring. ESR 2 x initial limit
Store at 125ºC, no voltage applied, for 2000 DCL 2 x initial limit
Storage Life hours. Stabilize at room temperature for 1-2 ΔC/C within +10/-20% of initial value
hours before measuring. DF 1.5 x initial limit
Store at 65ºC and 95% relative humidity fo 500 DCL 3 x initial limit
Humidity ΔC/C within +35/-5% of initial value
Step Temperature °C Duration (min) +20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
1 +20 15
2 -55 15
Temperature
3 +20 15
Stability ΔC/C n/a +0/-20% ±5% +20/-0% +30/-0% ±5%
4 +85 15
5 +125 15
6 +20 15
Apply 1.3x 2/3x rated voltage (Ur) at 125ºC for Visual examination no visible damage
Surge 1000 cycles of duration 6 min (30 sec charge, DCL initial limit
Voltage 5 min 30 sec discharge) through a charge / ΔC/C within +10/-20% of initial value
discharge resistance of 1000Ω DF 1.25 x initial limit
DCL initial limit
Mechanical Shock MIL-STD-202, Method 213, Condition C ΔC/C within ±5% of initial value
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours.
102921

TCJ Series
PRODUCT CATEGORY 2, 3, 4 (TEMPERATURE RANGE -55°C TO +105°C)
Apply rated voltage (Ur) at 85ºC for 2000 hours Visual examination no visible damage
through a circuit impedance of ≤0.1Ω/V (all DCL 1.25 x initial limit
CATEGORIES). And/or apply rated voltage (Ur)
Endurance (CATEGORY 2) or 0.8x rated voltage (CATEGORY 3, 4) ΔC/C within +10/-20% of initial value
at 105°C for 2000 hours through a circuit impedance
of ≤0.1Ω/V Always stabilize at room temperature for DF 1.5 x initial limit
1-2 hours before measuring. ESR 2 x initial limit
DCL (VR ≤ 75V) 1.25 x initial limit
Store at 105ºC, no voltage applied, for 2000 hours. DCL (VR > 75V) 2 x initial limit
Storage Life Stabilize at room temperature for 1-2 hours before
measuring. ΔC/C within +10/-20% of initial value
Store at 65ºC and 95% relative humidity for 500 DCL 3 x initial limit
Step Temperature °C Duration (min) +20ºC -55ºC +20ºC +85ºC +105ºC +20ºC
1 +20 15
2 -55 15
Temperature
3 +20 15
Stability ΔC/C n/a +0/-20% ±5% +20/-0% +30/-0% ±5%
4 +85 15
5 +105 15
6 +20 15
Apply 1.3x rated voltage (Ur) at 105ºC for CATEGORY
2, or apply 1.3x 0.8x rated voltage (Ur) at 105ºC for DCL initial limit
Surge
CATEGORY 3, 4 for 1000 cycles of duration 6 min (30
Voltage ΔC/C within +10/-20% of initial value
sec charge, 5 min 30 sec discharge) through a charge /
discharge resistance of 1000Ω
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
102921

TCJ Series
PRODUCT CATEGORY 5 (TEMPERATURE RANGE -55°C TO +85°C)
Apply rated voltage (Ur) at 85ºC for 2000 hours through DCL 1.25 x initial limit
Endurance a circuit impedance of ≤0.1Ω/V. Stabilize at room ΔC/C within +10/-20% of initial value
temperature for 1-2 hours before measuring. DF 1.5 x initial limit
Storage Life Stabilize at room temperature for 1-2 hours before ΔC/C within +10/-20% of initial value
Store at 65ºC and 95% relative humidity for 500 hours, DCL 5 x initial limit
Humidity with no applied voltage. Stabilize at room temperature ΔC/C within +35/-5% of initial value
+20ºC -55ºC +20ºC +85ºC +20ºC
DCL IL* n/a IL* 10 x IL* IL*
1 +20 15
Temperature
2 -55 15
Stability ΔC/C n/a +0/-20% ±5% +20/-0% ±5%
3 +20 15
4 +85 15
DF IL* 1.5 x IL* IL* 1.5 x IL* IL*
5 +125 15
Apply 1.3x rated voltage (Ur) at 85ºC for 1000 cycles of DCL initial limit
Surge
duration 6 min (30 sec charge, 5 min 30 sec discharge)
Voltage ΔC/C within +10/-20% of initial value
DCL initial limit
Mechanical Shock MIL-STD-202, Method 213, Condition C ΔC/C within ±5% of initial value
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
102921

TCJ Series
SERIES LINE UP : Conductive Polymer
010521

TCM Series – Multianode Ultra Low ESR - J-Lead
TCM Series
Conductive Polymer Solid Electrolytic Chip Multianode Capacitors
FEATURES
• Conductive Polymer Electrode,
Multianode Design
• Benign Failure Mode Under
Recommended Use Conditions LEAD-FREE COMPATIBLE
• Extremely Low ESR COMPONENT
• 3x Reflow 260°C Compatible SnPb termination option is not
• 100% Surge Current Tested RoHS compliant.
• Volumetric Efficiency
• High Frequency Capacitance Retention
Elektra Award 2010
APPLICATIONS
• Telecommunication Routers
• Base Stations with High Power DC/DCs

EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1 ±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) –0.10 (0.004) –0.10 (0.004) (0.008) –0.20 (0.008)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
U 2924 7361-43 7.30 (0.287) 6.10 (0.240) 4.10 (0.162) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
MARKING
V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
E, U, V CASE W1 dimension applies to the termination width for A dimensional area only.
AVX LOGO
Polymer Capacitance Value in pF
337 = 330µF
Polarity
A = 10V
(Anode+)
XXXXX ID Code
HOW TO ORDER
TCM E 108 M 004 R 0010 E
Type Case Size Capacitance Code Tolerance Rated DC Packaging ESR in mΩ Additional
See table pF code: 1st two digits M = ±20% Voltage R = Pure Tin 7" Reel Character
above represent significant figures, 002 = 2.5Vdc S = Pure Tin 13" Reel E = Black resin
3rd digit represents multiplier 004 = 4Vdc H = Tin Lead 7" Reel (it is possible to order
(number of zeros to follow) 006 = 6.3Vdc K = Tin Lead 13" Reel PN without "E" as
010 = 10Vdc identical product)
016 = 16Vdc
020 = 20Vdc
025 = 25Vdc
035 = 35Vdc
040 = 40Vdc
050 = 50Vdc
100 = 100Vdc
Technical Data: All technical data relate to an ambient temperature of +25ºC
Capacitance Range: 10μF to1000μF
Temperature Range: -55ºC to +125ºC
Termination Finish: Sn Plating (standard) and SnPb Plating
102821

TCM Series
μF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 40V (G) 50V (T) 100V (A)
10 106 V(50)
15 156 E(100)
22 226 E(25) E(75)
33 336 E(60) E(60)
47 476 E(60) E(45,60)
68 686 E(25) E(50) U(40,50)
100 107 E(25) E(25)
150 157 E(25,40)
220 227 E(25) E(25,40)
330 337 E(10,15) E(10,15) E(15, 25)
470 477 E(10,12) E(10,12) E(7,10,12) E(15, 25)
680 687 E(10,12) E(10,12) E(12)
1000 108 E(6,10,12) E(6,8,10,12)

Rated ESR Max.
Case Capacitance Operating DCL Max. DF Max.
Size (μF) Temperature (μA) (%) 45ºC 85ºC 125ºC
(V) (mΩ)
(ºC)
2.5 Volt @ 105°C
TCME477M002#0010E E 470 2.5 125 117.5 10 10 6400 4500 1600 3
TCME477M002#0012E E 470 2.5 125 117.5 10 12 5800 4100 1500 3
TCME687M002#0010E E 680 2.5 125 170 10 10 6400 4500 1600 3
TCME687M002#0012E E 680 2.5 125 170 10 12 5800 4100 1500 3
TCME108M002#0006E E 1000 2.5 125 250 10 6 8300 5800 2100 3
TCME108M002#0010E E 1000 2.5 125 250 10 10 6400 4500 1600 3
TCME108M002#0012E E 1000 2.5 125 250 10 12 5800 4100 1500 3
4 Volt @ 105°C
TCME477M004#0010E E 470 4 125 188 8 10 6400 4500 1600 3
TCME477M004#0012E E 470 4 125 188 8 12 5800 4100 1500 3
TCME687M004#0010E E 680 4 125 272 8 10 6400 4500 1600 3
TCME687M004#0012E E 680 4 125 272 8 12 5800 4100 1500 3
TCME108M004#0006E E 1000 4 125 400 8 6 8300 5800 2100 3
TCME108M004#0008E E 1000 4 125 400 8 8 7200 5000 1800 3
TCME108M004#0010E E 1000 4 125 400 8 10 6400 4500 1600 3
TCME108M004#0012E E 1000 4 125 400 8 12 5800 4100 1500 3
6.3 Volt @ 105°C
TCME337M006#0010E E 330 6.3 125 198 8 10 6400 4500 1600 3
TCME337M006#0015E E 330 6.3 125 198 8 15 5200 3600 1300 3
TCME477M006#0007E E 470 6.3 125 282 10 7 7700 5400 1900 3
TCME477M006#0010E E 470 6.3 125 282 10 10 6400 4500 1600 3
TCME477M006#0012E E 470 6.3 125 282 10 12 5800 4100 1500 3
TCME687M006#0012E E 680 6.3 125 408 8 12 5800 4100 1500 3
10 Volt @ 105°C
TCME227M010#0025E E 220 10 125 220 8 25 4000 2800 1000 3
TCME337M010#0010E E 330 10 125 330 8 10 6400 4500 1600 3
TCME337M010#0015E E 330 10 125 330 8 15 5200 3600 1300 3
TCME477M010#0015E E 470 10 125 470 10 15 5200 3600 1300 3
TCME477M010#0025E E 470 10 125 470 10 25 4000 2800 1000 3
16 Volt @ 105°C
TCME107M016#0025E E 100 16 125 160 8 25 4000 2800 1000 3
TCME157M016#0025E E 150 16 125 240 8 25 4000 2800 1000 3
TCME157M016#0040E E 150 16 125 240 8 40 3200 2200 800 3
TCME227M016#0025E E 220 16 125 352 8 25 4000 2800 1000 3
TCME227M016#0040E E 220 16 125 352 8 40 3200 2200 800 3
TCME337M016#0015E E 330 16 125 528 8 15 5200 3600 1300 3
TCME337M016#0025E E 330 16 125 528 8 25 4000 2800 1000 3
20 Volt @ 105°C
TCME686M020#0025E E 68 20 125 136 8 25 4000 2800 1000 3
TCME107M020#0025E E 100 20 125 200 8 25 4000 2800 1000 3
102621

TCM Series

Rated ESR Max.
Case Capacitance Operating DCL Max. DF Max.
Size (μF) Temperature (μA) (%) 45ºC 85ºC 125ºC
(V) (mΩ)
(ºC)
25 Volt @ 105°C
TCME336M025#0060E E 33 25 125 82.5 8 60 2600 1800 700 3
TCME476M025#0060E E 47 25 125 117.5 8 60 2600 1800 700 3
TCME686M025#0050E E 68 25 125 170 8 50 2900 2000 700 3
35 Volt @ 105°C
TCME226M035#0025E E 22 35 125 77 8 25 4000 2800 1000 3
TCME336M035#0060E E 33 35 125 115.5 8 60 2600 1800 700 3
TCME476M035#0045E E 47 35 125 164.5 8 45 3000 2100 800 3
TCME476M035#0060E E 47 35 125 164.5 8 60 2600 1800 700 3
40 Volt @ 105°C
TCMU686M040#0040E U 68 40 125 272 10 40 3300 2300 800 3
TCMU686M040#0050E U 68 40 125 272 10 50 2900 2000 700 3
50 Volt @ 105°C
TCME156M050#0100E E 15 50 125 75 10 100 2000 1400 500 3
TCME226M050#0075E E 22 50 125 110 10 75 2300 1600 600 3
100 Volt @ 105°C
TCMV106M100R/S0050E V 10 100 125 100 8 50 2900 2000 700 3
Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2
volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 259. NOTE: KYOCERA AVX reserves the
right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards.
RECOMMENDED DERATING FACTOR 100%

For Vr ≤ 10V
100%
For Vr ≥ 16V
Rated Voltage Rated Voltage

Voltage and temperature derating as percentage of Vr.
95% 95%
90% 90%
85% Recommended 85%
Rated Operating Temperature 80%

75%
Application Voltage 80%
75% Recommended
voltage ≤85°C 105°C 125°C 70%
67%
70% Application Voltage
67%
65% 65%
≤10V 90% 90% 60% 60% 60% 60%
≥16V 80% 80% 54%

55% 55% 54%
50% 50%
-55% 85ºC 105ºC 125ºC -55% 85ºC 105ºC 125ºC
QUALIFICATION TABLE
TCM series (Temperature range -55°C to +125°C)

Apply rated voltage (Ur) at 105°C and category DCL 1.25 x initial limit
voltage (Uc) at 125°C for 2000 hours through a
circuit impedance of ≤0.1Ω/V. Stabilize at room
temperature for 1-2 hours before measuring. DF 1.5 x initial limit
Store at 125ºC, no voltage applied, for 2000 DCL 2 x initial limit
Storage Life hours. Stabilize at room temperature for 1-2 hours ΔC/C within ±20% of initial value
before measuring. DF 1.5 x initial limit
+20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
1 +20 15
Stability 4 +85 15 ΔC/C n/a +0/-20% ±10% +20/-0% +30/-0% ±10%
5 +125 15
Apply 1.3x category voltage (Uc) at 125ºC for Visual examination no visible damage
1000 cycles of duration 6 min (30 sec charge, DCL initial limit
Surge Voltage
5 min 30 sec discharge) through a charge/ ΔC/C within +20/-30% of initial value
discharge resistance of 1000Ω DF 1.25 x initial limit
*Initial Limit
102621

TCM Series
010521

TCN Series – High CV/cc - Undertab
TCN Series
Highest CV/CC Conductive Polymer Chip Capacitors Undertab
• Highest CV/cc in Broad Range of Low Profiles • Consumer Applications
• Conductive Polymer Electrode (e.g. Mobiles, MP3 etc.)
• Benign Failure Mode Under Recommended use Conditions • Bulk Decoupling of SoC
• Lower ESR (System on Chip)
• Undertab Terminations Layout:
‒ High Volumetric Efficiency
‒ High PCB Assembly Density
‒ High Capacitance in Smaller Dimensions
COMPONENT
Polarity Band (Anode+)
W W L W
WN WP AP S AN WN
CASE DIMENSIONS millimeters (inches)

Code H max. S Min.
Code Metric (0.008) -0.10 (0.004) (0.004) (0.004) (0.004) (0.004)
T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039)
X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) 3.25 (0.128) 3.25 (0.128) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083)
Z 2917 7343-15 7.30 ±0.30 4.30 ±0.30 1.50 (0.059) 2.40 (0.094) 2.40 (0.094) 1.30 ±0.30 1.30 ±0.30 4.40 (0.173)
(0.287 ±0.012) (0.169 ±0.012) (0.051 ±0.012) (0.051 ±0.012)
4 2924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083)
8 2924 7361-20 7.30 ±0.30 6.10 (0.240) 2.00 (0.079) 4.45 (0.175) 4.45 (0.175) 1.60 ±0.30 1.60 ±0.30 3.80 (0.150)
(0.287 ±0.012) (0.063 ±0.012) (0.063 ±0.012)
MARKING
T, X, Z CASE 4, 8 CASE
Polymer Logo Polymer Logo
HOW TO ORDER
TCN T 157 M 006 R 0200 E
Type Additional Character
Case Size E = Black Resin
(it is possible to order PN without "E" as identical product)
See table above
ESR in mΩ
Capacitance Code
pF code: 1st two digits represent significant figures 3rd digit Packaging
represents multiplier (number of zeros to follow) R = Pure Tin 7" Reel
S = Pure Tin 13" Reel
Tolerance A= NiPdAu 7“ Reel
M = ± 20%
B= NiPdAu 13” Reel
A,B = only case 8 and Z
Rated DC Voltage
006 = 6.3Vdc 025 = 25Vdc
010 = 10Vdc 035 = 35Vdc
016 = 16Vdc 050 = 50Vdc
020 = 20Vdc
051722

TCN Series
Rated Voltage DC (VR) ≤ +85°C: 6.3 10 16 20 25 35 50
Category Voltage (VC) ≤ +105ºC: 5 8 13 16 20 28 40
Surge Voltage (VS) ≤ +85ºC: 8 13 21 26 33 46 65

Capacitance Rated Voltage DC to 85°C / 0.66DC to 105°C

4.7 475 T(200)
10 106 T(150, 200)
22 226 T(200)
33 336 T(200) 4(200)
47 476 T(150) X(100) X(150)/Z(100,150)
100 107 Z(100) 4(100) 4(100)/8(100)
150 157 T(200) X(100) 4(70)/8(70)
220 227 4(70) 4(100) 4(100)
330 337 4(70) 4(100)
470 477 X(50) 4(70,100)
680 687 4(70)
1000 108 4(55)
1500 158 4(55)

Engineering Samples - Please Contact KYOCERA AVX
063022

TCN Series
Maximum
Rated DCL DF ESR Max. 100kHz RMS Current (mA)
Case Capacitance Operating Product
Part Number Voltage Max. Max. @ 100kHz MSL
Size (μF) Temperature Category
(V) (μA) (%) (mΩ) 45ºC 85ºC 105ºC
(ºC)
6.3 Volt @ 85°C
TCNT157M006#0200E T 150 6.3 105 90 10 200 700 500 300 3 4
TCNX477M006#0050E X 470 6.3 85 282 10 50 1900 1300 – 5 5
TCN4108M006#0055E 4 1000 6.3 85 600 20 55 1860 1302 – 5 4
TCN4158M006#0055E 4 1500 6.3 85 900 20 55 1860 1302 – 5 4
10 Volt @ 85°C
TCN4687M010#0070E 4 680 10 105 680 20 70 1650 1155 660 3 4
16 Volt @ 85°C
TCNT336M016#0200E T 33 16 105 52.8 6 200 700 500 300 3 4
TCNT476M016#0150E T 47 16 105 75.2 6 150 800 600 400 3 4
TCNX157M016#0100E X 150 16 105 240 6 100 1300 900 600 3 4
TCN4227M016#0070E 4 220 16 105 352 20 70 1650 1155 660 2 4
TCN4337M016#0070E 4 330 16 105 528 20 70 1650 1155 660 3 4
TCN4477M016#0070E 4 470 16 105 752 20 70 1650 1155 660 3 4
TCN4477M016#0100E 4 470 16 105 752 20 100 1380 966 552 3 4
20 Volt @ 85°C
TCNZ107M020#0100E Z 100 20 105 200 8 100 1300 900 600 3 4
TCN4227M020#0100E 4 220 20 85 440 10 100 1380 966 – 5 4
TCN4337M020#0100E 4 330 20 105 660 20 100 1380 966 552 3 4
25 Volt @ 85°C
TCNT226M025#0200E T 22 25 105 55 6 200 700 500 300 3 4
TCNX476M025#0100E X 47 25 105 117.5 6 100 1300 900 600 2 5
TCN4107M025#0100E 4 100 25 105 250 6 100 1380 966 552 2 4
TCN4157M025#0070E 4 150 25 105 375 6 70 1650 1155 660 2 4
TCN8157M025#0070E 8 150 25 105 375 8 70 1650 1155 660 2 3
TCN4227M025#0100E 4 220 25 105 550 10 100 1380 966 552 3 4
35 Volt @ 85°C
TCNT475M035#0200E T 4.7 35 105 16.5 10 200 700 500 300 3 4
TCNT106M035#0150E T 10 35 105 35 10 150 800 600 400 3 4
TCNT106M035#0200E T 10 35 105 35 10 200 700 500 300 3 4
TCNZ476M035#0100E Z 47 35 105 165 10 100 1300 900 600 3 4
TCNX476M035#0150E X 47 35 105 165 10 150 1100 800 500 3 4
TCNZ476M035#0150E Z 47 35 105 165 10 150 1100 800 500 3 4
TCN4107M035#0100E 4 100 35 105 350 10 100 1380 966 552 2 3
TCN8107M035#0100E 8 100 35 105 350 10 100 1380 966 552 2 3
50 Volt @ 85°C
TCN4336M050#0200E 4 33 50 85 165 12 200 970 679 - 5 3
Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz,
0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and
composition see page 259.
NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size to the same reliability standards.

Product Category 2 Product Category 3 Product Category 5
100% 100% 100%
95% Rated Voltage 95% Rated Voltage 95% Rated Voltage

90% 90% 90%
85%
Recommended Application Recommended Application Recommended Application
85% 85%
Voltage for Vr ≤ 10V Voltage for Vr ≤ 10V Voltage for Vr ≤ 10V
80% 80% 80% 80%
75%
Voltage for Vr ≥ 16V Voltage for Vr ≥ 16V 72% Voltage for Vr ≥16V
70% 70% 70%
65% 65% 65%

64%
60% 60% 60%
55% 55% 55%
50% 50% 50%

-55ºC 85ºC 105ºC -55ºC 85ºC 105ºC -55ºC 85ºC
063022

TCN Series
Apply rated voltage (Ur) at 85ºC for 2000 hours Visual examination no visible damage
CATEGORIES). And / or apply rated voltage (Ur)
Endurance (CATEGORY 2) or 0.8x rated voltage (CATEGORY ΔC/C within ±20% of initial value
3) at 105°C for 2000 hours through a circuit
impedance of ≤0.1Ω/V. Always stabilize at room DF 1.5 x initial limit
temperature for 1-2 hours before measuring. ESR 2 x initial limit
DCL (VR ≤ 75V) 1.25 x initial limit
Store at 105ºC, no voltage applied, for 2000 DCL (VR > 75V) 2 x initial limit
Storage Life hours. Stabilize at room temperature for 1-2 hours
before measuring.
+20ºC -55ºC +20ºC +85ºC +105ºC +20ºC
1 +20 15
Stability 4 +85 15 ΔC/C n/a +0/-20% ±5% +20/-0% +30/-0% ±5%
5 +105 15
Surge
CATEGORY 3 for 1000 cycles of duration 6 min (30 within +10/-20% of initial value for Vr ≤ 10V
Voltage sec charge, 5 min 30 sec discharge) through a charge ΔC/C
within +20/-30% of initial value for Vr ≥ 16V
/ discharge resistance of 1000Ω
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours.
110121

TCN Series
Apply rated voltage (Ur) at 85ºC for 2000 hours through
Endurance a circuit impedance of ≤0.1Ω/V. Stabilize at room ΔC/C within ±20% of initial value
Store at 65ºC and 95% relative humidity for 500 hours, DCL 5 x initial limit
Humidity with no applied voltage. Stabilize at room temperature ΔC/C within +40/-20% of initial value
Step Temperature°C Duration(min) +20ºC -55ºC +20ºC +85ºC +20ºC
1 +20 15
Temperature 2 -55 15 DCL IL* n/a IL* 10 x IL* IL*
Stability 3 +20 15 ΔC/C n/a +0/-20% ±5% +20/-0% ±5%
4 +85 15
5 +20 15 DF IL* 1.5 x IL* IL* 1.5 x IL* IL*
Apply 1.3x rated voltage (Ur) at 85ºC for 1000 cycles of DCL initial limit
Surge
duration 6 min (30 sec charge, 5 min 30 sec discharge) within +10/-20% of initial value for Vr ≤ 10V
Voltage through a charge / discharge resistance of 1000Ω ΔC/C
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
110121

TCN Series
010521

J-CAP™ Series – Highest Joules/cc - Undertab
J-CAP™ Series
Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors
• Highest Energy per Volume • Power Backup for SSDs (MLC, SLC,
• Fast DCL Drop With Voltage Applied After Reflow EFD, PCIe)
• Benign Failure Mode Under Recommended Use Conditions • Battery-Powered Portable Equipment
• Low ESR • Industrial Alarms
• Undertab Terminations Layout: Smart Power Meters
‒ High Volumetric Efficiency • Mobile Devices
‒ Low Profile Case Sizes
‒ High Capacitance in Smaller Dimensions
‒ Close Positioning of Several Parts for Efficient High
Density PCB Layout
• 3x Reflow 260°C Compatible COMPONENT
W W L W
WN WP AP S AN WN
CASE DIMENSIONS UNDERTAB millimeters (inches)

Code H max. S Min.
Code Metric (0.008) -0.10 (0.004) (0.004) (0.004) (0.004) (0.004)
T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039)
X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) 3.25 (0.128) 3.25 (0.128) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083)
7.30±0.30 4.30±0.30 1.30±0.30 1.30±0.30
Z 2917 7343-15 1.50 (0.059) 2.40 (0.094) 2.40 (0.094) 4.40 (0.173)
(0.287±0.012) (0.169±0.012) (0.051±0.012) (0.051±0.012)
4 2924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083)
7.30±0.30 1.60±0.30 1.60±0.30
8 2924 7361-20 6.10 (0.240) 2.00 (0.079) 4.45 (0.175) 4.45 (0.175) 3.80 (0.150)
(0.287±0.012) (0.063±0.012) (0.063±0.012)
J-LEAD UNDERTAB
W
MAXIMUM ENERGY PER
L W W
L W
CASE SIZE
H H
WP CaseA P
HSMaxA Max Energy
W N W N P AP S AN W
Size (mm) (mJ)
CASE DIMENSIONS J-LEAD millimeters (inches) C 2.8 5.8
D 3.1 21.8
EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Code S Min. E 4.3 11.9
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
H 1.5 3.3
C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114) T 1.2 4.7
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) X 1.5 18.2
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) Z 1.5 18.2
4 2.0 43.0
H 1210 3528-15 3.50 (0.138) 2.80 (0.110) 1.50 (0.059) max. 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
5 4.0 46.6
5 2917 7343-40 7.30 (0.287) 4.30 (0.169) 3.80 (0.150) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
Polymer LOGO Polymer
PolymerLOGO
LOGO CapacitanceValue
ValueininpF
pF Polymer LOGO Capacitance Value in pF
8 2.0 38.8
Capacitance Value in pF Capacitance
W1 dimension applies to the156
termination
= 15µF width for A dimensional area only. 158= =15µF
156 1500µF 158 = 1500µF
Polarity
156 J Rated Voltage
Polarity
Polarity
158JJ
156 RatedVoltage
Rated Voltage
Polarity
158 J Rated Voltage
MARKING 4, 8 CASE
Band Band
Band Band
J = 6.3V J J= =6.3V
6.3V J = 6.3V
(Anode+) (Anode+)
(Anode+) (Anode+)
XXXXX ID Code XXXXX
XXXXX IDIDCode
Code XXXXX ID Code
C, D, E, H, T, X, Z, 5 CASE
Polymer LOGO Capacitance Value in pF Polymer
PolymerLOGO
LOGO Capacitance
CapacitanceValue
ValueininpF
pF Polymer LOGO Capacitance Value in pF
157 = 150µF 157
107==150µF
100µF 107 = 100µF
Polarity
Band 157 C Rated Voltage
C = 16V
Polarity
Polarity
Band
Band 157
107 CV Rated
RatedVoltage
CV==16V
Voltage
35V
Polarity
Band 107 V Rated Voltage
V = 35V
(Anode+) (Anode+)
(Anode+) (Anode+)
XXXXX ID Code XXXXX
XXXXX IDIDCode
Code XXXXX ID Code
HOW TO ORDER
TCN 4 158 M 006 R 0055 E
Type Case Capacitance Code Tolerance Rated DC Voltage Packaging ESR in mΩ Additional
TCJ Size pF code: 1st two digits represent M = ±20% 006 = 6.3Vdc 020 = 20Vdc R = Pure Tin 7" Reel Character
TCN See table significant figures, 3rd digit 010 = 10Vdc 025 = 25Vdc S = Pure Tin 13" Reel (J-Lead) E = Black resin
above represents multiplier 016 = 16Vdc 035 = 35Vdc A= NiPdAu 7“ Reel (it is possible to order
B= NiPdAu 13” Reel PN without "E"
A,B = only case 8 and Z as identical product)
051722

J-CAP™ Series

Capacitance Range: 4.7μF to 1500μF
Temperature Range: -55ºC up to +125ºC
NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or
humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded.
Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful
attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the KYOCERA AVX Conductive
Polymer Capacitor Guidelines for more information or contact factory for application assistance.

