Scribd Logo
Upload

Welcome to Scribd!

  • 448 views

    MEO CLASS IV Electrical Oral Questions by MMD Kolkata (2019-2020)

    Uploaded by

    Nirjhar Ganguly
    This a list of questions asked by the surveyors on Function 5 collected from whatsapp groups of kolkata mmd between feb 2019 to feb 2020. Keywords are underlined for each topic you have to cover. All the best

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MEO CLASS IV Electrical Oral Questions by MMD Kolkata (2019-2020)

    Uploaded by

    Nirjhar Ganguly
    448 views4 pages
    This a list of questions asked by the surveyors on Function 5 collected from whatsapp groups of kolkata mmd between feb 2019 to feb 2020. Keywords are underlined for each topic you have to cover. All the best

    Original Title

    MEO CLASS IV Electrical Oral questions by MMD Kolkata (2019-2020)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This a list of questions asked by the surveyors on Function 5 collected from whatsapp groups of kolkata mmd between feb 2019 to feb 2020. Keywords are underlined for each topic you have to cover. All the best

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    448 views4 pages

    MEO CLASS IV Electrical Oral Questions by MMD Kolkata (2019-2020)

    Uploaded by

    Nirjhar Ganguly
    This a list of questions asked by the surveyors on Function 5 collected from whatsapp groups of kolkata mmd between feb 2019 to feb 2020. Keywords are underlined for each topic you have to cover. All the best

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    1. Define power factor. Power factor depends on which factor. What was on ship?

    What happens when pf is for eg.0.6?


    How to adjust power factor

    2. Types of electrical loads

    3. Alternator maintenance and electrical safeties. Cooling of alternator, How air enters alternator even if temp is high
    inside, from where it enters where it exits. Paralleking of alternator. Thermal effect on alternator windings

    4. How to parallel two Generators What happens if freq and voltage are diff and how to maintain it. Why 11o'clock

    5. Engine room crane safeties. How many limit switches and working? What kind of stopper is there. Difference
    between deck and engine room crane safeties

    6. Single phasing? Effects? Which trip? How u know single phasing and Single phase detection

    7. Charging of battery and trickle charging. What happens to a lead acid battery if it is over charged? How will you
    know a battery is fully charged? What will you do if water level decrease in battery. Voltage drop test for storage
    battery. Specifications of battery

    8. How does induction motor works.? What is slip in IM. Safeties, Faults in IM

    9. Reason motor overheating. Checks in running motor

    10. How to trace Earth Fault. While entering ECR how you will indicate Earth Fault and ways to find out 220v
    low insulation

    11. Reverse power trip n preferential trip.... when it ll work?, how to correct it ?, why motoring?Preferentialtrip.
    setting of preferential trip?it's effect on engine

    12. What are the differences between pump room cables and engine roomcables

    13. Portable electrical equipment you carry on board ? What is clampmeter ?

    14. Types of starter, and where we use them. which starter used mostly, what is star delta starter ? between dol
    and star Delta starter. Where you can find

    15. Transformer working principle. losses in transformer? When transformer not working which loss will occur? If
    load increases what happens to losses? Why transformer rate in KVA....then what is KVRfull concept of active n
    reactive
    power ....Cu losses... iron losses

    16. What r the kinds of circuit fault n explain with the diagram

    17. 3phase induction motor rotating opposite direction....wht r the possible causes.. n how to correct it

    18. Before doing any electrical work, which certificate will u take.

    19. Define Relay, difference between relay and magnetic contactor. Working of magnetic relay

    20. what is provided to safeguard propeller and its working

    21. how u will select starter for motor

    22. what is megger, what voltage it produces, ac or dc?

    23. What is the frequency of an RLC circuit, total reactance of that circuit.

    24. transducer and working example

    25. difference between overload & over current


    26. Diff between thyristor n thermistor//thyristor and transistor

    27. Relation between V and I in case of purely inductive load and when capacitor isconnected

    28. What is droop and why it is important

    29. What is generator excitation

    30. Generator working principle

    31. Difference b/w Synchronous motor n Induction motor

    32. Diodes n Zener Diodes

    33. MSB safeties

    34. Eddy current

    35. Cable what property that is used for current flow

    36. 2 gen running in parallel,what will happen if one gen exciter fails. 2 gen in parallel but load sharing is
    unequal reasons? Generator both paralleled kw same but amp not same reason?

    37. Sea water in a electrical equipment... Action.

    38. Equipment supplied through esb and what all things will you find on esb panel. ESB voltage is not showing,
    reasons?

    39. Difference between insulator and semiconductor

    40. IP number

    41. Intrinsically safe? And flammable limit. What are the safety protection?

    42. Difference between relay and Acb and operating voltage

    43. explain synchroscope

    44. In Brushless excitation how voltage is controlled and how ac comes in AVR

    45. Types of fuses. HRC fuse

    46. what is bus bar. Bus bar function and material, where it is

    47. battery room maintenance

    48. advantage and disadvantages of shaft generator

    49. Short circuit or open circuit differences. How to test

    50. Air gap. Value, tolerance, high low effect. You have taken air gap and found it is less than previous reading reason

    51. AVR working

    52. Define earth and neutral

    53. Armature reactance

    54. Emergency generator regulations

    55. motor specifications. how to check IR of a motor? DC Motor IR Testprocedure


    56. Main bus bar and emcy bus bas coupling. Can we take both main and emergency generator on load? If not why?
    What is tie breaker

    57. Maintenance of dc motor, testing. How to change speed of dc motor

    58. AC motor maintenance. how to control speed of ac motor

    59. person gets electrical shock what to do

    60. Auto synchronization

    61. electromagnetic fail safe brake working

    62. Two heaters connected in series and in parellel, which will generate moreheat?

    63. dc distribution system in ship. what are all DC loads used in ur ship

    64. what is galvanometer. Galvanometer and resistor difference. Galvanometer, Ammeter, Voltmeter constructional
    difference

    65. shore connection specification. Shore box - 2 imp thing, what all checks? What will happen if phase sequence is not
    same

    66. benefits of resistor in ckt. What is boella effect

    67. compressor electrical safeties

    68. mccb and where it is used

    69. difference between slip ring and commutator

    70. type of governor on your ME and AE. Magnetic pickup, value of gapbetween pickup and flywheel.

    71. steering gear motor electrical safety

    72. excitation and residual magnetism

    73. synchronous motor starting, principle and construction

    74. Effect of Earthing on motor

    75. Exciter and Equilizer

    76. Emergency battery charging and connection

    77. Why insulation decrease with increase in temp/

    78. How to order 3 phase IM

    79. How to check emergency lighting

    80. Dead front panel, what does it mean?

    81. Prime mover electrical safety without which it will not start

    82. What if freq on your ship is 50 Hz and you are taking a supply of 60 Hz

    83. Circuit breaker ad types. Where do we use vacuum and sf6 type?

    84. O2 analyzer and working


    85. 24 V insulation alarm, where it is indicated and where to rectify?

    86. What is synchronization? What is phase sequence, phase angle

    87. Resistance thermometer working

    88. Batteries are connected in series and parallel. What are the advantages anddisadvantages

    89. Why freq is flickering

    90. Tracking and creepage

    91. Why we use bus bar instead of supplying power directly to the load

    92. Cable sheathing

    93. Safeties in windlass


    94. Electrical safety for lifeboat davit
    95. Working of Synchronous Condenser
    96. CT & PT
    97. Difference between starter and switch & which type of protection provided in starter
    98. RMS value, form factor
    99. Purpose of choke in tubelight
    100. On which instrument Wheatstone bridge is used

    You might also like