ANIL BHAT SIR MUMBAI NOIDA

22/04/2021

external : anil bhat

internal : purna majhi

Electrical

• diffrence b/w full wave and half wave rectifier

• what is shaft earthing why it is used

• what is iccp why it is used hw it works

• what is earth fault how will you find out

• what is the diff bw squirrel cage and slip ring motors

• where do we use slip ring motors

• what is auto transformer

• why we cannot use dc transformer

• what are the things in motor name plate

• what does ip56 means (what is ingress number )

• alternator routiens

safety

• difference between water tight and weather tight doors and hw will you test them.

• dirrence between apprent slip and true slip

• what is pitch ratio,prismatic coefficient,block coefficient,sheer strake , and tomble home.

• what is semi portable extinguisher.

• what type of foam inside semiportable ext

• what type of fixed FF system for deck and er

• how does boiler uptake fire occured

• regulation and recent amendment for garbage

• what is mast riser how does it operate and wt is the hieght in ur ship and why it is at the
top

• interlocks and safety in IG system

• name any five certificate regarding cargo and cargo handling certificate tanker should carry.

• what is non confermity and major conformity.

22/04/21 Mumbai

Internal- Purna Majhi

External- Anil Bhatt

Motor and Mep

Type of ship

Engine type

Difference between me and mc

Fiva valve working

Overload limit on your engine

When does overload happen?

How many seconds before it trips?

What is TEV?

What is superheat?

Why equalising line is used?

What is back pressure valve?

What is nitriding?

Where are such metals used?

What is normalising?

What is annealing?

What is 2G, 3G and 4G welding?

Other kinds of welding

Difference between Tig welding and Mig welding

Bilge suction valve is damaged, no spares, lapping not possible, what to do?

Centrifugal pump casing is cracked, what to do?

Bilge pump not taking suction, what to do?

How to remove a broken stud, which is stuck inside?

DG Crankcase inspection, what all checks? (He wanted to hear hammer test)

Result- pass

Attempt 1: functions all

Surveyor- manjhi sir (didn't ask) and anil bhatt sir( very frndly)

Safety-

Static and dynamic stability

Why angel of contraflacture doesn't increase after that point

Code and convention

Solas marpol isps ism(with dates)(was happy with my dates )

New ammendment in annex 4,5,6 and bwm

Displacement, deadweight, lightweight, rltn between displacement and lightweight.

Solas which chapter is 11-2, 9, what comes under this in details.

Unit of deadweight.

Why static stability curve explain

Gz and gn curves

How u calculate these?

Apparent and true slip?

Which fixed fire fighting system was present onboard?

How much was expansion ratio on your ship?

GRB ammendment?

Air pollution ammendment?

Sewage ammendment?

... few more questions can't remember all.

Electrical-

Type of fuse?

Why we need capacitors? Is it present in 1phase and 3phase?

Types of transformers(all)

How will u do test of preferential trip and reverse power.

Types of starters where you had soft starters onboard?

What is earthing system why required,

How u find earth fault?

What are the indications of earth fault?

Why can't we use DC for transformers?

What is 3phase3wire and 3phase 4wire system? How do we achieve this , where u connect
this connection, why required? Why star connection why not delta? Difference between
these two.

Some questions were related to motors can't remember now.

Motor and mep-

What type of engine(Mitsubishi and Yanmar)

Ok explain me electronic governor?

Explain how will u take thrust bearing clearance (i screwed up here, got confuse )

What is foaming and priming

What is steam trap?

Why required?

What is superheated steam , why required which is better superheat steam or other?

Phosphate test explain procedure

Why foaming happens why priming happens ( detailed reasons)

Your bilge pump not taking suction and bilges are not getting empty what could be the
reasons ( all the reasons+how to test)

Filling of oil in refer, what if the refer leaks while filling this?( I said we can condense it and
then we can fill, he was satisfied)

OMD alarm came on your watch tell me detailed step by step and why doing these
steps?(remember inform bridge first and then inform CE)

Is it a autoshut down (omd alarm), means will it shutdown the engine or u hv to do manually?

Windlass safety and maintenance.

Air bottle saftey

Resonance, frequency, vibration?

Your engine is running on overload what alarm u will get? Till what time u can run the engine
in this condition?

While making the engine we do overload test why we do that?

Difference between vent of air compressor and fridge compressor?

Where do u have vibration dampers? Working and requirements?

What is superheat?

What is de-tuner?

How will you make valve seat in good condition again if the seat is (he said a specific word
can't remember) but i said we can't use valve cutter and then lap it, he said good.

Boiler water test?

Explain sewage treatment plant? Why chlorine we have to add? What type you had on your
vessel?

What is the pressure inside STP and how u maintain it?

Regulation regarding stp?

Effects of priming and foaming in boiler and how it affect other systems?

+... Few more . Gave my best but fucked up in few questions very silly mistakes.. he
said u were doing so good in starting what happened i said sir nervous hogya suddenly he
started laughing.

Lastly manjhi sir said what do u think how was it, which attempt i said first, he said ok
good . We'll give u 3&5

Got electrical and safety

Need to work on motor and mep again

Thank u all of you for your support,. Thank u amit sir , sunil sir for the guidance. Thank u
samant sir, onkar sir, bikram sir, and every faculty in HATC.

26/04/2021

Noida

subbarao

Anil batt

Solas chapter all

Chapt-12 detail

Sprinkler and hyper mist

Gz curve whole cross question

Frame from where v count

Garbage strake sheer stake

Fixed fire fighting in hold

Co2 temp and why

Steering gear safety

What is self starting failure alarm

Elec

Vdf

Auto transformer where in used

Copper lose iron lose.

Zener diode were used zener potential

Got both

26/04/2021

Function 6

Internal: Manjhi

External: Anil Bhatt

1. Boiler blowback, Boiler firing whole process, what happens inside and how you start, how
you change load

2. Meat room temp not coming. Reasons. What happens in case of moisture.

3. How to change Fuel Pump timing.

4. Liner removal and calibration. How liner is fixed, at what position.

5. AE crankcase inspection

6. Reamer and drill

7. Propeller Drop, Rudder drop and clearances

8. Types of rudder, hollow safeties and what type of coating inside and how to do coating

9. Refer leak tests

10. Halide torch and mixture inside!

COC attempt

Func 6 MEP

Int: Manjhi

Ext: Anil Bhatt

1. OWS maintenance, 0 ppm and 15 ppm test, how to check if solenoid valve partially
opening or fully opening

2. Rudder maintenance during drydock, jumping clearance and other clearances on rudder

3. Rudder type on my shop, hollow or solid, how to paint it from the inside

4. TEV malfunction, how to repair and overhaul

5. How to change V belt of AC compressor, why reefer compressor has V belt

6. What is least count in Vernier Calliper, how much was it onboard ship, how to measure it,
what's it's significance

7. How to know if Liner cracked, what indications, how will you know if it's liner cracked or
cylinder head cracked.

What is tell-tale hole, where located on engine, what's it's purpose

8. Bearing nomenclature

9. Piston cannot be used, How will you know, what checks you'll do on it

10. How to order pipe from IMPA

11. How to replace a section of pipe in a pipeline

Got COC

26/04/2021

Anil bhatt is a

And manjhi sir is too cool

Gz curve

Smoke detector in cargo hold working and

Fixed fire fighting co2 working

Instrument measuring methane content and how in cargo hold

Why filter on instrument measuring methane gas

And why collar is given

Why hru not in forward

What will happen if ph value is higher inside bilge and how to rectify it for safety purpose

What is the need of trimming of iron ore why needed and for approx how much angle

Got coc

26/04/2021

Electrical

Internal- Puran manjhi

External- anil bhat

Types of starter

Explain soft starter

How much time is taken from switching star to delta?

What will happen if it will not switch to delta

Iccp and mgps?

Shaft earthing?

How to check earth faults?

Coc

26/04/21

2nd attempt
internal - Purna Majhi

external - Anil bhutt

#Mep

fatigue failure

why we change con rod bolts (cross ques)(wants to hear fatigue failure)

NDT tests

compressor and air bottle safeties

and more i forgot

if vegroom temp. has gone down below 0'C ...reasons

capacity control of AC how it works and cross questions

#electrical

types of transformer

CT how it works

steering gear motor safeties

navigation lamps alarms

why generator star connected

3 & 4 wire system

ESB & MSB safety (interlock how it works)

emg. gen. load test during sailing ( cross ques.)

undervoltage relay working and location

zener barrier
#motor

type of engine

how cam shaft is connected

why i-section con rod

chain drive vs gear drive

advantages and disadvantages of gear drive, chain drive

and more i forgot

last decider by external only

if generator generating normal volatage but not able to take on load why??(didn't agree on
any point?)

Got motor and mep .

electrical repeat

26/04/21

2nd attempt

internal - Purna Majhi

external - Anil bhutt

Motor

• thick shell & thin shell bearings. Advantage of both Where we use thick shell bearings and
other one?
• What is special about X head bearing? What was pressure on your engine? How its different
in sulzer

• Advantage of telescopic pipe? How its done in sulzer? Advantages?

• Follow up and non follow up in steering

• Liquid coagulant in boiler

• Corrosion and types? Fretting and pitting corrosion?

• Electric Governors ? Diff in ME and AE? Electronic governor

• Axial and longitudinal vibration? How they are taken care of?

• Detuner? Where is it on ME? How it works?

Elec

• Relay vs contractor

• Why dc used for excitation of alternator

• Brushless excitation? DC excitation

• Induction motor classify

• Where we use Wound rotor?

• If power fails when hanging piston in crane what happens? If in case it happens and fails
safe happens, how will you bring the piston down

• Navigation lamp alarm?

• Battery room safeties. If blower not available how will you ventilate?

Got only Motor

05/05/2021

Ext: Anil bhat

Int: Subbarao

Safety:
All Solas chapters,

Chapter 9? Explain chapter 9 in detail××

Which fixed fire fighting system on cargo hold,

Regulation of CO2 room

Capacity of CO2 bottle, hydraulic testing duration, testing pressure.

Gunwale, ship construction many small definitions I don't remember.

Electrical:

Types of induction motor

Brushless alternator many cross questions

AVR

When single generator running no voltage generation at output reasons.

Rest questions forgot

MEP:

types of corrosion in boiler cross questions

What is pitting corrosion

What is Hydrogen corrosion

Type of boiler

Which type fwg

Reasons for High salinity alarm cross questions

How to find leakage in shell and tube type heat exchanger.

Difference between chain drive and gear drive

How to charge lube oil into refrigerator cross questions

Motor:

How cam rotates

Main engine trips

ME Reversing

Got ONLY MEP

DATE -6-04-2021

TIME -50 MIN

SUBBARAO

Safety

Mlc2006

(If you are not getting enough rest what will you do.)

Anti healing pump tank capacity

cross curv, static curve

Annex 6 new regulations

Provision to load dangerous cargo present in container ,

How to relese CO2 when fire in engine room(if your 2 nd engineer is missing )

Annex 3

Statutaroy stearing(don't know)

Shell expansion plan/Simpson rule

Seemp and eedi(difference eedi eeoi)

Motor /mep

How much should be the referigerent in system

Refrigerent charging process ,

what happen if back pressure valve is faulty

How to take wear ring clearence, material in pump

Lantern ring function and material

Safeties on starting air line

Air gaurd seal(why given)

K,L,M clearence in T/C(what if not correct)

Oil in boiler what to do , types of trap working

If specific gravity of fuel increase, what should be the gravity disc size.