Capacitance Rated Voltage DC (VR) to 85ºC, [mJ]
μF Code 6.3V (J) 10V (A) 16V (C) 20V(D) 25V (E) 35V (V) 50V (T)
4.7 475 T(200) [1.8]
6.8 685 C(200) [5.4]
10 106 T(150, 200) [3.9] D(120) [8.0]
15 456 C(200) [5.8] E(70) [11.9]
22 226 T(200) [4.3] D(100) [8.5]

H(150)/
33 336 [3.3] D(70) [12.8]
T(200)
C(100)/ X(150)/
47 476 [1.7] T(150) [4.7] X(100) [9.2] [18.2]
H(100) Z(100,150)
68 686 H(100) [0.8] D(45) [2.5] D(50) [6.7] D(55) [8.4] D(70) [13.3]
D(70) 4(100)/
100 107 D(45) [3.6] D(50) [9.9] D(55) [12.4] [19.6] [38.8]
4(100) 8(100)
4(70)/
150 157 T(200) [1.7] D(45) [5.4] X(100) [14.9] [29.3]
8(70)
D(50)
220 227 H(170) [2.6] D(40) [7.9] [21.8] 4(100) [27.2] 4(100) [43.0]
4(70)
4(70)
330 337 D(40) [3.8] 5(100) [11.9] [32.7]
5(100)
470 477 X(50) [5.4] 5(100) [46.6]
1000 108 4(55) [11.6]
1500 158 4(55) [17.4]
Released ratings (ESR ratings in mOhms in parentheses) [Energy in mJ]

063022

J-CAP™ Series
Maximum ESR 1000kHz ENERGY
Rated DCL DF
Case Capacitance Operating Max. @ RMS Product
Part Number Voltage Max. Max. MSL Energy Energy/volume Energy/area
Size (μF) Temperature 100kHz Current Category
(V) (μA) (%) (mJ) (mJ/cm3) (mJ/cm2)
(ºC) (mΩ) (mA) 45ºC
6.3 Volt @ 85°C 6.3 Volt @ 85°C
TCJH686M006#0100E H 68 6.3 105 40.8 6 100 1000 3 3 0.8 54 8.0
TCNT157M006#0200E T 150 6.3 105 90 10 200 700 3 4 1.7 147 17.7
TCJH227M006#0170E H 220 6.3 105 132 10 170 800 3 3 2.6 173 26.0
TCJD337M006#0040E D 330 6.3 105 198 6 40 2400 2 3 3.8 42 12.2
TCNX477M006#0050E X 470 6.3 85 282 10 50 1900 5 5 5.4 115 17.3
TCN4108M006#0055E 4 1000 6.3 85 600 20 55 1860 5 4 11.6 130 26.0
TCN4158M006#0055E 4 1500 6.3 85 900 20 55 1860 5 4 17.4 195 39.0
10 Volt @ 85°C 10 Volt @ 85°C
TCJH476M010#0100E H 47 10 105 47 6 100 1000 3 3 1.7 115 17.3
TCJC476M010#0100E C 47 10 125 47 6 100 1300 1 3 1.7 34 8.8
TCJD686M010#0045E D 68 10 105 68 6 45 2200 3 3 2.5 27 7.8
TCJD107M010#0045E D 100 10 105 100 6 45 2200 3 3 3.6 40 11.5
TCJD157M010#0045E D 150 10 105 150 6 45 2200 3 3 5.4 59 17.2
TCJD227M010#0040E D 220 10 105 220 6 40 2400 3 3 7.9 87 25.2
TCJ5337M010#0100E 5 330 10 105 330 10 100 1300 2 3 11.9 100 37.8
16 Volt @ 85°C 16 Volt @ 85°C
TCJH336M016#0150E H 33 16 105 52.8 6 150 800 3 3 3.3 223 33.4
TCNT336M016#0200E T 33 16 105 52.8 6 200 700 3 4 3.3 277 33.4
TCNT476M016#0150E T 47 16 105 75.2 6 150 800 3 4 4.7 395 47.6
TCJD686M016#0050E D 68 16 105 108.8 6 50 2100 2 3 6.7 74 21.5
TCJD107M016#0050E D 100 16 105 160 6 50 2100 2 3 9.9 109 31.6
TCNX157M016#0100E X 150 16 105 240 6 100 1300 3 4 14.9 316 47.4
TCJD227M016#0050E D 220 16 105 352 10 50 2100 2 3 21.8 240 69.5
TCN4227M016#0070E 4 220 16 105 352 20 70 1650 2 4 21.8 245 49.0
TCN4337M016#0070E 4 330 16 105 528 20 70 1650 3 4 32.7 367 73.5
TCJ5337M016#0100E 5 330 16 105 528 10 100 1300 2 3 32.7 274 104.2
TCJ5477M016#0100E 5 470 16 105 752 10 100 1300 3 3 46.6 391 148.5
20 Volt @ 85°C 20 Volt @ 85°C
TCJD686M020#0055E D 68 20 105 136 6 55 2000 3 3 8.4 92 26.7
TCJD107M020#0055E D 100 20 105 200 6 55 2000 3 3 12.4 136 39.3
TCN4227M020#0100E 4 220 20 85 440 10 100 1380 5 4 27.2 305 61.1
25 Volt @ 85°C 25 Volt @ 85°C
TCNT226M025#0200E T 22 25 105 55 6 200 700 3 4 4.3 364 43.9
TCNX476M025#0100E X 47 25 105 117.5 6 100 1300 2 5 9.2 195 29.3
TCJD686M025#0070E D 68 25 105 170 6 70 1800 2 3 13.3 146 42.3
TCJD107M025#0070E D 100 25 105 250 6 70 1800 2 3 19.6 215 62.3
TCN4107M025#0100E 4 100 25 105 250 6 100 1380 2 4 19.6 219 43.9
TCN4157M025#0070E 4 150 25 105 375 6 70 1650 2 4 29.3 329 65.9
TCN8157M025#0070E 8 150 25 105 375 8 70 1650 2 3 29.3 329 65.9
TCN4227M025#0100E 4 220 25 105 550 10 100 1380 3 4 43.0 483 96.7
35 Volt @ 85°C 35 Volt @ 85°C
TCNT475M035#0200E T 4.7 35 105 16.5 10 200 700 3 4 1.8 154 18.6
TCNT106M035#0150E T 10 35 105 35 10 150 800 3 4 3.9 328 39.5
TCNT106M035#0200E T 10 35 105 35 10 200 700 3 4 3.9 328 39.5
TCJC156M035#0200E C 15 35 105 52.5 6 200 900 3 3 5.8 116 30.3
TCJD226M035#0100E D 22 35 105 77 6 100 1500 2 3 8.5 94 27.1
TCJD336M035#0070E D 33 35 105 115.5 6 70 1800 2 3 12.8 141 40.7
TCNX476M035#0150E X 47 35 105 165 10 150 1100 3 4 18.2 387 58.0
TCNZ476M035#0100E Z 47 35 105 165 10 100 1300 3 4 18.2 387 58.0
TCNZ476M035#0150E Z 47 35 105 165 10 150 1100 3 4 18.2 387 58.0
TCN4107M035#0100E 4 100 35 105 350 10 100 1380 2 3 38.8 435 87.1
TCN8107M035#0100E 8 100 35 105 350 10 100 1380 2 3 38.8 435 87.1
50 Volt @ 85°C 50 Volt @ 85°C
TCJC685M050#0200E C 6.8 50 105 34 8 200 900 3 3 5.4 108 28.2
TCJD106M050#0120E D 10 50 105 50 10 120 1400 3 3 8.0 87 25.3
TCJE156M050#0070E E 15 50 105 75 6 70 1900 3 3 11.9 93 38.0
Energy is calculated by this formula (consider derating factor): Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient
Energy = ½ C x ((Vr x X)2 – Vx2) temperature of +25ºC. Capacitance is measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured
where C = Capacitance at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical
Vr = Rated Voltage weight and composition see page 259.
X = Recommended derating factor NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings in the same case size, to the same
Vx= 3V (invariable) reliability standards.
063022

J-CAP™ Series
110121

J-CAP™ Series
Apply rated voltage (Ur) at 85ºC and /or 2/3 rated DCL 1.25 x initial limit
voltage (Ur) at 125ºC for 2000 hours through a circuit
Store at 125ºC, no voltage applied, for 2000 hours. DCL 2 x initial limit
ΔC/C within +30/-20% of initial value
1 +20 15
Temperature 2 -55 15 DCL IL* n/a IL* 10 x IL* 12.5 x IL* IL*
3 +20 15
Stability 4 +85 15 ΔC/C n/a +0/-20% ±5% +20/-0% +30/-0% ±5%
5 +125 15
Apply 1.3x 0.67x rated voltage (Ur) at 125ºC for 1000 DCL initial limit
within +10/-20% of initial value for Vr ≤ 10V
Voltage discharge) through a charge / discharge resistance of ΔC/C
1000Ω within +20/-30% of initial value for Vr ≥ 16V
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
110121

J-CAP™ Series
Apply rated voltage (Ur) at 85ºC for 2000 hours
CATEGORIES). And / or apply rated voltage (Ur) within +10/-20% of initial value for Vr ≤ 16V
Endurance (CATEGORY 2) or 0.8x rated voltage (CATEGORY ΔC/C
3) at 105°C for 2000 hours through a circuit within ±20% of initial value for Vr ≥ 20V
impedance of ≤0.1Ω/V. Always stabilize at room DF 1.5 x initial limit
Store at 105ºC, no voltage applied, for 2000
Storage Life hours. Stabilize at room temperature for 1-2 hours ΔC/C
within ±20% of initial value for Vr ≥ 20V
before measuring.
1 +20 15
Stability 4 +85 15 ΔC/C n/a +0/-20% ±5% +20/-0% +30/-0% ±5%
5 +105 15
Surge Voltage CATEGORY 3 for 1000 cycles of duration 6 min (30 within +10/-20% of initial value for Vr ≤ 16V
sec charge, 5 min 30 sec discharge) through a charge ΔC/C
/ discharge resistance of 1000Ω
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
110121

J-CAP™ Series
Apply rated voltage (Ur) at 85ºC for 2000 hours
through a circuit impedance of ≤0.1Ω/V. Stabilize within +10/-20% of initial value for Vr ≤ 16V
Endurance at room temperature for 1-2 hours before ΔC/C
measuring.
Store at 85ºC, no voltage applied, for 2000 hours.
Storage Life Stabilize at room temperature for 1-2 hours ΔC/C
before measuring.
Step Temperature°C Duration(min) +20ºC -55ºC +20ºC +85ºC +20ºC
1 +20 15
Temperature 2 -55 15 DCL IL* n/a IL* 10 x IL* IL*
Stability 3 +20 15 ΔC/C n/a +0/-20% ±5% +20/-0% ±5%
4 +85 15
5 +20 15 DF IL* 1.5 x IL* IL* 1.5 x IL* IL*
Apply 1.3x rated voltage (Ur) at 85ºC for 1000 cycles DCL initial limit
Surge of duration 6 min (30 sec charge, 5 min 30 sec
Voltage discharge) through a charge / discharge resistance ΔC/C
of 1000Ω within +20/-30% of initial value for Vr ≥ 20V
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
110121

J-CAP™ Series
010521

F38 Series – Miniature - Undertab
F38 Series
Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors
FEATURES
• Compliant to the RoHS3 directive 2015/863/EU LEAD-FREE COMPATIBLE
• SMD Facedown COMPONENT
APPLICATIONS
• Smartphone • Bulk Decoupling of SoC
• Tablet PC (System on Chip)
• Wireless Module
• Portable Game

Code Special Code EIA Code EIA Metric L W1 W2 H S1 S2
1.60 +0.20 0.85 +0.20
-0.10 0.65±0.10 0.80±0.10 0.50±0.10 0.60±0.10
M 0603 1608-09
-0.10
(0.063 +0.008
-0.004 ) (0.033 +0.008
-0.004 ) (0.026±0.004) (0.031±0.004) (0.020±0.004) (0.024±0.004)
1.60 +0.20
-0.10 0.85 +0.20
-0.10 0.65±0.10 1.00 Max. 0.50±0.10 0.60±0.10
M AXE 0603 1608-10
(0.063 +0.008
-0.004 ) (0.033 +0.008
-0.004 ) (0.026±0.004) (0.039 Max.) (0.020±0.004) (0.024±0.004)
2.00 -0.10
+0.20
1.25 +0.20
-0.10 0.90±0.10 0.80±0.10 0.50±0.10 1.00±0.10
S 0805 2012-09
(0.079 +0.008
-0.004 ) (0.049 +0.008
-0.004 ) (0.035±0.004) (0.031±0.004) (0.020±0.004) (0.039±0.004)
2.00 +0.20 1.25 +0.20
-0.10 0.90±0.10 0.80 Max. 0.50±0.10 1.00±0.10
S H8Z 0805 2012-08
-0.10
(0.079 +0.008
-0.004 ) (0.049 +0.008
-0.004 ) (0.035±0.004) (0.031 Max.) (0.020±0.004) (0.039±0.004)
1.10±0.05 0.60±0.05 0.35±0.05 0.55±0.05 0.30±0.05 0.50±0.05
U 0402 1106-06
(0.043±0.002) (0.024±0.002) (0.014±0.002) (0.022±0.002) (0.012±0.002) (0.020±0.002)
L W1 MARKING
H
U CASE M CASE S CASE
*Capacitance
Code
W2 A Js
S1 S2 S1 Rated Voltage Rated Voltage
Code Code
HOW TO ORDER
F38 1A 225 M M
Type Rated Capacitance Tolerance Case Packaging Special Code

Voltage Code M=±20% Size AXE = Rated temperature 60°C and H
pF code: 1st two digits See Reel Dia Tape Width dimension 1.0mm Max.
represent significant figures, table (φ180) (mm) AXEH3 = Rated temperature 60°C and H
3rd digit represents multiplier above A 8 dimension 1.0mm Max., Low
ESR
LZT = Rated temperature 60°C
LZTH1 = Rated temperature 60°C, Low
ESR
AH1, AH2,
TECHNICAL SPECIFICATIONS AH3 =
Low ESR
H8Z = H dimension 0.8mm Max.
Rated Range: +85°C or +60°C (*2)
Dissipation Factor: Refer to next page (120Hz)
ESR 100kHz: Refer to next page (120Hz)
Leaking Current: Refer to next page
At 20ºC after application of rated voltage for 5 minutes
Provided that:
Termination Finish: M, S case: Gold Plating (standard), U case: Sn Plating (standard)
*2 LZT and AXE: Rated temperature +60°C, Surge and Endurance test temperature +60°C
011822

F38 Series
CAPACITANCE AND RATED VOLTAGE RANGE THE CORRELATIONS AMONG RATED
(LETTER DENOTES CASE SIZE) VOLTAGE, SURGE VOLTAGE
*Cap
AND DERATED VOLTAGE
4V 6.3V 8V 10V 16V 25V 30V 35V 38V
μF Code Code
(0G) (0J) (0K) (1A) (1C) (1E) (1S) (1V) (1X) F38 (Standard)
1.0 105 U S A Rated Voltage (V) ≤85°C 6.3 8 10 16 25 30 35 38
2.2 225 M M J 85°C Surge Voltage (V) 8 10 13 21 32 39 46 49
3.3 335 S N 105°C Derated Voltage (V) 5 6.3 8 13 20 24 28 30
4.7 475 U M/S S S S
10 106 M/M(AH1,AH2)/S/U M/M(AH1)/S S a
M/M(AH3,AH1)/S/
22 226 M*4/S j F38-LZT, F38-AXE
S(AH1)
33 336 M**/S S*** S** n Rated Voltage (V) ≤60°C 4 6.3 10
M*4/M*4(H3)/S/ 60°C Surge Voltage (V) 5.2 8 13
47 476 S S** s
S(AH1)/S*** 85°C Derated Voltage (V) 2.8 4.5 7.2
68 686 S** w 105°C Derated Voltage (V) 2 3.3 5
100 107 S** S**/S**(H1) A
Released ratings, (Low ESR)
Engineering Samples - Please Contact KYOCERA AVX
*4 (AXE) Rated temperature 60ºC and H dimension 1.0mm Max. Please contact KYOCERA AVX when you need detail
spec.
** (LZT) Rated temperature 60ºC. Please contact KYOCERA AVX when you need detail spec.
*** (H8Z) H dimension 0.8mm Max.

ESR @ 100kHz RMS Current (mA)
Capacitance Rated DF @ *3 ΔC/C
Part Number Case Size DCL (µA) 100kHz MSL
(µF) Voltage (V) 120Hz (%) 45°C 60°C 85°C 105°C (%)
(mΩ)
4 Volt
F380G107MSALZT S 100 4 80.0 10 200 474 332 – 237 * 3
6.3 Volt
F380J105MUA U 1 6.3 0.6 6 1500 100 – 70 50 * 3
F380J475MUA U 4.7 6.3 20.0 10 1500 100 – 70 50 * 3
F380J106MMA M 10 6.3 10.0 8 500 224 – 157 112 * 3
F380J106MMAAH1 M 10 6.3 10.0 8 300 289 – 202 144 * 3
F380J106MMAAH2 M 10 6.3 10.0 8 200 354 – 247 177 * 3
F380J106MSA S 10 6.3 6.3 10 250 424 – 297 212 * 3
F380J106MUA U 10 6.3 20.0 10 1500 100 – 70 50 * 3
F380J226MMA M 22 6.3 13.9 10 500 224 – 157 112 * 3
F380J226MMAAH3 M 22 6.3 13.9 10 300 289 – 202 144 * 3
F380J226MMAAH1 M 22 6.3 13.9 10 200 354 – 247 177 * 3
F380J226MSA S 22 6.3 13.9 10 200 474 – 332 237 * 3
F380J226MSAAH1 S 22 6.3 13.9 10 150 548 – 383 274 * 3
F380J336MMALZT M 33 6.3 41.6 10 500 224 157 – 112 * 3
F380J336MSA S 33 6.3 20.8 10 200 474 – 332 237 * 3
F380J476MMAAXE M 47 6.3 59.2 10 500 224 157 – 112 * 3
F380J476MMAAXEH3 M 47 6.3 59.2 10 300 289 202 – 144 * 3
F380J476MSA S 47 6.3 29.6 10 200 474 – 332 237 * 3
F380J476MSAAH1 S 47 6.3 29.6 10 150 548 – 383 274 * 3
F380J476MSAH8Z S 47 6.3 29.6 10 200 474 – 332 237 * 3
F380J686MSALZT S 68 6.3 86.0 10 200 474 332 – 237 * 3
F380J107MSALZT S 100 6.3 126.0 10 200 474 332 – 237 * 3
F380J107MSALZTH1 S 100 6.3 126.0 10 150 548 383 – 274 * 3
8 Volt
F380K336MSAH8Z S 33 8 26.4 10 200 474 – 332 237 * 3
F380K476MSA S 47 8 37.6 10 200 474 – 332 237 * 3
10 Volt
F381A225MMA M 2.2 10 10.0 6 500 224 – 157 112 * 3
F381A475MMA M 4.7 10 10.0 6 500 224 – 157 112 * 3
F381A475MSA S 4.7 10 4.7 10 300 387 – 271 194 * 3
F381A106MMA M 10 10 10.0 15 500 224 – 157 112 * 3
F381A106MMAAH1 M 10 10 10.0 15 300 289 – 202 144 * 3
F381A106MSA S 10 10 10.0 6 200 474 – 332 237 * 3
F381A226MMAAXE M 22 10 44.0 10 500 224 157 – 112 * 3
F381A226MSA S 22 10 22.0 10 200 474 – 332 237 * 3
F381A336MSALZT S 33 10 99.0 10 200 474 332 – 237 * 3
F381A476MSALZT S 47 10 94.0 10 200 474 332 – 237 * 3
16 Volt
F381C106MSA S 10 16 16.0 10 500 300 - 210 150 * 3
053122

F38 Series
ESR @ 100kHz RMS Current (mA)
Capacitance Rated DF @ *3 ΔC/C
Part Number Case Size DCL (µA) 100kHz MSL
(µF) Voltage (V) 120Hz (%) 45°C 60°C 85°C 105°C (%)
(mΩ)
25 Volt
F381E225MMA M 2.2 25 10.0 10 500 224 – 157 112 * 3
F381E475MSA S 4.7 25 11.8 10 500 300 – 210 150 * 3
30 Volt
F381S475MSA S 4.7 30 14.1 10 500 300 – 210 150 * 3
35 Volt
F381V335MSA S 3.3 35 11.6 10 500 300 - 210 150 * 3
38 Volt
F381X105MSA S 1 38 3.8 10 500 300 - 210 150 * 3
Item All Case (%)
Damp Heat, steady state -20 to +30
Rapid change of temperature ±20
Surge ±20
Endurance ±20
RECOMMENDED DEREATING FACTOR

Voltage and temperature derating as percentge of Vr 100%
F38 LZT, AXE

100% 100% 80%
95% Rated Voltage Rated Voltage
90% 80%
Recommended Applications Recommended Applications
85% 50%
Voltage for Vr ≤6.3V Voltage
80% 80% 60% 40%
Recommended Applications
75%
Voltage for Vr ≥8V 72%
70% 40%
65%
64%
60% 20%
- 55ºC 85ºC 105ºC
55% -55ºC 0ºC 60ºC 105ºC
50%
0%
QUALIFICATION TABLE
F38 series (Temperature Range -55ºC to +105ºC)

TEST
Condition
Damp Heat Capacitance Change ........... Refer to the table above (*3)
(Steady State) Dissipation Factor ................ 200% or less of initial specified value
Leakage Current .................. 300% or less of Initial specified value
Capacitance Change ........... Refer to the table above (*3)
Temperature Cycles
Dissipation Factor ................ 200% or less of initial specified value
Leakage Current .................. 400% or less of initial specified value
5 seconds reflow at 260°C
Resistance to Capacitance Change ........... Refer to the table above (*3)
Soldering Heat Dissipation Factor ................ 200% or less of initial specified value
After application of surge voltage in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF,
for 1000 successive test cycles at 85ºC or 60°C (*2), capacitors shall meet the characteristic requirements in the table above.
Surge Capacitance Change ........... Refer to the table above (*3)
After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C or 60°C (*2),
Endurance Capacitance Change ........... Refer to the table above (*3)
Shear Test has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor
its sign at the terminal electrode.
Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of
the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a
Terminal Strength
specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be
*2 LZT and AXE: Rated temperature 60°C, Surge and Endurance test temperature 60°C
060822

F38 Series
010521

TCO Series – High Temperature Automotive Polymer
Chip Capacitors
TCO Series
High Temperature Automotive Polymer Chip Capacitors
FEATURES
• Robust Design for Automotive Applications LEAD-FREE COMPATIBLE
• Meets Requirements of AEC-Q200 COMPONENT
• -55 to +150°C Operation Temperature

• Humidity 85°C/85%RH, Vr, 1000 Hours
• Basic Reliability 1%/1000hrs@85°C Vr with 60% Confidence Level
• DCL 0.1 CV
• 3x reflow 260°C Compatible
APPLICATIONS
DC/DC converters, Telecommunication (coupling/decoupling), Industrial & special,
Automotive (body electronics, cabin controls, infotainment, comfort, after market etc)
Not recommended for use of conductive polymer parts in high power applications. For
more information please see KYOCERA AVX automotive application guide at
kyocera-avx.com, or contact manufacturer.
MARKING
Polymer Logo
KYOCERA AVX's qualification of TCO capacitors meets requirements of AEC-Q200. TCO
series is manufactured in an IATF 16949 certified facility.

EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012)
Code S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
HOW TO ORDER
TCO D 106 M 050 # 0150 E
See table pF code: 1st two digits M = ±20% 025 = 25Vdc R = Pure Tin 7" Reel Character
above represent significant figures, 050 = 50Vdc S = Pure Tin 13" Reel E = Black resin
3rd digit represents multiplier
Capacitance Range: 10 μF to 33μF
053122

TCO Series
Capacitance Rated Voltage DC ( VR ) @ 105ºC

μF Code 25V (E) 35V (V) 50V (T)
10 106 D(150)
15 156
22 226
33 336 D(100)

Engineering Samples - please contact KYOCERA AVX
Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher volage ratings in the same case size, to the same reliability standards.
Maximum DCL DF ESR Max 100kHz RMS Current (mA) Humidity

Case Capacitance Rated
Part Number Operating Temp. Max Max @ 100kHz 85°C/85% RH, MSL
Size (μF) Voltage (V) 45ºC 85ºC 105ºC 125ºC 150ºC
(°C) (μA) (%) (mΩ) Vr (hrs)
25 Volt
TCOD336M025#0100E D 33 25 150 82.5 10 100 1500 1050 675 375 225 1000 3
50 Volt
TCOD106M050#0150E D 10 50 150 50 10 150 1225 857 551 306 184 1000 3

All technical data relates to an ambient temperature of +25C.
Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts.
ESR allowed to move up to 1.25 times catalog limit post mounting.

