Kathrein Catalogue2019 PDF

MOBILE
COMMUNICATION
CATALOGUE 2019
Mobile Communication
Base Station Antennas and Antenna Line Products
1919–2019
Passion to connect.
Who we are
and what we stand for
Kathrein is a specialist for reliable, high-quality The business covers a broad spectrum: from mobile
communication technologies. communication, RFID and special solutions, to satellite
reception and broadcast technology, to transmission
The company is driving innovation and technology in and reception systems in vehicles.
today’s connected world. Its ability to provide solutions
and services enables people all over the world to As a hidden champion and family-owned enterprise,
communicate, access information and use media, Kathrein has been working on the technologies of tomorrow
whether at home, at the office or on the road. since 1919. The company takes pride in its dedicated
employees and passion for customers and quality.
Our Solutions
BUSINESS MOBILE SPECIAL

SAT BROADCAST AUTOMOTIVE
SOLUTIONS COMMUNICATION COMMUNICATION
Find out more about us at www.kathrein.com
Catalogue Issue 01/2019

All data published in previous catalogue issues hereby become invalid.
We reserve the right to make alterations in accordance with the requirements of our customers.
For up-to-date or additional data please check the latest data sheets on our website: www.kathrein.com
Please also visit our website for new product releases which are not part of this catalogue.
Please also see additional information on inside back cover.
Our quality assurance system and our Our products are compliant to the EU
environmental management system apply Directive RoHS as well as to other
to the entire company and are certified RoHS environmentally relevant regulations
by TÜV according to EN ISO 9001 and (e.g. REACH).
EN ISO 14001.
Base Station Antennas LB (Lowband) ≤ 960 MHz
HB (Highband) > 960 MHz
1 LB
2 Ports
XPol 2 Ports 1 HB
1 LB | 1 HB
2 LB
1 LB | 1 HB
4 Ports
4 Ports 2 HB
2 x 3.5 GHz
1 LB | 2 HB
6 Ports
6 Ports 2 LB | 1 HB
3 HB
1 LB | 3 HB
8 Ports
8 Ports 2 LB | 2 HB
4 HB
10 Ports
1 LB | 4 HB
10 Ports 2 LB | 3 HB
12 Ports
14 + 16 Ports
Small Cell
Small Cell and Special Design
VPol VPol
Omni
Omni
RET RCU, Control Devices, Site Sharing, Accessories

RET
Electr. Acc.
Electrical Accessories Splitters, Tappers

Mounting
Mounting Accessories Hardware, Tools, Protection Caps

Summary of Antenna Types, RET-Products
and Accessories
The articles are listed by type number in numerical order. New or changed product.
Type No. Page Type No. Page Type No. Page Type No. Page
731... 742263 273 80010652 55 800108..
731651 260 742317 273 80010656 58 + 59 80010817 39
80010664 44 + 45 80010825 118 – 120
732... 782... 80010665V01 46 + 47 80010826 121 + 122
732327 266 78211293 286 80010666V01 48 + 49 80010828V01 229
78211297 286 80010678 21 80010843 220
734... 80010681 23 80010846 234
734360 280 800101.. 80010682 52 80010864 76 + 77
734361 280 80010123V03 50 + 51 80010691V01 72 + 73 80010865 78 + 79
734362 280 80010692V01 74 + 75 80010866 80 + 81
734363 280 800102.. 80010697 82 + 83 80010867 108 + 109
734364 280 80010235 224 80010698 84 + 85 80010868 110 + 111
734365 280 80010291V02 68 + 69 80010699 86 + 87 80010869 112 + 113
80010292V03 70 + 71 80010875 142 + 143
736... 80010887 31
736347 233 800103.. 800107.. 80010888 32
80010305V02 19 80010713 221 80010889 33
737... 80010306V02 20 80010714 221 80010891 144 – 146
737978 267 80010368 227 80010715 40 + 41 80010898 174 – 176
80010378 26 80010728 132 + 133
738... 80010745 201
738192 232 80010746 201 800109..
738546 260 800104.. 80010753 217 80010901 34 + 35
738908 282 80010431 235 80010761 22 80010902 36 + 37
80010456V02 18 80010767 102 + 103 80010922 60 + 61
742... 80010768 104 + 105 80010964 123 – 125
742033 273 800106.. 80010769 106 + 107 80010965 126 – 128
742034 273 80010606V01 56 + 57 80010775 223 80010966 129 – 131
742113 276 80010621V02 24 80010776 223 80010991 180 – 183
742192V02 226 80010647V01 38 80010798 162 – 164 80010992 184 – 187
742226V01 42 + 43 80010651 25 80010799 168 – 170
4
Summary of Antenna Types, RET-Products
and Accessories
80011... 840… 85010016 271 86010012 245
80011867 114 + 115 84010555 204 + 205 85010017 271 86010013 245
80011868 116 + 117 84010556 204 + 205 85010058 273 86010014 245
80011877 190 + 191 84010557 206 + 207 85010059 273 86010015 245
80011878 192 + 193 84010558 206 + 207 85010060 275 86010029 245
80011891 139 – 141 84010564 218 + 219 85010061 275 86010030 251
80011898 171 – 173 84010601 211 – 213 85010075 277 86010031 252
80011965 153 – 155 84010602 211 – 213 85010076 277 86010032 245
84010603 208 – 210 85010080 245 86010033 245
80020... 84010604 208 – 210 85010087 278 86010046 244
80020100 214 84010793 202 + 203 85010096 263 86010054 245
80020125 222 84010794 202 + 203 85010097 264 86010101 255
80020126 200 840370799 158 – 161 85010098 272 86010103 255
80020448 228 84040600 281 85010099 270 86010105 255
80020622 53 + 54 84040601 281 85010101 265 86010129 283
80020711 216 84040602 281 85010102 274 86010131 254
80020727 88 + 89 84040603 281 85010103 279 86010148V01 240
80020799 165 – 167 85010104 275 86010150 256
80020872 93 – 95 845… 85010108 279 86010151 256
80020892 150 – 152 84510864 64 + 65 85010110 269 86010152 256
80020899 177 – 179 84510865 66 + 67 85010111 262 86010153V01 241
84510891 136 – 138 85010205 215 86010154 246
80040... 84510892 147 – 149 85010212 260 86010155 247
80040064 96 – 98 86010156 242
80040066 99 – 101 850… 860… 86010157 284 + 285
85010002 260 86010002 250 86010158 243
80044... 85010003 260 86010007 245 86010162 248
800442001 194 – 196 85010004 286 86010008 245 86010163 249
85010008 268 86010009 245
816... 85010014 271 86010010 245
81610014 286 85010015 271 86010011 245
5
Colour Coding and
Antenna Symbols
According to AISG, the frequencies shall be marked like shown in the following table.
The upper edge of the frequency range is used to select the colour code.
Frequency Range / MHz Frequency Range / MHz Colour Colour Code

Defined by AISG Examples Abbreviation
380–1000 617–746 Red R
698–960 Red R
698–894 Red R
790–960 Red R
1001–1700 1427–1518 Green G
1701–2300 1350–2200 Blue B
1710–1880 Blue B
1710–2180 Blue B
1920–2170 Blue B
2301–3000 2490–2690 Yellow Y
1695–2690 Yellow Y
1427–2690 Yellow Y
3001–5000 3300–3800 Purple P
3550–4200 Purple P
5001–6000 5150–5925 Orange O
In line with this, we have invented a system in order to better illustrate the physical design of our antennas.
Based on the AISG colour coding, every antenna system is displayed corresponding to its frequency range.
Each system is additionally marked by its colour code abbreviation as well as an identification number
(e.g. “R1” for the first lowband system) called “Array ID”. For multi-array antennas, also the position marking
is indicated as stipulated by AISG (“left” / “right” / “center”).
The respective symbols are displayed on each type index of panel antennas in the catalogue.
In case an ultra-broadband dipole array is used for two or three independent system, internal filters can be
used in order to divide the bands. Those filters are illustrated by the following symbols:
1. Filter 2. Filter
Lowband Highband 1
e.g. 790–862 / 880–960 MHz 1710–1880 / 1920–2170 MHz

or
698–803 / 824–960 MHz
3. Filter 4. Filter
Highband 2 L-Band
1710–2170 / 2490–2690 MHz 1427–1518 / 1695–2180 MHz
6
Colour Coding and
Antenna Symbols
Some examples shall demonstrate the symbolic antenna illustration:

1. 2-Port Antenna 2. 4-Port Antenna
1 Lowband Array 1 Lowband / 1 Highband Array

interleaved
e.g. 698–960 or 790–960 MHz
e.g. 698–960 / 1710–2690 or
790–960 / 1710–2690 MHz
Y1
R1 R1
3 Highbands side-by-side 1 Lowband Array interleaved

(“multi-array”) with 2 Highband Arrays,
Highband stacked
e.g. 3 x 1710–2690 MHz Y2
e.g. 698–960 /
2 x 1710–2690 MHz
Y1 Y2 Y3 Y1
Left Center Right R1

B2
Y1
2 Highbands filtered 1 Lowband interleaved with
2 filtered Highbands
e.g. 1710–1880 /
1x 1x
1920–2170 MHz e.g. 790–960 / 1710–2170 /
2490–2690 MHz
B1
B1 R1
7
Antenna Symbols
Configuration Type A Configuration Type B Configuration Type C

80010305V02 80010378 80010621V02
80010306V02 80010606V01 80010651
80010456V02 80010656
80010678
80010681
80010761
R1 B1 Y1
Configuration Type D Configuration Type E Configuration Type F
R2
80010887 80010647V01 80010652
80010888 80010817 80010682
80010889 80010901 80020622
80010902
1x
R1 R2 Y1 Y2
R1 Left Right Left Right
Configuration Type J Configuration Type K Configuration Type L

80020727 Y1 Y2
80010728 742226V01
80010123V03
2x
Y1 Y2 Y3 B1 B2 B1
Left Center Right Left Right R1
Configuration Type M Configuration Type N Configuration Type P

80010664 R2
80010697 80010291V02
80010665V01 80010698 80010292V03
80010666V01 80010699
80010715
1x
80010753 B2
Y1 B1 B1
R1 R1 R1
Configuration Type R Configuration Type S Configuration Type T

80010691V01 80010864 80010825
80010692V01 80010865 80010826
80010866 80040064
80040066
Y2
Y1 Y2 B1 B2
Y1 R1 R1 R2
R1 Left Right Left Right
8
Antenna Symbols
Configuration Type W Configuration Type X Configuration Type Y
R2
80010767 80010891 80010875
80010768 80011891 Y1 Y2
80010769 80020892
R1
80010867
1x 2x
80010868 R1
Y2 Y4
80010869
80011867
80011868
Y1 Y2 Y1 Y3 B1 B2
R1 R1 R1
Left Right Left Right Left Right
Configuration Type Z Configuration Type AA Configuration Type AB
R2
80010798 80020872 80010964
80010799 80010965
80010898 80010966
R1
80011898
1x R1
Y2 Y4 80020799 Y3
80020899
Y1 Y3 Y1 Y2 Y1 Y2
R1 R1 R1 R2
Configuration Type AG Configuration Type AH Configuration Type AI

80010991 84510892 80011965
80010992
840370799
Y2 Y4 Y1 Y4
Y1 Y3 Y1 G1 Y2
R1 R2 Y2 R1 Y3 R1 R2
Left Right Left Center Right Left Center Right
Configuration Type AJ Configuration Type AK Configuration Type AL
R2
80011877 84510864 84510891
Y1 Y2 80011878 84510865
1x
2x
Y2 Y4
B2
1x
B1 G1
R1 Y1 R1 Y2 Y1 R1 Y3
Left Right Left Center Right Left Center Right
Configuration Type AM Configuration Type AN

R2
800442001 80010922
Y1 Y3
1x
2x
B1 Y2 B2
R1 R3 P1 P2
Left Center Right Left Right
9
Antenna Designs:
Antenna Families / RET-system
Distinguishing features
Design Compact size and elegant design are the distinguishing features of Kathrein’s
antenna families.
Radome The radomes cover the internal antenna components. The fiberglass material
guarantees optimum performance with regards to stability, strength, UV resis-
tance, painting and weather protection. The colour of the radome of outdoor
panel antennas is similar to RAL 7035.
Environmental influences Kathrein antenna designs are based on fundamental engineering knowledge
and also on our decades of practical experience, during which the various
constructions and materials used have proved their outstanding reliability.
Environmental conditions Kathrein cellular antennas are designed to operate under the environmental
conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regards to the following items:
– Low temperature: −55 °C
– High temperature (dry): +60 °C
Environmental tests Kathrein antennas are designed according to the specifications as defined
in ETS 300 019-2-4. The homogenous design of Kathreins antenna families
uses identical m odules and materials. Extensive tests have been p erformed
on typical samples and modules. The vibration test has been adapted r elating
to frequency and a cceleration to the conditions of mast mounted antennas.
Impedance Standard Impedance for all products is 50 Ω unless otherwise stated.
Great variety of According to the antenna type selected, customers can choose from d ifferent
half-power beam width, half-power beam widths, gain values and electrical downtilts for panel
gain values, antennas. Downtilts are either fixed or adjustable and controlled by remote
electrical downtilt electrical tilt system (RET).
Low intermodulation With many years of experience in the construction of antennas and intensive
products (typ. <−153 dBc) research into the effects of intermodulation, we offer optimized material and
technology used for antennas (the given value refers to 3rd order p roducts
measured with 2 carriers of 20 W each).
Excellent tracking Tracking states the symmetry between the +45° and −45° polarized horizontal
pattern. Bad tracking values lead to interferences in the network and reduced
diversity performance. Kathreins special Tracking compensation reduces the
average value measured at ±60° to < 2–3 dB.
10
Antenna Designs:
Antenna Families / RET-system
Distinguishing features
Multi-array design Besides standard single array antennas, Kathrein designs antennas p roviding
multiple antenna arrays in one radome. These multi-array antennas do not
only supply a future-proof multiplicity of diverse frequency bands for various
technologies, but are also well-prepared for different MIMO-applications. The
Kathrein portfolio contains a high variety of design solutions like interleaved
and side-by-side antenna types or combinations of both as well as filter
realizations.
Multi-functional Depending on the type, the antennas are equipped with up to 2 attachment
installation hardware points. Panels can be wall-mounted without any additional hardware. For
mast-mounting, brackets and mechanical downtilt kits are available. To assist
the installation technicians in aligning the panels, an azimuth adjustment tool
can be supplied (see Mechanical Accessories).
MTBF Statement Traditionally, passive components like antennas cannot be well calculated
due to the lack of a sufficient number of components in the MTBF library.
Unfortunately, this constraint results in a very inaccurate calculation. Thus,
such results are technically questionable and unrealistic.
In essence, antennas are made out of mechnical parts that do not show any
failure r ates. Only available failure rates can be calculated into an MTBF value.
Consequently such components cannot be listed in any MTBF library.
Remote Electrical Tilt Kathrein hereby states that RET devices, as far as the functionality and
System AISG Compliancy features are described within the AISG / 3GPP standard, are compliant with
the standard.
NGMN-P-BASTA All antennas which are measured according to the specifications given in
NGMN-P-BASTA White Paper Version 9.6 are clearly marked in the data sheet.
Kathrein is changing over more and more data sheets to NGMN-P-BASTA. The
latest data sheets can be found on our website.
RET RFID Functionality Kathrein‘s latest Remote Control Unit (RCU) is equipped with an internal RFID
reader. Most of our antennas are equipped with RFID tags in their spindles.
With this, all relevant antenna data can automatically be read out by the RCU.
Further information as well as an up-to-date list of the antennas can be found
on our website. The according data sheets are marked by an RFID sign.
4.3-10 Connectors Partly, Kathrein’s latest mobile communication antennas and antenna line
products are equipped with 4.3-10 connectors.
The advantages of this connector are:
• Reduced dimensions on the bottom plate for more installation space
• Improved PIM stability and performance
• Easier installation, lower tightening torque
The universal 4.3-10 jack can be used with 3 different connector types (screw
type, push-pull type and hand screw type).
11
Downtilting of Antennas with external RCU:
Downtilt Possibilities
Mechanical downtilt For further technical information please see “Mechanical Accessories”,
page 259.
Electrical downtilt Description of the adjustment mechanism (protective cap removed):
1
2
2
➀ Twist protection. ➀ Thread for fixing the pro To set the downtilt angle ex-
➁ Downtilt spindle with integ- tective cap or the RCU actly, you must look horizon-
rated scale. (Remote Control Unit). tally at the scale. The lower
➁ Gearwheel for RCU power edge of the gearwheel must
drive. be used for alignment.
Manual adjustment procedure:
0° – max.°
General Instructions for Feederline Installation

for Dual-band Antennas 0° – max.°
Remove the protective cap Set downtilt angle by rotating Screw on the twist protection
and the
Please note: In order not twist protection
to damage theplease
the interfaces, gearwheel.
make sure that only theand the
right protective
tools cap again.
are used.
completely.
Tighten the feederline connector interfaces solely by using a common torque-wrench with a suitable wrench
Remote Electricalwidth.
Tilt (RET) For further technical information please see “RET”, pages 238 and 239.
Description of bottom end cap
Description (exemplary
of bottom end cappicture):
(exemplary picture):
Adjustment mechanism
(protective cap removed)
Ventilation hole
Spindle with tilting scale
Colour coding:
Correlation of each RF input to:
– the corresponding adjustment mechanism
7-16 female (long neck) – the frequency range
– the polarization
12
Dimensions of Panels
Antenna dimensions and detailed connector position can be found on our current data sheets.
Please refer to the information on our latest data sheets which are available on our website:
www.kathrein.com
→ Mobile Communication
An example is shown below of how the antenna dimensions are displayed on our data sheets:
Front view Bottom view

164 | 6.5 *
R2 R2
L 4 L 3
229 | 9.0 *
880 - 960 880 - 960
Y1 Y1 R1 R1 Y2 Y2
2056 | 80.9
1999 | 78.7
1818 | 71.6
L 6 L 5 L 2 L 1 R 8 R 7
140 | 5.5
1695-2690 1695-2690 698 - 862 698 - 862 1427-2690 1427-2690
97 | 3.8
131 | 5.2
221 | 8.7
311 | 12.2
378 | 14.9 *
1)
* Dimensions refer to radome
2)
3)
1) 22 | 0.9
2) 150 | 5.9
3) ∅ 11 | 0.4
All dimensions in mm | inches
13
Catalogue 2019 —>
Alterations to the Catalogue of 2018
Not longer in the catalogue 2019 Comments / Replacement

Small Cell
80010711 80020711
Electrical Accessories
86010130 86010131
Please note: New type numbers in the catalogue 2019 are shown and coloured in the respective register of the different
antenna families.
All phased-out types will be available on request until end of 2019 unless otherwise announced.
According i nformation can be found on our website.
All phase-out dates which were already communicated during 2018 remain valid. This list is a general overview
which shows the differences in the 2019 catalogue as compared to the 2018 version.
14
Kathrein Antennas
Product Description (Type)
8-Port Antenna 2LB/2HB 1.4m 65° | 698–803 14dBi | 824–960 14.5dBi | 2x1695–2690 18dBi
Number
of Ports
Frequency
Range(s)
Length
Horizontal
Half-power Beam Width(s)
Frequency Range
and Gain Value
15
16
Summary – Directional Antennas
2 Ports
Dual Polarization ±45°
2 Ports
Type Type No. Height Connector female, Page 1)
[mm] type and position
1 x Lowband
2-Port Antenna 790–960 30° 20.5dBi 0.5°–10°T 80010456V02 2254 7-16, rearside 18 A
2-Port Antenna 790–960 65° 17.5dBi 0°–8°T 80010305V02 2254 7-16, rearside 19 A
2-Port Antenna 790–960 65° 17.5dBi 0.5°–9.5°T 80010306V02 2574 7-16, bottom 20 A
1 x Highband
2-Port Antenna 1695–2690 35° 19.5dBi 2°–10°T 80010678 1272 7-16, bottom 21 C
2-Port Antenna 1710–2690 65° 9.5dBi 0°T 80020711 155 4.3-10, bottom or top 216 C
2-Port Antenna 1710–2690 65° 12dBi 4°T 80010761 278 7-16, bottom 22 C
2-Port Antenna 1710–2690 65° 16.5dBi 0°–12°T 80010681 851 7-16, bottom 23 C
2-Port Antenna 1710–2690 65° 18dBi 2°–14°T ESLS 80010621V02 1452 7-16, bottom 24 C
2-Port Antenna 1710–2690 65° 19dBi 0°–6°T 80010651 1670 7-16, bottom 25 C
2-Port Antenna 1710–2200 62° 21.2dBi 0°–6°T HE 80010378 2548 7-16, bottom 26 B
1 x Lowband | 1 x Highband
2-Port Antenna 790–960 C 65° 8dBi 0°T 80010753 334 7-16, bottom 217 M
1710–2690 65° 9dBi 0°T
New or changed product
1) Configuration Types – further details on page 6–9.
Type A Type B Type C Type M
Abbreviations:
Y1 ESLS: Enhanced Side Lobe Suppression (above or below horizon)
R1 B1 Y1 R1 HE: High Efficiency (Antennas with high gain compared to length)
C: Integrated Combiner
17
2-Port Antenna R1
Frequency Range 790–960
HPBW 30°
2-Port Antenna LB 2.3m 30° | 790-960 20.5dBi

Type No. 80010456V02
Lowband R1
790–960
Frequency range MHz 790 – 862 824 – 894 880 – 960
Polarization ° +45, −45 +45, −45 +45, −45
Gain at 0° T dBi 2 x 20.0 2 x 20.2 2 x 20.5
Horizontal Pattern:
Half-power beam width ° 33 32 30
Front-to-back ratio, copolar dB > 28 > 29 > 30
Cross polar ratio
Maindirection 0° dB Typically: 25 Typically: 23 Typically: 20
Tracking, Avg. dB 2.5
Squint ° ±2.0
Vertical Pattern:
Half-power beam width ° 9.1 8.8 8.5
Electrical tilt ° 0.5 – 10, continuously adjustable
Sidelobe suppression for first °T 0.5 ... 5 ... 10 0.5 ... 5 ... 10 0.5 ... 5 ... 10
sidelobe above main beam dB > 16 ... 13 ... 13 > 18 ... 18 ... 17 > 18 ... 16 ... 15
Impedance Ω 50
VSWR < 1.5
Isolation, between ports dB > 30
Intermodulation IM3 dBc < −150 (2 x 43 dBm carrier)
Max. power per input W 500 (at 50 °C ambient temperature)
Mechanical specifications
Input 2 x 7-16 female

Connector position Rearside
Adjustment 1x, Position bottom
mechanism continuously adjustable
Wind load (at Rated N | lbf Frontal: 1415 | 318
Wind Speed: 150 km/h) Maximal: 1555 | 350
Max. wind velocity km/h 200
mph 124
Height/width/depth mm 2254 / 576 / 99
inches 88.7 / 22.7 / 3.9
Category of mounting hardware H (Heavy)
Weight kg 22 / 24 (clamps incl.)
lb 28.5 / 52.9 (clamps incl.)
Packing size mm 2500 x 600 x 150
inches 98.4 x 23.6 x 5.9
Scope of supply Panel and 2 units of clamps
for 42– 115 mm |
1.7– 4.5 inches diameter
18 For more information about additional mounting accessories please refer to page 259
2-Port Antenna R1
HPBW 65°
2 Ports
2-Port Antenna LB 2.3m 65° | 790–960 17.5dBi
Type No. 80010305V02
Lowband R1
790–960
Polarization ° +45, −45 +45, −45 +45, −45
Average gain dBi 16.8 ... 17.0 ... 16.7 16.9 ... 17.1 ... 16.9 17.2 ... 17.4 ... 17.0
Tilt ° 0 ... 4 ... 8 0 ... 4 ... 8 0 ... 4 ... 8
Horizontal Pattern:
Cross polar ratio
Sector ±60° Typically: > 10 Typically: > 10 Typically: > 10
Squint ° ±2.5
Vertical Pattern:
Electrical tilt ° 0 – 8, continuously adjustable
Sidelobe suppression for first °T 0 ... 2 ... 4 ... 8 0 ... 2 ... 4 ... 8 0 ... 2 ... 4 ... 8
sidelobe above main beam dB 18 ... 18 ... 18 ... 16 18 ... 18 ... 18 ... 16 20 ... 18 ... 17 ... 15
Impedance Ω 50
VSWR < 1.5
Max. effective power per port 400 (at 50 °C ambient temperature)
W
Max. effective power for the antenna 800 (at 50 °C ambient temperature)

mph 124
inches 88.7 / 10.2 / 3.9
Category of mounting hardware M (Medium)
Weight kg 11.5 / 13.5 (clamps incl.)
inches 99.8 x 10.7 x 3.9
for 42– 115 mm |
For more information about additional mounting accessories please refer to page 259 19
2-Port Antenna R1
HPBW 65°
2-Port Antenna LB 2.6m 65° | 790–960 17.5dBi

Type No. 80010306V02
Lowband R1
790–960
Frequency Range MHz 790 – 862 824 – 894 880 – 960
Gain at mid Tilt dBi 17.1 17.2 17.4
Gain over all Tilts dBi 17.1 ± 0.4 17.2 ± 0.2 17.4 ± 0.2
Horizontal Pattern:
Azimuth Beamwidth ° 69 ± 1.7 68 ± 1.6 65 ± 2.5
Front-to-Back Ratio,
dB > 22 > 22 > 22
Total Power, ± 30°
Cross Polar Discrimination
dB > 21 > 22 > 23
at Boresight
dB > 12.5 > 12.5 > 11.0
over Sector
Azimuth Beam
dB < 1.0 < 1.0 < 1.5
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth ° 7.9 ± 0.4 7.8 ± 0.3 7.5 ± 0.4
Electrical Downtilt
° 0.5 – 9.5
continuously adjustable
Tilt Accuracy ° < 0.3 < 0.3 < 0.3
First Upper Side Lobe
dB > 17 > 18 > 18
Suppression
Cross Polar Isolation dB > 30
Max. Effective Power W 400 (at 50 °C ambient temperature)
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
Electrical specifications, all systems Mechanical specifications

Impedance Ω 50 Input 2 x 7-16 female long neck
VSWR < 1.5 Connector Position bottom
Return Loss dB > 14 Adjustment Mechanism 1x, Position bottom
Passive Intermodulation dBc < −150 (2 x 43 dBm carrier) continuously adjustable
Polarization ° +45, −45 Wind load (at Rated N | lbf Frontal: 895 | 201
Max. Effective Power 800 (at 50 °C ambient Wind Speed: 150 km/h) Maximal: 980 | 220
W temperature) Max. Wind Velocity km/h 200
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements. mph 124
Height / Width / Depth mm 2574 / 259 / 99
inches 101.3 / 10.2 / 3.9
Category of H (Heavy)
Mounting Hardware
Packing Size mm 2876 / 272 / 127
inches 113.2 / 10.7 / 5.0
Scope of Supply Panel and 2 units of clamps
for 42 –115 mm |
2-Port Antenna Y1
HPBW 35°
2 Ports
2-Port Antenna HB 1.3m 35° | 1695–2690 19.5dBi
Type No. 80010678
Highband Y1, connector 1– 2
1695–2690
Frequency Range MHz 1695 – 1880 1850 – 1990 1920 – 2170 2300 – 2400 2500 – 2690
Gain at mid Tilt dBi 18.6 19.2 19.4 19.8 19.6
Gain over all Tilts dBi 18.5 ± 0.4 19.1 ± 0.3 19.4 ± 0.3 19.7 ± 0.5 19.5 ± 0.9
Horizontal Pattern:
Azimuth Beamwidth ° 43 ± 3.1 39 ± 1.7 38 ± 1.3 36 ± 0.7 33 ± 0.8
dB > 20 > 21 > 23 > 25 > 23
dB > 22 > 23 > 21 > 20 > 11
at Boresight
dB > 15.0 > 16.5 > 16.5 > 13.0 > 7.5
over Sector
Vertical Pattern:
Elevation Beamwidth ° 7.8 ± 0.5 7.3 ± 0.2 7.1 ± 0.3 6.4 ± 0.3 5.8 ± 0.4
Electrical Downtilt
° 2.0 – 10.0
Tilt Accuracy ° < 0.5 < 0.2 < 0.2 < 0.2 < 0.2
dB > 19 > 21 > 22 > 20 > 18
Suppression
Upper Side Lobe
Suppression, 20° Sector dB > 15 > 19 > 19 > 18 > 14
above Main Beam
per Port

Impedance Ω 50 Input 2 x 7-16 female
Interband Isolation dB > 28 continuously adjustable
Passive Intermodulation dBc < −150 (2 x 43 dBm carrier) Wind load (at Rated N | lbf Frontal: 410 | 92
Polarization ° +45, −45 Wind Speed: 150 km/h) Maximal: 450 | 101
Max. Effective Power 400 (at 50 °C ambient Max. Wind Velocity km/h 200
W temperature) mph 124
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements. Height / Width / Depth mm 1272 / 235 / 69
inches 50.1 / 9.3 / 2.7
Category of M (Medium)
Mounting Hardware
inches 63.7 / 10.1 / 4.1
for 42 –115 mm |
2-Port Antenna Y1
HPBW 65°
2-Port Antenna HB 0.3m 65° | 1710–2690 12dBi

Type No. 80010761
Highband Y1
1710–2690
Frequency range MHz 1710 – 1990 1920 – 2200 2200 – 2490 2490 – 2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 11 11.5 12.2 12.7
Horizontal Pattern:
Half-power beam width ° 67 65 60 58
Front-to-back ratio, copolar dB > 30 > 28 > 28 > 27
Cross polar ratio
Maindirection 0° dB Typically: > 20 Typically: > 20 Typically: > 20 Typically: > 20
Sector ±60° >8 >8 >8 >8
Vertical Pattern:
Electrical tilt ° 3, fixed 3, fixed 4, fixed 4, fixed
Impedance Ω 50
VSWR < 1.5

Connector position Bottom
mph 124
inches 10.9 / 6.1 / 2.7
Category of mounting hardware L (Light)
Weight kg 1.8 (tension bands incl.)
lb 4.0 (tension bands incl.)
inches 14.8 x 6.8 x 39.1
Scope of supply Panel and 1 unit of tension
bands for 45 – 125 mm |
1.8 – 4.9 inches diameter
2-Port Antenna Y1
HPBW 65°
2 Ports
Type No. 80010681
Highband Y1
1710–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain at 0° tilt dBi 15.5 16.3 16.7 16.7
Horizontal Pattern:
Front-to-back ratio (180°±30°) dB > 25 > 25 > 23 > 23
Cross polar ratio 0° Typically: 25 Typically: 28 Typically: 28 Typically: 28
dB
Sector ±60° > 10 >8 >8 > 11
Vertical Pattern:
Half-power beam width ° 10.8 9.9 8.8 8.4
Sidelobe suppression for first °T 0 ... 6 ... 12 0 ... 6 ... 12 0 ... 6 ... 12 0 ... 6 ... 12
sidelobe above main beam dB ≥ 12 ... 13 ... 15 ≥ 13 ... 14 ... 15 ≥ 13 ... 14 ... 16 ≥ 15 ... 15 ... 17
Impedance Ω 50
VSWR < 1.5

mph 124
inches 33.5 / 6.1 / 2.8
Category of mounting hardware L (Light)
Weight kg 5 / 5.2 (clamps incl.)
inches 45.1 x 6.8 x 3.6
Scope of supply Panel and 1 unit of tension
bands for 45 – 125 mm |
1.8 – 4.9 inches diameter
2-Port Antenna Y1
HPBW 65°
2-Port Antenna HB 1.5 m 65° | 1710–2690 18dBi ESLS

Type No. 80010621V02
Highband Y1
1710–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 17.4 ... 17.6 ... 17.5 17.9 ... 18.2 ... 18.1 18.4 ... 18.5 ... 18.5 18.5 ... 19.0 ... 18.5
Tilt ° 2 ... 8 ... 14 2 ... 8 ... 14 2 ... 8 ... 14 2 ... 8 ... 14
Horizontal Pattern:
dB
Sector ±60° > 10 > 10 > 10 > 10
Vertical Pattern:
Half-power beam width °° 6.7 6.0 5.3 5.0
Electrical tilt 2 – 14, continuously adjustable
Sidelobe suppression °T 2 ... 8 ... 14 2 ... 8 ... 14 2 ... 8 ... 14 2 ... 8 ... 14
– for first sidelobe above main beam dB ≥ 18 ... 18 ... 18 ≥ 18 ... 18 ... 18 ≥ 18 ... 18 ... 18 ≥ 18 ... 18 ... 18
– within 0°–20° sector above horizon dB ≥ 17 ... 17 ... 16 ≥ 17 ... 17 ... 16 ≥ 17 ... 17 ... 16 ≥ 17 ... 17 ... 14
Impedance Ω 50
VSWR < 1.5
Intermodulation IM3 dBc < –150 (2 x 43 dBm carrier)
W

mph 124
inches 57.2 / 6.0 / 2.8
inches 7.9 x 6.8 x 3.6
for 42– 115 mm |
2-Port Antenna Y1
HPBW 65°
2 Ports
2-Port Antenna HB 1.7m 65° | 1710–2690 19dBi
Type No. 80010651
Highband Y1
1710–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain at 0° tilt dB 18.5 19.0 19.4 19.5
Horizontal Pattern:
dB
Sector ±60° > 10 > 10 > 10 > 10
Squint ° ±3
Vertical Pattern:
Sidelobe supression for first °T 0 ... 3 ... 6 0 ... 3 ... 6 0 ... 3 ... 6 0 ... 3 ... 6
Impedance Ω 50
VSWR < 1.5

mph 124
inches 65.7 / 6.1 / 2.8
inches 76.1 x 6.8 x 3.6
for 42– 115 mm |
2-Port Antenna B1
HPBW 62°

Type No. 80010378
Highband B1
1710–2200
Polarization ° +45, −45 +45, −45 +45, −45
Gain dBi 2 x 20.6 2 x 21.1 2 x 21.2
Horizontal Pattern:
Front-to-back ratio (180°±30°) dB > 30 > 28 > 28
Cross polar ratio 0° 25 23 23
dB
Sector ±60° > 10 > 10 > 10
Squint ° ±2.5
Vertical Pattern:
Sidelobe supression for first °T 0 ... 3 ... 6 0 ... 3 ... 6 0 ... 3 ... 6
sidelobe above main beam dB 18 ... 18 ... 17 18 ... 17 ... 17 17 ... 17 ... 17
Null-fill at 0° tilt dB 20 20 20
Impedance Ω 50
VSWR < 1.5

mph 124
inches 100.3 / 6.1 / 3.5
inches 110.9 x 6.8 x 4.4
for 42– 115 mm |
27
2 Ports
4 Ports
2 x Lowband
4-Port Antenna 698–862 65° 14.5dBi 2°–16°T 80010887 1459 4.3-10, bottom 31 D
880–960 65° 15dBi 2°–16°T
880–960 65° 16dBi 2°–12°T
880–960 65° 17dBi 1°–10°T
4-Port Antenna 698–960 65° 15.5dBi 2°–12°T 80010901 1999 4.3-10, bottom 34 + E
698–960 65° 15.5dBi 2°–12°T 35
4-Port Antenna 698–960 65° 16.5dBi 1°–10°T 80010902 2438 4.3-10, bottom 36 + E
698–960 65° 16.5dBi 1°–10°T 37
4-Port Antenna 790–960 65° 17.5dBi 0°–8°T 80010647V01 2254 7-16, rearside 38 E
790–960 65° 17.5dBi 0°–8°T
4-Port Antenna 790–960 90° 16dBi 0°–8°T 80010817 2631 7-16, bottom 39 E
790–960 90° 16dBi 0°–8°T
Type D Type E
R2
1x
R1 R2
R1 Left Right
28
4 Ports
4 Ports
4-Port Antenna 698–960 65° 10.5dBi 2°T 80010715 603 4.3-10, bottom 40 + M
1695–2690 65° 13.5dBi 2°T 41
4-Port Antenna 790–960 65° 12dBi 0°T 742226V01 579 7-16, bottom or top 42 + L
1710–2170 60° 14dBi 0°T 43
4-Port Antenna 790–960 65° 15dBi 0°–16°T 80010664 1403 7-16, bottom 44 + M
1710–2690 65° 17.5dBi 2°–10°T 45
4-Port Antenna 790–960 65° 16dBi 0°–10°T 80010665V01 1997 7-16, bottom 46 + M
1710–2690 65° 18.5dBi 2°–8°T 47
4-Port Antenna 698–960 65° 17dBi 1.5°–10°T 80010666V01 2622 7-16, bottom 48 + M
1710–2690 65° 18.5dBi 2°–8°T 40
4-Port Antenna 790–960 90° 16.5dBi 0.5°–7°T 80010123V03 2635 7-16, bottom 50 + L
1710–2180 90° 18dBi 0°–6°T 51
Type L Type M
B1 Y1
R1 R1
29
4 Ports
2 x Highband
4-Port Antenna 1710–2690 65° 16.5dBi 0°–12°T 80010682 855 7-16, bottom 52 F
1710–2690 65° 16.5dBi 0°–12°T
4-Port Antenna 1695–2690 65° 18dBi 2°–14°T ESLS 80020622 1471 4.3-10, bottom 53 + F
1695–2690 65° 18dBi 2°–14°T 54
4-Port Antenna 1710–2690 65° 19dBi 0°–10°T 80010652 1668 7-16, bottom 55 F
1710–2690 65° 19dBi 0°–10°T
2 x Highband Special Design
4-Port MicroCell 1695–2690 85° 7.5dBi 0°T 80010843 526 4.3-10, 220 C/C
1695–2690 85° 7.5dBi 0°T bottom and top
4-Port Dual-Beam 1710–2200 45° (–30°) 19.5dBi 0°–10°T 80010606V01 1314 7-16, bottom 56 + B/B
1710–2200 45° (+30°) 19.5dBi 0°–10°T 57
4-Port Dual-Beam 1695–2690 35° (–30°) 19.5dBi 2°–10°T 80010656 1254 7-16, bottom 58 + C/C
1695–2690 35° (+30°) 19.5dBi 2°–10°T 59
2 x 3.5 GHz
4-Port Antenna 3300–3800 65° 17.5dBi 2°–12°T 80010922 970 4.3-10, bottom 60 + AN
3300–3800 65° 17.5dBi 61
Type B Type C Type F AN
Y1 Y2 P1 P2 Abbreviations:
B1 Y1 Left Right Left Right ESLS: Enhanced Side Lobe Suppression
(above or below horizon)
30
4-Port Antenna R1 R2
Frequency Range 698–862 880–960
HPBW 65° 65°
4-Port Antenna 2LB 1.5 m 65° | 698–862 14.5dBi | 880–960 15dBi

Type No. 80010887
Lowbands R1, connector 1– 2 R2, connector 3 –4
4 Ports
698–862 880–960
Horizontal Pattern:
Front-to-Back Ratio, dB > 21 > 24 > 26
Cross Polar Discrimination dB > 20 > 21 > 19
at Boresight
Azimuth Beam dB < 2.5 < 2.0 < 2.5
Vertical Pattern:
Electrical Downtilt ° 2.0 – 16.0 2.0 – 16.0
Tilt Accuracy ° < 0.7 < 0.6 < 0.5
First Upper Side Lobe dB > 14 > 14 > 14
Suppression
Upper Side Lobe
Suppression, 20° Sector dB > 14 > 14 > 15
above Main Beam
Cross Polar Isolation dB > 30 > 30
Port to Port Isolation dB > 28 (R1 // R2) > 28 (R2 // R1)
Max. Effective Power for W 300 (at 50 °C ambient temperature)
Group of Ports 1+3 // 2 + 4
Ports R1 + R2

Impedance Ω 50 Input 4 x 4.3-10 female
Return Loss dB > 14 Adjustment Mechanism FlexRET,
for the Antenna
inches 57.4 / 14.8 / 6.7
Mounting Hardware
inches 63.8 / 15.6 / 8.3
Scope of Supply Panel, FlexRET and
2 units of clamps
for 42 –115 mm |
HPBW 65° 65°
4-Port Antenna 2LB 2.0m 65° | 698–862 15.5 dBi | 880–960 16dBi
Type No. 80010888
698–862 880–960
Horizontal Pattern:
at Boresight
Vertical Pattern:
Tilt Accuracy ° < 0.4 < 0.4 < 0.4
Suppression
Upper Side Lobe
above Main Beam
Ports R1 + R2

for the Antenna
inches 78.7 / 14.9 / 6.5
Category of XH (X-Heavy)
Mounting Hardware
inches 86.6 / 16.2 / 10.0
1 unit of clamps
for 55– 115 mm |
2.2 –4.5 inches diameter
gory of
The “Cate ware”
Hard
Mounting to “XM”
h a n g e
will c 19
during 20
HPBW 65° 65°
4-Port Antenna 2LB 2.4m 65° | 698–862 16.5dBi | 880–960 17dBi

Type No. 80010889
4 Ports
698–862 880–960
Horizontal Pattern:
at Boresight
Azimuth Beam dB < 2.0 < 1.5 < 2.5
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.4 < 0.3
Suppression
Upper Side Lobe
above Main Beam
Ports R1 + R2

for the Antenna
inches 96.0 / 14.9 / 6.5
Mounting Hardware
inches 103.9 / 16.2 / 10.0
Scope of Supply Panel, FlexRET and clamps
for 55– 115 mm |
gory of
The “Cate ware”
Hard
h a n g e
will c 19
during 20
HPBW 65° 65°
4-Port Antenna 2LB 2.0m 65° | 2x698–960 15.5dBi

Type No. 80010901
Left side, lowband R1, connector 1– 2
698–960
Frequency Range MHz 698 – 806 791 – 862 824 – 894 880 – 960
Gain at mid Tilt dBi 14.8 15.4 15.6 15.9
Gain over all Tilts dBi 14.8 ± 0.6 15.4 ± 0.4 15.6 ± 0.2 15.8 ± 0.2
Horizontal Pattern:
Azimuth Beamwidth ° 62 ± 3.9 61 ± 3.2 60 ± 2.7 60 ± 2.1
dB > 22 > 25 > 27 > 25
dB > 8.5 > 10.5 > 11.5 > 11.0
over Sector
Azimuth Beam
dB < 1.5 < 1.0 < 1.0 < 1.5
Vertical Pattern:
Elevation Beamwidth ° 11.9 ± 0.8 11.0 ± 0.8 10.5 ± 0.4 10.2 ± 0.4
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.7 < 0.7 < 0.7 < 0.7
dB > 14 > 14 > 15 > 14
Suppression
Port to Port Isolation dB > 27 (R1 // R2)
per Port
Ports R1
4-Port Antenna
80010901
Right side, lowband R2, connector 3 –4
698–960
4 Ports
Horizontal Pattern:
dB > 22 > 24 > 26 > 27
dB > 8.0 > 12.5 > 13.0 > 13.0
over Sector
Azimuth Beam
dB < 1.5 < 1.5 < 1.0 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.7 < 0.6 < 0.6 < 0.5
dB > 14 > 16 > 16 > 16
Suppression
per Port
Ports R2

for the Antenna
inches 78.7 / 20.0 / 6.9
Mounting Hardware
inches 86.6 / 21.3 / 10.6
for 55– 115 mm |
gory of
The “Cate ware”
Hard
h a n g e
will c 19
during 20
HPBW 65° 65°

Type No. 80010902
698–960
Horizontal Pattern:
dB > 23 > 23 > 24 > 25
dB > 10.0 > 9.5 > 10.0 > 11.5
over Sector
Azimuth Beam
dB < 1.5 < 1.0 < 1.0 < 1.5
Vertical Pattern:
Electrical Downtilt
° 1.0 – 10.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.4
dB > 16 > 17 > 17 > 20
Suppression
per Port
Ports R1
4-Port Antenna
80010902
698–960
4 Ports
Horizontal Pattern:
dB > 22 > 23 > 24 > 26
dB > 9.5 > 10.5 > 10.0 > 11.5
over Sector
Azimuth Beam
dB < 0.5 < 1.0 < 0.5 < 1.5
Vertical Pattern:
Electrical Downtilt
° 1.0 – 10.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.3
dB > 18 > 21 > 20 > 20
Suppression
per Port
Ports R2

for the Antenna
inches 96.0 / 20.0 / 6.9
Mounting Hardware
lb 103.6 / 114.6 (clamps incl.)
inches 103.7 / 21.3 / 10.6
1 unit of clamps
for 55– 115 mm |
HPBW 65° 65°

Type No. 80010647V01
Lowbands R1; R2
790–960
Polarization ° +45, −45 +45, −45 +45, −45
Average gain dBi 16.9 ... 17.1 ... 17.0 17.0 ... 17.2 ... 17.1 17.3 ... 17.4 ... 17.1
Tilt ° 0 ... 4 ... 8 0 ... 4 ... 8 0 ... 4 ... 8
Horizontal Pattern:
Cross polar ratio dB
Maindirection 0° Typically: 25 Typically: 25 Typically: 25
Sector ±60° Typically: > 10 Typically: > 10 Typically: > 10
Squint ° ±2.5
Vertical Pattern:
Sidelobe suppression for first °T 0 ... 3 ... 6 ... 8 0 ... 3 ... 6 ... 8 0 ... 3 ... 6 ... 8
sidelobe above main beam avg. dB 18 ... 18 ... 16 ... 15 18 ... 18 ... 16 ... 15 18 ... 18 ... 16 ... 15
Impedance Ω 50
VSWR < 1.5

Adjustment 2 x, Position bottom
mph 124
inches 88.7 / 22.7 / 3.9
inches 98.4 x 23.6 x 5.9
for 42– 115 mm |
HPBW 90° 90°
4-Port Antenna 2LB 2.6m 90° | 2x790–960 16dBi

Type No. 80010817
Lowbands R1; R2
4 Ports
790–960
Polarization ° +45, −45 +45, −45 +45, −45
Average gain (dBi) dBi 15.4 ... 15.4 ... 15.0 15.7 ... 15.7 ... 15.4 16.0 ... 16.1 ... 15.9
Tilt ° 0 ... 4 ... 8 0 ... 4 ... 8 0 ... 4 ... 8
Horizontal Pattern:
Cross polar ratio 0° Typically: 20 Typically: 20 Typically: 18
dB
Sector ±60° > 10 > 10 > 10
Vertical Pattern:
Sidelobe suppressionfor first °T 0 ... 4 ... 8 0 ... 4 ... 8 0 ... 4 ... 8
sidelobe above main beam dB ≥ 17 ... 17 ... 15 ≥ 17 ... 17 ... 15 ≥ 17 ... 17 ... 15
Impedance Ω 50
VSWR < 1.5
Isolation, between ports dB Intrasystem: > 27, Intersystem: > 27
W

mph 124
inches 103.6 / 14.7 / 4.2
inches 120.0 x 5.2 x 15.3
for 42– 115 mm |
4-Port Antenna R1 Y1
HPBW 65° 65°
4-Port Antenna LB/HB 0.6m 65° | 698–960 10.5dBi | 1695–2690 13.5dBi

Type No. 80010715
Lowband R1, connector 1–2
698–960
Frequency range MHz 698 – 824 MHz 824 – 894 MHz 880 – 960 MHz
Polarization ° +45, −45 +45, −45 +45, −45
Average gain dBi 10.1 10.6 10.7
Horizontal Pattern:
Front-to-back ratio
dB > 23 > 25 > 25
Total power, ± 30°
Cross polar ratio
Sector ±60° >8 > 10 > 10
Vertical Pattern:
Electrical tilt ° 2, fixed
Impedance Ω 50
VSWR < 1.5
Isolation: Intrasystem dB > 27, typ. > 30 > 30 > 28, typ. > 30
Isolation: Intersystem dB > 26, typ. > 30 (R1 // Y1)
W
4-Port Antenna
80010715
1695–2690
Frequency range MHz 1695 – 1880 1850 – 1990 1920 – 2180 2200 – 2490 2490 – 2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
4 Ports
Average gain dBi 13.1 13.7 13.7 13.8 13.6
Horizontal Pattern:
Half-power beam width ° 62 55 55 55 68
Front-to-back ratio
dB > 26 > 27 > 27 > 27 > 25
Total power, ± 30°
Cross polar ratio
Maindirection 0° dB Typically: 25 > 28 28 25 28
Sector ±60° > 10 > 10 > 10 > 10 > 10
Vertical Pattern:
Half-power beam width ° 17.6 16.7 15.9 14.5 12.4
Impedance Ω 50
VSWR < 1.5
Isolation: Intrasystem dB > 26, typ. > 31 > 30, typ. > 31
Isolation: Intersystem dB > 30 (Y1 // R1)
W
Total power for the antenna W 800 (at 50 °C ambient temperature)
Input 4 x 4.3-10 female

mph 150
inches 23.7 / 11.8 / 6.0
inches 33.3 x 12.8 x 7.6
for 42– 115 mm |
4-Port Antenna R1 B1
HPBW 65° 60°
4-Port Antenna LB/HB 0.6m 65°/60° | 790–960 12dBi | 1710–2170 14dBi

Type No. 742226V01
Lowband R1
790–960
Polarization ° +45, −45 +45, −45 +45, −45
Gain dBi 2 x 11.1 2 x 11.4 2 x 11.8
Horizontal Pattern:
Half-power beam width 68 67 65
Front-to-back ratio Copolar: > 23 Copolar: > 23 Copolar: > 25
dB
(180°±30°) Total power: > 20 Total power: > 20 Total power: > 22
Cross polar ratio
Sector ±60° > 10 > 10 > 10
Squint ° ±3.0
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5
Isolation: Intrasystem dB > 30
Isolation: Intersystem dB > 42 (790–960 // 1710–2170 MHz)
4-Port Antenna
742226V01
Highband B1
1710–2170
Polarization ° +45, −45 +45, −45 +45, −45
4 Ports
Gain dBi 2 x 12.8 2 x 13.3 2 x 13.6
Horizontal Pattern:
Front-to-back ratio Copolar: > 25 Copolar: > 25 Copolar: > 25
dB
(180°±30°) Total power: > 22 Total power: > 22 Total power: > 22
Cross polar ratio
Sector ±60° > 10 > 10 > 10
Squint ° ±1.5
Vertical Pattern:
Half-power beam width ° 20 18 17.5
Impedance Ω 50
VSWR < 1.5

Connector position Bottom or top
mph 124
inches 22.8 / 10.3 / 5.5
inches 29.8 x 11.1 x 6.8
for 42– 115 mm |
* Inverted mounting:
Connector position top: Change drain hole screw.
HPBW 65° 65°
4-Port Antenna LB/HB 1.4m 65° | 790–960 15dBi | 1710–2690 17.5dBi

Type No. 80010664
Lowband R1, connector 1–2
790–960
Polarization ° +45, −45 +45, −45 +45, −45
Average gain dBi 14.5 ... 14.4 ... 14.2 14.6 ... 14.5 ... 14.3 14.8 ... 14.6 ... 14.4
Tilt ° 0 ... 8 ... 16 0 ... 8 ... 16 0 ... 8 ... 16
Horizontal Pattern:
Half-power beam width ° 69 68 67°
Front-to-back ratio, copolar (180°±30°) dB > 25 > 25 > 25
Cross polar ratio
Sector ±60° > 10 >9 >8
Horizontal Pattern:
Electrical tilt ° 0–16, continuously adjustable
Sidelobe suppression for first sidelobe °T 0 ... 8 ... 16 0 ... 8 ... 16 0 ... 8 ... 16
above main beam dB 16 ... 15 ... 15 16 ... 15 ... 15 15 ... 15 ... 14
Impedance Ω 50
VSWR < 1.5
W
4-Port Antenna
80010664
1710–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
4 Ports
Average gain dBi 17.2 ... 17.3 ... 16.8 17.4 ... 17.4 ... 16.9 17.6 ... 17.7 ... 17.0 17.0 ... 16.8 ... 16.0 17.2 ... 17.3 ... 16.7
Tilt ° 2 ... 6 ... 10 2 ... 6 ... 10 2 ... 6 ... 10 2 ... 6 ... 10 2 ... 6 ... 10
Horizontal Pattern:
Front-to-back ratio, copolar (180°±30°) dB > 25 > 28 > 29 > 26 > 25
Maindirection 0° Typically: 18 > 20 20 23 23
Sector ±60° >9 > 10 > 10 > 10 >8
Horizontal Pattern:
Sidelobe suppression for first sidelobe °T 2 ... 6 ... 10 2 ... 6 ... 10 2 ... 6 ... 10 2 ... 6 ... 10 2 ... 6 ... 10
above main beam dB 14 ... 15 ... 16 14 ... 15 ... 17 15 ... 16 ... 17 17 ... 18 ... 18 15 ... 17 ... 18
Impedance Ω 50
VSWR < 1.5
Isolation: Intrasystem dB > 28 > 30
Max. effective power per port W 200 (at 50 °C ambient temperature)
Input 4 x 7-16 female (long neck)

Adjustment mechanism 2 x, Position bottom
mph 124
Height / width / depth mm 1403 / 300 / 152
inches 55.2 / 11.8 / 6.0
Category of
M (Medium)
mounting hardware
inches 68.0 x 12.7 x 7.5
for 42 –115 mm |
HPBW 65° 65°

Type No. 80010665V01
Lowband R1, connector 1– 2
790–960
Horizontal Pattern:
dB > 23 > 25 > 26
dB > 23 > 23 > 20
at Boresight
dB > 9.5 > 10.0 > 11.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 0.0 – 10.0
Tilt Accuracy ° < 0.5 < 0.5 < 0.6
dB > 16 > 18 > 16
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (R1 // Y1)
per Port
Ports R1
4-Port Antenna
80010665V01
Highband Y1, connector 3 – 4
1710–2690
4 Ports
Horizontal Pattern:
dB > 25 > 26 > 27 > 26 > 25
dB > 14 > 19 > 20 > 18 > 20
at Boresight
dB > 8.0 > 9.5 > 10.0 > 10.0 > 11.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 8.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.3 < 0.2 < 0.3
dB > 17 > 18 > 19 > 20 > 20
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y1

for the Antenna
inches 78.6 / 11.8 / 6.0
Mounting Hardware
inches 91.2 / 12.7 / 7.5
for 42 –115 mm |
HPBW 65° 65°

Type No. 80010666V01
698–960
Horizontal Pattern:
dB > 22 > 24 > 26 > 27
dB > 23 > 22 > 22 > 21
at Boresight
dB > 8.0 > 8.5 > 9.5 > 8.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 1.5 – 10.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.3
dB > 16 > 17 > 16 > 15
Suppression
Upper Side Lobe
Suppression, 20° Sector dB > 16 > 17 > 16 > 15
above Main Beam
per Port
Ports R1
4-Port Antenna
80010666V01
1710–2690
4 Ports
Horizontal Pattern:
dB > 25 > 26 > 27 > 25 > 26
dB > 15 > 18 > 20 > 16 > 21
at Boresight
dB > 8.0 > 11.0 > 11.0 > 10.0 > 9.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 8.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
dB > 19 > 18 > 20 > 20 > 18
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y1

for the Antenna
inches 103.2 / 11.8 / 6.0
Mounting Hardware
inches 116.2 / 12.7 / 7.5
for 42 –115 mm |
4-Port Antenna R1 B1
HPBW 90° 90°
4-Port Antenna LB/HB 2.6m 90° | 790–960 16.5dBi | 1710–2180 18dBi

Type No. 80010123V03
790–960
Polarization ° +45, −45 +45, −45 +45, −45
Average gain dBi 16.1 ... 16.2 ... 16.1 16.3 ... 16.4 ... 16.3 16.5 ... 16.6 ... 16.5
Tilt ° 0.5 ... 4 ... 7 0.5 ... 4 ... 7 0.5 ... 4 ... 7
Horizontal Pattern:
Cross polar ratio Typically: Typically: Typically:
Maindirection 0° 18 18 20
dB > 10 > 10 > 13
Sector ±60°
±60° avg. 16 avg. 16 avg. 19
Squint ° ±3.0
Vertical Pattern:
Electrical tilt ° 0.5–7, continuously adjustable
Min. sidelobe supression for °T 0.5 ... 4 ... 7 0.5 ... 4 ... 7 0.5 ... 4 ... 7
first sidelobe above main beam dB 15 ... 14 ... 14 15 ... 14 ... 14 15 ... 14 ... 15
VSWR < 1.5
Max. power per input 500 (at 50 °C ambient temperature)
W
Total power 1000 (at 50 °C ambient temperature)
4-Port Antenna
80010123V03
Highband B1, connector 3 – 4
1710–2180
Polarization ° +45, −45 +45, −45 +45, −45
4 Ports
Average gain dBi 17.8 ... 17.7 ... 17.4 18.0 ... 17.9 ... 17.4 17.9 ... 17.8 ... 17.3
Tilt ° 0 ... 3 ... 6 0 ... 3 ... 6 0 ... 3 ... 6
Horizontal Pattern:
Front-to-back ratio dB > 23 > 23 > 23
(180°±30°)
Maindirection 0° 16 16 15
dB
Sector ±60° > 10 > 12 > 10
±60° avg. 16 avg. 17 avg. 18
Squint ° ±3.0
Vertical Pattern:
Min. sidelobe supression for °T 0 ... 3 ... 6 0 ... 3 ... 6 0 ... 3 ... 6
first sidelobe above main beam dB 18 ... 17 ... 16 18 ... 17 ... 17 18 ... 16 ... 17
VSWR < 1.5
Max. power per input 250 (at 50 °C ambient temperature)
W
Total power 500 (at 50 °C ambient temperature)

Adjustment Mechanism 2x, Position bottom
mph 124
inches 103.7 / 10.3 / 5.9
mounting hardware
inches 116.8 x 11.1 x 7.2
for 42 –115 mm |
4-Port Antenna Y1 Y2
HPBW 65° 65°
4-Port Antenna 2 HB 0.9m 65° | 2x1710–2690 16.5dBi

Type No. 80010682
Highband Y1; Y2
1710–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain at 0° tilt dBi 15.8 16.2 16.6 16.7
Horizontal Pattern:
Cross polar ratio 0° dB Typically: 25 Typically: 25 Typically: 25 Typically: 25
Sector ±60° >8 >8 > 10 > 10
Vertical Pattern:
Half-power beam width ° 11 10 9 8.7
Electrical tilt ° 0 –12, continuously adjustable
Sidelobe supression for first °T 0 ... 6 ... 12 0 ... 6 ... 12 0 ... 6 ... 12 0 ... 6 ... 12
Impedance Ω 50
VSWR < 1.5
Max. eff. power per port W 200 (at 50 °C ambient temperature)
Max. eff. power for the antenna 600 (at 50 °C ambient temperature)

mph 124
inches 33.7 / 12.4 / 2.8
Category of
M (Medium)
mounting hardware
inches 45.1 x 13.3 x 4.4
for 42 –115 mm |
HPBW 65° 65°
4-Port Antenna 2HB 1.5m 65° | 2x1695–2690 18dBi ESLS

Type No. 80020622
Left side, highband Y1, connector 1– 2
4 Ports
1695–2690
Horizontal Pattern:
dB > 24 > 24 > 26 > 23
dB > 22 > 22 > 22 > 18
at Boresight
dB > 12.5 > 10.0 > 9.5 > 13.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.2 < 0.2
dB > 20 > 20 > 20 > 20
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (Y1 // Y2)
per Port
Ports Y1
Data sheet continued on next page.
4-Port Antenna
80020622
Right side, highband Y2, connector 3 – 4
1695–2690
Horizontal Pattern:
dB > 25 > 26 > 25 > 23
dB > 22 > 22 > 22 > 19
at Boresight
dB > 13.5 > 11.0 > 9.5 > 12.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.2 < 0.2
dB > 19 > 19 > 20 > 20
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y2

Polarization ° −45, +45 Wind Speed: 150 km/h) Maximal: 620 | 139
for the Antenna
inches 57.9 / 10.8 / 3.4
Mounting Hardware
inches 70.5 / 11.7 / 4.7
for 42 –115 mm |
HPBW 65° 65°
4-Port Antenna 2HB 1.7m 65° | 2x1710–2690 19dBi

Type No. 80010652
Highbands Y1; Y2
4 Ports
1710–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 18.2 ... 18.4 ... 18.0 18.7 ... 18.9 ... 18.4 18.8 ... 19.0 ... 18.3 18.7 ... 19.0 ... 18.3
Tilt ° 0 ... 5 ... 10 0 ... 5 ... 10 0 ... 5 ... 10 0 ... 5 ... 10
Horizontal Pattern:
dB
Sector ±60° > 10 > 10 > 10 > 10
Vertical Pattern:
Sidelobe suppression °T 0 ... 5 ... 10 0 ... 5 ... 10 0 ... 5 ... 10 0 ... 5 ... 10
for first sidelobe above main beam dB ≥ 18 ... 16 ... 15 ≥ 18 ... 16 ... 15 ≥ 18 ... 16 ... 15 ≥ 18 ... 15 ... 15
Impedance Ω 50
VSWR < 1.5
W

mph 124
inches 65.7 / 12.4 / 2.8
inches 77.2 x 14.8 x 4.4
for 42– 115 mm |
4-Port Dual-Beam B1 B2
HPBW 45° 45°
4-Port Dual-Beam Antenna 2HB 1.3m 45° | 1710–2200 19.5dBi

Type No. 80010606V01
Left side, highband B1, connector 1– 2
1710–2200
Horizontal Pattern:
dB > 26 > 27 > 26
dB > 9.0 > 8.5 > 10.5
over Sector
Azimuth Beam Squint ° –0.5 ± 1.2 0.0 ± 1.2 0.0 ± 0.9
Azimuth Beam
dB < 1.0 < 1.5 < 1.5
Vertical Pattern:
Electrical Downtilt
° 0.0 – 10.0
Tilt Accuracy ° < 0.5 < 0.5 < 0.4
dB > 19 > 22 > 19
Suppression
Port to Port Isolation dB > 30 (B1 // B2)
per Port
Ports B1
4-Port Dual-Beam
80010606V01
Right side, highband B2, connector 3– 4
1710–2200
4 Ports
Horizontal Pattern:
dB > 28 > 26 > 26
dB > 9.0 > 9.5 > 10.0
over Sector
Azimuth Beam Squint ° 0.0 ± 1.4 0.5 ± 1.2 1.0 ± 0.8
Azimuth Beam
dB < 2.0 < 2.0 < 2.5
Vertical Pattern:
Electrical Downtilt
° 0.0 – 10.0
Tilt Accuracy ° < 0.5 < 0.4 < 0.4
dB > 18 > 22 > 20
Suppression
Port to Port Isolation dB > 30 (B1 // B2)
per Port
Ports B2

for the Antenna
inches 51.7 / 15.0 / 5.9
Mounting Hardware
inches 66.8 / 15.8 / 6.8
for 42 –115 mm |
4-Port Dual-Beam Y1 Y2
HPBW 35° 35°
4-Port Dual-Beam Antenna 2HB 1.3m 35° | 2x 1695–2690 19.5dBi