How to remove generator valve seat

How to take performance of A/E , why not powe card

How piolet valve work(purifier )

What are catfines

What is FQS how to change ,CCI,Vit, super vit

How rack works

Exhaust of one unit is high

Electrical

HRC fuse
Earth fault (440)

Preferential trip

Synchroscop working and xx(resistance, inductor)

Battery room cheak., (Why hydrometer you can check voltage by voltmeter also)

Safety on high voltage system

CT/PT(name the instruments also)

Thyristor,SOft starter and VFD difference

Result - fn 3 repet, rest all given

Thank you saheem Khan for posting question regularly,keep up the good work.

Anil Bhatt may 5th

Which ship? Bulk

What is Hopper tank ( don't know)

What is apparent slip and real slip

What is pitch ratio

What is garbod strake

What kind of cargo

What is static stability

What is dynamic stability

What is gz how is it calculated

X axis pe kya y pe kya?

What is righting lever?

Types of detector
How smoke and heat work

How hypermist works

Ammendment in annexure 6 started confusing with 5&4.

Which engine's

Rtflex and me difference

Alpha lubrication

How is it done?

Turbo type

Which is good

What is VTG

Why constant pressure.

Material of the nozzle

How the fins arrangement.

What is earth fault

What is neutral

What earthing iso neutral

How is earth fault detected

Type of motor.

What is power factor

Many more.
What is iccp many XQ

ac or dc?

SHAFT EARTHIN? Why

Refrigerant unloader valve

How does it detect

Location how capacity control.

Oxyacetylene safeties

Cast iron Welding

Disadvantage of cast iron

Percentage of carbon in cast iron.

Fitter comes and say order this bolt how?

How to calculate the pitch.

Many more

At end asked internal asked what scavenge inspection is done. Then gave function 4

05/05/2021

What type of ship you sail

1.explain Class

3.Aperent slip

4.Real slip
5.Bilge suction vlv regulation

6.Difference between Wheather tight door Water tight door how to operate from remote

7.Sea line safety

Type of steering gear

05/05/2021

Ext: Anil bhat

Int: Subbarao

Safety:

All Solas chapters,

Chapter 9? Explain chapter 9 in detail××

Which fixed fire fighting system on cargo hold,

Regulation of CO2 room

Capacity of CO2 bottle, hydraulic testing duration, testing pressure.

Gunwale, ship construction many small definitions I don't remember.

Electrical:

Types of induction motor

Brushless alternator many cross questions

AVR

When single generator running no voltage generation at output reasons.

Rest questions forgot

MEP:
types of corrosion in boiler cross questions

What is pitting corrosion

What is Hydrogen corrosion

Type of boiler

Which type fwg

Reasons for High salinity alarm cross questions

How to find leakage in shell and tube type heat exchanger.

Difference between chain drive and gear drive

How to charge lube oil into refrigerator cross questions

Motor:

How cam rotates

Main engine trips

ME Reversing

Got ONLY MEP

1st at

Int : meena sir

Exp : anil sir

Safety

Type of ship
Experience?

Company name

1.Shell ex plan

2.Action on sca fir how will you Extinguished

3.intact stability ( i confused )

Some more question

Mic had some problem so he was irritated

Elec

What is air gap

. Aux gove working.

Mic problem so shote on me.

So, elec cancel directly fail.

Mep and motor

* How many ship u sailed

# tappet clearance

* How u will check air in refrigeration system

How u will remove

# aux engine

How gov works

How will u take out Maine bearing

Diff between inlet and ex valave.

Water ingress in sump - how did you come to know

(He want to know how u check and L.o test)

#comp

If busting disc bust what will be your actions as duty Engineer.

Me

Sca inspection

In case of CC explosion what is safety provide for that ( i said cc relief door)

#If sca fire causes

#If it will happen is that chance to crank case explosion ( i said yes)

What will you check during o/h of reciprocate pump

Internal gaan bhi maar raha tha orr mazee lee ke bola

Safety repeat kartaa huu tooo electrical bhi repeat kar detaa huu....

# Thank you for support guysss...

Keep sharing your knowledge in group

28/06/2021

Mumbai

Ext: Anil bhat

Int: Subbarao

20 Mins

MEP :
What is pitting corrosion

Which type fwg on ship n hw to check salinity ( 0 ppm n 15 ppm)

Went questioning deep into welding defects

Asking about some lubrication used in centrifugal pump...

RAC safeties

Type of pump used in Bilge system n why

Motor:

Main engine trips.

Liner crack how to know.

Use of Indicator Cocks n then how many diagrams u will get n use of it.. ( inshrt indicator
diagrams )

Fuel Injector types

Turbocharger types n wht type used on ME n AE

Got Motor

Repeat MEP

Anil bhatt bhai maast banda h✌🏻

Bt questions MEP mein thoda tricky n tough pucha..

18/06/2021

Mumbai

Internal : Subbarao

External : Anil Bhatt

Boiler misfire reason ?

Type of boiler feedwater pump.

Centrifugal pump ... Can it be started with discharge v/v shut & reason for low discharge rate
.

Functions of accumulator in hydraulic line .

Main bearing clearance .Methods & name of feeler gauge used to measure main bearing
clearance .

Fuel leak off alarm & testing.

How to relief excessive combustion pressure .

Reason for having space heaters in refer compressors( pour point & moisture/refrigerant
wala reason bola , god knows usko kya chahiye tha)

Intake & exhaust valve how will you distinguish .

AE cyl. head pressure testing.

ME & AE lubrication .

Got 4b repeat 6

Saheem khan:

28/06/201

Subbarao

Anil bhatt

MOTOR

*What type of ship

* which type LNG tank u had

*Chain elongation explain

*Fuel leak off alarm

*TC and KE changed to pressure energy

*Main sump is mixed with water How you get to know

*Lub oil tests

*TBN values

*Lub oil property

MEP

*Why scale formation in FWG

*Explain about gear pump how it works

*what is NPSH

*why heater in crankcase of refer

*why we have flywheel

*which one big in 4S 2S

Got both

02/07/2021

Mumbai

Meena sir

anil bhat sir

Motor
Thin and thick metal bearing

nomenclature of bearing

aux eng. nomenclature

Pinton skirt and crown material

why crown is separate

Material crown and piston

Hot cold corrosion

Cpr piston ring

Decider

Follow up Non follow up

Pass

02/07/2021

Mumbai

Internal : Meena

External : Anil bhat

Motor, 4b

1)Difference between RTFLEX and ME.

2) common rail

3)FIVA valve

4)ELFI valve

5)how cam shaft in rotated

6) Difference between ME and MC engine

7) types of ME engine

8) difference between ME-C and ME-B

9)alpha lubricator

10) difference between chain drive and gear drive (advantages and disadvantages)

11)cross head lubrication in Sulzer and MAN

12) Types of turbocharger

13) why constant type

14)what is VTA/VTG and working of it.

Result: COC

Anil bhatt sir ext.

Gauri lal meena sir int.

Safety func.3-

Type of ship

E/r crane safeties

Scavenge fire/inspection

Co2 ffs & Hypermist

Margine plate,margine line

Bulwark

Freeboard

Coffin plate

Gz curve

How to find gm in gz
angle of contraflacture

What happend in end of gz curve

Which ship is using normally tinder or stiff

Water tight and weather tight door

Collision b/h

Shell expansion plan in brief, I numbering starting from fwd or aft in SEP.

Garboard strake and uses

Block coefficient

Metacentric height

Angle of loll

2-3 more but i forgot

Electrical func. 5-

What is diode & cross que (zener,and types too)

Generator measures in, connection used in genny(star or delta)

Transformer measures in,

transf. Type in your ship,ac supply given of dc

Iron loss(eddy and hyteresis both)

Ac motor ip rating and how much it has in your ship

3phase 3 wire and 3 phase 4 wire difference

Squirral cage and slip ring motor difference

Brushless alternator

Pizo electric effect

Protection of e/r crane

3 lamp

Difference between auto transformer and soft starter

Star delta starter why star is using in starting,why time delay unit,if fails what you do?

Reverse power trip

2-3 que he asked which is having term going from my head top

Cleared safety

Electrical remain

दं डवत प्रणाम

Sunil (SP)sir Raj sir @onkarHATC sir @gourav sir Ashish sir hatc and to all faculty and family
of hatc

Thank you guys for responsing properly.

5/jul/2021

Mumbai

Anil bhat, meena

1- types of turbocharging

2- CPR

3- In linear we have One Ring and purpose of it

4- M/E crankcase inspection

5- Boiler feed pump type, what will happen if we put pump in parallel & series

6-Refrigeration compressor short cycling

7-what us nitriding, Hardening, Normalizing

8- Starting of boiler if Auto system is fail

9- If bilge valve is worn out and u cannot do the lapping, what will you do.

10-Accumulation of pressure in boiler why 15min for fire tube boiler

11-Air cooler chocked how you will get ti know

12- difference between lube oil properties of Cyclinder oil n crankcase oil.

Motor pass,

MEP repeat.

05 july 2021

mumbai

Meena

anil bhat

Motor:

Overloading of engine.

Ionization smoke detector.

Fuel leak off alarm.

Why leak off alarm

Exhaust spring is there not how can run the engine??

Why safety air??

Cyl lube oil and GE lo difference.

Aur bhi the yaad nai

Exhaust valve spring air ***

Mumbai

05 july

Anil bhat..
Meena

1.steam trap

2.water hammering

3.Bearing 6215 meaning

4. How to order bolt

5. How to order cutting wheel

6. How to remove broken stud

7. How to renew exhaust guide

Mumbai

5/7/21

Meena

Anil bhatt

Motor mep

4 stroke piston lubrication (i explained him all but he was not satisfied)

1 unit peak pr low reasons and what to do

How to adjust fuel pump timing in 4 stroke.. ( he wanted exact procedure for adjusting timing
bolt)

In case of cpp control failure what to do (local control to be used)

Thrust bearing removal procedure

Difference in suction and discharge valve of main air compressor

Unloader function

Refer system what alarms and how to test those alarms

Refer lo properties

How main engine connected to propeller shaft. (reduction gear)

What is reduction ratio?

Camshaft and crankshaft speed ratio in 4 stroke.. Why is it so

Crankshaft deflection why taken.. He wanted more reasons

What is fatigue failure

Thin shell and thick shell advantage and disadvantage of both.. Materials used

Starting air valve

Rest forgot.. He asked too many questions

Electrical

Alternator winding star or delta.. Why so

Slip ring induction motor.. Construction.. Why and where used

Squirrel cage motor

3 ph 3 wire and 3 ph 4 wire system

Insulation resistance test

Rest forg

Mumbai MMD

Int: Gauri Lal Meena

Ext: Anil Bhatt

5th July 2021

2nd Attempt

Safety:
Type of Ship

How LPG Carrier is different from Crude Oil Tanker?

Explain Independent Tank

Structure of Type A (Layers), B, C and Membrane Tank.

Which Hazardouse category your ship?

Explain Difference betn 1G and 2G.

Explain seal in shafting of cargo pump.. (I had fully submerged p/p)

Explain meaning of fully submerged pump.

Safeties against cargo leakage in Compressor Room.

Firefighting arrangement system on Deck.

DCP

Water Spray System.

Person falling overboard. Actions

Person falling unconscious. Actions

Solid Floors

MEOL:

Type of Engine. ME and AE. Nomenclature.

Lube oil test onboard

Different Indicator Cards

Derive power without using cards.

Turbo Surging

Turbo Matching

How do you vary FO Quantify in Aux Engine?

Unloading Mechanism in Refer System

Electrical:

ER Crane Safeties

Load hanging over crane, how will you lower the load when power cutoff?

Single Phasing

How single phasing prevented?

Single Phasing Protection Relay

Motor Protection Device

Explain VFD

Explain Rectifier Setup

Where VFD used on Ship?