Voltage and temperature
derating as percentage of Vr
Rated Operating Temperature

voltage ≤85°C 105°C 150°C
≤10V 90% 90% 60%
≥16V 80% 80% 54%
120321

TCO Series
QUALIFICATION TABLE
TCO series (Temperature range -55ºC to 150ºC)
TEST
Apply rated voltage (Ur) at 105°C for 2000hrs and DCL 2 x initial limit
2/3 rated voltage (Ur) at 150°C for 1000 hours
Endurance ΔC/C within +10/-20% of initial value
through a circuit impedance of ≤0.1Ω/V. Stabilize at
room temperature for 1-2 hours before measuring. DF 2 x initial limit
Store at 150°C, no voltage applied, for 1000 hours. DCL 2x initial limit
measuring. DF 2 x initial limit
Apply rated voltage (Ur) at 85°C, 85% relative DCL 2 x initial limit
humidity for 1000 hours. Stabilize at room
Biased Humidity ΔC/C within +35/-5% of initial value
+20ºC -55ºC +20ºC +105ºC +150ºC +20ºC
1 +20 15
Stability 4 +105 15 ΔC/C n/a ±20% ±5% ±20% ±30% ±5%
5 +150 15
6 +20 15 DF IL* IL* IL* 1.5 x IL* 1.5 x IL* IL*
DCL initial limit
Apply 1.3x 2/3x rated voltage (Ur) at 150°C for ΔC/C
Surge Voltage within +20/-30% of initial value for Vr ≥ 16V
1000 cycles, charge / discharge resistance 33Ω.
initial limit for Vr ≤ 10V
DF
1.25x initial limit for Vr ≥ 16V
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
For use outside of recommended conditions and special request, please contact KYOCERA AVX.
042120

TCO Series
010521

TCQ Series – Automotive - J-Lead
TCQ Series
Automotive Conductive Polymer Chip Capacitors
FEATURES
• Robust Design for Automotive Applications
• Meets Requirements of AEC-Q200 LEAD-FREE COMPATIBLE
COMPONENT
• Humidity 85°C/85%RH, Vr, 1000 hours
• Basic Reliability 1%/1000hrs@85°C Vr with 60% Confidence Level
• -55 to +125°C Operation Temperature
• Full Voltage Range: 2.5-50V
• DCL 0.1 CV
APPLICATIONS
DC/DC converters, Telecommunication (coupling/decoupling), Industrial & special, Automotive
(body electronics, cabin controls, infotainment, comfort, after market etc)
Not recommended for use of conductive polymer parts in high power applications. For more
information please see KYOCERA AVX automotive application guide at kyocera-avx.com, or
contact manufacturer.
KYOCERA AVX's qualification of TCQ capacitors meets requirements of AEC-Q200. TCQ series
MARKING is manufactured in an IATF 16949 certified facility.
B, D, E, U, Y CASE
Polymer LOGO Capacitance Value in pF
227 = 220µF CASE DIMENSIONS: millimeters (inches)
Polarity
A = 10V
Code
EIA
Code
EIA
Metric
L±0.20
(0.008)
W+0.20 (0.008) H+0.20 (0.008)
-0.10 (0.004) -0.10 (0.004)
W1±0.20
(0.008)
A+0.30 (0.012)
-0.20 (0.008)
S Min.
(Anode+)
XXXXX ID Code B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
U 2924 7361-43 7.30 (0.287) 6.10 (0.240) 4.10 (0.162) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173)
Y 2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
HOW TO ORDER
TCQ B 476 M 006 # 0070 E
See table pF code: 1st two digits M = ±20% 002 = 2.5Vdc R = Pure Tin 7" Reel Character
above represent significant figures, 004 = 4Vdc S = Pure Tin 13" Reel E = Black resin
3rd digit represents multiplier 006 = 6.3Vdc
(number of zeros to follow) 010 = 10Vdc
016 = 16Vdc
020 = 20Vdc
025 = 25Vdc
035 = 35Vdc
050 = 50Vdc
environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum
temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating,
ripple current and current surges. Please reference the KYOCERA AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance.
053122

TCQ Series
Capacitance Rated Voltage DC (VR) @ 105°C
μF Code 2.5 (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
2.2 225 B(300)
3.3 335 B(300)
4.7 475 B(150,200)
10 106 B(150) D(70) D(90)
15 156 B(90) B(150) D(70) D(125)
22 226 B(70) B(70) B(70) D(70) D(100) D(100)
33 336 B(70) B(70) D(70),Y(70) D(70) D(60, 100) E(65), U(70)
47 476 B(70) B(70) D(70),Y(70) D(70),Y(70) E(50) E(75), U(70)
68 686 B(70) D(25,40) D(70) E(60)
100 107 B(55,70) B(55, 70) D(25,40) E(40) U(70)
150 157 D(25,40) D(25) E(25,40)
220 227 D(25),Y(25) D(25) D(25)
330 337 D(25) D(25)
470 477 D(25)

Rated Maximum ESR Max 100kHz RMS Current (mA) Humidity
Case Capacitance DCL Max DF Max
Part Number Voltage Operating Temp. @ 100kHz 85°C/85% MSL
Size (μF) (μA) (%) 45ºC 85ºC 105ºC 125ºC
(V) (°C) (mΩ) RH, Vr (hrs)
2.5 Volt
TCQB107M002#0055E B 100 2.5 125 25 6 55 1508 1055 678 377 1000 3
TCQB107M002#0070E B 100 2.5 125 25 6 70 1336 935 601 334 1000 3
4 Volt
TCQB107M004#0055E B 100 4 125 40 8 55 1508 1055 678 377 1000 3
TCQB107M004#0070E B 100 4 125 40 8 70 1336 935 601 334 1000 3
TCQD227M004#0025E D 220 4 125 88 6 25 3000 2100 1350 750 1000 3
TCQY227M004#0025E Y 220 4 125 88 6 25 2720 1904 1224 680 1000 3
TCQD337M004#0025E D 330 4 125 132 6 25 3000 2100 1350 750 1000 3
TCQD477M004#0025E D 470 4 125 188 6 25 3000 2100 1350 750 1000 3
6.3 Volt
TCQB226M006#0070E B 22 6.3 125 13.2 6 70 1336 935 601 334 1000 3
TCQB336M006#0070E B 33 6.3 125 19.8 6 70 1336 935 601 334 1000 3
TCQB476M006#0070E B 47 6.3 125 28.2 6 70 1336 935 601 334 1000 3
TCQB686M006#0070E B 68 6.3 125 40.8 8 70 1336 935 601 334 1000 3
TCQD157M006#0025E D 150 6.3 125 90 6 25 3000 2100 1350 750 1000 3
TCQD157M006#0040E D 150 6.3 125 90 6 40 2372 1660 1067 593 1000 3
TCQD227M006#0025E D 220 6.3 125 132 6 25 3000 2100 1350 750 1000 3
TCQD337M006#0025E D 330 6.3 125 198 6 25 3000 2100 1350 750 1000 3
10 Volt
TCQB226M010#0070E B 22 10 125 22 6 70 1336 935 601 334 1000 3
TCQB336M010#0070E B 33 10 125 33 6 70 1336 935 601 334 1000 3
TCQB476M010#0070E B 47 10 125 47 6 70 1336 935 601 334 1000 3
TCQD686M010#0025E D 68 10 125 68 6 25 3000 2100 1350 750 1000 3
TCQD686M010#0040E D 68 10 125 68 6 40 2372 1660 1067 593 1000 3
TCQD107M010#0025E D 100 10 125 100 6 25 3000 2100 1350 750 1000 3
TCQD107M010#0040E D 100 10 125 100 6 40 2372 1660 1067 593 1000 3
TCQD157M010#0025E D 150 10 125 150 6 25 3000 2100 1350 750 1000 3
TCQD227M010#0025E D 220 10 125 220 6 25 3000 2100 1350 750 1000 3
16 Volt
TCQB156M016#0090E B 15 16 125 24 8 90 1179 825 530 295 1000 3
TCQB226M016#0070E B 22 16 125 35.2 8 70 1336 935 601 334 1000 3
TCQD336M016#0070E D 33 16 125 52.8 6 70 1793 1255 807 448 1000 3
TCQY336M016#0070E Y 33 16 125 52.8 6 70 1626 1138 732 406 1000 3
TCQD476M016#0070E D 47 16 125 75.2 6 70 1793 1255 807 448 1000 3
TCQY476M016#0070E Y 47 16 125 75.2 6 70 1626 1138 732 406 1000 3
TCQD686M016#0070E D 68 16 125 109 8 70 1793 1255 807 448 1000 3
TCQE157M016#0025E E 150 16 125 240 8 25 3162 2214 1423 791 1000 3
TCQE157M016#0040E E 150 16 125 240 10 40 2500 1750 1125 625 1000 3
20 Volt
TCQB106M020#0150E B 10 20 125 20 8 150 913 639 411 228 1000 3
TCQB156M020#0150E B 15 20 125 30 8 150 913 639 411 228 1000 3
TCQD226M020#0070E D 22 20 125 44 6 70 1793 1255 807 448 1000 3
TCQD336M020#0070E D 33 20 125 66 8 70 1793 1255 807 448 1000 3
053122

TCQ Series
Rated Maximum ESR Max 100kHz RMS Current (mA) Humidity

Case Capacitance DCL Max DF Max
Part Number Voltage Operating Temp. @ 100kHz 85°C/85% MSL
Size (μF) (μA) (%) 45ºC 85ºC 105ºC 125ºC
(V) (°C) (mΩ) RH, Vr (hrs)
TCQD476M020#0070E D 47 20 125 94 6 70 1793 1255 807 448 1000 3
TCQY476M020#0070E Y 47 20 125 94 6 70 1626 1138 732 406 1000 3
TCQE107M020#0040E E 100 20 125 200 10 40 2500 1750 1125 625 1000 3
25 Volt
TCQD156M025#0070E D 15 25 125 37.5 6 70 1793 1255 807 448 1000 3
TCQD226M025#0100E D 22 25 125 55 8 100 1500 1050 675 375 1000 3
TCQD336M025#0060E D 33 25 125 82.5 10 60 1936 1356 871 484 1000 3
TCQD336M025#0100E D 33 25 125 82.5 8 100 1500 1050 675 375 1000 3
TCQE476M025#0050E E 47 25 125 117.5 10 50 2236 1565 1006 559 1000 3
TCQE686M025#0060E E 68 25 125 170 10 60 2041 1429 919 510 1000 3
TCQU107M025R0070E U 100 25 125 250 12 70 2330 1631 1048 582 1000 3
35 Volt
TCQB475M035#0150E B 4.7 35 125 16.5 8 150 913 639 411 226 1000 3
TCQB475M035#0200E B 4.7 35 125 16.5 8 200 791 553 356 198 1000 3
TCQD106M035#0070E D 10 35 125 35 6 70 1793 1255 807 448 1000 3
TCQD156M035#0125E D 15 35 125 52.5 8 125 1342 939 604 335 1000 3
TCQD226M035#0100E D 22 35 125 77 8 100 1500 1050 675 375 1000 3
TCQU336M035R0070E U 33 35 125 115.5 12 70 2330 1631 1048 582 1000 3
TCQE336M035#0065E E 33 35 125 115.5 10 65 1961 1373 883 490 1000 3
TCQE476M035#0075E E 47 35 125 164.5 10 75 1826 1278 822 456 1000 3
TCQU476M035R0070E U 47 35 125 164.5 12 70 2330 1631 1048 582 1000 3
50 Volt
TCQB225M050#0300E B 2.2 50 125 11 8 300 645 452 290 161 1000 3
TCQB335M050#0300E B 3.3 50 125 16.5 8 300 645 452 290 161 1000 3
TCQD106M050#0090E D 10 50 125 50 10 90 1581 1107 712 395 1000 3
Moisture Sensitivity Level (MSL) is defined according to J-STD-020. ESR allowed to move up to 1.25 times catalog limit post mounting.
All technical data relates to an ambient temperature of +25ºC. Capacitance and For typical weight and composition see page 259.
DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured NOTE: KYOCERA AVX reserves the right to supply higher voltage ratings or
at rated voltage after 5 minutes. tighter tolerance part in the same case size, to the same reliability
standards.

Voltage and temperature
derating as percentage of Vr 100%
For Vr ≤ 10V
100%
For Vr ≥ 16V

90% 90%
85% Recommended 85%
Rated Operating Temperature 80% Application Voltage 80%
voltage ≤85°C 105°C 125°C 75% 75% Recommended

≤10V 90% 90% 60% 70% 70% Application Voltage
67% 67%
65% 65%
≥16V 80% 80% 54% 60% 60% 60%
55% 55% 54%
50% 50%
-55% 85ºC 105ºC 125ºC -55% 85ºC 105ºC 125ºC
121321

TCQ Series
QUALIFICATION TABLE
TCQ series (Temperature range -55ºC to 125ºC)
TEST
Apply 2/3 rated voltage (Ur) at 125ºC for 2000 hours DCL 2 x initial limit
Endurance through a circuit impedance of ≤0.1Ω/V. Stabilize at ΔC/C within +10/-20% of initial value
room temperature for 1-2 hours before measuring. DF 2 x initial limit
Store at 125ºC, no voltage applied, for 2000 hours. DCL 2x initial limit
measuring. DF 2 x initial limit
Apply rated voltage (Ur) at 85ºC, 85% relative DCL 2 x initial limit
humidity for 1000 hours. Stabilize at room
Biased Humidity ΔC/C within +35/-5% of initial value
+20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
1 +20 15
Stability 4 +85 15 ΔC/C n/a ±20% ±5% ±20% ±30% ±5%
5 +125 15
6 +20 15 DF IL* IL* IL* 1.2 x IL* 1.5 x IL* IL*
DCL initial limit
Apply 1.3x 2/3x rated voltage (Ur) at 125ºC for
1000 cycles of duration 6 min (30 sec charge, 5 min ΔC/C
Surge Voltage within +20/-30% of initial value for Vr ≥ 16V
30 sec discharge) through a charge / discharge
resistance of 1000Ω initial limit for Vr ≤ 10V
DF
1.25x initial limit for Vr ≥ 16V
DCL initial limit
Mechanical
Shock
DF initial limit
DCL initial limit
DF initial limit
*Initial Limit
For use outside of recommended conditions and special request, please contact KYOCERA AVX.
111920

TCQ Series
010521

SECTION 3: LEADED TANTALUM
Introduction
Introduction
Foreword
KYOCERA AVX offers a broad line of solid Tantalum capacitors in a And if the customer requirements are outside our standard testing,
wide range of sizes, styles, and ratings to meet any design needs. This KYOCERA AVX will work with you to define and implement a test or
catalog combines into one source KYOCERA AVX’s leaded tantalum screening plan.
capacitor information from its worldwide tantalum operations. KYOCERA AVX is determined to become the world leader in tantalum
The TAP/TEP is rated for use from -55°C to +85°C at rated voltage capacitor technology and has made, and is continuing to make,
and up to +125°C with voltage derating. There are three preferred significant investments in equipment and research to reach that end.
wire forms to choose from which are available on tape and reel, and We believe that the investment has paid off with the devices shown
in bulk for hand insertion. on the following pages.
KYOCERA AVX has a complete tantalum applications service
available for use by all our customers. With the capability to
prototype and mass produce solid tantalum capacitors in special
configurations, almost any design need can be fulfilled.
DIPPED RADIAL CAPACITORS
SOLID TANTALUM RESIN DIPPED

SERIES TAP/TEP
The TAP/TEP resin dipped series of miniature tantalum capacitors is available for individual needs in both commercial and professional
applications. From computers to automotive to industrial, KYOCERA AVX has a dipped radial for almost any application.
Tantalum Graphite
Resin encapsulation
Tantalum wire
Terminal Wire
Silver
Solder
Manganese
dioxide
Tantalum
pentoxide

TAP/TEP Series Wire Form Outline
Wire Form Outline
SOLID TANTALUM RESIN DIPPED TAP/TEP
Preferred Wire Forms
D D D
Figure 1 Figure 2 Figure 3
Wire Form C Wire Form B Wire Form S
2.0(0.08)
H H1 + 4 (0.16) max H1
+ max
+
L L
S L S
S
d d
2.0 (0.079) 2 (0.079)
d
min min
Non-Preferred Wire Forms (Not recommended for new designs)

Figure 4 D Figure 5 Figure 6 D
D
H + 3.8 (0.15) H1 max H

max +0.118
+ (3.0)
L 0.079 (2)
min L
1.10 +0.25
-0.10 L
(0.4 +0.010 S S
-0.004 )
S d d
Wire Form F Wire Form D Wire Form G
DIMENSIONS millimeters (inches)

Packaging
Wire Form Figure Case Size L (see note 1) S d
Suffixes Available*
Preferred Wire Forms
CCS Bulk
16.0±4.00 5.00±1.00 0.50±0.05
C Figure 1 A - R* CRW Tape/Reel
(0.630±0.160) (0.200±0.040) (0.020±0.002)
CRS Tape/Ammo
16.0±4.00 5.00±1.00 0.50±0.05 BRW Tape/Reel
B Figure 2 A - J*
(0.630±0.160) (0.200±0.040) (0.020±0.002) BRS Tape/Ammo
SCS Bulk
16.0±4.00 2.50±0.50 0.50±0.05
S Figure 3 A - J* SRW Tape/Reel
(0.630±0.160) (0.100±0.020) (0.020±0.002)
SRS Tape/Ammo
Non-Preferred Wire Forms (Not recommended for new designs)
3.90±0.75 5.00±0.50 0.50±0.05
F Figure 4 A-R FCS Bulk
(0.155±0.030) (0.200±0.020) (0.020±0.002)
DCS Bulk
16.0±4.00 2.50±0.75 0.50±0.05
D Figure 5 A - H* DTW Tape/Reel
(0.630±0.160) (0.100±0.020) (0.020±0.002)
DTS Tape/Ammo
16.0±4.00 3.18±0.50 0.50±0.05
G Figure 6 A-J GSB Bulk
(0.630±0.160) (0.125±0.020) (0.020±0.002)
Similar to 16.0±4.00 6.35±1.00 0.50±0.05
H A-R HSB Bulk
Figure 1 (0.630±0.160) (0.250±0.040) (0.020±0.002)
Notes: (1) Lead lengths can be supplied to tolerances other than those above and should be specified in the ordering information.
(2) For D, H, and H1 dimensions, refer to individual product on following pages.
* For case size availability in tape and reel, please refer to pages 253-254.
040920

TAP Series
SOLID TANTALUM RESIN DIPPED CAPACITORS
TAP is a professional grade device manufactured with a flame retardant coating and featuring low leakage
current and impedance, very small physical sizes and exceptional temperature stability. It is designed and
conditioned to operate to +125°C (see page 282 for voltage derating above 85°C) and is available loose or
taped and reeled for auto insertion. The 15 case sizes with wide capacitance and working voltage ranges
means the TAP can accommodate almost any application.
MAXIMUM CASE DIMENSIONS: millimeters (inches)

Wire C, F, G, H B, S, D
Case H *H1 D
A 8.50 (0.330) 7.00 (0.280) 4.50 (0.180) LEAD-FREE COMPATIBLE
B 9.00 (0.350) 7.50 (0.300) 4.50 (0.180) COMPONENT
C 10.0 (0.390) 8.50 (0.330) 5.00 (0.200)
D 10.5 (0.410) 9.00 (0.350) 5.00 (0.200)
E 10.5 (0.410) 9.00 (0.350) 5.50 (0.220)
F 11.5 (0.450) 10.0 (0.390) 6.00 (0.240)
G 11.5 (0.450) 10.0 (0.390) 6.50 (0.260)
H 12.0 (0.470) 10.5 (0.410) 7.00 (0.280)
J 13.0 (0.510) 11.5 (0.450) 8.00 (0.310)
K 14.0 (0.550) 12.5 (0.490) 8.50 (0.330)
L 14.0 (0.550) 12.5 (0.490) 9.00 (0.350)
M 14.5 (0.570) 13.0 (0.510) 9.00 (0.350)
N 16.0 (0.630) 9.00 (0.350)
P 17.0 (0.670) 10.0 (0.390)
R 18.5 (0.730) 10.0 (0.390)
HOW TO ORDER
TAP 475 M 035 SCS
Type Capacitance Code Capacitance Tolerance Rated DC Voltage Suffix indicating wire form
pF code: 1st two digits K = ±10% and packaging
represent significant M = ±20% (see page 246)
figures, 3rd digit represents (For J = ±5% tolerance,
multiplier (number of zeros please consult factory)
to follow)
040920

TAP Series
Capacitance Tolerance: ±20%; ±10% (±5% consult your representative for details)
Category Voltage (VC) ≤ +125ºC: 4 6.3 10 13 16 23 33
Dissipation Factor: ≤0.04 for CR 0.1-1.5μF
≤0.06 for CR 2.2-6.8μF
≤0.08 for CR 10-68μF
≤0.10 for CR 100-330μF
Reliability: 1% per 1000 hrs. at 85°C with 0.1Ω/V series impedance, 60% confidence level.
Qualification: CECC 30201 - 032

Capacitance Rated Voltage DC (VR)
μF Code 6.3V 10V 16V 20V 25V 35V 50V
0.10 104 A A
0.15 154 A A
0.22 224 A A
0.33 334 A A
0.47 474 A A
0.68 684 A B
1.0 105 A A A C
1.5 155 A A A A D
2.2 225 A A A A B E
3.3 335 A A A B B C F
4.7 475 A A B C C E G
6.8 685 A B C D D F H
10 106 B C D E E F J
15 156 C D E F F H K
22 226 D E F H H K L
33 336 E F F J J M
47 476 F G J K M N
68 686 G H L N N
100 107 H K N N
150 157 K N N
220 227 M P R
330 337 P R
Values outside this standard range may be available on request.
KYOCERA AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that ordered.
MARKING
Polarity, capacitance, rated DC voltage, and an "A" (KYOCERA AVX
logo) are laser marked on the capacitor body which is made of flame
retardant gold epoxy resin with a limiting oxygen index in excess of 30
(ASTM-D-2863).
• Polarity • Tolerance code:

• Capacitance ±20% = Standard (no marking)
• Voltage ±10% = “K” on reverse side of unit
• KYOCERA AVX
±5% = “J” on reverse side of unit
logo
040920

TAP Series
RATINGS AND PART NUMBER REFERENCE
DCL DF ESR DCL DF ESR
Case Capacitance Case Capacitance
Part Number (μA) % Max. (Ω) Part Number (μA) % Max. (Ω)
Size (μF) Size (μF)
Max. Max. @ 100 kHz Max. Max. @ 100 kHz
6.3 volt @ 85°C (4 volt @ 125°C) 25 volt @ 85°C (16 volt @ 125°C)
TAP 335(*)006 A 3.3 0.5 6 13.0 TAP 105(*)025 A 1.0 0.5 4 10.0
TAP 475(*)006 A 4.7 0.5 6 10.0 TAP 155(*)025 A 1.5 0.5 4 8.0
TAP 685(*)006 A 6.8 0.5 6 8.0 TAP 225(*)025 A 2.2 0.5 6 6.0
TAP 106(*)006 B 10 0.5 8 6.0 TAP 335(*)025 B 3.3 0.6 6 5.0
TAP 156(*)006 C 15 0.8 8 5.0 TAP 475(*)025 C 4.7 0.9 6 4.0
TAP 226(*)006 D 22 1.1 8 3.7 TAP 685(*)025 D 6.8 1.3 6 3.1
TAP 336(*)006 E 33 1.7 8 3.0 TAP 106(*)025 E 10 2.0 8 2.5
TAP 476(*)006 F 47 2.4 8 2.0 TAP 156(*)025 F 15 3.0 8 2.0
TAP 686(*)006 G 68 3.4 8 1.8 TAP 226(*)025 H 22 4.4 8 1.5
TAP 107(*)006 H 100 5.0 10 1.6 TAP 336(*)025 J 33 6.6 8 1.2
TAP 157(*)006 K 150 7.6 10 0.9 TAP 476(*)025 M 47 9.4 8 1.0
TAP 227(*)006 M 220 11.0 10 0.9 TAP 686(*)025 N 68 13.6 8 0.8
TAP 337(*)006 P 330 16.6 10 0.7 35 volt @ 85°C (23 volt @ 125°C)
10 volt @ 85°C (6.3 volt @ 125°C) TAP 104(*)035 A 0.1 0.5 4 26.0
TAP 225(*)010 A 2.2 0.5 6 13.0 TAP 154(*)035 A 0.15 0.5 4 21.0
TAP 335(*)010 A 3.3 0.5 6 10.0 TAP 224(*)035 A 0.22 0.5 4 17.0
TAP 475(*)010 A 4.7 0.5 6 8.0 TAP 334(*)035 A 0.33 0.5 4 15.0
TAP 685(*)010 B 6.8 0.5 6 6.0 TAP 474(*)035 A 0.47 0.5 4 13.0
TAP 106(*)010 C 10 0.8 8 5.0 TAP 684(*)035 A 0.68 0.5 4 10.0
TAP 156(*)010 D 15 1.2 8 3.7 TAP 105(*)035 A 1.0 0.5 4 8.0
TAP 226(*)010 E 22 1.7 8 2.7 TAP 155(*)035 A 1.5 0.5 4 6.0
TAP 336(*)010 F 33 2.6 8 2.1 TAP 225(*)035 B 2.2 0.6 6 5.0
TAP 476(*)010 G 47 3.7 8 1.7 TAP 335(*)035 C 3.3 0.9 6 4.0
TAP 686(*)010 H 68 5.4 8 1.3 TAP 475(*)035 E 4.7 1.3 6 3.0
TAP 107(*)010 K 100 8.0 10 1.0 TAP 685(*)035 F 6.8 1.9 6 2.5
TAP 157(*)010 N 150 12.0 10 0.8 TAP 106(*)035 F 10 2.8 8 2.0
TAP 227(*)010 P 220 17.6 10 0.6 TAP 156(*)035 H 15 4.2 8 1.6
TAP 337(*)010 R 330 20.0 10 0.5 TAP 226(*)035 K 22 6.1 8 1.3
16 volt @ 85°C (10 volt @ 125°C) TAP 336(*)035 M 33 9.2 8 1.0
TAP 155(*)016 A 1.5 0.5 4 10.0 TAP 476(*)035 N 47 10.0 8 0.8
TAP 225(*)016 A 2.2 0.5 6 8.0 50 volt @ 85°C (33 volt @ 125°C)
TAP 335(*)016 A 3.3 0.5 6 6.0 TAP 104(*)050 A 0.1 0.5 4 26.0
TAP 475(*)016 B 4.7 0.6 6 5.0 TAP 154(*)050 A 0.15 0.5 4 21.0
TAP 685(*)016 C 6.8 0.8 6 4.0 TAP 224(*)050 A 0.22 0.5 4 17.0
TAP 106(*)016 D 10 1.2 8 3.2 TAP 334(*)050 A 0.33 0.5 4 15.0
TAP 156(*)016 E 15 1.9 8 2.5 TAP 474(*)050 A 0.47 0.5 4 13.0
TAP 226(*)016 F 22 2.8 8 2.0 TAP 684(*)050 B 0.68 0.5 4 10.0
TAP 336(*)016 F 33 4.2 8 1.6 TAP 105(*)050 C 1.0 0.5 4 8.0
TAP 476(*)016 J 47 6.0 8 1.3 TAP 155(*)050 D 1.5 0.6 4 6.0
TAP 686(*)016 L 68 8.7 8 1.0 TAP 225(*)050 E 2.2 0.8 6 3.5
TAP 107(*)016 N 100 12.8 10 0.8 TAP 335(*)050 F 3.3 1.3 6 3.0
TAP 157(*)016 N 150 19.2 10 0.6 TAP 475(*)050 G 4.7 1.8 6 2.5
TAP 227(*)016 R 220 20.0 10 0.5 TAP 685(*)050 H 6.8 2.7 6 2.0
20 volt @ 85°C (13 volt @ 125°C) TAP 106(*)050 J 10 4.0 8 1.6
TAP 105(*)020 A 1.0 0.5 4 10.0 TAP 156(*)050 K 15 6.0 8 1.2
TAP 155(*)020 A 1.5 0.5 4 9.0 TAP 226(*)050 L 22 8.8 8 1.0
TAP 225(*)020 A 2.2 0.5 6 7.0
(*) Insert capacitance tolerance code; M for ±20%, K for ±10% and J for ±5%
TAP 335(*)020 B 3.3 0.5 6 5.5 NOTE: Voltage ratings are minimum values. KYOCERA AVX reserves the right to
TAP 475(*)020 C 4.7 0.7 6 4.5 supply higher voltage ratings in the same case size.
TAP 685(*)020 D 6.8 1.0 6 3.6
TAP 106(*)020 E 10 1.6 8 2.9
TAP 156(*)020 F 15 2.4 8 2.3
TAP 226(*)020 H 22 3.5 8 1.8
TAP 336(*)020 J 33 5.2 8 1.4
TAP 476(*)020 K 47 7.5 8 1.2
TAP 686(*)020 N 68 10.8 8 0.9
TAP 107(*)020 N 100 16.0 10 0.6
040920

TEP Series

TEP Series Tin-Lead (Sn/Pb) Finish Product
TEP is a Tin–Lead finish version of the conformally coated tantalum radial leaded capacitor (TAP), It
is a professional grade device manufactured with a flame retardant coating and featuring low leakage
current and impedance, very small physical sizes and exceptional temperature stability, available in
bulk and T&R packaging for auto insertion. The wide range of Capacitance, working voltages and
case sizes enables TEP to accommodate to almost any application.

Wire C, F, G, H B, S, D
Case H *H1 D
A 8.50 (0.335) 7.00 (0.276) 4.50 (0.177)
B 9.00 (0.354) 7.50 (0.295) 4.50 (0.177)
C 10.0 (0.394) 8.50 (0.335) 5.00 (0.197)
D 10.5 (0.413) 9.00 (0.354) 5.00 (0.197)
E 10.5 (0.413) 9.00 (0.354) 5.50 (0.217)
F 11.5 (0.453) 10.0 (0.394) 6.00 (0.236)
G 11.5 (0.453) 10.0 (0.394) 6.50 (0.256)
H 12.0 (0.472) 10.5 (0.413) 7.00 (0.276)
J 13.0 (0.512) 11.5 (0.453) 8.00 (0.315)
K 14.0 (0.551) 8.50 (0.335)
L 14.0 (0.551) 9.00 (0.354)
M 14.5 (0.571) 9.00 (0.354)
N 16.0 (0.630) 9.00 (0.354)
P 17.0 (0.669) 10.0 (0.394)
R 18.5 (0.728) 10.0 (0.394)
HOW TO ORDER
TEP 106 M 016 SCS
Type Capacitance Code Capacitance Tolerance Rated DC Voltage Suffix indicating wire form
pF code: 1st two digits K = ±10% and packaging
represent significant M = ±20% (see page 246)
figures, 3rd digit represents (For J = ±5% tolerance,
multiplier (number of zeros please consult factory)
to follow)
040920

TEP Series
Capacitance Range: 0.10 µF to 330 µF
Capacitance Tolerance: ±10%; ±20% (±5% consult your representative for details)
Category Voltage (VC) ≤ +125ºC: 4 6.3 10 13 16 23 33
Dissipation Factor: ≤0.04 for CR 0.1-1.5μF
≤0.06 for CR 2.2-6.8μF
≤0.08 for CR 10-68μF
≤0.10 for CR 100-330μF
Reliability: 1% per 1000 hrs. at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level.