Type No. 80010656
1695–2690
Horizontal Pattern:
dB > 21 > 23 > 23 > 24 > 23
dB > 15.0 > 16.5 > 17.0 > 13.5 > 8.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 10.0
Tilt Accuracy ° < 0.5 < 0.3 < 0.2 < 0.3 < 0.3
dB > 18 > 21 > 20 > 19 > 16
Suppression
per Port
Ports Y1
4-Port Dual-Beam
80010656
1695–2690
4 Ports
Horizontal Pattern:
dB > 20 > 20 > 22 > 25 > 23
dB > 15.0 > 16.5 > 17.0 > 13.5 > 7.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 10.0
Tilt Accuracy ° < 0.7 < 0.4 < 0.4 < 0.4 < 0.3
dB > 18 > 20 > 20 > 19 > 15
Suppression
per Port
Ports Y2

for the Antenna
inches 49.4 / 15.0 / 5.9
Mounting Hardware
inches 66.8 / 15.8 / 6.8
for 42 –115 mm |
4-Port Antenna P1 P2
HPBW 65° 65°
4-Port Antenna 2x3300–3800 1.0m 65° | 2x3300–3800 17.5dBi

Type No. 80010922
Left side, highband P1, connector 1 – 2
3300–3800
Frequency Range MHz 3300 – 3590 3600 – 3800
Gain at mid Tilt dBi 17.5 17.6
Gain over all Tilts dBi 17.3 ± 0.4 17.4 ± 0.5
Horizontal Pattern:
Azimuth Beamwidth ° 66 ± 4.6 63 ± 4.9
Front-to-Back Ratio, dB > 23 > 21
Cross Polar Discrimination dB > 12.0 > 9.0
over Sector
Azimuth Beam dB < 1.0 < 1.5
Vertical Pattern:
Elevation Beamwidth ° 6.0 ± 0.3 5.6 ± 0.3
Electrical Downtilt 2.0 – 12.0
°
continuously adjustable (P1 + P2 simultaneously)
Tilt Accuracy ° < 0.4 < 0.4
First Upper Side Lobe dB > 24 > 23
Suppression
Upper Side Lobe
Suppression, 20° Sector dB > 17 > 18
above Main Beam
Cross Polar Isolation dB > 25, typ. > 28
Port to Port Isolation dB > 27, typ. > 30 (P1 // P2)
per Port
Ports P1
4-Port Antenna
80010922
Right side, highband P2, connector 3 –4
3300–3800
4 Ports
Horizontal Pattern:
over Sector
Azimuth Beam dB < 1.5 < 1.5
Vertical Pattern:
°
continuously adjustable (P1 + P2 simultaneously)
Suppression
Upper Side Lobe
above Main Beam
Cross Polar Isolation dB > 25, typ. > 28
Port to Port Isolation dB > 27, typ. > 30 (P2 // P1)
per Port
Ports P2

400 (at 50 °C ambient Max. Wind Velocity km/h 241
Max. Effective Power W temperature) mph 150
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements. 38.2 / 7.0 / 3.0
inches
Mounting Hardware
inches 52.0 / 7.5 / 3.7
for 42 –115 mm |
6 Ports
6-Port Antenna 698–960 65° 13.5dBi 2°–16°T 84510864 1412 4.3-10, bottom 64 AK
1695–2690 65° 17.5dBi 2°–12°T +
1695–2690 65° 17.5dBi 2°–12°T 65
6-Port Antenna 698–960 65° 15dBi 2°–12°T 84510865 1885 4.3-10, bottom 66 AK
1695–2690 65° 17.5dBi 2°–12°T +
1695–2690 65° 17.5dBi 2°–12°T 67
6-Port Antenna 790–960 65° 16.5dBi 2°–14°T 80010291V02 2058 7-16, bottom 68 P
1710–2180 65° 16.5dBi 0°–14°T +
1710–2180 65° 16.5dBi 0°–14°T 69
6-Port Antenna 790–960 65° 17.5dBi 2°–10°T 80010292V03 2598 7-16, bottom 70 P
1710–2180 65° 17.5dBi 0°–10°T +
1710–2180 65° 17dBi 0°–10°T 71
6-Port Antenna 698–960 65° 16dBi 1°–12°T 80010691V01 1997 7-16, bottom 72 R
1710–2690 65° 16dBi 2°–12°T +
1710–2690 65° 16dBi 2°–12°T 73
6-Port Antenna 698–960 65° 17dBi 1.5°–10°T 80010692V01 2622 7-16, bottom 74 R
1710–2690 65° 17dBi 0°–10°T +
1710–2690 65° 17dBi 2°–10°T 75
6-Port Antenna 698–960 65° 14.5dBi 2°–16°T 80010864 1402 7-16, bottom 76 S
1695–2690 65° 17.5dBi 2.5°–12°T +
1695–2690 65° 18dBi 2.5°–12°T 77
6-Port Antenna 698–960 65° 16dBi 2°–12°T 80010865 1921 7-16, bottom 78 S
1695–2690 65° 18dBi 2.5°–12°T +
1695–2690 65° 18dBi 2.5°–12°T 79
6-Port Antenna 698–960 65° 17dBi 1°–10°T 80010866 2441 7-16, bottom 80 S
1695–2690 65° 18dBi 2.5°–12°T +
1695–2690 65° 18dBi 2.5°–12°T 81
Type P Type R Type S Type AK
B2 Y2
Y1 Y2
B1 Y1 R1 Y1 R1 Y2
R1 R1 Left Right Left Center Right
62
6 Ports
6-Port Antenna 790–862 65° 14dBi 0°–14°T 80010697 1332 7-16, bottom 82 N
880–960 65° 14dBi 0°–14°T +
1710–2180 65° 17dBi 0°–8°T 83
6-Port Antenna 790–862 65° 15.5dBi 0°–10°T 80010698 1932 7-16, bottom 84 N
6 Ports
880–960 65° 16dBi 0°–10°T +
1710–2180 65° 18.5dBi 0°–6°T 85
6-Port Antenna 790–862 65° 16.5dBi 0°–7°T 80010699 2532 7-16, bottom 86 N
880–960 65° 17dBi 0°–7°T +
1710–2180 65° 18.5dBi 0°–6°T 87
3 x Highband
6-Port Antenna 1710–2690 65° 18dBi 2°–14°T 80020727 1475 4.3-10, bottom 88 J
1710–2690 65° 18dBi 2°–14°T +
1710–2690 65° 18dBi 2°–14°T 89
3 x Highband Special Design
6-Port Tri-Sector Slimpole 1710–2690 80° 10dBi 0°T 80020125 691 4.3-10, bottom 222 C/C/C
Type C Type J Type N
R2
1x
Y1 Y2 Y3 B1
Y1 Left Center Right R1
63
6-Port Antenna R1 Y1 Y2
Frequency Range 698–960 1695–2690 1695–2690
HPBW 65° 65° 65°
6-Port Antenna LB/2HB 1.4m 65° | 698–960 13.5dBi | 2x1695–2690 17.5dBi

Type No. 84510864
Center, lowband R1, connector 1– 2
698–960 Integrated RET
Horizontal Pattern:
Front-to-Back Ratio, dB > 25 > 26 > 26 > 25
Total Power, ±30°
Cross Polar Discrimination dB 19 19 18 16
at Boresight
Cross Polar Discrimination dB 13.1 11.4 10.9 8.4
over Sector
Azimuth Beam dB 3.0 2.0 2.0 1.5
Vertical Pattern:
Electrical Downtilt ° 2.0 – 16.0
Tilt Accuracy ° < 0.9 < 0.7 < 0.7 < 0.8
First Upper Side Lobe dB > 16 > 18 > 19 > 18
Suppression
Port to Port Isolation dB > 28 (R1 // Y1, Y2)
per Port
Ports R1
Left side, highband Y1, connector 3 – 4

1695–2690
Frequency Range MHz 1695 – 1880 1850 – 1990 1920 – 2170 2300 – 2400 2305 – 2360 2500 – 2690
Gain at mid Tilt dBi 16.9 17.2 17.5 17.3 17.2 17.8
Gain over all Tilts dBi 16.8 ± 0.6 17.1 ± 0.7 17.3 ± 0.9 17.3 ± 0.8 17.2 ± 0.7 17.7 ± 0.8
Horizontal Pattern:
Azimuth Beamwidth ° 63 ± 5.3 61 ± 2.8 60 ± 3.2 65 ± 3.9 65 ± 3.5 62 ± 2.8
dB > 27 > 25 > 23 > 27 > 27 > 26
Total Power, ±30°
dB 26 25 19 18 18 20
at Boresight
dB 8.3 9.1 7.8 8.4 6.9 5.5
over Sector
Azimuth Beam
dB 2.0 2.5 4.5 2.5 3.0 2.0
Vertical Pattern:
Elevation Beamwidth ° 7.4 ± 0.5 6.9 ± 0.3 6.5 ± 0.4 5.7 ± 0.3 5.7 ± 0.4 5.1 ± 0.3
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.6 < 0.7 < 0.7 < 0.8 < 0.7 < 0.8
dB > 16 > 17 > 17 > 16 > 16 > 16
Suppression
Port to Port Isolation > 28 (Y1 // R1)
dB > 28 (Y1 // Y2)
per Port
Ports Y1
6-Port Antenna
84510864
1695–2690
Horizontal Pattern:
dB > 26 > 25 > 24 > 26 > 26 > 26
Total Power, ±30°
6 Ports
dB 25 25 19 19 19 19
at Boresight
dB 9.3 9.6 6.8 7.2 5.7 6.1
over Sector
Azimuth Beam
dB 2.0 3.0 3.5 3.0 3.0 2.0
Vertical Pattern:
Electrical Downtilt
°
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.6 < 0.5 < 0.4
dB > 16 > 17 > 18 > 16 > 16 > 16
Suppression
dB > 28 (Y2 // Y1)
per Port
Ports Y2
Electrical specifications, all ports Mechanical specifications

Return Loss dB > 14 Adjustment Mechanism Integrated RET,
Passive Intermodulation dBc < –150 (2 x 43 dBm carrier) Wind load (at Rated N | lbf Frontal: 660 | 148
Polarization ° +45, –45 Wind Speed: 150 km/h) Maximal: 725 | 163
for the Antenna
inches 55.6 / 13.9 / 6.5
Mounting Hardware
inches 63.9 / 14.8 / 8.3
Scope of Supply Panel, integrated RET and
2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
Frequency Range 698–960 1695–2690 1695–2690
Dual Polarization 65° 65° 65°
6-Port Antenna LB/2HB 1.9m 65° | 698–960 15dBi | 2x1695–2690 17.5dBi

Type No. 84510865
698 – 960 Integrated RET
Horizontal Pattern:
dB > 26 > 27 > 27 > 27
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.7 < 0.5 < 0.6 < 1.0
dB > 17 > 16 > 16 > 18
Suppression
Port to Port Isolation dB 30 (R1 // Y1, Y2)
per Port
Ports R1

1695–2690
Horizontal Pattern:
dB > 26 > 24 > 23 > 28 > 25
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 1.2 < 1.2 < 1.1 < 0.9 < 0.9
dB > 17 > 17 > 17 > 16 > 16
Suppression
Port to Port Isolation 28 (Y1 // R1)
dB
30 (Y1 // Y2)
per Port
Ports Y1
6-Port Antenna
84510865
1695–2690
Horizontal Pattern:
dB > 25 > 24 > 24 > 27 > 25
Vertical Pattern:
6 Ports
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 1.1 < 1.1 < 0.9 < 0.8 < 0.9
dB > 19 > 21 > 20 > 18 > 18
Suppression
Port to Port Isolation dB 28 (Y2 // R1, Y1)
per Port
Ports Y2

for the Antenna
inches 74.2 / 13.9 / 6.5
Mounting Hardware
inches 82.7 / 14.8 / 8.3
Scope of Supply Panel, integrated RCU and
2 units of clamps
for 55–115 mm |
6-Port Antenna R1 B1 B2
Frequency Range 790–960 1710–2180 1710–2180
HPBW 65° 65° 65°

Type No. 80010291V02
790–960
Polarization ° +45, −45 +45, −45 +45, −45
Average gain: dBi 16.2 ... 16.0 ... 15.7 16.3 ... 16.1 ... 15.8 16.4 ... 16.2 ... 15.8
Tilt ° 2 ... 8 ... 14 2 ... 8 ... 14 2 ... 8 ... 14
Horizontal Pattern:
Maindirection 0° dB > 25 > 25 > 25
Sector ±60° > 10 > 10 > 10
Tracking dB 1.0
Vertical Pattern:
Half-power beam width ° 10 9.7 9.3
Sidelobe suppression for first °T 2 ... 8 ... 14 2 ... 8 ... 14 2 ... 8 ... 14
Impedance Ω 50
VSWR < 1.5
Isolation: Intersystem > 35 (790–960 // 1710–2180 MHz)
dB
> 30 (1710–2180 // 1710–2180 MHz)
W 900 (at 50 °C ambient temperature)
Max. effective power for the antenna
6-Port Antenna
80010291V02
Highbands B1, connector 3 – 4; B2, connector 5 – 6
1710–2180 1710–2180
Polarization ° +45, −45 +45, −45 +45, −45
Average gain:
1710–2180 MHz B1: dBi 15.9 ... 15.9 ... 15.5 16.2 ... 16.2 ... 15.7 16.3 ... 16.3 ... 15.8
1710–2180 MHz B2: dBi 15.8 ... 15.8 ... 15.4 16.1 ... 16.1 ... 15.4 16.3 ... 16.2 ... 15.5
Tilt ° 0 ... 7 ... 14 0 ... 7 ... 14 0 ... 7 ... 14
Horizontal Pattern:
6 Ports
Maindirection 0° dB > 18 > 19 > 20
Sector ±60° > 10 > 10 > 10
Tracking 1.0
Vertical Pattern:
Half-power beam width ° 9.5 9 8.7
Sidelobe suppression for first °T 0 ... 7 ... 14 0 ... 7 ... 14 0 ... 7 ... 14
Impedance Ω 50
VSWR < 1.5
Isolation: Intersystem > 35 (790–960 // 1710–2180 MHz)
dB
> 30 (1710–2180 // 1710–2180 MHz)
Max. effective power for the antenna

mph 124
inches 81.0 / 10.3 / 5.9
inches 93.9 x 11.1 x 7.2
for 42– 115 mm |
6-Port Antenna R1 B1 B2
Frequency Range 790–960 1710–2180 1710–2180
HPBW 65° 65° 65°

Type No. 80010292V03
790–960
Horizontal Pattern:
dB > 26 > 27 > 28
dB > 25 > 25 > 27
at Boresight
dB > 14.0 > 14.5 > 12.5
over Sector
Azimuth Beam
dB < 2.0 < 2.0 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.0 – 10.0
Tilt Accuracy ° < 0.1 < 0.1 < 0.2
dB > 14 > 15 > 15
Suppression
Port to Port Isolation dB > 36 (R1 // B1, B2)
per Port
Ports R1
Lower highband B1, connector 3– 4

1710–2180
Horizontal Pattern:
dB > 29 > 29 > 26
dB > 31 > 30 > 29
at Boresight
dB > 12.0 > 12.5 > 11.5
over Sector
Azimuth Beam
dB < 0.5 < 1.0 < 1.0
Vertical Pattern:
Electrical Downtilt
° 0.0 – 10.0
Tilt Accuracy ° < 0.6 < 0.7 < 0.6
dB > 14 > 17 > 16
Suppression
Port to Port Isolation dB > 36 (B1 // R1, B2)
per Port
Ports B1
6-Port Antenna
80010292V03
Upper highband B2, connector 5–6
1710–2180
Horizontal Pattern:
dB > 28 > 30 > 27
6 Ports
dB > 30 > 30 > 28
at Boresight
over Sector dB > 14.5 > 14.0 > 11.0
Azimuth Beam
dB < 0.5 < 1.0 < 1.5
Vertical Pattern:
Electrical Downtilt
° 0.0 – 10.0
Tilt Accuracy ° < 0.4 < 0.5 < 0.6
dB > 16 > 16 > 16
Suppression
Port to Port Isolation dB > 36 (B2 // R1, B1)
per Port
Ports B2

for the Antenna
inches 102.3 / 10.3 / 5.7
Mounting Hardware
inches 114.3 / 11.2 / 7.2
for 42 –115 mm |
Frequency Range 698–960 1710–2690 1710–2690
HPBW 65° 65° 65°
6-Port Antenna LB/2HB 2.0m 65° | 698–960 16dBi | 2x1710–2690 16dBi

Type No. 80010691V01
698–960
Horizontal Pattern:
Cross Polar Discrimination dB > 8.5 > 10.0 > 10.5 > 9.5
over Sector
Vertical Pattern:
Tilt Accuracy ° < 0.6 < 0.5 < 0.4 < 0.3
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports R1
Lower highband Y1, connector 3 – 4

1710–2690
Horizontal Pattern:
Front-to-Back Ratio, dB > 24 > 25 > 24 > 24 > 23
Cross Polar Discrimination dB > 7.5 > 7.5 > 9.0 > 7.5 > 8.0
over Sector
Vertical Pattern:
Tilt Accuracy ° < 0.5 < 0.6 < 0.5 < 0.4 < 0.3
First Upper Side Lobe dB > 18 > 18 > 17 > 15 > 18
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 32 (Y1 // R1, Y2)
per Port
Ports Y1
6-Port Antenna
80010691V01
Upper highband Y2, connector 5 – 6
1710–2690
Horizontal Pattern:
6 Ports
dB > 8.0 > 9.0 > 8.5 > 6.5 > 8.5
over Sector
Vertical Pattern:
Tilt Accuracy ° < 0.4 < 0.4 < 0.3 < 0.3 < 0.5
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y2

for the Antenna
inches
Mounting Hardware
inches 91.2 / 12.7 / 7.5
for 42 –115 mm |
Frequency Range 698–960 1710–2690 1710–2690
HPBW 65° 65° 65°

Type No. 80010692V01
Low band R1, connector 1– 2
698–960
Horizontal Pattern:
dB > 22 > 25 > 26 > 27
dB > 22 > 23 > 23 > 23
at Boresight
dB > 9.0 > 9.5 > 10.0 > 8.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 1.5 – 10.0
Tilt Accuracy ° < 0.5 < 0.5 < 0.5 < 0.5
dB > 17 > 18 > 18 > 16
Suppression
Port to Port Isolation dB >32 (R1 // Y1 // Y2)
per Port
Lower high band Y1, connector 3 – 4

1710–2690
Horizontal Pattern:
dB > 25 > 26 > 25 > 24 > 23
dB > 16 > 21 > 20 > 17 > 20
at Boresight
dB > 8.0 > 10.0 > 9.5 > 8.0 > 10.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 0.0 – 10.0
Tilt Accuracy ° < 0.4 < 0.3 < 0.4 < 0.6 < 0.3
dB > 13 > 16 > 17 > 15 > 16
Suppression
per Port
6-Port Antenna
80010692V01
Upper high band Y2, connector 5 – 6
1710–2690
Horizontal Pattern:
dB > 23 > 24 > 25 > 25 > 23
6 Ports
dB > 15 > 20 > 21 > 19 > 14
at Boresight
dB > 6.0 > 9.5 > 9.5 > 7.0 > 7.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 10.0
Tilt Accuracy ° < 0.3 < 0.2 < 0.2 < 0.3 < 0.4
dB > 14 > 16 > 16 > 20 > 18
Suppression
per Port

for the Antenna
Values based on ngmn-P-BASTA requirements. Height / Width / Depth mm 2622 / 300 / 152
inches 103.2 / 11.8 / 6.0
Mounting Hardware
inches 116.2 / 12.7 / 7.5
2 units of clamps
for 42 –115 mm |
Frequency Range 698–960 1695–2690 1695–2690
HPBW 65° 65° 65°
6-Port Antenna LB/2HB 1.4m 6

5° | 698–960 14.5dBi | 2x1695–2690 18dBi
Type No. 80010864
698–960
Horizontal Pattern:
dB > 22 > 24 > 24 > 25
dB > 23 > 23 > 24 > 22
at Boresight
dB > 7.0 > 7.0 > 7.0 > 7.5
over Sector
Azimuth Beam
dB < 2.0 < 1.5 < 2.0 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.0 – 16.0
Tilt Accuracy ° < 0.6 < 0.8 < 0.6 < 0.5
dB > 15 > 16 > 16 > 19
Suppression
Upper Side Lobe
above Main Beam
per Port

1695–2690
Horizontal Pattern:
dB > 24 > 28 > 26 > 24 > 24
dB > 16 > 20 > 23 > 18 > 15
at Boresight
dB > 7.0 > 9.0 > 10.5 > 8.5 > 9.5
over Sector
Azimuth Beam
dB < 1.5 < 2.5 < 2.5 < 2.0 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.2 < 0.2 < 0.2 < 0.2
dB > 17 > 17 > 18 > 19 > 15
Suppression
Upper Side Lobe
above Main Beam
per Port
6-Port Antenna
80010864
1695–2690
Horizontal Pattern:
dB > 24 > 23 > 23 > 24 > 25
6 Ports
dB > 22 > 24 > 24 > 20 > 18
at Boresight
dB > 15.5 > 15.0 > 13.0 > 7.5 > 9.5
over Sector
Azimuth Beam
dB < 1.0 < 1.0 < 1.0 < 1.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.3 < 0.2
dB > 21 > 21 > 22 > 18 > 19
Suppression
Upper Side Lobe
above Main Beam
per Port

for the Antenna
inches 55.2 / 14.8 / 6.7
Mounting Hardware
inches 63.1 / 15.6 / 8.3
2 units of clamps
for 42 –115 mm |
Frequency Range 698–960 1695–2690 1695–2690
HPBW 65° 65° 65°

5° | 698–960 16dBi | 2x1695–2690 18dBi
Type No. 80010865
698–960
Horizontal Pattern:
dB > 23 > 25 > 26 > 26
dB > 23 > 22 > 23 > 22
at Boresight
dB > 8.0 > 8.0 > 9.0 > 8.0
over Sector
Azimuth Beam
dB < 2.0 < 2.0 < 2.0 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.5 < 0.5 < 0.4 < 0.5
dB > 14 > 16 > 16 > 15
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (R1 // Y1 ,Y2)
per Port

1695–2690
Horizontal Pattern:
dB > 26 > 27 > 26 > 23 > 23
dB > 16 > 20 > 24 > 18 > 15
at Boresight
dB > 7.5 > 8.5 > 10.5 > 8.5 > 9.0
over Sector
Azimuth Beam
dB < 2.5 < 2.5 < 2.0 < 2.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.1 < 0.1
dB > 19 > 17 > 17 > 16 > 16
Suppression
Upper Side Lobe
above Main Beam
per Port
6-Port Antenna
80010865
1695–2690
Horizontal Pattern:
dB > 22 > 24 > 24 > 25 > 26
6 Ports
dB > 15 > 19 > 18 > 17 > 19
at Boresight
dB > 10.5 > 15.0 > 14.5 > 10.0 > 10.0
over Sector
Azimuth Beam
dB < 1.0 < 1.0 < 1.0 < 0.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.3 < 0.3
dB > 19 > 25 > 25 > 19 > 21
Suppression
Upper Side Lobe
above Main Beam
per Port

for the Antenna
inches 75.6 / 14.8 / 6.7
Mounting Hardware
inches 83.5 / 15.6 / 8.3
2 units of clamps
for 42 –115 mm |
Frequency Range 698–960 1710–2690 1710–2690
HPBW 65° 65° 65°

5° | 698–960 17dBi | 2x1695–2690 18dBi
Type No. 80010866
698–960
Horizontal Pattern:
dB > 21 > 24 > 26 > 27
dB > 24 > 25 > 25 > 26
at Boresight
dB > 6.5 > 7.0 > 9.0 > 10.0
over Sector
Azimuth Beam
dB < 2.0 < 2.5 < 2.0 < 2.0
Vertical Pattern:
Electrical Downtilt
° 1.0 – 10.0
Tilt Accuracy ° < 0.3 < 0.4 < 0.4 < 0.4
dB > 17 > 17 > 17 > 18
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (R1 // Y1 ,Y2)
per Port

1695–2690
Horizontal Pattern:
dB > 25 > 25 > 25 > 24 > 23
dB > 16 > 22 > 24 > 19 > 16
at Boresight
dB > 8.5 > 10.5 > 11.0 > 8.5 > 7.5
over Sector
Azimuth Beam
dB < 1.5 < 2.5 < 2.0 < 1.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.5 < 0.4 < 0.4 < 0.3 < 0.3
dB > 19 > 18 > 17 > 16 > 18
Suppression
Upper Side Lobe
above Main Beam
per Port
6-Port Antenna
80010866
1695–2690
Horizontal Pattern:
dB > 24 > 25 > 25 > 25 > 23
6 Ports
dB > 22 > 23 > 21 > 16 > 16
at Boresight
dB > 16.0 > 16.0 > 13.0 > 8.0 > 7.5
over Sector
Azimuth Beam
dB < 1.5 < 1.0 < 1.0 < 1.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.3 < 0.3 < 0.4 < 0.2
dB > 21 > 24 > 23 > 19 > 23
Suppression
Upper Side Lobe
above Main Beam
per Port

for the Antenna
inches 96.1 / 14.8 / 6.7
Mounting Hardware
inches 104.0 / 15.6 / 8.3
2 units of clamps
for 42 –115 mm |
6-Port Antenna R1 R2 B1
Frequency Range 790–862 880–960 1710–2180
HPBW 65° 65° 65°
6-Port Antenna 2LB/HB 1.3m 6

5° | 790–862 14dBi | 880–960 14dBi | 1710–2180 17dBi
Type No. 80010697
790–862 880–960
Horizontal Pattern:
dB > 23 > 22
dB > 23 > 20
at Boresight
dB > 9.0 > 8.5
over Sector
Azimuth Beam
dB < 1.5 < 1.5
Vertical Pattern:
Electrical Downtilt
° 0.0 – 14.0 0.0 – 14.0
dB > 16 > 16
Suppression
Port to Port Isolation > 38 (R1, R2 // B1)
dB
> 28 (R1 // R2)
Ports R1 + R2
6-Port Antenna
80010697
1710–2180
Horizontal Pattern:
dB > 27 > 28 > 26
6 Ports
dB > 18 > 19 > 20
at Boresight
dB > 8.5 > 9.5 > 10.0
over Sector
Azimuth Beam
dB < 1.5 < 1.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 0.0 – 8.0
Tilt Accuracy ° < 0.2 < 0.3 < 0.2
dB > 15 > 19 > 19
Suppression
Port to Port Isolation dB > 38 (R1, R2 // B1)
per Port
Ports B1

for the Antenna
inches 52.4 / 11.8 / 6.0
Mounting Hardware
inches 64.6 / 12.7 / 7.5
for 42 –115 mm |
Frequency Range 790–862 880–960 1710–2180
HPBW 65° 65° 65°
6-Port Antenna 2LB/HB 1.9m 65° | 790–862 15.5dBi | 880–960 16 dBi | 1710–2180 18.5dBi
Type No. 80010698
790–862 880–960
Horizontal Pattern:
dB > 25 > 27
dB > 23 > 25
at Boresight
dB > 14.0 > 13.0
over Sector
Azimuth Beam
dB < 1.0 < 2.0
Vertical Pattern:
Electrical Downtilt
° 0.0 – 10.0 0.0 – 10.0
dB > 16 > 16
Suppression
Port to Port Isolation > 38 (R1 // B1) > 38 (R2 // B1)
dB
> 28 (R1 // R2) > 28 (R2 // R1)
Ports R1 + R2
6-Port Antenna
80010698
1710–2180
Horizontal Pattern:
dB > 29 > 29 > 26
6 Ports
dB > 28 > 29 > 28
at Boresight
dB > 13.5 > 17.0 > 12.0
over Sector
Azimuth Beam
dB < 0.5 < 0.5 < 0.5
Vertical Pattern:
Electrical Downtilt
° 0.0 – 6.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2
dB > 15 > 17 > 16
Suppression
Port to Port Isolation dB > 38 (B1 // R1, R2)
per Port
Ports B1

for the Antenna
inches 76.1 / 10.3 / 5.7
Mounting Hardware
inches 88.8 / 11.1 / 7.2
for 42 –115 mm |
Frequency Range 790–862 880–960 1710–2180
HPBW 65° 65° 65°
6-Port Antenna 2LB/HB 2.5m 6

5° | 790–862 16.5dBi | 880–960 17dBi | 1710–2180 18.5dBi
Type No. 80010699
790–862 880–960
Horizontal Pattern:
dB > 25 > 26
dB > 26 > 26
at Boresight
dB > 13.0 > 14.5
over Sector
Azimuth Beam
dB < 1.5 < 1.5
Vertical Pattern:
Electrical Downtilt
° 0.0 – 7.0 0.0 – 7.0
dB > 12 > 14
Suppression
Port to Port Isolation > 28 (R1 // R2)
dB
> 38 (R1, R2 // B1)
Ports R1 + R2
6-Port Antenna
80010699
1710–2180
Horizontal Pattern:
dB > 29 > 28 > 26
6 Ports
dB > 33 > 31 > 31
at Boresight
dB > 13.5 > 15.0 > 13.5
over Sector
Azimuth Beam
dB < 0.5 < 0.5 < 0.5
Vertical Pattern:
Electrical Downtilt
° 0.0 – 6.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.3
dB > 14 > 18 > 18
Suppression
Port to Port Isolation dB > 38 (B1 // R1, R2)
per Port
Ports B1

for the Antenna
inches 99.7 / 10.3 / 5.7
Mounting Hardware
inches 112.4 / 11.1 / 7.2
for 42 –115 mm |
6-Port Antenna Y1 Y2 Y3
Frequency Range 1710–2690 1710–2690 1710–2690
HPBW 65° 65° 65°
6-Port Antenna 3HB 1.5 m 65° | 3x1710–2690 18dBi

Type No. 80020727
Left system Y1, connector 1– 2
1710–2690
Horizontal Pattern:
over Sector
Azimuth Beam dB < 1.0 < 1.0 < 1.0 < 1.5 < 2.0
Vertical Pattern:
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.4 < 0.3
Suppression
Port to Port Isolation dB > 30 (Y1 // Y2, Y3)
per Port
Ports Y1
Center system Y2, connector 3 – 4

1710–2690
Horizontal Pattern:
over Sector
Azimuth Beam dB < 1.5 < 1.0 < 1.5 < 2.0 < 2.5
Vertical Pattern:
Tilt Accuracy ° < 0.4 < 0.3 < 0.3 < 0.4 < 0.2
Suppression
per Port
Ports Y2
6-Port Antenna
80020727
Right system Y3, connector 5 – 6
1710–2690
Horizontal Pattern:
6 Ports
dB > 13.0 > 10.5 > 9.5 > 8.0 > 11.5
over Sector
Azimuth Beam dB < 1.0 < 1.0 < 1.0 < 2.0 < 2.0
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.4 < 0.4 < 0.4 < 0.5
Suppression
per Port
Ports Y3

Impedance Ω 50 Input 6 x 4.3-10
for the Antenna
inches 58.1 / 14.9 / 4.1
Mounting Hardware
inches 78.7 / 21.6 / 4.7
2 units of clamps
for 42 –115 mm |
8 Ports
8-Port Antenna 698–960 65° 17dBi 1.5°–10°T 80020872 2693 4.3-10, bottom 93 AA
1695–2690 65° 17.5dBi 2.5°–12°T –
1695–2690 65° 18dBi 2.5°–12°T 95
1695–2690 65° 17.5dBi 2.5°–12°T
8-Port Antenna 617–746 65° 13dBi 4°–20°T 80040064 1199 4.3-10, bottom 96 T
617–746 65° 13dBi 4°–20°T –
1695–2200 65° 16dBi 4°–14°T 98
1695–2200 65° 16dBi 4°–14°T
8-Port Antenna 617–746 65° 16dBi 1°–10°T 80040066 2399 4.3-10, bottom 99 T
617–746 65° 16dBi 1°–10°T –
1695–2200 65° 18dBi 0°–10°T 101
1695–2200 65° 18dBi 0°–10°T
8-Port Antenna 698–803 65° 14dBi 2°–16°T 80010767 1448 4.3-10, bottom 102 W
824–960 65° 14.5dBi 2°–16°T +
1695–2690 65° 17.5dBi 2.5°–12°T 103
1695–2690 65° 18dBi 2.5°–12°T
8-Port Antenna 698–803 65° 15dBi 2°–12°T 80010768 1910 4.3-10, bottom 104 W
824–960 65° 16dBi 2°–12°T +
1695–2690 65° 18dBi 2.5°–12°T 105
1695–2690 65° 18dBi 2.5°–12°T
8-Port Antenna 698–803 65° 16dBi 1.5°–10°T 80010769 2429 4.3-10, bottom 106 W
824–960 65° 17dBi 1.5°–10°T +
1695–2690 65° 18dBi 2.5°–12°T 107
1695–2690 65° 18dBi 2.5°–12°T
8-Port Antenna 698–862 65° 14.5dBi 2°–16°T 80010867 1459 7-16, bottom 108 W
880–960 65° 15dBi 2°–16°T +
1695–2690 65° 17.5dBi 2.5°–12°T 109
1695–2690 65° 18.5dBi 2.5°–12°T
8-Port Antenna 698–862 65° 15.5dBi 2°–12°T 80010868 1921 7-16, bottom 110 W
880–960 65° 16dBi 2°–12°T +
1695–2690 65° 18dBi 2.5°–12°T 111
1695–2690 65° 18dBi 2.5°–12°T
8-Port Antenna 698–862 65° 16.5dBi 1.5°–10°T 80010869 2441 7-16, bottom 112 W
880–960 65° 17dBi 1.5°–10°T +
1695–2690 65° 18dBi 2.5°–12°T 113
1695–2690 65° 18dBi 2.5°–12°T
Type AA Type W
R2
Y3 1x
Y1 Y2 Y1 Y2
R1 R1
Left Right Left Right
90
8 Ports
8-Port Antenna 698–862 65° 14.5dBi 2°–16°T 80011867 1499 4.3-10, bottom 114 W
880–960 65° 15dBi 2°–16°T +
1695–2690 65° 18dBi 2.5°–12°T 115
1427–2690 65° 18dBi 2.5°–12°T
8-Port Antenna 698–862 65° 15.5dBi 2°–12°T 80011868 1999 4.3-10, bottom 116 W
880–960 65° 16dBi 2°–12°T +
1695–2690 65° 18dBi 2.5°–12°T 117
1427–2690 65° 18dBi 2.5°–12°T
8-Port Antenna 790–960 65° 16dBi 0°–10°T 80010825 1934 7-16, bottom 118 T
790–960 65° 16dBi 0°–10°T –
1710–2180 60° 18.5dBi 0°–6°T 120
8 Ports
1710–2180 60° 18.5dBi 0°–6°T
8-Port Antenna 790–960 65° 17dBi 0°–8°T 80010826 2399 7-16, bottom 121 T
790–960 65° 17dBi 0°–8°T +
1710–2180 60° 18.5dBi 0°–6°T 122
1710–2180 60° 18.5dBi 0°–6°T
8-Port Antenna 698–960 65° 14dBi 2°–16°T 80010964 1499 4.3-10, bottom 123 AB
698–960 65° 14dBi 2°–16°T –
1695–2690 65° 17.5dBi 2.5°–12°T 125
1695–2690 65° 17.5dBi 2.5°–12°T
8-Port Antenna 698–960 65° 15.5dBi 2°–12°T 80010965 1999 4.3-10, bottom 126 AB
698–960 65° 15.5dBi 2°–12°T –
1695–2690 65° 18dBi 2.5°–12°T 128
1695–2690 65° 18dBi 2.5°–12°T
8-Port Antenna 698–960 65° 16.5dBi 1°–10°T 80010966 2438 4.3-10, bottom 129 AB
698–960 65° 16.5dBi 1°–10°T –
1695–2690 65° 18dBi 2.5°–12°T 131
1695–2690 65° 18dBi 2.5°–12°T
4 x Highband
8-Port Antenna 1710–2170 65° 17.5dBi 2°–11°T 80010728 1471 7-16, bottom 132 K
1710–2170 65° 17.5dBi 2°–11°T +
2490–2690 60° 18dBi 2°–14°T 133
2490–2690 60° 18dBi 2°–14°T
Type AB Type K Type T
Y1 Y2
2x
Y1 Y2 B1 B2
R1 R2 B1 B2 R1 R2
91
92
8-Port Antenna R1 Y1 Y2 Y3
Frequency Range 698–960 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65°

Type No. 80020872
698–960
Horizontal Pattern:
Cross Polar Discrimination dB > 7.5 > 7.5 > 8.0 > 7.5
over Sector
Azimuth Beam dB < 1.5 < 2.0 < 2.0 < 2.0
8 Ports
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.2
Suppression
Port to Port Isolation dB > 28 (R1 // Y1, Y2, Y3)
per Port
Ports R1
Lower highband Y1, connector 3 – 4

1695–2690
Horizontal Pattern:
over Sector
Azimuth Beam dB < 1.5 < 2.0 < 2.0 < 2.5 < 2.0
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.3 < 0.4 < 0.4 < 0.3
Suppression
dB > 30 (Y1 // Y2, Y3)
per Port
Ports Y1

8-Port Antenna
80020872
Upper highband Y2, connector 5 – 6
1695–2690
Horizontal Pattern:
over Sector
Azimuth Beam dB < 1.5 < 1.0 < 0.5 < 1.0 < 2.5
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.4 < 0.3
Suppression
dB > 30 (Y2 // Y1, Y3)
per Port
Ports Y2
Right side, upper highband Y3, connector 7– 8

1695–2690
Horizontal Pattern:
over Sector
Azimuth Beam dB < 1.0 < 1.0 < 0.5 < 0.5 < 2.5
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.3 < 0.2
Suppression
dB > 30 (Y3 // Y1, Y2)
per Port
Ports Y3
8-Port Antenna
80020872
for the Antenna
inches 106.0 / 14.8 / 6.7
Mounting Hardware
8 Ports
inches 114.0 / 15.6 / 8.3
2 units of clamps
for 42 –115 mm |
8-Port Antenna R1 R2 B1 B2
Frequency Range 617–746 617–746 1695–2200 1695–2200
HPBW 65° 65° 65° 65°
8-Port Antenna 2LB/2HB 4ft 65° | 2x617–746 13dBi | 2x1695–2200 16dBi

Type No. 80040064
617–746
Horizontal Pattern:
dB > 20 > 20
dB > 21 > 18
at Boresight
dB > 10 > 11
over Sector
Vertical Pattern:
Electrical Downtilt
° 4.0 – 20.0
dB > 15 > 11
Suppression
Upper Side Lobe
above Main Beam
Cross Polar Isolation dB typ. > 25
Port to Port Isolation typ. > 25 (R1 // R2)
dB
> 28 (R1 // B1, B2)
per Port
Ports R1

617–746
Horizontal Pattern:
dB > 18 > 21
dB > 19 > 22
at Boresight
dB >9 > 13
over Sector
Vertical Pattern:
Electrical Downtilt
° 4.0 – 20.0
dB > 10 > 11
Suppression
Upper Side Lobe
above Main Beam
Cross Polar Isolation dB typ. > 25
dB
> 28 (R2 // B1, B2)
per Port
Ports R2
8-Port Antenna
80040064
Left side, highband B1, connector 5 – 6
1695–2200
Horizontal Pattern:
at Boresight
over Sector
Vertical Pattern:
Electrical Downtilt
8 Ports
° 4.0 – 14.0
Tilt Accuracy ° < 0.5 < 0.5 < 0.5
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation > 25 (B1 // B2)
dB > 28 (B1 // R1, R2)
per Port
Ports B1
Right side, highband B2, connector 7–8

1695–2200
Horizontal Pattern:
at Boresight
over Sector
Vertical Pattern:
Tilt Accuracy ° < 0.6 < 0.6 < 0.6
Suppression
Upper Side Lobe
above Main Beam
dB > 28 (B1 // R1, R2)
per Port
Ports B1
8-Port Antenna
80040064
Return Loss dB > 14 Adjustment Mechanism Non-Removable FlexRET,
Passive Intermodulation dBc < −153 (2 x 43 dBm carrier) continuously adjustable
Polarization ° +45, −45 Wind load (at Rated N | lbf Frontal: 760 | 171
Max. Effective Power 700 (at 50 °C ambient Wind Speed: 150 km/h) Maximal: 835 | 188
for the Antenna
Values based on NGMN-P-BASTA (version 10.0) requirements. mph 150
inches 47.2 / 22.7 / 6.5
Mounting Hardware
Weight (approx.) kg 33.8 / 40.7 (clamps, offset incl.)
lb 74.5 / 91.9 (clamps, offset incl.)
inches 55.1 / 23.6 / 8.7
Scope of Supply Panel, FlexRET, Offset
and 2 units of clamps
for 55– 115 mm |
Frequency Range 617–746 617–746 1695–2200 1695–2200
HPBW 65° 65° 65° 65°
8-Port Antenna 2LB/2HB 8ft 65°/60° | 2x617–746 16dBi | 2x1695–2200 18dBi

Type No. 80040066
617–746
Horizontal Pattern:
dB > 20 > 23
dB > 27 > 28
at Boresight
dB > 13.5 > 12.5
8 Ports
over Sector
Vertical Pattern:
Electrical Downtilt
° 1.0 – 10.0
dB > 15 > 19
Suppression
Upper Side Lobe
above Main Beam
dB
> 28 (R1 // B1, B2)
per Port
Ports R1

617–746
Horizontal Pattern:
Cross Polar Discrimination dB > 28 > 26
at Boresight
over Sector
Vertical Pattern:
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 28 (R2 // B1, B2)
per Port
Ports R2

8-Port Antenna
80040066
1695–2200
Horizontal Pattern:
at Boresight
Cross Polar Discrimination dB > 10.5 > 13.5 > 13.0
over Sector
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.2 < 0.2
Suppression
Upper Side Lobe
above Main Beam
dB
typ. > 28 (B1 // R1, R2)
per Port
Ports B1

1695–2200
Horizontal Pattern:
at Boresight
over Sector
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.3 < 0.3
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB typ. > 28 (B2 // R1, R2)
per Port
Ports B2
8-Port Antenna
80040066
Return Loss dB > 14 Adjustment Mechanism Non-Removable FlexRET,
Passive Intermodulation dBc < −153 (2 x 43 dBm carrier) Wind load (at Rated N | lbf Frontal 1590 | 357
Polarization ° +45, −45 Wind Speed: 150 km/h) Rearside 1750 | 393
for the Antenna
inches 94.4 / 22.7 / 6.5
Mounting Hardware
8 Ports
inches 102.4 / 23.6 / 8.7
Scope of Supply Panel, FlexRET, Offset
and 2 units of clamps
for 55–115 mm |
8-Port Antenna R1 R2 Y1 Y2
Frequency Range 698–803 824–960 1695–2690 1695–2690
HPBW 65° 65° 65° 65°
8-Port Antenna 2LB/2HB 1.4m 65° | 698–803 14dBi | 824–960 14.5dBi | 2x1695–2690 18dBi
Type No. 80010767
Left side, lowbands R1, connector 1– 2 R2, connector 3 –4
698–803 824–960
Horizontal Pattern:
at Boresight
over Sector
Azimuth Beam dB < 1.5 < 2.0 < 2.0
Vertical Pattern:
Tilt Accuracy ° < 0.7 < 0.7 < 0.6
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation > 28 (R1 // R2) > 28 (R2 // R1, Y2)
dB > 30 (R1 // Y1, Y2) > 30 (R2 // Y1)
Ports R1 + R2

1695–2690
Horizontal Pattern:
Cross Polar Discrimination dB > 17 > 23 > 25 > 18 > 17
at Boresight
over Sector
Azimuth Beam dB < 1.5 < 1.5 < 1.0 < 2.5 < 2.0
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.2 < 0.2
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (Y1 // Y2, R1, R2)
per Port
Ports Y1
8-Port Antenna
80010767
Right side, highband Y2, connector 7– 8
1695–2690
Horizontal Pattern:
at Boresight
over Sector
Azimuth Beam dB < 1.0 < 1.0 < 1.0 < 1.0 < 2.0
Vertical Pattern:
8 Ports
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.3 < 0.3
Suppression
Upper Side Lobe
above Main Beam
dB > 30 (Y2 // Y1, R1)
per Port
Ports Y2

for the Antenna
inches
Mounting Hardware
inches 65.2 / 15.6 / 8.3
2 units of clamps
for 42 –115 mm |
Frequency Range 698–803 824–960 1695–2690 1695–2690
HPBW 65° 65° 65° 65°
8-Port Antenna 2LB/2HB 1.9m 65° | 698–803 15dBi | 824–960 16dBi | 2x1695–2690 18dBi
Type No. 80010768
698–803 824–960
Horizontal Pattern:
dB > 21 > 26 > 26
dB > 24 > 24 > 23
at Boresight
dB > 7.0 > 7.0 > 6.5
over Sector
Azimuth Beam
dB < 1.5 < 1.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0 2.0 – 12.0
Tilt Accuracy ° < 0.5 < 0.5 < 0.4
dB > 16 > 19 > 20
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation > 28 (R1 // R2) > 28 (R2 // R1)
dB > 30 (R1 // Y1, Y2) > 30 (R2 // Y1, Y2)
Ports R1 + R2

1695–2690
Horizontal Pattern:
Front-to-Back Ratio, > 24 > 27 > 27 > 24 > 24
dB
Cross Polar Discrimination > 16 > 21 > 25 > 18 > 16
dB
at Boresight
Cross Polar Discrimination > 7.5 > 7.5 > 10.0 > 8.5 > 9.5
dB
over Sector
Azimuth Beam < 2.0 < 2.0 < 2.0 < 1.5 < 2.5
dB
Vertical Pattern:
°
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
First Upper Side Lobe > 19 > 18 > 18 > 17 > 17
dB
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (Y1 // R1, R2, Y2)
Max. Effective Power 200 (at 50 °C ambient temperature)
W
per Port
W
Ports Y1
8-Port Antenna
80010768
1695–2690
Horizontal Pattern:
Front-to-Back Ratio, > 23 > 23 > 24 > 24 > 24
dB
Cross Polar Discrimination > 22 > 22 > 21 > 18 > 16
dB
at Boresight
Cross Polar Discrimination > 15.5 > 15.0 > 13.0 > 7.5 > 8.5
dB
over Sector
Azimuth Beam < 1.5 < 1.0 < 1.0 < 2.0 < 2.5
dB
Vertical Pattern:
8 Ports
°
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.3 < 0.2
First Upper Side Lobe > 18 > 21 > 20 > 17 > 19
dB
Suppression
Upper Side Lobe
above Main Beam
W
per Port
W
Ports Y2

for the Antenna
inches
Mounting Hardware
inches 83.5 / 15.6 / 8.3
2 units of clamps
for 42 –115 mm |
Frequency Range 698–803 824–960 1695–2690 1695–2690
HPBW 65° 65° 65° 65°
8-Port Antenna 2LB/2HB 2.4m 65° | 698–803 16dBi | 824–960 17dBi | 2x1695–2690 18dBi
Type No. 80010769
698–803 824–960
Horizontal Pattern:
at Boresight
Cross Polar Discrimination dB >7 > 8.5 > 9.5
over Sector
Azimuth Beam dB < 2.0 < 2.0 < 2.0
Vertical Pattern:
Tilt Accuracy ° < 0.4 < 0.2 < 0.2
Suppression
Upper Side Lobe
above Main Beam
dB > 30 (R1 // Y1, Y2) > 30 (R2 // Y1, Y2)
Ports R1 + R2

1695–2690
Horizontal Pattern:
at Boresight
over Sector
Azimuth Beam dB < 2.0 < 2.0 < 2.0 < 1.5 < 2.0
Vertical Pattern:
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.1 < 0.1
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y1
8-Port Antenna
80010769
1695–2690
Horizontal Pattern:
at Boresight
over Sector
Azimuth Beam dB < 1.0 < 1.0 < 1.0 < 1.5 < 2.5
Vertical Pattern:
8 Ports
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.3 < 0.2
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y2

for the Antenna
inches
Mounting Hardware
inches 104.0 / 15.6 / 8.3
2 units of clamps
for 42 –115 mm |
Frequency Range 698–862 880–960 1695–2690 1695–2690
HPBW 65° 65° 65° 65°
8-Port Antenna 2LB/2HB 1.5m 65° | 698–862 14.5dBi | 880–960 15dBi | 2x1695–2690 18dBi
Type No. 80010867
698–862 880–960
Horizontal Pattern:
at Boresight
over Sector
Azimuth Beam dB < 1.5 < 1.5 < 2.0
Vertical Pattern:
Tilt Accuracy ° < 0.7 < 0.7 < 0.4
Suppression
Upper Side Lobe
above Main Beam
dB
> 30 (R1 // Y1, Y2) > 30 (R2 // Y1)
Ports R1 + R2

1695–2690
Horizontal Pattern:
dB > 25 > 26 > 25 > 24 > 24
dB > 17 > 23 > 25 > 20 > 18
at Boresight
dB > 8.5 > 10.5 > 11.0 > 8.5 > 9.0
over Sector
Azimuth Beam
dB < 1.5 < 1.5 < 1.5 < 2.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.2 < 0.2 < 0.2
dB > 18 > 18 > 19 > 16 > 17
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y1
8-Port Antenna
80010867
1695–2690
Horizontal Pattern:
dB > 25 > 24 > 25 > 26 > 25
dB > 23 > 25 > 24 > 20 > 20
at Boresight
dB > 15.5 > 17.5 > 14.5 > 8.0 > 8.0
over Sector
Azimuth Beam
dB < 1.0 < 1.0 < 1.0 < 1.0 < 2.0
Vertical Pattern:
8 Ports
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.3 < 0.3
dB > 17 > 19 > 19 > 17 > 17
Suppression
Upper Side Lobe
above Main Beam
dB > 30 (Y2 // R1, Y1)
per Port
Ports Y2

for the Antenna
inches 57.4 / 14.8 / 6.7
Mounting Hardware
inches 65.3 / 15.6 / 8.3
2 units of clamps
for 42–115 mm |
Frequency Range 698–862 880–960 1695–2690 1695–2690
HPBW 65° 65° 65° 65°
Type No. 80010868
698–862 880–960
Horizontal Pattern:
over Sector
Azimuth Beam dB < 2.0 < 2.5 < 2.5
Vertical Pattern:
Tilt Accuracy ° < 0.5 < 0.4 < 0.3
Suppression
Upper Side Lobe
above Main Beam
dB > 30 (R1 // Y1, Y2) > 30 (R2 // Y1, Y2)
Ports R1 + R2

1695–2690
Horizontal Pattern:
dB > 26 > 26 > 26 > 24 > 24
dB > 8.0 > 8.0 > 9.5 > 9.0 > 10.0
over Sector
Azimuth Beam
dB < 2.0 < 2.0 < 1.5 < 1.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
dB > 19 > 19 > 18 > 17 > 18
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y1
8-Port Antenna
80010868
1695–2690
Horizontal Pattern:
dB > 24 > 23 > 24 > 23 > 25
dB > 15.5 > 14.5 > 13.0 > 7.5 > 9.0
over Sector
Azimuth Beam
dB < 1.0 < 1.0 < 1.0 < 2.0 < 2.0
Vertical Pattern:
Electrical Downtilt
8 Ports
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
dB > 20 > 21 > 22 > 17 > 20
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y2

for the Antenna
inches 75.6 / 14.8 / 6.7
Mounting Hardware
inches 83.5 / 15.6 / 8.3
2 units of clamps
for 42–115 mm |
Frequency Range 698–862 880–960 1695–2690 1695–2690
HPBW 65° 65° 65° 65°
Type No. 80010869
698–862 880–960
Horizontal Pattern:
over Sector
Azimuth Beam dB < 2.0 < 2.5 < 2.0
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.3 < 0.2
Suppression
Upper Side Lobe
above Main Beam
dB > 30 (R1 // Y1, Y2) > 30 (R2 // Y1, Y2)
Ports R1 + R2

1695–2690
Horizontal Pattern:
dB > 26 > 26 > 26 > 24 > 24
dB > 8.0 > 9.0 > 10.0 > 9.0 > 9.5
over Sector
Azimuth Beam
dB < 2.0 < 2.0 < 1.5 < 1.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
dB > 19 > 18 > 18 > 17 > 18
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y1
8-Port Antenna
80010869
1695–2690
Horizontal Pattern:
dB > 23 > 23 > 24 > 24 > 25
dB > 15.5 > 15.0 > 13.5 > 8.0 > 9.5
over Sector
Azimuth Beam
dB < 1.0 < 1.0 < 1.0 < 1.5 < 2.0
Vertical Pattern:
Electrical Downtilt
8 Ports
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.2 < 0.2 < 0.3 < 0.2
dB > 20 > 21 > 22 > 18 > 20
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y2

for the Antenna
inches 96.1 / 14.8 / 6.7
Mounting Hardware
inches 104.0 / 15.6 / 8.3
2 units of clamps
for 42–115 mm |
Frequency Range 698–862 880–960 1695–2690 1427–2690
HPBW 65° 65° 65° 65°
8-Port Antenna 2LB/2HB 1.5m 65° | 698–862 14.5dBi | 880–960 15dBi |

1695–2690 18dBi | 1427–2690 18dBi
Type No. 80011867
Left side, lowbands R1, connector 1–2 R2, connector 3–4
698–862 880–960
Horizontal Pattern:
Vertical Pattern:
Tilt Accuracy ° < 0.6 < 0.5 < 0.6
dB > 15 > 16 > 14
Suppression
dB > 30 (R1 // Y1, Y2) > 30 (R2 // Y1, Y2)
Ports R1 + R2

1695–2690
Horizontal Pattern:
dB > 25 > 28 > 28 > 26 > 23
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.2 < 0.2 < 0.2
dB > 16 > 19 > 19 > 17 > 16
Suppression
per Port
Ports Y1
8-Port Antenna
80011867
1427–2690
Frequency Range MHz 1427 – 1496 1492 – 1518 1695 – 1880 1850 – 1990 1920 – 2180 2300 – 2400 2490 – 2690
Gain at mid Tilt dBi 16.3 16.5 17.3 17.7 17.9 17.9 18.2
Gain over all Tilts dBi 16.3 ± 0.3 16.5 ± 0.2 17.3 ± 0.3 17.6 ± 0.3 17.9 ± 0.3 17.9 ± 0.4 18.0 ± 0.6
Horizontal Pattern:
Azimuth Beamwidth ° 73 ± 6.0 67 ± 5.1 67 ± 4.5 66 ± 3.4 66 ± 2.8 68 ± 2.9 62 ± 6.0
dB > 25 > 24 > 26 > 26 > 26 > 27 > 24
Vertical Pattern:
Elevation Beamwidth ° 8.6 ± 0.3 8.6 ± 0.2 7.2 ± 0.4 6.7 ± 0.3 6.3 ± 0.5 5.6 ± 0.4 5.1 ± 0.4
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.6 < 0.6 < 0.6 < 0.7 < 0.6
dB > 19 > 19 > 19 > 20 > 20 > 16 > 15
Suppression
8 Ports
Port to Port Isolation > 28 (Y2 // Y1)
dB > 30 (Y2 // R1, R2, Y1)
> 30 (Y2 // R1, R2)
Max. Effective Power per 150 (at 50 °C ambient 120 (at 50 °C ambient
specified Band and Port W 200 (at 50 °C ambient temperature)
temperature) temperature)
per Port
Ports Y2

Passive Intermodulation dBc < −153 (2 x 43 dBm carrier)* Wind load (at Rated N | lbf Frontal: 665 | 149
for the Antenna
* not applicable for L-band inches 59.0 / 14.9 / 6.5
Mounting Hardware
inches 66.2 / 15.8 / 9.8
for 55–115 mm |
gory of
The “Cate ware”
H ard
h a n g e
will c 19
during 20
Frequency Range 698–862 880–960 1695–2690 1427–2690
HPBW 65° 65° 65° 65°

1695–2690 18dBi | 1427–2690 18dBi
Type No. 80011868
Left side, lowbands R1, connector 1–2 R2, connector 3–4
698–862 880–960
Horizontal Pattern:
Vertical Pattern:
Tilt Accuracy ° < 0.5 < 0.5 < 0.4
dB > 16 > 19 > 21
Suppression
Upper Side Lobe
above Main Beam
dB > 30 (R1 // Y1, Y2) > 30 (R2 // Y1, Y2)
Ports R1 + R2

1695–2690
Horizontal Pattern:
dB > 25 > 27 > 25 > 24 > 24
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.3 < 0.3
dB > 18 > 17 > 16 > 17 > 16
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y1
8-Port Antenna
80011868
1427–2690
Horizontal Pattern:
dB > 25 > 24 > 26 > 26 > 26 > 27 > 24
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.6 < 0.6 < 0.6 < 0.7 < 0.6
dB > 19 > 19 > 19 > 20 > 20 > 16 > 15
Suppression
8 Ports
Upper Side Lobe
Suppression, 20° Sector dB > 15 > 18 > 18 > 19 > 19 > 16 > 15
above Main Beam
Port to Port Isolation > 28 (Y2 // Y1)
dB > 30 (Y2 // R1, R2, Y1)
> 30 (Y2 // R1, R2)
per Port
Ports Y2

for the Antenna
Mounting Hardware
inches 86.6 / 15.1 / 10.0
for 55–115 mm |
gory of
The “Cate ware”
H ard
h a n g e
will c 19
during 20
Frequency Range 790–960 790–960 1710–2180 1710–2180
HPBW 65° 65° 60° 60°
8-Port Antenna 2LB/2HB 1.9m 65°/60° | 2x790–960 16dBi | 2x1710–2180 18.5dBi

Type No. 80010825
790–960
Horizontal Pattern:
at Boresight
over Sector
Vertical Pattern:
Tilt Accuracy ° < 0.2 < 0.3 < 0.4
Suppression
Port to Port Isolation dB > 30 (R1 // R2, B1, B2)
per Port
Ports R1

790–960
Horizontal Pattern:
at Boresight
over Sector
Vertical Pattern:
Tilt Accuracy ° < 0.3 < 0.2 < 0.4
Suppression
Port to Port Isolation dB > 30 (R2 // R1, B1, B2)
per Port
Ports R2
8-Port Antenna
80010825
1710–2180
Horizontal Pattern:
at Boresight
over Sector
Vertical Pattern:
Electrical Downtilt
8 Ports
° 0.0 – 6.0
Tilt Accuracy ° < 0.3 < 0.2 < 0.3
Suppression
Port to Port Isolation dB > 30 (B1 // R1, R2, B2)
per Port
Ports B1

1710–2180
Horizontal Pattern:
at Boresight
over Sector
Vertical Pattern:
Tilt Accuracy ° < 0.2 < 0.3 < 0.3
Suppression
Port to Port Isolation dB > 30 (B2 // R1, R2, B1)
per Port
Ports B2

8-Port Antenna
80010825
for the Antenna
inches 76.1 / 22.7 / 5.2
Mounting Hardware
inches 86.7 / 25.0 / 6.3
for 42 –115 mm |
Frequency Range 790–960 790–960 1710–2180 1710–2180
HPBW 65° 65° 60° 60°
8-Port Antenna 2LB/2HB 2.4m 65°/60° | 2x790–960 17dBi | 2x1710–2180 18.5dBi

Type No. 80010826
Lowbands R1 R2
790–960 790–960
Horizontal Pattern:
Front-to-Back Ratio, dB
> 26 > 27 > 28 > 25 > 26 > 27
Cross Polar Discrimination dB
> 31 > 32 > 29 > 30 > 30 > 29
at Boresight
> 15.0 > 13.5 > 12.0 > 15.0 > 14.0 > 11.5
8 Ports
over Sector
Azimuth Beam dB
< 1.5 < 1.5 < 1.5 < 1.5 < 1.5 < 1.5
Vertical Pattern:
Electrical Downtilt °
0.0 – 8.0 0.0 – 8.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.3 < 0.2 < 0.2 < 0.3
First Upper Side Lobe dB
> 16 > 17 > 16 > 16 > 17 > 16
Suppression
Port to Port Isolation dB > 30 (R1 // R2 // B1 // B2) > 30 (R1 // R2 // B1 // B2)
Max. Effective Power W 400 (at 50 °C ambient temperature) 400 (at 50 °C ambient temperature)
per Port
Highbands B1 B2
1710–2180 1710–2180
Horizontal Pattern:
Front-to-Back Ratio, dB
> 26 > 25 > 24 > 25 > 26 > 26
> 28 > 28 > 24 > 28 > 27 > 24
at Boresight
> 16.0 > 15.5 > 10.0 > 15.0 > 14.5 > 9.5
over Sector
Azimuth Beam dB
< 0.5 < 1.0 < 1.5 < 0.5 < 1.0 < 1.5
Vertical Pattern:
Electrical Downtilt °
0.0 – 6.0 0.0 – 6.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.3 < 0.2 < 0.2
First Upper Side Lobe dB
> 14 > 14 > 14 > 14 > 15 > 15
Suppression
Port to Port Isolation dB > 30 (R1 // R2 // B1 // B2) > 30 (R1 // R2 // B1 // B2)
Max. Effective Power W 250 (at 50 °C ambient temperature) 250 (at 50 °C ambient temperature)
per Port

8-Port Antenna
80010826
for the Antenna
inches 94.4 / 22.7 / 5.2
Mounting Hardware
inches 101.4 / 23.6 / 6.7
for 42 –115 mm |
Frequency Range 698–960 698–960 1695–2690 1695–2690
HPBW 65° 65° 65° 65°
8-Port Antenna 2LB/2HB 1.5m 65° | 2x 698–960 14dBi | 2x 1695–2690 17.5dBi

Type No. 80010964
698 – 960
Horizontal Pattern:
dB > 22 > 23 > 25 > 25
Vertical Pattern:
Electrical Downtilt
8 Ports
° 2.0 – 16.0
Tilt Accuracy ° < 0.7 < 0.7 < 0.8 < 0.8
dB > 17 > 16 > 15 > 15
Suppression
Port to Port Isolation > 26, typically 30 (R1 // R2)
dB
> 30 (R1 // Y1, Y2)
per Port
Ports R1

