Auxiliary Relay

Station
Automation
Type CV2
& Protection

ABB Substation Automation Products

Features Design & Principle
! Small size The indicating relay type CV2 is an instantaneous
! High degree of reliability, even when it has been hinged-armature relay with two contacts. These may
idle for a long time be either two normally open contacts , or one
! Mechanical operation indicator normally open and one normally closed. (Two
! High contact rating normally closed contacts cannot be supplied.)
! 2 or 4 contacts with double interruption The magnetic system comprises the fixed core and
! Three mounting variants the hinged-armature which actuates the contacts.
When the coil is de-energised, the armature is reset
! Wide range of voltage and low power consum-
to its original position by a spring.
ption
When the relay picks up, an indicating knob pops out.
When the relay is in its normal state, prior to pick-up
Application the knob is black, but when it picks up, there appears
The indicating relay type CV2 is intended for use in an orange ring. The indicator can be reset simply by
control and protective systems in industrial plants pressing the knob back in.
and power stations, where it is mainly used in Separate relays can be supplied without hood for
conjunction with electronic control systems, incorporation in other equipment. For pairs of relays
particularly where a visual indication of a given various modes of mounting are possible as shown
function is required. below.

Type designation of auxiliary relays:

CV2 Basic auxiliary relay

A for AC Voltage
D for DC Voltage
H with single element without protective cover
RM with single element mounted on sheet-metal base
M with double element mounted on sheet-metal base
RN with single element mounted on plug-in base
N with double element mounted on plug-in top
J with single element mounted in1/2‘S’ size, flush mounting case
2J with double element mounted in 1/2‘S’ size, flush mounting case

Available types: CV2AJ, CV2DJ CV2DRM, CV2RDN, CV2DH,

CV2A2J, CV2D2J CV2DM, CV2DN

Technical data

Rated voltage (UN) : 24,30, 48, 110,220, 250 DC

24,30,48,110,240 AC (with Rectifier) available only in
‘1/2S’ size mounting case
Operating range : + 10% to - 20% of UN
Frequency : 50 Hz +/-5%
Pick-up voltage (% UN) : < 75%
Drop-off voltage (%UN) : >15%
Pick-up time at UN (typical) : 20-35ms
Maximum power consumption : dc; 3W
ac; 2.5 VA
Insulation tests
Dielectric test : 2kV, 50Hz, 1min. as per IEC 60255-5
Impulse voltage test : 5kV, 1.2/50micro sec. 0.5J., as per IEC 60255-5
Insulation resistance : >100 M ohms at 500V dc. as per IEC 60255-5
Mechanical life : 1x 106 switching operations. as per IEC60255-6
Switching rate : Up to 1000 Operations per hour at full breaking current,
or 3600 times per hour with reduced breaking current.
Contacts
Rated voltage : 250V dc/ac
Rated current : 10 A
Max. making current : 30 A
Max. Breaking capacities
Voltage 24-60 V 110V 125 V 220V

Contacts 1 2 in 1 2 in 1 2 in 1 2 in
Series Series Series Series
DC resistive load 16A 20A 8A 15A 6A 15A 1.1A 6A
DC inductive. L/R =15ms 7.5A 10A 3A 10A 2.5A 8A 0.8A 3.5A
AC 50Hz resistive 20A - 20A - 20A - 20A -
AC 50Hz inductive 20A - 20A - 20A - 20A -
(Cosf =0.3)

Environment tests
Dry heat test : IEC 60068-2-2 +55oC and +70oC
Dry cold test : IEC 60068-2-1 -10oC and -25oC
Damp heat cyclic test : IEC 60068-2-30 12hrs+12hrs cycle at+55oC/+25oC
with RH98% for 6days
Storage test : IEC 60068-2-8 +70oC for 72hrs and -25oC for 72 hrs.

Vibrations test
Vibration response : IEC 60255-21-1 Class-1 10-150Hz; 0.5g; 3 axis
endurance test : IEC 60255-21-1 Class-1 10-150Hz; 1.0g; 3 axis

Electromagnetic compatibility requirements

High frequency disturbance test : IEC 60255-22-1 1MHz 2.5kV common mode,
and 1kV differential mode
Weight
Type ......N : 0.69 Kg. Approx.
Type ..... M : 0.68 Kg. Approx.
Type ......2J : 0.85 Kg. Approx.