Capacitance Rated Voltage DC (VR)

μF Code 6.3V 10V 16V 20V 25V 35V 50V
0.10 104 A A
0.15 154 A A
0.22 224 A A
0.33 334 A A
0.47 474 A A
0.68 684 A B
1.0 105 A A A C
1.5 155 A A A A D
2.2 225 A A A A B E
3.3 335 A A A B B C F
4.7 475 A A B C C E G
6.8 685 A B C D D F H
10 106 B C D E E F J
15 156 C D E F F H K
22 226 D E F H H K L
33 336 E F F J J M
47 476 F G J K M N
68 686 G H L N N
100 107 H K N N
150 157 K N N
220 227 M P R
330 337 P R
Values outside this standard range may be available on request.

KYOCERA AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that ordered.
MARKING
Polarity, capacitance, rated DC voltage, and an "A" (KYOCERA AVX
logo) are laser marked on the capacitor body which is made of flame
retardant gold epoxy resin with a limiting oxygen index in excess of 30
(ASTM-D-2863).
• Polarity • Tolerance code:

• Capacitance ±20% = Standard (no marking)
• Voltage ±10% = “K” on reverse side of unit
• KYOCERA AVX
±5% = “J” on reverse side of unit
logo
040920

TEP Series
RATINGS AND PART NUMBER REFERENCE
DCL DF ESR Max. DCL DF ESR Max.

Case Cap Case Cap
Part Number (μA) % (Ω) Part Number (μA) % (Ω)
Size (μF) Size (μF)
Max. Max. @100kHz Max. Max. @100kHz
TEP335(*)006 A 3.3 0.5 6 13 TEP226(*)020 H 22 3.5 8 1.8
TEP475(*)006 A 4.7 0.5 6 10 TEP336(*)020 J 33 5.2 8 1.4
TEP685(*)006 A 6.8 0.5 6 8 TEP476(*)020 K 47 7.5 8 1.2
TEP106(*)006 B 10 0.5 8 6 TEP686(*)020 N 68 10.8 8 0.9
TEP156(*)006 C 15 0.8 8 5 TEP107(*)020 N 100 16 10 0.6
TEP226(*)006 D 22 1.1 8 3.7 TEP105(*)025 A 1 0.5 4 10
TEP336(*)006 E 33 1.7 8 3 TEP155(*)025 A 1.5 0.5 4 8
TEP476(*)006 F 47 2.4 8 2 TEP225(*)025 A 2.2 0.5 6 6
TEP686(*)006 G 68 3.4 8 1.8 TEP335(*)025 B 3.3 0.6 6 5
TEP107(*)006 H 100 5 10 1.6 TEP475(*)025 C 4.7 0.9 6 4
TEP157(*)006 K 150 7.6 10 0.9 TEP685(*)025 D 6.8 1.3 6 3.1
TEP227(*)006 M 220 11 10 0.9 TEP106(*)025 E 10 2 8 2.5
TEP337(*)006 P 330 16.6 10 0.7 TEP156(*)025 F 15 3 8 2
TEP335(*)006 A 3.3 0.5 6 13 TEP226(*)025 H 22 4.4 8 1.5
TEP225(*)010 A 2.2 0.5 6 13 TEP336(*)025 J 33 6.6 8 1.2
TEP335(*)010 A 3.3 0.5 6 10 TEP476(*)025 M 47 9.4 8 1
TEP475(*)010 A 4.7 0.5 6 8 TEP686(*)025 N 68 13.6 8 0.8
TEP685(*)010 B 6.8 0.5 6 6 TEP104(*)035 A 0.1 0.5 4 26
TEP106(*)010 C 10 0.8 8 5 TEP154(*)035 A 0.15 0.5 4 21
TEP156(*)010 D 15 1.2 8 3.7 TEP224(*)035 A 0.22 0.5 4 17
TEP226(*)010 E 22 1.7 8 2.7 TEP334(*)035 A 0.33 0.5 4 15
TEP336(*)010 F 33 2.6 8 2.1 TEP474(*)035 A 0.47 0.5 4 13
TEP476(*)010 G 47 3.7 8 1.7 TEP684(*)035 A 0.68 0.5 4 10
TEP686(*)010 H 68 5.4 8 1.3 TEP105(*)035 A 1 0.5 4 8
TEP107(*)010 K 100 8 10 1 TEP155(*)035 A 1.5 0.5 4 6
TEP157(*)010 N 150 12 10 0.8 TEP225(*)035 B 2.2 0.6 6 5
TEP227(*)010 P 220 17.6 10 0.6 TEP335(*)035 C 3.3 0.9 6 4
TEP337(*)010 R 330 20 10 0.5 TEP475(*)035 E 4.7 1.3 6 3
TEP155(*)016 A 1.5 0.5 4 10 TEP685(*)035 F 6.8 1.9 6 2.5
TEP225(*)016 A 2.2 0.5 6 8 TEP106(*)035 F 10 2.8 8 2
TEP335(*)016 A 3.3 0.5 6 6 TEP156(*)035 H 15 4.2 8 1.6
TEP475(*)016 B 4.7 0.6 6 5 TEP226(*)035 K 22 6.1 8 1.3
TEP685(*)016 C 6.8 0.8 6 4 TEP336(*)035 M 33 9.2 8 1
TEP106(*)016 D 10 1.2 8 3.2 TEP476(*)035 N 47 10 8 0.8
TEP156(*)016 E 15 1.9 8 2.5 TEP104(*)050 A 0.1 0.5 4 26
TEP226(*)016 F 22 2.8 8 2 TEP154(*)050 A 0.15 0.5 4 21
TEP336(*)016 F 33 4.2 8 1.6 TEP224(*)050 A 0.22 0.5 4 17
TEP476(*)016 J 47 6 8 1.3 TEP334(*)050 A 0.33 0.5 4 15
TEP686(*)016 L 68 8.7 8 1 TEP474(*)050 A 0.47 0.5 4 13
TEP107(*)016 N 100 12.8 10 0.8 TEP684(*)050 B 0.68 0.5 4 10
TEP157(*)016 N 150 19.2 10 0.6 TEP105(*)050 C 1 0.5 4 8
TEP227(*)016 R 220 20 10 0.5 TEP155(*)050 D 1.5 0.6 4 6
TEP105(*)020 A 1 0.5 4 10 TEP225(*)050 E 2.2 0.8 6 3.5
TEP155(*)020 A 1.5 0.5 4 9 TEP335(*)050 F 3.3 1.3 6 3
TEP225(*)020 A 2.2 0.5 6 7 TEP475(*)050 G 4.7 1.8 6 2.5
TEP335(*)020 B 3.3 0.5 6 5.5 TEP685(*)050 H 6.8 2.7 6 2
TEP475(*)020 C 4.7 0.7 6 4.5 TEP106(*)050 J 10 4 8 1.6
TEP685(*)020 D 6.8 1 6 3.6 TEP156(*)050 K 15 6 8 1.2
TEP106(*)020 E 10 1.6 8 2.9 TEP226(*)050 L 22 8.8 8 1
TEP156(*)020 F 15 2.4 8 2.3
040920

TAP/TEP Series Tape & Reel

Tape and Reel Packaging
TAPE AND REEL PACKAGING FOR AUTOMATIC COMPONENT INSERTION
TAP/TEP types are all offered on radial tape, in reel or ‘ammo’ pack The tape format is compatible with EIA 468A standard for component
format for use on high speed radial automatic insertion equipment, taping set out by major manufacturers of radial automatic insertion
or preforming machines. equipment.
TAP/TEP – available in three formats. See page 254 for dimensions.
‘B’ wires for normal automatic insertion on

5mm pitch.
BRW suffix for reel
BRS suffix for ‘ammo’ pack
Available in case sizes A - J
‘C’ wires for preforming.

CRW suffix for reel
CRS suffix for ‘ammo’ pack
Available in case sizes A - R
‘S’ and ‘D’ wire for special applications,

automatic insertion on 2.5mm pitch.
SRW, DTW suffix for reel

SRS, DTS suffix for ‘ammo’ pack
Available in case sizes A - J

Tape and Reel Packaging
CASE DIMENSIONS: millimeters (inches) REEL CONFIGURATION AND

Description Code Dimension DIMENSIONS: millimeters (inches)
Feed hole pitch P 12.7 ± 0.30 (0.500 ± 0.010)
Hole center to lead P1 3.85 ± 0.70 (0.150 ± 0.030)
to be measured at bottom of
clench
5.05 ± 1.00 (0.200 ± 0.040)
for S wire
Hole center to component center P2 6.35 ± 0.40 (0.250 ± 0.020)
Change in pitch ∆p ± 1.00 (± 0.040)
Lead diameter d 0.50 ± 0.05 (0.020 ± 0.003)
Lead spacing S See wire form table
Component alignment ∆h 0 ± 2.00 (0 ± 0.080)
Feed hole diameter D 4.00 ± 0.20 (0.150 ± 0.008)
Manufactured from cardboard with plastic hub.
Tape width W 18.0 + 1.00 (0.700 + 0.040)
- 0.50 - 0.020)
Hold down tape width W1 6.00 (0.240) min.
Hold down tape position W2 1.00 (0.040) max.
Lead wire clench height H 16.0 ± 0.50 (0.630 ± 0.020)
19.0 ± 1.00 (0.750 ± 0.040)
on request
Hole position H1 9.00 ± 0.50 (0.350 ± 0.020)
Base of component height H2 18.0 (0.700) min. (S wire only)
Component height H3 32.25 (1.300) max.
Length of snipped lead L 11.0 (0.430) max.
Total tape thickness T 0.70 ± 0.20 (0.030 ± 0.001) Holding tape outside. Positive terminal leading.
Carrying card
0.50 ± 0.10 (0.020 ± 0.005)
PACKAGING QUANTITIES
For Reels For ‘Ammo’ pack For bulk products
Style Case size No. of pieces Style Case size No. of pieces Style Case size No. of pieces
A 1500 A, B, C, D 3000 A to H 1000
TAP
B, C, D 1250 TAP E, F, G 2500 J to L 500
TAP TEP
E, F 1000 TEP H, J 2000 M to R 100
TEP
G, H, J 750 K, L, M, N, P, R 1000
K, L, M, N, P, R 500
AMMO PACK DIMENSIONS GENERAL NOTES

millimeters (inches) max. Resin dipped tantalum capacitors are only available taped in the
Height 360 (14.17), width 360 (14.17), thickness 60 (2.36) range of case sizes and in the modular quantities by case size
as indicated.
Packaging quantities on tape may vary by ±1%.
040920

SECTION 4: TECHNICAL SUMMARY AND
APPLICATION GUIDELINES
Section 4: Technical Summary and Application Guidelines
INTRODUCTION The following example uses a 220μF 6V capacitor to illustrate the

point.
Tantalum capacitors are manufactured from a powder of pure
tantalum metal. OxiCap® - niobium oxide capacitor is made
from niobium oxide NbO powder. The typical particle size is
between 2 and 10 μm. where ε0 is the dielectric constant of free space
Figure below shows typical powders. Note the very great (8.855 x 10-12 Farads/m)
difference in particle size between the powder CVs/g. εr is the relative dielectric constant
= 27 for Tantalum Pentoxide
= 41 for Niobium Pentoxide
d is the dielectric thickness in meters
C is the capacitance in Farads
and A is the surface area in meters
Rearranging this equation gives:
4000μFV 20000μFV 50000μFV thus for a 220μF/6V capacitor the surface area is 346 square
Figure 1a. Tantalum powder centimeters, or nearly a half times the size of this page.
The dielectric is then formed over all the Tantalum or niobium oxide
surfaces by the electrochemical process of anodization. To activate
this, the “pellet” is dipped into a very weak solution of phosphoric
acid.
The dielectric thickness is controlled by the voltage applied during
the forming process. Initially the power supply is kept in a constant
current mode until the correct thickness of dielectric has been
reached (that is the voltage reaches the ‘forming voltage’), it then
switches to constant voltage mode and the current decays to close
Figure 1b. Niobium Oxide powder to zero.
The powder is compressed under high pressure around a
Tantalum or Niobium wire (known as the Riser Wire) to form a
“pellet”. The riser wire is the anode connection to the capacitor
This is subsequently vacuum sintered at high temperature
(typically 1200 - 1800°C) which produces a mechanically strong
pellet and drives off any impurities within the powder
During sintering the powder becomes a sponge like structure
with all the particles interconnected in a huge lattice
This structure is of high mechanical strength and density, but
is also highly porous giving a large internal surface area (see Figure 2. Sintered Anode
Figure 2)
The larger the surface area the larger the capacitance. Thus
high CV/g (capacitance voltage product per gram) powders,
which have a low average particle size, are used for low voltage,
high capacitance parts
By choosing which powder and sinter temperature is used to
produce each capacitance/voltage rating the surface area can
be controlled.

Technical Summary and Application Guidelines
The chemical equations describing the process are as The next stage is the production of the cathode plate. This is
follows: achieved by pyrolysis of Manganese Nitrate into Manganese
Dioxide.
Tantalum Anode: 2 Ta  2 Ta5+ + 10 ℮–
The “pellet” is dipped into an aqueous solution of nitrate and then
2 Ta5+ + 10 OH- Ta2O5 + 5 H2O
baked in an oven at approximately 250°C to produce the dioxide
Niobium Oxide Anode: coat. The chemical equation is:
2 NbO  2 NbO3+ + 6 ℮– Mn (NO3)2  MnO2 + 2NO2–
2 NbO3+ + 6 OH– Nb2O5 + 3 H2O
This process is repeated several times through varying specific
Cathode: densities of nitrate to build up a thick coat over all internal and
Tantalum: 10 H2O – 10 e  5H2 + 10 OH- external surfaces of the “pellet”, as shown in Figure 4.
Niobium Oxide: 6 H2O – 6 e–  3H2 + 6 OH-
The oxide forms on the surface of the Tantalum or Niobium

Oxide but it also grows into the material. For each unit of
oxide two thirds grows out and one third grows in. It is for this
reason that there is a limit on the maximum voltage rating of
Tantalum & Niobium Oxide capacitors with present technology
powders (see Figure 3).
The dielectric operates under high electrical stress. Consider
a 220μF 6V part:
Formation voltage = Formation Ratio x Working Figure 4. Manganese Dioxide Layer
Voltage
= 3.5 x 6 The “pellet” is then dipped into graphite and silver to provide
= 21 Volts a good connection to the Manganese Dioxide cathode plate.
Tantalum: Electrical contact is established by deposition of carbon onto
The pentoxide (Ta2O5) dielectric grows at a rate of 1.7 x 10-9 the surface of the cathode. The carbon is then coated with a
m/V conductive material to facilitate connection to the cathode
Dielectric thickness (d) = 21 x 1.7 x 10-9 termination (see Figure 5). Packaging is carried out to meet
= 0.036 pm individual specifications and customer requirements. This
Electric Field strength = Working Voltage / d manufacturing technique is adhered to for the whole range of
= 167 KV/mm KYOCERA AVX Tantalum capacitors, which can be subdivided
into four basic groups: Chip / Resin dipped / Rectangular boxed
Niobium Oxide: / Axial.
The niobium oxide (Nb2O5) dielectric grows at a rate of 2.4 x
10-9 m/V Further information on production of Tantalum Capacitors
can be obtained from the technical paper “Basic Tantalum
Dielectric thickness (d) = 21 x 2.4 x 10-9 Technology”, by John Gill, available from your local KYOCERA
= 0.050 pm AVX representative.
Electric Field strength = Working Voltage / d
= 120 KV/mm
Figure 3. Dielectric layer
Anode Manganese Graphite Outer Silver Cathode

Dioxide Silver Layer Epoxy Connection
Figure 5. Cathode Termination
SECTION 1: ELECTRICAL CHARACTERISTICS AND EXPLANATION OF TERMS

1.1 CAPACITANCE 1.2 VOLTAGE
1.1.1 Rated capacitance (CR). 1.2.1 Rated d.c. voltage (VR).
This is the nominal rated capacitance. For tantalum and OxiCap® This is the rated d.c. voltage for continuous operation up to 85°C
capacitors it is measured as the capacitance of the equivalent (up to 40°C for TLJ, TLN, NLJ series).
series circuit at 25°C using a measuring bridge supplied by a Operating voltage consists of the sum of DC bias voltage and
0.5V rms 120Hz sinusoidal signal, free of harmonics with a bias ripple peak voltage. The peak voltage should not exceed the
of 2.2Vd.c. category voltage. For recommended voltage (application)
derating refer to figure 2c of the SECTION 3.
1.1.2 Capacitance tolerance.
This is the permissible variation of the actual value of the 1.2.2 Category voltage (VC).
capacitance from the rated value. This is the maximum voltage that may be applied continuously to
1.1.3 Temperature dependence of capacitance. a capacitor. It is equal to the rated voltage up to +85°C (up to 40°C
The capacitance of a tantalum capacitor varies with temperature. for TLJ, TLN, NLJ series), beyond which it is subject to a linear
This variation itself is dependent to a small extent on the rated derating, to 2/3 VR at 125°C for tantalum and 2/3 VR at 105°C for
voltage and capacitor size. OxiCap®.
1.2.3 Surge voltage (VS).

This is the highest voltage that may be applied to a capacitor for
short periods of time in circuits with minimum series resistance
of 33Ohms (CECC states 1kΩ). The surge voltage may be applied
up to 10 times in an hour for periods of up to 30 seconds at a
1.1.4 Frequency dependence of the capacitance. time. The surge voltage must not be used as a parameter in the
The effective capacitance decreases as frequency increases. design of circuits in which, in the normal course of operation, the
Beyond 100kHz the capacitance continues to drop until resonance capacitor is periodically charged and discharged.
is reached (typically between 0.5 - 5MHz depending on the rating).
Beyond the resonant frequency the device becomes inductive. 85°C Tantalum 125°C Tantalum*
Rated Voltage Surge Voltage Category Surge Voltage
VR VS Voltage VC VS
TAJE227K010 2 2.7 1.3 1.7
2.5 3.3 1.7 2.2
3 3.9 2 2.6
4 5.2 2.7 3.4
5 6.5 3.3 4
6.3 8 4 5
10 13 7 8
16 20 10 13
20 26 13 16
25 32 17 20
35 46 23 28
50 65 33 40
85°C OxiCap® 105°C OxiCap®

Rated Voltage Surge Voltage Category Surge Voltage
VR VS Voltage VC VS
1.8 2.3 1.2 1.6
2.5 3.3 1.7 2.2
4 5.2 2.7 3.4
6.3 8 4 5
10 13 7 8
For individual part number please refer to SpiTan Software for frequency and *For THJ 175°C Category & Surge voltage see THJ section on pages 135-140.
temperature behavior found on KYOCERA AVX Corporation website.
061121

1.2.4 Effect of surges one half of the nominal capacitance of either capacitor. Under
The solid Tantalum and OxiCap® capacitors have a limited ability to conditions of isolated pulses or during the first few cycles, the
withstand voltage and current surges. This is in common with all capacitance may approach the full nominal value. The reverse
other electrolytic capacitors and is due to the fact that they operate voltage ratings are designed to cover exceptional conditions of
under very high electrical stress across the dielectric. For example a small level excursions into incorrect polarity. The values quoted
6 volt tantalum capacitor has an Electrical Field of 167 kV/mm when are not intended to cover continuous reverse operation.
operated at rated voltage. OxiCap® capacitors operate at electrical The peak reverse voltage applied to the capacitor must not
field significantly less than 167 kV/mm. exceed:
It is important to ensure that the voltage across the terminals of the 10% of the rated d.c. working voltage to a maximum of 1.0v at
capacitor never exceeds the specified surge voltage rating. 25°C
Solid tantalum capacitors and OxiCap® have a self healing ability 3% of the rated d.c. working voltage to a maximum of
provided by the Manganese Dioxide semiconducting layer used
0.5v at 85°C
as the negative plate. However, this is limited in low impedance
applications. In the case of low impedance circuits, the capacitor is 1% of the rated d.c. working voltage to a maximum of 0.1v at
likely to be stressed by current surges. 125°C (0.1v at 150°C THJ Series)
Derating the capacitor increases the reliability of the component. Note: Capacitance and DF values of OxiCap® may exceed
(See Figure 2b page 265). The “KYOCERA AVX Recommended specification limits under these conditions.
Derating Table” (page 268) summarizes voltage rating for use
on common voltage rails, in low impedance applications for both
Tantalum and OxiCap® capacitors.
In circuits which undergo rapid charge or discharge a protective
resistor of 1Ω/V is recommended. If this is impossible, a derating
factor of up to 70% should be used on tantalum capacitors. OxiCap®
capacitors can be used with derating of 20% minimum.
In such situations a higher voltage may be needed than is available
as a single capacitor. A series combination should be used to
increase the working voltage of the equivalent capacitor: For
example, two 22μF 25V parts in series is equivalent to one 11pF 50V
part. For further details refer to J.A. Gill's paper “Investigation into
the Effects of Connecting Tantalum Capacitors in Series”, available
from KYOCERA AVX offices worldwide.
NOTE:
While testing a circuit (e.g. at ICT or functional) it is likely that the
capacitors will be subjected to large voltage and current transients,
which will not be seen in normal use. These conditions should be
borne in mind when considering the capacitor's rated voltage for
1.2.6 Superimposed A.C. Voltage (Vr.m.s.) - Ripple
use. These can be controlled by ensuring a correct test resistance
Voltage.
is used.
This is the maximum r.m.s. alternating voltage; superimposed
1.2.5 Reverse voltage and Non-Polar operation. on a d.c. voltage, that may be applied to a capacitor. The sum
The values quoted are the maximum levels of reverse voltage which of the d.c. voltage and peak value of the superimposed a.c.
should appear on the capacitors at any time. These limits are based voltage must not exceed the category voltage, v.c.
on the assumption that the capacitors are polarized in the correct Full details are given in Section 2.
direction for the majority of their working life. They are intended to
cover short term reversals of polarity such as those occurring during 1.2.7 Forming voltage.
switching transients of during a minor portion of an impressed This is the voltage at which the anode oxide is formed. The
waveform. Continuous application of reverse voltage without thickness of this oxide layer is proportional to the formation
normal polarization will result in a degradation of leakage current. In voltage for a capacitor and is a factor in setting the rated
conditions under which continuous application of a reverse voltage voltage.
could occur two similar capacitors should be used in a back-to-back
configuration with the negative terminations connected together.
Under most conditions this combination will have a capacitance
052919

1.3 DISSIPATION FACTOR AND 1.4 IMPEDANCE, (Z) AND EQUIVALENT

TANGENT OF LOSS ANGLE (TAN D) SERIES RESISTANCE (ESR)
1.3.1 Dissipation factor (D.F.). This is the ratio of voltage to current at a specified frequency. Three
Dissipation factor is the measurement of the tangent of the loss factors contribute to the impedance of a Tantalum capacitor; the
angle (tan ) expressed as a percentage. The measurement of DF resistance of the semiconductor layer; the capacitance value and
is carried out using a measuring bridge that supplies a 0.5V rms the inductance of the electrodes and leads.
120Hz sinusoidal signal, free of harmonics with a bias of 2.2Vdc. At high frequencies the inductance of the leads becomes a
The value of DF is temperature and frequency dependent. limiting factor. The temperature and frequency behavior of
Note: For surface mounted products the maximum allowed DF these three factors of impedance determine the behavior of the
values are indicated in the ratings table and it is important to note impedance Z. The impedance is measured at 25°C and 100kHz
that these are the limits met by the component AFTER soldering
onto the substrate. 1.4.2 Equivalent Series Resistance, ESR.
Resistance losses occur in all practical forms of capacitors.
1.3.2 Tangent of Loss Angle (tan δ). These are made up from several different mechanisms, including
This is a measurement of the energy loss in the capacitor. It is resistance in components and contacts, viscous forces within
expressed, as tan and is the power loss of the capacitor divided by the dielectric and defects producing bypass current paths. To
its reactive power at a sinusoidal voltage of specified frequency. express the effect of these losses they are considered as the
Terms also used are power factor, loss factor and dielectric loss. ESR of the capacitor. The ESR is frequency dependent and can be
Cos (90 - δ) is the true power factor. The measurement of tan δ found by using the relationship;
is carried out using a measuring bridge that supplies a 0.5V rms
120Hz sinusoidal signal, free of harmonics with a bias of 2.2Vdc.
1.3.3 Frequency dependence of Dissipation Factor. Where f is the frequency in Hz, and C is the capacitance in farads.
Dissipation Factor increases with frequency as shown in the The ESR is measured at 25°C and 100kHz.
typical curves that are for tantalum and OxiCap® capacitors ESR is one of the contributing factors to impedance, and at high
identical: frequencies (100kHz and above) it becomes the dominant factor.
Thus ESR and impedance become almost identical, impedance
Typical DF vs Frequency being only marginally higher.
50
1.4.3 Frequency dependence of Impedance and ESR.
ESR and Impedance both increase with decreasing frequency. At
5 lower frequencies the values diverge as the extra contributions to
DF Multiplier
impedance (due to the reactance of the capacitor) become more

Tantalum
OxiCap®
significant. Beyond 1MHz (and beyond the resonant point of the
1 capacitor) impedance again increases due to the inductance of
the capacitor. Typical ESR and Impedance values are similar for
both tantalum and niobium oxide materials and thus the same
0.1 charts are valid for both for Tantalum and OxiCap® capacitors.
0.1 1 10 100
Frequency (kHz)
1.3.4 Temperature dependence of Dissipation Factor.

Dissipation factor varies with temperature as the typical curves Typical ESR vs Frequency
show. These plots are identical for both Tantalum and OxiCap®
5
capacitors. For maximum limits please refer to ratings tables. 4.5
4
3.5
ESR Multiplier
Typical DF vs Temperature 3
1.8
2.5
1.7 OxiCap®
2
1.6 Tantalum
1.5
1.5
DF Multiplier
1
1.4
0.5
1.3 0
1.2 0.1 1 10 100 1000
OxiCap® Frequency (kHz)
1.1
Tantalum
1
0.9
0.8
-55 -5 45 95
Temperature (Celsius)
052919

Typical Impedance vs Frequency 1.5.2 Temperature dependence of the leakage

100 current.
The leakage current increases with higher temperatures;
typical values are shown in the graph. For operation between
Impedance Multiplier
10 85°C and 125°C, the maximum working voltage must be

OxiCap® derated and can be found from the following formula.
Tantalum
1
where T is the required operating temperature.