698 – 960
Horizontal Pattern:
dB > 21 > 24 > 26 > 26
Vertical Pattern:
Electrical Downtilt
° 2.0 – 16.0
Tilt Accuracy ° < 1.1 < 0.8 < 0.8 < 1.1
dB > 18 > 15 > 15 > 16
Suppression
dB > 30 (R2 // Y1)
> 27, typically 30 (R2 // Y2)
per Port
Ports R2

8-Port Antenna
80010964
1695 – 2690
Horizontal Pattern:
dB > 24 > 25 > 25 > 27 > 23
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.3 < 0.4 < 0.4
dB > 16 > 17 > 16 > 15 > 14
Suppression
Cross Polar Isolation dB > 26, typically 30
per Port
Ports Y1

1695 – 2690
Horizontal Pattern:
dB > 24 > 25 > 25 > 26 > 22
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
dB > 16 > 16 > 15 > 16 > 14
Suppression
per Port
Ports Y2
8-Port Antenna
80010964
for the Antenna
inches 59.0 / 20.0 / 6.9
Mounting Hardware
8 Ports
inches 66.9 / 21.3 / 10.6
clamps for 55–115 mm |
gory of
The “Cate ware”
n ti n g H ard
Mou ”
ge to “XM
will chan 0 19
during 2
Frequency Range 698–960 698–960 1695–2690 1695–2690
HPBW 65° 65° 65° 65°
8-Port Antenna 2LB/2HB 2.0m 65° | 2x698–960 15.5dBi | 2x1695–2690 18dBi

Type No. 80010965
698–960
Horizontal Pattern:
dB > 22 > 25 > 27 > 25
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.7 < 0.7 < 0.7 < 0.7
dB > 14 > 14 > 15 > 14
Suppression
dB
> 30 (R1 // Y1, Y2)
per Port
Ports R1

698–960
Horizontal Pattern:
dB > 22 > 24 > 26 > 27
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.7 < 0.6 < 0.6 < 0.5
dB > 14 > 16 > 16 > 16
Suppression
dB
> 30 (R2 // Y1, Y2)
per Port
Ports R2
8-Port Antenna
80010965
1695–2690
Horizontal Pattern:
Total Power, ± 30° dB > 22 > 25 > 25 > 25 > 25
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.1 < 0.2 < 0.3 < 0.2
dB > 19 > 18 > 16 > 18 > 16
8 Ports
Suppression
per Port
Ports Y1

1695–2690
Horizontal Pattern:
dB > 24 > 26 > 26 > 25 > 24
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.3 < 0.2
dB > 18 > 18 > 15 > 17 > 16
Suppression
per Port
Ports Y2

8-Port Antenna
80010965
for the Antenna
inches 78.7 / 20.0 / 6.9
Mounting Hardware
inches 86.6 / 21.3 / 10.6
gory of
The “Cate ware”
n ti n g H ard
Mou ”
ge to “XM
will chan 0 19
during 2
Frequency Range 698–960 698–960 1695–2690 1695–2690
HPBW 65° 65° 65° 65°
8-Port Antenna 2LB/2HB 2.4m 65° | 2x698–960 16.5dBi | 2x1695–2690 18dBi

Type No. 80010966
698–960
Horizontal Pattern:
dB > 23 > 23 > 24 > 25
dB > 10.0 > 9.5 > 10.0 > 11.5
over Sector
Vertical Pattern:
8 Ports
Electrical Downtilt
° 1.0 – 10.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.4
dB > 16 > 18 > 18 > 20
Suppression
dB
> 30 (R1 // Y1, Y2)
per Port
Ports R1

698–960
Horizontal Pattern:
dB > 22 > 23 > 24 > 26
dB > 9.5 > 10.5 > 10.0 > 11.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 1.0 – 10.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.3
dB > 18 > 21 > 20 > 20
Suppression
dB
> 30 (R2 // Y1, Y2)
per Port
Ports R2

8-Port Antenna
80010966
1695–2690
Horizontal Pattern:
dB > 24 > 26 > 26 > 25 > 24
dB > 8.5 > 11.5 > 10.0 > 7.5 > 9.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
dB > 19 > 19 > 17 > 19 > 17
Suppression
per Port
Ports Y1

1695–2690
Horizontal Pattern:
dB > 25 > 24 > 25 > 27 > 25
dB > 9.5 > 11.0 > 10.0 > 9.5 > 10.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.2 < 0.1
dB > 19 > 18 > 18 > 19 > 18
Suppression
per Port
Ports Y2
8-Port Antenna
80010966
for the Antenna
inches 96.0 / 20.0 / 6.9
Mounting Hardware
lb 114.6 / 125.7 (clamps incl.)
8 Ports
inches 103.7 / 21.3 / 10.6
clamps for 55– 115 mm |
8-Port Antenna B1 B2 Y1 Y2
Frequency Range 1710–2170 1710–2170 2490–2690 2490–2690
HPBW 65° 65° 60° 60°
8-Port Antenna 4HB 1.5m 65° | 2x1710–2170 17.5dBi | 2x2490–2690 18dBi

Type No. 80010728
B1, connector 1– 2 Y1, connector 5 – 6
1710–2170 2490–2690
Horizontal Pattern:
dB > 26 > 26 > 26 > 24
dB > 22 > 22 > 22 > 25
at Boresight
dB > 13.5 > 12.5 > 10.5 > 9.5
over Sector
Azimuth Beam
dB < 1.5 < 1.5 < 1.0 < 1.0
Vertical Pattern:
Electrical Downtilt
° 2.0 – 11.0 2.0 – 14.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.2
dB > 18 > 18 > 17 > 16
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (B1 // B2, Y1, Y2) > 30 (Y1 // B1, B2, Y2)
Ports B1 + Y1
8-Port Antenna
80010728
B2, connector 3 –4 Y2, connector 7–8
1710–2170 2490–2690
Horizontal Pattern:
dB > 25 > 26 > 26 > 23
dB > 21 > 21 > 21 > 23
at Boresight
dB > 14.5 > 12.0 > 11.0 > 9.0
over Sector
Azimuth Beam
dB < 1.5 < 1.0 < 0.5 < 1.5
Vertical Pattern:
8 Ports
Electrical Downtilt
° 2.0 – 11.0 2.0 – 14.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.3
dB > 17 > 17 > 16 > 16
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (B2 // B1, Y1, Y2) > 30 (Y2 // B1, B2, Y1)
Ports B2 + Y2

for the Antenna
inches 57.9 / 10.8 / 4.1
Mounting Hardware
inches 65.6 / 11.7 / 5.4
2 units of clamps
for 42 –115 mm |
10 Ports
10-Port Antenna 698–960 65° 15.3dBi 2°–12°T 84510891 1995 4.3-10, bottom 136 AL
1695–2690 65° 16dBi 2°–12°T –
1695–2690 65° 16dBi 2°–12°T 138
1695–2690 65° 16.5dBi 2°–12°T
1695–2690 65° 16dBi 2°–12°T
10-Port Antenna 698–960 65° 16dBi 2°–12°T 80011891 1999 4.3-10, bottom 139 X
1695–2690 65° 16dBi 2°–14°T –
1695–2690 65° 16dBi 2°–14°T 141
1427–2690 65° 16.5dBi 2°–14°T
1695–2690 65° 16.5dBi 2°–14°T
10-Port Antenna 698–960 65° 16dBi 2°–12°T 80010875 1921 7-16, bottom 142 Y
1695–2180 65° 17.5dBi 2.5°–12°T +
2490–2690 65° 17.5dBi 2.5°–12°T 143
1695–2180 65° 17.5dBi 2.5°–12°T
2490–2690 65° 18dBi 2.5°–12°T
10-Port Antenna 698–960 65° 16dBi 2°–12°T 80010891 1995 4.3-10, bottom 144 X
1695–2690 65° 16dBi 2°–14°T –
1695–2690 65° 16dBi 2°–14°T 146
1695–2690 65° 17dBi 2°–14°T
1695–2690 65° 16.5dBi 2°–14°T
10-Port Antenna 698–960 65° 16.5dBi 1°–10°T 84510892 2697 4.3-10, bottom 147 AH
1695–2690 65° 17dBi 2°–12°T –
1695–2690 65° 17dBi 2°–12°T 149
1695–2690 65° 17dBi 2°–12°T
1695–2690 65° 17dBi 2°–12°T
10-Port Antenna 698–960 65° 17dBi 1.5°–10°T 80020892 2693 4.3-10, bottom 150 X
1695–2690 65° 17.5dBi 2.5°–12°T –
1695–2690 65° 17dBi 2.5°–12°T 152
1695–2690 65° 18dBi 2.5°–12°T
1695–2690 65° 17.5dBi 2.5°–12°T
Type X Type Y Type AH Type AL
Y1 Y2
R1
R1
Y2 Y4 2x
Y1 Y4 Y2 Y4
Y1 Y3 B1 B2
R1 R1 Y2 R1 Y3 Y1 R1 Y3
Left Right Left Right Left Center Right Left Center Right
134
10 Ports
10-Port Antenna 698–960 65° 15.5dBi 2°–12°T 80011965 1999 4.3-10, bottom 153 AI
698–960 65° 15.5dBi 2°–12°T –
1427–1518 65° 17dBi 2.5°–12°T 155
1695–2690 65° 18dBi 2.5°–12°T
1695–2690 65° 18dBi 2.5°–12°T
10 Ports
Type AI
Y1 G1 Y2
R1 R2
Left Center Right
135
10-Port Antenna R1 Y1 Y2 Y3 Y4
Frequency Range 698–960 1695–2690 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65°
10-Port Antenna LB/4HB 2.0m 65° | 698–960 15.3dBi | 4x1695–2690 16dBi

Type No. 84510891
Horizontal Pattern:
dB > 27 > 27 > 27 > 26
dB 16.5 14.0 14.0 13.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.7 < 0.7 < 0.7 < 0.7
dB > 16 > 16 > 16 > 16
Suppression
Port to Port Isolation dB > 27 (R1 // Y1, Y2, Y3, Y4)
per Port
Ports R1
Left side, lower highband Y1, connector 3 – 4

1695–2690
Horizontal Pattern:
dB > 25 > 24 > 24 > 26 > 25
dB 10.5 10.5 11.0 12.0 8.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.6 < 0.5 < 0.5 < 0.7 < 0.4
dB > 16 > 17 > 17 > 18 > 16
Suppression
Port to Port Isolation dB > 27 (Y1 // R1, Y2, Y3, Y4)
per Port
Ports Y1
10-Port Antenna
84510891
Left side, upper highband Y2, connector 5 – 6
1695–2690
Horizontal Pattern:
dB > 25 > 25 > 25 > 26 > 26
dB 10.5 11.5 13.5 12.0 8.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.7 < 0.9 < 0.9 < 1.0 < 0.6
dB > 17 > 17 > 17 > 15 > 17
Suppression
Port to Port Isolation > 27 (Y2 // R1, Y1, Y3, Y4)
dB
10 Ports
per Port
Ports Y2
Right side, lower highband Y3, connector 7– 8

1695–2690
Horizontal Pattern:
dB > 25 > 25 > 24 > 25 > 26
dB 10.0 11.0 11.0 12.5 9.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.5 < 0.4 < 0.5 < 0.6 < 0.3
dB > 16 > 17 > 17 > 17 > 15
Suppression
per Port
Ports Y3

10-Port Antenna
84510891
Right side, upper highband Y4, connector 9 –10
1695–2690
Horizontal Pattern:
dB > 27 > 25 > 25 > 25 > 25
dB 10.5 12.0 13.5 12.5 8.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 1.1 < 1.0 < 1.0 < 0.6 < 0.7
dB > 16 > 16 > 16 > 17 > 14
Suppression
per Port
Ports Y4

for the Antenna
inches 78.5 / 13.9 / 6.5
Mounting Hardware
inches 87.0 / 14.8 / 8.3
2 units of clamps for
55–115 mm |
Frequency Range 698–960 1695–2690 1695–2690 1427–2690 1695–2690
HPBW 65° 65° 65° 65° 65°

5° | 698–960 16dBi | 3x1695–2690 16.5dBi |
1427–2690 16.5dBi
Type No. 80011891
698–960
Horizontal Pattern:
Vertical Pattern:
Tilt Accuracy ° < 0.5 < 0.5 < 0.5 < 0.4
dB > 16 > 19 > 19 > 21
Suppression
10 Ports
per Port
Ports R1

1695–2690
Horizontal Pattern:
dB > 24 > 25 > 25 > 25 > 25
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.3 < 0.4 < 0.3 < 0.4 < 0.3
dB > 21 > 21 > 20 > 16 > 15
Suppression
Cross Polar Isolation dB > 27, typ. 28
per Port
Ports Y1

10-Port Antenna
80011891
1695–2690
Horizontal Pattern:
dB > 23 > 26 > 26 > 25 > 26
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.5 < 0.4
dB > 17 > 19 > 19 > 20 > 19
Suppression
per Port
Ports Y2

1427–2690
Horizontal Pattern:
dB > 25 > 25 > 24 > 25 > 25 > 28 > 25
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.8 < 0.7 < 0.5 < 0.3 < 0.3 < 0.3 < 0.5
dB > 14 > 15 > 15 > 17 > 18 > 18 > 14
Suppression
per Port
Ports Y3
10-Port Antenna
80011891
1695–2690
Horizontal Pattern:
dB > 25 > 24 > 25 > 25 > 21
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.5 < 0.4 < 0.4
dB > 18 > 18 > 17 > 17 > 16
Suppression
per Port
10 Ports
Ports Y4

Interband Isolation dB > 27, typ. 28 continuously adjustable
for the Antenna
Category of XM (X-medium)
Mounting Hardware
inches 86.6 / 16.2 / 10.0
for 55–115 mm |
10-Port Antenna R1 B1 Y1 B2 Y2
Frequency Range 698–960 1695–2180 2490–2690 1695–2180 2490–2690
HPBW 65° 65° 65° 65° 65°

5° | 698–960 16dBi | 2x1695–2180 17.5dBi |
2x2490–2690 18dBi
Type No. 80010875
698–960
Horizontal Pattern:
dB > 22 > 24 > 25 > 26
dB > 21 > 21 > 21 > 20
at Boresight
dB > 7.5 > 7.5 > 8.0 > 8.5
over Sector
Azimuth Beam
dB < 1.5 < 2.0 < 2.0 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.5 < 0.5 < 0.4 < 0.4
dB > 15 > 18 > 17 > 17
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (R1 // B1, Y1, B2, Y2)
per Port
Ports R1
Left side, highbands B1, connector 3 – 4 Y1, connector 7–8

1695–2180 2490–2690
Horizontal Pattern:
dB > 26 > 27 > 27 > 25
dB > 16 > 22 > 25 > 17
at Boresight
dB > 7.0 > 8.0 > 9.5 > 10.0
over Sector
Azimuth Beam
dB < 2.0 < 1.5 < 2.0 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.3 < 0.2
dB > 19 > 18 > 18 > 17
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (B1 // R1, Y1, B2, Y2) > 30 (Y1 // R1, B1, B2, Y2)
Ports B1 + Y1
10-Port Antenna
80010875
Right side, highbands B2, connector 5– 6 Y2, connector 9 –10
1695–2180 2490–2690
Horizontal Pattern:
dB > 26 > 27 > 27 > 24
dB > 22 > 22 > 21 > 16
at Boresight
dB > 15.5 > 16.0 > 14.0 > 9.0
over Sector
Azimuth Beam
dB < 1.5 < 0.5 < 0.5 < 3.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.3 < 0.2
dB > 18 > 18 > 18 > 15
Suppression
10 Ports
Upper Side Lobe
above Main Beam
Port to Port Isolation dB > 30 (B2 // R1, B1, Y1, Y2) > 30 (Y2 // R1, B1, Y1, B2)
Group of Ports 5+9 // 6+10
Max. Effective Power
Ports B2 + Y2

for the Antenna
inches 75.6 / 14.8 / 6.7
Mounting Hardware
inches 83.5 / 15.6 / 8.3
2 units of clamps
for 42 –115 mm |
Frequency Range 698–960 1695–2690 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65°

Type No. 80010891
698–960
Horizontal Pattern:
dB > 23 > 25 > 26 > 28
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.5 < 0.4 < 0.4 < 0.4
dB > 15 > 17 > 20 > 20
Suppression
Upper Side Lobe
above Main Beam
Port to Port Isolation > 28 (R1 // Y4)
dB
> 30 (R1 // Y1, Y2, Y3)
per Port
Ports R1

1695–2690
Horizontal Pattern:
dB > 23 > 25 > 25 > 25 > 25
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.3 < 0.4 < 0.3 < 0.4 < 0.3
dB > 20 > 21 > 19 > 16 > 15
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y1
10-Port Antenna
80010891
1695–2690
Horizontal Pattern:
dB > 23 > 26 > 26 > 25 > 26
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.5 < 0.4
dB > 17 > 19 > 19 > 20 > 18
Suppression
Upper Side Lobe
above Main Beam
10 Ports
per Port
Ports Y2

1695–2690
Horizontal Pattern:
dB > 23 > 23 > 24 > 24 > 23
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.5 < 0.4 < 0.3
dB > 17 > 18 > 19 > 19 > 18
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y3

10-Port Antenna
80010891
1695–2690
Horizontal Pattern:
dB > 25 > 24 > 25 > 25 > 21
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.5 < 0.4 < 0.4
dB > 18 > 18 > 17 > 17 > 16
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y4

for the Antenna
inches 78.5 / 14.8 / 6.7
Mounting Hardware
inches 86.5 / 15.6 / 8.3
2 units of clamps
for 42 –115 mm |
Frequency Range 698–960 1695–2690 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65°
10-Port Antenna LB/4HB 2.7m 65° | 698–960 16.5dBi | 4x1695–2690 17dBi

Type No. 84510892
Horizontal Pattern:
dB > 25 > 27 > 27 > 27
Total Power, ±30°
dB > 20 > 19 > 19 > 18
at Boresight
dB > 12 > 14 > 14 > 12
over Sector
Azimuth Beam
dB < 1.0 < 1.0 < 1.0 < 1.0
Vertical Pattern:
Electrical Downtilt
° 1 – 10
10 Ports
Tilt Accuracy ° < 0.3 < 0.3 < 0.2 < 0.3
dB > 16 > 16 > 16 > 16
Suppression
per Port
Ports R1

1695–2690
Horizontal Pattern:
dB > 26 > 25 > 24 > 26 > 26
Total Power, ±30°
dB > 21 > 23 > 21 > 18 > 19
at Boresight
dB > 10 >9 >8 > 10 >6
over Sector
Azimuth Beam
dB < 2.0 < 3.0 < 4.0 < 3.0 < 3.5
Vertical Pattern:
Electrical Downtilt
° 2 – 12
Tilt Accuracy ° < 0.5 < 0.4 < 0.4 < 0.5 < 0.4
dB > 16 > 17 > 17 > 17 > 16
Suppression
per Port
Ports Y1

10-Port Antenna
84510892
1695–2690
Horizontal Pattern:
dB > 25 > 25 > 24 > 26 > 25
Total Power, ±30°
dB > 20 > 21 > 19 > 18 > 20
at Boresight
dB > 10 >9 >8 >9 >7
over Sector
Azimuth Beam
dB < 1.5 < 2.5 < 3.5 < 2.5 < 3.0
Vertical Pattern:
Electrical Downtilt
° 2 – 12
Tilt Accuracy ° < 1.1 < 1.0 < 1.0 < 0.9 < 0.8
dB > 17 > 18 > 17 > 17 > 17
Suppression
per Port
Ports Y2

1695–2690
Horizontal Pattern:
dB > 25 > 25 > 24 > 26 > 25
Total Power, ±30°
dB > 24 > 21 > 18 > 17 > 18
at Boresight
dB > 12 >9 >8 >9 >6
over Sector
Azimuth Beam
dB < 2.0 < 2.0 < 4.0 < 2.5 < 2.5
Vertical Pattern:
Elevation Beamwidth ° 7.4 ± 0.6 6.8 ± 0.4 6.5 ± 0.6 5.6 ± 0.6 5.1± 0.4
Electrical Downtilt
° 2 – 12
Tilt Accuracy ° < 0.5 < 0.4 < 0.4 < 0.4 < 0.5
dB > 16 > 17 > 17 > 15 > 15
Suppression
per Port
Ports Y3
10-Port Antenna
84510892
1695–2690
Horizontal Pattern:
dB > 26 > 25 > 24 > 26 > 25
Total Power, ±30°
dB > 21 > 20 > 19 > 17 > 19
at Boresight
dB > 11 >9 >7 > 10 >5
over Sector
Azimuth Beam
dB < 1.5 < 2.5 < 4.5 < 2.5 < 3.5
Vertical Pattern:
Electrical Downtilt
° 2 – 12
Tilt Accuracy ° < 1.1 < 1.0 < 1.0 < 0.8 < 0.8
dB > 16 > 17 > 17 > 15 > 15
Suppression
10 Ports
per Port
Ports Y4

for the Antenna
inches 106.2 / 13.9 / 6.5
Mounting Hardware
inches 114.6 / 14.8 / 8.3
2 units of clamps for
55–115 mm |
Frequency Range 698–960 1695–2690 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65°

Type No. 80020892
698–960
Horizontal Pattern:
dB > 23 > 24 > 25 > 26
dB > 23 > 23 > 23 > 22
at Boresight
dB > 7.5 > 7.5 > 8.0 > 7.5
over Sector
Azimuth Beam
dB < 1.5 < 2.0 < 2.0 < 2.0
Vertical Pattern:
Electrical Downtilt
° 1.5 – 10.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.2
dB > 16 > 16 > 16 > 15
Suppression
per Port
Ports R1

1695–2690
Horizontal Pattern:
dB > 24 > 24 > 24 > 21 > 23
dB > 16 > 22 > 22 > 19 > 19
at Boresight
dB > 8.0 > 10.0 > 11.5 > 9.5 > 8.5
over Sector
Azimuth Beam
dB < 1.5 < 2.0 < 2.0 < 2.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.4 < 0.4 < 0.3
dB > 15 > 15 > 15 > 14 > 14
Suppression
dB
> 30 (Y1 // Y2, Y3, Y4)
per Port
Ports Y1
10-Port Antenna
80020892
1695–2690
Horizontal Pattern:
dB > 22 > 24 > 24 > 22 > 22
dB > 16 > 23 > 22 > 19 > 19
at Boresight
dB > 7.5 > 9.5 > 12.0 > 8.5 > 8.5
over Sector
Azimuth Beam
dB < 1.5 < 2.0 < 2.0 < 1.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.4 < 0.3 < 0.3 < 0.3 < 0.3
dB > 16 > 17 > 16 > 15 > 15
Suppression
10 Ports
dB
> 30 (Y2 // Y1, Y3, Y4)
per Port
Ports Y2

1695–2690
Horizontal Pattern:
dB > 22 > 22 > 23 > 22 > 25
dB > 16 > 20 > 18 > 16 > 18
at Boresight
dB > 11.0 > 14.0 > 14.5 > 11.5 > 9.5
over Sector
Azimuth Beam
dB < 1.5 < 1.0 < 0.5 < 1.0 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.4 < 0.3
dB > 18 > 24 > 23 > 19 > 21
Suppression
dB
> 30 (Y3 // Y1, Y2, Y4)
per Port
Ports Y3

10-Port Antenna
80020892
1695–2690
Horizontal Pattern:
dB > 22 > 24 > 24 > 25 > 26
dB > 15 > 19 > 18 > 16 > 18
at Boresight
dB > 10.0 > 14.5 > 14.5 > 11.5 > 9.0
over Sector
Azimuth Beam
dB < 1.0 < 1.0 < 0.5 < 0.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.3 < 0.2
dB > 19 > 24 > 23 > 20 > 19
Suppression
dB
> 30 (Y4 // Y1, Y2, Y3)
per Port
Ports Y4

for the Antenna
inches 106.0 / 14.8 / 6.7
Mounting Hardware
inches 114.0 / 15.6 / 8.3
for 42–115 mm (1.7–4.5 inch)
diameter
10-Port Antenna R1 R2 G1 Y1 Y2
Frequency Range 698–960 698–960 1427–1518 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65°
10-Port Antenna 2LB/3HB 2.0m 65° | 698–960 15.5dBi | 698–960 15.5dBi |

1427–1518 17dBi | 2x1695–2690 18dBi
Type No. 80011965
698 – 960
Horizontal Pattern:
dB > 21 > 22 > 25 > 27
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.8 < 0.8 < 0.6 < 0.4
dB > 14 > 14 > 14 > 13
Suppression
10 Ports
Port to Port Isolation > 26, typically 30 (R1 // R2, G1)
dB
> 30 (R1 // Y1, Y2)
per Port
Ports R1

698 – 960
Horizontal Pattern:
dB > 21 > 22 > 25 > 27
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.6 < 0.6 < 0.5 < 0.4
dB > 13 > 15 > 15 > 16
Suppression
Port to Port Isolation > 26, typically 30 (R2 // R1, G1)
dB
> 30 (R2 // Y1, Y2)
per Port
Ports R2

10-Port Antenna
80011965
Center, highband G1, connector 5 – 6
1427– 1518
Horizontal Pattern:
dB > 25 > 27
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
dB > 20 > 22
Suppression
Port to Port Isolation dB > 26, typically 30 (G1 // R1, R2, Y1, Y2)
per Port
Ports G1

1695 – 2690
Horizontal Pattern:
dB > 26 > 26 > 28 > 26 > 26
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.6 < 0.6 < 0.6 < 0.5 < 0.5
dB > 16 > 19 > 17 > 15 > 13
Suppression
Port to Port Isolation dB > 30 (Y1 // R1, R2, G1, Y2)
per Port
Ports Y1
10-Port Antenna
80011965
1695 – 2690
Horizontal Pattern:
dB > 26 > 26 > 26 > 24 > 25
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.6 < 0.6 < 0.6 < 0.5 < 0.4
dB > 18 > 20 > 17 > 18 > 15
Suppression
Port to Port Isolation dB > 30 (Y2 // R1, R2, G1, Y1)
per Port
10 Ports
Ports Y2

for the Antenna
Mounting Hardware
lb 108.0 / 119.0 (clamps incl.)]
inches 86.6 / 21.3 / 10.6
clamps for 55– 115 mm |
gory of
The “Cate ware”
H ard
h a n g e
will c 19
during 20
12 Ports
12-Port Antenna 698–894 65° 15.5dBi 1°–10°T 840370799 2437 4.3-10, bottom 158 AG
689–894 65° 15.5dBi 1°–10°T –
1695–2360 65° 17dBi 2.5°–12°T 161
1695–2360 65° 17dBi 2.5°–12°T
1695–2360 65° 17dBi 2.5°–12°T
1695–2360 65° 17dBi 2.5°–12°T
12-Port Antenna 698–803 65° 15dBi 2°–12°T 80010798 1995 4.3-10, bottom 162 Z
824–894 65° 16dBi 2°–12°T –
1695–2690 65° 16dBi 2°–14°T 164
1695–2690 65° 16.5dBi 2°–14°T
1695–2690 65° 17dBi 2°–14°T
1695–2690 65° 16.5dBi 2°–14°T
12-Port Antenna 698–806 65° 16dBi 1.5°–10°T 80020799 2438 4.3-10, bottom 165 Z
824–894 65° 16.5dBi 1.5°–10°T –
1695–2360 65° 17dBi 2.5°–12°T 167
1695–2360 65° 17dBi 2.5°–12°T
1695–2360 65° 17.5dBi 2.5°–12°T
1695–2360 65° 17dBi 2.5°–12°T
12-Port Antenna 698–803 65° 16dBi 1.5°–10°T 80010799 2693 4.3-10, bottom 168 Z
824–894 65° 17dBi 1.5°–10°T –
1695–2690 65° 17.5dBi 2.5°–12°T 170
1695–2690 65° 17dBi 2.5°–12°T
1695–2690 65° 18.5dBi 2.5°–12°T
1695–2690 65° 17.5dBi 2.5°–12°T
12-Port Antenna 698–862 65° 15.5dBi 2°–12°T 80011898 1999 4.3-10, bottom 171 Z
880–960 65° 16dBi 2°–12°T –
1695–2690 65° 16dBi 2°–14°T 173
1695–2690 65° 16dBi 2°–14°T
1427–2690 65° 16.5dBi 2°–14°T
1695–2690 65° 16.5dBi 2°–14°T
Type Z Type AG
R2
R1
1x R1
Y2 Y4 Y2 Y4
Y1 Y3 Y1 Y3
R1 R1 R2
Left Right Left Right
156
12 Ports
12-Port Antenna 698–862 65° 15.5dBi 2°–12°T 80010898 1995 4.3-10, bottom 174 Z
880–960 65° 16dBi 2°–12°T –
1695–2690 65° 16dBi 2°–14°T 176
1695–2690 65° 16.5dBi 2°–14°T
1695–2690 65° 17dBi 2°–14°T
1695–2690 65° 16.5dBi 2°–14°T
12-Port Antenna 698–862 65° 16.5dBi 1.5°–10°T 80020899 2693 4.3-10, bottom 177 Z
880–960 65° 17dBi 1.5°–10°T –
1695–2690 65° 17.5dBi 2.5°–12°T 179
1695–2690 65° 17dBi 2.5°–12°T
1695–2690 65° 18dBi 2.5°–12°T
1695–2690 65° 17.5dBi 2.5°–12°T
698–960 65° 15.5dBi 2°–12°T –
1695–2690 65° 16dBi 2°–14°T 183
1695–2690 65° 16.5dBi 2°–14°T
1695–2690 65° 16dBi 2°–14°T
1695–2690 65° 16.5dBi 2°–14°T
12 Ports
698–960 65° 16.5dBi 1°–10°T –
1695–2690 65° 17.5dBi 2.5°–12°T 187
1695–2690 65° 17.5dBi 2.5°–12°T
1695–2690 65° 17.5dBi 2.5°–12°T
1695–2690 65° 17.5dBi 2.5°–12°T
157
12-Port Antenna R1 R2 Y1 Y2 Y3 Y4
Frequency Range 698–894 698–894 1695–2360 1695–2360 1695–2360 1695–2360
HPBW 65° 65° 65° 65° 65° 65°
•Ultra compact width

12-Port Antenna 2LB/4HB 8ft 65° | 2x698–894 15.5dBi | 4x 1695–2360 17dBi
Type No. 840370799
698–894
Horizontal Pattern:
Front-to-Back Ratio, ± 30° dB > 25 > 25
dB > 16 > 22
at Boresight
dB > 7.5 > 9.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 1.0 – 10.0
dB > 16 > 17
Suppression
Cross Polar Isolation dB > 25 typically
Port to Port Isolation dB > 25 (R1 // R2, Y1, Y2, Y3, Y4) typically
per Port
Ports R1

698–894
Horizontal Pattern:
Front-to-Back Ratio, ± 30° dB > 25 > 25
dB > 16 > 21
at Boresight
dB > 8.0 > 11.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 1.0 – 10.0
dB > 16 > 19
Suppression
Cross Polar Isolation dB > 25 typically
Port to Port Isolation dB > 25 (R2 // R1, Y1, Y2, Y3, Y4) typically
per Port
Ports R2
12-Port Antenna
840370799
1695 – 2360
Horizontal Pattern:
Front-to-Back Ratio, ± 30° dB > 23 > 28 > 29 > 29
> 14 > 17 > 20 > 16
at Boresight
dB > 10.0 > 10.5 > 11.0 > 8.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.8 < 0.7 < 0.7 < 0.4
dB > 16 > 17 > 15 > 14
Suppression
Port to Port Isolation dB > 25 (Y1 // R1, R2, Y2, Y3, Y4)
per Port
Ports Y1
12 Ports
Left side, upper highband Y2, connector 7– 8
1695–2360
Horizontal Pattern:
dB > 15 > 18 > 21 > 16
at Boresight
dB > 10.5 > 11.0 > 11.0 > 7.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.4 < 0.3 < 0.3 < 0.3
dB > 15 > 16 > 15 > 15
Suppression
per Port
Ports Y2

12-Port Antenna
840370799
Right side, lower highband Y3, connector 9 – 10
1695–2360
Horizontal Pattern:
dB > 14 > 18 > 21 > 21
at Boresight
dB > 10.5 > 10.5 > 10.5 > 8.5
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.6 < 0.4 < 0.4 < 0.5
dB > 16 > 17 > 16 > 14
Suppression
per Port
Ports Y3
Right side, upper highband Y4, connector 11 – 12

1695–2360
Horizontal Pattern:
dB > 15 > 19 > 21 > 20
at Boresight
dB > 10.5 > 11.5 > 12.0 > 9.0
over Sector
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.3 < 0.4
dB > 15 > 15 > 14 > 14
Suppression
per Port
Ports Y4
12-Port Antenna
840370799
Polarization ° +45, −45 Wind Speed: 150 km/h) Lateral: 485 | 109
Maximal: 1035 | 233
Max. Effective Power 1000 (at 50 °C ambient
for the Antenna
mph 150
inches 96.0 / 14.9 / 6.5
Mounting Hardware
lb 93 / 104 (clamps incl.)
inches 101.8 / 17.3 / 11.5
for 55–115 mm |
12 Ports
Dual Polarization 698–803 824–894 1695–2690 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65° 65°
12-Port Antenna 2LB/4HB 2.0m 65° | 698–803 15dBi | 824–894 16dBi | 4x1695–2690 16.5dBi
Type No. 80010798
698–803 824–894
Horizontal Pattern:
dB > 21 > 26
dB > 24 > 24
at Boresight
dB > 7.0 > 7.0
over Sector
Azimuth Beam
dB < 1.5 < 1.5
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0 2.0 – 12.0
dB > 16 > 18
Suppression
Upper Side Lobe
above Main Beam
dB
> 30 (R1 // Y1, Y2, Y3, Y4) > 30 (R2 // Y1, Y2, Y3)
Max. Effective Power for
Max. Effective Power
Ports R1 + R2

1695–2690
Horizontal Pattern:
dB > 23 > 25 > 25 > 25 > 25
dB > 17 > 20 > 24 > 20 > 22
at Boresight
dB > 6.5 > 10.0 > 10.0 > 8.0 > 8.5
over Sector
Azimuth Beam
dB < 2.5 < 2.0 < 2.0 < 2.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.3 < 0.4 < 0.3 < 0.4 < 0.3
dB > 20 > 21 > 19 > 16 > 15
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y1
12-Port Antenna
80010798
1695–2690
Horizontal Pattern:
dB > 23 > 26 > 26 > 25 > 26
dB > 16 > 21 > 24 > 15 > 15
at Boresight
dB > 7.0 > 8.5 > 9.5 > 7.0 > 7.0
over Sector
Azimuth Beam
dB < 2.5 < 2.5 < 1.5 < 2.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.5 < 0.4
dB > 17 > 19 > 19 > 20 > 18
Suppression
Upper Side Lobe
above Main Beam
12 Ports
per Port
Ports Y2

1695–2690
Horizontal Pattern:
dB > 23 > 23 > 24 > 24 > 23
dB > 25 > 26 > 25 > 20 > 15
at Boresight
dB > 16.0 > 16.0 > 14.5 > 8.5 > 10.0
over Sector
Azimuth Beam
dB < 1.5 < 1.0 < 1.0 < 2.0 < 3.5
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.5 < 0.4 < 0.3
dB > 17 > 18 > 19 > 19 > 18
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y3
12-Port Antenna
80010798
1695 – 2690
Horizontal Pattern:
dB > 25 > 24 > 25 > 25 > 21
dB > 21 > 23 > 21 > 16 > 15
at Boresight
dB > 13.5 > 14.5 > 12.5 > 6.5 > 8.0
over Sector
Azimuth Beam
dB < 1.0 < 1.0 < 1.0 < 1.0 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.5 < 0.4 < 0.4
dB > 18 > 18 > 17 > 17 > 16
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y4

for the Antenna
inches 78.5 / 14.8 / 6.7
Mounting Hardware
inches 86.5 / 15.6 / 8.3
2 units of clamps
for 42–115 mm |
Frequency Range 698–806 824–894 1695–2360 1695–2360 1695–2360 1695–2360
HPBW 65° 65° 65° 65° 65° 65°
12-Port Antenna 2LB/4HB 2.4m 65° | 698–806 16dBi | 824–894 16.5dBi |

4x1695–2360 17.5dBi
Type No. 80020799
698–803 824–894
Horizontal Pattern:
Azimuth Beamwidth ° 70.9 ± 1.8 67.8 ± 2.3
dB > 21.4 > 24.5
dB > 25.0 > 25.0
at Boresight
dB > 8.0 > 8.0
over Sector
Azimuth Beam
dB < 1.0 < 1.5
Vertical Pattern:
Electrical Downtilt
° 1.5 – 10.0 1.5 – 10.0
dB > 16.0 > 17.0
Suppression
Upper Side Lobe
Suppression, 20° Sector dB > 15.0 > 16.0
12 Ports
above Main Beam
Cross Polar Isolation dB > 25, typically 32.9 > 25, typically 36.8
dB
> 30 (R1// Y1, Y2, Y3, Y4) > 30 (R2 // Y1, Y2, Y3, Y4)
Ports R1 + R2

1695–2360
Horizontal Pattern:
Azimuth Beamwidth ° 64.5 ± 3.3 63.8 ± 2.9 61.7 ± 5.6 59.4 ± 4.7
dB > 21.4 > 22.0 > 22.5 > 21.0
dB > 16.0 > 21.0 > 22.5 > 19.5
at Boresight
dB > 8.0 > 7.0 > 10.7 > 9.0
over Sector
Azimuth Beam
dB < 2.3 < 2.3 < 1.8 < 1.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.5 < 0.4 < 0.3 < 0.4
dB > 17.0 > 16.0 > 15.0 > 15.0
Suppression
Upper Side Lobe
Suppression, 20° Sector dB > 13.0 > 13.0 > 13.0 > 13.0
above Main Beam
Cross Polar Isolation dB > 25, typically 31.8
Port to Port Isolation dB > 30 (Y1 // R1, R2, Y2 , Y3, Y4)
per Port
Ports Y1
12-Port Antenna
80020799
1695–2360
Horizontal Pattern:
dB > 23.6 > 25.0 > 25.0 > 25.0
dB > 16.0 > 22.0 > 24.0 > 19.5
at Boresight
dB > 8.5 > 11.5 > 13.4 > 9.0
over Sector
Azimuth Beam
dB < 1.1 < 2.2 < 1.9 < 2.2
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.4
dB > 17.0 > 16.0 > 15.0 > 15.0
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y2

1695–2360
Horizontal Pattern:
dB > 25.0 > 25.0 > 25.0 > 25.0
dB > 18.2 > 17.9 > 17.7 > 20.9
at Boresight
dB > 16.7 > 14.7 > 14.5 > 14.6
over Sector
Azimuth Beam
dB < 1.0 < 1.5 < 1.4 < 1.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.4 < 0.3 < 0.3 < 0.4
dB > 17.5 > 17.4 > 16.3 > 15.2
Suppression
Upper Side Lobe
above Main Beam
Max. Effective Power per 120 (at 50 °C ambient
specified Band per Port W 200 (at 50 °C ambient temperature)
temperature)
per Port
Ports Y3
12-Port Antenna
80020799
1695–2360
Horizontal Pattern:
dB > 25.0 > 25.0 > 25.0 > 25.0
dB > 17.2 > 16.6 > 16.2 > 16.5
at Boresight
dB > 16.4 > 14.7 > 14.2 > 8.8
over Sector
Azimuth Beam
dB < 1.0 < 1.0 < 1.0 < 1.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.5 < 0.5 < 0.5 < 0.5
dB > 15.9 > 15.7 > 15.2 > 15.0
Suppression
Upper Side Lobe
above Main Beam
12 Ports
Max. Effective Power per 120 (at 50 °C ambient
specified Band per Port W 200 (at 50 °C ambient temperature)
temperature)
per Port
Ports Y4

for the Antenna
inches 96.0 / 14.9 / 6.5
Mounting Hardware
lb 102.5 / 113.5 (clamps incl.)
inches 103.9 / 16.2 / 10.0
for 55–115 mm |
Dual Polarization 698–803 824–894 1695–2690 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65° 65°
12-Port Antenna 2LB/4HB 2.7m 65° | 698–803 16dBi | 824–894 17dBi | 4x1695–2690 18.5dBi
Type No. 80010799
698–803 824–894
Horizontal Pattern:
dB > 21 > 25
dB > 25 > 27
at Boresight
dB > 6.5 > 8.5
over Sector
Azimuth Beam
dB < 2.0 < 2.0
Vertical Pattern:
Electrical Downtilt
° 1.5 – 10.0 1.5 – 10.0
dB > 16 > 16
Suppression
Upper Side Lobe
above Main Beam
dB
> 30 (R1// Y1, Y2, Y3, Y4) > 30 (R2 // Y1, Y2, Y3, Y4)
Ports R1 + R2

1695–2690
Horizontal Pattern:
dB > 22 > 24 > 24 > 21 > 22
dB > 16 > 23 > 22 > 19 > 18
at Boresight
dB > 8.0 > 9.5 > 11.5 > 8.5 > 9.0
over Sector
Azimuth Beam
dB < 1.5 < 2.0 < 1.5 < 1.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.2 < 0.3
dB > 16 > 17 > 16 > 15 > 15
Suppression
Upper Side Lobe
above Main Beam
Cross Polar Isolation > 26 (1695 – 1710 MHz)
dB
> 28 (1710 – 2690 MHz)
per Port
Ports Y1
12-Port Antenna
80010799
1695–2690
Horizontal Pattern:
dB > 23 > 26 > 24 > 25 > 23
dB > 15 > 22 > 25 > 18 > 16
at Boresight
dB > 7.5 > 9.5 > 10.5 > 8.0 > 8.5
over Sector
Azimuth Beam
dB < 1.0 < 2.5 < 2.0 < 2.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.4 < 0.3 < 0.2 < 0.3 < 0.3
dB > 14 > 15 > 16 > 16 > 15
Suppression
Upper Side Lobe
above Main Beam
12 Ports
per Port
Ports Y2

1695–2690
Horizontal Pattern:
dB > 25 > 25 > 25 > 26 > 25
dB > 21 > 22 > 21 > 17 > 16
at Boresight
dB > 15.5 > 16.0 > 13.5 > 8.0 > 9.0
over Sector
Azimuth Beam
dB < 1.0 < 0.5 < 1.0 < 1.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.3 < 0.3 < 0.2
dB > 20 > 22 > 21 > 18 > 22
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y3
12-Port Antenna
80010799
1695–2690
Horizontal Pattern:
dB > 24 > 24 > 24 > 25 > 24
dB > 20 > 21 > 19 > 16 > 17
at Boresight
dB > 16.0 > 17.0 > 14.5 > 8.5 > 8.5
over Sector
Azimuth Beam
dB < 1.0 < 0.5 < 1.0 < 1.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.2 < 0.2 < 0.3 < 0.2
dB > 19 > 24 > 23 > 18 > 23
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y4

for the Antenna
inches 106.0 / 14.8 / 6.7
Mounting Hardware
lb 103.6 / 108.5 (clamps incl.)
inches 114.0 / 15.6 / 8.3
2 units of clamps
for 42–115 mm |
Frequency Range 698–862 880–960 1695–2690 1695–2690 1427–2690 1695–2690
HPBW 65° 65° 65° 65° 65° 65°
12-Port Antenna 2LB/4HB 2.0m 6

5° | 698–862 15.5dBi | 880–960 16dBi |
3x1695–2690 16.5dBi | 1427–2690 16.5dBi
Type No. 80011898
698–862 880–960
Horizontal Pattern:
Vertical Pattern:
Tilt Accuracy ° < 0.5 < 0.5 < 0.4
dB > 16 > 19 > 21
Suppression
Port to Port Isolation > 28 (R1 // R2) > 27, typ. > 28 (R2 // Y1, Y4)
dB > 30 (R1 // Y1, Y2, Y3, Y4) > 30 (R2 // Y2, Y3)
Ports R1 + R2
12 Ports

1695–2690
Horizontal Pattern:
dB > 24 > 25 > 25 > 25 > 25
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.3 < 0.4 < 0.3 < 0.4 < 0.3
dB > 21 > 21 > 20 > 16 > 15
Suppression
per Port
Ports Y1

12-Port Antenna
80011898
1695–2690
Horizontal Pattern:
dB > 23 > 26 > 26 > 25 > 26
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.5 < 0.4
dB > 17 > 19 > 19 > 20 > 19
Suppression
per Port
Ports Y2
Right side, lower highband Y3, connector 9 –10

1427–2690
Horizontal Pattern:
dB > 25 > 25 > 24 > 25 > 25 > 28 > 25
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.8 < 0.7 < 0.5 < 0.3 < 0.3 < 0.3 < 0.5
dB > 14 > 15 > 15 > 17 > 18 > 18 > 14
Suppression
per Port
Ports Y3
12-Port Antenna
80011898
1695–2690
Horizontal Pattern:
dB > 25 > 24 > 25 > 25 > 21
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.5 < 0.4 < 0.4
dB > 18 > 18 > 17 > 17 > 16
Suppression
per Port
Ports Y4
12 Ports
Interband Isolation dB > 27, typ. 28 continuously adjustable
for the Antenna
inches 78.7 / 14.9 / 6.5
Mounting Hardware
inches 86.6 / 16.2 / 10.0
for 55–115 mm |
gory of
The “Cate ware”
H ard
h a n g e
will c 19
during 20
Frequency Range 698–862 880–960 1695–2690 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65° 65°

5° | 698–862 15.5dBi | 880–960 16dBi |
4x1695–2690 16.5dBi
Type No. 80010898
698–862 880–960
Horizontal Pattern:
Vertical Pattern:
Tilt Accuracy ° < 0.5 < 0.5 < 0.4
dB > 16 > 19 > 21
Suppression
Upper Side Lobe
above Main Beam
dB > 30 (R1 // Y1, Y2, Y3, Y4) > 30 (R2 // Y1, Y2, Y3)
Ports R1 + R2

1695–2690
Horizontal Pattern:
dB > 23 > 25 > 25 > 25 > 25
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.3 < 0.4 < 0.3 < 0.4 < 0.3
dB > 20 > 21 > 19 > 16 > 15
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y1
12-Port Antenna
80010898
1695–2690
Horizontal Pattern:
dB > 23 > 26 > 26 > 25 > 26
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.5 < 0.4
dB > 17 > 19 > 19 > 20 > 18
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y2
12 Ports
Right side, lower highband Y3, connector 9 –10
1695–2690
Horizontal Pattern:
dB > 23 > 23 > 24 > 24 > 23
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.5 < 0.4 < 0.3
dB > 17 > 18 > 19 > 19 > 18
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y3

12-Port Antenna
80010898
1695–2690
Horizontal Pattern:
dB > 25 > 24 > 25 > 25 > 21
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.5 < 0.4 < 0.4
dB > 18 > 18 > 17 > 17 > 16
Suppression
Upper Side Lobe
above Main Beam
per Port
Ports Y4

for the Antenna
inches 78.5 / 14.8 / 6.7
Mounting Hardware
inches 86.5 / 15.6 / 8.3
2 units of clamps
for 42–115 mm |
12-Port Antenna
Frequency Range 698–862 880–960 1695–2690 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65° 65°

5° | 698–862 16.5dBi | 880–960 17dBi |
4x1695–2690 17.5dBi
Type No. 80020899
698–862 880–960
Horizontal Pattern:
at Boresight
over Sector
Azimuth Beam dB < 2.0 < 2.0 < 2.0
Vertical Pattern:
Tilt Accuracy ° < 0.4 < 0.4 < 0.4
Suppression
12 Ports
dB > 30 (R1 // Y1, Y2, Y3, Y4) > 30 (R2 // Y1, Y2, Y3, Y4)
Ports R1 + R2

1695–2690
Horizontal Pattern:
dB > 22 > 24 > 24 > 21 > 22
dB > 17 > 23 > 22 > 19 > 18
at Boresight
dB > 8.0 > 9.5 > 11.5 > 8.5 > 9.0
over Sector
Azimuth Beam
dB < 1.5 < 2.0 < 1.5 < 1.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.2 < 0.3
dB > 16 > 17 > 16 > 15 > 15
Suppression
per Port
Ports Y1

12-Port Antenna
80020899
1695–2690
Horizontal Pattern:
dB > 24 > 26 > 24 > 25 > 23
dB > 15 > 22 > 25 > 18 > 16
at Boresight
dB > 7.5 > 9.5 > 10.5 > 8.0 > 8.5
over Sector
Azimuth Beam
dB < 1.0 < 2.5 < 2.0 < 2.5 < 2.0
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.3 < 0.2 < 0.3 < 0.3
dB > 14 > 15 > 16 > 16 > 15
Suppression
per Port
Ports Y2

1695–2690
Horizontal Pattern:
dB > 25 > 25 > 25 > 26 > 25
dB > 21 > 22 > 21 > 17 > 16
at Boresight
dB > 15.5 > 16.0 > 13.5 > 8.0 > 9.0
over Sector
Azimuth Beam
dB < 1.0 < 0.5 < 1.0 < 1.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.3 < 0.3 < 0.2
dB > 20 > 22 > 21 > 18 > 22
Suppression
per Port
Ports Y3
12-Port Antenna
80020899
1695–2690
Horizontal Pattern:
dB > 25 > 24 > 24 > 25 > 24
dB > 20 > 21 > 19 > 16 > 17
at Boresight
dB > 16.0 > 17.0 > 14.5 > 8.5 > 8.5
over Sector
Azimuth Beam
dB < 1.0 < 0.5 < 1.0 < 1.5 < 2.5
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.3 < 0.2
dB > 20 > 24 > 23 > 18 > 23
Suppression
per Port
12 Ports
Ports Y4

for the Antenna
inches 106.0 / 14.8 / 6.7
Mounting Hardware
lb 102.5 / 107.4 (clamps incl.)
inches 114.0 / 15.6 / 8.3
2 units of clamps
for 42–115 mm |
Frequency Range 698–960 698–960 1695–2690 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65° 65°
12-Port Antenna 2LB/4HB 2.0m 65° | 2x698–960 15.5dBi | 4x1695–2690 16.5dBi

Type No. 80010991
698–960
Horizontal Pattern:
dB > 22 > 25 > 27 > 25
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.7 < 0.8 < 0.7 < 0.7
dB > 14 > 14 > 15 > 14
Suppression
dB
> 30 (R1 // Y1, Y2, Y3, Y4)
per Port
Ports R1

698–960
Horizontal Pattern:
dB > 22 > 24 > 26 > 27
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.6 < 0.6 < 0.6 < 0.4
dB > 14 > 16 > 16 > 16
Suppression
dB
> 30 (R2 // Y1, Y2, Y3, Y4)
per Port
Ports R2
12-Port Antenna
80010991
1695–2690
Horizontal Pattern:
dB > 22 > 23 > 24 > 21 > 23
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.3 < 0.3 < 0.5 < 0.4
dB > 21 > 21 > 20 > 20 > 18
Suppression
Cross Polar Isolation dB > 26, typically > 30
per Port
Ports Y1
12 Ports
1695–2690
Horizontal Pattern:
dB > 21 > 25 > 26 > 23 > 24
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.2 < 0.2 < 0.2 < 0.4
dB > 19 > 19 > 20 > 18 > 19
Suppression
per Port
Ports Y2

12-Port Antenna
80010991
1695–2690
Horizontal Pattern:
dB > 22 > 24 > 25 > 23 > 22
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.3 < 0.3 < 0.4 < 0.4
dB > 20 > 21 > 21 > 17 > 18
Suppression
Port to Port Isolation dB > 30 ( Y3 // R1, R2, Y1, Y2, Y4)
per Port
Ports Y3

1695–2690
Horizontal Pattern:
dB > 23 > 24 > 24 > 25 > 24
Vertical Pattern:
Electrical Downtilt
° 2.0 – 14.0
Tilt Accuracy ° < 0.4 < 0.2 < 0.2 < 0.2 < 0.3
dB > 20 > 20 > 20 > 20 > 17
Suppression
Port to Port Isolation dB >30 ( Y4 // R1, R2, Y1, Y2, Y3)
per Port
Ports Y4
12-Port Antenna
80010991
for the Antenna
inches 78.7 / 20.0 / 6.9
Mounting Hardware
lb 107.4 / 118.4 (clamps incl.)
inches 86.6 / 21.3 / 10.6
for 55–115 mm |
gory of
The “Cate ware”
n ti n g H ard
Mou ”
ge to “XM
will chan 0 19
during 2
12 Ports
Frequency Range 698–960 698–960 1695–2690 1695–2690 1695–2690 1695–2690
HPBW 65° 65° 65° 65° 65° 65°
12-Port Antenna 2LB/4HB 2.7m 65° | 2x698–960 16.5dBi | 4x1695–2690 17.5dBi

Type No. 80010992
698–960
Horizontal Pattern:
dB > 23 > 23 > 24 > 25
Vertical Pattern:
Electrical Downtilt
° 1 – 10
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.4
dB > 16 > 18 > 18 > 20
Suppression
Port to Port Isolation > 27, typically 30 (R1 // R2, Y2)
dB
> 30 (R1 // Y1, Y3, Y4)
per Port
Ports R1

698–960
Horizontal Pattern:
dB > 22 > 23 > 24 > 26
Vertical Pattern:
Electrical Downtilt
° 1 – 10
Tilt Accuracy ° < 0.4 < 0.4 < 0.4 < 0.3
dB > 18 > 21 > 20 > 20
Suppression
dB
> 30 (R2 // Y1, Y2, Y3, Y4)
per Port
Ports R2
12-Port Antenna
80010992
1695–2690
Horizontal Pattern:
dB > 23 > 25 > 25 > 24 > 23
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12
Tilt Accuracy ° < 0.3 < 0.2 < 0.2 < 0.2 < 0.2
dB > 19 > 20 > 19 > 18 > 17
Suppression
per Port
Ports Y1
12 Ports
1695–2690
Horizontal Pattern:
dB > 25 > 25 > 26 > 24 > 23
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
dB > 16 > 16 > 15 > 15 > 15
Suppression
Port to Port Isolation dB > 30 (Y2 // R1, R2 , Y1, Y3, Y4)
per Port
Ports Y2

12-Port Antenna
80010992
1695–2690
Horizontal Pattern:
dB > 23 > 24 > 25 > 22 > 22
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
dB > 17 > 17 > 17 > 16 > 16
Suppression
per Port
Ports Y3

1695–2690
Horizontal Pattern:
dB > 24 > 25 > 26 > 26 > 23
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12
Tilt Accuracy ° < 0.2 < 0.2 < 0.2 < 0.1 < 0.2
dB > 17 > 17 > 17 > 16 > 17
Suppression
Port to Port Isolation dB > 30 (Y4 // R1, R2 , Y1, Y2, Y3)
per Port
Ports Y4
12-Port Antenna
80010992
for the Antenna
inches 105.2 / 20.0 / 6.9
Mounting Hardware
lb 133.3 / 144.3 (clamps incl.)
inches 113.0 / 21.3 / 10.6
12 Ports
14 Ports
14-Port Antenna 698–862 65° 14.5dBi 2°–16°T 80011877 1499 4.3-10, bottom 190 AJ
880–960 65° 15dBi 2°–16°T +
1710–2170 65° 17dBi 2.5°–12°T 191
2500–2690 65° 17dBi 2.5°–12°T
1427–1518 65° 16.5dBi 2.5°–12°T
1710–2170 65° 16.5dBi 2.5°–12°T
2500–2690 65° 17dBi 2.5°–12°T
14-Port Antenna 698–862 65° 15.5dBi 2°–12°T 80011878 1999 4.3-10, bottom 192 AJ
880–960 65° 16dBi 2°–12°T +
1710–2170 65° 17.5dBi 2.5°–12°T 193
2500–2690 65° 18dBi 2.5°–12°T
1427–1518 65° 16.5dBi 2.5°–12°T
1710–2170 65° 16.5dBi 2.5°–12°T
2500–2690 65° 17dBi 2.5°–12°T
Type AJ
R2
Y1 Y2
1x
2x
B2
1x
B1 G1
R1
Left Right
188
16 Ports
16-Port Antenna 698–862 65° 15dBi 2°–12°T 800442001 1943.5 4.3-10, bottom 194 AM
880–960 65° 15.5dBi 2°–12°T –
698–960 65° 15.5dBi 2°–12°T 196
1427–2170 65° 17dBi 2.5°–12°T
1427–2170 65° 17dBi 2.5°–12°T
2500–2690 65° 17dBi 2.5°–12°T
1710–2690 65° 18dBi 2.5°–12°T
2500–2690 65° 18dBi 2.5°–12°T
14 + 16 Ports
Type AM
R2
Y1 Y3
1x
2x
B1 Y2 B2
R1 R3
Left Center Right
189
14-Port Antenna R1 R2 B1 Y1 G1 B2 Y2
Frequency Range 698–862 880–960 1710–2170 2500–2690 1427–1518 1710–2170 2500–2690
HPBW 65° 65° 65° 65° 65° 65° 65°
14-Port Antenna 2
LB/5HB 1.5m 65° | 698–862 14.5dBi | 880–960 15dBi |
2x1710–2170 17dBi | 2x2500–2690 17dBi |
1427–1518 16.5dBi
Type No. 80011877
698–862 880–960
Horizontal Pattern:
dB > 21 > 22 > 25
Vertical Pattern:
Electrical Downtilt
° 2.0 – 16.0 2.0 – 16.0
Tilt Accuracy ° < 0.6 < 0.5 < 0.4
dB > 15 > 16 > 16
Suppression
Port to Port Isolation > 28, typically > 30 (R1 // R2) > 28, typically > 30 (R1 // R2)
dB
> 30 (R1 // Y1, Y2, B1, B2, G1) > 30 (R2 // Y1, Y2, B1, B2, G1)
Max. Effective Power Group W 400 (at 50 °C ambient temperature)
of Ports 1+3 // 2+4
Ports R1 + R2
Left side, highbands B1, connector 7– 8 Y1, connector 11 – 12

1710–2170 2500–2690
Frequency Range 1710 – 1785 1920 – 1980 2500 – 2570
MHz
1805 – 1880 2110 – 2170 2620 – 2690
Horizontal Pattern:
dB > 25 > 26 > 28
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.2 < 0.2
dB > 18 > 21 > 15
Suppression
Port to Port Isolation dB > 30 (B1 // R1, R2, B2, Y1, Y2) > 30 (Y1 // R1, R2, G1, B1, B2, Y2)
of Ports 7+11 // 8+12
Ports B1 + Y1
14-Port Antenna
80011877
Right side, highbands G1, connector 5 – 6 B2, connector 9 – 10 Y2, connector 13–14
1427–1518 1710–2170 2500–2690
Frequency Range 1427 – 1496 1492 – 1518 1710 – 1785 1920 – 1980 2500 – 2570
MHz
1805 – 1880 2110 – 2170 2620 – 2690
Horizontal Pattern:
dB > 27 > 26 > 26 > 27 > 28
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.2 < 0.3 < 0.2 < 0.2
dB > 15 > 15 > 17 > 16 > 15
Suppression
Cross Polar Isolation dB > 28 > 28 > 28
Port to Port Isolation > 30 (Y2 // R1, R2, G1, B1,
dB > 30 (G1 // R1, R2, B1, B2, Y1, Y2) > 30 (B2 // R1, R2, G1, B1, Y1, Y2)
B2, Y1)
per Port W 150 (at 50 °C ambient temperature) 150 (at 50 °C ambient temperature)
temperature)
of Ports 5+9+13 // 6 +10 +14
Ports G1 + B2 + Y2
14 + 16 Ports
for the Antenna
Mounting Hardware
inches 66.2 / 15.8 / 9.8
for 55– 115 mm |
gory of
The “Cate ware”
H ard
h a n g e
will c 19
during 20
14-Port Antenna R1 R2 B1 Y1 G1 B2 Y2
Frequency Range 698–862 880–960 1710–2170 2500–2690 1427–1518 1710–2170 2500–2690
HPBW 65° 65° 65° 65° 65° 65° 65°

2x1710–2170 17dBi | 2x2500–2690 17.5dBi |
1427–1518 16.5dBi
Type No. 80011878
698–862 880–960
Horizontal Pattern:
dB > 21 > 24 > 26
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0 2.0 – 12.0
Tilt Accuracy ° < 0.4 < 0.4 < 0.3
dB > 18 > 19 > 20
Suppression
Port to Port Isolation > 28, typically > 30 (R1 // R2) > 28, typically > 30 (R2 // R1)
dB
> 30 (R1 // Y1, Y2, B1, B2, G1) > 30 (R2 // Y1, Y2, B1, B2, G1)
Ports R1 + R2
Left side, highbands B1, connector 7– 8 Y1, connector 11 – 12

1710–2170 2500–2690
Frequency Range 1710 – 1785 1920 – 1980 2500 – 2570
MHz
1805 – 1880 2110 – 2170 2620 – 2690
Horizontal Pattern:
dB > 26 > 26 > 24
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0 2.5 – 12.0
Tilt Accuracy ° < 0.2 < 0.2 < 0.1
dB > 19 > 17 > 18
Suppression
Port to Port Isolation > 30 (B1 // R1, R2, B2, Y1, Y2)
dB > 30 (Y1 // R1, R2, G1, B1, B2, Y2)
> 28, typically > 30 (B1 // G1)
of Ports 7+11 // 8+12
Ports B1 + Y1
14-Port Antenna
80011878
Right side, highbands G1, connector 5 – 6 B2, connector 9 – 10 Y2, connector 13–14
1427–1518 1710–2170 2500–2690
Frequency Range 1427 – 1496 1492 – 1518 1710 – 1785 1920 – 1980 2500 – 2570
MHz
1805 – 1880 2110 – 2170 2620 – 2690
Horizontal Pattern:
dB > 27 > 26 > 26 > 27 > 28
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0 2.5 – 12.0
Tilt Accuracy ° < 0.3 < 0.2 < 0.3 < 0.2 < 0.2
dB > 15 > 15 > 17 > 16 > 15
Suppression
Cross Polar Isolation dB > 28 > 28 > 28
Port to Port Isolation > 30 (G1 // R1, R2, B2, Y1, Y2) > 30 (Y2 // R1, R2, G1, B1,
dB > 30 (B2 // R1, R2, G1, B1, Y1, Y2)
> 28, typically > 30 (G1 // B1) B2, Y1)
per Port W 150 (at 50 °C ambient temperature) 150 (at 50 °C ambient temperature)
temperature)
of Ports 5+9+13 // 6 +10 +14
Ports G1 + B2 + Y2
14 + 16 Ports
for the Antenna
Mounting Hardware
inches 86.6 / 15.1 / 10.0
for 55–115 mm |
gory of
The “Cate ware”
H ard
h a n g e
will c 19
during 20
16-Port Antenna R1 R2 R3 B1 B2 Y1 Y2 Y3
Frequency Range 698–862 880–960 698–960 1427–2170 1427–2170 2500–2690 1710–2690 2500–2690
HPBW 65° 65° 65° 65° 65° 65° 65° 65°