Bow Thruster Starter Methods

Control of speed of AC and DC Motors

Why exactly DC used in excitation.

Permanent Magnets in Rotor

Got all three.

Done with CoC.

Best of luck everyone.

MMD Mumbai

05th July 2021

Meena and Anil Bhatt

Fn3 - Safety

1. Watertight and weather tight door. Regulation.

2. Pitch ratio

3. Apparent slip and true slip

4. Block coefficient

5. prismatic coefficient

6. Solid floor

7. Bracket floor

8. ODS

9. Nox technical file what all to be recorded.

10. How to make sure u r nox compliant?

11. Annex 1

12. Why 15 ppm?

14. Explain OWS regulation in detsil

15.weekly ORB entries.

16. Lifeboats and rescue boat regulations.

17. Lifeboat specs for gas carrier.

18. Type of Ship sailed? Specs?cargo carried ?

19. Tank structure and how is it different from others?

20. Tank material and speciality about this material?

21. Types of rudder and what's on ur ship? Speciality about semi balanced rudder?

22.Struture of Rudder? Why hollow?

23. How the inside of rudder is painted?

24. IGC code n IGF code.?

25. Differece btween code n convention?

26. Statutory and mandatory certificate?

27. Free surface effect? Effect on G & M.

28. Smoke Detector? Regulation and working.

29. Enclosed space entry procedure and why time limit on thr permits?

30. PFE yearly maintenance. For CO2 and FoAm.

Many more can't remember

Fn 4b - Motor

1. Main engine and aux engine specs and nomenclature.

2. Bearing nomenclature

3. Piston cooling flow diagram

4. Chain drive and gear drive, advantage and disadvantage.

5. How torsional and axial vibrations are damped in main engine?

6. Thrust bearing working? Why insidr engine?

8. Pistion cooling alarm! How will u chek truness of alarm? Action to be taken?

9. Air compressor unlaoder? 2 main reasons?

10. Refer compressor LO properties. ?

11. Lube oil test onboard? All tests

12. Why viscosity is impt? How it was maintained onboard?

13. BOILER mountains all. .

14. Line up centrifugal pumps for max discharge and Max pressure.

15 how to tackle short cycling of pumps in parallel mode?

16.Main engine overload? What resons and actions?

17. Safematic steering system . Entire process.

More questions ..can't remember

Fn 5- EECOL

1. MSB safeties

2. Maintenance on ACB

3. Different types of circuit braker , explain constructional details

4. Diffrce btween realy and ckt.

5. Shore connection box indications.

6. In drydock , If PSI not working how will u know phase angle js same?

8.Starter Routines ? How to clean contacts?

9. Alternator air gap? Why is maintained?

10.Steering gear alarms n trips.

Many more.

Total time 1hr 50 mins

Result: Cleared all 3 : COC

Goodluck guys..

Mumbai MMD

Date- 07/07/2021

Internal- Subbarao

External- Anil Bhat

First attempt

Function 3 - COSCOPOOL

Fixed fire fighting system onboard (Co2)

Type of ship ( container)

Fire fighting system in cargo hold everything

Shell exapnsion plan

Fixed Co2 system 5 yearly check and 10yearly check

Water tight and weather tight doors and how to do pressure test and operated from
where

Solid floors

Bracket floors

Permeability

SCBA how to fill bottel

EEBD

1 more I didn't remember

Function 5 - EECEOL

Specifications of generator

Generator is not starting

Where to connect DC suppy for residual magnestism

Transformer losses

High voltage system

Breaker used in high voltage system and why vcb

Generator is star connection or delta

difference between neutral and ground

Star delta starter

Auto transformer and where used on ship

Decider question by Subbarao - Want to parallel the incoming generator all parameters
are same but still the breaker is not closing why

Overspeed of generator what to do

Got Function 3

Repeat Function 5

Thank you all my friends for helping me means a lot

07/07/2021

Mumbai

Ext.: Anil Bhatt

Int.: Subbarao

Safety

1) which ship did u sail?

2) Gt, Nt dwt, Light weight?

3) types of rudder( which rudder on ur ship)?

4) difference between sprinkler and hypermist?

5) testing of hypermist and sprinkler?

6) what is convention and code?

7) Name some convention and code?

8) What is fse?

9) life boat releasing method?

10) Launching of free fall?

Motor

1)Which engine??

2)Mc and ME difference??

3)Hot and cold corosion?

4)Piston cooling methods?

5)Which on ur ship??

6) advantages of oil??

7) disadvantages of water type cooling??

8) why water cooling is better than oil??

9) what is cloverleafing?

10) boiler safety?

11) gauge glass safety?

12) why no ball is present on steam side??

Electrical
1) what is VFD??

2) working of VFD??

3) If 2 gen. Are paralleled but share different load reason??

4) synchronising methods?

5) how to synchronise with voltmeter?

6) shore connection box items??

7) what all checks are carried out while connecting shore connection??

8) how is shore connection connected to ship??

9) how to check phase sequence is if phase sequence tester is spoilt

10) types of fuse??

11) types of transformer??

12) what is pt? Working

Mep

1) maintenance of rudder??

2) how to pressure test the rudder??

3) do u know shell n tube type heart exchanger?? How to find leak in it??

Today had orals all 4 cleared 3 thank you for ur support.... And help providing info..... In
the grp...

09/07/2021

Mumbai

Funct5

Anil bhatt sir

Meena sir

Types of transformer

types of starters

Ac transformer and Dc transformer

what is dead front panel

Checks in battery room

preferential trip

Reverse power trip

what is dastpot and where it is used

got it

09/07/2021

Mep

Anil bhatt

GL Meena

1.what overhaul you did

Purifier - What checks, type of bearing, nomenclature of bearing, how many bearings

2.Water in gear case of purifier. Fault finding and measures

3. Globe valve and gate valve overhaul

4. What is valve seat cutter

5. If seat damaged of globe valve what you do

6. Bulkhead crack repair

7. Omd alarm. Indication , action

8. Centrifugal pump overhaul procedure and checks

9. Name boiler water test

10. Phosphate taste. why

Pass . COC

09/07/2021

NOIDA

Meena

Anil bhatt

MEP

Charging of oil in reefer compressor

Thrust block clearance

Nitriding, annealing,hardening

Bearing nomenclature what is 6205 bearing

Types of movements of ship on sea

Safety

Type of ship( mine was reefer)

Fire in container how u will know

Fixed fire fighting system for container on deck

Flooding in engine room

Emergency generator regulations

Discharge of bilges criteria

Got mep

Safety repeat

Mumbai

9/07/2021

Ext- Anil bhat

Int- Gauri Lal Meena

Motor, Mep

Show your room

1. Indicator diagrams, how to take and significance.

2. How to calculate power card, formula.

3. Lube oil properties.

4. Difference between ME and AE LO property

5. How to change ME exhaust guide.

6. How to take liner calibration.

7. What is major axis and minor axis.

8. How will you get to know that your internal micrometer is placed properly inside the
liner n giving you correct reading.

9. How will you fabricate a pipe with holes in it and changing diameter. It should be
exact same.

10. Peak pressure of unit 5 is not maximum. Reasons?

11. Type of compressor.

12. If relief v/v lifting of 1st stage and 2nd stage. Reasons?
13. Safety of compressor. How to check.

14. Refrigerant compressor LO property.

15. If tev is malfunctioning and no spare is there and there is this long voyage, what will
you do.

16. Safeties on refrigeration system and how to check.

Got mep

ACCEPTED ANSWERS OF ABOVE QUESTIONS

4. TBN

8. I said I will move the inner micrometer in the liner and where it will show this largest
diameter it will be the correct value.

At this he nodded n external said yes say this na

9. I said I will make this template with the wire but he said I want exactly the same one.

After this I said don't know sir then.

13. Lo low pressure, high discharge temperature of air

To check pressure setting lowered and temperature sensor dip in hot water

15. No idea

16. All the trips, for LP close compressor suction v/v and HP close condenser inlet v/v.

functon 3

09/07/2021

anil bhat meena

type of ship sailed

1.water tight door regulation

2 scaba testing pressure

working pressure

how will u charge onboard

3 eebd time for evacuation

4 prismetic coefficients

5 real and apperent slip

6 special area regulation for bilge

7 engime room flooded what ur acton

8 free surface effect how u will reduce

9 block cofficient

02/08/2021

MUMBAI

MEENA SIR

ANIL BHAT SIR

SAFETY

Iopp

Sopep

Loadline cetificate

International tonnage certificate

Fire fighting booklet

Cargo ship safety certificate

Cargo ship saftey equipment certifictae

Doc

Smc
02/08/2021

MUMBAI

INT- MEENA SIR

EXT- ANIL BHATT SIR

SAFETY

1. Which type of ship you sailed on?

2. Type of engine DFDE or not

3. IGC code and IGF code

4. Tell me about IGC code

5. Margin line and its importance and plimsol line relation

6. ISM code and ISPS code in detail

7. Buttock Line, Gunwale, Solid Floor and many more terms

8. Type of fixed fire fighting system on machinery space and details

9. PFE which are banned onboard

10. Checks and maintenance on foam PFE

11. What is semiportable type extinguisher

12. Hypermist system in detail and how to test it

13. How do detectors work

ELECTRICAL

1. Difference between commutators and slip rings and uses

2. Why split rings used in DC

3. Types of motor

4. Difference between Squirrel Cage motor and Wound rotor

5. Where are the motors used

6. Brushless excitation explain

7. How is AC converted into DC

8. Types of rectifier and difference between them

And a few more

Meena Sir Decider question

1. What will you do if you find engine room flooding in your watch

2. What are the actions In case you see a person fall overboard.

02/08/2021

Internal: GL Meena

External: Anil Bhatt

Function 4 Motor

Type of ship

Type of engine

How piston is cooled on your ship?

Whiy oil? Advantages of oil and water cooled?

Different types of corrosion? Caustic embrittlement?

What is hot corrosion and cold corrosion?

Type of purifier? How alcap functioning?

What is pairing disc?

What is turbo charger surging? Why it happens?

What is lybernith seal? Material?

What type of turbocharger u have?

What is K clearance? Waht is value?

How turbine blades are mounted on rotor? Lacing wire?

What is MEP what is MIP? how it is found?

What are different cards? Explain light spring card, draw card?

How faulty fuel rack is shown in draw card?

How u will find late injection from draw card?

Function 6 MEP

what type of bige valve you had?

If seat is badly damage how will you repair it?

What is 1g, 2g, 3g and 4g welding?

Waht is tig welding? What is mig welding?

What is difference between drill and reamer?

Wher you use reamer and wher you use drill?

If you Stern tube is leaking what action u will take?

What are different rudder clearances?

What type of steering?

How you mearure rudder drop in rotary vane type steering gear?

Got Motor

Mep repeat

02/08/2021

Internal: GL meena

External: Anil Bhatt

Duration: >1 hr

Function 4 and 6

Type of Ship

Type of engine
Type of governor. Which type of governor in ME and AE. Working of both. How it mantains
constant speed?( I had no idea)

Why no droop in ME? (Not accepting anything)

Thrust block and Lots of cross question

Axial and radial vibration and lots of cross question

Starting interlocks. He Wants working of interlocks

Detuners. Purpose, working. Where is it fitted exactly?

Overloading of engine. Wants exact working of an overload trip

Overspeeding of engine. Working of overspeed trip

Windlass brake testing(iski g me ghus gaya). How does the testing equipment look like? How
it functions?

A pipe having 10 bends with varying diameter has hole. How to fabricate same pipe?

Leekage in shell and tube type heat exchanger and lots of cross question.

