General Purpose Relays

PCB Relays Schrack

Miniature Power PCB RYII-AP

n 1 pole 8A, 1 form C (CO) or 1 form A (NO) or 1 form B (NC) contact

n Low component height 12.3mm
n 5kV/8mm coil-contact
n Reinforced insulation (protection class II)
n Pinnings: 3.2mm and 5mm
n Especially suitable for resistive and inductive loads on
form A (NO) and form B (NC) contacts
n Plastic materials according to IEC 60335-1 (domestic appliances)

Typical applications
heating control, interface technology, domestic appliances, timers,
temperature control F0142-E

VZ
Approvals Coil Data
VDE REG.-Nr. 5358, cULus E214025 Coil voltage range 5 to 60VDC
Technical data of approved types on request Operative range, IEC 61810 2

Contact Data Coil versions, DC coil

Contact arrangement 1 form C (CO) or Coil Rated Operate Release Coil Rated coil
1 form A (NO) or code voltage voltage voltage resistance power
1 form B (NC) VDC VDC VDC Ω±10% mW
Rated voltage 250VAC 005 5 3.5 0.5 112 223
Max. switching voltage 400VAC 006 6 4.2 0.6 162 222
Rated current 8A 009 9 6.3 0.9 320 253
Breaking capacity max. 2000VA 012 12 8.4 1.2 627 230
Contact material AgNi0.15, AgSnO2 024 24 16.8 2.4 2350 245
Frequency of operation, with/without load 6/1200min-1 048 48 33.6 4.8 9391 245
Operate/release time max. 9/5ms 060 60 42.0 6.0 14000 257
Bounce time max., form A/form B 6/10ms All figures are given for coil without pre-energization, at ambient temperature +23°C
Other coil voltages on request
Contact ratings
Type Contact Load Cycles
IEC61810
RY531 A (NO) 8A, 250VAC, 70°C 100x103
RY211 A (NO) 8A, 250VAC, 70°C 75x103
RY211 A (NO) 8A, 250VAC, 70°C 50x103
UL508
RY211 A/B (NO/NC) 10A, 250VAC, general purpose, 70°C 30x103
RY211 A (NO) 1/2hp, 240VAC, 85°C 30x103
RY211 A/B (NO/NC) B300, 70°C 6x103
EN60730-1
RY211 A/B (NO/NC) 6(4)A, 250VAC, 85°C 100x103
RY211 A (NO) 8(4)A, 250VAC, 75°C 100x103
Mechanical endurance, DC coil 30x106 operations

Insulation Data
Initial dielectric strength
between open contacts 1000Vrms
between contact and coil 5000Vrms
Clearance/creepage
between contact and coil ≥8/8mm
Material group of insulation parts IIIa
Tracking index of relay base PTI250
reflow-solderable version PTI175

1
11-2010, Rev. 1110 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications
www.te.com together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change.
© 2010 Tyco Electronics Ltd. http://relays.te.com/definitions
 General Purpose Relays
PCB Relays Schrack

Miniature Power PCB RYII-AP (Continued)

Other Data PCB layout / terminal assignment

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Bottom view on solder pins
refer to the Product Compliance Support Center at
www.tycoelectronics.com/customersupport/rohssupportcenter 1 form C (CO) contact, 3.2​mm
Ambient temperature -40 to +70°C
+85°C at 6A
Category of environmental protection
IEC 61810 RTII - flux proof
RTIII - wash tight
Vibration resistance (functional),
form A (NO)/form B (NC) 20/5g
Shock resistance (functional)
form A (NO)/form B (NC) 20/5g
Shock resistance (destructive) 100g S0254-AA

Terminal type PCB-THT, PCB-THR

Weight 8g
Resistance to soldering heat THT
IEC 60068-2-20 RTII : 270°C/10s
RTIII : 260°C/5s
Packaging/unit
standard version tube/20 pcs., box/500 pcs. S0254-AB

Accessories 1 form A (NO), 1 form B (NC) contact 5​mm

For details see datasheet Accessories Miniature PCB Relay RY

Dimensions Pinning 3.2​mm

S0254-AC

S0274-CA

Pinning 5​mm S0254-AE

S0254-AD

S0274-CB

S0254-AF

2
11-2010, Rev. 1110 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications
www.te.com together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change.
© 2010 Tyco Electronics Ltd. http://relays.te.com/definitions
 General Purpose Relays
PCB Relays Schrack

Miniature Power PCB RYII-AP (Continued)

Product code structure Typical product code RY 6 1 1 012

Type
RY Miniature Power PCB RYII & RYII reflow solderable
Version
2 pinning 3.2mm, flux proof 6 pinning 3.2mm, wash tight 2)
5 pinning 5mm, flux proof A pinning 5mm, wash tight 2)
Contact arrangement
1 1 form C (1 CO), pinning 3.2mm 3 1 form A (1 NO), pinning 5mm
5 1 form B (1 NC), pinning 5mm
Contact material
1 AgNi 0.15 2 AgNi 0.15 gold plated
3 AgSnO2
Coil
Coil code: please refer to coil versions table
Version
Blank Standard version
R reflow-solderable
2) not available as reflow-solderable version

Product code Version Contacts Contact material Coil Part number

RY210012 pinning 3.2mm 1 form C, AgCdO 12VDC 1833007-1
RY210024 flux proof 1 CO contact 24VDC 1833007-2
RY211012 AgNi 0.15 12VDC 2-1833007-1
RY211024 24VDC 2-1833007-2
RY610012 pinning 3.2mm AgCdO 12VDC 1833008-1
RY610024 wash tight 24VDC 1833008-2
RY611012 AgNi 0.15 12VDC 2-1833008-1
RY611024 24VDC 2-1833008-2
RY531012 pinning 5.0mm 1 form A, 12VDC 2-1833009-2
RY531024 flux proof 1 NO contact 24VDC 2-1833009-1

3
11-2010, Rev. 1110 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications
www.te.com together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change.
© 2010 Tyco Electronics Ltd. http://relays.te.com/definitions