5° | 698–862 15dBi | 880–960 15.5dBi | 698–960 15.5dBi |
2x1427–2170 17dBi | 2x2500–2690 17dBi | 1710–2690 18dBi
Type No. 800442001
Left side, lowbands R1, connector 1 – 2 R2, connector 3 –4
698–862 880–960
Horizontal Pattern:
dB > 20 > 20 > 23
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0 2.0 – 12.0
Tilt Accuracy ° < 0.5 < 0.6 < 0.4
dB > 15 > 17 > 16
Suppression
Port to Port Isolation > 25, typically 30 (R2 // R1, R3)
> 25, typically 30 (R1 // R2, R3)
dB > 26, typically 30
> 26, typically 30 (R1 // Y1, Y2, Y3, B1, B2)
(R2 // Y1, Y2, Y3, B1, B2)
Ports R1 + R2
Right side, lowband R3, connector 5– 6

698–960
Horizontal Pattern:
dB > 20 > 20 > 20
Vertical Pattern:
Electrical Downtilt
° 2.0 – 12.0
Tilt Accuracy ° < 0.65 < 0.6 < 0.6
dB > 17 > 18 > 18
Suppression
Port to Port Isolation > 25, typically 30 (R3 // R1, R2)
dB
> 26, typically 30 (R3 // Y1, Y2, Y3, B1, B2)
per Port
Ports R3
16-Port Antenna
800442001 Preliminary Issue

Left side, highbands B1, connector 7– 8 Y1, connector 11– 12
1427–2170 2500–2690
Horizontal Pattern:
Azimuth Beamwidth ° 68 ± 4 62 ± 5.2 63 ± 5.5 58 ± 6
dB > 23 > 26 > 25 > 28
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0 2.5 – 12.0
Tilt Accuracy ° < 0.4 < 0.3 < 0.2 < 0.4
dB > 17 > 17 > 17 > 16
Suppression
Port to Port Isolation > 26, typically 30
dB > 26, typically 30 (B1 // R1, R2, R3, B2, Y1, Y2, Y3)
(Y1 // R1, R2, R3, B1, B2, Y2, Y3)
Group of Ports 7+11 // 8+ 12
Ports B1 + Y1
14 + 16 Ports
Right side, highbands B2, connector 9 – 10 Y3, connector 15 –16
1427–2170 2500–2690
Gain over all Tilts dBi 15.6 ± 0.6 16.8 ± 0.6 17.1 ± 0.7 17 ± 0.7
Horizontal Pattern:
Azimuth Beamwidth ° 68 ± 4.3 63 ± 5.7 63 ± 5.5 58 ± 6
dB > 24 > 26 > 25 > 27
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0 2.5 – 12.0
Tilt Accuracy ° < 0.5 < 0.4 < 0.3 < 0.4
dB > 18 > 17 > 17 > 16
Suppression
Port to Port Isolation > 26, typically 30
dB > 26, typically 30 (B2 // R1, R2, R3, B1, Y1, Y2, Y3)
(Y3 // R1, R2, R3, B1, B2, Y1, Y2)
Max. Effective Power for
Group of Ports 9+15 // W 180 (at 50 °C ambient temperature)
10+16
Ports B2 + Y3

16-Port Antenna
800442001 Preliminary Issue

Center, highband Y2, connector 13 –14
1710–2690
Gain at mid Tilt dBi 17.6 18.3 19
Horizontal Pattern:
dB > 25 > 27 > 30
Vertical Pattern:
Electrical Downtilt
° 2.5 – 12.0
Tilt Accuracy ° < 0.6 < 0.5 < 0.4
dB > 15 > 17 > 17
Suppression
Port to Port Isolation dB > 26 (Y2 // R1, R2, R3, B1, B2, Y1, Y3)
per Port
Ports Y2

for the Antenna
Mounting Hardware
lb 108.0 / 116.9 (clamps incl.)
inches 82.5 / 20.1 / 11.5
197
14 + 16 Ports
Summary – Small Cell Antennas
Special Design Antennas
Type Type No. Height Connector female, Page

Omnidirectional
1-Port Omni 1695–2700 360° 2dBi 0°T 80010431 115 N, bottom or top 235
2-Port Omni Slimpole 1710–2690 360° 5dBi 0°T 80020126 691 4.3-10, bottom 200
4-Port Omni 698–960 360° 6dBi 2°T GPS 80010745 626 7-16, bottom 201
1695–2690 360° 9dBi 2°T 80010746
4-Port Omni 698–894 C 360° 2.5dBi 0°T 84010793 626 4.3-10, bottom 202
1695–2690 360° 6dBi 2°T 84010794 +
698–894 C 360° 2.5dBi 0°T 203
1695–2690 360° 6dBi 2°T
10-Port Omni 1695–2690 360° 6.5dBi 0°T 84010555 626 4.3-10, bottom 204
1695–2690 360° 6.5dBi 0°T 84010556 +
3550–3700 360° 6.5dBi 5°T 205
3550–3700 360° 6.5dBi 5°T
5150–5925 360° 5dBi 0°T
698–894 360° 3.3dBi 0°T 84010558 +
1695–2690 360° 6.7dBi 0°T 207
1695–2690 360° 6.6dBi 0°T
3550–3700 360° 5.8dBi 10°T
3550–3700 360° 5.8dBi 10°T
5150–5925 360° 4dBi 12°T
698–894 360° 3.5dBi 0°T 84010604 –
1695–2690 360° 9dBi 4°T 210
1695–2690 360° 9dBi 6°T
1695–2690 360° 9dBi 4°T
1695–2690 360° 9dBi 6°T
3400–4200 360° 6.8dBi 5°T
3400–4200 360° 6.8dBi 5°T
5150–5925 360° 5dBi 0°T
5150–5925 360° 5dBi 0°T
24-Port Omni 1695–2690 360° 9dBi 4°T 84010601 626 4.3-10, bottom 211
1695–2690 360° 9dBi 6°T 84010602 –
1695–2690 360° 9dBi 4°T 213
1695–2690 360° 9dBi 4°T
1695–2690 360° 9dBi 6°T
1695–2690 360° 9dBi 4°T
3400–4200 360° 7dBi 5°T
3400–4200 360° 7dBi 5°T
3400–4200 360° 7dBi 5°T
3400–4200 360° 7dBi 5°T
5150–5925 360° 5dBi 0°T
5150–5925 360° 5dBi 0°T
198
Summary – Small Cell Antennas
Special Design Antennas

1-Sector
1-Port LogPer 690–2690 67° 11dBi 0°T 742192V02 300 7-16, bottom 226
1-Port Antenna 1710–2180 12° 18.5dBi 0°T 80010368 299 7-16, side 227
1-Port Yagi 790–960 C 38° 14dBi 0°T 80010828V01 170 7-16, rearside 229
1710–2170 28° 15.5dBi 0°T
2-Port Inside Connect Antenna 1695–2690 75° 8dBi 0°T 80020100 121.5 4.3-10, back 214
Accessories Parts for 80020100 85010205 215
2-Port Antenna 1710–2690 65° 9.5dBi 0°T 80020711 155 4.3-10, bottom or top 216
2-Port Antenna 790–960 C 65° 8dBi 0°T 80010753 334 7-16, bottom 217
1710–2690 65° 9dBI 0°T
10-Port Antenna 1695–2690 65° 14dBi 3°–15°T 84010564 610 4.3-10, bottom 218
1695–2690 65° 14dBi 3°–15°T +
3550–3700 65° 11dBi 5.5°T 219
3550–3700 65° 11dBi 5.5°T
5150–5925 65° 5dBi 12°T
2-Sector
1-Port BiDir 694–960/1710–2690 65° 5dBi 0°T 80020448 428 4.3-10, bottom 228
4-Port MicroCell 1695–2690 85° 7.5dBi 0°T 80010843 526 4.3-10, bottom and top 220
1695–2690 85° 7.5dBi 0°T
8-Port Two-Sector Antenna 698–960 65° 11dBi 2°T GPS 80010713 626 7-16, bottom 221
1695–2690 65° 13dBi 2°T 80010714
Small Cell
Tri-Sector
6-Port Tri-Sector Slimpole 1710–2690 80° 10dBi 0°T 80020125 691 4.3-10, bottom 222
12-Port Tri-Sector Antenna 698–960 65° 11dBi 2°T GPS 80010775 626 7-16, bottom 223
1695–2690 65° 13dBi 2°T 80010776
Street Connect
2-Port Street Connect 1695–2690 360° 6dBi 0°T 80010235 ∅ 375 4.3-10, bottom 224
Abbreviations:
199
Omni Slimpole Antenna 1710–2690
Dual Polarization X
2-Port Omni Slimpole HB 0.7m 360° | 1710–2690 5dBi

Type No. 80020126
1710–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 2x5 2x5 2x5 2x5
Horizontal Pattern:
691 mm | 27.2 inches

Half-power beam width Omni Omni Omni Omni
Deviation from dB ±1 ±1 ±1.5 ±1.5
circularity
Vertical Pattern:
Half-power beam ° 42 40 36 33
width
Impedance Ω 50
VSWR < 1.5
Isolation, dB > 30
between ports

Weight kg 2.3
lb 5.1
Wind load N 50
(at 150 km/h) lbf 11.2
mph 124
Mechanical interface Flange connection 8 x M6
at a graduated diameter of
136 mm | 5.4 inches.
Evenness of the opposite surface:
0.5 mm | 0.02 inches
inches 29.2 x 8.7 x 8.6
Height / diameter mm 691 / 100
inches 27.2 / 3.9
200
4-Port Omni Antenna R1 Y1
HPBW 360° 360°
4-Port Omni Antenna LB/HB 0.6m 360° | 698–960 6dBi | 1695–2690 9dBi with GPS
Type No. 80010745 80010746
Radome Colour Brown Grey
Lowband R1
698–960
Polarization ° +45, –45 +45, –45 +45, –45
Gain dBi 5.0 6.0 6.5
Horizontal Pattern:
Half-power beam width ° 360 (with 1–8 dB nulls, typically)
Vertical Pattern:
Half-power beam width ° 42 37.5 34
Impedance Ω 50
VSWR < 1.5 < 1.6 < 1.5
Isolation Intrasystem > 26, typ. 30
dB
Intersystem > 28 (R1 // Y1)
Highband Y1
1695–2690
Polarization ° +45, –45 +45, –45 +45, –45 +45, –45 +45, –45
Gain dBi 9.0 9.0 9.0 9.0 9.5
Horizontal Pattern:
Half-power beam width ° 360 (with 6–16 dB nulls, typically)
Vertical Pattern:
Impedance Ω 50 Ω
Small Cell
VSWR < 1.55 < 1.6 < 1.55
Isolation Intrasystem > 25, typ. 28
dB
Intersystem > 40 (Y1 // R1)
GPS specifications Mechanical specifications
Frequency range MHz 1575.42 ± 3 Input 4 x 7-16 connector female

LNA gain dB 27 typical Connector position Bottom
Pre-amp filtering dB −30 at ± 100 MHz Weight kg 18.1
Polarization Right-hand circular lb 39.9
H-plane beam width Omni Wind load N 138
(at Rated Wind lbf 32
E-plane half-power ° 105 Speed: 150 km/h)
beam width
Max. wind km/h 242
Connector N female velocity mph 150
DC power Vdc +3–5.5, 18–25 mA Mechanical interface Hex nut
Through N output connector (requires a 1½ʺ wrench)
Temperature range °C −35 to +70 Torque setting:
122 Nm | 90 lbf·ft
inches 29.7 / 18.9 /18.9
inches 24.6 / 16
4-Port Omni Antenna R1 Y1 R1 Y1
Frequency Range 698–894 1695–2690 698–894 1695–2690
HPBW 360° 360° 360° 360°
4-Port Omni Antenna 2LB/2HB 0.6m C 360° | 2x698–894 2.5dBi | 2x1695–2690 6dBi
Type No. 84010793 84010794
Radome colour Brown Grey
Wideband R1, Y1
1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 2 x 2.2 2 x 2.8 2 x 5.7 2 x 6.1 2 x 6.4
Horizontal Pattern:
Half-power beam width ° 360 (with 1–8 dB nulls LB, 6–16dB nulls HB, typical)
Vertical Pattern:
Electrical tilt ° 0, fixed 0, fixed 2, fixed 2, fixed 2, fixed
Impedance Ω 50
VSWR < 1.5 < 1.5 < 1.5 1.5 < 1.65
Isolation Intrasystem > 23, typ. 27 > 23, typ. 27 > 23, typ. 27 > 23, typ. 27 > 20, typ. 24
Intersystem > 25 (R1 // R2, Y1, Y2) > 25 (R1 // R2, Y1, Y2) > 25 (R1 // R2, Y1, Y2) > 25 (R1 // R2, Y1, Y2) > 22 (R1 // R2, Y1, Y2)
dB
> 25 (R2 // R1, Y1, Y2) > 25 (R2 // R1, Y1, Y2) > 25 (R2 // R1, Y1, Y2) > 25 (R2 // R1, Y1, Y2) > 22 (R2 // R1, Y1, Y2)
> 27 (R2 // R1) > 27 (R2 // R1) > 27 (R2 // R1) > 27 (R2 // R1) > 24 (R2 // R1)
Intermodulation dBc < −153 (2 x 43 dBm carrier)
4-Port Omni Antenna
84010793, 84010794
Wideband R2, Y2
1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 2 x 2.4 2 x 3.0 2 x 5.9 2 x 5.9 2 x 6.1
Horizontal Pattern:
Half-power beam width ° 360 (with 1–8 dB nulls LB, 6–16 dB nulls HB, typical)
Vertical Pattern:
Electrical tilt ° 0, fixed 0, fixed 2, fixed 2, fixed 2, fixed
Impedance Ω 50
VSWR < 1.5 < 1.5 < 1.5 1.5 < 1.65
Isolation Intrasystem > 23, typ. 27 > 23, typ. 27 > 23, typ. 27 > 23, typ. 27 > 20, typ. 24
Intersystem > 25 (R1 // R2, Y1, Y2) > 25 (R1 // R2, Y1, Y2) > 25 (R1 // R2, Y1, Y2) > 25 (R1 // R2, Y1, Y2) > 22 (R1 // R2, Y1, Y2)
dB
> 25 (R2 // R1, Y1, Y2) > 25 (R2 // R1, Y1, Y2) > 25 (R2 // R1, Y1, Y2) > 25 (R2 // R1, Y1, Y2) > 22 (R2 // R1, Y1, Y2)
> 27 (R2 // R1) > 27 (R2 // R1) > 27 (R2 // R1) > 27 (R2 // R1) > 24 (R2 // R1)
698–894 1695 –2690 698–894 1695 –2690 698 –894 1695 –2690 698 –894 1695 –2690
–45° –45° +45° +45° –45° –45° +45° +45°
C C C C
R1 R1 R2 R2
Small Cell
Y1 Y1 Y2 Y2
4.3-10 4.3-10 4.3-10 4.3-10
Input 4 x 4.3-10 connector female

Weight kg 18.1
lb 39.9
Wind load N 138
Speed: 150 km/h)
Max. wind km/h 242
velocity mph 150
Mechanical interface Hex nut
(requires a 1½ʺ wrench)
Torque setting:
122 Nm | 90 lbf·ft
inches 29.7 / 18.9 /18.9
inches 24.6 / 16
10-Port Omni Antenna Y1 Y2 P1 P2 O1
Frequency Range 1695–2690 1695–2690 3550–3700 3550–3700 5150–5925
HPBW 360° 360° 360° 360° 360°
10-Port Omni Antenna 5HB 0.6m 360° | 2x1695–2690 6.5dBi | 2x3550–3700 6.5dBi |
5150–5925 5dBi
Type No. 84010555 84010556
Left side, lower highband Y1
1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 5.4 6.1 6.9 7.2
Horizontal Pattern:
Half-power beam width ° 360 (with −7 dB 360 (with −7 dB 360 (with −8 dB 360 (with −9 dB
null, typical) null, typical) null, typical) null, typical)
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5 < 1.5 < 1.5 < 1.65
Isolation Intrasystem > 23 > 23 > 23 > 23
dB
Intersystem > 28 > 28 > 28 > 28
Left side, upper highband Y2

1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 5.6 6.1 6.6 6.8
Horizontal Pattern:
(with −7 dB null, typical) (with −7 dB null, typical) (with −8 dB null, typical) (with −9 dB null typical)
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5 < 1.5 < 1.5 < 1.65
dB
Intersystem > 28 > 28 > 28 > 28
10-Port Omni Antenna
84010555, 84010556
Center, highbands P1 P2
3550– 3700 3550– 3700
Frequency range MHz 3550 – 3700 3550 – 3700
Polarization ° +45, –45 +45, –45
Gain dBi 6.8 7.0
Horizontal Pattern:
Half-power beam width ° 360 (with –12 dB null, typical) 360 (with –12 dB null, typical)
Vertical Pattern:
Half-power beam width ° 26 24
Electrical tilt ° 5, fixed 5, fixed
Impedance Ω 50 50
VSWR < 1.5 < 1.5
Isolation Intrasystem > 25 > 25
dB
Intersystem > 28 > 28
Intermodulation dBc N/A 50 Ω
Max. power per input W 100 (at 50 °C ambient temperature) 100 (at 50 °C ambient temperature)
Right side, highband O1

5150–5925
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
Gain (typical / maximum) dBi 5.0 / 6.0 5.0 / 6.0 4.7 / 6.0 4.8 / 6.0 4.3 / 6.0
Horizontal Pattern:
Half-power beam width ° 360 (with −15 dB null, typical)
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5 < 1.7 < 1.7 < 1.5 < 1.7
Isolation Intrasystem > 25
dB
Intersystem > 28
Intermodulation dBc N/A
Small Cell
Max. input pwer* W .25 – .25 1.0 –
*To comply with EIRP restrictions for FCC Title 47 part 15 for fixed outdoor point to multi-point applications.

Weight kg 15.0
lb 33.0
Wind load N 138
Speed: 150 km/h)
Max. wind km/h 242
velocity mph 150
Torque setting:
122 Nm | 90 lbf·ft
inches 29.7 / 18.9 /18.9
inches 24.6 / 16
14-Port Omni Antenna R1–R2 Y1–Y2 P1–P2 O1
Frequency Range 698–894 1695–2690 3550–3700 5150–5925
HPBW 360° 360° 360° 360°
14-Port Omni Antenna 2LB/5HB 0.6m 360° | 2x698–894 3.3dBi |

2x1695–2690 6.7dBi | 2x3550–3700 5.8dBi |
5150–5925 4dBi
Type No. 84010557 84010558

698–894 698–894
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 2 x 3.1 ± 0.4 2 x 3.5 ± 0.4 2 x 3.0 ± 0.5 2 x 3.6 ± 05
Horizontal Pattern:
Half-power beam width ° 360 (with 1–5 dB null, typical) 360 (with 1–5 dB null, typical)
Vertical Pattern:
Half-power beam width ° 66 ± 6 57 ± 2 62 ± 4 60 ± 3
Impedance Ω 50 50
VSWR < 1.5 1.5
Intersystem > 28 (R1 // Y1, Y2, P1, P2, O1) > 28 (R1 // Y1, Y2, P1, P2, O1)
dB
> 28 (R2 // Y1, Y2, P1, P2, O1) > 28 (R2 // Y1, Y2, P1, P2, O1)
> 20 (R2 // R1) > 20 (R2 // R1)

1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 5.8 ± 0.2 6.8 ± 0.2 6.8 ± 0.2 7.2 ± 0.2
Horizontal Pattern:
Half-power beam width ° 360 (with −10 dB null, 360 (with −10 dB null, 360 (with −10 dB null, 360 (with −10 dB null,
typical) typical) typical) typical)
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5
dB
Intersystem > 28 > 28 > 28 > 28

1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 5.8 ± 0.2 6.3 ± 0.5 7.2 ± 0.3 7.0 ± 0.2
Horizontal Pattern:
Vertical Pattern:
Half-power beam width ° 34 ± 2 31 ± 2 25 ± 1 27 ±1
Impedance Ω 50
VSWR < 1.5
dB
Intersystem > 28 > 28 > 28 > 28
84010557, 84010558
Highband P1, connector 9 – 10 P2, connector 11 – 12
3550–3700 3550–3700
Polarization ° +45, −45 +45, −45
Gain dBi 5.8 ± 0.1 5.8 ± 0.5
Horizontal Pattern:
Half-power beam width ° 360 (with −15 dB null, typical) 360 (with −15 dB null, typical)
Vertical Pattern:
Half-power beam width ° 27.5 ± 2.5 28 ± 0.5
Electrical tilt ° 9 ± 1.5 11 ± 2
Impedance Ω 50 50
VSWR < 1.5 < 1.5
dB
Intermodulation dBc N/A N/A
Highband O1, connector 13 – 14

5150–5925
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 4.2 ± 0.4 3.9 ± 0.7 3.9 ± 0.8 4.0 ± 0.7 3.9 ± 0.1
Horizontal Pattern:
Vertical Pattern:
Half-power beam width ° 32 ± 1 28 ± 1 27 ± 1 27 ± 9 32 ± 9
Electrical tilt ° 12 ±5
Impedance Ω 50
VSWR < 1.5
dB
Intersystem > 28
Small Cell
Max. input power per radio* W 1 – – – –
* To comply with EIRP restrictions for FCC Title 47 part 15 for fixed outdoor point to multi-point applications

Weight kg 18
lb 40
Wind load N 138
Speed: 150 km/h)
Max. wind km/h 242
velocity mph 150
Torque setting:
122 Nm | 90 lbf·ft
inches 29.7 / 18.9 /18.9
inches 24.6 / 16
20-Port Omni Antenna R1, R2 Y1, Y3 Y2, Y4 P1, P2 O1
Frequency Range 698–894 1695–2690 1695–2690 3400–4200 5150–5925
HPBW 360° 360° 360° 360° 360°
20-Port Omni Antenna 2LB/5HB 0.6m 360° | 2x698–894 3.5dBi |

4x1695–2690 9dBi | 2x3400–4200 6.8dBi |
5150–5925 5dBi
Type No. 84010603 84010604

698–894 698–894
Frequency range MHz 698–806 824–894 698–806 824–894
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 2 x 3.5 2 x 3.7 2 x 3.8 2 x 3.8
Horizontal Pattern:
Half-power beam width ° 360 (with 10 dB nulls, typical) 360 (with 10 dB nulls, typical)
Vertical Pattern:
Impedance Ω 50 50
VSWR < 1.5 1.5
Isolation Intrasystem > 23, typ. 27 > 23, typ. 27
Intersystem > 28 (R1 // Y1, Y2, Y3, Y4,P1, P2, O1) > 28 (R1 // Y1, Y2, Y3, Y4,P1, P2, O1)
dB
> 28 (R2 //Y1, Y2, Y3, Y4,P1, P2, O1 > 28 (R2 // Y1, Y2, Y3, Y4,P1, P2, O1)
> 20 (R2 // R1) > 20 (R2 // R1)
Highband Y1, connector 5 – 6; Y3, connector 9– 10

1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 9 9.2 9.2 8
Horizontal Pattern:
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5
dB
Intersystem > 28 > 28 > 28 > 28
To have better performance in 4X4 MIMO, Kathrein recommends that one uses the Y1 & Y3 (four connectors) as one set of MIMO.
84010603, 84010604 Preliminary Issue

Highband Y2, connector 7– 8; Y4, connector 11– 12
1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 8.7 8.7 8.7 8.7
Horizontal Pattern:
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5
dB
Intersystem > 28 > 28 > 28 > 28
Highband P1, connector 13 –14; P2, connector 15 – 16

3400–4200
Polarization ° +45, −45 +45, −45
Gain dBi 6.8 6.8
Horizontal Pattern:
Vertical Pattern:
Half-power beam width ° 28 23
Small Cell
Impedance Ω 50
VSWR < 1.5
dB

84010603, 84010604 Preliminary Issue

Highband O1, connector 17– 18; O2, connector 19 – 20
5150–5925
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
Gain (typical/maximum) dBi 5.0 / 5.8 5.0 / 5.6 5.0 / 6.0 5.5 / 6.0 5.5 / 6.0
Horizontal Pattern:
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5
dB
Intersystem > 28
Max. input power per radio* W 1.0 – 1.0 1.0 –

Weight kg 21-8
lb 48.0
Wind load N 138
Speed: 150 km/h)
Max. wind km/h 242
velocity mph 150
Torque setting:
122 Nm | 90 lbf·ft
inches 29.7 / 18.9 /18.9
inches 24.6 / 16
24-Port Omni Antenna Y1, Y4 Y2, Y5 Y3, Y6 P1, P3 P2, P4 O1, O2
Frequency Range 1695–2690 1695–2690 1695–2690 3400–4200 3400–4200 5150–5925
HPBW 360° 360° 360° 360° 360° 360°
24-Port Omni Antenna 12HB 0.6m 360° | 6x1695–2690 9dBi | 4x3400–4200 7dBi |
2x5150–5925 5dBi
Type No. 84010601 84010602

1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 7.8 ± 0.3 8.0 ± 0.1 8.5 ± 0.1 8.4 ± 0.3
Horizontal Pattern:
Vertical Pattern:
Electrical tilt ° 7±1 6±1 5±1 3±1
Impedance Ω 50
VSWR 7.8 ±0.3 8.0 ±0.1 8.5 ±0.1 8.4 ±0.3
dB
Intersystem > 20 > 20 > 26 > 26
Highband Y2, connector 3 – 4; Y5, connector 9 – 10

1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 7.8 ± 0.3 8.0 ± 0.1 8.9 ± 0.1 8.6 ± 0.3
Horizontal Pattern:
Vertical Pattern:
Electrical tilt ° 8±1 7±1 6±1 4 ±1
Impedance Ω 50
VSWR 7.8 ± 0.3 8.0 ± 0.1 8.5 ± 0.1 8.4 ± 0.3
dB
Intersystem > 20 > 20 > 26 > 26

84010601, 84010602
Highband Y3, connector 5 – 6; Y6, connector 11 – 12
1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 7.9 ± 0.4 8.1 ± 0.1 8.8 ± 0.2 8.3 ± 0.1
Horizontal Pattern:
Vertical Pattern:
Electrical tilt ° 8±1 5±1 5±1 3±1
Impedance Ω 50
VSWR < 1.5 < 1.5 < 1.5 < 1.7
dB
Intersystem > 20 > 20 > 26 > 26
Highband P1, connector 13 – 14; P3, connector 17– 18

3400–4200
Frequency range MHz 3400 – 3700 3700 –4200
Polarization ° +45, −45 +45, −45
Gain dBi 6.9 ±0.25 7.0 ±0.1
Horizontal Pattern:
Vertical Pattern:
Half-power beam width ° 22.5 ± 0.5 232.5 ± 1.5
Electrical tilt ° 9 ±2 7 ±2
Impedance Ω 50 50
VSWR < 1.5 < 1.5
dB
To have better performance in 4X4 MIMO, Kathrein recommends that one uses the P1 & P3 (four connectors) as one set of MIMO.
Highband P2, connector 15 –16; P4, connector 19 – 20

3400–4200
Polarization ° +45, −45 +45, −45
Gain dBi 7.0 ± 0.2 7.1 ± 0.3
Horizontal Pattern:
Vertical Pattern:
Half-power beam width ° 23 ± 1.5 23 ± 2
Electrical tilt ° 9±2 7±1
Impedance Ω 50 50
VSWR < 1.5 < 1.5
dB
To have better performance in 4X4 MIMO, Kathrein recommends that one uses the P2 & P4 (four connectors) as one set of MIMO.
84010601, 84010602
Highband O1, connector 21 – 22; O2, connector 23– 24
5150–5925
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
Gain (typical/maximum) dBi 4.9 / 5.9 4.8 / 5.2 5.0 / 5.6 4.9 / 5.5 4.4 / 4.9
Horizontal Pattern:
Vertical Pattern:
Half-power beam width ° 21 ± 0.5 19 ± 1 19 ± 0.5 20 ± 0.5 19 ± 1
Impedance Ω 50
VSWR < 1.5
dB
Intersystem > 28
Max. input power per radio* W 1.0 – 1.0 1.0 –
Small Cell

Weight kg 22.2
lb 49.0
Wind load N 138
Speed: 150 km/h)
Max. wind km/h 242
velocity mph 150
Torque setting:
122 Nm | 90 lbf·ft
inches 29.7 / 18.9 /18.9
inches 24.6 / 16
2-Port Kathrein
Inside Connect Y1
Dual Polarization X
HPBW hor. 75°
Gain 8dBi
2-Port Kathrein Inside Connect HB 75° | 1695–2690 8dBi

Type No. 80020100
Use Case integration into enclosure
(e. g. street furniture)
Highband Y1
1695–2690
Frequency range MHz 1695 – 2690
Polarization ° +45, −45
Gain dBi max. 8
Horizontal Pattern:
Half-power beam width ° 75 (±5)
Front-to-back ratio, copolar
dB typ. > 25
(180°±30°)
Cross polar ratio 0° dB typ. > 24
Cross polar ratio
dB > 10
over sector ±60°
Vertical Pattern:
Half-power beam width ° 75 (±5)
Impedance Ω 50
VSWR < 1.9
Max. power per antenna W 40 (at 50 °C ambient temperature)
Material: Reflector: Aluminum.
Radome: PC, colour: White.

Connector position back
Operating temperature °C −20 … 70
range
Fire load kWh 1.4
Fire protection UL 94-V2
Height / width / depth mm 121.5 / 124 / 74
incl. modular mounting inches 4.8 / 4.9 / 2.9
parts
Category of see accessory parts and
mounting hardware mounting options
Weight kg 0.4
lb 0.9
inches 6.1 x 6.1 x 3.1
Protection class IP 56
Scope of supply Antenna and mounting parts:
1x 0107670, 2x 0107672
Mounting interface Screw M6,
max. screw head height:
6 mm | 0.24 inches,
max. screw head diameter:
13.5 mm | 0.53 inches
Further mounting parts (please order separately)
Type No. Description

85010205 Package with mounting parts
214
Kathrein Inside Connect
Accessory parts 85010205 for 80020100
Modular mounting parts package
Type No. of the package 85010205

Number of pieces
Modular mounting part Part number Function
included
0107671 6 pcs. Back to back installation,

mounting and stabilization interface
0107670 3 pcs. Side by side / stacked installation,

mounting and stabilization interface
0107669 4 pcs. High isolation spacer
0107673 3 pcs. Additional stabilization element
Small Cell
215
2-Port Antenna Y1
HPBW 65°

Type No. 80020711
Highband Y1
1710–2690
Polarization ° +45, –45 +45, –45 +45, –45 +45, –45
Gain dBi 8.7 9.2 9.6 9.8
Horizontal Pattern:
Half-power beam width ° Approx. 67 Approx. 62 Approx. 55 Approx. 53
Front-to-back ratio, copolar
dB > 24 > 24 > 22 > 22
(180°±30°)
Cross polar ratio 0° dB Typically: 20 Typically: 20 Typically: 24 Typically: 24
Cross polar ratio
dB > 10 >9 >8 >8
sector corner ±60°
Vertical Pattern:
Half-power beam width ° Approx. 66 Approx. 60 Approx. 55 Approx. 53
Impedance Ω 50
VSWR < 1.5
Max. power per antenna W 150 (at 50 °C ambient temperature)

mph 124
inches 6.1 / 6.1 / 2.7
Category of L (Light)
mounting hardware
inches 10.1 x 6.8 x 3.6
Scope of Supply Panel and 1 unit of tension
bands for 45–125 mm |
HPBW 65° 65°
2-Port Antenna LB/HB 0.3m C 65° | 790–960 8dBi | 1710–2690 9dBi

Type No. 80010753
R1 Y1
790–960 1710–2690
Frequency range MHz 790 – 862 824 – 894 880 – 960 1710 – 1990 1920 – 2200 2200 – 2490 2490 – 2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
Average gain dBi 2 x 7.8 2 x 8.0 2 x 8.5 2 x 7.8 2 x 8.9 2 x 8.7 2 x 8.2
Horizontal Pattern:
Front-to-back ratio dB Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25 Copolar: > 25
Cross polar ratio
Maindirection 0° dB Typically: 15 Typically: 18 Typically: 20 Typically: 25 Typically: 25 Typically: 25 Typically: 25
Sector ±60° >8 >8 >8 > 10 > 10 > 10 > 10
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5
Isolation: Intrasystem dB > 30 > 30 > 27 > 25
Intermodulation IM3 dBc < −150 dBc (2 x 43 dBm carrier)
Max. effective power
W 200 (at 50 °C ambient temperature) 100 (at 50 °C ambient temperature)
per port
for the antenna
1710 –2690 790–960 790 –960 1710–2690

–45° –45° +45° +45°
C C
7-16 7-16
Small Cell

mph 124
inches 13.1 / 10.2 / 5.4
Category of
L (Light)
mounting hardware
inches 19.5 x 10.7 x 6.2
Scope of Supply Panel and 1 unit of tension
bands for 45–125 mm |
10-Port Antenna Y1 Y2 P1 P2 O1
Frequency Range 1695–2690 1695–2690 3550–3700 3550–3700 5150–5925
HPBW 65° 65° 65° 65° 65°
10-Port Antenna 5HB 0.6m 65° |2x1695–2690 14dBi | 2x3550–3700 11dBi |

5150-5925 5dBi
Type No. 84010564
1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 13.1 ±0.4 14 ±0.4 14.2 ±0.8 14.6 ±0.8
Horizontal Pattern:
Half-power beam width ° 73 ±2 61 ±2 53 ±2 48±2
Front-to-back ratio, dB 24 26 29 27
total power, ± 30°
Cross polar discrimination
dB 21 21.5 24.5 19
at Boresight (Typ)
Vertical Pattern:
Half-power beam width ° 18 ±1 17 ±1 16 ±2 15 ±2
First upper sidelobe
dB 16 21 20 20
suppression
Impedance Ω 50 Ω
VSWR < 1.5 < 1.5 < 1.5 < 1.7
dB
Intersystem > 28 > 28 > 28 > 28
Highband P1, connector 5– 6; P2, connector 7– 8

3550–3700
Gain dBi 11 ±0.5
Horizontal Pattern:
Half-power beam width ° 65 ±7
Vertical Pattern:
Electrical tilt ° 5.5 ±0.5, fixed
Impedance Ω 50 Ω
VSWR < 1.5
dB
Intersystem > 28
10-Port Antenna
84010564
Highband O1, connector 9 –10
5150–5925
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
Gain (typical/maximum) dBi 5.3 / 5.84 5.0 / 5.31 5.3 / 5.81 5.3 / 5.81 5 / 5.48
Horizontal Pattern:
Vertical Pattern:
Half-power beam width ° 32 ±4 35 ±4 30 ±2 21 ±2 23 ±2
Electrical tilt ° 12 ±6, fixed
Impedance Ω 50
VSWR < 1.5
dB
Intersystem > 32
Max. input power per radio* W 1 – – – –
Small Cell
Connector Position bottom
Adjustment Mechanism FlexRET,
Max. Wind Velocity km/h 242
mph 150
inches 24.0 / 14.9 / 6.7
Mounting Hardware
Weight kg 12.7
lb 28.0
inches 32.0 / 15.6 / 8.3
for 42–115 mm |
4-Port Micro Cell Antenna 1695–2690 1695–2690
Dual Polarization X X
HPBW 85° 85°
Antenna in upright
pole installation
4-Port Micro Cell Antenna 2HB 0.5m 85° | 2x1695–2690 7.5dBi
Type No. 80010843
Use case Flexible Indoor Coverage
Flexible Street Level Micro Cell Coverage
Not for Macro Site Installation
Pole and wall mounting
Electrical data Per sector
1695–2690
Gain dBi 7.5
Horizontal Pattern:
Half-power beam width ° 85
Cross polar ratio 0° dB ≥ 18 typ.
60° ≥ 8 typ.
Vertical Pattern:
Half-power beam width ° 80 Connectors (4.3-10)
Electrical tilt ° 0, fixed covered by end cap
(upright installation)
Impedance Ω 50 Ω
VSWR 1695 –1710 MHz: < 1.6
1710–2200 MHz: < 1.5
2200–2690 MHz: < 1.6
Isolation, between all dB ≥ 25 (Intra- / Intersystem)
ports
Top view / connector view Mechanical specifications

(2 x top, 2 x bottom,
covered by end cap)
Adjustment Two continuously rotatable antenna
mechanism modules (radiator and reflector)
within the radome (set by hand)
Tilt adjustment Set by hand
mechanism Continuously for each sector
(installation at right (0° … 360°)
angle)
Azimuth adjustment Set by hand
mechanism (upright Continuously for each sector
installation) (0° … 360°)
IP Protection class IP65
Wind load N 25
(at 150 km/h) lbf 5.6
Max. wind km/h 160
velocity mph 99.4
Feeder cables Max. ¼˝ High Flex (bending radius
≤ 25 mm | ≤ 1.0 inches)
push pull and handscrew type,
angular connector required
1695 - 2690 Allowed mm ≥ 40
diameter of inches ≥ 1.6
mounting pole
Max. distance mm 190
wall/pole inches 7.5
when mounted
Height / mm 526 / 100
diameter inches 20.7 / 3.9
Category of L (Light)
mounting hardware
Weight kg 2.0
lb 4.4
Packing size mm 547 / 242 / 174
inches 21.5 / 9.5 / 6.9
220
8-Port Two-Sector 0° 180° 0° 180°
Frequency Range 698–960 698–960 1695–2690 1695–2690
HPBW 65° 65° 65° 65°
8-Port Two-Sector Antenna LB/HB 0.6m 65° | 2x698–960 11dBi |

2x1695–2690 13dBi with GPS
Type No. 80010713 80010714
Lowband Electrical data per sector
698–960
Polarization ° +45, −45 +45, −45 +45, −45
Gain dBi 10.0 10.6 11.0
Horizontal Pattern:
Maindirection 0° Typically: 20 Typically: 30 Typically: 30
Sector ±60° >8 >8 >8
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5
Intersystem dB > 26, typ. 30 > 23, typ. 30
(698–894 // 1695–2690) (880–960 // 1695–2690)
for the antenna
High band Electrical data per sector

1695 – 2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 13.3 13.3 13.5 13.5 14.0
Horizontal Pattern:
Front-to-back ratio, copolar dB > 30 > 30 > 30 > 30 > 30
Small Cell
Maindirection 0° Typically: 25 Typically: 25 Typically: 25 Typically: 25 Typically: 25
Sector ±60° >8 >8 > 10 > 10 >6
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5
Isolation Intrasystem > 25 > 28 > 28
dB
Intersystem > 30 (1695–2690 // 698–960)
for the antenna

beam width
Max. wind km/h 242
DC power Vdc +3–5.5, 18–25 mA Packing size mm 755 x 480 x 480
Through N output connector inches 29.7 / 18.9 /18.9
Temperature range °C −35 to +70 Height / diameter mm 626 / 407
inches 24.6 / 16
Tri-Sector Slimpole Antenna 0° 120° 240°
Frequency Range 1710–2690 1710–2690 1710–2690
Dual Polarization X X X
HPBW 80° 80° 80°
6-Port Tri-Sector Slimpole HB 0.7m 80° | 1710–2690 10dBi

Type No. 80020125 Electrical datas
per sector
1710–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 2 x 9.5 2 x 10 2 x 10.5 2 x 11
Horizontal Pattern:
width
691 mm | 27.2 inches

Front-to-back ratio, dB > 30 > 28 > 28 > 27
copolar
Maindirection 0° Typically: 20 Typically: 20 Typically: 20 Typically: 20
Sector ±60° > 10 > 10 > 10 > 10
Vertical Pattern:
width
Impedance Ω 50
VSWR < 1.5
Isolation, dB > 25
between ports
0°
4.3-10 4.3-10
−45° +45°
1710–2690
+45° −45°
4.3-10 4.3-10
1710–2690 1710–2690
−45° +45°
240° 120°
4.3-10 4.3-10

Weight kg 2.3
lb 5.1
Wind load N 50
(at 150 km/h) lbf 11.2
mph 124
Mechanical interface Flange connection 8 x M6
at a graduated diameter of
Evenness of the opposite surface:
0.5 mm | 0.02 inches
inches 29.2 x 8.7 x 8.6
inches 27.2 / 3.9
222
12-Port Tri-Sector Antenna 0° 120° 240° 0° 120° 240°
Frequency Range 698–960 698–960 698–960 1695–2690 1695–2690 1695–2690
Dual Polarization X X X X X X
HPBW 65° 65° 65° 65° 65° 65°
12-Port Tri-Sector Antenna 3LB/3HB 0.6m 65° | 3x698–960 11dBi |
3x1695–2690 13dBi with GPS
Type No. 80010775 80010776
Lowband Electrical data per sector
698–960
Polarization ° +45, −45 +45, −45 +45, −45
Gain dBi 2 x 10.0 2 x 10.6 2 x 11.0
Horizontal Pattern:
Cross polar ratio
Sector ±60° > 10 >8 >8
Vertical Pattern:
Impedance Ω 50
VSWR < 1.5
Intersystem dB > 26, typ. 30 > 23, typ. 30
(698–894 // 1695–2690) (880–960 // 1695–2690)
Max. power for the antenna W 900 (at 50 °C ambient temperature)
Highband Electrical data per sector

1695–2690
Polarization ° +45, −45 +45, −45 +45, −45 +45, −45 +45, −45
Gain dBi 2 x 13.5 2 x 13.5 2 x 13.2 2 x 13.5 2 x 14.0
Horizontal Pattern:
Front-to-back ratio, copolar dB > 30 > 30 > 30 > 30 > 30
Maindirection 0° Typically: 25 Typically: 25 Typically: 25 Typically: 25 Typically: 25
Sector ±60° >9 >9 >8 >8 >8
Vertical Pattern:
Half-power beam width ° 18 17.5 16.5 14.5 14
Impedance Ω 50
VSWR < 1.55 < 1.6 < 1.5
dB
Intersystem > 30 (1695–2690 // 698–960)

beam width
Max. wind km/h 242
DC power Vdc +3–5.5, 18–25 mA Packing size mm 755 x 480 x 480
Through N output connector inches 29.7 / 18.9 /18.9
Temperature range °C −35 to +70 Height / diameter mm 626 / 407
inches 24.6 / 16
Street Connect
2-Port Antenna Y1
Dual Polarization VV
HPBW 360°
2-Port Street Connect HB 360° | 1695–2690 6dBi

Type No. 80010235
Use Case In-Ground Installation, High traffic urban areas
High band Y1, connector 1– 2
1695 – 2690
Max. Gain (Free Space) dBi 7.3 7.4 7.3 5.7 7.1
Horizontal Pattern Quasi Omni Quasi Omni Quasi Omni Quasi Omni Quasi Omni
Max. Deviation Max. Deviation Max. Deviation Max. Deviation Max. Deviation
from Circularity from Circularity from Circularity from Circularity from Circularity
±6 dB ±6 dB ±5 dB ±5 dB ±6 dB
Vertical Pattern Four main lobes Four main lobes Six main lobes Four main lobes Four main lobes
above ground level above ground level above ground level above ground level above ground level
Isolation (Port 1 // Port 2) 1695–2300 MHz: > 20
dB
2300–2690 MHz: > 25
Max. Effective Power per
Port

VSWR < 1.7 Connector Position Bottom
Return Loss dB > 11.7 Adjustment Mechanism Set by hand,
Passive Intermodulation dBc < −153 (2 x 43 dBm carrier) Horizontal 9° steps
Polarization Dual Vertical Feeder Cables Push Pull type connector
Max. Effective Power 40 (at 50 °C ambient Top Cover mm 375 / 32
for the Antenna W Diameter / Height inches 14.8 / 1.3
temperature)
Top Frame Outer / mm 480 / 315 / 100
Inner Diameter / Height inches 18.9 / 12.4 / 3.9
Antenna Modul mm 310 / 136
Diameter / Height inches 12.2 / 5.4
Weight kg 3.2
Top Cover Antenna Module lb 7.1
Weight kg 13.6
Complete System lb 30.0
IP Protection Class IP 68 (with appropriate feeder
cable connector)
Antenna Module Max. Load Top Cover kN 50 (without permanent
with Radiating deformation, according
System EN 124 – Class D400)
Mounting:
Follow the installation guidelines for Polieco Kio D400 / EN 124
Damping and top cover and frame. Feeder cable to be installed strain-
relieved. Maximum force 5 N per cable. Avoid mounting
Horizontal locations where obstructions may have impact on the antenna
Adjustment Element performance, e.g. parking cars.
Recommended tightening torque for the cover screws (2x):
50 Nm.
Attention: Please follow the mounting and instruction guide
lines carefully. Liability cannot be assumed for damages as
Top Frame a result of unsatisfactory fitting and installation, improper
putting into service, incorrect operation and maintenance,
as well as any alterations or modifications carried out by the
operator and accessory parts by the customer.
Remark:
All electrical values are stated for the complete system with
top frame and cover.
Accessories (order separately if required)
Type No. Description Items per Unit
85010210 Locking Tool 1

for Kathrein Street Connect
85010211 Locking Screws 2
for Kathrein Street Connect
224
VPol
690...2690 MHz
Vertical Polarization
1-Port LogPer 690–2690 67° 11dBi 0°T 742192V02 300 7-16, bottom 226
1-Port Antenna 1710–2180 12° 18.5dBi 0°T 80010368 299 7-16, side 227
1-Port BiDir 694–960/1710–2690 65° 5dBi 0°T 80020448 428 4.3-10, bottom 228
1-Port Yagi 790–960 C 38° 14dBi 0°T 80010828V01 170 7-16, rearside 229
1710–2170 28° 15.5dBi 0°T
VPol
Abbreviations:
225
1-Port LogPer Antenna 690–2690
Vertical Polarization V
Half-power Beam Width 67°
1-Port LogPer Antenna 690–2690 67° 11dBi

Type No. 742192V02
Frequency range MHz 690 – 880 880 – 960 960 – 1695 1695 – 2200 2200 – 2490 2490 – 2690
VSWR < 1.6 < 1.5 < 1.5 < 1.5 < 1.5 < 1.5
Gain dBi 10.1 10.6 11.0 11.0 11.0 11.0
Impedance Ω 50 50 50 50 50 50
Polarization Vertical Vertical Vertical Vertical Vertical Vertical
Front-to-back ratio db > 25 > 25 > 25 > 25 > 22 > 25
Half-power beam width °
horizontal 69 64 57 53 47 45
vertical 54 53 50 48 46 44
Intermodulation IM3 dBc < −150 < −150 < −150 < −150 < −150 < −150
(2 x 43 dBm carrier)
Max. power W 300 300 250 200 170 150
Total power W 500 (at 50 °C ambient temperature)

Wind load N | lbf Frontal 20 | 4
(at Rated Wind Lateral 210 | 47
Speed: 150 km/h) Rearside 30 | 7
mph 150
inches 11.8 / 6.1 / 30.9
Weight kg 5.5
lb 12.1
inches 14.2 x 6.9 x 39.4
226
1-Port Antenna 1710–2180
HPBW 12°

Type No. 80010368
1710–2180
Polarization Vertical Vertical Vertical
Gain dBi 18.1 18.4 18.7
Horizontal Pattern:
Half-power beam width ° 13.3 12.8 12
Sidelobe suppression dB > 18 > 18 > 17
Vertical Pattern:
Sidelobe supression for first
dB > 18 > 18 > 18
sidelobe above main beam
Impedance Ω 50
VSWR < 1.5
VPol

Connector position Side (see picture)
mph 124
inches 11.8 / 29.3 / 2.7
Weight kg 9
lb 19.8
inches 17.4 x 33.5 x 4.9
1-Port BiDir Antenna 694–960/1710–2690
HPBW 65°
1-Port Bi-Directional Antenna LB/HB 0.4m 65° |

694–960/1710–2690 5dBi
Type No. 80020448
Frequency range MHz 694 – 960, 1710 – 2690
VSWR 694–960 MHz: < 2.0
1710–2690 MHz: < 1.7
Gain dBi 694–806 MHz: 5.0
806–960 MHz: 5.5
171 –2690 MHz: 6.5
Impedance Ω 50
Polarization Vertical
Intermodulation IM3 dBc < −150 ( 2 x 43 dBm carrier)
Max. power (total) W 200 (at 50 °C ambient temperature)
Weight kg 1.1
lb 2.4
Wind load N | lbf Frontal: 30 | 6.7
(at 150 km/h) Lateral: 70 | 15.7
Rearside: 35 | 7.9
mph 124
inches 17.7 x 8.1 x 4.3
inches 16.9 / 7.1 / 3.1
Fire load kWh 4.46
Material: Radiator: Tin-plated copper.

Reflector: Weather-proof aluminum.
Radome: High impact plastic, color: Grey.
All screws and nuts: Stainless steel.
Mounting: Wall mounting: No additional mounting kit
needed.
For pipe mast mounting use clamps listed below
(order separately).
Ice protection: The radiating system is protected by the radome.
Due to its very sturdy construction, the antenna
remains operational even under icy conditions.
Grounding: All metal parts of the antenna as well as the
inner conductor are DC grounded.
228
1-Port Yagi Antenna 790–960 1710–2170
Dual Polarization +45° −45°
HPBW 38° 28°
Gain 14dBi 15.5dBi
Integrated Combiner C
1-Port Yagi Antenna LB/HB 1.1m C 38°/28° | 790–960 14dBi | /1710–2170 15.5dBi
Type No. 80010828V01
790–960 1710–2170
VSWR < 1.5 < 1.5 < 1.5 < 1.5
Gain (average) dBi 13 14 13 15.5
Impedance Ω 50 50 50 50
Polarization ° +45 +45 −45 −45
Front-to-back ratio dB ≥ 25 ≥ 25 ≥ 27 ≥ 27
Half-power beam width
(avg.) 38 32 28 22
°
horizontal 38 32 28 22
vertical
Max. power W 85 (at 50 °C ambient temperature) 15 (at 50 °C ambient temperature)
Integrated combiner The insertion loss is included in the given antenna gain values.
Please note: This antenna is suitable for tunnel applications.
790–960 1710–2170
+45° –45°
VPol
7-16

Wind load
(at Rated Wind N | lbf 200 | 45
Speed: 150 km/h)
mph 134
Dimensions mm 1184 / ∅ 170
inches 46.6 / ∅ 6.7
inches 53.1 x 10.2 x 8.7
229
230
Summary – Omnidirectional Antennas
VPol
694...2700 MHz
Type Type No. Connector Height Remarks Page
female [mm]
Lowband
1-Port Omni 806–894 360° 11dBi 0°T 738192 7-16 3237 232
1-Port Omni 870–960 360° 11dBi 0°T 736347 7-16 3033 233
Lowband | Highband
1-Port Omni 694–960/1695–2700 360° 2dBi 0°T 80010846 N 202 indoor/outdoor 234
Highband
1-Port Omni 1695–2700 360° 2dBi 0°T 80010431 N 115 indoor/outdoor 235
Omni
231
1-Port Omni Antenna 806–894
1-Port Omni Antenna LB 3.2m 360° | 806–894 11dBi

Type No. 738192
Gain dBi 11
Impedance Ω 50
VSWR < 1.5
Intermodulation IM3 dBc < −150 ( 2 x 43 dBm carrier)
Max. power W 500 (at 50 °C ambient temperature)
3237 mm | 127.4 inches

Mounting: The antenna can be attached laterally at the
tip of a tubular mast of 50–94 mm |
2.0–3.7 inches diameter with two U-bolt brackets
supplied with the antenna (connecting cable
runs outside the mast).
Material: Radiator: Copper and brass.

Radome: Fiberglass, color: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Grounding All metal parts of the antenna as well as the

inner conductor and the mounting kit are
DC grounded. The inner conductor is capacitively
coupled.
Lightning protection: The antenna is designed to withstand a lightning

current of up to 150 KA (impulse: 10/350 µs),
according to IEC 62305 parts 1–4 and
VDE 0855-300, and thereby fulfils the require-
ments of lightning protection class II. Grounding
cross-section: 22 mm2 copper.
Input 7-16 female

Wind load
(at Rated Wind N | lbf 230 | 52
Speed: 150 km/h)
um
maximtop
mast Max. wind velocity km/h 180
mph 112
Height mm 3237
230
inches 127.4
Radome diameter mm 51
150
inches 2.0
Weight kg 8.5
lb 18.7
104 inches 138.4 x 5.8 x 4.4
232 Brackets for side mounting (see page 282)

1-Port Omni Antenna LB 3.0m 360° | 870–960 11dBi

Type No. 736347
Frequency range MHz 870 – 960 MHz
Gain dBi 11 dBi
Impedance Ω 50
VSWR < 1.5
3033 mm | 119.4 inches

Mounting: The antenna can be attached laterally at
the tip of a tubular mast of 50–94 mm |
2.0–3.7 inches diameter with two U-bolt brackets
supplied with the antenna (connecting cable
runs outside the mast).
Material: Radiator: Copper and brass.

Radome: Fiberglass, color: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Anti-static protection: All metal parts of the antenna as well as the

supplied clamp attachment are grounded.
The inner conductor is capacitively coupled.
Lightning protection: The antenna is designed to withstand a lightning

current of up to 150 KA (impulse: 10/350 µs),
according to IEC 62305 parts 1–4 and
VDE 0855-300, and thereby fulfils the require-
ments of lightning protection class II. Grounding
cross-section: 22 mm2 copper.
Input 7-16 female

Omni
Wind load (at Rated

Wind Speed: 150 km/h) N | lbf 210 | 47
um Max. wind velocity km/h 200

maximtop
mast mph 124
Height mm 3033
inches 119.4
230
inches 2.0
150
Weight kg 8.0
lb 17.6
inches 130.6 x 5.8 x 4.4
104
Brackets for side mounting (see page 282) 233

1-Port Omni Antenna 694–960/1695–2700
Indoor and outdoor use
1-Port Omni Antenna LB/HB 0.2m 360° | 694–960/1695–2700 2dBi

Type No. 80010846
Input 1 x N female
Frequency range MHz 694 – 960 / 1695 – 2700
VSWR MHz 694 – 864 864 – 894 894 – 960 1695 – 2700
< 2.0 < 2.2 < 2.5 < 2.0
Gain dBi 2
Impedance Ω 50
Weight g 210
lb 0.46
202 mm | 8.0 inches

Wind load N 6
(at 150 km/h) lbf 1.3
inches 1.2
Height mm 202
inches 8.0
Fire load kWh 0.2
Material: Radiator: Brass.

Radome: Fiberglass, colour: White.
Mounting: One hole mounting (16 mm | 0.6 inches diameter) to

surfaces of max. 10 mm | 0.4 inches thickness.
234
Indoor and outdoor use
1-Port Omni Antenna HB 0.1m 360° | 1695–2700 2dBi

Type No. 80010431
Input 1 x N female
VSWR < 1.8
115 mm | 4.5 inches

Gain dBi 2
Impedance Ω 50
Weight g 150
lb 0.33
inches 0.8
Height mm 115
inches 4.5
Fire load kWh 0.07
Material: Radiator: Brass.