Many more questions. I'll post when I'll remember

Engine type

Advantages of chain drive and gear drive

Pr testing of piston,cylinder head

Air start valve leaking how to know,what to do during manuvering

Automatic start valve

Material of bed plate and how it is constructed,tie rods,chokes material

Mep

STP maintenance,pr. And type of compressor in STP

How to order bolt,grinding wheel(mention rpm)

How is radiography NDT done

How is magnetic particle NDT done

Leaking shell tube type HE how to identify

02/08/2021

Internal: GL Meena sir

External : Anil Bhatt sir

Safety

Enclosed space

Gunwale, Bulwark, solid floors, Girders

STP New ammendment

Bulbous bow advantages disadvantages

Motor&MEP

Safeties in air starting system

Vane type steering gear system & its rudder drop calculation

Refrigeration unloader working

Veg room temp becoming negative,reasons?

Boiler Accumulation test? Why to do?

Purifier seal ring damaging continuesly even after replacing with new, Reasons?

Fire fighting systems onboard? Weekly, monthly, yearly maintenance portable fire
extinguisher?

CO2 portable extinguisher maintenance, checks?

Max n Min weight of portable fire extinguisher?

Checks when ship gets grounded?

Electrical :

Single phasing of motor?

When single phase in ckt why 3 phase motor cannot start?

Earth fault

Alarms & trips in Fridge

How single phase motor starts? Capacitor role?

How to revive motor immersed in water?

Anil bhatt

Subbarao

5/8/21

Safety :

1) What is a convention and what is a code. Difference between both.

2) prismatic coefficient

3) block coefficient

4) which ship sailed. I told vlcc. Asked firefighting systems onboard. Then asked about
hypermist system. How it works. Sensors for getting system activated. How to test sensors

marpol annex 5 and latest amendment

Rest forgot

Electrical:

1)What are the safeties on a generator

2)What is high voltage

3)advantages of high voltage system

4)what is single phasing

5)why single phase motor is not self starting

6)what is copper loss

7)what is iron loss

Rest forgot

2 din padh ke electrical nikal gayi. Safety toh start bhi nhi kr paya tha. Thanks saheem bro.
Aapke questions se bhott help hoti h

05/08/2021

SUBBARO

ANIL BHAT

SAFETY

*Gunwale

*Garboard strake

*Weathertight /watertight (Upto which head it doesn't allow water to pass

Bro usne mere se poocha watertight door mei kis head tak water ko pass nahi hone deta) i
don't know

*Solid floor

*CO2 bottle pr.

*Permeability

*Static and dynamic stability

*Types of Extinguisher

*which are banned

*Which checks done weekly, monthly, quarterly

*Checks done on cap of extinguisher

ELECTRICAL

*Types of Transformer

*Safeties on crane E/R

*If piston hanging can we lower the piston after power cut out.

*Zener Diode
*half wave , full wave rectifier

*Types of induction motor

*Advantage of slip ring Motor

*Diff. B/W Relay and contactor

Got electrical

06/08/2021

Meena

Anil bhatt

Safety

-fixed fire fighting system in cargo hold

-regulations for same

- how you make sure 85percent is released in first 2min

- apparent and real slip

- BWM

- isolating valve and when used

- new ammendments in annex 4,5

Which detector in cargo space

Working of smoke type

Types and working of smoke type

Type and working of heat type dectors

06/08/2021

Meena sir

Anil bhat

Safety
Light weight dead weight net weight

Inclinating exp

Hyper mist

Sprinkler

Collision bulkhead

Heel

Dynamic aur static test for lifeboat

06/07/2021

Internal: Meena sir

Ext: Anil Bhatt

Safety:

Definations: deadwt, lightwt, gross tonnage, net tonnage, displacement

Co2 room safeties

Coz room height

Fixed fire fighting system

Heat sensor regulations and types

Navigation light alarms

Navigation light which side is red green

Lifeboat static dynamic load test

Coffin plate

Difference between girder and frames

Types of floors

Electrical:

No voltage output from generator

Voltage there but generator not coming on load

What is ACB how it doesnt let connect when load mismatch

Earth and insulated neutral system

Types of transformer

Working of snycroscope

Working of dc transformer why it doesnt exist

Working on auto transformer

How is Emergency generator disconnected when power in MSB is restored

How to give residual charge to Generator if charge is absent

Relay vs contactor difference

06/07/2021

Internal- meena Sir

Ext- anil bhatt(Banda ultimate h bas ghumaoo mat)

Safety

1- lots of definitions from ship construction (basics)

2- fixed fire fighting system regulation (foam type regulation)

3- how many relief hole on fire extinguishers.

4- d1 or d2 which bwms was on ur ship? How u exchange ballast.

5- what is dynamic stability.

6- how to find gz

7- working of smoke detectors.and regulations alsooo

8- which detector in cargo space

9- marpol amendment10

10- water tight door testing

07/08/2021

Meena sir

Anil bhatt sir

Safety

Type of ship

What cargo it loaded

Cargo hold fire safety and which detector is used in cargo hold

Isolation valve in fire line

Location of isolation valve in ur ship.

Gz curve

Angle of heel

Dynamic and static stability

What changes when ship will go from fw to sea water

Margin plate

And some more I forget

Passed

Date-7/8/21

Noida

Internal- Meena

External- Anil bhatt

MOTOR/MEP

Engine specifications

mc-c advantage,
compact design kya hai,

gear drive chain drive advantage and disadvantage,

how to remove air from refer,

centrifugal pump overhauling checks,

main bearing Clearance,

thrust bearing clearance,

bottom end bearing clearance,

pistons ring clearance,

boiler manual firing

09/08/2021

Internal meena

Ext ANIL BHAT

Safety

Torsion box

Dead wt light wt gross and net wt

Ism certificate and explain abt it

Life raft regulation

Fire in purifier room full up co2

Co2 how to operate and why 85% regulation for releasing?

Life raft static and dynamic test ?

Annex 1 full marpol

Motor
Rt flex and me differences

Pump used in rt flex

Alfa lubrication working in detail

Thrust block full why pads are tilted?

Rest don't remember.

9 Aug 21

Internal - GL Meena sir

External - Anil Bhat sir

Safety

What type of IG present in your ship?Various trips and alarms in IG

Pump room safeties and reg

Difference b/w pv breaker and pv valve

Emergency fire p/p reg

Heat detector reg

Smoke detector reg

Electrical

What is air gap?

What if the air gap is more?

And how much air gap should be present?

What is IM?

What is bus bar?

What is dead front panel?

What is overload trip?

What is preferential trip?

And how you will test preferential trip?

What is reverse power relay?

Different losses in transformer?

What is iron loss

What is copper loss

What is hysteresis loss

What is eddy current loss

What is slip in IM?

Why slip is provided in IM but not in synchronous motor?

Result- Electrical Passed

Safely Repeat

Motor,mep

Ext-anil

1.Indicator cards,types and description

2.how to detect early/late injection on draw card,

3. How to detect fuel injector leak in indicator diagram.

4. How to know faults in light spring card.

5. Detection of leaky starting air valve during engine running and at stop condition

6. Principle of hydraulic jack and the procedure for tightening.

7. How to remove a broken bolt or stud from a given location

8. How to detect shell type heat exchanger tube side leakage, and the remedy action for that.

Some more ,can't remember

Motor passed, mep repeat

9- Aug 2021

Ext-Anil bhat

Int- Meena

Types of lubriation

Difference between thick shell and thin shell

Refrigerant properties

Refrigerant lub oil properties

Remove air from reefer system

Hydraulic jack tightening

Resons Increase in temp of one ME unit

Reasons Increase in temperature off all units

Thrust pad bearing clearance how to measure

Pipe fabrication

What maintenance is done on STP

Motor pass

MEP repeat

9/aug/2021

noida mmd

int-meena

ext - anil bhatt

started at 4pm tota time 1 hr

fun-3

Difference b/w codes and convention.

wanted to know exact definition of code.

What is stutory and mandatory certificates.

what is GZ cure , how will you get GZ, GM,

WHY 57.3 degree angle.

angle of contraflexion , basically everything abt GZ curve.

Chapters of solas .

Before i cud finish answering he askd what is chpter 9.

then what is ISM.

what is the validity oF D.O.C .

Whta is SMC .

What flooding system you had . ( CO2 I SAID )

What was it HIGH PRESSURE OR LOW PRESSURE.

(i had no idea thta co2 system have two pressure system ).

Regulation for CO2 room.

What is safematic system.

How to take the carrier bearing wearout in rotary vane.

Then he asked will there be jumping clearance. ( i said no and the explanation)

DECIDER (which ship u wrkd )

What is the purpose of Isolation valve.

deck isolation valve and engine room isolation valve.

action when you see man overboard and you are in midship with no comms.

What is safematic system , he didnt accept the answer which bhatt sir has accepted asing for
more.

then purpose of p.v valve and p.v breaker. when will they come in role.
fun-4b and 6

what are safeties in M/E.

alarm and slow down of m.e

what is mean piston speed ,

what will happen when this speed is crossed.

what is the shape of botton end bearing bolt of a.e.

why we need to change it.

what is galvanic corrosion , acidic corrosion, pitting corrosion.

difference between cast steel and cast iron.

what is carbo percentage in them. cast iron properties advantages of cast iron.

why it is hard to weld c.i , why u need to heat c.i before welding.

how will you reduce oxygen in bolier water.

what chemical you add in boiler water to remoce oxygen.

what is vit and super v.i.t , how they work.

what could be the reason for water coming in gear box side of purifier.

how will you remove m.e exhaust valve guide.

DECIDER for fun 6

low peak pressure in no.5 of a.e what will you do.

cylinder oil non flow alarm comes what will you do u are on watch.

how will you take clearance of thrust bearing.

funt- 5

what are the navigation lights alarm, ( had no idea )

what is blackout, how will you test blackout onboard.

what the various ways to change speed of induction motor.

type of induction motor.

what is squirrel cage induction motor.

what is slip ring i.m.

what is role of resistors in slip ring i.m

what are the resistances in transformer.

what ih iron loss.

what is hysterisis loss .

what is eddy current loss.

some more in electrical.

external gave 3 and 6 and repeat 4b and 5

In decider internal decided to gave only 6 and 3 other repeat.

16/08/2021

MUMBAI

Int-Gauri lal Meena

Ext-Anil Bhat

Fn4b

*What type of ship/main engine?

*What is super long stroke, what is the difference between MC and MC-C?
*What type of drive is used for camshaft in your main engine, what are the advantages of a
chain drive over a gear drive?

*What is erosion plug in fuel pumps?

*How will you replace exhaust valve guide?

*Local manouvering and what alarms can't be bypassed during crash manouvering

*Why do we need an intermediate shaft in-between thrust shaft and tailshaft?

*Piston ring clearances and how to measure

Fn6

Hunting gear and without it what might happen?

Follow up vs Non-Follow up and why two different methods?

How will you repair a main l.o. shell & tube cooler mid operation?

Difference between thick and thin shell bearings and where they are used

6305 ZZ bearing specifications

Oil in hot well sight glass, what does it indicate?

How will you repair damaged economizer tubes mid sea?(exact words)

Different types of steam trap and working of thermodynamic steam trap

How will you fabricate a new pipe if the previous one has been damaged beyond repair?

During mid decarb sudden notice from bridge to prepare engine. what are your actions?

16/8/2021

Anil & Meena

Mep

Stp maintenance

Piston burnt out, how to check?

Refer suction freezing, what is the reason?

Electrical

Diode

Starters

Transformer principle n types

Capacitor, diode how to test.

Current transformer where used?

Rectifier?

Brushless generator

Int- Purna Manji

Ext - Anil Bhatt

Safety

Type of ship

Fixed fire fighting system onboard

FF system in cargo hold

Detector in cargo hold

How it works.