Ordering details
Relay type
Auxiliary Voltage
Contacts configuration
Connection diagram and contact configuration

a b a b

1 2 1 2

3 4 3 4

2NO + 0NC 1NO + 1NC

Fig.1- Relay with one element on plug-in base, on sheet-metal base or in 1/2‘S’ case mounting.

a b c d a b c d

1 2 11 12 1 2 11 12

3 4 13 14 3 4 13 14

4NO + 0NC 2NO + 2NC

a b c d

1 2 11 12

3 4 13 14

3NO + 1NC

Fig.2- Relay with two elements on plug-in base, on sheet-metal base or in 1/2‘S’ case mounting.

a b a b

1 2 1 2

3 4 3 4

2NO + 0NC 1NO + 1NC

Fig.3- Relay for ac voltage with one element in 1/2‘S’ case mounting.

a b c d a b c d

1 2 11 12 1 2 11 12
3 4 13 14 3 4 13 14

4NO + 0NC 2NO + 2NC

a b c d

1 2 11 12

3 4 13 14

3NO + 1NC
Fig.4- Relay for ac voltage with two elements in 1/2‘S’ case mounting.
 Dimensions

Ø6 Db Aa
Ob
Aa
5 15

13
30 3

1 11 Ls Ls Ls
110

80
a c
55

158
Eo1 b d

2 12

4 14

6 16

85

Ob 102 103 55

Dw
ø6
3

a
Ls Ls Ls

b
110

11 12

1
126 - 0
+1

140±0.3

2
13 14 15 16

3
4
5
6
7
85 107
+1
188 * 92 - 0
Db Rear view

Fig. 5- Plug-in base mounting Fig.6- 1/2‘S’ case mounting.

49
Ob Db
Aa
3
c
a

d
b

Ls Ls
11
1

12

70
85
2

13
3

14
4

15
5

16
6

135 23
95 ø5
176 *

49
85 Db
3

Ls Legend
Aa : Terminals
70

Db : Mounting hole
110

E01 : Cut-out for rear wiring.

* : Space for removing hood.
Ls : Operation signal
a b 1 2 3 4 5 6 Ob : Fixing screw
Aa ø5

23
95
176 *
Fig. 7- Sheet-metal base mounting.
 Ordering Details

Refer type designation for selection and mark ( 4 ) appropriate boxes

Type : CV2DRM Qty.............. Item no.........
CV2DM Qty.............. Item no.........
CV2DH Qty.............. Item no.........

Aux Voltage : 24VDC Contacts 2N/O + 0N/C

30VDC 1N/O + 1N/C
48VDC 4N/O + 0N/C
110VDC 2N/O + 2N/C
220VDC 3N/O + 1N/C
250VDC

Type : CV2DRN Qty.............. Item no.........

CV2DN Qty.............. Item no.........

Aux Voltage : 24VDC Contacts 2N/O + 0N/C

30VDC 1N/O + 1N/C
48VDC 4N/O + 0N/C
110VDC 2N/O + 2N/C
220VDC 3N/O + 1N/C

Type : CV2DJ Qty.............. Item no.........

CV2AJ Qty.............. Item no.........
CV2D2J Qty.............. Item no.........
CV2A2J Qty.............. Item no.........

Aux Voltage : 24VDC Contacts 2N/O + 0N/C

30VDC 1N/O + 1N/C
48VDC 4N/O + 0N/C
110VDC 2N/O + 2N/C
220VDC 3N/O + 1N/C
250VDC
24VAC
30VAC
48VAC
110VAC
240VAC
 Meter & Load
Business Management
Management Consulting
& Services
Network
Management

Station
Automation
& Protection
Communications

Panorama is the standard for a comprehensive range of

integrated solutions for efficient and reliable
management of power networks. Using innovative
information technology, Panorama delivers total control
of the power process, from generation to consumption.
The Panorama standard covers six application areas,
each offering specific solutions.

1MDB08201 -YN 02 - 2002

Asea Brown Boveri Limited

Substation Automation Products
Maneja, Vadodara 390 013, India.
Tel. : 0265-2604386, 2604384, 2604387
Fax : 0265-2638922
E-mail : [email protected]