Radome: Fiberglass, color: White.
Mounting: One hole mounting (16 mm | 0.6 iches diameter)

to s urfaces of max. 10 mm | 0.4 inches thick-
ness.
Grounding: All metal parts of the antenna and the mounting

kit are DC grounded. The inner conductor is not
DC grounded.
Omni
235
236
Summary – Remote Electrical Tilt (RET)
Type Type No. Page
Kathrein’s Remote Electrical Tilt System

General Information 238
Data Sheets of RET Components
Slimline Remote Control Unit (RCU) 86010148V01 240
FlexRET Module 86010153V01 241
86010156 242
Antenna Line Configurator (ALC)
86010158 243
Portable Control Adapter (PCA) 86010046 244
Power Supply and Signal Cable 86010007, ... 245
Torque Screwdriver 85010080 245
Site Sharing Adapter (3-way) 86010154 246
Site Sharing Adapter (6-way) 86010155 247
Gender Adapter for FlexRET 86010162 248
Port Extender for FlexRET 86010163 249
DC Power and Signal Splitter 86010002 250
Lightning Protection Device 86010030 251

RET
Earthing Clamp 86010031 252
Protection Caps for RET Spindle 85010004 286
78211055, -56, -65, -66 394 –

Smart Bias Tee
78211592, -93, -96, -97 399

237
Functionality of Different RET Technologies
RCU with RFID Feature

• External RCU 86010148V01 includes a RFID reader
• Antenna spindles are equipped with RFID tags
• The antenna specific data is stored on this tag:
a Type number
a Serial number
a Configuration File
• With power on, the data is read out automatically from the
tag by the RCU
• List of all updated antennas on our website:
www.kathrein.com/rfidspindle
FlexRET
• Integrated RET module inside the antenna (86010153V01)
• Pre-configured with the antenna specific parameters:
a Type number
a Serial number
a Configuration file
• Calibrated ex-factory
• The FlexRET module is exchangeable
a Automatic data transfer in case of exchange with
internal RFID tag
a Only calibration is neccessary
• Daisy chain possibility with FlexRET antennas and / or
external RCUs
• Same module for all antennas
• SingleRET or MultiRET selection possible
• Array allocation possible with special Site Sharing Adapter
or Gender Adapter / Port Extender
Site Sharing Adapter

• Needed whenever the AISG control of a FlexRET antenna
shall be performed by a higher number of base stations
(BTS)
• 2 different realizations available
a 3-way Site Sharing Adapter: Type no. 86010154 –
FlexRET control with up to 3 BTS
a 6-way Site Sharing Adapter: Type no. 86010155 – FlexRET
control with up to 6 BTS
• Daisy chaining of up to 3 FlexRET antennas 86010154 3 x AISG in
• Additional ALDs can be mounted prior to the Site Sharing 1 x FlexRET out
Adapter
• Flexible allocation of antenna arrays to the different BTS
units using a special software application via PC
• Each BTS can act independently
BTS or BTS or BTS or
• Individual password protection of configuration possible Operator A Operator B Operator C
• Configuration can be sent to the Site Sharing Adapter with
every AISG control device (BTS or e.g. Kathrein ALC)
238
Functionality of Different RET Technologies
Gender Adapter (86010162)

• Can be used if 2 base stations (BTS) are interconnected to
one common FlexRET antenna
• Mounted on the FlexRET output of the module
• Converts the AISG output to an AISG input
• The allocation of the antenna arrays can easily be
performed during the commissioning process via the BTS
Port Extender (86010163)

• Can be used if 2 BTS are interconnected to common
FlexRET antennas in daisy chain
• Mounted on the FlexRET module by 2 screws
• Converts 1 FlexRET input and output to 2 FlexRET inputs and
outputs
• Daisy chaining with further FlexRET antennas and / or
external RCUs
• The allocation of the antenna arrays can easily be
performed during the commissioning process via the BTS
Manuals for all our AISG control devices and for the Site Sharing Adapter as well as the corresponding software downloads can be
found on our website in the section “Technical Documents” respectively “Driver and Software”.
For details of the RET system please also see Kathrein’s RET brochure.
Remote Electrical Tilt System MOBILE

COMMUNICATION
Overview of Products, Installation,

RET
Control Possibilities and FAQs
Kathrein’s overall RET system works

in accordance with the AISG (Antenna
Interface Standards Group) standard
and 3GPP (3rd Generation Partnership
Project).
239
Remote Control Unit (RCU)
Remote Control Unit (RCU) for Kathrein base station antennas with adjustable electrical down-tilt
and appropriate mechanical interface.
• Compliant to AISG 1.1 and 3GPP/AISG 2.0 • Daisy Chain feasibility
• Compact size • Suitable for operation under outdoor conditions
• Prepared for automatic configuration and calibration
Type No. 86010148V01

Protocols compliant to AISG 1.1 and 3GPP/AISG 2.0
Logical interface ex factory 1) 3GPP/AISG 2.0
Input voltage range V 10 ... 30 (pin 1, pin 6)
Power consumption W < 1 (stand by); < 10 (motor activated)
Connectors 2) 3) 2 x 8 pin connector according to IEC 60130-9; according to AISG
Daisy chain in: male; Daisy chain out: female
Hardware interfaces RS 485A/B (pin 5, pin 3);
power supply (pin 1, pin 6); DC return (pin 7);
according to AISG / 3GPP
Adjustment time (full range) sec 40 (typically, depending on antenna type)
Adjustment cycles > 50,000
Temperature range °C −40 … +60
Lightning protection AISG interface (each pin)
2.5 kA (10/350 µs)
8 kA (8/20 µs)
Housing material Profile: Aluminum anodized; cover: Aluminum die cast coated
Weight kg 0.5
Ibs 0.99
inches 9.6 x 3.6 x 4
Dimensions (H x W x D) mm 177.5 x 59.5 x 49.5
inches 7.0 x 2.3 x 1.9
1)
he protocol of the logical interface can be switched from 3GPP/AISG 2.0 AISG 1.1 to with a vendor
T
specific c ommand. Start-up operation of the RCU is only possible in a RET system supporting 3GPP/
AISG 2.0!
The protocol can also be changed as follows: 3GPP to AISG 1.1: Enter “AISG1” into the additional data
field “Installer’s ID” and perform a layer 2 reset or a power reset. AISG 1.1 to 3 GPP: Enter “3GPP” into
the additional data filed “Installer’s ID” and perform a layer 7 reset or a power reset. After switching
the protocol any other information can be entered into the “Installer’s ID” field.
Please note: Daisy chain in Daisy chain out
If the Primary of the RET system doesn’t support the standard of the ‘logical interface ex factory’, (male) (female)
the RCU must be switched to the appropriate standard of the Primary before installation. Please
contact Kathrein for further information.
2)
The tightening torque for fixing the connector must be 1.0–1.5 Nm. The connector should be
tightened by hand or using the torque screwdriver (85010080) as described in the connecting
cable data sheet (85010007, ...)
3)
The RCU gets the information stored in the antenna after power on automatically if a corre-
sponding a
ntenna is used. In this case, it is not necessary to configurate the RCU manually.
Standards: EN 60950-1 (Safety)
EN 60950-22 (Safety – Equipment installed outdoor)
Bottom view of RCU
EN 55022 (Emission)
EN 55024 (Immunity)
ETS 300019-1-4 (Environmental)
UL 60950-1; 1st edition
EU-RED Hereby, Kathrein SE declares that the radio equipment type
86010148V01 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet
address: http://www.kathrein.com
Certification: CE, FCC
Scope of supply: Remote Control Unit, Assembly paste
173.6 | 6.8 49.5 | 1.95

59.5 | 2.34
∅ 46 | 1.8
M42x1.5
28.5 | 1.1
8 | 0.31
33.2 | 1.27
240
FlexRET
A flexible, integrated solution for adjusting the electrical downtilt of Kathrein FlexRET antennas.
•Compliant to 3GPP/AISG 2.0 •Daisy Chain feasibility

•Single RETs or Multi RET displayed •Pre-configured
•Two way antenna sharing feasibility
Type No. 86010153V01

Protocols compliant to 3GPP/AISG 2.0
Logical interface ex factory 3GPP/AISG 2.0
Operates as Single RETs or Multi RET
Ex factory Single RETs
Input voltage range V 10 ... 30 (pin 6)
Power consumption W Typically < 1; < 10 (motor activated)
Connectors 2 x 8 pin connector according to IEC 60130-9; according to AISG-C 485
power supply (pin 6); DC return (pin 7);
Adjustment time sec 40
(full range) (typically, depending on antenna type)
Adjustment cycles > 50,000
Temperature range °C –40 … +60
Protection class IP 24 (installed)
2.5 kA (10/350 µs)
8 kA (8/20 µs) according to IEC 61000-4-5
Housing material Profile: Aluminum anodized; cover: Aluminum die cast coated
Weight g 350
lb 0.77
(H x W x D) inches 9.6 x 3.6 x 4
Dimensions mm 142 x 71 x 51
(H x W x D) inches 5.6 x 2.8 x 2
Please note:
If the Primary which controls the FlexRET system does not support the default ex-factory interface set-
ting, then the FlexRET must be switched to the appropriate standard of the Primary before installation.
Please contact Kathrein for further information.
If the FlexRET of an antenna has to be replaced, the FlexRET gets the information stored in the antenna
after power on automatically. It is not necessary to configure the FlexRET manually.
EN 55022 (Emission)
EN 55024 (Immunity)
EU-RED: Hereby, KATHREIN SE declares that the radio equipment type 86010153V01 is in com-
pliance w+ith Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address: http://www.kathrein.com
Scope of supply: FlexRET
Optional: Site Sharing Adapter (86010154 or 86010155) to create independent logical
interfaces at one antenna or site. Makes it possible to operate with more than one
independent Node B.
Gender Adapter (86010162) to convert the AISG out (female) to an AISG in (male)
port in order to operate one FlexRet with exactly 2 BTS.
Detailed information is given in the data sheet of the Gender Adapter.
RET
Port Extender (86010163) to convert the existing AISG input and output in order to
operate FlexRet with exactly 2 BTS while maintaining the daisy chain capability.
ped
equip
Detailed information is given in the data sheet of the Port Extender.
a s a re
ntenn
Please note:
e.
In general, the addressing of the FlexRET is automatically performed.
F l e xRET a his modul eed
Only in case the FlexRET is m
anually addressed, the serial number has All wit h t n tn
o
to be extended by the corresponding colour coding extension
d u l e does rately.
o a
(e.g. CSG351234-R1). The respective information can be found on the The m rdered sep
site documentation which is included in the scope of supply. b e
o
to
241
Antenna Line Configurator (ALC)
For Antenna Line Devices (ALD)
Antenna Line Configurator

Type No. 86010156
Connector* to RCU/TMA 1 x 8-pin connector according to IEC 60130-9, female,
conforming to AISG RF-connector (SMB male)
Input voltage of ALC 20 – 30 V DC
Display Touchscreen, sunlight visible
Tiltsensor Measuring range ±80°, accuracy ±1°
Output voltage to RCU’s/TMA’s AISG female pin 6 (24 V DC): 20–30 V DC
AISG female pin 1 (12 V DC): 10–15 V DC
RF male (at 24 V DC): 10–30 V DC **
RF male (at 12 V DC): 10–15 V DC **
Output power AISG female pin 6 (24 V DC)
(power supply to RCU’s/TMA’s) without load on pin 1 (12 V DC) and on RF-plug: ≤ 15 W
AISG female Pin 1 (12 V DC)
with max. 7.5 W load on pin 6 (24 V DC) and/or on RF plug: ≤ 7.5 W
Current monitoring Per branch (12 V, 24 V, RF): 10–1500 mA
measurement level
Over-current protection Per branch (12 V, 24 V, RF): < 1500 mA
Interface to RCU/TMA RS 485 / power supply / RF connector (SMB male)
Protocol to RCU/TMA HDLC hex-coded command set, conforming to AISG 1.1 and 3GPP / AISG 2.0
Interface W-LAN (802.11n), USB (1.1 / 2.0)
Max. number of RCU’s/TMA’s 9/1 pcs., depending on system configuration and length of control cable
Max. length of control cable 200 m / 9 RCU’s (in daisy chain configuration)
150 m / 6 RCU’s (in splitter configuration)
Internal memory 380 MB
Weight 1 kg
Temperature range (operating) −20 ... +45 °C ambient temperature
Temperature range (charging) 0 ... +30 °C ambient temperature
Dimensions (H x W x D) 265 x 102 x 37 mm
Packing size 400 x 280 x 85 mm
Power supply LiPo-battery (14.8 V, > 2000 mAh)
* T ightening torque for fixing the connector must be 0.5–1.0 Nm (‘hand-tightened’).
The connector should be tightened by hand only!
** Switchable with software
Certificate: CE
FCC part 15 class B
UL (for external power adapter)
Standards: EN 60950-22
EN 55022
EN 55024
Scope of supply: ALC
Charging device (can also be used as external power supply)
USB cable
RET cable
HF cable (SMB / 7-16)
Quick Guide
Transport case
242
Antenna Line Configurator (ALC) from
Available n
For Antenna Line Devices (ALD) May 2 0 19 o
Preliminary Issue
• Supports AISG 2 / AISG 3 • High-resolution display
• HDLC-logging feature • New Browser-interface
Antenna Line Configurator

Type No. 86010158
Connector* to RCU/TMA 1 x 8-pin connector according to IEC 60130-9, female,
Input voltage of ALC 20 – 30 V DC
Display High-resolution display, sunlight visible
Tiltsensor Measuring range ±80°, accuracy ±1°
Output voltage AISG female pin 6: 24 ± 1 V DC
to RCU’s/TMA’s RF-plug: 24 ± 1 V DC
Output power RF-plug + AISG female pin 6 ≤ 15 W
(power supply to RCU’s/TMA’s)
Current monitoring AISG female pin 6, RF-plug: 10 – 1500 mA
measurement level
Over-current protection AISG female pin 6, RF-plug: < 1500 mA
Protocol to RCU/TMA HDLC hex-coded command set, conforming to 3GPP / AISG 2 and AISG 3
Interface W-LAN (802.11g), USB 2.0
Max. length of control cable 200 m / 9 RCU’s (in daisy chain configuration)
150 m / 6 RCU’s (in splitter configuration)
Internal memory 512 MB
Weight 1 kg
Temperature range (operating) −20 ... +45 °C ambient temperature
Temperature range (charging) 0 ... +30 °C ambient temperature
Dimensions (H x W x D) 265 x 102 x 37 mm
Power supply LiPo-battery (14.4 V, > 1850 mAh)
* Tightening torque for fixing the connector must be 0.5–1.0 Nm (‘hand-tightened’).
Certificate: CE
FCC
EN 62368-1
EN 62479
EN 50581
ETSI EN 301489-1
ETSI EN 301489-17
ETSI EN 300328 2.1.1
Scope of supply: ALC
Charging device (can also be used as external power supply)
USB cable
RET cable
HF cable (SMB / 7-16)
Quick Guide
Transport case
Screen cover
RET
243
Portable Control Adapter (PCA)
For Antenna Line Devices (ALD)
Portable Control Adapter

Type No. 86010046
Connector * to RCU/TMA 1 x 8-pin connector according to IEC 60130-9, female,
Input voltage of PCA V DC 24
Output voltage to V DC AISG female pin 6 (24 V DC): 24 ±10%
RCU’s/TMA’s AISG female pin 1 (12 V DC): 14 ±7%
RF male (at 24 V DC): 24 ±10% ***
RF male (at 12 V DC): 14 ±7% ***
Output power AISG female pin 6 (24 V DC)
(power supply to without load on pin 1 (12 V DC) and on RF-plug: ≤ 60
W
RCU’s/TMA’s) AISG female Pin 1 (12 V DC)
with max. 30 W load on pin 6 (24 V DC) and/or on RF plug: ≤ 30
Current monitoring mA Per branch (12 V, 24 V, RF): 10 – 2500
measurement level
Over-current protection Per branch (12 V, 24 V, RF): < 2500
Protocol to RCU/TMA HDLC hex-coded command set, conforming to AISG 1.1 and 3GPP / AISG 2.0
Interface to PC USB 1.1/2.0
Max. length of 9 RCU’s (in daisy chain configuration): 200 | 656.17
m | ft
control cable 6 RCU’s (in splitter configuration): 150 | 492.13
Weight g | lb 535 | 1.2 (incl. external power adapter)
Temperature range °C 0 ... +55 ambient temperature
Height x width x mm 40 x 95 x 160
depth inches 1.57 x 3.74 x 6.29
External power supply ** Input: 90 – 264 V AC, 47 – 63 Hz
24 V DC / 3.0 A
* Tightening torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’).
** If powered via AISG-interface, no external power supply is required.
*** Switchable with software
Certificate: CE
FCC part 15 class B
EN 55022
EN 55024
System requirements Windows XP, Win7, Win8, Win10
for PCA Software:
Scope of supply: PCA
External power supply (24 V DC / 70 W)
USB cable
AC power cable
Installation guide
Please note: The latest PCA application software, the device driver
and PCA manual can be downloaded from the service
portal under www.kathrein.com
244
Connecting Cable
For Remote Electrical Tilt (RET) System
For indoor and outdoor use
RET Cable for power supply and control

Type No. 86010007 ...
Connectors 2 x 8 pin connector
according IEC 60130-9, female/male
Tightening torque for fixing 1.0 – 1.5 Nm
the connectors (The connector should be tightened by
hand or by special torque screwdriver)
Construction Screen
1x twisted pair 100 Ω/1 MHz
2x power supply, 1x ground
AWM style 20317 I/II A/B + 20549 + 20233
Rated current 4 A (power supply)
(at 50 °C air temperature)
Temperature range −40 °C to +80 °C, (fixed position)
Protection class IP 67 (connected)
Cable diameter 8 mm
Flammability VL 1581 VW-1
CSA FT 1
Colour Black, similar to RAL 9005
Minimum bending radius: One time 60 mm,
several times 120 mm.
The male and female connectors of all Kathrein RET products are compatible
components which are designed to operate under the environmental
conditions as described in ETS 300 019-1-4 class 4.1 E.
Control Cable Female Male

Length Type No.
0.5 m 86010054
7 8 6 6 8 7
1m 86010007
3 1 1 3
2m 86010008
3m 86010029 5 4 4 5
5m 86010009 2 2
10 m 86010010
20 m 86010032
25 m 86010011 PIN assignment according AISG:
40 m 86010012 1 +13 V DC (+12 V DC nominal)
2 not connected
50 m 86010033
3 RS485 B
60 m 86010013 4 not connected
80 m 86010014 5 RS485 A
100 m 86010015 6 +29 V DC (+24 V DC nominal)
7 DC Return
8 not connected
✘ ✔
Optional:
Torque screwdriver for AISG connecting cable
(order no. 85010080).
With the torque screwdriver, Kathrein connec-
RET
ting cables can be easily fixed with the recom-

mended torque of 1 Nm.
Old style connector: New style connector:

Torque screwdriver not Torque screwdriver usable
usable
245
3-way
Operate a FlexRET system with up to three independent primaries.
• Compliant to AISG 1.1 and 3GPP/AISG 2.0 • Selectable arrangement of arrays

• Single RETs or Multi RET displayed • Possible for up to three FlexRETs (daisy chain)
Type No. 86010154

Connectors 4 x 8 pin connector according to IEC 60130-9; according to AISG
In: male; Out: female
Temperature range °C −40 … +60
2.5 kA (10/350 ms)
8 kA (8/20 ms)
Max. cable length (Site
m 150
Sharing Adapter to last
ft 492
FlexRET Antenna)
Housing material Cover: Aluminum die cast coated
Weight g | lb 650 | 1.4 lb
inches 6.3 x 9.8 x 3.9 inches
(H x W x D) inches 4.8 x 6.5 x 2.4
Please note:
The Site Sharing Adapter can exclusively be used with FlexRET antennas. The FlexRET output of the Site
Sharing Adapter needs to be directly connected to the FlexRET antenna. For selecting the arrangement
of the antenna arrays, a seperate software application is available.
The Site Sharing Adapter expands the AISG interface of max. three FlexRETs up to three AISG interfaces
for three independent AISG primaries. The allignment of antenna arrays can be configured individually.
Only FlexRET devices from firmware version FW_V02.01.00 are suitable for operation with the Site S haring
Adapter.
– The firmware version can be queried through the AISG command “get information”.
– The latest firmware version for FlexRET can be downloaded from the Kathrein website.
– FlexRET Antennas with firmware version FW_V02.00.XX must be updated before the initial setup of
the Site Sharing Adapter. The FlexRET device will not be detected otherwise.
– A firmware update can be performed with a corresponding primary (e.g. Node B) or Controller
(e.g. Kathrein ALC, -PCA, -CCU).
Standby power for Site Sharing Adapter and FlexRET system is taken by the BTS with the highest DC
input voltage. When the motor is in operation, the electrical power is allocated fairly to the base stations,
according to the individual input. The Site Sharing Adapter can not be used in combination with an AISG
splitter (e.g. 86010002). For the connection of the Site Sharing Adapter and the FlexRETs, a standard ASIG
cable shall be used.
The latest configuration software and the manual with detailed configuration information are provided via
our customer portal on www.kathrein.com
Additional earthing may be needed depending on the used installation. Please follow the guidelines
given in the manual.
Standards: EN 60950-1 (Safety),
EN 55022 (Emission),
EN 55024 (Immunity),
ETS 300019-1-4 (Environmental), FlexRET FlexRET FlexRET
Scope of supply: Site Sharing Adapter, tension band
BTS-A BTS-B BTS-C
246
6-way
Operate a FlexRET system with up to six independent primaries.
• Compliant to AISG 1.1 and 3GPP/AISG 2.0 • Selectable arrangement of arrays

• Single RETs or Multi RET displayed • Possible for up to three FlexRETs (daisy chain)
Type No. 86010155

Connectors 7 x 8 pin connector according to IEC 60130-9; according to AISG
In: male; Out: female
Temperature range °C | °F −40 … +60 | −40 … +140
2.5 kA (10/350 µs)
8 kA (8/20 µs)
Max. cable length (Site
m 150
Sharing Adapter to last
ft 492
FlexRET Antenna)
Housing material Cover: Aluminum die cast coated
Weight g | lb 1350 | 3.0 lb
inches 7.68 x 14.17 x 4.33
(H x W x D) inches 6.14 x 10.43 x 2.56
Please note:
The Site Sharing Adapter can exclusively be used with FlexRET antennas. The FlexRET output of the Site
Sharing Adapter needs to be directly connected to the FlexRET antenna. For selecting the arrangement
of the antenna arrays, a seperate software application is available.
The Site Sharing Adapter expands the AISG interface of max. three FlexRETs up to three AISG interfaces
for six independent AISG primaries. The allignment of antenna arrays can be configured individually.
Only FlexRET devices from firmware version FW_V02.01.00 are suitable for operation with the Site S haring
Adapter.
– The firmware version can be queried through the AISG command “get information”.
– The latest firmware version for FlexRET can be downloaded from the Kathrein website.
– FlexRET Antennas with firmware version FW_V02.00.XX must be updated before the initial setup of
the Site Sharing Adapter. The FlexRET device will not be detected otherwise.
– A firmware update can be performed with a corresponding primary (e.g. Node B) or Controller
(e.g. Kathrein ALC, -PCA, -CCU).
When the motor is in operation, the electrical power is allocated fairly to the base stations, according
to the individual input. The Site Sharing Adapter can not be used in combination with an AISG splitter
(e.g. 86010002). For the connection of the Site Sharing Adapter and the FlexRETs, a standard ASIG cable
shall be used.
The latest configuration software and the manual with detailed configuration information are provided via
our customer portal on www.kathrein.com
Additional earthing may be needed depending on the used installation. Please follow the guidelines
given in the manual.
Standards: EN 60950-1 (Safety),
EN 55022 (Emission),
ETS 300019-1-4 (Environmental),
UL 60950-1; 1st edition FlexRET FlexRET FlexRET
RET

Scope of supply: Site Sharing Adapter, tension band
BTS1 BTS2 BTS3 BTS4 BTS5 BTS6
247
Gender Adapter for FlexRET
Converts the AISG out (female) to an AISG in (male) port in order to operate the FlexRET with
two BTS.
Only for FlexRET 86010153V01.
Type No. 86010162

Connectors 1 x 8 pin connector (male) according to IEC 60130-9;
according to AISG C485
1 x 8 pin connector (female) according to IEC 60130-9;
according to AISG C485
Female mates with FlexRET
Surge current capability AISG interface (each pin) in combination with FlexRET
2.5 kA (10/350 µs)
Housing material Connector shell: Zinc die cast Ni plated;
Contacts: Ag plated
Weight g 45
lb 0.099
(H x W x D) inches 1.7 x 0.78 x 0.78
(H x W x D) inches 1.7 x 0.78 x 0.78

Certification: CE
Scope of supply: Gender Adapter
Notice: The Gender Adapter is solely to be used in combination with the
FlexRET module 86010153V01. A combination with other modules, Antenna
especially with the FlexRET module 86010153, must be avoided
since this could lead to unexpected behaviour in the FlexRET
module and could cause overvoltage in the primary power
supply.
For avoidance of doubt, the combination with any other module, Flex
with exception of the FlexRET module 86010153V01, could lead RET
to a d
amage. In no event will Kathrein, its affiliates and/or sub- Gender Adapter
sidiaries be liable for direct, incidental, consequential, special, (converts “AISG out”
indirect damages arising from or relating to the combination to “AISG in”)
with another module except FlexRET module 86010153V01. These

limitations will apply even if Kathrein has been advised of the
possibility of such damages and whether such damages are
forseeable or not.
BTS 1 BTS 2
+ + AISG out AISG out
86010153 + 86010162 86010153V01 + 86010162
In combination with 86010153: In combination with 86010153V01:

Gender Adapter is not usable. Gender Adapter can be used.
248
Port Extender for FlexRET
Port Extender allows daisy chaining of FlexRET 86010153V01 when the FlexRET operates with two
BTS. G-in and G-out is converting the AISG-out (female) of FlexRET to an AISG-in while maintai-
ning the daisy chain capability on this port.
Only for FlexRET 86010153V01.
Type No. 86010163

Connectors 4 x 8 pin connector according to IEC 60130-9; according to AISG C485
Daisy chain G-in: male; Daisy chain G-out: female
Surge current capability AISG interface (each pin) in combination with FlexRET
2.5 kA (10/350 µs)
Weight g 160
lb 0.35
(H x W x D) inches 3.5 x 2.8 x 2.8
Dimensions mm 44.5 x 81 x 62
(H x W x D) inches 1.8 x 3.2 x 2.4

Certification: CE
Scope of supply: Port Extender
Notice:
The Port Extender is solely to be used in combination
with the FlexRET module 86010153V01. A combination
with other modules, especially with the FlexRET module Antenna Antenna Antenna
86010153, must be avoided since this could lead to un
expected behaviour in the FlexRET module and could
cause overvoltage in the primary power supply.
For avoidance of doubt, the combination with any
other m odule, with e xception of the FlexRET module Flex Flex Flex
86010153V01, could lead to a d amage. In no event will RET RET RET
Kathrein, its affiliates and/or subsidiaries be liable Gender Adapter

for direct, incidental, consequential, special, indirect Port Extender Port Extender
damages arising from or relating to the combination

with another module except FlexRET module
86010153V01. These limitations will apply even if Kathrein
has been a dvised of the p ossibility of such damages
and whether such damages are forseeable or not.
BTS 1 BTS 2
AISG out AISG out
RET
+ +
86010153 + 86010163 86010153V01 + 86010163
In combination with 86010153: In combination with 86010153V01:

Port Extender is not usable. Port Extender can be used.
249
DC-Power and Signal Splitter
For Remote Electrical Tilt (RET)
Indoor and Outdoor Use
AISG compliant device for splitting of DC-power and control
signals from one input to three outputs.
3-way Splitter for RET

Type No. 86010002
Connectors 1)
4 x 8 pin connector
according IEC 60130-9, 1 x male, 3 x female
Rated current (power supply) 3 A (at 50 °C)
Max. voltage 60 V
Weight 250 g
Packing size 114 mm x 117 mm x 117 mm
Height/width/depth 91 mm / 103 mm / 72 mm
1)
he tightning torque for fixing the connector must be 1.0–1.5 Nm (‘hand-
T
tightened’).
Material: Connector plate: Aluminum.
Cap: Plastic.
Mounting: Mast mounting (50–145 mm diameter) by clamp.
Wall mounting by screws (not supplied).
Note: Connectors must be situated at the bottom.
No inverted mounting possible.
Scope of supply: 3-way Splitter
Clamp (50...145 mm)
2 pins
(power supply, max. 3 A)
6 pins
(max. 0.1 A)
Input Output 1 Output 2 Output 3
250
Lightning Protection Device (LPD)
For Remote Electrical Tilt (RET)
Indoor and Outdoor Use
The device is designed for lightning protection of control cables
carrying partial lightning currents up to 25 kA (shield) and
2.5 kA (inner conductor), according IEC 61643-1, IEC 61312-3.
Each pin is protected individually.
Lightning Protection Device for RET

Type No. 86010030
Connectors1) 2 x 8 pin connector
according IEC 60130-9,
input: male, output: female
SPD-Type 8 x bipolar gas tube
Max. impuls current 25 kA (housing, shield) (10/350 µs)
inner conductors: 2.5 kA/pin (10/350 µs)
Max. dynamic overvoltage < 700 V
at spark gap (1 kV/µs)
Static overvoltage (100 V/s) < 100 V
Grounding Via mounting plate / clamps at metallic surfaces
or via separate cable,
min. cross-section 5 mm2 Cu (screw M6)
Max. operation current 4 A at 50 °C
Max. operation voltage 60 V
Weight 250 g
Packing size 114 mm x 117 mm x 117 mm
Height/width/depth 91 mm / 103 mm / 72 mm
1)
he tightning torque for fixing the connector must be 1.0–1.5 Nm (‘hand-
T
tightened’).
Material: Connector plate: Aluminum.
Cap: Plastic.
Mounting: Mast mounting (50–145 mm diameter) by clamp.
Wall mounting by screws (not supplied).
Note: No decoupling elements are integrated. The
coordination with additional LPD’s (device
input) should be checked according to IEC
61312.
Grounding of the device via the mounting
plate at metallic surfaces or via additional
grounding cable (not included in the delivery
extend).
Connectors must be situated at the bottom.
No inverted mounting possible.
Important: A control cable with a minimum
length of 2 meters is required between
Lightning Protection Device and Central
Control Unit at the BTS to achieve the
required decoupling.
Scope of supply: Lightning Protection Device
Clamp (50...145 mm)
RET
251
Earthing Clamp
For Power Supply and Control Cable
For Remote Control Unit (RCU)
The clamp is designed for lightning protection of control cables
according to EN 50164-1
Earthing clamp for RCU power supply and signal cable

Type No. 86010031
Max. lightning current 20 kA (pulse 10/350 µsec)
Contact resistance < 3 mΩ
Grounding Via stranded grounding wire,
16 mm2, length 0.5 m,
one end terminated with cable eye (10 mm lug)
Packing size Plastic bag: 210 mm x 210 mm
Weight 160 g
Material: Body: Stainless steel with vulcanized Ethylene-

Propylene-Caoutchouc
Screw: Stainless steel
Skin: Copper alloy
Grounding wire: Copper
Note: The earthing clamp is suitable only for the
Kathrein Power Supply and Signal Cables,
Type No. 86010007 to 86010015, 86010029,
86010032, 86010033, 86010054 to 86010060 or
shielded cables with
– shield diameter 6.1 mm
– jacket diameter 7.8 mm ±0.3 mm
The kit contains: 1 x Grounding kit body incl. Butyl sealing rope
covered with paper
1 x Screw M6 DIN 912
1 x Grounding wire
Mounting instructions:
This instruction is written for qualified and experienced personnel. Please
read it carefully before starting work. Any liability or responsibility for the result
of improper or unsafe installation is disclaimed!
Attention! Remove covering paper from Butyl sealing. Tighten the screw (> 6 Nm)
Install grounding kit only where the cable Wrap the grounding kit body around the
runs straight. cable and align it.
Fig. 1a Preassembled grounding kit.
Fig. 1b Clean the plastic jacket at the
desired grounding point and cut out a strip
of 15 mm with aid of a suitable stripping
tool.
252
Summary – Electrical Accessories
380...3800 MHz
Type Type No. Frequency Remark Max. Connector Page

range power female
Splitters
2-way Splitter 380–3800 86010131 380–3800 MHz Indoor/Outdoor 700 W 7-16 254
Tappers
2-way Tapper 694–2700 7.0/1.0 dB 86010150 694–2700 MHz Indoor/Outdoor 500 W 7-16 256
Electr. Acc.
253
Low-loss Power Splitters 380–3800
Multi-band
For indoor and outdoor use.
2-way Splitter 380–3800

Type No. 86010131
Connector 7-16 female
Max. power (at 50 °C 700 W
ambient temperature)
For connecting ... antennas 2
Frequency range 380 – 3800 MHz
VSWR < 1.5
Intermodulation IM3 < −150 dBc (2 x 43 dBm carrier)
Impedance 50 Ω
Insertion loss < 0.05 dB
Weight 870 g
Material: Brass. Surface treatment: CuSnZn3
Mounting: Bracket for wall mounting included in the scope

of supply.
(order separately).
DC capability: DC transmission between all terminations

(suitable for remote power supply systems).
Environmental conditions: ETS 300 019-1-4 class 4.1 E

– Low temperature: –55 °C
IP 65
34 14.5 15
SW 24
7
input
61
35
260
36 11 SW 24
input
54
13.5 263.5
Clamps (order separately)

Type Description Remarks
736801 1 clamp Mast: 34–60 mm diameter

736805 1 clamp Mast: 120–140 mm diameter 736805
254
Low-loss Power Splitters 694–3800
Multi-band

Type No. 86010101 86010103 86010105
Connector (female) 7-16 7-16 7-16
Max. power (at 50 °C 700 W 700 W 700 W
ambient temperature)
For connecting ... antennas 2 3 4
VSWR 694 – 894 MHz: < 1.32
790 – 3800 MHz: < 1.15
Intermodulation IM3 < −150 dBc (2 x 43 dBm carrier)
Impedance 50 Ω
Weight 870 g 900 g 960 g
Material: Brass. Surface treatment: CuSnZn3
Mounting: Bracket for wall mounting included in the

scope of supply.
For pipe mast mounting use clamps listed
below (order separately).
DC capability: DC transmission between all terminations

(suitable for remote power supply systems).
Environmental conditions: ETS 300 019-1-4 class 4.1 E

– Low temperature: –55 °C
IP 65
86010105
34 26 15
SW 24
7
input
61
35
64.5 260
36 25
86010104
SW 24
86010105
input
54
63 263.5

Type Description Remarks

Electr. Acc.

736805 1 clamp Mast: 120–140 mm diameter 736805
255
Low-loss Power Tappers 694–2700
Multi-band
2-way Tapper 694–2700 7.0 /1.0dB

2-way Tapper 694–2700 10.5/0.5dB
2-way Tapper 694–2700 15.3/0.3dB
P1
Type No. 86010150 86010151 86010152
Tap Loss
Input ↔ P1 −1.0 dB −0.5 dB −0.3 dB
Input ↔ P2 −7.0 dB −10.5 dB −15.3 dB
For connecting ... antennas 2
Impedance 50 Ω P2
VSWR 694 – 2700 MHz: < 1.5
Intermodulation IM3 < −150 dBc ( 2 x 43 dBm carrier)
Max. power per input 500 W (at 50 °C ambient temperature)
Connector 7-16 female
Weight Approx. 1.3 kg
Max. size 244 / 90 / 55 mm
Material: Housing: Aluminum.

Inner conductor: Brass.
DC capability: DC transmission only between input and port P1.
P2 is coupled capacitively.
Mounting: Bracked for wall mounting included in the scope
of supply.
(order separately).
Environmental conditions: IP 65 Input

Type No. Description Remarks
734360 1 tension band Mast: 34–60 mm diameter

734364
256
Summary – Mechanical Accessories
Clamps, Downtilt Kits ...
Page
Mounting Configurations 258
Product Line of Mounting Parts 259
Clamps “L”, “M” and “H” 260
Clamps “XM” and “XH” 261 – 265
Downtilt kit “L” 266
Downtilt kit “L” and “M” 267
Downtilt kit “H” 268
Downtilt kit “XM” and “XH” 269 + 270
Azimuth Adjustment Kits “L”, “M” and “H” 271
Azimuth Adjustment Kit “XH” 272
3 Sector Clamps “L”, “M” and “H” 273
3 Sector Clamp “XH” 274
Offset “L”, “M”, “H” and “XH” 275
2x Panel Mounting Kit “L”, “M” and “H” 276 – 278
2x Panel Mounting Kit “XH” 279
Tension Band 280
Canister Pole Mounting Kits 281
Side-mounting Clamp Omnis 282
Antenna Monitoring Unit AMU 283
GPS Azimuth Adjustment Tool 284 + 285
Protection Caps 286
The hereinafter referred to “wind load category L - M - H - XM - XH” correspond

to the defined “category of mounting hardware” given in the respective data sheets.
Mounting
257
Mounting Configurations
Clamp Offset
Large Pipe Diameter (“L”, “M”, “H”)
(“L”, “M”, “H”)
Clamp
Large Pipe Diameter
(“XH”, “XM”)
Standard Downtilt Standard Downtilt

(“L”, “M”, “H”) (“XH”, “XM”)
Azimuth Azimuth
(“L”, “M”, “H”) (“XH”)
258
Product Line
of Mounting Parts
Windload
Type Pole Diameter in mm Type No. Remark Page
Classification
Clamp light / medium ∅ 28–60 731651
∅ 42–115 738546
light / medium / heavy ∅ 55–115 85010212 260
∅ 110–220 85010002
∅ 210–380 85010003
Clamp XM (X-medium) ∅ 55–115 85010111 262
XH (X-heavy) ∅ 55–115 85010096 263
XH (X-heavy) ∅ 110–220 85010097 264
XH (X-heavy) ∅ 210–380 85010101 265
Downtilt kit
light 732327 266
light / medium 737978 267
heavy 85010008 268

Downtilt kit
XM (X-medium) 85010110 269
XH (X-heavy) 85010099 270
Azimuth Adjustment Kit

light / medium 85010014 Pole mounting
adjustment angle ±30°
271
(additional clamp
heavy 85010015 needed)

light / medium 85010016
Wall mounting
271
adjustment angle ±30°
heavy 85010017
X-heavy 85010098 272
3 Sector Clamp ∅ 88.9 742263

∅ 88.9 742317
light / medium
∅ 114.3 742033
3 sector clamp 273
∅ 139.7 742034
∅ 114.3 85010058
F
heavy
∅ 139.7 85010059
G
X-heavy ∅ 114.3 85010102 274

Offset light / medium 85010060
Mounting support clamp
Clearance between
pole and antenna
heavy 85010061 275
(additional clamp
X-heavy 85010104 needed)
2x Panel Mounting Kit max. Panel width 160 742113 276
light / medium
85010075 Additional clamp
max. Panel width 325 277
85010076 needed
heavy
max. Panel width 377 85010087 278
∅ 110–220 max. Panel 85010103
X-heavy 279
∅ 210–380 width 378 85010108
Tension Band ∅ 34–60 734360
∅ 60–80 734361
∅ 80–100 734362 Please note:
light Only usable 280
∅ 100–120 734363 without downtilt kit
∅ 120–140 734364
∅ 45–125 734365
Mounting

259
Mounting Hardware
Clamps
(Wind Load Category “L”, “M” and “H”)
Clamps
Type No. 731651 738546 85010212 85010002 85010003
Suitable for mast diameter 28–60 mm 42–115 mm 55–115 mm 110–220 mm 210–380 mm
Antenna – mast distance F 25–28 mm 20–26 mm 30–34 mm 47–55 mm 48–68 mm
Number of pieces 1 clamp 1 clamp 1 clamp 1 clamp 1 clamp
Material – Clamp Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel
– Screws Hot-dip galvanized steel/ Hot-dip galvanized steel/ Hot-dip galvanized steel/ Hot-dip galvanized steel/ Stainless steel/
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
– Nuts Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Weight 0.8 kg 1.1 kg 1.6 kg 2.7 kg 4.8 kg
A
E
I Nuts MA = G
C
F
B
∅D
Nuts M8 => MA = 12 Nm
K
H
Figure similar to 85010002
Type No. A B C D E F G H I K
731651 116 mm 40 mm 40 mm 28–60 mm 93 mm 25–28 mm 20 Nm 84 mm – 64 mm

738546 152 mm 40 mm 40 mm 42–115 mm 93 mm 20–26 mm 25 Nm 125 mm 72 mm 64 mm
85010212 174 mm 50 mm 50 mm 55–115 mm 104 mm 30–34 mm 35 Nm 126 mm 72 mm –
Please note: K
athrein does not recommend to use counter nuts.
The additional nuts supplied are only meant as spares.
260
Category of Mounting Hardware
will change during 2019
The “Category of Mounting Hardware” will change from “XH” to “XM” during 2019.
On the respective catalogue page you will also find a note.
Configuration examples:
Type Page
XH XM
80010888 32
XM XM
80010889 33
80010901 34 + 35
80011867 114 + 115 XH XH
80011868 116 + 117

80010964 123 – 125
80010965 126 – 128
80011965 153 – 155
80011898 171 – 173
80010991 180 – 183
80011877 190 +191
80011878 192 + 193
Possible3) Not allowed
Possible combinations of mounting hardware “XM” and “XH”

85010111 85010096 85010110 85010099 85010102 85010104 85010098 85010103
Clamp 55–115 Clamp 55–115 Downtilt Kit Downtilt Kit 3-Sector Clamp Offset Azimuth Adjust 85010108
“XM” “XH” “XM” “XH” Kit “XH” “XH” ment “XH” 2x Panel Moun-
ting Kit “XH”
85010111
Clamp 55–115 “XM” ― ― ✔ ✘ ― ✘ ✘ ―
85010096
Clamp 55–115 “XH” ― ― ✔ ✔ ― ✔ ✔ ―
85010110
Downtilt Kit “XM” ✔ ✔ ― ― ✔ 2) ✘ ✘ ✔
85010099
Downtilt Kit “XH” ✘ ✔ ― ― ✔ 2) ✘ ✘ ✔
85010102
3-Sector Clamp Kit “XH” ― ― ✔ 2) ✔ 2) ― ✔ 2) ✘ ✘
85010104
Offset “XH” ✘ ✔ ✘ ✘ ✔ 2) ― ✘ ✘
85010098
Azimuth Adjustment
“XH”
✘ ✔ ✘ ✘ ✘ ✘ ― ✘
85010103 | 85010108
2x Panel Mounting Kit
“XH”
― ― ✔ ✔ ✘ ✘ ✘ ―
“XM” Antenna 378 ✔ ✔ ✔ ✔ ✔ ✔ 3) ✔ 3) ✔ 3)
“XM” Antenna 508 ✔ ✔ ✔ ✔ ✔ 1) ✔ 3) ✔ 3) ✘
“XH” Antenna 378 ✘ ✔ ✘ ✔ ✔ ✔ ✔ ✔
“XH” Antenna 508 ✘ ✔ ✘ ✔ ✔ 1) ✔ ✔ ✘
✔ OK
✘ Not allowed
1) Only possible in combination with 3x Offset “XH”
2) The use of Downilt kit “XM” / “XH” in combination with Offset “XH” is strictly forbidden
Mounting
3) With Clamp “XH” / Accessories “XH” / Antenna “XM”
261
Mounting Hardware
Clamps
(Wind Load Category “XM”)
Clamps 55–115mm XM
Type No. 85010111
Suitable for mm 55 – 115
mast diameter inches 2.2 – 4.5
Scope of supply 2 x clamps
Material – Clamp Hot-dip galvanized steel
– Screws Hot-dip galvanized steel
– Nuts Stainless steel
Weight kg 4.5
lb 9.9
Torque
MA = 40 Nm
Torque
MA = 30 Nm
F
∅C
Attention!
D F Square of the screw must be
positioned in the square hole
A B before tightening the nut.
A B C D E F
mm 200 75 55 – 115 142 130 (25)

inches 7.9 2.9 2.2 – 4.5 5.6 5.1 (1)
Please note: K
262
Mounting Hardware
Clamp
(Wind Load Category “XH”)
Clamp
Type No. 85010096
Scope of supply 1 x lower clamp
1 x upper clamp
Weight kg 5.0
lb 11.0
F Torque
MA = 40 Nm
Torque
MA = 40 Nm
upper clamp
H
∅D
Torque
MA = 40 Nm
Torque
E G H MA = 40 Nm
A B C
lower clamp
lower clamp upper clamp
1)
Attention!
Square of the screw must be
before tightening the nut.
2)
All nuts have the same
wrench size 17.
A B C D E F G H
mm 200 69 89 55 – 115 150 130 (19) (39)

inches 7.9 2.7 3.5 2.2 – 4.5 5.9 5.1 (0.7) (1.5)
Please note: K
Mounting
263
Mounting Hardware
Clamp
Clamp
Type No. 85010097
1 x upper clamp
Weight kg 9.4
lb 20.7
F Torque
MA = 40 Nm
upper clamp
H
∅D
Torque
MA = 40 Nm
Torque
MA = 40 Nm
E G H
A B C
lower clamp
G
Torque 1)
MA = 40 Nm
Attention!
2)
wrench size 17.
A B C D E F G H
mm 300 69 89 110 – 220 150 242 (19) (39)

inches 11.8 2.7 3.5 4.3 – 8.7 5.9 9.5 (0.7) (1.5)
Please note: K
264
Mounting Hardware
Clamp
Clamp
Type No. 85010101
Scope of supply 1 x upper clamp
1 x lower clamp
Weight kg 14.6
lb 32.2
J Torque
MA = 40 Nm Torque
MA = 40 Nm
upper clamp
H
D
∅
Torque Torque
MA = 40 Nm MA = 40 Nm
lower clamp
G
F G H
1)
E B C
Attention!
A lower clamp upper clamp positioned in the square hole
2)
wrench size 17.
A B C D E F G H J
mm 442 79 99 210 – 380 200 150 19 39 392

inches 17.4 3.1 3.9 8.27 – 14.96 7.87 5.9 0.75 1.54 15.43
Please note: K
Mounting
265
Standard Downtilt kit
for Panel Antennas
(Wind Load Category “L”)
Downtilt kit
Type No. 732327

Preferred range of use – Panel antennas with attached mounting plates
– Downtilt kit without scale for universal use
Weight 1.3 kg
Material Hot-dip galvanized steel
Screws Hot-dip galvanized steel / stainless steel
Nuts / washers Stainless steel
20 Nm / M8
20 Nm / M8
64
20 Nm / M8 Ø 8.5
Before the adjustment, all joint

screws must be loosened.
230
After the adjustment has been
completed, all loosened screws
must be tightened.
Recommended torque for M8
bolted connections: 20 Nm.
Mounting accessories included.

64
45
Ø 8.5
115 60
20 Nm / M8
Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
Mounting this downtilt kit enlarges the spacing between mast and antenna by 42 mm.
Use the downtilt kit together with the clamps as described in the antenna datasheet.
266
for Panel Antennas
(Wind Load Category “L” and “M”)
Downtilt kit
Type No. 737978

Weight 2.3 kg
Nuts / washers Stainless steel
20 Nm / M8
20 Nm / M8
50 Nm / M12 64 70
Ø 8.5
Before the adjustment, all joint

screws must be loosened.
After the adjustment has been
completed, all loosened screws
336
must be tightened.
Mounting accessories included.
64
50
Ø 8.5
115 70
20 Nm / M8
Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
Mounting this downtilt kit enlarges the spacing between mast and antenna by 70 mm.
Use the downtilt kit together with the clamps as described in the antenna datasheet.
Mounting
267
for Panel Antennas
(Wind Load Category “H”)
Special downtilt kit for Panel antennas

with a higher wind load.
Downtilt kit
Type No. 85010008

Preferred range of use – Panel antennas with a higher wind load M10
M8
– Panel antennas with attached mounting plates Mounting
– Downtilt kit without scale for universal use accessories
Weight 4.3 kg included
Nuts Stainless steel
Recommended mast clamps:
Weight Units per

Type No. Description Mast diameter
approx. antenna
738546 1 clamp 42 – 115 mm 1.1 kg 2
85010002 1 clamp 110 – 220 mm 2.9 kg 2
85010003 1 clamp 210 – 380 mm 4.8 kg 2
Recommended torque for all bolted connections:
Screw size Torque
M8 20 Nm
M10 50 Nm
72 100
Ø 8.5
Maximum acceptable load:

Frontal wind load < 5000 N
65
Lateral wind load < 1300 N

305
72
Ø 8.5
Instructions to adjust the required downtilt angle are given in the

datasheet or on the rearside of the antenna.
Mounting this downtilt kit enlarges the spacing between mast and
antenna by 100 mm.
Use the downtilt kit together with the clamps as described in the 155 100
antenna datasheet.
268
for Panel Antennas
(Wind Load Category “XM”)

with wind load category “XM”.
Downtilt kit XM
Type No. 85010110
Weight kg 8.5
lb 18.7
Screws Hot-dip galvanized steel
Attention: The downtilt kit is not to be used together with azimuth kits or
offsets.

Mast diameter Weight Units per
mm | inches approx. kg | lb antenna
85010111 2 clamps 55 – 115 | 2.2 – 4.5 4.5 | 9.9 1
85010097 2 clamps 110 – 220 | 4.3 – 8.7 9.7 | 20.7 1
Recommended torque for bolted connections:

Screw size Torque
M10 Nm 50
M12 Nm 85
Downtilt kit Downtilt kit

used for used for
Instructions to adjust the required downtilt angle are given in the antenna downtilt uptilt
datasheet or on the rearside of the antenna.
Mounting this downtilt kit enlarges the spacing between mast and antenna by
a minimum of 59 mm | 2.3 inches. 1)
M10 2)
Use the downtilt kit together with the clamps as described in the antenna
M10
datasheet.
316 | 12.4
M12
278 | 10.9
314 | 12.4
2)
150 | 5.9
11 | 0.4
142 | 5.6
1) 104 | 4.1
2) 19 | 0.7
elongated hole:
142 | 5.6 15x11 | 0.6x0.4

Mounting
269
for Panel Antennas

with wind load category “XH”.
Downtilt kit
Type No. 85010099

Weight kg 10.6
lb 23.4
Screws Hot-dip galvanized steel
Attention: The downtilt kit is not to be used together with azimuth kit or
offset.

Weight
Mast diameter Units per
Type No. Description approx. kg
mm | inches antenna
| lb
85010096 2 clampes 55 – 115 | 2.2 – 4.5 5.0 | 11.0 1
85010097 2 clampes 110 – 220 | 4.3 – 8.7 9.7 | 20.7 1
Recommended torque for all bolted connections:
Screw size Torque M10 1)
M10 Nm 50
2)
M12 Nm 85
316 | 12.4
Maximum acceptable load:
Frontal wind load N | lbf < 6000 | 2348.9
Lateral wind load N | lbf < 1950 | 438.4
280 | 11.0
310 | 12.2
4)
Instructions to adjust the required downtilt angle are given in the datasheet
or on the rearside of the antenna.
3)
Mounting this downtilt kit enlarges the spacing between mast and antenna by
1)
Use the downtilt kit together with the clamps as described in the antenna
datasheet. 150 | 5.9
5) 1) 104 | 4.1
2) 37 | 1.5
3) 69 | 2.7
4) 17 | 0.7
5) ∅ 11 | 0.4
150 | 5.9
270
Mounting Hardware
Azimuth Adjustment Kits
Pole mounting Wall mounting
Detail
358
308±1
Distance B
see table
MA
62±0.5
109
46
104
50
86
∅ 15
43
14
±0.5
180±1 106
The azimuth adjustment kit for pole mounting can be mounted with all suitable clamps, 3-Sector clamps
and 2x Panel mounting kits (with the latter only as an interface between mounting kit and antenna).
Type No. 85010014 85010015 85010016 85010017
Suitable for pole mounting wall mounting
Number of pieces 2 brackets 2 brackets 2 brackets 2 brackets
Distance between screws [B] 64 mm 72 mm 64 mm 72 mm
Angular range ± 30° ± 30°
Weight / kit approx. 1260 g approx. 1260 g approx. 2500 g approx. 2500 g
Supplied mounting all screws Screws and dowels for wall fastening are
accessories not supplied, they must be chosen by installer
according to on-site requirements.
Materials Parts are hot-dip galvanized steel; Captive nuts are stainless steel
Max. permissible static
load / kit
– X direction 2150 N 5100 N 2150 N 5100 N
– Y direction 760 N 1350 N 760 N 1350 N
Recommended torque: Screws M6: 8 Nm; Screws M8: 20 Nm; MoS2 greased.
Minimum torque MA: 30 Nm; MoS2 greased
Mounting
271
Mounting Hardware
Azimuth Adjustment
Clamp
Type No. 85010098
1 x upper clamp
– Bolts Hot-dip galvanized steel
Weight kg 3.3
lb 7.3
Torque
MA = 40 Nm
upper clamp
(40)
E
1)
Torque
MA = 70 Nm
F (20) (40)
D B C
A Torque
MA = 40 Nm
lower clamp
(20)
1)
Attention!
Do not remove the self-locking nut.
For the azimuth adjustment range loosen only
the self-locking nut (one or two rotations) and
afterwards tighten it with a torque MA = 70 Nm.
A B C D E F
mm 200 37.5 54.5 150 110

±30°
inches 7.9 1.48 2.15 5.9 4.3
Please note:
Kathrein does not recommend to use counter nuts.
272
Mounting Hardware
3 Sector Clamp Kit
n Slim and unobstrusive design.
n Nearly cylindrical optical appearance with small outer diameter.
n
Suitable for all Panels with an antenna housing width less than 400 mm (Hmax).
E
M8
Torque
3 sector clamp MA = 25 Nm
°
60
F
A
G
C
Torque
MA = 7 Nm
Mounting support clamp
t
D ou
Type No. A B C D E F G Hmax Weight
742263 88.9 65 180 168 64 50 45 280 4 kg
742317 88.9 88 213 199 64 50 45 361 4 kg
742033 114.3 92 217 207 64 50 45 377 4 kg
742034 139.7 100 236 228 64 50 45 400 4 kg
ax
Hm
85010058 114.3 92 217 207 72 50 45 377 4 kg
85010059 139.7 100 236 228 72 50 45 400 4 kg
All dimensions in mm.
Dout is determined by mounted components. Bottom view without downtilt kit
3 Sector Clamp Kit (Antenna Wind load Category “L” and “M”)
Type No. 742263 742317 742033 742034
Angle between antennas 120° 120° 120° 120°
Suitable for mast diameter 88.9 mm 88.9 mm 114.3 mm 139.7 mm
Number of pieces 2 x 3 sector clamp 2 x 3 sector clamp 2 x 3 sector clamp 2 x 3 sector clamp
2 x mounting support clamp 2 x mounting support clamp 2 x mounting support clamp 2 x mounting support clamp
Material
– 3 sector clamp Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel
– Mounting support clamp Aluminum Aluminum Aluminum Aluminum
– Screws / threaded stud Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel
– Nuts Stainless steel Stainless steel Stainless steel Stainless steel
3 Sector Clamp Kit (Antenna Wind load Category “H”)

Type No. 85010058 85010059
Angle between antennas 120° 120°
Suitable for mast diameter 114.3 mm 139.7 mm
Number of pieces 2 x 3 sector clamp 2 x 3 sector clamp
2 x mounting support clamp 2 x mounting support clamp
Material
– 3 sector clamp Hot-dip galvanized steel Hot-dip galvanized steel
– Mounting support clamp Aluminum Aluminum
– Screws / threaded stud Hot-dip galvanized steel Hot-dip galvanized steel
– Nuts Stainless steel Stainless steel
Mounting
273
Mounting Hardware
3 Sector Clamp Kit
n Nearly cylindrical optical appearance with small outer diameter.
n Suitable for all Panels with an antenna housing width of 508 mm | 20.0 inches (Hmax).
3 Sector Clamp Kit (Antenna Wind load Category “XH”)

Type No. 85010102
Angle between antennas ° 120
Suitable for mm 114.3
mast diameter inches 4.5
Number of pieces 2 x 3 sector clamp
2 x mounting support clamp
Material
– 3 sector clamp Hot-dip galvanized steel
– Mounting support clamp Aluminum
– Screws / threaded stud Hot-dip galvanized steel Torque
– Nuts Stainless steel MA = 25 Nm
upper clamp kit

Weight kg | lb 14.5 | 31.9
B
C
150 | 5.9
.8
.1 |5
147 Torque
147.1 | 5.8
MA = 7 Nm
Mounting
°
60
support clamp
3 sector clamp
316.4 | 12.5
A
Torque
MA = 25 Nm
lower clamp kit

354.7 | 14.0 Torque
MA = 7 Nm
Mounting
support clamp
D
F
Dimensions mm inches
A ∅ 114.3 ∅ 4.5
E B 62 2.4
G C 45 1.8
D max. 508 max. 20.0
E ∅ 959 ∅ 37.8
F max. 378 max. 14.9
G ∅ 720.3 ∅ 28.4
Bottom view with offset Bottom view without offset All dimensions in mm | inches
Please note: Possible accessories

Antennas with an antenna housing width 508 mm | 20.0 inches 85010104 Offset
are only suitable in combination with offset 85010104 or downtilt 85010099 Downtilt kit
kit 85010099.
A simultaneous combination of downtilt kit and offset is not
permitted.
274
Mounting Hardware
Offset for Panel Antennas
(Wind Load Category “L”, “M”, “H” and “XH”)
Type No. 85010060 85010061
Wind load category “L” and “M” “H”
Quantity needed per antenna 2 x spacer
Material: – spacer Hot-dip galvanized steel
– nuts Stainless steel
Dimension “A” 64 mm 72 mm
Weight 0.65 kg
Scope of supply 1 x spacer, Fitting accessories
Recommended torque for M8 bolted connections: 20 Nm
Please use the offset in combination with clamps corresponding

to the pole diameter.
104
77
42
A 90
Type No. 85010104

Wind load category “XH”
Quantity needed per antenna 1x spacer kit
Material: – spacer Hot-dip galvanized steel
– nuts Hot-dip galvanized steel
Weight kg 2.88
lb 6.35
Scope of supply 2 x spacer, Fitting accessories
Please use the offset in combination with clamps corresponding to the pole diameter.
lower spacer upper spacer
238 | 9.4 238 | 9.4

134.5 | 5.3
134.5 | 5.3
90 | 3.5
90 | 3.5
150 | 5.9 150 | 5.9

Mounting
Panel Accessories
2 x Panel Mounting Kit
(Wind Load Category “L” and “M”)
Use this mounting kit only for Panels with
a maximum width of 160 mm.
Wind load category: L (Light) or M (Medium)
Type No. 742113

Contens 2 x brackets and mounting accessories
Material: – Clamp and screws Hot-dip galvanized steel
– Nuts and washers Stainless steel
90
72±0.3
10 64±0.3
tion: r
Atten sed fo
9
t be u
19
o
30°
n n
kit ca 4V01.
s m o unting na 8001064 se the
Thi ten se u
the an tenna, plea 075.
75
118
9
is a n 5010
For th unting kit 8
Ø
38
mo
64±0.3 64±0.3
82.5 82.5
270
Configuration without mechanical downtilt Configuration with mechanical downtilt
101 64±0.5
33
10±1 Ø9
75±1
9 –0.5
63
64±0.3
72±0.3
Use the 2 x Panel Mounting Kit For a three sector panel arrangement,
together with the following mounting accessories use the mounting kit type no. 742113
together with the three sector clamp
Weight Units per
Type No. Description Remarks
approx. antenna 742317, 742033 or 742034.
Three sector clamp 742263 does not
731651 1 clamp Mast: 28 – 60 mm diameter 0.8 kg 2
match.
85010060 1 offset in combination with the 1.3 kg 2
clamps
737978 1 downtilt kit Downtilt angle: 2.3 kg 1
depending on antenna height
If a downtilt kit is used, please choose the fitting one from the antenna
datasheet.
276

Use this mounting kit for Panels with
Type No. 85010075 85010076

Contents 2 x brackets and mounting accessories
Hole distance “A” 64 mm 72 mm
Windload category (Antenna) “L” and “M” “H”
442
18.5 330
5
threaded bolts M8
60
35 A 64 A
72
0
R5
0
22
R5
Mounting Accessories (order separately)

Clamps (only the listed clamps are allowed!)
Units per
Weight
Type No. Description Remarks moun-
approx.
ting kit
85010060 1 offset 1.3 kg 4
85010061 1 offset 1.3 kg 4
If a downtilt kit is used, please choose the fitting one from the antenna
datasheet.
Mounting
277
(Wind Load Category “H”)

Use this mounting kit for Panels with
Type No. 85010087

Contents 2 x brackets and mounting accessories
Hole distance 72 mm
Windload category (Antenna) “H”
517
18.5 405
5
∅9
58
threaded bolts M8
34 72 72 72
Mounting Accessories (order separately)

Clamps (only the listed clamps are allowed!)
Units per
Weight
Type No. Description Remarks mounting
approx.
kit
85010212 1 clamp Mast: 55–115 diameter 1.6 kg 2
85010002 1 clamp Mast: 110–220 mm diameter 2.7 kg 2
85010003 1 clamp Mast: 210–380 mm diameter 4.8 kg 2
85010008 Downtilt kit 4.3 kg 2
The downtilt kit can not be used in combination with any offset (85010060 and
85010061).
278

Use this mounting kit for Panels with Torque 1
a maximum width of 378 mm | 14.9 inches
Type No. 85010103 85010108 Torque 2

Contents 2 x clamps and mounting accessories
Weight kg 20.5 27.5
lb 45.2 60.6
Suitable for mast ∅ mm 110 – 220 210 – 380
inches 4.3 – 8.7 8.3 – 15.0
Torque MA 1 40 40
Nm
Torque MA 2 25 40
Windload category (Antenna) “XH” Torque 1
A A G
C
B
K
A
J
E
F H
Type A B C D E F G H I J K
mm 150 39 6 68 24 625 242 420 25 173 54
85010103 inches 5.91 1.54 0.24 2.68 0.84 24.61 9.53 16.54 0.98 6.81 2.13
mm 150 39 6 68 24 625 392 420 25 221 102
85010108 inches 5.91 1.54 0.24 2.68 0.84 24.61 14.43 16.54 0.98 8.7 4.02
Please note: K
Weight Units per

approx. kg | lb mounting kit
85010099 1 downtilt kit 10.6 | 23.4 2

Mounting
279
Mounting Hardware
Tension Band for Panel Antennas
(Wind Load Category “L”)
Type No. 734360 734361 734362 734363 734364 734365

Suitable for mast diameter 34–60 mm 60–80 mm 80 – 100 mm 100–120 mm 120–140 mm 45–125 mm
Material Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
Weight (approx.) 0.06 kg 0.07 kg 0.08 kg 0.09 kg 0.11 kg 0.08 kg
e:
l e a s e not wntilt kit!
P t do
l e w ithou
u sab
Only
280
Canister Pole Mounting Kits
Canister Pole Mounting Kits
Kathrein offers a series of pole mounting kits for Kathrein canister antennas. Mounting kits are
available to secure Kathrein antennas to the top of existing wood, metal, or concrete poles. These
mounts are engineered to support these 2ʼ tall, multi-band antennas in extreme environments.
Depending on the type of pole the antenna is being mounted to, the Kathrein pole mount kits
come in two different colours (brown or grey).
Kathrein Number Colour Pole Diameter Kathrein Number Colour Pole Diameter
84040600 Brown Standard 84040602 Brown Wide
84040601 Grey Standard 84040603 Grey Wide
Standard Pole Diameter is defined as 5.00ʺ to 8.37ʺ Wide Pole Diameter is defined as 5.25ʺ to 14.12ʺ
Standard Size Pole Wide Diameter Pole
All kits include the pole top mount brackets, cantenna sleeve, and cable concealment shroud.
Kathrein recommends using the standard pole top mount when possible due to the decreased
shroud and mount size. The smaller size provides for better aesthetics.
Mounting
281
Side-mounting Clamp
Omnidirectional Antennas
Large Pipe
Type No. 738908
For masts of 94–125 mm diameter
Antenna
Mast
b
a
282
Antenna Monitoring Unit
AMU
GPS/GLONASS based Antenna Monitoring Unit to monitor base station

antennas in the field.
•Compatible to all panel antennas •Compact size
•Easy to adapt onto an antenna •BTS time sync via GPS clock
•Hardware prepared for AISG 3.0
Antenna Monitoring Unit AMU
Type No. 86010129
Monitoring Unit
Receiver Type L1, C/A code
Channels 72 channel, GPS and GLONASS parallel tracking
Used Geodetic System WGS 84
Horizontal Accuracy m ± 10
Azimuth Accuracy* ° 1.7 (rms)
Tilt- Roll Accuracy* ° ±2
Altitude Accuracy* m ± 10
First start h 3 – 12
(after installation)
Connector 2 x 8 pin connector according to IEC 60130-9; according to AISG
C485; Daisy chain in: male; Daisy chain out: female
Hardware Interfaces RS 485 A/B (pin 5, pin 3); power supply (pin 6); DC return (pin 7);
Input Voltage Range V 10…30 DC (pin 6)
Power Consumption W <2
Protocols AISG 2.0
Protection Class IP 65
Environmantal °C −40 – +55
Temperature Range
Lightning Protection AISG interface (each pin)
2.5 kA (10/350 μs)
8 kA (8/20 μs)
BTS Time Sync
Frequency Range MHz 1572 – 1608 (GPS and GLONASS)
LNA Gain dB 27 ± 3
Noise Figure dB Typ. 3
Supply Voltage V 4 – 6 V DC
DC Current mA < 80
Non-destruction V −32 … +32 V DC
Supply Voltage
Lightning Protection kA 2.5 (10/350 μs)
8 (8/20 μs)
Connector SMA female
Housing Material ALU, ASA
Weight kg | lb 1.6 | 3.5
Packing Size mm 400 x 190 x 136
inches 15.7 x 7.5 x 5.4
Dimensions mm 65.8 x 355.7 x 143.2
(H x W x D) inches 2.6 x 14.0 x 5.6
Scope of Supply
AMU 1 pc.
Adapter Plate 1 pc.
*D
epends on multipath environment, number of satellites in view; satellite geometry, ionospheric a
ctivity
and use of SBAS.
Please note: Please follow the user manual for installation and operating details. The AMU
needs to be powered by a LPS (Limited Power Source, Class: PS2) according to
IEC/EN 62368-1.
Standards: IEC/EN 62368-1 (Safety),
EN 60950-22 (Safety – Equipment installed outdoor),
ETS 300019-1-4 class 4.1 and 4.2 H (Environmental).
EU-RED: Hereby, KATHREIN SE declares that the radio equipment type
86010129 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: http://www.kathrein.com
Mounting
283
GPS Azimuth Adjustment Tool
GPS based Azimuth Adjustment tool to azimuth base station antennas in the field.
•Compatible to all Panel Antennas •Compact size

•Easy to adapt onto an Antenna •No cabeling neccessary
Type No. 86010157

GPS Sensor Specification
Receiver Type L1, C/A code, with carrier Phase smoothing
Channels Two 12-channel, parallel tracking
SBAS Tracking 2-channel, parallel tracking
Used Geodetic System WGS 84
Update Rate 10 Hz (10 measurement values per sec.)
Horizontal Accuracy < 1.0 m 95% confidence (DGPS 1))
< 2.5 m 95% confidence
Heading Accuracy 2) ± 0.8° (rms)
Tilt Accuracy 3) ± 0.25°
Orthometric Hight Accuracy 4) ± 1 m (rms)
First start max. 12 min. (primary initalisation of almanac)
Cold Start < 60 s (no almanac or RTC)
Warm Start < 20 s typical (almanac or RTC)
Heading Fix < 10 s typical (valid position)
Interface W-LAN (802.11); RS 232 (optional)
Power Supply LiPo-Battery ( 14.8 V, 2200 mAh)
Input Voltage 18 – 28 VDC
Power Consumption 5 W nominal; 36 W charging mode
Operating Temperature −10 °C to +50 °C
Storage Temperature −10 °C to +60 °C
Charging Temperature 0 °C to +35 °C
Certifications FCC; CE
Dimensions (L x W x H) 580 (900 deployed) x 116 x 65 mm
Weight 3.1 kg
1)
epends on multipath environment, number of satellites in view; satellite geometry, iono-
D
spheric activity and use of SBAS.
2)
Depends on multipath environment, number of satellites in view; satellite geometry, iono-
spheric activity.
3)
After calibration.
4)
Based on a 40 second time constant.
284
GPS Azimuth Adjustment Tool
Tablet Specification
ed
Model Fieldbook
e t i s includ ly
b l pp
The ta cope of su
Display
s
in the
LCD Size 10ʺ TFT LCD
Brightness Best-in-class sunlight readable Display - ECR 11.19 at 50.000 lux
Max Resolution 1366 (H) x 768 (V)
Touch Screen Polarized capacitive type
Operating System Android 4.x
Memory 32 GB eMMC Flash + 1 GB SDRAM
Storage Micro SD Slot
Communication
W-LAN 802.11 b/g/n
Bluetooth Bluetooth 4.0
Modem 3.5 G
RFID HF RFID; ISO 14443A; ISO 14443B; ISO 15693; NFC
Data Collection
Barcode 1D laser / 2D imager scan eingine
Camera (Back) 5 megapixels CMOS camera
Camera (Front) 1.2 megapixels CMOS camera
I/O Interface
Audio 1 x 1.5 W speaker; 1 x Digital Mic
Expansion 1 x USB 2.0; 1 x DC Jack
Power Internal Smart Lithium Polymer battery, 10000 mAH, 3.7 V
Environment
Operating Temperatur −10 °C to +40 °C
Storage Temperatur −10 °C to +60 °C
Drop Survival 1.8 m
Protection class IP 65 & MIL-STD810G
Certification CE / FCC / UL
Dimensions (L x W x H) 287 x 189 x 28 mm
Weight 1.1 kg
Scope of Supply GPS Azimuth Adjustment Tool; Tablet PC;Adapterplates;