All Marpol Annexs

Annex 5 amendments

ISM code

DOC

SMC

And few more

Time -15 mins

Result - Pass
Thank everyone especially Saheem bhai and Mayur bhai

COC

Int-manji sir

Ext-anil bhatt

Motor

1) type of ship

2) Nomenclature of main engine

3) Indicator diagram. Explain all 4 in detail and lot of cross question

4) ship camless Or camshaft

5) wht drive the camshaft

6) chain ans gear drive.. Advantage and disadvantaged and lot of cross question.

Result-PASS

Thank u everyone especially saheem bhai and pranav bhai

COC

Int-manji sir

Ext-anil bhatt sir

Safety

Type of ship

Block coefficient

Prismatic coefficient

GZ curve full

Sprinkler system and hypermist system difference

slip and real slip

Pitch ratio
Fire detectors

Which liquid is present in smoke detector (dnt know)

Colour of fire detector

What does red, yellow colour indicates in detectors at what temperature

Result-COC

Thank u everyone for your help...

Internal : manji sir

External : anil bhat

Motor Type of camshaft drive

Advantages disadvantage of chain and gear drive. Elongation%

Crankshaft type

Detuner function

Dampers working

Material of tie bolt

Difference between cast iron and cast steel

Steering gear type

How isolation is done

Locking arrangements

Engine overload conditions and lots of cross

Many more

Got coc

Thanks to each and everyone for your support

25/08/2021

Mumbai
Manjhi sir

Anil bhat sir

Electrical

1. Single phasing

How to protect moter from single phasing

2. Thermistor

3. Thyristor

4. Single phase motor

5. Why capacitor is there

6. Eddys current and how to prevent it

7. Hystrisis loss and how to prevent it

8. Copper loss

9. Types of transformer

10. CT

11. Safetiest on alternator

12. In safeties of alternator what is alternator and what is in MSB

13. Difference between relay and contactor

COC

25/08/2021

Mep

Anil bhatt

Manjhi

1) Centrifugal pump low pressure. Reasons and many x questions

2) How to adjust fuel pump timing

3) Mac relief valve lifted reason?

4) Cargo pump checks before discharge

5) Hydrophore air leackage what to do?

6) Motor dipped in sea water, what all things you do?

Int: Manjhi

Ext: Anil bhatt

Fn-3

Deadweight

Displacement

Grt , nrt

CO2 flooding system

Why time delay in CO2 system

Leak alarm in CO2 why?

Shell expansion plan

Sheer strake

Garboard strake

Steering gear operation

Some more forget

Fn6

Creep

Crack in pump casing ?how will u rectify

Pump casing material

Cast iron welding

How to adjust fuel pump timing?

How to remove valve guide of exhaust valve

Fn 3- pass

6 – repeat

MUMBAI

27/08/2021

Anil bhat

Subbarao

Safety

Buttock line

Margin line

Rudders

Solas chapter 12

Hypermist system

Types of detectors

Electrical

Types of AC motor

Synchronous motor

Brushless alternator

Why no slip rings

Hw it is excited

Navigation light alarmsmotor on main deck wht is their speciality

Earth neutral system

Insulated neutral

Dashpot
Motor

Engine nomenclature

What do u mean by compact engine

Thick bearing thin bearing

Hw labryinth seal works

Mep

Tig

Mig

Tap and rimer

Bearing nomenclature

Domestic ref suction side frosting

Hw to take M/E bottom end bearing clearance

How to renew exhaust valve guide

got motor

31/08/2021

Int- Gauri Lal Meena

Ext- Anil Bhatt

Motor

1. Type of Engine

2. Difference between RTA and RT Flex

3. How much pressure in FO rail and how it is developed

4. Interlock on ME
5. Explain starting air line and safeties on it

6. How will you know leaking starting air vale

8. Firing order and it's significance

7. Type of turbocharger and it's lubrication

8. Matching of turbocharger

9. VTG

10. Type of compressor and why 2 stage

MEP

1. Overhaul of exhaust valve guide

2. How will you find out leaking tube on shell and tube condenser

Motor Pass, MEP Repeat

31/08/2021

MUMABI

Int-Meena sir

Ext.bhatt sir

Motor/Mep

Type of ship/engine.

Vit/super vit difference.

Which type of Fuel pump.

What is puncture valve,how it actuates(by stop singal n control air).

What is thick and thin shell bearing where it is used.

C/H lubrication how to achieve in B&W.

What is hydrodynamic lubrication.

*Ionization type smoke detector (cannot answered).*

*Steam trap fuction(latent heat he want to listen i cannot explain properly)*

Piston pressure test

Refere room not getring cool.

What is defrost how it is achieved.(he want to listen warm water)

Centrifugal pump not developing pressure reasons?

MEP pass

Motor repeat(because ionization and steam trap)

31/08/2021

mumbai

External Anil bhatt sir

Internal Meena sir

Safety

Codes & Convention

Prismatic coefficient

Block coefficient

Gz curve explanation

Firefighting system on board

Hypermist working

Garboard strake, intercoastal girder, coffin plate,

Floors

Frames

Electrical
Different induction motors

Difference between slip ring and squirrel cage

Wt is High voltage, advantages/disadvantage

HV safties

Vcb n Acb difference

Msb safeties&maintenance

Brushless generator explanation

Meena sir

Anil bhat sir

motor mep.

different bw mcc and me engine.

How fuel generating pressure in me engine

boiler safety vv egb safety vv different

accumulation test.

Mcr governor types. Governor droop.

Working of gov.

Interlocs working

air conditioner unloader working

improved safety vv

explain

indication of overloaded engine

2s 4s governor diff.

Result. Said 4b good need to study f6 more

15/09
MMD NOIDA

SUBBARAO SIR

ANIL BHAT SIR

ELECTRICAL

*Generator connection Star or delta

*Generator losses

*HV advantages disadvantages

*Hysteresis losses

*Induction motor and classification

*Insulated earth neutral system

*How to find earth fault

*ACB vs VCB diff. maintainance

rest forgot

SAFETY

*Steering safematic system (Bhai automatic isloation for unit start automatical second unit if
any leakage Wo wala bola)

*Annex name

*Explain annex 6

*Low pr. high pr. Co2 System diff.

*Explain Low pr. CO2 system

*Steering motor safety if one motor running (Locking arrangement)

*Bottock line , bilge keel and location

*GZ curve

*permeability of ship
some forgot

GOT SAFETY

NOIDA

SUBBARO SIR

ANIL BHAT SIR

Safety

1) chapters of solas

2) GZ curve

3) Portable Fire Extinguisher

4) Collision Bulkhead

5) EEDI n EEOI

6) chp 12 of SOLAS

And sbme cross ques

NOIDA

SUBBARAO SIR

ANIL BHAT SIR

Electrical:

1) Relay vs Contactors

2) HV system full

3) All starters in depth, timing n working, switching operation

4) Generator not producing voltage, how to rectify

5) Producing but not rated

6) Producing but not coming on load

And are you sure about it in every ques

15/09

SUBBARAO SIR

ANIL BHAT SIR

MOTOR MEP

Thrust bearing clearance

VIT and super VIT diff

ME and AE diff governor

Accumulation of pr test

How to remove O2 form boiler

Putting and hydrogen corrosion.

Crankshaft material, bed plate material and Tie rod material and there purpose

Electronic governor

Etc

NOIDA

SUBBARO SIR

ANIL BHAT SIR

MOTOR

Mc c xxxx

Type of turbocharging xxx

Chain drive xxxx

Gear drive xxxx

Thrust block xxx

Generator type xxxx

Centrifugal xxx
Advanatge and dis advantage of chain drive and gear drive

Swash plate pump xxx

Time for change piston nd exhaust vavle

Electromagnetic brake xxx

Light spring xxx

Power card cxx

Draw card xxxx

Compression card xxx

SUBBARAO NAY FAIL KIYA SUB BATAYA PHIR BHI

NOIDA

15/09

SUBBARAO SIR

ANIL BHAT SIR

Safety

Mast riser it's regulations

Pv valve and pv breaker and set points. Too many cross.

Ism full

Protection against pitching.

Parametric pitching ya rolling (naam hi nhi sunna tha)

Steering gear.

Type of rudder everything related to it.

Bhai construction m ghuss gya fr aur esa ghussa ki mai fass gya. Terms sunne hi nhi the ese.

Maintenance on hypermist system

Motor

Fiva valve working

Alpha lubrication

Torsional vibration

Working of axial damper

Detuner

Top bracing

How servo pump works in ME engine

How interlocks of main engine function. How they stop control air .

Water hammer steam hammer.

Steam traps

Material of steam trap

Many more.. i forgot.

Electrical

Vacuum circuit breaker its working

How bus tie works. Ispe bhot cross questions.

Air gap and cross question

High voltage questions.

Many more i forgot.

3 & 4b repeat

Electrical done. @⁨Saheem Khan⁩ your notes helped a lot.

Bhai kunjal shah is not enough for naval architecture. There were many questions which i
never heard of in naval architecture.

Material of ionisation type smoke detector plates

15/09/2021

Noida

subbarao sir

Anit Bhatt sir

adha kharab adha bdiya

Fn4b &6

Sare mix h to bhai dkh lio konsa kiska h

1.how to order bolt

2.how to order grinder wheel

3.crankweb deflection (maine crankshaft deflection bola )

4.how many hours we take deflection

5.how many hours we do M/E decrab.

6.exhaust v/v overhaul after how many hours .

7.type of vibration (axial and radial)

8.what is axial vibration and how to minimise

9.detuner

10.T/C lubrication where pump is fitted which type of pump.

11.k value and L value ..air clearance

12.type of bearing in T/C

13.how blades is fitted in T/C

14.laybirth seal what it do

15.how to remove broken stud . speciality of excretor bit & stud excretor .what excrator bit
do

16.unloading mechanism in refer system

17.centrifugal pump not taking suction ..told everything then said okk ..he he ask suppose all
you tell are in good condition but still not taking suction then m phirse same btane lga ..to
bola pum ke bhar diqat ni h andar h what u will check during overhaul..then told wear ring
worn out or mechanical seal leakage ..then sait okk

18.check for overhauling centrifugal pump.

19.NDT test

20.magnetic test pucha to isme bola sir radiology ya ultrasonic puch lo vo dono aate h tb
hasne lga bol koi baat ni phr next ques.

21.cocktail effect (ye to pheli bar suna)

Bhai jo direct ques the unme to btaya but cross ques me fasa diya ..

Result ...fn6 clear

fn4b repeat

Noida

15/9/21

Subbarao sir

anil bhatt sir

When ship moves from fw to sw what things will change?

Margin plate

Sheer strake

Framing

Margine line and its relation with plimsoll line

How much area smoke and heat detector covers?

New amendments in annex4,5,6

If ozone released in atm where you will enter?(ods record book)

Nox technical file

Stiff and tender ship,which is preferred?

Dynamic and static stability

Damage stability

Diff bet pfe and spfe

maintenance on pfe

MMD Noida

Function 3

Ext - Anil Bhatt

Int- Subbarao

Type of Ship ( LNG)

Type of Tanks

Which type you had

How was it fitted to hull

Daily BOG

Insulation Material of tank

Fixed system in Engine Room

Hypernist Testing and type of pump.

Flame detector activation temperature in Hyoermist

Mast riser regulations

IGC and IGF Code difference

Definition of Liquified gases

Margin Line

GZ Curve

How to get Intial GM from it and why ordinate is taken at 1 radian.

Angle of Loll and how to reduce it.