0.1
0.1 1 10 100 1000 LEAKAGE CURRENT vs. TEMPERATURE
Frequency (kHz)
1.4.4 Temperature dependence of the Impedance and 100
ESR.
At 100kHz, impedance and ESR behave identically and
Leakage current
10
ratio I/IR20
decrease with increasing temperature as the typical curves
show.
1
Typical 100kHz ESR vs Temperature

1.8 0.1
-40 -20 0 20 40 60 80 100 125 150 175
1.7
Temperature (°C)
1.6
Change in ESR
1.5
OxiCap® 1.5.3 Voltage dependence of the leakage current.
1.4
1.3
The leakage current drops rapidly below the value corresponding
1.2 to the rated voltage VR when reduced voltages are applied.
Tantalum
1.1 The effect of voltage derating on the leakage current is shown in
1 the graph. This will also give a significant increase in the reliability
0.9
for any application. See Section 3.1 (page 265) for details.
0.8
-55 -40 -20 0 20 40 60 80 100 125 150
Temperature (Celsius) LEAKAGE CURRENT vs. RATED VOLTAGE
1
1.5 D.C. LEAKAGE CURRENT
1.5.1 Leakage current.
The leakage current is dependent on the voltage applied, the Leakage Current
elapsed time since the voltage was applied and the component ratio I/IVR
0.1
Typical
Range
temperature. It is measured at +20°C with the rated voltage
applied. A protective resistance of 1000Ω is connected in series
with the capacitor in the measuring circuit. Three to five minutes
after application of the rated voltage the leakage current must
not exceed the maximum values indicated in the ratings table.
0.01
Leakage current is referenced as DCL (for Direct Current 0 20 40 60 80 100
Leakage). The default maximum limit for DCL Current is given Rated Voltage (VR) %
by DCL = 0.01CV, where DCL is in microamperes, and C is the
capacitance rating in microfarads, and V is the voltage rating in
For input condition of fixed application voltage and including
volts. DCL of tantalum capacitors vary within arrange of 0.01 -
median curve of the Leakage current vs. Rated voltage graph
0.1CV or 0.5μA (whichever is the greater). And 0.02 - 0.1CV or
displayed above we can evaluate following curve.
1.0μA (whichever is the greater) for OxiCap® capacitors.
Reforming of Tantalum or OxiCap® capacitors is unnecessary
even after prolonged storage periods without the application of
voltage.
052919

LEAKAGE CURRENT MULTIPLIER vs. VOLTAGE DERATING 1.5.4 Ripple current.

for FIXED APPLICATION VOLTAGE VA The maximum ripple current allowed is derived from the power
dissipation limits for a given temperature rise above ambient
1.4
temperature (please refer to Section 2, pages 262-263).
Leakage current multiplier
1.2
1
1.6 SELF INDUCTANCE (ESL)
0.8
0.6
The self-inductance value (ESL) can be important for resonance
0.4 Optimal
frequency evaluation. See figure below typical ESL values per
0.2
range case size.
0 TAJ/TMJ/TPS/TRJ/THJ/TLJ/TCJ/TCO/TCQ/
0 10 20 30 40 50 60 70 80 90 100
NLJ/NOJ/NOS
Application voltage VA to rated voltage VR ratio (%)
Typical Self Typical Self Typical Self

We can identify the range of VA/VR (derating) values with Case Case Case
Inductance Inductance Inductance
Size Size Size
minimum actual DCL as the “optimal” range. Therefore the value (nH) value (nH) value (nH)
A 1.8 H 1.8 U 2.4
minimum DCL is obtained when capacitor is used at 25 to 40 %
B 1.8 K 1.8 V 2.4
of rated voltage - when the rated voltage of the capacitor is 2.5 C 2.2 N 1.4 W 2.2
to 4 times higher than actual application voltage. D 2.4 P 1.4 X 2.4
E 2.5 R 1.4 Y 2.4
For additional information on Leakage Current, please consult
F 2.2 S 1.8 5 2.4
the KYOCERA AVX technical publication “Analysis of Solid G 1.8 T 1.8
Tantalum Capacitor Leakage Current” by R. W. Franklin.
TAC/TLC/TPC TCM/TPM TLN/TCN/J-CAP™
Typical Self
TRM/NOM Typical Self
Case Typical Self Case
Inductance Case Inductance
Size Inductance Size
value (nH) Size value (nH)
A 1.5 value (nH) K 1.0
B 1.6 D 1.0 L 1.0
D 1.4 E 2.5 M 1.3
E 1.0 U 2.4 N 1.3
H 1.4 V 2.4 O 1.0
I 1.3 Y 1.0 S 1.0
J 1.2 T 1.0
K 1.1 X 1.8
L 1.2 Z 1.8
M 1.3 3 2.0
R 1.4 4 2.2
T 1.6 6 2.5
U 1.3 8 2.2
V 1.5
Z 1.1
082720

SECTION 2: A.C. OPERATION, RIPPLE VOLTAGE AND RIPPLE CURRENT

2.1 RIPPLE RATINGS (A.C.) Where P is the maximum permissible power dissipated as listed for
In an a.c. application heat is generated within the capacitor by the product under consideration (see tables).
both the a.c. component of the signal (which will depend upon the However care must be taken to ensure that:
signal form, amplitude and frequency), and by the d.c. leakage. For 1. The d.c. working voltage of the capacitor must not be exceeded
practical purposes the second factor is insignificant. The actual by the sum of the positive peak of the applied a.c. voltage and the
power dissipated in the capacitor is calculated using the formula: d.c. bias voltage.
P = I2 R
and rearranged to I = SQRT ( ⁄R) .....(Eq. 1)
P
2. The sum of the applied d.c. bias voltage and the negative peak of
where I = rms ripple current, amperes the a.c. voltage must not allow a voltage reversal in excess of the
R = equivalent series resistance, ohms “Reverse Voltage”.
U = rms ripple voltage, volts
P = power dissipated, watts Historical ripple calculations.
Z = impedance, ohms, at frequency under Previous ripple current and voltage values were calculated using
consideration an empirically derived power dissipation required to give a 10°C
(30°C for polymer) rise of the capacitors body temperature from
Maximum a.c. ripple voltage (Umax).
room temperature, usually in free air. These values are shown in
Table I. Equation 1 then allows the maximum ripple current to be
From the Ohms’ law equation: established, and Equation 2, the maximum ripple voltage. But as has
been shown in the KYOCERA AVX article on thermal management
by I. Salisbury, the thermal conductivity of a Tantalum chip capacitor
Umax = IR .....(Eq. 2) varies considerably depending upon how it is mounted.
Table I: Power Dissipation Ratings (In Free Air)

TAJ/TMJ/TPS/TPM/TRJ/TRM/THJ/TLJ/TLN/TCJ/TCM/TCN/J-CAP™/ TACmicrochip® Series NLJ/NOJ/NOS/NOM
TCO/TCQ/NLJ/NOJ/NOS/NOM Series Molded Chip Case Max. power Temperature correction factor for
Max. power dissipation (W) Size dissipation (W) ripple current
Tantalum Polymer OxiCap® A 0.040 Temp. °C Factor
B 0.040 +25 1.00
Case TCJ +55 0.95
TAJ/TMJ/TPS TCN NLJ D 0.035
Size TPM E 0.010 +85 0.90
TRJ/THJ TLN J-CAP™ TCM NOJ NOM +105 0.40
TRM H 0.040
TLJ TCO NOS
I 0.035 +125
0.40
TCQ J 0.020 (NOS,NOM)
A 0.075 — — 0.100 — 0.090 — K 0.015
B 0.085 — — 0.125 — 0.102 — L 0.025
C 0.110 — — 0.175 — 0.132 — M 0.030
Q 0.040
D 0.150 — 0.255 0.225 – 0.180 —
R 0.045
E 0.165 — 0.270 0.250 0.410 0.198 0.324 T 0.040
F 0.100 — — 0.150 — 0.120 — U 0.035
G 0.070 0.060 — 0.100 — 0.084 — V 0.035
H 0.080 0.070 — 0.100 — 0.096 — X 0.040
Z 0.020
K 0.065 0.055 — 0.090 — 0.078 —
L 0.070 0.060 — 0.095 — 0.084 — TAJ/TPS/TPM/TRJ/TRM/THJ/TLJ/TLN
M — 0.040 — 0.080 — — — Correction Factor Correction Factor for Max. Temperature
N 0.050 0.040 — 0.080 — — — Temp ºC
for ripple current Power Dissipation rise ºC
O – – — 0.065 — — — up to 25°C 1.00 1.00 10
P 0.060 — — 0.090 — 0.072 — +55 0.95 0.90 9
R 0.055 — — 0.085 — 0.066 — +85 0.90 0.81 8.1
S 0.065 0.055 — 0.095 — 0.078 — +105 0.65 0.42 4.2
T 0.080 0.070 — 0.100 — 0.096 — +115 0.49 0.24 2.4
U 0.165 — 0.295 0.380 0.430 — — +125 0.40 0.16 1.6
V 0.250 — 0.285 0.360 0.420 0.300 — +175 (THJ) 0.20 0.04 0.4
+200 (THJ) 0.10 0.01 0.1
W 0.090 — — 0.130 — 0.108 —
X 0.100 — — 0.175 — 0.120 —
Y 0.125 0.115 0.210 0.185 – 0.150 — TCJ/TCM/TCN/J-CAP™/TCO/TCQ
Z — — — 0.175 — — —
Correction Factor Correction Factor for Max. Temperature
3 — — — 0.145 — — — Temp ºC
for ripple current Power Dissipation rise ºC
4 — 0.165 — 0.190 — — — up to 45°C 1.00 1.00 30
5 — — — 0.240 — — — +85 0.70 0.49 15
6 — 0.230 — — — — — +105 0.45 0.20 6
8 — — — 0.190 — — — +125 0.25 0.06 1.8
081021

A piece of equipment was designed which would pass sine and 70
square wave currents of varying amplitudes through a biased 60
capacitor. The temperature rise seen on the body for the capacitor 50
Temperature rise (C)

was then measured using an infra-red probe. This ensured that 40
100KHz
there was no heat loss through any thermocouple attached to the 30 1 MHz
capacitor's surface.
20
Results for the C, D and E case sizes
10
100
0
90 0.00 0.20 0.40 0.60 1.00
0.80 1.20
80
Temperature rise ( o C)
RMS current (Amps)

70
60
C case If I2R is then plotted it can be seen that the two lines are in fact
50 D case coincident, as shown in figure below.
40
E case
30 70.00
20
60.00
10
0
Temperature Rise (C)

50.00
0 0.1 0.2 0.3 0.4 0.5
Power (Watts) 40.00 100KHz
30.00 1 MHz
Several capacitors were tested and the combined results are
shown above. All these capacitors were measured on FR4 board, 20.00
with no other heat sinking. The ripple was supplied at various 10.00
frequencies from 1kHz to 1MHz. 0.00

0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
As can be seen in the figure above, the average Pmax value for 0.00
FR
the C case capacitors was 0.11 Watts. This is the same as that
Example
quoted in Table I.
A Tantalum capacitor is being used in a filtering application,
The D case capacitors gave an average Pmax value 0.125 Watts. where it will be required to handle a 2 Amp peak-to-peak, 200kHz
This is lower than the value quoted in the Table I by 0.025 Watts. square wave current.
The E case capacitors gave an average Pmax of 0.200 Watts that
A square wave is the sum of an infinite series of sine waves
was much higher than the 0.165 Watts from Table I.
at all the odd harmonics of the square waves fundamental
If a typical capacitor's ESR with frequency is considered, e.g. frequency. The equation which relates is:
figure below, it can be seen that there is variation. Thus for a
ISquare = Ipksin (2πƒ) + Ipksin (6πƒ) + Ipksin (10πƒ) + Ipksin (14πƒ) +...
set ripple current, the amount of power to be dissipated by the
capacitor will vary with frequency. This is clearly shown in figure Thus the special components are:
in top of next column, which shows that the surface temperature Peak-to-peak current RMS current
Frequency
of the unit raises less for a given value of ripple current at 1MHz (Amps) (Amps)
than at 100kHz. 200 KHz 2.000 0.707
600 KHz 0.667 0.236
The graph below shows a typical ESR variation with frequency. 1 MHz 0.400 0.141
Typical ripple current versus temperature rise for 100kHz and 1.4 MHz 0.286 0.101
1MHz sine wave inputs. Let us assume the capacitor is a TAJD686M006
Typical ESR measurements would yield.
ESR vs. FREQUENCY Power (Watts)
Frequency Typical ESR (Ohms)
(TPSE107M016R0100) Irms2 x ESR
1
200 KHz 0.120 0.060
600 KHz 0.115 0.006
1 MHz 0.090 0.002
1.4 MHz 0.100 0.001
ESR (Ohms)
0.1
Thus the total power dissipation would be 0.069 Watts.
From the D case results shown in figure top of previous column,
it can be seen that this power would cause the capacitors
surface temperature to rise by about 5°C. For additional
information, please refer to the KYOCERA AVX technical
0.01
100 1000 10000 100000 1000000 publication “Ripple Rating of Tantalum Chip Capacitors” by
Frequency (Hz)
R.W. Franklin.
042220

2.2 OxiCap® RIPPLE RATING

OxiCap® capacitors showing 20% higher power dissipation allowed compared to tantalum capacitors as a result of twice higher specific heat
of niobium oxide compared to Tantalum powders. (Specific heat is related to energy necessary to heat a defined volume of material to a
specified temperature.)
2.3 THERMAL MANAGEMENT

The heat generated inside a tantalum capacitor in a.c. operation management, the power dissipation required to give a 10°C (30°C
comes from the power dissipation due to ripple current. It is equal to for polymer) rise above ambient may be up to a factor of 10 less. In
I2R, where I is the rms value of the current at a given frequency, and R these cases, the actual capacitor temperature should be established
is the ESR at the same frequency with an additional contribution due (either by thermocouple probe or infra-red scanner) and if it is seen
to the leakage current. The heat will be transferred from the outer to be above this limit it may be necessary to specify a lower ESR part
surface by conduction. How efficiently it is transferred from this or a higher voltage rating.
point is dependent on the thermal management of the board. Please contact application engineering for details or contact the
The power dissipation ratings given in Section 2.1 (page 236) are KYOCERA AVX technical publication entitled “Thermal Management
based on free-air calculations. These ratings can be approached if of Surface Mounted Tantalum Capacitors” by Ian Salisbury.
efficient heat sinking and/or forced cooling is used.
In practice, in a high density assembly with no specific thermal
Thermal Dissipation from the Mounted Chip
ENCAPSULANT
LEAD FRAME
TANTALUM
ANODE
SOLDER COPPER
PRINTED CIRCUIT BOARD
Thermal Impedance Graph with Ripple Current
THERMAL IMPEDANCE GRAPH

C CASE SIZE CAPACITOR BODY
TEMPERATURE DEG C
140
121 C\WATT
120
236 C\WATT
100
80 73 C\WATT
60
X
40
X
X
20
X - RESULTS OF RIPPLE CURRENT TEST - RESIN BODY
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4
POWER IN UNIT CASE, DC WATTS
= PCB MAX Cu THERMAL = PCB MIN Cu AIR GAP = CAP IN FREE AIR
012920

SECTION 3: RELIABILITY AND CALCULATION OF FAILURE RATE
3.1 STEADY-STATE The graph, Figure 2a, shows the relationship between voltage
Both Tantalum and Niobium Oxide dielectric have essentially no derating (the ratio between applied and rated voltage) and the
wear out mechanism and in certain circumstances is capable failure rate. The graph gives the correction factor FU for any
of limited self healing. However, random failures can occur in operating voltage.
operation. The failure rate of Tantalum capacitors will decrease Figure 2a. Correction factor to failure rate FV for voltage derating
with time and not increase as with other electrolytic capacitors of a typical component (60% con. level).
and other electronic components.
Figure 1. Tantalum and OxiCap® Reliability Curve
10.0
1.0
FV Correction Factor
®
Infant iCap
Mortalities 0.1 / Ox
lum
nta
0.01 Ta
0.001
0.0001
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
Infinite Useful Life
Applied Voltage/Rated Voltage
Useful life reliability can be altered by voltage
derating, temperature or series resistance
Figure 2b. Gives our recommendation for voltage derating for
tantalum capacitors to be used in typical applications.
The useful life reliability of the Tantalum and OxiCap capacitors in ®
steady-state is affected by three factors. The equation from which

the failure rate can be calculated is: 40
F = FV x FT x FR x FB
Operating Voltage (V)
30
where FV is a correction factor due to operating voltage/
voltage derating
20 in General Circuit
FT is a correction factor due to operating
temperature
10
FR is a correction factor due to circuit series
Low Impedance Circuit
resistance 0
4 6.3 10 16 20 25 35 50
FB is the basic failure rate level
Rated Voltage (V)
Base failure rate.
Standard Tantalum conforms to Level M reliability (i.e. 1%/1000
hrs) or better at rated voltage, 85°C and 0.1Ω/volt circuit impedance. Figure 2c. Gives voltage derating recommendations for tantalum
FB = 1.0% / 1000 hours for TAJ, TPS, TPM, TCJ, TCO, TCQ, capacitors as a function of circuit impedance.
TCM, TCN, J-CAP™, TAC
1.0
0.5% / 1000 hours for TMJ, TRJ, TRM, THJ & NOJ
Working Voltage/Rated Voltage
0.9 OxiCap®, Tantalum Polymer TCJ, TCN, J-CAPTM

0.2% / 1000 hours for NOS and NOM 0.8
0.7
TLJ, TLN, TLC and NLJ series of tantalum capacitors are defined at
0.6
0.5 x rated voltage at 85°C due to the temperature derating. Recommended Range Tantalum
0.5
FB = 0.2%/1000 hours at 85°C and 0.5xVR with 0.1Ω/V series 0.4
impedance with 60% confidence level. 0.3
0.2
Operating voltage/voltage derating. 0.1
If a capacitor with a higher voltage rating than the maximum line 0
0.01 0.1 1.0 10 100 1000 10000
voltage is used, then the operating reliability will be improved. This Circuit Resistance (Ohm/V)
is known as voltage derating.
042120

Operating Temperature. Example calculation.

If the operating temperature is below the rated temperature for Consider a 12 volt power line. The designer needs about 10μF
the capacitor then the operating reliability will be improved as of capacitance to act as a decoupling capacitor near a video
shown in Figure 3. This graph gives a correction factor FT for bandwidth amplifier. Thus the circuit impedance will be limited
any temperature of operation. only by the output impedance of the board’s power unit and
the track resistance. Let us assume it to be about 2 Ohms
minimum, i.e. 0.167 Ohms/Volt. The operating temperature
Figure 3: Correction factor to failure rate FR for ambient range is -25°C to +85°C.
temperature T for typical component If a 10μF 16 Volt capacitor was designed in the operating
(60% con. level). failure rate would be as follows.
10000.0 a) FT = 1.0 @ 85°C
1000.0 b) FR = 0.85 @ 0.167 Ohms/Volt
c) FV = 0.08 @ applied voltage/rated voltage = 75%
FT Correction Factor
NOS
100.0
Tantalum
NOJ
d) FB = 1%/1000 hours, basic failure rate level
10.0
Thus F = 1.0 x 0.85 x 0.08 x 1 = 0.068%/1000 Hours If the
1.0 capacitor was changed for a 20 volt capacitor, the operating
failure rate will change as shown.
0.1
FV = 0.018 @ applied voltage/rated voltage = 60%
0.01
0 20 40 60 80 100 120 140 160 180 200 F = 1.0 x 0.85 x 0.018 x 1 = 0.0153%/1000 Hours
Temperature (ºC)
3.2 Dynamic.
As stated in Section 1.2.4 (page 258), the solid capacitor has
Circuit Impedance. a limited ability to withstand voltage and current surges. Such
All solid Tantalum and/or niobium oxide capacitors require current surges can cause a capacitor to fail. The expected
current limiting resistance to protect the dielectric from failure rate cannot be calculated by a simple formula as in
surges. A series resistor is recommended for this purpose. A the case of steady-state reliability. The two parameters under
lower circuit impedance may cause an increase in failure rate, the control of the circuit design engineer known to reduce the
especially at temperatures higher than 20°C. An inductive low incidence of failures are derating and series resistance.
impedance circuit may apply voltage surges to the capacitor
The table below summarizes the results of trials carried out at
and similarly a non-inductive circuit may apply current surges
KYOCERA AVX with a piece of equipment, which has very low
to the capacitor, causing localized over-heating and failure.
series resistance with no voltage derating applied. That is if
The recommended impedance is 1 Ω per volt. Where this is not
the capacitor was tested at its rated voltage. It has been tested
feasible, equivalent voltage derating should be used (See MIL
on tantalum capacitors, however the conclusions are valid for
HANDBOOK 217). The graph, Figure 4, shows the correction
both tantalum and OxiCap® capacitors.
factor, FR, for increasing series resistance.
Results of production scale derating experiment
Figure 4. Correction factor to failure rate FR for series Capacitance and Number of units 50% derating No derating
resistance R on basic failure rate FB for a typical component Voltage tested applied applied
(60% con. level). 47μF 16V 1,547,587 0.03% 1.1%

100μF 10V 632,876 0.01% 0.5%
Circuit 22μF 25V 2,256,258 0.05% 0.3%
resistance FR
ohms/volt
3.0 0.07 As can clearly be seen from the results of this experiment, the
2.0 0.1 more derating applied by the user, the less likely the probability
1.0 0.2 of a surge failure occurring.
0.8 0.3
0.6 0.4
It must be remembered that these results were derived from a
0.4 0.6 highly accelerated surge test machine, and failure rates in the
0.2 0.8 low ppm are more likely with the end customer.
0.1 1.0 A commonly held misconception is that the leakage current of
a Tantalum capacitor can predict the number of failures which
For circuit impedances below 0.1 ohms per volt, or for any will be seen on a surge screen. This can be disproved by the
mission critical application, circuit protection should be results of an experiment carried out at KYOCERA AVX on 47μF
considered. An ideal solution would be to employ an KYOCERA
AVX SMT thin-film fuse in series.
042220

10V surface mount capacitors with different leakage currents. The For further details on surge in Tantalum capacitors refer to J.A.
results are summarized in the table below. Gill’s paper “Surge in Solid Tantalum Capacitors”, available from
Leakage current vs number of surge failures. KYOCERA AVX offices worldwide.
Again, it must be remembered that these results were derived from a An added bonus of increasing the derating applied in a circuit,
highly accelerated surge test machine, and failure rates in the low ppm to improve the ability of the capacitor to withstand surge
are more likely with the end customer. conditions, is that the steady-state reliability is improved by up
to an order. Consider the example of a 6.3 volt capacitor being
Number tested Number failed surge used on a 5 volt rail.
Standard leakage range
10,000 25
The steady-state reliability of a Tantalum capacitor is affected
0.1μA to 1μA by three parameters; temperature, series resistance and voltage
Over Catalog limit 5μA
10,000 26
derating. Assume 40°C operation and 0.1 Ohms/Volt series
to 50μA resistance.
Classified Short Circuit The capacitors reliability will therefore be:
10,000 25
50μA to 500μA
Failure rate = FU x FT x FR x 1%/1000 hours
OxiCap® capacitor is less sensitive to an overloading stress compared = 0.15 x 0.1 x 1 x 1%/1000 hours
to Tantalum and so a 20% minimum derating is recommended. It may
= 0.015%/1000 hours
be necessary in extreme low impedance circuits of high transient or
‘switch-on' currents to derate the voltage further. Hence in general If a 10 volt capacitor was used instead, the new scaling factor
a lower voltage OxiCap® part number can be placed on a higher rail would be 0.006, thus the steady-state reliability would be:
voltage compared to the tantalum capacitor - see table below. Failure rate = FU x FT x FR x 1%/1000 hours
KYOCERA AVX recommended derating table. = 0.006 x 0.1 x 1 x 1%/1000 hours
= 6 x 10-4 %/1000 hours
Voltage Rail Rated Voltage of Cap (V) So there is an order improvement in the capacitors steadystate
(V) Tantalum OxiCap® reliability.
3.3 6.3 4
5 10 6.3
8 16 10
10 20 –
12 25 –
15 35 –
>24 Series Combination –
042220

SECTION 4: APPLICATION GUIDELINES FOR TANTALUM AND OxiCap® CAPACITORS
Both Tantalum and OxiCap® are lead-free system compatible SnPb soldering:
components, meeting requirements of J-STD-020 standard. The Pre-heating: 50-165ºC/90–120sec.
maximum conditions with care: Max. Peak Temperature: 260ºC for Max. Peak Temperature: 240-250ºC
maximum 10s, 3 reflow cycles. 2 cycles are allowed for F-series Time of wave: 3-5sec.(max.10sec.)
capacitors. The upper side temperature of the board should not exceed
Small parametric shifts may be noted immediately after reflow, +150ºC.
components should be allowed to stabilize at room temperature
prior to electrical testing. GENERAL LEAD-FREE NOTES
The following should be noted by customers changing from
RECOMMENDED REFLOW PROFILE lead based systems to the new lead free pastes.
a) The visual standards used for evaluation of solder joints
will need to be modified as lead-free joints are not as bright
as with tin-lead pastes and the fillet may not be as large.
b) Resin color may darken slightly due to the increase in
temperature required for the new pastes.
c) Lead-free solder pastes do not allow the same self
alignment as lead containing systems. Standard mounting
pads are acceptable, but machine set up may need to be
modified.
Note: TCJ, TCM, TCN, J-CAP™, TCO, TCQ, F38, TLN and F98
series are not dedicated to wave soldering.
Lead-free soldering: RECOMMENDED HAND SOLDERING
Pre-heating: 150±15ºC/60–120sec. Recommended hand soldering condition:
Max. Peak Temperature: 245±5ºC
Max. Peak Temperature Gradient: 2.5ºC/sec.
Max. Time above 230ºC: 40sec. max. Tip Diameter Selected to fit Application
Time to Peak: 195sec. Max. Tip Temperature +370°C
Max. Exposure Time 3s
SnPb soldering: Anti-static Protection Non required
Pre-heating: 150±15ºC/60–90sec.
Max. Peak Temperature: 220±5ºC Note: TCJ, TCM, TCN, J-CAP™, TCO, TCQ, F38, TLN and
Max. Peak Temperature Gradient: 2ºC/sec. F98 series are not dedicated to hand soldering.
Max. Time above solder melting point: 60sec.
RECOMMENDED WAVE SOLDERING

Lead-free soldering:
Pre-heating: 50-165ºC/90-120sec.
Max. Peak Temperature: 250-260ºC
Time of wave: 3-5sec.(max. 10sec.)
042120

SECTION 5: TERMINATIONS
5.1 Basic Materials
Two basic materials are used for termination leads: Nilo 42
(Fe58Ni42) and copper. Copper lead frame is mainly used
for products requiring low ESR performance, while Nilo 42 is
used for other products. The actual status of basic material
per individual part type can be checked with KYOCERA AVX.
5.2 Termination Finishes - Coatings

Three terminations plating are available. Standard plating
material is pure matte tin (Sn). Gold or tin-lead (SnPb) are
available upon request with different part number suffix
designations.*
5.2.1. Pure matte tin is used as the standard coating
material meeting lead-free and RoHS requirements.
KYOCERA AVX carefully monitors the latest
findings on prevention of whisker formation.
Currently used techniques include use of matte
tin electrodeposition, nickel barrier underplating
and recrystallization of surface by reflow.
Terminations are tested for whiskers according
to NEMI recommendations and JEDEC standard
requirements. Data is available upon request.
5.2.2. Gold Plating is available as a special option* mainly
for hybrid assembly using conductive glue.
5.2.3. Tin-lead (90%Sn 10%Pb) electroplated termination
finish is available as a special option* upon request.
* Some plating options can be limited to specific part types.
Please check availability of special options with KYOCERA AVX.
052919

SECTION 6: MECHANICAL AND THERMAL PROPERTIES OF CAPACITORS
6.1 Acceleration PAD DIMENSIONS: millimeters (inches)