Charging Device;
Storage and carrying bag; Cables
Shipment Dimension 735 x 300 x 350 mm
(L x W x H)
Shipment Weight 5.2 kg
Please note: The installation team must be properly qualified and also be
familiar with the relevant national safety regulations! Non-obser-
vance of these instructions may damage or destroy the devices.
Death or severe injuries may occur!
The details given in the product documentation must be
carefully followed during the installation and operation of the
GPS Azimuth Adjustment Tool (read the product documentation
thoroughly before connecting the GPS Azimuth Adjustment Tool
to the power supply).
Mounting
285
Protection Caps
Protection Caps IP 68 for 7-16 Female Connectors
Technical Data
Type No. 81610014

Material ABS PC
Application Indoor or outdoor (IP 68)
Temperature range °C –30 ... +95
Weight g 3
lb 0.007
Height mm 16
inches 0.63
Diameter mm 32
inches 1.26
Quantity per pack pcs 100
Technical Data
Type No. 78211293

Material Brass, silver-plating
Temperature range °C −65 ... +165
Weight g 60
lb 0.132
Height mm 22
inches 0.87
Diameter mm 32
inches 1.26
Protection Caps IP 68 for 4.3-10 Female Connectors
Technical Data
Type No. 78211297

Material Metal
Weight g 27.9
lb 0.062
Height mm 17.3
inches 0.68
Diameter mm 24.8
inches 0.97
Max. torque tightening Nm 5
Protection Caps for RET Spindle

85010004
Packing unit: 5 pieces
286
Antenna Line Products
Multi-Band Combiners
Dual-Band Combiners
Multi-Band Combiners Triple-Band Combiners
Quad-Band Combiners
Same-Band and Hybrid Combiners

Band-Pass Filter
S
ame-Band Combiners Hybrid Combiner
and Hybrid Combiners 3 dB Couplers
Same-Band Combiner
System Components and Accessories

Smart Bias Tees
DC-Stops
S
ystem Components Attenuators
and Accessories
50 Ω Loads
Clamp Set DTMAs
DTMAs
Catalogue 2019 —>
Alterations to the Catalogue of 2018
Not longer in the catalogue 2019 Comments / Replacement

Multi-Band Combiner
Triple-Band Combiner
78211400 78211400V43
78211401 78211401V43
78211402 78211402V43
78211403 78211403V43
78211404 78211404V43
78211405 78211405V43
78211407
78211408
78211409
Same-Band and Hybrid Combiner
Hybrid Combiner
78210504 78210507
System Components
50-Ohm Load
K6226317
DTMAs
78211103V43
78211106V43 78211107
78211106V44 78211107V02
78211106V45
78211145V43 78211245V43
Please note: New type numbers in the catalogue 2019 are shown and coloured in the respective register of the different
product families.
All phased-out types will be available on request until end of 2019 unless otherwise announced.
According information can be found on our website.
All phase-out dates which were already communicated during 2018 remain valid. This list is a general overview
which shows the differences in the 2019 catalogue as compared to the 2018 version.
New Product
288
289
Summary of Filter, Combiner and
Amplifier Types
728.. 78210527 378 78210707V01 338 78210973V43 309
728954 299 78210534 373 78210707V02 338 78210974V43 309
78210536 374 78210708 338 78210975V43 309
731.. 78210581V43 426 78210708V01 338 78210977V43 310
731651 405 78210583V43 427 78210708V02 338 78210977V44 310
78210587 442, 443 78210770 333 78210977V45 310
734.. 78210587V02 442, 443 78210771 333 78210978V43 310
734360 405 78210588 444, 445 78210778V01 334 78210978V44 310
734361 405 78210588V02 444, 445 78210780 349 78210978V45 310
734362 405 78210781 349 78210979V43 311
734363 405 782106.. 78210788V01 350 78210990V43 428, 429
734364 405 78210620V43 318 78210990V44 428, 429
734365 405 78210621V43 318 782108..
78210622V43 318 78210850V01 392 782110..
738.. 78210623V43 318 78210863V04 414, 415 78211000 393
738546 405 78210624V43 318 78210864V04 414, 415 78211055 394 - 396
78210625V43 318 78210872V01 413 78211056 394 - 396
782102.. 78210626V43 319 78210877V01 416 78211065 394 - 396
78210264 300 78210627V43 320 78210880 335 78211066 394 - 396
78210279 317 78210627V44 320 78210881 335
78210627V45 320 78210882 335 782111..
782104.. 78210628V43 320 78210883 335 78211107 430, 431
78210430V43 418 78210628V44 320 78210884 335 78211107V02 430, 431
78210473 402 78210628V45 320 78210885 335 78211144 372
78210475 400 78210660 315 78210887 336 78211175 434, 435
78210484 401 78210661 315 78210887V01 336 78211175V02 434, 435
78210495V43 419 78210662 315 78210887V02 336 78211176 436, 437
78210663 315 78210888 336 78211176V02 436, 437
782105.. 78210664 315 78210888V01 336 78211180 301
78210500 369 78210665 315 78210888V02 336 78211181 301
78210506 370 78210669 316 78210891 404 78211182 301
78210507 371 78210892 404 78211183 301
78210510V43 420, 421 782107.. 78210893 404

78210511V43 420, 421 78210700 337 78210894 404 782112..
78210512V43 422, 423 78210701 337 78211228V01 386
78210512V44 422, 423 78210702 337 782109.. 78211228V03 387
78210517V43 424, 425 78210703 337 78210936 380, 381 78211230 382, 383
78210517V44 424, 425 78210704 337 78210970V43 309 78211235 384, 385
78210524 375 78210705 337 78210971V43 309 78211245V43 432
78210525 376, 377 78210707 338 78210972V43 309 78211275V43 417
290
Amplifier Types
78211280V43 302 78211404V43 358 78211467V01 314 78211537 326
78211281V43 302 78211405V43 358 78211467V02 314 78211537V01 326
78211282V43 302 78211407V43 359 78211468 314 78211537V02 326
78211283V43 302 78211407V44 359 78211468V01 314 78211538 326
78211284V43 302 78211407V45 359 78211468V02 314 78211538V01 326
78211285V43 302 78211408V43 359 78211470 306 78211538V02 326
78211287V43 303 78211408V44 359 78211471 306 78211560 345
78211287V44 303 78211408V45 359 78211472 306 78211561 345
78211287V45 303 78211430V43 304 78211473 306 78211562 345
78211288V43 303 78211431V43 304 78211474 306 78211563 345
78211288V44 303 78211432V43 304 78211475 306 78211564 345
78211288V45 303 78211433V43 304 78211476 307 78211565 345
78211297 286 78211434V43 304 78211477 308 78211567 346
78211435V43 304 78211477V01 308 78211567V01 346
782113.. 78211437V43 305 78211477V02 308 78211567V02 346
78211330V43 433 78211437V44 305 78211478 308 78211568 346
78211332 438, 439 78211437V45 305 78211478V01 308 78211568V01 346
78211332V02 438, 439 78211438V43 305 78211470V02 308 78211568V02 346
78211333 438, 439 78211438V44 305 78211490 341 78211570 347
78211333V02 438, 439 78211438V45 305 78211491 341 78211571 347
78211334 440, 441 78211450 343 78211492 341 78211572 347
78211334V02 440, 441 78211451 343 78211493 341 78211573 347
78211335 440, 441 78211452 343 78211494 341 78211574 347
78211335V02 440, 441 78211453 343 78211495 341 78211575 347
78211340 360 78211454 343 78211497 342 78211577 348
78211341 360 78211455 343 78211497V01 342 78211577V01 348
78211342 360 78211457 344 78211497V02 342 78211577V02 348
78211343 360 78211457V01 344 78211498 342 78211578 348
78211347 361 78211457V02 344 78211498V01 342 78211578V01 348
78211347V01 361 78211458 344 78211498V02 342 78211578V02 348
78211347V02 361 78211458V01 344 78211580 362
78211348 361 78211458V02 344 78211581 362
78211348V01 361 78211460 312 782115.. 78211582 362
78211348V02 361 78211461 312 78211530 324 78211583 362
78211462 312 78211531 324 78211584 362
782114.. 78211463 312 78211532 324 78211585 362
78211400V43 358 78211464 312 78211533 324 78211587 363
78211401V43 358 78211465 312 78211534 324 78211587V01 363
78211402V43 358 78211466 313 78211535 324 78211587V02 363
78211403V43 358 78211467 314 78211536 325 78211588 363
291
Amplifier Types
78211588V01 363 78211762 403 78211838 329 850..
78211588V02 363 78211763 403 78211838V01 329 85010002 405
78211589 364 78211790 330 78211838V02 329 85010003 405
78211592 397 - 399 78211791 330 78211847 368
78211593 397 - 399 78211792 330
78211596 397 - 399 78211793 330 782119..
78211597 397 - 399 78211794 330 78211910 446, 447
78211795 330 78211910V02 446, 447
78211796 331 78211912 448, 449
782116.. 78211797 332 78211912V02 448, 449
78211620 321 78211797V01 332 78211920 351
78211621 321 78211797V02 332 78211921 351
78211622 321 78211798 332 78211922 351

78211623 321 78211798V01 332 78211923 351
78211624 321 78211798V02 332 78211924 351
78211625 321 78211925 351
78211626 322 78211927 352
78211627 323 782118.. 78211927V01 352
78211627V01 323 78211820 339 78211927V02 352
78211627V02 323 78211821 339 78211928 352
78211628 323 78211822 339 78211928V01 352
78211628V01 323 78211823 339 78211928V02 352
78211628V02 323 78211824 339 78211930 353
78211690 355 78211825 339 78211931 353
78211691 355 78211827 340 78211932 353

78211692 355 78211827V01 340 78211933 353
78211693 355 78211827V02 340 78211934 353
78211694 355 78211828 340 78211935 353
78211695 355 78211828V01 340 78211937 354
78211696 356 78211828V02 340 78211937V01 354
78211697 357 78211830 327 78211937V02 354
78211697V01 357 78211831 327 78211938 354
78211697V02 357 78211832 327 78211938V01 354
78211698 357 78211833 327 78211938V02 354
78211698V01 357 78211834 327
78211698V02 357 78211835 327 784..

78211836 328 78410367 401
782117.. 78211837 329
78211760 403 78211837V01 329 793..
78211761 403 78211837V02 329 793554 379
292
Dual-Band Combiners
Multi-Band Combiners Triple-Band Combiners
Quad-Band Combiners
Summary of Multi-Band Combiner Types
Frequency Combinations for Dual-, Triple- and Quad-Band Combiners
Dual-Band Combiners:
Type No. Frequency Connector Combiner Page
[MHz] Type (female) Type
728954 68 - 470 870 - 960 N 299
78210264 50 - 2200 2400 - 2500 N 300
78211180 ... 183 690 - 2180 2400 - 2700 7-16 301
78211280V43 ... -285V43 698 - 806 824 - 960 4.3-10 302
78211287V43 ... -288V45 698 - 806 824 - 960 4.3-10 Auto-sense 303
78211430V43 ... -435V43 694 - 862 880 - 960 4.3-10 304
78211437V43 ... -438V45 694 - 862 880 - 960 4.3-10 Auto-sense 305
78211470 ... -475 703 - 788 791 - 960 4.3-10 306
78211476 703 - 788 791 - 960 4.3-10 Cross-Bypass 307
78211477 ... -478V02 703 - 788 791 - 960 4.3-10 Auto-sense 308
78210970V43 ...-975V43 790 - 862 880 - 960 4.3-10 309
78210977V43 ... -978V45 790 - 862 880 - 960 4.3-10 Auto-sense 310
78210979V43 790 - 862 880 - 960 4.3-10 Cross-Bypass 311
78211460 ... -465 380 - 960 1427 - 3800 4.3-10 312
78211466 380 - 960 1427 - 3800 4.3-10 Cross-Bypass 313
782111467 ... -468V02 380 - 960 1427 - 3800 4.3-10 Auto-sense 314
78210660 ... -665 470 - 960 1710 - 2700 7-16 315
78210669 470 - 960 1710 - 2700 7-16 Cross-Bypass 316
78210279 790 - 1880 1920 - 2170 7-16 317
78210620V43 ... -625V43 1710 - 1880 1920 - 2200 4.3-10 318
78210626V43 1710 - 1880 1920 - 2200 4.3-10 Cross-Bypass 319
78210627V43 ... -628V45 1710 - 1880 1920 - 2200 4.3-10 Auto-sense 320
78211620 ... -625 1427 - 1880 1920 - 2690 4.3-10 321
78211626 1427 - 1880 1920 - 2690 4.3-10 Cross-Bypass 322
78211627 ... -628V02 1427 - 1880 1920 - 2690 4.3-10 Auto-sense 323
78211530 ... -535 1427 - 1518 1710 - 2690 4.3-10 324
78211536 1427 - 1518 1710 - 2690 4.3-10 Cross-Bypass 325
78211537 ... -538V02 1427 - 1518 1710 - 2690 4.3-10 Auto-sense 326
78211830 ... -835 1710 - 2180 2400 - 2700 4.3-10 327
78211836 1710 - 2180 2400 - 2700 4.3-10 Cross-Bypass 328
78211837 ... -38V02 1710 - 2180 2400 - 2700 4.3-10 Auto-sense 329
78211790 ... -795 1427 - 2200 2300 - 2690 4.3-10 330
78211796 1427 - 2200 2300 - 2690 4.3-10 Cross-Bypass 331
78211797 ... -98V02 1427 - 2200 2300 - 2690 4.3-10 Auto-sense 332
78210770 ... -771 1695 - 1780 / 2095 - 2200 1850 - 1920 / 1930 - 2000 7-16 333
78210778V01 1695 - 1780 / 2095 - 2200 1850 - 1920 / 1930 - 2000 7-16 Auto-sense 334
New Product
For more information about accessories please refer to page 391
294
Summary of Multi-Band Combiner Types
Frequency Combinations for Dual-, Triple- and Quad-Band Combiners
Triple-Band Combiners:
78210880 ... -885 703 - 788 791 - 862 880 - 960 4.3-10 335
78210887 ... -888V02 703 - 788 791 - 862 880 - 960 4.3-10 Auto-Sense 336
78210700 ... -705 690 - 806 824 - 960 1427 - 3800 4.3-10 337
78210707 ... -708V02 690 - 806 824 - 960 1427 - 3800 4.3-10 Auto-Sense 338
78211820 ... -825 690 - 862 880 - 960 1427 - 3800 4.3-10 339
78211827 ... -828V02 690 - 862 880 - 960 1427 - 3800 4.3-10 Auto-Sense 340
78211490 ... -495 703 - 788 791 - 960 1427 - 3800 4.3-10 341
78211497 ... -498V02 703 - 788 791 - 960 1427 - 3800 4.3-10 Auto-Sense 342
78211450 ... -455 380 - 960 1427 - 2200 2300 - 2690 4.3-10 343
78211457 ... -458V02 380 - 960 1427 - 2200 2300 - 2690 4.3-10 Auto-Sense 344
78211560 ...-565 380 - 960 1427 - 1880 1920 - 2690 4.3-10 345
78211567 ... -568V02 380 - 960 1427 - 1880 1920 - 2690 4.3-10 Auto-Sense 346
78211570 ... -575 380 - 960 1427 - 1518 1710 - 2690 4.3-10 347
78211577 ... -578V02 380 - 960 1427 - 1518 1710 - 2690 4.3-10 Auto-Sense 348
78210780 ... -781 380 - 960 1695 - 1780 / 2095 - 2200 1850 - 1920 / 1930 - 2000 7-16 349
78210788V01 380 - 960 1695 - 1780 / 2095 - 2200 1850 - 1920 / 1930 - 2000 7-16 Auto-Sense 350
78211920 ... -925 1427 - 1518 1695 - 1880 1920 - 2690 4.3-10 351
78211927 ... -928V02 1427 - 1518 1695 - 1880 1920 - 2690 4.3-10 Auto-Sense 352
78211930 ... -935 1427 - 1518 1695 - 2200 2300 - 2690 4.3-10 353
78211937 ... 938V02 1427 - 1518 1695 - 2200 2300 - 2690 4.3-10 Auto-Sense 354
78211690 ... - 695 1427 - 1880 1920 - 2360 2496 - 2690 4.3-10 355
78211696 1427 - 1880 1920 - 2360 2496 - 2690 4.3-10 Cross-Bypass 356
78211697 ... -698V02 1427 - 1880 1920 - 2360 2496 - 2690 4.3-10 Auto-Sense 357
78211400V43 ... -405V43 1710 - 1880 1920 - 2170 2300 - 2700 4.3-10 358
78211407V43 ... -408V45 1710 - 1880 1920 - 2170 2300 - 2700 4.3-10 Auto-Sense 359
Quad-Band Combiners:
78211340 ... -343 690 - 862 880 - 960 1427 - 1880 1920 - 2690 4.3-10 360
78211347 ... -348V02 690 - 862 880 - 960 1427 - 1880 1920 - 2690 4.3-10 Auto-Sense 361
78211580 ... -585 380 - 960 1427 - 1880 1920 - 2200 2300 - 2690 4.3-10 362
78211587 ... -588V02 380 - 960 1427 - 1880 1920 - 2200 2300 - 2690 4.3-10 Auto-Sense 363
78211589 380 - 960 1427 - 1880 1920 - 2200 2300 - 2690 4.3-10 Cross-Bypass 364
New Product
295
296
Frequency / MHz
Type No. Connector Autosense
200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 4000
Dual-Band Combiner
728954 N 68 - 470 870 - 970
78210264 N 50 - 2200 2400 - 2500
7821118x 7/16 690 - 2180 2400 - 2700
7821128xV4x 4.3-10 ● 698 - 806 824 - 960
7821143xV4x 4.3-10 ● 694 - 862 880 - 960
7821147x 4.3-10 ● 703 - 788 791 - 960
7821097xV4x 4.3-10 ● 790 - 862 880 - 960
7821146x 4.3-10 ● 380 - 960 1427 - 3800
7821066x 7/16 470 - 960 1710 - 2700
78210279 7/16 790 - 1880 1920 - 2170
7821062xV4x 4.3-10 ● 1710 - 1880 1920 - 2200
7821162x 4.3-10 ● 1427 - 1880 1920 - 2690
7821153x 4.3-10 ● 1427 - 1518 1710 - 2690
7821183x 4.3-10 ● 1710 - 2180 2400 - 2700
7821179x 4.3-10 ● 1427 - 2200 2300 - 2690
1695-1780 1850-2000 2095-2200
7821077x AMERICA 7/16 ●
7821088x 4.3-10 ● 703 - 788 791 - 862 / 880 - 960
7821070x 4.3-10 ● 690 - 806 824 - 960 1427 - 3800
7821182x 4.3-10 ● 690 - 862 880 - 960 1427 - 3800
7821149x 4.3-10 ● 703 - 788 791 - 960 1427 - 3800
7821145x 4.3-10 ● 380 - 960 1427 -2200 2300 - 2690
7821156x 4.3-10 ● 380 - 960 1427 - 1880 1920 - 2690
7821157x 4.3-10 ● 380 - 960 1427 - 1518 1710 - 2690
7821078x AMERICA 7/16 ● 380 - 960 1695-1780 1850-2000 2095-2200
7821192x 4.3-10 ● 1427 - 1518 1695 - 1880 1920 - 2690
7821193x 4.3-10 ● 1427 - 1518 1695 - 2200 2300 - 2690
7821169x 4.3-10 ● 1427 - 1880 1920 - 2360 2496 - 2690
7821140xV4x 4.3-10 ● 1710 - 1880 1920 - 2170 2300 - 2700
Quad-Band Combiner
7821158x 4.3-10 ● 380 - 960 1427 - 1880 1920 - 2200 2300 - 2690
7821134x 4.3-10 ● 690 - 862 880 - 960 1427 - 1880 1920 - 2690
Auto-Sense Combiner
Functionality & Benefits
In order to enable the control of ALDs1) when deploying standard multi-band combiners in mobile commu-
nication networks, such combiners are fitted with integrated DC/AISG bypass circuits. Depending on the
application, different bypass configurations are available. The correct bypass combination needs to be
selected in order to ensure the proper control and configuration of the ALDs.
With KATHREIN Auto-Sense Combiners the correct bypass is detected automatically, thereby enabling safe
and easy deployment in universal applications.
How does it work?

Two different modes
to antenna /ALD
KATHREIN Auto-Sense Combiners automatically switch into the
appropriate mode by checking the DC voltage on all ports.
split mode
Split mode: close to the antenna
•KATHREIN Combiners detect if an ALD (DC load) or an antenna
(short circuit) is connected to a port and therefore bypass or block
the DC/AISG signal.
•LEDs for each port indicate if DC is bypassed or not.
Combine mode: close to the BTS
•Automatic detection of DC voltage on one or more input ports. combine
DC/AISG signal is bypassed to connected ALDs according to three mode
different functional preconfigurations.

•In combine mode, LEDs show if DC is connected to a port and
which DC/AISG signal is put through to the common port.
Three different functional preconfigurations

KATHREIN Auto-Sense Combiners are available in three variants with
different preconfigured functions.
First In – First Out function
•The first BTS which supplies DC voltage at any input port is bypassed to
the common port, other DC/AISG signals will be ignored and blocked.
•After installation, LED lights help to adjust the system by indicating the
bypass situation.
Priority Controlled function

•The combiner detects all ports that are supplied with DC and bypasses the AISG/DC signal with the high-
est priority according to a preprogrammed priority table setting. (For detailed information on the preset
priorities of each combiner, please check the latest datasheets on our website.)
•During the detection phase, LED lights indicate which port/signal is bypassed and which ones are
blocked. If a new base station is connected during this phase, the combiner automatically switches the
DC/AISG bypass to this port if the priority is higher than the one of the currently bypassed port.
1)
ALD = Antenna Line Device
297
Auto-Sense Combiner
Functionality & Benefits
Exclusive User function

•If the Exclusive User function is set in the combiner, the first base station which supplies an appropriate
DC voltage at any input port is bypassed to the common port.
•If a second DC/AISG signal is erroneously fed into the combiner, then none of the DC/AISG signals will be
allowed to bypass to the common port. The DC/AISG functionality at the common port will be disabled
and the LEDs start blinking in red until only one DC/AISG signal is connected.
Benefits & features
•LED status indication

Installation mistakes can be easily revealed as LEDs for each port indicate if DC is bypassed or not and
even if the DC is blocked.
Green LED light indicates that this is the port / DC signal

that is bypassed to the common port.
Red light indicates that this port would also be supplied

with a DC/AISG signal, but the signal is blocked.
No light indicates that no DC has been detected on this

port.
combine mode
•Simplification
KATHREIN Auto-Sense Combiners can be used for split and combine applications – one type for all DC
bypass situations. As soon as DC is connected to the combiner, the combiner will detect its role in the
system and automatically adjust the behavior accordingly.
•Savings and efficiency

The multi usability of KATHREIN Auto-Sense Combiners helps to reduce stock, ordering logistics and
number of parts. No external DC stops are required either.
For more detailed information please see our functional description of Auto-Sense Combiners on our
website.
298
Dual-Band Combiner
68 – 470 MHz 870 – 970 MHz
• Designed for inhouse multiband distribution Port 1

network
• Enables feeder sharing Port 2
• DC by-pass between port 1 and port 3

• Built-in DC stop between port 2 and port 3
Technical Data
Type No. 728954

Pass band
Band 1 MHz 68 – 470
Band 2 MHz 870 – 970
Insertion loss
Port 1 ↔ Port 3 dB < 0.5 (68 – 470 MHz)
Port 2 ↔ Port 3 dB < 0.5 (870 – 970 MHz)
Isolation
Port 1 ↔ Port 2 dB > 45
VSWR < 1.2
Impedance Ω 50
Input power
Band 1 W < 50
Band 2 W < 50
Temperature range °C | °F −20 ... +70 | −4 ... +158
Connectors N female
Application Indoor
DC transparency
Port 1 ↔ Port 3 mA By-pass (max. 2500)
Port 2 ↔ Port 3 Short circuited
Port 3 ↔ Port 2 Stop
Packing size mm | in 285 x 55 x 125 | 11.2 x 2.2 x 4.9
Dimensions (w x h x d) mm | in 229 x 32 x 112 | 9.0 x 1.3 x 4.4
(without connectors)
299
Dual-Band Combiner
50 – 2200 MHz 2400 – 2500 MHz
• Designed for inhouse multiband distribution networks

• Enables feeder sharing
• DC by-pass between ports 1 and 3
• Built-in DC stop between port 2 and 3
Port 1
Port 2
Technical Data
Type No. 78210264
Pass band
Band 1 [MHz] 50 – 2200
Band 2 [MHz] 2400 – 2500
Insertion loss
Port 1 ↔ Port 3 [dB] < 0.1 (50 – 2200 MHz)
Port 2 ↔ Port 3 [dB] < 0.2 (2400 – 2500 MHz)
Isolation
Port 1 ↔ Port 2 [dB] > 50 (50 – 2200 / 2400 – 2500 MHz)
VSWR < 1.25 (50 – 2200 / 2400 – 2500 MHz)
Impedance [Ω] 50
Input power
Band 1 [W] < 200
Band 2 [W] < 200
Intermodulation products [dBc] < –150 dBc (3rd order; with 2 x 20 W)
Temperature range [°C | °F] –20 ... +55 | –4 ... +131
Connectors N female
Application Indoor
Special features Built-in DC stop between ports 2 and 3*
Mounting With 4 screws (max. 4 mm diameter)
Weight [kg | lb] 0.47 | 1.0
Packing size [mm | in] 225 x 140 x 75 | 8.9 x 5.6 x 3.0
Dimensions (w x h x d)[mm | in] 86 x 30.4 x 181.4 | 3.4 x 1.2 x 7.1
(including connectors and mounting feet)
* DC by-pass between ports 1 and 3 (max. 2500 mA)
300
Dual-Band Combiner
380 (690) – 2180 MHz 2400 – 2700 MHz
• Designed for co-siting purposes

Port 3
• Can be used as a combiner near the BTS or Port 1
in a reciprocal function near the antenna
• Suitable for indoor or outdoor applications Port 2
• Wall or mast mounting
• Available as a single unit, or for XPol Single Unit Double Unit
antennas as a double unit
• Built-in lightning protection
• External DC stop available as an
accessory
• Extremely small dimensions
and low weight
• Very low insertion loss
• High input power
Technical Data
Type No. 78211180 78211182

Single Unit Single Unit
78211181 78211183
Double Unit Double Unit
Pass band
Band 1 MHz 690 – 2180
Band 2 MHz 2400 – 2700
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (690 – 2180 MHz) typ. 0.1
Port 2 ↔ Port 3 dB < 0.15 (2400 – 2700 MHz) typ. 0.1
Isolation
Port 1 ↔ Port 2 dB > 50 (690 – 2180 MHz), > 48 (2400 – 2700 MHz)
VSWR < 1.22 (690 – 2180 MHz)
< 1.2 (2400 – 2700 MHz)
Impedance Ω 50
Input power
Band 1 / Band 2 W < 500/ < 500
Intermodulation dBc < −160 (3 order; with 2 x 20 W)
rd
products
Connectors 7-16 female (long neck)
DC/AISG transparency
Port 1 ↔ Port 3 mA By-pass (max. 2500) Stop
Port 2 ↔ Port 3 mA By-pass (max. 2500) By-pass (max. 2500)
Lightning protection kA 3, 10/350 µs pulse
Mounting Wall mounting: With 4 screws (max. 8 mm diameter) / Mast mounting: With additional clamp set
Weight kg | lb Single Unit: 1.5 | 3.3 / Double Unit: 2.8 | 6.2
Dimensions (w x h x d) mm | in Single Unit: 141 x 119 x 48 | 5.6 x 4.7 x 1.9 / Double Unit: 141 x 119 x 99 | 5.6 x 4.7 x 3.9
(without connectors, without mounting brackets)
Packing size mm | in Single Unit: 266 x 196 x 130 | 10.5 x 7.7 x 5.1 / Double Unit: 266 x 196 x 180 | 10.5 x 7.7 x 7.1
301
Dual-Band Combiner
698 - 806 MHz 824 - 960 MHz
• Can be used as a combiner near the BTS or in a

reciprocal function near the antenna
• Available as a single unit, or for XPol antennas as
double unit
• Suitable for indoor and outdoor applications
• Built-in lightning protection Single Unit Double Unit
• External DC stop available as an accessory
698-806 824-960 698-806 824-960 698-806 824-960
Technical Data
Type No. 78211280V43 78211282V43 78211284V43

Single Unit Single Unit Single Unit
78211281V43 78211283V43 78211285V43
Double Unit Double Unit Double Unit
Pass band
Band 1 MHz 698 – 806
Band 2 MHz 824 – 960
Insertion loss
Port 1 ↔ Port 3 dB < 0.3 (698 – 796 MHz); < 0.5 (796 – 806 MHz)
Isolation
VSWR < 1.2
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Intermodulation products dBc < –160 (3rd order; with 2 x 20 W)
Temperature range °C | °F –40 ... +60 | –40 ... +140
Connectors 4.3-10 female
Port 1 ↔ Port 3 mA By-pass (max. 2500) Stop By-pass (max. 2500)
Port 2 ↔ Port 3 mA By-pass (max. 2500) By-pass (max. 2500) Stop
Mounting mm | in Wall mounting: With 4 screws (max. 8 | 0.315 diameter)
Mast mounting: With additional clamp set
Packing size mm | in Single unit: 365 x 235 x 145 | 14.4 x 9.3 x 5.7 / Double unit: 365 x 235 x 210 | 14.4 x 9.3 x 8.9
Dimensions (w x h x d) mm | in Single Unit: 153 x 170.5 x 66.3 | 6.0 x 6.7 x 2.5
Double Unit: 153 x 170.5 x 137.3 | 6.0 x 6.7 x 5.2
302
Dual-Band Combiner
698 – 806 MHz 824 – 960 MHz
• Can be used as a combiner near the BTS or in a reciprocal AUTO-

function near the antenna SENSE
• Integrated auto-sense technology for automatic DC / AISG
detection and bypass functionality.
Combine Mode (near BTS):
In combine mode, the auto-sense combiner has the ability to
operate in three different functions:
1. First In - First Out Function
2. Priority Controlled Function
3. Exclusive User Function
Split Mode (near antenna):
In split mode, the auto-sense combiner automatically detects
connected Antenna Line Devices and bypasses or stops the DC
/ AISG signal accordingly.
A detailed manual about Auto-Sense technology can be
downloaded on our homepage.
• Available as a single unit, or for XPol antennas as a double unit
Technical Data
Type No.
1. First In - First Out Function 78211287V43 ps
78211288V43
clam d
2. Priority Controlled Function 78211287V44 incl u de 78211288V44
3. Exclusive User Function 78211287V45 78211288V45
Unit Single Double
Pass band
Band 1 MHz 698 – 806
Band 2 MHz 824 – 960
Insertion loss
Isolation
VSWR < 1.2
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Intermodulation products dBc < −160 (3rd order; with 2 x 20 W)
Port 1 ↔ Port 3 mA Auto-sense (max. 2000)
Mounting mm | Wall mounting: With 4 screws (max. 8 | 0.315 diameter)
in Mast mounting: With included clamp set
Windload (at Rated Wind N | lbf Single Unit: 49 | 11.0 (frontal) Double Unit: 49 | 11.0 (frontal)
Speed: 150 km/h) N | lbf Single Unit: 15 | 3.4 (lateral) Double Unit: 40 | 9.0 (lateral)
303
Dual-Band Combiner
694 - 862 MHz 880 - 960 MHz

double unit
• Wall or mast mounting Single Unit
• Built-in lightning protection Double Unit
Technical Data 694 - 862 880 - 960 694 - 862 880 - 960 694 - 862 880 - 960
Type No. 78211430V43 78211432V43 78211434V43

78211431V43 78211433V43 78211435V43
Pass band
Band 1 MHz 694 - 862
Band 2 MHz 880 - 960
Insertion loss
Port 1 ↔ Port 3 dB < 0.4, typically 0.2 (694 - 862 MHz)
Isolation
Port 1 ↔ Port 2 dB > 45 (694 - 862 MHz / 880 - 960 MHz)
VSWR < 1.25 (694 - 862 / 880 - 960 MHz)
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Intermodulation products dBc < -160 (3rd order; with 2 x 20 W)
Temperature range °C | °F -40 ... +60 | -40 ... -140
Mounting mm | in Wall mounting: With 4 screws (max. 8 mm diameter) /
Weight kg | lb Single Unit: 3 | 6.6 / Double Unit: 6 | 13.2
Dimensions (w x h x d) mm | in Single Unit: 200 x 213.5 x 65.5 mm | 7.9 x 8.4 x 2.6
Double Unit: 200 x 213.5 x 136.5 | 7.9 x 8.4 x 5.4
304
Dual-Band Combiner
694 – 862 MHz 880 – 960 MHz
• Can be used as a combiner near the BTS or in a AUTO-

reciprocal function near the antenna SENSE
• Integrated auto-sense technology for automatic DC /
AISG detection and bypass functionality.
In combine mode, the auto-sense combiner has the
ability to operate in three different functions:
Single Unit Double Unit
In split mode, the auto-sense combiner automatically
detects connected Antenna Line Devices and bypasses Port 3
or stops the DC / AISG signal accordingly.
• Available as a single unit, or for XPol antennas as a
double unit
• Suitable for indoor and outdoor applications DC / AISG
• Wall or mast mounting Auto-Sense
Port 1 Port 2
694 - 862 880 - 960
Technical Data
Type No.
1. First In - First Out Function 78211437V43 78211438V43

2. Priority Controlled Function 78211437V44 78211438V44
Unit Single Double
Pass band
Band 1 MHz 694 – 862
Band 2 MHz 880 – 960
Insertion loss
Port 1 ↔ Port 3 dB < 0.4, typically 0.2 (694 – 862 MHz)
Isolation
Port 1 ↔ Port 2 dB > 45 (694 – 862 MHz / 880 – 960 MHz)
VSWR < 1.25 (694 – 862 / 880 – 960 MHz)
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Intermodulation dBc < –160 (3rd order; with 2 x 20 W)
products
Mounting mm | in Wall mounting: With 4 screws (max. 8 mm diameter) / Mast mounting: With additional clamp set
Dimensions (w x h x d) mm | in Single Unit: 200 x 214 x 84 | 7.9 x 8.4 x 3.3
Double Unit: 200 x 214 x 173 | 7.9 x 8.4 x 6.8
305
Dual-Band Combiner
703 – 788 MHz 791 – 960 MHz

Port 3
• Available as a single unit, or for XPol antennas as Port 1
double unit
• Suitable for indoor and outdoor applications Port 2
• Wall or mast mounting Single Unit Double Unit
703 – 788 791 – 960 703 – 788 791 – 960 703 – 788 791 – 960
Technical Data
Type No. 78211470 78211472 78211474
78211471 78211473 78211475
Pass band
Band 1 MHz 703 – 788
Band 2 MHz 791 – 960
Insertion loss
Port 1 ↔ Port 3 dB < 0.7 (703 – 785 MHz) / < 1.0 (785 – 787 MHz) / < 1.5 (787 – 788 MHz)
Isolation
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 200 / < 200
Intermodulation products dBc < −160 (3 order; with 2 x 20 W)
rd

Mounting mm | in Wall mounting: With 4 screws (max. diameter 8 | 0.315) /
Weight kg | lb Single unit: 6.2 | 13.7 / Double unit: 12 | 26.5
Dimensions (w x h x d) mm | in Single unit: 258 x 301 x 88 | 10.2 x 11.9 x 3.5 / Double unit: 258 x 301 x 178 | 10.2 x 11.9 x 7.0
Packin size mm | in Single unit: 477 x 334 x 175 | 18.8 x 13.1 x 6.9 / Double unit: 477 x 334 x 265 | 18.8 x 13.1 x 10.4
306
Dual-Band Combiner
703 – 788 MHz 791 – 960 MHz

Unit 2
• External DC stop available as an accessory Unit 1
Double Unit
703 – 788 791 – 960 703 – 788 791 – 960
Technical Data Unit 1 Unit 2

Type No. 78211476
Double Unit
Pass band
Band 1 MHz 703 – 788
Band 2 MHz 791 – 960
Insertion loss
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 200 / < 200
DC/AISG transparency Unit 1 Unit 2
Port 2 ↔ Port 3 mA Stop By-pass (max. 2500)
Mounting mm | in Wall mounting: With 4 screws (max. 8 | 0.315 diameter) /
307
Dual-Band Combiner
703 – 788 MHz 791 – 960 MHz

2. Priority Controlled Function Single Unit Double Unit
detects connected Antenna Line Devices and bypasses
double unit
703 - 788 791 - 960
Technical Data
Type No.
1. First In - First Out Function 78211477 78211478
Unit Single Double
Pass band
Band 1 MHz 703 – 788
Band 2 MHz 791 – 960
Insertion loss
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 200 / < 200
Port 1 ↔ Port3 mA Auto-sense (max. 2000)
Mounting mm | Wall mounting: With 4 screws (max. 8 | 0.315 diameter) /
in Mast mounting: With additional clamp set
Dimensions mm | Single Unit: 258 x 301 x 88 | 10.2 x 11.9 x 3.5
in Double Unit: 258 x 301 x 178 | 10.2 x 11.9 x 7.0
Packing size mm | Single Unit: 477 x 334 x 175 | 18.8 x 13.1 x 6.9
in Double Unit: 477 x 334 x 265 | 18.8 x 13.1 x 10.4
308
Dual-Band Combiner
790 – 862 MHz 880 – 960 MHz

reciprocal function near the antenna Port 3
double unit
Technical Data
Type No. 78210970V43 78210972V43 78210974V43
78210971V43 78210973V43 78210975V43
Pass band
Band 1 MHz 790 – 862
Band 2 MHz 880 – 960
Insertion loss
Port 1 ↔ Port 3 dB < 0.4, typically 0.2 dB (790 – 862 MHz)
Port 2 ↔ Port 3 dB < 0.4, typically 0.2 dB (880 – 960 MHz)
Isolation
Port 1 ↔ Port 2 dB > 50 (790 - 862 MHz / 880 – 960 MHz)
VSWR < 1.25 (790 – 862 / 880 – 960 MHz)
Impedance Ω 50
Input power
Band 1 / Band 2 W < 200 / < 200
Intermodulation products dBc < -160 dBc (3rd order; with 2 x 20 W)
Temperature range °C | °F -40 ... +60 |-40 ... +140
Mounting Wall mounting: With 4 screws (max. 8 mm diameter) /
Dimensions (w x h x d) mm | in Single Unit: 177 x 52 x 209 | 7.0 x 2.0 x 8.2/ Double Unit: 177 x 108 x 209 | 7.0 x 4.3 x 8.2
309
Dual-Band Combiner
790 – 862 MHz 880 – 960 MHz
• Can be used as a combiner near the BTS or in a reciprocal AUTO-

function near the antenna SENSE
• Integrated auto-sense technology for automatic DC / AISG
detection and bypass functionality.
In combine mode, the auto-sense combiner has the ability to
operate in three different functions:
In split mode, the auto-sense combiner automatically detects
connected Antenna Line Devices and bypasses or stops the
DC / AISG signal accordingly.
• Available as a single unit, or for XPol antennas as a double unit
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 790 – 862
Band 2 MHz 880 – 960
Insertion loss
Port 1 ↔ Port 3 dB < 0.4 (790 – 862 MHz)
Port 2 ↔ Port 3 dB < 0.4 (880 – 960 MHz)
Isolation
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
310
Dual-Band Combiner
790 - 862 MHz 880 - 960 MHz
• Can be used as a combiner near the BTS or in a Unit 2

Unit 1
Technical Data
Type No. 78210979V43

Double Unit
Pass band
Band 1 MHz 790 - 862
Band 2 MHz 880 - 960
Insertion loss
Isolation
Port 1 ↔ Port 2 dB > 50 dB (790 - 862 MHz / 880 - 960 MHz)
VSWR < 1.25 (790 - 862 / 880 - 960 MHz)
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Temperature range °C | °F -40 ... +60 | -40 ... +140
Mounting Wall mounting: With 4 screws (max. 8 mm diameter)
Dimensions (w x h x d) mm | in 177.4 x 209.4 x 108.35 | 7.0 x 8.2 x 4.3
311
Dual-Band Combiner
380 – 960 MHz 1427 – 3800 MHz


• Designed for co-siting purposes Port 1
double unit
Port 2 Single Unit Double Unit
Technical Data
Type No. 78211460 78211462 78211464
78211461 78211463 78211465
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1427 – 3800
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 3 dB < 0.2 (1427 – 3800 MHz)
Isolation
Port 1 Port 2 dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300 / < 200 (1427 – 2700 MHz); < 100 (2700 – 3800 MHz);
Intermodulation Products dBc < -160 (3rd order; with 2 x 20 W)
Double Unit: 183 x 117 x 115 | 7.2 x 4.6 x 4.5
312
Dual-Band Combiner
380 – 960 MHz 1427 – 3800 MHz

Unit 2
Double Unit
380 – 960 MHz 1427 – 3800 MHz 380 – 960 MHz 1427 – 3800 MHz

Type No. 78211466
Double Unit
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1427 – 3800
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 3 dB < 0.2 (1427 – 3800 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300 / < 200 (1427 - 2700 MHz); < 100 (2700 - 3800 MHz)
313
Dual-Band Combiner
380 – 960 MHz 1427 – 3800 MHz

Port 3
Combine Mode (near BTS): Port 1
2. Priority Controlled Function Port 2
In split mode, the auto-sense combiner automatically Port 3
double unit
DC / AISG
Auto-Sense

Port 1 Port 2
380 - 960 1427 - 3800
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1427 – 3800
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 3 dB < 0.2 (1427 – 3800 MHz)
Isolation
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300 / < 200 (1427 – 2700 MHz); < 100 (2700 – 3800 MHz)
Wind load (at Rated Wind N | lbf frontal: 42 | 9 frontal: 42 | 9
Speed 150 km/h | 93 lateral: 11 | 2 lateral: 31 | 7
mph)
Dimensions (w x h x d) mm | in Single Unit: 183 x 117 x 55 | 7.2 x 4.6 x 2.2; Double Unit: 183 x 117 x 115 | 7.2 x 4.6 x 4.5
314
Dual-Band Combiner
Dual-Band Combiner
470 – 960 MHz 1710 – 2700 MHz
LTE 800 / CDMA 850 / GSM 900 GSM 1800 / UMTS 2100 / WiMAX / LTE 2600
470 – 960 MHz 1710 – 2700 MHz

• Can be used as a combiner near the BTS or

• Available as a single unit, or for XPol antennas Port 3
as a double unit
• Built-in lightning protection Port 2
• External DC stop available as an accessory 782 10660, 782 10662, 782 10664 782 10661, 782 10663, 782 10665
• Extremely small dimensions and low weight
470 – 960 1710 – 2700 470 – 960 1710 – 2700 470 – 960 1710 – 2700
Technical Data
Technical Data
Type No. 78210660 78210662 78210664
Type No. 782 10660
Single Unit 782 10662
Single Unit 782 10664
Single Unit
78210661
782 10661 78210663
782 10663 78210665
782 10665
Double Unit
Double Unit Double
Double Unit Unit Double Unit
Double Unit
Pass
Pass band
band
Band 11
Band MHz 470 – 960
470MHz
– 960
Band 22
Band MHz 1710 – 2700
1710 –MHz
2700
Insertion loss
Insertion
Port 1 loss
Port 3 < 0.1 dB (470 – 960 MHz)
Port
Port 12↔Port
Port33 dB < 0.1 dB<(1710
0.1 (470 – 960MHz)
– 2700 MHz)
Port 2 ↔ Port 3
Isolation dB < 0.1 (1710 – 2700 MHz)
Port 1 Port 2 > 55 dB (470 – 960 MHz) / > 65 dB (1710 – 2700 MHz)
Isolation
VSWR
Port 1 ↔ Port 2 dB > 55< dB
1.2(470
(470––960
960MHz)
/ 1710
/ >–65
2700
dB MHz)
(1710 – 2700 MHz)
Impedance 50 Ohm
VSWR < 1.2 (470 – 960 / 1710 – 2700 MHz)
Input power
Impedance
Band 1 / Band 2 Ω 50 W
< 650 W / < 350
Subject to alteration.
Input power products

Intermodulation < –160 dBc (3 rd order with 2 x 20 W)
Temperature range
Band 1 / Band 2 W –55 ... +60 /°C
< 650 < 350
Connectors
Intermodulation products dBc 7-16 female
< −160 (long with
(3rd order; neck)2 x 20 W)
Port 1 Port 3
Connectors By-pass (max. 2500 mA) 7-16Stop
female (long neck) By-pass (max. 2500 mA)
Port 2 Port 3 By-pass (max. 2500 mA) By-pass (max. 2500 mA) Stop
936.3891/a
Lightning protection 3 kA, 10/350 s pulse

DC/AISG
Mounting transparency Wall mounting: With 4 screws (max. 8 mm diameter) / Mast mounting: With additional clamp set
Port 1 ↔ Port 3
Weight mA By-pass (max. 2500) Stop Unit: 2.4 kg
Single Unit: 1.2 kg / Double By-pass (max. 2500)
Packing size Single Unit: 285 x 157 x 93 mm / Double Unit: 285 x 157 x 148 mm
Lightning
Dimensionsprotection
(w x h x d) kA Single Unit: 126 x 145 x 383mm
kA, /10/350
Doubleµs pulse
Unit: 126 x 145 x 93 mm
Mounting Wall mounting: With(without
4 screwsconnectors,
(max. 8 mmwithout mounting
diameter) brackets)
/ Mast mounting: With additional clamp set
Dimensions (w
www.kathrein.de x h x d) mm | in 782 10660, 782Single
10661,Unit:
782 126
10662, 782
x 145 10663,
x 38 | 5.0782 10664,
x 5.7 x 1.5 782 10665 Page 1 of 2
Double Unit: 126 x 145 x 93 | 5.0 x 5.7 x 3.7
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494
Packing size mm | in Single Unit: 285 x 157 x 93 | 11.2 x 6.2 x 3.7/ Double Unit: 285 x 157 x 148 | 11.2 x 6.2 x 5.8
315
Dual-Band Combiner
470 – 960 MHz 1710 – 2700 MHz
• Designed to support separate DC/AISG supply

Unit 2
for a low-band and high-band DTMA via 2 feeder
cables (see application)

in a reciprocal function near the antenna Port 1
• Suitable for indoor or outdoor applications

• Wall or mast mounting Port 2 Unit 1
• Double unit for XPol antennas
• Extremely small dimensions and low weight
Technical Data
Type No. 78210669
Double Unit
Pass band
Band 1 MHz 470 – 960
Band 2 MHz 1710 – 2700
Insertion loss
Port 1 ↔ Port 3 dB < 0.1 (470 – 960 MHz)
Port 2 ↔ Port 3 dB < 0.1 (1710 – 2700 MHz)
Isolation
Port 1 ↔ Port 2 dB > 55 (470 – 960 MHz) / > 65 (1710 – 2700 MHz)
VSWR < 1.2 (470 – 960 / 1710 – 2700 MHz)
Impedance Ω 50
Input power
Band 1 / Band 2 W < 650 / < 350
rd

316
Dual-Band Combiner
790 – 1880 MHz 1920 – 2170 MHz

double unit
Technical Data
Type No. 78210279
Double Unit
Pass band
Band 1 MHz 790 – 1880
Band 2 MHz 1920 – 2170
Insertion loss
Port 1 ↔ Port 3 dB < 0.1, typically 0.05 (790 – 960 MHz) / < 0.4, typically 0.2 (1710 – 1880 MHz)
Isolation
Port 1 ↔ Port 2 dB > 55 (790 – 960 MHz)
> 50 (1710 – 1880 MHz, 1920 – 1980 MHz, 2110 – 2170 MHz)
VSWR < 1.2 (790 – 960 MHz) / < 1.25 (1710 – 1880 MHz) / < 1.2 (1920 – 2170 MHz)
Impedance Ω 50
Input power
Band 1 / Band 2 W < 500 / < 500
Intermodulation pro- dBc < – 160 (3rd order; with 2 x 20 W)
ducts
Port 1 ↔ Port 3 mA By-pass (max. 2500 mA)
Port 2 ↔ Port 3 mA By-pass (max. 2500 mA)
317
Dual-Band Combiner
1710 – 1880 MHz 1920 – 2200 MHz
• Can be used as a combiner near the BTS or in a Port 3


Port 2
Technical Data
Type No. 78210620V43 78210622V43 78210624V43
78210621V43 78210623V43 78210625V43
Pass band
Band 1 (GSM 1800) MHz 1710 – 1880
Band 2 (UMTS) MHz 1920 – 2200
Insertion loss
Port 1 ↔ Port 3 dB < 0.3 (1710 – 1880 MHz)
Port 2 ↔ Port 3 dB < 0.3 (1920 – 2200 MHz)
Isolation
Port 1 ↔ Port 2 dB > 55 (1710 – 1880) / > 50 (1920 – 2200 MHz)
VSWR < 1.2 (1710 – 1880) / (1920 – 2200 MHz)
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300 / < 300
Port 1 ↔ Port 3 By-pass (max. 2500 mA) Stop By-pass (max. 2500 mA)
Port 2 ↔ Port 3 By-pass (max. 2500 mA) By-pass (max. 2500 mA) Stop
Dimensions (w x h x d) mm | in Single Unit: 163.5 x 195.3 x 46 | 6.4 x 7.7 x 1.8
Double Unit: 163.5 x 195.3 x 102 | 6.4 x 7.7 x 4.0
Packing size mm | in Single Unit: 392 x 272 x 139 | 15.5 x 10.7 x 5.5
Double Unit: 392 x 272 x 189 | 15.5 x 10.7 x 7.4
318
Dual-Band Combiner
1710 – 1880 MHz 1920 – 2200 MHz

1710 - 1880 1920 - 2200 1710 - 1880 1920 - 2200

Unit 1 Unit 2
Technical Data
Type No. 78210626V43
Double Unit
Pass band
Band 1 (GSM 1800) MHz 1710 – 1880
Band 2 (UMTS) MHz 1920 – 2200
Insertion loss
Port 1 ↔ Port 3 dB < 0.3 (1710 – 1880 MHz)
Port 2 ↔ Port 3 dB < 0.3 (1920 – 2200 MHz)
Isolation
VSWR < 1.2 (1710 – 1880) / (1920 – 2200 MHz)
Impedance Ω 50
Input power W
Band 1 / Band 2 < 300 / < 300
Intermodulation dBc < –160 (3rd order; with 2 x 20 W)
products
Temperature range °C –40 ... +60
Port 1 ↔ Port 3 By-pass (max. 2500 mA) Stop
Port 2 ↔ Port 3 Stop By-pass (max. 2500 mA)
Dimensions (w x h x d) mm | in 163.5 x 195.3 x 102 | 6.4 x7.7 x 4.0
319
Dual-Band Combiner
1710 – 1880 MHz 1920 – 2200 MHz

double unit
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 1710 – 1880
Band 2 MHz 1920 – 2200
Insertion loss
Port 1 ↔ Port 3 dB < 0.3 (1710 – 1880 MHz)
Port 2 ↔ Port 3 dB < 0.3 (1920 – 2200 MHz)
Isolation
VSWR < 1.2
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300 / < 300
Mounting mm | in Wall mounting: With 4 screws (max. 8 | 0.315 diameter) / Mast mounting: With additional clamp set
Grounding M8 stud
320
Dual-Band Combiner
1427 – 1880 MHz 1920 – 2690 MHz

double unit
Technical Data
Type No. 78211620 78211622 78211624

78211621 78211623 78211625
Pass band
Band 1 (GSM 1800) MHz 1427 – 1880
Band 2 (UMTS) MHz 1920 – 2690
Insertion loss
Port 1 ↔ Port 3 dB < 0.3 (1427 – 1880)
Port 2 ↔ Port 3 dB < 0.35 (1920 – 2690)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200
Temperature range °C | °F −40 ... +60 / −40 ... +140
Weight kg | lb Single unit: Approx. 3.4 | 7.5
Double unit: Approx. 6.7 | 14.8
Dimensions (w x h x d) mm | in Single unit: Approx. 251 x 211 x 68 | 9.9 x 8.3 x 2.7
Double unit: Approx. 251 x 211 x 139 | 9.9 x 8.3 x 5.5
Packing size mm | in Single unit: 439 x 289 x 160 | 17.3 x 11.4 x 6.3
Double unit: 439 x 289 x 230 | 17.3 x 11.4 x 9.1
321
Dual-Band Combiner
1427 – 1880 MHz 1920 – 2690 MHz

Unit 2
Double Unit

Type No. 78211626
Double Unit
Pass band
Band 1 MHz 1427 – 1880
Band 2 MHz 1920 – 2690
Insertion loss
Port 1 ↔ Port 3 dB < 0.3 (1427 – 1880 MHz)
Port 2 ↔ Port 3 dB < 0.35 (1920 – 2690 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Mounting mm | in Wall mounting: With 4 screws (max. 8 | 0.315 diameter) / Mast mounting: With clamp set
322
Dual-Band Combiner
1427 – 1880 MHz 1920 – 2690 MHz

In combine mode, the auto-sense combiner has the Port 1
1. First In - First Out Function Port 2
3. Exclusive User Function Single Unit Double Unit
Port 3
double unit
• Built-in lightning protection Port 1 Port 2
1427 – 1880 1920 – 2690
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 1427 – 1880
Band 2 MHz 1920 – 2690
Insertion loss
Port 1 ↔ Port 4 dB < 0.3 (1427 – 1880 MHz) typ. 0.2 dB
Port 2 ↔ Port 4 dB < 0.35 (1920 – 2690 MHz) typ. 0.2 dB
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Port 1, 2 ↔ Port 3 mA Auto-sense (max. 2000)
Weight kg | lb Single unit: 3.5 | 7.60 / Double unit: 6.8 | 15.0
Double Unit: 251 x 211 x 139 | 9.9 x 8.3 x 5.5
Double Unit: 439 x 289 x 230 | 17.3 x 11.4 x 9.1
323
Dual-Band Combiner
1427 – 1518 MHz 1710 – 2690 MHz

double unit
1427 - 1518 1710 - 2690 1427 - 1518 1710 - 2690 1427 - 1518 1710 - 2690
Technical Data
Type No. 78211530 78211532 78211534

ps ps
clam d clam d
78211531 inc l u de 78211533 inc l u de 78211535
Pass band
Band 1 MHz 1427 – 1518
Band 2 MHz 1710 – 2690
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (1427 – 1518)
Port 2 ↔ Port 3 dB < 0.3 (1710 – 2690)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 200
Temperature range °C | °F −40 ... +60 | -40 ... +140
Mounting Wall mounting: With 4 screws (max. 8 | 0.315 [mm | in] diameter)
Mast mounting: With included clamp set
Weight kg | lb Single unit : 3.2 | 7.1
Double unit: 6.3 | 13.9
Dimensions (w x h x d) mm | in Single unit: 190 x 176 x 77 | 7.5 x 7.0 x 3.0
Double unit: 190 x 176 x 161 | 7.5 x 7.0 x 6.3
Double unit: 375 x 245 x 245 | 14.8 x 9.7 x 9.7
324
Dual-Band Combiner
1427 – 1518 MHz 1710 – 2690 MHz

Unit 2
Double Unit
1427 - 1518 1710 - 2690 1427 - 1518 1710 - 2690

ps
Type No. 78211536 clam d
de
Double Unit incl u
Pass band
Band 1 MHz 1427 – 1518
Band 2 MHz 1710 – 2690
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (1427 – 1518 MHz)
Port 2 ↔ Port 3 dB < 0.3 (1710 – 2690 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 200
325
Dual-Band Combiner
1427 – 1518 MHz 1710 – 2690 MHz

double unit
• Built-in lightning protection 1427 - 1518 1710 - 2690
Technical Data
Type No.
ps
clam d
2. Priority Controlled Function 78211537V01 in c l u de 78211538V01
Unit Single Double
Pass band
Band 1 MHz 1427 – 1518
Band 2 MHz 1710 – 2690
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (1427 – 1518)
Port 2 ↔ Port 3] dB < 0.3 (1710 – 2690)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 200
rd
Temperature range °C | °F −40 ... +60 | -40 ... +140

Mounting mm | in Wall mounting: With 4 screws (max. 8 | 0.315 [mm | in] diameter)
Weight kg | lb Single unit : 3.2 | 7.1
Double unit: 190 x 176 x 161 | 7.5 x 7.0 x 6.3
Double unit: 375 x 245 x 245 | 14.8 x 9.7 x 9.7
326
Dual-Band Combiner
1710 – 2180 MHz 2400 – 2700 MHz

double unit
1710 – 2180 MHz 2400 – 2700 MHz 1710 – 2180 MHz 2400 – 2700 MHz 1710 – 2180 MHz 2400 – 2700 MHz
Technical Data
Type No. 78211830 78211832 78211834
78211831 78211833 78211835

Pass band
Band 1 MHz 1710 – 2180
Band 2 MHz 2400 – 2700
Insertion loss
Port 1 ↔ Port 3 dB < 0.15 (1710 – 2180 MHz)
Port 2 ↔ Port 3 dB < 0.15 (2400 – 2700 MHz)
Isolation dB > 60
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Double Unit: 192 x 172 x 139 | 7.56 x 6.77 x 5.47
Packing size (w x h x d) mm | in Single Unit: 392 x 272 x 155 | 15.43 x 10.71 x 6.10
Double Unit: 392 x 272 x 220 | 15.43 x 10.71 x 8.66
327
Dual-Band Combiner
1710 – 2180 MHz 2400 – 2700 MHz

Unit 2
Double Unit
1710 – 2180 MHz 2400 – 2700 MHz 1710 – 2180 MHz 2400 – 2700 MHz
Type No. 78211836
Double Unit
Pass band
Band 1 MHz 1710 – 2180
Band 2 MHz 2400 – 2700
Insertion loss
Port 1 ↔ Port 3 dB < 0.15 (1710 – 2180 MHz)
Port 2 ↔ Port 3 dB < 0.15 (2400 – 2700 MHz)
Isolation dB > 60
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
328
Dual-Band Combiner
1710 – 2180 MHz 2400 – 2700 MHz

double unit
1710 - 2180 2400 - 2700
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 1710 – 2180
Band 2 MHz 2400 – 2700
Insertion loss
Port 1 ↔ Port 3 dB < 0.15 (1710 – 2180 MHz)
Port 2 ↔ Port 3 dB < 0.15 (2400 – 2700 MHz)
Isolation dB > 60
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Dimensions mm | in Single Unit: 192 x 172 x 68 | 7.56 x 6.77 x 2.68
Double Unit: 192 x 172 x 139 | 7.56 x 6.77 x 5.47
Double Unit: 392 x 272 x 220 | 15.43 x 10.71 x 8.66
329
Dual-Band Combiner
1427 – 2200 MHz 2300 – 2690 MHz

double unit
1427 – 2200 MHz 2300 – 2690 MHz 1427 – 2200 MHz 2300 – 2690 MHz 1427 – 2200 MHz 2300 – 2690 MHz
Technical Data
Type No. 78211790 78211792 78211794
78211791 78211793 78211795

Pass band
Band 1 MHz 1427 – 2200
Band 2 MHz 2300 – 2690
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (1427 – 2200 MHz)
Port 2 ↔ Port 3 dB < 0.2 (2300 – 2690 MHz)
Isolation dB > 50
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
rd

Double Unit: 192 x 172 x 139 | 7.56 x 6.77 x 5.47
Double Unit: 392 x 272 x 220 | 15.43 x 10.71 x 8.66
330
Dual-Band Combiner
1427 – 2200 MHz 2300 – 2690 MHz

Unit 2
Double Unit
1427 – 2200 MHz 2300 – 2690 MHz 1427 – 2200 MHz 2300 – 2690 MHz
Type No. 78211796
Double Unit
Pass band
Band 1 MHz 1427 – 2200
Band 2 MHz 2300 – 2690
Insertion loss
Port 1 ↔ Port 3 dB < 0.2 (1427 – 2200 MHz)
Port 2 ↔ Port 3 dB < 0.2 (2300 – 2690 MHz)
Isolation dB > 50
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
331
Dual-Band Combiner
1427 – 2200 MHz 2300 – 2690 MHz

double unit
1427 - 2200 2300 - 2690
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 1427 – 2200
Band 2 MHz 2300 – 2690
Insertion loss
Port 1 Port 3 dB < 0.2 (1427 – 2200 MHz)
Port 2 ↔ Port 3 dB < 0.2 (2300 – 2690 MHz)
Isolation dB > 50
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 W < 300
Dimensions mm | in Single Unit: 192 x 172 x 68 | 7.6 x 6.8 x 2.7
Double Unit: 192 x 172 x 139 | 7.6 x 6.8 x 5.5
Double Unit: 392 x 272 x 220 | 15.4 x 10.7 x 8.7
332
Dual-Band Combiner
1695 – 1780 / 2095 – 2200 MHz 1850 – 1920 / 1930 – 2000 MHz

Technical Data
Type No. 78210770 ps 78210771
clam d
Single unit l u de Double unit
inc
Pass band
Band 1 MHz 1695 – 1780 (Rx) / 2095 – 2200 (Tx)
Band 2 MHz 1850 – 1920 (Rx) / 1930 – 2000 (Tx)
Insertion loss
Port 1 ↔ Port 3 dB < 0.3 (1695 – 1780 / 2095 – 2200 MHz)
Port 2 ↔ Port 3 dB < 0.3 (1850 – 1920 / 1930 – 2000 MHz)
Isolation
VSWR < 1.25
Impedance Ω 50
Input power
Port 1 (AWS) W < 250
Port 2 (PCS) W < 250
Temperature range °C| F° −40 ... +60 | −40 ... +140
DC/AISG transparency mA By-pass between all ports (max. 2500)
Mounting mm | in Wall mounting: With 4 screws (max. 8 | 0.315 diameter) / Mast mounting: With additional clamp set
Dimensions (w x h x d) mm | in Single Unit: 244 x 184.5 x 46 | 9.61 x 7.26 x 1.81 / Double Unit: 244 x 184.5 x 96.5 | 9.61 x 7.26 x 3.80
333
Dual-Band Combiner
1695 – 1780 / 2095 – 2200 MHz 1850 – 1920 / 1930 – 2000 MHz