Steering Gear regulations

Result – Pass

20/09/2021

MUMBAI

Meena sir

Anil bhat

SAFETY asked by Meena sir

Which ship

Cargo carried

Peculiarity in carrying iron ore

Mositure content. Why is it important

Sagging and hogging

Collision bulkhead

Enclosed space entry

Fire fighting in cargo space

Fire fighting in E/R

Water sprinkler system

Cross question on each question

Electrical: all ask by Anil bhat

Induction motor types

Transformer types

Zener diodes

Types of fuses

Explain HRC
Thyrostor

Thermistor

Lots of cross question on each question

Some more can’t remember

Internet connectivity was very poor didn’t hear the result.

Mumbai

20/9/21

Internal:

Gauri lal meena

External:Ani bhat sir very nice person

Flare

Marpol annex all

4,5 Amendment latest

Gunwale

Margin line

Permeability 100percentage means ER accommodation how much

Co2high pressure low pressure diff

Time delay unit

Leak alarm

Intercoastal girder

Bw management d1 D2 means

Shell expansion plan

Watertight weather tight difference testing

Few more forget

Result: pass

Thanks shaheem bhai all orals cleared

22 sept

Subba rao sir

anil bhat sir

4b and 6

1) Starting air line interlocks

2) what type of governor in your ship and what is droop.

3) boiler water treatment.

4) what is the use of accumulation pressure test.

5) VIT, SUPER VIT where u connect.

6) NPSH and NPSHr

7) air cooler efficiency decreased what indication u will get.

8) how fabricate a pipe.

Many more

Result:4b

Function 6 repeat

24 sept

Anil bhatt

Subbarao Sir

How will you take out exhaust valve guide?

2g,3g,4g

Tig vs mig

Shell and tube type heat exchanger leak

Piston ring clearance

6305zz bearing spefication

How will you find out air starting valve is leaking?

Result - Pass

Thanks a lot saheem khan bhaai

Subbarao sir asked about what if ig o2 content increases what will happen?

Gear and chain drive puchne wala tha but boldiya me engine tha

24 Sep 2021

Mumbai

Subbarao

Anil Bhatt

Safety

Shell Expansion plan xx.

Continuous Synopsis report.

Loadline, what will happen when ship goes to sw from fw.

Bulk carrier safeties (told chapter 12 of solas) xxx.

Fixed fire fighting system.

Fire extinguisher.

Portable and semi portable

Foam extinguisher.why chemical foam not used.

Lifeboat load test static and dynamic.

Anti caking and which dcp powder used.

EEDI and EEOI difference.

Result-Pass
Electrical

Type of transformer.

How residual current is stored.

Insulated neutral and earth.

Result-Repeat.

24/09/2021

Subbarao sir

Anil bhatt sir

Function 3 safety

Type of ship

Which code is applicable igc or igf

Types of tanks (lng carrier)

Insulation material

Boil off rate of LNG

Statutory certificates and mandatory certificate difference

Which type of life boat

Static and dynamic testing of life boat

Types of rudder

Rudder is hollow or solid?

If solid, what will happen

Rudder drop

Jumping clearance

What type of fixed fire fighting system on ur ship

Hypermist sytem explain

Detetectors for hypermist system

How flame detector works

Type of pump for hypermist system (Fresh water or sea water)

How is sprinkler system different from hypermist system.

Orange red and blue bulb temperatures

Parametric rolling and pitching (dont know)

Function 5 electrical

High voltage system advantages and disadvantages

Single phasing and how to prevent

If generator not developing voltage what will u do

What to do if residual magnetism is lost

Where is exactly is the excitation given in generator (dont know)

Types of induction motor

Where slip ring motors are used

How are slip ring motors different from induction motors

How is speed of motors controlled

Rest forgot

Result: both pass

Cleared all 4 functions....thank you sahim bhai...your channel helped a lot...truly thankful to
you for the help...

MUMBAI MMD

24/09/20121

INT- SUBBARAO
EXT- ANIL BHAT

FUN-5 ELECTRICAL

1. Operating Principle of Induction motor

2. Types of Induction motor

3. Difference between wound type and squirrel cage IM

4. Advantages of wound type over squirrel cage

5. Alternator Safeties

6. What is HV and application

7. Advantages and disadvantage of HV

8. Safeties on HV

9. Transformer Losses( specifically asked hysteresis loss)

10. Lenz's law

11. Generator not developing Voltage reasons

12. Procedure to recover residual magnetism

13. Difference between Thermostat, Thermocouple, Thermister

Result – Pass

29/09/2021

1st attempt

Subbrao sir and anilbhatt sir (both are good)

Fn 4b and 6

Show passport and tar book

Indos No. Name

Fn 4b
- Engine type and specs.

- Types of lubrication

which type in my ship

- Why its difficult to lubricate cr.head

- How crosshead bearing lubricated,

- thinshell and thickshell bearing with example

- how camshaft rotates (how to check the tightness of chain (he want proper answer he is not
satisfied), how to tighten it)

- What is T/C ( how blades are fitted, what type in my ME, advantages of const.pr type, types
of bearing used)

- what is labrynth seal ( material (kabooth) and its working)

- how to remove exhaust valv guide bush ( how valv spindle fitted to the valv )

Fn 6

- how to fabricated pipe with zig zag bending (not straight) (i told everything but my ansr not
accepted)

- boiler accumulation rp test

- refer compressor V belt how to tight? ( How to know the belt is reusable or not ( he is not
satisfied)

- AC compressor unloading mechanism working

Result- fn 4b pass fn 6 repeat

Thank you saheem bro for your Youtube videos and notes it helps me alot.

29 Sept

Subbarao

anil bhat sir

Motor

Mep mip
Exhaust temp going up on

one unit and all units

Overloading in detail

Exhaust valve opening timing how to figure out

Surging

Vernier calliper

How to overhaul globe valve

Got 4b

mep repeat

Mumbai mmd

Subbaro sir

Anil bhat sir

Type of ship and engine

*all four*

safety

1. watertight door weathertight door x que

2. cargo hold fixed firefighting system x que

3 freefall lifeboat maximum launching speed

4. solas chap all names and explain chap 12

5. static dynamic load test of davit and x que

6 ODS

7 types of floor and cross question

8 GZ curve and x why only 57.3 degree

Electrical
1 alarm in navigational lighting

2 earth fault 220 and 440. how to find

3 types of fuses

4 ESB safeties x que

5 windlass motor safety x que

6 types of losses in transformer

7 why air gap is there in alternator and value

8 function of heater and how to operate it x que

Mep Motor

1. How galvanising is done in pipe and why we need?

2 ws exh valve how guide is fitted

3 why we turn quarter turn in jack. x que

4.Me engine how cylinder lubrication takes place x que

5 How to simulate lub oil low pressure alarm

6. Function of stagnation control valve

7 how to check lub oil high level alarm

8. Sterntube fwd seal tank is overflowing reason

9 how iccp works

10 what is hydrogen corrosion how to reduce oxigen in boiler water x que

11 difference between tig mig

12 bearing 6305zz

13 sewage test and values

14 ht lt water test

15 types of vibration and detuner how to avoid and x question

16 how many cylinder to require to starting and x que

17 head or liner crack how to find and how to know whether jacket crack or liner crack

18 types of wear in liner and x que

19 how many clearances are there in cross head

20 how galvanising is to be done in pipe and why?

21 sfoc

22 how expansion valve control constant degree of superheat

23 spheroidal heat treatment and why we do heat treatment

Got 3 function 6 repeat

Very big thanks to @saheem4

18 oct

mumbai

Ext subbarao

Int Anil bhatt

Function -motor

Rta vs rtflex

Pulse lubricantion full and x questions .

All indicator diagram full explain in details .

What is overlap period .

Hydrazine in boiler

Priming and foaming in boiler and effects of it .

Rest forgot

Result =pass

Ext : Anil bhat

Int : Meena

Mumbai mmd

25/10/2021

Function - MEP

1.What major maintenance you carried onboard? (I said Linear change)

2.How liner calibration is done?

3.In liner calibration how you know it's exact diameter?

I said we will use template place the dial guage and move it, the largest reading is the exact
diameter

4.In what Direction you measure? And why? Port star board and because of side thrust

5.How will you contruct a long 2m Zig-Zag piping? Took lot of time in this, I Didn't answer
well, everything he disagreed

6.How to charge oil in refer crankcase?

(Same textbook procedures I said - vacuum and hand pump method)

7.What is Nitriding? Where those material used?

(Cam, gears, crankshaft)

8.Difference between Case Hardening and Nitriding?

9.What is annealing?

10.What is Normalising?

Result - COC

Anil Bhat is nice guy (he actually skip the question if I stuck and ask me something more
easy)

Thank u everyone for your valuable help!

Saheem has made some really good and useful study material. Thanks bro!!

[Please go through oral questions of that external on same day]

Mmd Mumbai

25/10/2021

Int- Meena

Ext-Anil Bhat

Fn3

-What is Ballast water management, why required.

-What is D1 and D2 standards

-What system was there onboard your ship for BWM.

-What entries are made in ballast log(I said don't know)

-What are plate floors, girder, types of girder, what is intercostal girder.

-Type of fire fighting system for engine room

-Working of hypermist system. How will you test it.

-difference between hypermist and sprinkler system.

-co2 maintenance 1 , 5 and 10 yearly

-What is ORB, weekly entries made.

-Type of LB onboard ur ship.

-Lifeboat testing (static and dynamic). Where it is done and why not onboard.

Internal- Which type of ship, pump room safety.

Coc

Thank you all for your help. Special Thanks to Saheem Khan.

25/10/2021

External: Anil bhat

Internal: Meena sir

Function3
1)Type of ship(bulk carrier)

2)Special requirements for bulk carrier(solas12)

3)Water tight door and whether tight door xx

4)Life boat static and dynamic testing

5)Cargo space fire fighting , location of detector

6)what is high pressure co2 and low pressure co2

7)fire fighting in co2 room

Electrical

1) type of transformer

2) losses in transformer

3) alarms navigation light

4) earthed neutral and insulated neutral

5) why transformer is rated in KVA

Meena:

Bulk carrier additional requirements

Purifier room fire fighting

25 oct

mumbai

Internal Meena (super human)

External Anil Bhatt sir (dev manus)

1. Bilge suction valve damaged , no spares & lapping not effective what would you do ( I said
seat cutting )

2. How to do seat cutting .

3. Motor salvaging.

4. Exhaust valve guide renewal .

5. Oxy acetylene safeties .

6. 2G ,3G & 4G welding .

7. Difference in TIG & MIG welding .

8. Liner calibration & why we do take readings for p-s & f-a

9. How to take thrust block clearance.

10. 6305zz bearing what it is ?

11. Con-rod ovality check .

12. Cylinder head pressure testing

COC

Result ~ 4 sahab bann gaya

25.10.2021

Mumbai MMD

Ext. Anil Bhat Sir

Int . Gauri Lal Meena Sir

Fn 5

Synchronous motor vs induction motor

Synchronous motor working principle

What is slip

How to control speed of motor

Applications of wound rotor and squirrel cage rotor

Applications of synchronous motor

Generator not producing voltage reasons

How to do field flashing

Generator producing voltage but not coming on load reason

What is droop

What is IP56

Type of rotor used on biggest pump on ship

Power factor improvement method

What is power factor

Why to increase power factor

Transformer principal

Transformer types

Why no DC in transformer

Passed

Internal Meena (

External Anil Bhatt sir

Function..mep

How to order bolt and grinding wheel when you don't have impa

Overhauling globe valve and material of valve seat

How do you fill lube oil in domestic refrigerator

Reamer tool and tap

All the heat treatment process and application

How will you replace valve seat

Centrifugal pump overhauling

Purpose of lantern ring

Fretting and pitting corrosion

1g 2g welding

Thank you everyone

And like everybody address love you saheem Khan bro what you did is
indelible.....COC

29 OCT

MEENA SIR

ANIL BHAT SIR

Fun 3 mostly asked all the deadwights just confused in everything

2 CO2 system

3 safematic system proper

4 cargao linkage in pumps how to know.

