General Purpose Relays

PCB Relays SCHRACK

Power PCB Relay RT2 bistable

n 2pole 8A, 2 form C (CO) contacts

n Polarizedbistable version with 1 or 2 coils
n 5kV/10mm coil-contact
n Reinforced insulation

Typical applications
Battery powered equipment or applications with “memory function”

F0219-C

VZb

Approvals Coil Data, bistable coils 1 coil 2 coils

VDE REG.-Nr. 6106, UL E214025, cCSAus 14385 Magnetic system polarized, bistable
Technical data of approved types on request Coil voltage range 3 to 24VDC
Operative range, IEC 61810 2
Contact Data Limiting voltage, % of rated coil voltage 120% 150%
Contact arrangement 2 form C (CO) Min./Max. energization duration 30ms/1min at <10% duty factor
Rated voltage 250VAC Coil insulation system according UL class F
Max. switching voltage 400VAC
Rated current 8A, UL: 10A Coil versions, bistable coil
Limiting continuous current 8A, UL: 10A Coil Rated Set Reset Coil Rated coil
Limiting making current, max. 4s, duty factor 10% 15A code voltage voltage voltage resistance power
Breaking capacity max. 2000VA VDC VDC VDC Ω±10% mW
Contact material AgNi 90/10 bistable 1 coil
Frequency of operation, with/without load 900/72000h-1 A03 3 2.1 1.7 21 429
Operate/Reset time max. 10/5ms A05 5 3.5 2.8 62 403
Bounce time max., form A/form B 4/9ms A06 6 4.2 3.3 90 400
A12 12 8.4 6.6 360 400
Contact ratings A24 24 16.8 13.2 1440 400
Type Contact Load Cycles bistable 2 coils
IEC 61810 F03 3 2.1 1.7 15 600
RT444 A (NO) 8A, 250VAC resistive, 85°C 100x103 F05 5 3.5 2.8 42 595
RT424 C (CO) 8A, 250VAC resistive, 85°C 30x103 F06 6 4.2 3.3 55 655
UL 508 F12 12 8.4 6.6 240 600
RT424 A/B (NO/NC) 10A, 250VAC, general purpose, 85°C 20x103 F24 24 16.8 13.2 886 650
RT424 A/B (NO/NC) 1/2hp, 240VAC ,85°C 1x103 All figures are given for coil without pre-energization, at ambient temperature +23°C.
RT424 A/B (NO/NC) Pilot duty, B300, R300, 85°C 6x103 Other coil voltages on request.
Bistable coils - operation
Mechanical endurance >2x106 operations Version 1 coil 2 coils
Coil terminals A1 A2 A1 A3 A2
Operate + - + -
Reset - + - +
Contact position not defined at delivery

1
04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
© 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change.
a TE Connectivity Ltd. company http://relays.te.com/definitions
 General Purpose Relays
PCB Relays SCHRACK

Power PCB Relay RT2 bistable (Continued)

Insulation Data Other Data (continued)

Initial dielectric strength Terminal type PCB-THT, plug-in1)
between open contacts 1000Vrms Weight 13g
between contact and coil 5000Vrms Resistance to soldering heat THT
between adjacent contacts 2500Vrms IEC 60068-2-20 270°C/10s
Clearance/creepage Packaging/unit tube/20 pcs., box/500 pcs.
between contact and coil ≥10/10mm 1) socket available for 1 coil version only, see Accessories
between adjacent contacts ≥ 3/4mm
Material group of insulation parts IIIa
Tracking index of relay base PTI 250V Accessories
For 1 coil version,
details see datasheet Accessories Industrial Power Relay RT
Other Data NOTE: indicated contact ratings and electrical endurance data for direct
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content wiring of relays (according IEC 61810-1); for relays mounted on sockets
refer to the Product Compliance Support Center at deratings may apply.
www.te.com/customersupport/rohssupportcenter
Ambient temperature
bistable 1 coil -10 to 85°C
bistable 2 coils -40 to 85°C PCB layout / terminal assignment
Category of environmental protection Bottom view on solder pins
IEC 61810 RTII - flux proof
Vibration/shock resistance (functional), 8 ​A, Pinning 5​mm
opening B contact 3/5g
opening closed A contact 6/15g
Shock resistance (destructive) 100g

*) With the
recommended PCB hole
Dimensions sizes a grid pattern from
2.5​mm to 2.54​mm can
be used.
S0418-CM

2 form C (CO) contacts a)

a) Indicated contact
position while or after coil
S0272-AC energization with reset
voltage. S0163-DL

b) for 2 coil version only

Product code structure Typical product code RT 4 2 4 F24

Type
RT Power PCB Relay RT2 bistable
Version
4 8A, pinning 5mm, flux proof
Contact configuration
2 2 form C (CO) contacts
Contact material
4 AgNi ​90/10
Coil
Coil code: please refer to coil versions table

Product code Version Contacts Contact material Coil version Coil Part number
RT424A05 8A, 2 form C (CO) AgNi ​90/10 Bistable 1coil 5VDC 4-1393243-4
RT424A12 pinning 5mm, contacts 12VDC 4-1393243-6
RT424F05 flux proof Bistable 2 coils 5VDC 5-1393243-2
RT424F12 12VDC 5-1393243-4
RT424F24 24VDC 5-1393243-6
This list represents the most common types and does not show all variants covered by this datasheet.
Other types on request

2
04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
© 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change.
a TE Connectivity Ltd. company http://relays.te.com/definitions