• Very low insertion loss Port 3
3. Exclusive User Function Port 1 Port 2
Split Mode (near antenna): AWS PCS
double unit
Technical Data
Type No. 78210778V01 clam d
ps
Double unit c l u de
in
Pass band
Band 1 MHz 1695 – 1780 (Rx) / 2095 – 2200 (Tx)
Band 2 MHz 1850 – 1920 (Rx) / 1930 – 2000 (Tx)
Insertion loss
Port 1 ↔ Port 3 dB < 0.3 (1695 – 1780 / 2095 – 2200 MHz)
Port 2 ↔ Port 3 dB < 0.3 (1850 – 1920 / 1930 – 2000 MHz)
Isolation
VSWR < 1.25
Impedance Ω 50
Input power per Band W < 250 (operational) / < 500 (survival)
DC supply V DC 7 – 30
Operating Current mA Typ. 6.5
Voltage drop V < 0.15
Mounting mm | in Wall mounting: With 4 screws (max. 8 | 0.315 diameter) / Mast mounting: With included clamp set
Weight kg | lb 6.1 | 13.45
334
703 – 788 MHz 791 – 862 MHz 880 – 960 MHz

double unit Single Unit Double Unit
Technical Data
Type No. 78210880 78210882 78210884

78210881 78210883 78210885
Pass band
Band 1 MHz 703 – 788
Band 2 MHz 791 – 862
Band 3 MHz 880 – 960
Insertion loss
Port 1 ↔ Port 4 dB < 0.5 (703 – 780) / < 1.0 (780 – 787) / < 1.5 (787 – 788)
Port 2 ↔ Port 4 dB < 1.5 (791 – 792) / < 1.0 (792 – 794) / < 0.5 (794 – 862)
Port 3 ↔ Port 4 dB < 0.5
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200
Connectors 4.3-10 female (long neck)
Port 3 ↔ Port 4 mA By-pass (max. 2500) Stop Stop
Mounting Wall mounting: With 4 screws (max. 8 | 0.315 [mm | in] diameter)
Weight kg | lb Single unit: 6 | 13.22 / Double unit: 11.9 | 26.24
Double Unit: 463 x 320 x 240 | 18.23 x 12.60 x 9.45
335
703 – 788 MHz 791 – 862 MHz 880 – 960 MHz

In split mode, the auto-sense combiner automatically Port 4

double unit
DC / AISG
Auto-Sense

Port 1 Port 2 Port 3
• Built-in lightning protection 703 - 788 791 - 862 880 - 960
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 703 – 788
Band 2 MHz 791 – 862
Band 3 MHz 880 – 960
Insertion loss
Port 1 ↔ Port 4 dB < 0.5 (703 – 780) / < 1.0 (780 – 787) / < 1.5 (787 – 788)
Port 2 ↔ Port 4 dB < 1.5 (791 – 792) / < 1.0 (792 – 794) / < 0.5 (794 – 862)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power W
Band 1 / Band 2 / Band 3 < 200 / < 200 / < 200
Port 1, 2, 3 ↔ Port 4 mA Auto-sense (max. 2000)
Mounting Wall mounting: With 4 screws (max. 8 mm | 0.315 in diameter)
Weight kg | lb Single Unit: 6 | 13.2 / Double Unit: 11 | 26.2
Double Unit: 300 x 260 x 175 | 11.8 x 10.2 x 6.9
Double Unit: 477 x 334 x 265 | 18.8 x 13.1 x 10.4
336
690 – 806 MHz 824 – 960 MHz 1427 – 3800 MHz

double unit
Technical Data
Type No. 78210700 78210702 78210704
Single Unit ps Single Unit ps Single Unit
clam d clam d
de de
78210701 inc l u 78210703 inc l u 78210705
Pass band
Band 1 MHz 690 – 806
Band 2 MHz 824 – 960
Band 3 MHz 1427 – 3800
Insertion loss
Port 3 ↔ Port 4 dB < 0.15 (1427 – 3800 MHz)
Isolation dB > 45
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200 (1427 – 2700 MHz); < 100 (2700 – 3800 MHz)
Weight kg | lb Single Unit: 5 | 11.0 / Double Unit: 9.9 | 21.8
Double Unit: 405 x 295 x 260 | 15.95 x 11.61 x 10.24
Dimensions (w x h x d) mm | in Single Unit: 222 x 222 x 86.5 | 8.7 x 8.7 x 3.4
Double Unit: 222 x 222 176 | 8.7 x 8.7 x 6.9
337
690 – 806 MHz 824 – 960 MHz 1427 – 3800 MHz

or stops the DC / AISG signal accordingly. Port 4

double unit
• Suitable for indoor and outdoor applications DC / AISG
Auto-Sense

• Built-in lightning protection Port 1 Port 2 Port 3
690 - 806 824 - 960 1427 - 3800
Technical Data
Type No.
ps
2. Priority Controlled Function 78210707V01 clam d
u de
78210708V01
in c l
Unit Single Double
Pass band
Band 1 MHz 690 – 806
Band 2 MHz 824 – 960
Band 3 MHz 1427 – 3800
Insertion loss
Port 3 ↔ Port 4 dB < 0.15 (1427 – 3800 MHz)
Isolation dB > 45
VSWR < 1.25
Impedance Ω 50
Input power
Double Unit: 222 x 222 x 176 | 8.7 x 8.7 x 6.9
Packing Size mm | in Single Unit: 405 x 295 x 170 | 16.0 x 11.6 x 6.7
Double Unit: 405 x 295 x 260 | 16.0 x 11.6 x 10.2
338
690 – 862 MHz 880 – 960 MHz 1427 – 3800 MHz

double unit
PortPort
4 4Port 4 PortPort
4 4Port 4 PortPort
4 4Port 4
PortPort
1 1Port
Port
1 Port
2 2Port
Port
2 Port
3 3Port 3 PortPort
1 1Port
Port
1 Port
2 2Port
Port
2 Port
3 3Port 3 PortPort
1 1Port
Port
1 Port
2 2Port
Port
2Port
3 3Port 3
Technical Data 690 –690
862– 862
690 880
– 862
–880
960– 960
8801427
– 960
1427
– 3800
– 1427
3800 – 3800 690 –690
862– 862
690 880
– 862
–880
960– 960
8801427
– 960
1427
– 3800
– 1427
3800 – 3800 690 –690
862– 862
690 880
– 862
–880
960– 960
880
1427
– 960
1427
– 3800
– 1427
3800 – 3800
Type No. 78211820 78211822 78211824

78211821 78211823 78211825

Pass band
Band 1 MHz 690 – 862
Band 2 MHz 880 – 960
Band 3 MHz 1427 – 3800
Insertion loss
Port 1 ↔ Port 4 dB < 0.35 (690 - 852 MHz); < 0.6 (852 - 862 MHz)
Port 3 ↔ Port 4 dB < 0.15 (1427 - 3800 MHz)
Isolation
Port 1 dB > 50 (880 - 960 MHz); > 90 (1427 - 3800 MHz)
Port 2 dB > 60 (690 - 862 MHz); > 90 (1427 - 3800 MHz)
Port 3 dB > 65 (690 - 862 MHz); > 60 (880 - 960 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Double Unit: 222 x 222 176 | 8.7 x 8.7 x 6.9
Double Unit: 405 x 295 x 260 | 16.0 x 11.6 x 10.2
339
690 – 862 MHz 880 – 960 MHz 1427 – 3800 MHz

double unit
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 690 – 862
Band 2 MHz 880 – 960
Band 3 MHz 1427 – 3800
Insertion loss
Port 3 ↔ Port 4 dB < 0.15 (1427 - 3800 MHz)
Isolation
Port 1 ↔ Port 2 dB > 55 (690 - 862 MHz); > 50 (880 - 960 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Port 1, 2, 3 ↔ Port4 mA Auto-sense (max. 2000)
Mounting Wall mounting: With 4 screws (max. 8 | 0.315 diameter) / Mast mounting: With clamp set
Dimensions (w x h x d) mm | in Single Unit: 222 x 222 x 86.5 | 8.7 x 8.7 x 3.4; Double Unit: 222 x 222 176 | 8.7 x 8.7 x 6.9
Packing size mm | in Single Unit: 405 x 295 x 170 | 16.0 x 11.6 x 6.7/ Double Unit: 405 x 295 x 260 | 16.0 x 11.6 x 10.3
340
703 – 788 MHz 791 – 960 MHz 1427 – 3800 MHz


Port 2
double unit Port 3
Technical Data
Type No. 78211490 78211492 78211494
78211491 78211493 78211495

Pass band
Band 1 MHz 703 – 788
Band 2 MHz 791 – 960
Band 3 MHz 1427 – 3800
Insertion loss
Port 3 ↔ Port 4 dB < 0.2 (1427 – 3800 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Intermodulation products dBc -160 (3rd order; with 2 x 20 W)
Temperature range °C | F° -40 ... +60 | -40 ... +140
Double unit: 258 x 301 x 178 | 10.2 x 11.9 x 7.0
Double unit: 477 x 334 x 265 | 18.8 x 13.1 x 10.4
341
703 – 788 MHz 791 – 960 MHz 1427 – 3800 MHz

ability to operate in three different functions: Port 2
detects connected Antenna Line Devices and bypasses Port 4
double unit
• Wall or mast mounting Port 1 Port 2 Port 3
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 703 – 788
Band 2 MHz 791 – 960
Band 3 MHz 1427 – 3800
Insertion loss
Port 3 ↔ Port 4 dB < 0.2 (1427 – 3800 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power W
Band 1 / Band 2 / Band 3 < 200 / < 200 / < 200 (1427 – 2700 MHz); < 100 (2700 – 3800 MHz)
Double Unit: 258 x 301 x 178 | 10.2 x 11.9 x 7.0
Double Unit: 477 x 334 x 265 | 18.8 x 13.1 x 10.4
342
380 – 960 MHz 1427 – 2200 MHz 2300 – 2690 MHz

double unit
Port 3

380-960 1427-2200 2300-2690 380-960 1427-2200 2300-2690

380-960 1427-2200 2300-2690
Technical Data
Type No. 78211450 78211452 78211454

clam d clam d
l u de l u de
78211451 i n c 78211453 i n c 78211455
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1427 – 2200
Band 3 MHz 2300 – 2690
Insertion loss
Port 1 ↔ Port 4 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 4 dB < 0.2 (1427 – 2200 MHz)
Port 3 ↔ Port 4 dB < 0.2 (2300 – 2690 MHz)
Isolation dB > 50
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200
Intermodulation products dBc < −160 (3rd order; with 2 x 20 W), excempt from TETRA 360 – 470 MHz: < −150
Double Unit: 215 x 197 x 139 | 8.5 x 7.8 x 5.5
(without connectors, inclusive mounting brackets)
Double Unit: 392 x 272 x 240 | 15.4 x 10.7 x 9.5
343
380 – 960 MHz 1427 – 2200 MHz 2300 – 2690 MHz

1. First In - First Out Function Port 3 Single Unit
3. Exclusive User Function Double Unit
double unit
• Built-in lightning protection 380-960 MHz 1427-2200 MHz 2300-2690 MHz
Technical Data
Type No.
DC/AISG transparency ps
clam d
l u de
1. First In - First Out Function 78211457 inc 78211458
Unit Single Double
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1427 – 2200
Band 3 MHz 2300 – 2690
Insertion loss
Port 1 ↔ Port 4 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 4 dB < 0.2 (1427 – 2200 MHz)
Port 3 ↔ Port 4 dB < 0.2 (2300 – 2690 MHz)
Isolation dB > 50
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 300 / < 200 / < 200
Intermodulation products dBc < −160 (3 order; with 2 x 20 W), excempt from TETRA 360 – 470 MHz: < -150
rd

Packing Size mm | in Single Unit: 392 x 272 x 165 | 15.4 x 10.7 x 6.5
Double Unit: 392 x 272 x 240 | 15.4 x 10.7 x 9.4
344
380 – 960 MHz 1427 – 1880 MHz 1920 – 2690 MHz

• Can be used as a combiner near the BTS or Port 4
• Wall or mast mounting Port 2
• Available as a single unit, or for
XPol antennas as a double unit Port 3

Technical Data
Type No. 78211560 78211562 78211564

78211561 78211563 78211565

Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1427 – 1880
MHz
Band 3 1920 – 2690
Insertion loss
Port 1 ↔ Port 4 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 4 dB < 0.3 (1427 – 1880 MHz)
Port 3 ↔ Port 4 dB < 0.35 (1920 – 2690 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200
Intermodulation products dBc < −160 (3 order; with 2 x 20 W), excempt from TETRA 360 − 470 MHz: < − 150
rd
< −160 (1427 – 2690 MHz, 3rd order; with 2 x 20 W)

Double Unit: 251 x 211 x 139 | 9.9 x 8.3 x 5.5
Double Unit: 439 x 289 x 230 | 17.3 x 11.4 x 9.1
345
380 – 960 MHz 1427 – 1880 MHz 1920 – 2690 MHz

double unit
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1427 – 1880
Band 3 MHz 1920 – 2690
Insertion loss
Port 1 ↔ Port 4 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 4 dB < 0.3 (1427 – 1880 MHz)
Port 3 ↔ Port 4 dB < 0.35 (1920 – 2690 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power W
Band 1 / Band 2 / Band 3 < 200 / < 200 / < 200
Intermodulation products dBc < −160 (3rd order; with 2 x 20 W), excempt from TETRA 360 − 470 MHz: < −150
Double Unit: 251 x 211 x 139 | 9.9 x 8.3 x 5.5
Double Unit: 439 x 289 x 230 | 17.3 x 11.4 x 9.1
346
380 – 960 MHz 1427 – 1518 MHz 1710 – 2690 MHz


double unit
Port 3

380-960 1427-1518 1710-2960 380-960 1427-1518 1710-2960 380-960 1427-1518 1710-2960
Technical Data
Type No. 78211570 78211572 78211574

clam d clam d
de de
78211571 inclu 78211573 inclu 78211575
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1427 – 1518
Band 3 MHz 1710 – 2690
Insertion loss
Port 1 ↔ Port 4 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 4 dB < 0.2 (1427 – 1518 MHz)
Port 3 ↔ Port 4 dB < 0.3 (1710 – 2690 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200

Double Unit: 190 x 176 x 161 | 7.5 x 6.9 x 6.3
Double Unit: 375 x 245 x 245 | 14.76 x 9.65 x 9.65
347
380 – 960 MHz 1427 - 1518 MHz 1710 – 2690 MHz

Split Mode (near antenna): Single Unit Double Unit
double unit
Technical Data
Type No.
ps
clam d
1. First In - First Out Function 78211577 inc l u de 78211578
Unit Single Double
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1427 – 1518
Band 3 MHz 1710 – 2690
Insertion loss
Port 1 ↔ Port 4 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 4 dB < 0.2 (1427 – 1518 MHz)
Port 3 ↔ Port 4 dB < 0.3 (1710 – 2690 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200
Double Unit: 190 x 176 x 161 | 7.5 x 6.9 x 6.3
Double Unit: 375 x 245 x 245 | 14.8 x 9.7 x 9.7
348
380 – 960 MHz 1695 – 1780 / 2095 – 2200 MHz 1850 – 1920 / 1930 – 2000 MHz

double unit
Technical Data
Type No. 78210780 ps
clam d 78210781
de
Single unit inclu Double unit
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1695 – 1780 (Rx) / 2095 – 2200 (Tx)
Band 3 MHz 1850 – 1920 (Rx) / 1930 – 2000 (Tx)
Insertion loss
Port 1 ↔ Port 4 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 4 dB < 0.3 (1695 – 1780 / 2095 – 2200 MHz)
Port 3 ↔ Port 4 dB < 0.3 (1850 – 1920 / 1930 – 2000 MHz)
Isolation
Port 1 ↔ Port 2 dB > 50 (380 – 960 / 1695 – 1780 / 2095 – 2200 MHz)
Port 1 ↔ Port 3 dB > 50 (380 – 960 / 1850 – 1920 / 1930 – 2000 MHz)
Port 2 ↔ Port 3 dB > 50 (1695 – 1780 / 1850 – 1920 / 1930 – 2000 / 2095 – 2200 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Port 1 W < 250
Port 2 (AWS) W < 250
Port 3 (PCS) W < 250
Intermodulation products dBc < –160 (3rd order; with 2 x 20 W), excempt from TETRA 360 – 470 MHz < –150 dBc
Temperature range °C | °F -40 ... +60 | -40 ... 140
DC/AISG transparency mA By-pass between all ports (max. 2500)
349
380 – 960 MHz 1695 – 1780 / 2095 – 2200 MHz 1850 – 1920 / 1930 – 2000 MHz

Double Unit
double unit
Technical Data
Type No. 78210788V01 clam d
ps
d e
Double unit inclu
Pass band
Band 1 MHz 380 – 960
Band 2 MHz 1695 – 1780 (Rx) / 2095 – 2200 (Tx)
Band 3 MHz 1850 – 1920 (Rx) / 1930 – 2000 (Tx)
Insertion loss
Port 1 ↔ Port 4 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 4 dB < 0.3 (1695 – 1780 / 2095 – 2200 MHz)
Port 3 ↔ Port 4 dB < 0.3 (1850 – 1920 / 1930 – 2000 MHz)
Isolation
Port 1 ↔ Port 2 dB > 50 (380 – 960 / 1695 – 1780 / 2095 – 2200 MHz)
Port 1 ↔ Port 3 dB > 50 (380 – 960 / 1850 – 1920 / 1930 – 2000 MHz)
Port 2 ↔ Port 3 dB > 50 (1695 – 1780 / 1850 – 1920 / 1930 – 2000 / 2095 – 2200 MHz)
VSWR < 1.25
Impedance Ω 50
Input power per Band W < 250 (operational) / < 500 (survival)
Temperature range °C | °F 40 ... +60 | −40 ... +140
350
1427 – 1518 MHz 1695 – 1880 MHz 1920 – 2690 MHz
• Can be used as a combiner near the BTS or in a Port4

Port1
• Designed for co-siting purposes Port2
• Available as a single unit, or for XPol antennas as Port3

double unit
1427 - 1518 1695 - 1880 1920 - 2690 1427 - 1518 1695 - 1880 1920 - 2690 1427 - 1518 1695 - 1880 1920 - 2690
Technical Data
Type No. 78211920 78211922 78211924
78211921 78211923 78211925
Pass band
Band 1 MHz 1427 – 1518
Band 2 MHz 1695 – 1880
Band 3 MHz 1920 – 2690
Insertion loss
Port 2 ↔ Port 4 dB < 0.3 (typ. 0.2 dB)
Isolation
Port 1 ↔ Port 2 dB > 40 (1427 – 1518 / 1695 – 1880 MHz)
Port 1 ↔ Port 3 dB > 45 (1427 – 1518 / 1920 – 2690 MHz)
Port 2 ↔ Port 3 dB > 45 (1695 – 1880 / 1920 – 2690 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200
Double unit: 190 x 176 x 167 | 7.5 x 6.9 x 6.6
351
1427 – 1518 MHz 1695 – 1880 MHz 1920 – 2690 MHz

• Enables feeder sharing Port4
AISG detection and bypass functionality. Port1
In combine mode, the auto-sense combiner has the Port2
Port3
double unit
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 1427 – 1518
Band 2 MHz 1695 – 1880
Band 3 MHz 1920 – 2690
Insertion loss
Isolation
Port 1 ↔ Port 2 dB > 40 (1427 – 1518 / 1695 – 1880 MHz)
Port 1 ↔ Port 3 dB > 45 (1427 – 1518 / 1920 – 2690 MHz)
Port 2 ↔ Port 3 dB > 45 (1695 – 1880 / 1920 – 2690 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200
352
1427 – 1518 MHz 1695 – 2200 MHz 2300 – 2690 MHz

Port4
Port1
double unit Port3

1427 - 1518 1695 - 2200 2300 - 2690 1427 - 1518 1695 - 2200 2300 - 2690 1427 - 1518 1695 - 2200 2300 - 2690
Technical Data
Type No. 78211930 78211932 78211934
78211931 78211933 78211935
Pass band
Band 1 (GSM/LTE1800) MHz 1427 – 1518
Band 2 (UMTS2100) MHz 1695 – 2200
Band 3 (2300 ... LTE2600) MHz 2300 – 2690
Insertion loss
Isolation
Port 1 ↔ Port 2 dB > 50 (1427 – 1518 / 1695 – 2200 MHz)
Port 1 ↔ Port 3 dB > 50 (1427 – 1518 / 2300 – 2690 MHz)
Port 2 ↔ Port 3 dB > 45 (1695 – 2200 / 2300 – 2690 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200
Double unit: 190 x 176 x 168 | 7.5 x 6.9 x 6.6
353
1427 – 1518 MHz 1695 – 2200 MHz 2300 – 2690 MHz

• Integrated auto-sense technology for automatic DC / Port1
1. First In - First Out Function Port3
double unit
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 1427 – 1518
Band 2 MHz 1695 – 2200
Band 3 MHz 2300 – 2690
Insertion loss
Isolation
Port 1 ↔ Port 2 dB > 50 (1427 – 1518 / 1695 – 2200 MHz)
Port 1 ↔ Port 3 dB > 50 (1427 – 1518 / 2300 – 2690 MHz)
Port 2 ↔ Port 3 dB > 45 (1695 – 2200 / 2300 – 2690 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200
Double unit: 190 x 176 x 168 | 7.5 x 6.9 x 6.6
354
1427 – 1880 MHz 1920 – 2360 MHz 2496 – 2690 MHz

reciprocal function near the antenna Port4
Port1
double unit Port3

1427 - 1880 1920 - 2360 2496 - 2690 1427 - 1880 1920 - 2360 2496 - 2690 1427 - 1880 1920 - 2360 2496 - 2690
Technical Data
Type No. 78211690 78211692 78211694
78211691 78211693 78211695
Pass band
Band 1 (GSM/LTE1800) MHz 1427 – 1880
Band 2 (UMTS2100) MHz 1920 – 2360
Band 3 (2300 ... LTE2600) MHz 2496 – 2690
Insertion loss
Isolation
Port 1 ↔ Port 2 dB > 45 (1427 – 1880 / 1920 – 2360 MHz)
Port 1 ↔ Port 3 dB > 45 (1427 – 1880 / 2496 – 2690 MHz)
Port 2 ↔ Port 3 dB > 45 (1920 – 2360 / 2496 – 2690 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 150 / < 150 / < 150
Double unit: 225 x 176 x 156 | 8.9 x 6.9 x 6.1
Double unit: 367 x 289 x 233 | 14.4 x 11.4 x 9.2
355
1427 – 1880 MHz 1920 – 2360 MHz 2496 – 2690 MHz
Unit 2
• Very low insertion loss Port4

• Suitable for indoor and outdoor applications Port2

Unit 1
• Wall or mast mounting Port3
• External DC stop available as an accessory Double Unit
1427 - 1880 1920 - 2360 2496 - 2690 1427 - 1880 1920 - 2360 2496 - 2690
Technical Data
Type No. 78211696
Double Unit
Pass band
Band 1 (GSM/LTE1800) MHz 1427 – 1880
Band 2 (UMTS2100) MHz 1920 – 2360
Band 3 (2300 ... LTE2600) MHz 2496 – 2690
Insertion loss
Isolation
Port 1 ↔ Port 2 dB > 45 (1427 – 1880 / 1920 – 2360 MHz)
Port 1 ↔ Port 3 dB > 45 (1427 – 1880 / 2496 – 2690 MHz)
Port 2 ↔ Port 3 dB > 45 (1920 – 2360 / 2496 – 2690 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 150 / < 150 / < 150
Port 2 ↔ Port 4 mA Stop Stop
356
1427 – 1880 MHz 1920 – 2360 MHz 2496 – 2690 MHz

AISG detection and bypass functionality. Port1

Port3
double unit
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 1427 – 1880
Band 2 MHz 1920 – 2360
Band 3 MHz 2496 – 2690
Insertion loss
Isolation
Port 1 ↔ Port 2 dB > 45 (1427 – 1880 / 1920 – 2360 MHz)
Port 1 ↔ Port 3 dB > 45 (1427 – 1880 / 2496 – 2690 MHz)
Port 2 ↔ Port 3 dB > 45 (1920 – 2360 / 2496 – 2690 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 150 / < 150 / < 150
357
1710 – 1880 MHz 1920 – 2170 MHz 2300 – 2700 MHz

reciprocal function near the antenna Port4

Port1
Port2
Port3
Technical Data
Type No. 78211400V43 78211402V43 78211404V43
78211401V43 78211403V43 78211405V43
Pass band
Band 1 MHz 1710 – 1880
Band 2 MHz 1920 – 2170
Band 3 MHz 2300 – 2700
Insertion loss
Port 1 ↔ Port 4 dB < 0.3 (typ. 0.1)
Port 2 ↔ Port 4 dB < 0.3 (typ. 0.1)
Port 3 ↔ Port 4 dB < 0.3 (typ. 0.1)
Isolation
Port 1 ↔ Port 2 dB > 50 (1710 – 1880 / 1920 – 2170 MHz)
Port 1 ↔ Port 3 dB > 50 (1710 – 1880 / 2300 – 2700 MHz)
Port 2 ↔ Port 3 dB > 50 (1920 – 2170 / 2300 – 2700 MHz)
VSWR < 1.25
Impedance Ω 50
Input power W
Band 1 / Band 2 / Band 3 < 200 / < 200 / < 200
Mounting Wall mounting: With 4 screws (max. diameter [mm | in] 8 | 0.315)
Weight kg | lb Single unit: 3.3 | 7.3
Double unit: 235 x 217 x 97 | 9.3 x 8.5 x 3.8
Double unit: 405 x 325 x 205 | 15.9 x 12.8 x 8.1
358
1710 – 1880 MHz 1920 – 2170 MHz 2300 – 2700 MHz

• Integrated auto-sense technology for automatic DC / Port1
1. First In - First Out Function Port3
double unit
Technical Data
Type No.
Unit Single Double
Pass band
Band 1 MHz 1710 – 1880
Band 2 MHz 1920 – 2170
Band 3 MHz 2300 – 2700
Insertion loss
Isolation
Port 1 ↔ Port 2 dB > 50 (1710 – 1880 / 1920 – 2170 MHz)
Port 1 ↔ Port 3 dB > 50 (1710 – 1880 / 2300 – 2700 MHz)
Port 2 ↔ Port 3 dB > 50 (1920 – 2170 / 2300 – 2700 MHz)
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 W < 200 / < 200 / < 200
359
Quad-Band Combiner
690 – 862 MHz 880 – 960 MHz 1427 – 1880 MHz 1920 – 2690 MHz

double unit
• Suitable for indoor and outdoor applications Single Unit
Double Unit
1427 1427
Technical Data
Type No. 78211340 78211342
Single Unit ps Single Unit
clam d
l u de
78211341 inc 78211343
Double Unit Double Unit
Pass band
Band 1 MHz 690 – 862
Band 2 MHz 880 – 960
Band 3 MHz 1427 – 1880
Band 4 MHz 1920 – 2690
Insertion loss
Port 1↔ Port 5 dB < 0.45, typ. 0.25 (690 – 862 MHz)
Port 2 ↔ Port 5 dB < 0.45, typ. 0.3 (880 – 960 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1 / Band 2 / Band 3 / Band 4 W < 200 / < 200 / < 200 / < 100
Port 1 ↔ Port 5] mA By-pass (max. 2500) Stop
Port 4 ↔ Port 5 mA By-pass (max. 2500) By-pass (max. 2500)
Mounting mm | in Wall mounting: With 4 screws (max. diameter 8 | 0.315) /
Double Unit: 358 x 271 x 172 | 14.1 x 10.7 x 6.8
Packing size mm | in Single Unit: 460x 440 x 177 | 18.1 x 17.3 x 7.0
Double Unit: 460 x 440 x 265 | 18.1 x 17.3 x 10.4
360
Quad-Band Combiner
690 – 862 MHz 880 – 960 MHz 1427 – 1880 MHz 1920 – 2690 MHz

3. Exclusive User Function 78211347 78211348
Split Mode (near antenna): Single Unit Double Unit
or stops the DC / AISG signal accordingly. Port 5

double unit DC / AISG

Auto-Sense
• Wall or mast mounting Port 1 Port 2 Port 3 Port 4

• Built-in lightning protection 690 - 862 880 - 960 1427 - 1880 1920 - 2690
Technical Data
Type No.
1. First In - First Out Function 78211347 ps
78211348
clam d
2. Priority Controlled Function 78211347V01 inc l u de 78211348V01
Unit Single Double
Pass band
Band 1 MHz 690 – 862
Band 2 MHz 880 – 960
Band 3 MHz 1427 – 1880
Band 4 MHz 1920 – 2690
Insertion loss
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Port 1, 2, 3, 4 ↔ Port 5 mA Auto-sense (max. 2000)
Mounting mm | in Wall mounting: With 4 screws (max. diameter 8 | 0.315)
361
Quad-Band Combiner
380 – 960 MHz 1427 – 1880 MHz 1920 – 2200 MHz 2300 – 2690 MHz
• Can be used as a combiner near the BTS or in a Port 5

Port 2
double unit Port 3 Port 4
• Suitable for indoor and outdoor applications Single Unit Double Unit
Technical Data
Type No. 78211580 78211582 78211584
78211581 78211583 78211585

Pass band
Band 1 (TETRA ... GSM 900) MHz 380 – 960
Band 2 (GSM 1800) MHz 1427 – 1880
Band 3 (UMTS) MHz 1920 – 2200
Band 4 (LTE 2600) MHz 2300 – 2690
Insertion loss
Port 1 ↔ Port 5 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 5 dB < 0.3 (1427 – 1880 MHz)
Port 3 ↔ Port 5 dB < 0.3 (1920 – 2200 MHz)
Port 4 ↔ Port 5 dB < 0.3 (2300 – 2690 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1/Band 2/Band 3/Band 4 W < 200 / < 200 / < 200 / < 100
Intermodulation products dBc < –160 (3rd order; with 2 x 20 W), excempt from TETRA 360 – 470 MHz: < –150
Mounting mm | in Wall mounting: With 4 screws (max.: 8 | 0.315 diameter) / Mast mounting: With clamp set
Double unit: 270 x 213 x 138 | 10.6 x 8.4 x 5.4
Double unit: 394 x 339 x 230 | 15.5 x 13.3 x 9.1
362
Quad-Band Combiner
380 – 960 MHz 1427 – 1880 MHz 1920 – 2200 MHz 2300 – 2690 MHz

Port 3 Port 4
double unit
Technical Data
Type No.
Unit Single Double
Pass band
Band 2 (GSM 1800) MHz 1427 – 1880
Band 3 (UMTS) MHz 1920 – 2200
Band 4 (LTE 2600) MHz 2300 – 2690
Insertion loss
Port 1 ↔ Port 5 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 5 dB < 0.3 (1427 – 1880 MHz)
Port 3 ↔ Port 5 dB < 0.3 (1920 – 2200 MHz)
Port 4 ↔ Port 5 dB < 0.3 (2300 – 2690 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Band 1/Band 2/Band 3/Band 4 W < 200 / < 200 / < 200 / < 100
Intermodulation products dBc < –160 (3 order; with 2 x 20 W), excempt from TETRA 360 – 470 MHz: < –150
rd

Port 1, 2, 3, 4 ↔ Port 5 Auto-sense (max. 2000)
Mounting mm | in Wall mounting: With 4 screws (max.: 8 | 0.315 diameter) / Mast mounting: With clamp set
Weight kg | lb Single unit: 4 | 8.8 / Double unit: 7.8 | 17.2
363
Quad-Band Combiner
380 – 960 MHz 1427 – 1880 MHz 1920 – 2200 MHz 2300 – 2690 MHz
• Can be used as a combiner near the BTS or in a Unit 2

• Available for XPol antennas as double unit
• Built-in lightning protection Unit 1
• External DC stop available as an accessory Port 5 Port 5
Port 1 Port 2 Port 3 Port 4 Port 1 Port 2 Port 3 Port 4

380–960 1427–1880 1920–2200 2300–2690 380–960 1427–1880 1920–2200 2300–2690
Technical Data
Type No. 78211589
Double Unit
Pass band
Band 2 (GSM 1800) MHz 1427 – 1880
Band 3 (UMTS) MHz 1920 – 2200
Band 4 (LTE 2600) MHz 2300 – 2690
Insertion loss
Port 1 ↔ Port 5 dB < 0.2 (380 – 960 MHz)
Port 2 ↔ Port 5 dB < 0.3 (1427 – 1880 MHz)
Port 3 ↔ Port 5 dB < 0.3 (1920 – 2200 MHz)
Port 4 ↔ Port 5 dB < 0.3 (2300 – 2690 MHz)
Isolation dB > 40
VSWR < 1.25
Impedance Ω 50
Input power
Intermodulation products dBc < –160 (3rd order; with 2 x 20 W),
except from TETRA 360 – 470 MHz: < –150
Mounting Wall mounting: With 4 screws (max. 8 mm diameter) / Mast mounting: With additional
clamp set
364
Band-Pass Filter
S
ame-Band Combiners Hybrid Combiner
and Hybrid Combiners 3 dB Couplers
Same-Band Combiner
Summary of Same-Band Combiner and
Hybrid Combiner Types
Description Type No. Frequency range Max. input power Connector Page
Band-Pass Filter 78211847 2575 – 2615 MH 40 W at each port 4.3-10 368

Hybrid Combiner 2:1 78210500 791 – 960 MHz 60 W at each port 7-16 369
Hybrid Combiner 2:1 78210507 698 – 2690 MHz 60 W at each port 4.3-10 371
Hybrid Combiner 16:4 78211144 698 – 960 MHz 50 W 7-16 372
1710 – 1880 MHz at each port
1920 – 2170 MHz
2500 – 2690 MHz
Hybrid Combiner 4:4 78210536 698 – 2690 MHz 150 W at each port 4.3-10 374
3-dB Coupler 78210524 698 – 2690 MHz 150 W at each port 7-16 375
3-dB Coupler 78210525 698 – 2690 MHz 150 W at each port 7-16 376, 377
3-dB Coupler 78210527 698 – 2690 MHz 150 W at each port 4.3-10 378
3-dB Coupler 793554 800 – 2200 MHz 300 W 7-16 379
Same-Band Combiner 78210936 880 – 960 MHz 100 W at each port 7-16 380, 381
Same-Band Combiner 78211228V01 2500 – 2690 MHz 100 W at each port 4.3-10 386
Same-Band Combiner 78211228V03 2500 – 2690 MHz 100 W at each port 4.3-10 387
New
Product
366
2019
Frequency / MHz
Type No.
600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800
Frequency Combinations
Band-Pass Filter
78211847 2575 - 2615
Hybrid Combiner
Hybrid Combiner Types
78210500, 2:1 (2 x 60 W) 791 - 960

78210506, 2:1 (2 x 150 W) 698 - 2690
78210507, 2:1 (2 x 60 W) 698 - 2690
78211144, 16:4 (16 x 50 W) 698 - 960 1710 - 1880 1920 - 2170 2500 - 2690
78210534, 4:4 (4 x 150 W) 698 - 2690
78210536, 4:4 (4 x 150 W) 698 - 2690
3 dB Couplers
78210524, 2:2 (2 x 150 W) 698 - 2690
78210525, 2:2 (2 x 150 W) 698 - 2690
Summary of Same-Band Combiner and
78210527, 2:2 (2 x 150 W) 698 - 2690

793554, 2:2 800 - 2200
Same-Band Combiner
78210936 880 - 960
78211230 1710 - 1880
78211235 1730 - 1880
79211228V01 2500 - 2690
78211228V03 2500 - 2690
367
Band-pass Filter B 38
2575 - 2615 MHz
• Band-pass Filter for Band 38 with Band 7 Suppression

Technical Data
Type No. 78211847
Double Unit
Pass band MHz 2575 – 2615
Insertion loss dB < 1.4 (2575 – 2577 / 2613 – 2615 MHz)
dB <1.1 (2577 – 2580/ 2610 – 2613 MHz)
dB < 0.9 (2580 – 2610 MHz)
Stop band attenuation dB > 50 (< 2535 / > 2655 MHz)
dB > 40 (2535 – 2555 / 2635 – 2655 MHz)
> 35 (2555 – 2570/ 2620 – 2635 MHz)
dB
VSWR < 1.25 (2575 – 2615 MHz)
Impedance Ω 50
Input power per port W < 40
Connectors 4.3-10
Application Indoor or outdoor (IP66)
DC/AISG transparency mA By-pass (max. 2500)
Mounting Mast mounting: with additional clamp set
Number of input/output ports 4x Input (BTS), 4x Output (ANT)
368
Hybrid Combiner 2:1
791 − 960 MHz
2 x 60 W
• Designed for the decoupled combining of 2 transmitter
or receiver signals onto one common antenna
Port 3
• The frequency spacing between transmitter signals can
be as small as required
• Excellent intermodulation performance
Port 1
• DC by-pass between all ports Port 2
Technical Data
Type No. 78210500

Frequency range 791 - 960 MHz
Attenuation

Port 1 ↔ Port 3 3.1 ±0.5 dB
Port 2 ↔ Port 3 3.1 ±0.5 dB
Port 1 ↔ Port 2 > 23 dB*
VSWR < 1.15
Impedance 50 Ω
Input power
Port 1 60 W
Port 2 60 W
Intermodulation products < -160 dBc (3rd order; with 2 x 20 W)
Temperature range -40 ... +55 °C
DC/AISG transparency By-pass between all ports (max. 2500 mA)
AISG attenuation: 3 dB with external DC stop (see con-
figuration examples) / 6 dB without external DC stop
Mounting Wall mounting: With 4 screws (max. 6.5 mm diameter)
Weight 3.7 kg
Dimensions (w x h x d) 143.6 x 199 x 97.5 mm (without connectors)
* Valid if all ports are terminated with 50-Ohm loads.
Note:
The input power rating of 60 W per port is specified at an ambient temperature of
+55 °C with the combiner mounted vertically, without additional cooling, and while
respecting the safety standard EN IEC 60950 (max. surface temperature +90 °C).
If mounted vertically and/or used at a lower ambient temperature, then a higher input
power in accordance with the following table is possible:
Max. input power per port

Mounted horizontally Mounted vertically
Max. ambient
temperature
+55 °C 60 W 70 W
+40 °C 70 W 80 W
+25 °C 75 W 85 W
369
Hybrid Combiner 2 : 1
698 – 2690 MHz
2 x 150 W

Port 2
Port 3
Port 1
Technical Data
Type No. 78210506

Attenuation
Port 1 ↔ Port 3 dB 3 ±0.6
Port 1 ↔ Port 2 dB > 25*
VSWR (all ports) < 1.12 (698 – 2690 MHz)
Impedance Ω 50
Input power
Port 1 W < 150
Port 2 W < 150
Connectors 7-16 female
Port 2 ↔ Port 3 mA By-pass (max. 2500)
Mounting mm | in Wall mounting: With 4 screws (diameter max. 8 | 0.31) /
Weight kg | lb 8 | 17.6
Dimensions (w x h x d) mm | in 235 x 480 x 120 | 9.3x 18.9 x 4.7
Note:
Mounted horizon- Mounted vertically
The input power rating of 150 W is specified at an ambient tempera- tally
ture of +40 °C with the combiner mounted vertically, without additional
cooling, and while respecting the safety standard EN IEC 60950 (max.
surface temperature +90 °C).
The max. power rating increases or decreases with falling or rising am-
bient temperature and depending on horizontal or vertical mounting in Max. ambient
accordance with the following table: temperature
+55 °C 80 W 100 W
+40 °C 110 W 150 W
+25 °C 150 W 100 W
370
698 – 2690 MHz
2 x 60 W
• With 4.3-10 connectors
Port 3
• Excellent intermodulation performance Port 1
Port 2
Technical Data
Type No. 78210507

Attenuation

Port 1 ↔ Port 3 dB 3.1 ±0.5
Port 2 ↔ Port 3 dB 3.1 ±0.5
Port 1 ↔ Port 2 dB > 23*
VSWR (all ports) < 1.2 (698 – 2170 MHz) / < 1.25 (2170 – 2690 MHz)
Impedance Ω 50
Input power
Port 1 W < 60
Port 2 W < 60
Port 1 ↔ Port 3 By-pass (max. 2500 mA)
Note:
The input power rating of 150 W is specified at an ambient temperature
of +40 °C with the combiner mounted vertically, without additional
cooling, and while respecting the safety standard EN IEC 60950 (max.
surface temperature +90 °C).
If used at a lower ambient temperature, then a higher input power in
accordance with the following table is possible:

Max. ambient
temperature
+55 °C 55 W 60 W
+40 °C 70 W 75 W
+25 °C 80 W 85 W
371
Hybrid Combiner System
16 : 4
• Point of Interface (POI) for coverage solutions

with passive Distributed Antenna Systems (DAS)
• Designed for the decoupled combining of 16
transmitter or receiver signals and distributing these
signals evenly onto 4 antenna outputs.
• External 50 Ohm loads available as an
accessory
Technical Data
Type No. 78211144

16 : 4
Frequency range
Band 1 MHz 698 – 960
Band 2 MHz 1710 – 1880
Band 3 MHz 1920 – 2170
Band 4 MHz 2500 – 2690
Power distribution loss
(excluding insertion loss) dB Typically 6.5
Input 1...8/12/16 ↔ Output 1...4
Insertion loss
dB Typically 6.5
Input 1...16 ↔ Output 1...4
Isolation between input ports
Same bands dB > 22 *)
Different bands dB > 50
VSWR (all ports) < 1.5
Impedance Ω 50
Input power at each input port W < 50
Application Indoor or Outdoor (IP 66)
Mounting Wall mounting: With 4 screws (max. 6 mm diameter) / 19“-drawer
Weight kg | lb 21.5 | 47.4
Packing size (w x h x d) mm | in 570 x 272 x 584 | 22.4 x 10.7 x 23.0
Dimensions (w x h x d) 19” drawer x
mm | in 187 x 374 | 7.4 x 14.7
* Valid if all ports are terminated with 50-Ohm loads
698-960 1920-2170 698-960 1920-2170 698-960 1920-2170 698-960 1920-2170

1710-1880 2500-2690 1710-1880 2500-2690 1710-1880 2500-2690 1710-1880 2500-2690
Note:
The use of fewer than 16 inputs or 4 outputs is possible. Any unused input ports have to be terminated with low-power 50-
Ohm loads (e.g. Kathrein type 78410367), unused output ports have to be terminated with high-power
50-Ohm loads (e.g. Kathrein low intermodulation type 78210475).
372
Hybrid Combiner 4:4
698 – 2690 MHz
4 x 150 W
• Designed for the decoupled combining of 4 transmitter Output 1
or receiver signals and distributing these signals equally
Output 2
onto 4 antenna outputs
• Suitable for indoor or outdoor applications Output 3
• DC/AISG By-pass Output 4

Input 1
Input 2
Technical Data Input 3
Type No. 78210534 Input 4

Insertion loss

Input 1...4 ↔ Output 1...4 0.35 ± 0.15 dB
Power distribution loss Typically 6.3 dB
(excluding insertion loss)
Input 1...4 ↔ Output 1...4 6 ± 0.75 dB
Isolation
Input 1...4 ↔ Input 1...4 > 20 dB*
Output 1...4 ↔ Output 1...4 > 20 dB*
VSWR (all ports) < 1.22 (698 - 2170 MHz)
< 1.4, typ. 1.2 (2170 - 2690 MHz)
Impedance 50 Ω
Input power < 150 W at each input port
DC/AISG transparency By-pass (max. 2500 mA) between
Input 1 ↔ Output 4 / Input 2 ↔ Output 2 /
Input 3 ↔ Output 3 / Input 4 ↔ Output 1
External DC stop available as an accessory
Mounting Wall mounting: With 4 screws (max. 8 mm
diameter)
Mast mounting: With mounting kit
Weight 4.5 kg
Dimensions (w x h x d) 376 x 65 x 224 mm
(with connectors and mounting feet)
Note:
The use of fewer than 4 inputs or outputs is possible. Any unused
input ports have to be terminated with low-power 50-Ohm loads
(e.g. Kathrein type 784 10367), unused output ports have to be
terminated with high-power 50-Ohm loads (e.g. Kathrein low-
intermodulation type 78210475).
373
Hybrid Combiner 4:4
698 – 2690 MHz
4 x 150 W
• Designed for the decoupled combining of 4 transmitter Output 1
or receiver signals and distributing these signals equally
Output 2
onto 4 antenna outputs
• Suitable for indoor or outdoor applications Output 3
• DC/AISG By-pass Output 4
Input 1
Input 2
Input 3
Input 4
Technical Data
Type No. 78210536

Frequency range MHz 698 - 2690
Insertion loss
Input 1...4 ↔ Output 1...4 dB 0.35 ± 0.15
Power distribution loss dB Typically 6.3B
(excluding insertion loss)
Input 1...4 ↔ Output 1...4 dB 6 ± 0.75
Isolation
Input 1...4 ↔ Input 1...4 dB > 20 *
Output 1...4 ↔ Output 1...4 dB > 20 *
VSWR (all ports) < 1.22 (698 - 2170 MHz)
< 1.4, typ. 1.2 (2170 - 2690 MHz)
Impedance Ω 50
Input power W < 150 at each input port
Temperature range °C | °F -40 ... +60 °C
DC/AISG transparency By-pass (max. 2500 mA) between
Input 1 ↔ Output 4 / Input 2 ↔ Output 2 /
Input 3 ↔ Output 3 / Input 4 ↔ Output 1
Mounting Wall mounting: With 4 screws
(max. 8 mm diameter)
(with connectors and mounting feet)
Note:
The use of fewer than 4 inputs or outputs is possible. Any unused input
ports have to be terminated with low-power 50-Ohm loads (e.g. Kathrein
type 784 10484), unused output ports have to be terminated with high-
power 50-Ohm loads (e.g. Kathrein low-intermodulation type 78210473).
374
3 dB Coupler
698 − 2690 MHz
Port 1
• Can be used for the decoupled combining of 2 transmitters onto
a common antenna with frequency spacing as narrow as desired
(3 dB loss) - see application example 1 Port 3
two antennas with frequency spacing as narrow as desired - see
application example 2
• Can be used as a decoupled 2-way splitter - see application
example 3
• DC/AISG by-pass
Port 4

Technical Data
Type No. 78210524

Attenuation
Port 1 ↔ Port 2 3.1 ±0.5 dB
Port 1 ↔ Port 3 3.1 ±0.5 dB
Port 2 ↔ Port 3 See diagram
Directivity > 20 dB
VSWR < 1.25
Impedance 50 Ω
Input power < 150 W at each input port
DC/AISG transparency By-pass between Port 1 ↔ Port 3 / Port 2 ↔ Port 4
(max. 2500 mA)
Mounting With 4 screws (max. 6.5 mm diameter)
Weight 1.5 kg
(without connectors and mounting feet)
Note:
VSWR and attenuation values only valid if all ports are terminated with 50-Ohm loads.
375
3 dB Coupler
698 – 2690 MHz
• Can be used for the decoupled combining of 2 transmitters onto a Port 3
common antenna with frequency spacing as narrow as desired
(3 dB loss) - see application example 1
two antennas with frequency spacing as narrow as desired - see Port 4
application example 2
• Can be used as a decoupled 2-way splitter - see application
example 3
• Can be used as a frequency-independant 90° phase shifter
(90° Hybrid)
Port 1
• DC/AISG by-pass Port 2
Technical Data
Type No. 78210525

Frequency range 698 – 2690 MHz Accessories (order separately)
Attenuation
Port 1 ↔ Port 3 3 ±0.5 dB
Port 1 ↔ Port 4 3 ±0.5 dB 78210850V01 DC stop
Port 1 ↔ Port 2 > 30 dB 78210475 50-Ohm load (150 W)
Directivity > 28 dB 78410367 50-Ohm load (1.5 W)
Return loss > 30 dB 78210526 Mounting kit
Impedance 50 Ω
Input power < 150 W at each input port DC stop 50-Ohm load 50-Ohm load
DC/AISG transparency By-pass between Port 1 ↔ Port 4 / Port 2 ↔ Port 3 Mounting kit
(max. 2500 mA)
Weight 0.7 kg
Note:
VSWR and attenuation values only valid if all ports are terminated with 50-Ohm-loads.
376
3 dB Coupler
698 – 2690 MHz
e.g. 150 W
78210475
377
3 dB Coupler
698 – 2690 MHz
• Can be used for the decoupled combining of 2 transmitters onto a
common antenna with frequency spacing as narrow as desired
(3 dB loss)
two antennas with frequency spacing as narrow as desired
• Can be used as a decoupled 2-way splitter
• Can be used as a frequency-independant 90° phase shifter
(90° Hybrid)
• DC/AISG by-pass
Technical Data
Type No. 78210527

Attenuation Accessories (order separately)
Port 1 ↔ Port 4 dB 3 ±0.5 Type No. Description
Port 1 ↔ Port 2 dB > 25 78211000 DC stop
Directivity dB > 23 78210473 50-Ohm load (80 W; 4.3-10
Return loss dB > 25 Connectors)
Impedance Ω 50 78210484 50-Ohm load (2 W)
Input power W < 150 at each input port 78210526 Mounting kit
Intermodulation dBc < -160 (3rd order; with 2 x 20 W)

products
Mounting kit
DC/AISG transparency By-pass between Port 1 ↔ Port 4 / Port 2 ↔ Port 3
(max. 2500 mA)
Note:
VSWR and attenuation values only valid if all ports are terminated with 50-Ohm-loads.
378
3 dB Coupler
Hybrid Combiner 2:2
800 − 2200 MHz
The 3-dB coupler can be used:
• as a decoupled power splitter with a ratio of 1:1,
• for the decoupled combining of two transmitters with frequency
spacing as narrow as desired (at 3 dB loss),
• for the decoupled combining of two receivers with frequency
spacing as narrow as desired,
• for the decoupled combining of two transmitter/receiver units,
whose integrated duplexers are within the same frequency
range,
• as a frequency-independent 90° phase shifter,
• as a combiner component.
Function:
The 3-dB coupler has four ports, two of which are decoupled from
each other. For example effective power entering into port 1 is
distributed into ports 2 and 3. Port 4 is decoupled and without

power if ports 2 and 3 are ideally matched. In practice an absorber
of suitable power at port 4 is to be planned in accordance with the
mismatch of ports 2 and 3.
Decoupled combining can be achieved via the diagonally opposite
ports 2 and 3 or 1 and 4.
Technical Data
Type No. 793554

Attenuation 1 ↔ 2 / ↔ 3 3 ±1.2 dB (see diagram I)
Attenuation 2 ↔ 3 See diagram II
Directivity > 20 dB
VSWR < 1.2
Impedance 50 Ω
Input power < 300 W total power at two inputs,
with max. 200 W at one input
Intermodulation products <-160 dBc (3rd order; with 2 x 20 W)
Application Indoor and outdoor (IP66)
Mounting With 2 screws (max. 5.5 mm diameter)
Weight 1.3 kg
Dimensions (w x h x d) 104.9 x 50.2 x 93.9 mm (including connectors)
379
Same-Band Combiner
880 − 890 / 925 − 935 MHz 902.5 − 915 / 947.5 − 960 MHz
• Enables antenna and feeder sharing for two base

stations in the same frequency band
Port 3
• Suitable for two operators with frequency allocations
within the same frequency band Port 2
• Very low Tx/Rx insertion loss compared to standard Port 6
hybrid combiners Port 4

• DC/AISG By-pass for DTMA supply Port 5
Port 1
Tuning Diagram
Technical Data
Type No. 78210936
Pass band
BTS 1 (GSM900 / Operator 1) Rx1/Rx2 = 880 - 890 MHz, Tx1/Tx2 = 925 - 935 MHz
BTS 2 (GSM900 / Operator 2) Rx3/Rx4 = 902.5 - 915 MHz, Tx3/Tx4 = 947.5 - 960 MHz
Insertion loss
Port 1 ↔ Port 3 / Port 4 ↔ Port 6 < 0.5 dB, typically 0.3 dB (880 - 890 MHz) / < 0.7 dB, typically 0.4 dB (925 - 935 MHz)
Port 2 ↔ Port 3 / Port 5 ↔ Port 6 < 0.7 dB, typically 0.5 dB (902.5 - 915 MHz) / < 0.5 dB, typically 0.3 dB (947.5 - 960 MHz)
Isolation
Port 1 ↔ Port 2 / Port 4 ↔ Port 5 > 30 dB (880 - 890 / 902.5 - 915 / 925 - 935 / 947.5 - 960 MHz)
VSWR < 1.2 (pass bands)
Impedance 50 Ω
Input power
Tx1 / Tx2 / Tx3 / Tx4 < 100 W / < 100 W / < 100 W / < 100 W
Port 1 ↔ Port 3 / Port 4 ↔ Port 6 Stop
Port 2 ↔ Port 3 / Port 5 ↔ Port 6 By-pass (max. 2500 mA)
Lightning protection 3 kA, 10/350 µs pulse
Weight 6.9 kg
Dimensions (w x h x d) 275 x 176 x 140 mm (without connectors, without mounting brackets)
380
Same-Band Combiner
880 − 890 / 925 − 935 MHz 902.5 − 915 / 947.5 − 960 MHz
Typical Attenuation Curves

BTS 1 (GSM 900)
Diagram I (Port 1 ↔ Port 3 / Port 4 ↔ Port 6) Diagram II (Port 1 ↔ Port 3 / Port 4 ↔ Port 6)
0 0
Attenuation/dB
Attenuation/dB
-5 -0.5
880 - 890 925 - 935
Rx1/Rx2 Tx1/Tx2
-10 -1.0
880 - 890 925 - 935
Rx1/Rx2 Tx1/Tx2
-15 -1.5
-20 -2.0
-25 -2.5
-30 -3.0
-35 -3.5
-40 -4.0
-45 -4.5
-50 -5.0

870 880 890 900 910 920 930 940 950 960 970 870 880 890 900 910 920 930 940 950 960 970
Frequency/MHz Frequency/MHz
BTS 2 (GSM 900)

Diagram III (Port 2 ↔ Port 3 / Port 5 ↔ Port 6) Diagram IV (Port 2 ↔ Port 3 / Port 5 ↔ Port 6)
0 0
Attenuation/dB
Attenuation/dB
-5 -0.5
-10 -1.0
902.5 - 915 947.5 - 960 902.5 - 915 947.5 - 960
Rx3/Rx4 Tx3/Tx4 Rx3/Rx4 Tx3/Tx4
-15 -1.5
-20 -2.0
-25 -2.5
-30 -3.0
-35 -3.5
-40 -4.0
-45 -4.5
-50 -5.0
870 880 890 900 910 920 930 940 950 960 970 870 880 890 900 910 920 930 940 950 960 970
Block Diagram
381
Same-Band Combiner
1710 – 1740 / 1805 – 1835 MHz 1755 – 1785 / 1850 – 1880 MHz

within the same frequency band
• Very low Tx/Rx insertion loss compared to standard
hybrid combiners
• DC/AISG by-pass for DTMA supply
Tuning Diagram
Technical Data
Type No. 78211230

Pass band
BTS 1 (LTE/GSM1800 / Operator 1) Rx1/Rx2 = 1710 – 1740 MHz, Tx1/Tx2 = 1805 – 1835 MHz
Insertion loss
Port 1 ↔ Port 3 / Port 4 ↔ Port 6 < 0.6 dB (1710 - 1740 MHz) / < 0.5 dB (1805 - 1835 MHz)
Port 2 ↔ Port 3 / Port 5 ↔ Port 6 < 0.5 dB (1755 - 1785 MHz) / < 0.6 dB (1850 - 1880 MHz)
Isolation
Port 1 ↔ Port 2 / Port 4 ↔ Port 5 > 30 dB (1710 - 1740 / 1755 - 1785 / 1805 - 1835 / 1850 - 1880 MHz)
Impedance 50 Ω
Input power Tx1 / Tx2 / Tx3 / Tx4 < 100 W / < 100 W / < 100 W / < 100 W
DC/AISG transparency (switchable)
clamp set
Weight 5.5 kg
Packing size (w x h x d) 367 x 307 x 185 mm
382
Same-Band Combiner
1710 – 1740 / 1805 – 1835 MHz 1755 – 1785 / 1850 – 1880 MHz

BTS 1 (LTE/GSM 1800)
Diagram I (Port 1 ↔ Port 3 / Port 4 ↔ Port 6) Diagram II (Port 1 ↔ Port 3 / Port 4 ↔ Port 6)

BTS 2 (LTE/GSM 1800)

Diagram III (Port 2 ↔ Port 3 / Port 5 ↔ 6) Diagram IV (Port 2 ↔ Port 3 / Port 5 ↔ Port 6)
Block Diagram
LTE / LTE /
GSM 1800 GSM 1800
383
Same-Band Combiner
1730 – 1750 / 1825 – 1845 MHz 1765 – 1785 / 1860 – 1880 MHz

within the same frequency band
• Very low Tx/Rx insertion loss compared to standard
hybrid combiners
Tuning Diagram
Technical Data
Type No. 78211235

Pass band
Insertion loss
Port 1 ↔ Port 3 / Port 4 ↔ Port 6 < 0.5 dB (1730 – 1750 MHz) / < 0.5 dB (1825 – 1845 MHz)
Port 2 ↔ Port 3 / Port 5 ↔ Port 6 < 0.5 dB (1765 – 1785 MHz) / < 0.5 dB (1860 – 1880 MHz)
Isolation
Port 1 ↔ Port 2 / Port 4 ↔ Port 5 > 30 dB (1730 – 1750 / 1765 – 1785 / 1825 – 1845 / 1860 – 1880 MHz)
Impedance 50 Ω
Input power Tx1 / Tx2 / Tx3 / Tx4 < 100 W / < 100 W / < 100 W / < 100 W
clamp set
Weight 5.5 kg
Packing size (w x h x d) 367 x 307 x 185 mm
384
Same-Band Combiner
1730 – 1750 / 1825 – 1845 MHz 1765 – 1785 / 1860 – 1880 MHz

Block Diagram
LTE / GSM 1800 LTE / GSM 1800
385
Same-Band Combiner
2500 – 2520 / 2620 – 2640 MHz 2580 - 2605 MHz
• Enables antenna and feeder sharing for two base stations in the same frequen-
cy band
• Low insertion loss over complete LTE 2600 / TDD 2600 bandwidth compared to
standard hybrid combiners
Tuning Diagram Block Diagram
TDD 1 TDD 2
BTS 2 (TDD 1, TDD 2)
BTS 1 (Rx1, Tx1, Rx2, Tx2)
TDD 1 TDD 2
Technical Data
Type No. 78211228V01

Pass band
BTS 1 (LTE 2600) MHz Rx = 2500 - 2520 / Tx = 2620 - 2640
BTS 2 (TDD 2600) MHz TDD = 2580 - 2605
Insertion loss
Port 1 ↔ Port 3 / Port 4 ↔ Port 6 dB < 1.1
Isolation
Port 1 ↔ Port 2 / Port 4 ↔ Port 5 dB > 35
Impedance Ω 50
Input power W < 100
Intermodulation products dBc rd
< −160 (3 order; with 2 x 20 W)
Port 1 ↔ Port 3 / Port 4 ↔ Port 6 mA By-pass (max. 2500)
Lightning protection kA 3, 10/350 μs pulse
Packing size mm | in 345 x 305 x 165 | 13.6 x 12 x 6.5
386
Same-Band Combiner
2500 – 2520 / 2620 – 2640 MHz 2540 – 2570 / 2660 – 2690 MHz
• Enables antenna and feeder sharing for two base stations in the same frequen-
cy band
• Low insertion loss over complete LTE 2600 bandwidth compared to standard
hybrid combiners
Tuning Diagram Block Diagram
Tx1 Tx3
Tx2 Tx4

Technical Data
Type No. 78211228V03

Pass band
BTS 1 (LTE 2600) MHz Rx = 2500 − 2520 / Tx = 2620 − 2640
BTS 2 (LTE 2600) MHz Rx = 2540 − 2570 / Tx = 2660 − 2690
Insertion loss
Isolation
Port 1 ↔ Port 2 / Port 4 ↔ Port 5 dB > 35
Impedance Ω 50
Input power Tx1 / Tx2 / Tx3 / Tx4 W < 100 / < 100 / < 100 / < 100
DC/AISG transparency (factory switchable)
Port 2 ↔ Port 3 / Port 5 ↔ Port 6 mA By-pass (max. 2500)
Packing size mm | in 345 x 305 x 165 | 13.9 x 12 x 6.5
387
388
Smart Bias Tees
DC-Stops
S
ystem Components Attenuators
and Accessories
50 Ω Loads
Clamp Sets
390
Summary of System Components
and Accessories
Description Type No. Frequency range Connector Type Max. input power Page
DC Stop 78210850V01 250 – 2700 MHz 7-16 750 W 392

DC Stop 78211000 250 – 3800 MHz 4.3-10 500 / 300 W 393
Smart Bias Tee 78211055 690 – 2700 MHz 7-16 750 W 394 - 396
Smart Bias Tee 78211592 690 – 2700 MHz 4.3-10 500 W 397 - 399
50 Ω Load 78210475 698 – 2700 MHz 7-16 female 150 W 400
50 Ω Load 78410367 0 – 4000 MHz 7-16 male 1.5 W 401
50 Ω Load 78210484 0 – 7500 MHz 4.3-10 male 2W 401
50 Ω Load 78210473 698 – 2700 MHz 4.3-10 female 80 W 402
50 Ω Load 78211760 690 – 5800 MHz 4.3-10 male 25 W 403
50 Ω Load 78211762 690 – 5800 MHz 4.3-10 male 50 W 403
Attenuator 3 dB 78210891 0 – 4000 MHz 4.3-10 15 W 404
Clamp Set 734360 405

Clamp Set 85010002 405
Clamp Set 85010003 405
391
DC Stop
250 − 2700 MHz
DC Stop is used in dual- or multi-band antenna

systems where one or more antenna systems
require a DC supply for an installed mast head
amplifier. The DC Stop prevents DC voltage from
being shorted within the non-biased antenna
system(s) and isolates the corresponding base
station output(s) from DC voltage.
• Low RF signal insertion loss

• High DC signal isolation from port 1 to port 2
and vice versa
• Isolation of AISG signals
Technical Data
Type No. 78210850V01

Insertion loss
Port 1 ↔ Port 2 dB < 0.1 (250 - 2700 MHz)
Isolation
Port 1 ↔ Port 2 DC Stop
dB > 23 (AISG 2.176 MHz) Port 2
VSWR < 1.5 (250 - 380 MHz)
< 1.25 (380 - 690 MHz)
< 1.1 (690 - 2700 MHz)
Impedance Ω 50
Input power W < 750 (250 - 2700 MHz)
Port 1
products
Connectors
Port 1 7-16 male
Port 2 7-16 female
Weight kg |lb 0.3 | 0.7
(including connectors and earthing
screw of 6 mm diameter)
392
DC Stop
250 − 3800 MHz
DC Stop is used in dual- or multi-band antenna Antenna Antenna div Antenna Antenna div
systems where one or more antenna systems 1800 MHz 1800 MHz 2600 MHz 2600 MHz
require a DC supply for an installed mast head
amplifier. The DC Stop prevents DC voltage from
being shorted within the non-biased antenna
system(s) and isolates the corresponding base
station output(s) from DC voltage.
• Low RF signal insertion loss