Elect

1 motor used in steering and difference betn normal and steering motor

2 neutral and earth earthing system

3 3 wire system and 4 wire system

And many cross questions

29/10/21

Ext: Anil bhatt sir

Int: Meena sir

Motor

Me type

Turbocharger type and construction

K value

Labyrinth seal material

VTG

What is Detuner

Torsional vibrations and how to dampen it

Guide bushes

Types of corrosion

Hot corrosion and cold corrosion

How will u replace guide bush in exhaust valve

Graphiting

How will you find air starting valve leaking while stopped

How to adjust fuel pump timing

MEP

Drier chocked, how will u find out?

Boiler water liquid coagulation

29 oct

MEENA SIR

ANIL BHAT SIR

Fun 4

Me nomenclature

Adv n dis of chain drive n gear drive

Piston cooling

Adv n dis of oil n water cooled(atlest 5 pt)

Material of piston, what all is there in piston

Detuner

Tortional vibration(how to reduce)

Fresh water treatment

Foaming n priming

Steam trap

Accumulation test

Cast iron

Difference betn cast iron and steel

Advantage n disadvantage of cast iron

Ionization smoke detector

Fun 6

How to weld zig zag pipe(whatever u say he will not agree)

Difference betn case hardening and nitriding

Difference betn annealing and normalizing

And more cant remember

Got fun 4.fun 6 repeat

Meena sir come and said bass karo sir.. Kitna puchoge

29/10/2021

Internal : Meena

External: Anil bhat

Motor and Mep

1.Type of ship and Engine (6S50MC)

2. What is 'C' in MC engine.

3.How Camshaft is driven

4.What are the advantages of Chain drive.

5. Thrust Bearing construction.

6.Why tilted pads on thrust bearing?

7. How to measure thrust bearing clearance.

8. Safeties in Refrigeration system.

9. How do you know if Main compressor suction and discharge valve leaking

10. What is Annealing, Case hardening and Nitriding.

11. What is Fatigue failure?

12. What is Creep?

13. What is Follow up and Non follow up.

14.What is the function of Hunting lever.

15. In 6305ZZ bearing what is 6,3,05 and ZZ.

Few more cross questions.

Motor Pass

MEP Repeat

INT : meena sir

EXT: anil bhat sir

Safety

Windlass break test

Life boat static and dynamic testing

Coffer dam regulation

Air pipe and sounding pipe regulation

Vent pipe

Co2 high pr and low pr

CSR

Int :- Meena sir

Ext:- Anil bhatt sir

1. Type of engine

2. RT flex and RTA engine diff

3. Type of lubrication system on your ship

4. Pulse lubrication

5. Thick shell and thin shell bearing

6. Thick shell bearing advantage

7. Crosshead bearing clearance

8. Thrust block

9. Thrust pad shape

10. What if the shape of the pads are rectangular

11. Refrigeration capacity regulating valve working

12. Indicator card

13 . Exhaust temp high one unit and all unit

15. Npsh....npsha and npshr

16. Refigerant lubricating oil properties

12-11-21

int-siresh sir

ext-anil bhat

Fn-3, Safety

PV valve

PV breaker

Mast riser and its height

SCBA and EEBD difference

How to fill SCBA onboard

What is frame

What is floor and types

Static and dynamic Testing of lifeboat

What kind liferaft was there

Watertight and Weather tight door and its testing

Where these doors are fitted

Type of fire fighting system in Engine Room

Acetylene Bottle safety

Is Annex 2 Valid on your ship (No...Crude oil Tanker)

Result: Cleared

Special Thanks to Saheem Bhai

NOIDA

12/11/2021

Internal: shrish sir

External: anil bhat sir

Function 3

1.GT

2.NT

3.DWT

4.LWT

5. Permeability

6.shall expansion plan

7.DPA and duty of DPA

8.annex 1 engine room bilge discharge criteria

9.flame eye

10. Type of sensors used in engine room

11.what type of sensors used in galley and working

11.What type of sensors used in boiler and incinerator and working..

Some more questions

Function 5

1.Msb safety

2.Death front panel

What is mean by insulation resistance value

3. IR value for new winding

4. Low IR value

5.what happens if IR value below 1

6.what is Earth neutral system explain

7.What is the insulated neutral system and explain

7.advantages of earth and insulated neutral system

8.fuse type and its function

9.Emergency generator weekly test

10. Emergency generator load test

11. How msb and esb connected

12. What intrinsically safe circuit

Results

Fun 3 repeat

fun 5 pass
Safety

Ext: Anil Bhatt

Type of ship

Anx 1 discharge criteria+ special area definition and difference between area and other area

Gz curve

Initial gm

Gz curve

Angle of loll

How to correct it

Cross curves

Angle of contraflexure

Flare

Fire fighting system installed

Difference between hypermist and sprinkler

Different bulbs used in sprinkler

CO2 regulation

Leak off alarm

How to make sure 85 percent discharged in 2 mins

Parametric rolling

Audit conducted on ship

Who conducts it

Flagstate vs port state

Result : pass

Thanx to rab k bande @saheem bhai

Anil Bhatt

Sirish

Bulwark

Shoe plate

Lifeboat regulation

Solas training manual

Parametric rolling

Ism

How to know ism is effective on ship

More forget...

Most of the questions were from previous questions of anil Bhatt and were repeated

Result pass COC

THANKS TO SAHIM BHAI AND EVERYONE IN THIS GROUP

12 nov

noida

External: Anil Bhat

Internal: Shrish kumar

MEP MOTOR

12/11/2021

RTA versus RT Flex.

Control oil pump type.

Can gear pump build 200 bar pressure?

Interlocks of main engine.

Scuffing. CloverLeafing.
How xhead is lubricated in Sulzer?

Why it is difficult to Lubricate cross head.

How turning gear interlock works.

Limit switch is stuck. Now what is preventing air from going Inside the cylinder.

How saftey valve works

Main engine fuel pump type.

Why compression in two stages.

What determines air bottle size?

Why six starts?

What is hot corrosion? What is called cold corrosion?

Ballast pump casing is damaged n have hole cannot do cold repair. And need to use the
pump.

Valve is badly damaged tried lapping, but still not holding. What will you do?

Isothermal compression adiabatic compression.

What is oxy-acetylene welding? Safeties of oxy-acetylene welding?

Stress relieving.

Axial, piston pump how it works.

Cast Iron Welding.

Main engine Main bearing. It got tuck while taking out. Now. What will you do? How will you
take out?

How piston is cooled? What is the advantage of Oil Cooling. What is the the disadvantage of
oil cooling?

How to check fuel pump timing. When there is no marking on fuel pump and no marking on
flywheel

Steam trap. Why are using them?

Zig zag pipe welding

Decider question.

How will you check boiler low low level alarm?

Thank you all. Keep posting questions. It really helps.

Thanks saheem bhai.

Got both

Internal : Majhi sir

External : anil bhat sir

Function 5 ( Electrical)

What is mean by brushless.

How is the current present their for self excitation.

What dc excitor rotor made of.

Rectifier rotates with shaft then how ac is converted into dc.

Which materials have Residual magnetism.

Commutator & rectifier difference.

Relay & contactor difference.

How star connection changes to delta connection in star delta starter.

Soft starter & auto tranformer stater difference.

How msb connected to esb.

Esb definition.

Where is shore connection given.

How to stimulate reverse power trip without starting generator.

How to rectify the earth fault without stopping the machine.

How half & full wave convert ac to dc.

Where is dash pot provided & why & how it works.

If earth fault happens in steering gear system when out at sea...how u will rectify it.

How will u rectify 220v & 440v earth fault without stopping the machine.

Duration 30min.

Repeat (said good in theory but practically need to know more things)

Internal- Manjhi sir

External- Anil Bhatt (very helpful)

Type of engine

Make and model

Types of cards

Cross question on Draw card

If leaky injector which card will it show you on

Why 90 degress out of phase

Phosphate test ?

Why ?

Priming and foaming.?

Types of turbocharger

Methods of turbochargering

Material of blower and turbine.

How it's the turbine side fitted

What is K value

How do you find it

Advantages of oil cooled piston

Disadvantages also.

How to change timing of fuel pump

How will you know the timing of fuel pump is wrong ( I messed up here )

Changed gland packing of pump. Yet it is leaking.

What to do ? Also couldn't answer

Result : motor pass

Mep repeat.

25 Nov

mumbai

Internal - Purna majhi sir

External - anil Bhat sir

Mep/motor

Type of engine

Difference between MC and MC-C

What is axial vibration.

What is torsional. vibration, ho to take care

2g 3g 4g welding

How to take main bearing and bottom end bearing clearance.

Refegrant properties

Refer compressor LO properties

What is steam hammer / water hammer

What is steam trap.

Suction side of refer compressor frosting reasons.

Starting air interlocks

Turning gear interlock working

25th Nov 2021

Internal:- Manjhi Sir

External:- Anil Bhat

Function 3

Point of contraflexure

Sheer strake

Dead stability

Metacentre

Position of metacentre in dead stability

Type of lifeboat

Deadman handle

Lowering of lifeboat

Lifeboat regulations

CO2 system safeties

How to weight the CO2 bottle, what precautions you will take

Where safety valve is fitted in CO2 system

Why time delay is provided

Why bursting disc

Ventilation in CO2 room

What is the difference between CO2 alarm and fire alarm and general alarm

Function 5
What is single phase

Difference between commutator and slip ring

Difference between contactor and relay

Type of induction motor

How squirrel cage induction motor works

Why single phase motor is not self starting

Arrangement for starting single phase motor

Function 5 Clear

Function 3 Repeat

Said you have good knowledge but need little bit practical knowledge repeat function 3(I got
stuck in CO2 total flooding questions )

25 Nov 2021

Manjhi Sir

Anil Bhatt Sir

F3

Difference in sprinkler and hypermist

Quatazoid temp

PV valve PV breaker diff

At night any difference in PV valve operation - I said no difference

Lifeboat regulations

Dead man handle

Foam ingredients

Diff in high exp and low exp foam xxx que

Low pressure and high pressure CO 2 system - difference and where they are used
What is margin plate

What is gunwale

What is hopper tank

Diff in sprinkler and hypermist- why sprinkler not used in ER

Also diff in MLC and STCW

And few more

F5

U have 2 gen and one of the Avr is faulty how will u manage till next port..

I only said current flowing will be different KVar load sharing effected.

Induction motor

Navigation light safeties

MSB and ESB xxx que

Limit switches

And many more

Result Pass

Thanks to Saheem bhai

02 dec

NOIDA

Motor mep

Meena sir

Anil bhatt sir

1) engine specification for ME and AE

2) tell firing order of ur engine

3) type of turbocharger on AE and how to do grouping

4) fw principle nd cross question

5) significance of gravity disc

6) difference in obornad refer nd domestic refer at home nd oil properties

7) steering gear air interlock nd how to purge 8) gear pump overhaul nd backlash how to
measure

9) temp of meat room not coming down reason 10)refer short in compressor how will come
to know

Rest forget

2 DEC

NOIDA

anil bhat

meena sir

How to remove exhaust valve guide

Capacity controller in ac system

Zig zag pipe fabrication

Detuner location function

Cankcase checs

Saftey in cylinder head lifting

Injection timing setting of furl pump

Resonance and vibration

How to reduce tortional vibration

Tappet clearance

Big end bearing clearance how to take and value

Type of indicator dig

Draw cards how it is 90degree out of phase

Why we take draw and spring card

What is your ship and specifications Mc or ME

Chain drive or gear drive

Advtg of gear and chain drive ..disadvantate

How to take tappet

Diffrent types of fuel pump

Decider - how to mark tdc on flyweel and how to mark injection timing of fuel pump

Thrust block location purpose ...thrust bearing clearance...