98.1m/s2 (10g) Case Size PSL PL PS PW PWw
Series A 4.00 (0.157) 1.40 (0.055) 1.20 (0.047) 1.80 (0.071) 0.90 (0.035)
6.2 Vibration Severity B 4.00 (0.157) 1.40 (0.055) 1.20 (0.047) 2.80 (0.110) 1.60 (0.063)
C 6.50 (0.256) 2.00 (0.079) 2.50 (0.098) 2.80 (0.110) 1.60 (0.063)
10 to 2000Hz, 0.75mm of 98.1m/s2 (10g) D 8.00 (0.315) 2.00 (0.079) 4.00 (0.157) 3.00 (0.118) 1.70 (0.067)
E 8.00 (0.315) 2.00 (0.079) 4.00 (0.157) 3.00 (0.118) 1.70 (0.067)
6.3 Shock F
G
6.50 (0.256)
4.00 (0.157)
2.00 (0.079)
1.40 (0.055)
2.50 (0.098)
1.20 (0.047)
2.80 (0.110)
1.80 (0.071)
1.60 (0.063)
0.90 (0.035)
H 4.00 (0.157) 1.40 (0.055) 1.20 (0.047) 2.80 (0.110) 1.60 (0.063)
Trapezoidal Pulse, 98.1m/s2 for 6ms. K 4.00 (0.157) 1.40 (0.055) 1.20 (0.047) 1.80 (0.071) 0.90 (0.035)
SMD ‘J’
L 4.00 (0.157) 1.40 (0.055) 1.20 (0.047) 2.80 (0.110) 1.60 (0.063)
6.4 Adhesion to Substrate Lead &
OxiCap®
N
P
2.70 (0.106)
2.70 (0.106)
0.95 (0.037)
0.95 (0.037)
0.80 (0.031)
0.80 (0.031)
1.60 (0.063)
1.60 (0.063)
0.80 (0.031)
0.80 (0.031)
(excluding
IEC 384-3. minimum of 5N. F-series)
R 2.70 (0.106) 0.95 (0.037) 0.80 (0.031) 1.60 (0.063) 0.80 (0.031)
S 4.00 (0.157) 1.40 (0.055) 1.20 (0.047) 1.80 (0.071) 0.90 (0.035)
6.5 Resistance to Substrate Bending T
U
4.00 (0.157)
8.00 (0.315)
1.40 (0.055)
2.00 (0.079)
1.20 (0.047)
4.00 (0.157)
2.80 (0.110)
3.70 (0.145)
1.60 (0.063)
1.80 (0.071)
V 8.00 (0.315) 2.00 (0.079) 4.00 (0.157) 3.70 (0.145) 1.80 (0.071)
The component has compliant leads which reduces the risk of stress on W 6.50 (0.256) 2.00 (0.079) 2.50 (0.098) 2.80 (0.110) 1.60 (0.063)
the capacitor due to substrate bending. X
Y
8.00 (0.315)
8.00 (0.315)
2.00 (0.079)
2.00 (0.079)
4.00 (0.157)
4.00 (0.157)
3.00 (0.118)
3.00 (0.118)
1.70 (0.067)
1.70 (0.067)
5 8.00 (0.315) 2.00 (0.079) 4.00 (0.157) 3.00 (0.118) 1.70 (0.067)
6.6 Soldering Conditions A 4.40 (0.173) 1.60 (0.063) 1.20 (0.047) 1.80 (0.071) 0.90 (0.035)
B 4.70 (0.185) 1.70 (0.067) 1.30 (0.051) 3.00 (0.118) 1.50 (0.059)
Dip soldering is permissible provided the solder bath temperature C 4.40 (0.173) 1.60 (0.063) 1.20 (0.047) 1.80 (0.071) 0.90 (0.035)
is 270°C, the solder time < 3 seconds and the circuit board thickness D
E
4.40 (0.173)
0.90 (0.035)
1.60 (0.063)
0.30 (0.012)
1.20 (0.047)
0.30 (0.012)
1.80 (0.071)
0.30 (0.012)
0.90 (0.035)
N/A
≥1.0mm. H 3.20 (0.126) 1.30 (0.051) 0.60 (0.024) 1.50 (0.059) 0.075 (0.003)
I 4.40 (0.173) 1.60 (0.063) 1.20 (0.047) 1.80 (0.071) 0.90 (0.035)
J 2.80 (0.110) 1.10 (0.043) 0.60 (0.024) 1.00 (0.039) 0.50 (0.019)
6.7 Installation Instructions TACmicrochip® K 2.20 (0.087) 0.90 (0.035) 0.40 (0.016) 0.70 (0.028) 0.35 (0.014)
L 2.80 (0.110) 1.10 (0.043) 0.60 (0.024) 1.00 (0.039) 0.50 (0.019)
The upper temperature limit (maximum capacitor surface temperature) Series
M 3.20 (0.126) 1.30 (0.051) 0.60 (0.024) 1.00 (0.039) 0.50 (0.019)
must not be exceeded even under the most unfavorable conditions when Q 3.20 (0.126) 1.30 (0.051) 0.60 (0.024) 1.50 (0.059) 0.075 (0.003)
R 3.20 (0.126) 1.30 (0.051) 0.60 (0.024) 1.50 (0.059) 0.075 (0.003)
the capacitor is installed. This must be considered particularly when it S 4.40 (0.173) 1.60 (0.063) 1.20 (0.047) 1.80 (0.071) 0.90 (0.035)
T 4.70 (0.185) 1.70 (0.067) 1.30 (0.051) 3.00 (0.118) 1.50 (0.059)
is positioned near components which radiate heat strongly (e.g. valves U 3.20 (0.126) 1.30 (0.051) 0.60 (0.024) 1.50 (0.059) 0.075 (0.003)
and power transistors). Furthermore, care must be taken, when bending V 4.40 (0.173) 1.60 (0.063) 1.20 (0.047) 1.80 (0.071) 0.90 (0.035)
Z 2.80 (0.110) 1.10 (0.043) 0.60 (0.024) 0.70 (0.028) 0.35 (0.014)
the wires, that the bending forces do not strain the capacitor housing. Note: SMD ‘J’ Lead = TAJ, TMJ, TPS, TPM, TRJ, TRM, THJ, TLJ, TCJ, TCM, TCO, TCQ
6.8 Installation Position

No restriction. PW
6.9 Soldering Instructions PLP PS PLN
Fluxes containing acids must not be used. PSL
PAD DIMENSIONS: millimeters (inches)

6.9.1 Guidelines for Surface Mount Footprints
Component footprint and reflow pad design for Case Size PSL PLP PS PLN PW+ PW-
Series M 2.50 (0.098) 1.05 (0.041) 0.40 (0.016) 1.05 (0.041) 1.00 (0.039) 1.00 (0.039)
KYOCERA AVX capacitors. N 2.50 (0.098) 1.05 (0.041) 0.40 (0.016) 1.05 (0.041) 1.00 (0.039) 1.00 (0.039)
O 3.60 (0.142) 1.35 (0.053) 0.90 (0.035) 1.35 (0.053) 1.30 (0.051) 1.30 (0.051)
The component footprint is defined as the maximum board area taken up by the K 3.60 (0.142) 1.35 (0.053) 0.90 (0.035) 1.35 (0.053) 1.30 (0.051) 1.30 (0.051)
S 3.60 (0.142) 1.35 (0.053) 0.90 (0.035) 1.35 (0.053) 1.30 (0.051) 1.30 (0.051)
terminators. The footprint dimensions are given by A, B, C and D in the diagram, L 3.90 (0.154) 1.35 (0.053) 1.00 (0.039) 1.55 (0.061) 2.50 (0.098) 2.10 (0.083)
which corresponds to W1 max., A max., S min. and L max. for the component. TLN, TCN
& J-CAP™
T
H
3.90 (0.154)
3.90 (0.154)
1.35 (0.053)
1.35 (0.053)
1.00 (0.039)
1.00 (0.039)
1.55 (0.061)
1.55 (0.061)
2.50 (0.098)
2.50 (0.098)
2.10 (0.083)
2.10 (0.083)
The footprint is symmetric about the center lines. Undertab X 7.70 (0.303) 2.20 (0.087) 2.10 (0.083) 3.40 (0.134) 3.25 (0.128) 3.25 (0.128)
Z 8.00 (0.315) 2.00 (0.079) 4.00 (0.157) 2.00 (0.079) 2.50 (0.098) 2.50 (0.098)
The dimensions x, y and z should be kept to a minimum to reduce rotational 3 7.70 (0.303) 2.20 (0.087) 2.10 (0.083) 3.40 (0.134) 4.75 (0.187) 4.75 (0.187)
4 7.70 (0.303) 2.20 (0.087) 2.10 (0.083) 3.40 (0.134) 4.75 (0.187) 4.75 (0.187)
tendencies while allowing for visual inspection of the component and its 6 15.20 (0.598) 2.65 (0.104) 9.90 (0.390) 2.65 (0.104) 5.50 (0.217) 5.50 (0.217)
8 8.00 (0.315) 2.30(0.096) 3.40 (0.134) 2.30 (0.096) 4.40 (0.173) 4.40 (0.173)
solder fillet.
Dimensions PS (c for F-series) (Pad Separation) and PW (a for F-series) PAD DIMENSIONS F-SERIES: millimeters (inches)
(Pad Width) are calculated using dimensions x and z. Dimension y may vary, Center of nozzle
depending on whether reflow or wave soldering is to be performed. c
For reflow soldering, dimensions PL (b for positive terminal of F-series; b' - + a
for negative terminal of F-series) (Pad Length), PW (a) (Pad Width), and PSL b´ c b
(Pad Set Length) have been calculated. For wave soldering the pad width
Case Size a b b' c Δc*
(PWw) is reduced to less than the termination width to minimize the amount Series U 0.35 (0.014) 0.40 (0.016) 0.40 (0.016) 0.40 (0.016) 0.00
of solder pick up while ensuring that a good joint can be produced. In the M
S
0.65 (0.026)
0.90 (0.035)
0.70 (0.028)
0.70 (0.028)
0.70 (0.028)
0.70 (0.028)
0.60 (0.024)
0.80 (0.032)
0.00
0.00
case of mounting conformal coated capacitors, excentering (Δc) is needed F38,
F91, F92,
P 1.00 (0.039) 1.10 (0.043) 1.10 (0.043) 0.40 (0.016) 0.00
A 1.30 (0.051) 1.40 (0.055) 1.40 (0.055) 1.00 (0.039) 0.00
to except anode tab [ ]. F93, F97,
F98 B 2.30 (0.091) 1.40 (0.055) 1.40 (0.055) 1.30 (0.051) 0.00
C 2.30 (0.091) 2.00 (0.079) 2.00 (0.079) 2.70 (0.106) 0.00
N 2.50 (0.098) 2.00 (0.079) 2.00 (0.079) 4.00 (0.157) 0.00
R·P 1.40 (0.055) 0.60 (0.024) 0.50 (0.020) 0.70 (0.028) 0.20 (0.008)
F95, Q·S 1.70 (0.067) 0.70 (0.028) 0.60 (0.024) 1.10 (0.043) 0.20 (0.008)
NOTE: AUDIO F95 A 1.80 (0.071) 0.70 (0.028) 0.60 (0.024) 1.10 (0.043) 0.20 (0.008)
These recommendations (also in compliance Conformal T 2.60 (0.102) 0.70 (0.028) 0.60 (0.024) 1.20 (0.047) 0.20 (0.008)
B 2.60 (0.102) 0.80 (0.032) 0.70 (0.028) 1.10 (0.043) 0.20 (0.008)
with EIA) are guidelines only. With care and
F72
control, smaller footprints may be consideredfor Conformal R·M 5.80 (0.228) 1.20 (0.047) 1.20 (0.047) 3.90 (0.154) 0.50 (0.020)
reflow soldering. U·C 3.00 (0.118) 1.20 (0.047) 1.20 (0.047) 3.30 (0.130) 0.50 (0.020)
F75
Conformal D 4.10 (0.161) 1.20 (0.047) 1.20 (0.047) 3.90 (0.154) 0.50 (0.020)
R·M 5.80 (0.228) 1.20 (0.047) 1.20 (0.047) 3.90 (0.154) 0.50 (0.020)
Nominal footprint and pad dimensions for each case size are given *In the case of mounting conformal coated capacitors, excentering (Δc)
in the following tables: is needed to except anode tab [ ].
030321

PAD DIMENSIONS: millimeters (inches) 6.10 PCB Cleaning

Ta chip capacitors are compatible with most PCB board cleaning
systems. If aqueous cleaning is performed, parts must be allowed to
PW dry prior to test. In the event ultrasonics are used power levels should be
less than 10 watts per/litre, and care must be taken to avoid vibrational
PLP PS nodes in the cleaning bath.
SECTION 7: EPOXY FLAMMABILITY
PSL
Case Size PSL PL PS PW PWW

Series EPOXY UL RATING OXYGEN INDEX
TCH & THH 9 13.20 (0.520) 2.40 (0.094) 8.40 (0.331) 11.80 (0.465) N/A
J-lead only
TAJ/TMJ/TPS/TPM/TRJ/TRM/THJ TLJ/
TLN/TCJ/TCM/TCN/J-CAP™/TCO/TCQ/ UL94 V-0 35%
THH
J-lead only
I 13.00 (0.512) 3.80 (0.150) 5.40 (0.213) 5.30 (0.210) N/A NLJ/NOJ/NOS/NOM
THH
I 10.60 (0.417) 3.00 (0.118) 4.60 (0.181) 4.00 (0.157) N/A
Undertab only
SECTION 8: QUALIFICATION APPROVAL STATUS
DESCRIPTION STYLE SPECIFICATION
PW + - Surface mount capacitors TAJ
CECC 30801 - 005 Issue 2
CECC 30801 - 011 Issue 1
PKW PK
PW + -
PL PS PL
PSL
Case Size PSL PL PS PKW PW PK

Series
TCH & THH 9 11.00(0.433) 1.70(0.067) 7.60(0.300) 10.60(0.417) 3.00(0.118) 4.60(0.181)
Undertab only
042120

Product Safety Information Datasheet
Material Data and Handling
This should be read in conjunction with the Product Datasheet. 4. Fire Characteristics
Failure to observe the ratings and the information on this sheet may
Primary
result in a safety hazard.
Any component subject to abnormal power dissipation may
1. Material Content • self ignite
Solid Tantalum and OxiCap® capacitors do not contain liquid • become red hot
hazardous materials. • break open or explode emitting flaming or red hot material, solid,
The operating section contains: molten or gaseous.
Fumes from burning components will vary in composition depending
Tantalum/Niobium Graphite/carbon
Tantalum/Niobium oxide Conducting paint/resins on the temperature, and should be considered to be hazardous,
Manganese dioxide Fluoropolymers (not TAC) although fumes from a single component in a well ventilated area
are unlikely to cause problems.
The encapsulation contains:
TAC - epoxy molding compound, solder/tin coated terminal pads Secondary
TAJ, TMJ, TPS, TPM, TRJ, TRM, TLJ, TLN, TCJ, TCM, TCN, Induced ignition may occur from an adjacent burning or red hot
J-CAP™, TCO, TCQ, NLJ, NOJ, NOS and NOM - epoxy molding component. Epoxy resins used in the manufacture of capacitors
compound, tin/solder coated terminal pads give off noxious fumes when burning as stated above. Wherever
possible, capacitors comply with the following:
TAP - solder, solder coated terminal wires, epoxy dipped resin BS EN 60065
The capacitors do not contain PBB or PBBO/PBBE. The solder alloys UL 492.60A/280
may contain lead. LOI (ASTM D2863-70) as stated in the datasheets.
2. Physical Form 5. Storage

These capacitors are physically small and are either rectangular KYOCERA AVX Tantalum dielectric chip capacitors are unaffected
with solderable terminal pads, or cylindrical or bead shaped with by the following storage condition for 2 years:
solderable terminal wires. Temperature: -10°C – +50°C
Humidity: 75% RH maximum
3. Intrinsic Properties Atmospheric pressure: 860 mbar ~ 1060mbar
Operating Tantalum and OxiCap® capacitors exhibit a very low random failure rate
Both Tantalum and OxiCap® capacitors are polarized devices and operate after long periods of storage and apart from this there are no known
satisfactorily in the correct d.c. mode. They will withstand a limited modes of failure under normal storage conditions. All capacitors will
application of reverse voltage as stated in the datasheets. However, a withstand any environmental conditions within their ratings for the
reverse application of the rated voltage will result in early short circuit periods given in the detail specifications. Storage for longer periods
failure and may result in fire or explosion. Consequential failure of other under high humidity conditions may affect the leakage current of resin
associated components in the circuit e.g. diodes, transformers, etc. protected capacitors. Solderability of solder coated surfaces may be
may also occur. When operated in the correct polarity,a long period of affected by storage of excess of 2 years. If F-series capacitors should
satisfactory operation will be obtained but failure may occur for any of be stored more than 1 year please contact KYOCERA AVX for advice.
the following reasons:
6. Moisture Sensitivity Level
• normal failure rate • temperature too high MSL is defined in J-STD-020. It is applicable to non-hermetic surface
• surge voltage exceeded • ripple rating exceeded mount devices, and is focussed on parts in plastic packages.
• reverse voltage exceeded
The basic concept is that a plastic package may contain moisture,
If this failure mode is a short circuit, the previous conditions apply. which can become a high pressure vapour during solder reflow.
If the adjacent circuit impedance is low, voltage or current surges If this occurs, the vapor pressure may cause internal cracking or
may exceed the power handling capability of the capacitor. For damage to the device. It can also result in external steam jets from
this reason capacitors in circuits of below 1Ω/V should be derated the package, and these may displace other nearby components on
by minimum 50% for tantalum and 20% for OxiCap®. Precautions the circuit board during the solder process. A common industry
should be taken to prevent reverse voltage spikes. Where capacitors reference for this is “popcorning”.
may be subjected to fast switched, low impedance source voltages,
the manufacturers advice should be sought to determine the most KYOCERA AVX solid electrolyte chips (standard tantalum,
suitable capacitors for such applications. conductive polymer, OxiCap®), which are considered MSL 3, MSL 4
or MSL 5 (ref. product datasheet) are molded in plastic packages,
Non-operating and are distributed in packaging including a moisture barrier.
Both Tantalum and OxiCap® capacitors contain no liquids or noxious KYOCERA AVX solid tantalum TACmicrochip® (TAC, TPC) are
gases to leak out. However, cracking or damage to the encapsulation considered MSL 1 and supplied in packaging with a moisture barrier.
may lead to premature failure due to ingress of material such as TLC series is considered MSL 3 and is distributed in packaging
cleaning fluids or to stresses transmitted to the tantalum anode. including a moisture barrier.
052919

Material Data and Handling
The series, which are considered MSL 3, MSL 4 or MSL 5 are
delivered in vacuum sealed bag with calculated shelf life:
a) 12 months at < 40°C and < 90% relative humidity (RH)
b) 24 months at < 30°C and < 70% relative humidity (RH)
7. Disposal
Incineration of epoxy coated capacitors will cause emission
of noxious fumes and metal cased capacitors may explode
due to build up of internal gas pressure. Disposal by any other
means normally involves no special hazards. Large quantities
may have salvage value.
8. Unsafe Use
Most failures are of a passive nature and do not represent
a safety hazard. A hazard may, however, arise if this failure
causes a dangerous malfunction of the equipment in which the
capacitor is employed. Circuits should be designed to fail safe
under the normal modes of failure. The usual failure mode is
an increase in leakage current or short circuit. Other possible
modes are decrease of capacitance, increase in dissipation
factor (and impedance) or an open-circuit. Operations outside
the ratings quoted in the datasheets represents unsafe use.
9. Handling
Careless handling of the cut terminal leads could result in
scratches and/or skin punctures. Hands should be washed
after handling solder coated terminals before eating or
smoking, to avoid ingestion of lead. Capacitors must be kept
out of the reach of small children.
Care must be taken to discharge capacitors before handling as
capacitors may retain a residual charge even after equipment
in which they are being used has been switched off. Sparks
from the discharge could ignite a flammable vapor.
052919

Environmental Information
KYOCERA AVX has always sought to minimize the environmental impact of safety benefits of using these materials to provide fire retardancy during the
its manufacturing operations and of its capacitors supplied to customers life of the product, far outweigh the possible risks to the environment and
throughout the world. We have a policy of preventing and minimizing waste human health.
streams during manufacture, and recycling materials wherever possible.
We actively avoid or minimize environmentally hazardous materials in our 5. Nickel Alloy
production processes. It is intended that all case sizes will be made with a high copper alloy
termination. Some case sizes are supplied now with this termination, and
1. Material Content other sizes may be available. Please contact KYOCERA AVX if you prefer this.
For customers wishing to assess the environmental impact of KYOCERA
AVX’s capacitors contained in waste electrical and electronic equipment, 6. Recycling
the following information is provided: Surface mount tantalum capacitors Surface mount Tantalum and OxiCap® capacitors have a very long service life
contain: with no known wear-out mechanism, and a low failure rate. However, parts
contained in equipment which is of no further use will have some residual
• Tantalum/Niobium and Tantalum/Niobium oxide value mainly because of the Tantalum metal or niobium oxide contained. This
• Manganese dioxide can be recovered and recycled by specialist companies. The silver and nickel
• Carbon/graphite or copper alloy will also have some value. Please contact KYOCERA AVX if
• Silver you require assistance with the disposal of parts. Packaging can by recycled
• Tin/Tin-lead alloy plating as described above.
• Nickel-iron alloy or Copper alloy depending on design (consult factory
for details) 7. Disposal
• Polymers including fluorinated polymers Surface mount Tantalum and OxiCap® capacitors do not contain any
• Epoxide resin encapsulant liquids and no part of the devices is normally soluble in water at neutral pH
values. Incineration will cause the emission of noxious fumes and is not
The encapsulant is made fire retardant to UL 94 V-0 by the inclusion of inert
recommended except by specialists. Landfill may be considered for disposal,
mineral filler and fire retardants.
bearing in mind the small lead content.
2. Packaging Material Under certain extreme physical conditions it is possible to generate ignition
The component packing tape is recyclable Polycarbonate and the sealing tape of Tantalum, Niobium and Niobium oxide capacitors. These physical
is a laminate of halogen-free polymers. The reels are recyclable polystyrene, conditions relate to high-speed impact and although not considered to be a
and marked with the recycling symbol. The reels are overpacked in recyclable normal operating occurrence may occur as a method of material(s) recovery.
fiber board boxes. None of the packing contains heavy metals. Therefore appropriate safeguards procedures and methodologies need to be
adopted to eliminate any risks of material ignition.
3. Lead (Pb)
Parts supplied today are electroplated over the terminal contact area with For further information, please contact your local KYOCERA AVX sales office
100% fused matte Tin (Sn). Parts with SnPb termination finish are available or representative.
upon request only. Contact KYOCERA AVX for availability of parts with SnPb
termination finish. 8. Typical Component Weight by Case Sizes
The approximate weight of capacitor by case size is in the table below.
4. Fire Retardants If the weight of specific part number is required, please contact manufacturer.
A combustible encapsulant free of antimony trioxide and organic bromide
compound are supplied today. KYOCERA AVX believes that the health and
TCJ NOJ TAC

TAJ, TMJ TPS, TPM TCN F91, F93
Case TLN TCO TCM NOS NOM TLC F38 F72 F75 F92 F95 F98 F98–AJ6 TCH THH
TRJ TLJ, THJ TRM J-CAP™ F97
Size TCQ NLJ TPC
Typical Weight (mg)
A 29 28 25 57.3 28 19 37
B 68 72 57 83.6 65 36 68
C 166 137 154 240 160
D 290 298 278 265 14 400 300
E 512 527 472 474 392 402 0.5
F 148 109
G 28 25 23
H 52 51 51 15.2
I 12 543
J 5.9
K 17 22 15 20 2.8
L 41 38 9
M 10 10 11.3 5.7 330 6 8
N 9 10 9 10 350
O 11
P 15 15 12 9 18
Q 20
R 10 10 23.4 180 670 7
S 19 27 18 25 17 12.4 25 13 14
T 35 47 39 43 32 65.8 41
U 738 673 642 679 8.5 1.2 160 1.6
V 641 649 655 625 510 16.4
W 99 100 82
X 152 151 190 126
Y 223 237 215 178
Z 190 3.9
3 251
4 426 355
5 429
6 1056
8 355
9 2185 2210
081021

Product Safety and Environmental Information Data

Environmental Information
9. RoHS Compliance Substances Taping Code RoHS Compliance
9.1 Tantalum & Niobium Oxide Capacitors Cadmium and cadmium compounds All YES
(excluding F-series) A,B,Y,P YES
KYOCERA AVX can declare that we do not add any materials Heavy
Lead and lead
R,S,T,U
YES, since production
compounds date 1/1/04
from the list below to series TAJ, TMJ, TPS, TPM, TRJ, TRM, Metals
K,H NO
THJ, TLJ, TLN, TCJ, TCM, TCN, J-CAPTM, TCO, TCQ, TAC, TLC,
Mercury and mercury compounds All YES
TPC, NLJ, NOJ, NOS and NOM during production, so they are not
Hexavalent chromium compounds All YES
contained in any significant level.
Polychlorinated biphenyls (PCB) All YES
Chlorinated Polychlorinated naphthalenes (PCN) All YES
9.2 F-Series Eco-Products “GeoCap” organic
Chlorinated parafﬁns (CP) All YES
KYOCERA AVX promotes environmentally conscious practices. compounds
Mirex (Perchlordecone) All YES
KYOCERA AVX offers “GeoCap”, witch has completely lead free Polybrominated biphenyls (PBB) All YES
Brominated
terminals and contains no polyvinyl chloride in the sleeve. organic Polybrominated diphenylethers
compounds All YES
(PBDE)
F-SERIES TANTALUM CAPACITORS

Type • Classification Series Lead-Free Compliance Anti Polyvinyl Chloride Compliance
Surface Reisin-Molded type F38, F91, F92, F93, F97, F98
Complied Complied
Mount type Conformal Coated type AUDIO F95, F95, F72, F75
F-SERIES TANTALUM CAPACITORS CORRESPONDING TO ROHS DIRECTIVE

Resin-Molded Chip Conductive Polymer Facedown
Conformal Coated Chip Audio Facedown Terminal Resin-
F91/F92/F93/F97 Terminal Resin-Molded Chip
F95/F95/F72/F75 Series Molded Chip F98 Series
Series F38 Series
Compliance with
Compliant Compliant Compliant Compliant
RoHS Directive
U Case Cu/ Ni/ Au/Sn plating M, U Case Cu/ Ni/ Au/Sn plating M,
42 Alloy/ Ni/ Sn plating Ni/ Sn-Cu solder
S Case Cu/ Ni/Au plating S Case Cu/ Ni/Au plating
Construction
of Electrode Sn thickness 5μm Sn-Cu thickness 30μm U Case Sn thickness 5μm U Case Sn thickness 5μm
Terminal Plating type matte (Solder dipping) M, S Case Au thickness 0.05μm M, S Case Au thickness 0.05μm
No heat treatment No heat treatment after Plating type matte Plating type matte
after plating Solder dipping No heat treatment after plating No heat treatment after plating
Lead (Pb)
Chromium (VI)
Mercury
Does not contain Does not contain Does not contain Does not contain
Cadmium
PBB
PBDE
* LEVEL 1 to LEVEL 3
MSL
If you need detailed information
(IPC/ JEDEC LEVEL 3 LEVEL 3 LEVEL 3
about MSL LEVEL,
J-STD-020)
please contact us.
011822

Tantalum & Niobium Oxide Capacitors (excluding F-series)
Tape & Reel Packaging
Tape and reel packaging for automatic component placement. TAPE SPECIFICATION
Please enter required Suffix on order. Bulk packaging is not Tape dimensions comply to EIA 481-1 Dimensions A0 and B0 of the
available. pocket and the tape thickness, K, are dependent on the component
size. Tape materials do not affect component solderability during
storage. Carrier Tape Thickness <0.4mm.
TAPING SUFFIX TABLE TAJ, TMJ, TPS, TPM, TRJ, TRM, THJ, TLJ, TLN
TCJ, TCM, TCN, J-CAPTM, TCO, TCQ, NLJ, NOJ, NOS, NOM
180mm (7") reel 330mm (13") reel 180mm (7") reel
Tape width P Tin Termination Tin Termination Gold Termination
Case Size
mm mm Automotive Automotive
Suffix Qty. Suffix Qty. Suffix Qty.
Suffix Suffix
A 8 4 R T 2,000 S U 8,000 A 2,000
B 8 4 R T 2,000 S U 8,000 A 2,000
C 12 8 R T 500 S U 3,000 A 500
D 12 8 R T 500 S U 2,500 A 500
E 12 8 R T 400 S U 1,500 A 400
F 12 8 R – 1,000 S – 4,000 A 1,000
G 8 4 R – 2,500 S – 10,000 A 2,500
H 8 4 R – 2,500 S – 10,000 A 2,500
K 8 4 R – 3,000 S – 13,000 A 3,000
L 8 4 R – 2,500 S – 10,000 A 2,500
M 8 4 R – 4,000 S – 13,000 A 4,000
N 8 4 R – 3,000 S – 13,000 A 3,000
O 8 4 R – 3,000 S – 13,000 – –
P 8 4 R – 2,500 S – 10,000 A 2,500
R 8 4 R – 2,500 S – 10,000 A 2,500
S 8 4 R – 2,500 S – 10,000 A 2,500
T 8 4 R – 2,500 S – 10,000 A 2,500
U 16 8 R – 400 – – – – –
V 12 8 R – 400 S – 1,500 A 400
W 12 8 R – 1,000 S – 5,000 A 1,000
X 12 8 R – 1,000 S – 5,000 A 1,000
Y 12 8 R – 1,000 S – 4,000 A 1,000
Z 12 8 R – 1,000 S – 5,000 – –
3 16 8 R – 800 S – TBD – –
4 16 8 R – 800 S – TBD – –
5 12 8 R – 400 S – 1,500 – –
6 24 12 R – 500 S – TBD – –
8 16 8 R – 800 S – TBD – –
TAPING SUFFIX TABLE TAC AND TLC