AISG-DTMA
• High DC signal isolation from port 1 to port 2 DC stop DC stop
78211000 78211000
and vice versa
• Isolation of AISG signals
• Suitable for indoor or outdoor applications Port 1 Port 2 Port 1 Port 2
Dual-Band Dual-Band
Combiner Combiner
1800 / 2600 1800 / 2600
Port 3 Port 3
Feeder cable
Feeder cable
Port 3 Port 3
Dual-Band Dual-Band
Combiner Combiner
1800 / 2600 1800 / 2600
Port 1 Port 2 Port 1 Port 2
DC/AISG
DC stop DC stop Bias Tee

78211000 78211000
Tx / Rx Tx / Rx Tx / Rx Tx / Rx
div div
BTS BTS
Technical Data 1800 MHz 2600 MHz

Type No. 78211000
Insertion loss
Isolation
Port 1 ↔ Port 2 dB DC Stop
> 23 (AISG 2.176 MHz)
VSWR < 1.5 (250 - 380 MHz)
< 1.25 (380 - 575 MHz) Port 2
< 1.1 (575 - 3700 MHz)
< 1.2 (3700 - 3800 MHz)
Impedance Ω 50
Port 1
Input power W < 500 (250 - 2700 MHz)
W < 300 (2700 - 3800 MHz)
products
Connectors
Port 1 4.3-10 male
Port 2 4.3-10 female
Dimensions (w x Ø) mm | in 79 x 29 | 3.1 x 1.1
(including connectors)
393
Smart Bias Tee
690 – 2700 MHz
78211056 78211055
Port 1 Port 1
Antenna BTS
Port 2 Port 2
Feeder Feeder
78211066 78211065
Port 2 Port 2
Feeder Feeder
Port 1
Port 1
BTS
Antenna
Technical Data
Type No. 78211055 78211056

+8 ... +32 VDC / BTS +8 ... +32 VDC / Antenna
Port 1: 7-16 male BTS Antenna
Port 2: 7-16 female Feeder Feeder
Type No. 78211065 78211066

Port 1: 7-16 female BTS Antenna
Port 2: 7-16 male Feeder Feeder

Insertion loss
Port 1 ↔ Port 2 dB < 0.1 (690 - 2700 MHz)
Isolation for DC and RCU signals
Port 1 ↔ Port DC/RCU dB > 70
Port 2 ↔ Port DC/RCU dB >0
VSWR < 1.1 (690 - 2700 MHz)
Impedance Ω 50
Input power
Port 1 or Port 2 W < 750 (690 - 2700 MHz)
Port DC/RCU A < 2.5 / +8 ... +32 VDC
Power consumption W Typically 0.6
Intermodulation products dBc < – 160 (3rd order; with 2 x 20 W)
Modem carrier frequency MHz 2.176
Dimensions (w x h x d) mm | in 81 x 81 x 46 | 3.2 x 3.2 x 1.8 (without connectors)
394
Smart Bias Tee
690 – 2700 MHz
The Smart Bias Tee combines the performance of a standard Bias Tee with the function of an additional modem (AISG
standard) in order to provide either DC voltage as well as remote control signals via an RF feeder cable to a TMA or RCU.
The Smart Bias Tee provides low RF signal insertion loss from port 1 to port 2 and vice versa.The measures taken to
protect against static discharge and lightning ensure a high level of reliability and operational safety.
• 78211055, 78211065:
+8 ... 32 VDC (DC on pin6) version for use near the BTS, in order to feed-in DC voltage and RCU control signals into a
feeder cable
• 78211056, 78211066:
+8 ... 32 VDC (DC on pin6) version for use near the antenna, in order to control an RCU (only required if no TMA is in
use)
Abbreviations:
RCU = Remote Control Unit for remote electrical control of antenna tilt
BTS = Base Transceiver Station
TMA = Tower Mounted Amplifier
AISG = Antenna Interface Standards Group
Port 1 = Port for BTS or for Antenna
Port 2 = Port for Feeder Cable
Port DC/RCU = Port for DC voltage and Remote Control Unit signals
Pin connections:
395
Smart Bias Tee
690 – 2700 MHz
78211055, -56, -65, -66
Block diagrams: Application Examples:
Port 1
(Antenna)
78211056
DTMA
Port 2 Port DC/RCU

(Feeder) (RCU)
Port 2 Port DC/RCU

(Feeder) (CCU)
78211055 78211055
Port 1
(BTS)
Port 1 Port DC/RCU

(Antenna) (RCU)
DTMA
78211066
Port 2
(Feeder)
Port 2
(Feeder)
78211065
78211065
Port 1 Port DC/RCU

(BTS) (CCU)
396
Smart Bias Tee
690 – 2700 MHz
78211593 78211592
Port 1 Port 1
Antenna BTS
Port 2
Feeder Port 2
Feeder
78211597 Port 2 78211596

Feeder Port 2
Feeder
Port 1
Antenna Port 1
BTS
Technical Data
Type No. 78211592 78211593

Port 1: 4.3-10 male BTS Antenna
Port 2: 4.3-10 female Feeder Feeder
Type No. 78211596 78211597

Port 1: 4.3-10 female BTS Antenna
Port 2: 4.3-10 male Feeder Feeder

Insertion loss
Port 1 ↔ Port 2 dB < 0.1 (690 - 2700 MHz)
Isolation for DC and RCU signals
Port 1 ↔ Port 2 dB > 70 (DC), > 40 dB 2.176 MHz (AISG signal)
Port 1 ↔ Port DC/RCU dB > 70
Port 2 ↔ Port DC/RCU dB >0
VSWR < 1.1 (690 - 2700 MHz)
Impedance Ω 50
Input power
Port 1 or Port 2 W < 500 (690 - 2700 MHz)
Port DC/RCU A < 2.5 / +8 ... +32 VDC
Power consumption W Typically 0.6
Intermodulation products dBc < – 160 (3rd order; with 2 x 20 W)
Modem carrier frequency MHz 2.176
Dimensions (w x h x d) mm | in 81 x 81 x 42 | 3.2 x 3.2 x 1.6 (without connectors)
397
Smart Bias Tee
690 – 2700 MHz
The Smart Bias Tee combines the performance of a standard Bias Tee with the function of an additional modem (AISG
standard) in order to provide either DC voltage as well as remote control signals via an RF feeder cable to a TMA or RCU.
The Smart Bias Tee provides low RF signal insertion loss from port 1 to port 2 and vice versa.The measures taken to
protect against static discharge and lightning ensure a high level of reliability and operational safety.
• 78211592, 78211596:
+8 ... 32 VDC (DC on pin6) version for use near the BTS, in order to feed-in DC voltage and RCU control signals into a
feeder cable
• 78211593, 78211597:
+8 ... 32 VDC (DC on pin6) version for use near the antenna, in order to control an RCU (only required if
no TMA is in use)
Abbreviations:
RCU = Remote Control Unit for remote electrical control of antenna tilt
BTS = Base Transceiver Station
TMA = Tower Mounted Amplifier
Port 1 = Port for BTS or for Antenna
Port 2 = Port for Feeder Cable
Port DC/RCU = Port for DC voltage and Remote Control Unit signals
Pin connections:
78211592 78211593
78211596 78211597
398
Smart Bias Tee
690 – 2700 MHz
Block diagrams: Application Examples:
Port 1
(Antenna)
78211593
Port 2 Port DC/RCU

(Feeder) (RCU)
Port 2 Port DC/RCU

(Feeder) (CCU)
78211592 78211592
Port 1
(BTS)
Port 1 Port DC/RCU

(Antenna) (RCU)

78211597
Port 2
(Feeder)
Port 2
(Feeder)
78211596
78211596
Port 1 Port DC/RCU

(BTS) (CCU)
399
50-Ohm Load
698 – 2700 MHz
150 W
• Designed as 50-Ohm termination wherever improved
intermodulation performance compared to standard
loads is required
• Built-in DC stop
Technical Data
Type No. 78210475

VSWR < 1.12
Impedance Ω 50
Input power W < 150
DC/AISG transparency Built-in DC stop
AISG: Attenuation up to 3 dB when used in a network
Mast mounting: With additional clamp set (see page 2)
Note:
The RF port connector should always point downwards if mounted outdoors.
The input power rating of 150 W is specified at an ambient temperature of +40 °C with the combiner
mounted vertically, without additional cooling, and while respecting the safety standard EN IEC 60950
(max. surface temperature +90 °C).
The max. power rating increases or decreases with falling or rising ambient temperature and depen-
ding on horizontal or vertical mounting in accordance with the following table:
Max. input power
Max. ambient
temperature
+55 °C 80 W 100 W
+40 °C 110 W 150 W
+25 °C 150 W 180 W
400
50-Ohm Load
0 ... 7500 MHz
1.5 ... 50 W
• Standard 50-Ohm terminations for small and medium power
• Suitable for terminating open ports on RF equipment for indoor
and/or outdoor applications
1.5 Watt *
Type No. 78410367

Connector 7-16 male
VSWR 0 - 2000 MHz < 1.10
2000 - 4000 MHz < 1.30
Weight g | lb 120 | 0.26
Dimensions mm | in 40 / 32 diameter | 1.6 / 1.3 diameter 78410367
Packing size mm | in Approx. 50 x 90 x 100 | 2.0 x 3.5 x 3.9
2.0 Watt *
Type No. 78210484

Connector 4.3-10 male
VSWR 0 - 1000 MHz < 1.07
1000 - 2500 MHz < 1.11
2500 - 7500 MHz < 1.20
Application Indoor or outdoor
Weight g | lb 70 | 0.15 78210484
Dimensions mm | in 30.5 / 26.7 diameter | 1.2 / 1.1 diameter
* Rated power at 40 °C ambient temperature. The max. power rating increases or decreases with falling or rising
ambient temperature.
401
50-Ohm Load
698 − 2700 MHz
80 W
• Designed as 50-Ohm termination wherever improved
intermodulation performance compared to standard loads
is required
RF Port
Technical Data
Type No. 78210473

VSWR < 1.12
Impedance Ω 50
Input power W < 80 (see table)
products
Connector 4.3-10 female
Mast mounting: With additional Clamp set
(see data sheet)
Dimensions (w x h x d) mm | in 143.6 x 216 x 79.2 | 5.7 x 8.5 x 3.1
(including connector)
Note:
The RF port connector should always point downwards if mounted outdoors.
The input power rating of 80 W is specified at an ambient temperature of

+40 °C with the combiner mounted vertically, without additional cooling, and
while respecting the safety standard EN IEC 60950 (max. surface temperature
+90 °C).
The max. power rating increases or decreases with falling or rising ambient
temperature and depending on horizontal or vertical mounting in accordance
with the following table:
Max. ambient
temperature
+55 °C 50 W 60 W
+40 °C 70 W 80W
+25 °C 90 W 100 W
402
50-Ohm Load
690 – 5800 MHz
25 W / 50 W
• Designed as 50-Ohm termination wherever

improved intermodulation performance
compared to standard loads is required
78211760, 78211761 78211762, 78211763
Type No. 78211760 78211761 78211762 78211763

VSWR < 1.2
Impedance Ω 50
Input power W 25 25 50 50
Intermodulation products dBc < –160 (3 rd
order; with 2 x 20 W)
Temperature range °C | °F –40 … +55 | –40 … +131
Connector 4.3-10 male 4.3-10 female 4.3-10 male 4.3-10 female
Weight kg | lb 1.0 | 2.2 1.2 | 2.6
Dimensions mm | in Ø 74 x 109 | 2.9 x 4.3 Ø 96 x 122 | 3.8 x 4.8
403
Attenuator
15 W
0 − 4000 MHz
Air-Cooled attenuator for medium power rating
• Signal attenuation for test, measuring or tuning purposes

• Good matching over large frequency range
• Closed metall housing, very stable and RF proof
• Free choise of mounting position due to convection-cooling
Technical Data
Type No. 78210891 78210892 78210893 78210894
Attenuation dB 3 ±0.3 6 ±0.3 10 ±0.3 20 ±0.3
Max. power W 15 15 15 15
Frequency range MHz 0 − 4000
VSWR < 1.15
Impdance Ω 50
Connectors 4.3 − 10
IP rating IP65
Application Outdoor
Weight g | lb 100 | 0.22
Dimensions (L x diameter) mm | in 61 x 40 | 2.4 x 1.6
404
Clamp sets
Type No. Clamp set suitable for mast diameter of
734360 34 - 60 mm
734361 60 - 80 mm
734362 80 - 100 mm
734363 100 - 120 mm
734364 120 - 140 mm
734365 45 - 125 mm
Clamps for ALDs with weight ≥ 10 kg
Type No. 731651 738546 85010002 85010003

Suitable for mast diameter 28–60 mm 42–115 mm 110–220 mm 210–380 mm
Antenna – mast distance F 25–28 mm 20–26 mm 47–55 mm 48–68 mm
Number of pieces 1 clamp 1 clamp 1 clamp 1 clamp
Material – Clamp Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel Hot-dip galvanized steel
– Screws Hot-dip galvanized steel/ Hot-dip galvanized steel/ Hot-dip galvanized steel/ Stainless steel/
Stainless steel Stainless steel Stainless steel Stainless steel
– Nuts Stainless steel Stainless steel Stainless steel Stainless steel
Weight 0.8 kg 1.1 kg 2.7 kg 4.8 kg
Nuts MA = G
A
E
I
C

F
B
Nuts M8 => MA = 12 Nm
∅D
K
H
Figure similar to 85010002
Type No. A B C D E F G H I K
731651 116 mm 40 mm 40 mm 28–60 mm 93 mm 25–28 mm 20 Nm 84 mm – 64 mm

405
406
DTMAs
DTMAs
407
DTMAs:
Connector
Description Type No. Frequency range type Gain Page
(female)
DTMA-700-12-AISG-CWA 78210872V01 UL: 698 - 716 / DL: 728 - 746 MHz 7-16 12 dB 413
DTMA-1900-AWS4-12-AISG-CWA 78210863V04 UL: 1695 - 1915 / DL: 1930 - 2200 MHz 4.3-10 12 dB 414, 415
DTMA-1900-AWS4-12-AISG-CWA 78210864V04 UL: 1695 - 1915 / DL: 1930 - 2200 MHz 4.3-10 12 dB 414, 415
DTMA-AWS4-12-AISG-CWA 78210877V01 UL: 1695 - 1780 / DL: 2095 - 2200 MHz 7-16 12 dB 416
DTMA-700-12-AISG-CWA 78211275V43 UL: 703 - 748 / DL: 758 - 803 MHz 4.3-10 12 dB 417
DTMA-800-12-AISG 78210430V43 UL: 832 - 862 / DL: 791 - 821 MHz 4.3-10 12 dB 418
DTMA-800-900-12-AISG-CWA 78210510V43 UL: 832 - 862 / DL: 791 - 821 MHz 4.3-10 12 dB 420, 421
UL: 880 - 915 / DL: 925 - 960 MHz
DTMA-800-900-12-AISG-CWA 78210511V43 UL: 832 - 862 / DL: 791 - 821 MHz 4.3-10 12 dB 420, 421
UL: 880 - 915 / DL: 925 - 960 MHz
DTMA-800-900-12-AISG 78210512V43 UL: 832 - 862 / DL: 791 - 821 MHz 4.3-10 12 dB 422, 423
78210512V44 UL: 880 - 915 / DL: 925 - 960 MHz
DTMA-800-900-12-AISG-D 78210517V43 UL: 832 - 862 / DL: 791 - 821 MHz 4.3-10 12 dB 424, 425
78210517V44 UL: 880 - 915 / DL: 925 - 960 MHz
DTMA-1800-UMTS-12-AISG-D 78210990V43 UL: 1710 - 1785 / DL: 1805 - 1880 MHz 4.3-10 12 dB 428, 429
78210990V44 UL: 1920 - 1980 / DL: 2110 - 2170 MHz
DTMA-1800-UMTS-BYPASS1500-12-AISG 78211107 UL: 1710 - 1785 / DL: 1805 - 1880 MHz 4.3-10 12 dB 430, 431
78211107V02 UL: 1920 - 1980 / DL: 2110 - 2170 MHz
DTMA-UMTS-12-AISG-CWA 78211245V43 UL: 1920 - 1980 / DL: 2110 - 2170 MHz 4.3-10 12 dB 432
DTMA-UMTS-2600-12-AISG-D 78211175 UL: 1920 - 1980 / DL: 2110 - 2170 MHz 4.3-10 12 dB 434, 435
78211175V02 UL: 2500 - 2570 / DL: 2620 - 2690 MHz
DTMA-UMTS-2600-12-AISG 78211176 UL: 1920 - 1980 / DL: 2110 - 2170 MHz 4.3-10 12 dB 436, 437
78211176V02 UL: 2500 - 2570 / DL: 2620 - 2690 MHz
DTMA-1800-2600-12-AISG 78211332 UL: 1710 - 1785 / DL: 1805 - 1880 MHz 4.3-10 12 dB 438, 439
78211332V02 UL: 2500 - 2570 / DL: 2620 - 2690 MHz
DTMA-1800-2600-12-AISG 78211333 UL: 1710 - 1785 / DL: 1805 - 1880 MHz 4.3-10 12 dB 438, 439
78211333V02 UL: 2500 - 2570 / DL: 2620 - 2690 MHz
DTMA-1800-2600-12-AISG-D 78211334 UL: 1710 - 1785 / DL: 1805 - 1880 MHz 4.3-10 12 dB 440, 441
78211334V02 UL: 2500 - 2570 / DL: 2620 - 2690 MHz
DTMA-1800-2600-12-AISG-D 78211335 UL: 1710 - 1785 / DL: 1805 - 1880 MHz 4.3-10 12 dB 440, 441
78211335V02 UL: 2500 - 2570 / DL: 2620 - 2690 MHz
DTMA-1800-2100-2600-BYP1500-12-AISG 78211587 UL: 1710 - 1785 / DL: 1805 - 1880 MHz 4.3-10 12 dB 442, 443
78211587V02 UL: 1920 - 1980 / DL: 2110 - 2170 MHz
UL: 2500 - 2570 / DL: 2620 - 2690 MHz
DTMA-1800-2100-2600-BYP1500-12-AISG-T 78211588 UL: 1710 - 1785 / DL: 1805 - 1880 MHz 4.3-10 12 dB 444, 445
78211588V02 UL: 1920 - 1980 / DL: 2110 - 2170 MHz
UL: 2500 - 2570 / DL: 2620 - 2690 MHz
DTMA-2100-2600-BYP1500-12-AISG 78211910 UL: 1920 - 1980 / DL: 2110 - 2170 MHz 4.3-10 12 dB 446, 447
78211910V02 UL: 2500 - 2570 / DL: 2620 - 2690 MHz
DTMA-1800-2600-BYP1500-12-AISG 78211912 UL: 1710 - 1785 / DL: 1805 - 1880 MHz 4.3-10 12 dB 448, 449
78211912V02 UL: 2500 - 2570 / DL: 2620 - 2690 MHz
New Product UL = Uplink / DL = Downlink
408
Lower 700 APT 700 DD 800 GSM 900 DCS 1800 AWS4 ePCS 1900 UMTS 2100 LTE 2600
Frequency / Band
(B12) (B28) (B20) (B8) (B3) (B66) (B25) (B1) (B7)
AISG*
Low CWA
High CWA
AISG*
Low CWA
High CWA
AISG*
Low CWA
High CWA
AISG*
Low CWA
High CWA
AISG*
Low CWA
High CWA
AISG*
Low CWA
High CWA
AISG*
Low CWA
High CWA
AISG*
Low CWA
High CWA
AISG*
Low CWA
High CWA
Connector Type
Housing Style
2 Antenna Outputs
4 Antenna Outputs
6 Antenna Outputs
RF-Bypass
RF-Bypass
RF-Bypass
RF-Bypass
RF-Bypass
RF-Bypass
RF-Bypass
RF-Bypass
RF-Bypass
Type No.
78210872V01 7-16 SU ● ● ●
78210863V04 4.3-10 SU ● ● ● ● ●
Summary of DTMA Types
78210864V04 4.3-10 DU ● ● ● ● ●
78210877V01 7-16 SU ● ● ●
78211275V43 4.3-10 SU ● ● ●
78210430V43 4.3-10 SU ● ●
78210510V43 4.3-10 SU ● ● ● ● ●
78210511V43 4.3-10 SU ● ● ● ● ●
78210512V43/V44 4.3-10 SU ● ● ●
78210517V43/V44 4.3-10 SU ● ● ●
78210495V43 4.3-10 SU ● ● ●
78210581V43 4.3-10 SU ● ●
78210583V43 4.3-10 SU ● ● ●
Frequency Combinations and Alarming overview
78210990V43/V44 4.3-10 SU ● ● ●
78211107/V02 4.3-10 SU ● ● ● ● ●
78211245V43 4.3-10 SU ● ● ●
78211175/V02 4.3-10 SU ● ● ●
78211176/V02 4.3-10 SU ● ● ●
78211332/V02 4.3-10 SU ● ● ●
78211333/V02 4.3-10 DU ● ● ●
78211334/V02 4.3-10 SU ● ● ●
78211335/V02 4.3-10 DU ● ● ●
78211330V43 4.3-10 SU ● ●
78210587/V02 4.3-10 SU ● ● ● ● ● ● ●
78210588/V02 4.3-10 SU ● ● ● ● ●
78211910/V02 4.3-10 SU ● ● ● ● ●
78211912/V02 4.3-10 SU ● ● ● ● ●
● = default
* = AISG2.0 (default) & AISG1.1 (optional)
Low CWA (Current Window Alarm) = 170 - 200mA; High CWA (Current Window Alarm) = 230 - 295mA
SU = Single Unit; DU = Double Unit
409
DTMAs
DTMA Modes
DTMA Modes
The communication between the base station (BTS) and the DTMA can vary depending on the BTS. To meet the
customers’ needs, Kathrein has incorporated different communication modes in the DTMAs. These modes are only of
relevance if multi-band DTMAs are used (i.e. more than one band is amplified within one DTMA).
The correct mode of the DTMA needs to be selected based on the according BTS addressing behavior.
The modes can also be switched by inserting a vendor specific switching command into the AISG additional data field
“Installation Date” via a software download file provided by Kathrein. For further information, please contact your local
Kathrein support.
Existing Modes:
1. Single Band Mode

• In case the DTMA functionality is controlled by the BTS separately (i.e. each BTS controls one band)
• The DTMA behaves as two single TMAs, each BTS has the control over one TMA (2 AISG signal and DC paths)
• There is one address per band
2. Wide Band Mode

• In case one BTS controls the overall DTMA functionality
• There is one address for the complete DTMA
• In case a DTMA has 2 RET Ports, the information in both ports is redundant, meaning during the DTMA commissio-
ning the installer can connect the RET cable on any of the ports.
3. Multi Mode
• In case one BTS controls the overall DTMA functionality
• There is one address per band
Adressing of a Dual Band DTMA, example 78210517V43 (Dual Band DTMA for 800 + 900 MHz)
1. Single Band Mode
BTS 1 (800) BTS 2 (900)
AISG control x
Address Serial Number + “_0.8” Serial Number + “_0.9”
2. Wide Band Mode
BTS 1 (800) BTS 2 (900)

AISG control x
Address Serial Number + “_WBM_1”
OR
AISG control x
3. Multi Mode
BTS 1 (800) BTS 2 (900)

AISG control x
(1) Serial Number + “_0.8_1”
Address
OR
AISG control x
Address (1) Serial Number + “_0.8_2”
410
DTMA Modes
4-Port Antenna 4-Port Antenna 4-Port Antenna
RCU
RCU
RCU
RCU
RCU
RCU
RCU RCU RCU RCU RCU RCU
Ant 2 Ant 1 Ant 2 Ant 1 Ant 2 Ant 1 Ant 2 Ant 1 Ant 2 Ant 1 Ant 2 Ant 1
LTE 800 GSM 900 GSM 900 LTE 800 LTE 800 GSM 900 GSM 900 LTE 800 LTE 800 GSM 900 GSM 900 LTE 800
AISG 800 AISG 900 AISG 800 DTMA 78210517
AISG 900 AISG 800 DTMA 78210517
AISG 900
DTMA 78210517
BTS 1 BTS 2 BTS 1 BTS 2 BTS 1 BTS 2
OR
Feeder cable AISG 800 Feeder cable Feeder cable AISG 800
AISG 800 AISG 900 + +
AISG 900 AISG 900
Dual-Band Combiner Dual-Band Combiner Dual-Band Combiner

78210979 (Double Unit) 78210979 (Double Unit) 78210979 (Double Unit)
DC-stop DC-stop DC-stop DC-stop DC-stop DC-stop
AISG 800
+ AISG 800
AISG 800 AISG 900 +
AISG 900
AISG 900
MAIN/TX Main Div Div Main

MAIN/TX MAIN/TX Main Div Div Main
MAIN/TX MAIN/TX Main Div Div Main
MAIN/TX
800 BTS 800 BTS 900 900 800 BTS 800 BTS 900 900 800 BTS 800 BTS 900 900
AISG Control in Single Band Mode AISG control in Wide Band and Multi Mode
Adressing of a Triple Band DTMA, example 78210587 (Triple Band DTMA for 1800 + 2100 + 2600 MHz)
For one TMA only two addresses are available, therefore two frequency bands (1800 + 2100) are condensed.
1. Single Band Mode
BTS 1 (1800/2100) BTS 2 (2600)
AISG control x
Address Serial Number + “_1821” Serial Number + “_26”
2. Wide Band Mode
BTS 1 (1800/2100) BTS 2 (2600)

AISG control x
OR
AISG control x
3. Multi Mode
BTS 1 (1800/2100) BTS 2 (2600)

AISG control x
(1) Serial Number + “_1821_1
Address
(2) Serial Number + “_26_1
OR
DTMAs
AISG control x
Address (1) Serial Number + “_1821_2”
(2) Serial Number + “_26_2”
411
412
DTMA-700-12-AISG-CWA
Fullband Double Dual Duplex Tower Mounted Amplifier
(Masthead Amplifier)
• For lower SMH block A/B/C

• Double unit for easy use with XPol antennas
• Supports CWA, AISG 1.1 and AISG 2.0 (default)
• Suitable for antenna RET control according to AISG/3GPP standard
• Bypass mode to ensure cell operation in case of DC power down
• Low Inrush Current
• ATSC attenuation

RET = Remote Electrical Tilt
CWA = Current Window Alarm
Technical Data
ps
clam d
Type No. 78210872V01 in c l u de
Tx Characteristics
Insertion loss dB Typically 0.45
Input power (per input) kW < 0.2 (+53 dBm)/1.6 (+62 dBm) peak
Intermodulation products in Rx band dBm < –117 (2 Tx carriers at +43)
Return loss dB > 18
Rx Characteristics
Loss in bypass mode dB Typically 1.5 (DC OFF)
Return loss dB > 18 (DC ON) / > 16 (DC OFF)
Gain dB 12 nominal
Noise figure dB Typically 1.6
3rd order intercept point (OIP3) dBm Typically 25
ATSC attenuation dB > 30 (< 692 MHz)
Environmental Characteristics
Operating temperature range °C | −40 ... +65 | −40 ... +149
°F
IP rating IP67
MTBF hours > 1 000 000 (per TMA)
EMC According to ETS 300 342-3
DC and Alarm Characteristics CWA Mode AISG Mode
DC supply V DC 10 – 19 10 – 30
Operating current mA 90 – 130 Nom. 150 at 12 V
Alarm management mA 170 – 200 AISG
Mechanical Characteristics
Material Aluminium housing
Connectors RF 7-16 female (long neck)
AISG out 8-pin female, IEC 60130-9
(Pin 3: RS485B, pin 5: RS485A, pin 6: 9 – 30 V DC,
pin 7: DC return, other pins: Not connected)
DTMAs

Dimensions (w x h x d) mm 220 x 220 x 126 | 8.7 x 8.7 x 5
| in (without connectors, without mounting brackets)
413
DTMA-1900-AWS4-12-AISG-CWA

• Low Inrush Current
• Clamp Set 45 – 125 | 1.77 – 4.92 [mm | in] included

78210863V04
Technical Data 78210864V04
Type No. Single Unit 78210863V04

DTMA-1900-AWS4-12-AISG-CWA ps
clam d
de
Double Unit 78210864V04 inc l u
1900/AWS Tx Characteristics
Input power kW < 0.2 (+53 dBm) / 1.6 (+62 dBm) peak
(per input and frequency band)
Intermodulation products in Rx band dBm < -117 (2 Tx carriers at +43 dBm)
Return loss dB > 18
1900/AWS Rx Characteristics
Loss in bypass mode dB Typically 2.0
Gain dB 12 nominal
3rd order intercept point dBm Typically 25
Operating temperature range °C | °F -40 ... +65 | -40 ... 149
IP rating IP67
EMC FCC Part 15
414

DC supply V DC 10 – 19 10 – 30
Operating current mA 120 – 150 Nom. 170 at 12 V
ConnectorsRF 4.3-10 female
Weight kg | lb Single Unit: 7 | 16.1 / Double Unit: 15 | 32
Double Unit: 220 x 220 x 171 | 8.7 x 8.7 x 6.7
Block Diagram
DTMAs
415
DTMA-AWS4-12-AISG-CWA
• Compact line
• Double units for easy use with XPol antennas
• Supports CWA, AISG 1.1 and 2.0 (default)
• By-pass mode to ensure cell operation in case of DC power down
• Clamp Set 45 – 125 mm included
• Low weight AISG = Antenna Interface Standards Group
Technical Data
ps
clam d
l u de
78210877V01 inc
Type No.
DTMA-AWS4-12-AISG-CWA
Tx Characteristics
Input power (per input) kW < 0.1 (+50 dBm) CW / < 1.6 (+62 dBm) peak
Intermodulation products in Rx band dBm < -117 (2 Tx carriers at +43 dBm)
Return loss dB > 18
Rx Characteristics
Loss in by-pass mode dB Typically 2.0 (DC OFF)
Return loss dB > 18 (DC ON)
Gain dB 12 nominal
Operating temperature range °C | °F -40 ... +65 | -40 ... +149
IP rating IP67
DC supply V 7 – 19 10 – 30
Operating current mA Nom. 140 at 10 V
80 – 120
(without RET) Nom. 55 at 30 V
Connectors RF 7-16 female (long neck)
AISG 8-pin female, IEC 30130-9
Mounting mm | in Wall mounting: With 4 screws (max. 8 | 0.315
diameter) Mast mounting: With included clamp set
Dimensions (w x h x d) mm | in 138 x 191 x 71.6 | 5.4 x 7.5 x 2.8
416

• AISG setting switchable

Technical Data
78211275V43
Type No.
Tx Characteristics
Input power (per input) W < 100 (+50 dBm)
Intermodulation products in Rx dBm < −117 (2 Tx carriers at +43 dBm)
band
Return loss dB > 18
Rx Characteristics
Gain dB 12 nominal
DVB-T attenuation dB > 30 (< 698 MHz)
Operating temperature range °C | F −40 ... +65 | −40 ... +149
IP rating IP67*
DC supply V 9 – 19 9 – 30
Operating current per TMA mA 80 – 130 Nom. 150 at 12 V
Connectors RF 4.3-10 female
Mounting mm | in Wall mounting: With 4 screws (max. diameter 8 | 0.31)
DTMAs

417
DTMA-800-12-AISG
• Compact line
• Supports AISG 1.1 and 2.0 (default)

Technical Data
78210430V43
Type No.
DTMA-800-12-AISG
Tx Characteristics
Ripple dB < 0.3
Input power (per input) W < 100 (+50 dBm) CW
Intermodulation products in dBm < –117 (2 Tx carriers at +43 dBm)
RX band
Return loss dB > 18
Rx Characteristics
Loss in by-pass mode dB Typically 2.0
Gain dB 12 nominal
Operating temperature °C | °F –40 ... +65 | –40 ... +149
range
IP rating IP67*
DC and Alarm Characteristics
DC supply V 10 – 30
Operating current per DTMA mA Nom. 155 at 10 V
(without RET) mA Nom. 60 at 30 V
Alarm management AISG
RET 8-pin female, IEC 60130-9
(Pin 3: RS485B, pin 5: RS485A, pin 6: 10 - 30 V DC, pin 7: DC return,
other pins: Not connected)
418
• Compact line
• CWA and AISG configuration
Technical Data
78210495V43
Type No.
Tx Characteristics
Input power (per input) kW < 0.1 (+50 dBm) / < 1.6 (+62 dBm) peak
Intermodulation products in RX dBm < -117 (2 Tx carriers at +43 dBm)
band
Return loss dB > 18
Rx Characteristics
Frequency range MHz 880 - 915 MHz
Gain dB 12, nominal
IP rating IP67*
DC supply V DC 9 - 19 10 - 30
Operating current per DTMA mA 80 - 120 Nom. 155 at 10 V
Alarm management 170 - 200 mA AISG
(Pin 3: RS485B, pin 5: RS485A, pin 6: 10 - 30 V DC,
DTMAs

419
DTMA-800-900-12-AISG-CWA

• Supports CWA (configuration 1), Wide-Band (configuration 2 ... 5)
• DC supply via BTS1, BTS2 or both

Technical Data
CWA alarm 78210510V43
170 – 200 mA DTMA-800-900-12-AISG-CWA
Type No.
230 – 295 mA DTMA-800-900-12-AISG-CWA
800 MHz Tx Characteristics
Input power kW < 0.18 (+52.5 dBm) / < 1.6 (+62 dBm) peak
Intermodulation products in Rx dBm < –117 (2 Tx carriers at +43 dBm)
band
Return loss dB > 18
800 MHz Rx Characteristics
Gain dB 12 nominal
Intermodulation products in Rx band dBm < –117 (2 Tx carriers at +43 dBm)
Return loss dB > 18
Gain dB 12 nominal
Noise figure dBm Typically 1.5
420
DTMA-800-900-12-AISG-CWA
Operating temperature range °C | °F –40 ... +65 | –40 ... +149
IP rating IP 67*
DC supply V DC 9 – 19 9 – 31
Operating current (without RET) 80 – 120 mA Nom. 300 mA at 10 V
Nom. 100 mA at 30 V
Alarm management mA 78210510V01: 170 – 200 AISG
78210511V01: 230 – 295
Block Diagram
DTMAs
421
DTMA-800-900-12-AISG

• Supports AISG 1.1 and AISG 2.0 (default)
• Supports Wide-Band (configuration 1 ... 6) or Single-Band Mode
(configuration 7,8 or 9)

Technical Data
Type No. Single-Band Mode 78210512V43

Wide-Band Mode 78210512V44

Antenna
Intermodulation products in dBm < -117 (2 Tx carriers at +43)
RX band
Return loss dB > 18
RCU RCU
Loss in bypass mode dB Typically 2.0 Ant 1 Ant 2
Return loss dB > 18 (DC ON) / > 14 dB (DC OFF) Double TMA
Gain dB 12 nominal
Input power kW < 0.18 (+50 dBm) / < 1.6 (+62 dBm) peak
(per input and frequency band) Feeder cable
Intermodulation products in dBm < -117 (2 Tx carriers at +43)

RX band
Return loss dB > 18
Loss in bypass mode dB Typically 2.0 Dual-band Combiner
Double Unit
Return loss dB > 18 (DC ON) / > 14 (DC OFF) DC-stop DC-stop
Gain dB 12 nominal
3 order intercept point (OIP3)
rd
dBm Typically 25
Main Div Div Main
BTS 800 BTS 900
422
Operating temperature range °C |°F -40 ... +65 | -40 ... +149
IP rating IP67*
DC and Alarm Characteristics AISG Mode
DC supply V DC 9 - 31
Connectors RF 4.3 - 10 female
Block Diagram
DTMAs
423
DTMA-800-900-12-AISG-D
• Double unit for easy use with XXPol antennas

• Supports Multi-Band, Wide-Band (configuration 1 ... 6) and Single-
Band Mode (configuration 7, 8 or 9)
• DC supply via BTS 1, BTS 2 or both
• Low inrush current
• Auto-Select feature for Multi-Band and Wide-Band Mode

Technical Data

Wide-Band Mode 78210517V44 Antenna

LTE 800 GSM 900 GSM 900 LTE 800
800 MHz Tx Characteristics - - + +

Intermodulation products in RX band dBm < -116 (2 Tx carriers at +43) Ant 2
LTE 800
Ant 1
GSM 900
Ant 2
GSM 900
Ant 1
LTE 800
Double TMA 78210517

Return loss dB > 18
800 MHz Rx Characteristics BTS 1 BTS 2

Gain dB 12 nominal
3rd order intercept point (OIP3) dBm Typically 25 Feeder cable

Intermodulation products in RX band dBm < -116 (2 Tx carriers at +43)
Return loss dB > 18 Dual-band Combiner
Double Unit
900 MHz Rx Characteristics DC-stop DC-stop

Gain dB 12 nominal
Main Div Div Main
BTS 800 BTS 900

424
IP rating IP67
(max. 8 mm | 0.315 diameter)
Mast mounting: With additional clamps
Packing size mm | in 440 x 380 x 255 | 17.3 x 15 x 10
Block Diagram
DTMAs
425
DTMA-1800-12-AISG
• Compact line
Technical Data
78210581V43
Type No.
DTMA-1800-12-AISG
Tx Characteristics
Intermodulation products in dBm < -117 (2 Tx carriers at +43 dBm)
RX band
Return loss dB > 18
Rx Characteristics
Gain dB 12 nominal
3rd order intercept point dBm Typically 30
(OIP3)
Operating temperature °C | °F -40 ... +65 | -40 ... +149
range
IP rating IP67*
DC supply V 10 - 30
Operating current per DTMA Nom. 130 at 10 V
mA
426
• Compact line
• CWA and AISG configurations

Technical Data
Type No.
170-200 mA DTMA-1800-12-AISG-CWA
Tx Characteristics
Insertion loss dB Typically 0.25 dB
Rx band
Return loss dB > 18
Rx Characteristics
Gain dB 12 nominal
IP rating IP67*
DC and Alarm Characteristics CWA AISG Mode
DC supply V 7 - 19 10 - 30
Operating current Nom. 155 at 10 V
mA 80 - 120
Alarm management 170-200 mA AISG
DTMAs

427
DTMA-1800-UMTS-12-AISG-D
• Compact line
• Double units for easy use with XXPol antennas
• Supports Multi-Band, Wide Band (configuration 1 ... 6) and Single-Band
Mode (configuration 7, 8 or 9)
• DC Supply via BTS 0, BTS 1 or both
• Low inrush current

Technical Data


DTMA-1800-UMTS-12-AISG-D Double TMA 78210990V43
Tx Characteristics
Insertion loss dB Typically 0.5 Typically 0.3
Input power kW < 0.1 (+50 dBm)/< 1.6 kW (+62 dBm) peak
(per input and frequency
band)
Rx band
Return loss dB > 18
Rx Characteristics
Return loss dB > 16 (DC ON) / > 12
Loss in bypass mode dB Typically 2.3 (DC OFF) Double Unit
Gain dB nominal 12
rd
dBm Typically 30
BTS 1800 BTS UMTS
IP rating IP67
428

Alarm management AISG*
(max. 8 mm diameter) /
Mast mounting: With additional clamps
Block Diagram
Ant 0 Ant 1
Port 3 Port 4
DTMAs
429
DTMA-1800-UMTS-BYPASS1500-12-AISG

• Supports Multi-Band, Wide-Band (configuration 1 .. 6) or Single-Band Mode
(configuration 7, 8 or 9)
• DC Supply via BTS1, BTS2 or both

Technical Data
Type No. Single-Band Mode 78211107
Intermodulation products in RX band dBm < -117 (2 Tx carriers at +43 dBm)
Return loss dB > 18
Return loss db > 18 (DC ON) / > 12 (DC OFF)
Gain dB 12 nominal
Output 1-dB compression point dBm > 10
rd
dBm Typically 25
UMTS Tx Characteristics
Return loss dB > 18
UMTS Rx Characteristics
Gain dB 12 nominal
430
1427 - 1518 MHz Bypass Characteristics

Input power kW < 0.1 (+50 dBm)
Intermodulation products dBm < - 117 (2 Tx carriers at + 43 dBm)
Return loss dB > 18
IP rating IP67
Operating current per DTMA mA Nom. 175 @ 10 V
(without RET) mA Nom. 65 @ 30 V
Connectors RF 4.3-10 female, 8-pin female, IEC 60130-9, (Pin 3: RS485B,
AISG pin 5: RS485A, pin 6: 10 - 30 V DC, pin 7: DC return, other
pins: Not connected)
Mast mounting
Dimensions (w x h x d) mm | in 290 x 235 x 94 / 11.4 x 9.3 x 3.7
Packing size mm | in 420 x 335 x 175 / 16.5 x 13.2 x 6.9
Block Diagram
ANT1 ANT2
Lightning Lightning
Protection Protection
DCS+ DCS+
L-Band UMTS L-Band
UMTS
DC DC
µP1 µP2
1500 1800+ 1800+ 1500

2100 2100
Bias-T & DC + Bias-T &

DC + OOK RS485 DC + OOK
Lightning Lightning
DTMAs
BTS1 RET1 RET2 BTS2
431
DTMA-UMTS-12-AISG-CWA
• Compact line
• Supports CWA, AISG 1.1 and 2.0 (default)
• AISG setting switchable as described on page 2
• Low weight AISG = Antenna Interface Standards Group
Technical Data
Type No. 78211245V43

DTMA-UMTS-12-AISG-CWA
Tx Characteristics
Ripple dB < 0.1
RX band
Return loss dB > 18
Rx Characteristics
Loss in by-pass mode dB Typically 2.0 (DC OFF)
Gain dB Typically 12
IP rating IP67*
DC supply V 7 - 19 10 - 30
Operating current Nom. 130 at 10 V
mA 80 - 120
Alarm management 170 - 200 mA AISG*
432
DTMA-2600-12-AISG
• Compact line
• Low weight
Technical Data
Type No. 78211330V43

DTMA-2600-12-AISG
Tx Characteristics
Return loss dB > 18
Rx Characteristics
Loss in by-pass mode dB Typically 1.8
Gain dB 12, nominal
rd
dBm Typically 25
IP rating IP67*
DC supply V 10 - 30
Operating current per DTMA mA Nom. 130 at 10 V DC
(without RET) mA Nom. 50 at 30 V DC
pin 7: DC return, other pins: not connected)
DTMAs

433
DTMA-UMTS-2600-12-AISG-D
• Double unit for easy use with XXPol antennas

• Supports Multi-Band, Wide Band (configuration 1 ... 6) and Single-Band Mode

Technical Data


Tx Characteristics
Antenna
Frequency range MHz 2110 - 2170 2620 - 2690
Input power (per input and kW < 0.1 (+50 dBm) / < 1.6 (+62 dBm) peak
frequency band)
RX band
Return loss dB > 18
Rx Characteristics
Frequency range MHz 1920 - 1980 2500 – 2570
Loss in bypass mode dB Typically 1.5 Typically 1.8
Gain dB 12 nominal
Noise figure dB Typically 1.5 Typically 1.6
rd
dBm Typically 25
IP rating IP67
Lightning protection kA 3, 10/350 us pulse
Dual-band Combiner
DC and Alarm Characteristics AISG Mode Double Unit
DC supply V DC 10 - 30
DC-stop DC-stop

mA Nom. 100 at 30 V
BTS 2100 BTS 2600
434
(Pin 3: RS485B, pin 5: RS485A, pin 6: 10 - 30 V DC, pin 7:
DC return, other pins: Not connected)
Block Diagram
DTMAs
435
DTMA-UMTS-2600-12-AISG

• Supports Multi-Band, Wide Band (configuration 1 ... 6) and Single-
Band (Configuration 7,8 or 9)

Technical Data
Type No. Single-Band Mode

78211176
Wide-Band Mode
78211176V02
Tx Characteristics
Frequency range MHz 2110 - 2170 2620 - 2690
RX band
Return loss dB > 18
Rx Characteristics
Frequency range MHz 1920 - 1980 2500 – 2570
Loss in bypass mode dB Typically 1.5 Typically 1.8
Gain dB 12 nominal
Noise figure dB Typically 1.5 Typically 1.6
IP rating IP67
Lightning protection kA 3, 10/350 us pulse
DC supply V 10 - 30 DC
Nom. 100 at 30 V
436

Block Diagram
DTMAs
437
DTMA-1800-2600-12-AISG

• Stacked double units for use with 4 x 4 MIMO
• DC supply via BTS 1, BTS 2 or both

Technical Data
Type No.
Single Unit 78211332
Single-Band Mode DTMA-1800-2600-12-AISG
Single Unit 78211332V02

Wide-Band Mode DTMA-1800-2600-12-AISG ps
clam d
l u de
inc
Double Unit 78211333 Antenna
Single-Band Mode DTMA-1800-2600-12-AISG
Double Unit 78211333V02 1800 / 2600 1800 / 2600
Wide-Band Mode DTMA-1800-2600-12-AISG

RCU RCU
Insertion loss dB Typically 0.5 Ant 1 Ant 2
1800 / 2600 1800 / 2600
Input power kW < 0.1 (+50 dBm) / < 1.6 (+62 dBm) peak Double TMA 78211332
Intermodulation products in Rx band dBm < −117 (2 Tx carriers at +43)
1800 / 2600 1800 / 2600
Return loss dB > 18

Feeder cable
Gain dB 12 nominal
rd
dBm Typically 25
Dual-band Combiner
Insertion loss dB Typically 0.4 Double Unit
DC-stop DC-stop
Intermodulation products in Rx band dBm < −117 (2 Tx carriers at +43)
Return loss dB > 18
Main Div Div Main
BTS 1800 BTS 2600
438
DTMA-1800-2600-12-AISG
Gain dB 12 nominal
rd
dBm Typically 25
Operating temperature range °C | °F −40 ... +65 | −40 ... +149
IP rating IP67*
Operating current (without RET) mA Nom. 300 at 10 V
Nom. 100 at 30 V
Mounting mm | in Wall mounting: With 4 screws (diameter max. 8 | 0.315)
Weight kg | lb Single Unit: 6.5 | 14.3 / Double Unit: 13 | 28.7
Dimensions (w x h x d) mm | in Single Unit: 220 x 220 x 83 / 8.7 x 8.7 x 3.3
Double Unit: 220 x 220 x 170 / 8.7 x 8.7 x 6.7
Block Diagram
DTMAs
439
DTMA-1800-2600-12-AISG-D

• Stacked double units for use with 4x4 MIMO

RET = Remote Electrical Tilt Single Unit Double Unit
Technical Data
Type No.
Single Unit 78211334
Single-Band Mode DTMA-1800-2600-12-AISG-D
Single Unit 78211334V02

Wide-Band Mode DTMA-1800-2600-12-AISG-D
Antenna
Double Unit 78211335
Single-Band Mode DTMA-1800-2600-12-AISG-D
Double Unit 78211335V02

Wide-Band Mode DTMA-1800-2600-12-AISG-D
1800 MHz TxCharacteristics
Intermodulation products in Rx band dBm < -117 (2 Tx carriers at +43)
Return loss dB > 18
Gain dB 12 nominal
Output 1-dB compression band dBm > 10
rd
dBm Typically 25
Insertion loss dB Typically 0.4 Dual-band Combiner
Input power (per input and kW < 0.1 (+50 dBm) / < 1.6 (+62 dBm) peak Double Unit
frequency band) DC-stop DC-stop
Intermodulation products in Rx band dBm < -117 (2 Tx carriers at +43)

Return loss dB > 18
BTS 1800 BTS 2600
440
DTMA-1800-2600-12-AISG-D
Gain dB 12 nominal
Output 1-dB compression band dBm > 10
rd
dBm Typically 25
IP rating IP67
Nom. 100 at 30 V
Weight kg | lb Single Unit: 6.5 | 14.3 / Double Unit: 13 | 28.7
Double Unit: 220 x 220 x 170 | 8.7 x 8.7 x 6.7
Block Diagram
LTE 1800 LTE 2600 LTE 2600 LTE 1800

Ant 1 Ant 1 Ant 2 Ant 2
Port 1 Port 4 Port 3 Port 2
Lightning Lightning
DTMA
LNA
Supervision
and Alarm
Generation Unit
LNA
LNA LNA Supervision LNA LNA
and Alarm
Generation Unit
RS485-A
RS485-B
RS485-A
RS485-B
LTE 1800 LTE 2600 LTE 2600 LTE 1800
Bias Tee DC Power DC Power Bias Tee

& &
Lightning Lightning
Protection Modem Modem Protection
DTMAs
BTS 1 AISG Out 1 AISG Out 2 BTS 2
441
DTMA-1800-2100-2600-BYP1500-12-AISG

• Supports Multi-Band, Wide-Band (conf. 1 ... 6) and Single-Band (conf. 7, 8, 9)
• Auto-select feature for Multi-Band or Wide-Band mode

BYP = RF-BYPass
Technical Data
DTMA-1800-2100-2600-BYP1500-12-AISG
DTMA-1800-2100-2600-BYP1500-12-AISG
Input power kW < 0.1 (+ 50 dBm) | < 1.6 (+ 62 dBm) peak
Intermodulation products in Rx band dBm < - 117 (2 Tx carriers at + 43 dBm)
Return loss dB > 18
Return loss dB > 18 (DC ON) | > 12 (DC OFF)
Gain dB 12 nominal
Return loss dB > 18
Gain dB 12 nominal
Noise figure Typically 1.5
442
DTMA-1800-2100-2600-BYP1500-12-AISG

Return loss dB > 18
Gain dB 12 nominal
Input power kW < 0.1 (+ 50 dBm)| < 1.6 (+ 62 dBm) peak
Return loss dB > 18
Operating temperature range °C | °F −40 ... +65 | −40 ... +149
IP rating IP67*
DC supply V 10 - 30
Nom. 150 at 30 V
AISG out 8-pin female, IEC 60130-9 (Pin 3: RS485B, pin 5: RS485A,
pin 6: 10 – 30 V DC, pin 7: DC return, other pins: Not connected)
Mounting mm | in Wall mounting: With 4 screws (diameter: max. 8 | 0.31)
Block Diagram
ANT1 ANT2
1500+1800+2100+2600 1500+1800+2100+2600
DC DC DC DC
µP1 µP2
1800 + 1800 +
1500 2600 2600 1500
2100 2100
DTMAs
DC +
Bias-T Bias-T
BTS1 RET1 RET2 BTS2
443
DTMA-1800-2100-2600-BYP1500-12-AISG

• Supports Multi-Band, Wide-Band Mode (Configuration 1-6) and Single-
Band Mode (Configuration 7, 8, 9)
• Auto-select feature for Multi-Band or Wide-Band Mode

BYP = RF-BYPass
Technical Data
DTMA-1800-2100-2600-BYP1500-12-AISG
DTMA-1800-2100-2600-BYP1500-12-AISG
Return loss dB > 18
Gain dB 12 nominal
Return loss dB > 18
Gain dB 12 nominal
444
DTMA-1800-2100-2600-BYP1500-12-AISG

Return loss dB > 18
Gain dB 12 nominal
Return loss dB > 18
Operating temperature range °C | F −40 ... +65 | −40 ... +149
IP rating IP67
DC supply V 10 - 30
Nom. 150 at 30 V
Mounting mm | in Wall mounting: With 4 screws (diameter: max. 8 | 0.31)
Dimensions (w x h x d) mm | in 377 x 235 x 96 | 14.8 x 9.3 x.3.8
Packing Size mm | in 420 x 420 x 175 | 16.5 x 16.5 x 6.9
Block Diagram 1800 + BYP1500 2100 2600 2600 2100 1800 + BYP1500
ANT1 ANT1 ANT1 ANT2 ANT2 ANT2
Lightning Lightning Lightning Lightning Lightning Lightning

Protection Protection Protection Protection Protection Protection
DC DC
DC DC
uP1 uP2
DCS DC
DTMAs
L-Band UMTS LTE DC LTE UMTS DCS L-Band

1500 1800 2100 2600 2600 2100 1800 1500

Lightning Lightning
BTS1 RET1 RET2 BTS2
445
DTMA-UMTS-2600-BYPASS1500-12-AISG
Preliminary Issue


Technical Data
UMTS Tx Characteristics
Intermodulation products in RX band dBm < −117 (2 Tx carriers at +43 dBm)
Return loss dB > 18
UMTS Rx Characteristics
Gain dB 12 nominal
rd
dBm Typically 25
Return loss dB > 18
Gain dB 12 nominal
446
Preliminary Issue

Return loss dB > 18
IP rating IP67*
Mast mounting
Dimensions (W x H x D) mm | in 290 x 235 x 94 | 11.4 x 9.3 x 3.7
Block diagram
ANT1 ANT2
Lightning Lightning
DC DC
DC DC
uP1 uP2
L-Band UMTS LTE UMTS L-Band

2100 LTE 2600 2100 1500
1500 2600

Lightning Lightning
BTS1 RET1 RET2 BTS2

DTMAs
447
DTMA-1800-2600-BYPASS1500-12-AISG


Technical Data
1800 Tx Characteristics
Return loss dB > 18
1800 Rx Characteristics
Gain dB 12 nominal
rd
dBm Typically 25
Return loss dB > 18
Gain dB 12 nominal
448

Return loss dB > 18
IP rating IP67*
Mast mounting
Dimensions (W x H x D) mm | in 290 x 235 x 94 | 11.4 x 9.3 x 3.7
Block diagram
ANT1 ANT2
Lightning Lightning
DC DC
DC DC
uP1 uP2
L-Band DCS LTE DCS L-Band

1800 LTE 2600 1800 1500
1500 2600

Lightning Lightning
BTS1 RET1 RET2 BTS2

DTMAs
449
450
Passive Intermodulation Measuring Filter
P assive Intermodulation Measuring Filter

With Integrated Directional Coupler
PIM Measuring Filter
Introduction
Kathrein passive intermodulation filters are specified to fulfil the PIM verification requirements of manufactured
products. Thanks to their compact design, these filters can also be integrated into PIM measurement devices.
FEATURES
▪▪High PIM performance (typical PIM 3rd order higher than the guaranteed specification)
▪▪High isolation in DL path (typically −100 dB in almost all filters)
▪▪Low insertion loss
▪▪Compact filter dimensions with high electrical specifications
▪▪Very well engineered resonator topology
▪▪Integrated directional coupler in most of the measuring filters
Passive Intermodulation
Passive Intermodulation (PIM) is an unwanted signal generated at mathematical combinations by mixing of two or
more RF signals in non-linear passive components, such as antennas, connectors or cables. If two carrier frequencies f1
and f2 are transmitted from a typical cell site, PIM signals can occur at the following frequencies:
fPIM = m*f1 and ± n*f2
where ‘m’ and ‘n’ are positive integers and the sum of ‘m’ and ‘n’ is the product order. 3rd (2f1–f2) order PIM products
having the highest power level are considered the most interfering for the RX band. Usually PIM tests are performed for
3rd order products of the device under test (DUT) before deployment. Typically a maximum value of −117 dBm (small cell
base station receiver sensitivity) is needed for most of the DUTs.
RX TX
dBc
f
5f1-2f2 3f1-2f2 2f1 -f2 f1 f2 2f2-f1 3f2-2f1 5f2-2f1
452
PIM Measuring Filter
Specifications
3GPP Bands Order No. Frequency Range [MHz] IM 3rd Order [dBc]
Diplexer
A30053 < −178
B1 1920–2060 / 2110–2170
A30089* < −172
A169070 1710–1785 / 1805–1880 <−178
B3
A30100* < −172
A169210 < −178
B5 824–851 / 869–896
A30085* < −172
A30051 < −178
B7 2445–2580 / 2620–2695
A30102* < −172
B8 A30086V02 880–915 / 925–960 < −172
B11, B21 A30105V03* 1427.9–1462.9 / 1475.9–1510.9 < −172
A30088* < −172
B20 792–822 / 832–862
A30058 < −172
B22 (3500) A40010 3410–3484 / 3510–3594 < −175
B2, B4 A30101* 1710–1910 / 1930–2155 < −172
B68 A30055 698–730 / 745–793 < −175
B71 A30106 617–652 / 663–698 < −172
Triplexer
B12, B13, B14 A30087V02 698–716 / 728–764 / 776–798 < −172
* with integrated directional coupler (50 dB)
For more information and the latest data sheets please visit our website www.kathrein.com
453
454
Calculation of Wind Loading on Kathrein Base Station Antennas
In general, the wind loading of antennas is determined based on the standard EN 1991-1-4.
This European standard corresponds to the German standard DIN 1055-4.
Because of wind loading tests performed by an independent institute in 2016, in order to
determine the data sheet values, Kathrein uses a combination of wind tunnel test results
as well as an approved adaption of the form factor within the scope of the standard.
The indicated values are the frontal and the maximum wind load of the antenna. Due to the
latest determination methods, the wind load values are decreased. However, these values
are still determined in accordance with the standard EN 1991-1-4. The mechanical design
of the antennas remains unaffected.
A detailed description concerning this topic is provided in the White Paper “BASE STATION
ANTENNAS – RELIABLE WIND LOAD CALCULATION” which is available on our website.
Please note
As a result of more stringent legal regulations and judgements regarding product liability,
we are obliged to point out certain risks that may arise when products are used under
extraordinary operating conditions.The mechanical design is based on the environmental
conditions as stipulated in ETS 300 019-1-4.
The antennas may be used at locations where the anticipated peak wind velocity or gust
wind speed lies within the maximum wind speed listed in the datasheet. We warrant the
mechanical safety and electrical functionality under such conditions. The wind speeds are
defined in a
ccordance with the DIN, EN or TIA standards. This warranty makes a
llowance
for the partial safety factors specified in those standards.
Extraordinary operating conditions, such as heavy icing or exceptional d

ynamic stress
(e.g. strain caused by oscillating support structures), may result in the breakage of an
antenna or even cause it to fall to the ground. These facts must be considered during the
site planning process.The details given in our data sheets have to be followed carefully
when installing the antennas and accessories.
It should be noted that the site-specific load acting on an antenna depends on the geo
graphic location, the location-specific factors, the height over ground and how the antenna
is mounted on the mast. The site structural engineer is in charge of the correct calculation
and interpretation of the wind load at the antenna site.
Site planning and installation must be carried out by qualified and e

xperienced staff. All
relevant national safety regulations must be upheld and respected. Incorrect site p
lanning,
faulty installation, as well as interfering surroundings on site, may lead to deviations in the
electrical parameters compared to those specified in the respective data sheets.
Sales Partners
An actual list of Kathrein’s International Sales Partners can be found on our website:
www.kathrein.com
For technical information, orders or catalogues

please contact: [email protected]
© KATHREIN SE
9980000122/2,5/1218/PPE/PF | Technical data subject to change.
KATHREIN SE
Anton-Kathrein-Straße 1–3
83022 Rosenheim, Germany
Phone +49 8031 184-0
www.kathrein.com | [email protected]

Kathrein Catalogue2019 PDF

Uploaded by

Copyright:

Available Formats

Kathrein Catalogue2019 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Kathrein Catalogue2019 PDF

Uploaded by

Copyright:

Available Formats

What products does Kathrein specialize in?

What products does Kathrein specialize in?

What standards do Kathrein adhere to in product design and manufacturing?

What standards do Kathrein adhere to in product design and manufacturing?

MOBILE

BUSINESS MOBILE SPECIAL

Find out more about us at www.kathrein.com

Catalogue Issue 01/2019

Please also see additional information on inside back cover.

RET RCU, Control Devices, Site Sharing, Accessories

Electrical Accessories Splitters, Tappers

Mounting Accessories Hardware, Tools, Protection Caps

731... 742263 273 80010652 55 800108..

731651 260 742317 273 80010656 58 + 59 80010817 39

80010664 44 + 45 80010825 118 – 120

732... 782... 80010665V01 46 + 47 80010826 121 + 122

732327 266 78211293 286 80010666V01 48 + 49 80010828V01 229

78211297 286 80010678 21 80010843 220

734... 80010681 23 80010846 234

734360 280 800101.. 80010682 52 80010864 76 + 77

734361 280 80010123V03 50 + 51 80010691V01 72 + 73 80010865 78 + 79

734362 280 80010692V01 74 + 75 80010866 80 + 81

734363 280 800102.. 80010697 82 + 83 80010867 108 + 109

734364 280 80010235 224 80010698 84 + 85 80010868 110 + 111

734365 280 80010291V02 68 + 69 80010699 86 + 87 80010869 112 + 113

80010292V03 70 + 71 80010875 142 + 143

736347 233 800103.. 800107.. 80010888 32

80010305V02 19 80010713 221 80010889 33

737... 80010306V02 20 80010714 221 80010891 144 – 146

737978 267 80010368 227 80010715 40 + 41 80010898 174 – 176

80010378 26 80010728 132 + 133

738... 80010745 201

738192 232 80010746 201 800109..

738546 260 800104.. 80010753 217 80010901 34 + 35

738908 282 80010431 235 80010761 22 80010902 36 + 37

80010456V02 18 80010767 102 + 103 80010922 60 + 61

742... 80010768 104 + 105 80010964 123 – 125

742033 273 800106.. 80010769 106 + 107 80010965 126 – 128

742034 273 80010606V01 56 + 57 80010775 223 80010966 129 – 131

742113 276 80010621V02 24 80010776 223 80010991 180 – 183

742192V02 226 80010647V01 38 80010798 162 – 164 80010992 184 – 187

742226V01 42 + 43 80010651 25 80010799 168 – 170

80011... 840… 85010016 271 86010012 245

84010603 208 – 210 85010080 245 86010033 245

80020... 84010604 208 – 210 85010087 278 86010046 244

80020100 214 84010793 202 + 203 85010096 263 86010054 245

80020125 222 84010794 202 + 203 85010097 264 86010101 255

80020126 200 840370799 158 – 161 85010098 272 86010103 255

80020448 228 84040600 281 85010099 270 86010105 255

80020622 53 + 54 84040601 281 85010101 265 86010129 283

80020711 216 84040602 281 85010102 274 86010131 254

80020727 88 + 89 84040603 281 85010103 279 86010148V01 240

80020799 165 – 167 85010104 275 86010150 256

80020872 93 – 95 845… 85010108 279 86010151 256

80020892 150 – 152 84510864 64 + 65 85010110 269 86010152 256

80020899 177 – 179 84510865 66 + 67 85010111 262 86010153V01 241

84510891 136 – 138 85010205 215 86010154 246

80040... 84510892 147 – 149 85010212 260 86010155 247

80040064 96 – 98 86010156 242

3 Highbands side-by-side 1 Lowband Array interleaved