Governor it controls load

Internal:Meena

External:Anil bhat

Safety 2nd attempt

1 how will you know if there is leakage during cargo Operation.

2 enclosed space entry

3 which code is applicable on your ship

4 block coefficient

5 prismatic coefficient

6 difference betn watertight and weather tight door

7 where watertight door is located

8 rudder aspect radio

9 semi balance ruder why is called semibalance and how much part is located aft.

10 gz curves

11 x axis y axis what is there

Itna hi yaad hey sala kabi suna nahi eshi chijey puchta hey
Result:Fail

Safety me

Anil bhatt sir hai to

Watertight weathertight door puchega hi puchega,

Gz curve puchega and why 1 rad puchega bhai log.

Electrical me

Types of transfromer and dc or ac(dc transformer nh rehta kabhi)

Fun 5

Int meena

Ext anil bhat

Alternator safety

Semi conductor

Zenor diode

Scr and where use

Transformer and its rating and why

Motor rating

Int

Difference between high-voltage and lv

Explained everything in detail, so they don't ask much cross

Result pass

COC

Big thanks to Jacob sir for your valuable guidance, you will remain in our hearts

thanks to amal anoop ShaRukh and saheem..

Purna majhi

Anil bhat

Function 3

Safety..

1.wt is dead weight,GT,nt

2.wt is garbord starke

3.wt is safe matic system of steering gare .

4.wt is ballast water management plant....in..ur ship..is there?

5.why time delay in CO2 system....,CO2 alarm is general alarm?... difference between high
pressure and low pressure....of CO2.

6.wt are the pollutants in the annex 6.

7.wt is ODS,WT ARE THEY?

8.difference between watertight and whether tight doors......and where u test ..water tight
doors...

9.block cofficient

10.pitch of the propeller.

11.wt is keelson propeller....and how do u fix the propeller to shaft.

12.wt is SMPEP

13.wt is EEDI AND EEOI

Result pass bro....coc

29/12/2021

Int :-manjhi sir

Ext:- anil bhat sir

MEP

Fabrication of pipe
Annealing

Normalizing

Hardening

Case hardening nitriding

Removal of ME exh vlv guide

Vernier calliper

Coc

Special thanks to saheem bhai, abhishek, arun, shobit, omkar, ganesh sirs

Saheem bhai thanx

29/12/2021

manjhi sir

anil bhat

difference bw tender and stiff ship

hyper mist and foam system lot of cross questions

margin plate , girder, intercostal girder

ballast water management plan and use on my ship

difference between D1 and D2

Solas chapters

Solas chapter 12 complete

result pass

29/12

manjhi sir

anil bhat

motor mep
main eng type

mc vs me

starting system interlocks

bottom end clearance

thrust block

sewage treatment checks

ac capacity control

how u order bolt, grinding wheel

boiler type

vit n super vit

Anil Bhatt sir

And 2 more surveyor

Mrol

Lube oil test

Tig vs mig

Cast iron welding

Work permit

Annealing and normalizing

Ndt and types

Explain dye penetration

Icing on suction side reason

Critical temp of cast iron ?mean

Critical temp of steel ?value

Pass coc
Anil Bhatt sir

Manjhi Sir

Function 4B

Crankshaft deflection

Indicator Diagrams

Fuel pump (Sulzer)

Nitriding

Hardening

Annealing

NPSH

Function 6

How to find tube leak in heat exchanger

How to plug

Ballast pump casing crack?

How to remove broken bolt?

Pipe fabrication?

How to make jig?

How to make bends in pipe?

Fuel valve overhaul?

Both pass

Thanks to Samant Sir

Thanks to HATC family

Thanks to Akshay Negi

Thanks to Vrashank
Thanks to Sidhant

Thanks to Sabrit

Thanks to Abhijit Bera Sir

Thanks to Saheem Bhai

For all of your support and time.

Ext: Anil bhatt

Int: Majhi

1. How will you order grinding wheel?

2. How will you order bolt?

3. How to check main engine piston material removal on crown( using template)

4. How to check main engine fuel pump timing

5. How to do piston pressure testing?

6. Air removal from Refer system

7. Moisture removal from Refer system

Result coc

External - Anil Bhatt

Internal - Majhi

Electrical

Induction motors , types

Squirel cage IM

Slip ring IM

Where these r used

Advantages of Squirel cage over slip ring

Thermister
Thermostat

Thyrister

SCR

Dead front panel

Commutators and Slip rings

Contactors and Relay

Steering gear motor features

Mep

Fuel pump timing

How will u check

Pipe fabrication

Oxygen and acetylene bottle safeties

Stern tube LO leaking immediate actions

and some more

Result - pass

COC

Thanks Jacob Sir for making the basics clear

04/02/2022

Int - MAJHI Sir

EXT- ANIL BHATT Sir

Safety

code and convention

Statutory and mandatory certificate

Static and dynamic loading test of lifeboat

CO2 system

Cargo hold fire detection system

Lifeboat onload offload

Brake test of lifeboat

Shell expansion plan

Deadman handle

Continuous synopsis record

Gz curve

Got coc

Internal-Majhi sir

External-anil bhatt sir

Fun-6

Globe v/v overall

how to preassure test fwg and regular maintenance

Bolt broken removal procedure

Bearing number description

How to order nut and bolt

How to order grinder wheel

Piston broken how to check it

How to check crack on piston

Piston pressure test procedure

How to check fuel pump timing

How to change fuel pump timing

Thnx alot saheem bhai for everything

Internal-Majhi sir

External-anil bhatt sir

04-02-2022

30 to 35 minutes

MEP (18 TO 20 TMINUTES)

FWG routine

STP routine

What is follow up nad non follow up.

What is hunting gear (so many cross questions)

What is electronic governor

Working of electronic governor

What is difference between M/E and A/E governor...

How A/E camshaft roted(I told, by gear then he asked any other then he told me by chain
method..

Difference between chan drive na d gear drive

Advantage of gear drive over chain drive..

How to tight chain in chain drive.

He asked you ballast pump casing get cracked how you repair.

Material of Ballast pump casing

MOTOR (10 TO 15 MINUTES)

Type of ship
Type of engine

Tie rod where it is fitted

Tie rod material

What is crankshaft and its types

How many types of crankshaft

Which crankshaft have your vessel

What is thrust block and how thrust transfer to hul.

Thrust pad and thrust coller. which one is rotates thrust pad or thrust collar..

How M/E fitted ( i told there is a sleeve between tank top and m/E BED plate and tighted by
nuts and bolts by hydraulic jack

Pass- MEP

Repeat -MOTOR

04-02-2022

Anil Bhatt

Function 3

1. All SOLAS chapter name?

2. Chapter 12

3. Solas regulations of emcy fire p/p?

4. Emcy bilge indicator? And to which p/p it is connected?

5. Continuous synopsis record?

And some more I forgot

Pass

External – Anil bhat sir

1 what is TEU

2 Fire fighters system on ship for cargo hold

3 how it detect

4 leak off alarm and at what pressure it

5 what is a convention & code different

6 what is ISM

How will you know ISM is followed in your ship

7 what is non conformity and major non conformity

8 what GZ curve

9 what is angle of contraflexure

Why only in one radian

10 SOLAS req fir steering gear

What rudder angle restricted to only 35° what not more

11 what is light weight, what is dead weight

12 what is GT & NT

And its unit

Coc

Thank you everyone one

23/02/2021

Anil bht

Majhi

-Types of chemical tanker,

Types of cargoes ,difference btween

-Rudder type, diffrnce btrween rotary and ram type advantage, Jumpng clearnce

-Co2, leakoff,delay 20sec non return why head space(2.4)

-D1 D2 ballast ,date wen came,type of chemicl

-Deck foam, type of foam foam ratio

-Steering what type, huntng gr ,type of pump diffrnce btween halshaw, swashplate.

23/02/2021

Anil bht

Majhi

-Types of chemical tanker,

Types of cargoes ,difference btween

-Rudder type, diffrnce btrween rotary and ram type advantage, Jumpng clearnce

-Co2, leakoff,delay 20sec non return why head space(2.4)

-D1 D2 ballast ,date wen came,type of chemicl

-Deck foam, type of foam foam ratio

-Steering what type, huntng gr ,type of pump diffrnce btween halshaw, swashplate.

28-02-2022

Safety and electrical

Int: meena sir

Ext: anil bhat sir

Safety
Propeller slip

Apparent slip and true slip

Hypermist

Hypermist testing

Sprinkler system

Panting and pounding

Racking

Navigational light alarms and location

Convention and code

Statuatory and mandatory certificates

GZ curve

How to find M

Incling experiment

Righting lever

Continous synopsis record

OMDCS

Electrical

Single phasing- protection, causes, effects

Earthed neutral and insulated neutral

Induction motor types

Generator winding connected star or delta

Transformer types
Transformer principle

Transformer losses

Safety repeat

Electrical pass

[3/2, 3:01 PM] +91 73879 91343: 2/03/2022

Manji/ Anil bhutt sir

1...type of ship sail

2... difference in product and oil tanker

3..GZ curve full cross questions angle of contracflecture, angle of vanishing stability

4...IG system

5...PV valve and PV braker

6...mast riser regulations

7...rescue boat regulations

8... difference between watertight door wethertight door

9...IG what is 2%

10... New ammendment for Annex 4,,5,,6

11... ORB entries weekly and monthly

12...ODS entries

13... Annex 6 full

14...test on life boat

15 ... Static stability test and dynamic stability test

COC

[3/2, 3:02 PM] +91 73879 91343: Wankhede

Ext (don’t know)

1:overboard Pipe leak action?

2:how will u make cement box

3:what is bumping clearance.

Why jerk given by cross bar.

4:high salinity alarm come what to do (I said throttle jacket water, sea water flw) he again
said sb shi h wt to do?

5:test kon se kroge injector mai (leak hua to kya krega, I said lap krunga between needle and
nozzle)

6:hydraulic jack overhaul leak is happening wt to do(I said back up o-rings change) he said
kuch b nai onboard wt to do, I said spare piston I will use then.

Every answer cross question comes.

Result:coc

Anil bhatt sir, one of best guy

FN – 3

Type of ship

Inclining experiment full

Tank Air vent regulation sounding regulation

Why international shore coupling where it is kept

Types of fire fighting system

(I said have only co2 nd foam for deck willing to ask about sprinkler then skkiped,)

What is low pressure co2 system difference in both

Location nd leak alarm nd why?

Foam which type name expension ratio whht is in your ship

Some forgot

Fn – 5

Types of induction motor plenty cross question

Where u use synchronous motor in ship,

Where u used on ship

Advantages and disadvantages

- Why air gap wht happen if increase or decrease if not there wht happen

Space heater weheter it keep on whn generator, if off how it get off,

What is difference between motor on deck nd motor in engine

What is earth neutral

Why shaft earthing required how it work many cross question forgot will post later

23/3/2022

Internal: Purna Majhi

External : Anil Bhatt

Motor,mep

4b

Ur engine type

Difference between MC and MC-C

Difference between chain drive and gear drive

Types of lubrication

Elasto hydrodynamic lubrication, application

How Top end bearing lubricated

Alpha lubricator working

Vit ,super vit

Mep

Pipe fabrication

Priming and foaming in boiler

Chain tightening procedure

FWG maintenance

FWG condenser tube leak detection and repair

Phosphate test need

Hydrazine test need

Steam trap

Anchor windlass brake test

Motor

Mep