108mm (4.25") reel 180mm (7") reel 108mm (4.25") reel & 180mm (7") reel & 100%
Tape width P Tin Termination Tin Termination Gold Termination Gold Termination
Case Size
mm mm
Suffix Qty. Suffix Qty. Suffix Qty. Suffix Qty.
A 8 4 XTA 500 RTA 2,000 FTA 500 ATA 2,000
B 8 4 XTA 500 RTA 2,500 FTA 500 ATA 2,500
C 8 4 XTA 500 RTA 3,500 - - - -
D 8 4 XTA 500 RTA 2,500 - - - -
H 8 4 XTA 500 RTA 3,500 FTA 500 ATA 3,500
I 8 4 XTA 500 RTA 2,500 FTA 500 ATA 2,500
J 8 4 XTA 500 RTA 3,500 FTA 500 ATA 3,500
K 8 2 QTA 1,000 PTA 10,000 NTA 1,000 MTA 10,000
L 8 4 XTA 500 RTA 3,500 FTA 500 ATA 3,500
M 8 4 XTA 500 RTA 2,500 FTA 500 ATA 2,500
N 8 2 QTA 1,000 PTA 10,000 - - - -
Q 8 4 XTA 500 RTA 2,500 - - - -
R 8 4 XTA 500 RTA 2,500 FTA 500 ATA 2,500
S 8 4 XTA 500 RTA 2,500 - - - -
T 8 4 XTA 500 RTA 2,500 FTA 500 ATA 2,500
U 8 4 XTA 500 RTA 3,500 FTA 500 ATA 3,500
V 8 4 XTA 500 RTA 2,500 FTA 500 ATA 2,500
Z 8 2 QTA 1,000 PTA 10,000 - - - -
Under Development
CHIP TRAY (WAFFLE) TABLE TLC

Chip Tray Tin Termination Gold Termination
Case Size
Qty. Suffix Suffix
E Each HTA –
030321

Tantalum & Niobium Oxide Capacitors
(excluding F-series) – Tape & Reel Packaging
TAPING SUFFIX TABLE TPC
Tape width
Case Size P mm Tin Termination Tin Termination Gold Termination Gold Termination
mm
H 8 4 Xxxxx 500 Rxxxx 3,500 Fxxxx 500 Axxxx 3,500
K 8 2 Qxxxx 1,000 Pxxxx 10,000 Nxxxx 1,000 Mxxxx 10,000
L 8 4 Xxxxx 500 Rxxxx 3,500 Fxxxx 500 Axxxx 3,500
R 8 4 Xxxxx 500 Rxxxx 2,500 Fxxxx 500 Axxxx 2,500
Note: xxxx = ESR value in Milliohms
TAPING SUFFIX TABLE TLC

Tape width
Case Size P mm Tin Termination Tin Termination Gold Termination Gold Termination
mm
L 8 4 Xxxxx 500 Rxxxx 3,500 Fxxxx 500 Axxxx 3,500
Note: xxxx = ESR value in Milliohms
080420

PLASTIC TAPE DIMENSIONS TAJ, TMJ, TPS, TPM, TRJ, TRM, THJ, TLJ, TLN,
TCJ, TCM, TCN, J-CAPTM, TCO, TCQ, NLJ, NOJ, NOS AND NOM
Case A0±0.10 B0±0.10 K±0.10 W±0.30 E±0.10 F±0.05 G min. P±0.10 P2±0.05 P0±0.10 D +0.20
-0.00 D1 +0.25
-0.00
A 1.83 3.57 1.87 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
B 3.15 3.77 2.22 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
C 3.45 6.40 2.92 12.00 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
D 4.48 7.62 3.22 12.00 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
E 4.50 7.50 4.50 12.00 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
F 3.35 6.40 2.20 12.00 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
G 1.83 3.57 1.65 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
H 3.15 3.77 1.66 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
K 1.95 3.55 1.15 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
L 3.10 3.80 1.30 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
M 1.60 2.35 1.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
N 1.60 2.30 1.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
O 1.95 3.55 0.80 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
P 1.65 2.45 1.60 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
R 1.65 2.45 1.30 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
S 1.95 3.55 1.30 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
T 3.20 3.80 1.30 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
U 6.19 7.66 4.72 16.00 1.75 7.50 0.75 8.00 2.00 4.00 1.50 1.50
V 6.43 7.44 3.84 12.00 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
W 3.57 6.40 1.65 12.00 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
X 4.67 7.62 1.65 12.00 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
Y 4.67 7.62 2.15 12.00 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
Z 4.67 7.62 1.65 12.00 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
3 6.25 7.88 2.25 16.00 1.75 7.50±0.1 0.75 8.00 2.00±0.1 4.00 1.50 1.50
4 6.25 7.88 2.25 16.00 1.75 7.50±0.1 0.75 8.00 2.00±0.1 4.00 1.50 1.50
5 4.50 7.50 4.50 12.00 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
6 8.55 15.60 2.25 24.00 1.75 11.50 0.75 12.00 2.00 4.00 1.50 1.50
8 6.25 7.88 2.25 16.00 1.75 7.50±0.1 0.75 8.00 2.00±0.1 4.00 1.50 1.50
PLASTIC TAPE DIMENSIONS TAC, TLC AND TPC

Case A0±0.10 B0±0.10 K±0.10 W±0.30 E±0.10 F±0.05 G min. P±0.10 P2±0.05 P0±0.10 D +0.20
-0.00 D1 +0.20
-0.00
A 1.83±0.10 3.57±0.10 1.87±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
B 3.15±0.10 3.77±0.10 1.66±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
C 1.95±0.10 3.55±0.10 1.15±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
D 1.95±0.10 3.60±0.10 0.90±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
H 1.65±0.10 2.45±0.10 1.10±0.05 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
I 1.95±0.10 3.60±0.10 0.90±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
J 1.05 +0.10
-0.00 1.90 +0.10
-0.00 0.80 +0.10
-0.00 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 0.80
K 0.75 +0.15
-0.00 1.26 +0.10
-0.00 0.67 +0.10
-0.00 8.00 1.75 3.50 0.75 2.00 2.00 2.00 1.50 0.50
L 1.05 +0.10
-0.00 1.90 +0.10
-0.00 1.05 +0.10
-0.00 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 0.80
M 1.05 +0.10
-0.00 2.45±0.10 1.05 +0.10
-0.00 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 0.80
Q 1.65±0.10 2.45±0.10 1.30±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
R 1.65±0.10 2.45±0.10 1.60±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
S 1.95±0.10 3.55±0.10 1.30±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
T 3.20±0.10 3.80±0.10 1.30±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
U 1.65±0.10 2.45±0.10 0.80±0.05 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
V 1.95±0.10 3.60±0.10 0.90±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
X 1.83±0.10 3.57±0.10 1.87±0.10 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
Z 1.75 +0.05
-0.00 1.90 +0.10
-0.00 0.67 +0.10
-0.00 8.00 1.75 3.50 0.75 2.00 2.00 2.00 1.50 0.50
Under development
CHIP TRAY (WAFFLE) TABLE TLC
X Pocket Y Pocket Z Pocket A Pocket

Case Array
Size Size Depth Draft Angle
E 0.76mm ±0.05mm 0.43mm ±0.05mm 0.41mm ±0.05mm 5° ±1/2° 20 x 20 (400)
030321

REEL DIMENSIONS
Reel Size Tape A B C W t
180mm (7") 16mm 180±2.00 50 min 13.0±0.50 16.4+2.0/-0 2.00±0.50
180mm (7") 12mm 180±2.00 50 min 13.0±0.50 12.4+1.5/-0 2.00±0.50
180mm (7") 8mm 180±2.00 50 min 13.0±0.50 8.4+1.5/-0 2.00±0.50
330mm (13") 12mm 330±2.00 50 min 13.0±0.50 12.4+1.5/-0 2.00±0.50
330mm (13") 8mm 330±2.00 50 min 13.0±0.50 8.4+1.5/-0 2.00±0.50
TACmicrochip®
108mm (4.25") 8mm 108±2.00 50 min 13.0±0.50 8.4+1.5/-0 1.50±0.50
180mm (7") 8mm 180±2.00 50 min 13.0±0.50 8.4+1.5/-0 1.50±0.50
COVER TAPE NOMINAL DIMENSIONS

Thickness: 75μm
Width of tape: 5.5mm (8mm tape)
9.5mm (12mm tape)
13.5mm (16mm tape)
TCH AND THH PACKAGING SPECIFICATION OVERALL CHIP TRAY SIZE

The dimensions of the tray see in the figure below. Tolerance of dimensions Size Height Flatness
are ±0.1 mm. Both case size “9” and “I” have 40 pcs per tray. 50.80mm±0.10mm 3.96mm +0.05mm 0.10mm
-0.08mm
PLASTIC CHIP TRAY
anode
E Case
080520

F-Series Capacitors – Tape & Reel Packaging
F-Series Tantalum Capacitors

TAPING QUANTITY TABLE – TYPE NUMBERING SYSTEM
F-SERIES CAPACITORS 1 2 3 4 5 6 7 8 9 10 11 12 13 14
F 9 3 1 A 1 0 6 M A A F95 series
180mm (7") Reel 330mm (13") Reel have single-side electrode
Tin Termination Tin Termination structures as illustrated
Series Case Size F 9 5 0 G 3 3 7 M A A A Q 2 below, code "AQ2" is added
Qty. Qty. at the end of each type
Series Rated capacitance Case code number to distinguish from
U 10,000 – other case sizes.
F38, F98 Rated voltage
M, S 4,000 – Capacitance tolerance
P 3,000 8,000
F92
A, B 2,500 8,000 Their electrode area at the
cover tape side becomes
A 2,000 8,000 lessened, accordingly
F91, F93, F97 B 2,000 6,000
C, N 500 2,500 Tape
Tape Applicable Case Size
R, P 3,000 10,000 Reel Dia Reel Dia F 9 1 , F 9 2 ,
F95 Width Polarity F95 F72
Q, S, A, T 2,500 10,000 180 330 F 9 3 , F 9 7 ,
AUDIO F95 (mm) AUDIO F95 F75
B 2,000 8,500 mm mm F 3 8 , F 9 8
( )
Anode is at R, P, Q
R 1,000 – U, M, S
F72 8 R opposite side A E S, A, T –
M 500 – of feeding holes
P, A, B
B
F75 C, D, M, R, U 500 –
( )
Anode is at U, C
( )*: Export packaging. There are some differences between actual minimum 12 R opposite side C G C, N – D, R
quantity and above list. Please confirm before you order. of feeding holes M
REEL DIMENSIONS (mm)
Reel Diameter
Item
180φ 330φ 2 0.5
13 0.2 Note: The above shows the dimensions of 180
A φ180+0
+3 φ330±2 50MIN
reel. In case of 330 reel, the appearance
shape is slightly different.
Tape Width
Item
8 12 W2
W1 9.0±0.3 13±0.3
W2 11.4±1.0 15.4±1.0 A W1
CARRIER TAPE DIMENSIONS (mm)

4.0 0.1
4.0 0.1 1.75 0.1 0.2 to 0.3 1.5 +0.1 1.75 0.1
1.5 +0.1
-0
-0
t3 2.0 0.05
2.0 0.05
F F
W W
B B
A P1 A P1
t2 t2
F91, F92, F93, F97, F98 M, F38 M F95, AUDIO F95, F72, F75
Type Case Code W A B F P1 t2
1.75 0.1
t2 4.0 0.1 t3 4.0 0.1 2.0 0.05 R 1.05 Max.

1.5±0.2 2.6±0.2
P 1.5 Max.
+0.1
1.5 -0
1.75 0.1
F95 Q, S 2.0±0.2 3.6±0.2 1.5 Max.
A 8.0±0.3 2.1±0.2 3.7±0.2 3.5±0.05 4.0±0.1 2.0 Max.
1.5 -0
+0.1
F AUDIO F95
W F W
B T 3.0±0.2 3.75±0.2 1.5 Max.
A B
A
B 3.25±0.2 3.7±0.2 2.4 Max.
R 6.5±0.2 7.6±0.2 2.2 Max.
P1
P1 F72 12.0±0.3 5.5±0.1 8.0±0.1
t2 M 6.6±0.2 7.8±0.2 2.5 Max.
F98 U, F38 U F98 S, F38 S U 2.7 Max.
3.7±0.2 7.6±0.2
C 3.6 Max.
Case Code W A B F P1 t2 t3 F75 D 12.0±0.3 4.8±0.2 7.9±0.2 5.5±0.1 8.0±0.1 3.9 Max.
U 8.0±0.3 0.73±0.08 1.20±0.05 3.5±0.05 2.0±0.1 0.8 Max. – M 6.6±0.2 7.6±0.2 3.3 Max.
M 8.0±0.3 0.97±0.05 1.85±0.05 3.5±0.05 4.0±0.1 1.3 Max. 0.20±0.05 R 6.7±0.2 7.6±0.2 4.6 Max.
S 8.0±0.3 1.35±0.1 2.15±0.1 3.5±0.1 4.0±0.1 1.4 Max. 0.2 to 0.3
P 8.0±0.3 1.55±0.1 2.3±0.1 3.5±0.05 4.0±0.1 (1.7 Max.) 0.2 to 0.3
A 8.0±0.3 1.9±0.1 3.5±0.1 3.5±0.05 4.0±0.1 2.1 Max. (1.7) 0.2 to 0.3
B 8.0±0.3 3.3±0.1 3.8±0.1 3.5±0.05 4.0±0.1 2.4 Max. (1.7) 0.2 to 0.3
C 12.0±0.3 3.6±0.1 6.3±0.1 5.5±0.05 8.0±0.1 2.9 Max. 0.2 to 0.3
N 12.0±0.3 4.8±0.1 7.7±0.1 – – 3.5 Max. 0.2 to 0.3
011422

TAP/TEP TECHNICAL SUMMARY AND
APPLICATION GUIDELINES
TAP/TEP Technical Summary and Application Guidelines
SECTION 1: ELECTRICAL CHARACTERISTICS AND EXPLANATION OF TERMS
1.1 CAPACITANCE
1.1.1 Rated capacitance (CR) 1.1.3 Capacitance tolerance

This is the nominal rated capacitance. For tantalum capacitors This is the permissible variation of the actual value of the
it is measured as the capacitance of the equivalent series capacitance from the rated value.
circuit at 20°C in a measuring bridge supplied by a 120 Hz
source free of harmonics with 2.2V DC bias max. 1.1.4 Frequency dependence of the capacitance
The effective capacitance decreases as frequency increases.
1.1.2 Temperature dependence on the capacitance Beyond 100 kHz the capacitance continues to drop until
The capacitance of a tantalum capacitor varies with resonance is reached (typically between 0.5-5 MHz depending
temperature. This variation itself is dependent to a small extent on the rating). Beyond this the device becomes inductive.
on the rated voltage and capacitor size. See graph below for
typical capacitance changes with temperature.
Typical Capacitance vs. Temperature Typical Curve Capacitance vs. Frequency
1.4
15
10 1.2
% Capacitance
5
1.0
1.0 F 35V
CAP ( F)
0
0.8
-5
-10 0.6
-15
0.4
100Hz 1kHz 10kHz 100kHz
-55 -25 0 25 50 75 100 125 Frequency
Temperature (°C)
1.2 VOLTAGE
1.2.1 Rated DC voltage (VR) Category Voltage vs. Temperature
This is the rated DC voltage for continuous operation up to +85°C.
100
1.2.2 Category voltage (VC)
This is the maximum voltage that may be applied continuously to a
Percent of 85°C RVDC1 (VR)
capacitor. It is equal to the rated voltage up to +85°C, beyond which 90

it is subject to a linear derating, to 2/3 VR at 125°C.
1.2.3 Surge voltage (VS) 80

This is the highest voltage that may be applied to a capacitor for
short periods of time. The surge voltage may be applied up to 10 70
times in an hour for periods of up to 30 seconds at a time. The surge
voltage must not be used as a parameter in the design of circuits in
which, in the normal course of operation, the capacitor is periodically 60
charged and discharged.
50
75 85 95 105 115 125
Temperature °C
052919

1.2.5 Reverse voltage and non-polar operation

85°C 125°C
The reverse voltage ratings are designed to cover exceptional
Rated Surge Category Surge conditions of small level excursions into incorrect polarity. The
Voltage Voltage Voltage Voltage
(V DC) (V DC) (V DC) (V DC)
values quoted are not intended to cover continuous reverse
operation.
2 2.6 1.3 1.7
3 4 2 2.6 The peak reverse voltage applied to the capacitor must not
4 5.2 2.6 3.4 exceed:
6.3 8 4 5
10 13 6.3 9
10% of rated DC working voltage to a maximum of
16 20 10 12 1V at 25°C
20 26 13 16 3% of rated DC working voltage to a maximum of
25 33 16 21 0.5V at 85°C
35 46 23 28
50 65 33 40 1% of category DC working voltage to a maximum of
0.1V at 125°C
1.2.4 Effect of surges 1.2.6 Non-polar operation

The solid Tantalum capacitor has a limited ability to withstand If the higher reverse voltages are essential, then two capacitors,
surges (15% to 30% of rated voltage). This is in common with each of twice the required capacitance and of equal tolerance
all other electrolytic capacitors and is due to the fact that and rated voltage, should be connected in a back-to-back
they operate under very high electrical stress within the oxide configuration, i.e., both anodes or both cathodes joined together.
layer. In the case of ‘solid’ electrolytic capacitors this is further This is necessary in order to avoid a reduction in life expectancy.
complicated by the limited self healing ability of the manganese
1.2.7 Superimposed AC voltage (Vrms) - Ripple Voltage
dioxide semiconductor.
This is the maximum RMS alternating voltage, superimposed on
It is important to ensure that the voltage across the terminals a DC voltage, that may be applied to a capacitor. The sum of the
of the capacitor does not exceed the surge voltage rating at any DC voltage and the surge value of the superimposed AC voltage
time. This is particularly so in low impedance circuits where the must not exceed the category voltage, Vc. Full details are given in
capacitor is likely to be subjected to the full impact of surges, Section 2.
especially in low inductance applications. Even an extremely
short duration spike is likely to cause damage. In such situations 1.2.8 Voltage derating
it will be necessary to use a higher voltage rating. Refer to section 3.2 (pages 281-284) for the effect of voltage
derating on reliability.
1.3 DISSIPATION FACTOR AND TANGENT OF LOSS ANGLE (TAN D)
1.3.1 Dissipation factor (DF) 1.3.3 Frequency dependence of dissipation factor

Dissipation factor is the measurement of the tangent of the Dissipation Factor increases with frequency as shown in the
loss angle (Tan δ) expressed as a percentage. typical curves below.
The measurement of DF is carried out at +25°C and 120 Hz
with 2.2V DC bias max. with an AC voltage free of harmonics. Typical Curve-Dissipation Factor vs. Frequency
The value of DF is temperature and frequency dependent. 100
1.3.2 Tangent of loss angle (Tan δ) 50

This is a measure of the energy loss in the capacitor. It is
expressed as Tan δ and is the power loss of the capacitor V
V
10 V
25
divided by its reactive power at a sinusoidal voltage of 20 F 35

F
F
10
3
0
specified frequency. (Terms also used are power factor, loss 1.
3.
DF%
factor and dielectric loss, Cos (90 - δ) is the true power factor.) 10
The measurement of Tan is carried out at +20°C and 120 Hz
with 2.2V DC bias max. with an AC voltage free of harmonics. 5
1
100Hz 1kHz 10kHz 100kHz
Frequency
041420

1.3.4 Temperature dependence of dissipation factor Typical Curves-Dissipation Factor vs. Temperature
Dissipation factor varies with temperature as the typical curves
show to the right. For maximum limits please refer to ratings
tables. 10
100 F/6V
DF %
5
1 F/35V
0
-55 -40 -20 0 20 40 60 80 100 125
Temperature C
1.4 IMPEDANCE, (Z) AND EQUIVALENT SERIES RESISTANCE (ESR)
1.4.1 Impedance, Z 1.4.3 Frequency dependence of impedance and ESR

This is the ratio of voltage to current at a specified frequency.Three ESR and impedance both increase with decreasing frequency.At
factors contribute to the impedance of a tantalum capacitor; the lower frequencies the values diverge as the extra contributions to
resistance of the semiconducting layer, the capacitance, and the impedance (resistance of the semiconducting layer, etc.) become
inductance of the electrodes and leads. more significant. Beyond 1 MHz (and beyond the resonant point
At high frequencies the inductance of the leads becomes a limiting of the capacitor) impedance again increases due to induction.
factor. The temperature and frequency behavior of these three
factors of impedance determine the behavior of the impedance Z.
The impedance is measured at 25°C and 100 kHz.
1.4.2 Equivalent series resistance, ESR

Resistance losses occur in all practical forms of capacitors. Frequency Dependence of Impedance and ESR
These are made up from several different mechanisms, including 1k
resistance in components and contacts, viscous forces within
the dielectric, and defects producing bypass current paths. To
express the effect of these losses they are considered as the 100
ESR of the capacitor. The ESR is frequency dependent. The ESR
can be found by using the relationship:
10 0.1 µF
ESR ( )
0.33 µF
where f is the frequency in Hz, and C is the capacitance in farads. 1 1 µF
The ESR is measured at 25°C and 100 kHz.
10 µF
ESR is one of the contributing factors to impedance, and at high 0.1 33 µF
frequencies (100 kHz and above) is the dominant factor, so that
100 µF
ESR and impedance become almost identical, impedance being
330 µF
marginally higher. 0.01
100 1k 10k 100k 1M
Frequency f (Hz)
Impedance (Z)
ESR

1.4.4 Temperature dependence of the impedance and Temperature Dependence of the

ESR Impedance and ESR
At 100 kHz, impedance and ESR behave identically and
decrease with increasing temperature as the typical curves
show. For maximum limits at high and low temperatures, 100
please refer to graph opposite.
ESR/Impedance Z ( )
1/35
1.5 DC LEAKAGE CURRENT (DCL)
10
1.5.1 Leakage current (DCL)
The leakage current is dependent on the voltage applied, the
time, and the capacitor temperature. It is measured at +25°C
with the rated voltage applied. A protective resistance of 1000
10/35
is connected in series with the capacitor in the measuring 1
circuit.
47/35
Three minutes after application of the rated voltage the leakage
current must not exceed the maximum values indicated in the
ratings table. Reforming is unnecessary even after prolonged
periods without the application of voltage. 0.1
-55 -40 -20 0 +20 +40 +60 +80 +100 +125
Temperature T (C)
1.5.2 Temperature dependence of the leakage current
The leakage current increases with higher temperatures,
Temperature Dependence of the
typical values are shown in the graph.
Leakage Current for a Typical Component
For operation between 85°C and 125°C, the maximum working
voltage must be derated and can be found from the following
formula. 10
Leakage Current DCLT/DCL 25°C
where T is the required operating temperature. Maximum limits

are given in rating tables.
1.5.3 Voltage dependence of the leakage current 1

The leakage current drops rapidly below the value corresponding
to the rated voltage VR when reduced voltages are applied. The
effect of voltage derating on the leakage current is shown in
the graph.
This will also give a significant increase in reliability for any
application. See Section 3 (pages 278-283) for details. 0.1
-55 -40 -20 0 20 40 60 80 100 125
1.5.4 Ripple current Temperature °C
The maximum ripple current allowance can be calculated from Effect of Voltage Derating on Leakage Current
the power dissipation limits for a given temperature rise above
ambient. Please refer to Section 2 (page 284) for details.
1
Leakage Current Ratio DCL/DCL @ VR
E
NG
RA
L
CA
PI
TY
0.1
0.01
0 20 40 60 80 100
% of Rated Voltage (VR)
062819 online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 269
SECTION 2: A.C. OPERATION — RIPPLE VOLTAGE AND RIPPLE CURRENT

2.1 RIPPLE RATINGS (AC)
In an AC application heat is generated within the capacitor by than 10°C up to 85°C and less than 2°C between 85°C and 125°C.
both the AC component of the signal (which will depend upon Derating factors for temperatures above 25°C are also shown
signal form, amplitude and frequency), and by the DC leakage. For below. The maximum permissible proven dissipation should be
practical purposes the second factor is insignificant. The actual multiplied by the appropriate derating factor.
power dissipated in the capacitor is calculated using the formula: For certain applications, e.g., power supply filtering, it may be
desirable to obtain a screened level of ESR to enable higher ripple
currents to be handled. Please contact our applications desk for
I = rms ripple current, amperes information.
R = equivalent series resistance, ohms
E = rms ripple voltage, volts
P = power dissipated, watts
Z = impedance, ohms, at frequency under consideration
Using this formula it is possible to calculate the maximum AC ripple

current and voltage permissible for a particular application. 2.4 POWER DISSIPATION RATINGS
(IN FREE AIR)
2.2 MAXIMUM AC RIPPLE VOLTAGE
(EMAX)
TAP/TEP – Resin Dipped Radial
From the previous equation:
Case Max. power Temperature
size dissipation (W) derating factors
A 0.045 Temp. °C Factor
where Pmax is the maximum permissible ripple voltage as listed for B 0.05 +25 1.0
the product under consideration (see table). C 0.055 +85 0.4
D 0.06 +125 0.09
However, care must be taken to ensure that: E 0.065
1. The DC working voltage of the capacitor must not be F 0.075
exceeded by the sum of the positive peak of the applied AC G 0.08
voltage and the DC bias voltage. H 0.085
J 0.09
2. The sum of the applied DC bias voltage and the negative K 0.1
peak of the AC voltage must not allow a voltage reversal in L 0.11
excess of that defined in the sector, ‘Reverse Voltage’. M/N 0.12
P 0.13
2.3 MAXIMUM PERMISSIBLE POWER DISSIPATION R 0.14
(WATTS) @ 25°C
The maximum power dissipation at 25°C has been calculated for
the various series and are shown in Section 2.4, together with
temperature derating factors up to 125°C.
For leaded components the values are calculated for parts
supported in air by their leads (free space dissipation).
The ripple ratings are set by defining the maximum temperature
rise to be allowed under worst case conditions, i.e., with resistive
losses at their maximum limit. This differential is normally 10°C at
room temperature dropping to 2°C at 125°C. In application circuit
layout, thermal management, available ventilation, and signal
waveform may significantly affect the values quoted below. It is
recommended that temperature measurements are made on
devices during operating conditions to ensure that the temperature
differ ential between the device and the ambient temperature is less
041420

SECTION 3: RELIABILITY AND CALCULATION OF FAILURE RATE

3.1 STEADY-STATE
Tantalum Dielectric has essentially no wear out mechanism and in
certain circumstances is capable of limited self healing, random
Voltage Correction Factor
failures can occur in operation. The failure rate of Tantalum 1.0000
capacitors will decrease with time and not increase as with other
electrolytic capacitors and other electronic components.
0.1000
Correction Factor
0.0100
Infant
Mortalities 0.0010
0.0001
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Applied Voltage / Rated Voltage
Figure 2. Correction factor to failure rate F for voltage

derating of a typical component (60% con. level).
Infinite Useful Life Operating temperature

If the operating temperature is below the rated temperature for
Useful life reliability can be altered by voltage the capacitor then the operating reliability will be improved as
derating, temperature or series resistance shown in Figure 3. This graph gives a correction factor FT for any
temperature of operation.
Figure 1. Tantalum reliability curve.
The useful life reliability of the Tantalum capacitor is affected Temperature Correction Factor
by three factors. The equation from which the failure rate can 100.0
be calculated is:
F = FU x FT x FR x FB
10.0
Correction Factor
where FU is a correction factor due to operating voltage/

voltage derating Tantalum
1.0
FT is a correction factor due to operating temperature
FR is a correction factor due to circuit series
resistance 0.1
FB is the basic failure rate level. For standard leaded

Tantalum product this is 1%/1000hours 0.0
20 30 40 50 60 70 80 90 100 110 120 130
Temperature (C)
Operating voltage/voltage derating
If a capacitor with a higher voltage rating than the maximum Figure 3. Correction factor to failure rate F for ambient
line voltage is used, then the operating reliability will be temperature T for typical component (60% con. level).
improved. This is known as voltage derating. The graph, Figure
2, shows the relationship between voltage derating (the ratio
between applied and rated voltage) and the failure rate. The
graph gives the correction factor FU for any operating voltage.
Circuit Impedance 3.2 DYNAMIC

All solid tantalum capacitors require current limiting As stated in Section 1.2.4 (page 282), the solid Tantalum capacitor
resistance to protect the dielectric from surges. A series has a limited ability to withstand voltage and current surges. Such
resistor is recommended for this purpose. A lower circuit current surges can cause a capacitor to fail. The expected failure
impedance may cause an increase in failure rate, especially at rate cannot be calculated by a simple formula as in the case of
temperatures higher than 20°C. An inductive low impedance steady-state reliability. The two parameters under the control of the
circuit may apply voltage surges to the capacitor and similarly circuit design engineer known to reduce the incidence of failures
a non-inductive circuit may apply current surges to the are derating and series resistance.The table below summarizes
capacitor, causing localized over-heating and failure. the results of trials carried out at KYOCERA AVX with a piece of
The recommended impedance is 1Ω per volt. Where this is not equipment which has very low series resistance and applied no
feasible, equivalent voltage derating should be used (See MIL derating. So that the capacitor was tested at its rated voltage.
HANDBOOK 217). Table I shows the correction factor, FR, for
increasing series resistance.
Table I: Circuit Impedance Results of production scale derating experiment

Correction factor to failure rate F for series resistance R on Capacitance Number of units 50% derating No derating
basic failure rate FB for a typical component (60% con. level). and Voltage tested applied applied
47μF 16V 1,547,587 0.03% 1.1%
100μF 10V 632,876 0.01% 0.5%
Circuit Resistance ohms/volt FR 22μF 25V 2,256,258 0.05% 0.3%
3.0 0.07
2.0 0.1 As can clearly be seen from the results of this experiment, the
1.0 0.2 more derating applied by the user, the less likely the probability
of a surge failure occurring.
0.8 0.3
0.6 0.4 It must be remembered that these results were derived from a
0.4 0.6 highly accelerated surge test machine, and failure rates in the
low ppm are more likely with the end customer.
0.2 0.8
0.1 1.0
Example calculation
Consider a 12 volt power line. The designer needs about
10μF of capacitance to act as a decoupling capacitor near a
video bandwidth amplifier. Thus the circuit impedance will be
limited only by the output impedance of the boards power unit
and the track resistance. Let us assume it to be about 2 Ohms
minimum, i.e., 0.167 Ohms/Volt. The operating temperature
range is -25°C to +85°C. If a 10μF 16 Volt capacitor was
designed-in, the operating failure rate would be as follows:
a) FT = 0.8 @ 85°C
b) FR = 0.7 @ 0.167 Ohms/Volt
c) FU = 0.17 @ applied voltage/rated voltage = 75%
Thus FB = 0.8 x 0.7 x 0.17 x 1 = 0.0952%/1000 Hours
If the capacitor was changed for a 20 volt capacitor, the
operating failure rate will change as shown.
FU = 0.05 @ applied voltage/rated voltage = 60%
FB = 0.8 x 0.7 x 0.05 x 1 = 0.028%/1000 Hours
041420

A commonly held misconception is that the leakage current of An added bonus of increasing the derating applied in a circuit,
a Tantalum capacitor can predict the number of failures which to improve the ability of the capacitor to withstand surge
will be seen on a surge screen. This can be disproved by the conditions, is that the steady-state reliability is improved by up
results of an experiment carried out at KYOCERA AVX on 47μF to an order. Consider the example of a 6.3 volt capacitor being
10V surface mount capacitors with different leakage currents. used on a 5 volt rail. The steadystate reliability of a Tantalum
The results are summarized in the table below. capacitor is affected by three parameters; temperature, series
resistance and voltage derating. Assuming 40°C operation
Leakage Current vs Number of Surge Failures and 0.1Ω/volt of series resistance, the scaling factors for
temperature and series resistance will both be 0.05 [see
Number tested Number failed surge Section 3.1 (page 286)]. The derating factor will be 0.15. The
Standard leakage capacitors reliability will therefore be
10,000 25
range 0.1 μA to 1μA Failure rate = FU x FT x FR x 1%/1000 hours
Over Catalog limit = 0.15 x 0.05 x 1 x 1%/1000 hours
10,000 26
5μA to 50μA = 7.5% x 10-3/hours
Classified Short Circuit If a 10 volt capacitor was used instead, the new scaling factor
10,000 25
50μA to 500μA
would be 0.017, thus the steady-state reliability would be
Again, it must be remembered that these results were derived
Failure rate = FU x FT x FR x 1%/1000 hours
from a highly accelerated surge test machine, and failure
= 0.017 x 0.05 x 1 x 1%/1000 hours
rates in the low ppm are more likely with the end customer.
= 8.5% x 10-4/ 1000 hours
So there is an order improvement in the capacitors steadystate
KYOCERA AVX recommended derating table
reliability.
Voltage Rail Working Cap Voltage
3.3 RELIABILITY TESTING
3.3 6.3
KYOCERA AVX performs extensive life testing on tantalum
5 10
capacitors.
10 20
 2,000 hour tests as part of our regular Quality Assurance
12 25
Program.
15 35
Test conditions:
≥24 Series Combinations (11)  85°C/rated voltage/circuit impedance of 3Ω max.
For further details on surge in Tantalum capacitors refer to  125°C/0.67 x rated voltage/circuit impedance of 3Ω max.
J.A. Gill’s paper “Surge in Solid Tantalum Capacitors”, available 3.4 Mode of Failure
from KYOCERA AVX offices worldwide. This is normally an increase in leakage current which ultimately
becomes a short circuit.
041420

SECTION 4: APPLICATION GUIDELINES FOR TANTALUM CAPACITORS
4.1 SOLDERING CONDITIONS AND BOARD 4.2 RECOMMENDED SOLDERING

ATTACHMENT PROFILES
The soldering temperature and time should be the minimum for a Recommended wave soldering profile for mounting of tantalum
good connection. capacitors is shown below.
A suitable combination for wavesoldering is 230°C - 250°C for 3 - 5 After soldering the assembly should preferably be allowed to cool
seconds. naturally. In the event that assisted cooling is used, the rate of
Small parametric shifts may be noted immediately after wave solder, change in temperature should not exceed that used in reflow.
components should be allowed to stabilize at room temperature
prior to electrical testing.
KYOCERA AVX leaded tantalum capacitors are designed for wave
soldering operations.
Allowable range of peak temp./time combination for wave soldering
270
260 Dangerous Range
250
Temperature 240
( o C)
230 Allowable Range
220 with Care
210 Allowable Range
with Preheat
200
0 2 4 6 8 10 12
Soldering Time (secs.)
*See appropriate product specification
SECTION 5: MECHANICAL AND THERMAL PROPERTIES, LEADED CAPACITORS
5.1 ACCELERATION 5.6 SOLDERING CONDITIONS

10 g (981 m/s) Dip soldering permissible provided solder bath temperature ≦270°C;
solder time <3 sec.; circuit board thickness ≧1.0 mm.
5.2 VIBRATION SEVERITY
10 to 2000 Hz, 0.75 mm or 98 m/s2 5.7 INSTALLATION INSTRUCTIONS
The upper temperature limit (maximum capacitor surface
5.3 SHOCK temperature) must not be exceeded even under the most unfavorable
Trapezoidal Pulse 10 g (981 m/s) for 6 ms conditions when the capacitor is installed. This must be considered
particularly when it is positioned near components which radiate
5.4 TENSILE STRENGTH OF heat strongly (e.g., valves and power transistors). Furthermore, care
CONNECTION must be taken, when bending the wires, that the bending forces do
not strain the capacitor housing.
10 N for type TAR, 5 N for type TAP/TEP.
5.8 INSTALLATION POSITION
5.5 BENDING STRENGTH
OF CONNECTIONS No restriction.
2 bends at 90°C with 50% of the tensile strength test loading. 5.9 SOLDERING INSTRUCTIONS
Fluxes containing acids must not be used.

QUESTIONS AND ANSWERS The two resistors are used to ensure that the leakage currents of the
capacitors does not affect the circuit reliability, by ensuring that all
Some commonly asked questions regarding Tantalum Capacitors:
the capacitors have half the working voltage across them.
Question: If I use several tantalum capacitors in serial/ parallel
Question: What are the advantages of tantalum over other capacitor
combinations, how can I ensure equal current and voltage sharing?
technologies?
Answer: Connecting two or more capacitors in series and parallel
Answer:
combinations allows almost any value and rating to be constructed
for use in an application. 1. Tantalums have high volumetric efficiency.
For example, a capacitance of more than 60μF is required in a 2. Electrical performance over temperature is very stable.
circuit for stable operation. The working voltage rail is 24 Volts dc 3. They have a wide operating temperature range -55 degrees C
with a superimposed ripple of 1.5 Volts at 120 Hz. to +125 degrees C.
The maximum voltage seen by the capacitor is Vdc + Vac=25.5V 4. They have better frequency characteristics than aluminum
Applying the 50% derate rule tells us that a 50V capacitor is electrolytics.
required. 5. No wear out mechanism. Because of their construction,
Connecting two 25V rated capacitors in series will give the required solid tantalum capacitors do not degrade in performance or
capacitance voltage rating, but the effective capacitance will be reliability over time.
halved, so for greater than Question: If the part is rated as a 25 volt part and you have current
surged it, why can’t I use it at 25 volts in a low impedance circuit?
Answer: The high volumetric efficiency obtained using tantalum
technology is accomplished by using an extremely thin film of
tantalum pentoxide as the dielectric. Even an application of the
33µF relatively low voltage of 25 volts will produce a large field strength
16.5µF as seen by the dielectric. As a result of this, derating has a significant
25V impact on reliability as described under the reliability section. The
50V following example uses a 22 microfarad capacitor rated at 25 volts
33µF to illustrate the point. The equation for determining the amount of
25V surface area for a capacitor is as follows:
60μF, four such series combinations are required, as shown. C = ( (E) (E°) (A) ) / d
A = ( (C) (d) ) /( (E°)(E) )
A = ( (22 x 10-6) (170 x 10-9) ) / ( (8.85 x 10-12) (27) )
A = 0.015 square meters (150 square centimeters)
33µF Where C = Capacitance in farads
66µF
25V
50V
A = Dielectric (Electrode) Surface Area (m2)
d = Dielectric thickness (Space between dielectric) (m)
E = Dielectric constant (27 for tantalum)
In order to ensure reliable operation, the capacitors should be E°= Dielectric Constant relative to a vacuum
connected as shown below to allow current sharing of the ac noise (8.855 x 10-12 Farads x m-1)
and ripple signals. This prevents any one capacitor heating more To compute the field voltage potential felt by the dielectric we use
than its neighbors and thus being the weak link in the chain. the following logic.
Dielectric formation potential = Formation Ratio x
+ Working Voltage
• •
= 4 x 25
100K
Formation Potential = 100 volts
• •• • Dielectric (Ta2O5) Thickness (d) is 1.7 x 10-9 Meters Per Volt
100K
d = 0.17 μ meters
• •• •
100K
Electric Field Strength = Working Voltage / d
= (25 / 0.17 μ meters)
= 147 Kilovolts per millimeter
= 147 Megavolts per meter
QUESTIONS AND ANSWERS Question: Are any recommendations/limitation for capacitor

No matter how pure the raw tantalum powder or the precision of selection in parallel combination of capacitors?
processing, there will always be impurity sites in the dielectric. We Answer: Higher performance series TPS, TPM, NOS, NOM, TCJ, TCN
attempt to stress these sites in the factory with overvoltage surges, are designed to provide lower ESR values and make the product
and elevated temperature burn in so that components will fail in the more robust against current surges. The design differences make
factory and not in your product. the better performance distribution of parameters, namely ESR
Unfortunately, within this large area of tantalum pentoxide, impurity is lower and tighter compared to the general purpose TAJ series.
sites will exist in all capacitors. To minimize the possibility of The surge current load in a parallel combination of capacitors is
providing enough activation energy for these impurity sites to therefore shared more evenly amongst the capacitors and thus it is
turn from an amorphous state to a crystalline state that will better suited for this application.
conduct energy, series resistance and derating is recommended. In a parallel combination is is strongly recommended to use the low
By reducing the electric field within the anode at these sites, the ESR series of Tantalum Capacitors such as TPS, TPM, NOS, NOM,
tantalum capacitor has increased reliability. Tantalums differ from TCJ and TCN. Do not combine different series of manufacturers
other electrolytics in that charge transients are carried by electronic within one parallel combination.
conduction rather than absorption of ions. Question: What level of voltage derating is needed for Tantalum
Question: What negative transients can Solid Tantalum Capacitors Capacitors?
operate under? Answer: For many years whenever people have asked a tantalum
Answer: The reverse voltage ratings are designed to cover capacitor manufacturer about what were the safe guidelines for
exceptional conditions of small level excursions into incorrect using their product, they spoke with one voice “a minimum of
polarity. The values quoted are not intended to cover continuous 50% voltage derating should be applied”. This message has since
reverse operation. The peak reverse voltage applied to the capacitor become ingrained and automatic. This article challenges this
must not exceed: statement and explains why it is not necessarily the case.
10% of rated DC working voltage to a maximum of 1 volt at The 50% rule came about when tantalum capacitors started to be
25°C. used on low impedance sources. In such applications, the available
3% of rated DC working voltage to a maximum of 0.5 volt at current is high and therefore a risk of failure is inherent. Well
85°C. established by empirical methods and covered in MIL-STD 317, was
the fact that the amount of voltage derating has a major influence
1% of category DC working voltage to a maximum of 0.1 volt on the failure rate of a tantalum capacitor (Figure 1). Indeed, from
at 125°C. rated voltage to 50% of rated voltage is an improvement in failure
Question: I have read that manufacturers recommend a series rate of more than 100.
resistance of 0.1 ohm per working volt. You suggest we use 1 ohm
per volt in a low impedance circuit. Why?
Answer: We are talking about two very different sets of circuit
conditions for those recommendations. The 0.1 ohm per volt
1
recommendation is for steady-state conditions. This level of
resistance is used as a basis for the series resistance variable in a
Correction Factor, Fu
0.1
1% / 1000 hours 60% confidence level reference. This is what steady-
state life tests are based on. The 1 ohm per volt is recommended for 0.01
dynamic conditions which include current in-rush applications such
as inputs to power supply circuits. In many power supply topologies 0.001
where the di / dt through the capacitor(s) is limited, (such as most
implementations of buck (current mode), forward converter, and 0.0001
0 0.2 0.4 0.6 0.8 1 1.2
flyback), the requirement for series resistance is decreased. A pplication voltage/rated voltage
Question: How long is the shelf life for a tantalum capacitor?
Figure 1
Answer: Solid tantalum capacitors have no limitation on shelf life. It was also proved that the same was true of dynamic, high
The dielectric is stable and no reformation is required. The only current pulse conditions1, hence the recommendation.
factors that affect future performance of the capacitors would
Now let us look more closely at the type of circuits in use. Below
be high humidity conditions and extreme storage temperatures.
is a simple circuit which will be discussed further in this text.
Solderability of solder coated surfaces may be affected by
storage in excess of 2 years. Recommended storage conditions
are: Temperature between -10ºC – +50ºC with humidity 75% Zdiode ZL
RH maximum and atmospheric pressure 860 mbar-1060 mbar.
Terminations should be checked for solderability in the event an
oxidation develops on the solder plating. +
Zbat Zcap = ESR
Vbat

Let us assume this is a 2 cell battery system, therefore FR = 1%/1000 hours x FT x FU x FR

Vbat = 3.2 Volts = 1%/1000 hours x 1 x 0.007 (from Figure 1) x 1
Also, let us assume = 0.007%/1000 hours
Zbat = 60 mΩ, Zdiode = 70 mΩ, Zcap = 120 mΩ, ZL = 70 mΩ MTBF = 105 / FR
= 14,285,238 hours
If the “50% rule” was followed, the designer should chose a 6.3V
rated capacitor. = 1,631 years
The total circuit impedance of the system is 320 mΩ. So by Ohm’s For a 6.3 volt rated capacitor on a 5 volt rated line, the failure rate is:
law the peak current would be 10 Amps. FR = 1%/1000 hours x FT X FU X FR
This exceeds the test conditions used by KYOCERA AVX to screen = 1%/1000 hours x 1 x 0.12 (from Figure 1) x 1
its product for high current pulses1, so a risk of failure exists. = 0.12 %/1000 hours
Clearly a minimum of a 10 volt rate capacitor is required in this
MTBF = 105 / FR
application.
= 833,333 hours
As a general rule of thumb, the maximum current a tantalum
capacitor can withstand (provided it has not been damaged by = 95 years
thermomechanical damage2 3 or some other external influence) The second factor to be considered is that the more derating applied
is given by the equation: to a tantalum capacitor, the lower the leakage current level (Figure
Imax = Vrated / (1 + Catalog ESR) 2). Therefore a part used at 50% of its rated voltage will have more
than 3 times better leakage levels than one used at 80%.
So for example for a 100μF 10V D case capacitor (Catalog ESR =
0.9 Ohms), this would be:
Leakage Current vs. Rated Voltage
Imax = 10 / (1 + 0.9) = 5.2 Amps 1
In some circuits, because of size restrictions, a tantalum capacitor
may be the only option available. If this is the case, KYOCERA AVX
Leakage Current Ratio I/IVR
recommends a PFET integrator be used to slow the voltage ramp

at turn on, which in effect reduces the peak current, and therefore
reduces the risk of failure4.
Now, let’s consider a continuation of the circuit with the addition Typical
0.1 Range
of an LDO or DC/DC convertor.
Zdiode ZL
DC/DC
+ +
Zbat Zcap C2
Vbat
0.01
0 20 40 60 80 100
Rated Voltage (VR) %
The risk of a high surge current being seen by the capacitor in
location C2 is very small. Therefore if we assume the voltage rail
Figure 2
is 2.8 volts and the maximum current seen by C2 is <1.5 Amps, a 4
volt capacitor could be able to be used in this application. One final point worthy of mention with the introduction of higher
This all seems like good news, but as always, there are some reflow temperatures with the introduction of lead-free solders is
downsides to using a part nearer to its rated voltage. The first is that voltage derating can help to reduce the risk of failures due to
the steady-state life, or MTBF. The MTBF of a tantalum capacitor thermomechanical damage during reflow.
is easily calculated from MIL-STD 317 or the supplier’s catalog To summarize, a tantalum capacitor is capable of being used at its
data. An example is given below: rated voltage or close to it, provided that the user obeys the rules
Assume operating temperature is 85°C and circuit impedance 0.1 outlined in this document and is prepared for the reduced steady-
Ohms/volt (FT = 1). state life performance and higher leakage current levels this would
For a 10 volt rated capacitor on a 5 volt rated line, the failure rate produce.
is:
1
Surge in Solid Tantalum Capacitors, John Gill, KYOCERA AVX Tantalum
2
IR Reflow Guidelines for Tantalum Capacitors, Steve Warden & John Gill,
KYOCERA AVX Tantalum
3
Mounting Guidelines in KYOCERA AVX Tantalum Catalog
4
Improving Reliability of Tantalum Capacitors in Low Impedance Circuits,
Dave Mattingly, KYOCERA AVX
Question: What does failure rate mean?

Answer: Failure rate is expressed as the number of parts (as a percentage) that can be expected to fail in a given time period under
specific conditions of temperature, applied voltage (ratio to rated voltage - usually 1.0) and circuit impedance.
Question: What does ppm mean?
Answer: PPM is defined as 'PARTS PER MILLION' and can be used to express how many parts within a million pieces may fail to the
specification.
Question: What is the difference between %/1000hrs and FITs?
Answer: The failure rate as the mathematic quantity can be expressed in several units of measurement - mostly in %/1000hrs or in FITs.
FITs are usually used for the high-reliability components where expression in %/1000hrs would be more difficult to read. The conversion
is as follows: e.g. 0.01%/1000hrs = 100 FIT for specified conditions ([%/1000hrs] = x 10000 [FIT]).
Question: What are the standards for reliability calculations?
Answer: The standards used in the KYOCERA AVX specification are based on the European norm EN 61709 with the added feature
of series resistance in order to better reflect real application conditions. The basic failure rate in the KYOCERA AVX test is given for
conditions - 85°C, Vrated, 0.1 Ohm/V. To calculate the actual failure rate for specific conditions you have to consider the influence of
different factors which have an impact on reliability - correction factors for temperature (FT), voltage derating (FV),(circuit) impedance
(FR) and the base failure rate (Fbase) for the series being used.
Question: Are tantalum capacitors ESD (i.e. Electrostatic Discharge) sensitive devices?
Answer: All tantalum and niobium Oxide capacitors are not ESD sensitive devices.

Software Tools
SPICAT - SPITAN
Contains typical measured data for the majority of KYOCERA AVX solid electrolytic capacitors and gives an overview of typical
performance characteristic for polymer, tantalum and niobium oxide capacitors at different frequencies and temperatures. SpiCAT -
SpiTAN does not contain the data from specification.
INPUT PARAMETERS OUTPUT PARAMETERS

• Selected PN from the list with the help of filter (technology, • Frequency characteristics of capacitance, impedance, ESR, DF for 25°C
capacitance, rated voltage, case, series, tolerance) • Temperature – shows performance according to selected operating
temperature
• Frequency settings – shows values for given frequency
• Menu graph – shows additional performance figures for ripple
characteristics (I,V), typical DCL performance within 5 min
3D MODELS
3D Models support the design process and allow imagination of the PCB board component layout in 3D environment. The majority of
KYOCERA AVX solid electrolytics case sizes are available in STEP format (Standard for the Exchange of Product Model Data).
062819

Products Listing
PASSIVES
Filters Piezo Acoustic Generators

Capacitors
Ceramic Ceramic
Multilayer Ceramic
EMI
Film
Noise Resistors
Glass
SAW Arrays
Niobium Oxide* - OxiCap®
Low Pass - Thin Film Miniature Axials
Pulse Supercapacitors
Tantalum Timing Devices
Inductors
Thin-Film Clock Oscillators
Circuit Protection
MHz Quartz Crystal
Thermistors
Integrated Passive Components Resonators
Fuses - Thin Film
PMC - Thin-Film Networks VCO
Transient Voltage Suppressors
Capacitor Arrays TCXO
Varistors - Zinc Oxide
Feedthru Arrays
Low Inductance Decoupling Arrays
Directional Couplers
Thin-Film
CONNECTORS
Automotive IDC Wire to Board
Standard, Custom Headers, Plugs, Assemblies
Board to Board Memory
SMD (0.4, 0.5, 1.0mm), BGA, Thru-Hole PCMCIA, Compact Flash, Secure Digital, MMC,
Smartcard, SODIMM
Card Edge
Military
DIN41612
H Government, DIN41612
Standard, Inverse, High Temperature
Polytect™
FFC/FPC
Soft Molding
0.3, 0.5, 1.0mm
Rack and Panel
Hand Held, Cellular
Varicon™
Battery, I/O, SIMcard, RF shield clips
2mm Hard Metric
Standard, Reduced Cross-Talk
For more information please visit

our website at
http://www.kyocera-avx.com

Available Range of Sample Kits
SAMPLE WALLETS: Number of pieces per PN: 5

Number of PN’s: 30
ORANGE BLUE
OxiCap ® TAJ Auto, TPS Auto, THJ, TRJ (Sample Kit: Automotive)
NOJ TAJ (Sample Kit: TAJ)
(Sample Kit: NOJ) TPS (Sample Kit: TPS)
NOS, NOM THJ (Sample Kit: Hi Temp THJ)
(Sample Kit: NOS, NOM) TRJ, TRM (Sample Kit: Industrial TRJ, TRM)
TPS, TPM (Sample Kit: Low ESR)
NOS, TPM, TPS, NOM (Sample Kit: Power Supply)
TPM (Sample Kit: TPM)
TAC (Sample Kit: TAC)
GREEN
Military and HI-REL
Capacitors CWR19, CWR29,
CWR15 and various COTS+
products available only
through the Sales or Marketing
channels
BLACK PALE GREY
Overview of our product series TLJ
and matrixes (Sample Kit: TLJ Low Profile)
(Kit - Series)
YELLOW
TCJ Voltage 2V-20V
SILVER (Sample Kit: TCJ)
TCJ, TAJ low, TLC, TCJ HiV Voltage 25V-125V
NOJ, TLJ, TLN, F38, F98 (Sample Kit: TCJHIV)
(Sample Kit: Mobile) J-CAP™
(Sample Kit: J-CAP)
TCQ
(Sample Kit: TCQ)
FOLLOW US:
visit us at www.kyocera-avx.com
North America Europe Asia

Tel: +1 864-967-2150 Tel: +44 1276-697000 Tel: +65 6286-7555
Central America Japan

Tel: +55 11-46881960 Tel: +81 740-321250

Tantalum Niobium

Uploaded by

Copyright:

Available Formats

Tantalum Niobium

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tantalum Niobium

Uploaded by

Copyright:

Available Formats

Polymer, Tantalum and

Niobium Oxide Capacitors

ANY USE OF PRODUCT OUTSIDE OF SPECIFICATIONS OR ANY STORAGE OR INSTALLATION

F93 Series..........................................................................................................30 TCO Series – High Temperature Automotive Polymer

Resin Molded OxiCap® Solid Niobium Oxide Chip, J-Lead

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

is directly related to the characteristics of the powder used to 150

– polymer, tantalum and niobium oxide capacitors –

Solid Electrolytic Capacitors Road Map

TPS TPS DLA TBJ

TCP DLA TCP

Standard TCJ TCB

Hermetic Package* TCH TCH TCH

* see High Reliability Tantalum Catalog  under development

– polymer, tantalum and niobium oxide capacitors –

Low ESR TPC

OxiCap® SMD Niobium Oxide Solid Electrolytic Chip Capacitors

Wet Electrolytic Tantalum Capacitors

*see High Reliability Tantalum Catalog

KYOCERA AVX SMD SOLID ELECTROLYTIC CAPACITORS SERIES AND CONSTRUCTIONS

CONDUCTIVE CONVENTIONAL NIOBIUM

– conductive – MnO 2 – MnO2

FIVE CAPACITOR CONSTRUCTION STYLES

Tantalum series Tantalum series All microchip series F95 TCH

– polymer, tantalum and niobium oxide capacitors –

STANDARD CASE DIMENSIONS: millimeters (inches)

LOGO Capacitance Value in pF

– polymer, tantalum and niobium oxide capacitors –

LOW PROFILE TANTALUMS CAPACITANCE AND RATED VOLTAGE RANGE

220 227 W/Y W/X/Y F/X/Y Y

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

TAJ series (Temperature range -55ºC to +125ºC)

– polymer, tantalum and niobium oxide capacitors –

SOLID ELECTROLYTIC CAPACITOR ROADMAP

SERIES LINE UP: CONVENTIONAL SMD MnO2

High Rel. TMJ THH

High Temp THJ THJ F97-HT3

TRJ TRM F91-AJ6 F97

TAJ TPS F93-AJ6 F98-AJ6

TAJ F91 F93

Standard TAJ TAC TPC

TLN TLC F98-AS1 F98

– polymer, tantalum and niobium oxide capacitors –

CASE DIMENSIONS: millimeters (inches)

– polymer, tantalum and niobium oxide capacitors –

Capacitance Rated voltage DC (VR to 85°C

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

– polymer, tantalum and niobium oxide capacitors –

Moisture Sensitivity Level (MSL) is defined according to J-STD-020

* see High Reliability Tantalum Catalog under development

1: ΔC/C Marked “”